shut down computer won't turn off power automatically.

branchus · 2018-02-24 22:38:44

Hi

in recent couple of days, when I choose "Power Off" or “ shutdown” command at the end of the day. the monitor goes into sleep. Systemd,my then stops there. power won't automatically turn off, the fan still running, the led on keyboard and mouse are still on.

I waited couple of update for the kernels, systemd and nvidia display drivers, but seems none of them fixed the issue. the hardware has never changed. No recent change in BIOS. Windows has no issue to turn itself off. I tried both lts and current kernel. both have the same issue.

below is the dmesg

[    0.000000] microcode: microcode updated early to revision 0x3b, date = 2017-11-17
[    0.000000] Linux version 4.14.21-1-lts (builduser@andyrtr) (gcc version 7.3.0 (GCC)) #1 SMP Fri Feb 23 17:41:10 CET 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=4e14e22a-4aa6-42a3-bb41-1f17f94cf293 rw quiet
[    0.000000] Intel Spectre v2 broken microcode detected; disabling Speculation Control
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000079825fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079826000-0x000000007b2adfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007b2ae000-0x000000007b2fbfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007b2fc000-0x000000007c106fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007c107000-0x000000007c5a2fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c5a3000-0x000000007c60bfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007c60c000-0x000000007c60cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007c60d000-0x000000007c692fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c693000-0x000000007c8b7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007c8b8000-0x000000007cff8fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007cff9000-0x000000007cffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007d000000-0x000000007dffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi:  ESRT=0x7c59e618  ACPI=0x7b2bd000  ACPI 2.0=0x7b2bd000  SMBIOS=0x7c4abb18 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: LENOVO 30A7CTO1WW/102F, BIOS A4KT97AUS 10/23/2017
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x880000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000080000000 mask 3FFF80000000 uncachable
[    0.000000]   1 base 380000000000 mask 3FC000000000 uncachable
[    0.000000]   2 base 00007E000000 mask 3FFFFE000000 uncachable
[    0.000000]   3 base 0000E0000000 mask 3FFFF0000000 write-through
[    0.000000]   4 base 0000F0000000 mask 3FFFFE000000 write-through
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x7d000 max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x000000007c59e618 to 0x000000007c59e678.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff965e00099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x11d636000, 0x11d636fff] PGTABLE
[    0.000000] BRK [0x11d637000, 0x11d637fff] PGTABLE
[    0.000000] BRK [0x11d638000, 0x11d638fff] PGTABLE
[    0.000000] BRK [0x11d639000, 0x11d639fff] PGTABLE
[    0.000000] BRK [0x11d63a000, 0x11d63afff] PGTABLE
[    0.000000] BRK [0x11d63b000, 0x11d63bfff] PGTABLE
[    0.000000] BRK [0x11d63c000, 0x11d63cfff] PGTABLE
[    0.000000] BRK [0x11d63d000, 0x11d63dfff] PGTABLE
[    0.000000] BRK [0x11d63e000, 0x11d63efff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x36ef7000-0x37772fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007B2BD000 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000007B2BD0A8 0000D4 (v01 LENOVO TC-A4    00001650 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007B2EC7A0 00010C (v05 LENOVO TC-A4    00001650 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007B2BD210 02F58B (v02 LENOVO TC-A4    00001650 INTL 20091013)
[    0.000000] ACPI: FACS 0x000000007C105F80 000040
[    0.000000] ACPI: APIC 0x000000007B2EC8B0 000138 (v03 LENOVO TC-A4    00001650 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000007B2EC9E8 000044 (v01 LENOVO TC-A4    00001650 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000007B2ECA30 00009C (v01 LENOVO TC-A4    00001650 AMI  00010013)
[    0.000000] ACPI: TCPA 0x000000007B2ECAD0 000032 (v02 LENOVO TC-A4    00001650 MSFT 01000013)
[    0.000000] ACPI: MCFG 0x000000007B2ECB08 00003C (v01 LENOVO TC-A4    00001650 MSFT 00000097)
[    0.000000] ACPI: UEFI 0x000000007B2ECB48 000042 (v01 LENOVO TC-A4    00001650      00000000)
[    0.000000] ACPI: BDAT 0x000000007B2ECB90 000030 (v01 LENOVO TC-A4    00001650 INTL 20091013)
[    0.000000] ACPI: HPET 0x000000007B2ECBC0 000038 (v01 LENOVO TC-A4    00001650 INTL 20091013)
[    0.000000] ACPI: MSCT 0x000000007B2ECBF8 000090 (v01 LENOVO TC-A4    00001650 INTL 20091013)
[    0.000000] ACPI: PMCT 0x000000007B2ECC88 000064 (v01 LENOVO TC-A4    00001650 INTL 20091013)
[    0.000000] ACPI: SLIT 0x000000007B2ECCF0 00002D (v01 LENOVO TC-A4    00001650 INTL 20091013)
[    0.000000] ACPI: SRAT 0x000000007B2ECD20 000E58 (v03 LENOVO TC-A4    00001650 INTL 20091013)
[    0.000000] ACPI: WDDT 0x000000007B2EDB78 000040 (v01 LENOVO TC-A4    00001650 INTL 20091013)
[    0.000000] ACPI: SSDT 0x000000007B2EDBB8 00D58F (v01 LENOVO TC-A4    00001650 INTL 20120913)
[    0.000000] ACPI: BGRT 0x000000007B2FB148 000038 (v01 LENOVO TC-A4    00001650 AMI  00010013)
[    0.000000] ACPI: DMAR 0x000000007B2FB180 0000DC (v01 LENOVO TC-A4    00001650 INTL 20091013)
[    0.000000] ACPI: HEST 0x000000007B2FB260 0000A8 (v01 LENOVO TC-A4    00001650 INTL 00000001)
[    0.000000] ACPI: BERT 0x000000007B2FB308 000030 (v01 LENOVO TC-A4    00001650 INTL 00000001)
[    0.000000] ACPI: ERST 0x000000007B2FB338 000230 (v01 LENOVO TC-A4    00001650 INTL 00000001)
[    0.000000] ACPI: EINJ 0x000000007B2FB568 000150 (v01 LENOVO TC-A4    00001650 INTL 00000001)
[    0.000000] ACPI: ASF! 0x000000007B2FB6B8 0000A0 (v32 LENOVO TC-A4    00001650 TFSM 000F4240)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x06 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x08 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x0a -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x0c -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x0e -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x07 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x09 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x0b -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x0d -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x0f -> Node 0
[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x87fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=1
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x87fffffff] -> [mem 0x00000000-0x87fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x87fffb000-0x87fffefff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000087fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000003efff]
[    0.000000]   node   0: [mem 0x0000000000040000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000079825fff]
[    0.000000]   node   0: [mem 0x000000007c60c000-0x000000007c60cfff]
[    0.000000]   node   0: [mem 0x000000007c693000-0x000000007c8b7fff]
[    0.000000]   node   0: [mem 0x000000007cff9000-0x000000007cffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000087fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff]
[    0.000000] On node 0 totalpages: 8362481
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 23 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7722 pages used for memmap
[    0.000000]   DMA32 zone: 494163 pages, LIFO batch:31
[    0.000000]   Normal zone: 122880 pages used for memmap
[    0.000000]   Normal zone: 7864320 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x79826000-0x7b2adfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b2ae000-0x7b2fbfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7b2fc000-0x7c106fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c107000-0x7c5a2fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c5a3000-0x7c60bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c60d000-0x7c692fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c8b8000-0x7cff8fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7d000000-0x7dffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7e000000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] percpu: Embedded 42 pages/cpu @ffff96665f200000 s132376 r8192 d31464 u262144
[    0.000000] pcpu-alloc: s132376 r8192 d31464 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 8231792
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=4e14e22a-4aa6-42a3-bb41-1f17f94cf293 rw quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 32711128K/33449924K available (10252K kernel code, 1150K rwdata, 2788K rodata, 1416K init, 992K bss, 738796K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 29090 entries in 114 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=16.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] NR_IRQS: 8448, nr_irqs: 960, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.010000] tsc: Detected 2394.386 MHz processor
[    0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.77 BogoMIPS (lpj=23943860)
[    0.010000] pid_max: default: 32768 minimum: 301
[    0.010000] ACPI: Core revision 20170728
[    0.039682] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.040033] Security Framework initialized
[    0.040034] Yama: becoming mindful.
[    0.044919] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[    0.047354] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.047437] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.047514] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.047710] CPU: Physical Processor ID: 0
[    0.047711] CPU: Processor Core ID: 0
[    0.047720] mce: CPU supports 22 MCE banks
[    0.047736] CPU0: Thermal monitoring enabled (TM1)
[    0.047784] process: using mwait in idle threads
[    0.047786] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.047786] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.047788] Spectre V2 : Mitigation: Full generic retpoline
[    0.048235] Freeing SMP alternatives memory: 24K
[    0.052045] smpboot: Max logical packages: 2
[    0.052049] DMAR: Host address width 46
[    0.052051] DMAR: DRHD base: 0x000000fbffd000 flags: 0x0
[    0.052059] DMAR: dmar0: reg_base_addr fbffd000 ver 1:0 cap d2008c10ef0466 ecap f0205a
[    0.052060] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
[    0.052063] DMAR: dmar1: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de
[    0.052064] DMAR: RMRR base: 0x0000007c4bc000 end: 0x0000007c4cbfff
[    0.052065] DMAR: ATSR flags: 0x0
[    0.052066] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
[    0.052069] DMAR-IR: IOAPIC id 1 under DRHD base  0xfbffc000 IOMMU 1
[    0.052070] DMAR-IR: IOAPIC id 2 under DRHD base  0xfbffc000 IOMMU 1
[    0.052070] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
[    0.052071] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.052072] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.052451] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.052451] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.052455] Switched APIC routing to physical flat.
[    0.052978] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.153000] TSC deadline timer enabled
[    0.153003] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz (family: 0x6, model: 0x3f, stepping: 0x2)
[    0.153057] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.153097] ... version:                3
[    0.153098] ... bit width:              48
[    0.153098] ... generic registers:      4
[    0.153099] ... value mask:             0000ffffffffffff
[    0.153100] ... max period:             00007fffffffffff
[    0.153100] ... fixed-purpose events:   3
[    0.153101] ... event mask:             000000070000000f
[    0.153133] Hierarchical SRCU implementation.
[    0.154592] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.154604] smp: Bringing up secondary CPUs ...
[    0.154662] x86: Booting SMP configuration:
[    0.154664] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
[    0.192821] smp: Brought up 1 node, 16 CPUs
[    0.192821] smpboot: Total of 16 processors activated (76620.35 BogoMIPS)
[    0.200884] devtmpfs: initialized
[    0.200884] x86/mm: Memory block size: 128MB
[    0.202019] PM: Registering ACPI NVS region [mem 0x7b2fc000-0x7c106fff] (14725120 bytes)
[    0.202019] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.202019] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    0.202019] pinctrl core: initialized pinctrl subsystem
[    0.202019] RTC time:  9:21:59, date: 02/25/18
[    0.202019] NET: Registered protocol family 16
[    0.202019] cpuidle: using governor ladder
[    0.202019] cpuidle: using governor menu
[    0.202019] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.202019] ACPI: bus type PCI registered
[    0.202019] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.202019] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
[    0.202019] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
[    0.202019] PCI: Using configuration type 1 for base access
[    0.202019] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.202019] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.202019] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.202019] ACPI: Added _OSI(Module Device)
[    0.202019] ACPI: Added _OSI(Processor Device)
[    0.202019] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.202019] ACPI: Added _OSI(Processor Aggregator Device)
[    0.217639] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.223601] ACPI: Interpreter enabled
[    0.223601] ACPI: (supports S0 S3 S4 S5)
[    0.223601] ACPI: Using IOAPIC for interrupt routing
[    0.223601] HEST: Table parsing has been initialized.
[    0.223601] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.223601] ACPI: Enabled 6 GPEs in block 00 to 3F
[    0.223601] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
[    0.223601] acpi LNXIOBAY:01: ACPI dock station (docks/bays count: 2)
[    0.247263] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
[    0.247267] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    2.320074] acpi PNP0A03:03: _OSC: platform does not support [PCIeHotplug]
[    4.400070] acpi PNP0A03:03: _OSC: OS now controls [PME AER PCIeCapability]
[    4.400073] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
[    4.400150] PCI host bridge to bus 0000:ff
[    4.400154] pci_bus 0000:ff: root bus resource [bus ff]
[    4.400174] pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
[    4.400266] pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
[    4.400308] pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
[    4.400351] pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
[    4.400391] pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
[    4.400430] pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
[    4.400471] pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
[    4.400510] pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
[    4.400551] pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
[    4.400591] pci 0000:ff:0c.6: [8086:2fe6] type 00 class 0x088000
[    4.400629] pci 0000:ff:0c.7: [8086:2fe7] type 00 class 0x088000
[    4.400670] pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
[    4.400709] pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
[    4.400750] pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
[    4.400789] pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
[    4.400829] pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
[    4.400870] pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
[    4.400909] pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
[    4.400952] pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
[    4.400990] pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
[    4.401029] pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
[    4.401067] pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
[    4.401111] pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
[    4.401158] pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
[    4.401205] pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
[    4.401250] pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
[    4.401297] pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
[    4.401342] pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
[    4.401388] pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
[    4.401432] pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
[    4.401476] pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
[    4.401518] pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
[    4.401565] pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
[    4.401614] pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
[    4.401659] pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
[    4.401707] pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
[    4.401750] pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
[    4.401792] pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
[    4.401837] pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
[    4.401882] pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
[    4.401929] pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
[    4.401977] pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
[    4.402023] pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
[    4.402066] pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
[    4.402109] pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
[    4.402153] pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
[    4.402198] pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
[    4.402240] pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
[    4.402285] pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
[    4.402332] pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
[    4.402373] pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
[    4.402414] pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
[    4.402455] pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
[    4.402483] pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
[    4.402528] pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
[    4.402569] pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
[    4.403698] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    4.403702] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    4.403856] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
[    4.403996] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    4.403997] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    4.404549] PCI host bridge to bus 0000:00
[    4.404552] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    4.404553] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    4.404554] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    4.404555] pci_bus 0000:00: root bus resource [io  0x1000-0xffff window]
[    4.404557] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    4.404558] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window]
[    4.404560] pci_bus 0000:00: root bus resource [bus 00-fe]
[    4.404568] pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
[    4.404707] pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
[    4.404760] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    4.404880] pci 0000:00:01.1: [8086:2f03] type 01 class 0x060400
[    4.404933] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    4.405029] pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
[    4.405081] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    4.405191] pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
[    4.405243] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    4.405352] pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
[    4.405463] pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
[    4.405591] pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
[    4.405701] pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
[    4.405711] pci 0000:00:05.4: reg 0x10: [mem 0xfb337000-0xfb337fff]
[    4.405835] pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
[    4.406006] pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
[    4.406025] pci 0000:00:14.0: reg 0x10: [mem 0xfb320000-0xfb32ffff 64bit]
[    4.406077] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    4.406161] pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
[    4.406182] pci 0000:00:16.0: reg 0x10: [mem 0xfb336000-0xfb33600f 64bit]
[    4.406242] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    4.406327] pci 0000:00:16.2: [8086:8d3c] type 00 class 0x010185
[    4.406345] pci 0000:00:16.2: reg 0x10: [io  0xf070-0xf077]
[    4.406353] pci 0000:00:16.2: reg 0x14: [io  0xf060-0xf063]
[    4.406360] pci 0000:00:16.2: reg 0x18: [io  0xf050-0xf057]
[    4.406368] pci 0000:00:16.2: reg 0x1c: [io  0xf040-0xf043]
[    4.406375] pci 0000:00:16.2: reg 0x20: [io  0xf030-0xf03f]
[    4.406495] pci 0000:00:16.3: [8086:8d3d] type 00 class 0x070002
[    4.406512] pci 0000:00:16.3: reg 0x10: [io  0xf020-0xf027]
[    4.406520] pci 0000:00:16.3: reg 0x14: [mem 0xfb335000-0xfb335fff]
[    4.406663] pci 0000:00:19.0: [8086:15a0] type 00 class 0x020000
[    4.406681] pci 0000:00:19.0: reg 0x10: [mem 0xfb300000-0xfb31ffff]
[    4.406688] pci 0000:00:19.0: reg 0x14: [mem 0xfb334000-0xfb334fff]
[    4.406696] pci 0000:00:19.0: reg 0x18: [io  0xf000-0xf01f]
[    4.406751] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    4.406837] pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
[    4.406858] pci 0000:00:1a.0: reg 0x10: [mem 0xfb333000-0xfb3333ff]
[    4.406938] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    4.407025] pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
[    4.407094] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    4.407185] pci 0000:00:1c.1: [8086:8d12] type 01 class 0x060400
[    4.407253] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    4.407350] pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
[    4.407418] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    4.407515] pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
[    4.407536] pci 0000:00:1d.0: reg 0x10: [mem 0xfb332000-0xfb3323ff]
[    4.407617] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    4.407704] pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
[    4.407886] pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
[    4.407904] pci 0000:00:1f.3: reg 0x10: [mem 0xfb331000-0xfb3310ff 64bit]
[    4.407923] pci 0000:00:1f.3: reg 0x20: [io  0x0580-0x059f]
[    4.408023] pci 0000:00:1f.6: [8086:8d24] type 00 class 0x118000
[    4.408044] pci 0000:00:1f.6: reg 0x10: [mem 0xfb330000-0xfb330fff 64bit]
[    4.408339] pci 0000:00:01.0: PCI bridge to [bus 01]
[    4.408507] pci 0000:02:00.0: [144d:a804] type 00 class 0x010802
[    4.408525] pci 0000:02:00.0: reg 0x10: [mem 0xfb200000-0xfb203fff 64bit]
[    4.408658] pci 0000:00:01.1: PCI bridge to [bus 02]
[    4.408661] pci 0000:00:01.1:   bridge window [mem 0xfb200000-0xfb2fffff]
[    4.408828] pci 0000:03:00.0: [10de:13ba] type 00 class 0x030000
[    4.408841] pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[    4.408849] pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    4.408856] pci 0000:03:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    4.408862] pci 0000:03:00.0: reg 0x24: [io  0xe000-0xe07f]
[    4.408867] pci 0000:03:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
[    4.408872] pci 0000:03:00.0: enabling Extended Tags
[    4.408882] pci 0000:03:00.0: BAR 1: assigned to efifb
[    4.408963] pci 0000:03:00.1: [10de:0fbc] type 00 class 0x040300
[    4.408973] pci 0000:03:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
[    4.408994] pci 0000:03:00.1: enabling Extended Tags
[    4.409067] pci 0000:00:02.0: PCI bridge to [bus 03]
[    4.409070] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    4.409072] pci 0000:00:02.0:   bridge window [mem 0xfa000000-0xfb0fffff]
[    4.409075] pci 0000:00:02.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    4.409229] pci 0000:00:03.0: PCI bridge to [bus 04]
[    4.409275] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    4.409337] pci 0000:06:00.0: [1283:8893] type 01 class 0x060401
[    4.409468] pci 0000:06:00.0: supports D1 D2
[    4.409469] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.409512] pci 0000:00:1c.1: PCI bridge to [bus 06-07]
[    4.409641] pci 0000:06:00.0: PCI bridge to [bus 07] (subtractive decode)
[    4.409723] pci 0000:08:00.0: [144d:a800] type 00 class 0x010601
[    4.409796] pci 0000:08:00.0: reg 0x24: [mem 0xfb110000-0xfb111fff]
[    4.409806] pci 0000:08:00.0: reg 0x30: [mem 0xfb100000-0xfb10ffff pref]
[    4.409868] pci 0000:08:00.0: PME# supported from D3hot D3cold
[    4.409933] pci 0000:00:1c.4: PCI bridge to [bus 08]
[    4.409938] pci 0000:00:1c.4:   bridge window [mem 0xfb100000-0xfb1fffff]
[    4.409972] pci_bus 0000:00: on NUMA node 0
[    4.410649] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    4.410696] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    4.410741] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    4.410785] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    4.410830] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    4.410875] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    4.410919] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    4.410964] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    4.420022] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    4.420022] pci 0000:03:00.0: vgaarb: setting as boot device
[    4.420022] pci 0000:03:00.0: vgaarb: bridge control possible
[    4.420022] vgaarb: loaded
[    4.420096] EDAC MC: Ver: 3.0.0
[    4.420225] Registered efivars operations
[    4.440011] PCI: Using ACPI for IRQ routing
[    4.445933] PCI: pci_cache_line_size set to 64 bytes
[    4.446033] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
[    4.446034] e820: reserve RAM buffer [mem 0x79826000-0x7bffffff]
[    4.446035] e820: reserve RAM buffer [mem 0x7c60d000-0x7fffffff]
[    4.446036] e820: reserve RAM buffer [mem 0x7c8b8000-0x7fffffff]
[    4.446037] e820: reserve RAM buffer [mem 0x7d000000-0x7fffffff]
[    4.446114] NetLabel: Initializing
[    4.446115] NetLabel:  domain hash size = 128
[    4.446115] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    4.446129] NetLabel:  unlabeled traffic allowed by default
[    4.446155] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    4.446155] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    4.450040] clocksource: Switched to clocksource hpet
[    4.458679] VFS: Disk quotas dquot_6.6.0
[    4.458697] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    4.458746] pnp: PnP ACPI init
[    4.458929] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    4.459009] system 00:01: [io  0x0500-0x057f] has been reserved
[    4.459010] system 00:01: [io  0x0400-0x047f] has been reserved
[    4.459012] system 00:01: [io  0x0580-0x059f] has been reserved
[    4.459013] system 00:01: [io  0x0600-0x061f] has been reserved
[    4.459015] system 00:01: [io  0x0880-0x0883] has been reserved
[    4.459016] system 00:01: [io  0x0800-0x081f] has been reserved
[    4.459019] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
[    4.459020] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
[    4.459022] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[    4.459024] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[    4.459025] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
[    4.459027] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
[    4.459028] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
[    4.459032] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    4.459171] system 00:02: [io  0x0a00-0x0a0f] has been reserved
[    4.459173] system 00:02: [io  0x0a10-0x0a1f] has been reserved
[    4.459174] system 00:02: [io  0x0a20-0x0a2f] has been reserved
[    4.459178] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    4.459413] system 00:03: [io  0x0a20-0x0a2f] has been reserved
[    4.459416] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    4.459699] pnp 00:04: Plug and Play ACPI device, IDs PNP0c31 (active)
[    4.459802] pnp: PnP ACPI: found 5 devices
[    4.465740] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    4.465783] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
[    4.465785] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[    4.465787] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000
[    4.465818] pci 0000:00:1c.0: BAR 14: assigned [mem 0x90000000-0x901fffff]
[    4.465822] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref]
[    4.465824] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    4.465827] pci 0000:00:01.0: PCI bridge to [bus 01]
[    4.465833] pci 0000:00:01.1: PCI bridge to [bus 02]
[    4.465835] pci 0000:00:01.1:   bridge window [mem 0xfb200000-0xfb2fffff]
[    4.465840] pci 0000:00:02.0: PCI bridge to [bus 03]
[    4.465842] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    4.465844] pci 0000:00:02.0:   bridge window [mem 0xfa000000-0xfb0fffff]
[    4.465846] pci 0000:00:02.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    4.465850] pci 0000:00:03.0: PCI bridge to [bus 04]
[    4.465856] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    4.465858] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    4.465861] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x901fffff]
[    4.465864] pci 0000:00:1c.0:   bridge window [mem 0x90200000-0x903fffff 64bit pref]
[    4.465869] pci 0000:06:00.0: PCI bridge to [bus 07]
[    4.465888] pci 0000:00:1c.1: PCI bridge to [bus 06-07]
[    4.465897] pci 0000:00:1c.4: PCI bridge to [bus 08]
[    4.465901] pci 0000:00:1c.4:   bridge window [mem 0xfb100000-0xfb1fffff]
[    4.465907] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    4.465909] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    4.465910] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    4.465911] pci_bus 0000:00: resource 7 [io  0x1000-0xffff window]
[    4.465913] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    4.465914] pci_bus 0000:00: resource 9 [mem 0x90000000-0xfbffbfff window]
[    4.465916] pci_bus 0000:02: resource 1 [mem 0xfb200000-0xfb2fffff]
[    4.465917] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    4.465918] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfb0fffff]
[    4.465920] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    4.465921] pci_bus 0000:05: resource 0 [io  0x1000-0x1fff]
[    4.465922] pci_bus 0000:05: resource 1 [mem 0x90000000-0x901fffff]
[    4.465924] pci_bus 0000:05: resource 2 [mem 0x90200000-0x903fffff 64bit pref]
[    4.465925] pci_bus 0000:08: resource 1 [mem 0xfb100000-0xfb1fffff]
[    4.466060] NET: Registered protocol family 2
[    4.466227] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[    4.466529] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    4.466658] TCP: Hash tables configured (established 262144 bind 65536)
[    4.466714] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[    4.466796] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[    4.466911] NET: Registered protocol family 1
[    4.467435] PCI: CLS mismatch (64 != 32), using 64 bytes
[    4.467477] Unpacking initramfs...
[    4.577980] Freeing initrd memory: 8688K
[    4.578037] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    4.578040] software IO TLB [mem 0x6e97e000-0x7297e000] (64MB) mapped at [ffff965e6e97e000-ffff965e7297dfff]
[    4.578621] Scanning for low memory corruption every 60 seconds
[    4.579391] Initialise system trusted keyrings
[    4.579399] Key type blacklist registered
[    4.579441] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[    4.580302] zbud: loaded
[    4.581633] Key type asymmetric registered
[    4.581657] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    4.581700] io scheduler noop registered
[    4.581701] io scheduler deadline registered (default)
[    4.581734] io scheduler cfq registered
[    4.581735] io scheduler mq-deadline registered
[    4.581735] io scheduler kyber registered
[    4.581753] io scheduler bfq registered
[    4.583096] pcieport 0000:00:01.0: AER enabled with IRQ 25
[    4.583114] pcieport 0000:00:01.1: AER enabled with IRQ 26
[    4.583128] pcieport 0000:00:02.0: AER enabled with IRQ 28
[    4.583141] pcieport 0000:00:03.0: AER enabled with IRQ 30
[    4.583153] pcieport 0000:00:01.0: Signaling PME with IRQ 25
[    4.583161] pcieport 0000:00:01.1: Signaling PME with IRQ 26
[    4.583173] pcieport 0000:00:02.0: Signaling PME with IRQ 28
[    4.583190] pcieport 0000:00:03.0: Signaling PME with IRQ 30
[    4.583203] pcieport 0000:00:1c.0: Signaling PME with IRQ 31
[    4.583218] pcieport 0000:00:1c.1: Signaling PME with IRQ 32
[    4.583232] pcieport 0000:00:1c.4: Signaling PME with IRQ 33
[    4.583255] efifb: probing for efifb
[    4.583263] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    4.583300] efifb: framebuffer at 0xe0000000, using 34560k, total 34560k
[    4.583301] efifb: mode is 3840x2160x32, linelength=16384, pages=1
[    4.583302] efifb: scrolling: redraw
[    4.583303] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    4.599166] Console: switching to colour frame buffer device 480x135
[    4.614941] fb0: EFI VGA frame buffer device
[    4.614949] intel_idle: MWAIT substates: 0x2120
[    4.614949] intel_idle: v0.4.1 model 0x3F
[    4.615379] intel_idle: lapic_timer_reliable_states 0xffffffff
[    4.617594] ERST: Error Record Serialization Table (ERST) support is initialized.
[    4.617596] pstore: using zlib compression
[    4.617598] pstore: Registered erst as persistent store backend
[    4.617627] ghes_edac: This EDAC driver relies on BIOS to enumerate memory and get error reports.
[    4.617627] ghes_edac: Unfortunately, not all BIOSes reflect the memory layout correctly.
[    4.617628] ghes_edac: So, the end result of using this driver varies from vendor to vendor.
[    4.617628] ghes_edac: If you find incorrect reports, please contact your hardware vendor
[    4.617629] ghes_edac: to correct its BIOS.
[    4.617629] ghes_edac: This system has 8 DIMM sockets.
[    4.617726] EDAC MC0: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT)
[    4.617766] EDAC MC1: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT)
[    4.617945] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[    4.618027] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    4.618313] serial 0000:00:16.3: enabling device (0001 -> 0003)
[    4.638710] 0000:00:16.3: ttyS0 at I/O 0xf020 (irq = 17, base_baud = 115200) is a 16550A
[    4.640062] rtc_cmos 00:00: RTC can wake from S4
[    4.640179] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    4.640205] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    4.640216] intel_pstate: Intel P-state driver initializing
[    4.640790] ledtrig-cpu: registered to indicate activity on CPUs
[    4.640856] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    4.641239] NET: Registered protocol family 10
[    4.646809] Segment Routing with IPv6
[    4.646837] NET: Registered protocol family 17
[    4.649348] intel_rdt: Intel RDT L3 monitoring detected
[    4.649363] RAS: Correctable Errors collector initialized.
[    4.649397] microcode: sig=0x306f2, pf=0x1, revision=0x3b
[    4.649715] microcode: Microcode Update Driver: v2.2.
[    4.649727] sched_clock: Marking stable (4649708705, 0)->(4663172272, -13463567)
[    4.650121] registered taskstats version 1
[    4.650129] Loading compiled-in X.509 certificates
[    4.650165] zswap: loaded using pool lzo/zbud
[    4.654860] Key type big_key registered
[    4.655475]   Magic number: 6:629:374
[    4.655752] rtc_cmos 00:00: setting system clock to 2018-02-25 09:22:04 UTC (1519550524)
[    4.659499] Freeing unused kernel memory: 1416K
[    4.659500] Write protecting the kernel read-only data: 16384k
[    4.660307] Freeing unused kernel memory: 2016K
[    4.665815] Freeing unused kernel memory: 1308K
[    4.874557] nvme nvme0: pci function 0000:02:00.0
[    4.877997] SCSI subsystem initialized
[    4.880619] ACPI: bus type USB registered
[    4.880635] usbcore: registered new interface driver usbfs
[    4.880641] usbcore: registered new interface driver hub
[    4.880696] usbcore: registered new device driver usb
[    4.883287] libata version 3.00 loaded.
[    4.883935] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.886575] ehci-pci: EHCI PCI platform driver
[    4.887009] scsi host0: ata_generic
[    4.887120] scsi host1: ata_generic
[    4.887166] ata1: PATA max UDMA/100 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 16
[    4.887167] ata2: PATA max UDMA/100 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 16
[    4.887205] ahci 0000:08:00.0: version 3.0
[    4.887565] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    4.887571] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    4.887582] ehci-pci 0000:00:1a.0: debug port 2
[    4.891494] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    4.891509] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb333000
[    4.897500] ahci 0000:08:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    4.897504] ahci 0000:08:00.0: flags: 64bit ncq led clo only pio ccc 
[    4.897690] scsi host2: ahci
[    4.897742] ata3: SATA max UDMA/133 abar m8192@0xfb110000 port 0xfb110100 irq 16
[    4.920110] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    4.920275] hub 1-0:1.0: USB hub found
[    4.920280] hub 1-0:1.0: 2 ports detected
[    4.920584] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    4.920589] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    4.920601] ehci-pci 0000:00:1d.0: debug port 2
[    4.924513] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    4.924519] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb332000
[    4.950094] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    4.950339] hub 2-0:1.0: USB hub found
[    4.950348] hub 2-0:1.0: 2 ports detected
[    4.950829] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.950836] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    4.951937] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    4.951944] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    4.952210] hub 3-0:1.0: USB hub found
[    4.952232] hub 3-0:1.0: 15 ports detected
[    4.955038] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.955044] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    4.955257] hub 4-0:1.0: USB hub found
[    4.955273] hub 4-0:1.0: 6 ports detected
[    5.138678]  nvme0n1: p1 p2 p3 p4
[    5.222106] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.222334] ata3.00: ATA-9: SAMSUNG MZHPU256HCGL-000L1, UXM65L1Q, max UDMA/133
[    5.222338] ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    5.222531] ata3.00: configured for UDMA/133
[    5.241287] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG MZHPU256 5L1Q PQ: 0 ANSI: 5
[    5.245024] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    5.245054] sd 2:0:0:0: [sda] Write Protect is off
[    5.245057] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.245118] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.246684]  sda: sda1 sda2 sda3
[    5.247205] sd 2:0:0:0: [sda] Attached SCSI disk
[    5.290075] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    5.320085] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    5.320111] usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd
[    5.351251] hub 4-4:1.0: USB hub found
[    5.351779] hub 4-4:1.0: 4 ports detected
[    5.490774] hub 1-1:1.0: USB hub found
[    5.490823] hub 1-1:1.0: 6 ports detected
[    5.500058] usb 3-4: new high-speed USB device number 2 using xhci_hcd
[    5.511484] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    5.520733] hub 2-1:1.0: USB hub found
[    5.520820] hub 2-1:1.0: 8 ports detected
[    5.585919] systemd[1]: RTC configured in localtime, applying delta of 660 minutes to system time.
[    5.590148] tsc: Refined TSC clocksource calibration: 2394.455 MHz
[    5.590162] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c1579c6, max_idle_ns: 440795259439 ns
[    5.599405] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.604722] systemd[1]: systemd 237 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    5.630630] systemd[1]: Detected architecture x86-64.
[    5.634535] systemd[1]: Set hostname to <Arch>.
[    5.680786] hub 3-4:1.0: USB hub found
[    5.680805] hub 3-4:1.0: 4 ports detected
[    5.708558] systemd[1]: Created slice User and Session Slice.
[    5.708602] systemd[1]: Reached target Remote File Systems.
[    5.708647] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.708662] systemd[1]: Reached target Swap.
[    5.708679] systemd[1]: Reached target Login Prompts.
[    5.708860] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.708916] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.735329] EXT4-fs (sda2): re-mounted. Opts: discard
[    5.740098] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    5.801944] systemd-journald[309]: Received request to flush runtime journal from PID 1
[    5.815045] systemd-journald[309]: File /var/log/journal/b800cfe2776947b2a5546d1c15143cfa/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    5.830203] usb 4-5: new SuperSpeed USB device number 3 using xhci_hcd
[    5.859219] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    5.859232] ACPI: Power Button [PWRB]
[    5.859323] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    5.859354] ACPI: Power Button [PWRF]
[    6.050430] pps_core: LinuxPPS API ver. 1 registered
[    6.050432] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    6.094231] hub 4-5:1.0: USB hub found
[    6.094934] hub 4-5:1.0: 4 ports detected
[    6.120257] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    6.121117] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    6.121119] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    6.121119] RAPL PMU: hw unit of domain package 2^-14 Joules
[    6.121120] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    6.121121] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    6.147196] tpm_tis 00:04: 1.2 TPM (device-id 0x1A, rev-id 16)
[    6.220311] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[    6.220558] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    6.221861] PTP clock support registered
[    6.223267] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.224752] iTCO_vendor_support: vendor-support=0
[    6.226412] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    6.226442] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    6.236385] AVX2 version of gcm_enc/dec engaged.
[    6.236386] AES CTR mode by8 optimization enabled
[    6.243669] ipmi message handler version 39.2
[    6.245430] ipmi device interface
[    6.250371] usb 3-5: new high-speed USB device number 3 using xhci_hcd
[    6.251179] Linux agpgart interface v0.103
[    6.251192] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    6.251193] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    6.251679] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    6.285868] snd_hda_intel 0000:03:00.1: enabling device (0100 -> 0102)
[    6.285960] snd_hda_intel 0000:03:00.1: Disabling MSI
[    6.285987] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
[    6.311858] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    6.354632] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    6.442080] hub 3-5:1.0: USB hub found
[    6.442397] hub 3-5:1.0: 4 ports detected
[    6.442949] usb: port power management may be unreliable
[    6.445667] nvidia: loading out-of-tree module taints kernel.
[    6.445673] nvidia: module license 'NVIDIA' taints kernel.
[    6.445674] Disabling lock debugging due to kernel taint
[    6.453035] EDAC sbridge: Seeking for: PCI ID 8086:2fa0
[    6.453045] EDAC sbridge: Seeking for: PCI ID 8086:2fa0
[    6.453052] EDAC sbridge: Seeking for: PCI ID 8086:2f60
[    6.453057] EDAC sbridge: Seeking for: PCI ID 8086:2fa8
[    6.453060] EDAC sbridge: Seeking for: PCI ID 8086:2fa8
[    6.453063] EDAC sbridge: Seeking for: PCI ID 8086:2f71
[    6.453066] EDAC sbridge: Seeking for: PCI ID 8086:2f71
[    6.453069] EDAC sbridge: Seeking for: PCI ID 8086:2faa
[    6.453072] EDAC sbridge: Seeking for: PCI ID 8086:2faa
[    6.453075] EDAC sbridge: Seeking for: PCI ID 8086:2fab
[    6.453078] EDAC sbridge: Seeking for: PCI ID 8086:2fab
[    6.453081] EDAC sbridge: Seeking for: PCI ID 8086:2fac
[    6.453084] EDAC sbridge: Seeking for: PCI ID 8086:2fac
[    6.453087] EDAC sbridge: Seeking for: PCI ID 8086:2fad
[    6.453090] EDAC sbridge: Seeking for: PCI ID 8086:2fad
[    6.453093] EDAC sbridge: Seeking for: PCI ID 8086:2f68
[    6.453096] EDAC sbridge: Seeking for: PCI ID 8086:2f79
[    6.453100] EDAC sbridge: Seeking for: PCI ID 8086:2f6a
[    6.453104] EDAC sbridge: Seeking for: PCI ID 8086:2f6b
[    6.453108] EDAC sbridge: Seeking for: PCI ID 8086:2f6c
[    6.453112] EDAC sbridge: Seeking for: PCI ID 8086:2f6d
[    6.453115] EDAC sbridge: Seeking for: PCI ID 8086:2ffc
[    6.453118] EDAC sbridge: Seeking for: PCI ID 8086:2ffc
[    6.453122] EDAC sbridge: Seeking for: PCI ID 8086:2ffd
[    6.453124] EDAC sbridge: Seeking for: PCI ID 8086:2ffd
[    6.453128] EDAC sbridge: Seeking for: PCI ID 8086:2fbd
[    6.453132] EDAC sbridge: Seeking for: PCI ID 8086:2fbf
[    6.453135] EDAC sbridge: Seeking for: PCI ID 8086:2fbf
[    6.453138] EDAC sbridge: Seeking for: PCI ID 8086:2fb9
[    6.453142] EDAC sbridge: Seeking for: PCI ID 8086:2fb9
[    6.453144] EDAC sbridge: Seeking for: PCI ID 8086:2fbb
[    6.453148] EDAC sbridge: Seeking for: PCI ID 8086:2fbb
[    6.453197] EDAC sbridge: Couldn't find mci handler
[    6.453226] EDAC sbridge: Failed to register device with error -22.
[    6.456875] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 44:39:c4:92:5b:d1
[    6.456877] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    6.456903] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[    6.459298] e1000e 0000:00:19.0 eno1: renamed from eth0
[    6.460922] intel_rapl: Found RAPL domain package
[    6.460925] intel_rapl: Found RAPL domain dram
[    6.460927] intel_rapl: DRAM domain energy unit 15300pj
[    6.461261] nvidia-nvlink: Nvlink Core is being initialized, major device number 239
[    6.461524] nvidia 0000:03:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    6.461632] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  390.25  Wed Jan 24 20:02:43 PST 2018 (using threaded interrupts)
[    6.472493] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  390.25  Wed Jan 24 19:29:37 PST 2018
[    6.477509] [drm] [nvidia-drm] [GPU ID 0x00000300] Loading driver
[    6.477510] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:03:00.0 on minor 0
[    6.480596] EXT4-fs (sda3): recovery complete
[    6.483336] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: discard
[    6.550090] usb 3-4.2: new high-speed USB device number 4 using xhci_hcd
[    6.600192] clocksource: Switched to clocksource tsc
[    6.830047] usb 3-6: new high-speed USB device number 5 using xhci_hcd
[    7.160085] usb 3-9: new high-speed USB device number 6 using xhci_hcd
[    7.242074] random: crng init done
[    7.428459] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[    7.490062] usb 3-13: new full-speed USB device number 7 using xhci_hcd
[    7.660257] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[    7.820074] usb 3-14: new full-speed USB device number 8 using xhci_hcd
[    8.027074] hidraw: raw HID events driver (C) Jiri Kosina
[    8.029382] usbcore: registered new interface driver rtsx_usb
[    8.034994] usbcore: registered new interface driver usbhid
[    8.034995] usbhid: USB HID core driver
[    8.037705] input: LEOPOLD LEO 98Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.0/0003:0853:0138.0001/input/input6
[    8.040535] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card0/input3
[    8.063358] usbcore: registered new interface driver snd-usb-audio
[    8.100289] hid-generic 0003:0853:0138.0001: input,hidraw0: USB HID v1.11 Keyboard [LEOPOLD LEO 98Keyboard] on usb-0000:00:14.0-13/input0
[    8.100333] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card0/input4
[    8.100456] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card0/input5
[    8.100595] input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/0003:1532:0043.0002/input/input7
[    8.101347] hid-generic 0003:1532:0043.0002: input,hidraw1: USB HID v1.11 Mouse [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-14/input0
[    8.101682] input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.1/0003:1532:0043.0003/input/input8
[    8.170154] hid-generic 0003:1532:0043.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-14/input1
[    8.170316] input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.2/0003:1532:0043.0004/input/input9
[    8.214621] nvidia-modeset: Allocated GPU:0 (GPU-e363fded-2d65-7080-3a51-76150f43783b) @ PCI:0000:03:00.0
[    8.242745] hid-generic 0003:1532:0043.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-14/input2
[    8.259717] mousedev: PS/2 mouse device common for all mice
[    9.166946] media: Linux media interface: v0.10
[    9.179721] Linux video capture interface: v2.00
[    9.191800] uvcvideo: Found UVC 1.00 device Logitech Webcam C930e (046d:0843)
[    9.192070] uvcvideo 3-4.2:1.0: Entity type for entity Processing 3 was not initialized!
[    9.192072] uvcvideo 3-4.2:1.0: Entity type for entity Extension 6 was not initialized!
[    9.192073] uvcvideo 3-4.2:1.0: Entity type for entity Extension 8 was not initialized!
[    9.192074] uvcvideo 3-4.2:1.0: Entity type for entity Extension 9 was not initialized!
[    9.192075] uvcvideo 3-4.2:1.0: Entity type for entity Extension 10 was not initialized!
[    9.192076] uvcvideo 3-4.2:1.0: Entity type for entity Extension 11 was not initialized!
[    9.192077] uvcvideo 3-4.2:1.0: Entity type for entity Extension 12 was not initialized!
[    9.192078] uvcvideo 3-4.2:1.0: Entity type for entity Extension 13 was not initialized!
[    9.192079] uvcvideo 3-4.2:1.0: Entity type for entity Camera 1 was not initialized!
[    9.192132] input: Logitech Webcam C930e as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input10
[    9.192177] usbcore: registered new interface driver uvcvideo
[    9.192178] USB Video Class driver (1.1.1)
[   10.347400] fuse init (API version 7.26)
[   10.412065] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   10.412105] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[   15.390174] usb 3-4.2: reset high-speed USB device number 4 using xhci_hcd

Last edited by branchus (2018-03-11 05:59:25)

seth · 2018-02-25 09:59:32

Windows has no issue to turn itself off

https://www.tenforums.com/tutorials/418 … -10-a.html ?

branchus · 2018-02-25 11:04:09

seth wrote:

Windows has no issue to turn itself off
https://www.tenforums.com/tutorials/418 … -10-a.html ?

No, windows shuts down properly. I never use fast boot for windows.

to verify the above claim. my Arch machine cannot restart, it will hang at the shutdown cycle. the monitor goes to power saver mode, the fans going, but never going to restart. it means something provent the proper shutdown.

It was no issue until recently.
I fresh installed arch and manjaro.

first time I installed Manjaro, everything is fine. but after I upgrade to the kernel to the latest lts version. I cannot shutdown my computer properly...

seth · 2018-02-25 11:08:05

Windows uses fastboot by default - you do not have to activate it. Also it occasionally re-activates it on updates.
Since this messes with ACPI and that is, given the kernel properly shuts down and halts but the system simply doesn't power down, crucial, you should *ensure* it's not active.

branchus · 2018-02-25 11:26:15

seth wrote:

Windows uses fastboot by default - you do not have to activate it. Also it occasionally re-activates it on updates.
Since this messes with ACPI and that is, given the kernel properly shuts down and halts but the system simply doesn't power down, crucial, you should *ensure* it's not active.

Thank you for the info, however I don't think this related to the problem I have.

The windows fast boot is not active, since the first thing I do is to turn off hibernate when I fresh installed windows. and I never use sleep too.

I'm NOT running on a laptop, my machine is a workstation. I always make sure a clean start up every day. not to save couple second.

Seems both Arch and Manjaro have the same issue when I upgraded to the latest status... Both shutdown and restart doesn't work properly. The strange thing was 10 days ago, everything was smooth...
I'm downloading Ubuntu 16.04. I will report back if the older kernel will fix the issue

btw: I check the article you posted, and I can confirm windows fast boot is NOT active.

Thanks

Last edited by branchus (2018-02-25 11:27:13)

seth · 2018-02-25 11:51:01

You can also try the lts kernel (to rue out userspace issues) and first "systemctl isolate multi-user.target" and from there "systemctl poweroff" (in case this fails from some GUI session only because of, well, GUI session ;-)

branchus · 2018-02-25 13:23:07

Thank you
I tried both lts and latest kernel, no luck... I played with acpi = force, no luck

I tried Ubuntu 16.04. Everything worked out ok. Restart, shutdown with no issues...

I like rolling release, however I think I will stick with fixed release for a while for now.

seth · 2018-02-25 15:28:47

Did you try powering off from the multi-user.target (since it's apparently not the kernel; also ACPI is loaded according to your dmesg)?

branchus · 2018-02-25 20:48:36

seth wrote:

Did you try powering off from the multi-user.target (since it's apparently not the kernel; also ACPI is loaded according to your dmesg)?

Hi Seth

can you let me know how to poweroff from multi-user.target?

Thanks
Regards
JH

Last edited by branchus (2018-02-25 20:48:47)

seth · 2018-02-25 20:54:42

I actually did in comment #6 - be warned that isolating the multi-user.target will kill your GUI session, SAVE YOUR WORK BEFORE THIS!

branchus · 2018-03-11 04:23:18

seth wrote:

I actually did in comment #6 - be warned that isolating the multi-user.target will kill your GUI session, SAVE YOUR WORK BEFORE THIS!

I ran your command “systemctl multi-user.target” then monitor goes into sleep, this is exactly the same as I run “restart” or “shutdown” from GUI. Then the system stop there. Without prompt I don’t really know what to input or it is freeze already.

I tried Ubuntu 18.04, Manjaro, and Arch, when I installed the NVIDIA driver, This same problem happened.

My graphic card is nvidia quodra k2200

Any suggestion?

Thanks
Regards
Jh

Last edited by branchus (2018-03-11 06:03:13)

seth · 2018-03-11 07:49:07

The command is "systemctl isolate multi-user.target" and you should be moved to a text console (like pressing ctrl+alt+f1)
Can you boot into the multi-user.target? https://wiki.archlinux.org/index.php/Sy … _boot_into

branchus · 2018-03-11 08:48:00

seth wrote:

The command is "systemctl isolate multi-user.target" and you should be moved to a text console (like pressing ctrl+alt+f1)
Can you boot into the multi-user.target? https://wiki.archlinux.org/index.php/Sy … _boot_into

Hi Seth
Thank you for quick reply,

I ran the exact command you posted which is "systemctl isolate multi-user.target", then my monitor go straight into sleep (power saving mode) with no other response... computer still running.

I tried to press Ctrl+ Alt + F2 or F3, nothing showing up.

seth · 2018-03-11 11:49:59

seth wrote:

Can you boot into the multi-user.target? https://wiki.archlinux.org/index.php/Sy … _boot_into

branchus · 2018-03-12 04:56:04

seth wrote:

seth wrote:
Can you boot into the multi-user.target? https://wiki.archlinux.org/index.php/Sy … _boot_into

I see, you want me to check whether it is a GUI issue or not.

I will try that and report back, but probably not in recent couple of days.

my assignment is due soon and i'm on ubuntu 16.04 with nvidia driver 384, not my preferred distro, but at least it is working now.

branchus · 2018-04-04 21:26:33

I tried the new nvidia display driver, no luck
so I replaced my video card from quadro K2200 to quadro P2000.
Now problem solved.

I think the issue is caused by the compatible issue between the display driver and quadro k2200.

Arch Linux

#1 2018-02-24 22:38:44

shut down computer won't turn off power automatically.

#2 2018-02-25 09:59:32

Re: shut down computer won't turn off power automatically.

#3 2018-02-25 11:04:09

Re: shut down computer won't turn off power automatically.

#4 2018-02-25 11:08:05

Re: shut down computer won't turn off power automatically.

#5 2018-02-25 11:26:15

Re: shut down computer won't turn off power automatically.

#6 2018-02-25 11:51:01

Re: shut down computer won't turn off power automatically.

#7 2018-02-25 13:23:07

Re: shut down computer won't turn off power automatically.

#8 2018-02-25 15:28:47

Re: shut down computer won't turn off power automatically.

#9 2018-02-25 20:48:36

Re: shut down computer won't turn off power automatically.

#10 2018-02-25 20:54:42

Re: shut down computer won't turn off power automatically.

#11 2018-03-11 04:23:18

Re: shut down computer won't turn off power automatically.

#12 2018-03-11 07:49:07

Re: shut down computer won't turn off power automatically.

#13 2018-03-11 08:48:00

Re: shut down computer won't turn off power automatically.

#14 2018-03-11 11:49:59

Re: shut down computer won't turn off power automatically.

#15 2018-03-12 04:56:04

Re: shut down computer won't turn off power automatically.

#16 2018-04-04 21:26:33

Re: shut down computer won't turn off power automatically.

Board footer