Arch Linux

Vrong

Member

Registered: 2017-01-10

Posts: 3

Sound delaying increasingly

Hi,
I have had some sort of issues with pulseaudio and my sound card. Let me explain the situation. One day the integrated sound system of my motherboard started acting weird, after exploring a few solutions, I decided to buy a new sound card supposed to work on Linux : It's a Creative Sound Blaster Audigy Fx card. I had some rough time trying to make it work on Archlinux, it appears that it ended to work using Pulseaudio and some 32bits alsa libs, I don't remember exactly but whatever.

So the last issue is : When I'm playing sound for quite some time, for example a Youtube video, the sound starts to gain delay. At the the beginning it's perfectly synchronized, but after ~10min of watching the sound has like 1 or 2 minutes latency. Same for games or other few apps.
Also the delay resets itself when closing all apps playing sound (registered to pulseaudio I guess). But it redoes the same thing after a few minutes if I started watching another video.

I must add I don't have this issue on Ubuntu 16.04. (I think I had the problem on Ubuntu, but was fixed when changing the calculating a new sample rate configuration adapted to my card). I this same pulseaudio sample configuration on Archlinux, but no success.
I tried quite a lot of things to get rid of this problem, but really can't figure out what is causing this. And it's quite annoying and frustrating...

Thank you for your help, if someone has any clue about this issue, please tell me.
Have a nice day !

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 21,790

Re: Sound delaying increasingly

Creative and "works well on linux" are two things that usually don't match.

That said, while you went into anecdotal detail about configuration you apparently did, unless you provide us with the configuration you are using, there's nothing we can do but guesswork. Therefore can you post any configuration files you adjusted? Can you post

pacmd list-cards
pacmd list-sinks
pacmd list-sink-inputs

Repost the last two at the start of a listening session and after you notice a delay. During the whole listening session, keep a terminal open somewhere and run

journalctl -f --user-unit=pulseaudio

and post any output that might be printed there as well

Post all outputs and the contents of the configuration  files in [ code ] tags.

Last edited by V1del (2017-01-12 15:32:24)

Vrong

Member

Registered: 2017-01-10

Posts: 3

Re: Sound delaying increasingly

Thanks a lot for your answer. I'll add the information :

$ pacmd list-cards

3 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_01_00.1>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "1"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0xf7080000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:01:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
		device.bus = "pci"
		device.vendor.id = "10de"
		device.vendor.name = "NVIDIA Corporation"
		device.product.id = "0fbb"
		device.product.name = "GM204 High Definition Audio Controller"
		device.string = "1"
		device.description = "GM204 High Definition Audio Controller"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: unknown)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: unknown)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 300, available: unknown)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5200, available: unknown)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 100, available: unknown)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5200, available: unknown)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 100, available: unknown)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 100, available: unknown)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5200, available: unknown)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 100, available: unknown)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 100, available: unknown)
		off: Éteint (priority 0, available: unknown)
	active profile: <off>
	ports:
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "video-display"
				device.product.name = "M2432
       "
		hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
    index: 1
	name: <alsa_card.pci-0000_02_00.0>
	driver: <module-alsa-card.c>
	owner module: 7
	properties:
		alsa.card = "2"
		alsa.card_name = "HDA Creative"
		alsa.long_card_name = "HDA Creative at 0xf7b04000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:02:00.0"
		sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:02:00.0/sound/card2"
		device.bus = "pci"
		device.vendor.id = "1102"
		device.vendor.name = "Creative Labs"
		device.product.id = "0012"
		device.product.name = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx)"
		device.string = "2"
		device.description = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx)"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Stéréo analogique Input (priority 60, available: unknown)
		output:analog-stereo: Stéréo analogique Output (priority 6000, available: unknown)
		output:analog-stereo+input:analog-stereo: Duplex stéréo analogique (priority 6060, available: unknown)
		output:analog-surround-21: Surround analogique 2.1 Output (priority 800, available: unknown)
		output:analog-surround-21+input:analog-stereo: Surround analogique 2.1 Output + Stéréo analogique Input (priority 860, available: unknown)
		output:analog-surround-40: Surround analogique 4.0 Output (priority 700, available: unknown)
		output:analog-surround-40+input:analog-stereo: Surround analogique 4.0 Output + Stéréo analogique Input (priority 760, available: unknown)
		output:analog-surround-41: Surround analogique 4.1 Output (priority 800, available: unknown)
		output:analog-surround-41+input:analog-stereo: Surround analogique 4.1 Output + Stéréo analogique Input (priority 860, available: unknown)
		output:analog-surround-50: Surround analogique 5.0 Output (priority 700, available: unknown)
		output:analog-surround-50+input:analog-stereo: Surround analogique 5.0 Output + Stéréo analogique Input (priority 760, available: unknown)
		output:analog-surround-51: Surround analogique 5.1 Output (priority 800, available: unknown)
		output:analog-surround-51+input:analog-stereo: Surround analogique 5.1 Output + Stéréo analogique Input (priority 860, available: unknown)
		off: Éteint (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.pci-0000_02_00.0.analog-stereo/#0: Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx) Stéréo analogique
	sources:
		alsa_output.pci-0000_02_00.0.analog-stereo.monitor/#0: Monitor of Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx) Stéréo analogique
		alsa_input.pci-0000_02_00.0.analog-stereo/#1: Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx) Stéréo analogique
	ports:
		analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-rear-mic: Rear Microphone (priority 8200, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-linein: Entrée-ligne (priority 8100, latency offset 0 usec, available: no)
			properties:
				
		analog-output-lineout: Line Out (priority 9900, latency offset 0 usec, available: yes)
			properties:
				
		analog-output-headphones: Casques analogiques (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
    index: 2
	name: <alsa_card.pci-0000_00_1b.0>
	driver: <module-alsa-card.c>
	owner module: 8
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xf7c10000 irq 35"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "1e20"
		device.product.name = "7 Series/C216 Chipset Family High Definition Audio Controller (Z77 Extreme4 motherboard)"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Audio interne"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Stéréo analogique Input (priority 60, available: unknown)
		output:analog-stereo: Stéréo analogique Output (priority 6000, available: unknown)
		output:analog-stereo+input:analog-stereo: Duplex stéréo analogique (priority 6060, available: unknown)
		output:analog-surround-21: Surround analogique 2.1 Output (priority 800, available: unknown)
		output:analog-surround-21+input:analog-stereo: Surround analogique 2.1 Output + Stéréo analogique Input (priority 860, available: unknown)
		output:analog-surround-40: Surround analogique 4.0 Output (priority 700, available: unknown)
		output:analog-surround-40+input:analog-stereo: Surround analogique 4.0 Output + Stéréo analogique Input (priority 760, available: unknown)
		output:analog-surround-41: Surround analogique 4.1 Output (priority 800, available: unknown)
		output:analog-surround-41+input:analog-stereo: Surround analogique 4.1 Output + Stéréo analogique Input (priority 860, available: unknown)
		output:analog-surround-50: Surround analogique 5.0 Output (priority 700, available: unknown)
		output:analog-surround-50+input:analog-stereo: Surround analogique 5.0 Output + Stéréo analogique Input (priority 760, available: unknown)
		output:analog-surround-51: Surround analogique 5.1 Output (priority 800, available: unknown)
		output:analog-surround-51+input:analog-stereo: Surround analogique 5.1 Output + Stéréo analogique Input (priority 860, available: unknown)
		output:iec958-stereo: Stéréo numérique (IEC958) Output (priority 5500, available: unknown)
		output:iec958-stereo+input:analog-stereo: Stéréo numérique (IEC958) Output + Stéréo analogique Input (priority 5560, available: unknown)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: unknown)
		output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Stéréo analogique Input (priority 5460, available: unknown)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: unknown)
		output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Stéréo analogique Input (priority 360, available: unknown)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 300, available: unknown)
		output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Stéréo analogique Input (priority 360, available: unknown)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5200, available: unknown)
		output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Stéréo analogique Input (priority 5260, available: unknown)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 100, available: unknown)
		output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) Output + Stéréo analogique Input (priority 160, available: unknown)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 100, available: unknown)
		output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) Output + Stéréo analogique Input (priority 160, available: unknown)
		off: Éteint (priority 0, available: unknown)
	active profile: <off>
	ports:
		analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-rear-mic: Rear Microphone (priority 8200, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-linein: Entrée-ligne (priority 8100, latency offset 0 usec, available: no)
			properties:
				
		analog-output-lineout: Line Out (priority 9900, latency offset 0 usec, available: no)
			properties:
				
		analog-output-headphones: Casques analogiques (priority 9000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-headphones"
		iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"

I started a long youtube video for the test.

At start (0 or unnoticeable latency)

$ pacmd list-sinks

1 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_02_00.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: 
	priority: 9059
	volume: front-left: 18352 /  28% / -33,17 dB,   front-right: 18352 /  28% / -33,17 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 19,57 ms
	max request: 4 KiB
	max rewind: 344 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stéréo
	used by: 1
	linked by: 1
	configured latency: 23,22 ms; range is 0,50 .. 1999,82 ms
	card: 1 <alsa_card.pci-0000_02_00.0>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC898 Analog"
		alsa.id = "ALC898 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "2"
		alsa.card_name = "HDA Creative"
		alsa.long_card_name = "HDA Creative at 0xf7b04000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:02:00.0"
		sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:02:00.0/sound/card2"
		device.bus = "pci"
		device.vendor.id = "1102"
		device.vendor.name = "Creative Labs"
		device.product.id = "0012"
		device.product.name = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx)"
		device.string = "front:2"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Stéréo analogique"
		device.description = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx) Stéréo analogique"
		alsa.mixer_name = "Realtek ALC898"
		alsa.components = "HDA:10ec0899,11020041,00100003"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-lineout: Line Out (priority 9900, latency offset 0 usec, available: yes)
			properties:
				
		analog-output-headphones: Casques analogiques (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-lineout>

$ pacmd list-sink-inputs

1 sink input(s) available.
    index: 2
	driver: <protocol-native.c>
	flags: START_CORKED 
	state: RUNNING
	sink: 0 <alsa_output.pci-0000_02_00.0.analog-stereo>
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	muted: no
	current latency: 67,75 ms
	requested latency: 23,22 ms
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stéréo
	resample method: (null)
	module: 10
	client: 12 <Chromium>
	properties:
		application.icon_name = "chromium-browser"
		media.name = "Playback"
		application.name = "Chromium"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "31"
		application.process.id = "6244"
		application.process.user = "vrong"
		application.process.host = "ARCHVRONG"
		application.process.binary = "chromium"
		window.x11.display = ":0"
		application.language = "fr_FR.utf8"
		application.process.machine_id = "097dbaab77d64f45a53746adb7b520d4"
		application.process.session_id = "c2"
		module-stream-restore.id = "sink-input-by-application-name:Chromium"

At the end (>40 minutes later, ~2 seconds latency)

$ pacmd list-sinks

1 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_02_00.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: 
	priority: 9059
	volume: front-left: 41944 /  64% / -11,63 dB,   front-right: 41944 /  64% / -11,63 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 9,90 ms
	max request: 1 KiB
	max rewind: 344 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stéréo
	used by: 5
	linked by: 5
	configured latency: 10,00 ms; range is 0,50 .. 1999,82 ms
	card: 1 <alsa_card.pci-0000_02_00.0>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC898 Analog"
		alsa.id = "ALC898 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "2"
		alsa.card_name = "HDA Creative"
		alsa.long_card_name = "HDA Creative at 0xf7b04000 irq 17"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:02:00.0"
		sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:02:00.0/sound/card2"
		device.bus = "pci"
		device.vendor.id = "1102"
		device.vendor.name = "Creative Labs"
		device.product.id = "0012"
		device.product.name = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx)"
		device.string = "front:2"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Stéréo analogique"
		device.description = "Sound Core3D [Sound Blaster Recon3D / Z-Series] (SB1570 SB Audigy Fx) Stéréo analogique"
		alsa.mixer_name = "Realtek ALC898"
		alsa.components = "HDA:10ec0899,11020041,00100003"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-lineout: Line Out (priority 9900, latency offset 0 usec, available: yes)
			properties:
				
		analog-output-headphones: Casques analogiques (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-lineout>

$ pacmd list-sink-inputs

5 sink input(s) available.
    index: 3
	driver: <protocol-native.c>
	flags: START_CORKED 
	state: RUNNING
	sink: 0 <alsa_output.pci-0000_02_00.0.analog-stereo>
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	muted: no
	current latency: 49,12 ms
	requested latency: 23,22 ms
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stéréo
	resample method: (null)
	module: 10
	client: 15 <Chromium>
	properties:
		application.icon_name = "chromium-browser"
		media.name = "Playback"
		application.name = "Chromium"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "31"
		application.process.id = "6244"
		application.process.user = "vrong"
		application.process.host = "ARCHVRONG"
		application.process.binary = "chromium"
		window.x11.display = ":0"
		application.language = "fr_FR.utf8"
		application.process.machine_id = "097dbaab77d64f45a53746adb7b520d4"
		application.process.session_id = "c2"
		module-stream-restore.id = "sink-input-by-application-name:Chromium"
    index: 6
	driver: <protocol-native.c>
	flags: 
	state: DRAINED
	sink: 0 <alsa_output.pci-0000_02_00.0.analog-stereo>
	volume: mono: 44585 /  68% / -10,04 dB
	        balance 0,00
	muted: no
	current latency: 0,00 ms
	requested latency: 10,00 ms
	sample spec: s16le 1ch 44100Hz
	channel map: mono
	             Mono
	resample method: copy
	module: 10
	client: 24 <ALSA plug-in [wine-preloader]>
	properties:
		media.name = "ALSA Playback"
		application.name = "ALSA plug-in [wine-preloader]"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "31"
		application.process.id = "8141"
		application.process.user = "vrong"
		application.process.host = "ARCHVRONG"
		application.process.binary = "wine-preloader"
		application.language = "fr_FR.utf8"
		window.x11.display = ":0"
		application.process.machine_id = "097dbaab77d64f45a53746adb7b520d4"
		application.process.session_id = "c2"
		module-stream-restore.id = "sink-input-by-application-name:ALSA plug-in [wine-preloader]"
    index: 8
	driver: <protocol-native.c>
	flags: START_CORKED 
	state: RUNNING
	sink: 0 <alsa_output.pci-0000_02_00.0.analog-stereo>
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	muted: no
	current latency: 0,66 ms
	requested latency: 10,00 ms
	sample spec: float32le 2ch 44100Hz
	channel map: front-left,front-right
	             Stéréo
	resample method: copy
	module: 10
	client: 26 <DOOM>
	properties:
		media.name = "audio stream #1"
		application.name = "DOOM"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "31"
		application.process.id = "8373"
		application.process.user = "vrong"
		application.process.host = "ARCHVRONG"
		application.process.binary = "wine64-preloader"
		application.language = "fr_FR.utf8"
		window.x11.display = ":0"
		application.process.machine_id = "097dbaab77d64f45a53746adb7b520d4"
		application.process.session_id = "c2"
		module-stream-restore.id = "sink-input-by-application-name:DOOM"
    index: 24
	driver: <protocol-native.c>
	flags: START_CORKED 
	state: RUNNING
	sink: 0 <alsa_output.pci-0000_02_00.0.analog-stereo>
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	muted: no
	current latency: 22,99 ms
	requested latency: 10,00 ms
	sample spec: float32le 2ch 44100Hz
	channel map: front-left,front-right
	             Stéréo
	resample method: copy
	module: 10
	client: 26 <DOOM>
	properties:
		media.name = "audio stream #17"
		application.name = "DOOM"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "31"
		application.process.id = "8373"
		application.process.user = "vrong"
		application.process.host = "ARCHVRONG"
		application.process.binary = "wine64-preloader"
		application.language = "fr_FR.utf8"
		window.x11.display = ":0"
		application.process.machine_id = "097dbaab77d64f45a53746adb7b520d4"
		application.process.session_id = "c2"
		module-stream-restore.id = "sink-input-by-application-name:DOOM"
    index: 29
	driver: <protocol-native.c>
	flags: START_CORKED 
	state: RUNNING
	sink: 0 <alsa_output.pci-0000_02_00.0.analog-stereo>
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	muted: no
	current latency: 56,67 ms
	requested latency: 10,00 ms
	sample spec: float32le 2ch 44100Hz
	channel map: front-left,front-right
	             Stéréo
	resample method: copy
	module: 10
	client: 26 <DOOM>
	properties:
		media.name = "audio stream #22"
		application.name = "DOOM"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "31"
		application.process.id = "8373"
		application.process.user = "vrong"
		application.process.host = "ARCHVRONG"
		application.process.binary = "wine64-preloader"
		application.language = "fr_FR.utf8"
		window.x11.display = ":0"
		application.process.machine_id = "097dbaab77d64f45a53746adb7b520d4"
		application.process.session_id = "c2"
		module-stream-restore.id = "sink-input-by-application-name:DOOM"

journal output :

-- Logs begin at Sat 2016-04-16 17:52:04 CEST. --
janv. 11 21:30:12 ARCHVRONG systemd[496]: Starting Sound Service...
janv. 11 21:30:16 ARCHVRONG pulseaudio[865]: W: [pulseaudio] authkey.c: Failed to open cookie file '/home/vrong/.config/pulse/cookie': Aucun fichier ou dossier de ce type
janv. 11 21:30:16 ARCHVRONG pulseaudio[865]: W: [pulseaudio] authkey.c: Failed to load authentication key '/home/vrong/.config/pulse/cookie': Aucun fichier ou dossier de ce type
janv. 11 21:30:16 ARCHVRONG systemd[496]: Started Sound Service.
janv. 11 21:30:54 ARCHVRONG systemd[496]: Stopping Sound Service...
janv. 11 21:30:54 ARCHVRONG systemd[496]: Stopped Sound Service.
-- Reboot --
janv. 12 18:34:24 ARCHVRONG systemd[5936]: Starting Sound Service...
janv. 12 18:34:31 ARCHVRONG pulseaudio[6032]: W: [pulseaudio] authkey.c: Failed to open cookie file '/home/vrong/.config/pulse/cookie': Aucun fichier ou dossier de ce type
janv. 12 18:34:31 ARCHVRONG pulseaudio[6032]: W: [pulseaudio] authkey.c: Failed to load authentication key '/home/vrong/.config/pulse/cookie': Aucun fichier ou dossier de ce type
janv. 12 18:34:32 ARCHVRONG systemd[5936]: Started Sound Service.

Also, I have done these tests with pulseaudio default configuration (doesn't to make a difference using my custom Ubuntu one). However there are the adjustments I did :

default-sample-rate=44096
default-fragments = 2
default-fragment-size-msec = 125
resample-method = src-sinc-best-quality
default-sample-format = float32ne
nice-level = -20

One more thing, the trick I use to reset the latency is to turn off and back on the audio card in pulseaudio configuration panel.
Thanks again !

Extra question: What are brands/sound devices that "works well on linux" ? If I can't get this fixed I'll just end buying a new one ...