You are not logged in.
Pages: 1
Hey, I have a simple setup with a FAT32 boot partition and an EXT4 root partition.
When I am in chroot and try to install the bootloader with refind-install, it correctly finds /boot EFI partition and successfully finishes. However it did not work properly. When I reboot, it tries to boot something else than my installed system (I think the ISO) and is really buggy.
I have correct initramfs and vmlinuz in /boot so I am wondering what I did wrong.
The generated refind_linux.conf also seems to be wrong. It says "archisobasedir=arch archisolabel=ARCH_201704" in the top 2 entries and in the third entry it uses an uuid which belongs to the USB stick and not the hard drive of the installed system?
Can please someone help me?
I already retried multiple times ![]()
Edit: It also says unknown filesystem type vfat if I boot into one of the generated boot entries
Last edited by Magnus2552 (2017-04-05 13:02:12)
Offline
REFInd#Configuration edit /boot/refind_linux.conf to fix the generated entries or create an entry in esp/EFI/refind/refind.conf
Offline
It still says unknown filesystem type vfat when I boot into it.
Here is what the line in the conf looks like :
"arch" "rw root=PARTUUID=XXX"
Is this wrong?
(Of course I replaced XXX)
Last edited by Magnus2552 (2017-04-04 20:24:06)
Offline
Check the PARTUUID with the output from `blkid` to ensure it is not the PARTUUID of the ESP but the PARTUUID of the root filesystem.
Edit:
If the PARTUUID appears correct check the options refind is passing F2 in the menu then F2 again to make sure they match the options from /boot/refind_linux.conf
Then once the boot fails and you are in the rescue shell check dmesg at the start of output should be line that begins "Command line:" again check the parameters are as expected.
Last edited by loqs (2017-04-04 21:03:24)
Offline
rEFInd finds it's boot options at the time of boot. Make sure you don't have any cd's, dvd's or USB drives connected and then see what it finds. The other place it looks is on the ESP and boot options from other UEFI executables could be coming from there.
Simple and Open
Offline
Just a sanity check: Did you remember to set the boot flag on the fat32 partition?
Be aware of my Newbie Powers
Offline
Thank you all you for the help
I just retried from scratch and now it somehow works
(I already retried from scratch several times yesterday, so I don't know what exactly fixed it)
Offline
Pages: 1