You are not logged in.
I have a displayport connected to my Nvidia card which I want to use. I have installed Bumblebee, Mesa and the "Nvidia" package. I have also installed xf86-video-intel. I use XFCE, and when I connect my screen to the display port, the display "program" is opened. But, the display is not actually detected anywhere: `xrandr -q --verbose`:
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected 1920x1080+0+0 (0x47) normal (normal left inverted right x axis y axis) 340mm x 190mm
Identifier: 0x43
Timestamp: 16431
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1 2
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff000daec21500000000
04170104952213780246359e57579427
14505400000001010101010101010101
010101010101b43b804a713834405a3c
690058c21000001acd27804a71383440
5a3c690058c21000001a000000000000
00000000000000000000000000000002
000c33ff0f3c96211433960000000070
BACKLIGHT: 4882
range: (0, 4882)
Backlight: 4882
range: (0, 4882)
scaling mode: Full aspect
supported: None, Full, Center, Full aspect
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
audio: auto
supported: force-dvi, off, auto, on
1920x1080 (0x47) 152.840MHz +HSync -VSync *current +preferred
h: width 1920 start 2010 end 2070 total 2250 skew 0 clock 67.93KHz
v: height 1080 start 1086 end 1095 total 1132 clock 60.01Hz
1920x1080 (0xe9) 101.890MHz +HSync -VSync
h: width 1920 start 2010 end 2070 total 2250 skew 0 clock 45.28KHz
v: height 1080 start 1086 end 1095 total 1132 clock 40.00Hz
1400x1050 (0xea) 122.000MHz +HSync +VSync
h: width 1400 start 1488 end 1640 total 1880 skew 0 clock 64.89KHz
v: height 1050 start 1052 end 1064 total 1082 clock 59.98Hz
1600x900 (0xeb) 118.997MHz -HSync +VSync
h: width 1600 start 1696 end 1864 total 2128 skew 0 clock 55.92KHz
v: height 900 start 901 end 904 total 932 clock 60.00Hz
1280x1024 (0xec) 108.000MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 63.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.02Hz
1280x960 (0xed) 108.000MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.00KHz
v: height 960 start 961 end 964 total 1000 clock 60.00Hz
1368x768 (0xee) 85.860MHz -HSync +VSync
h: width 1368 start 1440 end 1584 total 1800 skew 0 clock 47.70KHz
v: height 768 start 769 end 772 total 795 clock 60.00Hz
1280x720 (0xef) 74.480MHz -HSync +VSync
h: width 1280 start 1336 end 1472 total 1664 skew 0 clock 44.76KHz
v: height 720 start 721 end 724 total 746 clock 60.00Hz
1024x768 (0xf0) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
1024x576 (0xf1) 46.995MHz -HSync +VSync
h: width 1024 start 1064 end 1168 total 1312 skew 0 clock 35.82KHz
v: height 576 start 577 end 580 total 597 clock 60.00Hz
960x540 (0xf2) 40.784MHz -HSync +VSync
h: width 960 start 992 end 1088 total 1216 skew 0 clock 33.54KHz
v: height 540 start 541 end 544 total 559 clock 60.00Hz
800x600 (0xf3) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
800x600 (0xf4) 36.000MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.16KHz
v: height 600 start 601 end 603 total 625 clock 56.25Hz
864x486 (0xf5) 32.901MHz -HSync +VSync
h: width 864 start 888 end 976 total 1088 skew 0 clock 30.24KHz
v: height 486 start 487 end 490 total 504 clock 60.00Hz
640x480 (0xf6) 25.175MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHz
v: height 480 start 490 end 492 total 525 clock 59.94Hz
720x405 (0xf7) 22.176MHz -HSync +VSync
h: width 720 start 728 end 800 total 880 skew 0 clock 25.20KHz
v: height 405 start 406 end 409 total 420 clock 60.00Hz
640x360 (0xf8) 17.187MHz -HSync +VSync
h: width 640 start 640 end 704 total 768 skew 0 clock 22.38KHz
v: height 360 start 361 end 364 total 373 clock 60.00Hz
VGA1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x44
Timestamp: 16431
Subpixel: unknown
Clones:
CRTCs: 0 1 2
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x45
Timestamp: 16431
Subpixel: no subpixels
Clones:
CRTCs: 3
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
What could be wrong and where else could I be searching?
A small update: if I remove bbswitch, then the display program is no longer automatically opened.
Last edited by SmallAndSimple (2017-04-18 09:16:26)
Offline
The problem was resolved by following this answer: https://unix.stackexchange.com/question … 276#321276
Specifically, I copied the `/etc/bumblebee/xorg.conf.nvidia` file:
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "true"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "AllowEmptyInitialConfiguration"
EndSection
Section "Screen"
Identifier "Screen0"
Device "DiscreteNVidia"
EndSection
It now seems to work flawless.
Offline