Arch Linux

Wmog

Member

Registered: 2017-09-13

Posts: 25

SNMP no longer detects my printer

Hey,

I have an HP printer connected to my network. On my ArchLinux system I installed the hplip-3.17.9 driver and then, following https://wiki.archlinux.org/index.php/CUPS#CLI_tools, to declare my printer within my system I ran:

/usr/lib/cups/backend/snmp ip_address

It displayed my printer and its features. However some times later, when I ran again this command SNMP no longer detect my printer although nothing has changed. By executing:

lpinfo -v

it seems that the printer is detected as follows:

network dnssd://HP%20LaserJet%20P2055dn%20%5BBB0E35%5D._pdl-datastream._tcp.local/

and it is the same with Avahi:

+ enp2s0 IPv6 HP LaserJet P2055dn [BB0E35]                  Telnet Remote Terminal local
+ enp2s0 IPv4 HP LaserJet P2055dn [BB0E35]                  Telnet Remote Terminal local

...

+ enp2s0 IPv6 HP LaserJet P2055dn [BB0E35]                  Web Site             local

...

+ enp2s0 IPv4 HP LaserJet P2055dn [BB0E35]                  Web Site             local
+ enp2s0 IPv6 HP LaserJet P2055dn [BB0E35]                  PDL Printer          local
+ enp2s0 IPv4 HP LaserJet P2055dn [BB0E35]                  PDL Printer          local
+ enp2s0 IPv6 HP LaserJet P2055dn [BB0E35]                  UNIX Printer         local
+ enp2s0 IPv4 HP LaserJet P2055dn [BB0E35]                  UNIX Printer         local

...

= enp2s0 IPv4 HP LaserJet P2055dn [BB0E35]                  UNIX Printer         local
   hostname = [NPIBB0E35.local]
   address = [192.168.1.30]
   port = [515]
   txt = ["Binary=T" "Transparent=T" "adminurl=http://NPIBB0E35.local." "priority=30" "product=(HP LaserJet P2055dn)" "ty=HP LaserJet P2055dn" "pdl=application/postscript" "rp=BINPS" "qtotal=4" "txtvers=1"]
= enp2s0 IPv4 HP LaserJet P2055dn [BB0E35]                  PDL Printer          local
   hostname = [NPIBB0E35.local]
   address = [192.168.1.30]
   port = [9100]
   txt = ["adminurl=http://NPIBB0E35.local." "priority=40" "product=(HP LaserJet P2055dn)" "ty=HP LaserJet P2055dn" "pdl=application/postscript,application/vnd.hp-PCL,application/vnd.hp-PCLXL" "qtotal=1" "txtvers=1"]
= enp2s0 IPv4 HP LaserJet P2055dn [BB0E35]                  Web Site             local
   hostname = [NPIBB0E35.local]
   address = [192.168.1.30]
   port = [80]
   txt = []
= enp2s0 IPv4 HP LaserJet P2055dn [BB0E35]                  Telnet Remote Terminal local
   hostname = [NPIBB0E35.local]
   address = [192.168.1.30]
   port = [23]
   txt = []
= enp2s0 IPv6 HP LaserJet P2055dn [BB0E35]                  UNIX Printer         local
   hostname = [NPIBB0E35.local]
   address = [192.168.1.30]
   port = [515]
   txt = ["Binary=T" "Transparent=T" "adminurl=http://NPIBB0E35.local." "priority=30" "product=(HP LaserJet P2055dn)" "ty=HP LaserJet P2055dn" "pdl=application/postscript" "rp=BINPS" "qtotal=4" "txtvers=1"]
= enp2s0 IPv6 HP LaserJet P2055dn [BB0E35]                  PDL Printer          local
   hostname = [NPIBB0E35.local]
   address = [192.168.1.30]
   port = [9100]
   txt = ["adminurl=http://NPIBB0E35.local." "priority=40" "product=(HP LaserJet P2055dn)" "ty=HP LaserJet P2055dn" "pdl=application/postscript,application/vnd.hp-PCL,application/vnd.hp-PCLXL" "qtotal=1" "txtvers=1"]
= enp2s0 IPv6 HP LaserJet P2055dn [BB0E35]                  Web Site             local
   hostname = [NPIBB0E35.local]
   address = [192.168.1.30]
   port = [80]
   txt = []
= enp2s0 IPv6 HP LaserJet P2055dn [BB0E35]                  Telnet Remote Terminal local
   hostname = [NPIBB0E35.local]
   address = [192.168.1.30]
   port = [23]
   txt = []

Could you help me to solve this problem please in order to set a queue name then to declare my printer to my system.

Thank you in advance,

Have a nice day

Last edited by Wmog (2017-10-06 11:56:05)