You are not logged in.

#1 2016-12-26 22:24:54

dllkevin
Member
Registered: 2015-09-27
Posts: 13

[lightdm] probem with webkit2-greeter

Hello,
I installed lightdm without encountering any error
Then I installed lightdm-webkit2-greeter
Then configured

sudo leafpad /etc/lightdm/lightdm-webkit2-greeter.conf

#
# [greeter]
# debug_mode          = Greeter theme debug mode.
# detect_theme_errors = Provide an option to load a fallback theme when theme errors are detected.
# screensaver_timeout = Blank the screen after this many seconds of inactivity.
# secure_mode         = Don't allow themes to make remote http requests.
# time_format         = A moment.js format string so the greeter can generate localized time for display.
# time_language       = Language to use when displaying the time or "auto" to use the system's language.
# webkit_theme        = Webkit theme to use.
#
# NOTE: See moment.js documentation for format string options: http://momentjs.com/docs/#/displaying/format/
#


[greeter]
debug_mode          = true
detect_theme_errors = true
screensaver_timeout = 300
secure_mode         = true
time_format         = LT
time_language       = auto
webkit_theme        = antergos

#
# [branding]
# background_images = Path to directory that contains background images for use by themes.
# logo              = Path to logo image for use by greeter themes.
# user_image        = Default user image/avatar. This is used by themes for users that have no .face image.
#
# NOTE: Paths must be accessible to the lightdm system user account (so they cannot be anywhere in /home)
#

[branding]
background_images = /usr/share/backgrounds
logo              = /usr/share/lightdm-webkit/themes/antergos/img/antergos.png
user_image        = /usr/share/lightdm-webkit/themes/antergos/img/antergos-logo-user.png

et activé le greeter
sudo leafpad /etc/lightdm/lightdm.conf

#
# General configuration
#
# start-default-seat = True to always start one seat if none are defined in the configuration
# greeter-user = User to run greeter as
# minimum-display-number = Minimum display number to use for X servers
# minimum-vt = First VT to run displays on
# lock-memory = True to prevent memory from being paged to disk
# user-authority-in-system-dir = True if session authority should be in the system location
# guest-account-script = Script to be run to setup guest account
# logind-check-graphical = True to on start seats that are marked as graphical by logind
# log-directory = Directory to log information to
# run-directory = Directory to put running state in
# cache-directory = Directory to cache to
# sessions-directory = Directory to find sessions
# remote-sessions-directory = Directory to find remote sessions
# greeters-directory = Directory to find greeters
# backup-logs = True to move add a .old suffix to old log files when opening new ones
#
[LightDM]
#start-default-seat=true
#greeter-user=lightdm
#minimum-display-number=0
#minimum-vt=7 # Setting this to a value < 7 implies security issues, see FS#46799
#lock-memory=true
#user-authority-in-system-dir=false
#guest-account-script=guest-account
logind-check-graphical=true
#log-directory=/var/log/lightdm
run-directory=/run/lightdm
#cache-directory=/var/cache/lightdm
#sessions-directory=/usr/share/lightdm/sessions:/usr/share/xsessions:/usr/share/wayland-sessions
#remote-sessions-directory=/usr/share/lightdm/remote-sessions
#greeters-directory=/usr/share/lightdm/greeters:/usr/share/xgreeters
#backup-logs=true

#
# Seat configuration
#
# Seat configuration is matched against the seat name glob in the section, for example:
# [Seat:*] matches all seats and is applied first.
# [Seat:seat0] matches the seat named "seat0".
# [Seat:seat-thin-client*] matches all seats that have names that start with "seat-thin-client".
#
# type = Seat type (xlocal, xremote, unity)
# pam-service = PAM service to use for login
# pam-autologin-service = PAM service to use for autologin
# pam-greeter-service = PAM service to use for greeters
# xserver-command = X server command to run (can also contain arguments e.g. X -special-option)
# xmir-command = Xmir server command to run (can also contain arguments e.g. Xmir -special-option)
# xserver-config = Config file to pass to X server
# xserver-layout = Layout to pass to X server
# xserver-allow-tcp = True if TCP/IP connections are allowed to this X server
# xserver-share = True if the X server is shared for both greeter and session
# xserver-hostname = Hostname of X server (only for type=xremote)
# xserver-display-number = Display number of X server (only for type=xremote)
# xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true)
# xdmcp-port = XDMCP UDP/IP port to communicate on
# xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf)
# unity-compositor-command = Unity compositor command to run (can also contain arguments e.g. unity-system-compositor -special-option)
# unity-compositor-timeout = Number of seconds to wait for compositor to start
# greeter-session = Session to load for greeter
# greeter-hide-users = True to hide the user list
# greeter-allow-guest = True if the greeter should show a guest login option
# greeter-show-manual-login = True if the greeter should offer a manual login option
# greeter-show-remote-login = True if the greeter should offer a remote login option
# user-session = Session to load for users
# allow-user-switching = True if allowed to switch users
# allow-guest = True if guest login is allowed
# guest-session = Session to load for guests (overrides user-session)
# session-wrapper = Wrapper script to run session with
# greeter-wrapper = Wrapper script to run greeter with
# guest-wrapper = Wrapper script to run guest sessions with
# display-setup-script = Script to run when starting a greeter session (runs as root)
# display-stopped-script = Script to run after stopping the display server (runs as root)
# greeter-setup-script = Script to run when starting a greeter (runs as root)
# session-setup-script = Script to run when starting a user session (runs as root)
# session-cleanup-script = Script to run when quitting a user session (runs as root)
# autologin-guest = True to log in as guest by default
# autologin-user = User to log in with by default (overrides autologin-guest)
# autologin-user-timeout = Number of seconds to wait before loading default user
# autologin-session = Session to load for automatic login (overrides user-session)
# autologin-in-background = True if autologin session should not be immediately activated
# exit-on-failure = True if the daemon should exit if this seat fails
#
[Seat:*]
#type=xlocal
#pam-service=lightdm
#pam-autologin-service=lightdm-autologin
#pam-greeter-service=lightdm-greeter
#xserver-command=X
#xmir-command=Xmir
#xserver-config=
#xserver-layout=
#xserver-allow-tcp=false
#xserver-share=true
#xserver-hostname=
#xserver-display-number=
#xdmcp-manager=
#xdmcp-port=177
#xdmcp-key=
#unity-compositor-command=unity-system-compositor
#unity-compositor-timeout=60
greeter-session=lightdm-webkit2-greeter
#greeter-hide-users=false
#greeter-allow-guest=true
#greeter-show-manual-login=false
#greeter-show-remote-login=true
#user-session=default
#allow-user-switching=true
#allow-guest=true
#guest-session=
session-wrapper=/etc/lightdm/Xsession
#greeter-wrapper=
#guest-wrapper=
#display-setup-script=
#display-stopped-script=
#greeter-setup-script=
#session-setup-script=
#session-cleanup-script=
#autologin-guest=false
#autologin-user=
#autologin-user-timeout=0
#autologin-in-background=false
#autologin-session=
#exit-on-failure=false

#
# XDMCP Server configuration
#
# enabled = True if XDMCP connections should be allowed
# port = UDP/IP port to listen for connections on
# listen-address = Host/address to listen for XDMCP connections (use all addresses if not present)
# key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf)
# hostname = Hostname to report to XDMCP clients (defaults to system hostname if unset)
#
# The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn.  Alternatively
# it can be a word and the first 7 characters are used as the key.
#
[XDMCPServer]
#enabled=false
#port=177
#listen-address=
#key=
#hostname=

#
# VNC Server configuration
#
# enabled = True if VNC connections should be allowed
# command = Command to run Xvnc server with
# port = TCP/IP port to listen for connections on
# listen-address = Host/address to listen for VNC connections (use all addresses if not present)
# width = Width of display to use
# height = Height of display to use
# depth = Color depth of display to use
#
[VNCServer]
#enabled=false
#command=Xvnc
#port=5900
#listen-address=
#width=1024
#height=768
#depth=8

when i did it
$ lightdm --test-mode --debug

i get it

error was detected in the current theme that could interfere with the system login ...

debug message with the test

[+0.00s] DEBUG: Logging to /home/encrypted/.cache/lightdm/log/lightdm.log
[+0.00s] DEBUG: Starting Light Display Manager 1.18.3, UID=1000 PID=16718
[+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
[+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.00s] DEBUG: Running in user mode
[+0.00s] DEBUG: Using Xephyr for X servers
[+0.00s] DEBUG: Registered seat module xlocal
[+0.00s] DEBUG: Registered seat module xremote
[+0.00s] DEBUG: Registered seat module unity
[+0.01s] DEBUG: Monitoring logind for seats
[+0.01s] DEBUG: New seat added from logind: seat0
[+0.01s] DEBUG: Seat seat0: Loading properties from config section Seat:*
[+0.01s] DEBUG: Seat seat0: Starting
[+0.01s] DEBUG: Seat seat0: Creating greeter session
[+0.01s] DEBUG: Loading users from org.freedesktop.Accounts
[+0.01s] DEBUG: User /org/freedesktop/Accounts/User1000 added
[+0.01s] DEBUG: Seat seat0: Creating display server of type x
[+0.01s] DEBUG: Could not run plymouth --ping: Failed to execute child process "plymouth" (No such file or directory)
[+0.01s] DEBUG: Seat seat0: Starting local X display
[+0.01s] DEBUG: DisplayServer x-1: Logging to /home/encrypted/.cache/lightdm/log/x-1.log
[+0.01s] DEBUG: DisplayServer x-1: Writing X server authority to /run/lightdm/root/:1
[+0.01s] WARNING: Error reading existing Xauthority: Failed to open file '/run/lightdm/root/:1': Permission denied
[+0.01s] WARNING: DisplayServer x-1: Failed to write authority: Failed to open X authority /run/lightdm/root/:1: Permission denied
[+0.01s] DEBUG: DisplayServer x-1: Launching X Server
[+0.01s] DEBUG: Launching process 16723: /usr/bin/Xephyr :1 -seat seat0 -auth /run/lightdm/root/:1 -nolisten tcp
[+0.01s] DEBUG: DisplayServer x-1: Waiting for ready signal from X server :1
[+0.01s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.01s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+0.01s] WARNING: Could not enumerate user data directory /var/lib/lightdm-data: Error opening directory '/var/lib/lightdm-data': Permission denied
[+0.16s] DEBUG: Got signal 10 from process 16723
[+0.16s] DEBUG: DisplayServer x-1: Got signal from X server :1
[+0.16s] DEBUG: DisplayServer x-1: Connecting to XServer :1
[+0.16s] DEBUG: Seat seat0: Display server ready, starting session authentication
[+0.16s] DEBUG: Session: Not setting XDG_VTNR
[+0.16s] DEBUG: Session pid=16729: Started with service 'lightdm-greeter', username 'encrypted'
[+0.17s] DEBUG: Session pid=16729: Authentication complete with return value 0: Success
[+0.17s] DEBUG: Seat seat0: Session authenticated, running command
[+0.17s] DEBUG: Session pid=16729: Not setting XDG_VTNR
[+0.17s] DEBUG: Session pid=16729: Running command /usr/bin/lightdm-webkit2-greeter
[+0.17s] DEBUG: Creating shared data directory /var/lib/lightdm-data/encrypted
[+0.17s] WARNING: Could not create user data directory /var/lib/lightdm-data/encrypted: Error creating directory /var/lib/lightdm-data/encrypted: Permission denied
[+0.17s] DEBUG: Session pid=16729: Logging to /home/encrypted/.cache/lightdm/log/seat0-greeter.log
[+0.52s] DEBUG: Greeter connected version=1.18.3 resettable=false
[+1.10s] DEBUG: Greeter requests data directory for user encrypted
[+1.10s] DEBUG: Creating shared data directory /var/lib/lightdm-data/encrypted
[+1.10s] WARNING: Could not create user data directory /var/lib/lightdm-data/encrypted: Error creating directory /var/lib/lightdm-data/encrypted: Permission denied

But with "lightdm-gtk-greeter" there is no problem
And I want to fix the problem with "lightdm-webkit2-greeter"
thank you in advance for your help

Offline

#2 2017-01-05 23:39:42

dllkevin
Member
Registered: 2015-09-27
Posts: 13

Re: [lightdm] probem with webkit2-greeter

up

Offline

Board footer

Powered by FluxBB