You are not logged in.

#1 2018-02-27 17:42:30

5mint
Member
Registered: 2013-02-24
Posts: 20

[SOLVED] Problem with Grub after Windows 10 Upgrade to latest version

Hello
I get some problem, i thiunk this is tipical after Windows upgrade, Windows change boot sector i think... OK so i have error

Welcome to Grub!
error: unknow filesystem.
Entering rescue mode...
grub rescue>

I try boot system temporary:

ls (hd1,gpt9)
(hd1,gpt9): Filesystem is ext2,
grub rescue > root=(hd1,gpt9)
grub rescue > prefix=(hd1,gpt9)/boot/grub
grub rescue >insmod normal
grub rescue > normal

After this i have access to to Grub main window, so i can  select Windows or Arch, but problem is after booting ArchLinux i need somehow recover Grub permanently. I try

grub-install /dev/sda

Whole process finish without any error, but after restart i have same issue. I know this is looks so easy to fix but i cant do this , can i have some advice please ??

Thank You

Last edited by 5mint (2018-03-01 17:33:55)

Offline

#2 2018-02-27 18:52:19

tomsargeaunt
Member
Registered: 2014-02-04
Posts: 24

Re: [SOLVED] Problem with Grub after Windows 10 Upgrade to latest version

Have you checked these steps from the wiki?

Offline

#3 2018-02-27 23:01:20

5mint
Member
Registered: 2013-02-24
Posts: 20

Re: [SOLVED] Problem with Grub after Windows 10 Upgrade to latest version

Yes i check wiki, but not working for me, my HDD is 2TB so i think this is no problem like wiki said... Maybe this is UUIDs problem but i dont know how check it...

Offline

#4 2018-02-28 01:33:42

tomsargeaunt
Member
Registered: 2014-02-04
Posts: 24

Re: [SOLVED] Problem with Grub after Windows 10 Upgrade to latest version

Just because windows could have changed anything, have you tried regenerating the grub.cfg file?

grub-mkconfig -o /boot/grub/grub.cfg

Offline

#5 2018-02-28 04:26:01

circleface
Member
Registered: 2012-05-26
Posts: 639

Re: [SOLVED] Problem with Grub after Windows 10 Upgrade to latest version

How did you install arch and how did you install grub the first time?

Offline

#6 2018-02-28 13:28:25

7etc/
Member
Registered: 2010-05-08
Posts: 42

Re: [SOLVED] Problem with Grub after Windows 10 Upgrade to latest version

Hi, I don't see "solved" in the title, so I guess this topic is open yet..
That happend to me too. Reinstalling grub as tomsargeaunt says worked for me.
This is only one of the multiple ways to solve it and the one I prefer becouse its simplicity

With a Live Cd mount the root partition. In my case sda is the whole partition and sda5 type ext4 the root

mount -t ext4 /dev/sda5 /mnt

Then enter in chroot mode:

arch-chroot /mnt

and reinstall grub:

grub-install /dev/sda

  sda, not sda5

grub-mkconfig -o /boot/grub/grub.cfg

Exit from chroot and reboot.

(Sorry for my bad grammar....)

Offline

#7 2018-02-28 22:48:39

5mint
Member
Registered: 2013-02-24
Posts: 20

Re: [SOLVED] Problem with Grub after Windows 10 Upgrade to latest version

There is very anoin... looks like simple to fix but i try do few diffrent steps and nothing... I orginal install Arch around 3 yeras ago with Wiki guaid, same as Grub.
7etc/ i try do steps from Your post but still nothing.

What change... When i generat new grub.cfg, and when i get acces to Grub  from rescue mode i see now Arch is firs, windows is second, b4 this i have setting Windows as default... but grub still report error... I no idea how i can diagnose where is problem. I can do some screenshot  from arch or i can chroot to arch and also get some screen if anybody need to look my config or something.

Thanks

Offline

#8 2018-02-28 22:54:06

loqs
Member
Registered: 2014-03-06
Posts: 11,833

Re: [SOLVED] Problem with Grub after Windows 10 Upgrade to latest version

Please post the contents of the systems /boot/grub/grub.cfg and /etc/default/grub also the output of

# parted -l
# blkid

Offline

#9 2018-02-28 22:54:56

Head_on_a_Stick
Member
From: London
Registered: 2014-02-20
Posts: 5,542
Website

Re: [SOLVED] Problem with Grub after Windows 10 Upgrade to latest version

Is this a UEFI system?

Can we also see

# efibootmgr -v

Offline

#10 2018-02-28 23:11:56

7etc/
Member
Registered: 2010-05-08
Posts: 42

Re: [SOLVED] Problem with Grub after Windows 10 Upgrade to latest version

Yes, is necessary more detailed info about console outputs, errors, logs.. or we go nowhere trying to guess the solution...

Offline

#11 2018-03-01 01:13:49

5mint
Member
Registered: 2013-02-24
Posts: 20

Re: [SOLVED] Problem with Grub after Windows 10 Upgrade to latest version

I think this is EFI system

/boot/grub/grub.cfg

### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt9'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,gpt9' --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9  4c1fe3aa-234f-43f9-8ef1-6a03f0f6b9d5
else
  search --no-floppy --fs-uuid --set=root 4c1fe3aa-234f-43f9-8ef1-6a03f0f6b9d5
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=pl_PL
  insmod gettext
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
  set timeout_style=menu
  set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
  set timeout=5
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-4c1fe3aa-234f-43f9-8ef1-6a03f0f6b9d5' {
	load_video
	set gfxpayload=keep
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt9'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,gpt9' --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9  4c1fe3aa-234f-43f9-8ef1-6a03f0f6b9d5
	else
	  search --no-floppy --fs-uuid --set=root 4c1fe3aa-234f-43f9-8ef1-6a03f0f6b9d5
	fi
	echo	'Wczytywanie systemu Linux linux...'
	linux	/boot/vmlinuz-linux root=UUID=4c1fe3aa-234f-43f9-8ef1-6a03f0f6b9d5 rw  quiet
	echo	'Wczytywanie początkowego dysku RAM...'
	initrd  /boot/initramfs-linux.img
}
submenu 'Opcje zaawansowane dla systemu Arch Linux' $menuentry_id_option 'gnulinux-advanced-4c1fe3aa-234f-43f9-8ef1-6a03f0f6b9d5' {
	menuentry 'Arch Linux, za pomocą systemu Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-4c1fe3aa-234f-43f9-8ef1-6a03f0f6b9d5' {
		load_video
		set gfxpayload=keep
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt9'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,gpt9' --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9  4c1fe3aa-234f-43f9-8ef1-6a03f0f6b9d5
		else
		  search --no-floppy --fs-uuid --set=root 4c1fe3aa-234f-43f9-8ef1-6a03f0f6b9d5
		fi
		echo	'Wczytywanie systemu Linux linux...'
		linux	/boot/vmlinuz-linux root=UUID=4c1fe3aa-234f-43f9-8ef1-6a03f0f6b9d5 rw  quiet
		echo	'Wczytywanie początkowego dysku RAM...'
		initrd  /boot/initramfs-linux.img
	}
	menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-4c1fe3aa-234f-43f9-8ef1-6a03f0f6b9d5' {
		load_video
		set gfxpayload=keep
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt9'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,gpt9' --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9  4c1fe3aa-234f-43f9-8ef1-6a03f0f6b9d5
		else
		  search --no-floppy --fs-uuid --set=root 4c1fe3aa-234f-43f9-8ef1-6a03f0f6b9d5
		fi
		echo	'Wczytywanie systemu Linux linux...'
		linux	/boot/vmlinuz-linux root=UUID=4c1fe3aa-234f-43f9-8ef1-6a03f0f6b9d5 rw  quiet
		echo	'Wczytywanie początkowego dysku RAM...'
		initrd  /boot/initramfs-linux-fallback.img
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (na /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-efi-E658-5648' {
	insmod part_gpt
	insmod fat
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,gpt2' --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  E658-5648
	else
	  search --no-floppy --fs-uuid --set=root E658-5648
	fi
	chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

/etc/default/grub

# GRUB boot loader configuration

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX=""

# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"

# Uncomment to enable booting from LUKS encrypted devices
#GRUB_ENABLE_CRYPTODISK=y

# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true

# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console

# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto

# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep

# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true

# Uncomment and set to the desired menu colors.  Used by normal and wallpaper
# modes only.  Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"

# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"

# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"

# Uncomment to make GRUB remember the last selection. This requires to
# set 'GRUB_DEFAULT=saved' above.
#GRUB_SAVEDEFAULT="true"

parted -l

Model: ATA ST2000LM003 HN-M (scsi)
Dysk /dev/sda: 2000GB
Rozmiar sektora (logiczny/fizyczny): 512B/4096B
Tablica partycji: gpt
Flagi dysku: 

Numer  Początek  Koniec  Rozmiar  System plików   Nazwa                         Flaga
 1     1049kB    683MB   682MB    ntfs            Basic data partition          ukryta, diag
 2     683MB     955MB   273MB    fat32           EFI system partition          ładowalna, esp
 3     955MB     1089MB  134MB                    Microsoft reserved partition  msftres
 4     1089MB    364GB   362GB    ntfs            Basic data partition          msftdata
 5     364GB     364GB   952MB    ntfs                                          ukryta, diag
 6     364GB     366GB   1969MB   ntfs                                          ukryta, diag
 7     366GB     918GB   552GB    ntfs            Basic data partition          msftdata
 8     918GB     1844GB  925GB    ntfs            Basic data partition          msftdata
 9     1844GB    1968GB  124GB    ext4
10     1968GB    1972GB  4295MB   linux-swap(v1)  Linux swap
11     1972GB    2000GB  28,2GB   ntfs            Basic data partition          msftdata


Model: SanDisk Ultra Fit (scsi)
Dysk /dev/sdb: 30,8GB
Rozmiar sektora (logiczny/fizyczny): 512B/512B
Tablica partycji: msdos
Flagi dysku: 

Numer  Początek  Koniec  Rozmiar  Typ      System plików  Flaga
 1     1049kB    12,1GB  12,1GB   primary  fat32          ładowalna
 2     12,1GB    30,8GB  18,6GB   primary  ext3

blkid

/dev/sda1: LABEL="WINRE" UUID="F22881BF288182F9" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="fa450659-5def-4320-a9b7-aeea20746b89"
/dev/sda2: UUID="E658-5648" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="8da7bd8d-93a6-4759-91e4-4dab27113789"
/dev/sda3: PARTLABEL="Microsoft reserved partition" PARTUUID="65e9412e-6a97-4b6e-adfb-fc5820345ae7"
/dev/sda4: LABEL="Windows" UUID="667ED6E57ED6AD55" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="b07c517d-b693-4d4a-b07d-fc57ecc94a21"
/dev/sda5: UUID="4C6E8ED06E8EB26E" TYPE="ntfs" PARTUUID="78936750-cb83-467b-b776-954069528338"
/dev/sda6: UUID="C85A55D25A55BDBE" TYPE="ntfs" PARTUUID="474dec83-2760-41c0-8671-a6d1eaeca436"
/dev/sda7: LABEL="MAGAZYN" UUID="0FB10F150FB10F15" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="521eb686-5b13-11e5-826a-5ce0c582dcb3"
/dev/sda8: LABEL="DODATKOWY" UUID="0FB71BB60FB71BB6" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="2953c8a0-5b26-11e5-826b-5ce0c582dcb3"
/dev/sda9: LABEL="Arch" UUID="4c1fe3aa-234f-43f9-8ef1-6a03f0f6b9d5" TYPE="ext4" PARTUUID="8daea669-8c1d-44bb-a731-7e705dbc1a9b"
/dev/sda10: LABEL="Linux Swap" UUID="b2e3cae6-c10e-4714-990b-89de45e3bdf1" TYPE="swap" PARTLABEL="Linux swap" PARTUUID="3c6c250f-6f85-4e8e-b120-1866507b0de2"
/dev/sda11: LABEL="RECOVERY" UUID="64F23BEAF23BBF5C" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="924c10a3-4f91-4b88-bc4e-fcc263520fa2"
/dev/sdb1: LABEL="UUI" UUID="0CAA-1374" TYPE="vfat" PARTUUID="5a81be98-01"
/dev/sdb2: LABEL="persistence" UUID="dfdd6d31-d9e1-7544-a220-d6bc77523077" TYPE="ext3" PARTUUID="5a81be98-02"

efibootmgr -v

BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0000,0001,0003,2001,2002,2004
Boot0000* grub  HD(2,GPT,8da7bd8d-93a6-4759-91e4-4dab27113789,0x145800,0x82000)/File(\EFI\grub\grubx64.efi)
Boot0001* Windows Boot Manager  HD(2,GPT,8da7bd8d-93a6-4759-91e4-4dab27113789,0x145800,0x82000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0002* USB Hard Drive (UEFI) - SanDisk       PciRoot(0x0)/Pci(0x14,0x0)/USB(11,0)/HD(1,MBR,0x5a81be98,0x800,0x169b000)RC
Boot0003* arch  HD(2,GPT,8da7bd8d-93a6-4759-91e4-4dab27113789,0x145800,0x82000)/File(\EFI\arch\grubx64.efi)
Boot2001* EFI USB Device        RC
Boot2002* EFI DVD/CDROM RC
Boot3000* Internal Hard Disk or Solid State Disk        RC

Thank You

Offline

#12 2018-03-01 09:07:35

Head_on_a_Stick
Member
From: London
Registered: 2014-02-20
Posts: 5,542
Website

Re: [SOLVED] Problem with Grub after Windows 10 Upgrade to latest version

Try

# efibootmgr -o 3,1

If that works, delete the extraneous GRUB entry:

# efibootmgr -b 0 -B

Also, how have you mounted your EFI system partition?

Please post the output of

lsblk -f

Your Arch GRUB entry seems to be booting /boot/vmlinuz from /dev/sda9, is that correct?

It may be preferable to mount /boot to the ESP to allow more flexibility and not be locked in to GRUB.

Offline

#13 2018-03-01 17:17:27

5mint
Member
Registered: 2013-02-24
Posts: 20

Re: [SOLVED] Problem with Grub after Windows 10 Upgrade to latest version

HI
Yest i have install everything on  one partition /dev/sda9, i dont know what happened, everything work perfect over 3 yaers, b4 on my old laptop same... but now i dont know... alternativly i can reinstall Arch but i dont want to install everything again all package, etc, so that way o try fix it first.

this is my lsblk -r

sda 8:0 0 1,8T 0 disk 
sda1 8:1 0 650M 0 part 
sda2 8:2 0 260M 0 part /boot/efi
sda3 8:3 0 128M 0 part 
sda4 8:4 0 337,6G 0 part 
sda5 8:5 0 908M 0 part 
sda6 8:6 0 1,9G 0 part 
sda7 8:7 0 514G 0 part 
sda8 8:8 0 861,9G 0 part 
sda9 8:9 0 115,6G 0 part /
sda10 8:10 0 4G 0 part 
sda11 8:11 0 26,3G 0 part 
sdb 8:16 1 28,7G 0 disk 
sdb1 8:17 1 11,3G 0 part 
sdb2 8:18 1 17,3G 0 part 
sr0 11:0 1 1024M 0 rom 

Last edited by 5mint (2018-03-01 17:18:40)

Offline

#14 2018-03-01 17:26:26

Head_on_a_Stick
Member
From: London
Registered: 2014-02-20
Posts: 5,542
Website

Re: [SOLVED] Problem with Grub after Windows 10 Upgrade to latest version

5mint wrote:

i can reinstall Arch

You don't have to reinstall just to change a mountpoint and there should be no need to mount the ESP to /boot if you are using GRUB.

Try re-ordering the NVRAM entries, as I suggested.

Offline

#15 2018-03-01 17:33:28

5mint
Member
Registered: 2013-02-24
Posts: 20

Re: [SOLVED] Problem with Grub after Windows 10 Upgrade to latest version

@Head_on_a_Stick
oot
Working now, only i have to setting in Bios default bootmanager to Grub and now all good.
Thank You for help Head_on_a_Stick and thanks for everybody to try fix it. That very good Arch Linux community is so helpful...

On the  end i try undersand what problem that was ??

Thanks again

Offline

#16 2018-03-01 17:47:09

Head_on_a_Stick
Member
From: London
Registered: 2014-02-20
Posts: 5,542
Website

Re: [SOLVED] Problem with Grub after Windows 10 Upgrade to latest version

5mint wrote:

i have to setting in Bios default bootmanager to Grub and now all good

What is the order in the output of `efibootmgr` now?

Is the "arch" entry now listed as first to boot?

It could be that your motherboard does not accept modifications via `efibootmgr -o` for whatever reason, I suppose.

Offline

#17 2018-03-01 17:50:47

5mint
Member
Registered: 2013-02-24
Posts: 20

Re: [SOLVED] Problem with Grub after Windows 10 Upgrade to latest version

BootCurrent: 0003
Timeout: 0 seconds
BootOrder: 0003,0001,2001,2002,2004
Boot0000* USB Hard Drive (UEFI) - SanDisk
Boot0001* Windows Boot Manager
Boot0002* USB Hard Drive (UEFI) - SanDisk
Boot0003* arch
Boot2001* EFI USB Device
Boot2002* EFI DVD/CDROM
Boot3000* Internal Hard Disk or Solid State Disk
Boot3003* Internal Hard Disk or Solid State Disk

Offline

#18 2018-03-01 17:52:00

Head_on_a_Stick
Member
From: London
Registered: 2014-02-20
Posts: 5,542
Website

Re: [SOLVED] Problem with Grub after Windows 10 Upgrade to latest version

So did the `efibootmgr` command not work then?

Is that why you resorted to the firmware ("BIOS") options?

Offline

#19 2018-03-01 19:20:10

5mint
Member
Registered: 2013-02-24
Posts: 20

Re: [SOLVED] Problem with Grub after Windows 10 Upgrade to latest version

It work, i just follow Your advise #12 after reboot Windows start loading, so i just restart my laptop and go to bios setting, and from booting option choice grub as defaullt, and now all working fine, grub woking good, so Your advice was goog , all OK now .

Offline

#20 2018-03-01 19:25:05

Head_on_a_Stick
Member
From: London
Registered: 2014-02-20
Posts: 5,542
Website

Re: [SOLVED] Problem with Grub after Windows 10 Upgrade to latest version

OK, good, thanks for reporting back smile

Offline

Board footer

Powered by FluxBB