Arch Linux

polyakov84

Member

Registered: 2017-02-16

Posts: 3

Upower displays incorrect information

Upower displays incorrect information since acpi.

$ acpi
Battery 0: Discharging, 95%, 03:14:14 remaining

$ upower -d
Device: /org/freedesktop/UPower/devices/line_power_AC0
  native-path:          AC0
  power supply:         yes
  updated:              Чтв 16 Фев 2017 21:30:32 (47 seconds ago)
  has history:          no
  has statistics:       no
  line-power
    warning-level:       none
    online:              no
    icon-name:          'ac-adapter-symbolic'

Device: /org/freedesktop/UPower/devices/battery_BAT0
  native-path:          BAT0
  vendor:               ASUSTeK
  model:                N56-52
  power supply:         yes
  updated:              Чтв 16 Фев 2017 21:30:33 (46 seconds ago)
  has history:          yes
  has statistics:       yes
  battery
    present:             yes
    rechargeable:        yes
    state:               discharging
    warning-level:       none
    energy:              46,975 Wh
    energy-empty:        0 Wh
    energy-full:         48,795 Wh
    energy-full-design:  48,84 Wh
    energy-rate:         4,695 W
    voltage:             11,1 V
    time to empty:       10,0 hours
    percentage:          96%
    capacity:            99,9079%
    technology:          lithium-ion
    icon-name:          'battery-full-symbolic'
  History (rate):
    1487273432  4,695   discharging

Device: /org/freedesktop/UPower/devices/DisplayDevice
  power supply:         yes
  updated:              Чтв 16 Фев 2017 21:30:32 (47 seconds ago)
  has history:          no
  has statistics:       no
  battery
    present:             yes
    state:               discharging
    warning-level:       none
    energy:              46,975 Wh
    energy-full:         48,795 Wh
    energy-rate:         4,695 W
    time to empty:       10,0 hours
    percentage:          96%
    icon-name:          'battery-full-symbolic'

Daemon:
  daemon-version:  0.99.5
  on-battery:      yes
  lid-is-closed:   no
  lid-is-present:  yes
  critical-action: PowerOff

It displays just after unpluging AC adapter and delay of 5 - 10 secs.
As you can see upower displays time to empty as 10 hours but acpi just about 3.

After few minutes it looks like upower takes info from acpi with big delay, because it displays info like acpi a few minutes ago.

Is it normal for upower?
Could you give some advise?

Last edited by polyakov84 (2017-02-16 19:40:28)