You are not logged in.
- Topics: Active | Unanswered
#1 2017-02-18 11:08:33
- 3SKRIMA
- Member
- Registered: 2017-02-18
- Posts: 5
[Solved]Fatal Error: OpenGL GLX extension not supported by display
Hello Arch Users,
I have problem running my application specifically Steam can't solve it anymore. I googled it everywhere but can't find any solution yet so I came here badly need your help.
So Opening steam on terminal this came up
$ steam
/home/therma/.local/share/Steam/steam.sh: line 154: VERSION_ID: unbound variable
/home/therma/.local/share/Steam/steam.sh: line 154: VERSION_ID: unbound variable
Running Steam on arch 64-bit
/home/therma/.local/share/Steam/steam.sh: line 154: VERSION_ID: unbound variable
STEAM_RUNTIME is enabled automatically
Installing breakpad exception handler for appid(steam)/version(1484790260)
Installing breakpad exception handler for appid(steam)/version(1484790260)
Installing breakpad exception handler for appid(steam)/version(1484790260)
OpenGL GLX extension not supported by displayMain.cpp (315) : Assertion Failed: Fatal Error: OpenGL GLX extension not supported by display
Assert( Assertion Failed: Fatal Error: OpenGL GLX extension not supported by display ):Main.cpp:315
Installing breakpad exception handler for appid(steam)/version(1484790260)
assert_20170218184211_5.dmp[6963]: Uploading dump (out-of-process)
/tmp/dumps/assert_20170218184211_5.dmp
assert_20170218184211_5.dmp[6963]: Finished uploading minidump (out-of-process): success = yes
assert_20170218184211_5.dmp[6963]: response: CrashID=bp-385f8181-93ea-4cc4-aa10-1db042170218
assert_20170218184211_5.dmp[6963]: file ''/tmp/dumps/assert_20170218184211_5.dmp'', upload yes: ''CrashID=bp-385f8181-93ea-4cc4-aa10-1db042170218''My Info:
$ lspci
00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07)
00:04.0 Signal processing controller: Intel Corporation Skylake Processor Thermal Subsystem (rev 08)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)
00:15.1 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Device 9d10 (rev f1)
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter$ lspci -v -s `lspci | awk '/VGA/{print $1}'`
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 1c7d
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at de000000 (64-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915Logs:
$ cat /var/log/Xorg.0.log[ 34.247]
X.Org X Server 1.19.1
Release Date: 2017-01-11
[ 34.248] X Protocol Version 11, Revision 0
[ 34.248] Build Operating System: Linux 4.8.14-1-ARCH x86_64
[ 34.248] Current Operating System: Linux THERMA 4.9.8-1-ARCH #1 SMP PREEMPT Mon Feb 6 12:59:40 CET 2017 x86_64
[ 34.248] Kernel command line: \vmlinuz-linux rw root=/dev/mapper/vg0-root cryptdevice=/dev/sda2:luks:allow-discards quiet splash initrd=/initramfs-linux.img pci=nomsi
[ 34.249] Build Date: 14 February 2017 03:36:07AM
[ 34.249]
[ 34.249] Current version of pixman: 0.34.0
[ 34.249] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 34.249] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 34.250] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 18 15:32:50 2017
[ 34.337] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 34.337] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 34.413] (==) No Layout section. Using the first Screen section.
[ 34.413] (==) No screen section available. Using defaults.
[ 34.413] (**) |-->Screen "Default Screen Section" (0)
[ 34.413] (**) | |-->Monitor "<default monitor>"
[ 34.430] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 34.430] (**) | |-->Device "Intel Graphics"
[ 34.430] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 34.430] (==) Automatically adding devices
[ 34.430] (==) Automatically enabling devices
[ 34.430] (==) Automatically adding GPU devices
[ 34.430] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 34.469] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 34.469] Entry deleted from font path.
[ 34.487] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 34.487] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 34.487] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 34.504] (II) Loader magic: 0x822d60
[ 34.504] (II) Module ABI versions:
[ 34.504] X.Org ANSI C Emulation: 0.4
[ 34.504] X.Org Video Driver: 23.0
[ 34.504] X.Org XInput driver : 24.1
[ 34.504] X.Org Server Extension : 10.0
[ 34.506] (++) using VT number 1
[ 34.506] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 34.512] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 34.513] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 34.515] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 34.519] (--) PCI:*(0:0:2:0) 8086:1916:1043:1c7d rev 7, Mem @ 0xde000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 34.519] (II) Open ACPI successful (/var/run/acpid.socket)
[ 34.520] (II) LoadModule: "glx"
[ 34.579] (WW) Warning, couldn't open module glx
[ 34.579] (II) UnloadModule: "glx"
[ 34.579] (II) Unloading glx
[ 34.579] (EE) Failed to load module "glx" (module does not exist, 0)
[ 34.579] (II) LoadModule: "intel"
[ 34.579] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 34.640] (II) Module intel: vendor="X.Org Foundation"
[ 34.640] compiled for 1.19.1, module version = 2.99.917
[ 34.640] Module class: X.Org Video Driver
[ 34.640] ABI class: X.Org Video Driver, version 23.0
[ 34.640] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 34.640] (II) intel: Driver for Intel(R) HD Graphics
[ 34.640] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 34.640] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 34.642] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
[ 34.642] (II) intel(0): SNA compiled from 2.99.917-757-g93942b7d
[ 34.645] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 520
[ 34.645] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[ 34.646] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 34.646] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 34.646] (==) intel(0): RGB weight 888
[ 34.646] (==) intel(0): Default visual is TrueColor
[ 34.646] (**) intel(0): Option "TearFree" "true"
[ 34.647] (II) intel(0): Output eDP1 has no monitor section
[ 34.648] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 34.648] (II) intel(0): Enabled output eDP1
[ 34.648] (II) intel(0): Output DP1 has no monitor section
[ 34.648] (II) intel(0): Enabled output DP1
[ 34.648] (II) intel(0): Output HDMI1 has no monitor section
[ 34.649] (II) intel(0): Enabled output HDMI1
[ 34.649] (II) intel(0): Output HDMI2 has no monitor section
[ 34.649] (II) intel(0): Enabled output HDMI2
[ 34.649] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 34.649] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 34.649] (II) intel(0): Enabled output VIRTUAL1
[ 34.649] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
[ 34.651] (**) intel(0): TearFree enabled
[ 34.651] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 34.651] (==) intel(0): DPI set to (96, 96)
[ 34.651] (II) Loading sub module "dri3"
[ 34.651] (II) LoadModule: "dri3"
[ 34.651] (II) Module "dri3" already built-in
[ 34.651] (II) Loading sub module "dri2"
[ 34.651] (II) LoadModule: "dri2"
[ 34.651] (II) Module "dri2" already built-in
[ 34.651] (II) Loading sub module "present"
[ 34.651] (II) LoadModule: "present"
[ 34.651] (II) Module "present" already built-in
[ 34.652] (==) Depth 24 pixmap format is 32 bpp
[ 34.692] (II) intel(0): SNA initialized with Skylake (gen9) backend
[ 34.692] (==) intel(0): Backing store enabled
[ 34.692] (==) intel(0): Silken mouse enabled
[ 34.693] (II) intel(0): HW Cursor enabled
[ 34.693] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 34.695] (==) intel(0): DPMS enabled
[ 34.695] (==) intel(0): Display hotplug detection enabled
[ 34.696] (II) intel(0): [DRI2] Setup complete
[ 34.696] (II) intel(0): [DRI2] DRI driver: i965
[ 34.696] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 34.696] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 34.696] (II) intel(0): hardware support for Present enabled
[ 34.696] (--) RandR disabled
[ 34.721] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 34.736] (II) intel(0): Setting screen physical size to 361 x 203
[ 35.249] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 35.249] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 35.249] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 35.249] (II) LoadModule: "libinput"
[ 35.250] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 35.303] (II) Module libinput: vendor="X.Org Foundation"
[ 35.303] compiled for 1.19.1, module version = 0.24.0
[ 35.303] Module class: X.Org XInput Driver
[ 35.303] ABI class: X.Org XInput driver, version 24.1
[ 35.304] (II) Using input driver 'libinput' for 'Power Button'
[ 35.305] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 26 paused 0
[ 35.305] (**) Power Button: always reports core events
[ 35.306] (**) Option "Device" "/dev/input/event4"
[ 35.306] (**) Option "_source" "server/udev"
[ 35.307] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[ 35.307] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[ 35.307] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 35.307] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 35.308] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[ 35.308] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[ 35.310] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event5)
[ 35.310] (**) Asus Wireless Radio Control: Applying InputClass "evdev keyboard catchall"
[ 35.310] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[ 35.310] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[ 35.311] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 29 paused 0
[ 35.312] (**) Asus Wireless Radio Control: always reports core events
[ 35.312] (**) Option "Device" "/dev/input/event5"
[ 35.312] (**) Option "_source" "server/udev"
[ 35.313] (II) input device 'Asus Wireless Radio Control', /dev/input/event5 is tagged by udev as: Keyboard
[ 35.313] (II) input device 'Asus Wireless Radio Control', /dev/input/event5 is a keyboard
[ 35.313] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input5/event5"
[ 35.313] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[ 35.314] (II) input device 'Asus Wireless Radio Control', /dev/input/event5 is tagged by udev as: Keyboard
[ 35.314] (II) input device 'Asus Wireless Radio Control', /dev/input/event5 is a keyboard
[ 35.316] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 35.316] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 35.316] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 35.316] (II) Using input driver 'libinput' for 'Video Bus'
[ 35.318] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 30 paused 0
[ 35.318] (**) Video Bus: always reports core events
[ 35.318] (**) Option "Device" "/dev/input/event9"
[ 35.318] (**) Option "_source" "server/udev"
[ 35.319] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[ 35.319] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[ 35.319] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event9"
[ 35.319] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 35.321] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[ 35.321] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[ 35.322] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 35.322] (II) No input driver specified, ignoring this device.
[ 35.322] (II) This device may have been added with another device file.
[ 35.323] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 35.323] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 35.323] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 35.323] (II) Using input driver 'libinput' for 'Sleep Button'
[ 35.325] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 31 paused 0
[ 35.325] (**) Sleep Button: always reports core events
[ 35.325] (**) Option "Device" "/dev/input/event3"
[ 35.325] (**) Option "_source" "server/udev"
[ 35.326] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 35.326] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[ 35.326] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3"
[ 35.326] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 35.327] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 35.327] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[ 35.330] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event1)
[ 35.330] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 35.330] (**) USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 35.330] (II) Using input driver 'libinput' for 'USB Optical Mouse'
[ 35.387] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 32 paused 0
[ 35.387] (**) USB Optical Mouse: always reports core events
[ 35.387] (**) Option "Device" "/dev/input/event1"
[ 35.387] (**) Option "_source" "server/udev"
[ 35.389] (II) input device 'USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse
[ 35.389] (II) input device 'USB Optical Mouse', /dev/input/event1 is a pointer caps
[ 35.389] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:1BCF:0005.0001/input/input1/event1"
[ 35.389] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10)
[ 35.390] (**) Option "AccelerationScheme" "none"
[ 35.390] (**) USB Optical Mouse: (accel) selected scheme none/0
[ 35.390] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 35.390] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 35.391] (II) input device 'USB Optical Mouse', /dev/input/event1 is tagged by udev as: Mouse
[ 35.391] (II) input device 'USB Optical Mouse', /dev/input/event1 is a pointer caps
[ 35.392] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 35.392] (II) No input driver specified, ignoring this device.
[ 35.392] (II) This device may have been added with another device file.
[ 35.394] (II) config/udev: Adding input device USB Camera (/dev/input/event10)
[ 35.394] (**) USB Camera: Applying InputClass "evdev keyboard catchall"
[ 35.394] (**) USB Camera: Applying InputClass "libinput keyboard catchall"
[ 35.394] (II) Using input driver 'libinput' for 'USB Camera'
[ 35.396] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 33 paused 0
[ 35.396] (**) USB Camera: always reports core events
[ 35.396] (**) Option "Device" "/dev/input/event10"
[ 35.396] (**) Option "_source" "server/udev"
[ 35.397] (II) input device 'USB Camera', /dev/input/event10 is tagged by udev as: Keyboard
[ 35.397] (II) input device 'USB Camera', /dev/input/event10 is a keyboard
[ 35.397] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input11/event10"
[ 35.397] (II) XINPUT: Adding extended input device "USB Camera" (type: KEYBOARD, id 11)
[ 35.399] (II) input device 'USB Camera', /dev/input/event10 is tagged by udev as: Keyboard
[ 35.399] (II) input device 'USB Camera', /dev/input/event10 is a keyboard
[ 35.400] (II) config/udev: Adding input device Elan Touchpad (/dev/input/event8)
[ 35.400] (**) Elan Touchpad: Applying InputClass "evdev touchpad catchall"
[ 35.400] (**) Elan Touchpad: Applying InputClass "libinput touchpad catchall"
[ 35.400] (**) Elan Touchpad: Applying InputClass "touchpad catchall"
[ 35.400] (**) Elan Touchpad: Applying InputClass "Default clickpad buttons"
[ 35.400] (II) LoadModule: "synaptics"
[ 35.401] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 35.418] (II) Module synaptics: vendor="X.Org Foundation"
[ 35.418] compiled for 1.19.0, module version = 1.9.0
[ 35.418] Module class: X.Org XInput Driver
[ 35.418] ABI class: X.Org XInput driver, version 24.1
[ 35.418] (II) Using input driver 'synaptics' for 'Elan Touchpad'
[ 35.420] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 34 paused 0
[ 35.420] (**) Elan Touchpad: always reports core events
[ 35.420] (**) Option "Device" "/dev/input/event8"
[ 35.420] (II) synaptics: Elan Touchpad: found clickpad property
[ 35.421] (--) synaptics: Elan Touchpad: x-axis range 0 - 3097 (res 32)
[ 35.421] (--) synaptics: Elan Touchpad: y-axis range 0 - 2119 (res 33)
[ 35.421] (--) synaptics: Elan Touchpad: pressure range 0 - 255
[ 35.421] (--) synaptics: Elan Touchpad: finger width range 0 - 15
[ 35.421] (--) synaptics: Elan Touchpad: buttons: left double triple
[ 35.421] (--) synaptics: Elan Touchpad: Vendor 0x4f3 Product 0x5
[ 35.421] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 35.421] (--) synaptics: Elan Touchpad: touchpad found
[ 35.421] (**) Elan Touchpad: always reports core events
[ 35.421] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN1000:00/input/input8/event8"
[ 35.421] (II) XINPUT: Adding extended input device "Elan Touchpad" (type: TOUCHPAD, id 12)
[ 35.421] (**) synaptics: Elan Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 35.421] (**) synaptics: Elan Touchpad: (accel) MaxSpeed is now 1.75
[ 35.421] (**) synaptics: Elan Touchpad: (accel) AccelFactor is now 0.053
[ 35.422] (**) Elan Touchpad: (accel) keeping acceleration scheme 1
[ 35.422] (**) Elan Touchpad: (accel) acceleration profile 1
[ 35.422] (**) Elan Touchpad: (accel) acceleration factor: 2.000
[ 35.422] (**) Elan Touchpad: (accel) acceleration threshold: 4
[ 35.422] (--) synaptics: Elan Touchpad: touchpad found
[ 35.423] (II) config/udev: Adding input device Elan Touchpad (/dev/input/mouse1)
[ 35.423] (**) Elan Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 35.424] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 35.424] (II) No input driver specified, ignoring this device.
[ 35.424] (II) This device may have been added with another device file.
[ 35.425] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 35.425] (II) No input driver specified, ignoring this device.
[ 35.425] (II) This device may have been added with another device file.
[ 35.426] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event7)
[ 35.426] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 35.426] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 35.426] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[ 35.429] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 35 paused 0
[ 35.429] (**) Asus WMI hotkeys: always reports core events
[ 35.429] (**) Option "Device" "/dev/input/event7"
[ 35.429] (**) Option "_source" "server/udev"
[ 35.430] (II) input device 'Asus WMI hotkeys', /dev/input/event7 is tagged by udev as: Keyboard
[ 35.430] (II) input device 'Asus WMI hotkeys', /dev/input/event7 is a keyboard
[ 35.430] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input7/event7"
[ 35.430] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 13)
[ 35.431] (II) input device 'Asus WMI hotkeys', /dev/input/event7 is tagged by udev as: Keyboard
[ 35.431] (II) input device 'Asus WMI hotkeys', /dev/input/event7 is a keyboard
[ 35.432] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 35.432] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 35.432] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 35.432] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 35.434] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 36 paused 0
[ 35.434] (**) AT Translated Set 2 keyboard: always reports core events
[ 35.434] (**) Option "Device" "/dev/input/event0"
[ 35.434] (**) Option "_source" "server/udev"
[ 35.436] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 35.436] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 35.436] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 35.436] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 35.437] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 35.437] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 35.438] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 35.438] (II) No input driver specified, ignoring this device.
[ 35.438] (II) This device may have been added with another device file.
[ 36.652] (II) intel(0): EDID vendor "SDC", prod id 20049
[ 36.652] (II) intel(0): Printing DDC gathered Modelines:
[ 36.652] (II) intel(0): Modeline "1366x768"x0.0 77.20 1366 1430 1478 1616 768 770 775 792 -hsync -vsync (47.8 kHz eP)glxinfo/glxgears wont work dont know why...
$ glxinfo
name of display: :0
Error: couldn't find RGB GLX visual or fbconfig$ glxgears
Error: couldn't get an RGB, Double-buffered visualExtra Info
-Display-
Resolution : 1366x768 pixels
Vendor : The X.Org Foundation
Version : 1.19.1
-Monitors-
Monitor 0 : 1366x768 pixels
-Extensions-
BIG-REQUESTS
Composite
DAMAGE
DOUBLE-BUFFER
DPMS
DRI2
DRI3
Generic Event Extension
MIT-SCREEN-SAVER
MIT-SHM
Present
RANDR
RECORD
RENDER
SECURITY
SHAPE
SYNC
X-Resource
XC-MISC
XFIXES
XFree86-DGA
XFree86-VidModeExtension
XINERAMA
XInputExtension
XKEYBOARD
XTEST
XVideo
-OpenGL-
Vendor : Unknown
Renderer : Unknown
Version : Unknown
Direct Rendering : NoThats all.
Don't know what I should do to fix this..
Hopefuly you can help me.
I really appreciate any help
Tank you in advance. 
Last edited by 3SKRIMA (2017-02-18 15:56:10)
Offline
#2 2017-02-18 11:19:27
- Lone_Wolf
- Member
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 11,911
Re: [Solved]Fatal Error: OpenGL GLX extension not supported by display
[ 34.430] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 34.430] (**) | |-->Device "Intel Graphics"You have 1 or more *.conf files in /etc/X11/ and/or /etc/X11/xorg.conf.d/ folders, please post them.
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
(A works at time B) && (time C > time B ) ≠ (A works at time C)
Offline
#3 2017-02-18 11:28:05
- 3SKRIMA
- Member
- Registered: 2017-02-18
- Posts: 5
Re: [Solved]Fatal Error: OpenGL GLX extension not supported by display
this is all in this dir. sir i dont remember thouching any of this except the 20-intel.conf file.
ls /etc/X11/
xinit xorg.conf.d Xwrapper.conf Xwrapper.config$ ls /etc/X11/xorg.conf.d
20-intel.confcat /etc/X11/xorg.conf.d/20-intel.conf
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "TearFree" "true"
EndSectionOffline
#4 2017-02-18 12:19:41
- 3SKRIMA
- Member
- Registered: 2017-02-18
- Posts: 5
Re: [Solved]Fatal Error: OpenGL GLX extension not supported by display
Recently I updated my packages and after downloading the packages one of the instructions ask me to remove
/usr/lib/xorg/modules/extensions/libglx.soso I did after that my steam won't open I dont know if that help the problem showing up.
Offline
#5 2017-02-18 15:02:30
- R00KIE
- Forum Fellow
- From: Between a computer and a chair
- Registered: 2008-09-14
- Posts: 4,734
Re: [Solved]Fatal Error: OpenGL GLX extension not supported by display
Try to reinstall xorg-server. That said I have no recollection of pacman output instructing anyone to remove files tracked by pacman.
R00KIE
Tm90aGluZyB0byBzZWUgaGVyZSwgbW92ZSBhbG9uZy4K
Offline
#6 2017-02-18 15:52:47
- 3SKRIMA
- Member
- Registered: 2017-02-18
- Posts: 5
Re: [Solved]Fatal Error: OpenGL GLX extension not supported by display
Ok so I did the reinstall xorg-server it did solve the problem . . Edit: actually it did not instruct instead it said that it cant continue to install that certain "pkg" halting the upgrading. unless i remove that file. So anyway thank you very much. Sir R00KIE . Now im going back to my hobby thank you again I mark it SOLVED ! at least for me
Offline