You are not logged in.

#1 2018-03-03 20:17:00

Ackio
Member
Registered: 2018-03-03
Posts: 13

[SOLVED] Random hard freezing in Arch Linux

Recently, Arch Linux started to freeze randomly (maybe not so randomly so: it also freezes when I run the "man" command). Initially, I considered the possibility of the culprit being Gnome, but it did not make much difference to install LXDE (any attempt to install Xfce failed).

DE: Gnome 3.26.2
Xorg Server: 1.19.6+13+gd0d1a694f-1
Kernel: Linux 4.15.6-1
CPU (/proc/cpuinfo): Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz
CPU Flags (/proc/cpuinfo): fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm cpuid_fault epb pti tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms xsaveopt dtherm ida arat pln pts
CPU Bugs (/proc/cpuinfo): cpu_meltdown spectre_v1 spectre_v2

I tried installing LXDE in an attempt to find out if the problem is Gnome, but they both froze the same way. Switching to tty does not work. The Magic Keys also do not work. Is there anything I can try to solve this?

dmesg output:

[    0.000000] Linux version 4.15.6-1-ARCH (builduser@heftig-12497) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Sun Feb 25 12:53:23 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/Core-root rw cryptdevice=/dev/sda2:Core quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a57affff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a57b0000-0x00000000a61affff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a61b0000-0x00000000aaabefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000aaabf000-0x00000000aaebefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aaebf000-0x00000000aafbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aafbf000-0x00000000aaffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000aafff000-0x00000000aaffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ab000000-0x00000000af9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Gateway NE570/EA50_CX   , BIOS V2.06 10/08/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x24f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 0A0000000 mask FF8000000 write-back
[    0.000000]   3 base 0A8000000 mask FFE000000 write-back
[    0.000000]   4 base 0AA000000 mask FFF000000 write-back
[    0.000000]   5 base 0FF800000 mask FFF800000 write-protect
[    0.000000]   6 base 100000000 mask F00000000 write-back
[    0.000000]   7 base 200000000 mask F80000000 write-back
[    0.000000]   8 base 24F600000 mask FFFE00000 uncachable
[    0.000000]   9 base 24F800000 mask FFF800000 uncachable
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0xab000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] BRK [0x24363a000, 0x24363afff] PGTABLE
[    0.000000] BRK [0x24363b000, 0x24363bfff] PGTABLE
[    0.000000] BRK [0x24363c000, 0x24363cfff] PGTABLE
[    0.000000] BRK [0x24363d000, 0x24363dfff] PGTABLE
[    0.000000] BRK [0x24363e000, 0x24363efff] PGTABLE
[    0.000000] BRK [0x24363f000, 0x24363ffff] PGTABLE
[    0.000000] BRK [0x243640000, 0x243640fff] PGTABLE
[    0.000000] BRK [0x243641000, 0x243641fff] PGTABLE
[    0.000000] BRK [0x243642000, 0x243642fff] PGTABLE
[    0.000000] BRK [0x243643000, 0x243643fff] PGTABLE
[    0.000000] BRK [0x243644000, 0x243644fff] PGTABLE
[    0.000000] BRK [0x243645000, 0x243645fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3617f000-0x370b6fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x00000000AAFFE210 00009C (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000AAFFB000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: DSDT 0x00000000AAFEC000 00BB8D (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: FACS 0x00000000AAFBA000 000040
[    0.000000] ACPI: UEFI 0x00000000AAFFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: ASF! 0x00000000AAFFC000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: HPET 0x00000000AAFFA000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: APIC 0x00000000AAFF9000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MCFG 0x00000000AAFF8000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 0x00000000AAFEB000 0006FE (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: BOOT 0x00000000AAFE9000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: ASPT 0x00000000AAFE4000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: DBGP 0x00000000AAFE3000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: FPDT 0x00000000AAFE1000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MSDM 0x00000000AAFE0000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 0x00000000AAFDF000 0008E4 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x00000000AAFDE000 000A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: DMAR 0x00000000AAFDD000 0000B8 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000024f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x24f5f8000-0x24f5fafff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000024f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.000000]   node   0: [mem 0x0000000040005000-0x00000000a57affff]
[    0.000000]   node   0: [mem 0x00000000a61b0000-0x00000000aaabefff]
[    0.000000]   node   0: [mem 0x00000000aafff000-0x00000000aaffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000024f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000024f5fffff]
[    0.000000] On node 0 totalpages: 2069595
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10811 pages used for memmap
[    0.000000]   DMA32 zone: 691903 pages, LIFO batch:31
[    0.000000]   Normal zone: 21464 pages used for memmap
[    0.000000]   Normal zone: 1373696 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 100 pages
[    0.000000] Reserving Intel graphics memory at 0x00000000aba00000-0x00000000af9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa57b0000-0xa61affff]
[    0.000000] PM: Registered nosave memory: [mem 0xaaabf000-0xaaebefff]
[    0.000000] PM: Registered nosave memory: [mem 0xaaebf000-0xaafbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xaafbf000-0xaaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xab000000-0xaf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0xafa00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @        (ptrval) s147456 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2037235
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/Core-root rw cryptdevice=/dev/sda2:Core quiet
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8041352K/8278380K available (10252K kernel code, 1250K rwdata, 3224K rodata, 1432K init, 632K bss, 237028K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 31419 entries in 123 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: .
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] DMAR: Host address width 36
[    0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.000000] DMAR: RMRR base: 0x000000aae8c000 end: 0x000000aaeabfff
[    0.000000] DMAR: RMRR base: 0x000000ab800000 end: 0x000000af9fffff
[    0.000000] DMAR-IR: IOAPIC id 0 under DRHD base  0xfed91000 IOMMU 1
[    0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.000000] x2apic enabled
[    0.000000] Switched APIC routing to cluster x2apic.
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.005000] tsc: Fast TSC calibration using PIT
[    0.006000] tsc: Detected 1795.892 MHz processor
[    0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.78 BogoMIPS (lpj=1795892)
[    0.006000] pid_max: default: 32768 minimum: 301
[    0.006000] Security Framework initialized
[    0.006000] Yama: becoming mindful.
[    0.007680] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.008474] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.008516] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.008541] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.008821] CPU: Physical Processor ID: 0
[    0.008822] CPU: Processor Core ID: 0
[    0.008829] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.008829] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.008834] mce: CPU supports 7 MCE banks
[    0.008845] CPU0: Thermal monitoring enabled (TM1)
[    0.008858] process: using mwait in idle threads
[    0.008861] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.008863] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.008865] Spectre V2 : Mitigation: Full generic retpoline
[    0.009008] Freeing SMP alternatives memory: 24K
[    0.010089] TSC deadline timer enabled
[    0.010094] smpboot: CPU0: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.014022] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.014068] ... version:                3
[    0.014069] ... bit width:              48
[    0.014070] ... generic registers:      4
[    0.014071] ... value mask:             0000ffffffffffff
[    0.014072] ... max period:             00007fffffffffff
[    0.014073] ... fixed-purpose events:   3
[    0.014074] ... event mask:             000000070000000f
[    0.016009] Hierarchical SRCU implementation.
[    0.022311] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.024008] smp: Bringing up secondary CPUs ...
[    0.033044] x86: Booting SMP configuration:
[    0.033046] .... node  #0, CPUs:      #1 #2 #3
[    0.054043] smp: Brought up 1 node, 4 CPUs
[    0.054043] smpboot: Max logical packages: 2
[    0.054043] smpboot: Total of 4 processors activated (14367.13 BogoMIPS)
[    0.055384] devtmpfs: initialized
[    0.055384] x86/mm: Memory block size: 128MB
[    0.056525] PM: Registering ACPI NVS region [mem 0xaaebf000-0xaafbefff] (1048576 bytes)
[    0.056525] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.056525] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.056525] pinctrl core: initialized pinctrl subsystem
[    0.056525] RTC time: 19:29:03, date: 03/03/18
[    0.057064] NET: Registered protocol family 16
[    0.057283] cpuidle: using governor ladder
[    0.059021] cpuidle: using governor menu
[    0.059056] Simple Boot Flag at 0x44 set to 0x1
[    0.059074] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.059076] ACPI: bus type PCI registered
[    0.059078] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.059160] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.059169] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.059169] PCI: Using configuration type 1 for base access
[    0.059172] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.060051] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.061084] ACPI: Added _OSI(Module Device)
[    0.061086] ACPI: Added _OSI(Processor Device)
[    0.061087] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.061089] ACPI: Added _OSI(Processor Aggregator Device)
[    0.061318] ACPI: Executed 1 blocks of module-level executable AML code
[    0.070421] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.070553] ACPI: Dynamic OEM Table Load:
[    0.070553] ACPI: SSDT 0xFFFF9E25457DC000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.072292] ACPI: Dynamic OEM Table Load:
[    0.072301] ACPI: SSDT 0xFFFF9E25450E8800 000303 (v01 PmRef  ApIst    00003000 INTL 20120913)
[    0.072689] ACPI: Dynamic OEM Table Load:
[    0.072689] ACPI: SSDT 0xFFFF9E25450B9800 000119 (v01 PmRef  ApCst    00003000 INTL 20120913)
[    0.074443] ACPI: EC: EC started
[    0.074444] ACPI: EC: interrupt blocked
[    0.074664] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.074666] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.074669] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.074669] ACPI: Interpreter enabled
[    0.074702] ACPI: (supports S0 S3 S4 S5)
[    0.074703] ACPI: Using IOAPIC for interrupt routing
[    0.074745] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.075100] ACPI: Enabled 9 GPEs in block 00 to 3F
[    0.217638] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.217647] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.217960] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.218953] PCI host bridge to bus 0000:00
[    0.218957] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.218959] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.218961] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.218964] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff window]
[    0.218966] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.218978] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.219126] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.219141] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[    0.219149] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.219155] pci 0000:00:02.0: reg 0x20: [io  0x2000-0x203f]
[    0.219354] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.219385] pci 0000:00:14.0: reg 0x10: [mem 0xc0600000-0xc060ffff 64bit]
[    0.219472] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.219596] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.219628] pci 0000:00:16.0: reg 0x10: [mem 0xc0614000-0xc061400f 64bit]
[    0.219717] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.219841] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.219869] pci 0000:00:1a.0: reg 0x10: [mem 0xc0619000-0xc06193ff]
[    0.219975] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.220105] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.220133] pci 0000:00:1b.0: reg 0x10: [mem 0xc0610000-0xc0613fff 64bit]
[    0.220224] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.220351] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.220456] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.220584] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.220686] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.220823] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.220851] pci 0000:00:1d.0: reg 0x10: [mem 0xc0618000-0xc06183ff]
[    0.220954] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.221080] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    0.221313] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.221338] pci 0000:00:1f.2: reg 0x10: [io  0x2088-0x208f]
[    0.221348] pci 0000:00:1f.2: reg 0x14: [io  0x2094-0x2097]
[    0.221358] pci 0000:00:1f.2: reg 0x18: [io  0x2080-0x2087]
[    0.221368] pci 0000:00:1f.2: reg 0x1c: [io  0x2090-0x2093]
[    0.221378] pci 0000:00:1f.2: reg 0x20: [io  0x2060-0x207f]
[    0.221388] pci 0000:00:1f.2: reg 0x24: [mem 0xc0617000-0xc06177ff]
[    0.221442] pci 0000:00:1f.2: PME# supported from D3hot
[    0.221555] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.221579] pci 0000:00:1f.3: reg 0x10: [mem 0xc0615000-0xc06150ff 64bit]
[    0.221604] pci 0000:00:1f.3: reg 0x20: [io  0x2040-0x205f]
[    0.221864] pci 0000:02:00.0: [14e4:16b3] type 00 class 0x020000
[    0.221932] pci 0000:02:00.0: reg 0x10: [mem 0xc0410000-0xc041ffff 64bit pref]
[    0.221963] pci 0000:02:00.0: reg 0x18: [mem 0xc0420000-0xc042ffff 64bit pref]
[    0.222023] pci 0000:02:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref]
[    0.222207] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.222377] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501
[    0.222440] pci 0000:02:00.1: reg 0x10: [mem 0xc0400000-0xc040ffff 64bit pref]
[    0.222705] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[    0.225124] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.225137] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[    0.225236] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000
[    0.225284] pci 0000:03:00.0: reg 0x10: [mem 0xc0500000-0xc057ffff 64bit]
[    0.225353] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.225452] pci 0000:03:00.0: supports D1 D2
[    0.225455] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.228048] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.228056] pci 0000:00:1c.1:   bridge window [mem 0xc0500000-0xc05fffff]
[    0.294524] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.294639] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.294748] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.294859] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.294976] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.295093] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.295203] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.295312] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.295437] ACPI: EC: interrupt unblocked
[    0.295437] ACPI: EC: event unblocked
[    0.295437] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.295437] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.295437] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.295437] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.295437] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.295437] vgaarb: loaded
[    0.295437] EDAC MC: Ver: 3.0.0
[    0.296031] PCI: Using ACPI for IRQ routing
[    0.298056] PCI: pci_cache_line_size set to 64 bytes
[    0.298177] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.298179] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.298181] e820: reserve RAM buffer [mem 0xa57b0000-0xa7ffffff]
[    0.298182] e820: reserve RAM buffer [mem 0xaaabf000-0xabffffff]
[    0.298184] e820: reserve RAM buffer [mem 0xab000000-0xabffffff]
[    0.298185] e820: reserve RAM buffer [mem 0x24f600000-0x24fffffff]
[    0.298313] NetLabel: Initializing
[    0.298314] NetLabel:  domain hash size = 128
[    0.298315] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.298336] NetLabel:  unlabeled traffic allowed by default
[    0.298360] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.298360] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.300023] clocksource: Switched to clocksource hpet
[    0.313984] VFS: Disk quotas dquot_6.6.0
[    0.314018] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.314111] pnp: PnP ACPI init
[    0.314240] pnp 00:00: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[    0.314344] pnp 00:01: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active)
[    0.314578] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.314581] system 00:02: [io  0xfd60-0xfd63] has been reserved
[    0.314584] system 00:02: [io  0x1000-0x100f] has been reserved
[    0.314586] system 00:02: [io  0xffff] has been reserved
[    0.314589] system 00:02: [io  0xffff] has been reserved
[    0.314591] system 00:02: [io  0x0400-0x0453] has been reserved
[    0.314594] system 00:02: [io  0x0458-0x047f] has been reserved
[    0.314596] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.314599] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.314606] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.314640] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.314716] system 00:04: [io  0x0454-0x0457] has been reserved
[    0.314722] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.380301] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.380304] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.380307] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.380309] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.380312] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.380315] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.380317] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.380320] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[    0.380323] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[    0.380326] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.380328] system 00:05: [mem 0xafa00000-0xafa00fff] has been reserved
[    0.380334] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.380737] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[    0.380740] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
[    0.380745] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.380777] pnp: PnP ACPI: found 7 devices
[    0.387626] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.387633] pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pref]: no compatible bridge window
[    0.387637] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.387668] pci 0000:00:1c.0: BAR 14: assigned [mem 0xafb00000-0xafbfffff]
[    0.387673] pci 0000:02:00.0: BAR 6: assigned [mem 0xafb00000-0xafb007ff pref]
[    0.387676] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.387683] pci 0000:00:1c.0:   bridge window [mem 0xafb00000-0xafbfffff]
[    0.387688] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[    0.387698] pci 0000:03:00.0: BAR 6: assigned [mem 0xc0580000-0xc058ffff pref]
[    0.387700] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.387706] pci 0000:00:1c.1:   bridge window [mem 0xc0500000-0xc05fffff]
[    0.387718] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.387720] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.387722] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.387725] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff window]
[    0.387727] pci_bus 0000:02: resource 1 [mem 0xafb00000-0xafbfffff]
[    0.387729] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
[    0.387732] pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff]
[    0.387888] NET: Registered protocol family 2
[    0.388119] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.388293] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.388438] TCP: Hash tables configured (established 65536 bind 65536)
[    0.388487] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.388517] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.388592] NET: Registered protocol family 1
[    0.388609] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.414227] PCI: CLS 64 bytes, default 64
[    0.414281] Unpacking initramfs...
[    0.780746] Freeing initrd memory: 15584K
[    0.780787] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.780792] software IO TLB [mem 0xa6abf000-0xaaabf000] (64MB) mapped at [00000000613c0dbc-00000000b7ba7bb4]
[    0.780996] Scanning for low memory corruption every 60 seconds
[    0.781731] Initialise system trusted keyrings
[    0.781748] Key type blacklist registered
[    0.781826] workingset: timestamp_bits=44 max_order=21 bucket_order=0
[    0.783178] zbud: loaded
[    0.785563] Key type asymmetric registered
[    0.785566] Asymmetric key parser 'x509' registered
[    0.785612] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.785666] io scheduler noop registered
[    0.785667] io scheduler deadline registered
[    0.785725] io scheduler cfq registered (default)
[    0.785726] io scheduler mq-deadline registered
[    0.785728] io scheduler kyber registered
[    0.785758] io scheduler bfq registered
[    0.786440] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    0.786441] vesafb: scrolling: redraw
[    0.786444] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.786459] vesafb: framebuffer at 0xb0000000, mapped to 0x00000000acefab0f, using 4160k, total 4160k
[    0.883013] Console: switching to colour frame buffer device 170x48
[    0.979093] fb0: VESA VGA frame buffer device
[    0.979118] intel_idle: MWAIT substates: 0x21120
[    0.979120] intel_idle: v0.4.1 model 0x3A
[    0.979332] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.979396] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[    0.979410] ACPI: Power Button [PWRB]
[    0.979456] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input1
[    0.979466] ACPI: Lid Switch [LID0]
[    0.979504] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input2
[    0.979515] ACPI: Sleep Button [SLPB]
[    0.979573] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.979613] ACPI: Power Button [PWRF]
[    0.980254] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.981573] intel_pstate: Intel P-state driver initializing
[    0.981868] ledtrig-cpu: registered to indicate activity on CPUs
[    0.982477] NET: Registered protocol family 10
[    0.992912] Segment Routing with IPv6
[    0.992979] NET: Registered protocol family 17
[    0.993761] RAS: Correctable Errors collector initialized.
[    0.993850] microcode: sig=0x306a9, pf=0x10, revision=0x19
[    0.994112] microcode: Microcode Update Driver: v2.2.
[    0.994137] sched_clock: Marking stable (994093781, 0)->(1016757458, -22663677)
[    0.994833] registered taskstats version 1
[    0.994849] Loading compiled-in X.509 certificates
[    0.994891] zswap: loaded using pool lzo/zbud
[    0.998918] Key type big_key registered
[    0.999555]   Magic number: 10:148:495
[    0.999652] hctosys: unable to open rtc device (rtc0)
[    1.004622] Freeing unused kernel memory: 1432K
[    1.004625] Write protecting the kernel read-only data: 16384k
[    1.006159] Freeing unused kernel memory: 2016K
[    1.011470] Freeing unused kernel memory: 872K
[    1.089822] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.104822] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.104890] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.109869] ACPI: bus type USB registered
[    1.109897] usbcore: registered new interface driver usbfs
[    1.109908] usbcore: registered new interface driver hub
[    1.109940] usbcore: registered new device driver usb
[    1.112779] SCSI subsystem initialized
[    1.113327] sdhci: Secure Digital Host Controller Interface driver
[    1.113329] sdhci: Copyright(c) Pierre Ossman
[    1.114062] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 1)
[    1.116157] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA 64-bit
[    1.120261] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.120811] ehci-pci: EHCI PCI platform driver
[    1.121036] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.121044] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.121068] ehci-pci 0000:00:1a.0: debug port 2
[    1.122052] AVX version of gcm_enc/dec engaged.
[    1.122053] AES CTR mode by8 optimization enabled
[    1.122251] libata version 3.00 loaded.
[    1.124988] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.125025] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0619000
[    1.132036] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.132202] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.132205] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.132207] usb usb1: Product: EHCI Host Controller
[    1.132209] usb usb1: Manufacturer: Linux 4.15.6-1-ARCH ehci_hcd
[    1.132210] usb usb1: SerialNumber: 0000:00:1a.0
[    1.132391] hub 1-0:1.0: USB hub found
[    1.132403] hub 1-0:1.0: 2 ports detected
[    1.132795] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.132802] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.132816] ehci-pci 0000:00:1d.0: debug port 2
[    1.136734] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.136753] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0618000
[    1.143019] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.143082] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.143084] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.143085] usb usb2: Product: EHCI Host Controller
[    1.143087] usb usb2: Manufacturer: Linux 4.15.6-1-ARCH ehci_hcd
[    1.143088] usb usb2: SerialNumber: 0000:00:1d.0
[    1.143210] hub 2-0:1.0: USB hub found
[    1.143217] hub 2-0:1.0: 2 ports detected
[    1.143556] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.143571] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.144680] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[    1.144686] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.144823] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.144824] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.144826] usb usb3: Product: xHCI Host Controller
[    1.144827] usb usb3: Manufacturer: Linux 4.15.6-1-ARCH xhci-hcd
[    1.144829] usb usb3: SerialNumber: 0000:00:14.0
[    1.144970] hub 3-0:1.0: USB hub found
[    1.144985] hub 3-0:1.0: 4 ports detected
[    1.145550] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.145555] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.145618] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.145620] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.145622] usb usb4: Product: xHCI Host Controller
[    1.145625] usb usb4: Manufacturer: Linux 4.15.6-1-ARCH xhci-hcd
[    1.145627] usb usb4: SerialNumber: 0000:00:14.0
[    1.145770] hub 4-0:1.0: USB hub found
[    1.145784] hub 4-0:1.0: 4 ports detected
[    1.146316] ahci 0000:00:1f.2: version 3.0
[    1.146502] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.146529] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[    1.146533] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
[    1.147121] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.147295] scsi host0: ahci
[    1.147444] scsi host1: ahci
[    1.147867] scsi host2: ahci
[    1.149037] scsi host3: ahci
[    1.149154] scsi host4: ahci
[    1.149268] scsi host5: ahci
[    1.149323] ata1: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617100 irq 27
[    1.149325] ata2: DUMMY
[    1.149326] ata3: DUMMY
[    1.149327] ata4: DUMMY
[    1.149329] ata5: DUMMY
[    1.149330] ata6: DUMMY
[    1.457099] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.462107] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.465113] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.465119] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[    1.468431] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/133
[    1.468438] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.474825] ata1.00: configured for UDMA/133
[    1.475465] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5
[    1.484666] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.484677] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.484719] sd 0:0:0:0: [sda] Write Protect is off
[    1.484726] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.484793] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.510832]  sda: sda1 sda2
[    1.511337] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.585502] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.585511] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.586108] hub 1-1:1.0: USB hub found
[    1.586282] hub 1-1:1.0: 6 ports detected
[    1.593830] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.593838] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.594457] hub 2-1:1.0: USB hub found
[    1.594605] hub 2-1:1.0: 8 ports detected
[    1.603557] usb 3-2: New USB device found, idVendor=05e3, idProduct=0610
[    1.603562] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.603565] usb 3-2: Product: USB2.0 Hub
[    1.603567] usb 3-2: Manufacturer: GenesysLogic
[    1.604893] hub 3-2:1.0: USB hub found
[    1.606346] hub 3-2:1.0: 4 ports detected
[    1.823649] tsc: Refined TSC clocksource calibration: 1795.921 MHz
[    1.823663] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e31c6d649, max_idle_ns: 440795292875 ns
[    1.831173] device-mapper: uevent: version 1.0.3
[    1.831259] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.863156] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[    1.900143] usb 3-2.1: new high-speed USB device number 3 using xhci_hcd
[    1.977357] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b3f6
[    1.977365] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.977370] usb 1-1.3: Product: HD WebCam
[    1.977375] usb 1-1.3: Manufacturer: Chicony Electronics Co.,Ltd.
[    1.977379] usb 1-1.3: SerialNumber: 0001
[    1.991590] usb 3-2.1: New USB device found, idVendor=05e3, idProduct=0610
[    1.991595] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.991598] usb 3-2.1: Product: USB2.0 Hub
[    1.991601] usb 3-2.1: Manufacturer: GenesysLogic
[    1.992947] hub 3-2.1:1.0: USB hub found
[    1.994329] hub 3-2.1:1.0: 4 ports detected
[    2.072147] usb 3-2.3: new low-speed USB device number 4 using xhci_hcd
[    2.155939] usb 3-2.3: New USB device found, idVendor=046d, idProduct=c077
[    2.155947] usb 3-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.155952] usb 3-2.3: Product: USB Optical Mouse
[    2.155956] usb 3-2.3: Manufacturer: Logitech
[    2.164423] hidraw: raw HID events driver (C) Jiri Kosina
[    2.167884] usbcore: registered new interface driver usbhid
[    2.167888] usbhid: USB HID core driver
[    2.170683] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.3/3-2.3:1.0/0003:046D:C077.0001/input/input6
[    2.170782] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-2.3/input0
[    2.226172] usb 3-2.4: new low-speed USB device number 5 using xhci_hcd
[    2.310632] usb 3-2.4: New USB device found, idVendor=1c4f, idProduct=0026
[    2.310641] usb 3-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.310646] usb 3-2.4: Product: USB Keyboard
[    2.310650] usb 3-2.4: Manufacturer: SIGMACHIP
[    2.314664] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4:1.0/0003:1C4F:0026.0002/input/input7
[    2.322149] usb 1-1.1: new full-speed USB device number 4 using ehci-pci
[    2.366391] hid-generic 0003:1C4F:0026.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-2.4/input0
[    2.369697] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4:1.1/0003:1C4F:0026.0003/input/input8
[    2.401733] usb 1-1.1: New USB device found, idVendor=04ca, idProduct=300b
[    2.401741] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.421354] hid-generic 0003:1C4F:0026.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-2.4/input1
[    2.831363] clocksource: Switched to clocksource tsc
[    4.567518] random: crng init done
[   15.328527] NET: Registered protocol family 38
[   33.453400] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[   35.100895] ip_tables: (C) 2000-2006 Netfilter Core Team
[   35.171418] systemd[1]: systemd 237 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[   35.183685] systemd[1]: Detected architecture x86-64.
[   35.221537] systemd[1]: Set hostname to <timemachine>.
[   38.058346] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   38.059689] systemd[1]: Created slice User and Session Slice.
[   38.059840] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   38.059911] systemd[1]: Reached target Login Prompts.
[   38.059943] systemd[1]: Reached target Remote File Systems.
[   38.060474] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   38.060525] systemd[1]: Reached target Local Encrypted Volumes.
[   38.538594] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
[   38.809788] systemd-journald[332]: Received request to flush runtime journal from PID 1
[   39.104739] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   39.491736] systemd-journald[332]: File /var/log/journal/80a9036dbd8c4f8eb4225d5c9518d622/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   39.507858] vboxdrv: loading out-of-tree module taints kernel.
[   39.513942] vboxdrv: Found 4 processor cores
[   39.530273] vboxdrv: TSC mode is Invariant, tentative frequency 1795916462 Hz
[   39.530275] vboxdrv: Successfully loaded version 5.2.8 (interface 0x00290001)
[   39.556825] VBoxPciLinuxInit
[   39.556840] vboxpci: IOMMU not found (not registered)
[   39.581379] VBoxNetAdp: Successfully started.
[   39.614505] VBoxNetFlt: Successfully started.
[   42.935720] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   43.012308] rtc_cmos 00:03: RTC can wake from S4
[   43.012444] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[   43.012478] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[   43.018505] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   43.074693] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[   43.074702] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   43.074705] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   43.074711] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   43.074712] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   43.074717] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   43.074718] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[   43.074723] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   43.074724] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   43.342394] Linux agpgart interface v0.103
[   43.365092] [Firmware Bug]: battery: (dis)charge rate invalid.
[   43.365140] ACPI: Battery Slot [BAT1] (battery present)
[   43.370730] pps_core: LinuxPPS API ver. 1 registered
[   43.370733] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   43.370874] ACPI: AC Adapter [ACAD] (on-line)
[   43.395335] PTP clock support registered
[   43.472134] input: PC Speaker as /devices/platform/pcspkr/input/input9
[   43.688529] tg3.c:v3.137 (May 11, 2014)
[   43.700149] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57786) rev 57766001] (PCI Express) MAC address f8:a9:63:58:a2:d8
[   43.700152] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[   43.700154] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   43.700156] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[   43.752943] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   43.752945] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   43.752946] RAPL PMU: hw unit of domain package 2^-16 Joules
[   43.752948] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   44.089200] acer_wmi: Acer Laptop ACPI-WMI Extras
[   44.089225] acer_wmi: Function bitmap for Communication Button: 0x801
[   44.092533] input: Acer WMI hotkeys as /devices/virtual/input/input11
[   44.126905] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   44.130284] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   44.212968] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   44.212975] cfg80211: failed to load regulatory.db
[   44.422505] iTCO_vendor_support: vendor-support=0
[   44.443872] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   44.443926] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[   44.444100] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   44.540077] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x454f00)
[   44.563535] psmouse serio1: elantech: Synaptics capabilities query result 0x79, 0x16, 0x0c.
[   44.584477] psmouse serio1: elantech: Elan sample query result 03, 64, 75
[   44.709592] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input10
[   44.796030] ath: phy0: WB335 2-ANT card detected
[   44.796033] ath: phy0: Set BT/WLAN RX diversity capability
[   44.804084] ath: phy0: Enable LNA combining
[   44.805328] ath: phy0: ASPM enabled: 0x42
[   44.805331] ath: EEPROM regdomain: 0x65
[   44.805331] ath: EEPROM indicates we should expect a direct regpair map
[   44.805334] ath: Country alpha2 being used: 00
[   44.805335] ath: Regpair used: 0x65
[   44.847068] intel_rapl: Found RAPL domain package
[   44.847070] intel_rapl: Found RAPL domain core
[   44.847071] intel_rapl: Found RAPL domain uncore
[   44.847078] intel_rapl: RAPL package 0 domain package locked by BIOS
[   45.461494] tg3 0000:02:00.0 enp2s0f0: renamed from eth0
[   45.489097] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   45.489636] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffa43a81500000, irq=17
[   45.683088] mousedev: PS/2 mouse device common for all mice
[   45.788171] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[   46.228235] [drm] Memory usable by graphics device = 2048M
[   46.228238] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[   46.228239] fb: switching to inteldrmfb from VESA VGA
[   46.228258] Console: switching to colour dummy device 80x25
[   46.228336] [drm] Replacing VGA console driver
[   46.234379] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   46.234381] [drm] Driver supports precise vblank timestamp query.
[   46.236936] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   46.263742] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[   46.264564] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   46.264689] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[   46.264800] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   46.321326] fbcon: inteldrmfb (fb0) is primary device
[   46.877730] Bluetooth: Core ver 2.22
[   46.877746] NET: Registered protocol family 31
[   46.877747] Bluetooth: HCI device and connection manager initialized
[   46.877750] Bluetooth: HCI socket layer initialized
[   46.877752] Bluetooth: L2CAP socket layer initialized
[   46.877757] Bluetooth: SCO socket layer initialized
[   46.886826] media: Linux media interface: v0.10
[   46.932643] usbcore: registered new interface driver btusb
[   46.939683] Linux video capture interface: v2.00
[   47.070274] usbcore: registered new interface driver ath3k
[   47.093209] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b3f6)
[   47.094653] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized!
[   47.094659] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
[   47.094663] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[   47.094879] input: HD WebCam: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
[   47.095073] usbcore: registered new interface driver uvcvideo
[   47.095074] USB Video Class driver (1.1.1)
[   47.156134] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC282: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   47.156137] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   47.156140] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   47.156141] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   47.156143] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   47.156145] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1b
[   47.206052] usb 1-1.1: USB disconnect, device number 4
[   47.378034] usb 1-1.1: new full-speed USB device number 5 using ehci-pci
[   47.381052] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   47.382371] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   47.382447] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   47.640182] Console: switching to colour frame buffer device 170x48
[   47.660716] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   50.038554] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   50.194285] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: stripe=4,data=ordered
[   52.772059] usb 1-1.1: device descriptor read/64, error -110
[   58.417807] usb 1-1.1: New USB device found, idVendor=04ca, idProduct=300b
[   58.417814] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   63.577524] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: data=ordered
[   71.835677] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready
[   72.029380] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready
[   72.293244] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   72.306783] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   72.328249] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   73.374720] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   74.365616] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   75.393437] wlp3s0: authenticate with 90:f6:52:fd:94:0c
[   75.410297] wlp3s0: send auth to 90:f6:52:fd:94:0c (try 1/3)
[   75.414274] wlp3s0: authenticated
[   75.415047] wlp3s0: associate with 90:f6:52:fd:94:0c (try 1/3)
[   75.419034] wlp3s0: RX AssocResp from 90:f6:52:fd:94:0c (capab=0x411 status=0 aid=3)
[   75.419230] wlp3s0: associated
[   75.577243] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[  107.031051] systemd-journald[332]: File /var/log/journal/80a9036dbd8c4f8eb4225d5c9518d622/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[  108.911727] fuse init (API version 7.26)
[  115.316824] rfkill: input handler disabled

Last edited by Ackio (2018-04-04 23:55:10)

Offline

#2 2018-03-03 20:23:37

lo1
Member
Registered: 2017-09-25
Posts: 580

Re: [SOLVED] Random hard freezing in Arch Linux

Can you better define what does "recently" mean? Also, can you provide logs from your journal and your pacman log?

Offline

#3 2018-03-03 20:55:49

seth
Member
Registered: 2012-09-03
Posts: 8,133

Re: [SOLVED] Random hard freezing in Arch Linux

it also freezes when I run the "man" command

https://wiki.archlinux.org/index.php/SMART

Offline

#4 2018-03-03 21:45:09

Ackio
Member
Registered: 2018-03-03
Posts: 13

Re: [SOLVED] Random hard freezing in Arch Linux

lo1 wrote:

Can you better define what does "recently" mean? Also, can you provide logs from your journal and your pacman log?

Recently == 2 days ago.

journalctl -xer
https://pastebin.com/dCUvUVtb

pacman.log
2016: https://pastebin.com/yKASHY3Q
2017: *
2018: https://pastebin.com/J5gzusrG
*I had to break the log file to be able to post in Pastebin. The 2017 logs, however, surpass the 512kb limit of Pastebin for free users.

seth wrote:
Ackio wrote:

it also freezes when I run the "man" command

https://wiki.archlinux.org/index.php/SMART

Running a short test:

# smartctl -t short /dev/sda

I got this result:

# smartctl -H /dev/sda
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.15.6-1-ARCH] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

I'll try a conveyance and a long test.

Offline

#5 2018-03-03 22:02:44

seth
Member
Registered: 2012-09-03
Posts: 8,133

Re: [SOLVED] Random hard freezing in Arch Linux

smartctl -a short /dev/sda

Offline

#6 2018-03-03 23:58:22

Ackio
Member
Registered: 2018-03-03
Posts: 13

Re: [SOLVED] Random hard freezing in Arch Linux

seth wrote:
smartctl -a short /dev/sda

Running this command returns:

smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.15.6-1-ARCH] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

ERROR: smartctl takes ONE device name as the final command-line argument.
You have provided 2 device names:
short
/dev/sda

Use smartctl -h to get a usage summary

I suppose the correct command is "smartctl -a /dev/sda". This command returns:

# smartctl -a /dev/sda
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.15.6-1-ARCH] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Samsung SpinPoint M8 (AF)
Device Model:     ST1000LM024 HN-M101MBB
Serial Number:    S33FJ5DF202404
LU WWN Device Id: 5 0004cf 4013e5e25
Firmware Version: 2BA30001
User Capacity:    1.000.204.886.016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Mar  3 20:54:45 2018 -03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 121)	The previous self-test completed having
					the read element of the test failed.
Total time to complete Offline 
data collection: 		(13140) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 219) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       777
  2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time            0x0023   092   087   025    Pre-fail  Always       -       2610
  4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       2815
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       20535
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       2777
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       281
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   060   050   000    Old_age   Always       -       40 (Min/Max 21/50)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       4
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       21449
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       92
225 Load_Cycle_Count        0x0032   039   039   000    Old_age   Always       -       624489

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure       90%     20532         433808
# 2  Short offline       Completed: read failure       90%     20532         109586664
# 3  Short offline       Completed: read failure       90%     20532         109586664

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed_read_failure [90% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Offline

#7 2018-03-04 00:31:45

loqs
Member
Registered: 2014-03-06
Posts: 5,807

Re: [SOLVED] Random hard freezing in Arch Linux

# 1  Extended offline    Completed: read failure       90%     20532         433808
# 2  Short offline       Completed: read failure       90%     20532         109586664

LBA 433808 and 109586664 were unreadable on different tests.  See https://www.smartmontools.org/wiki/BadBlockHowto I recommend you backup any data you value first and then check the commands you intend to use before using them.

Offline

#8 2018-03-04 02:18:53

amish
Member
Registered: 2014-05-10
Posts: 357

Re: [SOLVED] Random hard freezing in Arch Linux

Look at

$ hdparm --read-sector ... # first make sure sector is actually bad
$ hdparm --write-sector ...# write zeros to fix / move / mark it

Fastest way I use to fix a bad sector. Sector number can be found from logs.

And then quickly take backup.

Last edited by amish (2018-03-04 02:22:12)


Forum signature: I discuss. I put my thoughts strongly. But I definitely respect all developers and time they put in.

Offline

#9 2018-04-04 23:54:40

Ackio
Member
Registered: 2018-03-03
Posts: 13

Re: [SOLVED] Random hard freezing in Arch Linux

loqs wrote:
# 1  Extended offline    Completed: read failure       90%     20532         433808
# 2  Short offline       Completed: read failure       90%     20532         109586664

LBA 433808 and 109586664 were unreadable on different tests.  See https://www.smartmontools.org/wiki/BadBlockHowto I recommend you backup any data you value first and then check the commands you intend to use before using them.

I commited a mistake when running the badblock utility, and run it in destructive mode. I've destroyed my partition >.<". But I have made backup of import files.

Anyway, for all other users with the same problem... Your HDD is probably dying. My HDD has 16000+ badblocks when I noticed these freezes.

The easiest way to solve this is reinstall your OS, deleting all previous partitions first. The new fresh install should mark all badblocks and will not use it. But maybe for a shortly time before your HDD finally die.

Thanks everyone for all your help.

Offline

#10 2018-04-12 06:01:37

P. Boisjoli
Member
Registered: 2018-04-12
Posts: 3

Re: [SOLVED] Random hard freezing in Arch Linux

Ackio wrote:

The easiest way to solve this is reinstall your OS, deleting all previous partitions first. The new fresh install should mark all badblocks and will not use it. But maybe for a shortly time before your HDD finally die.

Don't bother! "Normal" behavior for modern HDD is to produce exponentially new bad locations if you continue using it. As a new bad locations produce contaminant that will produce new bad locations. A vicious circle.

The advise would be to get as much data you can extract before its last breath. Don't try to scan it more than required to realize it is failing, don't try to repair it by marking the bad blocks as suggested. As time pass the HDD will become more and more sluggish, then it will expire for good. I have a drive do it to me recently, I successfully extracted my data this way.

Offline

Board footer

Powered by FluxBB