You are not logged in.
Pages: 1
Hi,
I got a lenovo B570. When creating a hotspot with my android phone I'm able to connect the the wifi but I can not access any sites or ping any IPs.
The hotspot itself works, I checked with other devices (Dell laptop also running arch, android phones). Also my local wifi works with the B570.
I don't really know where to start, google got me only unanswered forum posts.
uname -r
4.14.6-1-ARCHip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 1000
link/ether f0:... brd ff:ff:ff:ff:ff:ff
3: wlp2s0b1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000
link/ether 60:... brd ff:ff:ff:ff:ff:ffping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
From 192.168.43.169 icmp_seq=1 Destination Host Unreachable
From 192.168.43.169 icmp_seq=2 Destination Host Unreachable
From 192.168.43.169 icmp_seq=3 Destination Host Unreachable
From 192.168.43.169 icmp_seq=4 Destination Host Unreachable
From 192.168.43.169 icmp_seq=5 Destination Host Unreachable
From 192.168.43.169 icmp_seq=6 Destination Host Unreachable
^C
--- 8.8.8.8 ping statistics ---
8 packets transmitted, 0 received, +6 errors, 100% packet loss, time 7098ms
pipe 4ping google.com
ping: google.com: Der Name oder der Dienst ist nicht bekanntOffline
How are you managing your wifi connections?
Are you configured for static or dynamic addresses?
A 192.168.43.xx/24 address seems wrong. What are the output of:
ip addr
ip route
and
iw dev wlp2s0b1 station dump
???
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way
Offline
How are you managing your wifi connections?
Are you configured for static or dynamic addresses?A 192.168.43.xx/24 address seems wrong. What are the output of:
ip addr
ip route
and
iw dev wlp2s0b1 station dump
???
NetworkManager
dynamic addresses
ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000
link/ether f0:... brd ff:ff:ff:ff:ff:ff
3: wlp2s0b1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 60:... brd ff:ff:ff:ff:ff:ff
inet 192.168.43.169/24 brd 192.168.43.255 scope global dynamic noprefixroute wlp2s0b1
valid_lft 3592sec preferred_lft 3592sec
inet6 fe80::8158:bc23:e855:c8c6/64 scope link noprefixroute
valid_lft forever preferred_lft foreverip route
default via 192.168.43.1 dev wlp2s0b1 proto dhcp metric 600
192.168.43.0/24 dev wlp2s0b1 proto kernel scope link src 192.168.43.169 metric 600iw dev wlp2s0b1 station dump
Station 00:... (on wlp2s0b1)
inactive time: 6746 ms
rx bytes: 58764
rx packets: 597
tx bytes: 4007
tx packets: 39
tx retries: 0
tx failed: 0
beacon loss: 0
beacon rx: 281
rx drop misc: 14
signal: -29 dBm
signal avg: -31 dBm
beacon signal avg: 225 dBm
tx bitrate: 65.0 MBit/s MCS 6 short GI
rx bitrate: 12.0 MBit/s
expected throughput: 31.218Mbps
authorized: yes
authenticated: yes
associated: yes
preamble: long
WMM/WME: yes
MFP: no
TDLS peer: no
DTIM period: 2
beacon interval:100
short preamble: yes
short slot time:yes
connected time: 28 secondsThe gateway ip seems to be okay, same on the dell as I remember.
Last edited by Burner (2017-12-26 21:40:36)
Offline
More information needed? Any ideas?
Offline
No, it all looks rational to me. How about the phone? Can you ping its IP?
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way
Offline
No, it all looks rational to me. How about the phone? Can you ping its IP?
tried the following on the phone
ping google.com
PING google.com (172.217.19.78) 56(84) bytes of data.
64 bytes from ham02s17-in-f14.1e100.net (172.217.19.78): icmp_seq=1 ttl=54 time=139 ms
64 bytes from ham02s17-in-f14.1e100.net (172.217.19.78): icmp_seq=2 ttl=54 time=129 msip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
link/ether 76:... brd ff:ff:ff:ff:ff:ff
inet6 fe80::74ab:d3ff:fe24:317b/64 scope link
valid_lft forever preferred_lft forever
3: sit0: <NOARP> mtu 1480 qdisc noop state DOWN group default
link/sit 0.0.0.0 brd 0.0.0.0
4: rmnet0: <UP,LOWER_UP> mtu 2000 qdisc pfifo_fast state UNKNOWN group default qlen 1000
link/[530]
12: rmnet_data0: <UP,LOWER_UP> mtu 1500 qdisc htb state UNKNOWN group default qlen 1000
link/[530]
inet 10.49.132.214/30 scope global rmnet_data0
valid_lft forever preferred_lft forever
inet6 fe80::2d90:a0fa:2c48:bf82/64 scope link
valid_lft forever preferred_lft forever
13: rmnet_data1: <> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/[530]
14: rmnet_data2: <> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/[530]
15: rmnet_data3: <> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/[530]
16: rmnet_data4: <> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/[530]
17: rmnet_data5: <> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/[530]
18: rmnet_data6: <> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/[530]
19: rmnet_data7: <> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/[530]
20: r_rmnet_data0: <> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/[530]
21: r_rmnet_data1: <> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/[530]
22: r_rmnet_data2: <> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/[530]
23: r_rmnet_data3: <> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/[530]
24: r_rmnet_data4: <> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/[530]
25: r_rmnet_data5: <> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/[530]
26: r_rmnet_data6: <> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/[530]
27: r_rmnet_data7: <> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/[530]
28: r_rmnet_data8: <> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/[530]
84: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:... brd ff:ff:ff:ff:ff:ff
inet 192.168.43.1/24 brd 192.168.43.255 scope global wlan0
valid_lft forever preferred_lft forever
inet6 fe80::20a:f5ff:fefe:af38/64 scope link
valid_lft forever preferred_lft foreverip route
10.49.132.212/30 dev rmnet_data0 proto kernel scope link src 10.49.132.214
192.168.43.0/24 dev wlan0 proto kernel scope link src 192.168.43.1pinging the phone results in this
ping 192.168.43.1
PING 192.168.43.1 (192.168.43.1) 56(84) bytes of data.
^C
--- 192.168.43.1 ping statistics ---
10 packets transmitted, 0 received, 100% packet loss, time 9115msLast edited by Burner (2017-12-27 19:11:26)
Offline
Just tried pinging the laptop from the phone
ping 192.168.43.169
PING 192.168.43.169 (192.168.43.169) 56(84) bytes of data.
^C
--- 192.168.43.169 ping statistics ---
21 packets transmitted, 0 received, 100% packet loss, time 20007msOffline
Anyone got an idea what else I could try?
bumping allowed?
Last edited by Burner (2018-01-09 17:48:06)
Offline
bump
Offline
*edit - wanted to take my foot out of my mouth long enough to completely retract this statement, as this is indeed a private ip (time for me to dust off the ole ccna textbook, apparently, why was i thinking 192.168 was class c).
To add to the fun, my android native hotspot also provides a "192.168.43" address. Looking into the android source code the range and gateway ip's seem to be hardcoded. Unless rooted this part can't be configured incorrectly.
Maybe there is indeed something amiss with the config on the laptop? Firewall, conflicting network management daemons, a manually added route?
==========================================
RETRACTED STATEMENT:
I agree with ewaller's initial comment - an ip address of "192.168.43.xx/24" is odd for the scenario you're describing in the OP - it's a subnet for public ip addresses.
Any additional info on the hotspot? Things like phone model, android version, hotspot software (built in adroid hotspot or is it a 3rd party hotspot app?).
In general (or as a 100% rule?) hotspots do not give out public ip's to their clients, this will cause issues when communicating to the internet at large. It would be like trying to purchase alcohol using a fake id that looks nothing like you - denied all day long =P
May want to turn your focus to the hotspot software being used, seems it's not setup properly (didn't know this was even possible with consumer hotspots).
Last edited by blufinney (2018-01-10 20:59:51)
Offline
`ip addr` from my laptop, connected with an android hotspot:
3: wlo1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 70:77:81:32:34:bf brd ff:ff:ff:ff:ff:ff
inet 192.168.43.142/24 brd 192.168.43.255 scope global wlo1
valid_lft forever preferred_lft forever
inet6 fe80::7277:81ff:fe32:34bf/64 scope link
valid_lft forever preferred_lft foreverFor the sake of information, this is normal.
bump
If you can't ping your gateway after it has provided you an ip address there's something wrong happening with the route: use traceroute and eventually get acquainted with wireshark to understand what's happening.
I think wpa_supplicant may give some hints with the debug option set.
Offline
Pages: 1