You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2017-06-01 20:26:19
- duskel
- Member
- Registered: 2017-06-01
- Posts: 6
[SOLVED] efi: EFI_MEMMAP is not enabled
Hi,
I am not able to get rid of the message below during linux loading.
efi: EFI_MEMMAP is not enabled.
efi: Failed to lookup EFI memory descriptor for 0x00000000cef7e01
starting version 232
/dev/sda3:clean...I am using grub BIOS mode.
Thanks a lot.
Kernel: 4.11.3-1-ARCH
System updated: Yes
============================================
fdisk -l
============================================
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x5cfd80d1
Device Boot Start End Sectors Size Id Type
/dev/sda1 2048 209717247 209715200 100G 7 HPFS/NTFS/exFAT
/dev/sda2 209717248 218105855 8388608 4G 82 Linux swap / Solaris
/dev/sda3 * 218105856 427821055 209715200 100G 83 Linux
/dev/sda4 427821056 976773167 548952112 261.8G 83 Linux============================================
/boot/grub/grub.cfg
============================================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 30033c00-34c1-4503-ad1e-8b2f6d4fa294
else
search --no-floppy --fs-uuid --set=root 30033c00-34c1-4503-ad1e-8b2f6d4fa294
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-30033c00-34c1-4503-ad1e-8b2f6d4fa294' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 30033c00-34c1-4503-ad1e-8b2f6d4fa294
else
search --no-floppy --fs-uuid --set=root 30033c00-34c1-4503-ad1e-8b2f6d4fa294
fi
echo 'Loading Linux linux ...'
linux /boot/vmlinuz-linux root=UUID=30033c00-34c1-4503-ad1e-8b2f6d4fa294 rw quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
}
submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-30033c00-34c1-4503-ad1e-8b2f6d4fa294' {
menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-30033c00-34c1-4503-ad1e-8b2f6d4fa294' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 30033c00-34c1-4503-ad1e-8b2f6d4fa294
else
search --no-floppy --fs-uuid --set=root 30033c00-34c1-4503-ad1e-8b2f6d4fa294
fi
echo 'Loading Linux linux ...'
linux /boot/vmlinuz-linux root=UUID=30033c00-34c1-4503-ad1e-8b2f6d4fa294 rw quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
}
menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-30033c00-34c1-4503-ad1e-8b2f6d4fa294' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 30033c00-34c1-4503-ad1e-8b2f6d4fa294
else
search --no-floppy --fs-uuid --set=root 30033c00-34c1-4503-ad1e-8b2f6d4fa294
fi
echo 'Loading Linux linux ...'
linux /boot/vmlinuz-linux root=UUID=30033c00-34c1-4503-ad1e-8b2f6d4fa294 rw quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
if [ "${grub_platform}" == "pc" ]; then
menuentry "Microsoft Windows Vista/7/8/8.1 BIOS-MBR" {
insmod part_msdos
insmod ntfs
insmod search_fs_uuid
insmod ntldr
search --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 D6943662943644F1
ntldr /bootmgr
}
fi
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/40_custom_original ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom_original ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###Last edited by duskel (2017-06-15 15:06:18)
Offline
#2 2017-06-01 20:32:55
- jasonwryan
- Anarchist
- From: .nz
- Registered: 2009-05-09
- Posts: 30,424
- Website
Re: [SOLVED] efi: EFI_MEMMAP is not enabled
Please use code tags when pasting to the boards: https://wiki.archlinux.org/index.php/Co … s_and_code
Offline
#3 2017-06-01 22:16:26
- zetilozeyaho
- Member
- Registered: 2017-05-19
- Posts: 5
Re: [SOLVED] efi: EFI_MEMMAP is not enabled
Add 'add_efi_memmap' to kernel parameters:
root=UUID=30033c00-34c1-4503-ad1e-8b2f6d4fa294 rw quiet add_efi_memmap
Offline
#4 2017-06-01 22:22:42
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,323
Re: [SOLVED] efi: EFI_MEMMAP is not enabled
duskel indicated the system is booting in bios mode so the error seems strange to me. Asking the kernel to trust an efi memory map on a bios booting system may lead to worse issues than an error message.
Edit:
@duskel is the issue also present under the linux-lts kernel?
Last edited by loqs (2017-06-01 22:25:06)
Offline
#5 2017-06-01 22:44:31
- duskel
- Member
- Registered: 2017-06-01
- Posts: 6
Re: [SOLVED] efi: EFI_MEMMAP is not enabled
@Ioqs
Yes, it is present.
dmesg -k[ 0.000000] Linux version 4.11.3-1-ARCH (builduser@tobias) (gcc version 7.1.1 20170516 (GCC) ) #1 SMP PREEMPT Sun May 28 10:40:17 CEST 2017
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=30033c00-34c1-4503-ad1e-8b2f6d4fa294 rw quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d6709fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d670a000-0x00000000d67fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d6800000-0x00000000d6f1bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d6f1c000-0x00000000d6ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d7000000-0x00000000d77b2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d77b3000-0x00000000d77fffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d7800000-0x00000000d8efbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d8efc000-0x00000000d8ffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d9000000-0x00000000daae4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000daae5000-0x00000000dace4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dace5000-0x00000000dad27fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dad28000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011e5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. Latitude E5430 non-vPro/030X2M, BIOS A11 05/20/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x11e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0DB800000 mask FFF800000 uncachable
[ 0.000000] 5 base 11F000000 mask FFF000000 uncachable
[ 0.000000] 6 base 11E800000 mask FFF800000 uncachable
[ 0.000000] 7 base 11E600000 mask FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fda20-0x000fda2f] mapped at [ffff8800000fda20]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
[ 0.000000] BRK [0x01d42000, 0x01d42fff] PGTABLE
[ 0.000000] BRK [0x01d43000, 0x01d43fff] PGTABLE
[ 0.000000] BRK [0x01d44000, 0x01d44fff] PGTABLE
[ 0.000000] BRK [0x01d45000, 0x01d45fff] PGTABLE
[ 0.000000] BRK [0x01d46000, 0x01d46fff] PGTABLE
[ 0.000000] BRK [0x01d47000, 0x01d47fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37485000-0x37a39fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000D77F3088 00008C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000D77FD6C0 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000D77F31A0 00A51B (v02 DELL CBX3 00000021 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000D8FFE080 000040
[ 0.000000] ACPI: APIC 0x00000000D77FD7D0 000072 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000D77FD848 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000D77FD890 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000D77FD8D0 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D77FD908 000415 (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000D77FDD20 0009B9 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000D77FE6E0 000B22 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 0x00000000D77FF208 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: ASF! 0x00000000D77FF2C0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: ASF! 0x00000000D77FF368 0000A0 (v32 INTEL D865GCH 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SLIC 0x00000000D77FF408 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.000000] ACPI: BGRT 0x00000000D77FF580 000038 (v00 \xfffffff4? 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011e5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11e5f3000-0x11e5f7fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011e5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000090fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.000000] node 0: [mem 0x0000000040005000-0x00000000d6709fff]
[ 0.000000] node 0: [mem 0x00000000d6800000-0x00000000d6f1bfff]
[ 0.000000] node 0: [mem 0x00000000d7000000-0x00000000d77b2fff]
[ 0.000000] node 0: [mem 0x00000000d7800000-0x00000000d8efbfff]
[ 0.000000] node 0: [mem 0x00000000d9000000-0x00000000daae4fff]
[ 0.000000] node 0: [mem 0x00000000dad28000-0x00000000daffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011e5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011e5fffff]
[ 0.000000] On node 0 totalpages: 1019425
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3984 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13923 pages used for memmap
[ 0.000000] DMA32 zone: 891025 pages, LIFO batch:31
[ 0.000000] Normal zone: 1944 pages used for memmap
[ 0.000000] Normal zone: 124416 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] efi: EFI_MEMMAP is not enabled.
[ 0.000000] efi: Failed to lookup EFI memory descriptor for 0x00000000cef7e018
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd670a000-0xd67fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd6f1c000-0xd6ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd77b3000-0xd77fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8efc000-0xd8ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaae5000-0xdace4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdace5000-0xdad27fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff88011e200000 s103256 r8192 d31912 u524288
[ 0.000000] pcpu-alloc: s103256 r8192 d31912 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1003473
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=30033c00-34c1-4503-ad1e-8b2f6d4fa294 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3925636K/4077700K available (6483K kernel code, 1090K rwdata, 2016K rodata, 1304K init, 904K bss, 152064K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:456 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2691.157 MHz processor
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5384.57 BogoMIPS (lpj=8970523)
[ 0.003333] pid_max: default: 32768 minimum: 301
[ 0.003333] ACPI: Core revision 20170119
[ 0.012950] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.012972] Security Framework initialized
[ 0.012973] Yama: becoming mindful.
[ 0.013152] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.014051] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.014465] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.014468] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.014660] CPU: Physical Processor ID: 0
[ 0.014660] CPU: Processor Core ID: 0
[ 0.014664] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.014665] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.014668] mce: CPU supports 7 MCE banks
[ 0.014680] process: using mwait in idle threads
[ 0.014683] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.014683] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.014786] Freeing SMP alternatives memory: 24K
[ 0.016637] ftrace: allocating 25536 entries in 100 pages
[ 0.023401] smpboot: Max logical packages: 2
[ 0.023407] DMAR: Host address width 36
[ 0.023408] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.023415] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.023416] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.023419] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.023420] DMAR: RMRR base: 0x000000dac5b000 end: 0x000000dac7afff
[ 0.023422] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[ 0.023424] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.023425] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.023426] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.023720] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.023721] x2apic enabled
[ 0.023727] Switched APIC routing to cluster x2apic.
[ 0.026876] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059897] TSC deadline timer enabled
[ 0.059900] smpboot: CPU0: Intel(R) Core(TM) i5-3340M CPU @ 2.70GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.070013] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.070062] ... version: 3
[ 0.070062] ... bit width: 48
[ 0.070063] ... generic registers: 4
[ 0.070063] ... value mask: 0000ffffffffffff
[ 0.070064] ... max period: 00007fffffffffff
[ 0.070064] ... fixed-purpose events: 3
[ 0.070065] ... event mask: 000000070000000f
[ 0.090117] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.096671] smp: Bringing up secondary CPUs ...
[ 0.123352] x86: Booting SMP configuration:
[ 0.123354] .... node #0, CPUs: #1 #2 #3
[ 0.428687] smp: Brought up 1 node, 4 CPUs
[ 0.428687] smpboot: Total of 4 processors activated (21542.23 BogoMIPS)
[ 0.430094] sched_clock: Marking stable (429999957, 0)->(428448491, 1551466)
[ 0.430295] devtmpfs: initialized
[ 0.430336] x86/mm: Memory block size: 128MB
[ 0.432214] PM: Registering ACPI NVS region [mem 0xd8efc000-0xd8ffffff] (1064960 bytes)
[ 0.432226] PM: Registering ACPI NVS region [mem 0xdace5000-0xdad27fff] (274432 bytes)
[ 0.432283] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.432290] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.432344] pinctrl core: initialized pinctrl subsystem
[ 0.432382] RTC time: 17:17:08, date: 06/01/17
[ 0.432453] NET: Registered protocol family 16
[ 0.432593] cpuidle: using governor ladder
[ 0.432624] cpuidle: using governor menu
[ 0.432626] PCCT header not found.
[ 0.432652] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.432653] ACPI: bus type PCI registered
[ 0.432654] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.432709] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.432711] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.432716] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.432779] PCI: Using configuration type 1 for base access
[ 0.432785] dmi type 0xB1 record - unknown flag
[ 0.432813] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.433400] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.433563] ACPI: Added _OSI(Module Device)
[ 0.433564] ACPI: Added _OSI(Processor Device)
[ 0.433565] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.433566] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.433733] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.444277] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.445975] ACPI: Dynamic OEM Table Load:
[ 0.445980] ACPI: SSDT 0xFFFF880118FC1000 000523 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.446239] ACPI: Dynamic OEM Table Load:
[ 0.446243] ACPI: SSDT 0xFFFF880118A21C00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.446435] ACPI: Dynamic OEM Table Load:
[ 0.446438] ACPI: SSDT 0xFFFF8801189FD200 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.447057] ACPI : EC: EC started
[ 0.447057] ACPI : EC: interrupt blocked
[ 0.449984] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[ 0.449985] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x10, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.449986] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[ 0.449987] ACPI: Interpreter enabled
[ 0.450009] ACPI: (supports S0 S3 S4 S5)
[ 0.450009] ACPI: Using IOAPIC for interrupt routing
[ 0.450032] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.462317] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.462321] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.462435] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.462861] PCI host bridge to bus 0000:00
[ 0.462863] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.462864] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.462865] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.462866] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.462867] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.462868] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[ 0.462869] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.462876] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.462965] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.462973] pci 0000:00:02.0: reg 0x10: [mem 0xf6400000-0xf67fffff 64bit]
[ 0.462978] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.462981] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.463082] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.463102] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
[ 0.463171] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.463216] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.463250] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.463270] pci 0000:00:16.0: reg 0x10: [mem 0xf7f1b000-0xf7f1b00f 64bit]
[ 0.463344] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.463424] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.463442] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f18000-0xf7f183ff]
[ 0.463525] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.463571] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.463600] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.463617] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
[ 0.463690] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.463739] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.463774] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.463902] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.463959] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.463994] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.464120] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.464177] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.464217] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.464343] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.464401] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.464436] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[ 0.464564] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.464623] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.464658] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
[ 0.464784] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.464839] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.464874] pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400
[ 0.465002] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.465058] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.465090] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.465108] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f17000-0xf7f173ff]
[ 0.465191] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.465236] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.465266] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 0.465433] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 0.465448] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.465456] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.465463] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.465471] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.465478] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.465486] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f16000-0xf7f167ff]
[ 0.465526] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.465595] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.465611] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f15000-0xf7f150ff 64bit]
[ 0.465631] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.465777] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.465884] pci 0000:02:00.0: [14e4:4359] type 00 class 0x028000
[ 0.465921] pci 0000:02:00.0: reg 0x10: [mem 0xf7e00000-0xf7e03fff 64bit]
[ 0.466110] pci 0000:02:00.0: supports D1 D2
[ 0.466111] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.466179] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.474246] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.474264] pci 0000:00:1c.1: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.474327] acpiphp: Slot [1] registered
[ 0.474333] pci 0000:00:1c.2: PCI bridge to [bus 03-06]
[ 0.474337] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.474340] pci 0000:00:1c.2: bridge window [mem 0xf7200000-0xf7bfffff]
[ 0.474346] pci 0000:00:1c.2: bridge window [mem 0xf0a00000-0xf13fffff 64bit pref]
[ 0.474398] acpiphp: Slot [1-1] registered
[ 0.474403] pci 0000:00:1c.3: PCI bridge to [bus 07-0a]
[ 0.474407] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.474410] pci 0000:00:1c.3: bridge window [mem 0xf6800000-0xf71fffff]
[ 0.474416] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
[ 0.474610] pci 0000:0b:00.0: [1217:8221] type 00 class 0x080501
[ 0.474663] pci 0000:0b:00.0: reg 0x10: [mem 0xf7d00000-0xf7d001ff]
[ 0.475012] pci 0000:0b:00.0: supports D1 D2
[ 0.475013] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.475096] pci 0000:0b:00.0: System wakeup disabled by ACPI
[ 0.484356] pci 0000:00:1c.5: PCI bridge to [bus 0b]
[ 0.484362] pci 0000:00:1c.5: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.484460] pci 0000:0c:00.0: [14e4:1681] type 00 class 0x020000
[ 0.484511] pci 0000:0c:00.0: reg 0x10: [mem 0xf7c10000-0xf7c1ffff 64bit]
[ 0.484549] pci 0000:0c:00.0: reg 0x18: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 0.484806] pci 0000:0c:00.0: PME# supported from D3hot D3cold
[ 0.485173] pci 0000:0c:00.0: System wakeup disabled by ACPI
[ 0.494273] pci 0000:00:1c.6: PCI bridge to [bus 0c]
[ 0.494293] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.495381] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.495431] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.495480] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.495528] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.495578] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.495625] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.495673] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.495718] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.497232] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.497285] ACPI : EC: interrupt unblocked
[ 0.497294] ACPI : EC: event unblocked
[ 0.497299] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x10, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.497300] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[ 0.497372] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.497374] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.497377] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.497378] vgaarb: loaded
[ 0.497440] PCI: Using ACPI for IRQ routing
[ 0.499029] PCI: pci_cache_line_size set to 64 bytes
[ 0.499196] e820: reserve RAM buffer [mem 0x00091800-0x0009ffff]
[ 0.499197] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.499198] e820: reserve RAM buffer [mem 0xd670a000-0xd7ffffff]
[ 0.499199] e820: reserve RAM buffer [mem 0xd6f1c000-0xd7ffffff]
[ 0.499199] e820: reserve RAM buffer [mem 0xd77b3000-0xd7ffffff]
[ 0.499200] e820: reserve RAM buffer [mem 0xd8efc000-0xdbffffff]
[ 0.499201] e820: reserve RAM buffer [mem 0xdaae5000-0xdbffffff]
[ 0.499202] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.499203] e820: reserve RAM buffer [mem 0x11e600000-0x11fffffff]
[ 0.499271] NetLabel: Initializing
[ 0.499271] NetLabel: domain hash size = 128
[ 0.499272] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.499285] NetLabel: unlabeled traffic allowed by default
[ 0.499339] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.499343] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.501369] clocksource: Switched to clocksource hpet
[ 0.508956] VFS: Disk quotas dquot_6.6.0
[ 0.508975] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.509040] pnp: PnP ACPI init
[ 0.509139] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.509142] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.509216] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.509217] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.509218] system 00:01: [io 0x1100-0x1103] has been reserved
[ 0.509219] system 00:01: [io 0xffff] has been reserved
[ 0.509221] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.509222] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.509223] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.509224] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.509226] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.509244] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.509284] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.509286] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.509325] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.509327] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.509355] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.509371] pnp 00:06: Plug and Play ACPI device, IDs DLL053c PNP0f13 (active)
[ 0.510052] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (disabled)
[ 0.510233] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.510234] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.510235] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.510237] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.510238] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.510239] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.510240] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.510241] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.510243] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.510245] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.510246] system 00:08: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 0.510248] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.510403] system 00:09: [mem 0x20000000-0x201fffff] has been reserved
[ 0.510404] system 00:09: [mem 0x40004000-0x40004fff] has been reserved
[ 0.510406] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.512088] pnp: PnP ACPI: found 10 devices
[ 0.518281] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.518355] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.518374] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.518380] pci 0000:00:1c.1: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.518392] pci 0000:00:1c.2: PCI bridge to [bus 03-06]
[ 0.518394] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.518401] pci 0000:00:1c.2: bridge window [mem 0xf7200000-0xf7bfffff]
[ 0.518405] pci 0000:00:1c.2: bridge window [mem 0xf0a00000-0xf13fffff 64bit pref]
[ 0.518414] pci 0000:00:1c.3: PCI bridge to [bus 07-0a]
[ 0.518416] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.518423] pci 0000:00:1c.3: bridge window [mem 0xf6800000-0xf71fffff]
[ 0.518427] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
[ 0.518435] pci 0000:00:1c.5: PCI bridge to [bus 0b]
[ 0.518441] pci 0000:00:1c.5: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.518453] pci 0000:00:1c.6: PCI bridge to [bus 0c]
[ 0.518459] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.518471] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.518472] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.518473] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.518474] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000e3fff window]
[ 0.518475] pci_bus 0000:00: resource 8 [mem 0x000e4000-0x000e7fff window]
[ 0.518476] pci_bus 0000:00: resource 9 [mem 0xdfa00000-0xfeafffff window]
[ 0.518477] pci_bus 0000:02: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.518478] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.518479] pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf7bfffff]
[ 0.518480] pci_bus 0000:03: resource 2 [mem 0xf0a00000-0xf13fffff 64bit pref]
[ 0.518481] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
[ 0.518482] pci_bus 0000:07: resource 1 [mem 0xf6800000-0xf71fffff]
[ 0.518483] pci_bus 0000:07: resource 2 [mem 0xf0000000-0xf09fffff 64bit pref]
[ 0.518484] pci_bus 0000:0b: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.518485] pci_bus 0000:0c: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.518564] NET: Registered protocol family 2
[ 0.518694] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.518753] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.518834] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.518856] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.518870] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.518907] NET: Registered protocol family 1
[ 0.518917] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.561506] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.561544] Unpacking initramfs...
[ 0.639735] Freeing initrd memory: 5844K
[ 0.639771] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.639773] software IO TLB [mem 0xd270a000-0xd670a000] (64MB) mapped at [ffff8800d270a000-ffff8800d6709fff]
[ 0.639933] Scanning for low memory corruption every 60 seconds
[ 0.640381] Initialise system trusted keyrings
[ 0.640445] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.641298] zbud: loaded
[ 0.641896] Key type asymmetric registered
[ 0.641907] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.641940] io scheduler noop registered
[ 0.641941] io scheduler deadline registered
[ 0.641964] io scheduler cfq registered (default)
[ 0.641965] io scheduler mq-deadline registered
[ 0.642869] vesafb: mode is 1600x900x32, linelength=6400, pages=0
[ 0.642869] vesafb: scrolling: redraw
[ 0.642870] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.642883] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001000000, using 5632k, total 5632k
[ 0.728523] Console: switching to colour frame buffer device 200x56
[ 0.813890] fb0: VESA VGA frame buffer device
[ 0.813901] intel_idle: MWAIT substates: 0x21120
[ 0.813901] intel_idle: v0.4.1 model 0x3A
[ 0.814038] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.814132] GHES: HEST is not enabled!
[ 0.814186] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.814606] Linux agpgart interface v0.103
[ 0.814859] rtc_cmos 00:02: RTC can wake from S4
[ 0.814983] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.815018] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.815026] intel_pstate: Intel P-state driver initializing
[ 0.815160] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.815492] NET: Registered protocol family 10
[ 0.820960] Segment Routing with IPv6
[ 0.820999] NET: Registered protocol family 17
[ 0.821556] microcode: sig=0x306a9, pf=0x10, revision=0x15
[ 0.821652] microcode: Microcode Update Driver: v2.2.
[ 0.821903] registered taskstats version 1
[ 0.821914] Loading compiled-in X.509 certificates
[ 0.821938] zswap: loaded using pool lzo/zbud
[ 0.822726] Magic number: 5:596:288
[ 0.822746] tty tty21: hash matches
[ 0.822842] rtc_cmos 00:02: setting system clock to 2017-06-01 17:17:08 UTC (1496337428)
[ 0.822939] PM: Hibernation image not present or could not be loaded.
[ 0.824843] Freeing unused kernel memory: 1304K
[ 0.824845] Write protecting the kernel read-only data: 10240k
[ 0.825603] Freeing unused kernel memory: 1696K
[ 0.825802] Freeing unused kernel memory: 32K
[ 0.838897] random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
[ 0.841564] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.841641] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.842952] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.842986] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.847621] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.847650] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.847660] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.848089] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.848124] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.869197] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.869755] i8042: Warning: Keylock active
[ 0.872354] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.872396] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.877372] ACPI: bus type USB registered
[ 0.877391] usbcore: registered new interface driver usbfs
[ 0.877400] usbcore: registered new interface driver hub
[ 0.877427] usbcore: registered new device driver usb
[ 0.878307] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.878558] ehci-pci: EHCI PCI platform driver
[ 0.878726] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.878733] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.878856] sdhci: Secure Digital Host Controller Interface driver
[ 0.878857] sdhci: Copyright(c) Pierre Ossman
[ 0.879123] sdhci-pci 0000:0b:00.0: SDHCI controller found [1217:8221] (rev 5)
[ 0.879524] mmc0: SDHCI controller on PCI [0000:0b:00.0] using DMA
[ 0.879832] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[ 0.879837] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.880130] SCSI subsystem initialized
[ 0.880244] hub 1-0:1.0: USB hub found
[ 0.880256] hub 1-0:1.0: 4 ports detected
[ 0.880562] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.880565] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.880677] hub 2-0:1.0: USB hub found
[ 0.880689] hub 2-0:1.0: 4 ports detected
[ 0.881101] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.881107] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.881121] ehci-pci 0000:00:1a.0: debug port 2
[ 0.883079] libata version 3.00 loaded.
[ 0.885040] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.885059] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f18000
[ 0.898368] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.901425] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.901743] hub 3-0:1.0: USB hub found
[ 0.901752] hub 3-0:1.0: 2 ports detected
[ 0.902083] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.902088] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.902101] ehci-pci 0000:00:1d.0: debug port 2
[ 0.905997] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.906015] ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7f17000
[ 0.918098] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.918478] hub 4-0:1.0: USB hub found
[ 0.918487] hub 4-0:1.0: 2 ports detected
[ 0.918688] ahci 0000:00:1f.2: version 3.0
[ 0.918980] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.930584] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x33 impl RAID mode
[ 0.930588] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[ 0.959318] scsi host0: ahci
[ 0.959558] scsi host1: ahci
[ 0.959809] scsi host2: ahci
[ 0.960066] scsi host3: ahci
[ 0.960458] scsi host4: ahci
[ 0.960625] scsi host5: ahci
[ 0.960698] ata1: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16100 irq 27
[ 0.960702] ata2: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16180 irq 27
[ 0.960703] ata3: DUMMY
[ 0.960704] ata4: DUMMY
[ 0.960707] ata5: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16300 irq 27
[ 0.960709] ata6: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16380 irq 27
[ 1.221522] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.238177] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.275913] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.278790] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.278795] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.278799] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.279439] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.282232] ata1.00: ATA-8: ST500LX003-1AC15G, DEM4, max UDMA/133
[ 1.282236] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.286171] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.286176] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.286179] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.286829] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.289609] ata1.00: configured for UDMA/133
[ 1.291355] scsi 0:0:0:0: Direct-Access ATA ST500LX003-1AC15 DEM4 PQ: 0 ANSI: 5
[ 1.359017] hub 3-1:1.0: USB hub found
[ 1.359949] hub 3-1:1.0: 6 ports detected
[ 1.375662] hub 4-1:1.0: USB hub found
[ 1.375774] hub 4-1:1.0: 8 ports detected
[ 1.641514] usb 3-1.2: new low-speed USB device number 3 using ehci-pci
[ 1.642383] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.650412] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.650418] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.650421] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.654274] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.654818] tsc: Refined TSC clocksource calibration: 2691.251 MHz
[ 1.654832] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26caf58cfb6, max_idle_ns: 440795236482 ns
[ 1.660026] ata2.00: ATAPI: TSSTcorp DVD-ROM SN-108DN, D100, max UDMA/100
[ 1.670726] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.670732] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.670735] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.674559] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1.680304] ata2.00: configured for UDMA/100
[ 1.692462] scsi 1:0:0:0: CD-ROM TSSTcorp DVD-ROM SN-108DN D100 PQ: 0 ANSI: 5
[ 1.745339] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.748059] usbcore: registered new interface driver usbhid
[ 1.748061] usbhid: USB HID core driver
[ 1.748970] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:275D:0BA6.0001/input/input2
[ 1.749052] hid-generic 0003:275D:0BA6.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:1a.0-1.2/input0
[ 1.814857] usb 3-1.4: new full-speed USB device number 4 using ehci-pci
[ 1.988194] usb 3-1.5: new high-speed USB device number 5 using ehci-pci
[ 2.022281] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.336008] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.342877] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 2.342880] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.342909] sd 0:0:0:0: [sda] Write Protect is off
[ 2.342913] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.342973] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.344556] sda: sda1 sda2 sda3 sda4
[ 2.345479] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.369753] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 2.369757] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.370147] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.374425] random: fast init done
[ 2.668506] clocksource: Switched to clocksource tsc
[ 2.897779] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.121057] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.364843] vboxdrv: loading out-of-tree module taints kernel.
[ 3.367109] vboxdrv: Found 4 processor cores
[ 3.373388] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[ 3.384965] vboxdrv: TSC mode is Invariant, tentative frequency 2691251789 Hz
[ 3.384967] vboxdrv: Successfully loaded version 5.1.22 (interface 0x00280000)
[ 3.388502] VBoxPciLinuxInit
[ 3.393346] vboxpci: IOMMU not found (not registered)
[ 3.471090] VBoxNetAdp: Successfully started.
[ 3.471880] VBoxNetFlt: Successfully started.
[ 3.999133] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 3.999138] ACPI: Lid Switch [LID0]
[ 3.999187] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 3.999190] ACPI: Power Button [PBTN]
[ 3.999231] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 3.999233] ACPI: Sleep Button [SBTN]
[ 3.999276] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 3.999278] ACPI: Power Button [PWRF]
[ 4.006899] parport_pc 00:07: [io 0x0378-0x037b]
[ 4.006915] parport_pc 00:07: [io 0x0278-0x027b]
[ 4.006927] parport_pc 00:07: [io 0x03bc-0x03bf]
[ 4.006938] parport_pc 00:07: [io 0x0378-0x037b]
[ 4.007108] parport_pc 00:07: [irq 7]
[ 4.008268] parport_pc 00:07: activated
[ 4.008270] parport_pc 00:07: reported by Plug and Play ACPI
[ 4.020760] ACPI: AC Adapter [AC] (on-line)
[ 4.053039] ACPI: Battery Slot [BAT0] (battery present)
[ 4.054066] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.065844] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 4.066130] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.066132] ACPI: Thermal Zone [THM] (68 C)
[ 4.082242] wmi: Mapper loaded
[ 4.178510] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 4.201387] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.205335] bcma: bus0: Found chip with id 43228, rev 0x00 and package 0x08
[ 4.205368] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0)
[ 4.205395] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0)
[ 4.205448] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x12, class 0x0)
[ 4.205474] bcma: bus0: Core 3 found: SDIO Device (manuf 0x4BF, id 0x829, rev 0x07, class 0x0)
[ 4.210104] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170119/utaddress-247)
[ 4.210113] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.210116] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170119/utaddress-247)
[ 4.210121] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.210122] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170119/utaddress-247)
[ 4.210125] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.210126] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170119/utaddress-247)
[ 4.210129] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.210129] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.210163] pps_core: LinuxPPS API ver. 1 registered
[ 4.210165] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.210781] PTP clock support registered
[ 4.215748] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 4.215844] tg3.c:v3.137 (May 11, 2014)
[ 4.218073] bcma: bus0: Bus registered
[ 4.232039] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 4.232040] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 4.232041] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 4.232042] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 4.252654] tg3 0000:0c:00.0 eth0: Tigon3 [partno(BCM95761) rev 5761100] (PCI Express) MAC address 74:86:7a:f6:90:0f
[ 4.252657] tg3 0000:0c:00.0 eth0: attached PHY is 5761 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 4.252659] tg3 0000:0c:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 4.252660] tg3 0000:0c:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.296157] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 4.296984] ppdev: user-space parallel port driver
[ 4.340117] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD93BXX: line_outs=1 (0xe/0x0/0x0/0x0/0x0) type:line
[ 4.340120] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[ 4.340122] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 4.340123] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 4.340124] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 4.340126] snd_hda_codec_idt hdaudioC0D0: Dock Mic=0xf
[ 4.340127] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
[ 4.340129] snd_hda_codec_idt hdaudioC0D0: Headset Mic=0xa
[ 4.378769] dell_wmi: Detected Dell WMI interface version 1
[ 4.378812] input: Dell WMI hotkeys as /devices/virtual/input/input14
[ 4.405275] [drm] Memory usable by graphics device = 2048M
[ 4.405278] checking generic (e0000000 580000) vs hw (e0000000 10000000)
[ 4.405278] fb: switching to inteldrmfb from VESA VGA
[ 4.405296] Console: switching to colour dummy device 80x25
[ 4.405369] [drm] Replacing VGA console driver
[ 4.411558] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.411560] [drm] Driver supports precise vblank timestamp query.
[ 4.413947] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.441868] dell_laptop: Using dell-rbtn acpi driver for receiving events
[ 4.497230] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0
[ 4.498455] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 4.498910] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[ 4.499030] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.499036] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0
[ 4.513845] iTCO_vendor_support: vendor-support=0
[ 4.514047] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.514426] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.514469] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 4.514607] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.514723] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.514758] input: HDA Intel PCH Headset Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.514792] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.514831] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 4.514896] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 4.515089] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 4.515122] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 4.533614] fbcon: inteldrmfb (fb0) is primary device
[ 4.601967] tg3 0000:0c:00.0 enp12s0: renamed from eth0
[ 4.606835] Adding 4194300k swap on /dev/sda2. Priority:-1 extents:1 across:4194300k FS
[ 4.640171] b43-phy0: Broadcom 43228 WLAN found (core revision 30)
[ 4.640580] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 16
[ 4.640590] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 9, Version 1
[ 4.641135] Broadcom 43xx driver loaded [ Features: PNLS ]
[ 4.654075] AVX version of gcm_enc/dec engaged.
[ 4.654075] AES CTR mode by8 optimization enabled
[ 5.047687] random: crng init done
[ 5.161767] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.162851] b43 bcma0:1 wlp2s0b1: renamed from wlan0
[ 5.223430] mousedev: PS/2 mouse device common for all mice
[ 5.228501] media: Linux media interface: v0.10
[ 5.232339] Linux video capture interface: v2.00
[ 5.242685] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_E4HD (0c45:643f)
[ 5.243763] intel_rapl: Found RAPL domain package
[ 5.243763] intel_rapl: Found RAPL domain core
[ 5.243764] intel_rapl: Found RAPL domain uncore
[ 5.243767] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 5.268694] uvcvideo 3-1.5:1.0: Entity type for entity Extension 4 was not initialized!
[ 5.268696] uvcvideo 3-1.5:1.0: Entity type for entity Extension 3 was not initialized!
[ 5.268697] uvcvideo 3-1.5:1.0: Entity type for entity Processing 2 was not initialized!
[ 5.268698] uvcvideo 3-1.5:1.0: Entity type for entity Camera 1 was not initialized!
[ 5.268798] input: Laptop_Integrated_Webcam_E4HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input19
[ 5.268910] usbcore: registered new interface driver uvcvideo
[ 5.268910] USB Video Class driver (1.1.1)
[ 5.277575] Bluetooth: Core ver 2.22
[ 5.277600] NET: Registered protocol family 31
[ 5.277602] Bluetooth: HCI device and connection manager initialized
[ 5.277606] Bluetooth: HCI socket layer initialized
[ 5.277609] Bluetooth: L2CAP socket layer initialized
[ 5.277617] Bluetooth: SCO socket layer initialized
[ 5.279309] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[ 5.284600] usbcore: registered new interface driver btusb
[ 5.398604] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7
[ 5.654424] Console: switching to colour frame buffer device 200x56
[ 5.724012] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.041890] IPv6: ADDRCONF(NETDEV_UP): enp12s0: link is not ready
[ 6.138396] IPv6: ADDRCONF(NETDEV_UP): enp12s0: link is not ready
[ 6.147369] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 6.305032] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 6.455603] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 6.665033] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 6.818385] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 7.018527] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 7.745662] tg3 0000:0c:00.0 enp12s0: Link is up at 100 Mbps, full duplex
[ 7.745673] tg3 0000:0c:00.0 enp12s0: Flow control is on for TX and on for RX
[ 7.745697] IPv6: ADDRCONF(NETDEV_CHANGE): enp12s0: link becomes ready
[ 214.974453] SUPR0GipMap: fGetGipCpu=0xb
[ 215.353955] vboxdrv: ffffffffa0b57020 VMMR0.r0
[ 215.553948] vboxdrv: ffffffffa06f5020 VBoxDDR0.r0
[ 351.253650] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 351.403699] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 667.274694] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 667.424764] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 983.305660] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 983.475663] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1251.465791] chrome[1945]: segfault at 968 ip 00007f9157070393 sp 00007fff969b3f20 error 4 in libX11.so.6.3.0[7f9157043000+139000]
[ 1299.279978] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 1299.440060] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1459.048634] chrome[2689]: segfault at 968 ip 00007f1ffdb10393 sp 00007fffcbac8ff0 error 4 in libX11.so.6.3.0[7f1ffdae3000+139000]
[ 1615.304288] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 1615.454378] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 1907.233198] chrome[3865]: segfault at 968 ip 00007f0176c73393 sp 00007ffd15195d30 error 4 in libX11.so.6.3.0[7f0176c46000+139000]
[ 1931.288520] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 1931.438563] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 2247.346251] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 2247.506357] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 2563.353814] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 2563.503898] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 2879.368212] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 2879.518304] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 3195.372471] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 3195.542552] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 3511.403456] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 3511.563612] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 3827.354397] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 3827.514550] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 4143.422076] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 4143.592229] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 4459.436416] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 4459.586530] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 4775.394031] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 4775.547427] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 5091.408334] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 5091.558436] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 5407.399334] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 5407.549406] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 5723.430312] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 5723.580451] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 6039.454683] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 6039.604768] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 6355.445664] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 6355.605757] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 6671.453282] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 6671.613387] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 6987.494233] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 6987.657652] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 7303.515176] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 7303.675275] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 7619.536168] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 7619.696274] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 7935.497230] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 7935.657328] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 8251.554839] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 8251.724880] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 8567.569126] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 8567.719202] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 8883.590175] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 8883.740242] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 9199.581152] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 9199.731165] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 9515.542131] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 9515.692420] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 9831.563061] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 9831.726542] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[10147.624038] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[10147.784108] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[10406.971329] perf: interrupt took too long (2523 > 2500), lowering kernel.perf_event_max_sample_rate to 79200
[10463.625011] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[10463.785060] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[10779.646093] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[10779.799445] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[11095.596971] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[11095.747030] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[11350.079106] b43-phy0 ERROR: MAC suspend failed
[11350.622469] b43-phy0 ERROR: MAC suspend failed
[11351.162556] b43-phy0 ERROR: MAC suspend failed
[11351.702503] b43-phy0 ERROR: MAC suspend failed
[11352.242547] b43-phy0 ERROR: MAC suspend failed
[11411.611298] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[11411.761371] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[11727.632274] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[11727.782330] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[12043.666606] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[12043.816723] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[12359.647623] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[12359.807722] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[12675.711883] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[12675.878610] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[12991.672901] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[12991.822926] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[13307.697231] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[13307.847329] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[13623.744801] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[13623.904890] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[13939.759148] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[13939.929250] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[14255.766843] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[14255.916903] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[14431.449021] perf: interrupt took too long (3171 > 3153), lowering kernel.perf_event_max_sample_rate to 63000
[14571.747780] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[14571.901247] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[14887.802136] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[14887.952217] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[15203.796421] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[15203.946531] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[15519.814068] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[15519.974145] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[15835.835057] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[15835.988392] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[16151.799311] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[16151.949350] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[16467.807037] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[16467.957129] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[16783.854688] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[16784.014779] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[17099.855673] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[17100.015761] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[17415.829951] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[17415.979994] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[17731.854288] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[17732.004271] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[18047.871937] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[18048.022028] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[18363.856231] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[18364.016276] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[18539.703335] perf: interrupt took too long (4004 > 3963), lowering kernel.perf_event_max_sample_rate to 49800
[18679.873873] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[18680.023988] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[18995.921548] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[18996.081639] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not readyLast edited by duskel (2017-06-01 22:45:17)
Offline
#6 2017-06-01 22:52:17
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,323
Re: [SOLVED] efi: EFI_MEMMAP is not enabled
That appears to be the dmesg output from the linux package not the linux-lts package. (linux 4.11.3 not linux 4.9.30)
Offline
#7 2017-06-01 22:57:46
- R00KIE
- Forum Fellow
- From: Between a computer and a chair
- Registered: 2008-09-14
- Posts: 4,734
Re: [SOLVED] efi: EFI_MEMMAP is not enabled
I think I've seen something along the same lines recently. The conclusion was broken bios which is exposing things it shouldn't and the solution/workaround was to boot in uefi mode.
I'll leave searching the forums as homework for the OP.
R00KIE
Tm90aGluZyB0byBzZWUgaGVyZSwgbW92ZSBhbG9uZy4K
Offline
#8 2017-06-02 09:19:51
- Vizitor
- Member
- Registered: 2015-01-05
- Posts: 81
Re: [SOLVED] efi: EFI_MEMMAP is not enabled
I have this two messages, too.
That started from kernel version 4.11; Kernel-lts 4.9.30 does not have those messages.
That is appearing when booting from Arch Linux on NVMe - bios mode - ( with ahci+gpt+grub+1MiB bios_grub partition on it ) .
Also, I have Arch Linux on same computer, different ssd, - efi mode - kernel 4.11.3 - and there is no such messages.
( there are also, on separated SSDs, Win7-mbr_installed and Win10 uefi_installed )
Selection of OS to boot is done by motherboard boot-menu (F8)
Offline
#9 2017-06-15 15:05:06
- duskel
- Member
- Registered: 2017-06-01
- Posts: 6
Re: [SOLVED] efi: EFI_MEMMAP is not enabled
Issue has been solved by kernel update (4.11.5-1-ARCH).
Thanks for your help.
Last edited by duskel (2017-06-15 15:05:24)
Offline
Pages: 1