You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2017-12-21 02:35:19
- Astrades
- Member
- Registered: 2017-12-21
- Posts: 3
i3wm Black Screen: Graphics Driver Issues
Hey guys. So, I have a refurbished Lenovo ThinkPad T420 and I was originally having some issues with i3 an dgetting a black screen, but I've deduced it to a graphics driver issue. At the moment, I have the open source nvidia driver package xf86-video-nouveau-1.0.15-2 (it was suggested in a bit of an older forum post to get i3 working). I installed that and rebooted, but it still doesn't work; just a black screen. To find out my graphics card to research packages, I used neofetch to see which one I have: the NVIDIA Quadro NVS 4200M . I'm not very sure which graphics driver package would be used for this card. Does anyone have any ideas? Thanks for reading.
Offline
#2 2017-12-21 02:57:44
- Trilby
- Inspector Parrot
- Registered: 2011-11-29
- Posts: 30,543
- Website
Re: i3wm Black Screen: Graphics Driver Issues
Follow the steps below and report back the results of the commands:
https://wiki.archlinux.org/index.php/Xo … stallation
"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman
Offline
#3 2017-12-21 03:01:46
- Astrades
- Member
- Registered: 2017-12-21
- Posts: 3
Re: i3wm Black Screen: Graphics Driver Issues
Trilby wrote:
Follow the steps below and report back the results of the commands:
https://wiki.archlinux.org/index.php/Xo … stallation
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF119M [Quadro NVS 4200M] (rev a1)
Last edited by Astrades (2017-12-21 03:20:38)
Offline
#4 2017-12-21 08:40:10
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 25,435
Re: i3wm Black Screen: Graphics Driver Issues
Post a Xorg.log and a dmesg and use [ code ] tags for command output
Last edited by V1del (2017-12-21 08:40:30)
Offline
#5 2017-12-21 17:31:29
- Astrades
- Member
- Registered: 2017-12-21
- Posts: 3
Re: i3wm Black Screen: Graphics Driver Issues
V1del wrote:
Post a Xorg.log and a dmesg and use [ code ] tags for command output
Alright, here ya go. It looks like I'm missing fonts and modules.
Here is the xorg.0.log below:
[ 100.599] (--) Log file renamed from "/var/log/Xorg.pid-567.log" to "/var/log/Xorg.0.log"
[ 100.600]
X.Org X Server 1.19.5
Release Date: 2017-10-12
[ 100.600] X Protocol Version 11, Revision 0
[ 100.600] Build Operating System: Linux 4.9.54-1-lts x86_64
[ 100.600] Current Operating System: Linux archlinux 4.14.6-1-ARCH #1 SMP PREEMPT Thu Dec 14 21:26:16 UTC 2017 x86_64
[ 100.600] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b5a34e6f-9ca3-4bb0-b31d-6e37eea21bd2 rw quiet
[ 100.600] Build Date: 12 October 2017 09:59:53PM
[ 100.600]
[ 100.600] Current version of pixman: 0.34.0
[ 100.600] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 100.600] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 100.600] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 20 20:53:54 2017
[ 100.601] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 100.602] (==) No Layout section. Using the first Screen section.
[ 100.602] (==) No screen section available. Using defaults.
[ 100.602] (**) |-->Screen "Default Screen Section" (0)
[ 100.602] (**) | |-->Monitor "<default monitor>"
[ 100.602] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 100.602] (==) Automatically adding devices
[ 100.602] (==) Automatically enabling devices
[ 100.602] (==) Automatically adding GPU devices
[ 100.602] (==) Automatically binding GPU devices
[ 100.602] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 100.602] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 100.602] Entry deleted from font path.
[ 100.602] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 100.602] Entry deleted from font path.
[ 100.602] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 100.602] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 100.602] Entry deleted from font path.
[ 100.602] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 100.602] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 100.602] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 100.602] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 100.603] (II) Loader magic: 0x55ebf3597d60
[ 100.603] (II) Module ABI versions:
[ 100.603] X.Org ANSI C Emulation: 0.4
[ 100.603] X.Org Video Driver: 23.0
[ 100.603] X.Org XInput driver : 24.1
[ 100.603] X.Org Server Extension : 10.0
[ 100.603] (++) using VT number 2
[ 100.606] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 100.607] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 100.608] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 12 paused 0
[ 100.608] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 100.608] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0
[ 100.610] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules"
[ 100.610] (**) OutputClass "nvidia" setting /dev/dri/card1 as PrimaryGPU
[ 100.611] (--) PCI: (0:0:2:0) 8086:0126:17aa:21d0 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
[ 100.611] (--) PCI:*(0:1:0:0) 10de:1057:17aa:21d0 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 100.612] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 100.612] (II) LoadModule: "glx"
[ 100.612] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[ 100.659] (II) Module glx: vendor="NVIDIA Corporation"
[ 100.659] compiled for 4.0.2, module version = 1.0.0
[ 100.659] Module class: X.Org Server Extension
[ 100.660] (II) NVIDIA GLX Module 387.34 Tue Nov 21 02:04:31 PST 2017
[ 100.661] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[ 100.661] loading driver: nvidia
[ 100.661] (II) Applying OutputClass "intel" to /dev/dri/card0
[ 100.661] loading driver: modesetting
[ 100.661] (==) Matched nvidia as autoconfigured driver 0
[ 100.661] (==) Matched nouveau as autoconfigured driver 1
[ 100.661] (==) Matched nv as autoconfigured driver 2
[ 100.661] (==) Matched modesetting as autoconfigured driver 3
[ 100.661] (==) Matched intel as autoconfigured driver 4
[ 100.661] (==) Matched nouveau as autoconfigured driver 5
[ 100.661] (==) Matched nv as autoconfigured driver 6
[ 100.661] (==) Matched modesetting as autoconfigured driver 7
[ 100.661] (==) Matched fbdev as autoconfigured driver 8
[ 100.661] (==) Matched vesa as autoconfigured driver 9
[ 100.661] (==) Assigned the driver to the xf86ConfigLayout
[ 100.661] (II) LoadModule: "nvidia"
[ 100.662] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 100.668] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 100.668] compiled for 4.0.2, module version = 1.0.0
[ 100.668] Module class: X.Org Video Driver
[ 100.669] (II) LoadModule: "nouveau"
[ 100.669] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 100.671] (II) Module nouveau: vendor="X.Org Foundation"
[ 100.671] compiled for 1.19.3, module version = 1.0.15
[ 100.671] Module class: X.Org Video Driver
[ 100.671] ABI class: X.Org Video Driver, version 23.0
[ 100.671] (II) LoadModule: "nv"
[ 100.671] (WW) Warning, couldn't open module nv
[ 100.671] (II) UnloadModule: "nv"
[ 100.671] (II) Unloading nv
[ 100.671] (EE) Failed to load module "nv" (module does not exist, 0)
[ 100.671] (II) LoadModule: "modesetting"
[ 100.672] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 100.673] (II) Module modesetting: vendor="X.Org Foundation"
[ 100.673] compiled for 1.19.5, module version = 1.19.5
[ 100.673] Module class: X.Org Video Driver
[ 100.673] ABI class: X.Org Video Driver, version 23.0
[ 100.673] (II) LoadModule: "intel"
[ 100.673] (WW) Warning, couldn't open module intel
[ 100.673] (II) UnloadModule: "intel"
[ 100.673] (II) Unloading intel
[ 100.673] (EE) Failed to load module "intel" (module does not exist, 0)
[ 100.673] (II) LoadModule: "fbdev"
[ 100.673] (WW) Warning, couldn't open module fbdev
[ 100.673] (II) UnloadModule: "fbdev"
[ 100.673] (II) Unloading fbdev
[ 100.673] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 100.673] (II) LoadModule: "vesa"
[ 100.673] (WW) Warning, couldn't open module vesa
[ 100.673] (II) UnloadModule: "vesa"
[ 100.673] (II) Unloading vesa
[ 100.673] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 100.673] (II) NVIDIA dlloader X Driver 387.34 Tue Nov 21 01:38:22 PST 2017
[ 100.673] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 100.674] (II) NOUVEAU driver
[ 100.674] (II) NOUVEAU driver for NVIDIA chipset families :
[ 100.674] RIVA TNT (NV04)
[ 100.674] RIVA TNT2 (NV05)
[ 100.674] GeForce 256 (NV10)
[ 100.674] GeForce 2 (NV11, NV15)
[ 100.674] GeForce 4MX (NV17, NV18)
[ 100.674] GeForce 3 (NV20)
[ 100.674] GeForce 4Ti (NV25, NV28)
[ 100.674] GeForce FX (NV3x)
[ 100.674] GeForce 6 (NV4x)
[ 100.674] GeForce 7 (G7x)
[ 100.674] GeForce 8 (G8x)
[ 100.674] GeForce GTX 200 (NVA0)
[ 100.674] GeForce GTX 400 (NVC0)
[ 100.674] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 100.675] (II) systemd-logind: releasing fd for 226:1
[ 100.677] (II) Loading sub module "fb"
[ 100.677] (II) LoadModule: "fb"
[ 100.677] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 100.678] (II) Module fb: vendor="X.Org Foundation"
[ 100.678] compiled for 1.19.5, module version = 1.0.0
[ 100.678] ABI class: X.Org ANSI C Emulation, version 0.4
[ 100.678] (II) Loading sub module "wfb"
[ 100.678] (II) LoadModule: "wfb"
[ 100.679] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 100.680] (II) Module wfb: vendor="X.Org Foundation"
[ 100.680] compiled for 1.19.5, module version = 1.0.0
[ 100.680] ABI class: X.Org ANSI C Emulation, version 0.4
[ 100.680] (II) Loading sub module "ramdac"
[ 100.680] (II) LoadModule: "ramdac"
[ 100.680] (II) Module "ramdac" already built-in
[ 100.683] (WW) Falling back to old probe method for modesetting
[ 100.683] (II) modeset(G0): using drv /dev/dri/card0
[ 100.683] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 100.683] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 100.683] (==) NVIDIA(0): RGB weight 888
[ 100.683] (==) NVIDIA(0): Default visual is TrueColor
[ 100.683] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 100.684] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[ 100.684] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 100.684] (**) NVIDIA(0): Enabling 2D acceleration
[ 101.216] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 101.216] (--) NVIDIA(0): CRT-0
[ 101.216] (--) NVIDIA(0): DFP-0
[ 101.216] (--) NVIDIA(0): DFP-1
[ 101.216] (--) NVIDIA(0): DFP-2
[ 101.216] (--) NVIDIA(0): DFP-3
[ 101.216] (--) NVIDIA(0): DFP-4
[ 101.216] (--) NVIDIA(0): DFP-5
[ 101.216] (--) NVIDIA(0): DFP-6
[ 101.217] (II) NVIDIA(0): NVIDIA GPU NVS 4200M (GF119) at PCI:1:0:0 (GPU-0)
[ 101.217] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 101.217] (--) NVIDIA(0): VideoBIOS: 75.19.15.01.02
[ 101.217] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 101.218] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 101.218] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 101.218] (--) NVIDIA(GPU-0):
[ 101.220] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 101.220] (--) NVIDIA(GPU-0): DFP-0: Internal LVDS
[ 101.220] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 101.220] (--) NVIDIA(GPU-0):
[ 101.220] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 101.220] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 101.220] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 101.220] (--) NVIDIA(GPU-0):
[ 101.221] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 101.221] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 101.221] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 101.221] (--) NVIDIA(GPU-0):
[ 101.221] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 101.221] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 101.221] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 101.221] (--) NVIDIA(GPU-0):
[ 101.221] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 101.221] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[ 101.221] (--) NVIDIA(GPU-0): DFP-4: 480.0 MHz maximum pixel clock
[ 101.221] (--) NVIDIA(GPU-0):
[ 101.221] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 101.221] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[ 101.221] (--) NVIDIA(GPU-0): DFP-5: 480.0 MHz maximum pixel clock
[ 101.221] (--) NVIDIA(GPU-0):
[ 101.221] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 101.221] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[ 101.221] (--) NVIDIA(GPU-0): DFP-6: 480.0 MHz maximum pixel clock
[ 101.221] (--) NVIDIA(GPU-0):
[ 101.221] (==) NVIDIA(0):
[ 101.221] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 101.221] (==) NVIDIA(0): will be used as the requested mode.
[ 101.221] (==) NVIDIA(0):
[ 101.221] (--) NVIDIA(0): No enabled display devices found; starting anyway because
[ 101.221] (--) NVIDIA(0): AllowEmptyInitialConfiguration is enabled
[ 101.221] (II) NVIDIA(0): Validated MetaModes:
[ 101.221] (II) NVIDIA(0): "NULL"
[ 101.221] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 101.221] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 101.221] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 101.221] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 101.221] (==) modeset(G0): RGB weight 888
[ 101.221] (==) modeset(G0): Default visual is TrueColor
[ 101.221] (II) Loading sub module "glamoregl"
[ 101.221] (II) LoadModule: "glamoregl"
[ 101.221] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 101.223] (II) Module glamoregl: vendor="X.Org Foundation"
[ 101.223] compiled for 1.19.5, module version = 1.0.0
[ 101.223] ABI class: X.Org ANSI C Emulation, version 0.4
[ 101.223] (II) glamor: OpenGL accelerated X.org driver based.
[ 101.237] (II) glamor: EGL version 1.4 (DRI2):
[ 101.240] (II) modeset(G0): glamor initialized
[ 101.240] (II) modeset(G0): Output LVDS-1-1 has no monitor section
[ 101.245] (II) modeset(G0): Output VGA-1-1 has no monitor section
[ 101.254] (II) modeset(G0): EDID for output LVDS-1-1
[ 101.254] (II) modeset(G0): Manufacturer: LGD Model: 2e2 Serial#: 0
[ 101.254] (II) modeset(G0): Year: 2010 Week: 0
[ 101.254] (II) modeset(G0): EDID Version: 1.3
[ 101.254] (II) modeset(G0): Digital Display Input
[ 101.254] (II) modeset(G0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 101.254] (II) modeset(G0): Gamma: 2.20
[ 101.254] (II) modeset(G0): No DPMS capabilities specified
[ 101.254] (II) modeset(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 101.254] (II) modeset(G0): First detailed timing is preferred mode
[ 101.254] (II) modeset(G0): redX: 0.591 redY: 0.348 greenX: 0.340 greenY: 0.558
[ 101.254] (II) modeset(G0): blueX: 0.157 blueY: 0.129 whiteX: 0.313 whiteY: 0.329
[ 101.254] (II) modeset(G0): Manufacturer's mask: 0
[ 101.255] (II) modeset(G0): Supported detailed timing:
[ 101.255] (II) modeset(G0): clock: 96.0 MHz Image Size: 310 x 174 mm
[ 101.255] (II) modeset(G0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1728 h_border: 0
[ 101.255] (II) modeset(G0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
[ 101.255] (II) modeset(G0): LG Display
[ 101.255] (II) modeset(G0): LP140WD2-TLB1
[ 101.255] (II) modeset(G0): EDID (in hex):
[ 101.255] (II) modeset(G0): 00ffffffffffff0030e4e20200000000
[ 101.255] (II) modeset(G0): 00140103801f11780a43459759578e28
[ 101.255] (II) modeset(G0): 21505400000001010101010101010101
[ 101.255] (II) modeset(G0): 0101010101018025408060841a303020
[ 101.255] (II) modeset(G0): 350036ae100000190000000000000000
[ 101.255] (II) modeset(G0): 00000000000000000000000000fe004c
[ 101.255] (II) modeset(G0): 4720446973706c61790a2020000000fe
[ 101.255] (II) modeset(G0): 004c503134305744322d544c42310038
[ 101.255] (II) modeset(G0): Printing probed modes for output LVDS-1-1
[ 101.255] (II) modeset(G0): Modeline "1600x900"x60.0 96.00 1600 1648 1680 1728 900 903 908 926 -hsync -vsync (55.6 kHz eP)
[ 101.255] (II) modeset(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 101.255] (II) modeset(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 101.255] (II) modeset(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 101.255] (II) modeset(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 101.255] (II) modeset(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 101.255] (II) modeset(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 101.255] (II) modeset(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 101.255] (II) modeset(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 101.255] (II) modeset(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 101.255] (II) modeset(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 101.255] (II) modeset(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 101.255] (II) modeset(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 101.255] (II) modeset(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 101.255] (II) modeset(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 101.255] (II) modeset(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 101.255] (II) modeset(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 101.259] (II) modeset(G0): EDID for output VGA-1-1
[ 101.259] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 101.259] (==) modeset(G0): DPI set to (96, 96)
[ 101.259] (II) Loading sub module "fb"
[ 101.259] (II) LoadModule: "fb"
[ 101.259] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 101.259] (II) Module fb: vendor="X.Org Foundation"
[ 101.259] compiled for 1.19.5, module version = 1.0.0
[ 101.259] ABI class: X.Org ANSI C Emulation, version 0.4
[ 101.259] (II) UnloadModule: "nouveau"
[ 101.259] (II) Unloading nouveau
[ 101.259] (--) Depth 24 pixmap format is 32 bpp
[ 101.319] (==) modeset(G0): Backing store enabled
[ 101.319] (==) modeset(G0): Silken mouse enabled
[ 101.320] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 101.338] (==) modeset(G0): DPMS enabled
[ 101.338] (II) modeset(G0): [DRI2] Setup complete
[ 101.338] (II) modeset(G0): [DRI2] DRI driver: i965
[ 101.338] (II) modeset(G0): [DRI2] VDPAU driver: i965
[ 101.339] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[ 101.339] (II) NVIDIA: access.
[ 101.358] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 101.358] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 101.358] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 101.358] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 101.358] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 101.358] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 101.358] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 101.358] (II) NVIDIA(0): Config Options in the README.
[ 101.367] (II) NVIDIA(0): Setting mode "NULL"
[ 101.372] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 101.372] (==) NVIDIA(0): Backing store enabled
[ 101.372] (==) NVIDIA(0): Silken mouse enabled
[ 101.372] (==) NVIDIA(0): DPMS enabled
[ 101.373] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 101.373] (II) Loading sub module "dri2"
[ 101.373] (II) LoadModule: "dri2"
[ 101.373] (II) Module "dri2" already built-in
[ 101.373] (II) NVIDIA(0): [DRI2] Setup complete
[ 101.373] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 101.373] (--) RandR disabled
[ 101.375] (II) Initializing extension GLX
[ 101.375] (II) Indirect GLX disabled.
[ 101.628] (II) modeset(G0): Damage tracking initialized
[ 101.691] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 101.691] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 101.691] (II) LoadModule: "libinput"
[ 101.691] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 101.693] (II) Module libinput: vendor="X.Org Foundation"
[ 101.693] compiled for 1.19.3, module version = 0.26.0
[ 101.693] Module class: X.Org XInput Driver
[ 101.693] ABI class: X.Org XInput driver, version 24.1
[ 101.693] (II) Using input driver 'libinput' for 'Power Button'
[ 101.694] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 41 paused 0
[ 101.694] (**) Power Button: always reports core events
[ 101.694] (**) Option "Device" "/dev/input/event3"
[ 101.694] (**) Option "_source" "server/udev"
[ 101.695] (II) event3 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 101.695] (II) event3 - (II) Power Button: (II) device is a keyboard
[ 101.695] (II) event3 - (II) Power Button: (II) device removed
[ 101.695] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 101.695] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 101.695] (II) event3 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 101.695] (II) event3 - (II) Power Button: (II) device is a keyboard
[ 101.696] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 101.696] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 101.696] (II) Using input driver 'libinput' for 'Video Bus'
[ 101.697] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 44 paused 0
[ 101.697] (**) Video Bus: always reports core events
[ 101.697] (**) Option "Device" "/dev/input/event7"
[ 101.697] (**) Option "_source" "server/udev"
[ 101.697] (II) event7 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 101.697] (II) event7 - (II) Video Bus: (II) device is a keyboard
[ 101.697] (II) event7 - (II) Video Bus: (II) device removed
[ 101.697] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event7"
[ 101.697] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 101.698] (II) event7 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 101.698] (II) event7 - (II) Video Bus: (II) device is a keyboard
[ 101.698] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 101.698] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 101.698] (II) Using input driver 'libinput' for 'Video Bus'
[ 101.699] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 45 paused 0
[ 101.699] (**) Video Bus: always reports core events
[ 101.699] (**) Option "Device" "/dev/input/event8"
[ 101.699] (**) Option "_source" "server/udev"
[ 101.700] (II) event8 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 101.700] (II) event8 - (II) Video Bus: (II) device is a keyboard
[ 101.700] (II) event8 - (II) Video Bus: (II) device removed
[ 101.700] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input10/event8"
[ 101.700] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 101.701] (II) event8 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 101.701] (II) event8 - (II) Video Bus: (II) device is a keyboard
[ 101.702] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 101.702] (II) No input driver specified, ignoring this device.
[ 101.702] (II) This device may have been added with another device file.
[ 101.702] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 101.702] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 101.702] (II) Using input driver 'libinput' for 'Sleep Button'
[ 101.703] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 46 paused 0
[ 101.703] (**) Sleep Button: always reports core events
[ 101.703] (**) Option "Device" "/dev/input/event2"
[ 101.703] (**) Option "_source" "server/udev"
[ 101.704] (II) event2 - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[ 101.704] (II) event2 - (II) Sleep Button: (II) device is a keyboard
[ 101.704] (II) event2 - (II) Sleep Button: (II) device removed
[ 101.704] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
[ 101.704] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 101.704] (II) event2 - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[ 101.704] (II) event2 - (II) Sleep Button: (II) device is a keyboard
[ 101.705] (II) config/udev: Adding input device Integrated Camera: Integrated C (/dev/input/event6)
[ 101.705] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[ 101.705] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated C'
[ 101.706] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 47 paused 0
[ 101.706] (**) Integrated Camera: Integrated C: always reports core events
[ 101.706] (**) Option "Device" "/dev/input/event6"
[ 101.706] (**) Option "_source" "server/udev"
[ 101.707] (II) event6 - (II) Integrated Camera: Integrated C: (II) is tagged by udev as: Keyboard
[ 101.707] (II) event6 - (II) Integrated Camera: Integrated C: (II) device is a keyboard
[ 101.707] (II) event6 - (II) Integrated Camera: Integrated C: (II) device removed
[ 101.707] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8/event6"
[ 101.707] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated C" (type: KEYBOARD, id 10)
[ 101.708] (II) event6 - (II) Integrated Camera: Integrated C: (II) is tagged by udev as: Keyboard
[ 101.708] (II) event6 - (II) Integrated Camera: Integrated C: (II) device is a keyboard
[ 101.708] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 101.708] (II) No input driver specified, ignoring this device.
[ 101.708] (II) This device may have been added with another device file.
[ 101.709] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 101.709] (II) No input driver specified, ignoring this device.
[ 101.709] (II) This device may have been added with another device file.
[ 101.709] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event11)
[ 101.709] (II) No input driver specified, ignoring this device.
[ 101.709] (II) This device may have been added with another device file.
[ 101.709] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event12)
[ 101.709] (II) No input driver specified, ignoring this device.
[ 101.709] (II) This device may have been added with another device file.
[ 101.710] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[ 101.710] (II) No input driver specified, ignoring this device.
[ 101.710] (II) This device may have been added with another device file.
[ 101.710] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 101.710] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 101.710] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 101.711] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 48 paused 0
[ 101.711] (**) AT Translated Set 2 keyboard: always reports core events
[ 101.711] (**) Option "Device" "/dev/input/event0"
[ 101.711] (**) Option "_source" "server/udev"
[ 101.711] (II) event0 - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 101.711] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 101.711] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device removed
[ 101.712] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 101.712] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 101.712] (II) event0 - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 101.712] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 101.712] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[ 101.712] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 101.713] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 101.713] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 101.713] (II) LoadModule: "synaptics"
[ 101.713] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 101.714] (II) Module synaptics: vendor="X.Org Foundation"
[ 101.714] compiled for 1.19.0, module version = 1.9.0
[ 101.714] Module class: X.Org XInput Driver
[ 101.714] ABI class: X.Org XInput driver, version 24.1
[ 101.714] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 101.714] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 49 paused 0
[ 101.714] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 101.714] (**) Option "Device" "/dev/input/event14"
[ 101.714] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 101.715] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888 (res 75)
[ 101.715] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820 (res 105)
[ 101.715] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 101.715] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 101.715] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 101.715] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 101.715] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 101.715] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 101.715] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event14"
[ 101.715] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 101.715] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 101.715] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 101.715] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[ 101.715] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 101.715] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 101.715] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 101.715] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 101.715] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 101.715] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 101.715] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 101.716] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event15)
[ 101.716] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"
[ 101.716] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[ 101.716] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 50 paused 0
[ 101.716] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 101.716] (**) Option "Device" "/dev/input/event15"
[ 101.716] (**) Option "_source" "server/udev"
[ 101.717] (II) event15 - (II) TPPS/2 IBM TrackPoint: (II) is tagged by udev as: Mouse Pointingstick
[ 101.717] (II) event15 - (II) TPPS/2 IBM TrackPoint: (II) trackpoint device set to range 20
[ 101.717] (II) event15 - (II) TPPS/2 IBM TrackPoint: (II) device is a pointer
[ 101.717] (II) event15 - (II) TPPS/2 IBM TrackPoint: (II) device removed
[ 101.717] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input16/event15"
[ 101.717] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
[ 101.717] (**) Option "AccelerationScheme" "none"
[ 101.717] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[ 101.717] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 101.717] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 101.717] (II) event15 - (II) TPPS/2 IBM TrackPoint: (II) is tagged by udev as: Mouse Pointingstick
[ 101.717] (II) event15 - (II) TPPS/2 IBM TrackPoint: (II) trackpoint device set to range 20
[ 101.717] (II) event15 - (II) TPPS/2 IBM TrackPoint: (II) device is a pointer
[ 101.717] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 101.718] (II) No input driver specified, ignoring this device.
[ 101.718] (II) This device may have been added with another device file.
[ 101.718] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 101.718] (II) No input driver specified, ignoring this device.
[ 101.718] (II) This device may have been added with another device file.
[ 101.718] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event4)
[ 101.718] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[ 101.718] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[ 101.719] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 51 paused 0
[ 101.719] (**) ThinkPad Extra Buttons: always reports core events
[ 101.719] (**) Option "Device" "/dev/input/event4"
[ 101.719] (**) Option "_source" "server/udev"
[ 101.719] (II) event4 - (II) ThinkPad Extra Buttons: (II) is tagged by udev as: Keyboard Switch
[ 101.719] (II) event4 - (II) ThinkPad Extra Buttons: (II) device is a keyboard
[ 101.719] (II) event4 - (II) ThinkPad Extra Buttons: (II) device removed
[ 101.719] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event4"
[ 101.719] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
[ 101.720] (II) event4 - (II) ThinkPad Extra Buttons: (II) is tagged by udev as: Keyboard Switch
[ 101.720] (II) event4 - (II) ThinkPad Extra Buttons: (II) device is a keyboard
[ 122.566] (**) Option "fd" "41"
[ 122.566] (II) event3 - (II) Power Button: (II) device removed
[ 122.568] (**) Option "fd" "44"
[ 122.568] (II) event7 - (II) Video Bus: (II) device removed
[ 122.568] (**) Option "fd" "45"
[ 122.568] (II) event8 - (II) Video Bus: (II) device removed
[ 122.568] (**) Option "fd" "46"
[ 122.568] (II) event2 - (II) Sleep Button: (II) device removed
[ 122.568] (**) Option "fd" "47"
[ 122.568] (II) event6 - (II) Integrated Camera: Integrated C: (II) device removed
[ 122.568] (**) Option "fd" "48"
[ 122.568] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device removed
[ 122.568] (**) Option "fd" "50"
[ 122.568] (II) event15 - (II) TPPS/2 IBM TrackPoint: (II) device removed
[ 122.569] (**) Option "fd" "51"
[ 122.569] (II) event4 - (II) ThinkPad Extra Buttons: (II) device removed
[ 122.583] (II) UnloadModule: "libinput"
[ 122.583] (II) systemd-logind: releasing fd for 13:68
[ 122.586] (EE) systemd-logind: failed to release device: Connection was disconnected before a reply was received
[ 122.594] (II) UnloadModule: "libinput"
[ 122.594] (II) systemd-logind: releasing fd for 13:79
[ 122.594] (EE) systemd-logind: failed to release device: Connection is closed
[ 122.623] (II) UnloadModule: "synaptics"
[ 122.623] (II) systemd-logind: releasing fd for 13:78
[ 122.623] (EE) systemd-logind: failed to release device: Connection is closed
[ 122.653] (II) UnloadModule: "libinput"
[ 122.653] (II) systemd-logind: releasing fd for 13:64
[ 122.653] (EE) systemd-logind: failed to release device: Connection is closed
[ 122.670] (II) UnloadModule: "libinput"
[ 122.670] (II) systemd-logind: releasing fd for 13:70
[ 122.670] (EE) systemd-logind: failed to release device: Connection is closed
[ 122.700] (II) UnloadModule: "libinput"
[ 122.700] (II) systemd-logind: releasing fd for 13:66
[ 122.700] (EE) systemd-logind: failed to release device: Connection is closed
[ 122.716] (II) UnloadModule: "libinput"
[ 122.716] (II) systemd-logind: releasing fd for 13:72
[ 122.716] (EE) systemd-logind: failed to release device: Connection is closed
[ 122.757] (II) UnloadModule: "libinput"
[ 122.757] (II) systemd-logind: releasing fd for 13:71
[ 122.757] (EE) systemd-logind: failed to release device: Connection is closed
[ 122.810] (II) UnloadModule: "libinput"
[ 122.810] (II) systemd-logind: releasing fd for 13:67
[ 122.810] (EE) systemd-logind: failed to release device: Connection is closed
[ 122.898] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 122.898] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[ 122.898] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[ 122.898] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[ 122.898] (EE) systemd-logind: ReleaseControl failed: Connection is closed
[ 122.898] (II) Server terminated successfully (0). Closing log file.Here's the dmesg below:
[ 0.000000] Linux version 4.14.6-1-ARCH (builduser@heftig-8098) (gcc version 7.2.1 20171128 (GCC)) #1 SMP PREEMPT Thu Dec 14 21:26:16 UTC 2017
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b5a34e6f-9ca3-4bb0-b31d-6e37eea21bd2 rw quiet
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba99efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba99f000-0x00000000bae9efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae9f000-0x00000000baf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd20000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023e5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: LENOVO 4180BJ1/4180BJ1, BIOS 83ET61WW (1.31 ) 07/07/2011
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x23e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 3 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask FC0000000 write-back
[ 0.000000] 6 base 23F000000 mask FFF000000 uncachable
[ 0.000000] 7 base 23E800000 mask FFF800000 uncachable
[ 0.000000] 8 base 23E600000 mask FFFE00000 uncachable
[ 0.000000] 9 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff882880097000] 97000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] BRK [0x20a213000, 0x20a213fff] PGTABLE
[ 0.000000] BRK [0x20a214000, 0x20a214fff] PGTABLE
[ 0.000000] BRK [0x20a215000, 0x20a215fff] PGTABLE
[ 0.000000] BRK [0x20a216000, 0x20a216fff] PGTABLE
[ 0.000000] BRK [0x20a217000, 0x20a217fff] PGTABLE
[ 0.000000] BRK [0x20a218000, 0x20a218fff] PGTABLE
[ 0.000000] BRK [0x20a219000, 0x20a219fff] PGTABLE
[ 0.000000] BRK [0x20a21a000, 0x20a21afff] PGTABLE
[ 0.000000] BRK [0x20a21b000, 0x20a21bfff] PGTABLE
[ 0.000000] BRK [0x20a21c000, 0x20a21cfff] PGTABLE
[ 0.000000] BRK [0x20a21d000, 0x20a21dfff] PGTABLE
[ 0.000000] BRK [0x20a21e000, 0x20a21efff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37269000-0x3792bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F00E0 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000BAFFE120 0000AC (v01 LENOVO TP-83 00001310 PTEC 00000002)
[ 0.000000] ACPI: FACP 0x00000000BAFE9000 0000F4 (v04 LENOVO TP-83 00001310 PTL 00000002)
[ 0.000000] ACPI: DSDT 0x00000000BAFEC000 00DFA4 (v01 LENOVO TP-83 00001310 INTL 20061109)
[ 0.000000] ACPI: FACS 0x00000000BAF2D000 000040
[ 0.000000] ACPI: FACS 0x00000000BAF2D000 000040
[ 0.000000] ACPI: SLIC 0x00000000BAFFD000 000176 (v01 LENOVO TP-83 00001310 PTEC 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BAFFC000 000249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BAFFB000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BAFFA000 000797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: HPET 0x00000000BAFE8000 000038 (v01 LENOVO TP-83 00001310 PTL 00000002)
[ 0.000000] ACPI: APIC 0x00000000BAFE7000 000098 (v01 LENOVO TP-83 00001310 PTL 00000002)
[ 0.000000] ACPI: MCFG 0x00000000BAFE6000 00003C (v01 LENOVO TP-83 00001310 PTL 00000002)
[ 0.000000] ACPI: ECDT 0x00000000BAFE5000 000052 (v01 LENOVO TP-83 00001310 PTL 00000002)
[ 0.000000] ACPI: ASF! 0x00000000BAFEB000 0000A5 (v32 LENOVO TP-83 00001310 PTL 00000002)
[ 0.000000] ACPI: TCPA 0x00000000BAFE4000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BAFE3000 000A27 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BAFE2000 000996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: DMAR 0x00000000BAFE1000 0000E8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: UEFI 0x00000000BAFE0000 00003E (v01 LENOVO TP-83 00001310 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x00000000BAFDF000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 0x00000000BAFDE000 00027E (v01 LENOVO TP-83 00001310 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023e5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23e5fb000-0x23e5fefff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000023e5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ba99efff]
[ 0.000000] node 0: [mem 0x00000000bafff000-0x00000000baffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000023e5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023e5fffff]
[ 0.000000] On node 0 totalpages: 2068284
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 156 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11879 pages used for memmap
[ 0.000000] DMA32 zone: 760224 pages, LIFO batch:31
[ 0.000000] Normal zone: 20376 pages used for memmap
[ 0.000000] Normal zone: 1304064 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000bba00000-0x00000000bf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba99f000-0xbae9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbae9f000-0xbaf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffd20000-0xffffffff]
[ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff882abe200000 s107032 r8192 d32232 u262144
[ 0.000000] pcpu-alloc: s107032 r8192 d32232 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2035809
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b5a34e6f-9ca3-4bb0-b31d-6e37eea21bd2 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8048748K/8273136K available (6645K kernel code, 1150K rwdata, 2788K rodata, 1312K init, 1008K bss, 224388K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 29075 entries in 114 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 8448, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2491.947 MHz processor
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4985.55 BogoMIPS (lpj=8306490)
[ 0.003333] pid_max: default: 32768 minimum: 301
[ 0.003333] ACPI: Core revision 20170728
[ 0.014385] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.014413] Security Framework initialized
[ 0.014413] Yama: becoming mindful.
[ 0.015483] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.016043] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.016075] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.016094] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.016290] Disabled fast string operations
[ 0.016292] CPU: Physical Processor ID: 0
[ 0.016292] CPU: Processor Core ID: 0
[ 0.016296] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.016297] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.016301] mce: CPU supports 7 MCE banks
[ 0.016308] CPU0: Thermal monitoring enabled (TM1)
[ 0.016316] process: using mwait in idle threads
[ 0.016319] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.016320] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.016406] Freeing SMP alternatives memory: 24K
[ 0.017734] smpboot: Max logical packages: 4
[ 0.017738] DMAR: Host address width 36
[ 0.017740] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.017748] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.017749] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.017752] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.017752] DMAR: RMRR base: 0x000000bacd5000 end: 0x000000bacebfff
[ 0.017753] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff
[ 0.017755] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.017756] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.017757] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.018185] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.018187] x2apic enabled
[ 0.018193] Switched APIC routing to cluster x2apic.
[ 0.018648] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.051669] TSC deadline timer enabled
[ 0.051672] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.063354] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.063412] core: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.063417] ... version: 3
[ 0.063418] ... bit width: 48
[ 0.063420] ... generic registers: 4
[ 0.063422] ... value mask: 0000ffffffffffff
[ 0.063423] ... max period: 00007fffffffffff
[ 0.063425] ... fixed-purpose events: 3
[ 0.063427] ... event mask: 000000070000000f
[ 0.070008] Hierarchical SRCU implementation.
[ 0.083564] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.090007] smp: Bringing up secondary CPUs ...
[ 0.116696] x86: Booting SMP configuration:
[ 0.116699] .... node #0, CPUs: #1
[ 0.003333] Disabled fast string operations
[ 0.143367] #2
[ 0.003333] Disabled fast string operations
[ 0.170027] #3
[ 0.003333] Disabled fast string operations
[ 0.172783] smp: Brought up 1 node, 4 CPUs
[ 0.172783] smpboot: Total of 4 processors activated (19943.22 BogoMIPS)
[ 0.173634] devtmpfs: initialized
[ 0.173634] x86/mm: Memory block size: 128MB
[ 0.173967] PM: Registering ACPI NVS region [mem 0xbae9f000-0xbaf9efff] (1048576 bytes)
[ 0.173967] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.173967] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.173967] pinctrl core: initialized pinctrl subsystem
[ 0.173967] RTC time: 4:54:37, date: 12/21/17
[ 0.173967] NET: Registered protocol family 16
[ 0.173967] cpuidle: using governor ladder
[ 0.173967] cpuidle: using governor menu
[ 0.173967] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.173967] ACPI: bus type PCI registered
[ 0.173967] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.173967] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.173967] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.173967] PCI: Using configuration type 1 for base access
[ 0.173967] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.173976] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.173976] ACPI: Added _OSI(Module Device)
[ 0.173976] ACPI: Added _OSI(Processor Device)
[ 0.173976] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.173976] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.173976] ACPI: EC: EC started
[ 0.173976] ACPI: EC: interrupt blocked
[ 0.174024] ACPI: \: Used as first EC
[ 0.174025] ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.174026] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.179037] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.185058] ACPI: Dynamic OEM Table Load:
[ 0.185066] ACPI: SSDT 0xFFFF882AB478F000 0008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.185319] ACPI: Dynamic OEM Table Load:
[ 0.185324] ACPI: SSDT 0xFFFF882AB40D3800 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.185508] ACPI: Dynamic OEM Table Load:
[ 0.185513] ACPI: SSDT 0xFFFF882AB4115400 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.186059] ACPI: Interpreter enabled
[ 0.186075] ACPI: (supports S0 S3 S4 S5)
[ 0.186076] ACPI: Using IOAPIC for interrupt routing
[ 0.186094] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.186298] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.189828] ACPI: Power Resource [PUBS] (on)
[ 0.191237] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[ 0.191999] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[ 0.195614] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.195681] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.195746] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.195812] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.195876] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.195928] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.195992] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.196055] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.196128] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.196131] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.196266] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.196326] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.196327] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.196329] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.196330] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.196340] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.196475] PCI host bridge to bus 0000:00
[ 0.196477] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.196478] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.196479] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.196480] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff window]
[ 0.196481] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
[ 0.196482] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.196489] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.196558] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.196588] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.196644] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 0.196653] pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit]
[ 0.196658] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.196661] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
[ 0.196744] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.196769] pci 0000:00:16.0: reg 0x10: [mem 0xf3925000-0xf392500f 64bit]
[ 0.196841] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.196894] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
[ 0.196914] pci 0000:00:16.3: reg 0x10: [io 0x60b0-0x60b7]
[ 0.196923] pci 0000:00:16.3: reg 0x14: [mem 0xf392c000-0xf392cfff]
[ 0.197046] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.197065] pci 0000:00:19.0: reg 0x10: [mem 0xf3900000-0xf391ffff]
[ 0.197073] pci 0000:00:19.0: reg 0x14: [mem 0xf392b000-0xf392bfff]
[ 0.197081] pci 0000:00:19.0: reg 0x18: [io 0x6080-0x609f]
[ 0.197140] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.197196] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.197217] pci 0000:00:1a.0: reg 0x10: [mem 0xf392a000-0xf392a3ff]
[ 0.197299] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.197357] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.197379] pci 0000:00:1b.0: reg 0x10: [mem 0xf3920000-0xf3923fff 64bit]
[ 0.197450] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.197515] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.197640] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.197715] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.197851] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.197926] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.198063] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.198136] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.198273] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.198345] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.198367] pci 0000:00:1d.0: reg 0x10: [mem 0xf3929000-0xf39293ff]
[ 0.198449] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.198506] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[ 0.198659] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.198676] pci 0000:00:1f.2: reg 0x10: [io 0x60a8-0x60af]
[ 0.198683] pci 0000:00:1f.2: reg 0x14: [io 0x60bc-0x60bf]
[ 0.198691] pci 0000:00:1f.2: reg 0x18: [io 0x60a0-0x60a7]
[ 0.198698] pci 0000:00:1f.2: reg 0x1c: [io 0x60b8-0x60bb]
[ 0.198705] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
[ 0.198713] pci 0000:00:1f.2: reg 0x24: [mem 0xf3928000-0xf39287ff]
[ 0.198752] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.198804] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.198822] pci 0000:00:1f.3: reg 0x10: [mem 0xf3924000-0xf39240ff 64bit]
[ 0.198842] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.198947] pci 0000:01:00.0: [10de:1057] type 00 class 0x030000
[ 0.198966] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
[ 0.198978] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.198990] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.198997] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
[ 0.199004] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.199011] pci 0000:01:00.0: enabling Extended Tags
[ 0.206701] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.206707] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.206712] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
[ 0.206720] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.206820] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.207032] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
[ 0.207242] pci 0000:03:00.0: reg 0x10: [mem 0xf3800000-0xf3801fff 64bit]
[ 0.207975] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.216824] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.216831] pci 0000:00:1c.1: bridge window [mem 0xf3800000-0xf38fffff]
[ 0.216918] acpiphp: Slot [1] registered
[ 0.216924] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.216929] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.216933] pci 0000:00:1c.3: bridge window [mem 0xf3000000-0xf37fffff]
[ 0.216941] pci 0000:00:1c.3: bridge window [mem 0xf1800000-0xf1ffffff 64bit pref]
[ 0.217071] pci 0000:0d:00.0: [1180:e823] type 00 class 0x088001
[ 0.217097] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.217133] pci 0000:0d:00.0: reg 0x10: [mem 0xf2800000-0xf28000ff]
[ 0.217344] pci 0000:0d:00.0: supports D1 D2
[ 0.217345] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.226750] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.226758] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.226765] pci 0000:00:1c.4: bridge window [mem 0xf2800000-0xf2ffffff]
[ 0.226778] pci 0000:00:1c.4: bridge window [mem 0xf2000000-0xf27fffff 64bit pref]
[ 0.228230] ACPI: EC: interrupt unblocked
[ 0.228236] ACPI: EC: event unblocked
[ 0.228242] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.228244] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.228295] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.228295] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.228295] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.228295] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.228295] pci 0000:00:02.0: vgaarb: no bridge control possible
[ 0.228295] vgaarb: loaded
[ 0.228295] EDAC MC: Ver: 3.0.0
[ 0.228295] PCI: Using ACPI for IRQ routing
[ 0.228356] PCI: pci_cache_line_size set to 64 bytes
[ 0.230146] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.230148] e820: reserve RAM buffer [mem 0xba99f000-0xbbffffff]
[ 0.230148] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[ 0.230149] e820: reserve RAM buffer [mem 0x23e600000-0x23fffffff]
[ 0.230232] NetLabel: Initializing
[ 0.230233] NetLabel: domain hash size = 128
[ 0.230233] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.230245] NetLabel: unlabeled traffic allowed by default
[ 0.230259] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.230259] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.232054] clocksource: Switched to clocksource hpet
[ 0.238736] VFS: Disk quotas dquot_6.6.0
[ 0.238757] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.238809] pnp: PnP ACPI init
[ 0.239174] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.239176] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.239177] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.239178] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.239179] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.239181] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.239182] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.239183] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.239184] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.239185] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.239186] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.239187] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.239188] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.239190] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.239191] system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved
[ 0.239192] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.239193] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.239198] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.239295] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.239297] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.239298] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.239299] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.239300] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.239302] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.239303] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.239304] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.239306] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.239307] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.239308] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.239309] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.239312] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.239355] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.239371] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.239388] pnp 00:04: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.239425] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.239842] pnp: PnP ACPI: found 6 devices
[ 0.246145] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.246150] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.246205] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref]
[ 0.246207] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.246209] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.246211] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
[ 0.246213] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.246215] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.246233] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.246239] pci 0000:00:1c.1: bridge window [mem 0xf3800000-0xf38fffff]
[ 0.246250] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.246253] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.246259] pci 0000:00:1c.3: bridge window [mem 0xf3000000-0xf37fffff]
[ 0.246264] pci 0000:00:1c.3: bridge window [mem 0xf1800000-0xf1ffffff 64bit pref]
[ 0.246272] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.246275] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.246281] pci 0000:00:1c.4: bridge window [mem 0xf2800000-0xf2ffffff]
[ 0.246286] pci 0000:00:1c.4: bridge window [mem 0xf2000000-0xf27fffff 64bit pref]
[ 0.246295] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.246296] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.246297] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.246298] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff window]
[ 0.246299] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
[ 0.246300] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.246301] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
[ 0.246302] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.246304] pci_bus 0000:03: resource 1 [mem 0xf3800000-0xf38fffff]
[ 0.246305] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.246306] pci_bus 0000:05: resource 1 [mem 0xf3000000-0xf37fffff]
[ 0.246307] pci_bus 0000:05: resource 2 [mem 0xf1800000-0xf1ffffff 64bit pref]
[ 0.246308] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
[ 0.246309] pci_bus 0000:0d: resource 1 [mem 0xf2800000-0xf2ffffff]
[ 0.246310] pci_bus 0000:0d: resource 2 [mem 0xf2000000-0xf27fffff 64bit pref]
[ 0.246385] NET: Registered protocol family 2
[ 0.246523] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.246644] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.246774] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.246818] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.246843] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.246899] NET: Registered protocol family 1
[ 0.246914] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.247282] PCI: CLS 64 bytes, default 64
[ 0.247320] Unpacking initramfs...
[ 0.357440] Freeing initrd memory: 6924K
[ 0.357473] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.357475] software IO TLB [mem 0xb699f000-0xba99f000] (64MB) mapped at [ffff88293699f000-ffff88293a99efff]
[ 0.357663] Scanning for low memory corruption every 60 seconds
[ 0.358213] Initialise system trusted keyrings
[ 0.358220] Key type blacklist registered
[ 0.358265] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.359144] zbud: loaded
[ 0.360401] Key type asymmetric registered
[ 0.360438] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.360468] io scheduler noop registered
[ 0.360469] io scheduler deadline registered
[ 0.360504] io scheduler cfq registered (default)
[ 0.360505] io scheduler mq-deadline registered
[ 0.360505] io scheduler kyber registered
[ 0.360523] io scheduler bfq registered
[ 0.361204] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.361205] vesafb: scrolling: redraw
[ 0.361206] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.361216] vesafb: framebuffer at 0xe0000000, mapped to 0xffff978981400000, using 3072k, total 3072k
[ 0.413211] Console: switching to colour frame buffer device 128x48
[ 0.465150] fb0: VESA VGA frame buffer device
[ 0.465163] intel_idle: MWAIT substates: 0x21120
[ 0.465164] intel_idle: v0.4.1 model 0x2A
[ 0.465294] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.468976] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.489769] 0000:00:16.3: ttyS0 at I/O 0x60b0 (irq = 19, base_baud = 115200) is a 16550A
[ 0.490194] rtc_cmos 00:02: RTC can wake from S4
[ 0.490317] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.490353] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.490362] intel_pstate: Intel P-state driver initializing
[ 0.490673] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.490741] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 0.491292] NET: Registered protocol family 10
[ 0.500430] Segment Routing with IPv6
[ 0.500483] NET: Registered protocol family 17
[ 0.501366] RAS: Correctable Errors collector initialized.
[ 0.501448] microcode: sig=0x206a7, pf=0x10, revision=0x18
[ 0.501656] microcode: Microcode Update Driver: v2.2.
[ 0.501679] sched_clock: Marking stable (501640767, 0)->(502143743, -502976)
[ 0.502258] registered taskstats version 1
[ 0.502274] Loading compiled-in X.509 certificates
[ 0.502316] zswap: loaded using pool lzo/zbud
[ 0.508562] Key type big_key registered
[ 0.509255] Magic number: 13:926:919
[ 0.509437] rtc_cmos 00:02: setting system clock to 2017-12-21 04:54:38 UTC (1513832078)
[ 0.514927] Freeing unused kernel memory: 1312K
[ 0.514928] Write protecting the kernel read-only data: 12288k
[ 0.515572] Freeing unused kernel memory: 1524K
[ 0.519814] Freeing unused kernel memory: 1308K
[ 0.571276] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.574816] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.574871] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.579696] ACPI: bus type USB registered
[ 0.579713] usbcore: registered new interface driver usbfs
[ 0.579719] usbcore: registered new interface driver hub
[ 0.579747] usbcore: registered new device driver usb
[ 0.581129] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.581197] SCSI subsystem initialized
[ 0.581360] ehci-pci: EHCI PCI platform driver
[ 0.581502] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.581510] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.581524] ehci-pci 0000:00:1a.0: debug port 2
[ 0.581663] sdhci: Secure Digital Host Controller Interface driver
[ 0.581664] sdhci: Copyright(c) Pierre Ossman
[ 0.582059] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 5)
[ 0.582380] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 0.583439] libata version 3.00 loaded.
[ 0.585427] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.585433] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf392a000
[ 0.596696] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.596924] hub 1-0:1.0: USB hub found
[ 0.596932] hub 1-0:1.0: 3 ports detected
[ 0.597214] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.597220] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.597233] ehci-pci 0000:00:1d.0: debug port 2
[ 0.599824] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.601141] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.601156] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3929000
[ 0.613441] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.613816] hub 2-0:1.0: USB hub found
[ 0.613823] hub 2-0:1.0: 3 ports detected
[ 0.613988] ahci 0000:00:1f.2: version 3.0
[ 0.614197] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.624327] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[ 0.624332] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 0.655026] scsi host0: ahci
[ 0.655354] scsi host1: ahci
[ 0.655662] scsi host2: ahci
[ 0.656023] scsi host3: ahci
[ 0.656427] scsi host4: ahci
[ 0.656801] scsi host5: ahci
[ 0.656971] ata1: SATA max UDMA/133 abar m2048@0xf3928000 port 0xf3928100 irq 26
[ 0.656975] ata2: SATA max UDMA/133 abar m2048@0xf3928000 port 0xf3928180 irq 26
[ 0.656976] ata3: DUMMY
[ 0.656980] ata4: SATA max UDMA/133 abar m2048@0xf3928000 port 0xf3928280 irq 26
[ 0.656983] ata5: SATA max UDMA/133 abar m2048@0xf3928000 port 0xf3928300 irq 26
[ 0.656984] ata6: DUMMY
[ 0.926781] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.943444] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.971253] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.971701] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 0.971708] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.976553] ata1.00: NCQ Send/Recv Log not supported
[ 0.976559] ata1.00: ATA-9: SAMSUNG MZ7GE240HMGR-00005, EXT1303Q, max UDMA/133
[ 0.976563] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.977028] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 0.977035] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.981872] ata1.00: NCQ Send/Recv Log not supported
[ 0.981889] ata1.00: configured for UDMA/133
[ 0.982408] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7GE240 303Q PQ: 0 ANSI: 5
[ 1.074687] hub 1-1:1.0: USB hub found
[ 1.074905] hub 1-1:1.0: 6 ports detected
[ 1.090921] hub 2-1:1.0: USB hub found
[ 1.091116] hub 2-1:1.0: 8 ports detected
[ 1.297798] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.300843] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.301283] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.301290] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.303063] ata2.00: ATAPI: Optiarc DVD RW AD-7710H, 1.S0, max UDMA/100
[ 1.306415] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.306824] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.306830] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.308605] ata2.00: configured for UDMA/100
[ 1.310872] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7710H 1.S0 PQ: 0 ANSI: 5
[ 1.353442] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 1.360160] tsc: Refined TSC clocksource calibration: 2491.906 MHz
[ 1.360184] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23eb5badc15, max_idle_ns: 440795233937 ns
[ 1.526775] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[ 1.637769] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.706795] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[ 1.951326] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.961850] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 1.961870] sd 0:0:0:0: [sda] Write Protect is off
[ 1.961873] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.961909] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.962396] sda: sda1 sda2 sda3 sda4
[ 1.962789] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.975278] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.975281] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.975497] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.139840] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.218007] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.222202] systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 2.222295] systemd[1]: Detected architecture x86-64.
[ 2.222307] systemd[1]: No hostname configured.
[ 2.222310] systemd[1]: Set hostname to <archlinux>.
[ 2.289094] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.289122] systemd[1]: Reached target Swap.
[ 2.289152] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.289447] systemd[1]: Created slice User and Session Slice.
[ 2.289472] systemd[1]: Reached target Remote File Systems.
[ 2.289574] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.306775] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[ 2.371549] systemd-journald[212]: Received request to flush runtime journal from PID 1
[ 2.373492] clocksource: Switched to clocksource tsc
[ 2.394240] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 2.394373] ACPI: Lid Switch [LID]
[ 2.394426] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 2.394439] ACPI: Sleep Button [SLPB]
[ 2.394494] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.394506] ACPI: Power Button [PWRF]
[ 2.428201] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.430518] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 2.441087] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 2.441704] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.441705] ACPI: Thermal Zone [THM0] (56 C)
[ 2.443545] ACPI: Battery Slot [BAT0] (battery present)
[ 2.443815] ACPI: AC Adapter [AC] (on-line)
[ 2.446663] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[ 2.453587] pps_core: LinuxPPS API ver. 1 registered
[ 2.453589] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.467415] media: Linux media interface: v0.10
[ 2.470233] PTP clock support registered
[ 2.483111] Linux agpgart interface v0.103
[ 2.485395] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20170728/utaddress-247)
[ 2.485402] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.485405] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170728/utaddress-247)
[ 2.485409] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.485410] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170728/utaddress-247)
[ 2.485413] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.485414] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170728/utaddress-247)
[ 2.485418] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.485418] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.495741] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.496992] Non-volatile memory driver v1.3
[ 2.505869] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 2.505871] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.505872] thinkpad_acpi: ThinkPad BIOS 83ET61WW (1.31 ), EC unknown
[ 2.505873] thinkpad_acpi: Lenovo ThinkPad T420, model 4180BJ1
[ 2.511062] Linux video capture interface: v2.00
[ 2.516703] thinkpad_acpi: radio switch found; radios are enabled
[ 2.516811] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 2.516812] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 2.522101] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 2.522102] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.522268] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.527463] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 2.530105] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 2.534615] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 2.574568] Bluetooth: Core ver 2.22
[ 2.574583] NET: Registered protocol family 31
[ 2.574584] Bluetooth: HCI device and connection manager initialized
[ 2.574587] Bluetooth: HCI socket layer initialized
[ 2.574589] Bluetooth: L2CAP socket layer initialized
[ 2.574593] Bluetooth: SCO socket layer initialized
[ 2.574614] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 2.580358] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b221)
[ 2.582518] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 2.582521] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 2.582522] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 2.582591] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input7
[ 2.582651] usbcore: registered new interface driver uvcvideo
[ 2.582652] USB Video Class driver (1.1.1)
[ 2.598436] usbcore: registered new interface driver btusb
[ 2.599588] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 2.599589] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 2.599590] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 2.599590] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 2.602908] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[ 2.616083] AVX version of gcm_enc/dec engaged.
[ 2.616084] AES CTR mode by8 optimization enabled
[ 2.623457] Intel(R) Wireless WiFi driver for Linux
[ 2.623458] Copyright(c) 2003- 2015 Intel Corporation
[ 2.623661] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.626124] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 2.650047] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 2.696433] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 2.696436] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 2.696437] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 2.696439] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 2.731148] iTCO_vendor_support: vendor-support=0
[ 2.732084] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.732127] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.732199] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.738343] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.784692] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:68:b2:6b
[ 2.784701] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.784732] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 2.789141] intel_rapl: Found RAPL domain package
[ 2.789143] intel_rapl: Found RAPL domain core
[ 2.789144] intel_rapl: Found RAPL domain uncore
[ 2.789149] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 2.794435] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 2.834051] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 2.873878] [drm] Memory usable by graphics device = 2048M
[ 2.873882] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 2.873883] fb: switching to inteldrmfb from VESA VGA
[ 2.873918] Console: switching to colour dummy device 80x25
[ 2.874009] [drm] Replacing VGA console driver
[ 2.879740] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.879742] [drm] Driver supports precise vblank timestamp query.
[ 2.880097] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.896144] nvidia: loading out-of-tree module taints kernel.
[ 2.896151] nvidia: module license 'NVIDIA' taints kernel.
[ 2.896152] Disabling lock debugging due to kernel taint
[ 2.907198] nvidia-nvlink: Nvlink Core is being initialized, major device number 240
[ 2.907425] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
[ 2.907481] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[ 2.907567] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 387.34 Tue Nov 21 03:09:00 PST 2017 (using threaded interrupts)
[ 2.915223] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[ 2.915503] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 2.916126] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 387.34 Tue Nov 21 02:09:45 PST 2017
[ 2.916500] acpi device:00: registered as cooling_device5
[ 2.916564] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 2.916744] ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no)
[ 2.917784] acpi device:0a: registered as cooling_device6
[ 2.917852] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input10
[ 2.917982] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.919169] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 2.919171] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[ 2.931393] fbcon: inteldrmfb (fb0) is primary device
[ 2.935582] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[ 2.936043] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 2.936044] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.936045] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[ 2.936046] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 2.936046] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 2.936047] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23
[ 2.936048] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b
[ 2.936049] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a
[ 2.937381] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 2.943790] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 2.943944] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 2.944000] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 2.944054] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 2.944104] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 3.423915] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[ 3.503235] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367
[ 3.503249] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 3.554067] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 3.557726] mousedev: PS/2 mouse device common for all mice
[ 3.740655] Console: switching to colour frame buffer device 200x56
[ 3.764806] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.298217] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 4.550223] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input16
[ 93.127212] random: crng init done
[ 108.753056] rfkill: input handler disabled
[ 140.272879] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 140.563970] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 140.650083] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 144.992875] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 145.285074] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 145.368517] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 148.606459] wlp3s0: authenticate with f4:f2:6d:a2:2b:44
[ 148.612336] wlp3s0: send auth to f4:f2:6d:a2:2b:44 (try 1/3)
[ 148.614689] wlp3s0: authenticated
[ 148.616678] wlp3s0: associate with f4:f2:6d:a2:2b:44 (try 1/3)
[ 148.623467] wlp3s0: RX AssocResp from f4:f2:6d:a2:2b:44 (capab=0x431 status=0 aid=1)
[ 148.658711] wlp3s0: associated
[ 148.658849] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 1081.089491] PM: suspend entry (deep)
[ 1081.089494] PM: Syncing filesystems ... done.
[ 1081.773825] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 1081.775664] OOM killer disabled.
[ 1081.775664] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[ 1081.776553] Suspending console(s) (use no_console_suspend to debug)
[ 1081.937003] wlp3s0: deauthenticating from f4:f2:6d:a2:2b:44 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1081.937288] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1081.937355] sd 0:0:0:0: [sda] Stopping disk
[ 1082.170454] e1000e: EEE TX LPI TIMER: 00000011
[ 1082.483533] ACPI: Preparing to enter system sleep state S3
[ 1082.783182] ACPI: EC: event blocked
[ 1082.783183] ACPI: EC: EC stopped
[ 1082.783184] PM: Saving platform NVS memory
[ 1082.784250] Disabling non-boot CPUs ...
[ 1082.811856] smpboot: CPU 1 is now offline
[ 1082.841442] smpboot: CPU 2 is now offline
[ 1082.871359] smpboot: CPU 3 is now offline
[ 1082.873177] ACPI: Low-level resume complete
[ 1082.873221] ACPI: EC: EC started
[ 1082.873221] PM: Restoring platform NVS memory
[ 1082.873714] Enabling non-boot CPUs ...
[ 1082.873753] x86: Booting SMP configuration:
[ 1082.873753] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 1082.874022] Disabled fast string operations
[ 1082.985200] cache: parent cpu1 should not be sleeping
[ 1082.985497] CPU1 is up
[ 1082.985557] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 1082.986267] Disabled fast string operations
[ 1083.098528] cache: parent cpu2 should not be sleeping
[ 1083.098859] CPU2 is up
[ 1083.098922] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 1083.099495] Disabled fast string operations
[ 1083.221862] cache: parent cpu3 should not be sleeping
[ 1083.222213] CPU3 is up
[ 1083.229915] ACPI: Waking up from system sleep state S3
[ 1083.781932] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 1083.806461] ACPI: EC: event unblocked
[ 1083.813031] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 1083.816527] sd 0:0:0:0: [sda] Starting disk
[ 1084.041777] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
[ 1084.105158] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 1084.158481] ata4: SATA link down (SStatus 0 SControl 300)
[ 1084.158532] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1084.158603] ata5: SATA link down (SStatus 0 SControl 300)
[ 1084.158636] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1084.158854] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1084.158859] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1084.163406] ata1.00: NCQ Send/Recv Log not supported
[ 1084.163697] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1084.163702] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1084.168232] ata1.00: NCQ Send/Recv Log not supported
[ 1084.168240] ata1.00: configured for UDMA/133
[ 1084.218458] usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
[ 1084.302334] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1084.303160] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1084.303165] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1084.317821] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1084.318216] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1084.318221] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1084.319910] ata2.00: configured for UDMA/100
[ 1084.388480] usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
[ 1084.547835] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[ 1084.682697] usb 1-1.4:1.0: rebind failed: -517
[ 1084.682704] usb 1-1.4:1.1: rebind failed: -517
[ 1084.683382] OOM killer enabled.
[ 1084.683385] Restarting tasks ...
[ 1084.683423] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: docking
[ 1084.688574] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: Unable to dock!
[ 1084.691193] done.
[ 1084.710216] rfkill: input handler enabled
[ 1084.717311] video LNXVIDEO:00: Restoring backlight state
[ 1084.717819] video LNXVIDEO:01: Restoring backlight state
[ 1084.718666] PM: suspend exit
[ 1084.727107] rfkill: input handler disabled
[ 1087.613339] wlp3s0: authenticate with f4:f2:6d:a2:2b:44
[ 1087.618112] wlp3s0: send auth to f4:f2:6d:a2:2b:44 (try 1/3)
[ 1087.620422] wlp3s0: authenticated
[ 1087.621757] wlp3s0: associate with f4:f2:6d:a2:2b:44 (try 1/3)
[ 1087.626486] wlp3s0: RX AssocResp from f4:f2:6d:a2:2b:44 (capab=0x431 status=0 aid=1)
[ 1087.661380] wlp3s0: associated
[ 3575.289263] PM: suspend entry (deep)
[ 3575.289266] PM: Syncing filesystems ... done.
[ 3575.374728] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 3575.376928] OOM killer disabled.
[ 3575.376929] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 3575.378226] Suspending console(s) (use no_console_suspend to debug)
[ 3575.542043] wlp3s0: deauthenticating from f4:f2:6d:a2:2b:44 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3575.542651] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 3575.542759] sd 0:0:0:0: [sda] Stopping disk
[ 3575.771817] e1000e: EEE TX LPI TIMER: 00000011
[ 3576.085397] ACPI: Preparing to enter system sleep state S3
[ 3576.384682] ACPI: EC: event blocked
[ 3576.384684] ACPI: EC: EC stopped
[ 3576.384685] PM: Saving platform NVS memory
[ 3576.386145] Disabling non-boot CPUs ...
[ 3576.412968] smpboot: CPU 1 is now offline
[ 3576.436251] smpboot: CPU 2 is now offline
[ 3576.462831] smpboot: CPU 3 is now offline
[ 3576.465865] ACPI: Low-level resume complete
[ 3576.465959] ACPI: EC: EC started
[ 3576.465960] PM: Restoring platform NVS memory
[ 3576.466813] Enabling non-boot CPUs ...
[ 3576.466901] x86: Booting SMP configuration:
[ 3576.466904] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 3576.467698] Disabled fast string operations
[ 3576.524844] cache: parent cpu1 should not be sleeping
[ 3576.525230] CPU1 is up
[ 3576.525289] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 3576.526035] Disabled fast string operations
[ 3576.581511] cache: parent cpu2 should not be sleeping
[ 3576.581937] CPU2 is up
[ 3576.581994] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 3576.582735] Disabled fast string operations
[ 3576.641506] cache: parent cpu3 should not be sleeping
[ 3576.641948] CPU3 is up
[ 3576.650367] ACPI: Waking up from system sleep state S3
[ 3576.955078] thinkpad_acpi: EC reports that Thermal Table has changed
[ 3577.221638] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 3577.246111] ACPI: EC: event unblocked
[ 3577.253053] sd 0:0:0:0: [sda] Starting disk
[ 3577.258025] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 3577.481482] usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
[ 3577.548020] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 3577.588211] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3577.588244] ata4: SATA link down (SStatus 0 SControl 300)
[ 3577.588282] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3577.588314] ata5: SATA link down (SStatus 0 SControl 300)
[ 3577.588553] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 3577.588558] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 3577.593231] ata1.00: NCQ Send/Recv Log not supported
[ 3577.593664] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 3577.593669] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 3577.598295] ata1.00: NCQ Send/Recv Log not supported
[ 3577.598307] ata1.00: configured for UDMA/133
[ 3577.645030] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 3577.645903] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 3577.645908] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 3577.651432] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
[ 3577.661183] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 3577.662156] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 3577.662161] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 3577.663832] ata2.00: configured for UDMA/100
[ 3577.824765] usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
[ 3577.999769] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[ 3578.140053] usb 1-1.4:1.0: rebind failed: -517
[ 3578.140059] usb 1-1.4:1.1: rebind failed: -517
[ 3578.140669] OOM killer enabled.
[ 3578.140673] Restarting tasks ... done.
[ 3578.181885] rfkill: input handler enabled
[ 3578.204415] video LNXVIDEO:00: Restoring backlight state
[ 3578.204867] video LNXVIDEO:01: Restoring backlight state
[ 3578.210016] PM: suspend exit
[ 3578.212995] rfkill: input handler disabled
[ 3602.198091] PM: suspend entry (deep)
[ 3602.198094] PM: Syncing filesystems ... done.
[ 3602.309575] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 3602.311332] OOM killer disabled.
[ 3602.311333] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 3602.312654] Suspending console(s) (use no_console_suspend to debug)
[ 3602.485287] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 3602.485569] sd 0:0:0:0: [sda] Stopping disk
[ 3602.714736] e1000e: EEE TX LPI TIMER: 00000011
[ 3602.781329] queueing ieee80211 work while going to suspend
[ 3603.025441] ACPI: Preparing to enter system sleep state S3
[ 3603.311428] ACPI: EC: event blocked
[ 3603.311430] ACPI: EC: EC stopped
[ 3603.311431] PM: Saving platform NVS memory
[ 3603.312857] Disabling non-boot CPUs ...
[ 3603.340430] smpboot: CPU 1 is now offline
[ 3603.376339] smpboot: CPU 2 is now offline
[ 3603.392904] smpboot: CPU 3 is now offline
[ 3603.395860] ACPI: Low-level resume complete
[ 3603.395954] ACPI: EC: EC started
[ 3603.395955] PM: Restoring platform NVS memory
[ 3603.396799] Enabling non-boot CPUs ...
[ 3603.396887] x86: Booting SMP configuration:
[ 3603.396889] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 3603.397682] Disabled fast string operations
[ 3603.454909] cache: parent cpu1 should not be sleeping
[ 3603.455293] CPU1 is up
[ 3603.455354] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 3603.456100] Disabled fast string operations
[ 3603.511570] cache: parent cpu2 should not be sleeping
[ 3603.511997] CPU2 is up
[ 3603.512056] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 3603.512798] Disabled fast string operations
[ 3603.568234] cache: parent cpu3 should not be sleeping
[ 3603.568680] CPU3 is up
[ 3603.576881] ACPI: Waking up from system sleep state S3
[ 3604.109182] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 3604.136416] ACPI: button: The lid device is not compliant to SW_LID.
[ 3604.136437] ACPI: EC: event unblocked
[ 3604.145271] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 3604.146455] sd 0:0:0:0: [sda] Starting disk
[ 3604.371503] usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
[ 3604.434895] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 3604.488214] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3604.488249] ata5: SATA link down (SStatus 0 SControl 300)
[ 3604.488291] ata4: SATA link down (SStatus 0 SControl 300)
[ 3604.488358] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3604.488701] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 3604.488707] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 3604.493320] ata1.00: NCQ Send/Recv Log not supported
[ 3604.493691] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 3604.493696] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 3604.498229] ata1.00: NCQ Send/Recv Log not supported
[ 3604.498237] ata1.00: configured for UDMA/133
[ 3604.541471] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
[ 3604.578573] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 3604.579392] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 3604.579398] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 3604.594631] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 3604.595601] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 3604.595605] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 3604.597277] ata2.00: configured for UDMA/100
[ 3604.888580] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[ 3605.027330] usb 1-1.4:1.0: rebind failed: -517
[ 3605.027337] usb 1-1.4:1.1: rebind failed: -517
[ 3605.028008] OOM killer enabled.
[ 3605.028011] Restarting tasks ... done.
[ 3605.043728] rfkill: input handler enabled
[ 3605.057164] video LNXVIDEO:00: Restoring backlight state
[ 3605.057631] video LNXVIDEO:01: Restoring backlight state
[ 3605.058201] PM: suspend exit
[ 3605.066132] rfkill: input handler disabled
[ 3668.717089] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 3669.008001] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 3669.090309] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 3672.317219] wlp3s0: authenticate with 02:18:1a:31:2b:e6
[ 3672.320084] wlp3s0: send auth to 02:18:1a:31:2b:e6 (try 1/3)
[ 3672.566287] wlp3s0: authenticated
[ 3672.568095] wlp3s0: associate with 02:18:1a:31:2b:e6 (try 1/3)
[ 3672.569181] wlp3s0: RX AssocResp from 02:18:1a:31:2b:e6 (capab=0x1411 status=0 aid=1)
[ 3672.587096] wlp3s0: associated
[ 3672.587141] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 3673.073453] wlp3s0: Limiting TX power to 17 (17 - 0) dBm as advertised by 02:18:1a:31:2b:e6Last edited by Astrades (2017-12-21 17:33:18)
Offline
#6 2017-12-21 17:41:49
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 25,435
Re: i3wm Black Screen: Graphics Driver Issues
There are loads of references to nvidia, yet you said you are using the OS drivers... In general according to this output you are currently operating in Optimus/dual graphics mode, see if you can either switch that to exclusive in your BIOS or follow https://wiki.archlinux.org/index.php/Bumblebee for instructions on how to setup a hybrid system.
Offline
Pages: 1