You are not logged in.
- Topics: Active | Unanswered
#1 2017-08-03 08:22:43
- socialloser1
- Member
- Registered: 2017-04-04
- Posts: 32
[solved] "no signal" after boot, disbling KMS temporarily works
my machine is arch OS with lxdm, GNOME desktop enviroment, graphic card is Raedeon HD 6850
currently it is suffering from a weird display problem, everything used to be working well, but suddenly, without any system upgrade or configuration , it comes with " no signal " on screen after the boot process.
I disabled lxdm for debug, but find the problem is happending randomly. Normally, my system should boot into tty with monitor working in HDMI mode. by this I mean, when I turn on the computer, my monitor start with DVI mode, the monitor displays the bios message , RAM check , etc.. all the way until just before TTY prompt, the monitor keeps in DVI mode, then the screen black out, then the TTY prompt shows with the monitor switched to HDMI mode. from now on , the monitor always runs in HDMI mode, that's the way my computer used to work, when there is no problem happen.
but now, if I try boot my system normally, at the stage when the monitor should switch to HDMI mode and displaying TTY, the screen goes blank and displays "no signal" on screen, I suspect it is caused by KMS, so I added "nomodeset" into the grub kernel parameters then boot , this time the machine boot to TTY now , but the monitor is working in DVI mode. when I log into tty (the default shell is Fish) , there is a error message said : "unable to connect to X server". if I manually start the lxdm at this time, I can log into the desktop environment normally. ( the desktop env I selected when logging in is GNOME on xorg )but the monitor is always at the DVI mode.
the most weird problem is that , if I reboot the machine at this time with "reboot" command , sometimes the machine will boot normally and goes into HDMI mode, sometimes it doesn't work, resulting into "no signal". it just happens randomly. But if I shutdown the machine explicitly (with "shutdown -h" command) and boot again, the normal boot always fail. since I modified the grub boot menu by pressing "E" when the grub menu comes out , the "nomodeset" parameter is not saved. I just can't understand why this problem can happen.
my grub.cfg is as follows :
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-60e3edd4-4770-4ab8-acbc-b6593db37d62' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 -- hint-baremetal=ahci0,msdos2 60e3edd4-4770-4ab8-acbc-b6593db37d62
else
search --no-floppy --fs-uuid --set=root 60e3edd4-4770-4ab8-acbc-b6593db37d62
fi
echo 'Loading Linux linux ...'
linux /boot/vmlinuz-linux root=UUID=60e3edd4-4770-4ab8-acbc-b6593db37d62 rw quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
}Please help me.
Last edited by socialloser1 (2017-08-07 14:31:22)
Offline
#2 2017-08-03 09:10:55
- WorMzy
- Administrator
- From: Scotland
- Registered: 2010-06-16
- Posts: 13,723
- Website
Re: [solved] "no signal" after boot, disbling KMS temporarily works
Please remove the superfluous call for help from your topic title: https://wiki.archlinux.org/index.php/Co … ow_to_post
What do you mean by DVI and HDMI modes? Have you connected both DVI and HDMI video cables from your monitor to your desktop? If so, why?
Which graphics driver are you using? How did you install/configure it? Do you have early KMS enabled?
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Offline
#3 2017-08-03 10:33:16
- socialloser1
- Member
- Registered: 2017-04-04
- Posts: 32
Re: [solved] "no signal" after boot, disbling KMS temporarily works
WorMzy wrote:
Please remove the superfluous call for help from your topic title: https://wiki.archlinux.org/index.php/Co … ow_to_post
What do you mean by DVI and HDMI modes? Have you connected both DVI and HDMI video cables from your monitor to your desktop? If so, why?
Which graphics driver are you using? How did you install/configure it? Do you have early KMS enabled?
Thank you for the reply.
by "DVI mode" and "HDMI mode", I mean when I power on the monitor , it shows a bar with "DVI 1024x768@60Hz" message on it, this bar disappear after a few seconds, by saying "my monitor switch to HDMI mode" , I mean there comes out a bar with "HDMI 1024x768@60Hz" on it.
my monitor is connected to the PC with a HDMI to DVI cable. the graphic card has only a DVI port, the monitor has only HDMI port. the cable seems to be well because I can boot to windows 7 system without problem. at this moment , an idea strikes me that maybe the "converting part" in the cable is malfunction randomly, I can't confirm it because currently I don't have another cable to replace. anyway, the "no signal" screen only happens when booting to tty, if the monitor successfully get into "HDMI mode", it keeps work well.
about graphic card driver, I can't exactly recall wether I installed any driver explicitly or not. this Arch OS has been installed for more than 1 year, by looking at the archwiki, I see that the proprietary driver package is called "catalyst", the open source driver package is "xf86-video-ati“, neither of them is found in the result of "pacman -Q" command. actually, these days, when I tried to solve the problem myself , I installed "xf86-video-ati" package , but that doesn't help. this package was not installed when this problem first occurred.
by early KMS, I checked the archwiki, in my /etc/mkinitcpio.conf file there is mostly commented out lines. the “MODULES=” line is blank. other lines containing "=" are all blank except "HOOKS=" line:
HOOKS="base udev autodetect modconf block filesystems keyboard fsck"by the way , there is another thing I can remember , which maybe relevant to this problem:
when I install the OS at first , I want to enlarge the font of TTY since my monitor is small (1024x768), the largest font provided is of height or width 16, I searched on the net for method to do this, at that time I do really tried some stuff with framebuffer or KMS, at last , I find a way to make my tty font to be terminus-font-32, I can't recall how I did it. my /etc/vconsole.conf file has content
FONT=ter-g32band the font really works. I don't know this matters or not, but it is too long for me to recall. anyway , this settings works for more than 1 year , maybe not relevant at all, I just tells here for completeness.
Last edited by socialloser1 (2017-08-03 10:56:26)
Offline
#4 2017-08-03 11:24:52
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,877
Re: [solved] "no signal" after boot, disbling KMS temporarily works
please provide the outputs of
lspci
lsmod
xrandr -qas well as /var/log/Xorg.0.log
When this happens the next time, try to switch the VT (ctrl+alt+F1/F2/F3 ...) and see whether that gets you to another VT - and connects the monitor.
Wild guess: pass "radeon.audio=0" to the kernel parameters.
Offline
#5 2017-08-03 12:31:51
- socialloser1
- Member
- Registered: 2017-04-04
- Posts: 32
Re: [solved] "no signal" after boot, disbling KMS temporarily works
seth wrote:
please provide the outputs of
lspci lsmod xrandr -qas well as /var/log/Xorg.0.log
When this happens the next time, try to switch the VT (ctrl+alt+F1/F2/F3 ...) and see whether that gets you to another VT - and connects the monitor.
Wild guess: pass "radeon.audio=0" to the kernel parameters.
lspci output :
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS780 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Barts PRO [Radeon HD 6850]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Barts HDMI Audio [Radeon HD 6790/6850/6870 / 7720 OEM]
02:00.0 Ethernet controller: Qualcomm Atheros AR8161 Gigabit Ethernet (rev 08)lsmod output:
Module Size Used by
fuse 98304 3
snd_hda_codec_hdmi 49152 1
cfg80211 520192 0
rfkill 20480 3 cfg80211
mousedev 20480 0
input_leds 16384 0
led_class 16384 1 input_leds
edac_mce_amd 28672 0
snd_hda_codec_realtek 73728 1
snd_hda_codec_generic 69632 1 snd_hda_codec_realtek
snd_hda_intel 36864 4
evdev 24576 7
mac_hid 16384 0
amdkfd 118784 1
amd_iommu_v2 20480 1 amdkfd
kvm 520192 0
radeon 1462272 15
snd_hda_codec 106496 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_core 65536 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 86016 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
alx 40960 0
ttm 81920 1 radeon
irqbypass 16384 1 kvm
drm_kms_helper 126976 1 radeon
pcspkr 16384 0
snd_timer 28672 1 snd_pcm
drm 299008 7 radeon,ttm,drm_kms_helper
k10temp 16384 0
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
fb_sys_fops 16384 1 drm_kms_helper
psmouse 131072 0
i2c_algo_bit 16384 1 radeon
snd 69632 16 snd_hda_intel,snd_hwdep,snd_hda_codec,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek,snd_pcm
soundcore 16384 1 snd
mdio 16384 1 alx
sp5100_tco 16384 0
wmi 16384 0
shpchp 32768 0
asus_atk0110 20480 0
i2c_piix4 24576 0
button 16384 0
acpi_cpufreq 20480 1
tpm_tis 16384 0
tpm_tis_core 20480 1 tpm_tis
tpm 49152 2 tpm_tis,tpm_tis_core
sch_fq_codel 20480 5
ip_tables 24576 0
x_tables 28672 1 ip_tables
ext4 540672 1
crc16 16384 1 ext4
jbd2 90112 1 ext4
fscrypto 24576 1 ext4
mbcache 16384 1 ext4
hid_kensington 16384 0
hid_generic 16384 0
usbhid 45056 0
hid 114688 3 hid_generic,usbhid,hid_kensington
sr_mod 24576 0
sd_mod 49152 2
cdrom 53248 1 sr_mod
ata_generic 16384 0
pata_acpi 16384 0
ohci_pci 16384 0
serio_raw 16384 0
atkbd 24576 0
libps2 16384 2 atkbd,psmouse
ahci 36864 1
pata_atiixp 16384 0
libahci 28672 1 ahci
ehci_pci 16384 0
ehci_hcd 73728 1 ehci_pci
ohci_hcd 49152 1 ohci_pci
libata 208896 5 pata_atiixp,ahci,libahci,ata_generic,pata_acpi
usbcore 208896 5 usbhid,ehci_hcd,ohci_pci,ohci_hcd,ehci_pci
scsi_mod 155648 3 sd_mod,libata,sr_mod
usb_common 16384 1 usbcore
i8042 24576 0
serio 20480 6 serio_raw,atkbd,psmouse,i8042xrand -q output:
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 16384 x 16384
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
DisplayPort-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-0 disconnected (normal left inverted right x axis y axis)
DVI-1 connected primary 1024x768+0+0 (normal left inverted right x axis y axis) 575mm x 323mm
1024x768 60.00*+
1920x1080 60.00 50.00 59.94 24.00 23.98
1920x1080i 60.00 50.00 59.94
1280x720 60.00 50.00 59.94
800x600 60.32 56.25
720x576 50.00
720x576i 50.00
720x480 60.00 59.94
720x480i 60.00 59.94
640x480 60.00 59.94
720x400 70.08 /var/log/Xorg.0.log:
[ 115.166]
X.Org X Server 1.19.3
Release Date: 2017-03-15
[ 115.166] X Protocol Version 11, Revision 0
[ 115.166] Build Operating System: Linux 4.9.11-1-ARCH x86_64
[ 115.166] Current Operating System: Linux archlinux 4.12.3-1-ARCH #1 SMP PREEMPT Sat Jul 22 15:32:02 UTC 2017 x86_64
[ 115.166] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=60e3edd4-4770-4ab8-acbc-b6593db99e7e rw quiet
[ 115.166] Build Date: 07 April 2017 05:42:48PM
[ 115.166]
[ 115.166] Current version of pixman: 0.34.0
[ 115.166] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 115.166] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 115.166] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 3 19:17:07 2017
[ 115.183] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 115.183] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 115.210] (==) No Layout section. Using the first Screen section.
[ 115.210] (==) No screen section available. Using defaults.
[ 115.210] (**) |-->Screen "Default Screen Section" (0)
[ 115.210] (**) | |-->Monitor "<default monitor>"
[ 115.218] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 115.218] (==) Automatically adding devices
[ 115.218] (==) Automatically enabling devices
[ 115.218] (==) Automatically adding GPU devices
[ 115.218] (==) Automatically binding GPU devices
[ 115.218] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 115.233] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 115.233] Entry deleted from font path.
[ 115.264] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 115.264] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 115.264] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 115.264] (II) Loader magic: 0x822d60
[ 115.264] (II) Module ABI versions:
[ 115.264] X.Org ANSI C Emulation: 0.4
[ 115.264] X.Org Video Driver: 23.0
[ 115.264] X.Org XInput driver : 24.1
[ 115.264] X.Org Server Extension : 10.0
[ 115.265] (++) using VT number 1
[ 115.265] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 115.266] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 115.269] (--) PCI:*(0:1:0:0) 1002:6739:1787:2304 rev 0, Mem @ 0xd0000000/268435456, 0xfeae0000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 115.269] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 115.270] (II) LoadModule: "glx"
[ 115.293] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 115.388] (II) Module glx: vendor="X.Org Foundation"
[ 115.388] compiled for 1.19.3, module version = 1.0.0
[ 115.388] ABI class: X.Org Server Extension, version 10.0
[ 115.388] (II) Applying OutputClass "Radeon" to /dev/dri/card0
[ 115.388] loading driver: radeon
[ 115.388] (==) Matched radeon as autoconfigured driver 0
[ 115.388] (==) Matched ati as autoconfigured driver 1
[ 115.388] (==) Matched ati as autoconfigured driver 2
[ 115.388] (==) Matched modesetting as autoconfigured driver 3
[ 115.388] (==) Matched fbdev as autoconfigured driver 4
[ 115.388] (==) Matched vesa as autoconfigured driver 5
[ 115.388] (==) Assigned the driver to the xf86ConfigLayout
[ 115.388] (II) LoadModule: "radeon"
[ 115.388] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 115.424] (II) Module radeon: vendor="X.Org Foundation"
[ 115.424] compiled for 1.19.3, module version = 7.9.0
[ 115.424] Module class: X.Org Video Driver
[ 115.424] ABI class: X.Org Video Driver, version 23.0
[ 115.424] (II) LoadModule: "ati"
[ 115.424] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 115.434] (II) Module ati: vendor="X.Org Foundation"
[ 115.434] compiled for 1.19.3, module version = 7.9.0
[ 115.434] Module class: X.Org Video Driver
[ 115.434] ABI class: X.Org Video Driver, version 23.0
[ 115.558] (II) LoadModule: "modesetting"
[ 115.558] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 115.559] (II) Module modesetting: vendor="X.Org Foundation"
[ 115.559] compiled for 1.19.3, module version = 1.19.3
[ 115.559] Module class: X.Org Video Driver
[ 115.559] ABI class: X.Org Video Driver, version 23.0
[ 115.559] (II) LoadModule: "fbdev"
[ 115.574] (WW) Warning, couldn't open module fbdev
[ 115.574] (II) UnloadModule: "fbdev"
[ 115.574] (II) Unloading fbdev
[ 115.574] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 115.574] (II) LoadModule: "vesa"
[ 115.574] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 115.574] (II) Module vesa: vendor="X.Org Foundation"
[ 115.574] compiled for 1.19.0, module version = 2.3.4
[ 115.574] Module class: X.Org Video Driver
[ 115.574] ABI class: X.Org Video Driver, version 23.0
[ 115.574] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
ATI Radeon 9800PRO, ATI Radeon 9800XT,
ATI Radeon Mobility 9600/9700 (M10/M11),
ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
ATI FireGL V3350, ATI Mobility Radeon X1450,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
ATI FireGL V3400, ATI Mobility FireGL V5250,
ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
MULLINS, KAVERI, HAWAII
[ 115.575] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 115.575] (II) VESA: driver for VESA chipsets: vesa
[ 115.583] (II) [KMS] Kernel modesetting enabled.
[ 115.583] (WW) Falling back to old probe method for modesetting
[ 115.583] (WW) Falling back to old probe method for vesa
[ 115.584] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 115.584] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 115.584] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 115.584] (==) RADEON(0): Default visual is TrueColor
[ 115.584] (==) RADEON(0): RGB weight 888
[ 115.584] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 115.584] (--) RADEON(0): Chipset: "AMD Radeon HD 6800 Series" (ChipID = 0x6739)
[ 115.584] (II) Loading sub module "fb"
[ 115.584] (II) LoadModule: "fb"
[ 115.585] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 115.608] (II) Module fb: vendor="X.Org Foundation"
[ 115.608] compiled for 1.19.3, module version = 1.0.0
[ 115.608] ABI class: X.Org ANSI C Emulation, version 0.4
[ 115.608] (II) Loading sub module "dri2"
[ 115.608] (II) LoadModule: "dri2"
[ 115.608] (II) Module "dri2" already built-in
[ 115.608] (II) Loading sub module "glamoregl"
[ 115.608] (II) LoadModule: "glamoregl"
[ 115.608] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 115.654] (II) Module glamoregl: vendor="X.Org Foundation"
[ 115.654] compiled for 1.19.3, module version = 1.0.0
[ 115.654] ABI class: X.Org ANSI C Emulation, version 0.4
[ 115.654] (II) glamor: OpenGL accelerated X.org driver based.
[ 116.633] (II) glamor: EGL version 1.4 (DRI2):
[ 116.675] (II) RADEON(0): glamor detected, initialising EGL layer.
[ 116.675] (II) RADEON(0): KMS Color Tiling: enabled
[ 116.675] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 116.675] (==) RADEON(0): TearFree property default: auto
[ 116.675] (II) RADEON(0): KMS Pageflipping: enabled
[ 116.703] (II) RADEON(0): Output DisplayPort-0 has no monitor section
[ 116.733] (II) RADEON(0): Output DisplayPort-1 has no monitor section
[ 116.734] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 116.736] (II) RADEON(0): Output DVI-0 has no monitor section
[ 116.807] (II) RADEON(0): Output DVI-1 has no monitor section
[ 116.836] (II) RADEON(0): EDID for output DisplayPort-0
[ 116.866] (II) RADEON(0): EDID for output DisplayPort-1
[ 116.867] (II) RADEON(0): EDID for output HDMI-0
[ 116.869] (II) RADEON(0): EDID for output DVI-0
[ 116.939] (II) RADEON(0): EDID for output DVI-1
[ 116.939] (II) RADEON(0): Manufacturer: XXX Model: 0 Serial#: 0
[ 116.939] (II) RADEON(0): Year: 2012 Week: 6
[ 116.939] (II) RADEON(0): EDID Version: 1.3
[ 116.939] (II) RADEON(0): Digital Display Input
[ 116.939] (II) RADEON(0): Indeterminate output size
[ 116.939] (II) RADEON(0): Gamma: 1.00
[ 116.939] (II) RADEON(0): No DPMS capabilities specified
[ 116.939] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 116.940] (II) RADEON(0): First detailed timing is preferred mode
[ 116.940] (II) RADEON(0): redX: 0.636 redY: 0.349 greenX: 0.290 greenY: 0.589
[ 116.940] (II) RADEON(0): blueX: 0.143 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
[ 116.940] (II) RADEON(0): Supported established timings:
[ 116.940] (II) RADEON(0): 720x400@70Hz
[ 116.940] (II) RADEON(0): 640x480@60Hz
[ 116.940] (II) RADEON(0): 800x600@56Hz
[ 116.940] (II) RADEON(0): 800x600@60Hz
[ 116.940] (II) RADEON(0): 1024x768@60Hz
[ 116.940] (II) RADEON(0): Manufacturer's mask: 0
[ 116.940] (II) RADEON(0): Supported detailed timing:
[ 116.940] (II) RADEON(0): clock: 65.0 MHz Image Size: 575 x 323 mm
[ 116.940] (II) RADEON(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
[ 116.940] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
[ 116.940] (II) RADEON(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 80 kHz, PixClock max 165 MHz
[ 116.940] (II) RADEON(0): Monitor name: AAA
[ 116.940] (II) RADEON(0): Supported detailed timing:
[ 116.940] (II) RADEON(0): clock: 74.2 MHz Image Size: 0 x 0 mm
[ 116.940] (II) RADEON(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 116.940] (II) RADEON(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 116.940] (II) RADEON(0): Supported detailed timing:
[ 116.940] (II) RADEON(0): clock: 27.0 MHz Image Size: 0 x 0 mm
[ 116.940] (II) RADEON(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 116.940] (II) RADEON(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 116.940] (II) RADEON(0): Supported detailed timing:
[ 116.940] (II) RADEON(0): clock: 74.2 MHz Image Size: 0 x 0 mm
[ 116.940] (II) RADEON(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 116.940] (II) RADEON(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 116.940] (II) RADEON(0): Supported detailed timing:
[ 116.940] (II) RADEON(0): clock: 74.2 MHz Image Size: 708 x 398 mm
[ 116.940] (II) RADEON(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 116.940] (II) RADEON(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 116.940] (II) RADEON(0): Supported detailed timing:
[ 116.940] (II) RADEON(0): clock: 27.0 MHz Image Size: 0 x 0 mm
[ 116.940] (II) RADEON(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 116.940] (II) RADEON(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 116.940] (II) RADEON(0): Number of EDID sections to follow: 1
[ 116.940] (II) RADEON(0): EDID (in hex):
[ 116.940] (II) RADEON(0): 00ffffffffffff006318000000000000
[ 116.940] (II) RADEON(0): 06160103800000000ad7a5a2594a9624
[ 116.940] (II) RADEON(0): 145054a3080001010101010101010101
[ 116.940] (II) RADEON(0): 01010101010164190040410026301888
[ 116.940] (II) RADEON(0): 36003f4321000018000000fd00324c1e
[ 116.940] (II) RADEON(0): 5010000a202020202020000000000000
[ 116.940] (II) RADEON(0): 000000000000000000000000000000fc
[ 116.940] (II) RADEON(0): 004141410a2020202020202020200161
[ 116.940] (II) RADEON(0): 02031f715090050403070206011f1413
[ 116.940] (II) RADEON(0): 12161115202309070765030c00100001
[ 116.940] (II) RADEON(0): 1d007251d01e206e2855000000000000
[ 116.940] (II) RADEON(0): 1e8c0ad08a20e02d10103e9600000000
[ 116.940] (II) RADEON(0): 000018011d80d0721c1620102c258000
[ 116.940] (II) RADEON(0): 000000009e011d00bc52d01e20b82855
[ 116.940] (II) RADEON(0): 40c48e2100001e8c0ad090204031200c
[ 116.940] (II) RADEON(0): 4055000000000000180000000000008b
[ 116.940] (II) RADEON(0): Printing probed modes for output DVI-1
[ 116.940] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 116.940] (II) RADEON(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 116.940] (II) RADEON(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 116.940] (II) RADEON(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 116.940] (II) RADEON(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 116.940] (II) RADEON(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 116.940] (II) RADEON(0): Modeline "1920x1080"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 116.940] (II) RADEON(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 116.940] (II) RADEON(0): Modeline "1920x1080"x24.0 74.18 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 116.940] (II) RADEON(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 116.940] (II) RADEON(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 116.940] (II) RADEON(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 116.940] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 116.940] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 116.940] (II) RADEON(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 116.940] (II) RADEON(0): Modeline "720x576i"x50.0 13.50 720 732 795 864 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 116.940] (II) RADEON(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 116.940] (II) RADEON(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 116.940] (II) RADEON(0): Modeline "720x480i"x60.0 13.51 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
[ 116.940] (II) RADEON(0): Modeline "720x480i"x59.9 13.50 720 739 801 858 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 116.940] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 116.940] (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 116.940] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 116.940] (II) RADEON(0): Output DisplayPort-0 disconnected
[ 116.940] (II) RADEON(0): Output DisplayPort-1 disconnected
[ 116.940] (II) RADEON(0): Output HDMI-0 disconnected
[ 116.940] (II) RADEON(0): Output DVI-0 disconnected
[ 116.940] (II) RADEON(0): Output DVI-1 connected
[ 116.940] (II) RADEON(0): Using exact sizes for initial modes
[ 116.940] (II) RADEON(0): Output DVI-1 using initial mode 1024x768 +0+0
[ 116.940] (II) RADEON(0): mem size init: gart size :3fdde000 vram size: s:40000000 visible:f99d000
[ 116.940] (==) RADEON(0): DPI set to (96, 96)
[ 116.940] (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
[ 116.940] (II) Loading sub module "ramdac"
[ 116.940] (II) LoadModule: "ramdac"
[ 116.940] (II) Module "ramdac" already built-in
[ 116.940] (II) UnloadModule: "modesetting"
[ 116.940] (II) Unloading modesetting
[ 116.940] (II) UnloadModule: "vesa"
[ 116.940] (II) Unloading vesa
[ 116.940] (--) Depth 24 pixmap format is 32 bpp
[ 116.941] (II) RADEON(0): [DRI2] Setup complete
[ 116.941] (II) RADEON(0): [DRI2] DRI driver: r600
[ 116.941] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 116.941] (II) RADEON(0): Front buffer size: 3072K
[ 116.941] (II) RADEON(0): VRAM usage limit set to 227192K
[ 116.942] (II) RADEON(0): SYNC extension fences enabled
[ 116.942] (II) RADEON(0): Present extension enabled
[ 116.942] (==) RADEON(0): DRI3 enabled
[ 116.942] (==) RADEON(0): Backing store enabled
[ 116.942] (II) RADEON(0): Direct rendering enabled
[ 117.180] (II) RADEON(0): Use GLAMOR acceleration.
[ 117.180] (II) RADEON(0): Acceleration enabled
[ 117.180] (==) RADEON(0): DPMS enabled
[ 117.180] (==) RADEON(0): Silken mouse enabled
[ 117.180] (II) RADEON(0): Set up textured video (glamor)
[ 117.180] (II) RADEON(0): [XvMC] Associated with GLAMOR Textured Video.
[ 117.180] (II) RADEON(0): [XvMC] Extension initialized.
[ 117.180] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 117.182] (--) RandR disabled
[ 117.189] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 117.189] (II) AIGLX: enabled GLX_ARB_create_context
[ 117.189] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 117.189] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 117.189] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 117.189] (II) AIGLX: enabled GLX_SGI_swap_control
[ 117.189] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 117.189] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 117.189] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 117.189] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 117.189] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 117.190] (II) AIGLX: Loaded and initialized r600
[ 117.190] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 117.210] (II) RADEON(0): Setting screen physical size to 270 x 203
[ 117.658] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 117.658] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 117.658] (**) Power Button: Applying InputClass "system-keyboard"
[ 117.658] (II) LoadModule: "libinput"
[ 117.658] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 117.706] (II) Module libinput: vendor="X.Org Foundation"
[ 117.706] compiled for 1.19.3, module version = 0.25.1
[ 117.706] Module class: X.Org XInput Driver
[ 117.706] ABI class: X.Org XInput driver, version 24.1
[ 117.706] (II) Using input driver 'libinput' for 'Power Button'
[ 117.706] (**) Power Button: always reports core events
[ 117.706] (**) Option "Device" "/dev/input/event3"
[ 117.706] (**) Option "_source" "server/udev"
[ 117.706] (II) event3 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 117.706] (II) event3 - (II) Power Button: (II) device is a keyboard
[ 117.706] (II) event3 - (II) Power Button: (II) device removed
[ 117.730] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event3"
[ 117.730] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 117.730] (**) Option "xkb_layout" "dvorak"
[ 117.801] (II) event3 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 117.801] (II) event3 - (II) Power Button: (II) device is a keyboard
[ 117.802] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 117.802] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 117.802] (**) Power Button: Applying InputClass "system-keyboard"
[ 117.802] (II) Using input driver 'libinput' for 'Power Button'
[ 117.802] (**) Power Button: always reports core events
[ 117.802] (**) Option "Device" "/dev/input/event2"
[ 117.802] (**) Option "_source" "server/udev"
[ 117.803] (II) event2 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 117.803] (II) event2 - (II) Power Button: (II) device is a keyboard
[ 117.803] (II) event2 - (II) Power Button: (II) device removed
[ 117.820] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event2"
[ 117.820] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 117.820] (**) Option "xkb_layout" "dvorak"
[ 117.821] (II) event2 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 117.821] (II) event2 - (II) Power Button: (II) device is a keyboard
[ 117.823] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event10)
[ 117.823] (II) No input driver specified, ignoring this device.
[ 117.823] (II) This device may have been added with another device file.
[ 117.824] (II) config/udev: Adding input device Kensington Kensington Slimblade Trackball (/dev/input/event0)
[ 117.824] (**) Kensington Kensington Slimblade Trackball: Applying InputClass "libinput pointer catchall"
[ 117.824] (II) Using input driver 'libinput' for 'Kensington Kensington Slimblade Trackball'
[ 117.824] (**) Kensington Kensington Slimblade Trackball: always reports core events
[ 117.824] (**) Option "Device" "/dev/input/event0"
[ 117.825] (**) Option "_source" "server/udev"
[ 117.880] (II) event0 - (II) Kensington Kensington Slimblade Trackball: (II) is tagged by udev as: Mouse Trackball
[ 117.880] (II) event0 - (II) Kensington Kensington Slimblade Trackball: (II) device is a pointer
[ 117.880] (II) event0 - (II) Kensington Kensington Slimblade Trackball: (II) device removed
[ 117.917] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:047D:2041.0002/input/input3/event0"
[ 117.917] (II) XINPUT: Adding extended input device "Kensington Kensington Slimblade Trackball" (type: MOUSE, id 8)
[ 117.917] (**) Option "AccelerationScheme" "none"
[ 117.917] (**) Kensington Kensington Slimblade Trackball: (accel) selected scheme none/0
[ 117.917] (**) Kensington Kensington Slimblade Trackball: (accel) acceleration factor: 2.000
[ 117.917] (**) Kensington Kensington Slimblade Trackball: (accel) acceleration threshold: 4
[ 117.974] (II) event0 - (II) Kensington Kensington Slimblade Trackball: (II) is tagged by udev as: Mouse Trackball
[ 117.974] (II) event0 - (II) Kensington Kensington Slimblade Trackball: (II) device is a pointer
[ 117.975] (II) config/udev: Adding input device Kensington Kensington Slimblade Trackball (/dev/input/mouse0)
[ 117.975] (II) No input driver specified, ignoring this device.
[ 117.975] (II) This device may have been added with another device file.
[ 117.977] (II) config/udev: Adding input device HID 046a:0011 (/dev/input/event1)
[ 117.977] (**) HID 046a:0011: Applying InputClass "libinput keyboard catchall"
[ 117.977] (**) HID 046a:0011: Applying InputClass "system-keyboard"
[ 117.977] (II) Using input driver 'libinput' for 'HID 046a:0011'
[ 117.977] (**) HID 046a:0011: always reports core events
[ 117.977] (**) Option "Device" "/dev/input/event1"
[ 117.977] (**) Option "_source" "server/udev"
[ 117.978] (II) event1 - (II) HID 046a:0011: (II) is tagged by udev as: Keyboard
[ 117.978] (II) event1 - (II) HID 046a:0011: (II) device is a keyboard
[ 117.978] (II) event1 - (II) HID 046a:0011: (II) device removed
[ 118.000] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/0003:046A:0011.0001/input/input2/event1"
[ 118.000] (II) XINPUT: Adding extended input device "HID 046a:0011" (type: KEYBOARD, id 9)
[ 118.000] (**) Option "xkb_layout" "dvorak"
[ 118.002] (II) event1 - (II) HID 046a:0011: (II) is tagged by udev as: Keyboard
[ 118.002] (II) event1 - (II) HID 046a:0011: (II) device is a keyboard
[ 118.002] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event7)
[ 118.002] (II) No input driver specified, ignoring this device.
[ 118.002] (II) This device may have been added with another device file.
[ 118.003] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event8)
[ 118.003] (II) No input driver specified, ignoring this device.
[ 118.003] (II) This device may have been added with another device file.
[ 118.004] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event9)
[ 118.004] (II) No input driver specified, ignoring this device.
[ 118.004] (II) This device may have been added with another device file.
[ 118.005] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event5)
[ 118.005] (II) No input driver specified, ignoring this device.
[ 118.005] (II) This device may have been added with another device file.
[ 118.006] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event6)
[ 118.006] (II) No input driver specified, ignoring this device.
[ 118.006] (II) This device may have been added with another device file.
[ 118.006] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 118.006] (II) No input driver specified, ignoring this device.
[ 118.006] (II) This device may have been added with another device file.
[ 134.200] (II) RADEON(0): EDID vendor "XXX", prod id 0
[ 134.200] (II) RADEON(0): Using EDID range info for horizontal sync
[ 134.200] (II) RADEON(0): Using EDID range info for vertical refresh
[ 134.200] (II) RADEON(0): Printing DDC gathered Modelines:
[ 134.200] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 134.200] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 134.200] (II) RADEON(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 134.200] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 134.200] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 134.200] (II) RADEON(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 134.200] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 134.200] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 134.200] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 134.200] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 134.200] (II) RADEON(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 134.200] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 134.200] (II) RADEON(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
[ 134.200] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 134.200] (II) RADEON(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 134.200] (II) RADEON(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
[ 134.200] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[ 143.007] (II) RADEON(0): EDID vendor "XXX", prod id 0
[ 143.007] (II) RADEON(0): Using hsync ranges from config file
[ 143.007] (II) RADEON(0): Using vrefresh ranges from config file
[ 143.007] (II) RADEON(0): Printing DDC gathered Modelines:
[ 143.007] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 143.007] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 143.007] (II) RADEON(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 143.007] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 143.007] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 143.007] (II) RADEON(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 143.007] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 143.007] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 143.007] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 143.007] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 143.007] (II) RADEON(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 143.007] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 143.007] (II) RADEON(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
[ 143.007] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 143.007] (II) RADEON(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 143.007] (II) RADEON(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
[ 143.007] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[ 380.537] (II) event3 - (II) Power Button: (II) device removed
[ 380.560] (II) event2 - (II) Power Button: (II) device removed
[ 380.583] (II) event0 - (II) Kensington Kensington Slimblade Trackball: (II) device removed
[ 380.624] (II) event1 - (II) HID 046a:0011: (II) device removed
[ 380.653] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 393.211] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 393.346] (II) RADEON(0): EDID vendor "XXX", prod id 0
[ 393.347] (II) RADEON(0): Using hsync ranges from config file
[ 393.347] (II) RADEON(0): Using vrefresh ranges from config file
[ 393.347] (II) RADEON(0): Printing DDC gathered Modelines:
[ 393.347] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 393.347] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 393.347] (II) RADEON(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 393.347] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 393.347] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 393.347] (II) RADEON(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 393.347] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 393.347] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 393.347] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 393.347] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 393.347] (II) RADEON(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 393.347] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 393.347] (II) RADEON(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
[ 393.347] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 393.347] (II) RADEON(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 393.347] (II) RADEON(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
[ 393.347] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[ 393.350] (II) event3 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 393.350] (II) event3 - (II) Power Button: (II) device is a keyboard
[ 393.352] (II) event2 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 393.353] (II) event2 - (II) Power Button: (II) device is a keyboard
[ 393.410] (II) event0 - (II) Kensington Kensington Slimblade Trackball: (II) is tagged by udev as: Mouse Trackball
[ 393.410] (II) event0 - (II) Kensington Kensington Slimblade Trackball: (II) device is a pointer
[ 393.412] (II) event1 - (II) HID 046a:0011: (II) is tagged by udev as: Keyboard
[ 393.412] (II) event1 - (II) HID 046a:0011: (II) device is a keyboard
[ 434.590] (II) event3 - (II) Power Button: (II) device removed
[ 434.604] (II) event2 - (II) Power Button: (II) device removed
[ 434.623] (II) event0 - (II) Kensington Kensington Slimblade Trackball: (II) device removed
[ 434.665] (II) event1 - (II) HID 046a:0011: (II) device removed
[ 434.694] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 443.100] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 443.233] (II) RADEON(0): EDID vendor "XXX", prod id 0
[ 443.233] (II) RADEON(0): Using hsync ranges from config file
[ 443.233] (II) RADEON(0): Using vrefresh ranges from config file
[ 443.233] (II) RADEON(0): Printing DDC gathered Modelines:
[ 443.233] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 443.233] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 443.233] (II) RADEON(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 443.233] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 443.233] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 443.233] (II) RADEON(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 443.233] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 443.233] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 443.233] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 443.233] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 443.233] (II) RADEON(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 443.234] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 443.234] (II) RADEON(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
[ 443.234] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 443.234] (II) RADEON(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 443.234] (II) RADEON(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
[ 443.234] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[ 443.236] (II) event3 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 443.236] (II) event3 - (II) Power Button: (II) device is a keyboard
[ 443.238] (II) event2 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 443.238] (II) event2 - (II) Power Button: (II) device is a keyboard
[ 443.294] (II) event0 - (II) Kensington Kensington Slimblade Trackball: (II) is tagged by udev as: Mouse Trackball
[ 443.294] (II) event0 - (II) Kensington Kensington Slimblade Trackball: (II) device is a pointer
[ 443.296] (II) event1 - (II) HID 046a:0011: (II) is tagged by udev as: Keyboard
[ 443.296] (II) event1 - (II) HID 046a:0011: (II) device is a keyboard
[ 457.365] (II) event3 - (II) Power Button: (II) device removed
[ 457.390] (II) event2 - (II) Power Button: (II) device removed
[ 457.410] (II) event0 - (II) Kensington Kensington Slimblade Trackball: (II) device removed
[ 457.474] (II) event1 - (II) HID 046a:0011: (II) device removed
[ 457.493] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 475.440] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 475.557] (II) RADEON(0): EDID vendor "XXX", prod id 0
[ 475.557] (II) RADEON(0): Using hsync ranges from config file
[ 475.557] (II) RADEON(0): Using vrefresh ranges from config file
[ 475.557] (II) RADEON(0): Printing DDC gathered Modelines:
[ 475.558] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 475.558] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 475.558] (II) RADEON(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 475.558] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 475.558] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 475.558] (II) RADEON(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 475.558] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 475.558] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 475.558] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 475.558] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 475.558] (II) RADEON(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 475.558] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 475.558] (II) RADEON(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
[ 475.558] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 475.558] (II) RADEON(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 475.558] (II) RADEON(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
[ 475.558] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[ 475.560] (II) event3 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 475.560] (II) event3 - (II) Power Button: (II) device is a keyboard
[ 475.561] (II) event2 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 475.561] (II) event2 - (II) Power Button: (II) device is a keyboard
[ 475.617] (II) event0 - (II) Kensington Kensington Slimblade Trackball: (II) is tagged by udev as: Mouse Trackball
[ 475.617] (II) event0 - (II) Kensington Kensington Slimblade Trackball: (II) device is a pointer
[ 475.619] (II) event1 - (II) HID 046a:0011: (II) is tagged by udev as: Keyboard
[ 475.619] (II) event1 - (II) HID 046a:0011: (II) device is a keyboard
[ 505.274] (II) event3 - (II) Power Button: (II) device removed
[ 505.300] (II) event2 - (II) Power Button: (II) device removed
[ 505.320] (II) event0 - (II) Kensington Kensington Slimblade Trackball: (II) device removed
[ 505.361] (II) event1 - (II) HID 046a:0011: (II) device removed
[ 505.380] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 511.047] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 511.165] (II) RADEON(0): EDID vendor "XXX", prod id 0
[ 511.165] (II) RADEON(0): Using hsync ranges from config file
[ 511.165] (II) RADEON(0): Using vrefresh ranges from config file
[ 511.165] (II) RADEON(0): Printing DDC gathered Modelines:
[ 511.165] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 511.165] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 511.165] (II) RADEON(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 511.165] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 511.165] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 511.165] (II) RADEON(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 511.165] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 511.165] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 511.165] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 511.165] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 511.165] (II) RADEON(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 511.165] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 511.165] (II) RADEON(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
[ 511.165] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 511.165] (II) RADEON(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 511.165] (II) RADEON(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
[ 511.165] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[ 511.167] (II) event3 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 511.167] (II) event3 - (II) Power Button: (II) device is a keyboard
[ 511.167] (II) event2 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 511.167] (II) event2 - (II) Power Button: (II) device is a keyboard
[ 511.224] (II) event0 - (II) Kensington Kensington Slimblade Trackball: (II) is tagged by udev as: Mouse Trackball
[ 511.224] (II) event0 - (II) Kensington Kensington Slimblade Trackball: (II) device is a pointer
[ 511.226] (II) event1 - (II) HID 046a:0011: (II) is tagged by udev as: Keyboard
[ 511.226] (II) event1 - (II) HID 046a:0011: (II) device is a keyboard
[ 1063.720] (II) RADEON(0): EDID vendor "XXX", prod id 0
[ 1063.720] (II) RADEON(0): Using hsync ranges from config file
[ 1063.720] (II) RADEON(0): Using vrefresh ranges from config file
[ 1063.720] (II) RADEON(0): Printing DDC gathered Modelines:
[ 1063.720] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 1063.720] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 1063.720] (II) RADEON(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 1063.720] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 1063.720] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 1063.720] (II) RADEON(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 1063.720] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1063.720] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 1063.720] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1063.720] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1063.720] (II) RADEON(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 1063.720] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 1063.720] (II) RADEON(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
[ 1063.720] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 1063.720] (II) RADEON(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 1063.720] (II) RADEON(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
[ 1063.720] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[ 1064.480] (II) RADEON(0): EDID vendor "XXX", prod id 0
[ 1064.480] (II) RADEON(0): Using hsync ranges from config file
[ 1064.480] (II) RADEON(0): Using vrefresh ranges from config file
[ 1064.480] (II) RADEON(0): Printing DDC gathered Modelines:
[ 1064.480] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 1064.480] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 1064.480] (II) RADEON(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 1064.480] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 1064.480] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 1064.480] (II) RADEON(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 1064.480] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1064.480] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 1064.480] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1064.480] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1064.480] (II) RADEON(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 1064.480] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 1064.480] (II) RADEON(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
[ 1064.480] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 1064.480] (II) RADEON(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 1064.480] (II) RADEON(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
[ 1064.480] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[ 1081.183] (II) RADEON(0): EDID vendor "XXX", prod id 0
[ 1081.183] (II) RADEON(0): Using hsync ranges from config file
[ 1081.183] (II) RADEON(0): Using vrefresh ranges from config file
[ 1081.183] (II) RADEON(0): Printing DDC gathered Modelines:
[ 1081.183] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 1081.183] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 1081.183] (II) RADEON(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 1081.183] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 1081.183] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 1081.183] (II) RADEON(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 1081.183] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1081.183] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 1081.183] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1081.183] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1081.183] (II) RADEON(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 1081.183] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 1081.184] (II) RADEON(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
[ 1081.184] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 1081.184] (II) RADEON(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 1081.184] (II) RADEON(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
[ 1081.184] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[ 1083.953] (II) RADEON(0): EDID vendor "XXX", prod id 0
[ 1083.953] (II) RADEON(0): Using hsync ranges from config file
[ 1083.953] (II) RADEON(0): Using vrefresh ranges from config file
[ 1083.953] (II) RADEON(0): Printing DDC gathered Modelines:
[ 1083.953] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 1083.953] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 1083.953] (II) RADEON(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 1083.953] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 1083.953] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 1083.953] (II) RADEON(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 1083.953] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1083.953] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 1083.954] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1083.954] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1083.954] (II) RADEON(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 1083.954] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 1083.954] (II) RADEON(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
[ 1083.954] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 1083.954] (II) RADEON(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 1083.954] (II) RADEON(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
[ 1083.954] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)I've found the reason causing the "unable to connect to x server" error message, there is an "xinput" command in the fish global rc file. after removing that line , there is no "unable to connect to x server" message when log in to tty. so seems this "unable to connect to x server" error has nothing to do with my monitor problem.
another thing I found is that, when the boot fails ( "no signal" ), the last message before the blank screen is :
kvm: disabled by biosand by looking at dmesg, I found this message in it, several lines below it is :
[drm] radeon kernel modesetting enabled.since I'm newbee, I don't understand kernel yet so I never dare to do look at that when trying to figure things out myself. sorry guys if that make things complex. but this time I tried it, I see that there is "radeon" part just after the "kvm" message and the screen goes blank exactly after the "kvm" message. maybe next time the boot fails, the kernel log can show what goes wrong. I know I can read previous boot kernel logs but now I can't remember which boot failed, I will post kernel message the next failure.
about switching VT, I already switched with CTRL+ALT+F-keys before, no luck , there is nothing displayed. I even tried CTRL-ALT-DEL, when boot succeeds, this key combo restart the machine, but when blank screen this doesn't work neither.
Last edited by socialloser1 (2017-08-03 12:36:36)
Offline
#6 2017-08-03 12:48:09
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,877
Re: [solved] "no signal" after boot, disbling KMS temporarily works
Let's start with the obvious:
1. There *is* a HDMI output, so remove the adapter.
2. You're driving a 16:9 monitor @ 4:3 XGA, which is for some strange reason the preferred mode (I guess because of the adapther) despite you've FullHD announced
Assuming the HDMI output is a clone on one DP output and you really cannot connect HDMI directly,
1. try whether you can switch to FullHD
xrandr --output DVI-1 --mode 1920x10802. Try to disable the framebuffer console to get this mode change out of the way: https://wiki.archlinux.org/index.php/GR … ramebuffer
3. Add /etc/X11/xorg.conf.d/11-dvi_1_full_hd.conf
Section "Monitor"
Identifier "DVI-1"
Option "PreferredMode" "1920x1080"
EndSectionOffline
#7 2017-08-03 13:38:56
- socialloser1
- Member
- Registered: 2017-04-04
- Posts: 32
Re: [solved] "no signal" after boot, disbling KMS temporarily works
seth wrote:
Let's start with the obvious:
1. There *is* a HDMI output, so remove the adapter.
2. You're driving a 16:9 monitor @ 4:3 XGA, which is for some strange reason the preferred mode (I guess because of the adapther) despite you've FullHD announced
yes , I see now , there is an hdmi output on the PC graphic card, but I only have dvi to hdmi cable now.
my monitor is a 4:3 monitor with best resolution at 1024x768. a very small monitor but have hdmi port. it is not an old monitor but instead a kind of hacker stuff, this monitor is made from a Fujitsu tablet screen, it works out of the box and never cause any problem.
I don't know how you get the info that my monitor is 16:9, I used to have a monitor, which is 16:9, I can't remeber if that 16:9 monitor has been used on this machine or not.
I tried the command
xrandr --output DVI-1 --mode 1920x1080, it changed the screen resolution, which is not the best resolution for this monitor so the image is not good but it works.
at this time , I called the info bar mentioned in the original post using buttons on the monitor , it displays "HDMI 1080@60Hz", still HDMI instead of DVI.
I disabled the framebuffer by changing grub file and grub-mkconfig, rebooted, this time the grub screen becomes blurred, nothing else changed , this time the boot succeeded, change from DVI to HDMI and shows the TTY prompt. but because the problem happens randomly, I don't know if solved the problem or not.
by the way, there seems to be a pattern, that if I keep my machine on for a little while, say , longer than half an hour , then latter reboot will always ( or with a very high possibility ) succeed , but if I shutdown the machine for long enough, the first boot will always fail. it is the fourth day since the problem first happens, I never booted successfully the first time boot every morning!
about change the /etc/X11/xorg.conf.d/11-dvi_1_full_hd.conf file, I did as what you say, when booted to TTY prompt, the monitor is still switched from DVI to HDMI, with resolution 1024x768, when I manually start the lxdm service , log in to desktop, the resolution is now 1080p , but monitor still shows "HDMI 1080@60Hz".
by the way, the main problem happened exactly just before the TTY prompt, I doubt the main cause has anything to do with the desktop settings, because I have already disabled lxdm, at the lucky times when the boot succeed, it stops at the TTY prompt.
by the current time , the machine works well now even I reboot it again and again, but most likely it will fail again after I shut it down for several hours. according to my experience, such kind of random behaviours is mostly like be caused by hardware problems.
Last edited by socialloser1 (2017-08-03 14:35:49)
Offline
#8 2017-08-03 14:42:55
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,877
Re: [solved] "no signal" after boot, disbling KMS temporarily works
I took that from the 1080p resolution (and because it's the likely thing ;-), which however seems to be injected by the converter. You can of course drop the 11-dvi_1_full_hd.conf.
No idea how the screen determines DVI and HDMI input - usually they show what's connected on *their* side, ie. you'd have two systems attached to one monitor - one via DVI and one via HDMI ... unless that OSB comes from the DVI/HDMI converter.
Keep the VGA console for a while and see whether your perceived pattern still holds.
If you can, try to use a pure DVI or pure HDMI connection.
The cold boot issue is interesting - you could try to un- and replug the cable before a cold and a warm boot (best remove it after the shutdown and plug it right before the boot) and see whether that makes a difference in any direction.
Offline
#9 2017-08-04 02:43:50
- socialloser1
- Member
- Registered: 2017-04-04
- Posts: 32
Re: [solved] "no signal" after boot, disbling KMS temporarily works
seth wrote:
Keep the VGA console for a while and see whether your perceived pattern still holds.
If you can, try to use a pure DVI or pure HDMI connection.
My English is bad so I can't understand what "VGA console" is , searching online didn't help, so this sentence is not understandable 
if you mean keep the monitor "warm up" for a long time , that doesn't work. I don't have VGA cables at hand right now.
it is more and more likely to be a hardware problem, but the most weird part is that , when the screen goes blank , the CTRL-ALT-DEL combo will not reboot the machine --- which I can confirm by seeing that my dvd-driver does not scan for a boot disk, and the BIOS welcoming screen is always displayed correctly and other stuff like harddisk indicator, it just hangs there. in short , it seems to be failed to boot to the TTY stage , instead of successfully get to TTY but just can't displaying it.
if that is the case, I think the most likely part of problem is that the graphic card is damaged or something wrong happend when kernel driver is being load ( as I mentioned above ), anyway I guess the key answer lies in the kernel log when booting fails.
today the first boot succeeded, I 've restored everything yesterday, so nothing fixed it, it just recovers by itself. but moment ago a reboot fails, I got all dmesg logs compared, interestingly , seems the dmesg log stopped at the middile of booting process, I post both logs and the difference lines here:
a successful boot:
: Linux version 4.12.3-1-ARCH (builduser@nspawn-13499) (gcc version 7.1.1 20170630 (GCC) ) #1 SMP PREEMPT Sat Jul 22 15:32:02 UTC 2017
: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=60e3edd4-4770-4ab8-acbc-b6593db99e7e rw quiet
: x86/fpu: x87 FPU will use FXSAVE
: e820: BIOS-provided physical RAM map:
: BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
: BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
: BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
: BIOS-e820: [mem 0x0000000000100000-0x00000000cfe7ffff] usable
: BIOS-e820: [mem 0x00000000cfe80000-0x00000000cfe97fff] ACPI data
: BIOS-e820: [mem 0x00000000cfe98000-0x00000000cfebffff] ACPI NVS
: BIOS-e820: [mem 0x00000000cfec0000-0x00000000cfefffff] reserved
: BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
: BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
: NX (Execute Disable) protection: active
: SMBIOS 2.5 present.
: DMI: System manufacturer System Product Name/M5A78L-M LX3, BIOS 1201 04/19/2013
: tsc: Fast TSC calibration using PIT
: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
: e820: remove [mem 0x000a0000-0x000fffff] usable
: AGP: No AGP bridge found
: e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
: MTRR default type: uncachable
: MTRR fixed ranges enabled:
: 00000-9FFFF write-back
: A0000-EFFFF uncachable
: F0000-FFFFF write-protect
: MTRR variable ranges enabled:
: 0 base 000000000000 mask FFFF80000000 write-back
: 1 base 000080000000 mask FFFFC0000000 write-back
: 2 base 0000C0000000 mask FFFFF0000000 write-back
: 3 disabled
: 4 disabled
: 5 disabled
: 6 disabled
: 7 disabled
: TOM2: 0000000130000000 aka 4864M
: x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
: e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
: e820: last_pfn = 0xcfe80 max_arch_pfn = 0x400000000
: found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff9398c00ff780]
: Scanning 1 areas for low memory corruption
: Base memory trampoline at [ffff9398c0099000] 99000 size 24576
: Using GB pages for direct mapping
: BRK [0x7ad5f000, 0x7ad5ffff] PGTABLE
: BRK [0x7ad60000, 0x7ad60fff] PGTABLE
: BRK [0x7ad61000, 0x7ad61fff] PGTABLE
: BRK [0x7ad62000, 0x7ad62fff] PGTABLE
: BRK [0x7ad63000, 0x7ad63fff] PGTABLE
: RAMDISK: [mem 0x373b7000-0x379d2fff]
: ACPI: Early table checksum verification disabled
: ACPI: RSDP 0x00000000000FBA40 000024 (v02 ACPIAM)
: ACPI: XSDT 0x00000000CFE80100 000054 (v01 041913 XSDT1304 20130419 MSFT 00000097)
: ACPI: FACP 0x00000000CFE80290 0000F4 (v03 041913 FACP1304 20130419 MSFT 00000097)
: ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170303/tbfadt-658)
: ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20170303/tbfadt-603)
: ACPI: DSDT 0x00000000CFE80460 00D3E9 (v01 A2035 A2035001 00000001 INTL 20060113)
: ACPI: FACS 0x00000000CFE98000 000040
: ACPI: FACS 0x00000000CFE98000 000040
: ACPI: APIC 0x00000000CFE80390 00008C (v01 041913 APIC1304 20130419 MSFT 00000097)
: ACPI: MCFG 0x00000000CFE80420 00003C (v01 041913 OEMMCFG 20130419 MSFT 00000097)
: ACPI: OEMB 0x00000000CFE98040 000072 (v01 041913 OEMB1304 20130419 MSFT 00000097)
: ACPI: HPET 0x00000000CFE8F460 000038 (v01 041913 OEMHPET 20130419 MSFT 00000097)
: ACPI: SSDT 0x00000000CFE8F4A0 0008BC (v01 A M I POWERNOW 00000001 AMD 00000001)
: ACPI: Local APIC address 0xfee00000
: Scanning NUMA topology in Northbridge 24
: No NUMA configuration found
: Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
: NODE_DATA(0) allocated [mem 0x12fff9000-0x12fffdfff]
: Zone ranges:
: DMA [mem 0x0000000000001000-0x0000000000ffffff]
: DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
: Normal [mem 0x0000000100000000-0x000000012fffffff]
: Device empty
: Movable zone start for each node
: Early memory node ranges
: node 0: [mem 0x0000000000001000-0x000000000009efff]
: node 0: [mem 0x0000000000100000-0x00000000cfe7ffff]
: node 0: [mem 0x0000000100000000-0x000000012fffffff]
: Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff]
: On node 0 totalpages: 1048094
: DMA zone: 64 pages used for memmap
: DMA zone: 21 pages reserved
: DMA zone: 3998 pages, LIFO batch:0
: DMA32 zone: 13242 pages used for memmap
: DMA32 zone: 847488 pages, LIFO batch:31
: Normal zone: 3072 pages used for memmap
: Normal zone: 196608 pages, LIFO batch:31
: ACPI: PM-Timer IO Port: 0x808
: ACPI: Local APIC address 0xfee00000
: IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
: ACPI: IRQ0 used by override.
: ACPI: IRQ9 used by override.
: Using ACPI (MADT) for SMP configuration information
: ACPI: HPET id: 0x8300 base: 0xfed00000
: smpboot: Allowing 8 CPUs, 4 hotplug CPUs
: PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
: PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
: PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
: PM: Registered nosave memory: [mem 0xcfe80000-0xcfe97fff]
: PM: Registered nosave memory: [mem 0xcfe98000-0xcfebffff]
: PM: Registered nosave memory: [mem 0xcfec0000-0xcfefffff]
: PM: Registered nosave memory: [mem 0xcff00000-0xffdfffff]
: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
: e820: [mem 0xcff00000-0xffdfffff] available for PCI devices
: Booting paravirtualized kernel on bare hardware
: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
: percpu: Embedded 35 pages/cpu @ffff9399efc00000 s106328 r8192 d28840 u262144
: pcpu-alloc: s106328 r8192 d28840 u262144 alloc=1*2097152
: pcpu-alloc: [0] 0 1 2 3 4 5 6 7
: Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031695
: Policy zone: Normal
: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=60e3edd4-4770-4ab8-acbc-b6593db99e7e rw quiet
: PID hash table entries: 4096 (order: 3, 32768 bytes)
: AGP: Checking aperture...
: AGP: No AGP bridge found
: AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
: AGP: Your BIOS doesn't leave an aperture memory hole
: AGP: Please enable the IOMMU option in the BIOS setup
: AGP: This costs you 64MB of RAM
: AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
: PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
: Memory: 3974064K/4192376K available (6539K kernel code, 1124K rwdata, 2048K rodata, 1324K init, 912K bss, 218312K reserved, 0K cma-reserved)
: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
: ftrace: allocating 27931 entries in 110 pages
: Preemptible hierarchical RCU implementation.
: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
: NR_IRQS:8448 nr_irqs:488 16
: spurious 8259A interrupt: IRQ7.
: Console: colour dummy device 80x25
: console [tty0] enabled
: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
: hpet clockevent registered
: tsc: Fast TSC calibration using PIT
: tsc: Detected 3214.415 MHz processor
: Calibrating delay loop (skipped), value calculated using timer frequency.. 6431.69 BogoMIPS (lpj=10714716)
: pid_max: default: 32768 minimum: 301
: ACPI: Core revision 20170303
: ACPI: 2 ACPI AML tables successfully acquired and loaded
: Security Framework initialized
: Yama: becoming mindful.
: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
: CPU: Physical Processor ID: 0
: CPU: Processor Core ID: 0
: mce: CPU supports 6 MCE banks
: LVT offset 0 assigned for vector 0xf9
: Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
: Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
: Freeing SMP alternatives memory: 24K
: smpboot: Max logical packages: 2
: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
: smpboot: CPU0: AMD Phenom(tm) II X4 955 Processor (family: 0x10, model: 0x4, stepping: 0x3)
: Performance Events: AMD PMU driver.
: ... version: 0
: ... bit width: 48
: ... generic registers: 4
: ... value mask: 0000ffffffffffff
: ... max period: 00007fffffffffff
: ... fixed-purpose events: 0
: ... event mask: 000000000000000f
: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
: smp: Bringing up secondary CPUs ...
: x86: Booting SMP configuration:
: .... node #0, CPUs: #1 #2 #3
: smp: Brought up 1 node, 4 CPUs
: smpboot: Total of 4 processors activated (25725.15 BogoMIPS)
: sched_clock: Marking stable (419999958, 0)->(531912673, -111912715)
: devtmpfs: initialized
: x86/mm: Memory block size: 128MB
: PM: Registering ACPI NVS region [mem 0xcfe98000-0xcfebffff] (163840 bytes)
: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
: futex hash table entries: 2048 (order: 5, 131072 bytes)
: pinctrl core: initialized pinctrl subsystem
: RTC time: 2:19:01, date: 08/04/17
: NET: Registered protocol family 16
: cpuidle: using governor ladder
: cpuidle: using governor menu
: PCCT header not found.
: node 0 link 0: io port [1000, ffffff]
: TOM: 00000000d0000000 aka 3328M
: Fam 10h mmconf [mem 0xe0000000-0xefffffff]
: node 0 link 0: mmio [a0000, bffff]
: node 0 link 0: mmio [d0000000, dfffffff]
: node 0 link 0: mmio [e0000000, efffffff] ==> none
: node 0 link 0: mmio [f0000000, ffdfffff]
: TOM2: 0000000130000000 aka 4864M
: bus: [bus 00-1f] on node 0 link 0
: bus: 00 [io 0x0000-0xffff]
: bus: 00 [mem 0x000a0000-0x000bffff]
: bus: 00 [mem 0xd0000000-0xdfffffff]
: bus: 00 [mem 0xf0000000-0xffffffff]
: bus: 00 [mem 0x130000000-0xfcffffffff]
: ACPI: bus type PCI registered
: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
: PCI: not using MMCONFIG
: PCI: Using configuration type 1 for base access
: PCI: Using configuration type 1 for extended access
: mtrr: your CPUs had inconsistent variable MTRR settings
: mtrr: probably your BIOS does not setup all CPUs.
: mtrr: corrected configuration.
: HugeTLB registered 1 GB page size, pre-allocated 0 pages
: HugeTLB registered 2 MB page size, pre-allocated 0 pages
: ACPI: Added _OSI(Module Device)
: ACPI: Added _OSI(Processor Device)
: ACPI: Added _OSI(3.0 _SCP Extensions)
: ACPI: Added _OSI(Processor Aggregator Device)
: ACPI: Executed 3 blocks of module-level executable AML code
: ACPI: Interpreter enabled
: ACPI: (supports S0 S1 S3 S4 S5)
: ACPI: Using IOAPIC for interrupt routing
: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
: acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
: PCI host bridge to bus 0000:00
: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
: pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff window]
: pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
: pci_bus 0000:00: root bus resource [bus 00-ff]
: pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
: pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
: pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
: pci 0000:00:02.0: System wakeup disabled by ACPI
: pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
: pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
: pci 0000:00:04.0: System wakeup disabled by ACPI
: pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
: pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
: pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
: pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
: pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
: pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
: pci 0000:00:11.0: reg 0x24: [mem 0xfe9ffc00-0xfe9fffff]
: pci 0000:00:11.0: set SATA to AHCI mode
: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
: pci 0000:00:12.0: reg 0x10: [mem 0xfe9fe000-0xfe9fefff]
: pci 0000:00:12.0: System wakeup disabled by ACPI
: pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
: pci 0000:00:12.1: reg 0x10: [mem 0xfe9fd000-0xfe9fdfff]
: pci 0000:00:12.1: System wakeup disabled by ACPI
: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
: pci 0000:00:12.2: reg 0x10: [mem 0xfe9ff800-0xfe9ff8ff]
: pci 0000:00:12.2: supports D1 D2
: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
: pci 0000:00:12.2: System wakeup disabled by ACPI
: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
: pci 0000:00:13.0: reg 0x10: [mem 0xfe9fc000-0xfe9fcfff]
: pci 0000:00:13.0: System wakeup disabled by ACPI
: pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
: pci 0000:00:13.1: reg 0x10: [mem 0xfe9fb000-0xfe9fbfff]
: pci 0000:00:13.1: System wakeup disabled by ACPI
: pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
: pci 0000:00:13.2: reg 0x10: [mem 0xfe9ff400-0xfe9ff4ff]
: pci 0000:00:13.2: supports D1 D2
: pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
: pci 0000:00:13.2: System wakeup disabled by ACPI
: pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
: pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
: pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
: pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
: pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
: pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
: pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
: pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
: pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
: pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
: pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
: pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
: pci 0000:00:14.2: reg 0x10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
: pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
: pci 0000:00:14.2: System wakeup disabled by ACPI
: pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
: pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
: pci 0000:00:14.4: System wakeup disabled by ACPI
: pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
: pci 0000:00:14.5: reg 0x10: [mem 0xfe9fa000-0xfe9fafff]
: pci 0000:00:14.5: System wakeup disabled by ACPI
: pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
: pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
: pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
: pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
: pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
: pci 0000:01:00.0: [1002:6739] type 00 class 0x030000
: pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
: pci 0000:01:00.0: reg 0x18: [mem 0xfeae0000-0xfeafffff 64bit]
: pci 0000:01:00.0: reg 0x20: [io 0xd000-0xd0ff]
: pci 0000:01:00.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
: pci 0000:01:00.0: supports D1 D2
: pci 0000:01:00.1: [1002:aa88] type 00 class 0x040300
: pci 0000:01:00.1: reg 0x10: [mem 0xfeabc000-0xfeabffff 64bit]
: pci 0000:01:00.1: supports D1 D2
: pci 0000:00:02.0: PCI bridge to [bus 01]
: pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
: pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
: pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
: pci 0000:02:00.0: [1969:1091] type 00 class 0x020000
: pci 0000:02:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
: pci 0000:02:00.0: reg 0x18: [io 0xec00-0xec7f]
: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
: pci 0000:02:00.0: System wakeup disabled by ACPI
: pci 0000:00:04.0: PCI bridge to [bus 02]
: pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
: pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff]
: pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
: pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
: pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
: pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
: pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
: pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff window] (subtractive decode)
: pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
: ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 12 14 15)
: ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
: ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
: ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
: ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
: ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
: ACPI: PCI Interrupt Link [LNKG] (IRQs *11)
: ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
: ACPI: Enabled 1 GPEs in block 00 to 1F
: pci 0000:01:00.0: vgaarb: setting as boot VGA device
: pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
: pci 0000:01:00.0: vgaarb: bridge control possible
: vgaarb: loaded
: EDAC MC: Ver: 3.0.0
: PCI: Using ACPI for IRQ routing
: PCI: pci_cache_line_size set to 64 bytes
: e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
: e820: reserve RAM buffer [mem 0xcfe80000-0xcfffffff]
: NetLabel: Initializing
: NetLabel: domain hash size = 128
: NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
: NetLabel: unlabeled traffic allowed by default
: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
: hpet0: 4 comparators, 32-bit 14.318180 MHz counter
: clocksource: Switched to clocksource hpet
: VFS: Disk quotas dquot_6.6.0
: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
: pnp: PnP ACPI init
: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
: pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
: pnp 00:02: [dma 0 disabled]
: pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
: system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
: system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
: system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
: system 00:04: [io 0x04d0-0x04d1] has been reserved
: system 00:04: [io 0x040b] has been reserved
: system 00:04: [io 0x04d6] has been reserved
: system 00:04: [io 0x0c00-0x0c01] has been reserved
: system 00:04: [io 0x0c14] has been reserved
: system 00:04: [io 0x0c50-0x0c51] has been reserved
: system 00:04: [io 0x0c52] has been reserved
: system 00:04: [io 0x0c6c] has been reserved
: system 00:04: [io 0x0c6f] has been reserved
: system 00:04: [io 0x0cd0-0x0cd1] has been reserved
: system 00:04: [io 0x0cd2-0x0cd3] has been reserved
: system 00:04: [io 0x0cd4-0x0cd5] has been reserved
: system 00:04: [io 0x0cd6-0x0cd7] has been reserved
: system 00:04: [io 0x0cd8-0x0cdf] has been reserved
: system 00:04: [io 0x0b00-0x0b3f] has been reserved
: system 00:04: [io 0x0800-0x089f] has been reserved
: system 00:04: [io 0x0b00-0x0b0f] has been reserved
: system 00:04: [io 0x0b20-0x0b3f] has been reserved
: system 00:04: [io 0x0900-0x090f] has been reserved
: system 00:04: [io 0x0910-0x091f] has been reserved
: system 00:04: [io 0xfe00-0xfefe] has been reserved
: system 00:04: [mem 0xcff00000-0xcfffffff] has been reserved
: system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved
: system 00:04: [mem 0xfec10000-0xfec1001f] has been reserved
: system 00:04: [mem 0xfed40000-0xfed44fff] has been reserved
: system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
: system 00:05: [io 0x0230-0x023f] has been reserved
: system 00:05: [io 0x0290-0x029f] has been reserved
: system 00:05: [io 0x0300-0x030f] has been reserved
: system 00:05: [io 0x0a30-0x0a3f] has been reserved
: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
: system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
: system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
: system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
: system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
: system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
: system 00:07: [mem 0x00100000-0xcfefffff] could not be reserved
: system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved
: system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
: pnp: PnP ACPI: found 8 devices
: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
: pci 0000:00:02.0: PCI bridge to [bus 01]
: pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
: pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
: pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
: pci 0000:00:04.0: PCI bridge to [bus 02]
: pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
: pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff]
: pci 0000:00:14.4: PCI bridge to [bus 03]
: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
: pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
: pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff window]
: pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
: pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
: pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
: pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
: pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
: pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
: pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
: pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
: pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
: pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
: pci_bus 0000:03: resource 8 [mem 0xcff00000-0xdfffffff window]
: pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff window]
: NET: Registered protocol family 2
: TCP established hash table entries: 32768 (order: 6, 262144 bytes)
: TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
: TCP: Hash tables configured (established 32768 bind 32768)
: UDP hash table entries: 2048 (order: 4, 65536 bytes)
: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
: NET: Registered protocol family 1
: pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
: pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
: PCI: CLS 64 bytes, default 64
: Unpacking initramfs...
: Freeing initrd memory: 6256K
: PCI-DMA: Disabling AGP.
: PCI-DMA: aperture base @ c4000000 size 65536 KB
: PCI-DMA: using GART IOMMU.
: PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
: LVT offset 1 assigned for vector 0x400
: IBS: LVT offset 1 assigned
: perf: AMD IBS detected (0x0000001f)
: Scanning for low memory corruption every 60 seconds
: Initialise system trusted keyrings
: Key type blacklist registered
: workingset: timestamp_bits=40 max_order=20 bucket_order=0
: zbud: loaded
: Key type asymmetric registered
: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
: io scheduler noop registered
: io scheduler deadline registered
: io scheduler cfq registered (default)
: io scheduler mq-deadline registered
: io scheduler kyber registered
: io scheduler bfq registered
: vesafb: mode is 1024x768x32, linelength=4096, pages=0
: vesafb: scrolling: redraw
: vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
: vesafb: framebuffer at 0xd0000000, mapped to 0xffffa1a040c00000, using 3072k, total 3072k
: Console: switching to colour frame buffer device 128x48
: fb0: VESA VGA frame buffer device
: GHES: HEST is not enabled!
: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
: 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
: Linux agpgart interface v0.103
: rtc_cmos 00:01: RTC can wake from S4
: rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
: rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
: ledtrig-cpu: registered to indicate activity on CPUs
: vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
: NET: Registered protocol family 10
: Segment Routing with IPv6
: NET: Registered protocol family 17
: RAS: Correctable Errors collector initialized.
: microcode: CPU0: patch_level=0x010000c8
: microcode: CPU1: patch_level=0x010000c8
: microcode: CPU2: patch_level=0x010000c8
: microcode: CPU3: patch_level=0x010000c8
: microcode: Microcode Update Driver: v2.2.
: registered taskstats version 1
: Loading compiled-in X.509 certificates
: zswap: loaded using pool lzo/zbud
: Magic number: 13:790:307
: tty tty36: hash matches
: rtc_cmos 00:01: setting system clock to 2017-08-04 02:19:02 UTC (1501813142)
: PM: Hibernation image not present or could not be loaded.
: Freeing unused kernel memory: 1324K
: Write protecting the kernel read-only data: 10240k
: Freeing unused kernel memory: 1640K
: i8042: PNP: No PS/2 controller found.
: i8042: Probing ports directly.
: serio: i8042 KBD port at 0x60,0x64 irq 1
: serio: i8042 AUX port at 0x60,0x64 irq 12
: SCSI subsystem initialized
: ACPI: bus type USB registered
: usbcore: registered new interface driver usbfs
: usbcore: registered new interface driver hub
: usbcore: registered new device driver usb
: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
: ehci-pci: EHCI PCI platform driver
: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
: ehci-pci 0000:00:12.2: EHCI Host Controller
: ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
: ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
: ehci-pci 0000:00:12.2: debug port 1
: ehci-pci 0000:00:12.2: irq 17, io mem 0xfe9ff800
: libata version 3.00 loaded.
: ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
: hub 1-0:1.0: USB hub found
: hub 1-0:1.0: 6 ports detected
: ehci-pci 0000:00:13.2: EHCI Host Controller
: ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
: ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
: ehci-pci 0000:00:13.2: debug port 1
: ehci-pci 0000:00:13.2: irq 19, io mem 0xfe9ff400
: ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
: hub 2-0:1.0: USB hub found
: hub 2-0:1.0: 6 ports detected
: ahci 0000:00:11.0: version 3.0
: ohci-pci: OHCI PCI platform driver
: ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
: ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
: scsi host0: ahci
: scsi host1: ahci
: scsi host2: ahci
: scsi host3: ahci
: ata1: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 22
: ata2: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 22
: ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 22
: ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 22
: scsi host4: pata_atiixp
: scsi host5: pata_atiixp
: ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
: ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
: ohci-pci 0000:00:12.0: OHCI PCI host controller
: ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
: ohci-pci 0000:00:12.0: irq 16, io mem 0xfe9fe000
: hub 3-0:1.0: USB hub found
: hub 3-0:1.0: 3 ports detected
: ohci-pci 0000:00:12.1: OHCI PCI host controller
: ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
: ohci-pci 0000:00:12.1: irq 16, io mem 0xfe9fd000
: hub 4-0:1.0: USB hub found
: hub 4-0:1.0: 3 ports detected
: ohci-pci 0000:00:13.0: OHCI PCI host controller
: ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
: ohci-pci 0000:00:13.0: irq 18, io mem 0xfe9fc000
: hub 5-0:1.0: USB hub found
: hub 5-0:1.0: 3 ports detected
: ohci-pci 0000:00:13.1: OHCI PCI host controller
: ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
: ohci-pci 0000:00:13.1: irq 18, io mem 0xfe9fb000
: hub 6-0:1.0: USB hub found
: hub 6-0:1.0: 3 ports detected
: ohci-pci 0000:00:14.5: OHCI PCI host controller
: ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
: ohci-pci 0000:00:14.5: irq 18, io mem 0xfe9fa000
: hub 7-0:1.0: USB hub found
: hub 7-0:1.0: 2 ports detected
: ata3: SATA link down (SStatus 0 SControl 300)
: ata4: SATA link down (SStatus 0 SControl 300)
: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
: ata1.00: ATAPI: SONY DVD RW AD-7280S, 1.60, max UDMA/100
: ata2.00: ATA-8: ST500DM002-9YN14C, CC4C, max UDMA/133
: ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
: ata2.00: configured for UDMA/133
: ata1.00: configured for UDMA/100
: scsi 0:0:0:0: CD-ROM SONY DVD RW AD-7280S 1.60 PQ: 0 ANSI: 5
: scsi 1:0:0:0: Direct-Access ATA ST500DM002-9YN14 CC4C PQ: 0 ANSI: 5
: usb 3-1: new low-speed USB device number 2 using ohci-pci
: usb 5-2: new low-speed USB device number 2 using ohci-pci
: sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
: cdrom: Uniform CD-ROM driver Revision: 3.20
: sr 0:0:0:0: Attached scsi CD-ROM sr0
: sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
: sd 1:0:0:0: [sda] 4096-byte physical blocks
: sd 1:0:0:0: [sda] Write Protect is off
: sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
: sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
: sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
: sd 1:0:0:0: [sda] Attached SCSI disk
: hidraw: raw HID events driver (C) Jiri Kosina
: usbcore: registered new interface driver usbhid
: usbhid: USB HID core driver
: input: Kensington Kensington Slimblade Trackball as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:047D:2041.0001/input/input3
: input: HID 046a:0011 as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/0003:046A:0011.0002/input/input2
: kensington 0003:047D:2041.0001: input,hidraw0: USB HID v1.10 Mouse [Kensington Kensington Slimblade Trackball] on usb-0000:00:12.0-1/input0
: hid-generic 0003:046A:0011.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:13.0-2/input0
: tsc: Refined TSC clocksource calibration: 3214.431 MHz
: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e558aca513, max_idle_ns: 440795308132 ns
: random: fast init done
: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
: clocksource: Switched to clocksource tsc
: ip_tables: (C) 2000-2006 Netfilter Core Team
Aug 04 10:19:06 archlinux systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
Aug 04 10:19:06 archlinux systemd[1]: Detected architecture x86-64.
Aug 04 10:19:06 archlinux systemd[1]: Set hostname to <archlinux>.
: random: crng init done
Aug 04 10:19:06 archlinux systemd[1]: /etc/systemd/system/pkb_server.service:7: Unknown lvalue '/* User' in section 'Service'
Aug 04 10:19:06 archlinux systemd[1]: Listening on Journal Socket (/dev/log).
Aug 04 10:19:06 archlinux systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
Aug 04 10:19:06 archlinux systemd[1]: Listening on udev Kernel Socket.
Aug 04 10:19:06 archlinux systemd[1]: Listening on udev Control Socket.
Aug 04 10:19:06 archlinux systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Aug 04 10:19:06 archlinux systemd[1]: Listening on LVM2 metadata daemon socket.
: EXT4-fs (sda2): re-mounted. Opts: data=ordered
: acpi_cpufreq: overriding BIOS provided _PSD data
: ATK0110 ATK0110:00: Overriding interface detection
: ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
: ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20170303/utaddress-247)
: ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\SMRG) (20170303/utaddress-247)
: ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB.PCI0.SBRG.ASOC.SMRG) (20170303/utaddress-247)
: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
: ACPI: Power Button [PWRB]
: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
: ACPI: Power Button [PWRF]
: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
: wmi: Mapper loaded
: sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
: sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x3c
: sp5100_tco: failed to find MMIO address, giving up.
: input: PC Speaker as /devices/platform/pcspkr/input/input6
: alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [c8:60:00:ec:30:14]
: kvm: disabled by bios
: kvm: disabled by bios
: kvm: disabled by bios
: kvm: disabled by bios
: MCE: In-kernel MCE decoding enabled.
: EDAC amd64: Node 0: DRAM ECC disabled.
: EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
: alx 0000:02:00.0 enp2s0: renamed from eth0
: [drm] radeon kernel modesetting enabled.
: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
: AMD IOMMUv2 functionality not available on this system
: CRAT table not found
: Finished initializing topology ret=0
: kfd kfd: Initialized module
: checking generic (d0000000 300000) vs hw (d0000000 10000000)
: fb: switching to radeondrmfb from VESA VGA
: Console: switching to colour dummy device 80x25
: [drm] initializing kernel modesetting (BARTS 0x1002:0x6739 0x1787:0x2304 0x00).
: ATOM BIOS: BARTS
: radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
: radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
: [drm] Detected VRAM RAM=1024M, BAR=256M
: [drm] RAM width 256bits DDR
: [TTM] Zone kernel: Available graphics memory: 2024630 kiB
: [TTM] Initializing pool allocator
: [TTM] Initializing DMA pool allocator
: [drm] radeon: 1024M of VRAM memory ready
: [drm] radeon: 1024M of GTT memory ready.
: [drm] Loading BARTS Microcode
: mousedev: PS/2 mouse device common for all mice
: snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
: snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
: snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
: snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
: snd_hda_codec_realtek hdaudioC0D0: inputs:
: snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
: snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
: snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
: input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
: input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
: input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
: input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
: input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
: [drm] Internal thermal controller with fan control
: [drm] radeon: dpm initialized
: [drm] GART: num cpu pages 262144, num gpu pages 262144
: [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
: [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
: radeon 0000:01:00.0: WB enabled
: radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff9399e364ac00
: radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff9399e364ac0c
: radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffa1a041e32118
: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
: [drm] Driver supports precise vblank timestamp query.
: radeon 0000:01:00.0: radeon: MSI limited to 32-bit
: radeon 0000:01:00.0: radeon: using MSI.
: [drm] radeon: irq initialized.
: [drm] ring test on 0 succeeded in 2 usecs
: [drm] ring test on 3 succeeded in 6 usecs
: [drm] ring test on 5 succeeded in 2 usecs
: [drm] UVD initialized successfully.
: [drm] ib test on ring 0 succeeded in 0 usecs
: [drm] ib test on ring 3 succeeded in 0 usecs
: [drm] ib test on ring 5 succeeded
: [drm] Radeon Display Connectors
: [drm] Connector 0:
: [drm] DP-1
: [drm] HPD4
: [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
: [drm] Encoders:
: [drm] DFP1: INTERNAL_UNIPHY2
: [drm] Connector 1:
: [drm] DP-2
: [drm] HPD5
: [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
: [drm] Encoders:
: [drm] DFP2: INTERNAL_UNIPHY2
: [drm] Connector 2:
: [drm] HDMI-A-1
: [drm] HPD3
: [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
: [drm] Encoders:
: [drm] DFP3: INTERNAL_UNIPHY1
: [drm] Connector 3:
: [drm] DVI-D-1
: [drm] HPD1
: [drm] DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 0x648c
: [drm] Encoders:
: [drm] DFP4: INTERNAL_UNIPHY1
: [drm] Connector 4:
: [drm] DVI-I-1
: [drm] HPD6
: [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
: [drm] Encoders:
: [drm] DFP5: INTERNAL_UNIPHY
: [drm] CRT1: INTERNAL_KLDSCP_DAC1
: [drm] fb mappable at 0xD0363000
: [drm] vram apper at 0xD0000000
: [drm] size 3145728
: [drm] fb depth is 24
: [drm] pitch is 4096
: fbcon: radeondrmfb (fb0) is primary device
: Console: switching to colour frame buffer device 128x48
: radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
: [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
: snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
: input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
: IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
: alx 0000:02:00.0 enp2s0: NIC Up: 100 Mbps Full
: IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
: radeon_dp_aux_transfer_native: 158 callbacks suppressed
: fuse init (API version 7.26)
: radeon_dp_aux_transfer_native: 158 callbacks suppressed
: radeon_dp_aux_transfer_native: 74 callbacks suppressed
: systemd-shutdow: 27 output lines suppressed due to ratelimiting
Aug 04 10:46:00 archlinux systemd-shutdown[1]: Sending SIGTERM to remaining processes...the failed dmesg log:
: Linux version 4.12.3-1-ARCH (builduser@nspawn-13499) (gcc version 7.1.1 20170630 (GCC) ) #1 SMP PREEMPT Sat Jul 22 15:32:02 UTC 2017
: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=60e3edd4-4770-4ab8-acbc-b6593db99e7e rw quiet
: x86/fpu: x87 FPU will use FXSAVE
: e820: BIOS-provided physical RAM map:
: BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
: BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
: BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
: BIOS-e820: [mem 0x0000000000100000-0x00000000cfe7ffff] usable
: BIOS-e820: [mem 0x00000000cfe80000-0x00000000cfe97fff] ACPI data
: BIOS-e820: [mem 0x00000000cfe98000-0x00000000cfebffff] ACPI NVS
: BIOS-e820: [mem 0x00000000cfec0000-0x00000000cfefffff] reserved
: BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
: BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
: NX (Execute Disable) protection: active
: SMBIOS 2.5 present.
: DMI: System manufacturer System Product Name/M5A78L-M LX3, BIOS 1201 04/19/2013
: tsc: Fast TSC calibration using PIT
: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
: e820: remove [mem 0x000a0000-0x000fffff] usable
: AGP: No AGP bridge found
: e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
: MTRR default type: uncachable
: MTRR fixed ranges enabled:
: 00000-9FFFF write-back
: A0000-EFFFF uncachable
: F0000-FFFFF write-protect
: MTRR variable ranges enabled:
: 0 base 000000000000 mask FFFF80000000 write-back
: 1 base 000080000000 mask FFFFC0000000 write-back
: 2 base 0000C0000000 mask FFFFF0000000 write-back
: 3 disabled
: 4 disabled
: 5 disabled
: 6 disabled
: 7 disabled
: TOM2: 0000000130000000 aka 4864M
: x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
: e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
: e820: last_pfn = 0xcfe80 max_arch_pfn = 0x400000000
: found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff880b800ff780]
: Scanning 1 areas for low memory corruption
: Base memory trampoline at [ffff880b80099000] 99000 size 24576
: Using GB pages for direct mapping
: BRK [0x6cd5f000, 0x6cd5ffff] PGTABLE
: BRK [0x6cd60000, 0x6cd60fff] PGTABLE
: BRK [0x6cd61000, 0x6cd61fff] PGTABLE
: BRK [0x6cd62000, 0x6cd62fff] PGTABLE
: BRK [0x6cd63000, 0x6cd63fff] PGTABLE
: RAMDISK: [mem 0x373b7000-0x379d2fff]
: ACPI: Early table checksum verification disabled
: ACPI: RSDP 0x00000000000FBA40 000024 (v02 ACPIAM)
: ACPI: XSDT 0x00000000CFE80100 000054 (v01 041913 XSDT1304 20130419 MSFT 00000097)
: ACPI: FACP 0x00000000CFE80290 0000F4 (v03 041913 FACP1304 20130419 MSFT 00000097)
: ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170303/tbfadt-658)
: ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20170303/tbfadt-603)
: ACPI: DSDT 0x00000000CFE80460 00D3E9 (v01 A2035 A2035001 00000001 INTL 20060113)
: ACPI: FACS 0x00000000CFE98000 000040
: ACPI: FACS 0x00000000CFE98000 000040
: ACPI: APIC 0x00000000CFE80390 00008C (v01 041913 APIC1304 20130419 MSFT 00000097)
: ACPI: MCFG 0x00000000CFE80420 00003C (v01 041913 OEMMCFG 20130419 MSFT 00000097)
: ACPI: OEMB 0x00000000CFE98040 000072 (v01 041913 OEMB1304 20130419 MSFT 00000097)
: ACPI: HPET 0x00000000CFE8F460 000038 (v01 041913 OEMHPET 20130419 MSFT 00000097)
: ACPI: SSDT 0x00000000CFE8F4A0 0008BC (v01 A M I POWERNOW 00000001 AMD 00000001)
: ACPI: Local APIC address 0xfee00000
: Scanning NUMA topology in Northbridge 24
: No NUMA configuration found
: Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
: NODE_DATA(0) allocated [mem 0x12fff9000-0x12fffdfff]
: Zone ranges:
: DMA [mem 0x0000000000001000-0x0000000000ffffff]
: DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
: Normal [mem 0x0000000100000000-0x000000012fffffff]
: Device empty
: Movable zone start for each node
: Early memory node ranges
: node 0: [mem 0x0000000000001000-0x000000000009efff]
: node 0: [mem 0x0000000000100000-0x00000000cfe7ffff]
: node 0: [mem 0x0000000100000000-0x000000012fffffff]
: Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff]
: On node 0 totalpages: 1048094
: DMA zone: 64 pages used for memmap
: DMA zone: 21 pages reserved
: DMA zone: 3998 pages, LIFO batch:0
: DMA32 zone: 13242 pages used for memmap
: DMA32 zone: 847488 pages, LIFO batch:31
: Normal zone: 3072 pages used for memmap
: Normal zone: 196608 pages, LIFO batch:31
: ACPI: PM-Timer IO Port: 0x808
: ACPI: Local APIC address 0xfee00000
: IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
: ACPI: IRQ0 used by override.
: ACPI: IRQ9 used by override.
: Using ACPI (MADT) for SMP configuration information
: ACPI: HPET id: 0x8300 base: 0xfed00000
: smpboot: Allowing 8 CPUs, 4 hotplug CPUs
: PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
: PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
: PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
: PM: Registered nosave memory: [mem 0xcfe80000-0xcfe97fff]
: PM: Registered nosave memory: [mem 0xcfe98000-0xcfebffff]
: PM: Registered nosave memory: [mem 0xcfec0000-0xcfefffff]
: PM: Registered nosave memory: [mem 0xcff00000-0xffdfffff]
: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
: e820: [mem 0xcff00000-0xffdfffff] available for PCI devices
: Booting paravirtualized kernel on bare hardware
: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
: percpu: Embedded 35 pages/cpu @ffff880cafc00000 s106328 r8192 d28840 u262144
: pcpu-alloc: s106328 r8192 d28840 u262144 alloc=1*2097152
: pcpu-alloc: [0] 0 1 2 3 4 5 6 7
: Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031695
: Policy zone: Normal
: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=60e3edd4-4770-4ab8-acbc-b6593db99e7e rw quiet
: PID hash table entries: 4096 (order: 3, 32768 bytes)
: AGP: Checking aperture...
: AGP: No AGP bridge found
: AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
: AGP: Your BIOS doesn't leave an aperture memory hole
: AGP: Please enable the IOMMU option in the BIOS setup
: AGP: This costs you 64MB of RAM
: AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
: PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
: Memory: 3974064K/4192376K available (6539K kernel code, 1124K rwdata, 2048K rodata, 1324K init, 912K bss, 218312K reserved, 0K cma-reserved)
: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
: ftrace: allocating 27931 entries in 110 pages
: Preemptible hierarchical RCU implementation.
: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
: NR_IRQS:8448 nr_irqs:488 16
: spurious 8259A interrupt: IRQ7.
: Console: colour dummy device 80x25
: console [tty0] enabled
: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
: hpet clockevent registered
: tsc: Fast TSC calibration using PIT
: tsc: Detected 3214.587 MHz processor
: Calibrating delay loop (skipped), value calculated using timer frequency.. 6431.05 BogoMIPS (lpj=10715290)
: pid_max: default: 32768 minimum: 301
: ACPI: Core revision 20170303
: ACPI: 2 ACPI AML tables successfully acquired and loaded
: Security Framework initialized
: Yama: becoming mindful.
: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
: CPU: Physical Processor ID: 0
: CPU: Processor Core ID: 0
: mce: CPU supports 6 MCE banks
: LVT offset 0 assigned for vector 0xf9
: Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
: Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
: Freeing SMP alternatives memory: 24K
: smpboot: Max logical packages: 2
: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
: smpboot: CPU0: AMD Phenom(tm) II X4 955 Processor (family: 0x10, model: 0x4, stepping: 0x3)
: Performance Events: AMD PMU driver.
: ... version: 0
: ... bit width: 48
: ... generic registers: 4
: ... value mask: 0000ffffffffffff
: ... max period: 00007fffffffffff
: ... fixed-purpose events: 0
: ... event mask: 000000000000000f
: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
: smp: Bringing up secondary CPUs ...
: x86: Booting SMP configuration:
: .... node #0, CPUs: #1 #2 #3
: smp: Brought up 1 node, 4 CPUs
: smpboot: Total of 4 processors activated (25726.50 BogoMIPS)
: sched_clock: Marking stable (419999958, 0)->(532098053, -112098095)
: devtmpfs: initialized
: x86/mm: Memory block size: 128MB
: PM: Registering ACPI NVS region [mem 0xcfe98000-0xcfebffff] (163840 bytes)
: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
: futex hash table entries: 2048 (order: 5, 131072 bytes)
: pinctrl core: initialized pinctrl subsystem
: RTC time: 2:46:18, date: 08/04/17
: NET: Registered protocol family 16
: cpuidle: using governor ladder
: cpuidle: using governor menu
: PCCT header not found.
: node 0 link 0: io port [1000, ffffff]
: TOM: 00000000d0000000 aka 3328M
: Fam 10h mmconf [mem 0xe0000000-0xefffffff]
: node 0 link 0: mmio [a0000, bffff]
: node 0 link 0: mmio [d0000000, dfffffff]
: node 0 link 0: mmio [e0000000, efffffff] ==> none
: node 0 link 0: mmio [f0000000, ffdfffff]
: TOM2: 0000000130000000 aka 4864M
: bus: [bus 00-1f] on node 0 link 0
: bus: 00 [io 0x0000-0xffff]
: bus: 00 [mem 0x000a0000-0x000bffff]
: bus: 00 [mem 0xd0000000-0xdfffffff]
: bus: 00 [mem 0xf0000000-0xffffffff]
: bus: 00 [mem 0x130000000-0xfcffffffff]
: ACPI: bus type PCI registered
: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
: PCI: not using MMCONFIG
: PCI: Using configuration type 1 for base access
: PCI: Using configuration type 1 for extended access
: mtrr: your CPUs had inconsistent variable MTRR settings
: mtrr: probably your BIOS does not setup all CPUs.
: mtrr: corrected configuration.
: HugeTLB registered 1 GB page size, pre-allocated 0 pages
: HugeTLB registered 2 MB page size, pre-allocated 0 pages
: ACPI: Added _OSI(Module Device)
: ACPI: Added _OSI(Processor Device)
: ACPI: Added _OSI(3.0 _SCP Extensions)
: ACPI: Added _OSI(Processor Aggregator Device)
: ACPI: Executed 3 blocks of module-level executable AML code
: ACPI: Interpreter enabled
: ACPI: (supports S0 S1 S3 S4 S5)
: ACPI: Using IOAPIC for interrupt routing
: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
: acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
: PCI host bridge to bus 0000:00
: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
: pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff window]
: pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
: pci_bus 0000:00: root bus resource [bus 00-ff]
: pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
: pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
: pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
: pci 0000:00:02.0: System wakeup disabled by ACPI
: pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
: pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
: pci 0000:00:04.0: System wakeup disabled by ACPI
: pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
: pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
: pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
: pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
: pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
: pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
: pci 0000:00:11.0: reg 0x24: [mem 0xfe9ffc00-0xfe9fffff]
: pci 0000:00:11.0: set SATA to AHCI mode
: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
: pci 0000:00:12.0: reg 0x10: [mem 0xfe9fe000-0xfe9fefff]
: pci 0000:00:12.0: System wakeup disabled by ACPI
: pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
: pci 0000:00:12.1: reg 0x10: [mem 0xfe9fd000-0xfe9fdfff]
: pci 0000:00:12.1: System wakeup disabled by ACPI
: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
: pci 0000:00:12.2: reg 0x10: [mem 0xfe9ff800-0xfe9ff8ff]
: pci 0000:00:12.2: supports D1 D2
: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
: pci 0000:00:12.2: System wakeup disabled by ACPI
: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
: pci 0000:00:13.0: reg 0x10: [mem 0xfe9fc000-0xfe9fcfff]
: pci 0000:00:13.0: System wakeup disabled by ACPI
: pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
: pci 0000:00:13.1: reg 0x10: [mem 0xfe9fb000-0xfe9fbfff]
: pci 0000:00:13.1: System wakeup disabled by ACPI
: pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
: pci 0000:00:13.2: reg 0x10: [mem 0xfe9ff400-0xfe9ff4ff]
: pci 0000:00:13.2: supports D1 D2
: pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
: pci 0000:00:13.2: System wakeup disabled by ACPI
: pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
: pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
: pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
: pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
: pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
: pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
: pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
: pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
: pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
: pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
: pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
: pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
: pci 0000:00:14.2: reg 0x10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
: pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
: pci 0000:00:14.2: System wakeup disabled by ACPI
: pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
: pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
: pci 0000:00:14.4: System wakeup disabled by ACPI
: pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
: pci 0000:00:14.5: reg 0x10: [mem 0xfe9fa000-0xfe9fafff]
: pci 0000:00:14.5: System wakeup disabled by ACPI
: pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
: pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
: pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
: pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
: pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
: pci 0000:01:00.0: [1002:6739] type 00 class 0x030000
: pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
: pci 0000:01:00.0: reg 0x18: [mem 0xfeae0000-0xfeafffff 64bit]
: pci 0000:01:00.0: reg 0x20: [io 0xd000-0xd0ff]
: pci 0000:01:00.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
: pci 0000:01:00.0: supports D1 D2
: pci 0000:01:00.1: [1002:aa88] type 00 class 0x040300
: pci 0000:01:00.1: reg 0x10: [mem 0xfeabc000-0xfeabffff 64bit]
: pci 0000:01:00.1: supports D1 D2
: pci 0000:00:02.0: PCI bridge to [bus 01]
: pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
: pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
: pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
: pci 0000:02:00.0: [1969:1091] type 00 class 0x020000
: pci 0000:02:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
: pci 0000:02:00.0: reg 0x18: [io 0xec00-0xec7f]
: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
: pci 0000:02:00.0: System wakeup disabled by ACPI
: pci 0000:00:04.0: PCI bridge to [bus 02]
: pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
: pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff]
: pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
: pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
: pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
: pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
: pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
: pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff window] (subtractive decode)
: pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
: ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 12 14 15)
: ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
: ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
: ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
: ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
: ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
: ACPI: PCI Interrupt Link [LNKG] (IRQs *11)
: ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
: ACPI: Enabled 1 GPEs in block 00 to 1F
: pci 0000:01:00.0: vgaarb: setting as boot VGA device
: pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
: pci 0000:01:00.0: vgaarb: bridge control possible
: vgaarb: loaded
: EDAC MC: Ver: 3.0.0
: PCI: Using ACPI for IRQ routing
: PCI: pci_cache_line_size set to 64 bytes
: e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
: e820: reserve RAM buffer [mem 0xcfe80000-0xcfffffff]
: NetLabel: Initializing
: NetLabel: domain hash size = 128
: NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
: NetLabel: unlabeled traffic allowed by default
: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
: hpet0: 4 comparators, 32-bit 14.318180 MHz counter
: clocksource: Switched to clocksource hpet
: VFS: Disk quotas dquot_6.6.0
: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
: pnp: PnP ACPI init
: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
: pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
: pnp 00:02: [dma 0 disabled]
: pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
: system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
: system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
: system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
: system 00:04: [io 0x04d0-0x04d1] has been reserved
: system 00:04: [io 0x040b] has been reserved
: system 00:04: [io 0x04d6] has been reserved
: system 00:04: [io 0x0c00-0x0c01] has been reserved
: system 00:04: [io 0x0c14] has been reserved
: system 00:04: [io 0x0c50-0x0c51] has been reserved
: system 00:04: [io 0x0c52] has been reserved
: system 00:04: [io 0x0c6c] has been reserved
: system 00:04: [io 0x0c6f] has been reserved
: system 00:04: [io 0x0cd0-0x0cd1] has been reserved
: system 00:04: [io 0x0cd2-0x0cd3] has been reserved
: system 00:04: [io 0x0cd4-0x0cd5] has been reserved
: system 00:04: [io 0x0cd6-0x0cd7] has been reserved
: system 00:04: [io 0x0cd8-0x0cdf] has been reserved
: system 00:04: [io 0x0b00-0x0b3f] has been reserved
: system 00:04: [io 0x0800-0x089f] has been reserved
: system 00:04: [io 0x0b00-0x0b0f] has been reserved
: system 00:04: [io 0x0b20-0x0b3f] has been reserved
: system 00:04: [io 0x0900-0x090f] has been reserved
: system 00:04: [io 0x0910-0x091f] has been reserved
: system 00:04: [io 0xfe00-0xfefe] has been reserved
: system 00:04: [mem 0xcff00000-0xcfffffff] has been reserved
: system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved
: system 00:04: [mem 0xfec10000-0xfec1001f] has been reserved
: system 00:04: [mem 0xfed40000-0xfed44fff] has been reserved
: system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
: system 00:05: [io 0x0230-0x023f] has been reserved
: system 00:05: [io 0x0290-0x029f] has been reserved
: system 00:05: [io 0x0300-0x030f] has been reserved
: system 00:05: [io 0x0a30-0x0a3f] has been reserved
: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
: system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
: system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
: system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
: system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
: system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
: system 00:07: [mem 0x00100000-0xcfefffff] could not be reserved
: system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved
: system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
: pnp: PnP ACPI: found 8 devices
: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
: pci 0000:00:02.0: PCI bridge to [bus 01]
: pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
: pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
: pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
: pci 0000:00:04.0: PCI bridge to [bus 02]
: pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
: pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff]
: pci 0000:00:14.4: PCI bridge to [bus 03]
: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
: pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
: pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff window]
: pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
: pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
: pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
: pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
: pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
: pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
: pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
: pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
: pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
: pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
: pci_bus 0000:03: resource 8 [mem 0xcff00000-0xdfffffff window]
: pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff window]
: NET: Registered protocol family 2
: TCP established hash table entries: 32768 (order: 6, 262144 bytes)
: TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
: TCP: Hash tables configured (established 32768 bind 32768)
: UDP hash table entries: 2048 (order: 4, 65536 bytes)
: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
: NET: Registered protocol family 1
: pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
: pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
: PCI: CLS 64 bytes, default 64
: Unpacking initramfs...
: Freeing initrd memory: 6256K
: PCI-DMA: Disabling AGP.
: PCI-DMA: aperture base @ c4000000 size 65536 KB
: PCI-DMA: using GART IOMMU.
: PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
: LVT offset 1 assigned for vector 0x400
: IBS: LVT offset 1 assigned
: perf: AMD IBS detected (0x0000001f)
: Scanning for low memory corruption every 60 seconds
: Initialise system trusted keyrings
: Key type blacklist registered
: workingset: timestamp_bits=40 max_order=20 bucket_order=0
: zbud: loaded
: Key type asymmetric registered
: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
: io scheduler noop registered
: io scheduler deadline registered
: io scheduler cfq registered (default)
: io scheduler mq-deadline registered
: io scheduler kyber registered
: io scheduler bfq registered
: vesafb: mode is 1024x768x32, linelength=4096, pages=0
: vesafb: scrolling: redraw
: vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
: vesafb: framebuffer at 0xd0000000, mapped to 0xffffa0f8c0c00000, using 3072k, total 3072k
: Console: switching to colour frame buffer device 128x48
: fb0: VESA VGA frame buffer device
: GHES: HEST is not enabled!
: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
: 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
: Linux agpgart interface v0.103
: rtc_cmos 00:01: RTC can wake from S4
: rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
: rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
: ledtrig-cpu: registered to indicate activity on CPUs
: vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
: NET: Registered protocol family 10
: Segment Routing with IPv6
: NET: Registered protocol family 17
: RAS: Correctable Errors collector initialized.
: microcode: CPU0: patch_level=0x010000c8
: microcode: CPU1: patch_level=0x010000c8
: microcode: CPU2: patch_level=0x010000c8
: microcode: CPU3: patch_level=0x010000c8
: microcode: Microcode Update Driver: v2.2.
: registered taskstats version 1
: Loading compiled-in X.509 certificates
: zswap: loaded using pool lzo/zbud
: Magic number: 13:755:762
: rtc_cmos 00:01: setting system clock to 2017-08-04 02:46:19 UTC (1501814779)
: PM: Hibernation image not present or could not be loaded.
: Freeing unused kernel memory: 1324K
: Write protecting the kernel read-only data: 10240k
: Freeing unused kernel memory: 1640K
: i8042: PNP: No PS/2 controller found.
: i8042: Probing ports directly.
: serio: i8042 KBD port at 0x60,0x64 irq 1
: serio: i8042 AUX port at 0x60,0x64 irq 12
: SCSI subsystem initialized
: ACPI: bus type USB registered
: usbcore: registered new interface driver usbfs
: usbcore: registered new interface driver hub
: usbcore: registered new device driver usb
: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
: Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
: ehci-pci: EHCI PCI platform driver
: ehci-pci 0000:00:12.2: EHCI Host Controller
: ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
: ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
: ehci-pci 0000:00:12.2: debug port 1
: ehci-pci 0000:00:12.2: irq 17, io mem 0xfe9ff800
: libata version 3.00 loaded.
: ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
: hub 1-0:1.0: USB hub found
: hub 1-0:1.0: 6 ports detected
: ehci-pci 0000:00:13.2: EHCI Host Controller
: ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
: ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
: ehci-pci 0000:00:13.2: debug port 1
: ehci-pci 0000:00:13.2: irq 19, io mem 0xfe9ff400
: ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
: hub 2-0:1.0: USB hub found
: hub 2-0:1.0: 6 ports detected
: ohci-pci: OHCI PCI platform driver
: scsi host0: pata_atiixp
: scsi host1: pata_atiixp
: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
: ahci 0000:00:11.0: version 3.0
: ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
: ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
: scsi host2: ahci
: scsi host3: ahci
: scsi host4: ahci
: scsi host5: ahci
: ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 22
: ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 22
: ata5: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 22
: ata6: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 22
: ohci-pci 0000:00:12.0: OHCI PCI host controller
: ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
: ohci-pci 0000:00:12.0: irq 16, io mem 0xfe9fe000
: hub 3-0:1.0: USB hub found
: hub 3-0:1.0: 3 ports detected
: ohci-pci 0000:00:12.1: OHCI PCI host controller
: ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
: ohci-pci 0000:00:12.1: irq 16, io mem 0xfe9fd000
: hub 4-0:1.0: USB hub found
: hub 4-0:1.0: 3 ports detected
: ohci-pci 0000:00:13.0: OHCI PCI host controller
: ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
: ohci-pci 0000:00:13.0: irq 18, io mem 0xfe9fc000
: hub 5-0:1.0: USB hub found
: hub 5-0:1.0: 3 ports detected
: ohci-pci 0000:00:13.1: OHCI PCI host controller
: ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
: ohci-pci 0000:00:13.1: irq 18, io mem 0xfe9fb000
: hub 6-0:1.0: USB hub found
: hub 6-0:1.0: 3 ports detected
: ohci-pci 0000:00:14.5: OHCI PCI host controller
: ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
: ohci-pci 0000:00:14.5: irq 18, io mem 0xfe9fa000
: hub 7-0:1.0: USB hub found
: hub 7-0:1.0: 2 ports detected
: ata5: SATA link down (SStatus 0 SControl 300)
: ata6: SATA link down (SStatus 0 SControl 300)
: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
: ata4.00: ATA-8: ST500DM002-9YN14C, CC4C, max UDMA/133
: ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
: ata4.00: configured for UDMA/133
: ata3.00: ATAPI: SONY DVD RW AD-7280S, 1.60, max UDMA/100
: ata3.00: configured for UDMA/100
: scsi 2:0:0:0: CD-ROM SONY DVD RW AD-7280S 1.60 PQ: 0 ANSI: 5
: scsi 3:0:0:0: Direct-Access ATA ST500DM002-9YN14 CC4C PQ: 0 ANSI: 5
: usb 3-1: new low-speed USB device number 2 using ohci-pci
: usb 5-2: new low-speed USB device number 2 using ohci-pci
: sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
: sd 3:0:0:0: [sda] 4096-byte physical blocks
: sd 3:0:0:0: [sda] Write Protect is off
: sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
: sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
: sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
: cdrom: Uniform CD-ROM driver Revision: 3.20
: sr 2:0:0:0: Attached scsi CD-ROM sr0
: sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
: sd 3:0:0:0: [sda] Attached SCSI disk
: hidraw: raw HID events driver (C) Jiri Kosina
: usbcore: registered new interface driver usbhid
: usbhid: USB HID core driver
: input: Kensington Kensington Slimblade Trackball as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:047D:2041.0001/input/input2
: kensington 0003:047D:2041.0001: input,hidraw0: USB HID v1.10 Mouse [Kensington Kensington Slimblade Trackball] on usb-0000:00:12.0-1/input0
: input: HID 046a:0011 as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/0003:046A:0011.0002/input/input3
: hid-generic 0003:046A:0011.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:13.0-2/input0
: tsc: Refined TSC clocksource calibration: 3214.431 MHz
: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e558aca513, max_idle_ns: 440795308132 ns
: random: fast init done
: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
: clocksource: Switched to clocksource tsc
: ip_tables: (C) 2000-2006 Netfilter Core Team
Aug 04 10:46:23 archlinux systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
Aug 04 10:46:23 archlinux systemd[1]: Detected architecture x86-64.
Aug 04 10:46:23 archlinux systemd[1]: Set hostname to <archlinux>.
: random: crng init done
Aug 04 10:46:23 archlinux systemd[1]: /etc/systemd/system/pkb_server.service:7: Unknown lvalue '/* User' in section 'Service'
Aug 04 10:46:23 archlinux systemd[1]: Listening on Device-mapper event daemon FIFOs.
Aug 04 10:46:23 archlinux systemd[1]: Created slice User and Session Slice.
Aug 04 10:46:23 archlinux systemd[1]: Listening on Process Core Dump Socket.
Aug 04 10:46:23 archlinux systemd[1]: Reached target Login Prompts.
Aug 04 10:46:23 archlinux systemd[1]: Listening on udev Kernel Socket.
Aug 04 10:46:23 archlinux systemd[1]: Listening on LVM2 metadata daemon socket.
: EXT4-fs (sda2): re-mounted. Opts: data=orderedyou see, that the failed log exactly stopped at the middle of the successfully boot. to be more convinient to read , I paste the differ part here :
: acpi_cpufreq: overriding BIOS provided _PSD data
: ATK0110 ATK0110:00: Overriding interface detection
: ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
: ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20170303/utaddress-247)
: ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\SMRG) (20170303/utaddress-247)
: ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB.PCI0.SBRG.ASOC.SMRG) (20170303/utaddress-247)
: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
: ACPI: Power Button [PWRB]
: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
: ACPI: Power Button [PWRF]
: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
: wmi: Mapper loaded
: sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
: sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x3c
: sp5100_tco: failed to find MMIO address, giving up.
: input: PC Speaker as /devices/platform/pcspkr/input/input6
: alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [c8:60:00:ec:30:14]
: kvm: disabled by bios
: kvm: disabled by bios
: kvm: disabled by bios
: kvm: disabled by bios
: MCE: In-kernel MCE decoding enabled.
: EDAC amd64: Node 0: DRAM ECC disabled.
: EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
: alx 0000:02:00.0 enp2s0: renamed from eth0
: [drm] radeon kernel modesetting enabled.
: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
: AMD IOMMUv2 functionality not available on this system
: CRAT table not found
: Finished initializing topology ret=0
: kfd kfd: Initialized module
: checking generic (d0000000 300000) vs hw (d0000000 10000000)
: fb: switching to radeondrmfb from VESA VGA
: Console: switching to colour dummy device 80x25
: [drm] initializing kernel modesetting (BARTS 0x1002:0x6739 0x1787:0x2304 0x00).
: ATOM BIOS: BARTS
: radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
: radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
: [drm] Detected VRAM RAM=1024M, BAR=256M
: [drm] RAM width 256bits DDR
: [TTM] Zone kernel: Available graphics memory: 2024630 kiB
: [TTM] Initializing pool allocator
: [TTM] Initializing DMA pool allocator
: [drm] radeon: 1024M of VRAM memory ready
: [drm] radeon: 1024M of GTT memory ready.
: [drm] Loading BARTS Microcode
: mousedev: PS/2 mouse device common for all mice
: snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
: snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
: snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
: snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
: snd_hda_codec_realtek hdaudioC0D0: inputs:
: snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
: snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
: snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
: input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
: input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
: input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
: input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
: input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
: [drm] Internal thermal controller with fan control
: [drm] radeon: dpm initialized
: [drm] GART: num cpu pages 262144, num gpu pages 262144
: [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
: [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
: radeon 0000:01:00.0: WB enabled
: radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff9399e364ac00
: radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff9399e364ac0c
: radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffa1a041e32118
: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
: [drm] Driver supports precise vblank timestamp query.
: radeon 0000:01:00.0: radeon: MSI limited to 32-bit
: radeon 0000:01:00.0: radeon: using MSI.
: [drm] radeon: irq initialized.
: [drm] ring test on 0 succeeded in 2 usecs
: [drm] ring test on 3 succeeded in 6 usecs
: [drm] ring test on 5 succeeded in 2 usecs
: [drm] UVD initialized successfully.
: [drm] ib test on ring 0 succeeded in 0 usecs
: [drm] ib test on ring 3 succeeded in 0 usecs
: [drm] ib test on ring 5 succeeded
: [drm] Radeon Display Connectors
: [drm] Connector 0:
: [drm] DP-1
: [drm] HPD4
: [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
: [drm] Encoders:
: [drm] DFP1: INTERNAL_UNIPHY2
: [drm] Connector 1:
: [drm] DP-2
: [drm] HPD5
: [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
: [drm] Encoders:
: [drm] DFP2: INTERNAL_UNIPHY2
: [drm] Connector 2:
: [drm] HDMI-A-1
: [drm] HPD3
: [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
: [drm] Encoders:
: [drm] DFP3: INTERNAL_UNIPHY1
: [drm] Connector 3:
: [drm] DVI-D-1
: [drm] HPD1
: [drm] DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 0x648c
: [drm] Encoders:
: [drm] DFP4: INTERNAL_UNIPHY1
: [drm] Connector 4:
: [drm] DVI-I-1
: [drm] HPD6
: [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
: [drm] Encoders:
: [drm] DFP5: INTERNAL_UNIPHY
: [drm] CRT1: INTERNAL_KLDSCP_DAC1
: [drm] fb mappable at 0xD0363000
: [drm] vram apper at 0xD0000000
: [drm] size 3145728
: [drm] fb depth is 24
: [drm] pitch is 4096
: fbcon: radeondrmfb (fb0) is primary device
: Console: switching to colour frame buffer device 128x48
: radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
: [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
: snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
: input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
: IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
: alx 0000:02:00.0 enp2s0: NIC Up: 100 Mbps Full
: IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
: radeon_dp_aux_transfer_native: 158 callbacks suppressed
: fuse init (API version 7.26)
: radeon_dp_aux_transfer_native: 158 callbacks suppressed
: radeon_dp_aux_transfer_native: 74 callbacks suppressed
: systemd-shutdow: 27 output lines suppressed due to ratelimiting
Aug 04 10:46:00 archlinux systemd-shutdown[1]: Sending SIGTERM to remaining processes...I'm not able to interpret this log , but it stops at doing something with bios and cpu frequency , can we say that there is something wrong with BIOS ， cpu fan, or the machine power ? currently the cpu fan has speed shown in BIOS, seems the fan is ok.
by the way , a friend several days before this problem happens has opened my machine box , detached the harddisk later attached it back again, he's not professional ( I'm not neither ), because there is no problem RIGHT AFTER his work , I never thought that could be the cause, but this problem happens randomly , maybe by coincidence it works for just those days, could it be possible he mis-connected some buses ?
Last edited by socialloser1 (2017-08-04 04:04:41)
Offline
#10 2017-08-04 12:37:21
- socialloser1
- Member
- Registered: 2017-04-04
- Posts: 32
Re: [solved] "no signal" after boot, disbling KMS temporarily works
a major breakthrough !
today when the boot "fails", I decided to wait for a while to see if dmesg can collect more messages, after about 1 minute, suddenly there are a lot messages spannig on the screen , then comes out the lxdm login screen ( I enabled lxdm again )
after checking with the error messages and search on net , seems the problem is caused by kernel dynamic power management of radeon graphic card.
I'm still working on it , hope I can solve it myself...
Offline
#11 2017-08-04 13:30:13
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,877
Re: [solved] "no signal" after boot, disbling KMS temporarily works
"modinfo radeon", try "radeon.dpm=0 radeon.aspm=0 radeon.runpm=0" as kernel parameters
Offline
#12 2017-08-05 02:32:19
- socialloser1
- Member
- Registered: 2017-04-04
- Posts: 32
Re: [solved] "no signal" after boot, disbling KMS temporarily works
"radeon.dpm=0" solved the problem.
Thank you seth , and thank WorMzy for remind me to tell critical informations.
Last edited by socialloser1 (2017-08-05 04:14:35)
Offline
#13 2017-08-05 06:21:38
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,877
Re: [solved] "no signal" after boot, disbling KMS temporarily works
Cool 
Is the stall gone as well or does the cold boot lag for other reasons and dpm just kicked in, turning off the screen?
In any case, I suggest to adjust the title of your first post to better reflect the actual issue and tag it as solved so that people with similar issues will find it (we created some diversion worrying about the output connection)
Offline
#14 2017-08-07 14:29:47
- socialloser1
- Member
- Registered: 2017-04-04
- Posts: 32
Re: [solved] "no signal" after boot, disbling KMS temporarily works
seth wrote:
Cool
Is the stall gone as well or does the cold boot lag for other reasons and dpm just kicked in, turning off the screen?In any case, I suggest to adjust the title of your first post to better reflect the actual issue and tag it as solved so that people with similar issues will find it (we created some diversion worrying about the output connection)
stall is gone, everything works fine. no more lags.
the full dmesg log when the lagged boot occurs is as follows :
: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=60e3edd4-4770-4ab8-acbc-b6593db99e7e rw quiet
: x86/fpu: x87 FPU will use FXSAVE
: e820: BIOS-provided physical RAM map:
: BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
: BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
: BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
: BIOS-e820: [mem 0x0000000000100000-0x00000000cfe7ffff] usable
: BIOS-e820: [mem 0x00000000cfe80000-0x00000000cfe97fff] ACPI data
: BIOS-e820: [mem 0x00000000cfe98000-0x00000000cfebffff] ACPI NVS
: BIOS-e820: [mem 0x00000000cfec0000-0x00000000cfefffff] reserved
: BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
: BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
: NX (Execute Disable) protection: active
: SMBIOS 2.5 present.
: DMI: System manufacturer System Product Name/M5A78L-M LX3, BIOS 1201 04/19/2013
: tsc: Fast TSC calibration using PIT
: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
: e820: remove [mem 0x000a0000-0x000fffff] usable
: AGP: No AGP bridge found
: e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
: MTRR default type: uncachable
: MTRR fixed ranges enabled:
: 00000-9FFFF write-back
: A0000-EFFFF uncachable
: F0000-FFFFF write-protect
: MTRR variable ranges enabled:
: 0 base 000000000000 mask FFFF80000000 write-back
: 1 base 000080000000 mask FFFFC0000000 write-back
: 2 base 0000C0000000 mask FFFFF0000000 write-back
: 3 disabled
: 4 disabled
: 5 disabled
: 6 disabled
: 7 disabled
: TOM2: 0000000130000000 aka 4864M
: x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
: e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
: e820: last_pfn = 0xcfe80 max_arch_pfn = 0x400000000
: found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8c96000ff780]
: Scanning 1 areas for low memory corruption
: Base memory trampoline at [ffff8c9600099000] 99000 size 24576
: Using GB pages for direct mapping
: BRK [0x1bd5f000, 0x1bd5ffff] PGTABLE
: BRK [0x1bd60000, 0x1bd60fff] PGTABLE
: BRK [0x1bd61000, 0x1bd61fff] PGTABLE
: BRK [0x1bd62000, 0x1bd62fff] PGTABLE
: BRK [0x1bd63000, 0x1bd63fff] PGTABLE
: RAMDISK: [mem 0x37393000-0x379c0fff]
: ACPI: Early table checksum verification disabled
: ACPI: RSDP 0x00000000000FBA40 000024 (v02 ACPIAM)
: ACPI: XSDT 0x00000000CFE80100 000054 (v01 041913 XSDT1304 20130419 MSFT 00000097)
: ACPI: FACP 0x00000000CFE80290 0000F4 (v03 041913 FACP1304 20130419 MSFT 00000097)
: ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170303/tbfadt-658)
: ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20170303/tbfadt-603)
: ACPI: DSDT 0x00000000CFE80460 00D3E9 (v01 A2035 A2035001 00000001 INTL 20060113)
: ACPI: FACS 0x00000000CFE98000 000040
: ACPI: FACS 0x00000000CFE98000 000040
: ACPI: APIC 0x00000000CFE80390 00008C (v01 041913 APIC1304 20130419 MSFT 00000097)
: ACPI: MCFG 0x00000000CFE80420 00003C (v01 041913 OEMMCFG 20130419 MSFT 00000097)
: ACPI: OEMB 0x00000000CFE98040 000072 (v01 041913 OEMB1304 20130419 MSFT 00000097)
: ACPI: HPET 0x00000000CFE8F460 000038 (v01 041913 OEMHPET 20130419 MSFT 00000097)
: ACPI: SSDT 0x00000000CFE8F4A0 0008BC (v01 A M I POWERNOW 00000001 AMD 00000001)
: ACPI: Local APIC address 0xfee00000
: Scanning NUMA topology in Northbridge 24
: No NUMA configuration found
: Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
: NODE_DATA(0) allocated [mem 0x12fff9000-0x12fffdfff]
: Zone ranges:
: DMA [mem 0x0000000000001000-0x0000000000ffffff]
: DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
: Normal [mem 0x0000000100000000-0x000000012fffffff]
: Device empty
: Movable zone start for each node
: Early memory node ranges
: node 0: [mem 0x0000000000001000-0x000000000009efff]
: node 0: [mem 0x0000000000100000-0x00000000cfe7ffff]
: node 0: [mem 0x0000000100000000-0x000000012fffffff]
: Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff]
: On node 0 totalpages: 1048094
: DMA zone: 64 pages used for memmap
: DMA zone: 21 pages reserved
: DMA zone: 3998 pages, LIFO batch:0
: DMA32 zone: 13242 pages used for memmap
: DMA32 zone: 847488 pages, LIFO batch:31
: Normal zone: 3072 pages used for memmap
: Normal zone: 196608 pages, LIFO batch:31
: ACPI: PM-Timer IO Port: 0x808
: ACPI: Local APIC address 0xfee00000
: IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
: ACPI: IRQ0 used by override.
: ACPI: IRQ9 used by override.
: Using ACPI (MADT) for SMP configuration information
: ACPI: HPET id: 0x8300 base: 0xfed00000
: smpboot: Allowing 8 CPUs, 4 hotplug CPUs
: PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
: PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
: PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
: PM: Registered nosave memory: [mem 0xcfe80000-0xcfe97fff]
: PM: Registered nosave memory: [mem 0xcfe98000-0xcfebffff]
: PM: Registered nosave memory: [mem 0xcfec0000-0xcfefffff]
: PM: Registered nosave memory: [mem 0xcff00000-0xffdfffff]
: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
: e820: [mem 0xcff00000-0xffdfffff] available for PCI devices
: Booting paravirtualized kernel on bare hardware
: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
: percpu: Embedded 35 pages/cpu @ffff8c972fc00000 s106328 r8192 d28840 u262144
: pcpu-alloc: s106328 r8192 d28840 u262144 alloc=1*2097152
: pcpu-alloc: [0] 0 1 2 3 4 5 6 7
: Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031695
: Policy zone: Normal
: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=60e3edd4-4770-4ab8-acbc-b6593db99e7e rw quiet
: PID hash table entries: 4096 (order: 3, 32768 bytes)
: AGP: Checking aperture...
: AGP: No AGP bridge found
: AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
: AGP: Your BIOS doesn't leave an aperture memory hole
: AGP: Please enable the IOMMU option in the BIOS setup
: AGP: This costs you 64MB of RAM
: AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
: PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
: Memory: 3973992K/4192376K available (6539K kernel code, 1124K rwdata, 2048K rodata, 1324K init, 912K bss, 218384K reserved, 0K cma-reserved)
: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
: ftrace: allocating 27931 entries in 110 pages
: Preemptible hierarchical RCU implementation.
: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
: NR_IRQS:8448 nr_irqs:488 16
: spurious 8259A interrupt: IRQ7.
: Console: colour dummy device 80x25
: console [tty0] enabled
: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
: hpet clockevent registered
: tsc: Fast TSC calibration using PIT
: tsc: Detected 3214.474 MHz processor
: Calibrating delay loop (skipped), value calculated using timer frequency.. 6431.82 BogoMIPS (lpj=10714913)
: pid_max: default: 32768 minimum: 301
: ACPI: Core revision 20170303
: ACPI: 2 ACPI AML tables successfully acquired and loaded
: Security Framework initialized
: Yama: becoming mindful.
: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
: CPU: Physical Processor ID: 0
: CPU: Processor Core ID: 0
: mce: CPU supports 6 MCE banks
: LVT offset 0 assigned for vector 0xf9
: Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
: Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
: Freeing SMP alternatives memory: 24K
: smpboot: Max logical packages: 2
: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
: smpboot: CPU0: AMD Phenom(tm) II X4 955 Processor (family: 0x10, model: 0x4, stepping: 0x3)
: Performance Events: AMD PMU driver.
: ... version: 0
: ... bit width: 48
: ... generic registers: 4
: ... value mask: 0000ffffffffffff
: ... max period: 00007fffffffffff
: ... fixed-purpose events: 0
: ... event mask: 000000000000000f
: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
: smp: Bringing up secondary CPUs ...
: x86: Booting SMP configuration:
: .... node #0, CPUs: #1 #2 #3
: smp: Brought up 1 node, 4 CPUs
: smpboot: Total of 4 processors activated (25726.20 BogoMIPS)
: sched_clock: Marking stable (419999958, 0)->(528545514, -108545556)
: devtmpfs: initialized
: x86/mm: Memory block size: 128MB
: PM: Registering ACPI NVS region [mem 0xcfe98000-0xcfebffff] (163840 bytes)
: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
: futex hash table entries: 2048 (order: 5, 131072 bytes)
: pinctrl core: initialized pinctrl subsystem
: RTC time: 12:40:45, date: 08/04/17
: NET: Registered protocol family 16
: cpuidle: using governor ladder
: cpuidle: using governor menu
: PCCT header not found.
: node 0 link 0: io port [1000, ffffff]
: TOM: 00000000d0000000 aka 3328M
: Fam 10h mmconf [mem 0xe0000000-0xefffffff]
: node 0 link 0: mmio [a0000, bffff]
: node 0 link 0: mmio [d0000000, dfffffff]
: node 0 link 0: mmio [e0000000, efffffff] ==> none
: node 0 link 0: mmio [f0000000, ffdfffff]
: TOM2: 0000000130000000 aka 4864M
: bus: [bus 00-1f] on node 0 link 0
: bus: 00 [io 0x0000-0xffff]
: bus: 00 [mem 0x000a0000-0x000bffff]
: bus: 00 [mem 0xd0000000-0xdfffffff]
: bus: 00 [mem 0xf0000000-0xffffffff]
: bus: 00 [mem 0x130000000-0xfcffffffff]
: ACPI: bus type PCI registered
: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
: PCI: not using MMCONFIG
: PCI: Using configuration type 1 for base access
: PCI: Using configuration type 1 for extended access
: mtrr: your CPUs had inconsistent variable MTRR settings
: mtrr: probably your BIOS does not setup all CPUs.
: mtrr: corrected configuration.
: HugeTLB registered 1 GB page size, pre-allocated 0 pages
: HugeTLB registered 2 MB page size, pre-allocated 0 pages
: ACPI: Added _OSI(Module Device)
: ACPI: Added _OSI(Processor Device)
: ACPI: Added _OSI(3.0 _SCP Extensions)
: ACPI: Added _OSI(Processor Aggregator Device)
: ACPI: Executed 3 blocks of module-level executable AML code
: ACPI: Interpreter enabled
: ACPI: (supports S0 S1 S3 S4 S5)
: ACPI: Using IOAPIC for interrupt routing
: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
: acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
: PCI host bridge to bus 0000:00
: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
: pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff window]
: pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
: pci_bus 0000:00: root bus resource [bus 00-ff]
: pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
: pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
: pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
: pci 0000:00:02.0: System wakeup disabled by ACPI
: pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
: pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
: pci 0000:00:04.0: System wakeup disabled by ACPI
: pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
: pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
: pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
: pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
: pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
: pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
: pci 0000:00:11.0: reg 0x24: [mem 0xfe9ffc00-0xfe9fffff]
: pci 0000:00:11.0: set SATA to AHCI mode
: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
: pci 0000:00:12.0: reg 0x10: [mem 0xfe9fe000-0xfe9fefff]
: pci 0000:00:12.0: System wakeup disabled by ACPI
: pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
: pci 0000:00:12.1: reg 0x10: [mem 0xfe9fd000-0xfe9fdfff]
: pci 0000:00:12.1: System wakeup disabled by ACPI
: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
: pci 0000:00:12.2: reg 0x10: [mem 0xfe9ff800-0xfe9ff8ff]
: pci 0000:00:12.2: supports D1 D2
: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
: pci 0000:00:12.2: System wakeup disabled by ACPI
: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
: pci 0000:00:13.0: reg 0x10: [mem 0xfe9fc000-0xfe9fcfff]
: pci 0000:00:13.0: System wakeup disabled by ACPI
: pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
: pci 0000:00:13.1: reg 0x10: [mem 0xfe9fb000-0xfe9fbfff]
: pci 0000:00:13.1: System wakeup disabled by ACPI
: pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
: pci 0000:00:13.2: reg 0x10: [mem 0xfe9ff400-0xfe9ff4ff]
: pci 0000:00:13.2: supports D1 D2
: pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
: pci 0000:00:13.2: System wakeup disabled by ACPI
: pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
: pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
: pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
: pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
: pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
: pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
: pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
: pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
: pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
: pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
: pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
: pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
: pci 0000:00:14.2: reg 0x10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
: pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
: pci 0000:00:14.2: System wakeup disabled by ACPI
: pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
: pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
: pci 0000:00:14.4: System wakeup disabled by ACPI
: pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
: pci 0000:00:14.5: reg 0x10: [mem 0xfe9fa000-0xfe9fafff]
: pci 0000:00:14.5: System wakeup disabled by ACPI
: pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
: pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
: pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
: pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
: pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
: pci 0000:01:00.0: [1002:6739] type 00 class 0x030000
: pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
: pci 0000:01:00.0: reg 0x18: [mem 0xfeae0000-0xfeafffff 64bit]
: pci 0000:01:00.0: reg 0x20: [io 0xd000-0xd0ff]
: pci 0000:01:00.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
: pci 0000:01:00.0: supports D1 D2
: pci 0000:01:00.1: [1002:aa88] type 00 class 0x040300
: pci 0000:01:00.1: reg 0x10: [mem 0xfeabc000-0xfeabffff 64bit]
: pci 0000:01:00.1: supports D1 D2
: pci 0000:00:02.0: PCI bridge to [bus 01]
: pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
: pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
: pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
: pci 0000:02:00.0: [1969:1091] type 00 class 0x020000
: pci 0000:02:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
: pci 0000:02:00.0: reg 0x18: [io 0xec00-0xec7f]
: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
: pci 0000:02:00.0: System wakeup disabled by ACPI
: pci 0000:00:04.0: PCI bridge to [bus 02]
: pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
: pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff]
: pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
: pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
: pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
: pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
: pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
: pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff window] (subtractive decode)
: pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
: ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 12 14 15)
: ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
: ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
: ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
: ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
: ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
: ACPI: PCI Interrupt Link [LNKG] (IRQs *11)
: ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
: ACPI: Enabled 1 GPEs in block 00 to 1F
: pci 0000:01:00.0: vgaarb: setting as boot VGA device
: pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
: pci 0000:01:00.0: vgaarb: bridge control possible
: vgaarb: loaded
: EDAC MC: Ver: 3.0.0
: PCI: Using ACPI for IRQ routing
: PCI: pci_cache_line_size set to 64 bytes
: e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
: e820: reserve RAM buffer [mem 0xcfe80000-0xcfffffff]
: NetLabel: Initializing
: NetLabel: domain hash size = 128
: NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
: NetLabel: unlabeled traffic allowed by default
: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
: hpet0: 4 comparators, 32-bit 14.318180 MHz counter
: clocksource: Switched to clocksource hpet
: VFS: Disk quotas dquot_6.6.0
: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
: pnp: PnP ACPI init
: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
: pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
: pnp 00:02: [dma 0 disabled]
: pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
: system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
: system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
: system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
: system 00:04: [io 0x04d0-0x04d1] has been reserved
: system 00:04: [io 0x040b] has been reserved
: system 00:04: [io 0x04d6] has been reserved
: system 00:04: [io 0x0c00-0x0c01] has been reserved
: system 00:04: [io 0x0c14] has been reserved
: system 00:04: [io 0x0c50-0x0c51] has been reserved
: system 00:04: [io 0x0c52] has been reserved
: system 00:04: [io 0x0c6c] has been reserved
: system 00:04: [io 0x0c6f] has been reserved
: system 00:04: [io 0x0cd0-0x0cd1] has been reserved
: system 00:04: [io 0x0cd2-0x0cd3] has been reserved
: system 00:04: [io 0x0cd4-0x0cd5] has been reserved
: system 00:04: [io 0x0cd6-0x0cd7] has been reserved
: system 00:04: [io 0x0cd8-0x0cdf] has been reserved
: system 00:04: [io 0x0b00-0x0b3f] has been reserved
: system 00:04: [io 0x0800-0x089f] has been reserved
: system 00:04: [io 0x0b00-0x0b0f] has been reserved
: system 00:04: [io 0x0b20-0x0b3f] has been reserved
: system 00:04: [io 0x0900-0x090f] has been reserved
: system 00:04: [io 0x0910-0x091f] has been reserved
: system 00:04: [io 0xfe00-0xfefe] has been reserved
: system 00:04: [mem 0xcff00000-0xcfffffff] has been reserved
: system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved
: system 00:04: [mem 0xfec10000-0xfec1001f] has been reserved
: system 00:04: [mem 0xfed40000-0xfed44fff] has been reserved
: system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
: system 00:05: [io 0x0230-0x023f] has been reserved
: system 00:05: [io 0x0290-0x029f] has been reserved
: system 00:05: [io 0x0300-0x030f] has been reserved
: system 00:05: [io 0x0a30-0x0a3f] has been reserved
: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
: system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
: system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
: system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
: system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
: system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
: system 00:07: [mem 0x00100000-0xcfefffff] could not be reserved
: system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved
: system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
: pnp: PnP ACPI: found 8 devices
: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
: pci 0000:00:02.0: PCI bridge to [bus 01]
: pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
: pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
: pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
: pci 0000:00:04.0: PCI bridge to [bus 02]
: pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
: pci 0000:00:04.0: bridge window [mem 0xfeb00000-0xfebfffff]
: pci 0000:00:14.4: PCI bridge to [bus 03]
: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
: pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
: pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff window]
: pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
: pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
: pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
: pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
: pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
: pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
: pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
: pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
: pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
: pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
: pci_bus 0000:03: resource 8 [mem 0xcff00000-0xdfffffff window]
: pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff window]
: NET: Registered protocol family 2
: TCP established hash table entries: 32768 (order: 6, 262144 bytes)
: TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
: TCP: Hash tables configured (established 32768 bind 32768)
: UDP hash table entries: 2048 (order: 4, 65536 bytes)
: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
: NET: Registered protocol family 1
: pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
: pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
: PCI: CLS 64 bytes, default 64
: Unpacking initramfs...
: Freeing initrd memory: 6328K
: PCI-DMA: Disabling AGP.
: PCI-DMA: aperture base @ c4000000 size 65536 KB
: PCI-DMA: using GART IOMMU.
: PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
: LVT offset 1 assigned for vector 0x400
: IBS: LVT offset 1 assigned
: perf: AMD IBS detected (0x0000001f)
: Scanning for low memory corruption every 60 seconds
: Initialise system trusted keyrings
: Key type blacklist registered
: workingset: timestamp_bits=40 max_order=20 bucket_order=0
: zbud: loaded
: Key type asymmetric registered
: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
: io scheduler noop registered
: io scheduler deadline registered
: io scheduler cfq registered (default)
: io scheduler mq-deadline registered
: io scheduler kyber registered
: io scheduler bfq registered
: vesafb: mode is 1024x768x32, linelength=4096, pages=0
: vesafb: scrolling: redraw
: vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
: vesafb: framebuffer at 0xd0000000, mapped to 0xffffa67d40c00000, using 3072k, total 3072k
: Console: switching to colour frame buffer device 128x48
: fb0: VESA VGA frame buffer device
: GHES: HEST is not enabled!
: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
: 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
: Linux agpgart interface v0.103
: rtc_cmos 00:01: RTC can wake from S4
: rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
: rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
: ledtrig-cpu: registered to indicate activity on CPUs
: vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
: NET: Registered protocol family 10
: Segment Routing with IPv6
: NET: Registered protocol family 17
: RAS: Correctable Errors collector initialized.
: microcode: CPU0: patch_level=0x010000c8
: microcode: CPU1: patch_level=0x010000c8
: microcode: CPU2: patch_level=0x010000c8
: microcode: CPU3: patch_level=0x010000c8
: microcode: Microcode Update Driver: v2.2.
: registered taskstats version 1
: Loading compiled-in X.509 certificates
: zswap: loaded using pool lzo/zbud
: Magic number: 13:715:682
: rtc_cmos 00:01: setting system clock to 2017-08-04 12:40:46 UTC (1501850446)
: PM: Hibernation image not present or could not be loaded.
: Freeing unused kernel memory: 1324K
: Write protecting the kernel read-only data: 10240k
: Freeing unused kernel memory: 1640K
: i8042: PNP: No PS/2 controller found.
: i8042: Probing ports directly.
: serio: i8042 KBD port at 0x60,0x64 irq 1
: serio: i8042 AUX port at 0x60,0x64 irq 12
: SCSI subsystem initialized
: libata version 3.00 loaded.
: ahci 0000:00:11.0: version 3.0
: ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
: ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
: ACPI: bus type USB registered
: usbcore: registered new interface driver usbfs
: usbcore: registered new interface driver hub
: usbcore: registered new device driver usb
: scsi host0: ahci
: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
: Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
: ehci-pci: EHCI PCI platform driver
: scsi host1: ahci
: scsi host2: ahci
: scsi host3: ahci
: ata1: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 22
: ata2: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 22
: ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 22
: ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 22
: ehci-pci 0000:00:12.2: EHCI Host Controller
: ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
: ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
: ehci-pci 0000:00:12.2: debug port 1
: ehci-pci 0000:00:12.2: irq 17, io mem 0xfe9ff800
: ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
: hub 1-0:1.0: USB hub found
: hub 1-0:1.0: 6 ports detected
: ehci-pci 0000:00:13.2: EHCI Host Controller
: ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
: ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
: ehci-pci 0000:00:13.2: debug port 1
: ehci-pci 0000:00:13.2: irq 19, io mem 0xfe9ff400
: ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
: hub 2-0:1.0: USB hub found
: hub 2-0:1.0: 6 ports detected
: ohci-pci: OHCI PCI platform driver
: scsi host4: pata_atiixp
: scsi host5: pata_atiixp
: ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
: ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
: ohci-pci 0000:00:12.0: OHCI PCI host controller
: ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
: ohci-pci 0000:00:12.0: irq 16, io mem 0xfe9fe000
: hub 3-0:1.0: USB hub found
: hub 3-0:1.0: 3 ports detected
: ohci-pci 0000:00:12.1: OHCI PCI host controller
: ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
: ohci-pci 0000:00:12.1: irq 16, io mem 0xfe9fd000
: hub 4-0:1.0: USB hub found
: hub 4-0:1.0: 3 ports detected
: ohci-pci 0000:00:13.0: OHCI PCI host controller
: ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
: ohci-pci 0000:00:13.0: irq 18, io mem 0xfe9fc000
: hub 5-0:1.0: USB hub found
: hub 5-0:1.0: 3 ports detected
: ohci-pci 0000:00:13.1: OHCI PCI host controller
: ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
: ohci-pci 0000:00:13.1: irq 18, io mem 0xfe9fb000
: hub 6-0:1.0: USB hub found
: hub 6-0:1.0: 3 ports detected
: ohci-pci 0000:00:14.5: OHCI PCI host controller
: ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
: ohci-pci 0000:00:14.5: irq 18, io mem 0xfe9fa000
: ata3: SATA link down (SStatus 0 SControl 300)
: ata4: SATA link down (SStatus 0 SControl 300)
: hub 7-0:1.0: USB hub found
: hub 7-0:1.0: 2 ports detected
: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
: ata1.00: ATAPI: SONY DVD RW AD-7280S, 1.60, max UDMA/100
: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
: ata1.00: configured for UDMA/100
: ata2.00: ATA-8: ST500DM002-9YN14C, CC4C, max UDMA/133
: ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
: ata2.00: configured for UDMA/133
: scsi 0:0:0:0: CD-ROM SONY DVD RW AD-7280S 1.60 PQ: 0 ANSI: 5
: scsi 1:0:0:0: Direct-Access ATA ST500DM002-9YN14 CC4C PQ: 0 ANSI: 5
: sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
: sd 1:0:0:0: [sda] 4096-byte physical blocks
: sd 1:0:0:0: [sda] Write Protect is off
: sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
: sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
: sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
: cdrom: Uniform CD-ROM driver Revision: 3.20
: sr 0:0:0:0: Attached scsi CD-ROM sr0
: usb 3-1: new low-speed USB device number 2 using ohci-pci
: usb 5-2: new low-speed USB device number 2 using ohci-pci
: sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
: sd 1:0:0:0: [sda] Attached SCSI disk
: hidraw: raw HID events driver (C) Jiri Kosina
: usbcore: registered new interface driver usbhid
: usbhid: USB HID core driver
: input: Kensington Kensington Slimblade Trackball as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:047D:2041.0001/input/input2
: kensington 0003:047D:2041.0001: input,hidraw0: USB HID v1.10 Mouse [Kensington Kensington Slimblade Trackball] on usb-0000:00:12.0-1/input0
: input: HID 046a:0011 as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/0003:046A:0011.0002/input/input3
: hid-generic 0003:046A:0011.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:13.0-2/input0
: tsc: Refined TSC clocksource calibration: 3214.430 MHz
: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e5589bdf5f, max_idle_ns: 440795345747 ns
: random: fast init done
: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
: clocksource: Switched to clocksource tsc
: ip_tables: (C) 2000-2006 Netfilter Core Team
Aug 04 20:40:50 archlinux systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
Aug 04 20:40:50 archlinux systemd[1]: Detected architecture x86-64.
Aug 04 20:40:50 archlinux systemd[1]: Set hostname to <archlinux>.
: random: crng init done
Aug 04 20:40:50 archlinux systemd[1]: /etc/systemd/system/pkb_server.service:7: Unknown lvalue '/* User' in section 'Service'
Aug 04 20:40:50 archlinux systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Aug 04 20:40:50 archlinux systemd[1]: Listening on Journal Socket.
Aug 04 20:40:50 archlinux systemd[1]: Listening on Process Core Dump Socket.
Aug 04 20:40:50 archlinux systemd[1]: Listening on udev Control Socket.
Aug 04 20:40:50 archlinux systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Aug 04 20:40:50 archlinux systemd[1]: Reached target Encrypted Volumes.
: EXT4-fs (sda2): re-mounted. Opts: data=ordered
: acpi_cpufreq: overriding BIOS provided _PSD data
: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
: ACPI: Power Button [PWRB]
: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
: ACPI: Power Button [PWRF]
: wmi: Mapper loaded
: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
: ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20170303/utaddress-247)
: ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\SMRG) (20170303/utaddress-247)
: ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB.PCI0.SBRG.ASOC.SMRG) (20170303/utaddress-247)
: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
: ATK0110 ATK0110:00: Overriding interface detection
: ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
: sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
: sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x3c
: sp5100_tco: failed to find MMIO address, giving up.
: alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [c8:60:00:ec:30:14]
: input: PC Speaker as /devices/platform/pcspkr/input/input6
: snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
: input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
: snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
: snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
: snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
: snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
: snd_hda_codec_realtek hdaudioC0D0: inputs:
: snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
: snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
: snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
: input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
: input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
: input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
: input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
: input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
: kvm: disabled by bios
: mousedev: PS/2 mouse device common for all mice
: MCE: In-kernel MCE decoding enabled.
: alx 0000:02:00.0 enp2s0: renamed from eth0
: EDAC amd64: Node 0: DRAM ECC disabled.
: EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
: EDAC amd64: Node 0: DRAM ECC disabled.
: EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
: [drm] radeon kernel modesetting enabled.
: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
: AMD IOMMUv2 functionality not available on this system
: CRAT table not found
: Finished initializing topology ret=0
: kfd kfd: Initialized module
: checking generic (d0000000 300000) vs hw (d0000000 10000000)
: fb: switching to radeondrmfb from VESA VGA
: Console: switching to colour dummy device 80x25
: [drm] initializing kernel modesetting (BARTS 0x1002:0x6739 0x1787:0x2304 0x00).
: ATOM BIOS: BARTS
: radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
: radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
: [drm] Detected VRAM RAM=1024M, BAR=256M
: [drm] RAM width 256bits DDR
: [TTM] Zone kernel: Available graphics memory: 2024630 kiB
: [TTM] Initializing pool allocator
: [TTM] Initializing DMA pool allocator
: [drm] radeon: 1024M of VRAM memory ready
: [drm] radeon: 1024M of GTT memory ready.
: [drm] Loading BARTS Microcode
: [drm] Internal thermal controller with fan control
: [drm] radeon: dpm initialized
: [drm] GART: num cpu pages 262144, num gpu pages 262144
: [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
: [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
: radeon 0000:01:00.0: WB enabled
: radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8c97232dcc00
: radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8c97232dcc0c
: radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffa67d42232118
: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
: [drm] Driver supports precise vblank timestamp query.
: radeon 0000:01:00.0: radeon: MSI limited to 32-bit
: radeon 0000:01:00.0: radeon: using MSI.
: [drm] radeon: irq initialized.
: [drm] ring test on 0 succeeded in 2 usecs
: [drm] ring test on 3 succeeded in 6 usecs
: [drm] ring test on 5 succeeded in 2 usecs
: [drm] UVD initialized successfully.
: [drm] ib test on ring 0 succeeded in 0 usecs
: [drm] ib test on ring 3 succeeded in 0 usecs
: [drm] ib test on ring 5 succeeded
: [drm] Radeon Display Connectors
: [drm] Connector 0:
: [drm] DP-1
: [drm] HPD4
: [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
: [drm] Encoders:
: [drm] DFP1: INTERNAL_UNIPHY2
: [drm] Connector 1:
: [drm] DP-2
: [drm] HPD5
: [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
: [drm] Encoders:
: [drm] DFP2: INTERNAL_UNIPHY2
: [drm] Connector 2:
: [drm] HDMI-A-1
: [drm] HPD3
: [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
: [drm] Encoders:
: [drm] DFP3: INTERNAL_UNIPHY1
: [drm] Connector 3:
: [drm] DVI-D-1
: [drm] HPD1
: [drm] DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 0x648c
: [drm] Encoders:
: [drm] DFP4: INTERNAL_UNIPHY1
: [drm] Connector 4:
: [drm] DVI-I-1
: [drm] HPD6
: [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
: [drm] Encoders:
: [drm] DFP5: INTERNAL_UNIPHY
: [drm] CRT1: INTERNAL_KLDSCP_DAC1
: it87: Found IT8771E chip at 0x290, revision 2
: ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x00000000000002AF (\_SB.PCI0.SBRG.SIOR.ECRE) (20170303/utaddress-247)
: ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x00000000000002AF (\_SB.PCI0.SBRG.ASOC.SIOE) (20170303/utaddress-247)
: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
: clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc' as unstable because the skew is too large:
: clocksource: 'hpet' wd_now: 9c40b18 wd_last: 9365e35 mask: ffffffff
: clocksource: 'tsc' cs_now: 144a34fcf3 cs_last: 13db149513 mask: ffffffffffffffff
: sched_clock: Marking unstable (11314609361, -1437765)<-(11421717152, -108545556)
: tsc: Marking TSC unstable due to clocksource watchdog
: clocksource: Switched to clocksource hpet
: hrtimer: interrupt took 168082483 ns
: [drm:atom_op_jump [radeon]] *ERROR* atombios stuck in loop for more than 5secs aborting
: [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing D3A6 (len 62, WS 0, PS 0) @ 0xD3C2
: IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
: alx 0000:02:00.0 enp2s0: NIC Up: 100 Mbps Full
: IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
: [drm:atom_op_jump [radeon]] *ERROR* atombios stuck in loop for more than 5secs aborting
: [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing D3A6 (len 62, WS 0, PS 0) @ 0xD3C2
: [drm:atom_op_jump [radeon]] *ERROR* atombios stuck in loop for more than 5secs aborting
: [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing D3A6 (len 62, WS 0, PS 0) @ 0xD3C2
: [drm:atom_op_jump [radeon]] *ERROR* atombios stuck in loop for more than 5secs aborting
: [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing D3A6 (len 62, WS 0, PS 0) @ 0xD3C2
: [drm:atom_op_jump [radeon]] *ERROR* atombios stuck in loop for more than 5secs aborting
: [drm:atom_execute_table_locked [radeon]] *ERROR* atombios stuck executing D3A6 (len 62, WS 0, PS 0) @ 0xD3C2
: [drm] fb mappable at 0xD0363000
: [drm] vram apper at 0xD0000000
: [drm] size 3145728
: [drm] fb depth is 24
: [drm] pitch is 4096
: fbcon: radeondrmfb (fb0) is primary device
: Console: switching to colour frame buffer device 128x48
: radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
: [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
: snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
: fuse init (API version 7.26)
: radeon_dp_aux_transfer_native: 326 callbacks suppressed
: radeon_dp_aux_transfer_native: 74 callbacks suppressedthe error message "atombios stuck in loop for more than 5secs aborting" search result online gives me the solution to disable dpm.
I marked the post as solved but I think a title describing the mis-bahavior instead of the cause will help others better. because the system stalls for a very long time more than 2 minutes. say , if a guy encounters the same problem, such a long stall and "no signal" on screen will make him think it is a system dead freezing or display problem instead of a long stall. on the other side , if the guy can find out it is actually a long stall, he will most likely to find out the error message ( “ atombios stuck in loop for more than 5secs aborting ” )， searching on google will solve the problem easily. but you know, my English is bad, I don't know if the current title make sense to others, so any good suggestion will be appreciated.
Last edited by socialloser1 (2017-08-07 14:55:11)
Offline