You are not logged in.
Pages: 1
xorg fails after a full pacman and yaourt upgrade.
Xorg.0.log:
[ 109.745]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 109.746] X Protocol Version 11, Revision 0
[ 109.746] Build Operating System: Linux 4.15.6-1-ARCH x86_64
[ 109.746] Current Operating System: Linux x230 4.16.3-1-ARCH #1 SMP PREEMPT Thu Apr 19 09:17:56 UTC 2018 x86_64
[ 109.746] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c42b4e60-8c84-48ea-af3b-f68e9184728e rw "acpi_osi=!Windows 2012" quiet
[ 109.747] Build Date: 12 April 2018 05:31:07AM
[ 109.748]
[ 109.748] Current version of pixman: 0.34.0
[ 109.749] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 109.749] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 109.751] (==) Log file: "/home/richard/.local/share/xorg/Xorg.0.log", Time: Sat May 12 08:19:06 2018
[ 109.756] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 109.756] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 109.757] (==) No Layout section. Using the first Screen section.
[ 109.757] (==) No screen section available. Using defaults.
[ 109.757] (**) |-->Screen "Default Screen Section" (0)
[ 109.757] (**) | |-->Monitor "<default monitor>"
[ 109.758] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 109.758] (==) Automatically adding devices
[ 109.758] (==) Automatically enabling devices
[ 109.758] (==) Automatically adding GPU devices
[ 109.758] (==) Automatically binding GPU devices
[ 109.758] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 109.761] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 109.761] Entry deleted from font path.
[ 109.761] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 109.761] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 109.761] Entry deleted from font path.
[ 109.761] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 109.761] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 109.761] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 109.761] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 109.761] (II) Loader magic: 0x5594020bcd60
[ 109.761] (II) Module ABI versions:
[ 109.761] X.Org ANSI C Emulation: 0.4
[ 109.761] X.Org Video Driver: 23.0
[ 109.761] X.Org XInput driver : 24.1
[ 109.761] X.Org Server Extension : 10.0
[ 109.761] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.NoServer (Failed to connect to socket /run/dbus/system_bus_socket: Connection refused)
[ 109.761] (++) using VT number 1
[ 109.762] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 109.764] (--) PCI:*(0:0:2:0) 8086:0166:17aa:21fa rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
[ 109.764] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 109.764] (II) LoadModule: "glx"
[ 109.764] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 109.774] (II) Module glx: vendor="X.Org Foundation"
[ 109.774] compiled for 1.19.6, module version = 1.0.0
[ 109.774] ABI class: X.Org Server Extension, version 10.0
[ 109.774] (==) Matched intel as autoconfigured driver 0
[ 109.774] (==) Matched modesetting as autoconfigured driver 1
[ 109.774] (==) Matched fbdev as autoconfigured driver 2
[ 109.774] (==) Matched vesa as autoconfigured driver 3
[ 109.774] (==) Assigned the driver to the xf86ConfigLayout
[ 109.774] (II) LoadModule: "intel"
[ 109.775] (WW) Warning, couldn't open module intel
[ 109.775] (II) UnloadModule: "intel"
[ 109.775] (II) Unloading intel
[ 109.775] (EE) Failed to load module "intel" (module does not exist, 0)
[ 109.775] (II) LoadModule: "modesetting"
[ 109.775] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 109.776] (II) Module modesetting: vendor="X.Org Foundation"
[ 109.776] compiled for 1.19.6, module version = 1.19.6
[ 109.776] Module class: X.Org Video Driver
[ 109.776] ABI class: X.Org Video Driver, version 23.0
[ 109.776] (II) LoadModule: "fbdev"
[ 109.777] (WW) Warning, couldn't open module fbdev
[ 109.777] (II) UnloadModule: "fbdev"
[ 109.777] (II) Unloading fbdev
[ 109.777] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 109.777] (II) LoadModule: "vesa"
[ 109.777] (WW) Warning, couldn't open module vesa
[ 109.777] (II) UnloadModule: "vesa"
[ 109.777] (II) Unloading vesa
[ 109.777] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 109.777] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 109.777] (EE) open /dev/dri/card0: Permission denied
[ 109.777] (WW) Falling back to old probe method for modesetting
[ 109.777] (EE) open /dev/dri/card0: Permission denied
[ 109.777] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 109.777] (EE) Screen 0 deleted because of no matching config section.
[ 109.777] (II) UnloadModule: "modesetting"
[ 109.777] (EE) Device(s) detected, but none match those in the config file.
[ 109.777] (EE)
Fatal server error:
[ 109.777] (EE) no screens found(EE)
[ 109.777] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 109.777] (EE) Please also check the log file at "/home/richard/.local/share/xorg/Xorg.0.log" for additional information.
[ 109.777] (EE)
[ 109.820] (EE) Server terminated with error (1). Closing log file.
I can get to a command line but appear now to have no wifi access, which might complicate fixing this? 'nmcli dev wifi' gives:
Error: Could not create NMClient object: Could not connect: Connection refused.
For completeness, output from dmesg:
[ 0.000000] Linux version 4.16.3-1-ARCH (builduser@heftig-2067) (gcc version 7.3.1 20180406 (GCC)) #1 SMP PREEMPT Thu Apr 19 09:17:56 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c42b4e60-8c84-48ea-af3b-f68e9184728e rw "acpi_osi=!Windows 2012" quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000cec30fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cec31000-0x00000000dae9efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e5fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000041e600000-0x000000041effffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 2325AS6/2325AS6, BIOS G2ETA5WW (2.65 ) 09/17/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 6 base 100000000 mask F00000000 write-back
[ 0.000000] 7 base 200000000 mask E00000000 write-back
[ 0.000000] 8 base 400000000 mask FE0000000 write-back
[ 0.000000] 9 base 41F000000 mask FFF000000 uncachable
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0xcec31 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576
[ 0.000000] BRK [0x1dc64a000, 0x1dc64afff] PGTABLE
[ 0.000000] BRK [0x1dc64b000, 0x1dc64bfff] PGTABLE
[ 0.000000] BRK [0x1dc64c000, 0x1dc64cfff] PGTABLE
[ 0.000000] BRK [0x1dc64d000, 0x1dc64dfff] PGTABLE
[ 0.000000] BRK [0x1dc64e000, 0x1dc64efff] PGTABLE
[ 0.000000] BRK [0x1dc64f000, 0x1dc64ffff] PGTABLE
[ 0.000000] BRK [0x1dc650000, 0x1dc650fff] PGTABLE
[ 0.000000] BRK [0x1dc651000, 0x1dc651fff] PGTABLE
[ 0.000000] BRK [0x1dc652000, 0x1dc652fff] PGTABLE
[ 0.000000] BRK [0x1dc653000, 0x1dc653fff] PGTABLE
[ 0.000000] BRK [0x1dc654000, 0x1dc654fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3715a000-0x378a4fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000DAFFE170 0000BC (v01 LENOVO TP-G2 00002650 PTL 00000002)
[ 0.000000] ACPI: FACP 0x00000000DAFE5000 00010C (v05 LENOVO TP-G2 00002650 PTL 00000002)
[ 0.000000] ACPI: DSDT 0x00000000DAFE7000 011383 (v01 LENOVO TP-G2 00002650 INTL 20061109)
[ 0.000000] ACPI: FACS 0x00000000DAF5A000 000040
[ 0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-G2 00002650 PTL 00000001)
[ 0.000000] ACPI: TCPA 0x00000000DAFFC000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.000000] ACPI: SSDT 0x00000000DAFFB000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000DAFFA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000DAFF9000 0007A8 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: HPET 0x00000000DAFE3000 000038 (v01 LENOVO TP-G2 00002650 PTL 00000002)
[ 0.000000] ACPI: APIC 0x00000000DAFE2000 000098 (v01 LENOVO TP-G2 00002650 PTL 00000002)
[ 0.000000] ACPI: MCFG 0x00000000DAFE1000 00003C (v01 LENOVO TP-G2 00002650 PTL 00000002)
[ 0.000000] ACPI: ECDT 0x00000000DAFE0000 000052 (v01 LENOVO TP-G2 00002650 PTL 00000002)
[ 0.000000] ACPI: FPDT 0x00000000DAFDF000 000064 (v01 LENOVO TP-G2 00002650 PTL 00000002)
[ 0.000000] ACPI: ASF! 0x00000000DAFE6000 0000A5 (v32 LENOVO TP-G2 00002650 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x00000000DAFDE000 00003E (v01 LENOVO TP-G2 00002650 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x00000000DAFDD000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: POAT 0x00000000DAFDC000 000055 (v03 LENOVO TP-G2 00002650 PTL 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DAFDB000 000C79 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000DAFDA000 000A83 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x00000000DAFD9000 0002A6 (v01 LENOVO TP-G2 00002650 PTL 00000002)
[ 0.000000] ACPI: DBG2 0x00000000DAFD8000 0000E9 (v00 LENOVO TP-G2 00002650 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041e5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41e5f2000-0x41e5f4fff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041e5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.000000] node 0: [mem 0x0000000040005000-0x00000000cec30fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041e5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041e5fffff]
[ 0.000000] On node 0 totalpages: 4116428
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13161 pages used for memmap
[ 0.000000] DMA32 zone: 842288 pages, LIFO batch:31
[ 0.000000] Normal zone: 51096 pages used for memmap
[ 0.000000] Normal zone: 3270144 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 100 pages
[ 0.000000] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcec31000-0xdae9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdafff000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4052086
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c42b4e60-8c84-48ea-af3b-f68e9184728e rw "acpi_osi=!Windows 2012" quiet
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16109704K/16465712K available (10252K kernel code, 1263K rwdata, 3372K rodata, 1452K init, 632K bss, 356008K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 31747 entries in 125 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: .
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180105
[ 0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.016666] tsc: Fast TSC calibration using PIT
[ 0.019999] tsc: Detected 2594.128 MHz processor
[ 0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x256490cd5f3, max_idle_ns: 440795204886 ns
[ 0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.43 BogoMIPS (lpj=8647093)
[ 0.019999] pid_max: default: 32768 minimum: 301
[ 0.019999] Security Framework initialized
[ 0.019999] Yama: becoming mindful.
[ 0.023797] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.025330] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.025398] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.025446] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.025716] CPU: Physical Processor ID: 0
[ 0.025717] CPU: Processor Core ID: 0
[ 0.025724] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.025725] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.025730] mce: CPU supports 7 MCE banks
[ 0.025740] CPU0: Thermal monitoring enabled (TM1)
[ 0.025752] process: using mwait in idle threads
[ 0.025755] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.025756] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.025759] Spectre V2 : Mitigation: Full generic retpoline
[ 0.025891] Freeing SMP alternatives memory: 24K
[ 0.026761] TSC deadline timer enabled
[ 0.026765] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.040015] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.040054] ... version: 3
[ 0.040055] ... bit width: 48
[ 0.040055] ... generic registers: 4
[ 0.040057] ... value mask: 0000ffffffffffff
[ 0.040057] ... max period: 00007fffffffffff
[ 0.040058] ... fixed-purpose events: 3
[ 0.040059] ... event mask: 000000070000000f
[ 0.046673] Hierarchical SRCU implementation.
[ 0.066948] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.073340] smp: Bringing up secondary CPUs ...
[ 0.103364] x86: Booting SMP configuration:
[ 0.103366] .... node #0, CPUs: #1 #2 #3
[ 0.165757] smp: Brought up 1 node, 4 CPUs
[ 0.165757] smpboot: Max logical packages: 2
[ 0.165757] smpboot: Total of 4 processors activated (20761.73 BogoMIPS)
[ 0.167219] devtmpfs: initialized
[ 0.167219] x86/mm: Memory block size: 128MB
[ 0.168297] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
[ 0.168297] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.168297] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.168297] pinctrl core: initialized pinctrl subsystem
[ 0.168297] RTC time: 7:17:18, date: 05/12/18
[ 0.168297] NET: Registered protocol family 16
[ 0.168297] cpuidle: using governor ladder
[ 0.173347] cpuidle: using governor menu
[ 0.173380] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.173382] ACPI: bus type PCI registered
[ 0.173384] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.173617] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.173627] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.173627] PCI: Using configuration type 1 for base access
[ 0.173632] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.174664] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.174664] ACPI: Added _OSI(Module Device)
[ 0.174664] ACPI: Added _OSI(Processor Device)
[ 0.174664] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.174664] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.174664] ACPI: Deleted _OSI(Windows 2012)
[ 0.174664] ACPI: EC: EC started
[ 0.174664] ACPI: EC: interrupt blocked
[ 0.177100] ACPI: \: Used as first EC
[ 0.177102] ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.177104] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.184542] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.191497] ACPI: Dynamic OEM Table Load:
[ 0.191510] ACPI: SSDT 0xFFFF9B630BD33000 000A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.192246] ACPI: Dynamic OEM Table Load:
[ 0.192254] ACPI: SSDT 0xFFFF9B630BEA4800 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.192789] ACPI: Dynamic OEM Table Load:
[ 0.192796] ACPI: SSDT 0xFFFF9B630BE7D200 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.194323] ACPI: Interpreter enabled
[ 0.194351] ACPI: (supports S0 S3 S4 S5)
[ 0.194353] ACPI: Using IOAPIC for interrupt routing
[ 0.194385] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.194836] ACPI: GPE 0x16 active on init
[ 0.194851] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.200927] ACPI: Power Resource [PUBS] (on)
[ 0.201419] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[ 0.203170] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[ 0.206633] acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
[ 0.207483] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.207669] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.207855] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.208041] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.208226] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.208408] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.208593] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.208778] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.208924] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.208930] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.209184] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.209301] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.209304] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.209307] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.209309] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.209604] PCI host bridge to bus 0000:00
[ 0.209607] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.209609] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.209611] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.209613] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
[ 0.209615] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
[ 0.209618] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.209628] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.209748] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.209763] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.209770] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.209775] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
[ 0.209906] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.209936] pci 0000:00:14.0: reg 0x10: [mem 0xf2520000-0xf252ffff 64bit]
[ 0.210025] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.210124] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.210154] pci 0000:00:16.0: reg 0x10: [mem 0xf2535000-0xf253500f 64bit]
[ 0.210242] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.210332] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
[ 0.210356] pci 0000:00:16.3: reg 0x10: [io 0x60b0-0x60b7]
[ 0.210367] pci 0000:00:16.3: reg 0x14: [mem 0xf253c000-0xf253cfff]
[ 0.210536] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.210559] pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff]
[ 0.210569] pci 0000:00:19.0: reg 0x14: [mem 0xf253b000-0xf253bfff]
[ 0.210579] pci 0000:00:19.0: reg 0x18: [io 0x6080-0x609f]
[ 0.210652] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.210746] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.210772] pci 0000:00:1a.0: reg 0x10: [mem 0xf253a000-0xf253a3ff]
[ 0.210870] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.210966] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.210992] pci 0000:00:1b.0: reg 0x10: [mem 0xf2530000-0xf2533fff 64bit]
[ 0.211083] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.211186] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.211333] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.211445] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.211590] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.211699] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.211844] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.211962] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.211988] pci 0000:00:1d.0: reg 0x10: [mem 0xf2539000-0xf25393ff]
[ 0.212086] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.212181] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.212392] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.212414] pci 0000:00:1f.2: reg 0x10: [io 0x60a8-0x60af]
[ 0.212424] pci 0000:00:1f.2: reg 0x14: [io 0x60bc-0x60bf]
[ 0.212433] pci 0000:00:1f.2: reg 0x18: [io 0x60a0-0x60a7]
[ 0.212442] pci 0000:00:1f.2: reg 0x1c: [io 0x60b8-0x60bb]
[ 0.212452] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
[ 0.212461] pci 0000:00:1f.2: reg 0x24: [mem 0xf2538000-0xf25387ff]
[ 0.212513] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.212601] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.212624] pci 0000:00:1f.3: reg 0x10: [mem 0xf2534000-0xf25340ff 64bit]
[ 0.212648] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.212953] pci 0000:02:00.0: [1180:e823] type 00 class 0x088001
[ 0.212982] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.213022] pci 0000:02:00.0: reg 0x10: [mem 0xf1d00000-0xf1d000ff]
[ 0.213295] pci 0000:02:00.0: supports D1 D2
[ 0.213297] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.223430] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.223436] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.223442] pci 0000:00:1c.0: bridge window [mem 0xf1d00000-0xf24fffff]
[ 0.223451] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.223651] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
[ 0.223895] pci 0000:03:00.0: reg 0x10: [mem 0xf1c00000-0xf1c01fff 64bit]
[ 0.224751] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.233483] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.233493] pci 0000:00:1c.1: bridge window [mem 0xf1c00000-0xf1cfffff]
[ 0.233606] acpiphp: Slot [1] registered
[ 0.233617] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.233622] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.233627] pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff]
[ 0.233635] pci 0000:00:1c.2: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.235258] ACPI: EC: interrupt unblocked
[ 0.235268] ACPI: EC: event unblocked
[ 0.235276] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.235278] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.235364] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.235364] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.235364] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.235364] vgaarb: loaded
[ 0.235364] EDAC MC: Ver: 3.0.0
[ 0.235364] PCI: Using ACPI for IRQ routing
[ 0.237916] PCI: pci_cache_line_size set to 64 bytes
[ 0.238272] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.238274] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.238275] e820: reserve RAM buffer [mem 0xcec31000-0xcfffffff]
[ 0.238277] e820: reserve RAM buffer [mem 0x41e600000-0x41fffffff]
[ 0.238395] NetLabel: Initializing
[ 0.238396] NetLabel: domain hash size = 128
[ 0.238397] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.238416] NetLabel: unlabeled traffic allowed by default
[ 0.238421] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.238421] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.240025] clocksource: Switched to clocksource tsc-early
[ 0.253707] VFS: Disk quotas dquot_6.6.0
[ 0.253730] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.253815] pnp: PnP ACPI init
[ 0.254713] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.254716] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.254718] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.254720] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.254723] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.254725] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.254727] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.254729] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.254731] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.254734] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.254736] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.254738] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.254740] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.254742] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.254745] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[ 0.254747] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.254750] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.254757] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.254915] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[ 0.254940] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.254942] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.254944] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.254947] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.254949] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.254952] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.254954] system 00:01: [mem 0xfffff000-0xffffffff] has been reserved
[ 0.254957] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.254959] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.254961] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.254963] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.254966] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.254971] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.255049] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.255081] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.255108] pnp 00:04: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active)
[ 0.255184] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.255892] pnp: PnP ACPI: found 6 devices
[ 0.262381] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.262431] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.262439] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.262446] pci 0000:00:1c.0: bridge window [mem 0xf1d00000-0xf24fffff]
[ 0.262452] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.262461] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.262468] pci 0000:00:1c.1: bridge window [mem 0xf1c00000-0xf1cfffff]
[ 0.262481] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.262484] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.262492] pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff]
[ 0.262497] pci 0000:00:1c.2: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.262507] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.262509] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.262512] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.262514] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff window]
[ 0.262516] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
[ 0.262518] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.262520] pci_bus 0000:02: resource 1 [mem 0xf1d00000-0xf24fffff]
[ 0.262522] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.262524] pci_bus 0000:03: resource 1 [mem 0xf1c00000-0xf1cfffff]
[ 0.262526] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.262528] pci_bus 0000:04: resource 1 [mem 0xf1400000-0xf1bfffff]
[ 0.262530] pci_bus 0000:04: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.262686] NET: Registered protocol family 2
[ 0.262869] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.262939] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.263220] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.263376] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.263429] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.263483] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.263580] NET: Registered protocol family 1
[ 0.263599] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.264317] PCI: CLS 64 bytes, default 64
[ 0.264370] Unpacking initramfs...
[ 0.425398] Freeing initrd memory: 7468K
[ 0.425409] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.425413] software IO TLB [mem 0xcac31000-0xcec31000] (64MB) mapped at [000000006b1a865f-00000000a5fdc4f4]
[ 0.425586] Scanning for low memory corruption every 60 seconds
[ 0.426283] Initialise system trusted keyrings
[ 0.426297] Key type blacklist registered
[ 0.426360] workingset: timestamp_bits=44 max_order=22 bucket_order=0
[ 0.427842] zbud: loaded
[ 0.429492] Key type asymmetric registered
[ 0.429494] Asymmetric key parser 'x509' registered
[ 0.429542] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.429580] io scheduler noop registered
[ 0.429582] io scheduler deadline registered
[ 0.429634] io scheduler cfq registered (default)
[ 0.429635] io scheduler mq-deadline registered
[ 0.429637] io scheduler kyber registered
[ 0.429644] io scheduler bfq registered
[ 0.430466] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 0.430467] vesafb: scrolling: redraw
[ 0.430470] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.430485] vesafb: framebuffer at 0xe0000000, mapped to 0x00000000096af5c9, using 4160k, total 4160k
[ 0.521187] Console: switching to colour frame buffer device 170x48
[ 0.611539] fb0: VESA VGA frame buffer device
[ 0.611562] intel_idle: MWAIT substates: 0x21120
[ 0.611563] intel_idle: v0.4.1 model 0x3A
[ 0.611729] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.611787] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.611810] ACPI: Lid Switch [LID]
[ 0.611856] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.611876] ACPI: Sleep Button [SLPB]
[ 0.611937] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.611954] ACPI: Power Button [PWRF]
[ 0.614088] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.614090] ACPI: Thermal Zone [THM0] (50 C)
[ 0.614304] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.635423] 0000:00:16.3: ttyS0 at I/O 0x60b0 (irq = 19, base_baud = 115200) is a 16550A
[ 0.636492] intel_pstate: Intel P-state driver initializing
[ 0.636717] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.637141] NET: Registered protocol family 10
[ 0.644162] Segment Routing with IPv6
[ 0.644208] NET: Registered protocol family 17
[ 0.644602] RAS: Correctable Errors collector initialized.
[ 0.644668] microcode: sig=0x306a9, pf=0x10, revision=0x1b
[ 0.644781] microcode: Microcode Update Driver: v2.2.
[ 0.644799] sched_clock: Marking stable (644772010, 0)->(723854026, -79082016)
[ 0.645136] registered taskstats version 1
[ 0.645151] Loading compiled-in X.509 certificates
[ 0.645181] zswap: loaded using pool lzo/zbud
[ 0.649336] Key type big_key registered
[ 0.649798] Magic number: 2:355:268
[ 0.649864] hctosys: unable to open rtc device (rtc0)
[ 0.652154] Freeing unused kernel memory: 1452K
[ 0.652155] Write protecting the kernel read-only data: 16384k
[ 0.652863] Freeing unused kernel memory: 2016K
[ 0.655223] Freeing unused kernel memory: 724K
[ 0.722420] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.724315] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.724449] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.731596] ACPI: bus type USB registered
[ 0.731620] usbcore: registered new interface driver usbfs
[ 0.731631] usbcore: registered new interface driver hub
[ 0.731850] usbcore: registered new device driver usb
[ 0.733279] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.735488] SCSI subsystem initialized
[ 0.736607] ehci-pci: EHCI PCI platform driver
[ 0.736816] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.736823] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.736841] ehci-pci 0000:00:1a.0: debug port 2
[ 0.739745] libata version 3.00 loaded.
[ 0.740752] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.740772] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf253a000
[ 0.741695] sdhci: Secure Digital Host Controller Interface driver
[ 0.741696] sdhci: Copyright(c) Pierre Ossman
[ 0.742605] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 0.743166] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 0.743363] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 0.753353] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.753548] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.753550] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.753552] usb usb1: Product: EHCI Host Controller
[ 0.753554] usb usb1: Manufacturer: Linux 4.16.3-1-ARCH ehci_hcd
[ 0.753556] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.753702] hub 1-0:1.0: USB hub found
[ 0.753712] hub 1-0:1.0: 3 ports detected
[ 0.754099] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.754105] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.754122] ehci-pci 0000:00:1d.0: debug port 2
[ 0.754227] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.758021] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.758035] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2539000
[ 0.770098] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.770215] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.770218] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.770220] usb usb2: Product: EHCI Host Controller
[ 0.770221] usb usb2: Manufacturer: Linux 4.16.3-1-ARCH ehci_hcd
[ 0.770223] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.770498] hub 2-0:1.0: USB hub found
[ 0.770518] hub 2-0:1.0: 3 ports detected
[ 0.771057] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.771067] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.772158] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[ 0.772167] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.772332] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.772334] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.772336] usb usb3: Product: xHCI Host Controller
[ 0.772337] usb usb3: Manufacturer: Linux 4.16.3-1-ARCH xhci-hcd
[ 0.772339] usb usb3: SerialNumber: 0000:00:14.0
[ 0.772508] hub 3-0:1.0: USB hub found
[ 0.772527] hub 3-0:1.0: 4 ports detected
[ 0.773246] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.773252] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.773334] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.773346] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.773348] usb usb4: Product: xHCI Host Controller
[ 0.773351] usb usb4: Manufacturer: Linux 4.16.3-1-ARCH xhci-hcd
[ 0.773353] usb usb4: SerialNumber: 0000:00:14.0
[ 0.773500] hub 4-0:1.0: USB hub found
[ 0.773518] hub 4-0:1.0: 4 ports detected
[ 0.774386] ahci 0000:00:1f.2: version 3.0
[ 0.774577] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.786788] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
[ 0.786794] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[ 0.808394] scsi host0: ahci
[ 0.808777] scsi host1: ahci
[ 0.809031] scsi host2: ahci
[ 0.809205] scsi host3: ahci
[ 0.809387] scsi host4: ahci
[ 0.809612] scsi host5: ahci
[ 0.809698] ata1: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538100 irq 25
[ 0.809704] ata2: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538180 irq 25
[ 0.809706] ata3: DUMMY
[ 0.809707] ata4: DUMMY
[ 0.809712] ata5: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538300 irq 25
[ 0.809714] ata6: DUMMY
[ 1.083367] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.100028] usb 3-4: new high-speed USB device number 2 using xhci_hcd
[ 1.100031] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.126191] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.127258] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.127264] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.127268] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.127497] ata1.00: ATA-9: CT250BX100SSD1, MU01, max UDMA/133
[ 1.127502] ata1.00: 488397168 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[ 1.128172] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.128178] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.128182] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.128506] ata1.00: configured for UDMA/133
[ 1.128871] scsi 0:0:0:0: Direct-Access ATA CT250BX100SSD1 MU01 PQ: 0 ANSI: 5
[ 1.230833] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.230839] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.231619] hub 1-1:1.0: USB hub found
[ 1.231925] hub 1-1:1.0: 6 ports detected
[ 1.243870] usb 3-4: New USB device found, idVendor=0bdb, idProduct=1926
[ 1.243875] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.243878] usb 3-4: Product: H5321 gw
[ 1.243880] usb 3-4: Manufacturer: Lenovo
[ 1.243883] usb 3-4: SerialNumber: F9975B3F3A590EM0
[ 1.247117] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.247122] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.247511] hub 2-1:1.0: USB hub found
[ 1.247587] hub 2-1:1.0: 8 ports detected
[ 1.440107] tsc: Refined TSC clocksource calibration: 2594.116 MHz
[ 1.440135] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256485898c4, max_idle_ns: 440795246280 ns
[ 1.440183] clocksource: Switched to clocksource tsc
[ 1.444135] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.513431] usb 1-1.6: new high-speed USB device number 3 using ehci-pci
[ 1.618855] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d2
[ 1.618861] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.618864] usb 1-1.6: Product: Integrated Camera
[ 1.618867] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
[ 1.757692] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.764048] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 1.764080] sd 0:0:0:0: [sda] Write Protect is off
[ 1.764086] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.764133] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.769039] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 1.770104] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.856142] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 1.997175] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 2.013601] systemd[1]: Detected architecture x86-64.
[ 2.016247] systemd[1]: Set hostname to <x230>.
[ 2.117885] systemd[1]: Listening on udev Control Socket.
[ 2.117994] systemd[1]: Listening on udev Kernel Socket.
[ 2.118198] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.118261] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.118333] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.119298] systemd[1]: Created slice User and Session Slice.
[ 2.124356] systemd[1]: Created slice system-getty.slice.
[ 2.146730] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[ 2.153816] vboxdrv: loading out-of-tree module taints kernel.
[ 2.165444] vboxdrv: Found 4 processor cores
[ 2.190220] vboxdrv: TSC mode is Invariant, tentative frequency 2594110729 Hz
[ 2.190222] vboxdrv: Successfully loaded version 5.2.10 (interface 0x00290001)
[ 2.191493] VBoxPciLinuxInit
[ 2.191499] vboxpci: IOMMU not found (not registered)
[ 2.192522] VBoxNetAdp: Successfully started.
[ 2.194102] VBoxNetFlt: Successfully started.
[ 2.200067] systemd-journald[218]: Received request to flush runtime journal from PID 1
[ 2.207824] systemd-journald[218]: File /var/log/journal/3135d94d62ec42d086649c13ade801f8/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 2.210596] Adding 1048572k swap on /swapfile. Priority:-2 extents:2 across:1056764k SSFS
[ 2.338215] pps_core: LinuxPPS API ver. 1 registered
[ 2.338219] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.357951] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.362186] PTP clock support registered
[ 2.362621] rtc_cmos 00:02: RTC can wake from S4
[ 2.362998] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.363073] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.367678] ACPI: Battery Slot [BAT0] (battery present)
[ 2.367857] ACPI: AC Adapter [AC] (on-line)
[ 2.418795] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 2.418935] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 2.419010] Linux agpgart interface v0.103
[ 2.420198] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20180105/utaddress-247)
[ 2.420205] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.420211] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20180105/utaddress-247)
[ 2.420215] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.420217] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20180105/utaddress-247)
[ 2.420221] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.420222] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20180105/utaddress-247)
[ 2.420226] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.420226] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.420882] cdc_acm 3-4:1.1: ttyACM0: USB ACM device
[ 2.421035] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 2.421037] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.423928] cdc_acm 3-4:1.3: ttyACM1: USB ACM device
[ 2.427122] Non-volatile memory driver v1.3
[ 2.431923] cdc_acm 3-4:1.9: ttyACM2: USB ACM device
[ 2.432240] usbcore: registered new interface driver cdc_acm
[ 2.432241] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.433034] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.433667] media: Linux media interface: v0.10
[ 2.446363] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[ 2.457013] cdc_wdm 3-4:1.5: cdc-wdm0: USB WDM device
[ 2.457073] cdc_wdm 3-4:1.8: cdc-wdm1: USB WDM device
[ 2.457100] usbcore: registered new interface driver cdc_wdm
[ 2.459068] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 2.459070] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.459072] thinkpad_acpi: ThinkPad BIOS G2ETA5WW (2.65 ), EC unknown
[ 2.459073] thinkpad_acpi: Lenovo ThinkPad X230, model 2325AS6
[ 2.462631] Linux video capture interface: v2.00
[ 2.466661] thinkpad_acpi: radio switch found; radios are enabled
[ 2.467002] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 2.467003] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 2.469671] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[ 2.476894] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 2.479552] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 2.481139] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.491128] cdc_ncm 3-4:1.6: MAC-Address: 02:15:e0:ec:01:00
[ 2.491377] cdc_ncm 3-4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:14.0-4, Mobile Broadband Network Device, 02:15:e0:ec:01:00
[ 2.491423] usbcore: registered new interface driver cdc_ncm
[ 2.497205] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 2.512331] usbcore: registered new interface driver cdc_mbim
[ 2.514151] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.517578] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2.517581] cfg80211: failed to load regulatory.db
[ 2.528798] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 2.528800] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 2.528801] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 2.528802] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 2.533908] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d2)
[ 2.538696] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 2.538699] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 2.538701] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 2.538703] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 2.538782] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8
[ 2.538860] usbcore: registered new interface driver uvcvideo
[ 2.538861] USB Video Class driver (1.1.1)
[ 2.562445] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 2.566338] Intel(R) Wireless WiFi driver for Linux
[ 2.566340] Copyright(c) 2003- 2015 Intel Corporation
[ 2.566946] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.573417] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 2.619829] fuse init (API version 7.26)
[ 2.644988] iTCO_vendor_support: vendor-support=0
[ 2.648799] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.648858] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.650089] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.658274] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
[ 2.666603] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 2.666606] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 2.666608] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 2.666610] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 2.695231] cdc_ncm 3-4:1.6 wwp0s20u4i6: renamed from wwan0
[ 2.715606] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:87:c8:ca
[ 2.715609] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.715661] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 2.716144] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.724259] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.727603] cryptd: max_cpu_qlen set to 1000
[ 2.731310] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 2.734708] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 2.741152] AVX version of gcm_enc/dec engaged.
[ 2.741154] AES CTR mode by8 optimization enabled
[ 2.741551] EXT4-fs (sda3): mounted filesystem without journal. Opts: (null)
[ 2.752721] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 2.814902] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[ 2.814904] fb: switching to inteldrmfb from VESA VGA
[ 2.814941] Console: switching to colour dummy device 80x25
[ 2.815463] [drm] Replacing VGA console driver
[ 2.816095] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.816096] [drm] Driver supports precise vblank timestamp query.
[ 2.816622] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.876723] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[ 2.878259] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 2.879957] acpi device:00: registered as cooling_device4
[ 2.880088] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 2.884870] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.890832] kvm: disabled by bios
[ 2.906315] intel_rapl: Found RAPL domain package
[ 2.906316] intel_rapl: Found RAPL domain core
[ 2.906317] intel_rapl: Found RAPL domain uncore
[ 2.906321] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 3.007839] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 3.007842] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.007843] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 3.007844] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 3.007845] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 3.007847] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 3.007848] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 3.007849] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 3.026187] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 3.027012] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 3.027088] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 3.027155] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 3.027222] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 3.029634] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 3.029715] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 3.029789] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 3.093349] fbcon: inteldrmfb (fb0) is primary device
[ 3.304727] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 3.336049] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 3.397781] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
[ 3.397798] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 3.437438] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 3.445819] mousedev: PS/2 mouse device common for all mice
[ 3.872591] Console: switching to colour frame buffer device 170x48
[ 3.894246] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.086441] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 4.285458] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input18
[ 33.550776] random: crng init done
[ 93.208212] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 93.443832] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 93.453887] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 93.467176] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 93.773364] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 93.855933] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 93.883682] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 94.181543] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 94.265284] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 94.868614] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 94.870450] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 94.883577] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 95.181726] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 95.265873] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 95.293775] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 95.600855] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 95.685504] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 104.299255] systemd-journald[218]: File /var/log/journal/3135d94d62ec42d086649c13ade801f8/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 104.698449] Key type trusted registered
[ 104.704495] Key type encrypted registered
[ 185.390248] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 185.392044] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 185.405272] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 185.705879] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 185.788722] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 185.819867] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 186.128129] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 186.212203] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Advice and suggestions would be much appreciated.
Offline
Please paste the output, in code tags, of `pacman -Q linux && uname -r`
Offline
pacman: /usr/lib/libcurl.so.4: no version information available (required by /usr/lib/libalpm.so.10)
linux 4.16.3-1
4.16.3-1-ARCH
Offline
Appears to be a broken or partial upgrade. I suggest following Pacman#Pacman_crashes_during_an_upgrade (ensure the systems /boot is mounted)
or paste the contents of /var/log/pacman.log from live media to a pastebin.
Offline
Pages: 1