[solved] GPU exception with Nvidia driver

nourathar · 2017-10-30 10:03:54

Hello,

on my computer back home (I'm writing this from work) I recently did a fresh Arch install, and all was fine.
A week or so ago I installed some extra packages (midori and some dependencies), and after a while I realized that running midori would cause GPU glitches, unresponsiveness and sometimes even a system crash (which is something I realized I totally forgot about since switching to Arch 5 years ago). Deinstalling midori and its dependencies took care of that. A few days ago I tried again, could not figure out what caused these glitches, and deinstalled these packages again.

But now X will not start anymore and tells me the NVIDIA driver reported a GPU error.

I am not using GRUB: my BIOS loads EFI and the kernel directly and that has worked fine for a few weeks.
In the console I login and start X manually by typing 'startx'. Normally I am using the i3 window manager, but I think this error happens before we get to that point.

The driver I am using is the one in the standard nvidia package, and I have been using that one for ages on this computer. The card is Geforce GTX 580. lspci correctly reports my graphics card and tells me it is using the NVIDIA driver. I am using the current version, which is 387.12-2.

I have deleted my xorg.conf, tried without it and tried with a new one generated by nvidia-xconfig.
I deleted the file generated by nvidia-settings, reading it could be corrupt and cause problems.
Just in case I have tried without starting i3 in my .xinitrc, but the problem is not there..
My xorg.conf and xorg.conf.d is pretty much empty; very few things relate to the display and the GPU there.

One possibillity could be that my nvidia card died on me, but the fans spin merrily, the card is correctly reported by lspci and I strongly suspect it is a configuration or driver issue.
Are there other things I should look into ? What am I missing ?

SInce it is a rather fresh install I am not sure I can easily downgrade the nvidia driver to the previous version, but that is what I will try tonight.

Last edited by nourathar (2017-11-04 20:21:04)

nourathar · 2017-10-31 11:07:25

The last 24 hours brought two updates of the Nvidia driver, but they did not solve my problem and I still have GPU crashes.
Downgrading nvidia resulted in errors about the nvidia kernel module not being loaded, also when I downgraded the kernel to an earlier version as well.

Here the Xorg log of the crash with the very latest nvidia driver:

[     8.628] 
X.Org X Server 1.19.5
Release Date: 2017-10-12
[     8.628] X Protocol Version 11, Revision 0
[     8.628] Build Operating System: Linux 4.9.54-1-lts x86_64 
[     8.628] Current Operating System: Linux box 4.13.9-1-ARCH #1 SMP PREEMPT Sun Oct 22 09:07:32 CEST 2017 x86_64
[     8.628] Kernel command line: root=/dev/sdb3 rw initrd=/intel-ucode.img initrd=/initramfs-linux.img fbcon=rotate:3
[     8.628] Build Date: 12 October 2017  09:59:53PM
[     8.628]  
[     8.628] Current version of pixman: 0.34.0
[     8.628] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     8.628] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     8.628] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 31 11:50:29 2017
[     8.629] (==) Using config file: "/etc/X11/xorg.conf"
[     8.629] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     8.630] (==) ServerLayout "Layout0"
[     8.630] (**) |-->Screen "Screen0" (0)
[     8.630] (**) |   |-->Monitor "Monitor0"
[     8.630] (**) |   |-->Device "Device0"
[     8.630] (**) |-->Input Device "Keyboard0"
[     8.630] (**) |-->Input Device "Mouse0"
[     8.630] (==) Automatically adding devices
[     8.630] (==) Automatically enabling devices
[     8.630] (==) Automatically adding GPU devices
[     8.630] (==) Automatically binding GPU devices
[     8.630] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     8.633] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[     8.633] 	Entry deleted from font path.
[     8.633] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[     8.633] 	Entry deleted from font path.
[     8.633] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[     8.633] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[     8.633] 	Entry deleted from font path.
[     8.633] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[     8.633] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[     8.633] (==) ModulePath set to "/usr/lib/xorg/modules"
[     8.633] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[     8.633] (WW) Disabling Keyboard0
[     8.633] (WW) Disabling Mouse0
[     8.633] (II) Loader magic: 0x55ac3944cd60
[     8.633] (II) Module ABI versions:
[     8.633] 	X.Org ANSI C Emulation: 0.4
[     8.633] 	X.Org Video Driver: 23.0
[     8.633] 	X.Org XInput driver : 24.1
[     8.633] 	X.Org Server Extension : 10.0
[     8.634] (++) using VT number 1

[     8.634] (--) controlling tty is VT number 1, auto-enabling KeepTty
[     8.636] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[     8.636] (II) xfree86: Adding drm device (/dev/dri/card0)
[     8.637] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[     8.637] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules"
[     8.637] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[     8.638] (--) PCI:*(0:1:0:0) 10de:1080:19da:2203 rev 161, Mem @ 0xfa000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[     8.638] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     8.638] (II) LoadModule: "glx"
[     8.638] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[     8.692] (II) Module glx: vendor="NVIDIA Corporation"
[     8.692] 	compiled for 4.0.2, module version = 1.0.0
[     8.692] 	Module class: X.Org Server Extension
[     8.692] (II) NVIDIA GLX Module  387.22  Wed Oct 25 22:41:23 PDT 2017
[     8.693] (II) LoadModule: "nvidia"
[     8.695] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     8.701] (II) Module nvidia: vendor="NVIDIA Corporation"
[     8.701] 	compiled for 4.0.2, module version = 1.0.0
[     8.701] 	Module class: X.Org Video Driver
[     8.702] (II) NVIDIA dlloader X Driver  387.22  Wed Oct 25 22:14:47 PDT 2017
[     8.702] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     8.702] (II) systemd-logind: releasing fd for 226:0
[     8.704] (II) Loading sub module "fb"
[     8.704] (II) LoadModule: "fb"
[     8.704] (II) Loading /usr/lib/xorg/modules/libfb.so
[     8.705] (II) Module fb: vendor="X.Org Foundation"
[     8.705] 	compiled for 1.19.5, module version = 1.0.0
[     8.705] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     8.705] (II) Loading sub module "wfb"
[     8.705] (II) LoadModule: "wfb"
[     8.705] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     8.706] (II) Module wfb: vendor="X.Org Foundation"
[     8.706] 	compiled for 1.19.5, module version = 1.0.0
[     8.706] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     8.706] (II) Loading sub module "ramdac"
[     8.706] (II) LoadModule: "ramdac"
[     8.706] (II) Module "ramdac" already built-in
[     8.709] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[     8.709] (==) NVIDIA(0): RGB weight 888
[     8.709] (==) NVIDIA(0): Default visual is TrueColor
[     8.709] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     8.709] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[     8.709] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[     8.709] (**) NVIDIA(0): Enabling 2D acceleration
[     9.597] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[     9.597] (--) NVIDIA(0):     CRT-0
[     9.597] (--) NVIDIA(0):     CRT-1
[     9.597] (--) NVIDIA(0):     DFP-0 (boot)
[     9.597] (--) NVIDIA(0):     DFP-1
[     9.597] (--) NVIDIA(0):     DFP-2
[     9.598] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 580 (GF110) at PCI:1:0:0 (GPU-0)
[     9.598] (--) NVIDIA(0): Memory: 3145728 kBytes
[     9.598] (--) NVIDIA(0): VideoBIOS: 70.10.48.00.01
[     9.598] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     9.605] (--) NVIDIA(GPU-0): CRT-0: disconnected
[     9.605] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[     9.605] (--) NVIDIA(GPU-0): 
[     9.607] (--) NVIDIA(GPU-0): CRT-1: disconnected
[     9.607] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[     9.607] (--) NVIDIA(GPU-0): 
[     9.620] (--) NVIDIA(GPU-0): Eizo S2243W (DFP-0): connected
[     9.620] (--) NVIDIA(GPU-0): Eizo S2243W (DFP-0): Internal TMDS
[     9.620] (--) NVIDIA(GPU-0): Eizo S2243W (DFP-0): 330.0 MHz maximum pixel clock
[     9.620] (--) NVIDIA(GPU-0): 
[     9.620] (--) NVIDIA(GPU-0): DFP-1: disconnected
[     9.620] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[     9.620] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[     9.620] (--) NVIDIA(GPU-0): 
[     9.622] (--) NVIDIA(GPU-0): DFP-2: disconnected
[     9.622] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[     9.622] (--) NVIDIA(GPU-0): DFP-2: 330.0 MHz maximum pixel clock
[     9.622] (--) NVIDIA(GPU-0): 
[     9.623] (==) NVIDIA(0): 
[     9.623] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[     9.623] (==) NVIDIA(0):     will be used as the requested mode.
[     9.623] (==) NVIDIA(0): 
[     9.624] (II) NVIDIA(0): Validated MetaModes:
[     9.624] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[     9.624] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
[     9.629] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[     9.629] (--) NVIDIA(0):     option
[     9.629] (--) Depth 24 pixmap format is 32 bpp
[     9.629] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[     9.629] (II) NVIDIA:     access.
[     9.639] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[     9.639] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[     9.639] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[     9.639] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[     9.639] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[     9.639] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[     9.639] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[     9.639] (II) NVIDIA(0):     Config Options in the README.
[     9.646] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[     9.688] (==) NVIDIA(0): Disabling shared memory pixmaps
[     9.688] (==) NVIDIA(0): Backing store enabled
[     9.688] (==) NVIDIA(0): Silken mouse enabled
[     9.689] (**) NVIDIA(0): DPMS enabled
[     9.690] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[     9.690] (II) Loading sub module "dri2"
[     9.690] (II) LoadModule: "dri2"
[     9.690] (II) Module "dri2" already built-in
[     9.690] (II) NVIDIA(0): [DRI2] Setup complete
[     9.690] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     9.690] (--) RandR disabled
[     9.692] (II) Initializing extension GLX
[     9.692] (II) Indirect GLX disabled.
[     9.693] (EE) 
Fatal server error:
[     9.693] (EE) NVIDIA: A GPU exception occurred during X server initialization(EE) 
[     9.693] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[     9.693] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[     9.693] (EE) 
[     9.717] (EE) 
FatalError re-entered, aborting
[     9.717] (EE) NVIDIA: A GPU exception occurred during X server initialization(EE)

and here the output of

dmesg | grep nvidia

[    3.051292] nvidia: loading out-of-tree module taints kernel.
[    3.051300] nvidia: module license 'NVIDIA' taints kernel.
[    3.058407] nvidia-nvlink: Nvlink Core is being initialized, major device number 244
[    3.058565] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    3.064208] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  387.22  Wed Oct 25 22:46:40 PDT 2017
[    3.065188] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    3.065189] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[    9.557156] nvidia-modeset: Allocated GPU:0 (GPU-fd5873b2-5244-db06-cb37-41c60eb658a1) @ PCI:0000:01:00.0
[    9.923954] nvidia-modeset: Freed GPU:0 (GPU-fd5873b2-5244-db06-cb37-41c60eb658a1) @ PCI:0000:01:00.0

I must be looking in the wrong place, but I don't seem to see something out of the ordinary ?

Last edited by nourathar (2017-10-31 11:09:25)

WorMzy · 2017-10-31 12:03:49

There is an existing thread about this problem, please continue there.

Closing, for deletion.

Edit: this thread predates the problem I was referring to. Mod mode Abort.

@OP: are you using testing?

Last edited by WorMzy (2017-10-31 12:06:10)

nourathar · 2017-10-31 12:07:54

no, I am not using testing...

and apologies for spamming my own thread : I just found out how to unblacklist nouveau, and starting up with nouveau (just the console) reports GPU errors as well:

here the output of dmesg | grep nouveau

[    2.799199] fb: switching to nouveaufb from EFI VGA
[    2.799308] nouveau 0000:01:00.0: NVIDIA GF110 (0c8000a1)
[    2.955475] nouveau 0000:01:00.0: bios: version 70.10.48.00.01
[    2.978284] nouveau 0000:01:00.0: fb: 3072 MiB GDDR5
[    3.035097] nouveau 0000:01:00.0: DRM: VRAM: 3072 MiB
[    3.035098] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    3.035100] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    3.035101] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    3.035102] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000000
[    3.035103] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030
[    3.035103] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011380 00000000
[    3.035104] nouveau 0000:01:00.0: DRM: DCB outp 03: 08011382 00020030
[    3.035105] nouveau 0000:01:00.0: DRM: DCB outp 04: 02022362 00020010
[    3.035105] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[    3.035106] nouveau 0000:01:00.0: DRM: DCB conn 01: 00010130
[    3.035107] nouveau 0000:01:00.0: DRM: DCB conn 02: 00002261
[    3.121394] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[    3.312273] nouveau 0000:01:00.0: DRM: allocated 1920x1200 fb: 0x60000, bo ffff912384a8c800
[    3.312331] nouveau 0000:01:00.0: fifo: read fault at 0000985000 engine 00 [PGRAPH] client 05 [CTXCTL] reason 02 [PAGE_NOT_PRESENT] on channel 1 [00bfb6f000 DRM]
[    3.312336] nouveau 0000:01:00.0: fifo: gr engine fault on channel 1, recovering...
[    3.313839] fbcon: nouveaufb (fb0) is primary device
[    3.355982] nouveau 0000:01:00.0: DRM: channel 1 killed!
[    3.819570] nouveau 0000:01:00.0: DRM: GPU lockup - switching to software fbcon
[    3.824856] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    3.843491] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0

any insights ? would this mean it is hardware-related after all ? tomorrow I will be able to try another GPU...

Last edited by nourathar (2017-10-31 12:29:53)

seth · 2017-10-31 13:27:58

@WorMzy, nevertheless he's using 387.22, see the first post logs.

---

If you've nouveau and the ddx nvidia driver at the same time, problems are expectable. And you'll likely do that because of

Using config file: "/etc/X11/xorg.conf"

Why does this file exist? What does it contain?
Move it away and see what happens.

Regardless, the latest nvidia blob seems to cause issues, so to be on the safe side, you should also downgrade the nvidia package.

WorMzy · 2017-10-31 14:32:03

seth wrote:

@WorMzy, nevertheless he's using 387.22

Maybe now, but when the topic was created they were using 387.12-2.

Unfortuantely, since OP updated, they've probably got a new problem (as other users running 387.22-1 and 387.22-2 have). These problems are reportedly resolved by 387.22-3, so an upgrade may remedy this new problem.. but there is a -4 package in testing, so there may still be problems with -3.

Using a snapshot from archive.archlinux.org to downgrade the system to the state it was in when 387.12-2 was being used may be a good idea, then we can diagnose the original problem.

https://wiki.archlinux.org/index.php/Arch_Linux_Archive

nourathar · 2017-10-31 18:32:46

Hi Seth and Wormzy,

thanks a lot for your replies.

Just now I managed to downgrade to linux kernel 4.13.5-1 and nvidia driver 387.12-1, but I get exactly the same crash as before (as in post #2). So that makes me think that my problem is not related to the current turmoil around the nvidia blob.

As said in my original post, I get the same crash after removing my xorg.conf or after regenerating it with nvidia-xconfig. I don't think I had one originally, but I've been trying pretty much everything I could find in the wiki, sorry for the confusion.
You're right I should probably blacklist nvidia when trying with the nouveau driver; normally I only use nvidia and have nouveau blacklisted.

I am getting a bit stuck here and I do not really know what else to do except doing a more drastic reinstall (again) or try another nvidia card...

Last edited by nourathar (2017-10-31 18:34:27)

WorMzy · 2017-10-31 18:36:07

Please remove (or rename) the xorg.conf for now and try to start X. Assuming it still crashes, post the logfile from that session here.

nourathar · 2017-10-31 19:31:58

here is the Xorg log of a session with the downgraded kernel and blob, and without xorg.conf.
the /etc/X11/xorg.conf.d directory is totally empty, the /usr/share/X11/xorg.conf.d directory has one small nvidia related file that I posted below. Without that file, Xorg doesn't load the nvidia driver and the server can not start.

[    20.655] 
X.Org X Server 1.19.5
Release Date: 2017-10-12
[    20.655] X Protocol Version 11, Revision 0
[    20.655] Build Operating System: Linux 4.9.54-1-lts x86_64 
[    20.655] Current Operating System: Linux box 4.13.5-1-ARCH #1 SMP PREEMPT Fri Oct 6 09:58:47 CEST 2017 x86_64
[    20.655] Kernel command line: root=/dev/sdb3 rw initrd=/intel-ucode.img initrd=/initramfs-linux.img fbcon=rotate:3
[    20.655] Build Date: 12 October 2017  09:59:53PM
[    20.655]  
[    20.655] Current version of pixman: 0.34.0
[    20.655] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    20.655] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    20.655] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 31 20:12:09 2017
[    20.657] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    20.657] (==) No Layout section.  Using the first Screen section.
[    20.657] (==) No screen section available. Using defaults.
[    20.657] (**) |-->Screen "Default Screen Section" (0)
[    20.657] (**) |   |-->Monitor "<default monitor>"
[    20.657] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    20.657] (==) Automatically adding devices
[    20.657] (==) Automatically enabling devices
[    20.657] (==) Automatically adding GPU devices
[    20.657] (==) Automatically binding GPU devices
[    20.657] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    20.660] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    20.660] 	Entry deleted from font path.
[    20.660] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    20.660] 	Entry deleted from font path.
[    20.660] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    20.660] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    20.660] 	Entry deleted from font path.
[    20.660] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    20.660] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[    20.660] (==) ModulePath set to "/usr/lib/xorg/modules"
[    20.660] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    20.660] (II) Loader magic: 0x5598d54cbd60
[    20.660] (II) Module ABI versions:
[    20.660] 	X.Org ANSI C Emulation: 0.4
[    20.660] 	X.Org Video Driver: 23.0
[    20.660] 	X.Org XInput driver : 24.1
[    20.660] 	X.Org Server Extension : 10.0
[    20.661] (++) using VT number 1

[    20.661] (--) controlling tty is VT number 1, auto-enabling KeepTty
[    20.663] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[    20.663] (II) xfree86: Adding drm device (/dev/dri/card0)
[    20.664] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[    20.664] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules"
[    20.664] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[    20.665] (--) PCI:*(0:1:0:0) 10de:1080:19da:2203 rev 161, Mem @ 0xfa000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[    20.665] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    20.665] (II) LoadModule: "glx"
[    20.665] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[    20.719] (II) Module glx: vendor="NVIDIA Corporation"
[    20.719] 	compiled for 4.0.2, module version = 1.0.0
[    20.719] 	Module class: X.Org Server Extension
[    20.720] (II) NVIDIA GLX Module  387.12  Thu Sep 28 19:24:49 PDT 2017
[    20.721] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[    20.721] 	loading driver: nvidia
[    20.721] (==) Matched nvidia as autoconfigured driver 0
[    20.721] (==) Matched nouveau as autoconfigured driver 1
[    20.721] (==) Matched nv as autoconfigured driver 2
[    20.721] (==) Matched nouveau as autoconfigured driver 3
[    20.721] (==) Matched nv as autoconfigured driver 4
[    20.721] (==) Matched modesetting as autoconfigured driver 5
[    20.721] (==) Matched fbdev as autoconfigured driver 6
[    20.721] (==) Matched vesa as autoconfigured driver 7
[    20.721] (==) Assigned the driver to the xf86ConfigLayout
[    20.721] (II) LoadModule: "nvidia"
[    20.722] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    20.729] (II) Module nvidia: vendor="NVIDIA Corporation"
[    20.729] 	compiled for 4.0.2, module version = 1.0.0
[    20.729] 	Module class: X.Org Video Driver
[    20.730] (II) LoadModule: "nouveau"
[    20.730] (WW) Warning, couldn't open module nouveau
[    20.730] (II) UnloadModule: "nouveau"
[    20.730] (II) Unloading nouveau
[    20.730] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    20.730] (II) LoadModule: "nv"
[    20.730] (WW) Warning, couldn't open module nv
[    20.730] (II) UnloadModule: "nv"
[    20.730] (II) Unloading nv
[    20.730] (EE) Failed to load module "nv" (module does not exist, 0)
[    20.730] (II) LoadModule: "modesetting"
[    20.730] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    20.731] (II) Module modesetting: vendor="X.Org Foundation"
[    20.731] 	compiled for 1.19.5, module version = 1.19.5
[    20.731] 	Module class: X.Org Video Driver
[    20.731] 	ABI class: X.Org Video Driver, version 23.0
[    20.731] (II) LoadModule: "fbdev"
[    20.731] (WW) Warning, couldn't open module fbdev
[    20.731] (II) UnloadModule: "fbdev"
[    20.731] (II) Unloading fbdev
[    20.731] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    20.731] (II) LoadModule: "vesa"
[    20.731] (WW) Warning, couldn't open module vesa
[    20.731] (II) UnloadModule: "vesa"
[    20.731] (II) Unloading vesa
[    20.731] (EE) Failed to load module "vesa" (module does not exist, 0)
[    20.731] (II) NVIDIA dlloader X Driver  387.12  Thu Sep 28 18:57:27 PDT 2017
[    20.731] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    20.731] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    20.732] (II) systemd-logind: releasing fd for 226:0
[    20.733] (II) Loading sub module "fb"
[    20.733] (II) LoadModule: "fb"
[    20.733] (II) Loading /usr/lib/xorg/modules/libfb.so
[    20.734] (II) Module fb: vendor="X.Org Foundation"
[    20.734] 	compiled for 1.19.5, module version = 1.0.0
[    20.734] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.734] (II) Loading sub module "wfb"
[    20.734] (II) LoadModule: "wfb"
[    20.734] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    20.736] (II) Module wfb: vendor="X.Org Foundation"
[    20.736] 	compiled for 1.19.5, module version = 1.0.0
[    20.736] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.736] (II) Loading sub module "ramdac"
[    20.736] (II) LoadModule: "ramdac"
[    20.736] (II) Module "ramdac" already built-in
[    20.738] (WW) Falling back to old probe method for modesetting
[    20.738] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    20.738] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    20.738] (==) NVIDIA(0): RGB weight 888
[    20.738] (==) NVIDIA(0): Default visual is TrueColor
[    20.738] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    20.738] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[    20.738] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[    20.738] (**) NVIDIA(0): Enabling 2D acceleration
[    21.629] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[    21.629] (--) NVIDIA(0):     CRT-0
[    21.629] (--) NVIDIA(0):     CRT-1
[    21.629] (--) NVIDIA(0):     DFP-0 (boot)
[    21.629] (--) NVIDIA(0):     DFP-1
[    21.629] (--) NVIDIA(0):     DFP-2
[    21.630] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 580 (GF110) at PCI:1:0:0 (GPU-0)
[    21.630] (--) NVIDIA(0): Memory: 3145728 kBytes
[    21.630] (--) NVIDIA(0): VideoBIOS: 70.10.48.00.01
[    21.630] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    21.637] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    21.637] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    21.637] (--) NVIDIA(GPU-0): 
[    21.639] (--) NVIDIA(GPU-0): CRT-1: disconnected
[    21.639] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[    21.639] (--) NVIDIA(GPU-0): 
[    21.652] (--) NVIDIA(GPU-0): Eizo S2243W (DFP-0): connected
[    21.652] (--) NVIDIA(GPU-0): Eizo S2243W (DFP-0): Internal TMDS
[    21.652] (--) NVIDIA(GPU-0): Eizo S2243W (DFP-0): 330.0 MHz maximum pixel clock
[    21.652] (--) NVIDIA(GPU-0): 
[    21.652] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    21.652] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    21.652] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    21.652] (--) NVIDIA(GPU-0): 
[    21.654] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    21.654] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[    21.654] (--) NVIDIA(GPU-0): DFP-2: 330.0 MHz maximum pixel clock
[    21.654] (--) NVIDIA(GPU-0): 
[    21.655] (==) NVIDIA(0): 
[    21.655] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    21.655] (==) NVIDIA(0):     will be used as the requested mode.
[    21.655] (==) NVIDIA(0): 
[    21.656] (II) NVIDIA(0): Validated MetaModes:
[    21.656] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[    21.656] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
[    21.659] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[    21.659] (--) NVIDIA(0):     option
[    21.659] (II) UnloadModule: "modesetting"
[    21.659] (II) Unloading modesetting
[    21.659] (--) Depth 24 pixmap format is 32 bpp
[    21.660] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[    21.660] (II) NVIDIA:     access.
[    21.668] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    21.668] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    21.668] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    21.668] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    21.668] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    21.668] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    21.668] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    21.668] (II) NVIDIA(0):     Config Options in the README.
[    21.675] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[    21.717] (==) NVIDIA(0): Disabling shared memory pixmaps
[    21.717] (==) NVIDIA(0): Backing store enabled
[    21.717] (==) NVIDIA(0): Silken mouse enabled
[    21.718] (==) NVIDIA(0): DPMS enabled
[    21.719] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[    21.719] (II) Loading sub module "dri2"
[    21.719] (II) LoadModule: "dri2"
[    21.719] (II) Module "dri2" already built-in
[    21.719] (II) NVIDIA(0): [DRI2] Setup complete
[    21.719] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    21.719] (--) RandR disabled
[    21.721] (II) Initializing extension GLX
[    21.721] (II) Indirect GLX disabled.
[    21.721] (EE) 
Fatal server error:
[    21.721] (EE) NVIDIA: A GPU exception occurred during X server initialization(EE) 
[    21.721] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    21.721] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    21.721] (EE) 
[    21.747] (EE) 
FatalError re-entered, aborting
[    21.747] (EE) NVIDIA: A GPU exception occurred during X server initialization(EE)

Section "OutputClass"
    Identifier "intel"
    MatchDriver "i915"
    Driver "modesetting"
EndSection

Section "OutputClass"
    Identifier "nvidia"
    MatchDriver "nvidia-drm"
    Driver "nvidia"
    Option "AllowEmptyInitialConfiguration"
    Option "PrimaryGPU" "yes"
    ModulePath "/usr/lib/nvidia/xorg"
EndSection

seth · 2017-10-31 19:44:04

Without that file, Xorg doesn't load the nvidia driver and the server can not start.

That's fishy - is this a hybrid system at all?
What's the failing xorg log and please provide a complete "dmesg" (and "lspci" for simplicity ;-)

nourathar · 2017-10-31 19:58:56

hmm, why is that fishy ?
This is not a hybrid system, why would it be ?

The problem is that the GPU crash also corrupts the console, so I can not dump dmesg to a file anymore after it crashed...
I just now posted a log of an Xorg session with the GPU crash ?
Without that small config file I posted, Xorg attempts to load all kinds of modules but doesn't find nvidia. And since nouveau is blacklisted it can't load anything and gives up. No crash there.
As noted in the first post, the GPU correctly shows up in lspci, correct model number and listing nvidia as the driver. No other GPU's present. Is there something specific I should try to dig up there ?

thanks for looking into this !

I will now get you a log of an Xorg session without any nvidia-related config and a dmesg of a login up to starting X..

Last edited by nourathar (2017-10-31 20:05:02)

seth · 2017-10-31 20:14:05

hmm, why is that fishy ?

Because it should just start - this suggest that you need to convince the system into an nvidia GPU that's actually not detected.

This is not a hybrid system, why would it be ?

Why do you have the intel config there? Why do you define nvidia as the primary GPU (if there's only one)

The problem is that the GPU crash also corrupts the console, so I can not dump dmesg to a file anymore after it crashed...

Can you ssh into the system?

progandy · 2017-10-31 20:22:46

seth wrote:

This is not a hybrid system, why would it be ?
Why do you have the intel config there? Why do you define nvidia as the primary GPU (if there's only one)

That file is part of nvidia-utils
https://git.archlinux.org/svntogit/pack … idia-utils

nourathar · 2017-10-31 20:23:32

Hi,

with diligent blind typing I did manage to get a full dmesg of an Xorg session with a crashing GPU:

[    0.000000] microcode: microcode updated early to revision 0x29, date = 2013-06-12
[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x4b7 with crng_init=0
[    0.000000] Linux version 4.13.5-1-ARCH (builduser@tobias) (gcc version 7.2.0 (GCC)) #1 SMP PREEMPT Fri Oct 6 09:58:47 CEST 2017
[    0.000000] Command line: root=/dev/sdb3 rw initrd=/intel-ucode.img initrd=/initramfs-linux.img fbcon=rotate:3
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df411fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df412000-0x00000000df46dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df46e000-0x00000000df5a0fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000df5a1000-0x00000000df5b1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df5b2000-0x00000000df5c8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000df5c9000-0x00000000df5cafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df5cb000-0x00000000df5d4fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000df5d5000-0x00000000df5defff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df5df000-0x00000000df638fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000df639000-0x00000000df67bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df67c000-0x00000000df7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x0215f018-0x02173457] usable ==> usable
[    0.000000] e820: update [mem 0x0215f018-0x02173457] usable ==> usable
[    0.000000] e820: update [mem 0x02174018-0x02180857] usable ==> usable
[    0.000000] e820: update [mem 0x02174018-0x02180857] usable ==> usable
[    0.000000] e820: update [mem 0x02181018-0x02188e57] usable ==> usable
[    0.000000] e820: update [mem 0x02181018-0x02188e57] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000000215f017] usable
[    0.000000] reserve setup_data: [mem 0x000000000215f018-0x0000000002173457] usable
[    0.000000] reserve setup_data: [mem 0x0000000002173458-0x0000000002174017] usable
[    0.000000] reserve setup_data: [mem 0x0000000002174018-0x0000000002180857] usable
[    0.000000] reserve setup_data: [mem 0x0000000002180858-0x0000000002181017] usable
[    0.000000] reserve setup_data: [mem 0x0000000002181018-0x0000000002188e57] usable
[    0.000000] reserve setup_data: [mem 0x0000000002188e58-0x00000000df411fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000df412000-0x00000000df46dfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000df46e000-0x00000000df5a0fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000df5a1000-0x00000000df5b1fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000df5b2000-0x00000000df5c8fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000df5c9000-0x00000000df5cafff] usable
[    0.000000] reserve setup_data: [mem 0x00000000df5cb000-0x00000000df5d4fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000df5d5000-0x00000000df5defff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000df5df000-0x00000000df638fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000df639000-0x00000000df67bfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000df67c000-0x00000000df7fffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000041f7fffff] usable
[    0.000000] efi: EFI v2.00 by American Megatrends
[    0.000000] efi:  SMBIOS=0xdf637a18  ACPI=0xdf460000  ACPI 2.0=0xdf460000  MPS=0xfc9d0 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: System manufacturer System Product Name/P8Z68-M PRO, BIOS 0603 11/03/2011
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x41f800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D7FFF write-protect
[    0.000000]   D8000-DFFFF uncachable
[    0.000000]   E0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask C00000000 write-back
[    0.000000]   1 base 400000000 mask FE0000000 write-back
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 base 41F800000 mask FFF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fccf0-0x000fccff] mapped at [ffff8b25000fccf0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff8b2500097000] 97000 size 24576
[    0.000000] BRK [0x197d64000, 0x197d64fff] PGTABLE
[    0.000000] BRK [0x197d65000, 0x197d65fff] PGTABLE
[    0.000000] BRK [0x197d66000, 0x197d66fff] PGTABLE
[    0.000000] BRK [0x197d67000, 0x197d67fff] PGTABLE
[    0.000000] BRK [0x197d68000, 0x197d68fff] PGTABLE
[    0.000000] BRK [0x197d69000, 0x197d69fff] PGTABLE
[    0.000000] BRK [0x197d6a000, 0x197d6afff] PGTABLE
[    0.000000] BRK [0x197d6b000, 0x197d6bfff] PGTABLE
[    0.000000] BRK [0x197d6c000, 0x197d6cfff] PGTABLE
[    0.000000] BRK [0x197d6d000, 0x197d6dfff] PGTABLE
[    0.000000] BRK [0x197d6e000, 0x197d6efff] PGTABLE
[    0.000000] Secure boot disabled
[    0.000000] RAMDISK: [mem 0x7f84f000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000DF460000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DF460068 00004C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DF469E60 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DF460140 009D1E (v02 ALASKA A M I    00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000DF5D6F80 000040
[    0.000000] ACPI: APIC 0x00000000DF469F58 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DF469FF0 0001D6 (v01 AMICPU PROC     00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 0x00000000DF46A1C8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DF46A208 000038 (v01 ALASKA A M I    01072009 AMI. 00000004)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f7fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x41f7f0000-0x41f7f4fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041f7fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000df411fff]
[    0.000000]   node   0: [mem 0x00000000df5c9000-0x00000000df5cafff]
[    0.000000]   node   0: [mem 0x00000000df67c000-0x00000000df7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041f7fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f7fffff]
[    0.000000] On node 0 totalpages: 4189495
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 41 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14231 pages used for memmap
[    0.000000]   DMA32 zone: 910744 pages, LIFO batch:31
[    0.000000]   Normal zone: 51168 pages used for memmap
[    0.000000]   Normal zone: 3274752 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x0215f000-0x0215ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x02173000-0x02173fff]
[    0.000000] PM: Registered nosave memory: [mem 0x02174000-0x02174fff]
[    0.000000] PM: Registered nosave memory: [mem 0x02180000-0x02180fff]
[    0.000000] PM: Registered nosave memory: [mem 0x02181000-0x02181fff]
[    0.000000] PM: Registered nosave memory: [mem 0x02188000-0x02188fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf412000-0xdf46dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf46e000-0xdf5a0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf5a1000-0xdf5b1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf5b2000-0xdf5c8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf5cb000-0xdf5d4fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf5d5000-0xdf5defff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf5df000-0xdf638fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf639000-0xdf67bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf800000-0xfed1bfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff8b291f400000 s106520 r8192 d32744 u262144
[    0.000000] pcpu-alloc: s106520 r8192 d32744 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4123991
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/sdb3 rw initrd=/intel-ucode.img initrd=/initramfs-linux.img fbcon=rotate:3
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16242780K/16757980K available (6643K kernel code, 1134K rwdata, 2048K rodata, 1336K init, 908K bss, 515200K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 28349 entries in 111 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 8448, nr_irqs: 488, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 3400.162 MHz processor
[    0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 6803.67 BogoMIPS (lpj=11333873)
[    0.003333] pid_max: default: 32768 minimum: 301
[    0.003333] ACPI: Core revision 20170531
[    0.009054] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.010019] Security Framework initialized
[    0.010019] Yama: becoming mindful.
[    0.014908] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.015867] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.015907] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.015938] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.016081] CPU: Physical Processor ID: 0
[    0.016081] CPU: Processor Core ID: 0
[    0.016084] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.016085] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.016088] mce: CPU supports 9 MCE banks
[    0.016094] CPU0: Thermal monitoring enabled (TM1)
[    0.016102] process: using mwait in idle threads
[    0.016104] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.016105] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.016178] Freeing SMP alternatives memory: 24K
[    0.022395] smpboot: Max logical packages: 2
[    0.022777] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.055790] TSC deadline timer enabled
[    0.055792] smpboot: CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.066671] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.066687] ... version:                3
[    0.066687] ... bit width:              48
[    0.066687] ... generic registers:      4
[    0.066688] ... value mask:             0000ffffffffffff
[    0.066688] ... max period:             00007fffffffffff
[    0.066689] ... fixed-purpose events:   3
[    0.066689] ... event mask:             000000070000000f
[    0.073335] Hierarchical SRCU implementation.
[    0.086774] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.093335] smp: Bringing up secondary CPUs ...
[    0.120008] x86: Booting SMP configuration:
[    0.120008] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.865352] smp: Brought up 1 node, 8 CPUs
[    0.865352] smpboot: Total of 8 processors activated (54435.81 BogoMIPS)
[    0.867063] devtmpfs: initialized
[    0.867063] x86/mm: Memory block size: 128MB
[    0.867559] PM: Registering ACPI NVS region [mem 0xdf412000-0xdf46dfff] (376832 bytes)
[    0.867559] PM: Registering ACPI NVS region [mem 0xdf5a1000-0xdf5b1fff] (69632 bytes)
[    0.867559] PM: Registering ACPI NVS region [mem 0xdf5d5000-0xdf5defff] (40960 bytes)
[    0.867559] PM: Registering ACPI NVS region [mem 0xdf639000-0xdf67bfff] (274432 bytes)
[    0.867559] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.867559] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.867559] pinctrl core: initialized pinctrl subsystem
[    0.867559] RTC time: 20:06:34, date: 10/31/17
[    0.867559] NET: Registered protocol family 16
[    0.867559] cpuidle: using governor ladder
[    0.867559] cpuidle: using governor menu
[    0.867559] PCCT header not found.
[    0.867559] ACPI: bus type PCI registered
[    0.867559] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.867559] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.867559] PCI: not using MMCONFIG
[    0.867559] PCI: Using configuration type 1 for base access
[    0.867559] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.867559] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.867559] ACPI: Added _OSI(Module Device)
[    0.867559] ACPI: Added _OSI(Processor Device)
[    0.867559] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.867559] ACPI: Added _OSI(Processor Aggregator Device)
[    0.867559] ACPI: Executed 1 blocks of module-level executable AML code
[    0.871623] ACPI: Dynamic OEM Table Load:
[    0.871628] ACPI: SSDT 0xFFFF8B290C892800 0006F4 (v01 AMI    IST      00000001 MSFT 03000001)
[    0.871803] ACPI: Dynamic OEM Table Load:
[    0.871805] ACPI: SSDT 0xFFFF8B290CBD9600 0000E4 (v01 AMI    CST      00000001 MSFT 03000001)
[    0.872531] ACPI: Interpreter enabled
[    0.872544] ACPI: (supports S0 S1 S3 S4 S5)
[    0.872544] ACPI: Using IOAPIC for interrupt routing
[    0.872562] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.872600] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[    0.872603] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.872657] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.873023] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.877204] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.877207] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.877297] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
[    0.877378] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    0.877384] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.877561] PCI host bridge to bus 0000:00
[    0.877562] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.877563] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.877564] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.877565] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000dffff window]
[    0.877566] pci_bus 0000:00: root bus resource [mem 0xe4000000-0xffffffff window]
[    0.877567] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.877572] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.877639] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.877663] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.877744] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.877768] pci 0000:00:16.0: reg 0x10: [mem 0xfb308000-0xfb30800f 64bit]
[    0.877835] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.877898] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.877918] pci 0000:00:1a.0: reg 0x10: [mem 0xfb307000-0xfb3073ff]
[    0.877995] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.878054] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.878072] pci 0000:00:1b.0: reg 0x10: [mem 0xfb300000-0xfb303fff 64bit]
[    0.878131] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.878191] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.878267] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.878333] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.878408] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.878471] pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
[    0.878547] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.878610] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[    0.878686] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.878747] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[    0.878823] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.878887] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.878907] pci 0000:00:1d.0: reg 0x10: [mem 0xfb306000-0xfb3063ff]
[    0.878984] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.879042] pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
[    0.879192] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.879209] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.879215] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.879222] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.879228] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.879235] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.879242] pci 0000:00:1f.2: reg 0x24: [mem 0xfb305000-0xfb3057ff]
[    0.879278] pci 0000:00:1f.2: PME# supported from D3hot
[    0.879330] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.879347] pci 0000:00:1f.3: reg 0x10: [mem 0xfb304000-0xfb3040ff 64bit]
[    0.879365] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.879448] pci 0000:01:00.0: [10de:1080] type 00 class 0x030000
[    0.879461] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[    0.879469] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[    0.879476] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.879481] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.879486] pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
[    0.879552] pci 0000:01:00.1: [10de:0e09] type 00 class 0x040300
[    0.879563] pci 0000:01:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
[    0.879648] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.879649] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.879651] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfb0fffff]
[    0.879653] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.879688] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.879747] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.879780] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.879812] pci 0000:03:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[    0.879832] pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    0.879939] pci 0000:03:00.0: supports D1 D2
[    0.879939] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.890021] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.890024] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.890031] pci 0000:00:1c.4:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.890088] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[    0.890230] pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode)
[    0.890239] pci 0000:00:1c.5:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.890240] pci 0000:00:1c.5:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.890241] pci 0000:00:1c.5:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.890242] pci 0000:00:1c.5:   bridge window [mem 0x000c8000-0x000dffff window] (subtractive decode)
[    0.890242] pci 0000:00:1c.5:   bridge window [mem 0xe4000000-0xffffffff window] (subtractive decode)
[    0.890348] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[    0.890368] pci 0000:04:00.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.890369] pci 0000:04:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.890370] pci 0000:04:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.890371] pci 0000:04:00.0:   bridge window [mem 0x000c8000-0x000dffff window] (subtractive decode)
[    0.890371] pci 0000:04:00.0:   bridge window [mem 0xe4000000-0xffffffff window] (subtractive decode)
[    0.890433] pci 0000:06:00.0: [1b21:0612] type 00 class 0x010601
[    0.890462] pci 0000:06:00.0: reg 0x10: [io  0xc050-0xc057]
[    0.890474] pci 0000:06:00.0: reg 0x14: [io  0xc040-0xc043]
[    0.890487] pci 0000:06:00.0: reg 0x18: [io  0xc030-0xc037]
[    0.890499] pci 0000:06:00.0: reg 0x1c: [io  0xc020-0xc023]
[    0.890512] pci 0000:06:00.0: reg 0x20: [io  0xc000-0xc01f]
[    0.890525] pci 0000:06:00.0: reg 0x24: [mem 0xfb200000-0xfb2001ff]
[    0.900015] pci 0000:00:1c.6: PCI bridge to [bus 06]
[    0.900019] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
[    0.900022] pci 0000:00:1c.6:   bridge window [mem 0xfb200000-0xfb2fffff]
[    0.900083] pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.900123] pci 0000:07:00.0: reg 0x10: [mem 0xfb100000-0xfb107fff 64bit]
[    0.900275] pci 0000:07:00.0: PME# supported from D3hot D3cold
[    0.910017] pci 0000:00:1c.7: PCI bridge to [bus 07]
[    0.910022] pci 0000:00:1c.7:   bridge window [mem 0xfb100000-0xfb1fffff]
[    0.910428] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.910465] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.910500] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.910535] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.910570] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.910605] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.910640] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.910676] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.910723] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.910770] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.910770] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.910770] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.910770] vgaarb: loaded
[    0.910770] EDAC MC: Ver: 3.0.0
[    0.910770] Registered efivars operations
[    0.937076] PCI: Using ACPI for IRQ routing
[    0.938040] PCI: pci_cache_line_size set to 64 bytes
[    0.938090] e820: reserve RAM buffer [mem 0x0215f018-0x03ffffff]
[    0.938091] e820: reserve RAM buffer [mem 0x02174018-0x03ffffff]
[    0.938092] e820: reserve RAM buffer [mem 0x02181018-0x03ffffff]
[    0.938093] e820: reserve RAM buffer [mem 0xdf412000-0xdfffffff]
[    0.938094] e820: reserve RAM buffer [mem 0xdf5cb000-0xdfffffff]
[    0.938094] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[    0.938095] e820: reserve RAM buffer [mem 0x41f800000-0x41fffffff]
[    0.938151] NetLabel: Initializing
[    0.938152] NetLabel:  domain hash size = 128
[    0.938152] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.938163] NetLabel:  unlabeled traffic allowed by default
[    0.940226] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.940230] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.943348] clocksource: Switched to clocksource hpet
[    0.949340] VFS: Disk quotas dquot_6.6.0
[    0.949356] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.949409] pnp: PnP ACPI init
[    0.949508] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[    0.949509] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
[    0.949510] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.949511] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.949512] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.949515] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.949573] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.949575] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.949669] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.949700] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.949701] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.949891] system 00:04: [io  0x0400-0x0453] has been reserved
[    0.949892] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.949893] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.949894] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.949895] system 00:04: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.949896] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.949898] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.949899] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.949938] system 00:05: [io  0x0454-0x0457] has been reserved
[    0.949939] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.950090] pnp: PnP ACPI: found 6 devices
[    0.955874] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.955926] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.955928] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.955930] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfb0fffff]
[    0.955931] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.955934] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.955944] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.955946] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.955952] pci 0000:00:1c.4:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.955957] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.955976] pci 0000:00:1c.5: PCI bridge to [bus 04-05]
[    0.955986] pci 0000:00:1c.6: PCI bridge to [bus 06]
[    0.955988] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
[    0.955992] pci 0000:00:1c.6:   bridge window [mem 0xfb200000-0xfb2fffff]
[    0.955999] pci 0000:00:1c.7: PCI bridge to [bus 07]
[    0.956003] pci 0000:00:1c.7:   bridge window [mem 0xfb100000-0xfb1fffff]
[    0.956011] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.956012] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.956013] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.956014] pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000dffff window]
[    0.956014] pci_bus 0000:00: resource 8 [mem 0xe4000000-0xffffffff window]
[    0.956015] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.956016] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
[    0.956017] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[    0.956018] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.956019] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.956020] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.956021] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.956021] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.956022] pci_bus 0000:04: resource 7 [mem 0x000c8000-0x000dffff window]
[    0.956023] pci_bus 0000:04: resource 8 [mem 0xe4000000-0xffffffff window]
[    0.956024] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.956025] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.956026] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.956026] pci_bus 0000:05: resource 7 [mem 0x000c8000-0x000dffff window]
[    0.956027] pci_bus 0000:05: resource 8 [mem 0xe4000000-0xffffffff window]
[    0.956028] pci_bus 0000:06: resource 0 [io  0xc000-0xcfff]
[    0.956029] pci_bus 0000:06: resource 1 [mem 0xfb200000-0xfb2fffff]
[    0.956030] pci_bus 0000:07: resource 1 [mem 0xfb100000-0xfb1fffff]
[    0.956086] NET: Registered protocol family 2
[    0.956206] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.956358] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.956457] TCP: Hash tables configured (established 131072 bind 65536)
[    0.956486] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.956520] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.956572] NET: Registered protocol family 1
[    0.956797] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.956903] PCI: CLS 64 bytes, default 64
[    0.956929] Unpacking initramfs...
[    1.030314] Freeing initrd memory: 7872K
[    1.030322] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.030323] software IO TLB [mem 0xdb412000-0xdf412000] (64MB) mapped at [ffff8b25db412000-ffff8b25df411fff]
[    1.030574] Scanning for low memory corruption every 60 seconds
[    1.030976] Initialise system trusted keyrings
[    1.030982] Key type blacklist registered
[    1.031019] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    1.031716] zbud: loaded
[    1.032735] Key type asymmetric registered
[    1.032756] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.032783] io scheduler noop registered
[    1.032783] io scheduler deadline registered
[    1.032799] io scheduler cfq registered (default)
[    1.032800] io scheduler mq-deadline registered
[    1.032800] io scheduler kyber registered
[    1.032815] io scheduler bfq registered
[    1.033407] pcieport 0000:00:01.0: Signaling PME with IRQ 24
[    1.033430] pcieport 0000:00:1c.0: Signaling PME with IRQ 25
[    1.033445] pcieport 0000:00:1c.4: Signaling PME with IRQ 26
[    1.033461] pcieport 0000:00:1c.6: Signaling PME with IRQ 27
[    1.033481] pcieport 0000:00:1c.7: Signaling PME with IRQ 28
[    1.033496] efifb: probing for efifb
[    1.033503] efifb: framebuffer at 0xf1000000, using 1876k, total 1875k
[    1.033504] efifb: mode is 800x600x32, linelength=3200, pages=1
[    1.033504] efifb: scrolling: redraw
[    1.033505] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.035046] Console: switching to colour frame buffer device 75x50
[    1.036424] fb0: EFI VGA frame buffer device
[    1.036428] intel_idle: MWAIT substates: 0x1120
[    1.036429] intel_idle: v0.4.1 model 0x2A
[    1.036613] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.040548] GHES: HEST is not enabled!
[    1.040648] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.041742] rtc_cmos 00:02: RTC can wake from S4
[    1.041855] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.041879] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.041884] intel_pstate: Intel P-state driver initializing
[    1.042370] ledtrig-cpu: registered to indicate activity on CPUs
[    1.042414] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    1.042707] NET: Registered protocol family 10
[    1.047647] Segment Routing with IPv6
[    1.047676] NET: Registered protocol family 17
[    1.048303] RAS: Correctable Errors collector initialized.
[    1.048337] microcode: sig=0x206a7, pf=0x2, revision=0x29
[    1.048574] microcode: Microcode Update Driver: v2.2.
[    1.048586] sched_clock: Marking stable (1048566471, 0)->(1292759485, -244193014)
[    1.048880] registered taskstats version 1
[    1.048887] Loading compiled-in X.509 certificates
[    1.048911] zswap: loaded using pool lzo/zbud
[    1.052526] Key type big_key registered
[    1.052846]   Magic number: 5:542:145
[    1.052878] acpi device:16: hash matches
[    1.052969] rtc_cmos 00:02: setting system clock to 2017-10-31 20:06:34 UTC (1509480394)
[    1.053889] PM: Hibernation image not present or could not be loaded.
[    1.056285] Freeing unused kernel memory: 1336K
[    1.056287] Write protecting the kernel read-only data: 10240k
[    1.056851] Freeing unused kernel memory: 1536K
[    1.219349] i8042: PNP: No PS/2 controller found.
[    1.222537] ACPI: bus type USB registered
[    1.222556] usbcore: registered new interface driver usbfs
[    1.222562] usbcore: registered new interface driver hub
[    1.222590] usbcore: registered new device driver usb
[    1.222918] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.223319] SCSI subsystem initialized
[    1.223488] ehci-pci: EHCI PCI platform driver
[    1.223605] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.223610] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.223624] ehci-pci 0000:00:1a.0: debug port 2
[    1.226988] libata version 3.00 loaded.
[    1.227533] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.227543] ehci-pci 0000:00:1a.0: irq 23, io mem 0xfb307000
[    1.240026] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.240305] hub 1-0:1.0: USB hub found
[    1.240312] hub 1-0:1.0: 2 ports detected
[    1.240443] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    1.240447] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 2
[    1.244872] xhci_hcd 0000:07:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[    1.245189] hub 2-0:1.0: USB hub found
[    1.245197] hub 2-0:1.0: 2 ports detected
[    1.245257] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    1.245260] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3
[    1.245287] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.245287] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.245458] hub 3-0:1.0: USB hub found
[    1.245466] hub 3-0:1.0: 2 ports detected
[    1.245553] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.245563] ehci-pci 0000:00:1d.0: debug port 2
[    1.249474] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.249478] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb306000
[    1.254039] i8042: PNP: No PS/2 controller found.
[    1.263340] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.263543] hub 4-0:1.0: USB hub found
[    1.263550] hub 4-0:1.0: 2 ports detected
[    1.263703] ahci 0000:00:1f.2: version 3.0
[    1.274039] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
[    1.274042] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    1.313920] scsi host0: ahci
[    1.314071] scsi host1: ahci
[    1.314300] scsi host2: ahci
[    1.314441] scsi host3: ahci
[    1.314583] scsi host4: ahci
[    1.314726] scsi host5: ahci
[    1.314776] ata1: SATA max UDMA/133 abar m2048@0xfb305000 port 0xfb305100 irq 37
[    1.314779] ata2: SATA max UDMA/133 abar m2048@0xfb305000 port 0xfb305180 irq 37
[    1.314780] ata3: DUMMY
[    1.314782] ata4: SATA max UDMA/133 abar m2048@0xfb305000 port 0xfb305280 irq 37
[    1.314784] ata5: SATA max UDMA/133 abar m2048@0xfb305000 port 0xfb305300 irq 37
[    1.314787] ata6: SATA max UDMA/133 abar m2048@0xfb305000 port 0xfb305380 irq 37
[    1.314966] ahci 0000:06:00.0: SSS flag set, parallel bus scan disabled
[    1.315022] ahci 0000:06:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.315026] ahci 0000:06:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
[    1.315389] scsi host6: ahci
[    1.315515] scsi host7: ahci
[    1.315586] ata7: SATA max UDMA/133 abar m512@0xfb200000 port 0xfb200100 irq 38
[    1.315589] ata8: SATA max UDMA/133 abar m512@0xfb200000 port 0xfb200180 irq 38
[    1.560040] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.583370] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.620040] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[    1.627091] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.627116] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.627140] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.627163] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.627185] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.627434] ata2.00: ATA-8: Corsair Performance Pro, 1.0, max UDMA/133
[    1.627437] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.627735] ata1.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
[    1.627737] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.627859] ata2.00: configured for UDMA/133
[    1.628308] ata1.00: configured for UDMA/133
[    1.628462] ata5.00: ATA-8: ST31500341AS, LC1A, max UDMA/133
[    1.628464] ata5.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.628484] ata6.00: ATA-8: ST31500341AS, SD17, max UDMA/133
[    1.628487] ata6.00: 2930277168 sectors, multi 16: LBA48 NCQ (not used)
[    1.628493] ata6.00: WARNING: device requires firmware update to be fully functional
[    1.628494] ata6.00:          contact the vendor or visit http://ata.wiki.kernel.org
[    1.628582] scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 0A80 PQ: 0 ANSI: 5
[    1.630226] ata5.00: configured for UDMA/133
[    1.630248] ata6.00: configured for UDMA/133
[    1.630286] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX00, max UDMA/100
[    1.630517] ata7: SATA link down (SStatus 0 SControl 300)
[    1.634620] ata4.00: configured for UDMA/100
[    1.673898] scsi 1:0:0:0: Direct-Access     ATA      Corsair Performa 1.0  PQ: 0 ANSI: 5
[    1.697658] hub 1-1:1.0: USB hub found
[    1.697854] hub 1-1:1.0: 6 ports detected
[    1.716663] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS70  EX00 PQ: 0 ANSI: 5
[    1.721158] hub 4-1:1.0: USB hub found
[    1.721354] hub 4-1:1.0: 8 ports detected
[    1.731672] scsi 4:0:0:0: Direct-Access     ATA      ST31500341AS     LC1A PQ: 0 ANSI: 5
[    1.767180] scsi 5:0:0:0: Direct-Access     ATA      ST31500341AS     SD17 PQ: 0 ANSI: 5
[    1.812821] hub 2-1:1.0: USB hub found
[    1.813080] hub 2-1:1.0: 4 ports detected
[    1.983335] usb 2-2: new high-speed USB device number 3 using xhci_hcd
[    2.000025] usb 4-1.5: new high-speed USB device number 3 using ehci-pci
[    2.050034] tsc: Refined TSC clocksource calibration: 3400.021 MHz
[    2.050044] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x310262b0a99, max_idle_ns: 440795373932 ns
[    2.101405] usb-storage 4-1.5:1.0: USB Mass Storage device detected
[    2.101545] scsi host8: usb-storage 4-1.5:1.0
[    2.101628] usbcore: registered new interface driver usb-storage
[    2.106886] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.106889] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.106907] sd 0:0:0:0: [sda] Write Protect is off
[    2.106909] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.106923] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    2.106935] sd 4:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[    2.106941] sd 1:0:0:0: [sdb] Write Protect is off
[    2.106943] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.106956] sd 4:0:0:0: [sdc] Write Protect is off
[    2.106959] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.106960] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.106962] sd 5:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[    2.106982] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.106984] sd 5:0:0:0: [sdd] Write Protect is off
[    2.106986] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    2.106994] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.107014] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.108754]  sdb: sdb1 sdb2 sdb3
[    2.109118] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.126977] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.126980] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.127234] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.130245] ata8: SATA link down (SStatus 0 SControl 300)
[    2.162682]  sdc: sdc1
[    2.163144] sd 4:0:0:0: [sdc] Attached SCSI disk
[    2.171492]  sda: sda1
[    2.172015] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.182391]  sdd: sdd1
[    2.182859] sd 5:0:0:0: [sdd] Attached SCSI disk
[    2.249972] usb 2-1.1: new full-speed USB device number 4 using xhci_hcd
[    2.351977] hidraw: raw HID events driver (C) Jiri Kosina
[    2.352872] usbcore: registered new interface driver usbhid
[    2.352873] usbhid: USB HID core driver
[    2.353103] input: Clearly Superior Technologies. CST Laser Trackball as /devices/pci0000:00/0000:00:1c.7/0000:07:00.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:5332:1300.0001/input/input0
[    2.353127] hid-generic 0003:5332:1300.0001: input,hidraw0: USB HID v1.11 Mouse [Clearly Superior Technologies. CST Laser Trackball] on usb-0000:07:00.0-1.1/input0
[    2.410469] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[    2.423308] usb 2-1.3: new full-speed USB device number 5 using xhci_hcd
[    2.493644] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.497132] systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    2.497226] systemd[1]: Detected architecture x86-64.
[    2.498284] systemd[1]: Set hostname to <box>.
[    2.524884] input: LEOPOLD Mini Keyboard as /devices/pci0000:00/0000:00:1c.7/0000:07:00.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:0853:0134.0002/input/input1
[    2.555334] systemd[1]: Reached target Remote File Systems.
[    2.555436] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.555703] systemd[1]: Created slice System Slice.
[    2.556454] systemd[1]: Listening on Process Core Dump Socket.
[    2.556516] systemd[1]: Listening on LVM2 metadata daemon socket.
[    2.556646] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.556710] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    2.569959] EXT4-fs (sdb3): re-mounted. Opts: data=ordered
[    2.580024] hid-generic 0003:0853:0134.0002: input,hidraw1: USB HID v1.11 Keyboard [LEOPOLD Mini Keyboard] on usb-0000:07:00.0-1.3/input0
[    2.612928] systemd-journald[256]: Received request to flush runtime journal from PID 1
[    2.627427] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    2.627435] ACPI: Power Button [PWRB]
[    2.627464] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.627479] ACPI: Power Button [PWRF]
[    2.637693] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.641017] i8042: PNP: No PS/2 controller found.
[    2.641403] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.SBRG.GPBX) (20170531/utaddress-247)
[    2.641407] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.641408] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.SBRG.GPBX) (20170531/utaddress-247)
[    2.641411] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.641411] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.SBRG.GPBX) (20170531/utaddress-247)
[    2.641414] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000050F (\_GPE.GPIO) (20170531/utaddress-247)
[    2.641417] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.641418] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.647498] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.648052] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffa98901a29000, 14:da:e9:f5:de:33, XID 0c900800 IRQ 40
[    2.648054] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.677955] Adding 16777212k swap on /dev/sdb2.  Priority:-1 extents:1 across:16777212k SSFS
[    2.697483] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    2.697860] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    2.697861] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    2.697862] RAPL PMU: hw unit of domain package 2^-16 Joules
[    2.697862] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    2.717009] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[    2.717101] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.717128] i8042: PNP: No PS/2 controller found.
[    2.717320] usbcore: registered new interface driver uas
[    2.719398] mousedev: PS/2 mouse device common for all mice
[    2.722914] ppdev: user-space parallel port driver
[    2.722985] Linux agpgart interface v0.103
[    2.723095] AVX version of gcm_enc/dec engaged.
[    2.723096] AES CTR mode by8 optimization enabled
[    2.725687] asus_wmi: ASUS WMI generic driver loaded
[    2.727415] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    2.729709] iTCO_vendor_support: vendor-support=0
[    2.729849] asus_wmi: Initialization: 0x0
[    2.729864] asus_wmi: BIOS WMI version: 0.9
[    2.729883] asus_wmi: SFUN value: 0x0
[    2.730133] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
[    2.730203] asus_wmi: Number of fans: 1
[    2.730353] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    2.730599] snd_hda_intel 0000:01:00.1: Disabling MSI
[    2.730602] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    2.730904] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.730925] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    2.733392] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.740850] random: crng init done
[    2.774134] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    2.774136] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.774137] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.774137] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    2.774138] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x11/0x1e
[    2.774138] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    2.774139] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    2.774140] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    2.774141] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    2.785994] kvm: disabled by bios
[    2.789348] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[    2.789379] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[    2.789408] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[    2.789434] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[    2.789463] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[    2.789489] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[    2.789515] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[    2.789541] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[    2.796942] intel_rapl: Found RAPL domain package
[    2.796943] intel_rapl: Found RAPL domain core
[    2.796943] intel_rapl: Found RAPL domain uncore
[    2.796946] intel_rapl: RAPL package 0 domain package locked by BIOS
[    2.839978] nvidia: loading out-of-tree module taints kernel.
[    2.839984] nvidia: module license 'NVIDIA' taints kernel.
[    2.839984] Disabling lock debugging due to kernel taint
[    2.844089] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.850973] nvidia-nvlink: Nvlink Core is being initialized, major device number 244
[    2.851164] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    2.851219] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  387.12  Thu Sep 28 20:18:48 PDT 2017 (using threaded interrupts)
[    2.858052] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  387.12  Thu Sep 28 19:30:23 PDT 2017
[    2.859062] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    2.859063] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[    2.906216] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[    3.004198] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[    3.063346] clocksource: Switched to clocksource tsc
[    3.120671] scsi 8:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 0 CCS
[    3.122169] sd 8:0:0:0: [sde] 31293440 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    3.122787] sd 8:0:0:0: [sde] Write Protect is off
[    3.122789] sd 8:0:0:0: [sde] Mode Sense: 23 00 00 00
[    3.123420] sd 8:0:0:0: [sde] No Caching mode page found
[    3.124091] sd 8:0:0:0: [sde] Assuming drive cache: write through
[    3.129414]  sde: sde1
[    3.132069] sd 8:0:0:0: [sde] Attached SCSI removable disk
[    3.184510] usbcore: registered new interface driver snd-usb-audio
[    3.208839] r8169 0000:03:00.0 enp3s0: link down
[    3.208842] r8169 0000:03:00.0 enp3s0: link down
[    3.208893] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    3.757633] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input14
[    3.757692] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input15
[    3.757739] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16
[    3.757783] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input17
[    5.985457] r8169 0000:03:00.0 enp3s0: link up
[    5.985467] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   31.047830] fuse init (API version 7.26)
[  201.491725] NVRM: Your system is not currently configured to drive a VGA console
               on the primary VGA device. The NVIDIA Linux graphics driver
               requires the use of a text-mode VGA console. Use of other console
               drivers including, but not limited to, vesafb, may result in
               corruption and stability problems, and is not supported.
[  201.492313] nvidia-modeset: Allocated GPU:0 (GPU-fd5873b2-5244-db06-cb37-41c60eb658a1) @ PCI:0000:01:00.0
[  201.580131] NVRM: GPU at PCI:0000:01:00: GPU-fd5873b2-5244-db06-cb37-41c60eb658a1
[  201.580141] NVRM: Xid (PCI:0000:01:00): 56, CMDre 00000000 0000085c 00010029 00000007 00000000
[  201.622307] NVRM: Xid (PCI:0000:01:00): 56, CMDre 00000000 0000085c 0001002b 00000007 00000000
[  201.622341] NVRM: Xid (PCI:0000:01:00): 56, CMDre 00000000 00000080 00000000 00000005 0000000b
[  201.625278] NVRM: Xid (PCI:0000:01:00): 32, Channel ID 00000001 intr 80004000
[  201.625400] NVRM: Xid (PCI:0000:01:00): 32, Channel ID 00000001 intr 80004000
[  201.856804] nvidia-modeset: Freed GPU:0 (GPU-fd5873b2-5244-db06-cb37-41c60eb658a1) @ PCI:0000:01:00.0

It does show some interesting (but for me puzzling) messages at around 201 seconds...

here the output of lspci -v :

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
	Subsystem: ASUSTeK Computer Inc. P8P67/P8H67 Series Motherboard
	Flags: bus master, fast devsel, latency 0
	Capabilities: <access denied>
	Kernel driver in use: snb_uncore

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0, IRQ 24
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000e000-0000efff [size=4K]
	Memory behind bridge: fa000000-fb0fffff [size=17M]
	Prefetchable memory behind bridge: 00000000e8000000-00000000f1ffffff [size=160M]
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
	Subsystem: ASUSTeK Computer Inc. P8 series motherboard
	Flags: bus master, fast devsel, latency 0, IRQ 39
	Memory at fb308000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me
	Kernel modules: mei_me

00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. P8 series motherboard
	Flags: bus master, medium devsel, latency 0, IRQ 23
	Memory at fb307000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
	Subsystem: ASUSTeK Computer Inc. P8H67 Series Motherboard
	Flags: bus master, fast devsel, latency 0, IRQ 41
	Memory at fb300000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0, IRQ 25
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: None
	Memory behind bridge: None
	Prefetchable memory behind bridge: None
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0, IRQ 26
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff [size=4K]
	Memory behind bridge: None
	Prefetchable memory behind bridge: 00000000f2100000-00000000f21fffff [size=1M]
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.5 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5) (prog-if 01 [Subtractive decode])
	Flags: bus master, fast devsel, latency 0, IRQ 11
	Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
	I/O behind bridge: None
	Memory behind bridge: None
	Prefetchable memory behind bridge: None
	Capabilities: <access denied>

00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b5) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0, IRQ 27
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff [size=4K]
	Memory behind bridge: fb200000-fb2fffff [size=1M]
	Prefetchable memory behind bridge: None
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0, IRQ 28
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
	I/O behind bridge: None
	Memory behind bridge: fb100000-fb1fffff [size=1M]
	Prefetchable memory behind bridge: None
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. P8 series motherboard
	Flags: bus master, medium devsel, latency 0, IRQ 23
	Memory at fb306000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1f.0 ISA bridge: Intel Corporation Z68 Express Chipset Family LPC Controller (rev 05)
	Subsystem: ASUSTeK Computer Inc. Z68 Express Chipset Family LPC Controller
	Flags: bus master, medium devsel, latency 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Desktop SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
	Subsystem: ASUSTeK Computer Inc. P8 series motherboard
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 37
	I/O ports at f070 [size=8]
	I/O ports at f060 [size=4]
	I/O ports at f050 [size=8]
	I/O ports at f040 [size=4]
	I/O ports at f020 [size=32]
	Memory at fb305000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
	Subsystem: ASUSTeK Computer Inc. P8 series motherboard
	Flags: medium devsel, IRQ 18
	Memory at fb304000 (64-bit, non-prefetchable) [size=256]
	I/O ports at f000 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801

01:00.0 VGA compatible controller: NVIDIA Corporation GF110 [GeForce GTX 580] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: ZOTAC International (MCO) Ltd. GF110 [GeForce GTX 580]
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
	Memory at e8000000 (64-bit, prefetchable) [size=128M]
	Memory at f0000000 (64-bit, prefetchable) [size=32M]
	I/O ports at e000 [size=128]
	Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nvidia
	Kernel modules: nouveau, nvidia_drm, nvidia

01:00.1 Audio device: NVIDIA Corporation GF110 High Definition Audio Controller (rev a1)
	Subsystem: ZOTAC International (MCO) Ltd. GF110 High Definition Audio Controller
	Flags: bus master, fast devsel, latency 0, IRQ 17
	Memory at fb080000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
	Subsystem: ASUSTeK Computer Inc. P8P67 and other motherboards
	Flags: bus master, fast devsel, latency 0, IRQ 40
	I/O ports at d000 [size=256]
	Memory at f2104000 (64-bit, prefetchable) [size=4K]
	Memory at f2100000 (64-bit, prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

04:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 01) (prog-if 01 [Subtractive decode])
	Flags: bus master, fast devsel, latency 0, IRQ 10
	Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
	I/O behind bridge: None
	Memory behind bridge: None
	Prefetchable memory behind bridge: None
	Capabilities: <access denied>

06:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01) (prog-if 01 [AHCI 1.0])
	Subsystem: ASUSTeK Computer Inc. ASM1062 Serial ATA Controller
	Flags: bus master, fast devsel, latency 0, IRQ 38
	I/O ports at c050 [size=8]
	I/O ports at c040 [size=4]
	I/O ports at c030 [size=8]
	I/O ports at c020 [size=4]
	I/O ports at c000 [size=32]
	Memory at fb200000 (32-bit, non-prefetchable) [size=512]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

07:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller (prog-if 30 [XHCI])
	Subsystem: ASUSTeK Computer Inc. P8B WS Motherboard
	Flags: bus master, fast devsel, latency 0, IRQ 19
	Memory at fb100000 (64-bit, non-prefetchable) [size=32K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

and here an Xorg log of an aborting session without any nvidia-related config in either /etc/X11/xorg.conf.d or /usr/share/X11/xorg.conf.d.
That config file was not put there by me so I have no idea why that intel stuff is there: I only found out today that there are also xorg.conf files in /usr/share/X11/xorg.conf.d, never touched that before..
Perhaps that file is part of a residue left there by packages that I have since uninstalled but that did mess up my config somehow.
[EDIT: thanks Progandy, for clearing that up ! This also means the log file below is perhaps not so interesting (it will just show why that file is there ); the relevant Xorg log is the one I posted in post #9 and has the GPU crash]

[   136.345] 
X.Org X Server 1.19.5
Release Date: 2017-10-12
[   136.347] X Protocol Version 11, Revision 0
[   136.348] Build Operating System: Linux 4.9.54-1-lts x86_64 
[   136.349] Current Operating System: Linux box 4.13.5-1-ARCH #1 SMP PREEMPT Fri Oct 6 09:58:47 CEST 2017 x86_64
[   136.349] Kernel command line: root=/dev/sdb3 rw initrd=/intel-ucode.img initrd=/initramfs-linux.img fbcon=rotate:3
[   136.352] Build Date: 12 October 2017  09:59:53PM
[   136.352]  
[   136.353] Current version of pixman: 0.34.0
[   136.355] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   136.355] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   136.358] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 31 21:08:49 2017
[   136.359] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   136.359] (==) No Layout section.  Using the first Screen section.
[   136.359] (==) No screen section available. Using defaults.
[   136.359] (**) |-->Screen "Default Screen Section" (0)
[   136.359] (**) |   |-->Monitor "<default monitor>"
[   136.360] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   136.360] (==) Automatically adding devices
[   136.360] (==) Automatically enabling devices
[   136.360] (==) Automatically adding GPU devices
[   136.360] (==) Automatically binding GPU devices
[   136.360] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   136.362] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   136.362] 	Entry deleted from font path.
[   136.362] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   136.362] 	Entry deleted from font path.
[   136.362] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   136.363] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   136.363] 	Entry deleted from font path.
[   136.363] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   136.363] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/
[   136.363] (==) ModulePath set to "/usr/lib/xorg/modules"
[   136.363] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   136.363] (II) Loader magic: 0x55cab8344d60
[   136.363] (II) Module ABI versions:
[   136.363] 	X.Org ANSI C Emulation: 0.4
[   136.363] 	X.Org Video Driver: 23.0
[   136.363] 	X.Org XInput driver : 24.1
[   136.363] 	X.Org Server Extension : 10.0
[   136.363] (++) using VT number 1

[   136.363] (--) controlling tty is VT number 1, auto-enabling KeepTty
[   136.365] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[   136.366] (II) xfree86: Adding drm device (/dev/dri/card0)
[   136.366] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[   136.368] (--) PCI:*(0:1:0:0) 10de:1080:19da:2203 rev 161, Mem @ 0xfa000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[   136.368] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   136.368] (II) LoadModule: "glx"
[   136.369] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   136.377] (II) Module glx: vendor="X.Org Foundation"
[   136.377] 	compiled for 1.19.5, module version = 1.0.0
[   136.377] 	ABI class: X.Org Server Extension, version 10.0
[   136.377] (==) Matched nouveau as autoconfigured driver 0
[   136.377] (==) Matched nv as autoconfigured driver 1
[   136.377] (==) Matched nouveau as autoconfigured driver 2
[   136.377] (==) Matched nv as autoconfigured driver 3
[   136.377] (==) Matched modesetting as autoconfigured driver 4
[   136.377] (==) Matched fbdev as autoconfigured driver 5
[   136.377] (==) Matched vesa as autoconfigured driver 6
[   136.377] (==) Assigned the driver to the xf86ConfigLayout
[   136.377] (II) LoadModule: "nouveau"
[   136.378] (WW) Warning, couldn't open module nouveau
[   136.378] (II) UnloadModule: "nouveau"
[   136.378] (II) Unloading nouveau
[   136.378] (EE) Failed to load module "nouveau" (module does not exist, 0)
[   136.378] (II) LoadModule: "nv"
[   136.378] (WW) Warning, couldn't open module nv
[   136.378] (II) UnloadModule: "nv"
[   136.378] (II) Unloading nv
[   136.378] (EE) Failed to load module "nv" (module does not exist, 0)
[   136.378] (II) LoadModule: "modesetting"
[   136.378] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   136.379] (II) Module modesetting: vendor="X.Org Foundation"
[   136.379] 	compiled for 1.19.5, module version = 1.19.5
[   136.379] 	Module class: X.Org Video Driver
[   136.379] 	ABI class: X.Org Video Driver, version 23.0
[   136.379] (II) LoadModule: "fbdev"
[   136.379] (WW) Warning, couldn't open module fbdev
[   136.379] (II) UnloadModule: "fbdev"
[   136.379] (II) Unloading fbdev
[   136.379] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   136.379] (II) LoadModule: "vesa"
[   136.379] (WW) Warning, couldn't open module vesa
[   136.379] (II) UnloadModule: "vesa"
[   136.379] (II) Unloading vesa
[   136.379] (EE) Failed to load module "vesa" (module does not exist, 0)
[   136.379] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   136.379] (WW) Falling back to old probe method for modesetting
[   136.379] (EE) Screen 0 deleted because of no matching config section.
[   136.379] (II) UnloadModule: "modesetting"
[   136.379] (EE) Device(s) detected, but none match those in the config file.
[   136.379] (EE) 
Fatal server error:
[   136.379] (EE) no screens found(EE) 
[   136.379] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   136.379] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   136.379] (EE) 
[   136.381] (EE) Server terminated with error (1). Closing log file.

Last edited by nourathar (2017-10-31 20:34:36)

nourathar · 2017-11-04 17:58:20

Hello,

here I am again, in a more drastic mode.

Today I removed every package I could find that has some link to nvidia or xorg, and my problem persists: the nouveau driver reports a GPU lockup. So now it is obvious that is not related to any conflict between nouveau and nvidia drivers, since I removed everything related to nvidia.

As a last resort before reinstalling Arch I booted from a USB key, and it reports the same problem.
I used this .iso about three weeks ago to install my current system and it definitely did not report this error then.

Below the output of dmesg | grep nouveau after booting from a rather fresh Arch install .iso:

[    4.395854] fb: switching to nouveaufb from EFI VGA
[    4.395945] nouveau 0000:01:00.0: NVIDIA GF110 (0c8000a1)
[    4.545537] nouveau 0000:01:00.0: bios: version 70.10.48.00.01
[    4.568217] nouveau 0000:01:00.0: fb: 3072 MiB GDDR5
[    4.624931] nouveau 0000:01:00.0: DRM: VRAM: 3072 MiB
[    4.624931] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    4.624933] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    4.624934] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    4.624935] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000000
[    4.624936] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030
[    4.624936] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011380 00000000
[    4.624937] nouveau 0000:01:00.0: DRM: DCB outp 03: 08011382 00020030
[    4.624938] nouveau 0000:01:00.0: DRM: DCB outp 04: 02022362 00020010
[    4.624939] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[    4.624939] nouveau 0000:01:00.0: DRM: DCB conn 01: 00010130
[    4.624940] nouveau 0000:01:00.0: DRM: DCB conn 02: 00002261
[    4.707875] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[    4.899109] nouveau 0000:01:00.0: DRM: allocated 1920x1200 fb: 0x60000, bo ffff90bd8cb25800
[    4.899167] nouveau 0000:01:00.0: fifo: read fault at 0000985000 engine 00 [PGRAPH] client 05 [CTXCTL] reason 02 [PAGE_NOT_PRESENT] on channel 1 [00bfb6f000 DRM]
[    4.899172] nouveau 0000:01:00.0: fifo: gr engine fault on channel 1, recovering...
[    4.900091] fbcon: nouveaufb (fb0) is primary device
[    4.942882] nouveau 0000:01:00.0: DRM: channel 1 killed!
[    5.396006] nouveau 0000:01:00.0: DRM: GPU lockup - switching to software fbcon
[    5.401109] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    5.430053] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0

my question is now the following:
given that this happens from an install .iso, is there any chance my problem is not hardware related ?
is there any way to reset/ clear an Nvidia GPU ? I did already remove it from its socket some time last week...

thanks for any insights !

seth · 2017-11-04 19:57:41

[  201.580131] NVRM: GPU at PCI:0000:01:00: GPU-fd5873b2-5244-db06-cb37-41c60eb658a1
[  201.580141] NVRM: Xid (PCI:0000:01:00): 56, CMDre 00000000 0000085c 00010029 00000007 00000000
[  201.622307] NVRM: Xid (PCI:0000:01:00): 56, CMDre 00000000 0000085c 0001002b 00000007 00000000
[  201.622341] NVRM: Xid (PCI:0000:01:00): 56, CMDre 00000000 00000080 00000000 00000005 0000000b
[  201.625278] NVRM: Xid (PCI:0000:01:00): 32, Channel ID 00000001 intr 80004000
[  201.625400] NVRM: Xid (PCI:0000:01:00): 32, Channel ID 00000001 intr 80004000
[  201.856804] nvidia-modeset: Freed GPU:0 (GPU-fd5873b2-5244-db06-cb37-41c60eb658a1) @ PCI:0000:01:00.0

http://docs.nvidia.com/deploy/xid-errors/index.html

Xid 56 can refer to either a hardware or driver issue, 32 is gonna be a follow up issue.
Since this happened more or less spontanously (I don't buy midori being involved, that's just some client software), I'm afraid "hardware", but you could check another live system (preferably with an older kernel)
A regular "hardware" issue is underpowerage (notably if the GPU has dedicated power supply next to PCIe, ie. a 6/8 pin slot)

nourathar · 2017-11-04 20:20:39

currently sailing on with an old ATI card I had lying around, assuming it was hardware problem and marking this as solved.

(I do have a system with an older kernel at work where I will check the card to be really sure).

thanks !

Last edited by nourathar (2017-11-04 20:22:57)

Arch Linux

#1 2017-10-30 10:03:54

[solved] GPU exception with Nvidia driver

#2 2017-10-31 11:07:25

Re: [solved] GPU exception with Nvidia driver

#3 2017-10-31 12:03:49

Re: [solved] GPU exception with Nvidia driver

#4 2017-10-31 12:07:54

Re: [solved] GPU exception with Nvidia driver

#5 2017-10-31 13:27:58

Re: [solved] GPU exception with Nvidia driver

#6 2017-10-31 14:32:03

Re: [solved] GPU exception with Nvidia driver

#7 2017-10-31 18:32:46

Re: [solved] GPU exception with Nvidia driver

#8 2017-10-31 18:36:07

Re: [solved] GPU exception with Nvidia driver

#9 2017-10-31 19:31:58

Re: [solved] GPU exception with Nvidia driver

#10 2017-10-31 19:44:04

Re: [solved] GPU exception with Nvidia driver

#11 2017-10-31 19:58:56

Re: [solved] GPU exception with Nvidia driver

#12 2017-10-31 20:14:05

Re: [solved] GPU exception with Nvidia driver

#13 2017-10-31 20:22:46

Re: [solved] GPU exception with Nvidia driver

#14 2017-10-31 20:23:32

Re: [solved] GPU exception with Nvidia driver

#15 2017-11-04 17:58:20

Re: [solved] GPU exception with Nvidia driver

#16 2017-11-04 19:57:41

Re: [solved] GPU exception with Nvidia driver

#17 2017-11-04 20:20:39

Re: [solved] GPU exception with Nvidia driver

Board footer