You are not logged in.
Hey guys!
Cannot mount sd card on Arch (thunar xfce). Tried on LM (thunar xfce) and it mounts fine.
Here is the output from LM
sudo fdisk -l
[sudo] password for vb:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x0005a151
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 33320959 16659456 83 Linux
/dev/sda2 33320960 399439871 183059456 7 HPFS/NTFS/exFAT
/dev/sda3 399439872 446341119 23450624 7 HPFS/NTFS/exFAT
/dev/sda4 446341120 976773119 265216000 83 Linux
Disk /dev/mmcblk0: 15.5 GB, 15489564672 bytes
255 heads, 63 sectors/track, 1883 cylinders, total 30253056 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/mmcblk0p1 8192 30253055 15122432 c W95 FAT32 (LBA)Here is the output from Arch
sudo fdisk -l
[sudo] password for vb:
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x0005a151
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 33320959 33318912 15.9G 83 Linux
/dev/sda2 33320960 399439871 366118912 174.6G 7 HPFS/NTFS/exFAT
/dev/sda3 399439872 446341119 46901248 22.4G 7 HPFS/NTFS/exFAT
/dev/sda4 446341120 976773119 530432000 253G 83 LinuxAnd more from Arch
lsusb
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 05c8:0357 Cheng Uei Precision Industry Co., Ltd (Foxlink)
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hublsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 ext4 6b42d29b-ca14-47b4-8bce-9853114a8640
├─sda2 ntfs Data 2F6A372C3CA70A33 /run/media/Data
├─sda3 ntfs BC66AF6B66AF255C
└─sda4 ext4 676e4a6f-fe35-4b27-96ef-bcb7f166229f /
sr0
mmcblk0
└─mmcblk0p1 dmesg | grep mmc
[ 3.817907] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[12753.836428] mmc0: cannot verify signal voltage switch
[12754.018558] mmc0: new ultra high speed SDR50 SDHC card at address 1234
[12754.046871] mmcblk0: mmc0:1234 SA16G 14.4 GiB
[12754.047072] Modules linked in: mmc_block(+) rtsx_pci_sdmmc rtsx_pci_ms memstick mmc_core rtsx_pci fuse ctr ccm amdgpu mousedev arc4 iTCO_wdt iTCO_vendor_support rt2800pci rt2800mmio joydev gpio_ich rt2800lib hp_wmi rt2x00pci sparse_keymap rt2x00mmio rt2x00lib ppdev mac80211 intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec_hdmi crct10dif_pclmul crc32_pclmul ghash_clmulni_intel cryptd cfg80211 intel_cstate intel_rapl_perf eeprom_93cx6 rfkill snd_hda_codec_idt snd_hda_codec_generic snd_hda_intel snd_hda_codec psmouse input_leds lpc_ich snd_hda_core snd_hwdep snd_pcm snd_timer snd amdkfd amd_iommu_v2 radeon soundcore ttm wmi thermal parport_pc parport battery hp_accel evdev lis3lv02d input_polldev led_class mac_hid hp_wireless tpm_tis ac tpm_tis_core shpchp mei_me tpm mei tcp_westwood
[12754.047296] mmc_add_disk+0x2f/0x120 [mmc_block]
[12754.047301] mmc_blk_probe+0x352/0x450 [mmc_block]
[12754.047308] mmc_bus_probe+0x1a/0x20 [mmc_core]
[12754.047337] mmc_register_driver+0x16/0x20 [mmc_core]
[12754.047342] mmc_blk_init+0x5c/0x1000 [mmc_block]
[12754.047444] Modules linked in: mmc_block(+) rtsx_pci_sdmmc rtsx_pci_ms memstick mmc_core rtsx_pci fuse ctr ccm amdgpu mousedev arc4 iTCO_wdt iTCO_vendor_support rt2800pci rt2800mmio joydev gpio_ich rt2800lib hp_wmi rt2x00pci sparse_keymap rt2x00mmio rt2x00lib ppdev mac80211 intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec_hdmi crct10dif_pclmul crc32_pclmul ghash_clmulni_intel cryptd cfg80211 intel_cstate intel_rapl_perf eeprom_93cx6 rfkill snd_hda_codec_idt snd_hda_codec_generic snd_hda_intel snd_hda_codec psmouse input_leds lpc_ich snd_hda_core snd_hwdep snd_pcm snd_timer snd amdkfd amd_iommu_v2 radeon soundcore ttm wmi thermal parport_pc parport battery hp_accel evdev lis3lv02d input_polldev led_class mac_hid hp_wireless tpm_tis ac tpm_tis_core shpchp mei_me tpm mei tcp_westwood
[12754.047631] mmc_add_disk+0x2f/0x120 [mmc_block]
[12754.047635] mmc_blk_probe+0x352/0x450 [mmc_block]
[12754.047641] mmc_bus_probe+0x1a/0x20 [mmc_core]
[12754.047667] mmc_register_driver+0x16/0x20 [mmc_core]
[12754.047671] mmc_blk_init+0x5c/0x1000 [mmc_block]
[12754.050664] mmcblk0: p1
[12754.050665] Modules linked in: mmc_block(+) rtsx_pci_sdmmc rtsx_pci_ms memstick mmc_core rtsx_pci fuse ctr ccm amdgpu mousedev arc4 iTCO_wdt iTCO_vendor_support rt2800pci rt2800mmio joydev gpio_ich rt2800lib hp_wmi rt2x00pci sparse_keymap rt2x00mmio rt2x00lib ppdev mac80211 intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec_hdmi crct10dif_pclmul crc32_pclmul ghash_clmulni_intel cryptd cfg80211 intel_cstate intel_rapl_perf eeprom_93cx6 rfkill snd_hda_codec_idt snd_hda_codec_generic snd_hda_intel snd_hda_codec psmouse input_leds lpc_ich snd_hda_core snd_hwdep snd_pcm snd_timer snd amdkfd amd_iommu_v2 radeon soundcore ttm wmi thermal parport_pc parport battery hp_accel evdev lis3lv02d input_polldev led_class mac_hid hp_wireless tpm_tis ac tpm_tis_core shpchp mei_me tpm mei tcp_westwood
[12754.050758] CPU: 0 PID: 3186 Comm: mmcqd/0 Tainted: G W 4.12.14-1-ck-ivybridge #1
[12754.050801] mmc_blk_issue_rw_rq+0x286/0x3f0 [mmc_block]
[12754.050806] mmc_blk_issue_rq+0x79/0x530 [mmc_block]
[12754.050810] mmc_queue_thread+0xc5/0x160 [mmc_block]
[12754.050818] ? mmc_blk_issue_rq+0x530/0x530 [mmc_block]
[12754.102971] Modules linked in: mmc_block rtsx_pci_sdmmc rtsx_pci_ms memstick mmc_core rtsx_pci fuse ctr ccm amdgpu mousedev arc4 iTCO_wdt iTCO_vendor_support rt2800pci rt2800mmio joydev gpio_ich rt2800lib hp_wmi rt2x00pci sparse_keymap rt2x00mmio rt2x00lib ppdev mac80211 intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec_hdmi crct10dif_pclmul crc32_pclmul ghash_clmulni_intel cryptd cfg80211 intel_cstate intel_rapl_perf eeprom_93cx6 rfkill snd_hda_codec_idt snd_hda_codec_generic snd_hda_intel snd_hda_codec psmouse input_leds lpc_ich snd_hda_core snd_hwdep snd_pcm snd_timer snd amdkfd amd_iommu_v2 radeon soundcore ttm wmi thermal parport_pc parport battery hp_accel evdev lis3lv02d input_polldev led_class mac_hid hp_wireless tpm_tis ac tpm_tis_core shpchp mei_me tpm mei tcp_westwood
[12761.758855] mmc0: card 1234 removed
[114219.624135] mmc0: cannot verify signal voltage switch
[114219.778389] mmc0: new ultra high speed SDR50 SDHC card at address 1234
[114219.778669] mmcblk0: mmc0:1234 SA16G 14.4 GiB
[114219.779486] mmcblk0: p1Any ideas are welcomed!
Thank you in advance!
Last edited by amaro (2017-11-25 20:38:22)
Offline
Can you manually mount /dev/mmcblk0p1 on Arch?
Offline
I tried
sudo su
[root@ahp vb]# mkdir /mnt/sdc
[root@ahp vb]# mount /dev/mmcblk0p1 /mnt/sdcAfter the last command the terminal becomes unresponsive. I have to either close and restart it or open new tab and close the working one.
Offline
Can you reproduce the issue with a stock Arch kernel?
Offline
I have two kernels available linux-ck-ivybridge-4.13.10-1 and linux-lts312-ck-3.12.57-1
Offline
Offline
I checked the kernel version on LM. It's 3.13.0-24. So I tried with linux-lts312-ck-3.12.57-1. SD card mounts fine.
Last edited by amaro (2017-11-25 19:11:13)
Offline
x33a wrote:Can you reproduce the issue with a stock Arch kernel?
Offline
@amaro it is a known issue with linux-ck-ivybridge-4.13.10-1 either use the boot options scsi_mod.use_blk_mq=0 elevator=cfq or update to the latest version of the package.
Edit:
@slithery / @jasonwryan it should be 56414 the arch kernel is affected but you need to specify elevator=bfq to trigger it linux-ck 4.13.10-1 was more susceptible as that effectively made that a default.
Last edited by loqs (2017-11-25 19:24:35)
Offline
My eyes are very sensitive. I use kernels my eyes can work with. Anything else I can help you with so that you can help me, if you'd like, gentlemen?
Offline
Thank you very much, loqs! I appreciate your help!
Offline
My eyes are very sensitive. I use kernels my eyes can work with. Anything else I can help you with so that you can help me, if you'd like, gentlemen?
If you want help here, then testing against vanilla (ie., supported) kernels is the minumum requirement. And what does eyesight have to do with linux-ck?
Offline
I'll do the test. Is this the one you are refering to https://www.archlinux.org/packages/core/x86_64/linux/?
P.S.
Turns out kernel issue. Adding the following to grub solves the problem.
scsi_mod.use_blk_mq=0 elevator=cfqThank you very much, loqs!
P.P.S. With the stock kernel the sd card also works.
Last edited by amaro (2017-11-25 20:40:41)
Offline
I would suggest you update the linux-ck kernel to the latest version which does not have that issue and contains numerous other fixes from upstream.
Offline