You are not logged in.
- Topics: Active | Unanswered
#1 2017-07-22 06:01:52
- sokl
- Member
- Registered: 2015-02-02
- Posts: 11
[SOLVED] Laptop freezes when starting or using GUI.
About 10yo laptop, for some time was used with Windows with no problems. Just installed arch and it freezes within 1 to 30 mins after reboot.
Most frequently it freezes when starting Firefox or Chromium, but also just in the middle of browsing.
Freezes are completely non-responsive.
Use Openbox.
journalctl
Jul 22 07:41:37 host kernel: pciehp 0000:00:01.0:pcie004: Slot(0): Card present
Jul 22 07:41:38 host kernel: pci 0000:06:00.0: [10de:06e9] type 00 class 0x030000
Jul 22 07:41:38 host kernel: pci 0000:06:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
Jul 22 07:41:38 host kernel: pci 0000:06:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
Jul 22 07:41:38 host kernel: pci 0000:06:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
Jul 22 07:41:38 host kernel: pci 0000:06:00.0: reg 0x24: [io 0xec00-0xec7f]
Jul 22 07:41:38 host kernel: pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
Jul 22 07:41:38 host kernel: pci 0000:06:00.0: vgaarb: setting as boot VGA device
Jul 22 07:41:38 host kernel: pci 0000:06:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
Jul 22 07:41:38 host kernel: pci 0000:06:00.0: BAR 1: assigned [mem 0xd0000000-0xdfffffff 64bit pref]
Jul 22 07:41:38 host kernel: pci 0000:06:00.0: BAR 3: assigned [mem 0xfa000000-0xfbffffff 64bit]
Jul 22 07:41:38 host kernel: pci 0000:06:00.0: BAR 0: assigned [mem 0xfc000000-0xfcffffff]
Jul 22 07:41:38 host kernel: pci 0000:06:00.0: BAR 6: assigned [mem 0xfd000000-0xfd01ffff pref]
Jul 22 07:41:38 host kernel: pci 0000:06:00.0: BAR 5: assigned [io 0xe000-0xe07f]
Jul 22 07:41:38 host kernel: pcieport 0000:00:01.0: PCI bridge to [bus 06]
Jul 22 07:41:38 host kernel: pcieport 0000:00:01.0: bridge window [io 0xe000-0xefff]
Jul 22 07:41:38 host kernel: pcieport 0000:00:01.0: bridge window [mem 0xfa000000-0xfebfffff]
Jul 22 07:41:38 host kernel: pcieport 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
Jul 22 07:41:38 host kernel: pci 0000:06:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
Jul 22 07:41:38 host kernel: nvidia 0000:06:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
Jul 22 07:41:38 host kernel: ------------[ cut here ]------------
Jul 22 07:41:38 host kernel: WARNING: CPU: 1 PID: 22 at fs/proc/generic.c:346 proc_register+0xf9/0x120
Jul 22 07:41:38 host kernel: proc_dir_entry 'gpus/0000:06:00.0' already registered
Jul 22 07:41:38 host kernel: Modules linked in: fuse joydev nvidia(PO) mousedev iTCO_wdt gpio_ich iTCO_vendor_support msi_wmi sparse_keymap arc4 mxm_wmi iwldvm mac80211 snd_hda_codec_hdmi coretemp snd_hda_codec_si3054 iwlwifi snd_hda_codec_realtek evdev psmouse snd_hda_codec_generic input_leds mac_hid pcspkr snd_hda_intel cfg80211 i2c_i801 snd_hda_codec r8169 snd_hda_core hid_logitech_hidpp ir_rc6_decoder mii snd_hwdep drm lpc_ich rfkill rc_rc6_mce snd_pcm ir_lirc_codec lirc_dev snd_timer thermal battery ene_ir ac rc_core snd video wmi intel_agp soundcore button intel_gtt shpchp acpi_cpufreq tpm_tis tpm_tis_core tpm sch_fq_codel ip_tables x_tables ext4 crc16 jbd2 fscrypto mbcache hid_logitech_dj usbhid hid sr_mod cdrom sd_mod ata_generic serio_raw pata_acpi atkbd libps2 ata_piix libata scsi_mod uhci_hcd sdhci_pci
Jul 22 07:41:38 host kernel: sdhci led_class firewire_ohci mmc_core firewire_core crc_itu_t i8042 serio ehci_pci ehci_hcd usbcore usb_common
Jul 22 07:41:38 host kernel: CPU: 1 PID: 22 Comm: kworker/1:1 Tainted: P O 4.11.9-1-ARCH #1
Jul 22 07:41:38 host kernel: Hardware name: Micro-Star International MEGA BOOK EX720/MS-1723, BIOS A1723IMS V1.06 11/10/2008
Jul 22 07:41:38 host kernel: Workqueue: pciehp-0 pciehp_power_thread
Jul 22 07:41:38 host kernel: Call Trace:
Jul 22 07:41:38 host kernel: dump_stack+0x63/0x81
Jul 22 07:41:38 host kernel: __warn+0xcb/0xf0
Jul 22 07:41:38 host kernel: warn_slowpath_fmt+0x5a/0x80
Jul 22 07:41:38 host kernel: ? proc_alloc_inum+0x50/0xe0
Jul 22 07:41:38 host kernel: proc_register+0xf9/0x120
Jul 22 07:41:38 host kernel: proc_mkdir_data+0x67/0x90
Jul 22 07:41:38 host kernel: proc_mkdir_mode+0x13/0x20
Jul 22 07:41:38 host kernel: nv_procfs_add_gpu+0x6b/0x150 [nvidia]
Jul 22 07:41:38 host kernel: nvidia_probe+0x51d/0xe20 [nvidia]
Jul 22 07:41:38 host kernel: local_pci_probe+0x42/0xa0
Jul 22 07:41:38 host kernel: ? pci_match_device+0xe5/0x110
Jul 22 07:41:38 host kernel: pci_device_probe+0xbe/0x150
Jul 22 07:41:38 host kernel: driver_probe_device+0x106/0x450
Jul 22 07:41:38 host kernel: __device_attach_driver+0x83/0x100
Jul 22 07:41:38 host kernel: ? __driver_attach+0xe0/0xe0
Jul 22 07:41:38 host kernel: bus_for_each_drv+0x69/0xb0
Jul 22 07:41:38 host kernel: __device_attach+0xdd/0x160
Jul 22 07:41:38 host kernel: device_attach+0x10/0x20
Jul 22 07:41:38 host kernel: pci_bus_add_device+0x4f/0x90
Jul 22 07:41:38 host kernel: pci_bus_add_devices+0x2f/0x70
Jul 22 07:41:38 host kernel: pciehp_configure_device+0x96/0x120
Jul 22 07:41:38 host kernel: pciehp_enable_slot+0x1a5/0x280
Jul 22 07:41:38 host kernel: pciehp_power_thread+0x3b/0xa0
Jul 22 07:41:38 host kernel: process_one_work+0x1e0/0x490
Jul 22 07:41:38 host kernel: worker_thread+0x48/0x4e0
Jul 22 07:41:38 host kernel: kthread+0x125/0x140
Jul 22 07:41:38 host kernel: ? process_one_work+0x490/0x490
Jul 22 07:41:38 host kernel: ? kthread_create_on_node+0x70/0x70
Jul 22 07:41:38 host kernel: ? kthread_create_on_node+0x70/0x70
Jul 22 07:41:38 host kernel: ret_from_fork+0x25/0x30
Jul 22 07:41:38 host kernel: ---[ end trace 4e5b36dbbaee381c ]---
Jul 22 07:41:38 host kernel: NVRM: GPU at 0000:06:00.0 has fallen off the bus.
Jul 22 07:41:38 host kernel: NVRM: GPU at 0000:06:00.0 has fallen off the bus.
Jul 22 07:41:38 host kernel: NVRM: Your current system configuration has known problems when
Jul 22 07:41:38 host kernel: NVRM: accessing PCI Configuration Space that can lead to accesses
Jul 22 07:41:38 host kernel: NVRM: to the PCI Configuration Space of the wrong PCI device. This
Jul 22 07:41:38 host kernel: NVRM: is known to cause instabilities with the NVIDIA graphics driver.
Jul 22 07:41:38 host kernel: NVRM:
Jul 22 07:41:38 host kernel: NVRM: Please see the MMConfig section in the readme for more information
Jul 22 07:41:38 host kernel: NVRM: on how to work around this problem.
Jul 22 07:42:02 host systemd-logind[253]: Power key pressed.
Jul 22 07:42:02 host systemd-logind[253]: Powering Off...
Jul 22 07:42:02 host systemd-logind[253]: System is powering down.-------------------------------
Switched from nvidia-340xx to nouveau. Seems to have worked.
Last edited by sokl (2017-07-23 04:34:48)
Offline
#2 2017-07-22 06:15:21
- jasonwryan
- Anarchist
- From: .nz
- Registered: 2009-05-09
- Posts: 30,426
- Website
Re: [SOLVED] Laptop freezes when starting or using GUI.
Video card and driver? Xorg log?
Moving to NC...
Offline
#3 2017-07-22 06:17:07
- HiImTye
- Member
- From: Halifax, NS, Canada
- Registered: 2012-05-09
- Posts: 1,072
Re: [SOLVED] Laptop freezes when starting or using GUI.
sokl wrote:
Jul 22 07:41:38 host kernel: NVRM: GPU at 0000:06:00.0 has fallen off the bus. Jul 22 07:41:38 host kernel: NVRM: GPU at 0000:06:00.0 has fallen off the bus. Jul 22 07:41:38 host kernel: NVRM: Your current system configuration has known problems when Jul 22 07:41:38 host kernel: NVRM: accessing PCI Configuration Space that can lead to accesses Jul 22 07:41:38 host kernel: NVRM: to the PCI Configuration Space of the wrong PCI device. This Jul 22 07:41:38 host kernel: NVRM: is known to cause instabilities with the NVIDIA graphics driver. Jul 22 07:41:38 host kernel: NVRM: Jul 22 07:41:38 host kernel: NVRM: Please see the MMConfig section in the readme for more information Jul 22 07:41:38 host kernel: NVRM: on how to work around this problem.
seems to be a driver issue, have you looked at the section of the readme for more information? any time your GPU 'falls of the bus' it causes a video freeze, because your driver can't drive it anymore.
Last edited by HiImTye (2017-07-22 06:18:00)
Offline
#4 2017-07-22 06:55:17
- sokl
- Member
- Registered: 2015-02-02
- Posts: 11
Re: [SOLVED] Laptop freezes when starting or using GUI.
Card: Nvidia 9300m GS
Driver: nvidia-340xx
Xorg log
[ 172.230]
X.Org X Server 1.19.3
Release Date: 2017-03-15
[ 172.230] X Protocol Version 11, Revision 0
[ 172.231] Build Operating System: Linux 4.9.11-1-ARCH x86_64
[ 172.232] Current Operating System: Linux host 4.11.9-1-ARCH #1 SMP PREEMPT Wed Jul 5 18:23:08 CEST 2017 x86_64
[ 172.232] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=36da3001-900c-46dd-ae0b-75a493304c2b rw quiet
[ 172.233] Build Date: 07 April 2017 05:42:48PM
[ 172.233]
[ 172.233] Current version of pixman: 0.34.0
[ 172.234] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 172.235] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 172.249] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 22 09:50:42 2017
[ 172.262] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 172.263] (==) No Layout section. Using the first Screen section.
[ 172.263] (==) No screen section available. Using defaults.
[ 172.263] (**) |-->Screen "Default Screen Section" (0)
[ 172.263] (**) | |-->Monitor "<default monitor>"
[ 172.264] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 172.264] (==) Automatically adding devices
[ 172.264] (==) Automatically enabling devices
[ 172.264] (==) Automatically adding GPU devices
[ 172.264] (==) Automatically binding GPU devices
[ 172.264] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 172.268] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 172.268] Entry deleted from font path.
[ 172.270] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 172.270] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 172.270] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 172.270] (II) Loader magic: 0x822d60
[ 172.270] (II) Module ABI versions:
[ 172.270] X.Org ANSI C Emulation: 0.4
[ 172.270] X.Org Video Driver: 23.0
[ 172.270] X.Org XInput driver : 24.1
[ 172.270] X.Org Server Extension : 10.0
[ 172.271] (++) using VT number 1
[ 172.271] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 172.273] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 172.273] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 172.274] (II) systemd-logind: got for /dev/dri/card0 226:0 11 paused 0
[ 172.276] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules"
[ 172.276] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[ 172.278] (--) PCI:*(0:6:0:0) 10de:06e9:1462:7230 rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
[ 172.278] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 172.278] (II) LoadModule: "glx"
[ 172.280] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[ 172.665] (II) Module glx: vendor="NVIDIA Corporation"
[ 172.665] compiled for 4.0.2, module version = 1.0.0
[ 172.665] Module class: X.Org Server Extension
[ 172.667] (II) NVIDIA GLX Module 340.102 Mon Jan 16 12:37:38 PST 2017
[ 172.668] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 172.668] loading driver: nvidia
[ 172.668] (==) Matched nvidia as autoconfigured driver 0
[ 172.668] (==) Matched nouveau as autoconfigured driver 1
[ 172.668] (==) Matched nv as autoconfigured driver 2
[ 172.668] (==) Matched nouveau as autoconfigured driver 3
[ 172.668] (==) Matched nv as autoconfigured driver 4
[ 172.668] (==) Matched modesetting as autoconfigured driver 5
[ 172.668] (==) Matched fbdev as autoconfigured driver 6
[ 172.668] (==) Matched vesa as autoconfigured driver 7
[ 172.668] (==) Assigned the driver to the xf86ConfigLayout
[ 172.668] (II) LoadModule: "nvidia"
[ 172.672] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 172.693] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 172.693] compiled for 4.0.2, module version = 1.0.0
[ 172.693] Module class: X.Org Video Driver
[ 172.694] (II) LoadModule: "nouveau"
[ 172.696] (WW) Warning, couldn't open module nouveau
[ 172.696] (II) UnloadModule: "nouveau"
[ 172.696] (II) Unloading nouveau
[ 172.696] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 172.696] (II) LoadModule: "nv"
[ 172.696] (WW) Warning, couldn't open module nv
[ 172.696] (II) UnloadModule: "nv"
[ 172.696] (II) Unloading nv
[ 172.696] (EE) Failed to load module "nv" (module does not exist, 0)
[ 172.696] (II) LoadModule: "modesetting"
[ 172.696] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 172.698] (II) Module modesetting: vendor="X.Org Foundation"
[ 172.698] compiled for 1.19.3, module version = 1.19.3
[ 172.698] Module class: X.Org Video Driver
[ 172.698] ABI class: X.Org Video Driver, version 23.0
[ 172.698] (II) LoadModule: "fbdev"
[ 172.698] (WW) Warning, couldn't open module fbdev
[ 172.698] (II) UnloadModule: "fbdev"
[ 172.698] (II) Unloading fbdev
[ 172.698] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 172.698] (II) LoadModule: "vesa"
[ 172.698] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 172.700] (II) Module vesa: vendor="X.Org Foundation"
[ 172.700] compiled for 1.19.0, module version = 2.3.4
[ 172.700] Module class: X.Org Video Driver
[ 172.700] ABI class: X.Org Video Driver, version 23.0
[ 172.700] (II) NVIDIA dlloader X Driver 340.102 Mon Jan 16 12:17:09 PST 2017
[ 172.700] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 172.701] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 172.701] (II) VESA: driver for VESA chipsets: vesa
[ 172.702] (II) Loading sub module "fb"
[ 172.702] (II) LoadModule: "fb"
[ 172.703] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 172.705] (II) Module fb: vendor="X.Org Foundation"
[ 172.705] compiled for 1.19.3, module version = 1.0.0
[ 172.705] ABI class: X.Org ANSI C Emulation, version 0.4
[ 172.705] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 172.705] (II) Loading sub module "wfb"
[ 172.705] (II) LoadModule: "wfb"
[ 172.706] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 172.709] (II) Module wfb: vendor="X.Org Foundation"
[ 172.709] compiled for 1.19.3, module version = 1.0.0
[ 172.709] ABI class: X.Org ANSI C Emulation, version 0.4
[ 172.709] (II) Loading sub module "ramdac"
[ 172.709] (II) LoadModule: "ramdac"
[ 172.709] (II) Module "ramdac" already built-in
[ 172.714] (WW) Falling back to old probe method for modesetting
[ 172.714] (WW) Falling back to old probe method for vesa
[ 172.714] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 172.714] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 172.714] (==) NVIDIA(0): RGB weight 888
[ 172.714] (==) NVIDIA(0): Default visual is TrueColor
[ 172.714] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 172.714] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 172.714] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 172.715] (**) NVIDIA(0): Enabling 2D acceleration
[ 173.683] (II) NVIDIA(0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[ 173.684] (II) NVIDIA(0): Vision stereo.
[ 173.684] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 173.687] (II) NVIDIA(0): NVIDIA GPU GeForce 9300M GS (G98) at PCI:6:0:0 (GPU-0)
[ 173.687] (--) NVIDIA(0): Memory: 262144 kBytes
[ 173.687] (--) NVIDIA(0): VideoBIOS: 62.98.3c.00.50
[ 173.687] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 173.691] (--) NVIDIA(0): Valid display device(s) on GeForce 9300M GS at PCI:6:0:0
[ 173.691] (--) NVIDIA(0): CRT-0
[ 173.691] (--) NVIDIA(0): Seiko/Epson (DFP-0) (boot, connected)
[ 173.691] (--) NVIDIA(0): DFP-1
[ 173.691] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 173.692] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal LVDS
[ 173.692] (--) NVIDIA(GPU-0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
[ 173.692] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 173.692] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 173.692] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 173.692] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
[ 173.692] (**) NVIDIA(0): been enabled on all display devices.)
[ 173.694] (==) NVIDIA(0):
[ 173.694] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 173.694] (==) NVIDIA(0): will be used as the requested mode.
[ 173.694] (==) NVIDIA(0):
[ 173.694] (II) NVIDIA(0): Validated MetaModes:
[ 173.694] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 173.694] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 174.744] (--) NVIDIA(0): DPI set to (98, 99); computed from "UseEdidDpi" X config
[ 174.744] (--) NVIDIA(0): option
[ 174.744] (II) UnloadModule: "modesetting"
[ 174.744] (II) Unloading modesetting
[ 174.744] (II) UnloadModule: "vesa"
[ 174.744] (II) Unloading vesa
[ 174.744] (--) Depth 24 pixmap format is 32 bpp
[ 174.744] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 174.749] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 174.749] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 174.749] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 174.749] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 174.749] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 174.749] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 174.749] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 174.749] (II) NVIDIA(0): Config Options in the README.
[ 174.751] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 175.084] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 175.084] (==) NVIDIA(0): Backing store enabled
[ 175.084] (==) NVIDIA(0): Silken mouse enabled
[ 175.086] (==) NVIDIA(0): DPMS enabled
[ 175.088] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 175.088] (II) Loading sub module "dri2"
[ 175.088] (II) LoadModule: "dri2"
[ 175.088] (II) Module "dri2" already built-in
[ 175.088] (II) NVIDIA(0): [DRI2] Setup
[ 175.088] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 175.088] (--) RandR disabled
[ 175.095] (II) Initializing extension GLX
[ 175.095] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 175.307] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 175.307] (II) LoadModule: "libinput"
[ 175.308] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 175.319] (II) Module libinput: vendor="X.Org Foundation"
[ 175.319] compiled for 1.19.3, module version = 0.25.1
[ 175.319] Module class: X.Org XInput Driver
[ 175.319] ABI class: X.Org XInput driver, version 24.1
[ 175.319] (II) Using input driver 'libinput' for 'Power Button'
[ 175.320] (II) systemd-logind: got for /dev/input/event3 13:67 37 paused 0
[ 175.320] (**) Power Button: always reports core events
[ 175.320] (**) Option "Device" "/dev/input/event3"
[ 175.320] (**) Option "_source" "server/udev"
[ 175.321] (II) event3 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 175.321] (II) event3 - (II) Power Button: (II) device is a keyboard
[ 175.321] (II) event3 - (II) Power Button: (II) device removed
[ 175.321] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 175.321] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 175.322] (II) event3 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 175.322] (II) event3 - (II) Power Button: (II) device is a keyboard
[ 175.323] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 175.324] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 175.324] (II) Using input driver 'libinput' for 'Video Bus'
[ 175.324] (II) systemd-logind: got for /dev/input/event4 13:68 40 paused 0
[ 175.325] (**) Video Bus: always reports core events
[ 175.325] (**) Option "Device" "/dev/input/event4"
[ 175.325] (**) Option "_source" "server/udev"
[ 175.325] (II) event4 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 175.325] (II) event4 - (II) Video Bus: (II) device is a keyboard
[ 175.325] (II) event4 - (II) Video Bus: (II) device removed
[ 175.325] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5/event4"
[ 175.325] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 175.327] (II) event4 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 175.327] (II) event4 - (II) Video Bus: (II) device is a keyboard
[ 175.328] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 175.328] (II) No input driver specified, ignoring this device.
[ 175.328] (II) This device may have been added with another device file.
[ 175.328] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 175.328] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 175.328] (II) Using input driver 'libinput' for 'Power Button'
[ 175.329] (II) systemd-logind: got for /dev/input/event2 13:66 41 paused 0
[ 175.329] (**) Power Button: always reports core events
[ 175.329] (**) Option "Device" "/dev/input/event2"
[ 175.329] (**) Option "_source" "server/udev"
[ 175.330] (II) event2 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 175.330] (II) event2 - (II) Power Button: (II) device is a keyboard
[ 175.330] (II) event2 - (II) Power Button: (II) device removed
[ 175.330] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[ 175.330] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 175.331] (II) event2 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 175.331] (II) event2 - (II) Power Button: (II) device is a keyboard
[ 175.332] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event10)
[ 175.332] (II) No input driver specified, ignoring this device.
[ 175.332] (II) This device may have been added with another device file.
[ 175.333] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
[ 175.333] (II) No input driver specified, ignoring this device.
[ 175.333] (II) This device may have been added with another device file.
[ 175.333] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 175.333] (II) No input driver specified, ignoring this device.
[ 175.333] (II) This device may have been added with another device file.
[ 175.334] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[ 175.334] (II) No input driver specified, ignoring this device.
[ 175.334] (II) This device may have been added with another device file.
[ 175.335] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event9)
[ 175.335] (II) No input driver specified, ignoring this device.
[ 175.335] (II) This device may have been added with another device file.
[ 175.336] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 175.336] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 175.336] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 175.337] (II) systemd-logind: got for /dev/input/event0 13:64 42 paused 0
[ 175.337] (**) AT Translated Set 2 keyboard: always reports core events
[ 175.337] (**) Option "Device" "/dev/input/event0"
[ 175.337] (**) Option "_source" "server/udev"
[ 175.337] (II) event0 - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 175.337] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 175.337] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device removed
[ 175.338] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 175.338] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 175.339] (II) event0 - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 175.339] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 175.339] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event13)
[ 175.339] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 175.340] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 175.340] (II) systemd-logind: got for /dev/input/event13 13:77 43 paused 0
[ 175.340] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 175.340] (**) Option "Device" "/dev/input/event13"
[ 175.340] (**) Option "_source" "server/udev"
[ 175.341] (II) event13 - (II) SynPS/2 Synaptics TouchPad: (II) is tagged by udev as: Touchpad
[ 175.341] (II) event13 - (II) SynPS/2 Synaptics TouchPad: (II) device is a touchpad
[ 175.341] (II) event13 - (II) SynPS/2 Synaptics TouchPad: (II) device removed
[ 175.341] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event13"
[ 175.341] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[ 175.342] (**) Option "AccelerationScheme" "none"
[ 175.342] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 175.342] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 175.342] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 175.343] (II) event13 - (II) SynPS/2 Synaptics TouchPad: (II) is tagged by udev as: Touchpad
[ 175.343] (II) event13 - (II) SynPS/2 Synaptics TouchPad: (II) device is a touchpad
[ 175.343] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 175.343] (II) No input driver specified, ignoring this device.
[ 175.343] (II) This device may have been added with another device file.
[ 175.344] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 175.344] (II) No input driver specified, ignoring this device.
[ 175.344] (II) This device may have been added with another device file.
[ 175.345] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event12)
[ 175.345] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 175.345] (II) Using input driver 'libinput' for 'MSI WMI hotkeys'
[ 175.346] (II) systemd-logind: got for /dev/input/event12 13:76 44 paused 0
[ 175.346] (**) MSI WMI hotkeys: always reports core events
[ 175.346] (**) Option "Device" "/dev/input/event12"
[ 175.346] (**) Option "_source" "server/udev"
[ 175.347] (II) event12 - (II) MSI WMI hotkeys: (II) is tagged by udev as: Keyboard
[ 175.347] (II) event12 - (II) MSI WMI hotkeys: (II) device is a keyboard
[ 175.347] (II) event12 - (II) MSI WMI hotkeys: (II) device removed
[ 175.347] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event12"
[ 175.347] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 11)
[ 175.348] (II) event12 - (II) MSI WMI hotkeys: (II) is tagged by udev as: Keyboard
[ 175.348] (II) event12 - (II) MSI WMI hotkeys: (II) device is a keyboard
[ 175.349] (II) config/udev: Adding input device ENE eHome Infrared Remote Receiver (/dev/input/event5)
[ 175.349] (**) ENE eHome Infrared Remote Receiver: Applying InputClass "libinput keyboard catchall"
[ 175.349] (II) Using input driver 'libinput' for 'ENE eHome Infrared Remote Receiver'
[ 175.349] (II) systemd-logind: got for /dev/input/event5 13:69 45 paused 0
[ 175.350] (**) ENE eHome Infrared Remote Receiver: always reports core events
[ 175.350] (**) Option "Device" "/dev/input/event5"
[ 175.350] (**) Option "_source" "server/udev"
[ 175.350] (II) event5 - (II) ENE eHome Infrared Remote Receiver: (II) is tagged by udev as: Keyboard
[ 175.350] (II) event5 - (II) ENE eHome Infrared Remote Receiver: (II) device is a keyboard
[ 175.350] (II) event5 - (II) ENE eHome Infrared Remote Receiver: (II) device removed
[ 175.350] (**) Option "config_info" "udev:/sys/devices/virtual/rc/rc0/input6/event5"
[ 175.350] (II) XINPUT: Adding extended input device "ENE eHome Infrared Remote Receiver" (type: KEYBOARD, id 12)
[ 175.351] (II) event5 - (II) ENE eHome Infrared Remote Receiver: (II) is tagged by udev as: Keyboard
[ 175.351] (II) event5 - (II) ENE eHome Infrared Remote Receiver: (II) device is a keyboard
[ 180.826] (II) Axis 0x1 value 4628 is outside expected range [1256, 4600]
See https://wayland.freedesktop.org/libinput/doc/1.8.1//absolute_coordinate_ranges.html for details
[ 218.330] (II) config/udev: Adding input device Logitech M510 (/dev/input/mouse1)
[ 218.330] (II) No input driver specified, ignoring this device.
[ 218.330] (II) This device may have been added with another device file.
[ 218.347] (II) config/udev: Adding input device Logitech M510 (/dev/input/event14)
[ 218.347] (**) Logitech M510: Applying InputClass "libinput pointer catchall"
[ 218.347] (II) Using input driver 'libinput' for 'Logitech M510'
[ 218.348] (II) systemd-logind: got for /dev/input/event14 13:78 58 paused 0
[ 218.348] (**) Logitech M510: always reports core events
[ 218.348] (**) Option "Device" "/dev/input/event14"
[ 218.348] (**) Option "_source" "server/udev"
[ 218.349] (II) event14 - (II) Logitech M510: (II) is tagged by udev as: Mouse
[ 218.349] (II) event14 - (II) Logitech M510: (II) device set to 800 DPI
[ 218.349] (II) event14 - (II) Logitech M510: (II) device is a pointer
[ 218.349] (II) event14 - (II) Logitech M510: (II) device removed
[ 218.349] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.2/0003:046D:C52B.0003/0003:046D:1025.0004/input/input15/event14"
[ 218.349] (II) XINPUT: Adding extended input device "Logitech M510" (type: MOUSE, id 13)
[ 218.349] (**) Option "AccelerationScheme" "none"
[ 218.350] (**) Logitech M510: (accel) selected scheme none/0
[ 218.350] (**) Logitech M510: (accel) acceleration factor: 2.000
[ 218.350] (**) Logitech M510: (accel) acceleration threshold: 4
[ 218.350] (II) event14 - (II) Logitech M510: (II) is tagged by udev as: Mouse
[ 218.350] (II) event14 - (II) Logitech M510: (II) device set to 800 DPI
[ 218.350] (II) event14 - (II) Logitech M510: (II) device is a pointer----------------------
Switched from nvidia-340xx to nouveau. Seems to have worked.
Last edited by sokl (2017-07-23 04:33:49)
Offline