SDDM KDE Plasma doesn't init (nvidia, mesa)

karlospv94 · 2017-04-16 12:39:08

When I boot my computer I only see a black screen and I must change to another tty to do work. You can see here packages which makes graphics not working:

Environment not working:

lib32-libglvnd 0.2.999+g4ba53457-2
lib32-mesa 17.0.3-1
libglvnd 0.2.999+g4ba53457-2
mesa 17.0.3-1
nvidia 378.13-5
nvidia-utils 378.13-6
sddm 0.14.0-2
sddm-kcm 5.9.4-1

Environment working:

lib32-libglvnd 0.2.999+g4ba53457-2
lib32-mesa 17.0.2-1
libglvnd 0.2.999+g4ba53457-2
mesa 17.0.2-2
nvidia 378.13-3
nvidia-utils 378.13-3
sddm 0.14.0-2
sddm-kcm 5.9.4-1

I can only see the welcome screen of KDE if I use the version of the packages listed above (packages changed are nvidia and mesa).

Here is my Xorg.0.log:

[   242.869] _XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
[   242.870] _XSERVTransMakeAllCOTSServerListeners: server already running
[   242.871] (EE) 
Fatal server error:
[   242.873] (EE) Cannot establish any listening sockets - Make sure an X server isn't already running(EE) 
[   242.874] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   242.878] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   242.880] (EE) 
[   242.881] (EE) Server terminated with error (1). Closing log file.

And my journalctl:

-- Logs begin at Sat 2016-10-29 12:35:44 CEST, end at Sun 2017-04-16 14:08:26 CEST. --
abr 16 14:07:29 turing systemd-journald[192]: Time spent on flushing to /var is 608us for 0 entries.
abr 16 14:07:29 turing kernel: Linux version 4.10.9-1-ARCH (builduser@tobias) (gcc version 6.3.1 20170306 (GCC) ) #1 SMP PREEMPT Sat Apr 8 12:39:59 CEST 2017
abr 16 14:07:29 turing kernel: Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=43ef0b61-66cc-4d35-ab56-694452acbce8 rw quiet
abr 16 14:07:29 turing kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
abr 16 14:07:29 turing kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
abr 16 14:07:29 turing kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
abr 16 14:07:29 turing kernel: x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
abr 16 14:07:29 turing kernel: x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
abr 16 14:07:29 turing kernel: x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
abr 16 14:07:29 turing kernel: x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
abr 16 14:07:29 turing kernel: x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
abr 16 14:07:29 turing kernel: x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
abr 16 14:07:29 turing kernel: e820: BIOS-provided physical RAM map:
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x0000000000100000-0x000000002f43dfff] usable
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x000000002f43e000-0x000000002f43efff] ACPI NVS
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x000000002f43f000-0x000000002f488fff] reserved
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x000000002f489000-0x0000000035136fff] usable
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x0000000035137000-0x0000000035e5bfff] reserved
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x0000000035e5c000-0x00000000361f4fff] usable
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x00000000361f5000-0x00000000370a1fff] ACPI NVS
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x00000000370a2000-0x0000000037f01fff] reserved
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x0000000037f02000-0x0000000037f7efff] type 20
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x0000000037f7f000-0x0000000037ffefff] usable
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x0000000038000000-0x00000000380fffff] reserved
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
abr 16 14:07:29 turing kernel: BIOS-e820: [mem 0x0000000100000000-0x00000004c1ffffff] usable
abr 16 14:07:29 turing kernel: NX (Execute Disable) protection: active
abr 16 14:07:29 turing kernel: efi: EFI v2.40 by American Megatrends
abr 16 14:07:29 turing kernel: efi:  ESRT=0x37e41e18  ACPI=0x362fd000  ACPI 2.0=0x362fd000  SMBIOS=0xf05e0  SMBIOS 3.0=0xf0600  MPS=0xfca60 
abr 16 14:07:29 turing kernel: SMBIOS 3.0.0 present.
abr 16 14:07:29 turing kernel: DMI: ASUSTeK COMPUTER INC. N501VW/N501VW, BIOS N501VW.300 05/09/2016
abr 16 14:07:29 turing kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
abr 16 14:07:29 turing kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
abr 16 14:07:29 turing kernel: e820: last_pfn = 0x4c2000 max_arch_pfn = 0x400000000
abr 16 14:07:29 turing kernel: MTRR default type: write-back
abr 16 14:07:29 turing kernel: MTRR fixed ranges enabled:
abr 16 14:07:29 turing kernel:   00000-9FFFF write-back
abr 16 14:07:29 turing kernel:   A0000-BFFFF uncachable
abr 16 14:07:29 turing kernel:   C0000-FFFFF write-protect
abr 16 14:07:29 turing kernel: MTRR variable ranges enabled:
abr 16 14:07:29 turing kernel:   0 base 0080000000 mask 7F80000000 uncachable
abr 16 14:07:29 turing kernel:   1 base 0040000000 mask 7FC0000000 uncachable
abr 16 14:07:29 turing kernel:   2 base 003C000000 mask 7FFC000000 uncachable
abr 16 14:07:29 turing kernel:   3 base 003A000000 mask 7FFE000000 uncachable
abr 16 14:07:29 turing kernel:   4 base 0039000000 mask 7FFF000000 uncachable
abr 16 14:07:29 turing kernel:   5 base 0038800000 mask 7FFF800000 uncachable
abr 16 14:07:29 turing kernel:   6 disabled
abr 16 14:07:29 turing kernel:   7 disabled
abr 16 14:07:29 turing kernel:   8 disabled
abr 16 14:07:29 turing kernel:   9 disabled
abr 16 14:07:29 turing kernel: x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
abr 16 14:07:29 turing kernel: e820: last_pfn = 0x37fff max_arch_pfn = 0x400000000
abr 16 14:07:29 turing kernel: found SMP MP-table at [mem 0x000fccf0-0x000fccff] mapped at [ffff8800000fccf0]
abr 16 14:07:29 turing kernel: esrt: Reserving ESRT space from 0x0000000037e41e18 to 0x0000000037e41e50.
abr 16 14:07:29 turing kernel: Scanning 1 areas for low memory corruption
abr 16 14:07:29 turing kernel: Base memory trampoline at [ffff880000096000] 96000 size 24576
abr 16 14:07:29 turing kernel: Using GB pages for direct mapping
abr 16 14:07:29 turing kernel: BRK [0x02d5f000, 0x02d5ffff] PGTABLE
abr 16 14:07:29 turing kernel: BRK [0x02d60000, 0x02d60fff] PGTABLE
abr 16 14:07:29 turing kernel: BRK [0x02d61000, 0x02d61fff] PGTABLE
abr 16 14:07:29 turing kernel: BRK [0x02d62000, 0x02d62fff] PGTABLE
abr 16 14:07:29 turing kernel: BRK [0x02d63000, 0x02d63fff] PGTABLE
abr 16 14:07:29 turing kernel: BRK [0x02d64000, 0x02d64fff] PGTABLE
abr 16 14:07:29 turing kernel: RAMDISK: [mem 0x32c1b000-0x331a6fff]
abr 16 14:07:30 turing kernel: ACPI: Early table checksum verification disabled
abr 16 14:07:30 turing kernel: ACPI: RSDP 0x00000000362FD000 000024 (v02 _ASUS_)
abr 16 14:07:30 turing kernel: ACPI: XSDT 0x00000000362FD0A8 0000D4 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
abr 16 14:07:30 turing kernel: ACPI: FACP 0x0000000036325AA8 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
abr 16 14:07:30 turing kernel: ACPI: DSDT 0x00000000362FD210 028893 (v02 _ASUS_ Notebook 01072009 INTL 20120913)
abr 16 14:07:30 turing kernel: ACPI: FACS 0x00000000370A0F80 000040
abr 16 14:07:30 turing kernel: ACPI: APIC 0x0000000036325BB8 0000BC (v03 _ASUS_ Notebook 01072009 AMI  00010013)
abr 16 14:07:30 turing kernel: ACPI: FPDT 0x0000000036325C78 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
abr 16 14:07:30 turing kernel: ACPI: FIDT 0x0000000036325CC0 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
abr 16 14:07:30 turing kernel: ACPI: MCFG 0x0000000036325D60 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
abr 16 14:07:30 turing kernel: ACPI: HPET 0x0000000036325DA0 000038 (v01 _ASUS_ Notebook 01072009 AMI. 0005000B)
abr 16 14:07:30 turing kernel: ACPI: SSDT 0x0000000036325DD8 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
abr 16 14:07:30 turing kernel: ACPI: ECDT 0x00000000363260F0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
abr 16 14:07:30 turing kernel: ACPI: LPIT 0x00000000363261B8 000094 (v01 INTEL  SKL      00000000 MSFT 0000005F)
abr 16 14:07:30 turing kernel: ACPI: SSDT 0x0000000036326250 000248 (v02 INTEL  sensrhub 00000000 INTL 20120913)
abr 16 14:07:30 turing kernel: ACPI: DBGP 0x0000000036326498 000034 (v01 INTEL           00000000 MSFT 0000005F)
abr 16 14:07:30 turing kernel: ACPI: DBG2 0x00000000363264D0 000054 (v00 INTEL           00000000 MSFT 0000005F)
abr 16 14:07:30 turing kernel: ACPI: SSDT 0x0000000036326528 003F2B (v02 DptfTa DptfTabl 00001000 INTL 20120913)
abr 16 14:07:30 turing kernel: ACPI: SSDT 0x000000003632A458 0066A5 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
abr 16 14:07:30 turing kernel: ACPI: UEFI 0x0000000036330B00 000042 (v01                 00000000      00000000)
abr 16 14:07:30 turing kernel: ACPI: SSDT 0x0000000036330B48 000E73 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
abr 16 14:07:30 turing kernel: ACPI: BGRT 0x00000000363319C0 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
abr 16 14:07:30 turing kernel: ACPI: SSDT 0x00000000363319F8 0000A5 (v02 SgRef  SgPeg    00001000 INTL 20120913)
abr 16 14:07:30 turing kernel: ACPI: DMAR 0x0000000036331AA0 0000F0 (v01 INTEL  SKL      00000001 INTL 00000001)
abr 16 14:07:30 turing kernel: ACPI: TPM2 0x0000000036331B90 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
abr 16 14:07:30 turing kernel: ACPI: SSDT 0x0000000036331BC8 0019FA (v01 OptRef OptTabl  00001000 INTL 20120913)
abr 16 14:07:30 turing kernel: ACPI: MSDM 0x0000000035BE5F18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
abr 16 14:07:30 turing kernel: ACPI: Local APIC address 0xfee00000
abr 16 14:07:30 turing kernel: No NUMA configuration found
abr 16 14:07:30 turing kernel: Faking a node at [mem 0x0000000000000000-0x00000004c1ffffff]
abr 16 14:07:30 turing kernel: NODE_DATA(0) allocated [mem 0x4c1ff8000-0x4c1ffcfff]
abr 16 14:07:30 turing kernel: Zone ranges:
abr 16 14:07:30 turing kernel:   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
abr 16 14:07:30 turing kernel:   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
abr 16 14:07:30 turing kernel:   Normal   [mem 0x0000000100000000-0x00000004c1ffffff]
abr 16 14:07:30 turing kernel:   Device   empty
abr 16 14:07:30 turing kernel: Movable zone start for each node
abr 16 14:07:30 turing kernel: Early memory node ranges
abr 16 14:07:30 turing kernel:   node   0: [mem 0x0000000000001000-0x0000000000057fff]
abr 16 14:07:30 turing kernel:   node   0: [mem 0x0000000000059000-0x000000000009efff]
abr 16 14:07:30 turing kernel:   node   0: [mem 0x0000000000100000-0x000000002f43dfff]
abr 16 14:07:30 turing kernel:   node   0: [mem 0x000000002f489000-0x0000000035136fff]
abr 16 14:07:30 turing kernel:   node   0: [mem 0x0000000035e5c000-0x00000000361f4fff]
abr 16 14:07:30 turing kernel:   node   0: [mem 0x0000000037f7f000-0x0000000037ffefff]
abr 16 14:07:30 turing kernel:   node   0: [mem 0x0000000100000000-0x00000004c1ffffff]
abr 16 14:07:30 turing kernel: Initmem setup node 0 [mem 0x0000000000001000-0x00000004c1ffffff]
abr 16 14:07:30 turing kernel: On node 0 totalpages: 4158626
abr 16 14:07:30 turing kernel:   DMA zone: 64 pages used for memmap
abr 16 14:07:30 turing kernel:   DMA zone: 26 pages reserved
abr 16 14:07:30 turing kernel:   DMA zone: 3997 pages, LIFO batch:0
abr 16 14:07:30 turing kernel:   DMA32 zone: 3349 pages used for memmap
abr 16 14:07:30 turing kernel:   DMA32 zone: 214277 pages, LIFO batch:31
abr 16 14:07:30 turing kernel:   Normal zone: 61568 pages used for memmap
abr 16 14:07:30 turing kernel:   Normal zone: 3940352 pages, LIFO batch:31
abr 16 14:07:30 turing kernel: Reserving Intel graphics memory at 0x0000000039000000-0x000000003cffffff
abr 16 14:07:30 turing kernel: ACPI: PM-Timer IO Port: 0x1808
abr 16 14:07:30 turing kernel: ACPI: Local APIC address 0xfee00000
abr 16 14:07:30 turing kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
abr 16 14:07:30 turing kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
abr 16 14:07:30 turing kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
abr 16 14:07:30 turing kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
abr 16 14:07:30 turing kernel: ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
abr 16 14:07:30 turing kernel: ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
abr 16 14:07:30 turing kernel: ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
abr 16 14:07:30 turing kernel: ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
abr 16 14:07:30 turing kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
abr 16 14:07:30 turing kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
abr 16 14:07:30 turing kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
abr 16 14:07:30 turing kernel: ACPI: IRQ0 used by override.
abr 16 14:07:30 turing kernel: ACPI: IRQ9 used by override.
abr 16 14:07:30 turing kernel: Using ACPI (MADT) for SMP configuration information
abr 16 14:07:30 turing kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
abr 16 14:07:30 turing kernel: smpboot: Allowing 8 CPUs, 0 hotplug CPUs
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0x2f43e000-0x2f43efff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0x2f43f000-0x2f488fff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0x35137000-0x35e5bfff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0x361f5000-0x370a1fff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0x370a2000-0x37f01fff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0x37f02000-0x37f7efff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0x37fff000-0x37ffffff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0x38000000-0x380fffff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0x38100000-0x38ffffff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0x39000000-0x3cffffff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0x3d000000-0xdfffffff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
abr 16 14:07:30 turing kernel: PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
abr 16 14:07:30 turing kernel: e820: [mem 0x3d000000-0xdfffffff] available for PCI devices
abr 16 14:07:30 turing kernel: Booting paravirtualized kernel on bare hardware
abr 16 14:07:30 turing kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
abr 16 14:07:30 turing kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
abr 16 14:07:30 turing kernel: percpu: Embedded 35 pages/cpu @ffff8804c1c00000 s103640 r8192 d31528 u262144
abr 16 14:07:30 turing kernel: pcpu-alloc: s103640 r8192 d31528 u262144 alloc=1*2097152
abr 16 14:07:30 turing kernel: pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
abr 16 14:07:30 turing kernel: Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4093619
abr 16 14:07:30 turing kernel: Policy zone: Normal
abr 16 14:07:30 turing kernel: Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=43ef0b61-66cc-4d35-ab56-694452acbce8 rw quiet
abr 16 14:07:30 turing kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
abr 16 14:07:30 turing kernel: Calgary: detecting Calgary via BIOS EBDA area
abr 16 14:07:30 turing kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
abr 16 14:07:30 turing kernel: Memory: 16238280K/16634504K available (6367K kernel code, 1090K rwdata, 1984K rodata, 1292K init, 1032K bss, 396224K reserved, 0K cma-reserved)
abr 16 14:07:30 turing kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
abr 16 14:07:30 turing kernel: Preemptible hierarchical RCU implementation.
abr 16 14:07:30 turing kernel:         Build-time adjustment of leaf fanout to 64.
abr 16 14:07:30 turing kernel:         RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
abr 16 14:07:30 turing kernel: RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
abr 16 14:07:30 turing kernel: NR_IRQS:8448 nr_irqs:2048 16
abr 16 14:07:30 turing kernel: spurious 8259A interrupt: IRQ7.
abr 16 14:07:30 turing kernel: Console: colour dummy device 80x25
abr 16 14:07:30 turing kernel: console [tty0] enabled
abr 16 14:07:30 turing kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
abr 16 14:07:30 turing kernel: hpet clockevent registered
abr 16 14:07:30 turing kernel: tsc: Detected 2600.000 MHz processor
abr 16 14:07:30 turing kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5186.00 BogoMIPS (lpj=8640000)
abr 16 14:07:30 turing kernel: pid_max: default: 32768 minimum: 301
abr 16 14:07:30 turing kernel: ACPI: Core revision 20160930
abr 16 14:07:30 turing kernel: ACPI: 8 ACPI AML tables successfully acquired and loaded
abr 16 14:07:30 turing kernel: Security Framework initialized
abr 16 14:07:30 turing kernel: Yama: becoming mindful.
abr 16 14:07:30 turing kernel: Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
abr 16 14:07:30 turing kernel: Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
abr 16 14:07:30 turing kernel: Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
abr 16 14:07:30 turing kernel: Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
abr 16 14:07:30 turing kernel: CPU: Physical Processor ID: 0
abr 16 14:07:30 turing kernel: CPU: Processor Core ID: 0
abr 16 14:07:30 turing kernel: ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
abr 16 14:07:30 turing kernel: ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
abr 16 14:07:30 turing kernel: mce: CPU supports 10 MCE banks
abr 16 14:07:30 turing kernel: CPU0: Thermal monitoring enabled (TM1)
abr 16 14:07:30 turing kernel: process: using mwait in idle threads
abr 16 14:07:30 turing kernel: Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
abr 16 14:07:30 turing kernel: Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
abr 16 14:07:30 turing kernel: Freeing SMP alternatives memory: 24K
abr 16 14:07:30 turing kernel: ftrace: allocating 25114 entries in 99 pages
abr 16 14:07:30 turing kernel: smpboot: Max logical packages: 2
abr 16 14:07:30 turing kernel: DMAR: Host address width 39
abr 16 14:07:30 turing kernel: DMAR: DRHD base: 0x000000fed90000 flags: 0x0
abr 16 14:07:30 turing kernel: DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
abr 16 14:07:30 turing kernel: DMAR: DRHD base: 0x000000fed91000 flags: 0x1
abr 16 14:07:30 turing kernel: DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
abr 16 14:07:30 turing kernel: DMAR: RMRR base: 0x00000035bc5000 end: 0x00000035be4fff
abr 16 14:07:30 turing kernel: DMAR: RMRR base: 0x00000038800000 end: 0x0000003cffffff
abr 16 14:07:30 turing kernel: DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
abr 16 14:07:30 turing kernel: DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
abr 16 14:07:30 turing kernel: DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
abr 16 14:07:30 turing kernel: DMAR-IR: HPET id 0 under DRHD base 0xfed91000
abr 16 14:07:30 turing kernel: DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
abr 16 14:07:30 turing kernel: DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
abr 16 14:07:30 turing kernel: DMAR-IR: Enabled IRQ remapping in xapic mode
abr 16 14:07:30 turing kernel: x2apic: IRQ remapping doesn't support X2APIC mode
abr 16 14:07:30 turing kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
abr 16 14:07:30 turing kernel: TSC deadline timer enabled
abr 16 14:07:30 turing kernel: smpboot: CPU0: Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz (family: 0x6, model: 0x5e, stepping: 0x3)
abr 16 14:07:30 turing kernel: Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
abr 16 14:07:30 turing kernel: ... version:                4
abr 16 14:07:30 turing kernel: ... bit width:              48
abr 16 14:07:30 turing kernel: ... generic registers:      4
abr 16 14:07:30 turing kernel: ... value mask:             0000ffffffffffff
abr 16 14:07:30 turing kernel: ... max period:             00007fffffffffff
abr 16 14:07:30 turing kernel: ... fixed-purpose events:   3
abr 16 14:07:30 turing kernel: ... event mask:             000000070000000f
abr 16 14:07:30 turing kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
abr 16 14:07:30 turing kernel: smp: Bringing up secondary CPUs ...
abr 16 14:07:30 turing kernel: x86: Booting SMP configuration:
abr 16 14:07:30 turing kernel: .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
abr 16 14:07:30 turing kernel: smp: Brought up 1 node, 8 CPUs
abr 16 14:07:30 turing kernel: smpboot: Total of 8 processors activated (41497.35 BogoMIPS)
abr 16 14:07:30 turing kernel: devtmpfs: initialized
abr 16 14:07:30 turing kernel: x86/mm: Memory block size: 128MB
abr 16 14:07:30 turing kernel: PM: Registering ACPI NVS region [mem 0x2f43e000-0x2f43efff] (4096 bytes)
abr 16 14:07:30 turing kernel: PM: Registering ACPI NVS region [mem 0x361f5000-0x370a1fff] (15388672 bytes)
abr 16 14:07:30 turing kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
abr 16 14:07:30 turing kernel: futex hash table entries: 2048 (order: 5, 131072 bytes)
abr 16 14:07:30 turing kernel: pinctrl core: initialized pinctrl subsystem
abr 16 14:07:30 turing kernel: RTC time: 12:07:28, date: 04/16/17
abr 16 14:07:30 turing kernel: NET: Registered protocol family 16
abr 16 14:07:30 turing kernel: cpuidle: using governor ladder
abr 16 14:07:30 turing kernel: cpuidle: using governor menu
abr 16 14:07:30 turing kernel: PCCT header not found.
abr 16 14:07:30 turing kernel: ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
abr 16 14:07:30 turing kernel: ACPI: bus type PCI registered
abr 16 14:07:30 turing kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
abr 16 14:07:30 turing kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
abr 16 14:07:30 turing kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
abr 16 14:07:30 turing kernel: PCI: Using configuration type 1 for base access
abr 16 14:07:30 turing kernel: HugeTLB registered 1 GB page size, pre-allocated 0 pages
abr 16 14:07:30 turing kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
abr 16 14:07:30 turing kernel: ACPI: Added _OSI(Module Device)
abr 16 14:07:30 turing kernel: ACPI: Added _OSI(Processor Device)
abr 16 14:07:30 turing kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
abr 16 14:07:30 turing kernel: ACPI: Added _OSI(Processor Aggregator Device)
abr 16 14:07:30 turing kernel: ACPI : EC: EC started
abr 16 14:07:30 turing kernel: ACPI: \: Used as first EC
abr 16 14:07:30 turing kernel: ACPI: \: GPE=0x23, EC_CMD/EC_SC=0x66, EC_DATA=0x62
abr 16 14:07:30 turing kernel: ACPI: \: Used as boot ECDT EC to handle transactions
abr 16 14:07:30 turing kernel: ACPI: Executed 25 blocks of module-level executable AML code
abr 16 14:07:30 turing kernel: ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
abr 16 14:07:30 turing kernel: ACPI: Dynamic OEM Table Load:
abr 16 14:07:30 turing kernel: ACPI: SSDT 0xFFFF8804AF3DD800 0005DC (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
abr 16 14:07:30 turing kernel: ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
abr 16 14:07:30 turing kernel: ACPI: Dynamic OEM Table Load:
abr 16 14:07:30 turing kernel: ACPI: SSDT 0xFFFF8804AEFBD400 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
abr 16 14:07:30 turing kernel: ACPI: Dynamic OEM Table Load:
abr 16 14:07:30 turing kernel: ACPI: SSDT 0xFFFF8804AF3CD240 00008E (v02 PmRef  Cpu0Hwp  00003000 INTL 20120913)
abr 16 14:07:30 turing kernel: ACPI: Dynamic OEM Table Load:
abr 16 14:07:30 turing kernel: ACPI: SSDT 0xFFFF8804AEF89C00 000130 (v02 PmRef  HwpLvt   00003000 INTL 20120913)
abr 16 14:07:30 turing kernel: ACPI: Dynamic OEM Table Load:
abr 16 14:07:30 turing kernel: ACPI: SSDT 0xFFFF8804AF3DE800 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
abr 16 14:07:30 turing kernel: ACPI: Dynamic OEM Table Load:
abr 16 14:07:30 turing kernel: ACPI: SSDT 0xFFFF8804AEF8AC00 000119 (v02 PmRef  ApHwp    00003000 INTL 20120913)
abr 16 14:07:30 turing kernel: ACPI: Dynamic OEM Table Load:
abr 16 14:07:30 turing kernel: ACPI: SSDT 0xFFFF8804AEF88600 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
abr 16 14:07:30 turing kernel: ACPI : EC: EC stopped
abr 16 14:07:30 turing kernel: ACPI : EC: EC started
abr 16 14:07:30 turing kernel: ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
abr 16 14:07:30 turing kernel: ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x23, EC_CMD/EC_SC=0x66, EC_DATA=0x62
abr 16 14:07:30 turing kernel: ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
abr 16 14:07:30 turing kernel: ACPI: Interpreter enabled
abr 16 14:07:30 turing kernel: ACPI: (supports S0 S3 S4 S5)
abr 16 14:07:30 turing kernel: ACPI: Using IOAPIC for interrupt routing
abr 16 14:07:30 turing kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
abr 16 14:07:30 turing kernel: ACPI: Power Resource [PG00] (on)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [PG01] (on)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [PG02] (on)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [WRST] (off)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [WRST] (off)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [WRST] (off)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [WRST] (off)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [WRST] (off)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [WRST] (off)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [WRST] (off)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [WRST] (off)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [WRST] (off)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [WRST] (off)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [WRST] (off)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [WRST] (off)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [WRST] (off)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [WRST] (off)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [WRST] (off)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [WRST] (off)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [WRST] (off)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [WRST] (off)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [WRST] (off)
abr 16 14:07:30 turing kernel: ACPI: Power Resource [WRST] (off)
abr 16 14:07:30 turing kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
abr 16 14:07:30 turing kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
abr 16 14:07:30 turing kernel: acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
abr 16 14:07:30 turing kernel: PCI host bridge to bus 0000:00
abr 16 14:07:30 turing kernel: pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
abr 16 14:07:30 turing kernel: pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
abr 16 14:07:30 turing kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
abr 16 14:07:30 turing kernel: pci_bus 0000:00: root bus resource [mem 0x3d000000-0xdfffffff window]
abr 16 14:07:30 turing kernel: pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
abr 16 14:07:30 turing kernel: pci_bus 0000:00: root bus resource [bus 00-fe]
abr 16 14:07:30 turing kernel: pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
abr 16 14:07:30 turing kernel: pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
abr 16 14:07:30 turing kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
abr 16 14:07:30 turing kernel: pci 0000:00:01.0: System wakeup disabled by ACPI
abr 16 14:07:30 turing kernel: pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
abr 16 14:07:30 turing kernel: pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
abr 16 14:07:30 turing kernel: pci 0000:00:02.0: reg 0x18: [mem 0x70000000-0x7fffffff 64bit pref]
abr 16 14:07:30 turing kernel: pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
abr 16 14:07:30 turing kernel: pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
abr 16 14:07:30 turing kernel: pci 0000:00:04.0: reg 0x10: [mem 0xdd320000-0xdd327fff 64bit]
abr 16 14:07:30 turing kernel: pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
abr 16 14:07:30 turing kernel: pci 0000:00:14.0: reg 0x10: [mem 0xdd310000-0xdd31ffff 64bit]
abr 16 14:07:30 turing kernel: pci 0000:00:14.0: PME# supported from D3hot D3cold
abr 16 14:07:30 turing kernel: pci 0000:00:14.0: System wakeup disabled by ACPI
abr 16 14:07:30 turing kernel: pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
abr 16 14:07:30 turing kernel: pci 0000:00:14.2: reg 0x10: [mem 0xdd338000-0xdd338fff 64bit]
abr 16 14:07:30 turing kernel: pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
abr 16 14:07:30 turing kernel: pci 0000:00:15.0: reg 0x10: [mem 0xdd337000-0xdd337fff 64bit]
abr 16 14:07:30 turing kernel: pci 0000:00:15.1: [8086:a161] type 00 class 0x118000
abr 16 14:07:30 turing kernel: pci 0000:00:15.1: reg 0x10: [mem 0xdd336000-0xdd336fff 64bit]
abr 16 14:07:30 turing kernel: pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
abr 16 14:07:30 turing kernel: pci 0000:00:16.0: reg 0x10: [mem 0xdd335000-0xdd335fff 64bit]
abr 16 14:07:30 turing kernel: pci 0000:00:16.0: PME# supported from D3hot
abr 16 14:07:30 turing kernel: pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
abr 16 14:07:30 turing kernel: pci 0000:00:17.0: reg 0x10: [mem 0xdd330000-0xdd331fff]
abr 16 14:07:30 turing kernel: pci 0000:00:17.0: reg 0x14: [mem 0xdd334000-0xdd3340ff]
abr 16 14:07:30 turing kernel: pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
abr 16 14:07:30 turing kernel: pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
abr 16 14:07:30 turing kernel: pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
abr 16 14:07:30 turing kernel: pci 0000:00:17.0: reg 0x24: [mem 0xdd333000-0xdd3337ff]
abr 16 14:07:30 turing kernel: pci 0000:00:17.0: PME# supported from D3hot
abr 16 14:07:30 turing kernel: pci 0000:00:1c.0: [8086:a111] type 01 class 0x060400
abr 16 14:07:30 turing kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
abr 16 14:07:30 turing kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
abr 16 14:07:30 turing kernel: pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
abr 16 14:07:30 turing kernel: pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
abr 16 14:07:30 turing kernel: pci 0000:00:1c.2: System wakeup disabled by ACPI
abr 16 14:07:30 turing kernel: pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400
abr 16 14:07:30 turing kernel: pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
abr 16 14:07:30 turing kernel: pci 0000:00:1c.4: System wakeup disabled by ACPI
abr 16 14:07:30 turing kernel: pci 0000:00:1f.0: [8086:a14e] type 00 class 0x060100
abr 16 14:07:30 turing kernel: pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
abr 16 14:07:30 turing kernel: pci 0000:00:1f.2: reg 0x10: [mem 0xdd32c000-0xdd32ffff]
abr 16 14:07:30 turing kernel: pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
abr 16 14:07:30 turing kernel: pci 0000:00:1f.3: reg 0x10: [mem 0xdd328000-0xdd32bfff 64bit]
abr 16 14:07:30 turing kernel: pci 0000:00:1f.3: reg 0x20: [mem 0xdd300000-0xdd30ffff 64bit]
abr 16 14:07:30 turing kernel: pci 0000:00:1f.3: PME# supported from D3hot D3cold
abr 16 14:07:30 turing kernel: pci 0000:00:1f.3: System wakeup disabled by ACPI
abr 16 14:07:30 turing kernel: pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
abr 16 14:07:30 turing kernel: pci 0000:00:1f.4: reg 0x10: [mem 0xdd332000-0xdd3320ff 64bit]
abr 16 14:07:30 turing kernel: pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
abr 16 14:07:30 turing kernel: pci 0000:01:00.0: [10de:139b] type 00 class 0x030200
abr 16 14:07:30 turing kernel: pci 0000:01:00.0: reg 0x10: [mem 0xdc000000-0xdcffffff]
abr 16 14:07:30 turing kernel: pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
abr 16 14:07:30 turing kernel: pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
abr 16 14:07:30 turing kernel: pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
abr 16 14:07:30 turing kernel: pci 0000:01:00.0: reg 0x30: [mem 0xdd000000-0xdd07ffff pref]
abr 16 14:07:30 turing kernel: pci 0000:01:00.0: System wakeup disabled by ACPI
abr 16 14:07:30 turing kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
abr 16 14:07:30 turing kernel: pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
abr 16 14:07:30 turing kernel: pci 0000:00:01.0:   bridge window [mem 0xdc000000-0xdd0fffff]
abr 16 14:07:30 turing kernel: pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
abr 16 14:07:30 turing kernel: pci 0000:02:00.0: [1aea:6621] type 00 class 0xff0000
abr 16 14:07:30 turing kernel: pci 0000:02:00.0: reg 0x10: [mem 0xdd200000-0xdd2000ff 64bit]
abr 16 14:07:30 turing kernel: pci 0000:02:00.0: System wakeup disabled by ACPI
abr 16 14:07:30 turing kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
abr 16 14:07:30 turing kernel: pci 0000:00:1c.0:   bridge window [mem 0xdd200000-0xdd2fffff]
abr 16 14:07:30 turing kernel: pci 0000:03:00.0: [8086:095a] type 00 class 0x028000
abr 16 14:07:30 turing kernel: pci 0000:03:00.0: reg 0x10: [mem 0xdd100000-0xdd101fff 64bit]
abr 16 14:07:30 turing kernel: pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
abr 16 14:07:30 turing kernel: pci 0000:03:00.0: System wakeup disabled by ACPI
abr 16 14:07:30 turing kernel: pci 0000:00:1c.2: PCI bridge to [bus 03]
abr 16 14:07:30 turing kernel: pci 0000:00:1c.2:   bridge window [mem 0xdd100000-0xdd1fffff]
abr 16 14:07:30 turing kernel: pci 0000:00:1c.4: PCI bridge to [bus 04-3c]
abr 16 14:07:30 turing kernel: pci 0000:00:1c.4:   bridge window [mem 0xc4000000-0xda0fffff]
abr 16 14:07:30 turing kernel: pci 0000:00:1c.4:   bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
abr 16 14:07:30 turing kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
abr 16 14:07:30 turing kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
abr 16 14:07:30 turing kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
abr 16 14:07:30 turing kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
abr 16 14:07:30 turing kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
abr 16 14:07:30 turing kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
abr 16 14:07:30 turing kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
abr 16 14:07:30 turing kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
abr 16 14:07:30 turing kernel: ACPI: Enabled 6 GPEs in block 00 to 7F
abr 16 14:07:30 turing kernel: ACPI : EC: event unblocked
abr 16 14:07:30 turing kernel: ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x23, EC_CMD/EC_SC=0x66, EC_DATA=0x62
abr 16 14:07:30 turing kernel: ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
abr 16 14:07:30 turing kernel: pci 0000:00:02.0: vgaarb: setting as boot VGA device
abr 16 14:07:30 turing kernel: pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
abr 16 14:07:30 turing kernel: pci 0000:00:02.0: vgaarb: bridge control possible
abr 16 14:07:30 turing kernel: vgaarb: loaded
abr 16 14:07:30 turing kernel: Registered efivars operations
abr 16 14:07:30 turing kernel: PCI: Using ACPI for IRQ routing
abr 16 14:07:30 turing kernel: PCI: pci_cache_line_size set to 64 bytes
abr 16 14:07:30 turing kernel: e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
abr 16 14:07:30 turing kernel: e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
abr 16 14:07:30 turing kernel: e820: reserve RAM buffer [mem 0x2f43e000-0x2fffffff]
abr 16 14:07:30 turing kernel: e820: reserve RAM buffer [mem 0x35137000-0x37ffffff]
abr 16 14:07:30 turing kernel: e820: reserve RAM buffer [mem 0x361f5000-0x37ffffff]
abr 16 14:07:30 turing kernel: e820: reserve RAM buffer [mem 0x37fff000-0x37ffffff]
abr 16 14:07:30 turing kernel: e820: reserve RAM buffer [mem 0x4c2000000-0x4c3ffffff]
abr 16 14:07:30 turing kernel: NetLabel: Initializing
abr 16 14:07:30 turing kernel: NetLabel:  domain hash size = 128
abr 16 14:07:30 turing kernel: NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
abr 16 14:07:30 turing kernel: NetLabel:  unlabeled traffic allowed by default
abr 16 14:07:30 turing kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
abr 16 14:07:30 turing kernel: hpet0: 8 comparators, 64-bit 24.000000 MHz counter
abr 16 14:07:30 turing kernel: clocksource: Switched to clocksource hpet
abr 16 14:07:30 turing kernel: VFS: Disk quotas dquot_6.6.0
abr 16 14:07:30 turing kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
abr 16 14:07:30 turing kernel: pnp: PnP ACPI init
abr 16 14:07:30 turing kernel: system 00:00: [io  0x0680-0x069f] has been reserved
abr 16 14:07:30 turing kernel: system 00:00: [io  0xffff] has been reserved
abr 16 14:07:30 turing kernel: system 00:00: [io  0xffff] has been reserved
abr 16 14:07:30 turing kernel: system 00:00: [io  0xffff] has been reserved
abr 16 14:07:30 turing kernel: system 00:00: [io  0x1800-0x18fe] has been reserved
abr 16 14:07:30 turing kernel: system 00:00: [io  0x164e-0x164f] has been reserved
abr 16 14:07:30 turing kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
abr 16 14:07:30 turing kernel: system 00:01: [io  0x0800-0x087f] has been reserved
abr 16 14:07:30 turing kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
abr 16 14:07:30 turing kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
abr 16 14:07:30 turing kernel: system 00:03: [io  0x1854-0x1857] has been reserved
abr 16 14:07:30 turing kernel: system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
abr 16 14:07:30 turing kernel: system 00:04: [io  0x0240-0x0259] has been reserved
abr 16 14:07:30 turing kernel: system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
abr 16 14:07:30 turing kernel: pnp 00:05: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
abr 16 14:07:30 turing kernel: system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
abr 16 14:07:30 turing kernel: system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
abr 16 14:07:30 turing kernel: system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
abr 16 14:07:30 turing kernel: system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
abr 16 14:07:30 turing kernel: system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
abr 16 14:07:30 turing kernel: system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
abr 16 14:07:30 turing kernel: system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
abr 16 14:07:30 turing kernel: system 00:06: [mem 0xff000000-0xffffffff] has been reserved
abr 16 14:07:30 turing kernel: system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
abr 16 14:07:30 turing kernel: system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
abr 16 14:07:30 turing kernel: system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
abr 16 14:07:30 turing kernel: system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
abr 16 14:07:30 turing kernel: system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
abr 16 14:07:30 turing kernel: system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
abr 16 14:07:30 turing kernel: system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
abr 16 14:07:30 turing kernel: system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
abr 16 14:07:30 turing kernel: system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
abr 16 14:07:30 turing kernel: system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
abr 16 14:07:30 turing kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
abr 16 14:07:30 turing kernel: system 00:08: [io  0xff00-0xfffe] has been reserved
abr 16 14:07:30 turing kernel: system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
abr 16 14:07:30 turing kernel: system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
abr 16 14:07:30 turing kernel: system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
abr 16 14:07:30 turing kernel: system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
abr 16 14:07:30 turing kernel: system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
abr 16 14:07:30 turing kernel: pnp: PnP ACPI: found 10 devices
abr 16 14:07:30 turing kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
abr 16 14:07:30 turing kernel: pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 04-3c] add_size 1000
abr 16 14:07:30 turing kernel: pci 0000:00:1c.4: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
abr 16 14:07:30 turing kernel: pci 0000:00:1c.4: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
abr 16 14:07:30 turing kernel: pci 0000:00:1c.4: BAR 13: assigned [io  0x2000-0x2fff]
abr 16 14:07:30 turing kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
abr 16 14:07:30 turing kernel: pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
abr 16 14:07:30 turing kernel: pci 0000:00:01.0:   bridge window [mem 0xdc000000-0xdd0fffff]
abr 16 14:07:30 turing kernel: pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
abr 16 14:07:30 turing kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
abr 16 14:07:30 turing kernel: pci 0000:00:1c.0:   bridge window [mem 0xdd200000-0xdd2fffff]
abr 16 14:07:30 turing kernel: pci 0000:00:1c.2: PCI bridge to [bus 03]
abr 16 14:07:30 turing kernel: pci 0000:00:1c.2:   bridge window [mem 0xdd100000-0xdd1fffff]
abr 16 14:07:30 turing kernel: pci 0000:00:1c.4: PCI bridge to [bus 04-3c]
abr 16 14:07:30 turing kernel: pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
abr 16 14:07:30 turing kernel: pci 0000:00:1c.4:   bridge window [mem 0xc4000000-0xda0fffff]
abr 16 14:07:30 turing kernel: pci 0000:00:1c.4:   bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
abr 16 14:07:30 turing kernel: pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
abr 16 14:07:30 turing kernel: pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
abr 16 14:07:30 turing kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
abr 16 14:07:30 turing kernel: pci_bus 0000:00: resource 7 [mem 0x3d000000-0xdfffffff window]
abr 16 14:07:30 turing kernel: pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
abr 16 14:07:30 turing kernel: pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
abr 16 14:07:30 turing kernel: pci_bus 0000:01: resource 1 [mem 0xdc000000-0xdd0fffff]
abr 16 14:07:30 turing kernel: pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
abr 16 14:07:30 turing kernel: pci_bus 0000:02: resource 1 [mem 0xdd200000-0xdd2fffff]
abr 16 14:07:30 turing kernel: pci_bus 0000:03: resource 1 [mem 0xdd100000-0xdd1fffff]
abr 16 14:07:30 turing kernel: pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
abr 16 14:07:30 turing kernel: pci_bus 0000:04: resource 1 [mem 0xc4000000-0xda0fffff]
abr 16 14:07:30 turing kernel: pci_bus 0000:04: resource 2 [mem 0x80000000-0xa1ffffff 64bit pref]
abr 16 14:07:30 turing kernel: NET: Registered protocol family 2
abr 16 14:07:30 turing kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
abr 16 14:07:30 turing kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
abr 16 14:07:30 turing kernel: TCP: Hash tables configured (established 131072 bind 65536)
abr 16 14:07:30 turing kernel: UDP hash table entries: 8192 (order: 6, 262144 bytes)
abr 16 14:07:30 turing kernel: UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
abr 16 14:07:30 turing kernel: NET: Registered protocol family 1
abr 16 14:07:30 turing kernel: pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
abr 16 14:07:30 turing kernel: PCI: CLS 0 bytes, default 64
abr 16 14:07:30 turing kernel: Unpacking initramfs...
abr 16 14:07:30 turing kernel: Freeing initrd memory: 5680K
abr 16 14:07:30 turing kernel: DMAR: ACPI device "device:78" under DMAR at fed91000 as 00:15.0
abr 16 14:07:30 turing kernel: DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.1
abr 16 14:07:30 turing kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
abr 16 14:07:30 turing kernel: software IO TLB [mem 0x2a385000-0x2e385000] (64MB) mapped at [ffff88002a385000-ffff88002e384fff]
abr 16 14:07:30 turing kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns
abr 16 14:07:30 turing kernel: Scanning for low memory corruption every 60 seconds
abr 16 14:07:30 turing kernel: Initialise system trusted keyrings
abr 16 14:07:30 turing kernel: workingset: timestamp_bits=40 max_order=22 bucket_order=0
abr 16 14:07:30 turing kernel: zbud: loaded
abr 16 14:07:30 turing kernel: Key type asymmetric registered
abr 16 14:07:30 turing kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
abr 16 14:07:30 turing kernel: io scheduler noop registered
abr 16 14:07:30 turing kernel: io scheduler deadline registered
abr 16 14:07:30 turing kernel: io scheduler cfq registered (default)
abr 16 14:07:30 turing kernel: efifb: probing for efifb
abr 16 14:07:30 turing kernel: efifb: framebuffer at 0x70000000, using 3072k, total 3072k
abr 16 14:07:30 turing kernel: efifb: mode is 1024x768x32, linelength=4096, pages=1
abr 16 14:07:30 turing kernel: efifb: scrolling: redraw
abr 16 14:07:30 turing kernel: efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
abr 16 14:07:30 turing kernel: Console: switching to colour frame buffer device 128x48
abr 16 14:07:30 turing kernel: fb0: EFI VGA frame buffer device
abr 16 14:07:30 turing kernel: intel_idle: MWAIT substates: 0x11142120
abr 16 14:07:30 turing kernel: intel_idle: v0.4.1 model 0x5E
abr 16 14:07:30 turing kernel: intel_idle: lapic_timer_reliable_states 0xffffffff
abr 16 14:07:30 turing kernel: GHES: HEST is not enabled!
abr 16 14:07:30 turing kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
abr 16 14:07:30 turing kernel: Linux agpgart interface v0.103
abr 16 14:07:30 turing kernel: rtc_cmos 00:02: RTC can wake from S4
abr 16 14:07:30 turing kernel: rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
abr 16 14:07:30 turing kernel: rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
abr 16 14:07:30 turing kernel: intel_pstate: Intel P-state driver initializing
abr 16 14:07:30 turing kernel: intel_pstate: HWP enabled
abr 16 14:07:30 turing kernel: ledtrig-cpu: registered to indicate activity on CPUs
abr 16 14:07:30 turing kernel: NET: Registered protocol family 10
abr 16 14:07:30 turing kernel: Segment Routing with IPv6
abr 16 14:07:30 turing kernel: NET: Registered protocol family 17
abr 16 14:07:30 turing kernel: microcode: sig=0x506e3, pf=0x20, revision=0x74
abr 16 14:07:30 turing kernel: microcode: Microcode Update Driver: v2.2.
abr 16 14:07:30 turing kernel: registered taskstats version 1
abr 16 14:07:30 turing kernel: Loading compiled-in X.509 certificates
abr 16 14:07:30 turing kernel: zswap: loaded using pool lzo/zbud
abr 16 14:07:30 turing kernel:   Magic number: 13:525:127
abr 16 14:07:30 turing kernel: acpi device:02: hash matches
abr 16 14:07:30 turing kernel: rtc_cmos 00:02: setting system clock to 2017-04-16 12:07:28 UTC (1492344448)
abr 16 14:07:30 turing kernel: PM: Hibernation image not present or could not be loaded.
abr 16 14:07:30 turing kernel: Freeing unused kernel memory: 1292K
abr 16 14:07:30 turing kernel: Write protecting the kernel read-only data: 10240k
abr 16 14:07:30 turing kernel: Freeing unused kernel memory: 1812K
abr 16 14:07:30 turing kernel: Freeing unused kernel memory: 64K
abr 16 14:07:30 turing kernel: random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
abr 16 14:07:30 turing kernel: random: systemd-udevd: uninitialized urandom read (16 bytes read)
abr 16 14:07:30 turing kernel: random: systemd-udevd: uninitialized urandom read (16 bytes read)
abr 16 14:07:30 turing kernel: random: udevadm: uninitialized urandom read (16 bytes read)
abr 16 14:07:30 turing kernel: random: udevadm: uninitialized urandom read (16 bytes read)
abr 16 14:07:30 turing kernel: random: systemd-udevd: uninitialized urandom read (16 bytes read)
abr 16 14:07:30 turing kernel: random: systemd-udevd: uninitialized urandom read (16 bytes read)
abr 16 14:07:30 turing kernel: random: systemd-udevd: uninitialized urandom read (16 bytes read)
abr 16 14:07:30 turing kernel: random: systemd-udevd: uninitialized urandom read (16 bytes read)
abr 16 14:07:30 turing kernel: random: systemd-udevd: uninitialized urandom read (16 bytes read)
abr 16 14:07:30 turing kernel: i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
abr 16 14:07:30 turing kernel: i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
abr 16 14:07:30 turing kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
abr 16 14:07:30 turing kernel: ACPI: bus type USB registered
abr 16 14:07:30 turing kernel: usbcore: registered new interface driver usbfs
abr 16 14:07:30 turing kernel: usbcore: registered new interface driver hub
abr 16 14:07:30 turing kernel: usbcore: registered new device driver usb
abr 16 14:07:30 turing kernel: SCSI subsystem initialized
abr 16 14:07:30 turing kernel: libata version 3.00 loaded.
abr 16 14:07:30 turing kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
abr 16 14:07:30 turing kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
abr 16 14:07:30 turing kernel: xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
abr 16 14:07:30 turing kernel: xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
abr 16 14:07:30 turing kernel: hub 1-0:1.0: USB hub found
abr 16 14:07:30 turing kernel: hub 1-0:1.0: 16 ports detected
abr 16 14:07:30 turing kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
abr 16 14:07:30 turing kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
abr 16 14:07:30 turing kernel: hub 2-0:1.0: USB hub found
abr 16 14:07:30 turing kernel: hub 2-0:1.0: 8 ports detected
abr 16 14:07:30 turing kernel: ahci 0000:00:17.0: version 3.0
abr 16 14:07:30 turing kernel: ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
abr 16 14:07:30 turing kernel: ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst 
abr 16 14:07:30 turing kernel: scsi host0: ahci
abr 16 14:07:30 turing kernel: scsi host1: ahci
abr 16 14:07:30 turing kernel: scsi host2: ahci
abr 16 14:07:30 turing kernel: ata1: SATA max UDMA/133 abar m2048@0xdd333000 port 0xdd333100 irq 124
abr 16 14:07:30 turing kernel: ata2: SATA max UDMA/133 abar m2048@0xdd333000 port 0xdd333180 irq 124
abr 16 14:07:30 turing kernel: ata3: SATA max UDMA/133 abar m2048@0xdd333000 port 0xdd333200 irq 124
abr 16 14:07:30 turing kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
abr 16 14:07:30 turing kernel: usb 1-4: new high-speed USB device number 2 using xhci_hcd
abr 16 14:07:30 turing kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 16 14:07:30 turing kernel: ata2: SATA link down (SStatus 4 SControl 300)
abr 16 14:07:30 turing kernel: ata3: SATA link down (SStatus 4 SControl 300)
abr 16 14:07:30 turing kernel: ata1.00: ATA-9: SanDisk SD8SNAT256G1002, Z2317002, max UDMA/133
abr 16 14:07:30 turing kernel: ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
abr 16 14:07:30 turing kernel: ata1.00: configured for UDMA/133
abr 16 14:07:30 turing kernel: scsi 0:0:0:0: Direct-Access     ATA      SanDisk SD8SNAT2 7002 PQ: 0 ANSI: 5
abr 16 14:07:30 turing kernel: sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
abr 16 14:07:30 turing kernel: sd 0:0:0:0: [sda] Write Protect is off
abr 16 14:07:30 turing kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
abr 16 14:07:30 turing kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
abr 16 14:07:30 turing kernel:  sda: sda1 sda2 sda3 sda4
abr 16 14:07:30 turing kernel: sd 0:0:0:0: [sda] Attached SCSI disk
abr 16 14:07:30 turing kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
abr 16 14:07:30 turing kernel: random: fast init done
abr 16 14:07:30 turing kernel: usb 1-6: new full-speed USB device number 3 using xhci_hcd
abr 16 14:07:30 turing kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
abr 16 14:07:30 turing systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
abr 16 14:07:30 turing systemd[1]: Detected architecture x86-64.
abr 16 14:07:30 turing systemd[1]: Set hostname to <turing>.
abr 16 14:07:30 turing kernel: clocksource: Switched to clocksource tsc
abr 16 14:07:30 turing systemd[1]: Reached target Login Prompts.
abr 16 14:07:30 turing systemd[1]: Listening on udev Kernel Socket.
abr 16 14:07:30 turing systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
abr 16 14:07:30 turing systemd[1]: Listening on LVM2 metadata daemon socket.
abr 16 14:07:30 turing systemd[1]: Created slice User and Session Slice.
abr 16 14:07:30 turing systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
abr 16 14:07:30 turing systemd[1]: Listening on Process Core Dump Socket.
abr 16 14:07:30 turing kernel: EXT4-fs (sda2): re-mounted. Opts: data=ordered
abr 16 14:07:30 turing kernel: usb 1-9: new full-speed USB device number 4 using xhci_hcd
abr 16 14:07:30 turing kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
abr 16 14:07:30 turing kernel: hidraw: raw HID events driver (C) Jiri Kosina
abr 16 14:07:30 turing kernel: hid_asus_fte: loading out-of-tree module taints kernel.
abr 16 14:07:30 turing kernel: vboxdrv: Found 8 processor cores
abr 16 14:07:30 turing kernel: vboxdrv: TSC mode is Invariant, tentative frequency 2592000792 Hz
abr 16 14:07:30 turing kernel: vboxdrv: Successfully loaded version 5.1.18 (interface 0x00280000)
abr 16 14:07:30 turing kernel: VBoxPciLinuxInit
abr 16 14:07:30 turing kernel: vboxpci: IOMMU not found (not registered)
abr 16 14:07:30 turing kernel: VBoxNetAdp: Successfully started.
abr 16 14:07:30 turing kernel: VBoxNetFlt: Successfully started.
abr 16 14:07:30 turing kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
abr 16 14:07:30 turing kernel: ACPI: AC Adapter [AC0] (on-line)
abr 16 14:07:30 turing kernel: ACPI: Lid Switch [LID]
abr 16 14:07:30 turing kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
abr 16 14:07:30 turing kernel: ACPI: Sleep Button [SLPB]
abr 16 14:07:30 turing kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
abr 16 14:07:30 turing kernel: ACPI: Power Button [PWRF]
abr 16 14:07:30 turing kernel: FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
abr 16 14:07:30 turing kernel: tpm_crb MSFT0101:00: can't request region for resource [mem 0xfed40080-0xfed40fff]
abr 16 14:07:30 turing kernel: tpm_crb: probe of MSFT0101:00 failed with error -16
abr 16 14:07:30 turing kernel: input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input4
abr 16 14:07:30 turing kernel: ACPI: Battery Slot [BAT0] (battery present)
abr 16 14:07:30 turing kernel: wmi: Mapper loaded
abr 16 14:07:30 turing kernel: Bluetooth: Core ver 2.22
abr 16 14:07:30 turing kernel: NET: Registered protocol family 31
abr 16 14:07:30 turing kernel: Bluetooth: HCI device and connection manager initialized
abr 16 14:07:30 turing kernel: Bluetooth: HCI socket layer initialized
abr 16 14:07:30 turing kernel: Bluetooth: L2CAP socket layer initialized
abr 16 14:07:30 turing kernel: Bluetooth: SCO socket layer initialized
abr 16 14:07:30 turing kernel: (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
abr 16 14:07:30 turing kernel: thermal LNXTHERM:00: registered as thermal_zone5
abr 16 14:07:30 turing kernel: ACPI: Thermal Zone [THRM] (34 C)
abr 16 14:07:30 turing kernel: intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
abr 16 14:07:30 turing kernel: input: PC Speaker as /devices/platform/pcspkr/input/input5
abr 16 14:07:30 turing kernel: idma64 idma64.0: Found Intel integrated DMA 64-bit
abr 16 14:07:30 turing kernel: Bluetooth: HCI UART driver ver 2.3
abr 16 14:07:30 turing kernel: Bluetooth: HCI UART protocol H4 registered
abr 16 14:07:30 turing kernel: Bluetooth: HCI UART protocol BCSP registered
abr 16 14:07:30 turing kernel: Bluetooth: HCI UART protocol LL registered
abr 16 14:07:30 turing kernel: Bluetooth: HCI UART protocol ATH3K registered
abr 16 14:07:30 turing kernel: Bluetooth: HCI UART protocol Three-wire (H5) registered
abr 16 14:07:30 turing kernel: Bluetooth: HCI UART protocol Intel registered
abr 16 14:07:30 turing kernel: Bluetooth: HCI UART protocol Broadcom registered
abr 16 14:07:30 turing kernel: Bluetooth: HCI UART protocol QCA registered
abr 16 14:07:30 turing kernel: Bluetooth: HCI UART protocol AG6XX registered
abr 16 14:07:30 turing kernel: Bluetooth: HCI UART protocol Marvell registered
abr 16 14:07:30 turing kernel: intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
abr 16 14:07:30 turing kernel: idma64 idma64.1: Found Intel integrated DMA 64-bit
abr 16 14:07:30 turing kernel: (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
abr 16 14:07:30 turing kernel: RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
abr 16 14:07:30 turing kernel: RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
abr 16 14:07:30 turing kernel: RAPL PMU: hw unit of domain package 2^-14 Joules
abr 16 14:07:30 turing kernel: RAPL PMU: hw unit of domain dram 2^-14 Joules
abr 16 14:07:30 turing kernel: RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
abr 16 14:07:30 turing kernel: RAPL PMU: hw unit of domain psys 2^-14 Joules
abr 16 14:07:30 turing kernel: i801_smbus 0000:00:1f.4: SPD Write Disable is set
abr 16 14:07:30 turing kernel: i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
abr 16 14:07:30 turing kernel: usbcore: registered new interface driver btusb
abr 16 14:07:30 turing kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
abr 16 14:07:30 turing kernel: mei_me 0000:00:16.0: enabling device (0000 -> 0002)
abr 16 14:07:30 turing kernel: FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
abr 16 14:07:30 turing kernel: Bluetooth: hci0: read Intel version: 370810011003110e00
abr 16 14:07:30 turing kernel: [drm] Initialized
abr 16 14:07:30 turing kernel: AVX2 version of gcm_enc/dec engaged.
abr 16 14:07:30 turing kernel: AES CTR mode by8 optimization enabled
abr 16 14:07:30 turing kernel: Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
abr 16 14:07:30 turing kernel: asus_wmi: ASUS WMI generic driver loaded
abr 16 14:07:30 turing kernel: Adding 2097148k swap on /dev/sda4.  Priority:-1 extents:1 across:2097148k SSFS
abr 16 14:07:30 turing systemd-journald[192]: Journal started
abr 16 14:07:30 turing systemd-journald[192]: System journal (/var/log/journal/c98475484561449d9790fc81060533ad) is 2.3G, max 4.0G, 1.6G free.
abr 16 14:07:30 turing kernel: iTCO_vendor_support: vendor-support=0
abr 16 14:07:30 turing kernel: asus_wmi: Initialization: 0x1
abr 16 14:07:30 turing kernel: asus_wmi: BIOS WMI version: 7.9
abr 16 14:07:30 turing kernel: asus_wmi: SFUN value: 0xa0065
abr 16 14:07:30 turing kernel: input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input6
abr 16 14:07:30 turing kernel: asus_wmi: Number of fans: 1
abr 16 14:07:30 turing kernel: Intel(R) Wireless WiFi driver for Linux
abr 16 14:07:30 turing kernel: Copyright(c) 2003- 2015 Intel Corporation
abr 16 14:07:30 turing kernel: iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-26.ucode failed with error -2
abr 16 14:07:30 turing kernel: iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-25.ucode failed with error -2
abr 16 14:07:30 turing kernel: iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
abr 16 14:07:30 turing kernel: iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
abr 16 14:07:30 turing kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
abr 16 14:07:30 turing kernel: iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
abr 16 14:07:30 turing kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
abr 16 14:07:30 turing kernel: iwlwifi 0000:03:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm
abr 16 14:07:29 turing systemd-modules-load[198]: Inserted module 'sg'
abr 16 14:07:30 turing kernel: media: Linux media interface: v0.10
abr 16 14:07:30 turing kernel: usbcore: registered new interface driver usbhid
abr 16 14:07:30 turing kernel: usbhid: USB HID core driver
abr 16 14:07:30 turing mtp-probe[288]: checking bus 1, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6"
abr 16 14:07:30 turing kernel: Linux video capture interface: v2.00
abr 16 14:07:30 turing kernel: [drm] Memory usable by graphics device = 4096M
abr 16 14:07:30 turing kernel: checking generic (70000000 300000) vs hw (70000000 10000000)
abr 16 14:07:30 turing kernel: fb: switching to inteldrmfb from EFI VGA
abr 16 14:07:30 turing kernel: Console: switching to colour dummy device 80x25
abr 16 14:07:30 turing kernel: [drm] Replacing VGA console driver
abr 16 14:07:30 turing kernel: logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-6/input2
abr 16 14:07:30 turing kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
abr 16 14:07:30 turing kernel: [drm] Driver supports precise vblank timestamp query.
abr 16 14:07:30 turing kernel: i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
abr 16 14:07:30 turing systemd-journald[192]: System journal (/var/log/journal/c98475484561449d9790fc81060533ad) is 2.3G, max 4.0G, 1.6G free.
abr 16 14:07:30 turing kernel: [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
abr 16 14:07:30 turing kernel: iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
abr 16 14:07:30 turing kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
abr 16 14:07:30 turing kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
abr 16 14:07:30 turing kernel: [drm] GuC firmware load skipped
abr 16 14:07:30 turing kernel: ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
abr 16 14:07:30 turing kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
abr 16 14:07:30 turing kernel: ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
abr 16 14:07:30 turing kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input8
abr 16 14:07:30 turing kernel: uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b3fd)
abr 16 14:07:30 turing kernel: uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!
abr 16 14:07:30 turing kernel: uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized!
abr 16 14:07:30 turing kernel: uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
abr 16 14:07:30 turing kernel: input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input9
abr 16 14:07:30 turing kernel: usbcore: registered new interface driver uvcvideo
abr 16 14:07:30 turing kernel: USB Video Class driver (1.1.1)
abr 16 14:07:30 turing kernel: snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
abr 16 14:07:30 turing kernel: [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
abr 16 14:07:30 turing kernel: intel_rapl: Found RAPL domain package
abr 16 14:07:30 turing kernel: intel_rapl: Found RAPL domain core
abr 16 14:07:30 turing kernel: intel_rapl: Found RAPL domain uncore
abr 16 14:07:30 turing kernel: intel_rapl: Found RAPL domain dram
abr 16 14:07:30 turing kernel: fbcon: inteldrmfb (fb0) is primary device
abr 16 14:07:30 turing kernel: ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
abr 16 14:07:30 turing kernel: iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
abr 16 14:07:30 turing kernel: nvidia: module license 'NVIDIA' taints kernel.
abr 16 14:07:30 turing kernel: Disabling lock debugging due to kernel taint
abr 16 14:07:30 turing kernel: nvidia-nvlink: Nvlink Core is being initialized, major device number 243
abr 16 14:07:30 turing kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  378.13  Tue Feb  7 20:10:06 PST 2017
abr 16 14:07:30 turing kernel:  (using threaded interrupts)
abr 16 14:07:30 turing kernel: 
abr 16 14:07:30 turing kernel: nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  378.13  Tue Feb  7 18:30:08 PST 2017
abr 16 14:07:30 turing kernel: [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
abr 16 14:07:30 turing kernel: EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
abr 16 14:07:30 turing kernel: random: crng init done
abr 16 14:07:30 turing kernel: input: Logitech M325 as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.2/0003:046D:C52B.0003/0003:046D:400A.0004/input/input10
abr 16 14:07:30 turing kernel: logitech-hidpp-device 0003:046D:400A.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:14.0-6:1
abr 16 14:07:30 turing kernel: mousedev: PS/2 mouse device common for all mice
abr 16 14:07:29 turing systemd-modules-load[198]: Inserted module 'hid_asus_fte'
abr 16 14:07:30 turing mtp-probe[288]: bus: 1, device: 3 was not an MTP device
abr 16 14:07:29 turing systemd-modules-load[198]: Inserted module 'vboxdrv'
abr 16 14:07:30 turing mtp-probe[287]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4"
abr 16 14:07:29 turing systemd-modules-load[198]: Inserted module 'vboxpci'
abr 16 14:07:30 turing mtp-probe[287]: bus: 1, device: 2 was not an MTP device
abr 16 14:07:29 turing systemd-modules-load[198]: Inserted module 'vboxnetadp'
abr 16 14:07:29 turing systemd-modules-load[198]: Inserted module 'vboxnetflt'
abr 16 14:07:30 turing systemd[1]: Starting Flush Journal to Persistent Storage...
abr 16 14:07:30 turing systemd[1]: Reached target Bluetooth.
abr 16 14:07:30 turing systemd[1]: Created slice system-systemd\x2dbacklight.slice.
abr 16 14:07:30 turing systemd[1]: Starting Load/Save Screen Backlight Brightness of leds:asus::kbd_backlight...
abr 16 14:07:30 turing systemd[1]: Started Load/Save RF Kill Switch Status.
abr 16 14:07:30 turing systemd[1]: Started Load/Save Screen Backlight Brightness of leds:asus::kbd_backlight.
abr 16 14:07:30 turing systemd-udevd[240]: Process '/usr/bin/systemctl start hdmi_sound_toggle.service' failed with exit code 5.
abr 16 14:07:30 turing systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:intel_backlight...
abr 16 14:07:30 turing systemd-fsck[269]: /dev/sda3: limpio, 226121/11501568 ficheros, 26560741/45981696 bloques
abr 16 14:07:30 turing systemd-udevd[251]: Process '/usr/bin/systemctl start hdmi_sound_toggle.service' failed with exit code 5.
abr 16 14:07:30 turing systemd-udevd[251]: Process '/usr/bin/systemctl start hdmi_sound_toggle.service' failed with exit code 5.
abr 16 14:07:30 turing systemd-udevd[251]: Process '/usr/bin/systemctl start hdmi_sound_toggle.service' failed with exit code 5.
abr 16 14:07:30 turing systemd[1]: Started File System Check on /dev/disk/by-uuid/8e14731c-6358-44c0-b59d-300466cd095a.
abr 16 14:07:30 turing systemd[1]: Mounting /home...
abr 16 14:07:30 turing systemd-udevd[251]: Process '/usr/bin/systemctl start hdmi_sound_toggle.service' failed with exit code 5.
abr 16 14:07:30 turing systemd[1]: Mounted /home.
abr 16 14:07:30 turing systemd[1]: Reached target Local File Systems.
abr 16 14:07:30 turing systemd[1]: Starting Rebuild Dynamic Linker Cache...
abr 16 14:07:30 turing systemd[1]: Starting Rebuild Journal Catalog...
abr 16 14:07:30 turing systemd[1]: Started Flush Journal to Persistent Storage.
abr 16 14:07:30 turing systemd[1]: Starting Create Volatile Files and Directories...
abr 16 14:07:30 turing systemd[1]: Started Rebuild Journal Catalog.
abr 16 14:07:30 turing systemd-tmpfiles[413]: Cannot set file attribute for '/var/log/journal', value=0x00800000, mask=0x00800000: Operation not supported
abr 16 14:07:30 turing systemd-tmpfiles[413]: Cannot set file attribute for '/var/log/journal/c98475484561449d9790fc81060533ad', value=0x00800000, mask=0x00800000: Operation not supported
abr 16 14:07:30 turing systemd-tmpfiles[413]: Cannot set file attribute for '/var/log/journal/remote', value=0x00800000, mask=0x00800000: Operation not supported
abr 16 14:07:30 turing systemd[1]: Started Create Volatile Files and Directories.
abr 16 14:07:30 turing systemd[1]: Starting Update UTMP about System Boot/Shutdown...
abr 16 14:07:30 turing systemd[1]: Starting Network Time Synchronization...
abr 16 14:07:30 turing systemd[1]: Started Update UTMP about System Boot/Shutdown.
abr 16 14:07:30 turing systemd[1]: Started Network Time Synchronization.
abr 16 14:07:30 turing systemd[1]: Reached target System Time Synchronized.
abr 16 14:07:30 turing systemd[1]: Started Rebuild Dynamic Linker Cache.
abr 16 14:07:30 turing systemd[1]: Starting Update is Completed...
abr 16 14:07:30 turing systemd[1]: Started Update is Completed.
abr 16 14:07:31 turing systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:intel_backlight.
abr 16 14:07:31 turing systemd[1]: Reached target System Initialization.
abr 16 14:07:31 turing systemd[1]: Started Daily verification of password and group files.
abr 16 14:07:31 turing systemd[1]: Started CUPS Scheduler.
abr 16 14:07:31 turing systemd[1]: Reached target Paths.
abr 16 14:07:31 turing systemd[1]: Listening on D-Bus System Message Bus Socket.
abr 16 14:07:31 turing systemd[1]: Started Daily rotation of log files.
abr 16 14:07:31 turing systemd[1]: Started Daily Cleanup of Temporary Directories.
abr 16 14:07:31 turing systemd[1]: Listening on CUPS Scheduler.
abr 16 14:07:31 turing systemd[1]: Reached target Sockets.
abr 16 14:07:31 turing systemd[1]: Reached target Basic System.
abr 16 14:07:31 turing systemd[1]: Starting Login Service...
abr 16 14:07:31 turing systemd[1]: Started Daily man-db cache update.
abr 16 14:07:31 turing systemd[1]: Reached target Timers.
abr 16 14:07:31 turing systemd[1]: Started Brightness chown.
abr 16 14:07:31 turing systemd[1]: Started D-Bus System Message Bus.
abr 16 14:07:31 turing kernel: Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
abr 16 14:07:31 turing kernel: input: FTE1001:00 0B05:0101 as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-FTE1001:00/0018:0B05:0101.0005/input/input11
abr 16 14:07:31 turing kernel: hid-asus-fte 0018:0B05:0101.0005: input,hidraw2: I2C HID v1.00 Mouse [FTE1001:00 0B05:0101] on i2c-FTE1001:00
abr 16 14:07:31 turing kernel: Console: switching to colour frame buffer device 240x67
abr 16 14:07:31 turing kernel: i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
abr 16 14:07:31 turing systemd[1]: Starting Network Manager...
abr 16 14:07:31 turing systemd[1]: Started Login Service.
abr 16 14:07:31 turing systemd-logind[429]: New seat seat0.
abr 16 14:07:31 turing systemd-logind[429]: Watching system buttons on /dev/input/event3 (Power Button)
abr 16 14:07:31 turing systemd-logind[429]: Watching system buttons on /dev/input/event4 (Asus Wireless Radio Control)
abr 16 14:07:31 turing systemd-logind[429]: Watching system buttons on /dev/input/event7 (Video Bus)
abr 16 14:07:31 turing systemd-logind[429]: Watching system buttons on /dev/input/event8 (Video Bus)
abr 16 14:07:31 turing systemd-logind[429]: Watching system buttons on /dev/input/event1 (Lid Switch)
abr 16 14:07:31 turing systemd-logind[429]: Watching system buttons on /dev/input/event2 (Sleep Button)
abr 16 14:07:31 turing systemd-logind[429]: Watching system buttons on /dev/input/event6 (Asus WMI hotkeys)
abr 16 14:07:31 turing kernel: snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC668: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
abr 16 14:07:31 turing kernel: snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
abr 16 14:07:31 turing kernel: snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
abr 16 14:07:31 turing kernel: snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
abr 16 14:07:31 turing kernel: snd_hda_codec_realtek hdaudioC0D0:    inputs:
abr 16 14:07:31 turing kernel: snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x19
abr 16 14:07:31 turing kernel: snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x1b
abr 16 14:07:31 turing kernel: snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
abr 16 14:07:31 turing systemd[1]: Reached target Sound Card.
abr 16 14:07:31 turing kernel: input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
abr 16 14:07:31 turing kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
abr 16 14:07:31 turing kernel: input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
abr 16 14:07:31 turing kernel: input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.5575] NetworkManager (version 1.4.0) is starting...
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.5576] Read config: /etc/NetworkManager/NetworkManager.conf
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.5660] manager[0x204d0e0]: monitoring kernel firmware directory '/usr/lib/firmware'.
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.5703] dns-mgr[0x2045840]: init: dns=default, rc-manager=resolvconf
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.5760] rfkill3: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/ieee80211/phy0/rfkill3) (driver iwlwifi)
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.5763] rfkill1: found WiFi radio killswitch (at /sys/devices/platform/asus-nb-wmi/rfkill/rfkill1) (platform driver asus-nb-wmi)
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.5779] manager[0x204d0e0]: WiFi hardware radio set enabled
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.5779] manager[0x204d0e0]: WWAN hardware radio set enabled
abr 16 14:07:31 turing systemd[1]: Started Network Manager.
abr 16 14:07:31 turing systemd[1]: Reached target Network.
abr 16 14:07:31 turing systemd[1]: Started OpenSSH Daemon.
abr 16 14:07:31 turing systemd[1]: Starting Permit User Sessions...
abr 16 14:07:31 turing systemd[1]: Starting Samba NetBIOS name server...
abr 16 14:07:31 turing dbus[431]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
abr 16 14:07:31 turing systemd[1]: Started Permit User Sessions.
abr 16 14:07:31 turing systemd[1]: Started Simple Desktop Display Manager.
abr 16 14:07:31 turing systemd[1]: Starting Network Manager Script Dispatcher Service...
abr 16 14:07:31 turing dbus[431]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
abr 16 14:07:31 turing systemd[1]: Started Network Manager Script Dispatcher Service.
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.6247] settings: loaded plugin keyfile: (c) 2007 - 2015 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
abr 16 14:07:31 turing sshd[458]: Server listening on 0.0.0.0 port 22.
abr 16 14:07:31 turing sshd[458]: Server listening on :: port 22.
abr 16 14:07:31 turing kernel: [drm] RC6 on
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.6524] keyfile: new connection /etc/NetworkManager/system-connections/SAMSARA (0f04932a-8434-4da1-86d7-e0ba6a6edb33,"SAMSARA")
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.6673] keyfile: new connection /etc/NetworkManager/system-connections/JAZZTEL_2815 (d096ae3a-a8eb-4411-a6c1-765e282d5b4c,"JAZZTEL_2815")
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.6798] keyfile: new connection /etc/NetworkManager/system-connections/UPVNET (8a3850bc-e339-4e18-81ed-6214d5d9306a,"UPVNET")
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.6862] keyfile: new connection /etc/NetworkManager/system-connections/eduroam (4a24d5bb-b0bb-49c5-8723-696174f365e9,"eduroam")
abr 16 14:07:31 turing sddm[462]: Initializing...
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.6929] keyfile: new connection /etc/NetworkManager/system-connections/G3_3350 (c5f846bb-866d-4112-8eb9-5df258074d59,"G3_3350")
abr 16 14:07:31 turing sddm[462]: Starting...
abr 16 14:07:31 turing sddm[462]: Adding new display on vt 1 ...
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.7005] keyfile: new connection /etc/NetworkManager/system-connections/VPN UPV (023d2314-f12e-4b92-98f0-3d1f7b32239e,"VPN UPV")
abr 16 14:07:31 turing sddm[462]: Display server starting...
abr 16 14:07:31 turing sddm[462]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{51dfbf2e-66d4-4b32-8f2d-773330edac34} -background none -noreset -displayfd 18 vt1
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.7067] keyfile: new connection /etc/NetworkManager/system-connections/UPV-INFO (2c64ac2c-cb6d-4c3b-a24c-680ac7b218f5,"UPV-INFO")
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.7123] keyfile: new connection /etc/NetworkManager/system-connections/ONOD298 (ff8ef167-f32a-4053-8431-baa391f1f8ca,"ONOD298")
abr 16 14:07:31 turing dbus[431]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service'
abr 16 14:07:31 turing systemd[1]: Starting Hostname Service...
abr 16 14:07:31 turing systemd[1]: Started Samba NetBIOS name server.
abr 16 14:07:31 turing systemd[1]: Starting Samba SMB/CIFS server...
abr 16 14:07:31 turing nmbd[469]: [2017/04/16 14:07:31.783846,  0] ../lib/util/become_daemon.c:135(daemon_status)
abr 16 14:07:31 turing nmbd[469]:   STATUS=daemon 'nmbd' : No local IPv4 non-loopback interfaces available, waiting for interface ...NOTE: NetBIOS name resolution is not supported for Internet Protocol Version 6 (IPv6).
abr 16 14:07:31 turing dbus[431]: [system] Successfully activated service 'org.freedesktop.hostname1'
abr 16 14:07:31 turing systemd[1]: Started Hostname Service.
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.8596] settings: hostname: using hostnamed
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.8596] settings: hostname changed from (none) to "turing"
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.8598] dhcp-init: Using DHCP client 'internal'
abr 16 14:07:31 turing nm-dispatcher[463]: req:1 'hostname': new request (0 scripts)
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.8599] manager: WiFi enabled by radio killswitch; enabled by state file
abr 16 14:07:31 turing nm-dispatcher[463]: req:1 'hostname': completed: no scripts
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.8599] manager: WWAN enabled by radio killswitch; enabled by state file
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.8599] manager: Networking is enabled by state file
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.8600] Loaded device plugin: NMVxlanFactory (internal)
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.8600] Loaded device plugin: NMVlanFactory (internal)
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.8600] Loaded device plugin: NMVethFactory (internal)
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.8600] Loaded device plugin: NMTunFactory (internal)
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.8601] Loaded device plugin: NMMacvlanFactory (internal)
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.8601] Loaded device plugin: NMIPTunnelFactory (internal)
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.8601] Loaded device plugin: NMInfinibandFactory (internal)
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.8601] Loaded device plugin: NMEthernetFactory (internal)
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.8601] Loaded device plugin: NMBridgeFactory (internal)
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.8601] Loaded device plugin: NMBondFactory (internal)
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.8795] Loaded device plugin: NMTeamFactory (/usr/lib/NetworkManager/libnm-device-plugin-team.so)
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.8844] Loaded device plugin: NMWifiFactory (/usr/lib/NetworkManager/libnm-device-plugin-wifi.so)
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.8974] Loaded device plugin: NMWwanFactory (/usr/lib/NetworkManager/libnm-device-plugin-wwan.so)
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.9035] Loaded device plugin: NMBluezManager (/usr/lib/NetworkManager/libnm-device-plugin-bluetooth.so)
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.9048] Loaded device plugin: NMAtmManager (/usr/lib/NetworkManager/libnm-device-plugin-adsl.so)
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.9058] device (lo): link connected
abr 16 14:07:31 turing systemd[1]: Started Samba SMB/CIFS server.
abr 16 14:07:31 turing systemd[1]: Reached target Multi-User System.
abr 16 14:07:31 turing systemd[1]: Reached target Graphical Interface.
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.9065] manager: (lo): new Generic device (/org/freedesktop/NetworkManager/Devices/0)
abr 16 14:07:31 turing systemd[1]: Startup finished in 1.976s (kernel) + 2.656s (userspace) = 22.092s.
abr 16 14:07:31 turing kernel: IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
abr 16 14:07:31 turing kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
abr 16 14:07:31 turing kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.9068] (wlp3s0): using nl80211 for WiFi device control
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.9070] device (wlp3s0): driver supports Access Point (AP) mode
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.9076] manager: (wlp3s0): new 802.11 WiFi device (/org/freedesktop/NetworkManager/Devices/1)
abr 16 14:07:31 turing NetworkManager[435]: <info>  [1492344451.9085] device (wlp3s0): state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
abr 16 14:07:31 turing smbd[471]: [2017/04/16 14:07:31.941163,  0] ../lib/util/become_daemon.c:124(daemon_ready)
abr 16 14:07:31 turing smbd[471]:   STATUS=daemon 'smbd' finished starting up and ready to serve connections
abr 16 14:07:31 turing dbus[431]: [system] Activating via systemd: service name='org.freedesktop.Avahi' unit='dbus-org.freedesktop.Avahi.service'
abr 16 14:07:31 turing dbus[431]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.Avahi.service': Unit dbus-org.freedesktop.Avahi.service not found.
abr 16 14:07:31 turing kernel: ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
abr 16 14:07:31 turing kernel: ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
abr 16 14:07:31 turing kernel: ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
abr 16 14:07:31 turing kernel: ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
abr 16 14:07:31 turing kernel: ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
abr 16 14:07:31 turing kernel: ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
abr 16 14:07:31 turing kernel: ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
abr 16 14:07:31 turing kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
abr 16 14:07:31 turing kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
abr 16 14:07:32 turing kernel: IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
abr 16 14:07:32 turing NetworkManager[435]: <info>  [1492344452.0093] device (wlp3s0): set-hw-addr: set MAC address to 3A:18:6B:57:BE:58 (scanning)
abr 16 14:07:32 turing kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
abr 16 14:07:32 turing kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
abr 16 14:07:32 turing kernel: ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
abr 16 14:07:32 turing dbus[431]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service'
abr 16 14:07:32 turing systemd[1]: Starting Authorization Manager...
abr 16 14:07:32 turing dbus[431]: [system] Activating via systemd: service name='fi.w1.wpa_supplicant1' unit='wpa_supplicant.service'
abr 16 14:07:32 turing systemd[1]: Starting WPA supplicant...
abr 16 14:07:32 turing polkitd[481]: Started polkitd version 0.114
abr 16 14:07:32 turing dbus[431]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
abr 16 14:07:32 turing systemd[1]: Started WPA supplicant.
abr 16 14:07:32 turing NetworkManager[435]: <info>  [1492344452.1324] supplicant: wpa_supplicant running
abr 16 14:07:32 turing NetworkManager[435]: <info>  [1492344452.1324] device (wlp3s0): supplicant interface state: init -> starting
abr 16 14:07:32 turing polkitd[481]: Loading rules from directory /etc/polkit-1/rules.d
abr 16 14:07:32 turing polkitd[481]: Loading rules from directory /usr/share/polkit-1/rules.d
abr 16 14:07:32 turing polkitd[481]: Finished loading, compiling and executing 1 rules
abr 16 14:07:32 turing dbus[431]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
abr 16 14:07:32 turing systemd[1]: Started Authorization Manager.
abr 16 14:07:32 turing polkitd[481]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
abr 16 14:07:32 turing kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
abr 16 14:07:32 turing kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
abr 16 14:07:32 turing kernel: IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
abr 16 14:07:32 turing NetworkManager[435]: <info>  [1492344452.1829] sup-iface[0x209c6f0,wlp3s0]: supports 5 scan SSIDs
abr 16 14:07:32 turing NetworkManager[435]: <info>  [1492344452.1837] device (wlp3s0): supplicant interface state: starting -> ready
abr 16 14:07:32 turing NetworkManager[435]: <info>  [1492344452.1837] manager: startup complete
abr 16 14:07:32 turing NetworkManager[435]: <info>  [1492344452.1839] device (wlp3s0): state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
abr 16 14:07:32 turing kernel: IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
abr 16 14:07:32 turing kernel: nvidia-modeset: Allocated GPU:0 (GPU-f7e75862-99d4-6c67-bf95-c0f71e28de08) @ PCI:0000:01:00.0
abr 16 14:07:32 turing kernel: nvidia-modeset: Freed GPU:0 (GPU-f7e75862-99d4-6c67-bf95-c0f71e28de08) @ PCI:0000:01:00.0
abr 16 14:07:33 turing sddm[462]: Running display setup script  "/usr/share/sddm/scripts/Xsetup"
abr 16 14:07:33 turing sddm[462]: Display server started.
abr 16 14:07:33 turing sddm[462]: Socket server starting...
abr 16 14:07:33 turing sddm[462]: Socket server started.
abr 16 14:07:33 turing sddm[462]: Greeter starting...
abr 16 14:07:33 turing sddm[462]: Adding cookie to "/var/run/sddm/{51dfbf2e-66d4-4b32-8f2d-773330edac34}"
abr 16 14:07:33 turing sddm-helper[494]: [PAM] Starting...
abr 16 14:07:33 turing sddm-helper[494]: [PAM] Authenticating...
abr 16 14:07:33 turing sddm-helper[494]: [PAM] returning.
abr 16 14:07:33 turing sddm-helper[494]: pam_unix(sddm-greeter:session): session opened for user sddm by (uid=0)
abr 16 14:07:33 turing systemd[1]: Created slice User Slice of sddm.
abr 16 14:07:33 turing systemd[1]: Starting User Manager for UID 996...
abr 16 14:07:33 turing systemd-logind[429]: New session c1 of user sddm.
abr 16 14:07:33 turing systemd[1]: Started Session c1 of user sddm.
abr 16 14:07:33 turing systemd[496]: pam_unix(systemd-user:session): session opened for user sddm by (uid=0)
abr 16 14:07:33 turing systemd[496]: Reached target Paths.
abr 16 14:07:33 turing systemd[496]: Listening on Sound System.
abr 16 14:07:33 turing systemd[496]: Reached target Timers.
abr 16 14:07:33 turing systemd[496]: Starting D-Bus User Message Bus Socket.
abr 16 14:07:33 turing systemd[496]: Listening on D-Bus User Message Bus Socket.
abr 16 14:07:33 turing systemd[496]: Reached target Sockets.
abr 16 14:07:33 turing systemd[496]: Reached target Basic System.
abr 16 14:07:33 turing systemd[496]: Reached target Default.
abr 16 14:07:33 turing systemd[496]: Startup finished in 27ms.
abr 16 14:07:33 turing systemd[1]: Started User Manager for UID 996.
abr 16 14:07:33 turing sddm[462]: Greeter session started successfully
abr 16 14:07:33 turing sddm-greeter[501]: Reading from "/usr/share/xsessions/plasma.desktop"
abr 16 14:07:33 turing sddm-greeter[501]: inotify_add_watch("/usr/share/wayland-sessions") failed: "No such file or directory"
abr 16 14:07:33 turing sddm-greeter[501]: Connected to the daemon.
abr 16 14:07:33 turing sddm[462]: Message received from greeter: Connect
abr 16 14:07:33 turing sddm-greeter[501]: Loading qrc:/theme/Main.qml...
abr 16 14:07:33 turing sddm-greeter[501]: Adding view for ":0.0" QRect(0,0 640x480)
abr 16 14:07:33 turing systemd[496]: Started D-Bus User Message Bus.
abr 16 14:07:33 turing sddm-greeter[501]: QXcbConnection: XCB error: 148 (Unknown), sequence: 175, resource id: 0, major code: 140 (Unknown), minor code: 20
abr 16 14:07:33 turing sddm-greeter[501]: Message received from daemon: Capabilities
abr 16 14:07:33 turing sddm-greeter[501]: Message received from daemon: HostName
abr 16 14:07:35 turing NetworkManager[435]: <info>  [1492344455.7871] device (wlp3s0): supplicant interface state: ready -> inactive
abr 16 14:07:44 turing systemd[1]: Started Getty on tty5.
abr 16 14:07:47 turing login[520]: pam_unix(login:session): session opened for user carlos by LOGIN(uid=0)
abr 16 14:07:48 turing systemd[1]: Created slice User Slice of carlos.
abr 16 14:07:48 turing NetworkManager[435]: <info>  [1492344468.0008] policy: auto-activating connection 'ONOD298'
abr 16 14:07:48 turing systemd[1]: Starting User Manager for UID 1000...
abr 16 14:07:48 turing NetworkManager[435]: <info>  [1492344468.0020] device (wlp3s0): Activation: starting connection 'ONOD298' (ff8ef167-f32a-4053-8431-baa391f1f8ca)
abr 16 14:07:48 turing NetworkManager[435]: <info>  [1492344468.0025] device (wlp3s0): state change: disconnected -> prepare (reason 'none') [30 40 0]
abr 16 14:07:48 turing NetworkManager[435]: <info>  [1492344468.0026] manager: NetworkManager state is now CONNECTING
abr 16 14:07:48 turing systemd-logind[429]: New session c2 of user carlos.
abr 16 14:07:48 turing systemd[1]: Started Session c2 of user carlos.
abr 16 14:07:48 turing systemd[523]: pam_unix(systemd-user:session): session opened for user carlos by (uid=0)
abr 16 14:07:48 turing NetworkManager[435]: <info>  [1492344468.0089] device (wlp3s0): set-hw-addr: set-cloned MAC address to A4:02:B9:35:1F:56 (permanent)
abr 16 14:07:48 turing kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
abr 16 14:07:48 turing kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
abr 16 14:07:48 turing systemd[523]: Reached target Paths.
abr 16 14:07:48 turing kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
abr 16 14:07:48 turing kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
abr 16 14:07:48 turing kernel: IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
abr 16 14:07:48 turing login[520]: LOGIN ON tty5 BY carlos
abr 16 14:07:48 turing systemd[523]: Starting D-Bus User Message Bus Socket.
abr 16 14:07:48 turing kernel: IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
abr 16 14:07:48 turing systemd[523]: Reached target Timers.
abr 16 14:07:48 turing systemd[523]: Listening on Sound System.
abr 16 14:07:48 turing systemd[523]: Listening on D-Bus User Message Bus Socket.
abr 16 14:07:48 turing kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
abr 16 14:07:48 turing kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
abr 16 14:07:48 turing systemd[523]: Reached target Sockets.
abr 16 14:07:48 turing systemd[523]: Reached target Basic System.
abr 16 14:07:48 turing systemd[523]: Reached target Default.
abr 16 14:07:48 turing systemd[523]: Startup finished in 12ms.
abr 16 14:07:48 turing systemd[1]: Started User Manager for UID 1000.
abr 16 14:07:48 turing NetworkManager[435]: <info>  [1492344468.1004] device (wlp3s0): supplicant interface state: inactive -> disabled
abr 16 14:07:48 turing NetworkManager[435]: <info>  [1492344468.1009] device (wlp3s0): state change: prepare -> config (reason 'none') [40 50 0]
abr 16 14:07:48 turing NetworkManager[435]: <info>  [1492344468.1013] device (wlp3s0): Activation: (wifi) access point 'ONOD298' has security, but secrets are required.
abr 16 14:07:48 turing NetworkManager[435]: <info>  [1492344468.1013] device (wlp3s0): state change: config -> need-auth (reason 'none') [50 60 0]
abr 16 14:07:48 turing NetworkManager[435]: <warn>  [1492344468.1052] device (wlp3s0): No agents were available for this request.
abr 16 14:07:48 turing NetworkManager[435]: <info>  [1492344468.1052] device (wlp3s0): state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
abr 16 14:07:48 turing NetworkManager[435]: <info>  [1492344468.1055] manager: NetworkManager state is now DISCONNECTED
abr 16 14:07:48 turing NetworkManager[435]: <warn>  [1492344468.1062] device (wlp3s0): Activation: failed for connection 'ONOD298'
abr 16 14:07:48 turing NetworkManager[435]: <info>  [1492344468.1074] device (wlp3s0): state change: failed -> disconnected (reason 'none') [120 30 0]
abr 16 14:07:48 turing NetworkManager[435]: <info>  [1492344468.1133] device (wlp3s0): set-hw-addr: set MAC address to C6:0E:B6:C2:46:7B (scanning)
abr 16 14:07:48 turing kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
abr 16 14:07:48 turing kernel: iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
abr 16 14:07:48 turing NetworkManager[435]: <info>  [1492344468.2055] device (wlp3s0): supplicant interface state: disabled -> scanning
abr 16 14:07:48 turing kernel: IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
abr 16 14:07:51 turing NetworkManager[435]: <info>  [1492344471.7568] device (wlp3s0): supplicant interface state: scanning -> inactive
abr 16 14:08:26 turing NetworkManager[435]: <info>  [1492344506.1977] device (wlp3s0): supplicant interface state: inactive -> scanning

Lone_Wolf · 2017-04-16 15:21:24

forget sddm for now.

boot to multi-user target[1]
login as user, setup xinitrc[2]
run startx

post the ~/.xinitrc you created, lspci -k, and xorg log from this start.

[1] https://wiki.archlinux.org/index.php/Sy … _boot_into
[2]https://wiki.archlinux.org/index.php/Xinit

karlospv94 · 2017-04-16 18:05:33

Lone_Wolf wrote:

forget sddm for now.
boot to multi-user target[1]
login as user, setup xinitrc[2]
run startx
post the ~/.xinitrc you created, lspci -k, and xorg log from this start.
[1] https://wiki.archlinux.org/index.php/Sy … _boot_into
[2]https://wiki.archlinux.org/index.php/Xinit

Thanks for your response!

I have booted following your [1] suggestion but I have no idea what I must do reading reference [2]. So once logged in, I have executed "startx" assuming it will use the default xinitrc located at "/etc/X11/xinit/xinitrc" and here you have the corresponding logs:

~$ startx
X.Org X Server 1.19.3
Release Date: 2017-03-15
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.9.11-1-ARCH x86_64 
Current Operating System: Linux turing 4.10.9-1-ARCH #1 SMP PREEMPT Sat Apr 8 12:39:59 CEST 2017 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-linux systemd.unit=multi-user.target root=UUID=43ef0b61-66cc-4d35-ab56-694452acbce8 rw quiet
Build Date: 07 April 2017  05:42:48PM
 
Current version of pixman: 0.34.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 16 19:56:40 2017
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
/etc/X11/xinit/xinitrc: línea 51: twm: no se encontró la orden
/etc/X11/xinit/xinitrc: línea 52: xclock: no se encontró la orden
/etc/X11/xinit/xinitrc: línea 53: xterm: no se encontró la orden
/etc/X11/xinit/xinitrc: línea 55: exec: xterm: no se encontró
/etc/X11/xinit/xinitrc: línea 54: xterm: no se encontró la orden
xinit: connection to X server lost

waiting for X server to shut down (II) Server terminated successfully (0). Closing log file.

~$ cat /var/log/Xorg.0.log
[    38.542] 
X.Org X Server 1.19.3
Release Date: 2017-03-15
[    38.542] X Protocol Version 11, Revision 0
[    38.542] Build Operating System: Linux 4.9.11-1-ARCH x86_64 
[    38.542] Current Operating System: Linux turing 4.10.9-1-ARCH #1 SMP PREEMPT Sat Apr 8 12:39:59 CEST 2017 x86_64
[    38.543] Kernel command line: BOOT_IMAGE=/vmlinuz-linux systemd.unit=multi-user.target root=UUID=43ef0b61-66cc-4d35-ab56-694452acbce8 rw quiet
[    38.543] Build Date: 07 April 2017  05:42:48PM
[    38.543]  
[    38.543] Current version of pixman: 0.34.0
[    38.543] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    38.543] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    38.544] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 16 19:52:52 2017
[    38.551] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    38.551] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    38.553] (==) No Layout section.  Using the first Screen section.
[    38.553] (==) No screen section available. Using defaults.
[    38.553] (**) |-->Screen "Default Screen Section" (0)
[    38.553] (**) |   |-->Monitor "<default monitor>"
[    38.553] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    38.553] (==) Automatically adding devices
[    38.553] (==) Automatically enabling devices
[    38.553] (==) Automatically adding GPU devices
[    38.553] (==) Automatically binding GPU devices
[    38.553] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    38.567] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    38.567] 	Entry deleted from font path.
[    38.567] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    38.567] 	Entry deleted from font path.
[    38.567] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    38.567] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    38.568] 	Entry deleted from font path.
[    38.568] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    38.568] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[    38.568] (==) ModulePath set to "/usr/lib/xorg/modules"
[    38.568] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    38.568] (II) Loader magic: 0x822d60
[    38.568] (II) Module ABI versions:
[    38.568] 	X.Org ANSI C Emulation: 0.4
[    38.568] 	X.Org Video Driver: 23.0
[    38.568] 	X.Org XInput driver : 24.1
[    38.568] 	X.Org Server Extension : 10.0
[    38.569] (++) using VT number 1

[    38.569] (--) controlling tty is VT number 1, auto-enabling KeepTty
[    38.573] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[    38.574] (II) xfree86: Adding drm device (/dev/dri/card1)
[    38.575] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 11 paused 0
[    38.575] (II) xfree86: Adding drm device (/dev/dri/card0)
[    38.576] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[    38.578] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules"
[    38.579] (**) OutputClass "nvidia" setting /dev/dri/card1 as PrimaryGPU
[    38.580] (--) PCI: (0:0:2:0) 8086:191b:1043:1080 rev 6, Mem @ 0xdb000000/16777216, 0x70000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    38.580] (--) PCI:*(0:1:0:0) 10de:139b:1043:1080 rev 162, Mem @ 0xdc000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    38.580] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    38.581] (II) LoadModule: "glx"
[    38.581] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[    38.770] (II) Module glx: vendor="NVIDIA Corporation"
[    38.770] 	compiled for 4.0.2, module version = 1.0.0
[    38.770] 	Module class: X.Org Server Extension
[    38.772] (II) NVIDIA GLX Module  378.13  Tue Feb  7 18:25:34 PST 2017
[    38.773] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[    38.773] 	loading driver: nvidia
[    38.773] (II) Applying OutputClass "intel" to /dev/dri/card0
[    38.773] 	loading driver: modesetting
[    38.773] (==) Matched nvidia as autoconfigured driver 0
[    38.773] (==) Matched nouveau as autoconfigured driver 1
[    38.773] (==) Matched nv as autoconfigured driver 2
[    38.773] (==) Matched modesetting as autoconfigured driver 3
[    38.773] (==) Matched intel as autoconfigured driver 4
[    38.773] (==) Matched nouveau as autoconfigured driver 5
[    38.773] (==) Matched nv as autoconfigured driver 6
[    38.773] (==) Matched modesetting as autoconfigured driver 7
[    38.773] (==) Matched fbdev as autoconfigured driver 8
[    38.773] (==) Matched vesa as autoconfigured driver 9
[    38.773] (==) Assigned the driver to the xf86ConfigLayout
[    38.773] (II) LoadModule: "nvidia"
[    38.797] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    38.804] (II) Module nvidia: vendor="NVIDIA Corporation"
[    38.804] 	compiled for 4.0.2, module version = 1.0.0
[    38.804] 	Module class: X.Org Video Driver
[    38.805] (II) LoadModule: "nouveau"
[    38.811] (WW) Warning, couldn't open module nouveau
[    38.811] (II) UnloadModule: "nouveau"
[    38.811] (II) Unloading nouveau
[    38.811] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    38.811] (II) LoadModule: "nv"
[    38.811] (WW) Warning, couldn't open module nv
[    38.811] (II) UnloadModule: "nv"
[    38.811] (II) Unloading nv
[    38.812] (EE) Failed to load module "nv" (module does not exist, 0)
[    38.812] (II) LoadModule: "modesetting"
[    38.812] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    38.813] (II) Module modesetting: vendor="X.Org Foundation"
[    38.813] 	compiled for 1.19.3, module version = 1.19.3
[    38.813] 	Module class: X.Org Video Driver
[    38.813] 	ABI class: X.Org Video Driver, version 23.0
[    38.813] (II) LoadModule: "intel"
[    38.813] (WW) Warning, couldn't open module intel
[    38.813] (II) UnloadModule: "intel"
[    38.813] (II) Unloading intel
[    38.813] (EE) Failed to load module "intel" (module does not exist, 0)
[    38.813] (II) LoadModule: "fbdev"
[    38.814] (WW) Warning, couldn't open module fbdev
[    38.814] (II) UnloadModule: "fbdev"
[    38.814] (II) Unloading fbdev
[    38.814] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    38.814] (II) LoadModule: "vesa"
[    38.814] (WW) Warning, couldn't open module vesa
[    38.814] (II) UnloadModule: "vesa"
[    38.814] (II) Unloading vesa
[    38.814] (EE) Failed to load module "vesa" (module does not exist, 0)
[    38.814] (II) NVIDIA dlloader X Driver  378.13  Tue Feb  7 18:01:51 PST 2017
[    38.814] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    38.814] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    38.815] (II) systemd-logind: releasing fd for 226:1
[    38.816] (II) Loading sub module "fb"
[    38.816] (II) LoadModule: "fb"
[    38.816] (II) Loading /usr/lib/xorg/modules/libfb.so
[    38.818] (II) Module fb: vendor="X.Org Foundation"
[    38.818] 	compiled for 1.19.3, module version = 1.0.0
[    38.818] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    38.818] (II) Loading sub module "wfb"
[    38.818] (II) LoadModule: "wfb"
[    38.818] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    38.819] (II) Module wfb: vendor="X.Org Foundation"
[    38.819] 	compiled for 1.19.3, module version = 1.0.0
[    38.819] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    38.819] (II) Loading sub module "ramdac"
[    38.819] (II) LoadModule: "ramdac"
[    38.820] (II) Module "ramdac" already built-in
[    38.822] (WW) Falling back to old probe method for modesetting
[    38.822] (II) modeset(G0): using drv /dev/dri/card0
[    38.822] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    38.822] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    38.822] (==) NVIDIA(0): RGB weight 888
[    38.822] (==) NVIDIA(0): Default visual is TrueColor
[    38.822] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    38.823] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[    38.823] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[    38.823] (**) NVIDIA(0): Enabling 2D acceleration
[    39.058] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 960M (GM107-A) at PCI:1:0:0 (GPU-0)
[    39.058] (--) NVIDIA(0): Memory: 2097152 kBytes
[    39.058] (--) NVIDIA(0): VideoBIOS: 82.07.94.00.1a
[    39.058] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    39.058] (II) NVIDIA(0): Validated MetaModes:
[    39.058] (II) NVIDIA(0):     "NULL"
[    39.058] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[    39.058] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[    39.058] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    39.058] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[    39.058] (==) modeset(G0): RGB weight 888
[    39.058] (==) modeset(G0): Default visual is TrueColor
[    39.058] (II) Loading sub module "glamoregl"
[    39.058] (II) LoadModule: "glamoregl"
[    39.058] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    39.066] (II) Module glamoregl: vendor="X.Org Foundation"
[    39.066] 	compiled for 1.19.3, module version = 1.0.0
[    39.066] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    39.066] (II) glamor: OpenGL accelerated X.org driver based.
[    39.144] (II) glamor: EGL version 1.4 (DRI2):
[    39.167] (II) modeset(G0): glamor initialized
[    39.168] (II) modeset(G0): Output eDP-1-1 has no monitor section
[    39.170] (II) modeset(G0): Output DP-1-1 has no monitor section
[    39.179] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[    39.181] (II) modeset(G0): Output DP-1-2 has no monitor section
[    39.182] (II) modeset(G0): EDID for output eDP-1-1
[    39.182] (II) modeset(G0): Manufacturer: SDC  Model: 324c  Serial#: 0
[    39.182] (II) modeset(G0): Year: 2013  Week: 0
[    39.182] (II) modeset(G0): EDID Version: 1.4
[    39.182] (II) modeset(G0): Digital Display Input
[    39.182] (II) modeset(G0): 6 bits per channel
[    39.182] (II) modeset(G0): Digital interface is DisplayPort
[    39.182] (II) modeset(G0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    39.182] (II) modeset(G0): Gamma: 2.20
[    39.182] (II) modeset(G0): No DPMS capabilities specified
[    39.182] (II) modeset(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    39.182] (II) modeset(G0): First detailed timing is preferred mode
[    39.182] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[    39.182] (II) modeset(G0): redX: 0.620 redY: 0.355   greenX: 0.300 greenY: 0.580
[    39.182] (II) modeset(G0): blueX: 0.150 blueY: 0.090   whiteX: 0.313 whiteY: 0.329
[    39.182] (II) modeset(G0): Manufacturer's mask: 0
[    39.182] (II) modeset(G0): Supported detailed timing:
[    39.182] (II) modeset(G0): clock: 143.0 MHz   Image Size:  344 x 194 mm
[    39.182] (II) modeset(G0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    39.182] (II) modeset(G0): v_active: 1080  v_sync: 1082  v_sync_end 1087 v_blanking: 1144 v_border: 0
[    39.183] (II) modeset(G0): Unknown vendor-specific block f
[    39.183] (II) modeset(G0):  SAMSUNG
[    39.183] (II) modeset(G0):  156HL01-104
[    39.183] (II) modeset(G0): EDID (in hex):
[    39.183] (II) modeset(G0): 	00ffffffffffff004c834c3200000000
[    39.183] (II) modeset(G0): 	00170104952213780ace859e5b4c9426
[    39.183] (II) modeset(G0): 	17505400000001010101010101010101
[    39.183] (II) modeset(G0): 	010101010101dc3780a0703840403020
[    39.183] (II) modeset(G0): 	250058c2100000190000000f00000000
[    39.183] (II) modeset(G0): 	00000000001e82105200000000fe0053
[    39.183] (II) modeset(G0): 	414d53554e470a2020202020000000fe
[    39.183] (II) modeset(G0): 	00313536484c30312d3130340a2000cf
[    39.183] (II) modeset(G0): Printing probed modes for output eDP-1-1
[    39.183] (II) modeset(G0): Modeline "1920x1080"x60.1  143.00  1920 1968 2000 2080  1080 1082 1087 1144 -hsync -vsync (68.8 kHz eP)
[    39.183] (II) modeset(G0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    39.183] (II) modeset(G0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    39.183] (II) modeset(G0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    39.183] (II) modeset(G0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    39.183] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    39.183] (II) modeset(G0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    39.183] (II) modeset(G0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    39.183] (II) modeset(G0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    39.183] (II) modeset(G0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    39.183] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    39.183] (II) modeset(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    39.183] (II) modeset(G0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    39.183] (II) modeset(G0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    39.183] (II) modeset(G0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    39.183] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    39.183] (II) modeset(G0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    39.183] (II) modeset(G0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    39.183] (II) modeset(G0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    39.183] (II) modeset(G0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    39.185] (II) modeset(G0): EDID for output DP-1-1
[    39.195] (II) modeset(G0): EDID for output HDMI-1-1
[    39.197] (II) modeset(G0): EDID for output DP-1-2
[    39.197] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[    39.197] (==) modeset(G0): DPI set to (96, 96)
[    39.197] (II) Loading sub module "fb"
[    39.197] (II) LoadModule: "fb"
[    39.197] (II) Loading /usr/lib/xorg/modules/libfb.so
[    39.197] (II) Module fb: vendor="X.Org Foundation"
[    39.197] 	compiled for 1.19.3, module version = 1.0.0
[    39.197] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    39.197] (--) Depth 24 pixmap format is 32 bpp
[    39.283] (==) modeset(G0): Backing store enabled
[    39.283] (==) modeset(G0): Silken mouse enabled
[    39.284] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    39.284] (==) modeset(G0): DPMS enabled
[    39.284] (II) modeset(G0): [DRI2] Setup complete
[    39.284] (II) modeset(G0): [DRI2]   DRI driver: i965
[    39.284] (II) modeset(G0): [DRI2]   VDPAU driver: i965
[    39.284] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[    39.284] (II) NVIDIA:     access.
[    39.287] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    39.287] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    39.287] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    39.287] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    39.287] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    39.287] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    39.287] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    39.287] (II) NVIDIA(0):     Config Options in the README.
[    39.310] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[    39.310] (II) NVIDIA(0): Setting mode "NULL"
[    39.314] (==) NVIDIA(0): Disabling shared memory pixmaps
[    39.314] (==) NVIDIA(0): Backing store enabled
[    39.314] (==) NVIDIA(0): Silken mouse enabled
[    39.314] (==) NVIDIA(0): DPMS enabled
[    39.314] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[    39.314] (II) Loading sub module "dri2"
[    39.314] (II) LoadModule: "dri2"
[    39.314] (II) Module "dri2" already built-in
[    39.314] (II) NVIDIA(0): [DRI2] Setup complete
[    39.314] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    39.315] (--) RandR disabled
[    39.317] (II) Initializing extension GLX
[    39.317] (II) Indirect GLX disabled.
[    39.599] (II) modeset(G0): Damage tracking initialized
[    39.705] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    39.705] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    39.705] (**) Power Button: Applying InputClass "system-keyboard"
[    39.705] (II) LoadModule: "libinput"
[    39.705] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    39.711] (II) Module libinput: vendor="X.Org Foundation"
[    39.711] 	compiled for 1.19.2, module version = 0.25.0
[    39.711] 	Module class: X.Org XInput Driver
[    39.711] 	ABI class: X.Org XInput driver, version 24.1
[    39.711] (II) Using input driver 'libinput' for 'Power Button'
[    39.712] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 38 paused 0
[    39.712] (**) Power Button: always reports core events
[    39.712] (**) Option "Device" "/dev/input/event3"
[    39.712] (**) Option "_source" "server/udev"
[    39.713] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    39.713] (II) event3  - (II) Power Button: (II) device is a keyboard
[    39.713] (II) event3  - (II) Power Button: (II) device removed
[    39.713] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    39.713] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    39.713] (**) Option "xkb_layout" "es"
[    39.727] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    39.727] (II) event3  - (II) Power Button: (II) device is a keyboard
[    39.728] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event4)
[    39.728] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[    39.728] (**) Asus Wireless Radio Control: Applying InputClass "system-keyboard"
[    39.728] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[    39.728] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 41 paused 0
[    39.728] (**) Asus Wireless Radio Control: always reports core events
[    39.728] (**) Option "Device" "/dev/input/event4"
[    39.728] (**) Option "_source" "server/udev"
[    39.728] (II) event4  - (II) Asus Wireless Radio Control: (II) is tagged by udev as: Keyboard
[    39.728] (II) event4  - (II) Asus Wireless Radio Control: (II) device is a keyboard
[    39.728] (II) event4  - (II) Asus Wireless Radio Control: (II) device removed
[    39.728] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input4/event4"
[    39.728] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[    39.728] (**) Option "xkb_layout" "es"
[    39.728] (II) event4  - (II) Asus Wireless Radio Control: (II) is tagged by udev as: Keyboard
[    39.728] (II) event4  - (II) Asus Wireless Radio Control: (II) device is a keyboard
[    39.729] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    39.729] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    39.729] (**) Video Bus: Applying InputClass "system-keyboard"
[    39.729] (II) Using input driver 'libinput' for 'Video Bus'
[    39.729] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 42 paused 0
[    39.729] (**) Video Bus: always reports core events
[    39.729] (**) Option "Device" "/dev/input/event7"
[    39.729] (**) Option "_source" "server/udev"
[    39.729] (II) event7  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    39.729] (II) event7  - (II) Video Bus: (II) device is a keyboard
[    39.729] (II) event7  - (II) Video Bus: (II) device removed
[    39.729] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event7"
[    39.729] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    39.729] (**) Option "xkb_layout" "es"
[    39.729] (II) event7  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    39.729] (II) event7  - (II) Video Bus: (II) device is a keyboard
[    39.729] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    39.729] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    39.729] (**) Video Bus: Applying InputClass "system-keyboard"
[    39.729] (II) Using input driver 'libinput' for 'Video Bus'
[    39.730] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 43 paused 0
[    39.730] (**) Video Bus: always reports core events
[    39.730] (**) Option "Device" "/dev/input/event8"
[    39.730] (**) Option "_source" "server/udev"
[    39.730] (II) event8  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    39.730] (II) event8  - (II) Video Bus: (II) device is a keyboard
[    39.730] (II) event8  - (II) Video Bus: (II) device removed
[    39.730] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input8/event8"
[    39.730] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[    39.730] (**) Option "xkb_layout" "es"
[    39.730] (II) event8  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    39.730] (II) event8  - (II) Video Bus: (II) device is a keyboard
[    39.731] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    39.731] (II) No input driver specified, ignoring this device.
[    39.731] (II) This device may have been added with another device file.
[    39.731] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    39.731] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    39.731] (**) Sleep Button: Applying InputClass "system-keyboard"
[    39.731] (II) Using input driver 'libinput' for 'Sleep Button'
[    39.731] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 44 paused 0
[    39.731] (**) Sleep Button: always reports core events
[    39.731] (**) Option "Device" "/dev/input/event2"
[    39.731] (**) Option "_source" "server/udev"
[    39.731] (II) event2  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[    39.731] (II) event2  - (II) Sleep Button: (II) device is a keyboard
[    39.731] (II) event2  - (II) Sleep Button: (II) device removed
[    39.731] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[    39.731] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    39.731] (**) Option "xkb_layout" "es"
[    39.732] (II) event2  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[    39.732] (II) event2  - (II) Sleep Button: (II) device is a keyboard
[    39.732] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event14)
[    39.732] (**) USB2.0 HD UVC WebCam: Applying InputClass "libinput keyboard catchall"
[    39.732] (**) USB2.0 HD UVC WebCam: Applying InputClass "system-keyboard"
[    39.732] (II) Using input driver 'libinput' for 'USB2.0 HD UVC WebCam'
[    39.732] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 45 paused 0
[    39.732] (**) USB2.0 HD UVC WebCam: always reports core events
[    39.732] (**) Option "Device" "/dev/input/event14"
[    39.732] (**) Option "_source" "server/udev"
[    39.733] (II) event14 - (II) USB2.0 HD UVC WebCam: (II) is tagged by udev as: Keyboard
[    39.733] (II) event14 - (II) USB2.0 HD UVC WebCam: (II) device is a keyboard
[    39.733] (II) event14 - (II) USB2.0 HD UVC WebCam: (II) device removed
[    39.733] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input14/event14"
[    39.733] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 11)
[    39.733] (**) Option "xkb_layout" "es"
[    39.733] (II) event14 - (II) USB2.0 HD UVC WebCam: (II) is tagged by udev as: Keyboard
[    39.733] (II) event14 - (II) USB2.0 HD UVC WebCam: (II) device is a keyboard
[    39.733] (II) config/udev: Adding input device Logitech M325 (/dev/input/event15)
[    39.733] (**) Logitech M325: Applying InputClass "libinput pointer catchall"
[    39.733] (II) Using input driver 'libinput' for 'Logitech M325'
[    39.734] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 46 paused 0
[    39.734] (**) Logitech M325: always reports core events
[    39.734] (**) Option "Device" "/dev/input/event15"
[    39.734] (**) Option "_source" "server/udev"
[    39.734] (II) event15 - (II) Logitech M325: (II) is tagged by udev as: Mouse
[    39.734] (II) event15 - (II) Logitech M325: (II) device set to 600 DPI
[    39.734] (II) event15 - (II) Logitech M325: (II) device is a pointer
[    39.734] (II) event15 - (II) Logitech M325: (II) device removed
[    39.734] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.2/0003:046D:C52B.0003/0003:046D:400A.0005/input/input15/event15"
[    39.734] (II) XINPUT: Adding extended input device "Logitech M325" (type: MOUSE, id 12)
[    39.734] (**) Option "AccelerationScheme" "none"
[    39.734] (**) Logitech M325: (accel) selected scheme none/0
[    39.734] (**) Logitech M325: (accel) acceleration factor: 2.000
[    39.734] (**) Logitech M325: (accel) acceleration threshold: 4
[    39.734] (II) event15 - (II) Logitech M325: (II) is tagged by udev as: Mouse
[    39.734] (II) event15 - (II) Logitech M325: (II) device set to 600 DPI
[    39.734] (II) event15 - (II) Logitech M325: (II) device is a pointer
[    39.734] (II) config/udev: Adding input device Logitech M325 (/dev/input/mouse1)
[    39.734] (II) No input driver specified, ignoring this device.
[    39.734] (II) This device may have been added with another device file.
[    39.735] (II) config/udev: Adding input device Asus FTE TouchPad (/dev/input/event13)
[    39.735] (**) Asus FTE TouchPad: Applying InputClass "libinput touchpad catchall"
[    39.735] (**) Asus FTE TouchPad: Applying InputClass "Asus FTE TouchPad"
[    39.735] (II) Using input driver 'libinput' for 'Asus FTE TouchPad'
[    39.840] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 47 paused 0
[    39.841] (**) Asus FTE TouchPad: always reports core events
[    39.841] (**) Option "Device" "/dev/input/event13"
[    39.841] (**) Option "_source" "server/udev"
[    39.841] (II) event13 - (II) Asus FTE TouchPad: (II) is tagged by udev as: Touchpad
[    39.841] (II) event13 - (II) Asus FTE TouchPad: (II) no resolution or size hints, assuming a size of 69x50mm
[    39.841] (II) event13 - (II) Asus FTE TouchPad: (II) device is a atouchpad
[    39.842] (II) event13 - (II) Asus FTE TouchPad: (II) device removed
[    39.842] (**) Option "Tapping" "on"
[    39.842] (**) Option "TappingButtonMap" "lmr"
[    39.842] (**) Option "NaturalScrolling" "true"
[    39.842] (**) Option "ScrollMethod" "twofinger"
[    39.842] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-FTE1001:00/0018:0B05:0101.0004/input/input13/event13"
[    39.842] (II) XINPUT: Adding extended input device "Asus FTE TouchPad" (type: TOUCHPAD, id 13)
[    39.842] (**) Option "AccelerationScheme" "none"
[    39.842] (**) Asus FTE TouchPad: (accel) selected scheme none/0
[    39.842] (**) Asus FTE TouchPad: (accel) acceleration factor: 2.000
[    39.842] (**) Asus FTE TouchPad: (accel) acceleration threshold: 4
[    39.843] (II) event13 - (II) Asus FTE TouchPad: (II) is tagged by udev as: Touchpad
[    39.843] (II) event13 - (II) Asus FTE TouchPad: (II) no resolution or size hints, assuming a size of 69x50mm
[    39.843] (II) event13 - (II) Asus FTE TouchPad: (II) device is a atouchpad
[    39.844] (II) config/udev: Adding input device Asus FTE TouchPad (/dev/input/mouse0)
[    39.844] (**) Asus FTE TouchPad: Applying InputClass "Asus FTE TouchPad"
[    39.844] (II) Using input driver 'libinput' for 'Asus FTE TouchPad'
[    39.844] (**) Asus FTE TouchPad: always reports core events
[    39.844] (**) Option "Device" "/dev/input/mouse0"
[    39.844] (**) Option "_source" "server/udev"
[    39.886] (II) mouse0  - failed to create input device '/dev/input/mouse0'.
[    39.886] (EE) libinput: Asus FTE TouchPad: Failed to create a device for /dev/input/mouse0
[    39.886] (EE) PreInit returned 2 for "Asus FTE TouchPad"
[    39.886] (II) UnloadModule: "libinput"
[    39.887] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[    39.887] (II) No input driver specified, ignoring this device.
[    39.887] (II) This device may have been added with another device file.
[    39.888] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11)
[    39.888] (II) No input driver specified, ignoring this device.
[    39.888] (II) This device may have been added with another device file.
[    39.888] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event12)
[    39.888] (II) No input driver specified, ignoring this device.
[    39.888] (II) This device may have been added with another device file.
[    39.889] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event9)
[    39.889] (II) No input driver specified, ignoring this device.
[    39.889] (II) This device may have been added with another device file.
[    39.889] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event6)
[    39.889] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    39.889] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[    39.889] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[    39.891] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 48 paused 0
[    39.891] (**) Asus WMI hotkeys: always reports core events
[    39.891] (**) Option "Device" "/dev/input/event6"
[    39.891] (**) Option "_source" "server/udev"
[    39.891] (II) event6  - (II) Asus WMI hotkeys: (II) is tagged by udev as: Keyboard
[    39.891] (II) event6  - (II) Asus WMI hotkeys: (II) device is a keyboard
[    39.891] (II) event6  - (II) Asus WMI hotkeys: (II) device removed
[    39.891] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input6/event6"
[    39.891] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 14)
[    39.891] (**) Option "xkb_layout" "es"
[    39.892] (II) event6  - (II) Asus WMI hotkeys: (II) is tagged by udev as: Keyboard
[    39.892] (II) event6  - (II) Asus WMI hotkeys: (II) device is a keyboard
[    39.893] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    39.893] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    39.893] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[    39.893] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    39.894] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 49 paused 0
[    39.894] (**) AT Translated Set 2 keyboard: always reports core events
[    39.894] (**) Option "Device" "/dev/input/event0"
[    39.894] (**) Option "_source" "server/udev"
[    39.895] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[    39.895] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[    39.895] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[    39.895] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    39.895] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[    39.895] (**) Option "xkb_layout" "es"
[    39.896] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[    39.896] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[    39.897] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    39.897] (II) No input driver specified, ignoring this device.
[    39.897] (II) This device may have been added with another device file.
[    39.957] (**) Option "fd" "38"
[    39.957] (II) event3  - (II) Power Button: (II) device removed
[    39.957] (**) Option "fd" "41"
[    39.957] (II) event4  - (II) Asus Wireless Radio Control: (II) device removed
[    39.957] (**) Option "fd" "42"
[    39.957] (II) event7  - (II) Video Bus: (II) device removed
[    39.957] (**) Option "fd" "43"
[    39.957] (II) event8  - (II) Video Bus: (II) device removed
[    39.957] (**) Option "fd" "44"
[    39.957] (II) event2  - (II) Sleep Button: (II) device removed
[    39.957] (**) Option "fd" "45"
[    39.957] (II) event14 - (II) USB2.0 HD UVC WebCam: (II) device removed
[    39.958] (**) Option "fd" "46"
[    39.958] (II) event15 - (II) Logitech M325: (II) device removed
[    39.958] (**) Option "fd" "47"
[    39.958] (II) event13 - (II) Asus FTE TouchPad: (II) device removed
[    39.958] (**) Option "fd" "48"
[    39.958] (II) event6  - (II) Asus WMI hotkeys: (II) device removed
[    39.958] (**) Option "fd" "49"
[    39.958] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[    39.963] (II) UnloadModule: "libinput"
[    39.963] (II) systemd-logind: releasing fd for 13:64
[    40.023] (II) UnloadModule: "libinput"
[    40.023] (II) systemd-logind: releasing fd for 13:70
[    40.043] (II) UnloadModule: "libinput"
[    40.043] (II) systemd-logind: releasing fd for 13:77
[    40.083] (II) UnloadModule: "libinput"
[    40.083] (II) systemd-logind: releasing fd for 13:79
[    40.123] (II) UnloadModule: "libinput"
[    40.123] (II) systemd-logind: releasing fd for 13:78
[    40.163] (II) UnloadModule: "libinput"
[    40.163] (II) systemd-logind: releasing fd for 13:66
[    40.183] (II) UnloadModule: "libinput"
[    40.183] (II) systemd-logind: releasing fd for 13:72
[    40.203] (II) UnloadModule: "libinput"
[    40.203] (II) systemd-logind: releasing fd for 13:71
[    40.233] (II) UnloadModule: "libinput"
[    40.233] (II) systemd-logind: releasing fd for 13:68
[    40.254] (II) UnloadModule: "libinput"
[    40.254] (II) systemd-logind: releasing fd for 13:67
[    40.320] (II) NVIDIA(GPU-0): Deleting GPU-0
[    40.553] (II) Server terminated successfully (0). Closing log file.

~$ lspci -k
00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: skl_uncore
00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 07)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: i915
	Kernel modules: i915
00:04.0 Signal processing controller: Intel Corporation Skylake Processor Thermal Subsystem (rev 07)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: proc_thermal
	Kernel modules: processor_thermal_device
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device 201f
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: intel_pch_thermal
	Kernel modules: intel_pch_thermal
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO I2C Controller #0 (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci
00:15.1 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO I2C Controller #1 (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: mei_me
	Kernel modules: mei_me
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: ahci
	Kernel modules: ahci
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #2 (rev f1)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #3 (rev f1)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #5 (rev f1)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device 1080
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device 1080
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 960M] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: nvidia
	Kernel modules: nouveau, nvidia_drm, nvidia
02:00.0 Unassigned class [ff00]: Alcor Micro Device 6621
	Subsystem: Alcor Micro Device 6621
03:00.0 Network controller: Intel Corporation Wireless 7265 (rev 59)
	Subsystem: Intel Corporation Dual Band Wireless-AC 7265
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi

loqs · 2017-04-16 18:21:30

KDE#Manual ( to start kde from xinitrc )
Code_of_conduct#Pasting_pictures_and_code

For non-English locale users: Please prepend LC_ALL=C to posted commands so that the output will be in English.

karlospv94 wrote:

I have no idea what I must do reading reference [2]

Xinit#xinitrc

This default xinitrc will start a basic environment with Twm, xorg-xclock and Xterm (assuming that the necessary packages are installed). Therefore, to start a different window manager or desktop environment, first create a copy of the default xinitrc in home directory:

Then, append desired commands. Remember, lines following a command using exec would be ignored.

emphasis added

karlospv94 · 2017-04-16 18:47:01

loqs wrote:

KDE#Manual ( to start kde from xinitrc )
Code_of_conduct#Pasting_pictures_and_code
For non-English locale users: Please prepend LC_ALL=C to posted commands so that the output will be in English.
karlospv94 wrote:
I have no idea what I must do reading reference [2]
Xinit#xinitrc
This default xinitrc will start a basic environment with Twm, xorg-xclock and Xterm (assuming that the necessary packages are installed). Therefore, to start a different window manager or desktop environment, first create a copy of the default xinitrc in home directory:
Then, append desired commands. Remember, lines following a command using exec would be ignored.
emphasis added

Okay, you are right!

I have done what you did and I have the following result:

~$ cat .xinitrc
exec startkde

~$ lspci -k
00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: skl_uncore
00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 07)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: i915
	Kernel modules: i915
00:04.0 Signal processing controller: Intel Corporation Skylake Processor Thermal Subsystem (rev 07)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: proc_thermal
	Kernel modules: processor_thermal_device
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device 201f
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: intel_pch_thermal
	Kernel modules: intel_pch_thermal
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO I2C Controller #0 (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci
00:15.1 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO I2C Controller #1 (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: intel-lpss
	Kernel modules: intel_lpss_pci
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: mei_me
	Kernel modules: mei_me
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: ahci
	Kernel modules: ahci
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #2 (rev f1)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #3 (rev f1)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #5 (rev f1)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device 1080
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device 1080
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 960M] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device 1080
	Kernel driver in use: nvidia
	Kernel modules: nouveau, nvidia_drm, nvidia
02:00.0 Unassigned class [ff00]: Alcor Micro Device 6621
	Subsystem: Alcor Micro Device 6621
03:00.0 Network controller: Intel Corporation Wireless 7265 (rev 59)
	Subsystem: Intel Corporation Dual Band Wireless-AC 7265
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi

~$ cat /var/log/Xorg.0.log
[    95.011] 
X.Org X Server 1.19.3
Release Date: 2017-03-15
[    95.014] X Protocol Version 11, Revision 0
[    95.015] Build Operating System: Linux 4.9.11-1-ARCH x86_64 
[    95.016] Current Operating System: Linux turing 4.10.9-1-ARCH #1 SMP PREEMPT Sat Apr 8 12:39:59 CEST 2017 x86_64
[    95.016] Kernel command line: BOOT_IMAGE=/vmlinuz-linux systemd.unit=multi-user.target root=UUID=43ef0b61-66cc-4d35-ab56-694452acbce8 rw quiet
[    95.018] Build Date: 07 April 2017  05:42:48PM
[    95.020]  
[    95.021] Current version of pixman: 0.34.0
[    95.024] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    95.024] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    95.028] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 16 20:40:45 2017
[    95.032] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    95.033] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    95.034] (==) No Layout section.  Using the first Screen section.
[    95.034] (==) No screen section available. Using defaults.
[    95.034] (**) |-->Screen "Default Screen Section" (0)
[    95.034] (**) |   |-->Monitor "<default monitor>"
[    95.035] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    95.035] (==) Automatically adding devices
[    95.035] (==) Automatically enabling devices
[    95.035] (==) Automatically adding GPU devices
[    95.035] (==) Automatically binding GPU devices
[    95.035] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    95.041] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    95.041] 	Entry deleted from font path.
[    95.041] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    95.041] 	Entry deleted from font path.
[    95.041] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    95.041] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    95.041] 	Entry deleted from font path.
[    95.041] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    95.041] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[    95.041] (==) ModulePath set to "/usr/lib/xorg/modules"
[    95.041] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    95.041] (II) Loader magic: 0x822d60
[    95.041] (II) Module ABI versions:
[    95.041] 	X.Org ANSI C Emulation: 0.4
[    95.041] 	X.Org Video Driver: 23.0
[    95.041] 	X.Org XInput driver : 24.1
[    95.041] 	X.Org Server Extension : 10.0
[    95.042] (++) using VT number 1

[    95.042] (--) controlling tty is VT number 1, auto-enabling KeepTty
[    95.044] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[    95.044] (II) xfree86: Adding drm device (/dev/dri/card1)
[    95.045] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 11 paused 0
[    95.045] (II) xfree86: Adding drm device (/dev/dri/card0)
[    95.045] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[    95.046] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules"
[    95.046] (**) OutputClass "nvidia" setting /dev/dri/card1 as PrimaryGPU
[    95.047] (--) PCI: (0:0:2:0) 8086:191b:1043:1080 rev 6, Mem @ 0xdb000000/16777216, 0x70000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    95.047] (--) PCI:*(0:1:0:0) 10de:139b:1043:1080 rev 162, Mem @ 0xdc000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    95.047] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    95.047] (II) LoadModule: "glx"
[    95.048] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[    95.165] (II) Module glx: vendor="NVIDIA Corporation"
[    95.165] 	compiled for 4.0.2, module version = 1.0.0
[    95.165] 	Module class: X.Org Server Extension
[    95.166] (II) NVIDIA GLX Module  378.13  Tue Feb  7 18:25:34 PST 2017
[    95.168] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[    95.168] 	loading driver: nvidia
[    95.168] (II) Applying OutputClass "intel" to /dev/dri/card0
[    95.168] 	loading driver: modesetting
[    95.168] (==) Matched nvidia as autoconfigured driver 0
[    95.168] (==) Matched nouveau as autoconfigured driver 1
[    95.168] (==) Matched nv as autoconfigured driver 2
[    95.168] (==) Matched modesetting as autoconfigured driver 3
[    95.168] (==) Matched intel as autoconfigured driver 4
[    95.168] (==) Matched nouveau as autoconfigured driver 5
[    95.168] (==) Matched nv as autoconfigured driver 6
[    95.168] (==) Matched modesetting as autoconfigured driver 7
[    95.168] (==) Matched fbdev as autoconfigured driver 8
[    95.168] (==) Matched vesa as autoconfigured driver 9
[    95.168] (==) Assigned the driver to the xf86ConfigLayout
[    95.168] (II) LoadModule: "nvidia"
[    95.183] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    95.190] (II) Module nvidia: vendor="NVIDIA Corporation"
[    95.190] 	compiled for 4.0.2, module version = 1.0.0
[    95.190] 	Module class: X.Org Video Driver
[    95.191] (II) LoadModule: "nouveau"
[    95.195] (WW) Warning, couldn't open module nouveau
[    95.195] (II) UnloadModule: "nouveau"
[    95.195] (II) Unloading nouveau
[    95.195] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    95.195] (II) LoadModule: "nv"
[    95.195] (WW) Warning, couldn't open module nv
[    95.195] (II) UnloadModule: "nv"
[    95.195] (II) Unloading nv
[    95.195] (EE) Failed to load module "nv" (module does not exist, 0)
[    95.195] (II) LoadModule: "modesetting"
[    95.195] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    95.196] (II) Module modesetting: vendor="X.Org Foundation"
[    95.196] 	compiled for 1.19.3, module version = 1.19.3
[    95.196] 	Module class: X.Org Video Driver
[    95.196] 	ABI class: X.Org Video Driver, version 23.0
[    95.196] (II) LoadModule: "intel"
[    95.197] (WW) Warning, couldn't open module intel
[    95.197] (II) UnloadModule: "intel"
[    95.197] (II) Unloading intel
[    95.197] (EE) Failed to load module "intel" (module does not exist, 0)
[    95.197] (II) LoadModule: "fbdev"
[    95.197] (WW) Warning, couldn't open module fbdev
[    95.197] (II) UnloadModule: "fbdev"
[    95.197] (II) Unloading fbdev
[    95.197] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    95.197] (II) LoadModule: "vesa"
[    95.197] (WW) Warning, couldn't open module vesa
[    95.197] (II) UnloadModule: "vesa"
[    95.197] (II) Unloading vesa
[    95.197] (EE) Failed to load module "vesa" (module does not exist, 0)
[    95.197] (II) NVIDIA dlloader X Driver  378.13  Tue Feb  7 18:01:51 PST 2017
[    95.197] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    95.198] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    95.198] (II) systemd-logind: releasing fd for 226:1
[    95.199] (II) Loading sub module "fb"
[    95.199] (II) LoadModule: "fb"
[    95.200] (II) Loading /usr/lib/xorg/modules/libfb.so
[    95.201] (II) Module fb: vendor="X.Org Foundation"
[    95.201] 	compiled for 1.19.3, module version = 1.0.0
[    95.201] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    95.201] (II) Loading sub module "wfb"
[    95.201] (II) LoadModule: "wfb"
[    95.201] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    95.203] (II) Module wfb: vendor="X.Org Foundation"
[    95.203] 	compiled for 1.19.3, module version = 1.0.0
[    95.203] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    95.203] (II) Loading sub module "ramdac"
[    95.203] (II) LoadModule: "ramdac"
[    95.203] (II) Module "ramdac" already built-in
[    95.205] (WW) Falling back to old probe method for modesetting
[    95.205] (II) modeset(G0): using drv /dev/dri/card0
[    95.205] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    95.205] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    95.205] (==) NVIDIA(0): RGB weight 888
[    95.205] (==) NVIDIA(0): Default visual is TrueColor
[    95.205] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    95.206] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[    95.206] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[    95.206] (**) NVIDIA(0): Enabling 2D acceleration
[    95.432] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 960M (GM107-A) at PCI:1:0:0 (GPU-0)
[    95.432] (--) NVIDIA(0): Memory: 2097152 kBytes
[    95.432] (--) NVIDIA(0): VideoBIOS: 82.07.94.00.1a
[    95.432] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    95.432] (II) NVIDIA(0): Validated MetaModes:
[    95.432] (II) NVIDIA(0):     "NULL"
[    95.432] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[    95.432] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[    95.432] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    95.432] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[    95.432] (==) modeset(G0): RGB weight 888
[    95.432] (==) modeset(G0): Default visual is TrueColor
[    95.432] (II) Loading sub module "glamoregl"
[    95.432] (II) LoadModule: "glamoregl"
[    95.432] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    95.440] (II) Module glamoregl: vendor="X.Org Foundation"
[    95.440] 	compiled for 1.19.3, module version = 1.0.0
[    95.440] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    95.440] (II) glamor: OpenGL accelerated X.org driver based.
[    95.505] (II) glamor: EGL version 1.4 (DRI2):
[    95.521] (II) modeset(G0): glamor initialized
[    95.522] (II) modeset(G0): Output eDP-1-1 has no monitor section
[    95.525] (II) modeset(G0): Output DP-1-1 has no monitor section
[    95.533] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[    95.535] (II) modeset(G0): Output DP-1-2 has no monitor section
[    95.537] (II) modeset(G0): EDID for output eDP-1-1
[    95.537] (II) modeset(G0): Manufacturer: SDC  Model: 324c  Serial#: 0
[    95.537] (II) modeset(G0): Year: 2013  Week: 0
[    95.537] (II) modeset(G0): EDID Version: 1.4
[    95.537] (II) modeset(G0): Digital Display Input
[    95.537] (II) modeset(G0): 6 bits per channel
[    95.537] (II) modeset(G0): Digital interface is DisplayPort
[    95.537] (II) modeset(G0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    95.537] (II) modeset(G0): Gamma: 2.20
[    95.537] (II) modeset(G0): No DPMS capabilities specified
[    95.537] (II) modeset(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    95.537] (II) modeset(G0): First detailed timing is preferred mode
[    95.537] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[    95.537] (II) modeset(G0): redX: 0.620 redY: 0.355   greenX: 0.300 greenY: 0.580
[    95.537] (II) modeset(G0): blueX: 0.150 blueY: 0.090   whiteX: 0.313 whiteY: 0.329
[    95.537] (II) modeset(G0): Manufacturer's mask: 0
[    95.537] (II) modeset(G0): Supported detailed timing:
[    95.537] (II) modeset(G0): clock: 143.0 MHz   Image Size:  344 x 194 mm
[    95.537] (II) modeset(G0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    95.537] (II) modeset(G0): v_active: 1080  v_sync: 1082  v_sync_end 1087 v_blanking: 1144 v_border: 0
[    95.537] (II) modeset(G0): Unknown vendor-specific block f
[    95.537] (II) modeset(G0):  SAMSUNG
[    95.537] (II) modeset(G0):  156HL01-104
[    95.537] (II) modeset(G0): EDID (in hex):
[    95.537] (II) modeset(G0): 	00ffffffffffff004c834c3200000000
[    95.537] (II) modeset(G0): 	00170104952213780ace859e5b4c9426
[    95.537] (II) modeset(G0): 	17505400000001010101010101010101
[    95.537] (II) modeset(G0): 	010101010101dc3780a0703840403020
[    95.537] (II) modeset(G0): 	250058c2100000190000000f00000000
[    95.537] (II) modeset(G0): 	00000000001e82105200000000fe0053
[    95.537] (II) modeset(G0): 	414d53554e470a2020202020000000fe
[    95.537] (II) modeset(G0): 	00313536484c30312d3130340a2000cf
[    95.537] (II) modeset(G0): Printing probed modes for output eDP-1-1
[    95.537] (II) modeset(G0): Modeline "1920x1080"x60.1  143.00  1920 1968 2000 2080  1080 1082 1087 1144 -hsync -vsync (68.8 kHz eP)
[    95.537] (II) modeset(G0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    95.537] (II) modeset(G0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    95.537] (II) modeset(G0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    95.537] (II) modeset(G0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    95.537] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    95.537] (II) modeset(G0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    95.537] (II) modeset(G0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    95.537] (II) modeset(G0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    95.537] (II) modeset(G0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    95.537] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    95.537] (II) modeset(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    95.537] (II) modeset(G0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    95.537] (II) modeset(G0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    95.537] (II) modeset(G0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    95.537] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    95.537] (II) modeset(G0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    95.537] (II) modeset(G0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    95.537] (II) modeset(G0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    95.537] (II) modeset(G0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    95.540] (II) modeset(G0): EDID for output DP-1-1
[    95.549] (II) modeset(G0): EDID for output HDMI-1-1
[    95.551] (II) modeset(G0): EDID for output DP-1-2
[    95.551] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[    95.551] (==) modeset(G0): DPI set to (96, 96)
[    95.551] (II) Loading sub module "fb"
[    95.551] (II) LoadModule: "fb"
[    95.551] (II) Loading /usr/lib/xorg/modules/libfb.so
[    95.551] (II) Module fb: vendor="X.Org Foundation"
[    95.551] 	compiled for 1.19.3, module version = 1.0.0
[    95.551] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    95.551] (--) Depth 24 pixmap format is 32 bpp
[    95.635] (==) modeset(G0): Backing store enabled
[    95.635] (==) modeset(G0): Silken mouse enabled
[    95.635] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    95.636] (==) modeset(G0): DPMS enabled
[    95.636] (II) modeset(G0): [DRI2] Setup complete
[    95.636] (II) modeset(G0): [DRI2]   DRI driver: i965
[    95.636] (II) modeset(G0): [DRI2]   VDPAU driver: i965
[    95.637] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[    95.637] (II) NVIDIA:     access.
[    95.642] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    95.642] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    95.642] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    95.642] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    95.642] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    95.642] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    95.642] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    95.642] (II) NVIDIA(0):     Config Options in the README.
[    95.662] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[    95.662] (II) NVIDIA(0): Setting mode "NULL"
[    95.665] (==) NVIDIA(0): Disabling shared memory pixmaps
[    95.665] (==) NVIDIA(0): Backing store enabled
[    95.665] (==) NVIDIA(0): Silken mouse enabled
[    95.665] (==) NVIDIA(0): DPMS enabled
[    95.665] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[    95.665] (II) Loading sub module "dri2"
[    95.665] (II) LoadModule: "dri2"
[    95.665] (II) Module "dri2" already built-in
[    95.665] (II) NVIDIA(0): [DRI2] Setup complete
[    95.665] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    95.665] (--) RandR disabled
[    95.668] (II) Initializing extension GLX
[    95.668] (II) Indirect GLX disabled.
[    95.947] (II) modeset(G0): Damage tracking initialized
[    96.072] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    96.072] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    96.072] (**) Power Button: Applying InputClass "system-keyboard"
[    96.072] (II) LoadModule: "libinput"
[    96.072] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    96.078] (II) Module libinput: vendor="X.Org Foundation"
[    96.078] 	compiled for 1.19.2, module version = 0.25.0
[    96.078] 	Module class: X.Org XInput Driver
[    96.078] 	ABI class: X.Org XInput driver, version 24.1
[    96.078] (II) Using input driver 'libinput' for 'Power Button'
[    96.080] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 38 paused 0
[    96.080] (**) Power Button: always reports core events
[    96.080] (**) Option "Device" "/dev/input/event3"
[    96.080] (**) Option "_source" "server/udev"
[    96.081] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    96.081] (II) event3  - (II) Power Button: (II) device is a keyboard
[    96.081] (II) event3  - (II) Power Button: (II) device removed
[    96.081] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    96.081] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    96.081] (**) Option "xkb_layout" "es"
[    96.098] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    96.098] (II) event3  - (II) Power Button: (II) device is a keyboard
[    96.098] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event4)
[    96.098] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[    96.098] (**) Asus Wireless Radio Control: Applying InputClass "system-keyboard"
[    96.098] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[    96.098] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 41 paused 0
[    96.098] (**) Asus Wireless Radio Control: always reports core events
[    96.098] (**) Option "Device" "/dev/input/event4"
[    96.098] (**) Option "_source" "server/udev"
[    96.099] (II) event4  - (II) Asus Wireless Radio Control: (II) is tagged by udev as: Keyboard
[    96.099] (II) event4  - (II) Asus Wireless Radio Control: (II) device is a keyboard
[    96.099] (II) event4  - (II) Asus Wireless Radio Control: (II) device removed
[    96.099] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input4/event4"
[    96.099] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[    96.099] (**) Option "xkb_layout" "es"
[    96.099] (II) event4  - (II) Asus Wireless Radio Control: (II) is tagged by udev as: Keyboard
[    96.099] (II) event4  - (II) Asus Wireless Radio Control: (II) device is a keyboard
[    96.099] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    96.099] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    96.099] (**) Video Bus: Applying InputClass "system-keyboard"
[    96.099] (II) Using input driver 'libinput' for 'Video Bus'
[    96.099] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 42 paused 0
[    96.099] (**) Video Bus: always reports core events
[    96.099] (**) Option "Device" "/dev/input/event7"
[    96.099] (**) Option "_source" "server/udev"
[    96.100] (II) event7  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    96.100] (II) event7  - (II) Video Bus: (II) device is a keyboard
[    96.100] (II) event7  - (II) Video Bus: (II) device removed
[    96.100] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event7"
[    96.100] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    96.100] (**) Option "xkb_layout" "es"
[    96.100] (II) event7  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    96.100] (II) event7  - (II) Video Bus: (II) device is a keyboard
[    96.100] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    96.100] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    96.100] (**) Video Bus: Applying InputClass "system-keyboard"
[    96.100] (II) Using input driver 'libinput' for 'Video Bus'
[    96.100] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 43 paused 0
[    96.100] (**) Video Bus: always reports core events
[    96.100] (**) Option "Device" "/dev/input/event8"
[    96.100] (**) Option "_source" "server/udev"
[    96.101] (II) event8  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    96.101] (II) event8  - (II) Video Bus: (II) device is a keyboard
[    96.101] (II) event8  - (II) Video Bus: (II) device removed
[    96.101] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input8/event8"
[    96.101] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[    96.101] (**) Option "xkb_layout" "es"
[    96.101] (II) event8  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    96.101] (II) event8  - (II) Video Bus: (II) device is a keyboard
[    96.101] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    96.101] (II) No input driver specified, ignoring this device.
[    96.101] (II) This device may have been added with another device file.
[    96.101] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    96.101] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    96.101] (**) Sleep Button: Applying InputClass "system-keyboard"
[    96.101] (II) Using input driver 'libinput' for 'Sleep Button'
[    96.102] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 44 paused 0
[    96.102] (**) Sleep Button: always reports core events
[    96.102] (**) Option "Device" "/dev/input/event2"
[    96.102] (**) Option "_source" "server/udev"
[    96.102] (II) event2  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[    96.102] (II) event2  - (II) Sleep Button: (II) device is a keyboard
[    96.102] (II) event2  - (II) Sleep Button: (II) device removed
[    96.102] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[    96.102] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    96.102] (**) Option "xkb_layout" "es"
[    96.102] (II) event2  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[    96.102] (II) event2  - (II) Sleep Button: (II) device is a keyboard
[    96.102] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event9)
[    96.102] (**) USB2.0 HD UVC WebCam: Applying InputClass "libinput keyboard catchall"
[    96.102] (**) USB2.0 HD UVC WebCam: Applying InputClass "system-keyboard"
[    96.102] (II) Using input driver 'libinput' for 'USB2.0 HD UVC WebCam'
[    96.103] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 45 paused 0
[    96.103] (**) USB2.0 HD UVC WebCam: always reports core events
[    96.103] (**) Option "Device" "/dev/input/event9"
[    96.103] (**) Option "_source" "server/udev"
[    96.103] (II) event9  - (II) USB2.0 HD UVC WebCam: (II) is tagged by udev as: Keyboard
[    96.103] (II) event9  - (II) USB2.0 HD UVC WebCam: (II) device is a keyboard
[    96.103] (II) event9  - (II) USB2.0 HD UVC WebCam: (II) device removed
[    96.103] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input9/event9"
[    96.103] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 11)
[    96.103] (**) Option "xkb_layout" "es"
[    96.103] (II) event9  - (II) USB2.0 HD UVC WebCam: (II) is tagged by udev as: Keyboard
[    96.103] (II) event9  - (II) USB2.0 HD UVC WebCam: (II) device is a keyboard
[    96.104] (II) config/udev: Adding input device Logitech M325 (/dev/input/event14)
[    96.104] (**) Logitech M325: Applying InputClass "libinput pointer catchall"
[    96.104] (II) Using input driver 'libinput' for 'Logitech M325'
[    96.104] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 46 paused 0
[    96.104] (**) Logitech M325: always reports core events
[    96.104] (**) Option "Device" "/dev/input/event14"
[    96.104] (**) Option "_source" "server/udev"
[    96.104] (II) event14 - (II) Logitech M325: (II) is tagged by udev as: Mouse
[    96.104] (II) event14 - (II) Logitech M325: (II) device set to 600 DPI
[    96.104] (II) event14 - (II) Logitech M325: (II) device is a pointer
[    96.104] (II) event14 - (II) Logitech M325: (II) device removed
[    96.104] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.2/0003:046D:C52B.0003/0003:046D:400A.0004/input/input14/event14"
[    96.104] (II) XINPUT: Adding extended input device "Logitech M325" (type: MOUSE, id 12)
[    96.104] (**) Option "AccelerationScheme" "none"
[    96.104] (**) Logitech M325: (accel) selected scheme none/0
[    96.104] (**) Logitech M325: (accel) acceleration factor: 2.000
[    96.104] (**) Logitech M325: (accel) acceleration threshold: 4
[    96.105] (II) event14 - (II) Logitech M325: (II) is tagged by udev as: Mouse
[    96.105] (II) event14 - (II) Logitech M325: (II) device set to 600 DPI
[    96.105] (II) event14 - (II) Logitech M325: (II) device is a pointer
[    96.105] (II) config/udev: Adding input device Logitech M325 (/dev/input/mouse0)
[    96.105] (II) No input driver specified, ignoring this device.
[    96.105] (II) This device may have been added with another device file.
[    96.105] (II) config/udev: Adding input device Asus FTE TouchPad (/dev/input/event15)
[    96.105] (**) Asus FTE TouchPad: Applying InputClass "libinput touchpad catchall"
[    96.105] (**) Asus FTE TouchPad: Applying InputClass "Asus FTE TouchPad"
[    96.105] (II) Using input driver 'libinput' for 'Asus FTE TouchPad'
[    96.210] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 47 paused 0
[    96.210] (**) Asus FTE TouchPad: always reports core events
[    96.210] (**) Option "Device" "/dev/input/event15"
[    96.210] (**) Option "_source" "server/udev"
[    96.211] (II) event15 - (II) Asus FTE TouchPad: (II) is tagged by udev as: Touchpad
[    96.211] (II) event15 - (II) Asus FTE TouchPad: (II) no resolution or size hints, assuming a size of 69x50mm
[    96.211] (II) event15 - (II) Asus FTE TouchPad: (II) device is a atouchpad
[    96.211] (II) event15 - (II) Asus FTE TouchPad: (II) device removed
[    96.211] (**) Option "Tapping" "on"
[    96.211] (**) Option "TappingButtonMap" "lmr"
[    96.211] (**) Option "NaturalScrolling" "true"
[    96.211] (**) Option "ScrollMethod" "twofinger"
[    96.211] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-FTE1001:00/0018:0B05:0101.0005/input/input15/event15"
[    96.211] (II) XINPUT: Adding extended input device "Asus FTE TouchPad" (type: TOUCHPAD, id 13)
[    96.212] (**) Option "AccelerationScheme" "none"
[    96.212] (**) Asus FTE TouchPad: (accel) selected scheme none/0
[    96.212] (**) Asus FTE TouchPad: (accel) acceleration factor: 2.000
[    96.212] (**) Asus FTE TouchPad: (accel) acceleration threshold: 4
[    96.212] (II) event15 - (II) Asus FTE TouchPad: (II) is tagged by udev as: Touchpad
[    96.212] (II) event15 - (II) Asus FTE TouchPad: (II) no resolution or size hints, assuming a size of 69x50mm
[    96.212] (II) event15 - (II) Asus FTE TouchPad: (II) device is a atouchpad
[    96.213] (II) config/udev: Adding input device Asus FTE TouchPad (/dev/input/mouse1)
[    96.213] (**) Asus FTE TouchPad: Applying InputClass "Asus FTE TouchPad"
[    96.213] (II) Using input driver 'libinput' for 'Asus FTE TouchPad'
[    96.213] (**) Asus FTE TouchPad: always reports core events
[    96.213] (**) Option "Device" "/dev/input/mouse1"
[    96.213] (**) Option "_source" "server/udev"
[    96.256] (II) mouse1  - failed to create input device '/dev/input/mouse1'.
[    96.256] (EE) libinput: Asus FTE TouchPad: Failed to create a device for /dev/input/mouse1
[    96.256] (EE) PreInit returned 2 for "Asus FTE TouchPad"
[    96.256] (II) UnloadModule: "libinput"
[    96.257] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event10)
[    96.257] (II) No input driver specified, ignoring this device.
[    96.257] (II) This device may have been added with another device file.
[    96.258] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[    96.258] (II) No input driver specified, ignoring this device.
[    96.258] (II) This device may have been added with another device file.
[    96.258] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event12)
[    96.258] (II) No input driver specified, ignoring this device.
[    96.258] (II) This device may have been added with another device file.
[    96.259] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event13)
[    96.259] (II) No input driver specified, ignoring this device.
[    96.259] (II) This device may have been added with another device file.
[    96.259] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event6)
[    96.259] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    96.259] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[    96.259] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[    96.261] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 48 paused 0
[    96.261] (**) Asus WMI hotkeys: always reports core events
[    96.261] (**) Option "Device" "/dev/input/event6"
[    96.261] (**) Option "_source" "server/udev"
[    96.261] (II) event6  - (II) Asus WMI hotkeys: (II) is tagged by udev as: Keyboard
[    96.261] (II) event6  - (II) Asus WMI hotkeys: (II) device is a keyboard
[    96.261] (II) event6  - (II) Asus WMI hotkeys: (II) device removed
[    96.261] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input6/event6"
[    96.261] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 14)
[    96.261] (**) Option "xkb_layout" "es"
[    96.262] (II) event6  - (II) Asus WMI hotkeys: (II) is tagged by udev as: Keyboard
[    96.262] (II) event6  - (II) Asus WMI hotkeys: (II) device is a keyboard
[    96.263] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    96.263] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    96.263] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[    96.263] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    96.264] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 49 paused 0
[    96.264] (**) AT Translated Set 2 keyboard: always reports core events
[    96.265] (**) Option "Device" "/dev/input/event0"
[    96.265] (**) Option "_source" "server/udev"
[    96.265] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[    96.265] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[    96.265] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[    96.265] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    96.265] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[    96.265] (**) Option "xkb_layout" "es"
[    96.266] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[    96.266] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[    96.267] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    96.267] (II) No input driver specified, ignoring this device.
[    96.267] (II) This device may have been added with another device file.
[    98.218] randr: falling back to unsynchronized pixmap sharing

Now, I have started successfully the graphic session but the resolution has changed and I see all the screen fairly small. The laptop is an Asus Zenbook Pro

loqs · 2017-04-16 21:02:03

The system appears to use Hybrid_graphics have you configured NVIDIA_Optimus or Bumblebee?

karlospv94 · 2017-04-16 22:20:56

loqs wrote:

The system appears to use Hybrid_graphics have you configured NVIDIA_Optimus or Bumblebee?

No, I have not installed anything related to nvidia optimus or bumblebee

loqs · 2017-04-16 22:34:11

Unless your system firmware supports NVIDIA_Optimus#Disabling_switchable_graphics then you will need to configure one of those two options if you wish to use the Nvidia GPU.
If you just wish to use just the integrated GPU then remove all nvidia packages.

karlospv94 · 2017-04-17 10:36:42

loqs wrote:

Unless your system firmware supports NVIDIA_Optimus#Disabling_switchable_graphics then you will need to configure one of those two options if you wish to use the Nvidia GPU.
If you just wish to use just the integrated GPU then remove all nvidia packages.

I have finally removed nvidia and nvidia-utils and It works perfectly now, but I don't understand at all what is happening... I don't know if I am using now the GPU and why my computer works the same as before after removing nvidia packages.

Am I supposed to be using nouveau? Because I don't have the package installed but I see this in the logs:

~$ dmesg | grep nouveau                                                              
[    2.852004] nouveau: detected PR support, will not use DSM
[    2.852959] nouveau 0000:01:00.0: NVIDIA GM107 (1171b0a2)
[    2.890658] nouveau 0000:01:00.0: bios: version 82.07.94.00.1a
[    3.000433] nouveau 0000:01:00.0: fb: 2048 MiB GDDR5
[    3.000447] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 022554 [ IBUS ]
[    3.000501] nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1a40822c)
[    4.085916] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[    4.085917] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    4.085936] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
[    4.085962] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    4.085963] nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid
[    4.173136] nouveau 0000:01:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    4.240933] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[    4.240945] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[   10.328833] nouveau 0000:01:00.0: DRM: evicting buffers...
[   10.365910] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[   10.365931] nouveau 0000:01:00.0: DRM: suspending client object trees...
[   10.368953] nouveau 0000:01:00.0: DRM: suspending kernel object tree...

[Edit]

After rebooting again it arrives a moment which the screen freezes completely and I must force the shutdown

[Edit 2]

I have added nouveau to a blacklist and now It works perfectly, but sincerely, I don't know why... I don't understand why my computer works If I have not installed any kind of graphics driver like nouveau or nvidia and why It can execute things like webgl

Last edited by karlospv94 (2017-04-17 11:12:02)

V1del · 2017-04-17 11:17:24

xf86-video-nouveau is the Xorg nouveau driver, while what you see in dmesg is the kernel driver, these two are different things, read up on Xorg DDX if you want to know more, they have no bearing on the current issue however.

Simplified, Optimus setups work like this: By default the integrated intel card is what drives your desktop and general purpose computing tasks, this one is not as powerful as the nvidia card but uses less energy than the nvidia card. Your nvidia card is disabled during normal operation by the driver (as you see in the last lines of your dmesg output, the nouveau driver disables itself and the card, to save power) if you have tasks were you need more advanced graphic capabiliites like games or similar, you can enable the more powerful card and let it do the rendering work. While using nouveau, this is done with DRI_PRIME environment variable, if you do

DRI_PRIME=1 $program

your nvidia card will be activated and 3D acceleration tasks will be passed to the nvidia card. With the proprietary nvidia drivers the setup is slightly different which is why you have been linked to the bumblebee pages.

The end goal is the same: You want to use the power-saving intel card for most tasks and only enable the nvidia card for intensive applications.

If you don't want that (battery life isn't important to you/you are always plugged into the wall anyway/you don't suspend your laptop) but you always want the full power of nvidia graphics for everything, you should follow the other already linked Optimus article

karlospv94 · 2017-04-18 10:12:13

V1del wrote:

xf86-video-nouveau is the Xorg nouveau driver, while what you see in dmesg is the kernel driver, these two are different things, read up on Xorg DDX if you want to know more, they have no bearing on the current issue however.
Simplified, Optimus setups work like this: By default the integrated intel card is what drives your desktop and general purpose computing tasks, this one is not as powerful as the nvidia card but uses less energy than the nvidia card. Your nvidia card is disabled during normal operation by the driver (as you see in the last lines of your dmesg output, the nouveau driver disables itself and the card, to save power) if you have tasks were you need more advanced graphic capabiliites like games or similar, you can enable the more powerful card and let it do the rendering work. While using nouveau, this is done with DRI_PRIME environment variable, if you do
DRI_PRIME=1 $program
your nvidia card will be activated and 3D acceleration tasks will be passed to the nvidia card. With the proprietary nvidia drivers the setup is slightly different which is why you have been linked to the bumblebee pages.
The end goal is the same: You want to use the power-saving intel card for most tasks and only enable the nvidia card for intensive applications.
If you don't want that (battery life isn't important to you/you are always plugged into the wall anyway/you don't suspend your laptop) but you always want the full power of nvidia graphics for everything, you should follow the other already linked Optimus article

Okay, so I will test this wiki page: https://wiki.archlinux.org/index.php/NVIDIA_Optimus and will comment when finish. I will install nvidia again and will use the xorg.conf and xinitrc that they say

Last edited by karlospv94 (2017-04-18 10:22:19)

karlospv94 · 2017-04-19 13:18:17

I have installed xf86-video-nouveau in order to let nouveau manage the switching between the integrated Intel card and the Nvidia card.

The problem now is that I cannot poweroff my computer because it remains with a black screen.

Here is my logs:

➜ dmesg | grep nouveau                                                                                                                                                                                           
[    2.456877] nouveau: detected PR support, will not use DSM
[    2.457061] nouveau 0000:01:00.0: NVIDIA GM107 (1171b0a2)
[    2.487991] nouveau 0000:01:00.0: bios: version 82.07.94.00.1a
[    2.596490] nouveau 0000:01:00.0: fb: 2048 MiB GDDR5
[    2.596503] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 022554 [ IBUS ]
[    2.596556] nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1940822c)
[    3.683623] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[    3.683624] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    3.683626] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
[    3.683649] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    3.683651] nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid
[    3.773846] nouveau 0000:01:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    3.842399] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[    3.842414] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[    9.443385] nouveau 0000:01:00.0: DRM: evicting buffers...
[    9.453383] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
[    9.453403] nouveau 0000:01:00.0: DRM: suspending client object trees...
[    9.456236] nouveau 0000:01:00.0: DRM: suspending kernel object tree...

➜ less /var/log/Xorg.0.log
[     3.887] (--) Log file renamed from "/var/log/Xorg.pid-440.log" to "/var/log/Xorg.0.log"
[     3.891] 
X.Org X Server 1.19.3
Release Date: 2017-03-15
[     3.891] X Protocol Version 11, Revision 0
[     3.891] Build Operating System: Linux 4.9.11-1-ARCH x86_64 
[     3.891] Current Operating System: Linux turing 4.10.10-1-ARCH #1 SMP PREEMPT Wed Apr 12 18:50:28 CEST 2017 x86_64
[     3.891] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=43ef0b61-66cc-4d35-ab56-694452acbce8 rw quiet
[     3.891] Build Date: 07 April 2017  05:42:48PM
[     3.891]  
[     3.891] Current version of pixman: 0.34.0
[     3.891] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     3.891] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.891] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 19 15:08:55 2017
[     3.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     3.901] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     3.902] (==) No Layout section.  Using the first Screen section.
[     3.902] (==) No screen section available. Using defaults.
[     3.902] (**) |-->Screen "Default Screen Section" (0)
[     3.902] (**) |   |-->Monitor "<default monitor>"
[     3.902] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     3.902] (==) Automatically adding devices
[     3.902] (==) Automatically enabling devices
[     3.902] (==) Automatically adding GPU devices
[     3.902] (==) Automatically binding GPU devices
[     3.902] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     3.908] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[     3.908] 	Entry deleted from font path.
[     3.908] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[     3.908] 	Entry deleted from font path.
[     3.908] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[     3.908] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[     3.908] 	Entry deleted from font path.
[     3.908] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[     3.908] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[     3.908] (==) ModulePath set to "/usr/lib/xorg/modules"
[     3.908] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     3.909] (II) Loader magic: 0x822d60
[     3.909] (II) Module ABI versions:
[     3.909] 	X.Org ANSI C Emulation: 0.4
[     3.909] 	X.Org Video Driver: 23.0
[     3.909] 	X.Org XInput driver : 24.1
[     3.909] 	X.Org Server Extension : 10.0
[     3.910] (++) using VT number 1

[     3.910] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     3.910] (II) xfree86: Adding drm device (/dev/dri/card1)
[     3.910] (II) xfree86: Adding drm device (/dev/dri/card0)
[     3.923] (--) PCI:*(0:0:2:0) 8086:191b:1043:1080 rev 6, Mem @ 0xdb000000/16777216, 0x70000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[     3.923] (--) PCI: (0:1:0:0) 10de:139b:1043:1080 rev 162, Mem @ 0xdc000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[     3.923] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     3.925] (II) LoadModule: "glx"
[     3.942] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     3.963] (II) Module glx: vendor="X.Org Foundation"
[     3.963] 	compiled for 1.19.3, module version = 1.0.0
[     3.963] 	ABI class: X.Org Server Extension, version 10.0
[     3.963] (==) Matched intel as autoconfigured driver 0
[     3.963] (==) Matched nouveau as autoconfigured driver 1
[     3.963] (==) Matched nv as autoconfigured driver 2
[     3.963] (==) Matched intel as autoconfigured driver 3
[     3.963] (==) Matched modesetting as autoconfigured driver 4
[     3.963] (==) Matched fbdev as autoconfigured driver 5
[     3.963] (==) Matched vesa as autoconfigured driver 6
[     3.963] (==) Assigned the driver to the xf86ConfigLayout
[     3.963] (II) LoadModule: "intel"
[     3.965] (WW) Warning, couldn't open module intel
[     3.965] (II) UnloadModule: "intel"
[     3.965] (II) Unloading intel
[     3.965] (EE) Failed to load module "intel" (module does not exist, 0)
[     3.965] (II) LoadModule: "nouveau"
[     3.966] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[     3.968] (II) Module nouveau: vendor="X.Org Foundation"
[     3.968] 	compiled for 1.19.2, module version = 1.0.14
[     3.968] 	Module class: X.Org Video Driver
[     3.968] 	ABI class: X.Org Video Driver, version 23.0
[     3.968] (II) LoadModule: "nv"
[     3.968] (WW) Warning, couldn't open module nv
[     3.968] (II) UnloadModule: "nv"
[     3.968] (II) Unloading nv
[     3.968] (EE) Failed to load module "nv" (module does not exist, 0)
[     3.968] (II) LoadModule: "modesetting"
[     3.968] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     3.969] (II) Module modesetting: vendor="X.Org Foundation"
[     3.969] 	compiled for 1.19.3, module version = 1.19.3
[     3.969] 	Module class: X.Org Video Driver
[     3.969] 	ABI class: X.Org Video Driver, version 23.0
[     3.969] (II) LoadModule: "fbdev"
[     3.969] (WW) Warning, couldn't open module fbdev
[     3.969] (II) UnloadModule: "fbdev"
[     3.969] (II) Unloading fbdev
[     3.969] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     3.969] (II) LoadModule: "vesa"
[     3.970] (WW) Warning, couldn't open module vesa
[     3.970] (II) UnloadModule: "vesa"
[     3.970] (II) Unloading vesa
[     3.970] (EE) Failed to load module "vesa" (module does not exist, 0)
[     3.970] (II) NOUVEAU driver 
[     3.970] (II) NOUVEAU driver for NVIDIA chipset families :
[     3.970] 	RIVA TNT        (NV04)
[     3.970] 	RIVA TNT2       (NV05)
[     3.970] 	GeForce 256     (NV10)
[     3.970] 	GeForce 2       (NV11, NV15)
[     3.970] 	GeForce 4MX     (NV17, NV18)
[     3.970] 	GeForce 3       (NV20)
[     3.970] 	GeForce 4Ti     (NV25, NV28)
[     3.970] 	GeForce FX      (NV3x)
[     3.970] 	GeForce 6       (NV4x)
[     3.970] 	GeForce 7       (G7x)
[     3.970] 	GeForce 8       (G8x)
[     3.970] 	GeForce GTX 200 (NVA0)
[     3.970] 	GeForce GTX 400 (NVC0)
[     3.970] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     3.986] (II) modeset(0): using drv /dev/dri/card0
[     3.986] (II) [drm] nouveau interface version: 1.3.1
[     3.986] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     3.986] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[     3.986] (==) modeset(0): RGB weight 888
[     3.986] (==) modeset(0): Default visual is TrueColor
[     3.986] (II) Loading sub module "glamoregl"
[     3.986] (II) LoadModule: "glamoregl"
[     3.986] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     4.006] (II) Module glamoregl: vendor="X.Org Foundation"
[     4.006] 	compiled for 1.19.3, module version = 1.0.0
[     4.006] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     4.006] (II) glamor: OpenGL accelerated X.org driver based.
[     4.056] (II) glamor: EGL version 1.4 (DRI2):
[     4.065] (II) modeset(0): glamor initialized
[     4.066] (II) modeset(0): Output eDP-1 has no monitor section
[     4.066] (II) modeset(0): Output DP-1 has no monitor section
[     4.076] (II) modeset(0): Output HDMI-1 has no monitor section
[     4.076] (II) modeset(0): Output DP-2 has no monitor section
[     4.077] (II) modeset(0): EDID for output eDP-1
[     4.077] (II) modeset(0): Manufacturer: SDC  Model: 324c  Serial#: 0
[     4.077] (II) modeset(0): Year: 2013  Week: 0
[     4.077] (II) modeset(0): EDID Version: 1.4
[     4.077] (II) modeset(0): Digital Display Input
[     4.077] (II) modeset(0): 6 bits per channel
[     4.077] (II) modeset(0): Digital interface is DisplayPort
[     4.077] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[     4.077] (II) modeset(0): Gamma: 2.20
[     4.077] (II) modeset(0): No DPMS capabilities specified
[     4.077] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[     4.077] (II) modeset(0): First detailed timing is preferred mode
[     4.077] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[     4.077] (II) modeset(0): redX: 0.620 redY: 0.355   greenX: 0.300 greenY: 0.580
[     4.077] (II) modeset(0): blueX: 0.150 blueY: 0.090   whiteX: 0.313 whiteY: 0.329
[     4.077] (II) modeset(0): Manufacturer's mask: 0
[     4.077] (II) modeset(0): Supported detailed timing:
[     4.077] (II) modeset(0): clock: 143.0 MHz   Image Size:  344 x 194 mm
[     4.077] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[     4.077] (II) modeset(0): v_active: 1080  v_sync: 1082  v_sync_end 1087 v_blanking: 1144 v_border: 0
[     4.077] (II) modeset(0): Unknown vendor-specific block f
[     4.077] (II) modeset(0):  SAMSUNG
[     4.077] (II) modeset(0):  156HL01-104
[     4.077] (II) modeset(0): EDID (in hex):
[     4.077] (II) modeset(0): 	00ffffffffffff004c834c3200000000
[     4.077] (II) modeset(0): 	00170104952213780ace859e5b4c9426
[     4.077] (II) modeset(0): 	17505400000001010101010101010101
[     4.077] (II) modeset(0): 	010101010101dc3780a0703840403020
[     4.077] (II) modeset(0): 	250058c2100000190000000f00000000
[     4.077] (II) modeset(0): 	00000000001e82105200000000fe0053
[     4.077] (II) modeset(0): 	414d53554e470a2020202020000000fe
[     4.077] (II) modeset(0): 	00313536484c30312d3130340a2000cf
[     4.077] (II) modeset(0): Printing probed modes for output eDP-1
[     4.077] (II) modeset(0): Modeline "1920x1080"x60.1  143.00  1920 1968 2000 2080  1080 1082 1087 1144 -hsync -vsync (68.8 kHz eP)
[     4.077] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[     4.077] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[     4.077] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[     4.077] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[     4.077] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[     4.077] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[     4.077] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[     4.077] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[     4.077] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[     4.077] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[     4.077] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[     4.077] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[     4.077] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[     4.077] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[     4.077] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[     4.077] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[     4.077] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[     4.077] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[     4.077] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[     4.077] (II) modeset(0): EDID for output DP-1
[     4.086] (II) modeset(0): EDID for output HDMI-1
[     4.086] (II) modeset(0): EDID for output DP-2
[     4.086] (II) modeset(0): Output eDP-1 connected
[     4.086] (II) modeset(0): Output DP-1 disconnected
[     4.086] (II) modeset(0): Output HDMI-1 disconnected
[     4.086] (II) modeset(0): Output DP-2 disconnected
[     4.086] (II) modeset(0): Using exact sizes for initial modes
[     4.086] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[     4.086] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[     4.086] (==) modeset(0): DPI set to (96, 96)
[     4.086] (II) Loading sub module "fb"
[     4.086] (II) LoadModule: "fb"
[     4.086] (II) Loading /usr/lib/xorg/modules/libfb.so
[     4.087] (II) Module fb: vendor="X.Org Foundation"
[     4.087] 	compiled for 1.19.3, module version = 1.0.0
[     4.087] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     4.087] (II) Loading sub module "dri2"
[     4.087] (II) LoadModule: "dri2"
[     4.087] (II) Module "dri2" already built-in
[     4.087] (--) NOUVEAU(G0): Chipset: "NVIDIA NV117"
[     4.087] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[     4.087] (==) NOUVEAU(G0): RGB weight 888
[     4.087] (==) NOUVEAU(G0): Default visual is TrueColor
[     4.087] (==) NOUVEAU(G0): Using HW cursor
[     4.087] (==) NOUVEAU(G0): Allowed maximum DRI level 2.
[     4.087] (==) NOUVEAU(G0): GLX sync to VBlank enabled.
[     4.087] (==) NOUVEAU(G0): Page flipping enabled
[     4.087] (==) NOUVEAU(G0): Swap limit set to 1 [Max allowed 2]
[     4.087] (==) NOUVEAU(G0): Page flipping synced to vblank by kernel.
[     4.087] (==) NOUVEAU(G0): Using gamma correction (1.0, 1.0, 1.0)
[     4.087] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[     4.087] (**) NOUVEAU(G0):  Mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz
[     4.087] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz)
[     4.087] (==) NOUVEAU(G0): DPI set to (96, 96)
[     4.087] (II) Loading sub module "fb"
[     4.087] (II) LoadModule: "fb"
[     4.087] (II) Loading /usr/lib/xorg/modules/libfb.so
[     4.087] (II) Module fb: vendor="X.Org Foundation"
[     4.087] 	compiled for 1.19.3, module version = 1.0.0
[     4.087] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     4.087] (II) Loading sub module "shadowfb"
[     4.087] (II) LoadModule: "shadowfb"
[     4.087] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[     4.088] (II) Module shadowfb: vendor="X.Org Foundation"
[     4.088] 	compiled for 1.19.3, module version = 1.0.0
[     4.088] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     4.088] (==) Depth 24 pixmap format is 32 bpp
[     4.235] (II) NOUVEAU(G0): Channel setup complete.
[     4.261] (II) NOUVEAU(G0): [COPY] async initialised.
[     4.264] (II) NOUVEAU(G0): Hardware support for Present enabled
[     4.264] (II) NOUVEAU(G0): [DRI2] Setup complete
[     4.264] (II) NOUVEAU(G0): [DRI2]   DRI driver: nouveau
[     4.264] (II) NOUVEAU(G0): [DRI2]   VDPAU driver: nouveau
[     4.264] (II) Loading sub module "exa"
[     4.264] (II) LoadModule: "exa"
[     4.264] (II) Loading /usr/lib/xorg/modules/libexa.so
[     4.266] (II) Module exa: vendor="X.Org Foundation"
[     4.266] 	compiled for 1.19.3, module version = 2.6.0
[     4.266] 	ABI class: X.Org Video Driver, version 23.0
[     4.266] (II) EXA(256): Driver allocated offscreen pixmaps
[     4.266] (II) EXA(256): Driver registered support for the following operations:
[     4.266] (II)         Solid
[     4.266] (II)         Copy
[     4.266] (II)         Composite (RENDER acceleration)
[     4.266] (II)         UploadToScreen
[     4.266] (II)         DownloadFromScreen
[     4.266] (==) NOUVEAU(G0): Backing store enabled
[     4.266] (==) NOUVEAU(G0): Silken mouse enabled
[     4.266] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[     4.266] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[     4.266] (==) NOUVEAU(G0): DPMS enabled
[     4.266] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     4.347] (==) modeset(0): Backing store enabled
[     4.347] (==) modeset(0): Silken mouse enabled
[     4.347] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     4.347] (==) modeset(0): DPMS enabled
[     4.347] (II) modeset(0): [DRI2] Setup complete
[     4.347] (II) modeset(0): [DRI2]   DRI driver: i965
[     4.347] (II) modeset(0): [DRI2]   VDPAU driver: i965
[     4.347] (--) RandR disabled
[     4.352] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     4.352] (II) AIGLX: enabled GLX_ARB_create_context
[     4.352] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     4.352] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[     4.352] (II) AIGLX: enabled GLX_INTEL_swap_event
[     4.352] (II) AIGLX: enabled GLX_SGI_swap_control
[     4.352] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     4.352] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     4.352] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[     4.352] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     4.352] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     4.352] (II) AIGLX: Loaded and initialized i965
[     4.352] (II) GLX: Initialized DRI2 GL provider for screen 0
[     4.353] (II) NOUVEAU(G0): NVEnterVT is called.
[     4.357] (II) modeset(0): Damage tracking initialized
[     4.357] (II) modeset(0): Setting screen physical size to 508 x 285
[     4.424] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[     4.424] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.424] (**) Power Button: Applying InputClass "system-keyboard"
[     4.424] (II) LoadModule: "libinput"
[     4.424] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     4.429] (II) Module libinput: vendor="X.Org Foundation"
[     4.429] 	compiled for 1.19.2, module version = 0.25.0
[     4.429] 	Module class: X.Org XInput Driver
[     4.429] 	ABI class: X.Org XInput driver, version 24.1
[     4.429] (II) Using input driver 'libinput' for 'Power Button'
[     4.429] (**) Power Button: always reports core events
[     4.429] (**) Option "Device" "/dev/input/event4"
[     4.429] (**) Option "_source" "server/udev"
[     4.430] (II) event4  - (II) Power Button: (II) is tagged by udev as: Keyboard
[     4.430] (II) event4  - (II) Power Button: (II) device is a keyboard
[     4.430] (II) event4  - (II) Power Button: (II) device removed
[     4.456] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[     4.456] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     4.456] (**) Option "xkb_layout" "es"
[     4.474] (II) event4  - (II) Power Button: (II) is tagged by udev as: Keyboard
[     4.474] (II) event4  - (II) Power Button: (II) device is a keyboard
[     4.474] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event1)
[     4.474] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[     4.474] (**) Asus Wireless Radio Control: Applying InputClass "system-keyboard"
[     4.474] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[     4.474] (**) Asus Wireless Radio Control: always reports core events
[     4.474] (**) Option "Device" "/dev/input/event1"
[     4.474] (**) Option "_source" "server/udev"
[     4.474] (II) event1  - (II) Asus Wireless Radio Control: (II) is tagged by udev as: Keyboard
[     4.474] (II) event1  - (II) Asus Wireless Radio Control: (II) device is a keyboard
[     4.474] (II) event1  - (II) Asus Wireless Radio Control: (II) device removed
[     4.500] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input1/event1"
[     4.500] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[     4.500] (**) Option "xkb_layout" "es"
[     4.500] (II) event1  - (II) Asus Wireless Radio Control: (II) is tagged by udev as: Keyboard
[     4.500] (II) event1  - (II) Asus Wireless Radio Control: (II) device is a keyboard
[     4.500] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[     4.500] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     4.500] (**) Video Bus: Applying InputClass "system-keyboard"
[     4.500] (II) Using input driver 'libinput' for 'Video Bus'
[     4.500] (**) Video Bus: always reports core events
[     4.500] (**) Option "Device" "/dev/input/event7"
[     4.500] (**) Option "_source" "server/udev"
[     4.501] (II) event7  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[     4.501] (II) event7  - (II) Video Bus: (II) device is a keyboard
[     4.501] (II) event7  - (II) Video Bus: (II) device removed
[     4.520] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event7"
[     4.520] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     4.520] (**) Option "xkb_layout" "es"
[     4.521] (II) event7  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[     4.521] (II) event7  - (II) Video Bus: (II) device is a keyboard
[     4.521] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[     4.521] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     4.521] (**) Video Bus: Applying InputClass "system-keyboard"
[     4.521] (II) Using input driver 'libinput' for 'Video Bus'
[     4.521] (**) Video Bus: always reports core events
[     4.521] (**) Option "Device" "/dev/input/event8"
[     4.521] (**) Option "_source" "server/udev"
[     4.522] (II) event8  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[     4.522] (II) event8  - (II) Video Bus: (II) device is a keyboard
[     4.522] (II) event8  - (II) Video Bus: (II) device removed
[     4.540] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input8/event8"
[     4.540] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[     4.540] (**) Option "xkb_layout" "es"
[     4.541] (II) event8  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[     4.541] (II) event8  - (II) Video Bus: (II) device is a keyboard
[     4.541] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[     4.541] (II) No input driver specified, ignoring this device.
[     4.541] (II) This device may have been added with another device file.
[     4.542] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[     4.542] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     4.542] (**) Sleep Button: Applying InputClass "system-keyboard"
[     4.542] (II) Using input driver 'libinput' for 'Sleep Button'
[     4.542] (**) Sleep Button: always reports core events
[     4.542] (**) Option "Device" "/dev/input/event3"
[     4.542] (**) Option "_source" "server/udev"
[     4.542] (II) event3  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[     4.542] (II) event3  - (II) Sleep Button: (II) device is a keyboard
[     4.542] (II) event3  - (II) Sleep Button: (II) device removed
[     4.560] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3"
[     4.560] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[     4.560] (**) Option "xkb_layout" "es"
[     4.560] (II) event3  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[     4.561] (II) event3  - (II) Sleep Button: (II) device is a keyboard
[     4.562] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event9)
[     4.562] (**) USB2.0 HD UVC WebCam: Applying InputClass "libinput keyboard catchall"
[     4.562] (**) USB2.0 HD UVC WebCam: Applying InputClass "system-keyboard"
[     4.562] (II) Using input driver 'libinput' for 'USB2.0 HD UVC WebCam'
[     4.562] (**) USB2.0 HD UVC WebCam: always reports core events
[     4.562] (**) Option "Device" "/dev/input/event9"
[     4.562] (**) Option "_source" "server/udev"
[     4.563] (II) event9  - (II) USB2.0 HD UVC WebCam: (II) is tagged by udev as: Keyboard
[     4.563] (II) event9  - (II) USB2.0 HD UVC WebCam: (II) device is a keyboard
[     4.563] (II) event9  - (II) USB2.0 HD UVC WebCam: (II) device removed
[     4.610] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input9/event9"
[     4.610] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 11)
[     4.610] (**) Option "xkb_layout" "es"
[     4.611] (II) event9  - (II) USB2.0 HD UVC WebCam: (II) is tagged by udev as: Keyboard
[     4.611] (II) event9  - (II) USB2.0 HD UVC WebCam: (II) device is a keyboard
[     4.612] (II) config/udev: Adding input device Logitech M325 (/dev/input/event11)
[     4.612] (**) Logitech M325: Applying InputClass "libinput pointer catchall"
[     4.612] (II) Using input driver 'libinput' for 'Logitech M325'
[     4.612] (**) Logitech M325: always reports core events
[     4.612] (**) Option "Device" "/dev/input/event11"
[     4.612] (**) Option "_source" "server/udev"
[     4.613] (II) event11 - (II) Logitech M325: (II) is tagged by udev as: Mouse
[     4.613] (II) event11 - (II) Logitech M325: (II) device set to 600 DPI
[     4.613] (II) event11 - (II) Logitech M325: (II) device is a pointer
[     4.613] (II) event11 - (II) Logitech M325: (II) device removed
[     4.660] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.2/0003:046D:C52B.0003/0003:046D:400A.0004/input/input11/event11"
[     4.660] (II) XINPUT: Adding extended input device "Logitech M325" (type: MOUSE, id 12)
[     4.660] (**) Option "AccelerationScheme" "none"
[     4.660] (**) Logitech M325: (accel) selected scheme none/0
[     4.660] (**) Logitech M325: (accel) acceleration factor: 2.000
[     4.660] (**) Logitech M325: (accel) acceleration threshold: 4
[     4.660] (II) event11 - (II) Logitech M325: (II) is tagged by udev as: Mouse
[     4.660] (II) event11 - (II) Logitech M325: (II) device set to 600 DPI
[     4.660] (II) event11 - (II) Logitech M325: (II) device is a pointer
[     4.660] (II) config/udev: Adding input device Logitech M325 (/dev/input/mouse1)
[     4.660] (II) No input driver specified, ignoring this device.
[     4.660] (II) This device may have been added with another device file.
[     4.661] (II) config/udev: Adding input device Asus FTE TouchPad (/dev/input/event10)
[     4.661] (**) Asus FTE TouchPad: Applying InputClass "libinput touchpad catchall"
[     4.661] (**) Asus FTE TouchPad: Applying InputClass "Asus FTE TouchPad"
[     4.661] (II) Using input driver 'libinput' for 'Asus FTE TouchPad'
[     4.661] (**) Asus FTE TouchPad: always reports core events
[     4.661] (**) Option "Device" "/dev/input/event10"
[     4.661] (**) Option "_source" "server/udev"
[     4.767] (II) event10 - (II) Asus FTE TouchPad: (II) is tagged by udev as: Touchpad
[     4.767] (II) event10 - (II) Asus FTE TouchPad: (II) no resolution or size hints, assuming a size of 69x50mm
[     4.767] (II) event10 - (II) Asus FTE TouchPad: (II) device is a atouchpad
[     4.767] (II) event10 - (II) Asus FTE TouchPad: (II) device removed
[     4.840] (**) Option "Tapping" "on"
[     4.840] (**) Option "TappingButtonMap" "lmr"
[     4.840] (**) Option "NaturalScrolling" "true"
[     4.840] (**) Option "ScrollMethod" "twofinger"
[     4.840] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-20/i2c-FTE1001:00/0018:0B05:0101.0005/input/input10/event10"
[     4.840] (II) XINPUT: Adding extended input device "Asus FTE TouchPad" (type: TOUCHPAD, id 13)
[     4.840] (**) Option "AccelerationScheme" "none"
[     4.840] (**) Asus FTE TouchPad: (accel) selected scheme none/0
[     4.840] (**) Asus FTE TouchPad: (accel) acceleration factor: 2.000
[     4.840] (**) Asus FTE TouchPad: (accel) acceleration threshold: 4
[     4.842] (II) event10 - (II) Asus FTE TouchPad: (II) is tagged by udev as: Touchpad
[     4.842] (II) event10 - (II) Asus FTE TouchPad: (II) no resolution or size hints, assuming a size of 69x50mm
[     4.842] (II) event10 - (II) Asus FTE TouchPad: (II) device is a atouchpad
[     4.843] (II) config/udev: Adding input device Asus FTE TouchPad (/dev/input/mouse0)
[     4.843] (**) Asus FTE TouchPad: Applying InputClass "Asus FTE TouchPad"
[     4.843] (II) Using input driver 'libinput' for 'Asus FTE TouchPad'
[     4.843] (**) Asus FTE TouchPad: always reports core events
[     4.843] (**) Option "Device" "/dev/input/mouse0"
[     4.843] (**) Option "_source" "server/udev"
[     4.883] (II) mouse0  - failed to create input device '/dev/input/mouse0'.
[     4.883] (EE) libinput: Asus FTE TouchPad: Failed to create a device for /dev/input/mouse0
[     4.883] (EE) PreInit returned 2 for "Asus FTE TouchPad"
[     4.883] (II) UnloadModule: "libinput"
[     4.884] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event6)
[     4.884] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     4.884] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[     4.884] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[     4.884] (**) Asus WMI hotkeys: always reports core events
[     4.884] (**) Option "Device" "/dev/input/event6"
[     4.884] (**) Option "_source" "server/udev"
[     4.884] (II) event6  - (II) Asus WMI hotkeys: (II) is tagged by udev as: Keyboard
[     4.884] (II) event6  - (II) Asus WMI hotkeys: (II) device is a keyboard
[     4.885] (II) event6  - (II) Asus WMI hotkeys: (II) device removed
[     4.903] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input6/event6"
[     4.903] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 14)
[     4.903] (**) Option "xkb_layout" "es"
[     4.904] (II) event6  - (II) Asus WMI hotkeys: (II) is tagged by udev as: Keyboard
[     4.904] (II) event6  - (II) Asus WMI hotkeys: (II) device is a keyboard
[     4.905] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     4.905] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     4.905] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[     4.905] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     4.905] (**) AT Translated Set 2 keyboard: always reports core events
[     4.905] (**) Option "Device" "/dev/input/event0"
[     4.905] (**) Option "_source" "server/udev"
[     4.905] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[     4.905] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[     4.905] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[     4.943] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     4.943] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[     4.943] (**) Option "xkb_layout" "es"
[     4.944] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[     4.944] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[     4.944] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[     4.944] (II) No input driver specified, ignoring this device.
[     4.944] (II) This device may have been added with another device file.
[     5.001] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event14)
[     5.001] (II) No input driver specified, ignoring this device.
[     5.001] (II) This device may have been added with another device file.
[     5.001] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[     5.001] (II) No input driver specified, ignoring this device.
[     5.001] (II) This device may have been added with another device file.
[     5.001] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event12)
[     5.001] (II) No input driver specified, ignoring this device.
[     5.001] (II) This device may have been added with another device file.
[     5.002] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)
[     5.002] (II) No input driver specified, ignoring this device.
[     5.002] (II) This device may have been added with another device file.
[    10.820] (II) modeset(0): EDID vendor "SDC", prod id 12876
[    10.820] (II) modeset(0): Printing DDC gathered Modelines:
[    10.820] (II) modeset(0): Modeline "1920x1080"x0.0  143.00  1920 1968 2000 2080  1080 1082 1087 1144 -hsync -vsync (68.8 kHz eP)
[    11.204] (II) modeset(0): EDID vendor "SDC", prod id 12876
[    11.204] (II) modeset(0): Printing DDC gathered Modelines:
[    11.204] (II) modeset(0): Modeline "1920x1080"x0.0  143.00  1920 1968 2000 2080  1080 1082 1087 1144 -hsync -vsync (68.8 kHz eP)

In fact, when I execute this command it never ends instead of doing <Ctrl-C>:

➜ lspci -k | grep -A 2 -E "(VGA|3D)"

Arch Linux

#1 2017-04-16 12:39:08

SDDM KDE Plasma doesn't init (nvidia, mesa)

#2 2017-04-16 15:21:24

Re: SDDM KDE Plasma doesn't init (nvidia, mesa)

#3 2017-04-16 18:05:33

Re: SDDM KDE Plasma doesn't init (nvidia, mesa)

#4 2017-04-16 18:21:30

Re: SDDM KDE Plasma doesn't init (nvidia, mesa)

#5 2017-04-16 18:47:01

Re: SDDM KDE Plasma doesn't init (nvidia, mesa)

#6 2017-04-16 21:02:03

Re: SDDM KDE Plasma doesn't init (nvidia, mesa)

#7 2017-04-16 22:20:56

Re: SDDM KDE Plasma doesn't init (nvidia, mesa)

#8 2017-04-16 22:34:11

Re: SDDM KDE Plasma doesn't init (nvidia, mesa)

#9 2017-04-17 10:36:42

Re: SDDM KDE Plasma doesn't init (nvidia, mesa)

#10 2017-04-17 11:17:24

Re: SDDM KDE Plasma doesn't init (nvidia, mesa)

#11 2017-04-18 10:12:13

Re: SDDM KDE Plasma doesn't init (nvidia, mesa)

#12 2017-04-19 13:18:17

Re: SDDM KDE Plasma doesn't init (nvidia, mesa)

Board footer