You are not logged in.
EDIT 14:00 (CET) 2017-01-17: I just stumbled upon this post in the Fedora forums http://forums.fedoraforum.org/showthread.php?t=310207 which describes the exact same problem as me (BitLocker on the drive, thousands of ata errors) so I think BitLocker is the "culprit". I can try disabling it but I would prefer to find the solution so that libata stop spitting errors.
I've changed the title of my post to reflect better reflect the problem.
For more information about my BitLocker setup, I'm using aes-xts-256 with just a passphrase (I don't have a TPM chipset).
Hello!
I've recently reinstalled Arch on my system and I get a lot (really a lot) of ata errors at boot. Here's what dmesg shows:
[ 1.416380] ata2.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0
[ 1.416420] ata2.00: irq_stat 0x40000008
[ 1.416443] ata2.00: failed command: READ FPDMA QUEUED
[ 1.416473] ata2.00: cmd 60/08:08:d0:2f:cf/00:00:1d:00:00/40 tag 1 ncq dma 4096 in
res 41/04:00:20:98:a7/00:00:3b:00:00/40 Emask 0x401 (device error) <F>
[ 1.416548] ata2.00: status: { DRDY ERR }
[ 1.416570] ata2.00: error: { ABRT }
[ 1.416833] ata2.00: supports DRM functions and may not be fully accessible
[ 1.429096] ata2.00: supports DRM functions and may not be fully accessible
[ 1.434659] random: fast init done
[ 1.441038] ata2.00: configured for UDMA/133
[ 1.441072] ata2: EH complete
[ 1.463098] ata2.00: exception Emask 0x0 SAct 0x8 SErr 0x0 action 0x0
[ 1.463136] ata2.00: irq_stat 0x40000008
[ 1.463158] ata2.00: failed command: READ FPDMA QUEUED
[ 1.463189] ata2.00: cmd 60/08:18:d0:2f:cf/00:00:1d:00:00/40 tag 3 ncq dma 4096 in
res 41/04:00:20:98:a7/00:00:3b:00:00/40 Emask 0x401 (device error) <F>
[ 1.463270] ata2.00: status: { DRDY ERR }
[ 1.463290] ata2.00: error: { ABRT }
[ 1.463612] ata2.00: supports DRM functions and may not be fully accessible
[ 1.475954] ata2.00: supports DRM functions and may not be fully accessible
[ 1.487986] ata2.00: configured for UDMA/133
[ 1.488005] ata2: EH complete
[ 1.490232] usb 3-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.509750] ata2.00: exception Emask 0x0 SAct 0x100 SErr 0x0 action 0x0
[ 1.509789] ata2.00: irq_stat 0x40000008
[ 1.509811] ata2.00: failed command: READ FPDMA QUEUED
[ 1.509841] ata2.00: cmd 60/08:40:d0:2f:cf/00:00:1d:00:00/40 tag 8 ncq dma 4096 in
res 41/04:00:20:98:a7/00:00:3b:00:00/40 Emask 0x401 (device error) <F>
[ 1.509916] ata2.00: status: { DRDY ERR }
[ 1.509938] ata2.00: error: { ABRT }
[ 1.510203] ata2.00: supports DRM functions and may not be fully accessible
[ 1.522536] ata2.00: supports DRM functions and may not be fully accessible
[ 1.534597] ata2.00: configured for UDMA/133
[ 1.534615] ata2: EH complete
[ 1.534683] ata2.00: Enabling discard_zeroes_data
[ 1.556441] ata2.00: NCQ disabled due to excessive errors
[ 1.556444] ata2.00: exception Emask 0x0 SAct 0x1000 SErr 0x0 action 0x0
[ 1.556488] ata2.00: irq_stat 0x40000008
[ 1.556513] ata2.00: failed command: READ FPDMA QUEUED
[ 1.556547] ata2.00: cmd 60/08:60:d0:2f:cf/00:00:1d:00:00/40 tag 12 ncq dma 4096 in
res 41/04:00:20:98:a7/00:00:3b:00:00/40 Emask 0x401 (device error) <F>
[ 1.556632] ata2.00: status: { DRDY ERR }
[ 1.556656] ata2.00: error: { ABRT }
[ 1.556956] ata2.00: supports DRM functions and may not be fully accessible
[ 1.569300] ata2.00: supports DRM functions and may not be fully accessible
[ 1.581319] ata2.00: configured for UDMA/133
[ 1.581338] ata2: EH complete
[ 1.581402] ata2.00: Enabling discard_zeroes_data
[ 1.593547] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.593587] ata2.00: irq_stat 0x40000001
[ 1.593611] ata2.00: failed command: READ DMA EXT
[ 1.593641] ata2.00: cmd 25/00:08:d0:2f:cf/00:00:1d:00:00/e0 tag 29 dma 4096 in
res 51/04:00:d0:2f:cf/00:00:1d:00:00/60 Emask 0x1 (device error)
[ 1.593717] ata2.00: status: { DRDY ERR }
[ 1.593739] ata2.00: error: { ABRT }
[ 1.593985] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.594015] ata2.00: supports DRM functions and may not be fully accessible
[ 1.600950] usbcore: registered new interface driver usbhid
[ 1.600952] usbhid: USB HID core driver
[ 1.601691] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C539.0001/input/input2
[ 1.606496] ata2.00: supports DRM functions and may not be fully accessible
[ 1.618498] ata2.00: configured for UDMA/133
[ 1.618516] ata2: EH complete
[ 1.630279] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.631158] ata2.00: irq_stat 0x40000001
[ 1.632013] ata2.00: failed command: READ DMA EXT
[ 1.632862] ata2.00: cmd 25/00:08:d0:2f:cf/00:00:1d:00:00/e0 tag 14 dma 4096 in
res 51/04:00:d0:2f:cf/00:00:1d:00:00/60 Emask 0x1 (device error)
[ 1.634617] ata2.00: status: { DRDY ERR }
[ 1.635434] ata2.00: error: { ABRT }
[ 1.636469] ata2.00: supports DRM functions and may not be fully accessible
[ 1.648800] ata2.00: supports DRM functions and may not be fully accessible
[ 1.656897] tsc: Refined TSC clocksource calibration: 3400.023 MHz
[ 1.656905] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x31026473058, max_idle_ns: 440795314252 ns
[ 1.657039] hid-generic 0003:046D:C539.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input0
[ 1.657347] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.1/0003:046D:C539.0002/input/input3
[ 1.660858] ata2.00: configured for UDMA/133
[ 1.660869] sd 1:0:0:0: [sdb] tag#14 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 1.660872] sd 1:0:0:0: [sdb] tag#14 Sense Key : 0x5 [current]
[ 1.660874] sd 1:0:0:0: [sdb] tag#14 ASC=0x21 ASCQ=0x4
[ 1.660877] sd 1:0:0:0: [sdb] tag#14 CDB: opcode=0x28 28 00 1d cf 2f d0 00 00 08 00
[ 1.660879] blk_update_request: I/O error, dev sdb, sector 500117456
[ 1.661719] ata2: EH complete
[ 1.661796] ata2.00: Enabling discard_zeroes_data
[ 1.663533] usb 3-1.2: new full-speed USB device number 4 using ehci-pci
[ 1.673582] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.674405] ata2.00: irq_stat 0x40000001
[ 1.675210] ata2.00: failed command: READ DMA EXT
[ 1.676019] ata2.00: cmd 25/00:08:d0:2f:cf/00:00:1d:00:00/e0 tag 20 dma 4096 in
res 51/04:00:d0:2f:cf/00:00:1d:00:00/60 Emask 0x1 (device error)
[ 1.677659] ata2.00: status: { DRDY ERR }
[ 1.678429] ata2.00: error: { ABRT }
[ 1.679475] ata2.00: supports DRM functions and may not be fully accessible
[ 1.691874] ata2.00: supports DRM functions and may not be fully accessible
[ 1.703945] ata2.00: configured for UDMA/133
[ 1.703963] ata2: EH complete
[ 1.713982] hid-generic 0003:046D:C539.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input1
[ 1.716160] hid-generic 0003:046D:C539.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input2
[ 1.716880] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.717693] ata2.00: irq_stat 0x40000001
[ 1.718488] ata2.00: failed command: READ DMA EXT
[ 1.719288] ata2.00: cmd 25/00:08:d0:2f:cf/00:00:1d:00:00/e0 tag 4 dma 4096 in
res 51/04:00:d0:2f:cf/00:00:1d:00:00/60 Emask 0x1 (device error)
[ 1.720903] ata2.00: status: { DRDY ERR }
[ 1.721687] ata2.00: error: { ABRT }
[ 1.722717] ata2.00: supports DRM functions and may not be fully accessible
[ 1.735078] ata2.00: supports DRM functions and may not be fully accessible
[ 1.747135] ata2.00: configured for UDMA/133
[ 1.747154] ata2: EH complete
[ 1.747222] ata2.00: Enabling discard_zeroes_data
[ 1.763564] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.764424] ata2.00: irq_stat 0x40000001
[ 1.765258] ata2.00: failed command: READ DMA EXT
[ 1.766094] ata2.00: cmd 25/00:08:d0:2f:cf/00:00:1d:00:00/e0 tag 8 dma 4096 in
res 51/04:00:d0:2f:cf/00:00:1d:00:00/60 Emask 0x1 (device error)
[ 1.767779] ata2.00: status: { DRDY ERR }
[ 1.768601] ata2.00: error: { ABRT }
[ 1.769714] ata2.00: supports DRM functions and may not be fully accessible
[ 1.770594] input: Cooler Master Technology Inc. MASTERKEYS PRO S as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:2516:003C.0004/input/input4
[ 1.782066] ata2.00: supports DRM functions and may not be fully accessible
[ 1.794116] ata2.00: configured for UDMA/133
[ 1.794134] ata2: EH complete
[ 1.806931] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.807767] ata2.00: irq_stat 0x40000001
[ 1.808586] ata2.00: failed command: READ DMA EXT
[ 1.809412] ata2.00: cmd 25/00:08:d0:2f:cf/00:00:1d:00:00/e0 tag 24 dma 4096 in
res 51/04:00:d0:2f:cf/00:00:1d:00:00/60 Emask 0x1 (device error)
[ 1.811095] ata2.00: status: { DRDY ERR }
[ 1.811884] ata2.00: error: { ABRT }
[ 1.812952] ata2.00: supports DRM functions and may not be fully accessible
[ 1.825312] ata2.00: supports DRM functions and may not be fully accessible
[ 1.827007] hid-generic 0003:2516:003C.0004: input,hidraw3: USB HID v1.11 Keyboard [Cooler Master Technology Inc. MASTERKEYS PRO S] on usb-0000:00:1a.0-1.2/input0
[ 1.828333] hid-generic 0003:2516:003C.0005: hiddev0,hidraw4: USB HID v1.11 Device [Cooler Master Technology Inc. MASTERKEYS PRO S] on usb-0000:00:1a.0-1.2/input1
[ 1.830067] input: Cooler Master Technology Inc. MASTERKEYS PRO S as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.2/0003:2516:003C.0006/input/input5
[ 1.837371] ata2.00: configured for UDMA/133
[ 1.837391] ata2: EH complete
[ 1.837459] ata2.00: Enabling discard_zeroes_data
[ 1.850295] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.851135] ata2.00: irq_stat 0x40000001
[ 1.851955] ata2.00: failed command: READ DMA EXT
[ 1.852779] ata2.00: cmd 25/00:08:d0:2f:cf/00:00:1d:00:00/e0 tag 28 dma 4096 in
res 51/04:00:d0:2f:cf/00:00:1d:00:00/60 Emask 0x1 (device error)
[ 1.854459] ata2.00: status: { DRDY ERR }
[ 1.855243] ata2.00: error: { ABRT }
[ 1.856306] ata2.00: supports DRM functions and may not be fully accessible
[ 1.868702] ata2.00: supports DRM functions and may not be fully accessible
[ 1.880764] ata2.00: configured for UDMA/133
[ 1.880783] ata2: EH complete
[ 1.883618] hid-generic 0003:2516:003C.0006: input,hidraw5: USB HID v1.11 Keyboard [Cooler Master Technology Inc. MASTERKEYS PRO S] on usb-0000:00:1a.0-1.2/input2
[ 1.893592] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1.894382] ata2.00: irq_stat 0x40000001
[ 1.895151] ata2.00: failed command: READ DMA EXT
[ 1.895919] ata2.00: cmd 25/00:08:d0:2f:cf/00:00:1d:00:00/e0 tag 13 dma 4096 in
res 51/04:00:d0:2f:cf/00:00:1d:00:00/60 Emask 0x1 (device error)
[ 1.897495] ata2.00: status: { DRDY ERR }
[ 1.898245] ata2.00: error: { ABRT }
[ 1.899281] ata2.00: supports DRM functions and may not be fully accessible
[ 1.911657] ata2.00: supports DRM functions and may not be fully accessible
[ 1.923724] ata2.00: configured for UDMA/133
[ 1.923734] sd 1:0:0:0: [sdb] tag#13 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 1.923737] sd 1:0:0:0: [sdb] tag#13 Sense Key : 0x5 [current]
[ 1.923739] sd 1:0:0:0: [sdb] tag#13 ASC=0x21 ASCQ=0x4
[ 1.923741] sd 1:0:0:0: [sdb] tag#13 CDB: opcode=0x28 28 00 1d cf 2f d0 00 00 08 00
[ 1.923743] blk_update_request: I/O error, dev sdb, sector 500117456
[ 1.924532] Buffer I/O error on dev sdb, logical block 62514682, async page read
[ 1.925351] ata2: EH completeAnd this wall of errors repeat itself 3 or 4 times in the log, the whole log is avialable here: http://pastebin.com/V49qYCXn
Here's the hardware that might be relevant to the problem:
- Motherboard: MSI Z77A-G45
- PSU: Be Quiet! Straight Power 10 700W
- SSD 1: OCZ Agility 3 120GB
- SSD 2: Crucial MX100 256GB
- HDD 1: Seagate Barracuda 7200 1TB
- HDD 2: Seagate Barracuda 7200 2TB
The disk are connected as such :
sata0 (6Gb/s): SSD 1 (sda - Arch)
sata1 (6Gb/s): SSD 2 (sdb - Windows)
sata2 (3Gb/s): HDD 1 (sdc - Arch)
sata3 (3Gb/s): HDD 2 (sdd - Windows)
ata2.00 is the Crucial MX100 256GB with Windows installed on it, so the errors I get are on a disk Arch is not using. The disk is perfectly working in Windows.
I'm dualbooting Windows 10, which uses SSD 2 and HDD 2. While Arch is installed with full disk encryption (LVM on LUKS, boot partition non encrypted) on SSD 1 and HDD 1, here's the output of lsblk:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 119.2G 0 disk
|-sda1 8:1 0 512M 0 part /boot
`-sda2 8:2 0 118.8G 0 part
`-lvm0 254:0 0 118.8G 0 crypt
|-vol0-swap 254:1 0 8G 0 lvm [SWAP]
`-vol0-root 254:2 0 110.8G 0 lvm /
sdb 8:16 0 238.5G 0 disk
|-sdb1 8:17 0 450M 0 part
|-sdb2 8:18 0 100M 0 part
|-sdb3 8:19 0 16M 0 part
`-sdb4 8:20 0 237.9G 0 part
sdc 8:32 0 931.5G 0 disk
`-sdc1 8:33 0 931.5G 0 part
`-lvm1 254:3 0 931.5G 0 crypt
`-vol1-home 254:4 0 931.5G 0 lvm /home
sdd 8:48 0 1.8T 0 disk
`-sdd1 8:49 0 1.8T 0 partNow for the "story", I've reinstalled Arch because I had fucked up my previous install a month ago when I was training myself with full disk encryption. I've decided it was time to install it for good this time.
A month ago those ata errors were not present so here's what changed during this period:
- The disk were previously connected as such:
sata0 (6Gb/s): SSD 2 (sda - Windows)
sata1 (6Gb/s): SSD 1 (sdb - Arch)
sata2 (3Gb/s): HDD 2 (sdc - Windows)
sata3 (3Gb/s): HDD 1 (sdd - Arch)
- I swaped SSD 2 & 1 as well as HDD 2 & 1 (I just swaped the sata connector on which the cables were connected)
- I reinstalled Windows 10, enabling BitLocker on both the SSD and the HDD (which I had not previously)
- That's it.
What I've tried after reading a lot of material on this problem and did not work:
- Changing the SATA cable
- Using another power cable (I can connect up to 4 SATA cables on my PSU)
- Changing the SATA port on which the drive is connected, I've tried this configuration:
sata0 (6Gb/s): SSD 1 (sda - Arch)
sata2 (3Gb/s): SSD 2 (sdb - Windows)
sata4 (3Gb/s): HDD 1 (sdc - Arch)
sata5 (3Gb/s): HDD 2 (sdd - Windows)
- Updating the firmware of the SSD, I've gone from MU01 to MU02
- I've made 3 SMART test, they all completed without error, here's the result of sudo smartctl -a /dev/sdb:
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.8.13-1-ARCH] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Crucial/Micron MX100/MX200/M5x0/M600 Client SSDs
Device Model: Crucial_CT256MX100SSD1
Serial Number: 14490DF503C3
LU WWN Device Id: 5 00a075 10df503c3
Firmware Version: MU02
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Mon Jan 16 23:25:15 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1190) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 3) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
5 Reallocate_NAND_Blk_Cnt 0x0033 100 100 000 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3630
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 671
171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
173 Ave_Block-Erase_Count 0x0032 097 097 000 Old_age Always - 100
174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 81
180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always - 2159
183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 2
184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 065 041 000 Old_age Always - 35 (Min/Max 18/59)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
202 Percent_Lifetime_Used 0x0031 097 097 000 Pre-fail Offline - 3
206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0
210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0
246 Total_Host_Sector_Write 0x0032 100 100 000 Old_age Always - 16703325493
247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 888342073
248 Bckgnd_Program_Page_Cnt 0x0032 100 100 000 Old_age Always - 1164239486
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Conveyance offline Completed without error 00% 3628 -
# 2 Extended offline Completed without error 00% 3628 -
# 3 Short offline Completed without error 00% 3628 -
# 4 Vendor (0xff) Completed without error 00% 2628 -
# 5 Vendor (0xff) Completed without error 00% 1984 -
# 6 Vendor (0xff) Completed without error 00% 1918 -
# 7 Vendor (0xff) Completed without error 00% 1860 -
# 8 Vendor (0xff) Completed without error 00% 1846 -
# 9 Vendor (0xff) Completed without error 00% 1804 -
#10 Vendor (0xff) Completed without error 00% 1685 -
#11 Vendor (0xff) Completed without error 00% 1384 -
#12 Vendor (0xff) Completed without error 00% 1372 -
#13 Vendor (0xff) Completed without error 00% 1354 -
#14 Vendor (0xff) Completed without error 00% 1337 -
#15 Vendor (0xff) Completed without error 00% 1100 -
#16 Vendor (0xff) Completed without error 00% 783 -
#17 Vendor (0xff) Completed without error 00% 436 -
#18 Vendor (0xff) Completed without error 00% 394 -
#19 Vendor (0xff) Completed without error 00% 363 -
#20 Vendor (0xff) Completed without error 00% 301 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.So I'm pretty much out of luck, do you have an idea of where to search for? Any help is appreciated!
I could try another PSU, but the Be Quiet! one is pretty much new (bought in September 2016) and I was already using it the last time Arch worked without throwing errors.
Thanks for taking time to read me.
Last edited by PlqnctoN (2017-01-17 13:18:04)
Offline