You are not logged in.

Pages: 1 2

#1 2017-09-30 09:42:52

vlogswawa
Member
Registered: 2017-09-29
Posts: 26

Can't use CTRL ALT F1...6 to switch TTY

I have a mbp late 2016, I have awesome WM. I can switch between tty only when I'm in console mode. When I start X server I'm no longer able to switch back to console.
The only way to do this is to plug external keyboard.
To summarize I can switch between TTY using macbook keyboard only if I'm in console mode. If I'm in X server I need to plug external one to switch tty.

Any idea?

Offline

#2 2017-09-30 18:14:30

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: Can't use CTRL ALT F1...6 to switch TTY

Video card? Driver? Xorg.log? Output of relevant keypresses in X and TTY?


Moving to NC...

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#3 2017-09-30 18:28:03

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 29,534
Website

Re: Can't use CTRL ALT F1...6 to switch TTY

vlogswawa wrote:

I have a mbp

Try the "command" key instead of control.  Macbook keyboards generally have those wired differently if you haven't already done some remapping to account for this.

Edit: or maybe it was that you need to hold command+opt+control then the F-key, there was something odd about their keyboards (it's been many years since I used one).

Last edited by Trilby (2017-09-30 18:29:57)

"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" -  Richard Stallman

Offline

#4 2017-10-02 08:38:16

vlogswawa
Member
Registered: 2017-09-29
Posts: 26

Re: Can't use CTRL ALT F1...6 to switch TTY

@Trilby I tried all these combinations, nothing works.


@jasonwryan

video card: amd radeon rx 460
driver: xf86-video-amdgpu

Xorg.log:

[   394.633] 
X.Org X Server 1.19.3
Release Date: 2017-03-15
[   394.633] X Protocol Version 11, Revision 0
[   394.633] Build Operating System: Linux 4.12.5-1-ARCH x86_64 
[   394.633] Current Operating System: Linux oden 4.12.13-1-ARCH #1 SMP PREEMPT Fri Sep 15 06:36:43 UTC 2017 x86_64
[   394.633] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=377d2574-b0ef-445b-b3bf-790751a4f04b rw quiet splash amdgpu.si_support=1 amdgpu.cik_support=1
[   394.633] Build Date: 13 August 2017  09:37:50PM
[   394.633]  
[   394.633] Current version of pixman: 0.34.0
[   394.633] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[   394.633] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   394.633] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 29 17:35:47 2017
[   394.633] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   394.633] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   394.633] (==) No Layout section.  Using the first Screen section.
[   394.633] (==) No screen section available. Using defaults.
[   394.633] (**) |-->Screen "Default Screen Section" (0)
[   394.633] (**) |   |-->Monitor "<default monitor>"
[   394.633] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[   394.633] (**) |   |-->Device "AMD"
[   394.633] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   394.633] (==) Automatically adding devices
[   394.633] (==) Automatically enabling devices
[   394.633] (==) Automatically adding GPU devices
[   394.633] (==) Automatically binding GPU devices
[   394.633] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   394.633] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   394.633] 	Entry deleted from font path.
[   394.633] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[   394.633] (==) ModulePath set to "/usr/lib/xorg/modules"
[   394.633] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   394.633] (II) Loader magic: 0x564ddf9c4d40
[   394.633] (II) Module ABI versions:
[   394.633] 	X.Org ANSI C Emulation: 0.4
[   394.633] 	X.Org Video Driver: 23.0
[   394.633] 	X.Org XInput driver : 24.1
[   394.633] 	X.Org Server Extension : 10.0
[   394.634] (++) using VT number 1

[   394.634] (--) controlling tty is VT number 1, auto-enabling KeepTty
[   394.635] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c5
[   394.636] (II) xfree86: Adding drm device (/dev/dri/card0)
[   394.636] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[   394.638] (--) PCI:*(0:1:0:0) 1002:67ef:106b:017a rev 199, Mem @ 0xb0000000/268435456, 0xc0000000/2097152, 0x82600000/262144, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[   394.638] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   394.639] (II) LoadModule: "glx"
[   394.639] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   394.639] (II) Module glx: vendor="X.Org Foundation"
[   394.639] 	compiled for 1.19.3, module version = 1.0.0
[   394.639] 	ABI class: X.Org Server Extension, version 10.0
[   394.639] (II) LoadModule: "amdgpu"
[   394.639] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[   394.640] (II) Module amdgpu: vendor="X.Org Foundation"
[   394.640] 	compiled for 1.19.3, module version = 1.4.0
[   394.640] 	Module class: X.Org Video Driver
[   394.640] 	ABI class: X.Org Video Driver, version 23.0
[   394.640] (II) AMDGPU: Driver for AMD Radeon:
	All GPUs supported by the amdgpu kernel driver
[   394.640] (II) [KMS] Kernel modesetting enabled.
[   394.640] (II) AMDGPU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   394.640] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[   394.640] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   394.640] (==) AMDGPU(0): Default visual is TrueColor
[   394.640] (==) AMDGPU(0): RGB weight 888
[   394.640] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[   394.640] (--) AMDGPU(0): Chipset: "AMD Radeon (TM) RX Graphics" (ChipID = 0x67ef)
[   394.640] (II) Loading sub module "fb"
[   394.640] (II) LoadModule: "fb"
[   394.640] (II) Loading /usr/lib/xorg/modules/libfb.so
[   394.640] (II) Module fb: vendor="X.Org Foundation"
[   394.640] 	compiled for 1.19.3, module version = 1.0.0
[   394.640] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   394.640] (II) Loading sub module "dri2"
[   394.640] (II) LoadModule: "dri2"
[   394.640] (II) Module "dri2" already built-in
[   394.681] (II) Loading sub module "glamoregl"
[   394.681] (II) LoadModule: "glamoregl"
[   394.681] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   394.681] (II) Module glamoregl: vendor="X.Org Foundation"
[   394.681] 	compiled for 1.19.3, module version = 1.0.0
[   394.681] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   394.681] (II) glamor: OpenGL accelerated X.org driver based.
[   394.684] (II) glamor: EGL version 1.5 (DRI2):
[   394.687] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[   394.687] (==) AMDGPU(0): TearFree property default: auto
[   394.687] (II) AMDGPU(0): KMS Pageflipping: enabled
[   394.691] (II) AMDGPU(0): Output eDP using monitor section <default monitor>
[   394.722] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[   394.752] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[   394.782] (II) AMDGPU(0): Output DisplayPort-2 has no monitor section
[   394.812] (II) AMDGPU(0): Output DisplayPort-3 has no monitor section
[   394.817] (II) AMDGPU(0): EDID for output eDP
[   394.817] (II) AMDGPU(0): Manufacturer: APP  Model: a031  Serial#: 0
[   394.817] (II) AMDGPU(0): Year: 2015  Week: 38
[   394.817] (II) AMDGPU(0): EDID Version: 1.4
[   394.817] (II) AMDGPU(0): Digital Display Input
[   394.817] (II) AMDGPU(0): 10 bits per channel
[   394.817] (II) AMDGPU(0): Digital interface is DisplayPort
[   394.817] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 33  vert.: 21
[   394.817] (II) AMDGPU(0): Gamma: 2.20
[   394.817] (II) AMDGPU(0): No DPMS capabilities specified
[   394.817] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 
[   394.817] (II) AMDGPU(0): First detailed timing is preferred mode
[   394.817] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[   394.817] (II) AMDGPU(0): redX: 0.680 redY: 0.320   greenX: 0.265 greenY: 0.690
[   394.817] (II) AMDGPU(0): blueX: 0.151 blueY: 0.053   whiteX: 0.312 whiteY: 0.329
[   394.817] (II) AMDGPU(0): Manufacturer's mask: 0
[   394.817] (II) AMDGPU(0): Supported detailed timing:
[   394.817] (II) AMDGPU(0): clock: 328.9 MHz   Image Size:  331 x 207 mm
[   394.817] (II) AMDGPU(0): h_active: 2880  h_sync: 2888  h_sync_end 2920 h_blank_end 2960 h_border: 0
[   394.817] (II) AMDGPU(0): v_active: 1800  v_sync: 1838  v_sync_end 1846 v_blanking: 1852 v_border: 0
[   394.817] (II) AMDGPU(0): Monitor name: Color LCD
[   394.817] (II) AMDGPU(0): EDID (in hex):
[   394.817] (II) AMDGPU(0): 	00ffffffffffff00061031a000000000
[   394.817] (II) AMDGPU(0): 	26190104b5211578020fe1ae5243b026
[   394.817] (II) AMDGPU(0): 	0d505400000001010101010101010101
[   394.817] (II) AMDGPU(0): 	0101010101017c804050b00834700820
[   394.817] (II) AMDGPU(0): 	68084bcf1000001a0000001000000000
[   394.817] (II) AMDGPU(0): 	00000000000000000000000000fc0043
[   394.817] (II) AMDGPU(0): 	6f6c6f72204c43440a20202000000010
[   394.817] (II) AMDGPU(0): 	00000000000000000000000000000070
[   394.817] (II) AMDGPU(0): Printing probed modes for output eDP
[   394.817] (II) AMDGPU(0): Modeline "2880x1800"x60.0  328.92  2880 2888 2920 2960  1800 1838 1846 1852 +hsync -vsync (111.1 kHz eP)
[   394.817] (II) AMDGPU(0): Modeline "1920x1200"x60.0  193.48  1920 2056 2256 2592  1200 1203 1209 1245 -hsync +vsync (74.6 kHz)
[   394.817] (II) AMDGPU(0): Modeline "1920x1080"x60.0  173.11  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz)
[   394.817] (II) AMDGPU(0): Modeline "1600x1200"x60.0  161.23  1600 1712 1880 2160  1200 1203 1207 1245 -hsync +vsync (74.6 kHz)
[   394.817] (II) AMDGPU(0): Modeline "1680x1050"x60.0  146.36  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[   394.817] (II) AMDGPU(0): Modeline "1400x1050"x60.0  121.79  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
[   394.817] (II) AMDGPU(0): Modeline "1280x1024"x59.9  109.10  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
[   394.817] (II) AMDGPU(0): Modeline "1440x900"x60.0  106.68  1440 1528 1672 1904  900 903 909 934 -hsync +vsync (56.0 kHz)
[   394.817] (II) AMDGPU(0): Modeline "1280x960"x60.0  101.34  1280 1360 1488 1696  960 963 967 996 -hsync +vsync (59.8 kHz)
[   394.817] (II) AMDGPU(0): Modeline "1280x854"x60.0   89.34  1280 1352 1480 1680  854 857 867 887 -hsync +vsync (53.2 kHz)
[   394.817] (II) AMDGPU(0): Modeline "1280x800"x60.0   83.71  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.8 kHz)
[   394.817] (II) AMDGPU(0): Modeline "1280x720"x60.0   74.65  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.9 kHz)
[   394.817] (II) AMDGPU(0): Modeline "1152x768"x59.9   71.95  1152 1216 1328 1504  768 771 781 798 -hsync +vsync (47.8 kHz)
[   394.817] (II) AMDGPU(0): Modeline "1024x768"x59.9   63.53  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[   394.817] (II) AMDGPU(0): Modeline "800x600"x60.0   38.31  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[   394.817] (II) AMDGPU(0): Modeline "848x480"x59.9   31.65  848 872 952 1056  480 483 493 500 -hsync +vsync (30.0 kHz)
[   394.817] (II) AMDGPU(0): Modeline "720x480"x59.9   26.85  720 744 808 896  480 483 493 500 -hsync +vsync (30.0 kHz)
[   394.817] (II) AMDGPU(0): Modeline "640x480"x59.9   23.98  640 664 720 800  480 483 487 500 -hsync +vsync (30.0 kHz)
[   394.848] (II) AMDGPU(0): EDID for output DisplayPort-0
[   394.878] (II) AMDGPU(0): EDID for output DisplayPort-1
[   394.908] (II) AMDGPU(0): EDID for output DisplayPort-2
[   394.938] (II) AMDGPU(0): EDID for output DisplayPort-3
[   394.938] (II) AMDGPU(0): Output eDP connected
[   394.938] (II) AMDGPU(0): Output DisplayPort-0 disconnected
[   394.938] (II) AMDGPU(0): Output DisplayPort-1 disconnected
[   394.938] (II) AMDGPU(0): Output DisplayPort-2 disconnected
[   394.938] (II) AMDGPU(0): Output DisplayPort-3 disconnected
[   394.938] (II) AMDGPU(0): Using exact sizes for initial modes
[   394.938] (II) AMDGPU(0): Output eDP using initial mode 2880x1800 +0+0
[   394.939] (II) AMDGPU(0): mem size init: gart size :bfe3e000 vram size: s:7e2ca000 visible:e2ca000
[   394.939] (==) AMDGPU(0): DPI set to (96, 96)
[   394.939] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[   394.939] (II) Loading sub module "ramdac"
[   394.939] (II) LoadModule: "ramdac"
[   394.939] (II) Module "ramdac" already built-in
[   394.939] (--) Depth 24 pixmap format is 32 bpp
[   394.939] (II) AMDGPU(0): [DRI2] Setup complete
[   394.939] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[   394.939] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
[   394.939] (II) AMDGPU(0): Front buffer pitch: 11776 bytes
[   394.939] (II) AMDGPU(0): SYNC extension fences enabled
[   394.939] (II) AMDGPU(0): Present extension enabled
[   394.939] (==) AMDGPU(0): DRI3 enabled
[   394.939] (==) AMDGPU(0): Backing store enabled
[   394.939] (II) AMDGPU(0): Direct rendering enabled
[   394.950] (II) AMDGPU(0): Use GLAMOR acceleration.
[   394.950] (II) AMDGPU(0): Acceleration enabled
[   394.950] (==) AMDGPU(0): DPMS enabled
[   394.950] (==) AMDGPU(0): Silken mouse enabled
[   394.950] (II) AMDGPU(0): Set up textured video (glamor)
[   394.950] (II) AMDGPU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   394.951] (WW) AMDGPU(0): Option "Backlight" is not used
[   394.951] (--) RandR disabled
[   394.960] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   394.960] (II) AIGLX: enabled GLX_ARB_create_context
[   394.960] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   394.960] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[   394.960] (II) AIGLX: enabled GLX_INTEL_swap_event
[   394.960] (II) AIGLX: enabled GLX_SGI_swap_control
[   394.960] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[   394.960] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[   394.960] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[   394.960] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   394.960] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[   394.962] (II) AIGLX: Loaded and initialized radeonsi
[   394.962] (II) GLX: Initialized DRI2 GL provider for screen 0
[   394.966] (II) AMDGPU(0): Setting screen physical size to 294 x 166
[   395.032] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   395.032] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   395.032] (II) LoadModule: "libinput"
[   395.032] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   395.033] (II) Module libinput: vendor="X.Org Foundation"
[   395.033] 	compiled for 1.19.3, module version = 0.26.0
[   395.033] 	Module class: X.Org XInput Driver
[   395.033] 	ABI class: X.Org XInput driver, version 24.1
[   395.033] (II) Using input driver 'libinput' for 'Power Button'
[   395.034] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 27 paused 0
[   395.034] (**) Power Button: always reports core events
[   395.034] (**) Option "Device" "/dev/input/event3"
[   395.034] (**) Option "_source" "server/udev"
[   395.034] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[   395.034] (II) event3  - (II) Power Button: (II) device is a keyboard
[   395.034] (II) event3  - (II) Power Button: (II) device removed
[   395.034] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[   395.034] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   395.034] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[   395.034] (II) event3  - (II) Power Button: (II) device is a keyboard
[   395.035] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[   395.035] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   395.035] (II) Using input driver 'libinput' for 'Video Bus'
[   395.035] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 30 paused 0
[   395.035] (**) Video Bus: always reports core events
[   395.035] (**) Option "Device" "/dev/input/event4"
[   395.035] (**) Option "_source" "server/udev"
[   395.035] (II) event4  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[   395.035] (II) event4  - (II) Video Bus: (II) device is a keyboard
[   395.035] (II) event4  - (II) Video Bus: (II) device removed
[   395.035] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4/event4"
[   395.035] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   395.035] (II) event4  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[   395.035] (II) event4  - (II) Video Bus: (II) device is a keyboard
[   395.036] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   395.036] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   395.036] (II) Using input driver 'libinput' for 'Power Button'
[   395.036] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 31 paused 0
[   395.036] (**) Power Button: always reports core events
[   395.036] (**) Option "Device" "/dev/input/event1"
[   395.036] (**) Option "_source" "server/udev"
[   395.036] (II) event1  - (II) Power Button: (II) is tagged by udev as: Keyboard
[   395.036] (II) event1  - (II) Power Button: (II) device is a keyboard
[   395.036] (II) event1  - (II) Power Button: (II) device removed
[   395.036] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[   395.036] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   395.036] (II) event1  - (II) Power Button: (II) is tagged by udev as: Keyboard
[   395.036] (II) event1  - (II) Power Button: (II) device is a keyboard
[   395.037] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[   395.037] (II) No input driver specified, ignoring this device.
[   395.037] (II) This device may have been added with another device file.
[   395.037] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[   395.037] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   395.037] (II) Using input driver 'libinput' for 'Sleep Button'
[   395.037] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 32 paused 0
[   395.037] (**) Sleep Button: always reports core events
[   395.037] (**) Option "Device" "/dev/input/event2"
[   395.037] (**) Option "_source" "server/udev"
[   395.037] (II) event2  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[   395.037] (II) event2  - (II) Sleep Button: (II) device is a keyboard
[   395.037] (II) event2  - (II) Sleep Button: (II) device removed
[   395.037] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[   395.037] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   395.038] (II) event2  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[   395.038] (II) event2  - (II) Sleep Button: (II) device is a keyboard
[   395.038] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event10)
[   395.038] (II) No input driver specified, ignoring this device.
[   395.038] (II) This device may have been added with another device file.
[   395.038] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event11)
[   395.038] (II) No input driver specified, ignoring this device.
[   395.038] (II) This device may have been added with another device file.
[   395.038] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event12)
[   395.038] (II) No input driver specified, ignoring this device.
[   395.038] (II) This device may have been added with another device file.
[   395.038] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event13)
[   395.038] (II) No input driver specified, ignoring this device.
[   395.038] (II) This device may have been added with another device file.
[   395.038] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event8)
[   395.038] (II) No input driver specified, ignoring this device.
[   395.038] (II) This device may have been added with another device file.
[   395.039] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event9)
[   395.039] (II) No input driver specified, ignoring this device.
[   395.039] (II) This device may have been added with another device file.
[   395.039] (II) config/udev: Adding input device Apple Inc. iBridge (/dev/input/event14)
[   395.039] (**) Apple Inc. iBridge: Applying InputClass "libinput keyboard catchall"
[   395.039] (II) Using input driver 'libinput' for 'Apple Inc. iBridge'
[   395.039] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 33 paused 0
[   395.039] (**) Apple Inc. iBridge: always reports core events
[   395.039] (**) Option "Device" "/dev/input/event14"
[   395.039] (**) Option "_source" "server/udev"
[   395.039] (II) event14 - (II) Apple Inc. iBridge: (II) is tagged by udev as: Keyboard
[   395.039] (II) event14 - (II) Apple Inc. iBridge: (II) device is a keyboard
[   395.039] (II) event14 - (II) Apple Inc. iBridge: (II) device removed
[   395.040] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:05AC:8600.0001/input/input15/event14"
[   395.040] (II) XINPUT: Adding extended input device "Apple Inc. iBridge" (type: KEYBOARD, id 10)
[   395.040] (II) event14 - (II) Apple Inc. iBridge: (II) is tagged by udev as: Keyboard
[   395.040] (II) event14 - (II) Apple Inc. iBridge: (II) device is a keyboard
[   395.040] (II) config/udev: Adding input device Apple SPI Keyboard (/dev/input/event6)
[   395.040] (**) Apple SPI Keyboard: Applying InputClass "libinput keyboard catchall"
[   395.040] (II) Using input driver 'libinput' for 'Apple SPI Keyboard'
[   395.040] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 34 paused 0
[   395.041] (**) Apple SPI Keyboard: always reports core events
[   395.041] (**) Option "Device" "/dev/input/event6"
[   395.041] (**) Option "_source" "server/udev"
[   395.041] (II) event6  - (II) Apple SPI Keyboard: (II) is tagged by udev as: Keyboard
[   395.041] (II) event6  - (II) Apple SPI Keyboard: (II) device is a keyboard
[   395.041] (II) event6  - (II) Apple SPI Keyboard: (II) device removed
[   395.041] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1e.3/pxa2xx-spi.5/spi_master/spi2/spi-APP000D:00/input/input6/event6"
[   395.041] (II) XINPUT: Adding extended input device "Apple SPI Keyboard" (type: KEYBOARD, id 11)
[   395.041] (II) event6  - (II) Apple SPI Keyboard: (II) is tagged by udev as: Keyboard
[   395.041] (II) event6  - (II) Apple SPI Keyboard: (II) device is a keyboard
[   395.041] (II) config/udev: Adding input device Apple SPI Touchpad (/dev/input/event7)
[   395.041] (**) Apple SPI Touchpad: Applying InputClass "libinput touchpad catchall"
[   395.041] (**) Apple SPI Touchpad: Applying InputClass "touchpad catchall"
[   395.041] (**) Apple SPI Touchpad: Applying InputClass "Default clickpad buttons"
[   395.041] (**) Apple SPI Touchpad: Applying InputClass "Disable clickpad buttons on Apple touchpads"
[   395.041] (**) Apple SPI Touchpad: Applying InputClass "touchpad"
[   395.041] (II) LoadModule: "synaptics"
[   395.041] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   395.041] (II) Module synaptics: vendor="X.Org Foundation"
[   395.041] 	compiled for 1.19.0, module version = 1.9.0
[   395.041] 	Module class: X.Org XInput Driver
[   395.041] 	ABI class: X.Org XInput driver, version 24.1
[   395.041] (II) Using input driver 'synaptics' for 'Apple SPI Touchpad'
[   395.042] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 35 paused 0
[   395.042] (**) Apple SPI Touchpad: always reports core events
[   395.042] (**) Option "Device" "/dev/input/event7"
[   395.042] (II) synaptics: Apple SPI Touchpad: found clickpad property
[   395.042] (--) synaptics: Apple SPI Touchpad: x-axis range -7456 - 7976 (res 96)
[   395.042] (--) synaptics: Apple SPI Touchpad: y-axis range -163 - 9283 (res 95)
[   395.042] (II) synaptics: Apple SPI Touchpad: device does not report pressure, will use touch data.
[   395.042] (II) synaptics: Apple SPI Touchpad: device does not report finger width.
[   395.042] (--) synaptics: Apple SPI Touchpad: buttons: left double triple
[   395.042] (--) synaptics: Apple SPI Touchpad: Vendor 0 Product 0
[   395.042] (--) synaptics: Apple SPI Touchpad: invalid pressure range.  defaulting to 0 - 255
[   395.042] (--) synaptics: Apple SPI Touchpad: invalid finger width range.  defaulting to 0 - 15
[   395.042] (**) Option "FingerLow" "30"
[   395.042] (**) Option "FingerHigh" "50"
[   395.042] (**) Option "MaxTapTime" "125"
[   395.042] (**) Option "EmulateTwoFingerMinZ" "40"
[   395.042] (**) Option "EmulateTwoFingerMinW" "8"
[   395.042] (**) Option "VertEdgeScroll" "on"
[   395.042] (**) Option "HorizEdgeScroll" "on"
[   395.042] (**) Option "VertTwoFingerScroll" "on"
[   395.042] (**) Option "HorizTwoFingerScroll" "on"
[   395.042] (**) Option "TapButton1" "1"
[   395.042] (**) Option "TapButton2" "3"
[   395.042] (**) Option "TapButton3" "2"
[   395.042] (**) Option "CircularScrolling" "on"
[   395.042] (**) Option "CircScrollTrigger" "2"
[   395.042] (**) Option "CoastingSpeed" "0"
[   395.042] (**) Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
[   395.042] (--) synaptics: Apple SPI Touchpad: touchpad found
[   395.042] (**) Apple SPI Touchpad: always reports core events
[   395.042] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1e.3/pxa2xx-spi.5/spi_master/spi2/spi-APP000D:00/input/input7/event7"
[   395.042] (II) XINPUT: Adding extended input device "Apple SPI Touchpad" (type: TOUCHPAD, id 12)
[   395.042] (**) synaptics: Apple SPI Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[   395.042] (**) synaptics: Apple SPI Touchpad: (accel) MaxSpeed is now 1.75
[   395.042] (**) synaptics: Apple SPI Touchpad: (accel) AccelFactor is now 0.011
[   395.042] (**) Apple SPI Touchpad: (accel) keeping acceleration scheme 1
[   395.042] (**) Apple SPI Touchpad: (accel) acceleration profile 1
[   395.042] (**) Apple SPI Touchpad: (accel) acceleration factor: 2.000
[   395.042] (**) Apple SPI Touchpad: (accel) acceleration threshold: 4
[   395.042] (--) synaptics: Apple SPI Touchpad: touchpad found
[   395.042] (II) config/udev: Adding input device Apple SPI Touchpad (/dev/input/mouse0)
[   395.042] (**) Apple SPI Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[   395.042] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[   395.042] (II) No input driver specified, ignoring this device.
[   395.042] (II) This device may have been added with another device file.
[   407.127] (**) Option "fd" "27"
[   407.127] (II) event3  - (II) Power Button: (II) device removed
[   407.127] (**) Option "fd" "30"
[   407.127] (II) event4  - (II) Video Bus: (II) device removed
[   407.127] (**) Option "fd" "31"
[   407.127] (II) event1  - (II) Power Button: (II) device removed
[   407.127] (**) Option "fd" "32"
[   407.127] (II) event2  - (II) Sleep Button: (II) device removed
[   407.127] (**) Option "fd" "33"
[   407.127] (II) event14 - (II) Apple Inc. iBridge: (II) device removed
[   407.127] (**) Option "fd" "34"
[   407.127] (II) event6  - (II) Apple SPI Keyboard: (II) device removed
[   407.128] (II) UnloadModule: "synaptics"
[   407.128] (II) systemd-logind: releasing fd for 13:71
[   407.186] (II) UnloadModule: "libinput"
[   407.186] (II) systemd-logind: releasing fd for 13:70
[   407.223] (II) UnloadModule: "libinput"
[   407.223] (II) systemd-logind: releasing fd for 13:78
[   407.243] (II) UnloadModule: "libinput"
[   407.243] (II) systemd-logind: releasing fd for 13:66
[   407.263] (II) UnloadModule: "libinput"
[   407.263] (II) systemd-logind: releasing fd for 13:65
[   407.283] (II) UnloadModule: "libinput"
[   407.283] (II) systemd-logind: releasing fd for 13:68
[   407.323] (II) UnloadModule: "libinput"
[   407.323] (II) systemd-logind: releasing fd for 13:67
[   407.374] (II) Server terminated successfully (0). Closing log file.

Last edited by vlogswawa (2017-10-02 08:40:47)

Offline

#5 2017-10-02 09:31:57

seth
Member
Registered: 2012-09-03
Posts: 51,286

Re: Can't use CTRL ALT F1...6 to switch TTY

Does chvt still work?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#6 2017-10-02 09:57:58

vlogswawa
Member
Registered: 2017-09-29
Posts: 26

Re: Can't use CTRL ALT F1...6 to switch TTY

@seth Yes it  does work with sudo.
I believe the problem comes from Xorg. i can switch tty in console mode.
by the way, my mbp has touch bar, and this is the  driver i'm using for the keyboard: https://gist.github.com/roadrunner2/128 … c6a92f9cd7

Offline

#7 2017-10-02 11:20:10

seth
Member
Registered: 2012-09-03
Posts: 51,286

Re: Can't use CTRL ALT F1...6 to switch TTY

I'd confidently blame that kernel module (since this is an input related issue and the ctrl+alt+F<x> shortcuts are handled by the kernel, not X11)
=> can you try w/o so we can isolate the bug?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#8 2017-10-02 12:11:41

vlogswawa
Member
Registered: 2017-09-29
Posts: 26

Re: Can't use CTRL ALT F1...6 to switch TTY

I just did what u asked! correct me if i'm wrong:


rmmod intel_lpss_pci spi_pxa2xx_platform applespi appletb

results: the keyboard is no longer working.

I had to plug external one and load those modules and reboot.

Offline

#9 2017-10-02 12:15:54

seth
Member
Registered: 2012-09-03
Posts: 51,286

Re: Can't use CTRL ALT F1...6 to switch TTY

idk whether that keyboard can be driven with the stock kernel modules, but just removing the used one at runtime is no good idea ;-)
Try blacklisting them (at the grub commandline) - https://wiki.archlinux.org/index.php/Ke … and_line_2

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#10 2017-10-02 13:03:39

vlogswawa
Member
Registered: 2017-09-29
Posts: 26

Re: Can't use CTRL ALT F1...6 to switch TTY

no it can't be driven by the stock kernel modules, you can check here https://wiki.archlinux.org/index.php/ma … sion_9.2C1
if it was related to that kernel module, why would i be able to use ctrl+alt+f<x> when i'm in console mode?

Offline

#11 2017-10-02 13:38:05

seth
Member
Registered: 2012-09-03
Posts: 51,286

Re: Can't use CTRL ALT F1...6 to switch TTY

Wild guess is that the module completely hands the keyboard to the X11 driver - notably for the touchbar.
As a workaround, assign awesome shortcuts to ctrl+alt+f<x> to chvt <x> ?

(You could suid chvt or visudo yourself permissions to invoke it pw-less or use pkexec and a polkit rule for the active user)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#12 2017-10-02 14:42:40

vlogswawa
Member
Registered: 2017-09-29
Posts: 26

Re: Can't use CTRL ALT F1...6 to switch TTY

I just did what you said! i visudo myself .... it works but! all keys combination except ctrl+alt+f<x>!! i could use ctrl+alt+1 it work ctrl+alt+whatever but not f<x>.
i tought it's f<x> problem, so i tried these combinations alt+F<x> or ctl+F<x> and they worked!! what does it mean. so my conclusion is there must be something wrong with ctrl+alt+f<n> while i'm in X11.

Offline

#13 2017-10-02 14:49:12

vlogswawa
Member
Registered: 2017-09-29
Posts: 26

Re: Can't use CTRL ALT F1...6 to switch TTY

Actually using awesome to switch tty is really not the solution i'm looking for. sometimes awesome wm could freeze, and with this workaround solution i can do nothing just to force computer to turn off

Offline

#14 2017-10-02 16:46:40

vlogswawa
Member
Registered: 2017-09-29
Posts: 26

Re: Can't use CTRL ALT F1...6 to switch TTY

here is xev's output for both mbp keyboard and external one:

macbook:

KeyPress event, serial 34, synthetic NO, window 0x1800001,
    root 0x4a6, subw 0x0, time 16269402, (569,956), root:(569,956),
    state 0x0, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
    XLookupString gives 0 bytes: 
    XmbLookupString gives 0 bytes: 
    XFilterEvent returns: False

KeyPress event, serial 34, synthetic NO, window 0x1800001,
    root 0x4a6, subw 0x0, time 16269612, (569,956), root:(569,956),
    state 0x4, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES,
    XLookupString gives 0 bytes: 
    XmbLookupString gives 0 bytes: 
    XFilterEvent returns: False

MappingNotify event, serial 34, synthetic NO, window 0x0,
    request MappingKeyboard, first_keycode 8, count 248

KeyRelease event, serial 35, synthetic NO, window 0x1800001,
    root 0x4a6, subw 0x0, time 16270003, (569,956), root:(569,956),
    state 0xc, keycode 67 (keysym 0x1008fe01, XF86Switch_VT_1), same_screen YES,
    XLookupString gives 0 bytes: 
    XFilterEvent returns: False

external:

KeyPress event, serial 31, synthetic NO, window 0x1800001,
    root 0x4a6, subw 0x0, time 16281475, (569,956), root:(569,956),
    state 0x0, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
    XLookupString gives 0 bytes: 
    XmbLookupString gives 0 bytes: 
    XFilterEvent returns: False

KeyPress event, serial 34, synthetic NO, window 0x1800001,
    root 0x4a6, subw 0x0, time 16281683, (569,956), root:(569,956),
    state 0x4, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES,
    XLookupString gives 0 bytes: 
    XmbLookupString gives 0 bytes: 
    XFilterEvent returns: False

KeyRelease event, serial 34, synthetic NO, window 0x1800001,
    root 0x4a6, subw 0x0, time 16282131, (569,956), root:(569,956),
    state 0xc, keycode 67 (keysym 0x1008fe01, XF86Switch_VT_1), same_screen YES,
    XLookupString gives 0 bytes: 
    XFilterEvent returns: False

what this one means:

MappingNotify event, serial 34, synthetic NO, window 0x0,
    request MappingKeyboard, first_keycode 8, count 248

Last edited by vlogswawa (2017-10-02 16:47:54)

Offline

#15 2017-10-02 18:12:37

seth
Member
Registered: 2012-09-03
Posts: 51,286

Re: Can't use CTRL ALT F1...6 to switch TTY

Means the input focus goes nowhere (because of the successful VT switch)
The VT switching is a kernel feature, nothing in X11 should be able to intercept it.

Since you (expectably) do not receive the press event in X11, the problem is not a hand-over, but simply a "nobody cares".
Since the external keyboard works, we can assume it's the touchbar module - you should file a bug upstream.

What you might try in addition is to disable the touchbar in X11 using xinput (but that only works if it's registered as additional keyboard and isn't a practical solution either) and to see whether using evdev instead of libinput (as keayboard driver) makes a difference.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#16 2017-10-03 15:00:56

vlogswawa
Member
Registered: 2017-09-29
Posts: 26

Re: Can't use CTRL ALT F1...6 to switch TTY

the F<n> buttons are displayed on the touchbar. disabling the touchbar means no more F<n> buttons;

actually Xorg can block tty access by adding this to xorg.cong

Section "ServerFlags"
    Option "DontVTSwitch" "True"
EndSection

source : https://wiki.archlinux.org/index.php/xo … TTY_access

Last edited by vlogswawa (2017-10-03 15:01:24)

Offline

#17 2017-10-03 15:07:35

seth
Member
Registered: 2012-09-03
Posts: 51,286

Re: Can't use CTRL ALT F1...6 to switch TTY

Yes, but didn't put that there and forgot about it, did you? (The X11 server itself can prevent this, but no client should be able to do this - afaik not even runtime configure the server itr.)

The idea is to disable the touchbar in X11 (hoping the kernel will take back full control)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#18 2017-10-03 15:09:52

vlogswawa
Member
Registered: 2017-09-29
Posts: 26

Re: Can't use CTRL ALT F1...6 to switch TTY

no i don't have this on my xorg.conf.
how can i disable touchbar in X11?

Offline

#19 2017-10-03 15:12:18

seth
Member
Registered: 2012-09-03
Posts: 51,286

Re: Can't use CTRL ALT F1...6 to switch TTY

first check "xinput" on whether that's a keyboard of its own and then use "xinput disable <id>"

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#20 2017-10-03 15:28:26

vlogswawa
Member
Registered: 2017-09-29
Posts: 26

Re: Can't use CTRL ALT F1...6 to switch TTY

i just did that, no succes.

the touchbar is still on, i still can see f<n>.. but it is really disabled, for example if i'm in chrome and press f5 to reload it won't work.

Offline

#21 2017-10-03 15:30:39

seth
Member
Registered: 2012-09-03
Posts: 51,286

Re: Can't use CTRL ALT F1...6 to switch TTY

That's expectable - the only question is whether ctrl+alt+F<x> switches the VT (but as mentioned, that's hardly a practical "solution" either)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#22 2017-10-03 15:37:29

vlogswawa
Member
Registered: 2017-09-29
Posts: 26

Re: Can't use CTRL ALT F1...6 to switch TTY

maybe this has something to do with this problem

[   394.633] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 29 17:35:47 2017
[   394.634] (--) controlling tty is VT number 1, auto-enabling KeepTty

this is in my xorg.log

Offline

#23 2017-10-03 15:45:36

seth
Member
Registered: 2012-09-03
Posts: 51,286

Re: Can't use CTRL ALT F1...6 to switch TTY

man 1 Xorg | grep -A2 keeptty

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Online

#24 2017-10-03 15:53:41

vlogswawa
Member
Registered: 2017-09-29
Posts: 26

Re: Can't use CTRL ALT F1...6 to switch TTY

Okay, i'll keep you updated if i manage to solve this problem

Offline

#25 2017-10-03 16:48:02

vlogswawa
Member
Registered: 2017-09-29
Posts: 26

Re: Can't use CTRL ALT F1...6 to switch TTY

here is what i found so far:

$ xmodmap -e "keycode 68 = XF86Switch_VT_2"


after this command, i can swich tp tty2 by pressing f2

but still i want to use ctl+alt combination to do so

Offline

Pages: 1 2

Board footer

Powered by FluxBB