Arch Linux

archlinuxforever

Member

Registered: 2015-06-18

Posts: 93

Incorrect GRUB entry with linux-lts

I installed linux-lts in other computer x86_64 and now I have two issues:

- The default linux is linux-lts and I tried to save
  GRUB_DEFAULT=gnulinux-linux-advanced-3c16551e-47d8-4720-8515-e6470c688977 in /etc/default/grub
  and sudo grub-mkconfig -o /boot/grub/grub.cfg but does not work.
  Also I tried to save GRUB_SAVEDEFAULT="true" and GRUB_DEFAULT=saved in /etc/default/grub and after grub-mkconfig but doesn't work neither.

- I get this error in both versions: "[FAILED] Failed to start Load Kernel Modules."

I want to have two versions in grub menu and the default the last linux kernel.

This is the boot process with linux-lts:

starting version 237
/dev/mapper/VolGroup00-lv_root: clean, 1109130/55056384 files, 103454387/2430074
[FAILED] Failed to start Load Kernel Modules.
See 'systemctl status systemd-modules-load.service' for details.
[  OK  ] Started LVM2 metadata daemon.
         Starting Apply Kernel Variables...
         Mounting Kernel Configuration File System...
[  OK  ] Mounted Kernel Configuration File System.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Started udev Kernel Device Manager.
         Starting Network Service...
[  OK  ] Created slice system-lvm2\x2dpvscan.slice.
         Starting LVM2 PV scan on device 8:18...
         Starting LVM2 PV scan on device 8:2...
         Starting Load Kernel Modules...
[FAILED] Failed to start Load Kernel Modules.
See 'systemctl status systemd-modules-load.service' for details.
[  OK  ] Found device WDC_WD10EZEX-00BN5A0 1.
[   14.470130] kfd kfd: kgd2kfd_probe failed
[  OK  ] Found device /dev/mapper/VolGroup00-lv_swap.
         Activating swap /dev/mapper/VolGroup00-lv_swap...
[  OK  ] Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[  OK  ] Reached target Local File Systems (Pre).
         Starting File System Check on /dev/sda1...
[  OK  ] Activated swap /dev/mapper/VolGroup00-lv_swap.
[  OK  ] Reached target Swap.
         Mounting Temporary Directory (/tmp)...
[  OK  ] Mounted Temporary Directory (/tmp).
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Started LVM2 PV scan on device 8:18.
[  OK  ] Started File System Check on /dev/sda1.
         Mounting /boot...
[  OK  ] Mounted /boot.
[  OK  ] Reached target Local File Systems.
         Starting Create Volatile Files and Directories...
[  OK  ] Started Create Volatile Files and Directories.
         Starting Network Time Synchronization...
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Started Network Service.
[  OK  ] Started LVM2 PV scan on device 8:2.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Listening on sshd.socket.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Started CUPS Scheduler.
[  OK  ] Reached target Paths.
[  OK  ] Listening on CUPS Scheduler.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting Save/Restore Sound Card State...
[  OK  ] Started D-Bus System Message Bus.
         Starting update-wake-on-lan.service...
         Starting Virtual console mouse server...
         Starting Login Service...
         Starting Network Manager...
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Daily man-db cache update.
[  OK  ] Started Daily rotation of log files.
[  OK  ] Started Daily verification of password and group files.
...

This is the command systemctl:

$ sudo systemctl status systemd-modules-load.service

● systemd-modules-load.service - Load Kernel Modules
   Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static; vendor preset: disabled)
   Active: failed (Result: exit-code) since Sat 2018-04-28 13:09:29 CEST; 1min 24s ago
     Docs: man:systemd-modules-load.service(8)
           man:modules-load.d(5)
  Process: 352 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
 Main PID: 352 (code=exited, status=1/FAILURE)

abr 28 13:09:29 minitorre systemd[1]: Starting Load Kernel Modules...
abr 28 13:09:29 minitorre systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
abr 28 13:09:29 minitorre systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
abr 28 13:09:29 minitorre systemd[1]: Failed to start Load Kernel Modules.

The system works fine and GNOME works too in both versions. This is the output from lsmod:

$ uname -r
4.14.36-1-lts

$ lsmod
Module                  Size  Used by
fuse                  118784  2
amdkfd                147456  1
mousedev               24576  0
amd_iommu_v2           20480  1 amdkfd
radeon               1650688  4
gpio_ich               16384  0
iTCO_wdt               16384  0
iTCO_vendor_support    16384  1 iTCO_wdt
i2c_algo_bit           16384  1 radeon
ttm                   114688  1 radeon
ppdev                  20480  0
snd_hda_codec_analog    20480  1
evdev                  24576  7
pcspkr                 16384  0
snd_hda_codec_generic    86016  1 snd_hda_codec_analog
drm_kms_helper        192512  1 radeon
input_leds             16384  0
drm                   438272  7 radeon,ttm,drm_kms_helper
led_class              16384  1 input_leds
mac_hid                16384  0
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
snd_hda_intel          45056  3
i2c_i801               28672  0
snd_hda_codec         151552  3 snd_hda_intel,snd_hda_codec_analog,snd_hda_codec_generic
lpc_ich                28672  0
r8169                  94208  0
snd_hda_core           90112  4 snd_hda_intel,snd_hda_codec,snd_hda_codec_analog,snd_hda_codec_generic
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               118784  3 snd_hda_intel,snd_hda_codec,snd_hda_core
mii                    16384  1 r8169
snd_timer              36864  1 snd_pcm
snd                    90112  13 snd_hda_intel,snd_hwdep,snd_hda_codec,snd_hda_codec_analog,snd_timer,snd_hda_codec_generic,snd_pcm
soundcore              16384  1 snd
parport_pc             32768  0
intel_agp              24576  0
asus_atk0110           24576  0
intel_gtt              24576  1 intel_agp
parport                57344  2 parport_pc,ppdev
agpgart                49152  4 intel_agp,intel_gtt,ttm,drm
button                 16384  0
shpchp                 40960  0
acpi_cpufreq           24576  0
sch_fq_codel           20480  2
sg                     40960  0
crypto_user            16384  0
ip_tables              28672  0
x_tables               45056  1 ip_tables
crc32c_generic         16384  2
ext4                  716800  2
crc16                  16384  1 ext4
mbcache                16384  1 ext4
jbd2                  118784  1 ext4
fscrypto               32768  1 ext4
dm_mod                143360  12
sr_mod                 28672  0
cdrom                  69632  1 sr_mod
sd_mod                 61440  5
hid_generic            16384  0
usbhid                 57344  0
hid                   131072  2 hid_generic,usbhid
ata_generic            16384  0
pata_acpi              16384  0
serio_raw              16384  0
atkbd                  32768  0
libps2                 16384  1 atkbd
uhci_hcd               49152  0
ahci                   40960  0
libahci                40960  1 ahci
pata_jmicron           16384  0
ata_piix               36864  3
libata                274432  6 ahci,ata_piix,libahci,pata_jmicron,ata_generic,pata_acpi
ehci_pci               16384  0
ehci_hcd               94208  1 ehci_pci
scsi_mod              204800  4 sd_mod,libata,sr_mod,sg
usbcore               286720  4 usbhid,ehci_hcd,uhci_hcd,ehci_pci
usb_common             16384  1 usbcore
i8042                  32768  0
serio                  28672  4 serio_raw,atkbd,i8042

Last edited by archlinuxforever (2018-04-28 11:58:26)

archlinuxforever

Member

Registered: 2015-06-18

Posts: 93

Re: Incorrect GRUB entry with linux-lts

I solved the issue about the error: "[FAILED] Failed to start Load Kernel Modules." upgrading the system with the command:

$ sudo pacman -Syu

And install headers for linux-lts:

$ sudo pacman -S linux-lts-headers

The other issue was solved after upgrading the system. The problem was that after install with pacman -S linux-lts I installed pacman -S linux thinking that it will install by default. Because I didn't install linux-headers of that new version the boot process returned that error.

Removing the changes in /etc/default/grub and executing again the command

$ sudo grub-mkconfig -o /boot/grub/grub.cfg

causes the issue come back.

I tried also with GRUB_DEFAULT=3 (that is the position of menuentry 'Arch Linux, con Linux linux') but don't solve the issue.

Can someone help me to solve this issue, please?

Last edited by archlinuxforever (2018-04-28 14:51:15)

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 25,435

Re: Incorrect GRUB entry with linux-lts

Don't hijack unrelated threads with your own issues https://wiki.archlinux.org/index.php/Co … _hijacking

Post your entire current GRUB config, FWIW both the one you edit and the generated end result 

Split off of: https://bbs.archlinux.org/viewtopic.php?id=230714

archlinuxforever

Member

Registered: 2015-06-18

Posts: 93

Re: Incorrect GRUB entry with linux-lts

Sorry. I was following the mention of install linux-lts.

This is /etc/default/grub

GRUB_DEFAULT=3
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
#GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX_DEFAULT="resume=/dev/mapper/VolGroup00-lv_swap pci=nocrs fbcon=scrollback:1024k quiet"
GRUB_CMDLINE_LINUX=""

# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"

# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true

# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console

# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto

# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep

# Uncomment if you want GRUB to pass to the Linux kernel the old parameter 
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx" 
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=false

# Uncomment and set to the desired menu colors.  Used by normal and wallpaper 
# modes only.  Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"

# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"

# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
#
#GRUB_SAVEDEFAULT="true"

This is /boot/grub/grub.cfg generated with the comand

$ sudo grub-mkconfig -o /boot/grub/grub.cfg

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="3"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod lvm
insmod ext2
set root='lvmid/moMLDA-NChV-ZcUj-9QLO-afJ5-QEe3-HBnq6R/hs4bYz-m7wv-R3bj-Ezmm-1sJD-e3wo-DUvCgw'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint='lvmid/moMLDA-NChV-ZcUj-9QLO-afJ5-QEe3-HBnq6R/hs4bYz-m7wv-R3bj-Ezmm-1sJD-e3wo-DUvCgw'  3c16551e-47d8-4720-8515-e6470c688977
else
  search --no-floppy --fs-uuid --set=root 3c16551e-47d8-4720-8515-e6470c688977
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=es_ES
  insmod gettext
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
  set timeout_style=menu
  set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
  set timeout=5
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-3c16551e-47d8-4720-8515-e6470c688977' {
	load_video
	set gfxpayload=keep
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,msdos1' --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  9c895cf1-87c6-4138-96eb-ed09db135a44
	else
	  search --no-floppy --fs-uuid --set=root 9c895cf1-87c6-4138-96eb-ed09db135a44
	fi
	echo	'Cargando Linux linux-lts...'
	linux	/vmlinuz-linux-lts root=/dev/mapper/VolGroup00-lv_root rw  resume=/dev/mapper/VolGroup00-lv_swap pci=nocrs fbcon=scrollback:1024k quiet
	echo	'Cargando imagen de memoria inicial...'
	initrd	/initramfs-linux-lts.img
}
submenu 'Opciones avanzadas para Arch Linux' $menuentry_id_option 'gnulinux-advanced-3c16551e-47d8-4720-8515-e6470c688977' {
	menuentry 'Arch Linux, con Linux linux-lts' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-lts-advanced-3c16551e-47d8-4720-8515-e6470c688977' {
		load_video
		set gfxpayload=keep
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,msdos1' --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  9c895cf1-87c6-4138-96eb-ed09db135a44
		else
		  search --no-floppy --fs-uuid --set=root 9c895cf1-87c6-4138-96eb-ed09db135a44
		fi
		echo	'Cargando Linux linux-lts...'
		linux	/vmlinuz-linux-lts root=/dev/mapper/VolGroup00-lv_root rw  resume=/dev/mapper/VolGroup00-lv_swap pci=nocrs fbcon=scrollback:1024k quiet
		echo	'Cargando imagen de memoria inicial...'
		initrd	/initramfs-linux-lts.img
	}
	menuentry 'Arch Linux, with Linux linux-lts (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-lts-fallback-3c16551e-47d8-4720-8515-e6470c688977' {
		load_video
		set gfxpayload=keep
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,msdos1' --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  9c895cf1-87c6-4138-96eb-ed09db135a44
		else
		  search --no-floppy --fs-uuid --set=root 9c895cf1-87c6-4138-96eb-ed09db135a44
		fi
		echo	'Cargando Linux linux-lts...'
		linux	/vmlinuz-linux-lts root=/dev/mapper/VolGroup00-lv_root rw  resume=/dev/mapper/VolGroup00-lv_swap pci=nocrs fbcon=scrollback:1024k quiet
		echo	'Cargando imagen de memoria inicial...'
		initrd	/initramfs-linux-lts-fallback.img
	}
	menuentry 'Arch Linux, con Linux linux-lts (modo de recuperación)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-lts-recovery-3c16551e-47d8-4720-8515-e6470c688977' {
		load_video
		set gfxpayload=keep
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,msdos1' --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  9c895cf1-87c6-4138-96eb-ed09db135a44
		else
		  search --no-floppy --fs-uuid --set=root 9c895cf1-87c6-4138-96eb-ed09db135a44
		fi
		echo	'Cargando Linux linux-lts...'
		linux	/vmlinuz-linux-lts root=/dev/mapper/VolGroup00-lv_root rw single 
		echo	'Cargando imagen de memoria inicial...'
		initrd	/initramfs-linux-lts-fallback.img
	}
	menuentry 'Arch Linux, con Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-3c16551e-47d8-4720-8515-e6470c688977' {
		load_video
		set gfxpayload=keep
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,msdos1' --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  9c895cf1-87c6-4138-96eb-ed09db135a44
		else
		  search --no-floppy --fs-uuid --set=root 9c895cf1-87c6-4138-96eb-ed09db135a44
		fi
		echo	'Cargando Linux linux...'
		linux	/vmlinuz-linux root=/dev/mapper/VolGroup00-lv_root rw  resume=/dev/mapper/VolGroup00-lv_swap pci=nocrs fbcon=scrollback:1024k quiet
		echo	'Cargando imagen de memoria inicial...'
		initrd	/initramfs-linux.img
	}
	menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-3c16551e-47d8-4720-8515-e6470c688977' {
		load_video
		set gfxpayload=keep
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,msdos1' --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  9c895cf1-87c6-4138-96eb-ed09db135a44
		else
		  search --no-floppy --fs-uuid --set=root 9c895cf1-87c6-4138-96eb-ed09db135a44
		fi
		echo	'Cargando Linux linux...'
		linux	/vmlinuz-linux root=/dev/mapper/VolGroup00-lv_root rw  resume=/dev/mapper/VolGroup00-lv_swap pci=nocrs fbcon=scrollback:1024k quiet
		echo	'Cargando imagen de memoria inicial...'
		initrd	/initramfs-linux-fallback.img
	}
	menuentry 'Arch Linux, con Linux linux (modo de recuperación)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-recovery-3c16551e-47d8-4720-8515-e6470c688977' {
		load_video
		set gfxpayload=keep
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-ieee1275='ieee1275//disk@0,msdos1' --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  9c895cf1-87c6-4138-96eb-ed09db135a44
		else
		  search --no-floppy --fs-uuid --set=root 9c895cf1-87c6-4138-96eb-ed09db135a44
		fi
		echo	'Cargando Linux linux...'
		linux	/vmlinuz-linux root=/dev/mapper/VolGroup00-lv_root rw single 
		echo	'Cargando imagen de memoria inicial...'
		initrd	/initramfs-linux-fallback.img
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

### BEGIN /etc/grub.d/60_memtest86+ ###
if [ "${grub_platform}" == "pc" ]; then
    menuentry "Memory Tester (memtest86+)" --class memtest86 --class gnu --class tool {
        search --fs-uuid --no-floppy --set=root --hint-ieee1275='ieee1275//disk@0,msdos1' --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  9c895cf1-87c6-4138-96eb-ed09db135a44
        linux16 /memtest86+/memtest.bin 
    }
fi
### END /etc/grub.d/60_memtest86+ ###