You are not logged in.
Pages: 1
Ok, so I've updated my host yesterday and it started to behave in a weird way. First of all, after waking from a sleep the lock screen freezes for about 20sec. Here is what dmesg says:
[ 135.580588] ------------[ cut here ]------------
[ 135.580605] WARNING: CPU: 0 PID: 1752 at net/mac80211/driver-ops.h:17 drv_remove_interface+0x126/0x130 [mac80211]
[ 135.580489] dpm_run_callback+0x58/0x180
[ 135.580500] ? wiphy_namespace+0x20/0x20 [cfg80211]
[ 135.580505] device_resume+0xe1/0x1f0
[ 135.580510] async_resume+0x1d/0x50
[ 135.580515] async_run_entry_fn+0x37/0x150
[ 135.580520] process_one_work+0x1e5/0x470
[ 135.580525] worker_thread+0x48/0x4e0
[ 135.580529] kthread+0x101/0x140
[ 0.000000] microcode: microcode updated early to revision 0x9e, date = 2016-06-22
[ 0.000000] Linux version 4.10.4-1-ARCH (builduser@tobias) (gcc version 6.3.1 20170306 (GCC) ) #1 SMP PREEMPT Sat Mar 18 19:39:18 CET 2017
[ 0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img cryptdevice=/dev/mapper/sys-lvroot:root root=/dev/mapper/root rw modprobe.blacklist=pata_legacy
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005f68dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005f68e000-0x000000005f68efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000005f68f000-0x000000005f6d8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000005f6d9000-0x000000005f788fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005f789000-0x0000000060088fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000060089000-0x000000007558dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007558e000-0x0000000075f7dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000075f7e000-0x0000000077f7dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000077f7e000-0x0000000077ffdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000077ffe000-0x0000000077ffefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000077fff000-0x00000000780fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079000000-0x000000007e7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004807fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x5d5dd018-0x5d5f6657] usable ==> usable
[ 0.000000] e820: update [mem 0x5d5cc018-0x5d5dc057] usable ==> usable
[ 0.000000] e820: update [mem 0x5d5bd018-0x5d5cb057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x0000000000085fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000086000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000005d5bd017] usable
[ 0.000000] reserve setup_data: [mem 0x000000005d5bd018-0x000000005d5cb057] usable
[ 0.000000] reserve setup_data: [mem 0x000000005d5cb058-0x000000005d5cc017] usable
[ 0.000000] reserve setup_data: [mem 0x000000005d5cc018-0x000000005d5dc057] usable
[ 0.000000] reserve setup_data: [mem 0x000000005d5dc058-0x000000005d5dd017] usable
...skipping...
[ 135.580951] ret_from_fork+0x2c/0x40
[ 135.580954] ---[ end trace f29d96e6f768de60 ]---
Secondly, wireless card can't establish connection after waking. The only thing that helps is to restart the corresponding kernel module (ath10k_pci). Here is dmesg:
[ 141.979811] ath10k_pci 0000:08:00.0: could not suspend target (-11)
[ 141.983047] dpm_run_callback(): wiphy_resume+0x0/0x130 [cfg80211] returns -11
[ 141.983055] PM: Device phy0 failed to resume async: error -11
[ 141.983112] PM: resume of devices complete after 14540.197 msecs
[ 141.983524] usb 1-11:1.0: rebind failed: -517
[ 141.983529] usb 1-11:1.1: rebind failed: -517
[ 141.983955] PM: Finishing wakeup.
[ 141.983957] Restarting tasks ... done.
[ 142.003536] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000300.bin
[ 142.003541] Bluetooth: hci0: QCA: patch rome 0x300 build 0x3e8, firmware rome 0x300 build 0x111
[ 142.013330] bbswitch: disabling discrete graphics
[ 142.013348] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 142.059883] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000300.bin
[ 267.996787] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[ 272.691031] wlp8s0: authenticate with 40:e3:d6:7b:27:f0
[ 272.724641] wlp8s0: send auth to 40:e3:d6:7b:27:f0 (try 1/3)
[ 273.419889] wlp8s0: send auth to 40:e3:d6:7b:27:f0 (try 2/3)
[ 274.433227] wlp8s0: send auth to 40:e3:d6:7b:27:f0 (try 3/3)
[ 275.419909] wlp8s0: authentication with 40:e3:d6:7b:27:f0 timed out
[ 275.796552] wlp8s0: authenticate with 04:bd:88:b6:98:f0
[ 275.829445] wlp8s0: send auth to 04:bd:88:b6:98:f0 (try 1/3)
[ 276.433135] wlp8s0: send auth to 04:bd:88:b6:98:f0 (try 2/3)
[ 277.419877] wlp8s0: send auth to 04:bd:88:b6:98:f0 (try 3/3)
[ 277.819868] wlp8s0: aborting authentication with 04:bd:88:b6:98:f0 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 288.243388] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[ 288.336536] ath10k_pci 0000:08:00.0: no channel configured; ignoring frame(s)!
[ 288.339369] ath10k_pci 0000:08:00.0: no channel configured; ignoring frame(s)!
[ 288.369255] ath10k_pci 0000:08:00.0: no channel configured; ignoring frame(s)!
[ 292.928007] wlp8s0: authenticate with 40:e3:d6:7b:27:f0
[ 292.960962] wlp8s0: send auth to 40:e3:d6:7b:27:f0 (try 1/3)
[ 294.433257] wlp8s0: send auth to 40:e3:d6:7b:27:f0 (try 2/3)
[ 295.419906] wlp8s0: send auth to 40:e3:d6:7b:27:f0 (try 3/3)
[ 296.433235] wlp8s0: authentication with 40:e3:d6:7b:27:f0 timed out
[ 296.707199] wlp8s0: authenticate with 04:bd:88:b6:98:f0
[ 296.740009] wlp8s0: send auth to 04:bd:88:b6:98:f0 (try 1/3)
[ 297.419892] wlp8s0: send auth to 04:bd:88:b6:98:f0 (try 2/3)
[ 298.433243] wlp8s0: send auth to 04:bd:88:b6:98:f0 (try 3/3)
[ 299.419876] wlp8s0: authentication with 04:bd:88:b6:98:f0 timed out
[ 299.473508] ath10k_pci 0000:08:00.0: no channel configured; ignoring frame(s)!
[ 299.473713] ath10k_pci 0000:08:00.0: no channel configured; ignoring frame(s)!
[ 299.648572] wlp8s0: authenticate with 40:e3:d6:7b:27:e0
[ 299.685432] wlp8s0: send auth to 40:e3:d6:7b:27:e0 (try 1/3)
[ 300.433217] wlp8s0: send auth to 40:e3:d6:7b:27:e0 (try 2/3)
[ 301.419904] wlp8s0: send auth to 40:e3:d6:7b:27:e0 (try 3/3)
[ 302.433253] wlp8s0: authentication with 40:e3:d6:7b:27:e0 timed out
[ 302.506038] ath10k_pci 0000:08:00.0: no channel configured; ignoring frame(s)!
[ 302.507958] ath10k_pci 0000:08:00.0: no channel configured; ignoring frame(s)!
[ 302.603740] wlp8s0: authenticate with 04:bd:88:b6:98:e0
[ 302.640193] wlp8s0: send auth to 04:bd:88:b6:98:e0 (try 1/3)
[ 303.419805] wlp8s0: send auth to 04:bd:88:b6:98:e0 (try 2/3)
[ 304.306678] wlp8s0: aborting authentication with 04:bd:88:b6:98:e0 by local choice (Reason: 3=DEAUTH_L
What can I do to make everything working again?
P.S. also my elantech touchpad periodically loses sync (it persists for a long time) but it's another story (but if somebody would like to help I would be very grateful)
UPDATE: here is a full dmesg in case it would help to understand a context:
dmesg
Another update, this time journalctl that prints only warnings and errors:
Mar 21 00:49:03 dracula kernel: ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20160930/dswload-210)
Mar 21 00:49:03 dracula kernel: ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160930/psobject-227)
Mar 21 00:49:03 dracula kernel: ACPI Exception: AE_NOT_FOUND, (SSDT:CB-01 ) while loading table (20160930/tbxfload-228)
Mar 21 00:49:03 dracula kernel: ACPI Error: 1 table load failures, 9 successful (20160930/tbxfload-246)
Mar 21 00:49:03 dracula kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Mar 21 00:49:03 dracula kernel: ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
Mar 21 00:49:03 dracula kernel: PCCT header not found.
Mar 21 00:49:03 dracula kernel: pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
Mar 21 00:49:03 dracula kernel: platform MSFT0101:00: failed to claim resource 1
Mar 21 00:49:03 dracula kernel: acpi MSFT0101:00: platform device creation failed: -16
Mar 21 00:49:03 dracula kernel: mmc0: Unknown controller version (3). You may experience problems.
Mar 21 00:49:03 dracula kernel: vhba: loading out-of-tree module taints kernel.
Mar 21 00:49:03 dracula kernel: VBoxPciLinuxInit
Mar 21 00:49:03 dracula kernel: VBoxNetAdp: Successfully started.
Mar 21 00:49:03 dracula kernel: VBoxNetFlt: Successfully started.
Mar 21 00:49:03 dracula kernel: [Firmware Bug]: No valid trip found
Mar 21 00:49:03 dracula kernel: [Firmware Bug]: No valid trip found
Mar 21 00:49:04 dracula kernel: [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
Mar 21 00:49:05 dracula kernel: uvcvideo 1-6:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
Mar 21 00:49:05 dracula kernel: uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
Mar 21 00:49:05 dracula kernel: uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
Mar 21 00:49:05 dracula kernel: uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
Mar 21 00:49:05 dracula kernel: ath10k_pci 0000:08:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:08:00.0.bin failed with error -2
Mar 21 00:49:05 dracula kernel: ath10k_pci 0000:08:00.0: Direct firmware load for ath10k/cal-pci-0000:08:00.0.bin failed with error -2
Mar 21 00:49:13 dracula systemd-tmpfiles[589]: Cannot set file attribute for '/var/log/journal', value=0x00800000, mask=0x00800000: Operation not supported
Mar 21 00:49:13 dracula systemd-tmpfiles[589]: Cannot set file attribute for '/var/log/journal/4de8a7d0aad84611b2e1dfb0ff8f43e7', value=0x00800000, mask=0x00800000: Operation not supported
Mar 21 00:49:13 dracula systemd-tmpfiles[589]: Cannot set file attribute for '/var/log/journal/remote', value=0x00800000, mask=0x00800000: Operation not supported
Mar 21 00:49:13 dracula kernel: ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
Mar 21 00:49:13 dracula kernel: ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
Last edited by ddnomad (2017-03-20 23:02:06)
Offline
I have this same issue, and it started around the same time. Screen freezes for a while upon waking up, and then no wireless. Reloading `ath10k_pci` allows me to connect again as mentioned above.
Downgrading the kernel to 4.9.7 (the most recent I have in my cache from before the breaking update) fixes the issue.
Offline
Pages: 1