You are not logged in.
- Topics: Active | Unanswered
#1 2017-06-20 13:45:36
- ddelpino
- Member
- Registered: 2011-03-07
- Posts: 22
[Solved] I can't set resolution 2560x1080
Hi
I have a "UltraWide" monitor LG 25UM58 connected through HDMI with a card AMD/ATI Turks XT [Radeon HD 6670/7670]. I am use the opensource ATI driver. But I must use in 1920x1080 resolution because when use the native 2560x1080 the image is very wrong:
CVT outputs:
cvt 2560 1080 60
# 2560x1080 59.98 Hz (CVT) hsync: 67.17 kHz; pclk: 230.00 MHz
Modeline "2560x1080_60.00" 230.00 2560 2720 2992 3424 1080 1083 1093 1120 -hsync +vsynccvt -r 2560 1080 60
# 2560x1080 59.98 Hz (CVT) hsync: 66.64 kHz; pclk: 181.25 MHz
Modeline "2560x1080R" 181.25 2560 2608 2640 2720 1080 1083 1093 1111 +hsync -vsyncMonitor Asset Manager Report of Windows:
Monitor Asset Manager Report, generated 16-06-2017
Copyright (c) 1995-2016, EnTech Taiwan.
---------------------------
Monitor #1 [Real-time 0x0051]
Model name............... LG ULTRAWIDE
Manufacturer............. LGE
Plug and Play ID......... GSM59F1
Serial number............ 123126
Manufacture date......... 2017, ISO week 3
Filter driver............ None
-------------------------
EDID revision............ 1.3
Input signal type........ Digital
Color bit depth.......... Undefined
Display type............. RGB color
Screen size.............. 670 x 280 mm (28,6 in)
Power management......... Standby, Suspend, Active off/sleep
Extension blocs.......... 1 (CEA-EXT)
-------------------------
DDC/CI................... Supported
MCCS revison............. 2.1
Display technology....... TFT
Controller............... Novatek 0x0
Firmware revision........ 3.1
Firmware flags........... 0x00000068
Active power on time..... 2 hours
Power consumption........ Not supported
Current frequency........ 66,60kHz, 60,00Hz
Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2,20
Red chromaticity......... Rx 0,651 - Ry 0,332
Green chromaticity....... Gx 0,307 - Gy 0,631
Blue chromaticity........ Bx 0,150 - By 0,060
White point (default).... Wx 0,313 - Wy 0,329
Additional descriptors... None
Timing characteristics
Horizontal scan range.... 30-90kHz
Vertical scan range...... 56-75Hz
Video bandwidth.......... 240MHz
CVT standard............. Not supported
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 2560x1080p at 60Hz
Modeline............... "2560x1080" 185,580 2560 2624 2688 2784 1080 1083 1093 1111 -hsync -vsync
Detailed timing #1....... 1920x1080p at 60Hz
Modeline............... "1920x1080" 148,500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
Standard timings supported
720 x 400p at 70Hz - IBM VGA
640 x 480p at 60Hz - IBM VGA
640 x 480p at 75Hz - VESA
800 x 600p at 60Hz - VESA
800 x 600p at 75Hz - VESA
1024 x 768p at 60Hz - VESA
1024 x 768p at 75Hz - VESA
1280 x 1024p at 75Hz - VESA
1152 x 870p at 75Hz - Apple Mac II
1152 x 864p at 75Hz - VESA STD
1280 x 1024p at 60Hz - VESA STD
1280 x 720p at 60Hz - VESA STD
1600 x 900p at 60Hz - VESA STD
1680 x 1050p at 60Hz - VESA STD
EIA/CEA-861 Information
Revision number.......... 3
IT underscan............. Supported
Basic audio.............. Supported
YCbCr 4:4:4.............. Supported
YCbCr 4:2:2.............. Supported
Native formats........... 1
Detailed timing #1....... 1920x1080p at 60Hz
Modeline............... "1920x1080" 148,500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
Detailed timing #2....... 1920x1080i at 60Hz
Modeline............... "1920x1080" 74,250 1920 2008 2052 2200 1080 1084 1094 1124 interlace +hsync +vsync
Detailed timing #3....... 1280x720p at 60Hz
Modeline............... "1280x720" 74,250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
Detailed timing #4....... 720x480p at 60Hz
Modeline............... "720x480" 27,000 720 736 798 858 480 489 495 525 -hsync -vsync
CE video identifiers (VICs) - timing/formats supported
1920 x 1080p at 60Hz - HDTV (16:9, 1:1) [Native]
1280 x 720p at 60Hz - HDTV (16:9, 1:1)
720 x 480p at 60Hz - EDTV (16:9, 32:27)
1920 x 1080i at 50Hz - HDTV (16:9, 1:1)
720 x 576p at 50Hz - EDTV (16:9, 64:45)
1920 x 1080i at 60Hz - HDTV (16:9, 1:1)
1920 x 1080p at 50Hz - HDTV (16:9, 1:1)
640 x 480p at 60Hz - Default (4:3, 1:1)
1280 x 720p at 50Hz - HDTV (16:9, 1:1)
NB: NTSC refresh rate = (Hz*1000)/1001
CE audio data (formats supported)
LPCM 2-channel, 16/20/24 bit depths at 32/44/48 kHz
CE speaker allocation data
Channel configuration.... 2.0
Front left/right......... Yes
Front LFE................ No
Front center............. No
Rear left/right.......... No
Rear center.............. No
Front left/right center.. No
Rear left/right center... No
Rear LFE................. No
CE vendor specific data (VSDB)
IEEE registration number. 0x000C03
CEC physical address..... 1.0.0.0
Maximum TMDS clock....... 165MHz
Report information
Date generated........... 16-06-2017
Software revision........ 2.90.0.1020
Data source.............. Real-time 0x0051
Operating system......... 6.3.9600.2With EDID information I created this configuration file in Xorg:
/etc/X11/xorg.conf.d/10-monitor.conf
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 30.0 - 90.0
VertRefresh 56.0 - 75.0
DisplaySize 670 280
Modeline "2560x1080_60.00" 185.580 2560 2624 2688 2784 1080 1083 1093 1111 -hsync -vsync
Option "PreferredMode" "2560x1080_60.00"
EndSection
Section "Device"
Identifier "Device0"
Driver "ati"
Option "Monitor-HDMI-0" "Monitor0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
EndSectionI cant use the propietary ATI driver because depends the Xorg <= v1.18.
Last edited by ddelpino (2017-06-29 03:34:15)
Offline
#2 2017-06-20 15:02:41
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,319
Re: [Solved] I can't set resolution 2560x1080
a) why do you need to add the mode explicitly?
What does your xorg log and "xrandr -q" look like w/o the explicit modeline?
b) try to disable hdmi audio:
xrandr --output HDMI-1 --auto --set audio offThis can also be achieved passing "amdgpu.audio=0" resp. "radeon.audio=0" to the kernel
Offline
#3 2017-06-20 15:10:36
- Lone_Wolf
- Forum Moderator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 11,925
Re: [Solved] I can't set resolution 2560x1080
connected through HDMI with a card AMD/ATI Turks XT [Radeon HD 6670/7670]
Wikipedia indicates 21:9 screens require HDMI 2 or later, https://en.wikipedia.org/wiki/HDMI#Version_2.0
AMD lists HDM 1.4a / 1920x1200 as max in the specs for your card, http://www.amd.com/en-us/products/graph … 6000/6670#
Maybe DisplayPort 1.2 does support this resolution / ratio , try connecting over DisplayPort.
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
(A works at time B) && (time C > time B ) ≠ (A works at time C)
Offline
#4 2017-06-20 15:18:12
- ddelpino
- Member
- Registered: 2011-03-07
- Posts: 22
Re: [Solved] I can't set resolution 2560x1080
Hi
a) If I not add mode explicitly is not detected.
xrandr -q output using 2560dx1080 resolution:
Screen 0: minimum 320 x 200, current 2560 x 1080, maximum 16384 x 16384
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected 2560x1080+0+0 (normal left inverted right x axis y axis) 673mm x 284mm
2560x1080_60.00 60.00*+
1920x1080 60.00 59.94
1920x1080i 60.00 59.94
1680x1050 59.88
1600x900 60.00
1280x1024 75.02 60.02
1152x864 75.00
1280x720 60.00 59.94
1024x768 75.03 60.00
800x600 75.00 60.32
720x480 60.00 59.94
640x480 75.00 60.00 59.94
720x400 70.08
DVI-0 disconnected (normal left inverted right x axis y axis)xrandr -q output using 1920x1080 resolution:
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 673mm x 284mm
2560x1080_60.00 60.00 +
1920x1080 60.00* 59.94
1920x1080i 60.00 59.94
1680x1050 59.88
1600x900 60.00
1280x1024 75.02 60.02
1152x864 75.00
1280x720 60.00 59.94
1024x768 75.03 60.00
800x600 75.00 60.32
720x480 60.00 59.94
640x480 75.00 60.00 59.94
720x400 70.08
DVI-0 disconnected (normal left inverted right x axis y axis)b)
Wow! after run "xrandr --output HDMI-0 --auto --set audio off" the resolution 2560x1980 is set automatically and looking good. But... the text is pixelated.
I put DPI at 120, 150 and 200 but is look it same.
Offline
#5 2017-06-20 15:24:23
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,319
Re: [Solved] I can't set resolution 2560x1080
Pic or it didn't happen (and I lack imagination of what "pixelated" could be here) - do you still have the expicit modeline around?
Also Lone_Wolf is right here: you're driving this borderline out-of-spec (actually it's out of spec) and DP or DVI should not cause such issues.
Offline
#6 2017-06-20 19:13:32
- ddelpino
- Member
- Registered: 2011-03-07
- Posts: 22
Re: [Solved] I can't set resolution 2560x1080
seth wrote:
do you still have the expicit modeline around?
If I not set a custom xorg configuration file, resolution 2560x1080 is not detected.
Lone_Wolf wrote:
Wikipedia indicates 21:9 screens require HDMI 2 or later, https://en.wikipedia.org/wiki/HDMI#Version_2.0
AMD lists HDM 1.4a / 1920x1200 as max in the specs for your card, http://www.amd.com/en-us/products/graph … 6000/6670#
Maybe DisplayPort 1.2 does support this resolution / ratio , try connecting over DisplayPort.
Hmm, maybe, but in Windows the 2560x1080 resolution is working without problems.
seth wrote:
Also Lone_Wolf is right here: you're driving this borderline out-of-spec (actually it's out of spec) and DP or DVI should not cause such issues.
I will try get a HDMI to DVI adapter...
For now the resolution is good but text is pixelated. I set DPI to 111 but not changes. I come back to 1920x1080. :-(
Last edited by ddelpino (2017-06-20 19:20:11)
Offline
#7 2017-06-20 19:49:48
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,319
Re: [Solved] I can't set resolution 2560x1080
Do you mind showing an image of the "pixelated" text? (Ideally a screenshot and no photo, higher resolution than in the OP - please you an image paste service for this, imgur or the like)
Offline
#8 2017-06-20 20:08:19
- ddelpino
- Member
- Registered: 2011-03-07
- Posts: 22
Re: [Solved] I can't set resolution 2560x1080
A screenshot is not show the pixelated text:
http://imgur.com/9hRAo9t
Only is appreciable with photos:
http://imgur.com/TOhlYgE
http://imgur.com/OTdiaIz
http://imgur.com/hLBEnNW
This photos are from XFCE but with Cinnamon occur it same
Last edited by ddelpino (2017-06-20 20:09:47)
Offline
#9 2017-06-20 21:01:53
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,319
Re: [Solved] I can't set resolution 2560x1080
Looks like subpixel hinting gone wrong - check your hinting, subpixel and lcd_filter configuration.
Offline
#10 2017-06-20 22:46:32
- ddelpino
- Member
- Registered: 2011-03-07
- Posts: 22
Re: [Solved] I can't set resolution 2560x1080
The problem is not only the text, look this image with Dia and Rdesktop:
Is unusable.
Offline
#11 2017-06-21 07:02:02
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,319
Re: [Solved] I can't set resolution 2560x1080
Then the bandwidth is still too high.
=> Try the reduced blanking modeline.
Also some amazon review says the monitor does 50Hz (over HDMI), so try such modelines as well.
Finally, are you dead sure about windows driving the output at this resolution? Because the "CE video identifiers (VICs) - timing/formats supported" you posted don't quite look so?
Offline
#12 2017-06-22 14:11:03
- Lone_Wolf
- Forum Moderator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 11,925
Re: [Solved] I can't set resolution 2560x1080
ddelpino wrote:
I will try get a HDMI to DVI adapter...
If those monitors only have hdmi inputs (the specs suggest that) , get a DVI or DP to hdmi adapter instead.
Incase your card handles the 21:9 resolution better, it will only work if you use the DP / DVI outputs of the card.
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
(A works at time B) && (time C > time B ) ≠ (A works at time C)
Offline
#13 2017-06-22 14:24:15
- ddelpino
- Member
- Registered: 2011-03-07
- Posts: 22
Re: [Solved] I can't set resolution 2560x1080
seth wrote:
Then the bandwidth is still too high.
=> Try the reduced blanking modeline.
Also some amazon review says the monitor does 50Hz (over HDMI), so try such modelines as well.
Finally, are you dead sure about windows driving the output at this resolution? Because the "CE video identifiers (VICs) - timing/formats supported" you posted don't quite look so?
I reduced blanking modeline configuring Xorg with the CVT data:
cvt -r 2560 1080 60
# 2560x1080 59.98 Hz (CVT) hsync: 66.64 kHz; pclk: 181.25 MHz
Modeline "2560x1080R" 181.25 2560 2608 2640 2720 1080 1083 1093 1111 +hsync -vsyncBut the result is the same.
I reduced the refresh rate to 50Hz:
cvt 2560 1080 50
# 2560x1080 49.95 Hz (CVT) hsync: 55.65 kHz; pclk: 188.75 MHz
Modeline "2560x1080_50.00" 188.75 2560 2712 2976 3392 1080 1083 1093 1114 -hsync +vsyncBut the result is the same.
I am very sure that Windows resolution is 2560x1080:
http://imgur.com/a/YD3bp
Lone_Wolf wrote:
If those monitors only have hdmi inputs (the specs suggest that) , get a DVI or DP to hdmi adapter instead.
Incase your card handles the 21:9 resolution better, it will only work if you use the DP / DVI outputs of the card.
Today I will buy this cable:
https://www.spdigital.cl/products/view/40438?ref=rr
And I will comment you the results.
Offline
#14 2017-06-22 22:03:52
- ddelpino
- Member
- Registered: 2011-03-07
- Posts: 22
Re: [Solved] I can't set resolution 2560x1080
I did not have luck, Xorg detects automatically the 2560x1080 resolution with this cable, I not need to customize xorg.conf. But... The image still is bad.
Do I will have to buy a new graphic card? I was thinking that Nvidia cards have better support for Linux, maybe that is the solution.
Last edited by ddelpino (2017-06-22 22:12:00)
Offline
#15 2017-06-23 11:08:43
- Lone_Wolf
- Forum Moderator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 11,925
Re: [Solved] I can't set resolution 2560x1080
Maybe not, we may have overlooked that you're running a hybrid graphics system.
Those tend to default to using the integrated (weakest) card.
post lspci -k , xorg log , xrandr --listproviders and glxinfo | grep -i renderer
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
(A works at time B) && (time C > time B ) ≠ (A works at time C)
Offline
#16 2017-06-23 11:16:12
- ddelpino
- Member
- Registered: 2011-03-07
- Posts: 22
Re: [Solved] I can't set resolution 2560x1080
lspci -k
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Complex
Subsystem: ASUSTeK Computer Inc. Device 84c8
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port
Kernel driver in use: pcieport
Kernel modules: shpchp
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port
Kernel driver in use: pcieport
Kernel modules: shpchp
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40)
Subsystem: ASUSTeK Computer Inc. Device 84f2
Kernel driver in use: ahci
Kernel modules: ahci
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
Subsystem: ASUSTeK Computer Inc. Device 84f2
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
Subsystem: ASUSTeK Computer Inc. Device 84f2
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
Subsystem: ASUSTeK Computer Inc. Device 84f2
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
Subsystem: ASUSTeK Computer Inc. Device 84f2
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 13)
Subsystem: ASUSTeK Computer Inc. Device 84f2
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4, sp5100_tco
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
Subsystem: ASUSTeK Computer Inc. Device 8445
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
Subsystem: ASUSTeK Computer Inc. Device 84f2
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
Subsystem: ASUSTeK Computer Inc. Device 84f2
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
Subsystem: ASUSTeK Computer Inc. Device 84f2
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
Subsystem: ASUSTeK Computer Inc. Device 84f2
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
01:00.0 USB controller: Renesas Technology Corp. uPD720201 USB 3.0 Host Controller (rev 03)
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Turks XT [Radeon HD 6670/7670]
Subsystem: PC Partner Limited / Sapphire Technology Device e194
Kernel driver in use: radeon
Kernel modules: radeon
02:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Turks HDMI Audio [Radeon HD 6500/6600 / 6700M Series]
Subsystem: PC Partner Limited / Sapphire Technology Device aa90
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
04:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
Subsystem: Qualcomm Atheros Device 3118
Kernel driver in use: ath9k
Kernel modules: ath9k
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
Subsystem: ASUSTeK Computer Inc. P8P67 and other motherboards
Kernel driver in use: r8169
Kernel modules: r8169Xorg.log
[ 94.344]
X.Org X Server 1.19.3
Release Date: 2017-03-15
[ 94.344] X Protocol Version 11, Revision 0
[ 94.344] Build Operating System: Linux 4.9.11-1-ARCH x86_64
[ 94.344] Current Operating System: Linux D_Arch 4.11.6-1-ARCH #1 SMP PREEMPT Sat Jun 17 08:19:42 CEST 2017 x86_64
[ 94.344] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f5516540-87ea-402e-8f88-4636feadf281 rw quiet ipv6.disable=1
[ 94.344] Build Date: 07 April 2017 05:42:48PM
[ 94.344]
[ 94.344] Current version of pixman: 0.34.0
[ 94.344] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 94.344] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 94.344] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 23 06:07:07 2017
[ 94.345] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 94.345] (==) No Layout section. Using the first Screen section.
[ 94.345] (==) No screen section available. Using defaults.
[ 94.345] (**) |-->Screen "Default Screen Section" (0)
[ 94.345] (**) | |-->Monitor "<default monitor>"
[ 94.346] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 94.346] (==) Automatically adding devices
[ 94.346] (==) Automatically enabling devices
[ 94.346] (==) Automatically adding GPU devices
[ 94.346] (==) Automatically binding GPU devices
[ 94.346] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 94.346] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 94.346] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 94.346] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 94.346] (II) Loader magic: 0x822d60
[ 94.346] (II) Module ABI versions:
[ 94.346] X.Org ANSI C Emulation: 0.4
[ 94.346] X.Org Video Driver: 23.0
[ 94.346] X.Org XInput driver : 24.1
[ 94.346] X.Org Server Extension : 10.0
[ 94.348] (++) using VT number 7
[ 94.348] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 94.349] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 94.355] (--) PCI:*(0:2:0:0) 1002:6758:174b:e194 rev 0, Mem @ 0xc0000000/268435456, 0xfe920000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 94.355] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 94.356] (II) LoadModule: "glx"
[ 94.356] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 94.357] (II) Module glx: vendor="X.Org Foundation"
[ 94.357] compiled for 1.19.3, module version = 1.0.0
[ 94.357] ABI class: X.Org Server Extension, version 10.0
[ 94.357] (II) Applying OutputClass "Radeon" to /dev/dri/card0
[ 94.357] loading driver: radeon
[ 94.357] (==) Matched radeon as autoconfigured driver 0
[ 94.357] (==) Matched ati as autoconfigured driver 1
[ 94.357] (==) Matched ati as autoconfigured driver 2
[ 94.357] (==) Matched modesetting as autoconfigured driver 3
[ 94.358] (==) Matched fbdev as autoconfigured driver 4
[ 94.358] (==) Matched vesa as autoconfigured driver 5
[ 94.358] (==) Assigned the driver to the xf86ConfigLayout
[ 94.358] (II) LoadModule: "radeon"
[ 94.358] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 94.358] (II) Module radeon: vendor="X.Org Foundation"
[ 94.358] compiled for 1.19.3, module version = 7.9.0
[ 94.358] Module class: X.Org Video Driver
[ 94.358] ABI class: X.Org Video Driver, version 23.0
[ 94.358] (II) LoadModule: "ati"
[ 94.358] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 94.358] (II) Module ati: vendor="X.Org Foundation"
[ 94.358] compiled for 1.19.3, module version = 7.9.0
[ 94.358] Module class: X.Org Video Driver
[ 94.358] ABI class: X.Org Video Driver, version 23.0
[ 94.423] (II) LoadModule: "modesetting"
[ 94.423] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 94.423] (II) Module modesetting: vendor="X.Org Foundation"
[ 94.423] compiled for 1.19.3, module version = 1.19.3
[ 94.423] Module class: X.Org Video Driver
[ 94.423] ABI class: X.Org Video Driver, version 23.0
[ 94.423] (II) LoadModule: "fbdev"
[ 94.424] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 94.424] (II) Module fbdev: vendor="X.Org Foundation"
[ 94.424] compiled for 1.19.0, module version = 0.4.4
[ 94.424] Module class: X.Org Video Driver
[ 94.424] ABI class: X.Org Video Driver, version 23.0
[ 94.424] (II) LoadModule: "vesa"
[ 94.424] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 94.424] (II) Module vesa: vendor="X.Org Foundation"
[ 94.424] compiled for 1.19.0, module version = 2.3.4
[ 94.424] Module class: X.Org Video Driver
[ 94.424] ABI class: X.Org Video Driver, version 23.0
[ 94.424] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
ATI Radeon 9800PRO, ATI Radeon 9800XT,
ATI Radeon Mobility 9600/9700 (M10/M11),
ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
ATI FireGL V3350, ATI Mobility Radeon X1450,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
ATI FireGL V3400, ATI Mobility FireGL V5250,
ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
MULLINS, KAVERI, HAWAII
[ 94.430] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 94.430] (II) FBDEV: driver for framebuffer: fbdev
[ 94.430] (II) VESA: driver for VESA chipsets: vesa
[ 94.431] (II) [KMS] Kernel modesetting enabled.
[ 94.431] (WW) Falling back to old probe method for modesetting
[ 94.431] (WW) Falling back to old probe method for fbdev
[ 94.431] (II) Loading sub module "fbdevhw"
[ 94.431] (II) LoadModule: "fbdevhw"
[ 94.431] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 94.432] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 94.432] compiled for 1.19.3, module version = 0.0.2
[ 94.432] ABI class: X.Org Video Driver, version 23.0
[ 94.432] (WW) Falling back to old probe method for vesa
[ 94.432] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 94.432] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 94.432] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 94.432] (==) RADEON(0): Default visual is TrueColor
[ 94.432] (==) RADEON(0): RGB weight 888
[ 94.432] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 94.432] (--) RADEON(0): Chipset: "TURKS" (ChipID = 0x6758)
[ 94.433] (II) Loading sub module "fb"
[ 94.433] (II) LoadModule: "fb"
[ 94.433] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 94.433] (II) Module fb: vendor="X.Org Foundation"
[ 94.433] compiled for 1.19.3, module version = 1.0.0
[ 94.433] ABI class: X.Org ANSI C Emulation, version 0.4
[ 94.433] (II) Loading sub module "dri2"
[ 94.433] (II) LoadModule: "dri2"
[ 94.433] (II) Module "dri2" already built-in
[ 94.433] (II) Loading sub module "glamoregl"
[ 94.433] (II) LoadModule: "glamoregl"
[ 94.434] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 94.436] (II) Module glamoregl: vendor="X.Org Foundation"
[ 94.436] compiled for 1.19.3, module version = 1.0.0
[ 94.436] ABI class: X.Org ANSI C Emulation, version 0.4
[ 94.436] (II) glamor: OpenGL accelerated X.org driver based.
[ 94.531] (II) glamor: EGL version 1.4 (DRI2):
[ 94.537] (II) RADEON(0): glamor detected, initialising EGL layer.
[ 94.537] (II) RADEON(0): KMS Color Tiling: enabled
[ 94.537] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 94.537] (==) RADEON(0): TearFree property default: auto
[ 94.537] (II) RADEON(0): KMS Pageflipping: enabled
[ 94.565] (II) RADEON(0): Output DisplayPort-0 has no monitor section
[ 94.627] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 94.640] (II) RADEON(0): Output DVI-0 has no monitor section
[ 94.669] (II) RADEON(0): EDID for output DisplayPort-0
[ 94.730] (II) RADEON(0): EDID for output HDMI-0
[ 94.730] (II) RADEON(0): Manufacturer: GSM Model: 59f1 Serial#: 123126
[ 94.730] (II) RADEON(0): Year: 2017 Week: 3
[ 94.730] (II) RADEON(0): EDID Version: 1.3
[ 94.730] (II) RADEON(0): Digital Display Input
[ 94.730] (II) RADEON(0): Max Image Size [cm]: horiz.: 67 vert.: 28
[ 94.730] (II) RADEON(0): Gamma: 2.20
[ 94.730] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
[ 94.730] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 94.731] (II) RADEON(0): First detailed timing is preferred mode
[ 94.731] (II) RADEON(0): redX: 0.651 redY: 0.332 greenX: 0.307 greenY: 0.631
[ 94.731] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 94.731] (II) RADEON(0): Supported established timings:
[ 94.731] (II) RADEON(0): 720x400@70Hz
[ 94.731] (II) RADEON(0): 640x480@60Hz
[ 94.731] (II) RADEON(0): 640x480@75Hz
[ 94.731] (II) RADEON(0): 800x600@60Hz
[ 94.731] (II) RADEON(0): 800x600@75Hz
[ 94.731] (II) RADEON(0): 1024x768@60Hz
[ 94.731] (II) RADEON(0): 1024x768@75Hz
[ 94.731] (II) RADEON(0): 1280x1024@75Hz
[ 94.731] (II) RADEON(0): 1152x864@75Hz
[ 94.731] (II) RADEON(0): Manufacturer's mask: 0
[ 94.731] (II) RADEON(0): Supported standard timings:
[ 94.731] (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 94.731] (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 94.731] (II) RADEON(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 94.731] (II) RADEON(0): #3: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 94.731] (II) RADEON(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 94.731] (II) RADEON(0): Supported detailed timing:
[ 94.731] (II) RADEON(0): clock: 185.6 MHz Image Size: 673 x 284 mm
[ 94.731] (II) RADEON(0): h_active: 2560 h_sync: 2624 h_sync_end 2688 h_blank_end 2784 h_border: 0
[ 94.731] (II) RADEON(0): v_active: 1080 v_sync: 1083 v_sync_end 1093 v_blanking: 1111 v_border: 0
[ 94.731] (II) RADEON(0): Supported detailed timing:
[ 94.731] (II) RADEON(0): clock: 148.5 MHz Image Size: 673 x 284 mm
[ 94.731] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 94.731] (II) RADEON(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 94.731] (II) RADEON(0): Monitor name: LG ULTRAWIDE
[ 94.731] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 90 kHz, PixClock max 245 MHz
[ 94.731] (II) RADEON(0): Supported detailed timing:
[ 94.731] (II) RADEON(0): clock: 148.5 MHz Image Size: 598 x 337 mm
[ 94.731] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 94.731] (II) RADEON(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 94.731] (II) RADEON(0): Supported detailed timing:
[ 94.731] (II) RADEON(0): clock: 74.2 MHz Image Size: 598 x 337 mm
[ 94.731] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 94.731] (II) RADEON(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 94.731] (II) RADEON(0): Supported detailed timing:
[ 94.731] (II) RADEON(0): clock: 74.2 MHz Image Size: 598 x 337 mm
[ 94.731] (II) RADEON(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 94.731] (II) RADEON(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 94.731] (II) RADEON(0): Supported detailed timing:
[ 94.731] (II) RADEON(0): clock: 27.0 MHz Image Size: 598 x 337 mm
[ 94.731] (II) RADEON(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 94.731] (II) RADEON(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 94.731] (II) RADEON(0): Serial No: 703NTRL3M126
[ 94.731] (II) RADEON(0): Number of EDID sections to follow: 1
[ 94.731] (II) RADEON(0): EDID (in hex):
[ 94.731] (II) RADEON(0): 00ffffffffffff001e6df159f6e00100
[ 94.731] (II) RADEON(0): 031b010380431c78eaca95a6554ea126
[ 94.731] (II) RADEON(0): 0f5054a54b80714f818081c0a9c0b300
[ 94.731] (II) RADEON(0): 0101010101017e4800e0a0381f404040
[ 94.731] (II) RADEON(0): 3a00a11c21000018023a801871382d40
[ 94.731] (II) RADEON(0): 582c4500a11c2100001e000000fc004c
[ 94.731] (II) RADEON(0): 4720554c545241574944450a000000fd
[ 94.731] (II) RADEON(0): 00384b1e5a18000a20202020202001c0
[ 94.731] (II) RADEON(0): 02031cf1499004031412051f01132309
[ 94.731] (II) RADEON(0): 07078301000065030c001000023a8018
[ 94.731] (II) RADEON(0): 71382d40582c450056512100001e011d
[ 94.731] (II) RADEON(0): 8018711c1620582c250056512100009e
[ 94.731] (II) RADEON(0): 011d007251d01e206e28550056512100
[ 94.731] (II) RADEON(0): 001e8c0ad08a20e02d10103e96005651
[ 94.731] (II) RADEON(0): 21000018000000ff003730334e54524c
[ 94.731] (II) RADEON(0): 334d3132360a000000000000000000a0
[ 94.731] (II) RADEON(0): Printing probed modes for output HDMI-0
[ 94.732] (II) RADEON(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 94.732] (II) RADEON(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 94.732] (II) RADEON(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 94.732] (II) RADEON(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 94.732] (II) RADEON(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 94.732] (II) RADEON(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 94.732] (II) RADEON(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 94.732] (II) RADEON(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 94.732] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 94.732] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 94.732] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 94.732] (II) RADEON(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 94.732] (II) RADEON(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 94.732] (II) RADEON(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 94.732] (II) RADEON(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 94.732] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 94.732] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 94.732] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 94.732] (II) RADEON(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 94.732] (II) RADEON(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 94.732] (II) RADEON(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 94.732] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 94.732] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 94.732] (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 94.732] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 94.747] (II) RADEON(0): EDID for output DVI-0
[ 94.747] (II) RADEON(0): Output DisplayPort-0 disconnected
[ 94.747] (II) RADEON(0): Output HDMI-0 connected
[ 94.747] (II) RADEON(0): Output DVI-0 disconnected
[ 94.747] (II) RADEON(0): Using exact sizes for initial modes
[ 94.747] (II) RADEON(0): Output HDMI-0 using initial mode 1152x864 +0+0
[ 94.747] (II) RADEON(0): mem size init: gart size :3fdde000 vram size: s:40000000 visible:ec44000
[ 94.747] (==) RADEON(0): DPI set to (96, 96)
[ 94.747] (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
[ 94.747] (II) Loading sub module "ramdac"
[ 94.747] (II) LoadModule: "ramdac"
[ 94.747] (II) Module "ramdac" already built-in
[ 94.747] (II) UnloadModule: "modesetting"
[ 94.747] (II) Unloading modesetting
[ 94.747] (II) UnloadModule: "fbdev"
[ 94.747] (II) Unloading fbdev
[ 94.747] (II) UnloadSubModule: "fbdevhw"
[ 94.747] (II) Unloading fbdevhw
[ 94.747] (II) UnloadModule: "vesa"
[ 94.747] (II) Unloading vesa
[ 94.747] (--) Depth 24 pixmap format is 32 bpp
[ 94.747] (II) RADEON(0): [DRI2] Setup complete
[ 94.747] (II) RADEON(0): [DRI2] DRI driver: r600
[ 94.747] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 94.748] (II) RADEON(0): Front buffer size: 4032K
[ 94.748] (II) RADEON(0): VRAM usage limit set to 214027K
[ 94.748] (II) RADEON(0): SYNC extension fences enabled
[ 94.748] (II) RADEON(0): Present extension enabled
[ 94.748] (==) RADEON(0): DRI3 enabled
[ 94.748] (==) RADEON(0): Backing store enabled
[ 94.748] (II) RADEON(0): Direct rendering enabled
[ 94.752] (II) RADEON(0): Use GLAMOR acceleration.
[ 94.752] (II) RADEON(0): Acceleration enabled
[ 94.752] (==) RADEON(0): DPMS enabled
[ 94.752] (==) RADEON(0): Silken mouse enabled
[ 94.752] (II) RADEON(0): Set up textured video (glamor)
[ 94.752] (II) RADEON(0): [XvMC] Associated with GLAMOR Textured Video.
[ 94.753] (II) RADEON(0): [XvMC] Extension initialized.
[ 94.753] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 94.754] (--) RandR disabled
[ 94.769] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 94.769] (II) AIGLX: enabled GLX_ARB_create_context
[ 94.769] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 94.769] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 94.769] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 94.769] (II) AIGLX: enabled GLX_SGI_swap_control
[ 94.769] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 94.769] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 94.769] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 94.769] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 94.769] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 94.772] (II) AIGLX: Loaded and initialized r600
[ 94.772] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 94.776] (II) RADEON(0): Setting screen physical size to 304 x 228
[ 94.986] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 94.986] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 94.986] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 94.986] (II) LoadModule: "libinput"
[ 94.987] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 94.990] (II) Module libinput: vendor="X.Org Foundation"
[ 94.990] compiled for 1.19.3, module version = 0.25.1
[ 94.990] Module class: X.Org XInput Driver
[ 94.991] ABI class: X.Org XInput driver, version 24.1
[ 94.991] (II) Using input driver 'libinput' for 'Power Button'
[ 94.991] (**) Power Button: always reports core events
[ 94.991] (**) Option "Device" "/dev/input/event5"
[ 94.991] (**) Option "_source" "server/udev"
[ 94.992] (II) event5 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 94.992] (II) event5 - (II) Power Button: (II) device is a keyboard
[ 94.992] (II) event5 - (II) Power Button: (II) device removed
[ 95.013] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 95.013] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 95.015] (II) event5 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 95.015] (II) event5 - (II) Power Button: (II) device is a keyboard
[ 95.016] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 95.016] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 95.016] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 95.016] (II) Using input driver 'libinput' for 'Power Button'
[ 95.016] (**) Power Button: always reports core events
[ 95.016] (**) Option "Device" "/dev/input/event4"
[ 95.016] (**) Option "_source" "server/udev"
[ 95.017] (II) event4 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 95.017] (II) event4 - (II) Power Button: (II) device is a keyboard
[ 95.017] (II) event4 - (II) Power Button: (II) device removed
[ 95.043] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event4"
[ 95.043] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 95.044] (II) event4 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 95.044] (II) event4 - (II) Power Button: (II) device is a keyboard
[ 95.046] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event6)
[ 95.046] (II) No input driver specified, ignoring this device.
[ 95.046] (II) This device may have been added with another device file.
[ 95.047] (II) config/udev: Adding input device USB AUDIO (/dev/input/event1)
[ 95.047] (**) USB AUDIO : Applying InputClass "evdev keyboard catchall"
[ 95.047] (**) USB AUDIO : Applying InputClass "libinput keyboard catchall"
[ 95.047] (II) Using input driver 'libinput' for 'USB AUDIO '
[ 95.047] (**) USB AUDIO : always reports core events
[ 95.047] (**) Option "Device" "/dev/input/event1"
[ 95.047] (**) Option "_source" "server/udev"
[ 95.048] (II) event1 - (II) USB AUDIO : (II) is tagged by udev as: Keyboard
[ 95.048] (II) event1 - (II) USB AUDIO : (II) device is a keyboard
[ 95.048] (II) event1 - (II) USB AUDIO : (II) device removed
[ 95.093] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb6/6-3/6-3:1.2/0003:1130:1620.0001/input/input1/event1"
[ 95.093] (II) XINPUT: Adding extended input device "USB AUDIO " (type: KEYBOARD, id 8)
[ 95.094] (II) event1 - (II) USB AUDIO : (II) is tagged by udev as: Keyboard
[ 95.095] (II) event1 - (II) USB AUDIO : (II) device is a keyboard
[ 95.096] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 95.096] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 95.096] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[ 95.096] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 95.096] (**) Logitech USB Receiver: always reports core events
[ 95.096] (**) Option "Device" "/dev/input/event2"
[ 95.096] (**) Option "_source" "server/udev"
[ 95.097] (II) event2 - (II) Logitech USB Receiver: (II) is tagged by udev as: Keyboard
[ 95.097] (II) event2 - (II) Logitech USB Receiver: (II) device is a keyboard
[ 95.097] (II) event2 - (II) Logitech USB Receiver: (II) device removed
[ 95.153] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb7/7-2/7-2:1.0/0003:046D:C534.0002/input/input2/event2"
[ 95.153] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 95.155] (II) event2 - (II) Logitech USB Receiver: (II) is tagged by udev as: Keyboard
[ 95.155] (II) event2 - (II) Logitech USB Receiver: (II) device is a keyboard
[ 95.156] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[ 95.156] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 95.156] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 95.156] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[ 95.156] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[ 95.156] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 95.156] (**) Logitech USB Receiver: always reports core events
[ 95.156] (**) Option "Device" "/dev/input/event3"
[ 95.156] (**) Option "_source" "server/udev"
[ 95.158] (II) event3 - (II) Logitech USB Receiver: (II) is tagged by udev as: Keyboard Mouse
[ 95.158] (II) event3 - (II) Logitech USB Receiver: (II) device is a pointer
[ 95.158] (II) event3 - (II) Logitech USB Receiver: (II) device is a keyboard
[ 95.158] (II) event3 - (II) Logitech USB Receiver: (II) device removed
[ 95.203] (II) libinput: Logitech USB Receiver: needs a virtual subdevice
[ 95.203] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb7/7-2/7-2:1.1/0003:046D:C534.0003/input/input3/event3"
[ 95.203] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 95.204] (**) Option "AccelerationScheme" "none"
[ 95.204] (**) Logitech USB Receiver: (accel) selected scheme none/0
[ 95.204] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 95.204] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 95.205] (II) event3 - (II) Logitech USB Receiver: (II) is tagged by udev as: Keyboard Mouse
[ 95.205] (II) event3 - (II) Logitech USB Receiver: (II) device is a pointer
[ 95.205] (II) event3 - (II) Logitech USB Receiver: (II) device is a keyboard
[ 95.207] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 95.207] (II) No input driver specified, ignoring this device.
[ 95.207] (II) This device may have been added with another device file.
[ 95.208] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event10)
[ 95.208] (II) No input driver specified, ignoring this device.
[ 95.208] (II) This device may have been added with another device file.
[ 95.208] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event11)
[ 95.208] (II) No input driver specified, ignoring this device.
[ 95.209] (II) This device may have been added with another device file.
[ 95.209] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event7)
[ 95.209] (II) No input driver specified, ignoring this device.
[ 95.209] (II) This device may have been added with another device file.
[ 95.210] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event8)
[ 95.210] (II) No input driver specified, ignoring this device.
[ 95.210] (II) This device may have been added with another device file.
[ 95.211] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event9)
[ 95.211] (II) No input driver specified, ignoring this device.
[ 95.211] (II) This device may have been added with another device file.
[ 95.212] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event13)
[ 95.212] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 95.212] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 95.212] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[ 95.212] (**) Eee PC WMI hotkeys: always reports core events
[ 95.212] (**) Option "Device" "/dev/input/event13"
[ 95.212] (**) Option "_source" "server/udev"
[ 95.213] (II) event13 - (II) Eee PC WMI hotkeys: (II) is tagged by udev as: Keyboard
[ 95.213] (II) event13 - (II) Eee PC WMI hotkeys: (II) device is a keyboard
[ 95.213] (II) event13 - (II) Eee PC WMI hotkeys: (II) device removed
[ 95.233] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input13/event13"
[ 95.233] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[ 95.234] (II) event13 - (II) Eee PC WMI hotkeys: (II) is tagged by udev as: Keyboard
[ 95.234] (II) event13 - (II) Eee PC WMI hotkeys: (II) device is a keyboard
[ 95.235] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 95.235] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 95.235] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 95.235] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 95.235] (**) AT Translated Set 2 keyboard: always reports core events
[ 95.236] (**) Option "Device" "/dev/input/event0"
[ 95.236] (**) Option "_source" "server/udev"
[ 95.236] (II) event0 - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 95.236] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 95.236] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device removed
[ 95.293] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 95.293] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 95.294] (II) event0 - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 95.294] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 95.295] (II) config/udev: Adding input device PC Speaker (/dev/input/event12)
[ 95.295] (II) No input driver specified, ignoring this device.
[ 95.295] (II) This device may have been added with another device file.
[ 95.305] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 95.305] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 95.305] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[ 95.305] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[ 95.305] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 95.305] (**) Logitech USB Receiver: always reports core events
[ 95.305] (**) Option "Device" "/dev/input/event3"
[ 95.305] (**) Option "_source" "_driver/libinput"
[ 95.305] (II) libinput: Logitech USB Receiver: is a virtual subdevice
[ 95.305] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb7/7-2/7-2:1.1/0003:046D:C534.0003/input/input3/event3"
[ 95.305] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 13)
[ 114.584] (II) RADEON(0): EDID vendor "GSM", prod id 23025
[ 114.584] (II) RADEON(0): Using EDID range info for horizontal sync
[ 114.584] (II) RADEON(0): Using EDID range info for vertical refresh
[ 114.584] (II) RADEON(0): Printing DDC gathered Modelines:
[ 114.584] (II) RADEON(0): Modeline "2560x1080"x0.0 185.58 2560 2624 2688 2784 1080 1083 1093 1111 -hsync -vsync (66.7 kHz eP)
[ 114.584] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 114.584] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 114.584] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 114.584] (II) RADEON(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 114.584] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 114.584] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 114.584] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 114.584] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 114.584] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 114.584] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 114.584] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 114.584] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 114.584] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 114.584] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 114.584] (II) RADEON(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 114.584] (II) RADEON(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
[ 114.584] (II) RADEON(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 114.584] (II) RADEON(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 114.584] (II) RADEON(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 114.584] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 114.584] (II) RADEON(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 114.584] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 114.584] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 114.615] (II) RADEON(0): Allocate new frame buffer 1920x1080 stride 1920
[ 114.618] (II) RADEON(0): VRAM usage limit set to 209880K
[ 120.141] (II) RADEON(0): EDID vendor "GSM", prod id 23025
[ 120.141] (II) RADEON(0): Using hsync ranges from config file
[ 120.141] (II) RADEON(0): Using vrefresh ranges from config file
[ 120.141] (II) RADEON(0): Printing DDC gathered Modelines:
[ 120.141] (II) RADEON(0): Modeline "2560x1080"x0.0 185.58 2560 2624 2688 2784 1080 1083 1093 1111 -hsync -vsync (66.7 kHz eP)
[ 120.141] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 120.141] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 120.141] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 120.141] (II) RADEON(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 120.141] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 120.141] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 120.141] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 120.141] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 120.141] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 120.141] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 120.141] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 120.141] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 120.141] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 120.141] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 120.141] (II) RADEON(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 120.141] (II) RADEON(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
[ 120.141] (II) RADEON(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 120.141] (II) RADEON(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 120.141] (II) RADEON(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 120.141] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 120.141] (II) RADEON(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 120.141] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 120.141] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 120.400] (II) RADEON(0): EDID vendor "GSM", prod id 23025
[ 120.400] (II) RADEON(0): Using hsync ranges from config file
[ 120.400] (II) RADEON(0): Using vrefresh ranges from config file
[ 120.400] (II) RADEON(0): Printing DDC gathered Modelines:
[ 120.400] (II) RADEON(0): Modeline "2560x1080"x0.0 185.58 2560 2624 2688 2784 1080 1083 1093 1111 -hsync -vsync (66.7 kHz eP)
[ 120.400] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 120.400] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 120.400] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 120.400] (II) RADEON(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 120.400] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 120.400] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 120.400] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 120.400] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 120.400] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 120.400] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 120.400] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 120.400] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 120.400] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 120.400] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 120.400] (II) RADEON(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 120.400] (II) RADEON(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
[ 120.400] (II) RADEON(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 120.400] (II) RADEON(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 120.400] (II) RADEON(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 120.400] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 120.400] (II) RADEON(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 120.400] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 120.400] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 294.516] (II) RADEON(0): EDID vendor "GSM", prod id 23025
[ 294.516] (II) RADEON(0): Using hsync ranges from config file
[ 294.516] (II) RADEON(0): Using vrefresh ranges from config file
[ 294.516] (II) RADEON(0): Printing DDC gathered Modelines:
[ 294.516] (II) RADEON(0): Modeline "2560x1080"x0.0 185.58 2560 2624 2688 2784 1080 1083 1093 1111 -hsync -vsync (66.7 kHz eP)
[ 294.516] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 294.516] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 294.516] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 294.516] (II) RADEON(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 294.517] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 294.517] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 294.517] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 294.517] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 294.517] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 294.517] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 294.517] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 294.517] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 294.517] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 294.517] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 294.517] (II) RADEON(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 294.517] (II) RADEON(0): Modeline "1600x900"x60.0 119.00 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz e)
[ 294.517] (II) RADEON(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 294.517] (II) RADEON(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 294.517] (II) RADEON(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 294.517] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 294.517] (II) RADEON(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 294.517] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 294.517] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 446.288] (II) config/udev: Adding input device 00:0D:FD:36:3E:23 (/dev/input/event14)
[ 446.289] (**) 00:0D:FD:36:3E:23: Applying InputClass "evdev keyboard catchall"
[ 446.289] (**) 00:0D:FD:36:3E:23: Applying InputClass "libinput keyboard catchall"
[ 446.289] (II) Using input driver 'libinput' for '00:0D:FD:36:3E:23'
[ 446.289] (**) 00:0D:FD:36:3E:23: always reports core events
[ 446.289] (**) Option "Device" "/dev/input/event14"
[ 446.289] (**) Option "_source" "server/udev"
[ 446.290] (II) event14 - (II) 00:0D:FD:36:3E:23: (II) is tagged by udev as: Keyboard
[ 446.290] (II) event14 - (II) 00:0D:FD:36:3E:23: (II) device is a keyboard
[ 446.290] (II) event14 - (II) 00:0D:FD:36:3E:23: (II) device removed
[ 446.323] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event14"
[ 446.323] (II) XINPUT: Adding extended input device "00:0D:FD:36:3E:23" (type: KEYBOARD, id 14)
[ 446.325] (II) event14 - (II) 00:0D:FD:36:3E:23: (II) is tagged by udev as: Keyboard
[ 446.325] (II) event14 - (II) 00:0D:FD:36:3E:23: (II) device is a keyboard
[ 741.258] (II) config/udev: removing device 00:0D:FD:36:3E:23
[ 741.259] (II) event14 - (II) 00:0D:FD:36:3E:23: (II) device removed
[ 741.274] (II) UnloadModule: "libinput"xrandr --listproviders
Providers: number : 1
Provider 0: id: 0x58 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 6 outputs: 3 associated providers: 0 name:TURKS @ pci:0000:02:00.0glxinfo | grep -i renderer
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
Extended renderer info (GLX_MESA_query_renderer):
OpenGL renderer string: Gallium 0.4 on AMD TURKS (DRM 2.49.0 / 4.11.6-1-ARCH, LLVM 4.0.0)Last edited by ddelpino (2017-06-23 11:17:30)
Offline
#17 2017-06-24 13:16:14
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,319
Re: [Solved] I can't set resolution 2560x1080
Try 30Hz or 24Hz (w/o the adapter) and check whether the monitor accepts that frequency - just to see whether this is actually a bandwidth problem.
Just to be very sure: it's oc the same HW (Tv + Cable) on windows, yesno? (Please say no ;-)
Offline
#18 2017-06-29 03:33:28
- ddelpino
- Member
- Registered: 2011-03-07
- Posts: 22
Re: [Solved] I can't set resolution 2560x1080
Finally, I did buy a Nvidia card and the problem is resolved immediately. The open source ATI driver was the problem.
Offline
#19 2017-06-29 10:52:22
- Lone_Wolf
- Forum Moderator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 11,925
Re: [Solved] I can't set resolution 2560x1080
Nope, trying to drive a card outside of spec was the problem.
Good luck with your nvidia card.
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
(A works at time B) && (time C > time B ) ≠ (A works at time C)
Offline
#20 2017-06-29 12:17:31
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,319
Re: [Solved] I can't set resolution 2560x1080
To find a middle ground: at least the (windows) catalyst driver seems to be capable of tweaking this - though I would have bet it simply turns off the audio (notably since it "almost" worked with deactivated audio)
In case you want to revive the card (somehow) on HDMI, I just looked at https://www.spdigital.cl/products/view/40438?ref=rr and it clearly states to only support 1080p (so would fail) - you'll need sth. like a DP -> HDMI 2.0 converter. Sorry that I didn't look before :-\
Offline
#21 2017-06-29 22:55:14
- NoSuck
- Member
- Registered: 2015-03-04
- Posts: 157
- Website
Re: [Solved] I can't set resolution 2560x1080
Haha, this may be the most depressing [Solved] I've ever seen.
Offline