You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2017-08-08 01:00:56
- yufeiluo
- Member
- Registered: 2017-08-08
- Posts: 8
How to mount partition with mount command?
My arch was installed on sda3, debian was installed on sda2.
sudo blkid
/dev/sda1: UUID="7E91-CA50" TYPE="vfat" PARTUUID="e0c51e12-9954-4cb9-ae62-cebdec976e88"
/dev/sda3: UUID="a872403e-0f73-4c64-8530-0f286fe6a4ee" TYPE="ext4" PARTLABEL="arch" PARTUUID="4329e96c-6d71-4259-9f2a-534b130aae65"
/dev/sda4: UUID="eb4181c2-93ee-4f2d-8e27-5c40512b5293" TYPE="swap" PARTUUID="03d13d65-9504-4703-97e8-794171f3a9a7"
/dev/sda2: PARTLABEL="debian" PARTUUID="4bfda6e3-70fa-4316-a01e-475c53e0b51b"
/dev/sda5: PARTUUID="9a1fdb1d-a3c3-494a-a43f-24215320e2cc"
sudo fdisk -l
Disk /dev/sda: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: F29018A3-5A1D-41A5-B30D-DEF536D2E361
Device Start End Sectors Size Type
/dev/sda1 2048 117186559 117184512 55.9G Microsoft basic data
/dev/sda2 117186560 195311615 78125056 37.3G BIOS boot
/dev/sda3 195311616 312500223 117188608 55.9G Linux filesystem
/dev/sda4 312500224 314454015 1953792 954M Linux filesystem
/dev/sda5 314454016 332031999 17577984 8.4G Linux filesystem
To enter into arch ,i want to mount /dev/sda2.
sudo mount -t boot -o rw /dev/sda2 /tmp
sudo mount -o rw /dev/sda2 /tmp
None of them can mount it.
Offline
#2 2017-08-08 01:32:44
- jasonwryan
- Anarchist
- From: .nz
- Registered: 2009-05-09
- Posts: 30,426
- Website
Re: How to mount partition with mount command?
How did you install Arch?
Offline
#3 2017-08-08 01:47:14
- yufeiluo
- Member
- Registered: 2017-08-08
- Posts: 8
Re: How to mount partition with mount command?
I install arch this way.
1.To enter into debian,and download arch iso file.
2. dd if=arch.iso of=/dev/sdb
3.boot with usb
4.do as the manual in arch wiki.
Offline
#4 2017-08-08 01:54:52
- jasonwryan
- Anarchist
- From: .nz
- Registered: 2009-05-09
- Posts: 30,426
- Website
Re: How to mount partition with mount command?
...and yet you don't know how to mount a partition?
And what do you think mounting your /boot on /tmp will actually achieve? How will that "enter into arch"?
Offline
#5 2017-08-08 07:38:17
- Jeroen)Mathon
- Member
- From: Netherlands
- Registered: 2013-08-29
- Posts: 82
Re: How to mount partition with mount command?
Hey Yufeiluo,
Have you tried consulting the man page of mount?`man mount`
Also what type of filesystem are you attempting to mount and what command are you using for that?
Offline
#6 2017-08-08 07:46:41
- Slithery
- Administrator
- From: Norfolk, UK
- Registered: 2013-12-01
- Posts: 5,776
Re: How to mount partition with mount command?
You'll never be able to mount sda2 as it's a GRUB BIOS boot partition which doesn't contain a filesystem.
It's only used to store the grub payload which would usually live in the post-MBR gap on an ms-dos partitioned drive.
It's only meant to be 2MB in size, I've no idea why you made yours 37GB?
https://wiki.archlinux.org/index.php/GR … structions
Edit - I see sda2 has the label debian, if this was your debian partition that you've changed the partition type on then you've really messed up the installation somehow.
Last edited by Slithery (2017-08-08 07:49:02)
Offline
Pages: 1