wpa_supplicant not connecting

Scriptor · 2018-03-11 17:12:19

Hello,

I have a problem connecting with wpa_supplicant to my network.

I have a usb wifi card, this product.

I use the rtl8821au-dkms-git package for the driver.

# wpa_supplicant -wlp0s20f0u4 -c<(wpa_passphrase "Bbox-F0952320" "mypass") -d
wpa_supplicant v2.6
Successfully initialized wpa_supplicant
Initializing interface 'wlp0s20f0u4' conf '/dev/fd/63' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/dev/fd/63' -> '/dev/fd/63'
Reading configuration file '/dev/fd/63'
Priority group 0
   id=0 ssid='Bbox-F0952320'
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported vendor command: vendor_id=0x1018 subcmd=1
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=4106
nl80211: Supported vendor command: vendor_id=0x1a11 subcmd=4107
nl80211: Supported vendor event: vendor_id=0x1018 subcmd=0
nl80211: Supported vendor event: vendor_id=0x1018 subcmd=1
nl80211: interface wlp0s20f0u4 in phy phy0
nl80211: Set mode ifindex 3 iftype 2 (STATION)
nl80211: Subscribe to mgmt frames with non-AP handle 0x559556982840
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x559556982840 match=0104
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 01 04
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x559556982840 match=040a
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 04 0a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x559556982840 match=040b
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 04 0b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x559556982840 match=040c
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 04 0c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x559556982840 match=040d
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 04 0d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x559556982840 match=090a
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 09 0a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x559556982840 match=090b
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 09 0b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x559556982840 match=090c
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 09 0c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x559556982840 match=090d
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 09 0d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x559556982840 match=0409506f9a09
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x559556982840 match=7f506f9a09
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=5): 7f 50 6f 9a 09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x559556982840 match=0801
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 08 01
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x559556982840 match=06
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=1): 06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x559556982840 match=0a07
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 0a 07
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x559556982840 match=0a11
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 0a 11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x559556982840 match=0a1a
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 0a 1a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x559556982840 match=1101
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 11 01
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x559556982840 match=1102
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 11 02
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x559556982840 match=0505
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 05 05
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x559556982840 match=0500
nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
nl80211: Register frame match - hexdump(len=2): 05 00
nl80211: Failed to register Action frame processing - ignore for now
rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
Add interface wlp0s20f0u4 to a new radio phy0
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz 20 mBm
nl80211: 2457-2482 @ 20 MHz 20 mBm (no IR)
nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
nl80211: 57240-63720 @ 2160 MHz 0 mBm
nl80211: Added 802.11b mode based on 802.11g information
wlp0s20f0u4: Own MAC address: 00:e0:4c:e1:5b:c8
wpa_driver_nl80211_set_key: ifindex=3 (wlp0s20f0u4) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp0s20f0u4) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp0s20f0u4) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp0s20f0u4) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp0s20f0u4) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=3 (wlp0s20f0u4) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0
wlp0s20f0u4: RSN: flushing PMKID list in the driver
nl80211: Flush PMKIDs
wlp0s20f0u4: Setting scan request: 0.100000 sec
TDLS: TDLS operation not supported by driver
TDLS: Driver uses internal link setup
TDLS: Driver does not support TDLS channel switching
wlp0s20f0u4: WPS: UUID based on MAC address: 333ebf28-5ed0-53fa-8e56-b15cda402d8d
ENGINE: Loading dynamic engine
ENGINE: Loading dynamic engine
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Skip set_supp_port(unauthorized) while not associated
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
P2P: Add operating class 81
P2P: Channels - hexdump(len=13): 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d
P2P: Add operating class 115
P2P: Channels - hexdump(len=4): 24 28 2c 30
P2P: Add operating class 116
P2P: Channels - hexdump(len=2): 24 2c
P2P: Add operating class 117
P2P: Channels - hexdump(len=2): 28 30
P2P: Add operating class 124
P2P: Channels - hexdump(len=4): 95 99 9d a1
P2P: Add operating class 125
P2P: Channels - hexdump(len=6): 95 99 9d a1 a5 a9
P2P: Add operating class 126
P2P: Channels - hexdump(len=2): 95 9d
P2P: Add operating class 127
P2P: Channels - hexdump(len=2): 99 a1
P2P: Add operating class 128
P2P: Channels - hexdump(len=4): 24 28 2c 30
P2P: Add operating class 130
P2P: Channels - hexdump(len=20): 24 28 2c 30 34 38 3c 40 64 68 6c 70 74 78 7c 80 84 88 8c 90
P2P: Own listen channel: 81:6
P2P: Random operating channel: 81:1
P2P: initialized
P2P: channels: 81:1,2,3,4,5,6,7,8,9,10,11,12,13 115:36,40,44,48 116:36,44 117:40,48 124:149,153,157,161 125:149,153,157,161,165,169 126:149,157 127:153,161 128:36,40,44,48 130:36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144
P2P: cli_channels:
wlp0s20f0u4: Added interface wlp0s20f0u4
wlp0s20f0u4: State: DISCONNECTED -> DISCONNECTED
nl80211: Set wlp0s20f0u4 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
RTM_NEWLINK: ifi_index=3 ifname=wlp0s20f0u4 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP])
wlp0s20f0u4: State: DISCONNECTED -> SCANNING
wlp0s20f0u4: Determining shared radio frequencies (max len 1)
wlp0s20f0u4: Shared frequencies (len=0): completed iteration
P2P: Add operating class 81
P2P: Channels - hexdump(len=13): 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d
P2P: Add operating class 115
P2P: Channels - hexdump(len=4): 24 28 2c 30
P2P: Add operating class 116
P2P: Channels - hexdump(len=2): 24 2c
P2P: Add operating class 117
P2P: Channels - hexdump(len=2): 28 30
P2P: Add operating class 124
P2P: Channels - hexdump(len=4): 95 99 9d a1
P2P: Add operating class 125
P2P: Channels - hexdump(len=6): 95 99 9d a1 a5 a9
P2P: Add operating class 126
P2P: Channels - hexdump(len=2): 95 9d
P2P: Add operating class 127
P2P: Channels - hexdump(len=2): 99 a1
P2P: Add operating class 128
P2P: Channels - hexdump(len=4): 24 28 2c 30
P2P: Add operating class 130
P2P: Channels - hexdump(len=20): 24 28 2c 30 34 38 3c 40 64 68 6c 70 74 78 7c 80 84 88 8c 90
P2P: Update channel list
P2P: channels: 81:1,2,3,4,5,6,7,8,9,10,11,12,13 115:36,40,44,48 116:36,44 117:40,48 124:149,153,157,161 125:149,153,157,161,165,169 126:149,157 127:153,161 128:36,40,44,48 130:36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144
P2P: cli_channels:
wlp0s20f0u4: Starting AP scan for wildcard SSID
WPS: Building WPS IE for Probe Request
WPS:  * Version (hardcoded 0x10)
WPS:  * Request Type
WPS:  * Config Methods (3148)
WPS:  * UUID-E
WPS:  * Primary Device Type
WPS:  * RF Bands (3)
WPS:  * Association State
WPS:  * Configuration Error (0)
WPS:  * Device Password ID (0)
WPS:  * Manufacturer
WPS:  * Model Name
WPS:  * Model Number
WPS:  * Device Name
WPS:  * Version2 (0x20)
P2P: * P2P IE header
P2P: * Capability dev=21 group=00
P2P: * Listen Channel: Regulatory Class 81 Channel 6
wlp0s20f0u4: Add radio work 'scan'@0x5595569a76f0
wlp0s20f0u4: First radio work item in the queue - schedule start immediately
wlp0s20f0u4: Starting radio work 'scan'@0x5595569a76f0 after 0.000020 second wait
wlp0s20f0u4: nl80211: scan request
nl80211: Scan trigger failed: ret=-16 (Device or resource busy)
wlp0s20f0u4: State: SCANNING -> DISCONNECTED
nl80211: Set wlp0s20f0u4 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlp0s20f0u4: Determining shared radio frequencies (max len 1)
wlp0s20f0u4: Shared frequencies (len=0): completed iteration
P2P: Add operating class 81
P2P: Channels - hexdump(len=13): 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d
P2P: Add operating class 115
P2P: Channels - hexdump(len=4): 24 28 2c 30
P2P: Add operating class 116
P2P: Channels - hexdump(len=2): 24 2c
P2P: Add operating class 117
P2P: Channels - hexdump(len=2): 28 30
P2P: Add operating class 124
P2P: Channels - hexdump(len=4): 95 99 9d a1
P2P: Add operating class 125
P2P: Channels - hexdump(len=6): 95 99 9d a1 a5 a9
P2P: Add operating class 126
P2P: Channels - hexdump(len=2): 95 9d
P2P: Add operating class 127
P2P: Channels - hexdump(len=2): 99 a1
P2P: Add operating class 128
P2P: Channels - hexdump(len=4): 24 28 2c 30
P2P: Add operating class 130
P2P: Channels - hexdump(len=20): 24 28 2c 30 34 38 3c 40 64 68 6c 70 74 78 7c 80 84 88 8c 90
P2P: Update channel list
P2P: channels: 81:1,2,3,4,5,6,7,8,9,10,11,12,13 115:36,40,44,48 116:36,44 117:40,48 124:149,153,157,161 125:149,153,157,161,165,169 126:149,157 127:153,161 128:36,40,44,48 130:36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144
P2P: cli_channels:
wlp0s20f0u4: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1
wlp0s20f0u4: Radio work 'scan'@0x5595569a76f0 done in 0.000378 seconds
wlp0s20f0u4: radio_work_free('scan'@0x5595569a76f0: num_active_works --> 0
wlp0s20f0u4: Setting scan request: 1.000000 sec
EAPOL: disable timer tick
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wlp0s20f0u4: WPA: Clear old PMK and PTK
wlp0s20f0u4: BSS: Remove id 0 BSSID d0:84:b0:02:9d:b4 SSID 'Bbox-F0952320-5GHz' due to wpa_bss_flush
wlp0s20f0u4: BSS: Remove id 1 BSSID d0:84:b0:02:9d:b0 SSID 'Bbox-F0952320' due to wpa_bss_flush
wlp0s20f0u4: BSS: Remove id 4 BSSID 82:25:15:2b:a6:bb SSID 'SFR WiFi Mobile' due to wpa_bss_flush
wlp0s20f0u4: BSS: Remove id 2 BSSID 00:25:15:2b:a6:b8 SSID 'NEUF_A6B4' due to wpa_bss_flush
wlp0s20f0u4: BSS: Remove id 3 BSSID 96:fe:f4:9e:85:20 SSID 'Bbox-9E8520' due to wpa_bss_flush
wlp0s20f0u4: BSS: Remove id 5 BSSID 48:83:c7:25:76:80 SSID 'Livebox-7680' due to wpa_bss_flush
wlp0s20f0u4: BSS: Remove id 7 BSSID b0:b2:8f:8f:0d:80 SSID 'Livebox-0D80' due to wpa_bss_flush
wlp0s20f0u4: BSS: Remove id 8 BSSID 82:25:15:2b:a6:b9 SSID 'SFR WiFi FON' due to wpa_bss_flush
wlp0s20f0u4: BSS: Remove id 10 BSSID 9a:26:6c:4e:3b:76 SSID 'orange' due to wpa_bss_flush
wlp0s20f0u4: BSS: Remove id 9 BSSID b0:b2:8f:8f:0d:81 SSID 'orange' due to wpa_bss_flush
wlp0s20f0u4: Cancelling scan request
wlp0s20f0u4: Cancelling authentication timeout
Off-channel: Clear pending Action frame TX (pending_action_tx=(nil)
nl80211: Data frame filter flags=0x0
HS20: Delete all stored icons
wlp0s20f0u4: P2P: Disable P2P since removing the management interface is being removed
P2P: All ASP advertisements flushed
P2P: Disabling Extended Listen Timing
P2P: Stopping find
P2P: Clear timeout (state=IDLE)
P2P: State IDLE -> IDLE
P2P: All ASP advertisements flushed
Remove interface wlp0s20f0u4 from radio phy0
wlp0s20f0u4: Remove radio work 'scan'@0x5595569b23c0
Remove radio phy0
nl80211: deinit ifname=wlp0s20f0u4 disabled_11b_rates=0
nl80211: Remove monitor interface: refcount=0
netlink: Operstate: ifindex=3 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP)
nl80211: Set mode ifindex 3 iftype 2 (STATION)
nl80211: Unsubscribe mgmt frames handle 0x8888dd1dde10a0c9 (mode change)
wlp0s20f0u4: CTRL-EVENT-TERMINATING

# systemctl status wpa_supplicant
● wpa_supplicant.service - WPA supplicant
   Loaded: loaded (/usr/lib/systemd/system/wpa_supplicant.service; disabled; vendor preset: disabled)
   Active: inactive (dead)

Mar 11 15:45:51 Host-001 wpa_supplicant[3460]: wlp0s20f0u4: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
Mar 11 15:45:54 Host-001 wpa_supplicant[3460]: wlp0s20f0u4: CTRL-EVENT-SCAN-FAILED ret=-16
Mar 11 15:45:58 Host-001 wpa_supplicant[3460]: wlp0s20f0u4: CTRL-EVENT-SCAN-FAILED ret=-16
Mar 11 15:47:31 Host-001 wpa_supplicant[3460]: wlp0s20f0u4: No network configuration found for the current AP
Mar 11 15:47:31 Host-001 wpa_supplicant[3460]: wlp0s20f0u4: CTRL-EVENT-DISCONNECTED bssid=d0:84:b0:02:9d:b0 reason=3 locally_generated=1
Mar 11 15:47:31 Host-001 wpa_supplicant[3460]: wlp0s20f0u4: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
Mar 11 15:47:35 Host-001 wpa_supplicant[3460]: wlp0s20f0u4: CTRL-EVENT-SCAN-FAILED ret=-16
Mar 11 15:50:17 Host-001 wpa_supplicant[3460]: nl80211: deinit ifname=wlp0s20f0u4 disabled_11b_rates=0
Mar 11 15:51:51 Host-001 systemd[1]: Stopping WPA supplicant...
Mar 11 15:51:51 Host-001 systemd[1]: Stopped WPA supplicant.

# iw wlp0s20f0u4 info
Interface wlp0s20f0u4
	ifindex 3
	wdev 0x1
	addr 00:e0:4c:e1:5b:c8
	type managed
	wiphy 0
	channel 1 (2412 MHz), width: 20 MHz, center1: 2412 MHz
	txpower 12.00 dBm

# rfkill list
0: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no

# wlp0s20f0u4
3: wlp0s20f0u4: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:e0:4c:e1:5b:c8 brd ff:ff:ff:ff:ff:ff

Thank you very much in advance.

boojum · 2018-03-11 17:29:59

Scriptor wrote:

# wpa_supplicant -wlp0s20f0u4 -c<(wpa_passphrase "Bbox-F0952320" "mypass") -d

Try:

wpa_supplicant -B -i wlp0s20f0u4 -c <(wpa_passphrase Bbox-F0952320 mypass)

Scriptor · 2018-03-11 17:38:53

Thank you for your quick reponse.

boojum wrote:

Scriptor wrote:

# wpa_supplicant -wlp0s20f0u4 -c<(wpa_passphrase "Bbox-F0952320" "mypass") -d

Try:

wpa_supplicant -B -i wlp0s20f0u4 -c <(wpa_passphrase Bbox-F0952320 mypass)

This is what the command returned

Successfully initialized wpa_supplicant
wlp0s20f0u4: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1
wlp0s20f0u4: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1
wlp0s20f0u4: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1
wlp0s20f0u4: Trying to associate with d0:84:b0:02:9d:b0 (SSID='Bbox-F0952320' freq=2412 MHz)
wlp0s20f0u4: Associated with d0:84:b0:02:9d:b0
wlp0s20f0u4: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
wlp0s20f0u4: CTRL-EVENT-DISCONNECTED bssid=d0:84:b0:02:9d:b0 reason=0 locally_generated=1
wlp0s20f0u4: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1
wlp0s20f0u4: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1
wlp0s20f0u4: Trying to associate with d0:84:b0:02:9d:b0 (SSID='Bbox-F0952320' freq=2412 MHz)
wlp0s20f0u4: Associated with d0:84:b0:02:9d:b0
wlp0s20f0u4: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
wlp0s20f0u4: CTRL-EVENT-DISCONNECTED bssid=d0:84:b0:02:9d:b0 reason=0 locally_generated=1
wlp0s20f0u4: Trying to associate with d0:84:b0:02:9d:b0 (SSID='Bbox-F0952320' freq=2412 MHz)
wlp0s20f0u4: Associated with d0:84:b0:02:9d:b0
wlp0s20f0u4: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
wlp0s20f0u4: CTRL-EVENT-DISCONNECTED bssid=d0:84:b0:02:9d:b0 reason=0 locally_generated=1
wlp0s20f0u4: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1
wlp0s20f0u4: Trying to associate with d0:84:b0:02:9d:b0 (SSID='Bbox-F0952320' freq=2412 MHz)
wlp0s20f0u4: Associated with d0:84:b0:02:9d:b0
wlp0s20f0u4: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
wlp0s20f0u4: CTRL-EVENT-DISCONNECTED bssid=d0:84:b0:02:9d:b0 reason=0 locally_generated=1
wlp0s20f0u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Bbox-F0952320" auth_failures=1 duration=10 reason=CONN_FAILED
wlp0s20f0u4: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1
wlp0s20f0u4: CTRL-EVENT-SSID-REENABLED id=0 ssid="Bbox-F0952320"
wlp0s20f0u4: Trying to associate with d0:84:b0:02:9d:b0 (SSID='Bbox-F0952320' freq=2412 MHz)
wlp0s20f0u4: Associated with d0:84:b0:02:9d:b0
wlp0s20f0u4: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
wlp0s20f0u4: CTRL-EVENT-DISCONNECTED bssid=d0:84:b0:02:9d:b0 reason=0 locally_generated=1
wlp0s20f0u4: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Bbox-F0952320" auth_failures=2 duration=23 reason=CONN_FAILED
wlp0s20f0u4: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1
wlp0s20f0u4: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1
wlp0s20f0u4: CTRL-EVENT-DISCONNECTED bssid=d0:84:b0:02:9d:b0 reason=3 locally_generated=1
wlp0s20f0u4: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
wlp0s20f0u4: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1
wlp0s20f0u4: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1
wlp0s20f0u4: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1
nl80211: deinit ifname=wlp0s20f0u4 disabled_11b_rates=0
wlp0s20f0u4: CTRL-EVENT-TERMINATING

Thank you very much in advance.

Arch Linux

#1 2018-03-11 17:12:19

wpa_supplicant not connecting

#2 2018-03-11 17:29:59

Re: wpa_supplicant not connecting

#3 2018-03-11 17:38:53

Re: wpa_supplicant not connecting

Board footer