You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2017-11-22 07:28:13
- Gingyr
- Member
- Registered: 2017-11-22
- Posts: 4
[Solved] Can't Change Governor
Hi all,
For some reason my governor is set to ondemand and I am attempting to change it to performance, but I am having a hard time achieving this, and I am hoping that someone could lead me in the right direction. I have been reading the CPU Frequency Scaling article on the wiki for hours and read through plenty of different solutions prior to coming here, but I'm still stumped.
A few of the things I've tried are:
cpupower frequency-inforeturns
analyzing CPU 0:
no or unknown cpufreq driver is active on this CPU
CPUs which run at the same hardware frequency: Not Available
CPUs which need to have their frequency coordinated by software: Not Available
maximum transition latency: Cannot determine or is not supported.
Not Available
available cpufreq governors: Not Available
Unable to determine current policy
current CPU frequency: Unable to call hardware
current CPU frequency: Unable to call to kernel
boost state support:
Supported: yes
Active: yescpupower frequency-set -g performancereturns
Setting cpu: 0
Error setting new values. Common errors:
- Do you have proper administration rights? (super-user?)
- Is the governor you requested available and modprobed?
- Trying to set an invalid policy?
- Trying to set a specific frequency, but userspace governor is not available,
for example because of hardware which cannot be set to a specific frequency
or because the userspace governor isn't loaded?I attempted to modprobe multiple modules, but all of the modules listed on the aforementioned article returned
modprobe: FATAL: Module intel_pstate not found in directory /lib/modules/4.13.12-1-ARCHor
modprobe: ERROR: could not insert 'x': No such devicewhere x = acpi_cpufreq, powernow-k8, pcc-cpufreq, p4-clockmod
and speedstep-lib returned no errors.
Edit: ondemand instead of powersave
Last edited by Gingyr (2017-11-23 03:26:58)
Offline
#2 2017-11-22 08:11:27
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 21,736
Re: [Solved] Can't Change Governor
What CPU are we talking? Why is no governor at all loaded? Are you blocking something in modprobe? Kernel parameters? Can you post a full untruncated
pacman -Q linux
uname -a
lscpu
dmesgLast edited by V1del (2017-11-22 08:12:01)
Offline
#3 2017-11-22 16:19:34
- Gingyr
- Member
- Registered: 2017-11-22
- Posts: 4
Re: [Solved] Can't Change Governor
V1del wrote:
Can you post a full untruncated
pacman -Q linux uname -a lscpu dmesg
Thanks for responding. I ran these through the command line and this is what was returned.
[abel@archlinux ~]$ pacman -Q linux
linux 4.13.12-1
[abel@archlinux ~]$ uname -a
Linux archlinux 4.13.12-1-ARCH #1 SMP PREEMPT Wed Nov 8 11:54:06 CET 2017 x86_64 GNU/Linux
[abel@archlinux ~]$ lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 2
Core(s) per socket: 2
Socket(s): 1
NUMA node(s): 1
Vendor ID: AuthenticAMD
CPU family: 21
Model: 19
Model name: AMD Athlon(tm) X4 760K Quad Core Processor
Stepping: 1
CPU MHz: 3562.754
BogoMIPS: 8186.11
Virtualization: AMD-V
L1d cache: 16K
L1i cache: 64K
L2 cache: 2048K
NUMA node0 CPU(s): 0-3
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core perfctr_nb cpb hw_pstate vmmcall bmi1 arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold
[abel@archlinux ~]$ dmesg
[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4b7 with crng_init=0
[ 0.000000] Linux version 4.13.12-1-ARCH (builduser@tobias) (gcc version 7.2.0 (GCC)) #1 SMP PREEMPT Wed Nov 8 11:54:06 CET 2017
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=65be32b2-8681-4317-b6b2-d0aefe767a2f rw quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bcca1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bcca2000-0x00000000bccd1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bccd2000-0x00000000bcf8dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bcf8e000-0x00000000bd048fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bd049000-0x00000000be1f3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000be1f4000-0x00000000be23bfff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000be23c000-0x00000000be23cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be23d000-0x00000000be442fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000be443000-0x00000000be881fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be882000-0x00000000beff2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000beff3000-0x00000000beffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ESRT=0xbe1f2c98 ACPI=0xbd012000 ACPI 2.0=0xbd012000 SMBIOS=0xf04d0 MPS=0xfd590
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: MSI MS-7900/A88X-G45 GAMING (MS-7900), BIOS V1.0 02/11/2014
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BF000000 mask FFFFFF000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000023f000000 aka 9200M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xbf000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd920-0x000fd92f] mapped at [ffff9241000fd920]
[ 0.000000] esrt: Reserving ESRT space from 0x00000000be1f2c98 to 0x00000000be1f2cd0.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff924100098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x142d64000, 0x142d64fff] PGTABLE
[ 0.000000] BRK [0x142d65000, 0x142d65fff] PGTABLE
[ 0.000000] BRK [0x142d66000, 0x142d66fff] PGTABLE
[ 0.000000] BRK [0x142d67000, 0x142d67fff] PGTABLE
[ 0.000000] BRK [0x142d68000, 0x142d68fff] PGTABLE
[ 0.000000] BRK [0x142d69000, 0x142d69fff] PGTABLE
[ 0.000000] BRK [0x142d6a000, 0x142d6afff] PGTABLE
[ 0.000000] BRK [0x142d6b000, 0x142d6bfff] PGTABLE
[ 0.000000] BRK [0x142d6c000, 0x142d6cfff] PGTABLE
[ 0.000000] BRK [0x142d6d000, 0x142d6dfff] PGTABLE
[ 0.000000] BRK [0x142d6e000, 0x142d6efff] PGTABLE
[ 0.000000] BRK [0x142d6f000, 0x142d6ffff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x372eb000-0x3796cfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000BD012000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BD012080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BD0186A8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170531/tbfadt-658)
[ 0.000000] ACPI: DSDT 0x00000000BD0121A0 006505 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BD03FD80 000040
[ 0.000000] ACPI: APIC 0x00000000BD0187B8 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000BD018830 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000BD018878 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000BD0188B8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: IVRS 0x00000000BD0188F0 000068 (v02 AMD BANTRY 00000001 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x00000000BD018958 0004B7 (v02 AMD BANTRY 00000001 MSFT 04000000)
[ 0.000000] ACPI: CRAT 0x00000000BD018E10 000528 (v01 AMD BANTRY 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BD019338 000852 (v01 AMD CPMDFDGP 00000001 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000BD019B90 001463 (v01 AMD CPMDFIGP 00000001 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000BD01AFF8 00122C (v01 AMD CPMCMN 00000001 INTL 20051117)
[ 0.000000] ACPI: BGRT 0x00000000BD01C228 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23effb000-0x23effffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000023effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bcca1fff]
[ 0.000000] node 0: [mem 0x00000000bccd2000-0x00000000bcf8dfff]
[ 0.000000] node 0: [mem 0x00000000be23c000-0x00000000be23cfff]
[ 0.000000] node 0: [mem 0x00000000be443000-0x00000000be881fff]
[ 0.000000] node 0: [mem 0x00000000beff3000-0x00000000beffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000023effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff]
[ 0.000000] On node 0 totalpages: 2081610
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 26 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12047 pages used for memmap
[ 0.000000] DMA32 zone: 770987 pages, LIFO batch:31
[ 0.000000] Normal zone: 20416 pages used for memmap
[ 0.000000] Normal zone: 1306624 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbcca2000-0xbccd1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbcf8e000-0xbd048fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd049000-0xbe1f3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe1f4000-0xbe23bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe23d000-0xbe442fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe882000-0xbeff2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xbf000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff92433ec00000 s106520 r8192 d32744 u524288
[ 0.000000] pcpu-alloc: s106520 r8192 d32744 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2049057
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=65be32b2-8681-4317-b6b2-d0aefe767a2f rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7883872K/8326440K available (6644K kernel code, 1134K rwdata, 2048K rodata, 1336K init, 908K bss, 442568K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 28354 entries in 111 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 8448, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 4091.577 MHz processor
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 8186.11 BogoMIPS (lpj=13638590)
[ 0.003333] pid_max: default: 32768 minimum: 301
[ 0.003333] ACPI: Core revision 20170531
[ 0.009545] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.009940] Security Framework initialized
[ 0.009941] Yama: becoming mindful.
[ 0.011948] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.012953] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012996] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.013028] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.013206] CPU: Physical Processor ID: 0
[ 0.013208] CPU: Processor Core ID: 0
[ 0.013209] mce: CPU supports 7 MCE banks
[ 0.013219] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.013220] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.013333] Freeing SMP alternatives memory: 24K
[ 0.019723] smpboot: Max logical packages: 1
[ 0.020841] [Firmware Bug]: AMD-Vi: IOAPIC[0] not in IVRS table
[ 0.020847] [Firmware Bug]: AMD-Vi: No southbridge IOAPIC found
[ 0.020849] AMD-Vi: Disabling interrupt remapping
[ 0.021225] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056666] smpboot: CPU0: AMD Athlon(tm) X4 760K Quad Core Processor (family: 0x15, model: 0x13, stepping: 0x1)
[ 0.066696] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.066711] ... version: 0
[ 0.066712] ... bit width: 48
[ 0.066712] ... generic registers: 6
[ 0.066713] ... value mask: 0000ffffffffffff
[ 0.066714] ... max period: 00007fffffffffff
[ 0.066714] ... fixed-purpose events: 0
[ 0.066714] ... event mask: 000000000000003f
[ 0.073352] Hierarchical SRCU implementation.
[ 0.086756] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.093352] smp: Bringing up secondary CPUs ...
[ 0.120048] x86: Booting SMP configuration:
[ 0.120050] .... node #0, CPUs: #1 #2 #3
[ 0.425401] smp: Brought up 1 node, 4 CPUs
[ 0.425401] smpboot: Total of 4 processors activated (32740.00 BogoMIPS)
[ 0.425401] devtmpfs: initialized
[ 0.425401] x86/mm: Memory block size: 128MB
[ 0.427116] PM: Registering ACPI NVS region [mem 0xbcf8e000-0xbd048fff] (765952 bytes)
[ 0.427116] PM: Registering ACPI NVS region [mem 0xbe23d000-0xbe442fff] (2121728 bytes)
[ 0.427116] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.427116] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.427116] pinctrl core: initialized pinctrl subsystem
[ 0.427116] RTC time: 16:08:59, date: 11/22/17
[ 0.427116] NET: Registered protocol family 16
[ 0.427176] cpuidle: using governor ladder
[ 0.427176] cpuidle: using governor menu
[ 0.427176] PCCT header not found.
[ 0.427176] ACPI: bus type PCI registered
[ 0.427176] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.427176] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.427176] PCI: not using MMCONFIG
[ 0.427176] PCI: Using configuration type 1 for base access
[ 0.427176] PCI: Using configuration type 1 for extended access
[ 0.427396] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.427396] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.427396] ACPI: Added _OSI(Module Device)
[ 0.427396] ACPI: Added _OSI(Processor Device)
[ 0.427396] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.427396] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.427396] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.430202] ACPI: Interpreter enabled
[ 0.430224] ACPI: (supports S0 S3 S4 S5)
[ 0.430225] ACPI: Using IOAPIC for interrupt routing
[ 0.430289] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.430319] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.430328] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.438055] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.438060] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.438180] acpi PNP0A03:00: _OSC: platform does not support [PCIeCapability]
[ 0.438236] acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.438238] acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.438239] acpi PNP0A03:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.438240] acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.438537] PCI host bridge to bus 0000:00
[ 0.438538] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.438539] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.438540] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.438541] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.438542] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.438543] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.438544] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[ 0.438546] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.438552] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.438645] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
[ 0.438749] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
[ 0.438786] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.438866] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[ 0.438901] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.438977] pci 0000:00:06.0: [1022:1416] type 01 class 0x060400
[ 0.439012] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.439106] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.439130] pci 0000:00:10.0: reg 0x10: [mem 0xfe306000-0xfe307fff 64bit]
[ 0.439216] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.439310] pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
[ 0.439334] pci 0000:00:10.1: reg 0x10: [mem 0xfe304000-0xfe305fff 64bit]
[ 0.439420] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.439512] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.439528] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
[ 0.439535] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
[ 0.439542] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
[ 0.439549] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
[ 0.439556] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
[ 0.439563] pci 0000:00:11.0: reg 0x24: [mem 0xfe30d000-0xfe30d7ff]
[ 0.439662] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.439676] pci 0000:00:12.0: reg 0x10: [mem 0xfe30c000-0xfe30cfff]
[ 0.439791] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.439807] pci 0000:00:12.2: reg 0x10: [mem 0xfe30b000-0xfe30b0ff]
[ 0.439867] pci 0000:00:12.2: supports D1 D2
[ 0.439868] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.439944] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.439958] pci 0000:00:13.0: reg 0x10: [mem 0xfe30a000-0xfe30afff]
[ 0.440081] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.440097] pci 0000:00:13.2: reg 0x10: [mem 0xfe309000-0xfe3090ff]
[ 0.440158] pci 0000:00:13.2: supports D1 D2
[ 0.440159] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.440236] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.440354] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.440372] pci 0000:00:14.2: reg 0x10: [mem 0xfe300000-0xfe303fff 64bit]
[ 0.440422] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.440494] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.440616] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.440716] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[ 0.440729] pci 0000:00:14.5: reg 0x10: [mem 0xfe308000-0xfe308fff]
[ 0.440844] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.440901] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.440956] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.441012] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.441069] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.441124] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.441278] pci 0000:01:00.0: [10de:1380] type 00 class 0x030000
[ 0.441298] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.441308] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.441318] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.441324] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.441331] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
[ 0.441435] pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300
[ 0.441449] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
[ 0.450057] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.450062] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.450064] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.450067] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.450130] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.450147] pci 0000:02:00.0: reg 0x10: [mem 0xfe200000-0xfe200fff 64bit]
[ 0.450213] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.460039] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.460052] pci 0000:00:04.0: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.460115] pci 0000:03:00.0: [1969:e091] type 00 class 0x020000
[ 0.460140] pci 0000:03:00.0: reg 0x10: [mem 0xfe100000-0xfe13ffff 64bit]
[ 0.460148] pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd07f]
[ 0.460241] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.470052] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.470057] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
[ 0.470059] pci 0000:00:06.0: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.470189] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.470196] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.470197] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.470199] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.470200] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.470201] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.470202] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.470203] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[ 0.470702] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15)
[ 0.470755] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 *11 14 15)
[ 0.470808] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 *10 11 14 15)
[ 0.470861] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *5 7 10 11 14 15)
[ 0.470905] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.470939] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.470972] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.471005] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.471226] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.471226] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.471226] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.471226] vgaarb: loaded
[ 0.471226] EDAC MC: Ver: 3.0.0
[ 0.471226] Registered efivars operations
[ 0.477921] PCI: Using ACPI for IRQ routing
[ 0.484561] PCI: pci_cache_line_size set to 64 bytes
[ 0.484609] e820: reserve RAM buffer [mem 0xbcca2000-0xbfffffff]
[ 0.484610] e820: reserve RAM buffer [mem 0xbcf8e000-0xbfffffff]
[ 0.484611] e820: reserve RAM buffer [mem 0xbe23d000-0xbfffffff]
[ 0.484612] e820: reserve RAM buffer [mem 0xbe882000-0xbfffffff]
[ 0.484612] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[ 0.484613] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
[ 0.484685] NetLabel: Initializing
[ 0.484685] NetLabel: domain hash size = 128
[ 0.484685] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.484697] NetLabel: unlabeled traffic allowed by default
[ 0.484744] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.484744] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.486765] clocksource: Switched to clocksource hpet
[ 0.496531] VFS: Disk quotas dquot_6.6.0
[ 0.496556] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.496653] pnp: PnP ACPI init
[ 0.496800] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.496803] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.496854] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.496906] system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
[ 0.496908] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.497076] system 00:03: [io 0x0295-0x0296] has been reserved
[ 0.497078] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.497273] pnp 00:04: [dma 0 disabled]
[ 0.497306] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.497337] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.497358] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.497463] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.497464] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.497704] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.497705] system 00:08: [io 0x040b] has been reserved
[ 0.497706] system 00:08: [io 0x04d6] has been reserved
[ 0.497709] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.497710] system 00:08: [io 0x0c14] has been reserved
[ 0.497711] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 0.497712] system 00:08: [io 0x0c52] has been reserved
[ 0.497713] system 00:08: [io 0x0c6c] has been reserved
[ 0.497714] system 00:08: [io 0x0c6f] has been reserved
[ 0.497715] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.497718] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.497719] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.497720] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.497721] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.497722] system 00:08: [io 0x0800-0x089f] has been reserved
[ 0.497724] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 0.497725] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.497726] system 00:08: [io 0x0910-0x091f] has been reserved
[ 0.497727] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.497728] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.497730] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.497731] system 00:08: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.497732] system 00:08: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.497733] system 00:08: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.497735] system 00:08: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.497736] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.497738] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.497938] pnp: PnP ACPI: found 9 devices
[ 0.504677] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.504698] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.504700] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.504702] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.504704] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.504706] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.504708] pci 0000:00:04.0: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.504712] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.504713] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
[ 0.504715] pci 0000:00:06.0: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.504718] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.504728] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.504729] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.504730] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.504731] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.504732] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.504733] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.504734] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.504735] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.504736] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
[ 0.504737] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.504738] pci_bus 0000:02: resource 1 [mem 0xfe200000-0xfe2fffff]
[ 0.504739] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.504740] pci_bus 0000:03: resource 1 [mem 0xfe100000-0xfe1fffff]
[ 0.504741] pci_bus 0000:04: resource 4 [io 0x0000-0x03af window]
[ 0.504742] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.504743] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window]
[ 0.504744] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window]
[ 0.504745] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.504745] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.504746] pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.504797] NET: Registered protocol family 2
[ 0.504956] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.505110] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.505324] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.505366] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.505398] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.505465] NET: Registered protocol family 1
[ 0.506246] pci 0000:00:12.2: PME# does not work under D3, disabling it
[ 0.506567] pci 0000:00:13.2: PME# does not work under D3, disabling it
[ 0.506794] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.506908] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.506911] PCI: CLS 64 bytes, default 64
[ 0.506949] Unpacking initramfs...
[ 0.587432] Freeing initrd memory: 6664K
[ 0.620916] iommu: Adding device 0000:00:02.0 to group 0
[ 0.620965] iommu: Adding device 0000:00:04.0 to group 1
[ 0.621018] iommu: Adding device 0000:00:06.0 to group 2
[ 0.621124] iommu: Adding device 0000:00:10.0 to group 3
[ 0.621152] iommu: Adding device 0000:00:10.1 to group 3
[ 0.621202] iommu: Adding device 0000:00:11.0 to group 4
[ 0.621261] iommu: Adding device 0000:00:12.0 to group 5
[ 0.621272] iommu: Adding device 0000:00:12.2 to group 5
[ 0.621331] iommu: Adding device 0000:00:13.0 to group 6
[ 0.621343] iommu: Adding device 0000:00:13.2 to group 6
[ 0.621405] iommu: Adding device 0000:00:14.0 to group 7
[ 0.621417] iommu: Adding device 0000:00:14.2 to group 7
[ 0.621430] iommu: Adding device 0000:00:14.3 to group 7
[ 0.621480] iommu: Adding device 0000:00:14.4 to group 8
[ 0.621532] iommu: Adding device 0000:00:14.5 to group 9
[ 0.621605] iommu: Adding device 0000:00:18.0 to group 10
[ 0.621617] iommu: Adding device 0000:00:18.1 to group 10
[ 0.621629] iommu: Adding device 0000:00:18.2 to group 10
[ 0.621643] iommu: Adding device 0000:00:18.3 to group 10
[ 0.621655] iommu: Adding device 0000:00:18.4 to group 10
[ 0.621667] iommu: Adding device 0000:00:18.5 to group 10
[ 0.621678] iommu: Adding device 0000:01:00.0 to group 0
[ 0.621684] iommu: Adding device 0000:01:00.1 to group 0
[ 0.621691] iommu: Adding device 0000:02:00.0 to group 1
[ 0.621701] iommu: Adding device 0000:03:00.0 to group 2
[ 0.622126] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.622127] AMD-Vi: Extended features (0x800000853):
[ 0.622128] PreF PPR GT IA
[ 0.622311] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.623778] amd_uncore: AMD NB counters detected
[ 0.623985] LVT offset 0 assigned for vector 0x400
[ 0.624034] perf: AMD IBS detected (0x000000ff)
[ 0.624080] Scanning for low memory corruption every 60 seconds
[ 0.624549] Initialise system trusted keyrings
[ 0.624558] Key type blacklist registered
[ 0.624681] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.625664] zbud: loaded
[ 0.627292] Key type asymmetric registered
[ 0.627338] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.627384] io scheduler noop registered
[ 0.627385] io scheduler deadline registered
[ 0.627407] io scheduler cfq registered (default)
[ 0.627408] io scheduler mq-deadline registered
[ 0.627408] io scheduler kyber registered
[ 0.627428] io scheduler bfq registered
[ 0.627818] efifb: probing for efifb
[ 0.627834] efifb: framebuffer at 0xd1000000, using 3072k, total 3072k
[ 0.627835] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.627835] efifb: scrolling: redraw
[ 0.627837] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.629255] Console: switching to colour frame buffer device 128x48
[ 0.630580] fb0: EFI VGA frame buffer device
[ 0.634541] GHES: HEST is not enabled!
[ 0.634646] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.655184] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.655962] rtc_cmos 00:06: RTC can wake from S4
[ 0.656068] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.656090] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.656134] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.656170] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 0.656355] NET: Registered protocol family 10
[ 0.659266] Segment Routing with IPv6
[ 0.659287] NET: Registered protocol family 17
[ 0.659475] RAS: Correctable Errors collector initialized.
[ 0.659519] microcode: CPU0: patch_level=0x06001119
[ 0.659526] microcode: CPU1: patch_level=0x06001119
[ 0.659530] microcode: CPU2: patch_level=0x06001119
[ 0.659536] microcode: CPU3: patch_level=0x06001119
[ 0.659572] microcode: Microcode Update Driver: v2.2.
[ 0.659581] sched_clock: Marking stable (659567596, 0)->(759865871, -100298275)
[ 0.659774] registered taskstats version 1
[ 0.659780] Loading compiled-in X.509 certificates
[ 0.659794] zswap: loaded using pool lzo/zbud
[ 0.662416] Key type big_key registered
[ 0.662651] Magic number: 9:446:136
[ 0.662660] misc autofs: hash matches
[ 0.662796] rtc_cmos 00:06: setting system clock to 2017-11-22 16:08:59 UTC (1511366939)
[ 0.663678] PM: Hibernation image not present or could not be loaded.
[ 0.664985] Freeing unused kernel memory: 1336K
[ 0.664986] Write protecting the kernel read-only data: 10240k
[ 0.665558] Freeing unused kernel memory: 1536K
[ 0.729358] i8042: PNP: No PS/2 controller found.
[ 0.734065] ACPI: bus type USB registered
[ 0.734086] usbcore: registered new interface driver usbfs
[ 0.734093] usbcore: registered new interface driver hub
[ 0.734121] usbcore: registered new device driver usb
[ 0.734697] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.734904] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.734905] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 0.735480] ehci-pci: EHCI PCI platform driver
[ 0.735677] QUIRK: Enable AMD PLL fix
[ 0.735700] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.735708] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.735713] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.735721] ehci-pci 0000:00:12.2: debug port 1
[ 0.735759] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe30b000
[ 0.736036] SCSI subsystem initialized
[ 0.737476] libata version 3.00 loaded.
[ 0.746686] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.746839] hub 1-0:1.0: USB hub found
[ 0.746844] hub 1-0:1.0: 5 ports detected
[ 0.747168] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.747173] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.747176] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.747186] ehci-pci 0000:00:13.2: debug port 1
[ 0.747218] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe309000
[ 0.760126] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.760319] hub 2-0:1.0: USB hub found
[ 0.760324] hub 2-0:1.0: 5 ports detected
[ 0.760595] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.760600] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 0.760795] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
[ 0.761111] hub 3-0:1.0: USB hub found
[ 0.761117] hub 3-0:1.0: 2 ports detected
[ 0.761193] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.761196] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[ 0.763888] i8042: PNP: No PS/2 controller found.
[ 0.764071] ohci-pci: OHCI PCI platform driver
[ 0.764211] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.764347] hub 4-0:1.0: USB hub found
[ 0.764355] hub 4-0:1.0: 2 ports detected
[ 0.764573] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 0.764579] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 5
[ 0.764770] xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
[ 0.765015] hub 5-0:1.0: USB hub found
[ 0.765022] hub 5-0:1.0: 2 ports detected
[ 0.765101] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 0.765103] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
[ 0.768178] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.768345] hub 6-0:1.0: USB hub found
[ 0.768352] hub 6-0:1.0: 2 ports detected
[ 0.768455] ahci 0000:00:11.0: version 3.0
[ 0.768465] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.768469] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 7
[ 0.768592] xhci_hcd 0000:02:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090
[ 0.768756] hub 7-0:1.0: USB hub found
[ 0.768759] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 0.768761] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio
[ 0.768762] hub 7-0:1.0: 1 port detected
[ 0.768822] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.768824] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 0.768847] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.768935] hub 8-0:1.0: USB hub found
[ 0.768945] hub 8-0:1.0: 4 ports detected
[ 0.770401] scsi host0: ahci
[ 0.770608] scsi host1: ahci
[ 0.770713] scsi host2: ahci
[ 0.770806] scsi host3: ahci
[ 0.770883] scsi host4: ahci
[ 0.770974] scsi host5: ahci
[ 0.771076] scsi host6: ahci
[ 0.771169] scsi host7: ahci
[ 0.771208] ata1: SATA max UDMA/133 abar m2048@0xfe30d000 port 0xfe30d100 irq 36
[ 0.771210] ata2: SATA max UDMA/133 abar m2048@0xfe30d000 port 0xfe30d180 irq 36
[ 0.771212] ata3: SATA max UDMA/133 abar m2048@0xfe30d000 port 0xfe30d200 irq 36
[ 0.771214] ata4: SATA max UDMA/133 abar m2048@0xfe30d000 port 0xfe30d280 irq 36
[ 0.771216] ata5: SATA max UDMA/133 abar m2048@0xfe30d000 port 0xfe30d300 irq 36
[ 0.771218] ata6: SATA max UDMA/133 abar m2048@0xfe30d000 port 0xfe30d380 irq 36
[ 0.771220] ata7: SATA max UDMA/133 abar m2048@0xfe30d000 port 0xfe30d400 irq 36
[ 0.771222] ata8: SATA max UDMA/133 abar m2048@0xfe30d000 port 0xfe30d480 irq 36
[ 0.771373] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 0.771379] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 9
[ 0.771415] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe30c000
[ 0.831045] hub 9-0:1.0: USB hub found
[ 0.831055] hub 9-0:1.0: 5 ports detected
[ 0.831346] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 0.831352] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 10
[ 0.831376] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe30a000
[ 0.891112] hub 10-0:1.0: USB hub found
[ 0.891137] hub 10-0:1.0: 5 ports detected
[ 0.891430] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 0.891435] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 11
[ 0.891461] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe308000
[ 0.951044] hub 11-0:1.0: USB hub found
[ 0.951054] hub 11-0:1.0: 2 ports detected
[ 1.080214] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.080238] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.080265] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.080289] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.080326] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.080366] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.083421] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[ 1.086753] usb 7-1: new high-speed USB device number 2 using xhci_hcd
[ 1.218050] hub 5-1:1.0: USB hub found
[ 1.218661] hub 7-1:1.0: USB hub found
[ 1.218666] hub 5-1:1.0: 4 ports detected
[ 1.219007] hub 7-1:1.0: 4 ports detected
[ 1.236696] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.240082] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.240853] ata1.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[ 1.240856] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.241674] ata1.00: configured for UDMA/133
[ 1.241857] scsi 0:0:0:0: Direct-Access ATA WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[ 1.242985] ata2.00: ATA-8: ST500LM012 HN-M500MBB, 2AR20003, max UDMA/133
[ 1.242987] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.249331] ata2.00: configured for UDMA/133
[ 1.280421] scsi 1:0:0:0: Direct-Access ATA ST500LM012 HN-M5 0003 PQ: 0 ANSI: 5
[ 1.322388] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.322390] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.322399] sd 0:0:0:0: [sda] Write Protect is off
[ 1.322401] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.322414] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.322432] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.322441] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.322442] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.322452] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.333308] usb 5-2: new full-speed USB device number 3 using xhci_hcd
[ 1.350057] usb 10-4: new full-speed USB device number 2 using ohci-pci
[ 1.376680] sda: sda1 sda2 sda3
[ 1.377215] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.508329] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.522436] usbcore: registered new interface driver usbhid
[ 1.522438] usbhid: USB HID core driver
[ 1.523115] input: Blue Microphones Yeti Stereo Microphone as /devices/pci0000:00/0000:00:10.1/usb5/5-2/5-2:1.3/0003:B58E:9E84.0001/input/input0
[ 1.539997] usb 5-1.1: new full-speed USB device number 4 using xhci_hcd
[ 1.576820] hid-generic 0003:B58E:9E84.0001: input,hiddev0,hidraw0: USB HID v1.00 Device [Blue Microphones Yeti Stereo Microphone] on usb-0000:00:10.1-2/input3
[ 1.649980] tsc: Refined TSC clocksource calibration: 4091.081 MHz
[ 1.649988] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3af875aa335, max_idle_ns: 440795365331 ns
[ 1.688363] sdb: sdb1
[ 1.688734] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.702684] input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1.1/5-1.1:1.0/0003:046D:C24A.0002/input/input1
[ 1.702791] hid-generic 0003:046D:C24A.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech Gaming Mouse G600] on usb-0000:00:10.1-1.1/input0
[ 1.710969] input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1.1/5-1.1:1.1/0003:046D:C24A.0003/input/input2
[ 1.766818] hid-generic 0003:046D:C24A.0003: input,hiddev1,hidraw2: USB HID v1.11 Keyboard [Logitech Gaming Mouse G600] on usb-0000:00:10.1-1.1/input1
[ 1.839970] usb 5-1.2: new full-speed USB device number 5 using xhci_hcd
[ 1.945404] input: HUION 420 Pen as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1.2/5-1.2:1.0/0003:256C:006E.0004/input/input3
[ 1.945427] input: HUION 420 Pad as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1.2/5-1.2:1.0/0003:256C:006E.0004/input/input4
[ 1.945482] uclogic 0003:256C:006E.0004: input,hidraw3: USB HID v1.11 Keypad [HUION 420] on usb-0000:00:10.1-1.2/input0
[ 1.945763] input: HUION 420 Mouse as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1.2/5-1.2:1.1/0003:256C:006E.0005/input/input5
[ 1.945822] uclogic 0003:256C:006E.0005: input,hiddev2,hidraw4: USB HID v1.11 Mouse [HUION 420] on usb-0000:00:10.1-1.2/input1
[ 1.946020] input: HUION 420 Keyboard as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1.2/5-1.2:1.2/0003:256C:006E.0006/input/input7
[ 2.000060] input: HUION 420 Consumer Control as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1.2/5-1.2:1.2/0003:256C:006E.0006/input/input8
[ 2.000088] input: HUION 420 System Control as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1.2/5-1.2:1.2/0003:256C:006E.0006/input/input9
[ 2.000147] uclogic 0003:256C:006E.0006: input,hidraw5: USB HID v1.11 Keyboard [HUION 420] on usb-0000:00:10.1-1.2/input2
[ 2.019981] usb 5-1.3: new high-speed USB device number 6 using xhci_hcd
[ 2.199968] usb 5-1.4: new full-speed USB device number 7 using xhci_hcd
[ 2.376284] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.663400] clocksource: Switched to clocksource tsc
[ 2.986659] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.998293] systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 3.103407] systemd[1]: Detected architecture x86-64.
[ 3.103451] systemd[1]: No hostname configured.
[ 3.103455] systemd[1]: Set hostname to <archlinux>.
[ 3.569557] random: crng init done
[ 3.742188] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.742589] systemd[1]: Created slice User and Session Slice.
[ 3.742599] systemd[1]: Reached target Remote File Systems.
[ 3.742638] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.742664] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.742670] systemd[1]: Reached target Local Encrypted Volumes.
[ 3.811847] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[ 4.133602] systemd-journald[225]: Received request to flush runtime journal from PID 1
[ 4.368869] systemd-journald[225]: File /var/log/journal/728ca789cea947b4b235f8b7b9b1701d/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 4.893807] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 4.893810] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
[ 4.893930] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 4.894248] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input10
[ 4.894268] ACPI: Power Button [PWRB]
[ 4.894316] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
[ 4.894325] ACPI: Power Button [PWRF]
[ 4.940270] i8042: PNP: No PS/2 controller found.
[ 4.973586] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.993706] i8042: PNP: No PS/2 controller found.
[ 5.001016] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 5.001069] sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x780b, Revision ID: 0x16
[ 5.001072] sp5100_tco: I/O address 0x0cd6 already in use
[ 5.033548] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 5.033820] i8042: PNP: No PS/2 controller found.
[ 5.033874] acpi device:22: registered as cooling_device4
[ 5.033917] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:21/LNXVIDEO:01/input/input12
[ 5.107191] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 5.127204] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 5.127211] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 5.289932] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
[ 5.290451] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 5.290453] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.290454] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 5.290454] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 5.290455] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 5.290456] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 5.290457] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 5.290458] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 5.290459] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 5.308359] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 5.308918] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[ 5.308939] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[ 5.308960] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
[ 5.308980] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
[ 5.309000] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
[ 5.309020] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
[ 5.309040] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
[ 5.309059] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input22
[ 5.386256] AVX version of gcm_enc/dec engaged.
[ 5.386257] AES CTR mode by8 optimization enabled
[ 5.522862] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [44:8a:5b:89:83:90]
[ 5.529371] mousedev: PS/2 mouse device common for all mice
[ 5.537250] usbcore: registered new interface driver snd-usb-audio
[ 5.620565] input: PowerA Xbox One Mini Wired Controller as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1.4/5-1.4:1.0/input/input23
[ 5.620651] usbcore: registered new interface driver xpad
[ 5.650541] kvm: Nested Virtualization enabled
[ 5.650543] kvm: Nested Paging enabled
[ 5.700501] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input24
[ 5.700547] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input25
[ 5.859239] MCE: In-kernel MCE decoding enabled.
[ 5.860102] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.860103] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 5.903699] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.903704] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 5.957009] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.957012] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 5.984738] Adding 16777212k swap on /dev/sda2. Priority:-1 extents:1 across:16777212k FS
[ 6.006987] EDAC amd64: Node 0: DRAM ECC disabled.
[ 6.006989] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 6.236826] alx 0000:03:00.0 enp3s0: renamed from eth0
[ 6.589975] usb 10-4: device descriptor read/64, error -110
[ 6.824793] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.512786] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 8.513433] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 8.514214] alx 0000:03:00.0 enp3s0: NIC Up: 100 Mbps Full
[ 8.514432] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 16.649975] usb 7-1.4: new full-speed USB device number 3 using xhci_hcd
[ 16.794785] logitech-djreceiver 0003:046D:C52B.0009: hiddev3,hidraw6: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:02:00.0-1.4/input2
[ 16.922721] input: Logitech MX Master as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb7/7-1/7-1.4/7-1.4:1.2/0003:046D:C52B.0009/0003:046D:4060.000A/input/input26
[ 16.922849] logitech-hidpp-device 0003:046D:4060.000A: input,hidraw7: USB HID v1.11 Keyboard [Logitech MX Master] on usb-0000:02:00.0-1.4:1
[ 16.930723] input: Logitech MX Master as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb7/7-1/7-1.4/7-1.4:1.2/0003:046D:C52B.0009/0003:046D:4060.000B/input/input27
[ 16.930829] logitech-hidpp-device 0003:046D:4060.000B: input,hidraw8: USB HID v1.11 Keyboard [Logitech MX Master] on usb-0000:02:00.0-1.4:2
[ 18.576642] usb 7-1.3: new full-speed USB device number 4 using xhci_hcd
[ 18.681353] input: Corsair Corsair STRAFE Gaming Keyboard as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb7/7-1/7-1.3/7-1.3:1.0/0003:1B1C:1B15.000C/input/input28
[ 18.681657] hid-generic 0003:1B1C:1B15.000C: input,hidraw9: USB HID v1.11 Keyboard [Corsair Corsair STRAFE Gaming Keyboard] on usb-0000:02:00.0-1.3/input0
[ 18.686923] input: Corsair Corsair STRAFE Gaming Keyboard as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb7/7-1/7-1.3/7-1.3:1.1/0003:1B1C:1B15.000D/input/input29
[ 18.687094] hid-generic 0003:1B1C:1B15.000D: input,hiddev4,hidraw10: USB HID v1.11 Keyboard [Corsair Corsair STRAFE Gaming Keyboard] on usb-0000:02:00.0-1.3/input1
[ 18.687142] usbhid 7-1.3:1.2: couldn't find an input interrupt endpoint
[ 32.353791] usb 5-1.4: USB disconnect, device number 7
[ 32.398623] nvidia: loading out-of-tree module taints kernel.
[ 32.398630] nvidia: module license 'NVIDIA' taints kernel.
[ 32.398630] Disabling lock debugging due to kernel taint
[ 32.412998] nvidia-nvlink: Nvlink Core is being initialized, major device number 246
[ 32.413453] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 32.413612] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 387.22 Wed Oct 25 23:13:21 PDT 2017 (using threaded interrupts)
[ 32.816626] usb 5-1.4: new full-speed USB device number 8 using xhci_hcd
[ 32.915611] input: PowerA Xbox One Mini Wired Controller as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1.4/5-1.4:1.0/input/input30
[ 33.123452] NVRM: Your system is not currently configured to drive a VGA console
[ 33.142492] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 387.22 Wed Oct 25 22:46:40 PDT 2017
[ 33.143167] nvidia-modeset: Allocated GPU:0 (GPU-889f0cd2-242a-6b6c-a7b1-e70da0fb585c) @ PCI:0000:01:00.0
[ 58.977821] usb 5-1.4: USB disconnect, device number 8
[ 59.439968] usb 5-1.4: new full-speed USB device number 9 using xhci_hcd
[ 59.538757] input: PowerA Xbox One Mini Wired Controller as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1.4/5-1.4:1.0/input/input31
[ 61.431346] logitech-hidpp-device 0003:046D:4060.000A: HID++ 4.5 device connected.
[ 85.601796] usb 5-1.4: USB disconnect, device number 9
[ 86.063213] usb 5-1.4: new full-speed USB device number 10 using xhci_hcd
[ 86.162142] input: PowerA Xbox One Mini Wired Controller as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1.4/5-1.4:1.0/input/input32
[ 112.226146] usb 5-1.4: USB disconnect, device number 10
[ 112.686628] usb 5-1.4: new full-speed USB device number 11 using xhci_hcd
[ 112.786276] input: PowerA Xbox One Mini Wired Controller as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1.4/5-1.4:1.0/input/input33
[ 138.850085] usb 5-1.4: USB disconnect, device number 11
[ 139.309950] usb 5-1.4: new full-speed USB device number 12 using xhci_hcd
[ 139.409565] input: PowerA Xbox One Mini Wired Controller as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1.4/5-1.4:1.0/input/input34
[ 165.474104] usb 5-1.4: USB disconnect, device number 12
[ 165.936608] usb 5-1.4: new full-speed USB device number 13 using xhci_hcd
[ 166.036084] input: PowerA Xbox One Mini Wired Controller as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1.4/5-1.4:1.0/input/input35
[ 192.098219] usb 5-1.4: USB disconnect, device number 13
[ 192.559921] usb 5-1.4: new full-speed USB device number 14 using xhci_hcd
[ 192.658991] input: PowerA Xbox One Mini Wired Controller as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1.4/5-1.4:1.0/input/input36Offline
#4 2017-11-23 00:34:03
- Gingyr
- Member
- Registered: 2017-11-22
- Posts: 4
Re: [Solved] Can't Change Governor
Just a correction, it seems as though it would be the ondemand governor, rather than the powersave governor, that my system has been set to by default, as I am on an AMD CPU.
Offline
#5 2017-11-23 00:56:24
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,372
Re: [Solved] Can't Change Governor
What is the output of
$ cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
$ cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_driverThe following did not work because intel_pstate is built into the kernel
modprobe: FATAL: Module intel_pstate not found in directory /lib/modules/4.13.12-1-ARCHnote the y instead of m
$ zgrep PSTATE /proc/config.gz
CONFIG_X86_INTEL_PSTATE=yPlease also edit your last post if yours is the last post in a thread instead of creating a new one and bumping the topic.
Edit:
changed a 0 to a * for consistency.
Last edited by loqs (2017-11-23 00:57:08)
Offline
#6 2017-11-23 00:59:39
- 2ManyDogs
- Forum Fellow
- Registered: 2012-01-15
- Posts: 4,645
Re: [Solved] Can't Change Governor
Can I ask why you want to set this governor to performance? ondemand should scale to the highest frequency when necessary, and scale back when it's not.
Offline
#7 2017-11-23 01:18:31
- Gingyr
- Member
- Registered: 2017-11-22
- Posts: 4
Re: [Solved] Can't Change Governor
Interestingly, if I disable my OC Genie option my BIOS (MSI Board), and allow the clock speed to lower to it's factory clock speed, it results in a consistent clock speed that I was not seeing with OC Genie on. Turning OC Genie back on resulted in the CPU clock speed fluctuating like it was before. I am not sure that this is a problem regarding Arch or my governor anymore.
loqs wrote:
What is the output of
$ cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor $ cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_driver
[abel@archlinux ~]$ cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
cat: '/sys/devices/system/cpu/cpu*/cpufreq/scaling_governor': No such file or directory
[abel@archlinux ~]$ cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_driver
cat: '/sys/devices/system/cpu/cpu*/cpufreq/scaling_driver': No such file or directory2ManyDogs wrote:
Can I ask why you want to set this governor to performance? ondemand should scale to the highest frequency when necessary, and scale back when it's not.
I suspected that the governor was the culprit for significantly degrading my performance in the games I was trying to play that worked perfectly fine on my previous installation, however it seems not to be after having seen no performance difference in turning OC Genie off, as I had expected to see a performance increase as a result of a consistent clock speed.
I am still curious as to why the clock speed isn't consistent while OC Genie is enabled, as this was the case on my previous installation on this exact machine.
loqs wrote:
Please also edit your last post if yours is the last post in a thread instead of creating a new one and bumping the topic.
Will do, my bad.
I will mark this topic as solved as it seems that the issue at hand isn't actually what was causing the problem that provoked me to look into it.
Edit: Solved
Last edited by Gingyr (2017-11-23 03:26:44)
Offline
Pages: 1