You are not logged in.

Pages: 1

#1 2017-09-05 11:30:35

yashtewari
Member
Registered: 2017-09-03
Posts: 12

[SOLVED] X11: startx hangs the entire system

I recently installed Arch, and had managed to get xterm working, but after trying to switch over to XFCE, startx hangs the system.

Running startx after removing startxfce4 and switching back to xterm still either completely hangs the system (can't open other tty) or opens a blank screen which goes away after killing Xorg from other tty.

Output that might be useful:

$ pacman -Q nvidia
nvidia 384.59-5
$ lspci -k | grep -A 2 -E "(VGA|3D)"
00:02.0 VGA compatible controller: Intel Corporation Device 591b (rev 04)
    Subsystem: Micro-Star International Co., Ltd. [MSI] Device 11ad
    Kernel driver in use: i915
--
01:00.0 VGA compatible controller: NVIDIA Corporation GP106M [GeForce GTX 1060 Mobile] (rev ff)
    Kernel modules: nouveau, nvidia_drm, nvidia
3d:00.0 Ethernet controller: Qualcomm Atheros Device e0b1 (rev 10)
$ cat .xinitrc
#!/bin/sh

userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap

# merge in defaults and keymaps

if [ -f $sysresources ]; then







    xrdb -merge $sysresources

fi

if [ -f $sysmodmap ]; then
    xmodmap $sysmodmap
fi

if [ -f "$userresources" ]; then







    xrdb -merge "$userresources"

fi

if [ -f "$usermodmap" ]; then
    xmodmap "$usermodmap"
fi

# start some nice programs

if [ -d /etc/X11/xinit/xinitrc.d ] ; then
 for f in /etc/X11/xinit/xinitrc.d/?*.sh ; do
  [ -x "$f" ] && . "$f"
 done
 unset f
fi

twm &
xclock -geometry 50x50-1+1 &
xterm -geometry 80x50+494+51 &
xterm -geometry 80x20+494-0 &
exec xterm -geometry 80x66+0+0 -name login
$ cat /var/log/Xorg.0.log
[  1846.677] 
X.Org X Server 1.19.3
Release Date: 2017-03-15
[  1846.677] X Protocol Version 11, Revision 0
[  1846.678] Build Operating System: Linux 4.12.5-1-ARCH x86_64 
[  1846.678] Current Operating System: Linux archlinux 4.12.8-1-ARCH #1 SMP PREEMPT Thu Aug 17 08:37:20 CEST 2017 x86_64
[  1846.678] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=dcb1e8e4-594a-47ae-94e4-7509dfd02806 rw quiet
[  1846.678] Build Date: 13 August 2017  09:37:50PM
[  1846.678]  
[  1846.678] Current version of pixman: 0.34.0
[  1846.678]     Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
[  1846.678] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1846.678] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep  4 12:00:16 2017
[  1846.678] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1846.678] (==) No Layout section.  Using the first Screen section.
[  1846.678] (==) No screen section available. Using defaults.
[  1846.678] (**) |-->Screen "Default Screen Section" (0)
[  1846.678] (**) |   |-->Monitor "<default monitor>"
[  1846.678] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[  1846.678] (==) Automatically adding devices
[  1846.678] (==) Automatically enabling devices
[  1846.678] (==) Automatically adding GPU devices
[  1846.678] (==) Automatically binding GPU devices
[  1846.678] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  1846.678] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  1846.678]     Entry deleted from font path.
[  1846.678] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
[  1846.678] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1846.678] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1846.678] (II) Loader magic: 0xdf6dd61d40
[  1846.678] (II) Module ABI versions:
[  1846.678]     X.Org ANSI C Emulation: 0.4
[  1846.678]     X.Org Video Driver: 23.0
[  1846.678]     X.Org XInput driver : 24.1
[  1846.678]     X.Org Server Extension : 10.0
[  1846.679] (++) using VT number 1

[  1846.679] (--) controlling tty is VT number 1, auto-enabling KeepTty
[  1846.680] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[  1846.680] (II) xfree86: Adding drm device (/dev/dri/card1)
[  1846.680] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 11 paused 0
[  1846.680] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1846.681] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[  1846.681] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules"
[  1846.681] (**) OutputClass "nvidia" setting /dev/dri/card1 as PrimaryGPU
[  1846.682] (--) PCI: (0:0:2:0) 8086:591b:1462:11ad rev 4, Mem @ 0xdd000000/16777216, 0x70000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[  1846.682] (--) PCI:*(0:1:0:0) 10de:1c20:1462:11ad rev 161, Mem @ 0xde000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[  1846.682] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  1846.682] (II) LoadModule: "glx"
[  1846.682] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[  1846.684] (II) Module glx: vendor="NVIDIA Corporation"
[  1846.684]     compiled for 4.0.2, module version = 1.0.0
[  1846.684]     Module class: X.Org Server Extension
[  1846.684] (II) NVIDIA GLX Module  384.59  Wed Jul 19 23:41:15 PDT 2017
[  1846.684] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[  1846.684]     loading driver: nvidia
[  1846.684] (II) Applying OutputClass "intel" to /dev/dri/card0
[  1846.684]     loading driver: modesetting
[  1846.684] (==) Matched nvidia as autoconfigured driver 0
[  1846.684] (==) Matched nouveau as autoconfigured driver 1
[  1846.684] (==) Matched nv as autoconfigured driver 2
[  1846.684] (==) Matched modesetting as autoconfigured driver 3
[  1846.684] (==) Matched intel as autoconfigured driver 4
[  1846.684] (==) Matched nouveau as autoconfigured driver 5
[  1846.684] (==) Matched nv as autoconfigured driver 6
[  1846.684] (==) Matched modesetting as autoconfigured driver 7
[  1846.684] (==) Matched fbdev as autoconfigured driver 8
[  1846.684] (==) Matched vesa as autoconfigured driver 9
[  1846.684] (==) Assigned the driver to the xf86ConfigLayout
[  1846.684] (II) LoadModule: "nvidia"
[  1846.684] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  1846.685] (II) Module nvidia: vendor="NVIDIA Corporation"
[  1846.685]     compiled for 4.0.2, module version = 1.0.0
[  1846.685]     Module class: X.Org Video Driver
[  1846.685] (II) LoadModule: "nouveau"
[  1846.685] (WW) Warning, couldn't open module nouveau
[  1846.685] (II) UnloadModule: "nouveau"
[  1846.685] (II) Unloading nouveau
[  1846.685] (EE) Failed to load module "nouveau" (module does not exist, 0)
[  1846.685] (II) LoadModule: "nv"
[  1846.685] (WW) Warning, couldn't open module nv
[  1846.685] (II) UnloadModule: "nv"
[  1846.685] (II) Unloading nv
[  1846.685] (EE) Failed to load module "nv" (module does not exist, 0)
[  1846.685] (II) LoadModule: "modesetting"
[  1846.685] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  1846.685] (II) Module modesetting: vendor="X.Org Foundation"
[  1846.685]     compiled for 1.19.3, module version = 1.19.3
[  1846.685]     Module class: X.Org Video Driver
[  1846.685]     ABI class: X.Org Video Driver, version 23.0
[  1846.685] (II) LoadModule: "intel"
[  1846.685] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  1846.685] (II) Module intel: vendor="X.Org Foundation"
[  1846.685]     compiled for 1.19.3, module version = 2.99.917
[  1846.685]     Module class: X.Org Video Driver
[  1846.685]     ABI class: X.Org Video Driver, version 23.0
[  1846.685] (II) LoadModule: "fbdev"
[  1846.685] (WW) Warning, couldn't open module fbdev
[  1846.685] (II) UnloadModule: "fbdev"
[  1846.685] (II) Unloading fbdev
[  1846.685] (EE) Failed to load module "fbdev" (module does not exist, 0)
[  1846.685] (II) LoadModule: "vesa"
[  1846.685] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  1846.685] (II) Module vesa: vendor="X.Org Foundation"
[  1846.685]     compiled for 1.19.3, module version = 2.3.4
[  1846.685]     Module class: X.Org Video Driver
[  1846.685]     ABI class: X.Org Video Driver, version 23.0
[  1846.685] (II) NVIDIA dlloader X Driver  384.59  Wed Jul 19 23:14:49 PDT 2017
[  1846.685] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  1846.685] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  1846.685] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[  1846.686] (II) intel: Driver for Intel(R) HD Graphics
[  1846.686] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[  1846.686] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[  1846.686] (II) VESA: driver for VESA chipsets: vesa
[  1846.686] (II) systemd-logind: releasing fd for 226:1
[  1846.686] (II) Loading sub module "fb"
[  1846.686] (II) LoadModule: "fb"
[  1846.686] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1846.686] (II) Module fb: vendor="X.Org Foundation"
[  1846.686]     compiled for 1.19.3, module version = 1.0.0
[  1846.686]     ABI class: X.Org ANSI C Emulation, version 0.4
[  1846.686] (II) Loading sub module "wfb"
[  1846.686] (II) LoadModule: "wfb"
[  1846.686] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  1846.686] (II) Module wfb: vendor="X.Org Foundation"
[  1846.686]     compiled for 1.19.3, module version = 1.0.0
[  1846.686]     ABI class: X.Org ANSI C Emulation, version 0.4
[  1846.686] (II) Loading sub module "ramdac"
[  1846.686] (II) LoadModule: "ramdac"
[  1846.686] (II) Module "ramdac" already built-in
[  1846.687] (WW) Falling back to old probe method for modesetting
[  1846.687] (WW) Falling back to old probe method for vesa
[  1846.687] (II) modeset(G0): using drv /dev/dri/card0
[  1846.687] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[  1846.687] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[  1846.687] (==) NVIDIA(0): RGB weight 888
[  1846.687] (==) NVIDIA(0): Default visual is TrueColor
[  1846.687] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  1846.687] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[  1846.687] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[  1846.687] (**) NVIDIA(0): Enabling 2D acceleration
[  1848.723] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[  1848.723] (--) NVIDIA(0):     DFP-0
[  1848.723] (--) NVIDIA(0):     DFP-1
[  1848.723] (--) NVIDIA(0):     DFP-2
[  1848.724] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1060 (GP106-A) at PCI:1:0:0 (GPU-0)
[  1848.724] (--) NVIDIA(0): Memory: 6291456 kBytes
[  1848.724] (--) NVIDIA(0): VideoBIOS: 86.06.18.00.18
[  1848.724] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[  1848.724] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  1848.724] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[  1848.724] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[  1848.724] (--) NVIDIA(GPU-0): 
[  1848.724] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  1848.724] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[  1848.724] (--) NVIDIA(GPU-0): DFP-1: 1440.0 MHz maximum pixel clock
[  1848.724] (--) NVIDIA(GPU-0): 
[  1848.724] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  1848.724] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[  1848.724] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[  1848.724] (--) NVIDIA(GPU-0): 
[  1848.724] (==) NVIDIA(0): 
[  1848.724] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[  1848.724] (==) NVIDIA(0):     will be used as the requested mode.
[  1848.724] (==) NVIDIA(0): 
[  1848.724] (--) NVIDIA(0): No enabled display devices found; starting anyway because
[  1848.724] (--) NVIDIA(0):     AllowEmptyInitialConfiguration is enabled
[  1848.724] (II) NVIDIA(0): Validated MetaModes:
[  1848.724] (II) NVIDIA(0):     "NULL"
[  1848.724] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[  1848.724] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[  1848.724] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[  1848.724] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[  1848.724] (==) modeset(G0): RGB weight 888
[  1848.724] (==) modeset(G0): Default visual is TrueColor
[  1848.724] (II) Loading sub module "glamoregl"
[  1848.724] (II) LoadModule: "glamoregl"
[  1848.724] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[  1848.725] (II) Module glamoregl: vendor="X.Org Foundation"
[  1848.725]     compiled for 1.19.3, module version = 1.0.0
[  1848.725]     ABI class: X.Org ANSI C Emulation, version 0.4
[  1848.725] (II) glamor: OpenGL accelerated X.org driver based.
[  1848.733] (II) glamor: EGL version 1.4 (DRI2):
[  1848.735] (II) modeset(G0): glamor initialized
[  1848.737] (II) modeset(G0): Output eDP-1-1 has no monitor section
[  1848.739] (II) modeset(G0): Output DP-1-1 has no monitor section
[  1848.748] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[  1848.749] (II) modeset(G0): EDID for output eDP-1-1
[  1848.749] (II) modeset(G0): Manufacturer: CMN  Model: 15d6  Serial#: 0
[  1848.749] (II) modeset(G0): Year: 2015  Week: 38
[  1848.749] (II) modeset(G0): EDID Version: 1.4
[  1848.749] (II) modeset(G0): Digital Display Input
[  1848.749] (II) modeset(G0): 6 bits per channel
[  1848.749] (II) modeset(G0): Digital interface is DisplayPort
[  1848.749] (II) modeset(G0): Max Image Size [cm]: horiz.: 34  vert.: 19
[  1848.749] (II) modeset(G0): Gamma: 2.20
[  1848.749] (II) modeset(G0): No DPMS capabilities specified
[  1848.749] (II) modeset(G0): Supported color encodings: RGB 4:4:4 
[  1848.749] (II) modeset(G0): First detailed timing is preferred mode
[  1848.749] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[  1848.749] (II) modeset(G0): redX: 0.673 redY: 0.309   greenX: 0.266 greenY: 0.674
[  1848.749] (II) modeset(G0): blueX: 0.156 blueY: 0.047   whiteX: 0.313 whiteY: 0.329
[  1848.749] (II) modeset(G0): Manufacturer's mask: 0
[  1848.749] (II) modeset(G0): Supported detailed timing:
[  1848.749] (II) modeset(G0): clock: 152.8 MHz   Image Size:  344 x 193 mm
[  1848.749] (II) modeset(G0): h_active: 1920  h_sync: 1964  h_sync_end 1992 h_blank_end 2250 h_border: 0
[  1848.749] (II) modeset(G0): v_active: 1080  v_sync: 1082  v_sync_end 1086 v_blanking: 1132 v_border: 0
[  1848.749] (II) modeset(G0):  N156HGA-EAL
[  1848.749] (II) modeset(G0):  CMN
[  1848.749] (II) modeset(G0):  N156HGA-EAL
[  1848.749] (II) modeset(G0): EDID (in hex):
[  1848.749] (II) modeset(G0):     00ffffffffffff000daed61500000000
[  1848.749] (II) modeset(G0):     2619010495221378024205ac4f44ac28
[  1848.749] (II) modeset(G0):     0c505400000001010101010101010101
[  1848.749] (II) modeset(G0):     010101010101b43b804a713834402c1c
[  1848.749] (II) modeset(G0):     240058c110000018000000fe004e3135
[  1848.749] (II) modeset(G0):     364847412d45414c0a20000000fe0043
[  1848.749] (II) modeset(G0):     4d4e0a202020202020202020000000fe
[  1848.749] (II) modeset(G0):     004e3135364847412d45414c0a200073
[  1848.749] (II) modeset(G0): Printing probed modes for output eDP-1-1
[  1848.749] (II) modeset(G0): Modeline "1920x1080"x60.0  152.84  1920 1964 1992 2250  1080 1082 1086 1132 -hsync -vsync (67.9 kHz eP)
[  1848.749] (II) modeset(G0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[  1848.749] (II) modeset(G0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[  1848.749] (II) modeset(G0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[  1848.749] (II) modeset(G0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[  1848.749] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[  1848.749] (II) modeset(G0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[  1848.749] (II) modeset(G0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[  1848.749] (II) modeset(G0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[  1848.749] (II) modeset(G0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[  1848.749] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[  1848.749] (II) modeset(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[  1848.749] (II) modeset(G0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[  1848.749] (II) modeset(G0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[  1848.749] (II) modeset(G0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[  1848.749] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[  1848.749] (II) modeset(G0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[  1848.749] (II) modeset(G0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[  1848.749] (II) modeset(G0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[  1848.749] (II) modeset(G0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[  1848.751] (II) modeset(G0): EDID for output DP-1-1
[  1848.760] (II) modeset(G0): EDID for output HDMI-1-1
[  1848.760] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[  1848.760] (==) modeset(G0): DPI set to (96, 96)
[  1848.760] (II) Loading sub module "fb"
[  1848.760] (II) LoadModule: "fb"
[  1848.760] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1848.760] (II) Module fb: vendor="X.Org Foundation"
[  1848.760]     compiled for 1.19.3, module version = 1.0.0
[  1848.760]     ABI class: X.Org ANSI C Emulation, version 0.4
[  1848.760] (II) UnloadModule: "intel"
[  1848.760] (II) Unloading intel
[  1848.760] (II) UnloadModule: "vesa"
[  1848.760] (II) Unloading vesa
[  1848.760] (--) Depth 24 pixmap format is 32 bpp
[  1848.807] (==) modeset(G0): Backing store enabled
[  1848.807] (==) modeset(G0): Silken mouse enabled
[  1848.807] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  1848.808] (==) modeset(G0): DPMS enabled
[  1848.808] (II) modeset(G0): [DRI2] Setup complete
[  1848.808] (II) modeset(G0): [DRI2]   DRI driver: i965
[  1848.808] (II) modeset(G0): [DRI2]   VDPAU driver: i965
[  1848.808] (II) NVIDIA: Using 49152.00 MB of virtual memory for indirect memory
[  1848.808] (II) NVIDIA:     access.
[  1848.816] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[  1848.816] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[  1848.816] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[  1848.816] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[  1848.816] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[  1848.816] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[  1848.816] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[  1848.816] (II) NVIDIA(0):     Config Options in the README.
[  1848.828] (II) NVIDIA(0): Setting mode "NULL"
[  1848.833] (==) NVIDIA(0): Disabling shared memory pixmaps
[  1848.833] (==) NVIDIA(0): Backing store enabled
[  1848.833] (==) NVIDIA(0): Silken mouse enabled
[  1848.833] (==) NVIDIA(0): DPMS enabled
[  1848.833] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[  1848.833] (II) Loading sub module "dri2"
[  1848.833] (II) LoadModule: "dri2"
[  1848.833] (II) Module "dri2" already built-in
[  1848.833] (II) NVIDIA(0): [DRI2] Setup complete
[  1848.833] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[  1848.833] (--) RandR disabled
[  1848.835] (II) Initializing extension GLX
[  1848.835] (II) Indirect GLX disabled.
[  1849.097] (II) modeset(G0): Damage tracking initialized
[  1849.163] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[  1849.163] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  1849.163] (II) LoadModule: "libinput"
[  1849.164] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  1849.165] (II) Module libinput: vendor="X.Org Foundation"
[  1849.165]     compiled for 1.19.3, module version = 0.25.1
[  1849.165]     Module class: X.Org XInput Driver
[  1849.165]     ABI class: X.Org XInput driver, version 24.1
[  1849.165] (II) Using input driver 'libinput' for 'Power Button'
[  1849.165] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 40 paused 0
[  1849.165] (**) Power Button: always reports core events
[  1849.165] (**) Option "Device" "/dev/input/event4"
[  1849.165] (**) Option "_source" "server/udev"
[  1849.165] (II) event4  - (II) Power Button: (II) is tagged by udev as: Keyboard
[  1849.165] (II) event4  - (II) Power Button: (II) device is a keyboard
[  1849.165] (II) event4  - (II) Power Button: (II) device removed
[  1849.165] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[  1849.165] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1849.166] (II) event4  - (II) Power Button: (II) is tagged by udev as: Keyboard
[  1849.166] (II) event4  - (II) Power Button: (II) device is a keyboard
[  1849.166] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[  1849.166] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  1849.166] (II) Using input driver 'libinput' for 'Video Bus'
[  1849.166] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 43 paused 0
[  1849.166] (**) Video Bus: always reports core events
[  1849.166] (**) Option "Device" "/dev/input/event7"
[  1849.166] (**) Option "_source" "server/udev"
[  1849.167] (II) event7  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[  1849.167] (II) event7  - (II) Video Bus: (II) device is a keyboard
[  1849.167] (II) event7  - (II) Video Bus: (II) device removed
[  1849.167] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event7"
[  1849.167] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  1849.167] (II) event7  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[  1849.167] (II) event7  - (II) Video Bus: (II) device is a keyboard
[  1849.167] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[  1849.167] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  1849.167] (II) Using input driver 'libinput' for 'Video Bus'
[  1849.167] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 44 paused 0
[  1849.167] (**) Video Bus: always reports core events
[  1849.167] (**) Option "Device" "/dev/input/event8"
[  1849.167] (**) Option "_source" "server/udev"
[  1849.168] (II) event8  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[  1849.168] (II) event8  - (II) Video Bus: (II) device is a keyboard
[  1849.168] (II) event8  - (II) Video Bus: (II) device removed
[  1849.168] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input10/event8"
[  1849.168] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[  1849.168] (II) event8  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[  1849.168] (II) event8  - (II) Video Bus: (II) device is a keyboard
[  1849.168] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[  1849.168] (II) No input driver specified, ignoring this device.
[  1849.168] (II) This device may have been added with another device file.
[  1849.168] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  1849.168] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  1849.168] (II) Using input driver 'libinput' for 'Power Button'
[  1849.169] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 45 paused 0
[  1849.169] (**) Power Button: always reports core events
[  1849.169] (**) Option "Device" "/dev/input/event3"
[  1849.169] (**) Option "_source" "server/udev"
[  1849.169] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[  1849.169] (II) event3  - (II) Power Button: (II) device is a keyboard
[  1849.169] (II) event3  - (II) Power Button: (II) device removed
[  1849.169] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[  1849.169] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[  1849.169] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[  1849.169] (II) event3  - (II) Power Button: (II) device is a keyboard
[  1849.169] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[  1849.169] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[  1849.169] (II) Using input driver 'libinput' for 'Sleep Button'
[  1849.170] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 46 paused 0
[  1849.170] (**) Sleep Button: always reports core events
[  1849.170] (**) Option "Device" "/dev/input/event2"
[  1849.170] (**) Option "_source" "server/udev"
[  1849.170] (II) event2  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[  1849.170] (II) event2  - (II) Sleep Button: (II) device is a keyboard
[  1849.170] (II) event2  - (II) Sleep Button: (II) device removed
[  1849.170] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
[  1849.170] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[  1849.170] (II) event2  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[  1849.170] (II) event2  - (II) Sleep Button: (II) device is a keyboard
[  1849.170] (II) config/udev: Adding input device NEC HD WebCam (/dev/input/event5)
[  1849.170] (**) NEC HD WebCam: Applying InputClass "libinput keyboard catchall"
[  1849.170] (II) Using input driver 'libinput' for 'NEC HD WebCam'
[  1849.171] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 47 paused 0
[  1849.171] (**) NEC HD WebCam: always reports core events
[  1849.171] (**) Option "Device" "/dev/input/event5"
[  1849.171] (**) Option "_source" "server/udev"
[  1849.171] (II) event5  - (II) NEC HD WebCam: (II) is tagged by udev as: Keyboard
[  1849.171] (II) event5  - (II) NEC HD WebCam: (II) device is a keyboard
[  1849.171] (II) event5  - (II) NEC HD WebCam: (II) device removed
[  1849.171] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input6/event5"
[  1849.171] (II) XINPUT: Adding extended input device "NEC HD WebCam" (type: KEYBOARD, id 11)
[  1849.171] (II) event5  - (II) NEC HD WebCam: (II) is tagged by udev as: Keyboard
[  1849.171] (II) event5  - (II) NEC HD WebCam: (II) device is a keyboard
[  1849.172] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[  1849.172] (II) No input driver specified, ignoring this device.
[  1849.172] (II) This device may have been added with another device file.
[  1849.172] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[  1849.172] (II) No input driver specified, ignoring this device.
[  1849.172] (II) This device may have been added with another device file.
[  1849.172] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[  1849.172] (II) No input driver specified, ignoring this device.
[  1849.172] (II) This device may have been added with another device file.
[  1849.172] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[  1849.172] (II) No input driver specified, ignoring this device.
[  1849.172] (II) This device may have been added with another device file.
[  1849.172] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[  1849.172] (II) No input driver specified, ignoring this device.
[  1849.172] (II) This device may have been added with another device file.
[  1849.172] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event15)
[  1849.172] (II) No input driver specified, ignoring this device.
[  1849.172] (II) This device may have been added with another device file.
[  1849.172] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event16)
[  1849.172] (II) No input driver specified, ignoring this device.
[  1849.172] (II) This device may have been added with another device file.
[  1849.172] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  1849.172] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[  1849.172] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[  1849.173] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 48 paused 0
[  1849.173] (**) AT Translated Set 2 keyboard: always reports core events
[  1849.173] (**) Option "Device" "/dev/input/event0"
[  1849.173] (**) Option "_source" "server/udev"
[  1849.173] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[  1849.173] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[  1849.173] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[  1849.173] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  1849.173] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[  1849.173] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[  1849.173] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[  1849.173] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event17)
[  1849.173] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[  1849.173] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[  1849.174] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 49 paused 0
[  1849.174] (**) ETPS/2 Elantech Touchpad: always reports core events
[  1849.174] (**) Option "Device" "/dev/input/event17"
[  1849.174] (**) Option "_source" "server/udev"
[  1849.174] (II) event17 - (II) ETPS/2 Elantech Touchpad: (II) is tagged by udev as: Touchpad
[  1849.174] (II) event17 - (II) ETPS/2 Elantech Touchpad: (II) device is a touchpad
[  1849.174] (II) event17 - (II) ETPS/2 Elantech Touchpad: (II) device removed
[  1849.174] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event17"
[  1849.174] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[  1849.174] (**) Option "AccelerationScheme" "none"
[  1849.174] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[  1849.174] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[  1849.174] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[  1849.174] (II) event17 - (II) ETPS/2 Elantech Touchpad: (II) is tagged by udev as: Touchpad
[  1849.174] (II) event17 - (II) ETPS/2 Elantech Touchpad: (II) device is a touchpad
[  1849.175] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[  1849.175] (II) No input driver specified, ignoring this device.
[  1849.175] (II) This device may have been added with another device file.
[  1849.175] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[  1849.175] (II) No input driver specified, ignoring this device.
[  1849.175] (II) This device may have been added with another device file.
[  1849.175] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event9)
[  1849.175] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[  1849.175] (II) Using input driver 'libinput' for 'MSI WMI hotkeys'
[  1849.175] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 50 paused 0
[  1849.175] (**) MSI WMI hotkeys: always reports core events
[  1849.175] (**) Option "Device" "/dev/input/event9"
[  1849.175] (**) Option "_source" "server/udev"
[  1849.175] (II) event9  - (II) MSI WMI hotkeys: (II) is tagged by udev as: Keyboard
[  1849.175] (II) event9  - (II) MSI WMI hotkeys: (II) device is a keyboard
[  1849.175] (II) event9  - (II) MSI WMI hotkeys: (II) device removed
[  1849.175] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event9"
[  1849.175] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 14)
[  1849.176] (II) event9  - (II) MSI WMI hotkeys: (II) is tagged by udev as: Keyboard
[  1849.176] (II) event9  - (II) MSI WMI hotkeys: (II) device is a keyboard
[  1862.759] (**) Option "fd" "40"
[  1862.759] (II) event4  - (II) Power Button: (II) device removed
[  1862.760] (**) Option "fd" "43"
[  1862.760] (II) event7  - (II) Video Bus: (II) device removed
[  1862.760] (**) Option "fd" "44"
[  1862.760] (II) event8  - (II) Video Bus: (II) device removed
[  1862.760] (**) Option "fd" "45"
[  1862.760] (II) event3  - (II) Power Button: (II) device removed
[  1862.760] (**) Option "fd" "46"
[  1862.760] (II) event2  - (II) Sleep Button: (II) device removed
[  1862.760] (**) Option "fd" "47"
[  1862.760] (II) event5  - (II) NEC HD WebCam: (II) device removed
[  1862.760] (**) Option "fd" "48"
[  1862.760] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[  1862.760] (**) Option "fd" "49"
[  1862.760] (II) event17 - (II) ETPS/2 Elantech Touchpad: (II) device removed
[  1862.761] (**) Option "fd" "50"
[  1862.761] (II) event9  - (II) MSI WMI hotkeys: (II) device removed
[  1863.042] (II) systemd-logind: got pause for 226:0
[  1863.042] (II) systemd-logind: got pause for 13:72
[  1863.042] (II) systemd-logind: got pause for 13:69
[  1863.042] (II) systemd-logind: got pause for 13:67
[  1863.042] (II) systemd-logind: got pause for 13:71
[  1863.042] (II) systemd-logind: got pause for 13:66
[  1863.042] (II) systemd-logind: got pause for 13:64
[  1863.042] (II) systemd-logind: got pause for 13:81
[  1863.042] (II) systemd-logind: got pause for 13:73
[  1863.042] (II) systemd-logind: got pause for 13:68
[  1864.195] (II) systemd-logind: got resume for 226:0
[  1864.195] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  1864.195] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[  1864.195] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[  1864.195] (--) NVIDIA(GPU-0): 
[  1864.195] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  1864.195] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[  1864.195] (--) NVIDIA(GPU-0): DFP-1: 1440.0 MHz maximum pixel clock
[  1864.195] (--) NVIDIA(GPU-0): 
[  1864.195] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  1864.195] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[  1864.195] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[  1864.195] (--) NVIDIA(GPU-0): 
[  1864.197] (II) NVIDIA(0): Setting mode "NULL"
[  1864.201] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[  1864.201] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[  1864.201] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[  1864.201] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[  1864.201] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[  1864.201] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[  1864.201] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[  1864.201] (II) NVIDIA(0):     Config Options in the README.
[  1865.262] (II) systemd-logind: got resume for 13:72
[  1865.262] (II) event8  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[  1865.262] (II) event8  - (II) Video Bus: (II) device is a keyboard
[  1865.262] (II) systemd-logind: got resume for 13:69
[  1865.262] (II) event5  - (II) NEC HD WebCam: (II) is tagged by udev as: Keyboard
[  1865.262] (II) event5  - (II) NEC HD WebCam: (II) device is a keyboard
[  1865.262] (II) systemd-logind: got resume for 13:67
[  1865.262] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[  1865.262] (II) event3  - (II) Power Button: (II) device is a keyboard
[  1865.262] (II) systemd-logind: got resume for 13:71
[  1865.262] (II) event7  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[  1865.262] (II) event7  - (II) Video Bus: (II) device is a keyboard
[  1865.263] (II) systemd-logind: got resume for 13:66
[  1865.263] (II) event2  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[  1865.263] (II) event2  - (II) Sleep Button: (II) device is a keyboard
[  1865.263] (II) systemd-logind: got resume for 13:64
[  1865.263] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[  1865.263] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[  1865.263] (II) systemd-logind: got resume for 13:81
[  1865.263] (II) event17 - (II) ETPS/2 Elantech Touchpad: (II) is tagged by udev as: Touchpad
[  1865.263] (II) event17 - (II) ETPS/2 Elantech Touchpad: (II) device is a touchpad
[  1865.263] (II) systemd-logind: got resume for 13:73
[  1865.263] (II) event9  - (II) MSI WMI hotkeys: (II) is tagged by udev as: Keyboard
[  1865.263] (II) event9  - (II) MSI WMI hotkeys: (II) device is a keyboard
[  1865.263] (II) systemd-logind: got resume for 13:68
[  1865.263] (II) event4  - (II) Power Button: (II) is tagged by udev as: Keyboard
[  1865.263] (II) event4  - (II) Power Button: (II) device is a keyboard
[  1869.088] (**) Option "fd" "50"
[  1869.088] (II) event4  - (II) Power Button: (II) device removed
[  1869.088] (**) Option "fd" "45"
[  1869.088] (II) event7  - (II) Video Bus: (II) device removed
[  1869.089] (**) Option "fd" "56"
[  1869.089] (II) event8  - (II) Video Bus: (II) device removed
[  1869.089] (**) Option "fd" "44"
[  1869.089] (II) event3  - (II) Power Button: (II) device removed
[  1869.089] (**) Option "fd" "46"
[  1869.089] (II) event2  - (II) Sleep Button: (II) device removed
[  1869.089] (**) Option "fd" "26"
[  1869.089] (II) event5  - (II) NEC HD WebCam: (II) device removed
[  1869.089] (**) Option "fd" "47"
[  1869.089] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[  1869.089] (**) Option "fd" "48"
[  1869.089] (II) event17 - (II) ETPS/2 Elantech Touchpad: (II) device removed
[  1869.090] (**) Option "fd" "49"
[  1869.090] (II) event9  - (II) MSI WMI hotkeys: (II) device removed
[  1869.381] (II) systemd-logind: got pause for 226:0
[  1869.381] (II) systemd-logind: got pause for 13:72
[  1869.381] (II) systemd-logind: got pause for 13:69
[  1869.381] (II) systemd-logind: got pause for 13:67
[  1869.381] (II) systemd-logind: got pause for 13:71
[  1869.381] (II) systemd-logind: got pause for 13:66
[  1869.381] (II) systemd-logind: got pause for 13:64
[  1869.381] (II) systemd-logind: got pause for 13:81
[  1869.381] (II) systemd-logind: got pause for 13:73
[  1869.381] (II) systemd-logind: got pause for 13:68

Last edited by yashtewari (2017-09-06 05:53:37)

Offline

#2 2017-09-05 11:35:13

Slithery
Administrator
From: Norfolk, UK
Registered: 2013-12-01
Posts: 5,776

Re: [SOLVED] X11: startx hangs the entire system

@yashtewari

Can you please post any code outputs/snippets in between [⁣code] [⁣/code] tags please, your post is almost unreadable.

No, it didn't "fix" anything. It just shifted the brokeness one space to the right. - jasonwryan
Closing -- for deletion; Banning -- for muppetry. - jasonwryan

aur - dotfiles

Offline

#3 2017-09-05 11:37:10

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,545
Website

Re: [SOLVED] X11: startx hangs the entire system

First, please edit your post to use code tags.

Next:

yashtewari wrote:

... all display-related programs (xrandr, xterm, startxfce4...) return errors like "Can't open display", "DISPLAY is not set" and so on

Where are you trying to run these from?  The first two you can only run from *within* a running X session (where DISPLAY would be set), the last you can only run from a tty.

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#4 2017-09-05 11:38:52

yashtewari
Member
Registered: 2017-09-03
Posts: 12

Re: [SOLVED] X11: startx hangs the entire system

Done formatting!
I was running all of them from a tty.

The bumblebee testing command

optirun glxgears -info

also complains about DISPLAY.

EDIT: I just ran these commands again to confirm, both 

 startxfce4

and 

optirun glxgears -info

hang the system, can't open other tty afterwards.

Last edited by yashtewari (2017-09-05 11:52:48)

Offline

#5 2017-09-05 11:47:26

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,545
Website

Re: [SOLVED] X11: startx hangs the entire system

yashtewari wrote:

I was running all of them from a tty

Then, with the exception of startxfce4, what you see is expected.  You cannot run Xorg programs outside Xorg.

I highly doubt that startxfce4 actually gave the same error message as the others.  If you want help starting XFCE, post the exact error output from that command.

"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#6 2017-09-05 11:54:40

fsckd
Forum Fellow
Registered: 2009-06-15
Posts: 4,173

Re: [SOLVED] X11: startx hangs the entire system

Not a Kernel & Hardware issue. Moving to Newbie Corner.

aur S & M :: forum rules :: Community Ethos
Resources for Women, POC, LGBT*, and allies

Offline

#7 2017-09-05 12:06:08

yashtewari
Member
Registered: 2017-09-03
Posts: 12

Re: [SOLVED] X11: startx hangs the entire system

Trilby wrote:

If you want help starting XFCE, post the exact error output from that command.

I want to just get a GUI up and running. startxfce4 gives output similar to startx (.xinitrc has xterm) and makes the system hang. Redirecting stdout/stderr to a file isn't working (the file doesn't end up being created) so I'm trying to capture the output somehow...

Offline

#8 2017-09-05 12:24:38

yashtewari
Member
Registered: 2017-09-03
Posts: 12

Re: [SOLVED] X11: startx hangs the entire system

Copied manually:

$ startx

X.Org X Server 1.19.3
Release Date: 2017-03-15
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.12.5-1-ARCH x86_64
Current Operating System: Linux archlinux 4.12.8-1-ARCH £1 SMP PREEMPT Thu Aug 17 08:37:20 CEST 2017 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID-dcb1e8e4-594a-47-ac-94-ef-7509dfd02806 rw quiet
Build Date: 13 August 2017 09:37:50PM

Current version of pixman: 0.34.0
Using system config directory "/usr/share/X11/xorg.conf.d"

I ran 

 pacman -Syu

and now on startup I get the error 

 premature end of file /boot//vmlinuz-linux

... so I'll try fixing that first

Offline

#9 2017-09-05 12:48:59

yashtewari
Member
Registered: 2017-09-03
Posts: 12

Re: [SOLVED] X11: startx hangs the entire system

Fixed the startup issue.

startx told me that logs would be written to $HOME/.local/share/xorg/Xorg.0.log, but the file present there is not updated (it's from the last time I successfully ran startx 3 days ago).

Any help is highly appreciated, if it doesn't work I'll try reinstalling from scratch...

Last edited by yashtewari (2017-09-05 12:52:08)

Offline

#10 2017-09-05 13:31:42

fsckd
Forum Fellow
Registered: 2009-06-15
Posts: 4,173

Re: [SOLVED] X11: startx hangs the entire system

How are you calling startx? Check /var/log/.

aur S & M :: forum rules :: Community Ethos
Resources for Women, POC, LGBT*, and allies

Offline

#11 2017-09-05 13:48:04

yashtewari
Member
Registered: 2017-09-03
Posts: 12

Re: [SOLVED] X11: startx hangs the entire system

Calling startx as a normal user, 

startx

, running as root results in the same thing.

/var/log also contains logs which are not recent, one of which is pasted in my initial post.

Offline

#12 2017-09-05 14:49:50

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,877

Re: [SOLVED] X11: startx hangs the entire system

First off, edit your OP - it's completely misleading.
Your problem is getting to a usable X11 session.

=> How did you configure bumblebee?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#13 2017-09-05 16:19:21

yashtewari
Member
Registered: 2017-09-03
Posts: 12

Re: [SOLVED] X11: startx hangs the entire system

Hi seth, I installed bumblebee, and ran 

optirun glxgears -info

which returned an error about not finding my NVIDIA driver, so I added 

BusID "PCI:01:00:0"

to /etc/bumblebee/xorg.conf.nvidia, and now running the optirun thing says 

Error: couldn't open display (null)

Again, startx with xterm was working (even before I installed bumblebee) until I installed xfce4.

Last edited by yashtewari (2017-09-05 17:50:02)

Offline

#14 2017-09-05 19:21:26

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,877

Re: [SOLVED] X11: startx hangs the entire system

That's not actually what I asked for, but since you suggest the issue is with xfce only...
I'm pretty sure it still works - xfce will probably attempt to setup a randr config that doesn't work (because there's no output attached to its configured output)

As pointed out several times before: if you run an X11 client outside an X11 session, you'll have to inform that client which X11 server to connect to.
run

export DISPLAY=:0
xrandr -q | tee randr.txt

If this gets you some useful output, post the content of randr.txt

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#15 2017-09-05 19:31:27

yashtewari
Member
Registered: 2017-09-03
Posts: 12

Re: [SOLVED] X11: startx hangs the entire system

Sorry I didn't understand your question; I posted what I understood from 'configuring bumblebee', could you please specify what exactly you're looking for? I just reiterated the xfce bit to make sure that it's understood the points at which things were working and not.

Running your command after setting the DISPLAY variable gives me "Can't open display :0" with an empty randr.txt file.

Offline

#16 2017-09-06 05:53:07

yashtewari
Member
Registered: 2017-09-03
Posts: 12

Re: [SOLVED] X11: startx hangs the entire system

Got X11 running by removing NVIDIA driver and bumblebee, as described in https://wiki.archlinux.org/index.php/NV … IA_Optimus

Offline

Pages: 1

Board footer

Powered by FluxBB