You are not logged in.

Pages: 1

#1 2017-04-10 11:24:45

Lybs
Member
Registered: 2016-03-31
Posts: 4

Problems with Wacom Digitzer - X.org 5 minute delay till recognized

Hey guys,

after giving Linux another try on my X61T, i became stuck on the following error:

[     6.058] (II) config/udev: Adding input device Serial Wacom Tablet WACf004 (/dev/ttyS0)
[     6.058] (**) Serial Wacom Tablet WACf004: Applying InputClass "Wacom serial class"
[     6.058] (**) Serial Wacom Tablet WACf004: Applying InputClass "Wacom serial class identifiers"
[     6.058] (II) LoadModule: "wacom"
[     6.058] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[     6.060] (II) Module wacom: vendor="X.Org Foundation"
[     6.060]    compiled for 1.19.2, module version = 0.34.2
[     6.060]    Module class: X.Org XInput Driver
[     6.060]    ABI class: X.Org XInput driver, version 24.1
[     6.060] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire,
        Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8,
        Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8,
        Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660,
        CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L,
        CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12,
        Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800,
        PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931,
        DTU2231, DTU1631, Intuos2 4x5, Intuos2 6x8, Intuos2 9x12,
        Intuos2 12x12, Intuos2 12x18, Intuos2 6x8 , Volito, PenStation,
        Volito2 4x5, Volito2 2x3, PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6,
        Bamboo1 5x8, Intuos3 4x5, Intuos3 6x8, Intuos3 9x12, Intuos3 12x12,
        Intuos3 12x19, Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9,
        Intuos4 8x13, Intuos4 12x19, Intuos4 WL USB Endpoint,
        Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M,
        Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M,
        Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2,
        Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer),
        Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, TabletPC 0x90,
        TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A, CapPlus  0x9F,
        TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5, TabletPC 0xE6,
        TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF, TabletPC 0x100,
        TabletPC 0x101, TabletPC 0x10D, TabletPC 0x116, TabletPC 0x12C,
        TabletPC 0x4001, TabletPC 0x4004, TabletPC 0x5000, TabletPC 0x5002,
        usb:172f:0024, usb:172f:0025, usb:172f:0026, usb:172f:0027,
        usb:172f:0028, usb:172f:0030, usb:172f:0031, usb:172f:0032,
        usb:172f:0033, usb:172f:0034, usb:172f:0035, usb:172f:0036,
        usb:172f:0037, usb:172f:0038, usb:172f:0039, usb:172f:0051,
        usb:172f:0052, usb:172f:0053, usb:172f:0054, usb:172f:0055,
        usb:172f:0056, usb:172f:0057, usb:172f:0058, usb:172f:0500,
        usb:172f:0501, usb:172f:0502, usb:172f:0503, usb:1b96:0001,
        usb:17ef:6004
[     6.062] (II) Using input driver 'wacom' for 'Serial Wacom Tablet WACf004'
[     6.062] (**) Serial Wacom Tablet WACf004: always reports core events
[     6.062] (**) Option "Device" "/dev/ttyS0"
[     6.062] (**) Option "StopBits" "1"
[     6.062] (**) Option "DataBits" "8"
[     6.062] (**) Option "Parity" "None"
[     6.062] (**) Option "Vmin" "1"
[     6.062] (**) Option "Vtime" "10"
[     6.062] (**) Option "FlowControl" "Xoff"
[     6.063] (II) Serial Wacom Tablet WACf004: type not specified, assuming 'stylus'.
[     6.063] (II) Serial Wacom Tablet WACf004: other types will be automatically added.
[   256.093] (EE) Serial Wacom Tablet WACf004 stylus: wcmWriteWait error : Input/output error
[   256.093] (WW) Serial Wacom Tablet WACf004 stylus: Query failed with 19200 baud. Trying 38400.
[   256.093] (EE) Serial Wacom Tablet WACf004 stylus: wcmWriteWait error : Input/output error
[   256.093] (II) Serial Wacom Tablet WACf004 stylus: serial tablet id 0x90.
[   256.093] (EE) PreInit returned 8 for "Serial Wacom Tablet WACf004 stylus"
[   256.093] (II) UnloadModule: "wacom"
[   256.565] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse0)
[   256.565] (II) No input driver specified, ignoring this device.
[   256.565] (II) This device may have been added with another device file.
[   256.565] (II) config/udev: removing device TPPS/2 IBM TrackPoint
[   256.565] (II) event10 - (II) TPPS/2 IBM TrackPoint: (II) device removed
[   256.590] (II) UnloadModule: "libinput"
[   256.590] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event10)
[   256.590] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"
[   256.590] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[   256.591] (**) TPPS/2 IBM TrackPoint: always reports core events
[   256.591] (**) Option "Device" "/dev/input/event10"
[   256.591] (**) Option "_source" "server/udev"
[   256.591] (II) event10 - (II) TPPS/2 IBM TrackPoint: (II) is tagged by udev as: Mouse Pointingstick
[   256.591] (II) event10 - (II) TPPS/2 IBM TrackPoint: (II) device is a pointer
[   256.591] (II) event10 - (II) TPPS/2 IBM TrackPoint: (II) device removed
[   256.620] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event10"
[   256.620] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 10)
[   256.620] (**) Option "AccelerationScheme" "none"
[   256.620] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[   256.620] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[   256.620] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[   256.620] (II) event10 - (II) TPPS/2 IBM TrackPoint: (II) is tagged by udev as: Mouse Pointingstick
[   256.620] (II) event10 - (II) TPPS/2 IBM TrackPoint: (II) device is a pointer
[   256.621] (II) config/udev: Adding input device Wacom Serial Penabled Pen (/dev/input/mouse1)
[   256.621] (II) No input driver specified, ignoring this device.
[   256.621] (II) This device may have been added with another device file.
[   256.621] (II) config/udev: Adding input device Wacom Serial Penabled Pen (/dev/input/event11)
[   256.621] (**) Wacom Serial Penabled Pen: Applying InputClass "libinput tablet catchall"
[   256.621] (**) Wacom Serial Penabled Pen: Applying InputClass "Wacom USB tablet class"
[   256.621] (**) Wacom Serial Penabled Pen: Applying InputClass "Wacom tablet class"
[   256.621] (**) Wacom Serial Penabled Pen: Applying InputClass "Wacom PnP device class"
[   256.621] (II) Using input driver 'wacom' for 'Wacom Serial Penabled Pen'
[   256.621] (**) Wacom Serial Penabled Pen: always reports core events
[   256.621] (**) Option "Device" "/dev/input/event11"
[   256.622] (II) Wacom Serial Penabled Pen: type not specified, assuming 'stylus'.
[   256.622] (II) Wacom Serial Penabled Pen: other types will be automatically added.
[   256.622] (--) Wacom Serial Penabled Pen stylus: using pressure threshold of 873 for button 1
[   256.622] (--) Wacom Serial Penabled Pen stylus: maxX=24576 maxY=18432 maxZ=255 resX=100000 resY=100000  tilt=disabled
[   256.622] (II) Wacom Serial Penabled Pen stylus: hotplugging dependent devices.
[   256.622] (EE) Wacom Serial Penabled Pen stylus: Invalid type 'cursor' for this device.
[   256.622] (EE) Wacom Serial Penabled Pen stylus: Invalid type 'touch' for this device.
[   256.622] (EE) Wacom Serial Penabled Pen stylus: Invalid type 'pad' for this device.
[   256.622] (II) Wacom Serial Penabled Pen stylus: hotplugging completed.
[   256.640] (**) Option "config_info" "udev:/sys/devices/pnp0/00:05/tty/ttyS0/serio2/input/input12/event11"
[   256.640] (II) XINPUT: Adding extended input device "Wacom Serial Penabled Pen stylus" (type: STYLUS, id 12)
[   256.640] (**) Wacom Serial Penabled Pen stylus: (accel) keeping acceleration scheme 1
[   256.640] (**) Wacom Serial Penabled Pen stylus: (accel) acceleration profile 0
[   256.640] (**) Wacom Serial Penabled Pen stylus: (accel) acceleration factor: 2.000
[   256.640] (**) Wacom Serial Penabled Pen stylus: (accel) acceleration threshold: 4
[   256.640] (**) Wacom Serial Penabled Pen eraser: Applying InputClass "libinput tablet catchall"
[   256.640] (**) Wacom Serial Penabled Pen eraser: Applying InputClass "Wacom USB tablet class"
[   256.640] (**) Wacom Serial Penabled Pen eraser: Applying InputClass "Wacom tablet class"
[   256.640] (**) Wacom Serial Penabled Pen eraser: Applying InputClass "Wacom PnP device class"
[   256.640] (II) Using input driver 'wacom' for 'Wacom Serial Penabled Pen eraser'
[   256.640] (**) Wacom Serial Penabled Pen eraser: always reports core events
[   256.640] (**) Option "Device" "/dev/input/event11"
[   256.640] (**) Option "Type" "eraser"
[   256.640] (--) Wacom Serial Penabled Pen eraser: maxX=24576 maxY=18432 maxZ=255 resX=100000 resY=100000  tilt=disabled
[   256.650] (**) Option "config_info" "udev:/sys/devices/pnp0/00:05/tty/ttyS0/serio2/input/input12/event11"
[   256.650] (II) XINPUT: Adding extended input device "Wacom Serial Penabled Pen eraser" (type: ERASER, id 13)
[   256.650] (**) Wacom Serial Penabled Pen eraser: (accel) keeping acceleration scheme 1
[   256.650] (**) Wacom Serial Penabled Pen eraser: (accel) acceleration profile 0
[   256.650] (**) Wacom Serial Penabled Pen eraser: (accel) acceleration factor: 2.000
[   256.650] (**) Wacom Serial Penabled Pen eraser: (accel) acceleration threshold: 4

You can see, that there is exactly 250 seconds delay, till Xorg continue to load.

Any help would be greatly appreciated.. after this 250 secs delay, I can use the Digitizer without any problem.

Can I manually configure it? anyhow?

Thanks!

Offline

#2 2017-04-10 17:48:35

Lybs
Member
Registered: 2016-03-31
Posts: 4

Re: Problems with Wacom Digitzer - X.org 5 minute delay till recognized

Okay thanks, second question about Wacom in this forum & no reply...

So.. lets go to Windows again -_-

Offline

#3 2017-04-10 18:06:10

olegabrielz
Member
From: Norway
Registered: 2015-12-23
Posts: 255

Re: Problems with Wacom Digitzer - X.org 5 minute delay till recognized

Don't bump your own thread:
https://wiki.archlinux.org/index.php/Co … ct#Bumping
And don't be rude. People here are using their spare time to do support. If you can't find the time to wait a few hours for someone to pick up your thread, then I believe you won't get much help.

Be aware of my Newbie Powers

Offline

#4 2017-04-10 18:12:27

Slithery
Administrator
From: Norfolk, UK
Registered: 2013-12-01
Posts: 5,776

Re: Problems with Wacom Digitzer - X.org 5 minute delay till recognized

Does removing xf86-input-wacom help?

There may be support for your digitizer using libinput with no need for the xf86-input-wacom package.

No, it didn't "fix" anything. It just shifted the brokeness one space to the right. - jasonwryan
Closing -- for deletion; Banning -- for muppetry. - jasonwryan

aur - dotfiles

Offline

#5 2017-04-10 18:18:03

Lybs
Member
Registered: 2016-03-31
Posts: 4

Re: Problems with Wacom Digitzer - X.org 5 minute delay till recognized

Sorry olegabrielz, my first question is unanswered from a year ago, similar problem to this here... wink

slithery, If I remove it, I have no working Pen at all :-(

I honestly want to find out, whats up with this 250 seconds. After every full boot, I get exactly this delay until X finally starts up.

If you need more infos, please let me know!

edit: Im actually trying to add the digitizer manually via xorg.conf & disable AutoAddDevices..
Cheers

Last edited by Lybs (2017-04-10 18:21:44)

Offline

#6 2017-04-10 20:23:50

goumba
Member
From: New Jersey, USA
Registered: 2017-03-31
Posts: 21
Website

Re: Problems with Wacom Digitzer - X.org 5 minute delay till recognized

Take a look at https://bbs.archlinux.org/viewtopic.php?id=166028. Similar hardware, although the thread is a bit old, maybe will give you a start.

slithery wrote:

Does removing xf86-input-wacom help?

There may be support for your digitizer using libinput with no need for the xf86-input-wacom package.

This was how I was using mine originally, and never noticed that some functionality was missing (eraser, second button) without xf86-input-wacom.

If you don't have or need the additional buttons, then ensure the following are installed, and the stylus will work:

libinput
libwacom
xf86-input-libinput

Last edited by goumba (2017-04-10 21:02:07)

FSF Associate Member #12876
"Yeah, well, you know, that's just, like, your opinion, man." - The Dude

Offline

Pages: 1

Board footer

Powered by FluxBB