You are not logged in.

Pages: 1

#1 2017-10-31 11:54:33

quiddi
Member
Registered: 2016-12-01
Posts: 12

HP ProBook 640G1 busy at starting

Hi guys,

I'm running out of ideas. I'm having a ProBook from HP and sometimes it boots and sometimes not. If it is not booting it stucks at Reached target Graphical Interface. My first idea was that there is a bug in the b43-firmware, because in teh dmesg was written:

bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21f1.hcd failed with error -2

I fixed it, but the laptop is still busy sometimes with itself at the booting process.
Has anybody an idea? Here is the dmesg:

[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x4b7 with crng_init=0
[    0.000000] Linux version 4.13.9-1-ARCH (builduser@tobias) (gcc version 7.2.0 (GCC)) #1 SMP PREEMPT Sun Oct 22 09:07:32 CEST 2017
[    0.000000] Command line: initrd=\initramfs-linux.img root=LABEL=p_arch rw resume=p_swap
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000097fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000098000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009cb7efff] usable
[    0.000000] BIOS-e820: [mem 0x000000009cb7f000-0x000000009de7efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009de7f000-0x000000009df7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009df7f000-0x000000009dffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009dfff000-0x000000009dffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff810000-0x00000000ff82efff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x9158a018-0x9159a057] usable ==> usable
[    0.000000] e820: update [mem 0x9158a018-0x9159a057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x0000000000097fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000098000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000009158a017] usable
[    0.000000] reserve setup_data: [mem 0x000000009158a018-0x000000009159a057] usable
[    0.000000] reserve setup_data: [mem 0x000000009159a058-0x000000009cb7efff] usable
[    0.000000] reserve setup_data: [mem 0x000000009cb7f000-0x000000009de7efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000009de7f000-0x000000009df7efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000009df7f000-0x000000009dffefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000009dfff000-0x000000009dffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff810000-0x00000000ff82efff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000043fdfffff] usable
[    0.000000] efi: EFI v2.10 by HPQ
[    0.000000] efi:  ACPI=0x9dffe000  ACPI 2.0=0x9dffe014  SMBIOS=0x9d32e198 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP ProBook 640 G1/1993, BIOS L77 Ver. 01.20 07/17/2014
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x43fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00FF800000 mask 7FFF800000 write-protect
[    0.000000]   1 base 0000000000 mask 7F80000000 write-back
[    0.000000]   2 base 0080000000 mask 7FE0000000 write-back
[    0.000000]   3 base 009F000000 mask 7FFF000000 uncachable
[    0.000000]   4 base 0100000000 mask 7F00000000 write-back
[    0.000000]   5 base 0200000000 mask 7E00000000 write-back
[    0.000000]   6 base 0400000000 mask 7FC0000000 write-back
[    0.000000]   7 base 043FE00000 mask 7FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x9e000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff9b3e40077000] 77000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x80d64000, 0x80d64fff] PGTABLE
[    0.000000] BRK [0x80d65000, 0x80d65fff] PGTABLE
[    0.000000] BRK [0x80d66000, 0x80d66fff] PGTABLE
[    0.000000] BRK [0x80d67000, 0x80d67fff] PGTABLE
[    0.000000] BRK [0x80d68000, 0x80d68fff] PGTABLE
[    0.000000] BRK [0x80d69000, 0x80d69fff] PGTABLE
[    0.000000] Secure boot disabled
[    0.000000] RAMDISK: [mem 0x7f96a000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000009DFFE014 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x000000009DFFE120 0000A4 (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009DFFC000 00010C (v05 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: DSDT 0x000000009DFD2000 024BB9 (v02 HPQOEM 1993     00000001 INTL 20110112)
[    0.000000] ACPI: FACS 0x000000009DE31000 000040
[    0.000000] ACPI: FACS 0x000000009DE31000 000040
[    0.000000] ACPI: HPET 0x000000009DFFB000 000038 (v01 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: APIC 0x000000009DFFA000 0000BC (v01 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 0x000000009DFF9000 00003C (v01 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: ASF! 0x000000009DFF8000 0000A5 (v32 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: TCPA 0x000000009DFF7000 000032 (v02 HPQOEM 1993     00000000 HP   00000001)
[    0.000000] ACPI: SSDT 0x000000009DFCF000 000466 (v01 HPQOEM SataAhci 00001000 INTL 20110112)
[    0.000000] ACPI: SSDT 0x000000009DFCE000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
[    0.000000] ACPI: SLIC 0x000000009DFCD000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
[    0.000000] ACPI: MSDM 0x000000009DFCC000 000055 (v03 HPQOEM SLIC-MPC 00000000 HP   00000001)
[    0.000000] ACPI: FPDT 0x000000009DFCB000 000044 (v01 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: BGRT 0x000000009DFCA000 000038 (v00 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 0x000000009DFC6000 000544 (v01 PmRef  Cpu0Ist  00003000 INTL 20110112)
[    0.000000] ACPI: SSDT 0x000000009DFC5000 000AF3 (v01 PmRef  CpuPm    00003000 INTL 20110112)
[    0.000000] ACPI: SSDT 0x000000009DFC4000 0001D5 (v01 PmRef  LakeTiny 00003000 INTL 20110112)
[    0.000000] ACPI: SSDT 0x000000009DFC3000 000706 (v01 SaSsdt SaSsdt   00003000 INTL 20110112)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000043fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x43fdf9000-0x43fdfdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000043fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x0000000000097fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000009cb7efff]
[    0.000000]   node   0: [mem 0x000000009dfff000-0x000000009dffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000043fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043fdfffff]
[    0.000000] On node 0 totalpages: 4049174
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 1072 pages reserved
[    0.000000]   DMA zone: 3990 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9966 pages used for memmap
[    0.000000]   DMA32 zone: 637824 pages, LIFO batch:31
[    0.000000]   Normal zone: 53240 pages used for memmap
[    0.000000]   Normal zone: 3407360 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000009f200000-0x00000000bf1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later)
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9158a000-0x9158afff]
[    0.000000] PM: Registered nosave memory: [mem 0x9159a000-0x9159afff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cb7f000-0x9de7efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9de7f000-0x9df7efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9df7f000-0x9dffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9f1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9f200000-0xbf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf200000-0xe00f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff80ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff810000-0xff82efff]
[    0.000000] PM: Registered nosave memory: [mem 0xff82f000-0xffffffff]
[    0.000000] e820: [mem 0xbf200000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff9b427fa00000 s106520 r8192 d32744 u262144
[    0.000000] pcpu-alloc: s106520 r8192 d32744 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 3984832
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: initrd=\initramfs-linux.img root=LABEL=p_arch rw resume=p_swap
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 15756040K/16196696K available (6644K kernel code, 1134K rwdata, 2048K rodata, 1336K init, 908K bss, 440656K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 28353 entries in 111 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 8448, nr_irqs: 488, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 2494.297 MHz processor
[    0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.45 BogoMIPS (lpj=8314323)
[    0.003333] pid_max: default: 32768 minimum: 301
[    0.003333] ACPI: Core revision 20170531
[    0.014389] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.021237] Security Framework initialized
[    0.021238] Yama: becoming mindful.
[    0.023721] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.024997] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.025046] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.025086] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.025256] CPU: Physical Processor ID: 0
[    0.025256] CPU: Processor Core ID: 0
[    0.025260] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.025260] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.025264] mce: CPU supports 7 MCE banks
[    0.025272] CPU0: Thermal monitoring enabled (TM1)
[    0.025282] process: using mwait in idle threads
[    0.025285] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.025285] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.025375] Freeing SMP alternatives memory: 24K
[    0.031974] smpboot: Max logical packages: 4
[    0.032377] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.066666] smpboot: CPU0: Intel(R) Core(TM) i5-4200M CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.076685] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.076716] ... version:                3
[    0.076717] ... bit width:              48
[    0.076717] ... generic registers:      4
[    0.076718] ... value mask:             0000ffffffffffff
[    0.076718] ... max period:             00007fffffffffff
[    0.076719] ... fixed-purpose events:   3
[    0.076719] ... event mask:             000000070000000f
[    0.083349] Hierarchical SRCU implementation.
[    0.096793] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.103348] smp: Bringing up secondary CPUs ...
[    0.130024] x86: Booting SMP configuration:
[    0.130025] .... node  #0, CPUs:      #1 #2 #3
[    0.433351] smp: Brought up 1 node, 4 CPUs
[    0.433351] smpboot: Total of 4 processors activated (19961.30 BogoMIPS)
[    0.436788] devtmpfs: initialized
[    0.436788] x86/mm: Memory block size: 128MB
[    0.437669] PM: Registering ACPI NVS region [mem 0x9de7f000-0x9df7efff] (1048576 bytes)
[    0.437669] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.437669] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.437669] pinctrl core: initialized pinctrl subsystem
[    0.437669] RTC time: 11:42:58, date: 10/31/17
[    0.437669] NET: Registered protocol family 16
[    0.437669] cpuidle: using governor ladder
[    0.437669] cpuidle: using governor menu
[    0.437669] PCCT header not found.
[    0.437669] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.437669] ACPI: bus type PCI registered
[    0.437669] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.437669] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.437669] PCI: not using MMCONFIG
[    0.437669] PCI: Using configuration type 1 for base access
[    0.437669] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.437669] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.437669] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.437669] ACPI: Added _OSI(Module Device)
[    0.437669] ACPI: Added _OSI(Processor Device)
[    0.437669] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.437669] ACPI: Added _OSI(Processor Aggregator Device)
[    0.444556] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.449355] ACPI: Dynamic OEM Table Load:
[    0.449362] ACPI: SSDT 0xFFFF9B426DA88400 0003F3 (v01 PmRef  Cpu0Cst  00003001 INTL 20110112)
[    0.449638] ACPI: Dynamic OEM Table Load:
[    0.449643] ACPI: SSDT 0xFFFF9B426DB2D800 0005DB (v01 PmRef  ApIst    00003000 INTL 20110112)
[    0.449941] ACPI: Dynamic OEM Table Load:
[    0.449945] ACPI: SSDT 0xFFFF9B426DA83C00 000119 (v01 PmRef  ApCst    00003000 INTL 20110112)
[    0.450666] ACPI: EC: EC started
[    0.450667] ACPI: EC: interrupt blocked
[    1.933569] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    1.933570] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    1.933572] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    1.933572] ACPI: Interpreter enabled
[    1.933597] ACPI: (supports S0 S3 S4 S5)
[    1.933598] ACPI: Using IOAPIC for interrupt routing
[    1.933614] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    1.933929] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    1.933941] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.935514] ACPI: Power Resource [APPR] (off)
[    1.937762] ACPI: Power Resource [COMP] (off)
[    1.938164] ACPI: Power Resource [LPP] (on)
[    1.941182] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    1.941187] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.942504] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    1.942505] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    1.942921] PCI host bridge to bus 0000:00
[    1.942923] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.942924] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.942925] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.942926] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff window]
[    1.942927] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff window]
[    1.942928] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff window]
[    1.942929] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
[    1.942930] pci_bus 0000:00: root bus resource [bus 00-fe]
[    1.942937] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    1.943043] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    1.943053] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
[    1.943058] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.943062] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    1.943168] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    1.943175] pci 0000:00:03.0: reg 0x10: [mem 0xd0730000-0xd0733fff 64bit]
[    1.943291] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    1.943309] pci 0000:00:14.0: reg 0x10: [mem 0xd0720000-0xd072ffff 64bit]
[    1.943366] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    1.943452] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    1.943472] pci 0000:00:16.0: reg 0x10: [mem 0xd0739000-0xd073900f 64bit]
[    1.943535] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.943622] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
[    1.943639] pci 0000:00:19.0: reg 0x10: [mem 0xd0700000-0xd071ffff]
[    1.943647] pci 0000:00:19.0: reg 0x14: [mem 0xd073f000-0xd073ffff]
[    1.943654] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
[    1.943712] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    1.943796] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    1.943816] pci 0000:00:1a.0: reg 0x10: [mem 0xd073e000-0xd073e3ff]
[    1.943899] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.943983] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    1.944000] pci 0000:00:1b.0: reg 0x10: [mem 0xd0734000-0xd0737fff 64bit]
[    1.944060] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.944148] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    1.944219] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.944338] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[    1.944409] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    1.944520] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
[    1.944592] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    1.944703] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    1.944724] pci 0000:00:1d.0: reg 0x10: [mem 0xd073d000-0xd073d3ff]
[    1.944807] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.944895] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
[    1.945079] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    1.945095] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
[    1.945102] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
[    1.945108] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
[    1.945115] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
[    1.945122] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    1.945129] pci 0000:00:1f.2: reg 0x24: [mem 0xd073c000-0xd073c7ff]
[    1.945166] pci 0000:00:1f.2: PME# supported from D3hot
[    1.945244] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    1.945259] pci 0000:00:1f.3: reg 0x10: [mem 0xd0738000-0xd07380ff 64bit]
[    1.945273] pci 0000:00:1f.3: reg 0x20: [io  0xef80-0xef9f]
[    1.945401] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.945406] pci 0000:00:1c.0:   bridge window [mem 0xd0600000-0xd06fffff]
[    1.945462] pci 0000:02:00.0: [14e4:4359] type 00 class 0x028000
[    1.945496] pci 0000:02:00.0: reg 0x10: [mem 0xd0500000-0xd0503fff 64bit]
[    1.945627] pci 0000:02:00.0: supports D1 D2
[    1.945628] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.953356] pci 0000:00:1c.6: PCI bridge to [bus 02]
[    1.953361] pci 0000:00:1c.6:   bridge window [mem 0xd0500000-0xd05fffff]
[    1.953444] pci 0000:03:00.0: [10ec:5227] type 00 class 0xff0000
[    1.953544] pci 0000:03:00.0: reg 0x10: [mem 0xd0400000-0xd0400fff]
[    1.953912] pci 0000:03:00.0: supports D1 D2
[    1.953913] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    1.963361] pci 0000:00:1c.7: PCI bridge to [bus 03]
[    1.963365] pci 0000:00:1c.7:   bridge window [mem 0xd0400000-0xd04fffff]
[    1.964193] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.964232] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.964270] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.964307] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.964344] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.964380] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.964417] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.964453] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.964698] ACPI: Enabled 5 GPEs in block 00 to 3F
[    1.964753] ACPI: EC: interrupt unblocked
[    1.964758] ACPI: EC: event unblocked
[    1.964772] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    1.964774] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    1.964822] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    1.964822] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.964822] pci 0000:00:02.0: vgaarb: bridge control possible
[    1.964822] vgaarb: loaded
[    1.964822] EDAC MC: Ver: 3.0.0
[    1.964822] Registered efivars operations
[    2.060378] PCI: Using ACPI for IRQ routing
[    2.065916] PCI: pci_cache_line_size set to 64 bytes
[    2.065966] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    2.065967] e820: reserve RAM buffer [mem 0x00098000-0x0009ffff]
[    2.065968] e820: reserve RAM buffer [mem 0x9158a018-0x93ffffff]
[    2.065969] e820: reserve RAM buffer [mem 0x9cb7f000-0x9fffffff]
[    2.065970] e820: reserve RAM buffer [mem 0x9e000000-0x9fffffff]
[    2.065971] e820: reserve RAM buffer [mem 0x43fe00000-0x43fffffff]
[    2.066039] NetLabel: Initializing
[    2.066040] NetLabel:  domain hash size = 128
[    2.066040] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    2.066052] NetLabel:  unlabeled traffic allowed by default
[    2.066063] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    2.066063] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    2.067684] clocksource: Switched to clocksource hpet
[    2.074163] VFS: Disk quotas dquot_6.6.0
[    2.074181] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.074248] pnp: PnP ACPI init
[    2.074437] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    2.074438] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    2.074440] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    2.074441] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    2.074442] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
[    2.074443] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    2.074444] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    2.074445] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    2.074446] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    2.074448] system 00:00: [mem 0xbf210000-0xbf21ffff] has been reserved
[    2.074451] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.074625] system 00:01: [io  0x0200-0x027f] has been reserved
[    2.074626] system 00:01: [io  0xffff] has been reserved
[    2.074627] system 00:01: [io  0xffff] has been reserved
[    2.074628] system 00:01: [io  0xffff] has been reserved
[    2.074629] system 00:01: [io  0x1800-0x18fe] has been reserved
[    2.074630] system 00:01: [io  0xef80-0xef9f] has been reserved
[    2.074632] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.074670] system 00:02: [io  0x0800-0x087f] has been reserved
[    2.074672] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.074690] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    2.075026] pnp 00:04: [dma 0 disabled]
[    2.075077] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[    2.075093] pnp 00:05: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    2.075108] pnp 00:06: Plug and Play ACPI device, IDs SYN3002 SYN0100 SYN0002 PNP0f13 (active)
[    2.075359] system 00:07: [mem 0x20000000-0x201fffff] could not be reserved
[    2.075360] system 00:07: [mem 0x40004000-0x40004fff] could not be reserved
[    2.075362] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    2.075531] pnp 00:08: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[    2.075544] pnp: PnP ACPI: found 9 devices
[    2.081511] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    2.081535] pci 0000:00:1c.7: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    2.081537] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    2.081546] pci 0000:00:1c.7: BAR 15: assigned [mem 0xbf300000-0xbf4fffff 64bit pref]
[    2.081548] pci 0000:00:1c.7: BAR 13: assigned [io  0x2000-0x2fff]
[    2.081550] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    2.081554] pci 0000:00:1c.0:   bridge window [mem 0xd0600000-0xd06fffff]
[    2.081561] pci 0000:00:1c.6: PCI bridge to [bus 02]
[    2.081566] pci 0000:00:1c.6:   bridge window [mem 0xd0500000-0xd05fffff]
[    2.081572] pci 0000:00:1c.7: PCI bridge to [bus 03]
[    2.081575] pci 0000:00:1c.7:   bridge window [io  0x2000-0x2fff]
[    2.081578] pci 0000:00:1c.7:   bridge window [mem 0xd0400000-0xd04fffff]
[    2.081582] pci 0000:00:1c.7:   bridge window [mem 0xbf300000-0xbf4fffff 64bit pref]
[    2.081587] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    2.081588] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    2.081589] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    2.081590] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff window]
[    2.081591] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff window]
[    2.081592] pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff window]
[    2.081593] pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff window]
[    2.081594] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff]
[    2.081595] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
[    2.081596] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    2.081597] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff]
[    2.081598] pci_bus 0000:03: resource 2 [mem 0xbf300000-0xbf4fffff 64bit pref]
[    2.081684] NET: Registered protocol family 2
[    2.081834] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    2.081991] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    2.082101] TCP: Hash tables configured (established 131072 bind 65536)
[    2.082134] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    2.082170] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    2.082234] NET: Registered protocol family 1
[    2.082245] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    2.082253] pci 0000:00:14.0: enabling device (0000 -> 0002)
[    2.082783] PCI: CLS 64 bytes, default 64
[    2.082816] Unpacking initramfs...
[    2.183730] Freeing initrd memory: 6740K
[    2.183733] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.183735] software IO TLB [mem 0x94efd000-0x98efd000] (64MB) mapped at [ffff9b3ed4efd000-ffff9b3ed8efcfff]
[    2.183894] Scanning for low memory corruption every 60 seconds
[    2.184367] Initialise system trusted keyrings
[    2.184374] Key type blacklist registered
[    2.184414] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    2.185241] zbud: loaded
[    2.186526] Key type asymmetric registered
[    2.186557] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.186589] io scheduler noop registered
[    2.186590] io scheduler deadline registered
[    2.186612] io scheduler cfq registered (default)
[    2.186613] io scheduler mq-deadline registered
[    2.186613] io scheduler kyber registered
[    2.186632] io scheduler bfq registered
[    2.187222] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[    2.187238] pcieport 0000:00:1c.6: Signaling PME with IRQ 25
[    2.187254] pcieport 0000:00:1c.7: Signaling PME with IRQ 26
[    2.187269] pciehp 0000:00:1c.7:pcie004: Slot #7 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    2.187302] efifb: probing for efifb
[    2.187312] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
[    2.187313] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    2.187314] efifb: scrolling: redraw
[    2.187315] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.188782] Console: switching to colour frame buffer device 128x48
[    2.190170] fb0: EFI VGA frame buffer device
[    2.190175] intel_idle: MWAIT substates: 0x42120
[    2.190176] intel_idle: v0.4.1 model 0x3C
[    2.190301] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.190440] GHES: HEST is not enabled!
[    2.190501] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.191167] rtc_cmos 00:03: RTC can wake from S4
[    2.191281] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    2.191304] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.191312] intel_pstate: Intel P-state driver initializing
[    2.191509] ledtrig-cpu: registered to indicate activity on CPUs
[    2.191568] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    2.192067] NET: Registered protocol family 10
[    2.199723] Segment Routing with IPv6
[    2.199773] NET: Registered protocol family 17
[    2.200335] RAS: Correctable Errors collector initialized.
[    2.200410] microcode: sig=0x306c3, pf=0x10, revision=0x16
[    2.200578] microcode: Microcode Update Driver: v2.2.
[    2.200597] sched_clock: Marking stable (2200565575, 0)->(2320258212, -119692637)
[    2.201118] registered taskstats version 1
[    2.201139] Loading compiled-in X.509 certificates
[    2.201174] zswap: loaded using pool lzo/zbud
[    2.205704] Key type big_key registered
[    2.206060]   Magic number: 5:206:733
[    2.206161] rtc_cmos 00:03: setting system clock to 2017-10-31 11:43:00 UTC (1509450180)
[    2.206790] PM: Checking hibernation image partition p_swap
[    2.206793] PM: Hibernation image not present or could not be loaded.
[    2.207999] Freeing unused kernel memory: 1336K
[    2.208000] Write protecting the kernel read-only data: 10240k
[    2.208367] Freeing unused kernel memory: 1536K
[    2.417466] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.418703] i8042: Detected active multiplexing controller, rev 1.1
[    2.419362] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.419402] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.419430] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.419457] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.419483] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.421800] ACPI: bus type USB registered
[    2.421814] usbcore: registered new interface driver usbfs
[    2.421818] usbcore: registered new interface driver hub
[    2.421843] usbcore: registered new device driver usb
[    2.422313] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.422851] ehci-pci: EHCI PCI platform driver
[    2.423029] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.423035] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.423045] ehci-pci 0000:00:1a.0: debug port 2
[    2.424576] SCSI subsystem initialized
[    2.425799] libata version 3.00 loaded.
[    2.426943] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.426957] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd073e000
[    2.440054] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.440236] hub 1-0:1.0: USB hub found
[    2.440242] hub 1-0:1.0: 2 ports detected
[    2.440555] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.440560] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.440571] ehci-pci 0000:00:1d.0: debug port 2
[    2.444457] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.444467] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd073d000
[    2.456692] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.456964] hub 2-0:1.0: USB hub found
[    2.456970] hub 2-0:1.0: 2 ports detected
[    2.457342] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.457350] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    2.458445] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    2.458451] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.458672] hub 3-0:1.0: USB hub found
[    2.458692] hub 3-0:1.0: 14 ports detected
[    2.459296] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.459299] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    2.459451] hub 4-0:1.0: USB hub found
[    2.459470] hub 4-0:1.0: 6 ports detected
[    2.459759] usb: port power management may be unreliable
[    2.459850] ahci 0000:00:1f.2: version 3.0
[    2.460093] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.460129] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x37 impl SATA mode
[    2.460132] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst 
[    2.462604] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.501074] scsi host0: ahci
[    2.501294] scsi host1: ahci
[    2.501658] scsi host2: ahci
[    2.501952] scsi host3: ahci
[    2.502246] scsi host4: ahci
[    2.502467] scsi host5: ahci
[    2.502591] ata1: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c100 irq 29
[    2.502596] ata2: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c180 irq 29
[    2.502601] ata3: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c200 irq 29
[    2.502603] ata4: DUMMY
[    2.502607] ata5: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c300 irq 29
[    2.502610] ata6: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c380 irq 29
[    2.760104] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.776770] usb 3-5: new full-speed USB device number 2 using xhci_hcd
[    2.776797] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.818141] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.819221] ata1.00: NCQ Send/Recv Log not supported
[    2.819226] ata1.00: ATA-9: Samsung SSD 840 Series, DXT06B0Q, max UDMA/133
[    2.819230] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.819302] ata1.00: READ LOG DMA EXT failed, trying PIO
[    2.819388] ata1.00: failed to get Identify Device Data, Emask 0x1
[    2.820021] ata1.00: NCQ Send/Recv Log not supported
[    2.820068] ata1.00: failed to get Identify Device Data, Emask 0x1
[    2.820076] ata1.00: configured for UDMA/133
[    2.820478] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  6B0Q PQ: 0 ANSI: 5
[    2.898023] hub 1-1:1.0: USB hub found
[    2.898136] hub 1-1:1.0: 6 ports detected
[    2.914588] hub 2-1:1.0: USB hub found
[    2.914774] hub 2-1:1.0: 8 ports detected
[    3.076765] usb 3-7: new high-speed USB device number 3 using xhci_hcd
[    3.171603] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.172620] ata2.00: ATA-9: WDC WD5000BPVX-00JC3T0, 01.01A01, max UDMA/133
[    3.172625] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    3.173762] ata2.00: configured for UDMA/133
[    3.174212] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000BPVX-0 1A01 PQ: 0 ANSI: 5
[    3.200070] tsc: Refined TSC clocksource calibration: 2494.223 MHz
[    3.200085] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3e8602d1, max_idle_ns: 440795241926 ns
[    3.433431] usb 3-12: new full-speed USB device number 4 using xhci_hcd
[    3.534902] ata3: SATA link down (SStatus 0 SControl 300)
[    3.848266] ata5: SATA link down (SStatus 0 SControl 300)
[    4.161629] ata6: SATA link down (SStatus 0 SControl 300)
[    4.169383] ata1.00: Enabling discard_zeroes_data
[    4.169517] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    4.169519] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    4.169530] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    4.169537] sd 1:0:0:0: [sdb] Write Protect is off
[    4.169541] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    4.169550] sd 0:0:0:0: [sda] Write Protect is off
[    4.169553] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.169574] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.169588] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.169777] ata1.00: Enabling discard_zeroes_data
[    4.171498]  sda: sda1 sda3 sda4 sda5 sda6
[    4.172138] ata1.00: Enabling discard_zeroes_data
[    4.172359] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.213540] clocksource: Switched to clocksource tsc
[    4.216440]  sdb: sdb1
[    4.217368] sd 1:0:0:0: [sdb] Attached SCSI disk
[    4.575695] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    4.658186] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.662403] systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    4.662533] systemd[1]: Detected architecture x86-64.
[    4.662905] systemd[1]: Set hostname to <quiddi_hp_640>.
[    4.734303] systemd[1]: Reached target Remote File Systems.
[    4.734523] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.734944] systemd[1]: Created slice User and Session Slice.
[    4.735032] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.735119] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.735187] systemd[1]: Reached target Local Encrypted Volumes.
[    4.735244] systemd[1]: Reached target System Time Synchronized.
[    4.745878] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[    4.757657] vboxdrv: loading out-of-tree module taints kernel.
[    4.759137] vboxdrv: Found 4 processor cores
[    4.776832] vboxdrv: TSC mode is Invariant, tentative frequency 2494212089 Hz
[    4.776834] vboxdrv: Successfully loaded version 5.2.0 (interface 0x00290000)
[    4.777688] VBoxPciLinuxInit
[    4.780607] vboxpci: IOMMU not found (not registered)
[    4.781200] VBoxNetAdp: Successfully started.
[    4.782013] VBoxNetFlt: Successfully started.
[    4.798054] systemd-journald[216]: Received request to flush runtime journal from PID 1
[    4.951321] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170531/utaddress-247)
[    4.951332] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.951348] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20170531/utaddress-247)
[    4.951355] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.951362] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20170531/utaddress-247)
[    4.951365] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20170531/utaddress-247)
[    4.951369] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.951373] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20170531/utaddress-247)
[    4.951376] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20170531/utaddress-247)
[    4.951379] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20170531/utaddress-247)
[    4.951383] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000080F (\IO_T) (20170531/utaddress-247)
[    4.951387] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.951388] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.951651] EDAC ie31200: No ECC support
[    4.952979] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
[    4.953095] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    4.953115] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    4.954199] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.961236] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[    4.961248] ACPI: Sleep Button [SLPB]
[    4.961348] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[    4.961383] ACPI: Lid Switch [LID]
[    4.961431] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    4.961453] ACPI: Power Button [PWRF]
[    4.961962] pps_core: LinuxPPS API ver. 1 registered
[    4.961963] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    5.003707] ACPI: AC Adapter [AC] (on-line)
[    5.003965] input: HP Wireless hotkeys as /devices/virtual/input/input8
[    5.004042] PTP clock support registered
[    5.015451] Linux agpgart interface v0.103
[    5.015801] hp_accel: hardware type HPB64xx found
[    5.044231] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    5.044233] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    5.044492] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    5.054137] ACPI: Battery Slot [BAT0] (battery absent)
[    5.090005] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[    5.139012] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    5.143710] lis3lv02d: 8 bits 3DC sensor found
[    5.160235] Bluetooth: Core ver 2.22
[    5.160250] NET: Registered protocol family 31
[    5.160251] Bluetooth: HCI device and connection manager initialized
[    5.160253] Bluetooth: HCI socket layer initialized
[    5.160254] Bluetooth: L2CAP socket layer initialized
[    5.160258] Bluetooth: SCO socket layer initialized
[    5.162982] usbcore: registered new interface driver btusb
[    5.209682] media: Linux media interface: v0.10
[    5.213195] Linux video capture interface: v2.00
[    5.220855] uvcvideo: Found UVC 1.00 device HP HD Webcam (04ca:7034)
[    5.223369] uvcvideo 3-7:1.0: Entity type for entity Extension 5 was not initialized!
[    5.223371] uvcvideo 3-7:1.0: Entity type for entity Extension 2 was not initialized!
[    5.223373] uvcvideo 3-7:1.0: Entity type for entity Processing 3 was not initialized!
[    5.223375] uvcvideo 3-7:1.0: Entity type for entity Camera 1 was not initialized!
[    5.223453] input: HP HD Webcam: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input9
[    5.223482] usbcore: registered new interface driver uvcvideo
[    5.223482] USB Video Class driver (1.1.1)
[    5.223804] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 34:64:a9:d5:5a:54
[    5.223810] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    5.223860] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[    5.223890] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[    5.224095] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    5.225122] [drm] Memory usable by graphics device = 2048M
[    5.225125] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[    5.225126] fb: switching to inteldrmfb from EFI VGA
[    5.225151] Console: switching to colour dummy device 80x25
[    5.225215] [drm] Replacing VGA console driver
[    5.235395] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.235397] [drm] Driver supports precise vblank timestamp query.
[    5.236385] snd_hda_codec_idt hdaudioC1D0: autoconfig for 92HD91BXX: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[    5.236387] snd_hda_codec_idt hdaudioC1D0:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[    5.236389] snd_hda_codec_idt hdaudioC1D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    5.236390] snd_hda_codec_idt hdaudioC1D0:    mono: mono_out=0x0
[    5.236391] snd_hda_codec_idt hdaudioC1D0:    inputs:
[    5.236393] snd_hda_codec_idt hdaudioC1D0:      Mic=0xc
[    5.236394] snd_hda_codec_idt hdaudioC1D0:      Internal Mic=0x11
[    5.236396] snd_hda_codec_idt hdaudioC1D0:      Line=0xf
[    5.237166] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.240940] bcma-pci-bridge 0000:02:00.0: enabling device (0000 -> 0002)
[    5.241094] bcma: bus0: Found chip with id 43228, rev 0x00 and package 0x08
[    5.241120] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0)
[    5.241141] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0)
[    5.241183] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x12, class 0x0)
[    5.241206] bcma: bus0: Core 3 found: SDIO Device (manuf 0x4BF, id 0x829, rev 0x07, class 0x0)
[    5.251638] bcma: bus0: Bus registered
[    5.261573] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[    5.272274] Bluetooth: hci0: BCM: chip id 63
[    5.273287] Bluetooth: hci0: BCM: features 0x07
[    5.280917] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[    5.281471] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[    5.281524] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[    5.281546] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[    5.281568] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[    5.289277] Bluetooth: hci0: BCM20702A
[    5.290271] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[    5.294265] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21f1.hcd failed with error -2
[    5.294269] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21f1.hcd not found
[    5.335220] input: PC Speaker as /devices/platform/pcspkr/input/input18
[    5.362437] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    5.362439] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.362439] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.362440] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    5.362441] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    5.371441] AVX2 version of gcm_enc/dec engaged.
[    5.371443] AES CTR mode by8 optimization enabled
[    5.408078] intel_rapl: Found RAPL domain package
[    5.408080] intel_rapl: Found RAPL domain core
[    5.408081] intel_rapl: Found RAPL domain uncore
[    5.408082] intel_rapl: Found RAPL domain dram
[    5.419412] parport_pc 00:04: reported by Plug and Play ACPI
[    5.419472] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE,EPP]
[    5.430745] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    5.540219] iTCO_vendor_support: vendor-support=0
[    5.540907] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.540962] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[    5.541445] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.565263] ppdev: user-space parallel port driver
[    5.571030] input: HP WMI hotkeys as /devices/virtual/input/input19
[    5.577580] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    5.577784] thermal LNXTHERM:00: registered as thermal_zone1
[    5.577786] ACPI: Thermal Zone [CPUZ] (51 C)
[    5.636960] b43-phy0: Broadcom 43228 WLAN found (core revision 30)
[    5.637360] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 16
[    5.637368] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 9, Version 1
[    5.637910] Broadcom 43xx driver loaded [ Features: PNLS ]
[    5.648954] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    5.696663] b43 bcma0:1 wlp2s0b1: renamed from wlan0
[    5.775292] random: crng init done
[    5.789518] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    6.000480] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    6.002154] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[    6.112463] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826]
[    6.134004] thermal LNXTHERM:01: registered as thermal_zone2
[    6.134006] ACPI: Thermal Zone [GFXZ] (0 C)
[    6.146710] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..]
[    6.146720] psmouse serio3: synaptics: Your touchpad (PNP: SYN3002 SYN0100 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    6.166749] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[    6.205462] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26800/0x0, board id: 2758, fw id: 1530444
[    6.242568] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input17
[    6.246215] mousedev: PS/2 mouse device common for all mice
[    6.324091] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[    6.532309] thermal LNXTHERM:02: registered as thermal_zone3
[    6.532311] ACPI: Thermal Zone [EXTZ] (0 C)
[    6.533362] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[    6.547480] thermal LNXTHERM:03: registered as thermal_zone4
[    6.547484] ACPI: Thermal Zone [LOCZ] (39 C)
[    6.562682] thermal LNXTHERM:04: registered as thermal_zone5
[    6.562685] ACPI: Thermal Zone [BATZ] (20 C)
[    6.563216] thermal LNXTHERM:05: registered as thermal_zone6
[    6.563218] ACPI: Thermal Zone [PCHZ] (114 C)
[    6.563636] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input21
[    6.683943] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[    6.752137] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[    7.327971] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    7.328735] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input22
[    7.329091] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    7.370774] fbcon: inteldrmfb (fb0) is primary device
[    8.462228] Console: switching to colour frame buffer device 200x56
[    8.485336] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    8.518741] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
[    8.518803] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24
[    8.518860] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input25
[    8.518915] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input26
[    8.518966] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input27
[    9.456757] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[    9.606892] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[   11.949015] wlp2s0b1: authenticate with 00:14:d1:9c:2c:c8
[   12.063598] wlp2s0b1: send auth to 00:14:d1:9c:2c:c8 (try 1/3)
[   12.065672] wlp2s0b1: authenticated
[   12.069991] wlp2s0b1: associate with 00:14:d1:9c:2c:c8 (try 1/3)
[   12.077716] wlp2s0b1: RX AssocResp from 00:14:d1:9c:2c:c8 (capab=0x411 status=0 aid=5)
[   12.078129] wlp2s0b1: associated
[   12.078205] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0b1: link becomes ready

Thanks for your help.

Last edited by quiddi (2017-10-31 12:00:31)

Offline

#2 2017-10-31 14:12:12

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 19,791

Re: HP ProBook 640G1 busy at starting

It sounds like it is booting just fine.  The Graphical Interface level is many steps past having booted.
When this happens, can you change to a different console using Ctrl-Alt-F2  (or F3 through F6) ?
What type of graphics does this system have? Is it Hybrid?
Are you using a Display Manager? (Like SDDM?)
What are you using as a Desktop Environment / Window Manager?

Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

Offline

#3 2017-10-31 17:20:45

quiddi
Member
Registered: 2016-12-01
Posts: 12

Re: HP ProBook 640G1 busy at starting

When this happens, can you change to a different console using Ctrl-Alt-F2  (or F3 through F6) ?

Yes. I did the dmesg when it stucked and changed to the terminal with Ctrl-Alt-F2. As already said it stuckes at the first screen(Ctrl-Alt-F1) with

[OK] Reached target Graphical Interface.

What type of graphics does this system have? Is it Hybrid?
Are you using a Display Manager? (Like SDDM?)

No Hybrid, Intel Core i5-4200M with  Intel HD Graphics 4600
Desktop Manager: KDM
Window Manager: Awesome WM

Offline

#4 2017-10-31 17:40:25

Xabre
Member
From: Serbia
Registered: 2009-03-19
Posts: 750

Re: HP ProBook 640G1 busy at starting

KDM is not in Arch repoes for a long long time now,

Offline

#5 2017-11-01 11:17:42

quiddi
Member
Registered: 2016-12-01
Posts: 12

Re: HP ProBook 640G1 busy at starting

Xabre wrote:

KDM is not in Arch repoes for a long long time now,

Sorry, it's SDDM of course.

I also did some tests today:

- installed lightdm. It haves the same problem.
- tried to deinstall lib32-mesa, but I'm having unresolvable dependencies. Could it be a problem to have lib32-mesa and mesa installed together?

Last edited by quiddi (2017-11-01 12:19:42)

Offline

#6 2017-11-01 14:08:31

quiddi
Member
Registered: 2016-12-01
Posts: 12

Re: HP ProBook 640G1 busy at starting

Ok, so I downgraded to Kernel 4.9.59 and it's working. Is there a posibility to boot it with the current kernel 4.13? I tried a lot of bootflags to set in grub, but it didn't help.

Offline

Pages: 1

Board footer

Powered by FluxBB