You are not logged in.
- Topics: Active | Unanswered
#1 2018-05-19 08:04:48
- Jagger
- Member
- Registered: 2018-03-04
- Posts: 31
[SOLVED] Is there any solution for nvidia 396 screen tearring?
Hello Everyone,
After fresh instalation and struggling with not working Xorg: see my topic and solution and installation details - https://bbs.archlinux.org/viewtopic.php?id=236922
I experienced awful screen tearing. Following the instruction on ArchWiki to solve the issue was unsuccessful. I read posts that present driver version 390xx is - gentle saying- bugy and to get rid of this tearing it needs to be installed driver 384 or 387 version. I installed linux-lts so if anyone could guide me how to install 384 or 387 driver I would be greatfull. I was trying use 'downgrade' but there is only 340xx beside 390xx however in my last topic (see link provided above) this version of the driver does not work for me.
Thank you in advance.
Last edited by Jagger (2018-05-21 15:17:06)
Offline
#2 2018-05-19 10:24:15
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 21,620
Re: [SOLVED] Is there any solution for nvidia 396 screen tearring?
The post that mentioned that 390xx were buggy are with old versions of 390xx (the xx are bugfix/patch revisions, you can't just ignore them if one talks about driver stability), there's no issues with the recent versions, downgrading is a much more involved ordeal. Also there's no reason for you to use them, your card is supported by the latest nvidia package. (the nvidia package is the newest driver, it's at 396 currently)
Post about your actual issue, instead of a misguided attempt at downgrading to unsupported software versions. There are many ways to fix tearing depending on your environment, give information about that. Which deskop/window manager/graphical setup are you using? In which applications do you notice the tearing?
Last edited by V1del (2018-05-19 10:29:13)
Offline
#3 2018-05-19 10:54:52
- Jagger
- Member
- Registered: 2018-03-04
- Posts: 31
Re: [SOLVED] Is there any solution for nvidia 396 screen tearring?
@V1del Thank you for your reply.
First of all I would like to mention that I have installed the newest 396 driver but this did not channge anything. I am on Openbox without any of compositing manager such as compton.
Openbox based on Arch installed followed instructions on ArchWiki.
$ lspci -k | grep -A 2 -E "(VGA|3D)"==>
3:00.0 VGA compatible controller: NVIDIA Corporation GM204 [GeForce GTX 970] (rev a1)
Subsystem: Micro-Star International Co., Ltd. [MSI] GM204 [GeForce GTX 970]
Kernel driver in use: nvidia
Driver:
NVIDIA 396.24
the problem which I cannot solve is that whenever I follow instructions provided on https://wiki.archlinux.org/index.php/NV … leshooting
in section 'Avoid screen tearing' when I logout and trying to login the system freezes on default view of gray screen and nothing works until I remove from /etc/X11/xorg.conf.d/xorg.conf the line where it seays "Option "metamodes" "nvidia-auto-select +0+0 {ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}". Then system wakes up but there is obviously screen tearing issue. This appears on the web browsers when most of the page is a text. Scrolling down or up causes in the middle of the screen something like flickering the one or two lines.
Last edited by Jagger (2018-05-19 10:58:19)
Offline
#4 2018-05-19 11:10:00
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 21,620
Re: [SOLVED] Is there any solution for nvidia 396 screen tearring?
Can you still switch to a TTY when the freeze happens? Can you post a Xorg and journal log of a freezing session?
Offline
#5 2018-05-19 11:44:40
- Jagger
- Member
- Registered: 2018-03-04
- Posts: 31
Re: [SOLVED] Is there any solution for nvidia 396 screen tearring?
Yes I could:
Here you are a Xorg.0.log
[ 356.239]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 356.243] X Protocol Version 11, Revision 0
[ 356.245] Build Operating System: Linux 4.15.6-1-ARCH x86_64
[ 356.246] Current Operating System: Linux bromba 4.14.40-1-lts #1 SMP Wed May 9 13:00:32 CEST 2018 x86_64
[ 356.246] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux-lts.img root=UUID=509d2661-7f03-4d3c-ba88-8a78992e94df rw
[ 356.249] Build Date: 12 April 2018 05:31:07AM
[ 356.251]
[ 356.252] Current version of pixman: 0.34.0
[ 356.255] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 356.255] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 356.261] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 18 09:48:04 2018
[ 356.263] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 356.264] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 356.264] (==) No Layout section. Using the first Screen section.
[ 356.264] (==) No screen section available. Using defaults.
[ 356.264] (**) |-->Screen "Default Screen Section" (0)
[ 356.264] (**) | |-->Monitor "<default monitor>"
[ 356.264] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 356.264] (**) | |-->Device "Nvidia Card"
[ 356.264] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 356.264] (==) Automatically adding devices
[ 356.264] (==) Automatically enabling devices
[ 356.264] (==) Automatically adding GPU devices
[ 356.264] (==) Automatically binding GPU devices
[ 356.264] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 356.264] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[ 356.264] Entry deleted from font path.
[ 356.264] (Run 'mkfontdir' on "/usr/share/fonts/misc/").
[ 356.264] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 356.264] Entry deleted from font path.
[ 356.264] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 356.264] Entry deleted from font path.
[ 356.264] (==) FontPath set to:
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 356.264] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 356.264] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 356.264] (II) Loader magic: 0x5594212b0d60
[ 356.264] (II) Module ABI versions:
[ 356.264] X.Org ANSI C Emulation: 0.4
[ 356.264] X.Org Video Driver: 23.0
[ 356.264] X.Org XInput driver : 24.1
[ 356.264] X.Org Server Extension : 10.0
[ 356.265] (++) using VT number 1
[ 356.265] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 356.266] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 356.266] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 356.267] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 356.267] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[ 356.267] (--) PCI:*(0:3:0:0) 10de:13c2:1462:3160 rev 161, Mem @ 0xee000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 356.267] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 356.267] (II) LoadModule: "glx"
[ 356.267] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[ 356.269] (II) Module glx: vendor="NVIDIA Corporation"
[ 356.269] compiled for 4.0.2, module version = 1.0.0
[ 356.269] Module class: X.Org Server Extension
[ 356.269] (II) NVIDIA GLX Module 396.24 Wed Apr 25 23:17:01 PDT 2018
[ 356.269] (II) LoadModule: "nvidia"
[ 356.269] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 356.270] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 356.270] compiled for 4.0.2, module version = 1.0.0
[ 356.270] Module class: X.Org Video Driver
[ 356.270] (II) NVIDIA dlloader X Driver 396.24 Wed Apr 25 22:53:34 PDT 2018
[ 356.270] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 356.270] (II) systemd-logind: releasing fd for 226:0
[ 356.270] (II) Loading sub module "fb"
[ 356.270] (II) LoadModule: "fb"
[ 356.270] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 356.270] (II) Module fb: vendor="X.Org Foundation"
[ 356.270] compiled for 1.19.6, module version = 1.0.0
[ 356.270] ABI class: X.Org ANSI C Emulation, version 0.4
[ 356.270] (II) Loading sub module "wfb"
[ 356.270] (II) LoadModule: "wfb"
[ 356.270] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 356.270] (II) Module wfb: vendor="X.Org Foundation"
[ 356.270] compiled for 1.19.6, module version = 1.0.0
[ 356.270] ABI class: X.Org ANSI C Emulation, version 0.4
[ 356.270] (II) Loading sub module "ramdac"
[ 356.270] (II) LoadModule: "ramdac"
[ 356.270] (II) Module "ramdac" already built-in
[ 356.271] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 356.271] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 356.271] (==) NVIDIA(0): RGB weight 888
[ 356.271] (==) NVIDIA(0): Default visual is TrueColor
[ 356.271] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 356.271] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 356.271] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 356.271] (**) NVIDIA(0): Enabling 2D acceleration
[ 356.758] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:3:0:0
[ 356.758] (--) NVIDIA(0): CRT-0
[ 356.758] (--) NVIDIA(0): DFP-0 (boot)
[ 356.758] (--) NVIDIA(0): DFP-1
[ 356.758] (--) NVIDIA(0): DFP-2
[ 356.758] (--) NVIDIA(0): DFP-3
[ 356.758] (--) NVIDIA(0): DFP-4
[ 356.760] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 970 (GM204-A) at PCI:3:0:0 (GPU-0)
[ 356.760] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 356.760] (--) NVIDIA(0): VideoBIOS: 84.04.36.00.f1
[ 356.760] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 356.836] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 356.836] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 356.836] (--) NVIDIA(GPU-0):
[ 356.929] (--) NVIDIA(GPU-0): Idek Iiyama PL1980 (DFP-0): connected
[ 356.929] (--) NVIDIA(GPU-0): Idek Iiyama PL1980 (DFP-0): Internal TMDS
[ 356.929] (--) NVIDIA(GPU-0): Idek Iiyama PL1980 (DFP-0): 330.0 MHz maximum pixel clock
[ 356.929] (--) NVIDIA(GPU-0):
[ 356.929] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 356.929] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 356.929] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 356.929] (--) NVIDIA(GPU-0):
[ 356.929] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 356.929] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 356.929] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 356.929] (--) NVIDIA(GPU-0):
[ 356.929] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 356.929] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 356.929] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 356.929] (--) NVIDIA(GPU-0):
[ 356.929] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 356.929] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 356.929] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 356.929] (--) NVIDIA(GPU-0):
[ 356.931] (==) NVIDIA(0):
[ 356.931] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 356.931] (==) NVIDIA(0): will be used as the requested mode.
[ 356.931] (==) NVIDIA(0):
[ 356.931] (II) NVIDIA(0): Validated MetaModes:
[ 356.931] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 356.931] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[ 356.933] (--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
[ 356.933] (--) NVIDIA(0): option
[ 356.933] (--) Depth 24 pixmap format is 32 bpp
[ 356.934] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[ 356.934] (II) NVIDIA: access.
[ 356.936] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 356.936] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 356.936] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 356.936] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 356.936] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 356.936] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 356.936] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 356.936] (II) NVIDIA(0): Config Options in the README.
[ 356.948] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 356.967] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 356.967] (==) NVIDIA(0): Backing store enabled
[ 356.967] (==) NVIDIA(0): Silken mouse enabled
[ 356.967] (==) NVIDIA(0): DPMS enabled
[ 356.967] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 356.967] (II) Loading sub module "dri2"
[ 356.967] (II) LoadModule: "dri2"
[ 356.967] (II) Module "dri2" already built-in
[ 356.967] (II) NVIDIA(0): [DRI2] Setup complete
[ 356.967] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 356.967] (--) RandR disabled
[ 356.969] (II) Initializing extension GLX
[ 356.969] (II) Indirect GLX disabled.
[ 357.008] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 357.008] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 357.008] (II) LoadModule: "libinput"
[ 357.008] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 357.009] (II) Module libinput: vendor="X.Org Foundation"
[ 357.009] compiled for 1.19.6, module version = 0.27.1
[ 357.009] Module class: X.Org XInput Driver
[ 357.009] ABI class: X.Org XInput driver, version 24.1
[ 357.009] (II) Using input driver 'libinput' for 'Power Button'
[ 357.009] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 37 paused 0
[ 357.009] (**) Power Button: always reports core events
[ 357.009] (**) Option "Device" "/dev/input/event6"
[ 357.009] (**) Option "_source" "server/udev"
[ 357.010] (II) event6 - Power Button: is tagged by udev as: Keyboard
[ 357.010] (II) event6 - Power Button: device is a keyboard
[ 357.010] (II) event6 - Power Button: device removed
[ 357.010] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 357.010] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 357.010] (II) event6 - Power Button: is tagged by udev as: Keyboard
[ 357.010] (II) event6 - Power Button: device is a keyboard
[ 357.010] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 357.010] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 357.010] (II) Using input driver 'libinput' for 'Power Button'
[ 357.011] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 40 paused 0
[ 357.011] (**) Power Button: always reports core events
[ 357.011] (**) Option "Device" "/dev/input/event4"
[ 357.011] (**) Option "_source" "server/udev"
[ 357.011] (II) event4 - Power Button: is tagged by udev as: Keyboard
[ 357.011] (II) event4 - Power Button: device is a keyboard
[ 357.011] (II) event4 - Power Button: device removed
[ 357.011] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event4"
[ 357.011] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 357.011] (II) event4 - Power Button: is tagged by udev as: Keyboard
[ 357.011] (II) event4 - Power Button: device is a keyboard
[ 357.011] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 357.011] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 357.011] (II) Using input driver 'libinput' for 'Sleep Button'
[ 357.012] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 41 paused 0
[ 357.012] (**) Sleep Button: always reports core events
[ 357.012] (**) Option "Device" "/dev/input/event5"
[ 357.012] (**) Option "_source" "server/udev"
[ 357.012] (II) event5 - Sleep Button: is tagged by udev as: Keyboard
[ 357.012] (II) event5 - Sleep Button: device is a keyboard
[ 357.012] (II) event5 - Sleep Button: device removed
[ 357.012] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event5"
[ 357.012] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 357.012] (II) event5 - Sleep Button: is tagged by udev as: Keyboard
[ 357.012] (II) event5 - Sleep Button: device is a keyboard
[ 357.012] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[ 357.012] (II) No input driver specified, ignoring this device.
[ 357.012] (II) This device may have been added with another device file.
[ 357.013] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[ 357.013] (II) No input driver specified, ignoring this device.
[ 357.013] (II) This device may have been added with another device file.
[ 357.013] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
[ 357.013] (II) No input driver specified, ignoring this device.
[ 357.013] (II) This device may have been added with another device file.
[ 357.013] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19)
[ 357.013] (II) No input driver specified, ignoring this device.
[ 357.013] (II) This device may have been added with another device file.
[ 357.013] (II) config/udev: Adding input device Holtek USB Gaming Mouse (/dev/input/event0)
[ 357.013] (**) Holtek USB Gaming Mouse: Applying InputClass "libinput keyboard catchall"
[ 357.013] (II) Using input driver 'libinput' for 'Holtek USB Gaming Mouse'
[ 357.014] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 42 paused 0
[ 357.014] (**) Holtek USB Gaming Mouse: always reports core events
[ 357.014] (**) Option "Device" "/dev/input/event0"
[ 357.014] (**) Option "_source" "server/udev"
[ 357.014] (II) event0 - Holtek USB Gaming Mouse: is tagged by udev as: Keyboard
[ 357.014] (II) event0 - Holtek USB Gaming Mouse: device is a keyboard
[ 357.014] (II) event0 - Holtek USB Gaming Mouse: device removed
[ 357.014] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:04D9:A067.0001/input/input0/event0"
[ 357.014] (II) XINPUT: Adding extended input device "Holtek USB Gaming Mouse" (type: KEYBOARD, id 9)
[ 357.014] (II) event0 - Holtek USB Gaming Mouse: is tagged by udev as: Keyboard
[ 357.014] (II) event0 - Holtek USB Gaming Mouse: device is a keyboard
[ 357.014] (II) config/udev: Adding input device Holtek USB Gaming Mouse (/dev/input/event1)
[ 357.014] (**) Holtek USB Gaming Mouse: Applying InputClass "libinput pointer catchall"
[ 357.014] (**) Holtek USB Gaming Mouse: Applying InputClass "libinput keyboard catchall"
[ 357.014] (II) Using input driver 'libinput' for 'Holtek USB Gaming Mouse'
[ 357.015] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 43 paused 0
[ 357.015] (**) Holtek USB Gaming Mouse: always reports core events
[ 357.015] (**) Option "Device" "/dev/input/event1"
[ 357.015] (**) Option "_source" "server/udev"
[ 357.015] (II) event1 - Holtek USB Gaming Mouse: is tagged by udev as: Keyboard Mouse
[ 357.015] (II) event1 - Holtek USB Gaming Mouse: device is a pointer
[ 357.015] (II) event1 - Holtek USB Gaming Mouse: device is a keyboard
[ 357.015] (II) event1 - Holtek USB Gaming Mouse: device removed
[ 357.015] (II) libinput: Holtek USB Gaming Mouse: needs a virtual subdevice
[ 357.015] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:04D9:A067.0002/input/input1/event1"
[ 357.015] (II) XINPUT: Adding extended input device "Holtek USB Gaming Mouse" (type: MOUSE, id 10)
[ 357.015] (**) Option "AccelerationScheme" "none"
[ 357.015] (**) Holtek USB Gaming Mouse: (accel) selected scheme none/0
[ 357.015] (**) Holtek USB Gaming Mouse: (accel) acceleration factor: 2.000
[ 357.015] (**) Holtek USB Gaming Mouse: (accel) acceleration threshold: 4
[ 357.015] (II) event1 - Holtek USB Gaming Mouse: is tagged by udev as: Keyboard Mouse
[ 357.015] (II) event1 - Holtek USB Gaming Mouse: device is a pointer
[ 357.015] (II) event1 - Holtek USB Gaming Mouse: device is a keyboard
[ 357.016] (II) config/udev: Adding input device Holtek USB Gaming Mouse (/dev/input/mouse0)
[ 357.016] (II) No input driver specified, ignoring this device.
[ 357.016] (II) This device may have been added with another device file.
[ 357.016] (II) config/udev: Adding input device SONiX USB Keyboard (/dev/input/event2)
[ 357.016] (**) SONiX USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 357.016] (II) Using input driver 'libinput' for 'SONiX USB Keyboard'
[ 357.016] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 44 paused 0
[ 357.016] (**) SONiX USB Keyboard: always reports core events
[ 357.016] (**) Option "Device" "/dev/input/event2"
[ 357.016] (**) Option "_source" "server/udev"
[ 357.016] (II) event2 - SONiX USB Keyboard: is tagged by udev as: Keyboard
[ 357.016] (II) event2 - SONiX USB Keyboard: device is a keyboard
[ 357.016] (II) event2 - SONiX USB Keyboard: device removed
[ 357.016] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:0C45:760B.0004/input/input2/event2"
[ 357.016] (II) XINPUT: Adding extended input device "SONiX USB Keyboard" (type: KEYBOARD, id 11)
[ 357.017] (II) event2 - SONiX USB Keyboard: is tagged by udev as: Keyboard
[ 357.017] (II) event2 - SONiX USB Keyboard: device is a keyboard
[ 357.017] (II) config/udev: Adding input device SONiX USB Keyboard (/dev/input/event3)
[ 357.017] (**) SONiX USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 357.017] (II) Using input driver 'libinput' for 'SONiX USB Keyboard'
[ 357.017] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 45 paused 0
[ 357.017] (**) SONiX USB Keyboard: always reports core events
[ 357.017] (**) Option "Device" "/dev/input/event3"
[ 357.017] (**) Option "_source" "server/udev"
[ 357.017] (II) event3 - SONiX USB Keyboard: is tagged by udev as: Keyboard
[ 357.017] (II) event3 - SONiX USB Keyboard: device is a keyboard
[ 357.017] (II) event3 - SONiX USB Keyboard: device removed
[ 357.018] (II) libinput: SONiX USB Keyboard: needs a virtual subdevice
[ 357.018] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:0C45:760B.0005/input/input3/event3"
[ 357.018] (II) XINPUT: Adding extended input device "SONiX USB Keyboard" (type: MOUSE, id 12)
[ 357.018] (**) Option "AccelerationScheme" "none"
[ 357.018] (**) SONiX USB Keyboard: (accel) selected scheme none/0
[ 357.018] (**) SONiX USB Keyboard: (accel) acceleration factor: 2.000
[ 357.018] (**) SONiX USB Keyboard: (accel) acceleration threshold: 4
[ 357.018] (II) event3 - SONiX USB Keyboard: is tagged by udev as: Keyboard
[ 357.018] (II) event3 - SONiX USB Keyboard: device is a keyboard
[ 357.018] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10)
[ 357.018] (II) No input driver specified, ignoring this device.
[ 357.018] (II) This device may have been added with another device file.
[ 357.018] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11)
[ 357.018] (II) No input driver specified, ignoring this device.
[ 357.018] (II) This device may have been added with another device file.
[ 357.018] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event12)
[ 357.018] (II) No input driver specified, ignoring this device.
[ 357.018] (II) This device may have been added with another device file.
[ 357.018] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event13)
[ 357.018] (II) No input driver specified, ignoring this device.
[ 357.018] (II) This device may have been added with another device file.
[ 357.019] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event14)
[ 357.019] (II) No input driver specified, ignoring this device.
[ 357.019] (II) This device may have been added with another device file.
[ 357.019] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[ 357.019] (II) No input driver specified, ignoring this device.
[ 357.019] (II) This device may have been added with another device file.
[ 357.019] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 357.019] (II) No input driver specified, ignoring this device.
[ 357.019] (II) This device may have been added with another device file.
[ 357.019] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
[ 357.019] (II) No input driver specified, ignoring this device.
[ 357.019] (II) This device may have been added with another device file.
[ 357.019] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 357.019] (II) No input driver specified, ignoring this device.
[ 357.019] (II) This device may have been added with another device file.
[ 357.021] (**) Holtek USB Gaming Mouse: Applying InputClass "libinput pointer catchall"
[ 357.021] (**) Holtek USB Gaming Mouse: Applying InputClass "libinput keyboard catchall"
[ 357.021] (II) Using input driver 'libinput' for 'Holtek USB Gaming Mouse'
[ 357.021] (II) systemd-logind: returning pre-existing fd for /dev/input/event1 13:65
[ 357.021] (**) Holtek USB Gaming Mouse: always reports core events
[ 357.021] (**) Option "Device" "/dev/input/event1"
[ 357.021] (**) Option "_source" "_driver/libinput"
[ 357.021] (II) libinput: Holtek USB Gaming Mouse: is a virtual subdevice
[ 357.021] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:04D9:A067.0002/input/input1/event1"
[ 357.021] (II) XINPUT: Adding extended input device "Holtek USB Gaming Mouse" (type: KEYBOARD, id 13)
[ 357.021] (**) SONiX USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 357.021] (II) Using input driver 'libinput' for 'SONiX USB Keyboard'
[ 357.021] (II) systemd-logind: returning pre-existing fd for /dev/input/event3 13:67
[ 357.021] (**) SONiX USB Keyboard: always reports core events
[ 357.021] (**) Option "Device" "/dev/input/event3"
[ 357.021] (**) Option "_source" "_driver/libinput"
[ 357.021] (II) libinput: SONiX USB Keyboard: is a virtual subdevice
[ 357.021] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:0C45:760B.0005/input/input3/event3"
[ 357.021] (II) XINPUT: Adding extended input device "SONiX USB Keyboard" (type: KEYBOARD, id 14)
[ 357.177] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 357.177] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 357.177] (--) NVIDIA(GPU-0):
[ 357.269] (--) NVIDIA(GPU-0): Idek Iiyama PL1980 (DFP-0): connected
[ 357.269] (--) NVIDIA(GPU-0): Idek Iiyama PL1980 (DFP-0): Internal TMDS
[ 357.269] (--) NVIDIA(GPU-0): Idek Iiyama PL1980 (DFP-0): 330.0 MHz maximum pixel clock
[ 357.269] (--) NVIDIA(GPU-0):
[ 357.269] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 357.269] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 357.269] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 357.269] (--) NVIDIA(GPU-0):
[ 357.269] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 357.269] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 357.269] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 357.269] (--) NVIDIA(GPU-0):
[ 357.269] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 357.269] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 357.269] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 357.269] (--) NVIDIA(GPU-0):
[ 357.269] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 357.269] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 357.269] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 357.269] (--) NVIDIA(GPU-0):
[ 1142.647] (**) Option "fd" "37"
[ 1142.647] (II) event6 - Power Button: device removed
[ 1142.647] (**) Option "fd" "40"
[ 1142.647] (II) event4 - Power Button: device removed
[ 1142.647] (**) Option "fd" "41"
[ 1142.647] (II) event5 - Sleep Button: device removed
[ 1142.647] (**) Option "fd" "42"
[ 1142.647] (II) event0 - Holtek USB Gaming Mouse: device removed
[ 1142.647] (**) Option "fd" "43"
[ 1142.647] (**) Option "fd" "44"
[ 1142.647] (II) event2 - SONiX USB Keyboard: device removed
[ 1142.647] (**) Option "fd" "45"
[ 1142.647] (**) Option "fd" "43"
[ 1142.647] (II) event1 - Holtek USB Gaming Mouse: device removed
[ 1142.647] (**) Option "fd" "45"
[ 1142.647] (II) event3 - SONiX USB Keyboard: device removed
[ 1142.648] (II) UnloadModule: "libinput"
[ 1142.648] (II) systemd-logind: not releasing fd for 13:67, still in use
[ 1142.648] (II) UnloadModule: "libinput"
[ 1142.648] (II) systemd-logind: not releasing fd for 13:65, still in use
[ 1142.648] (II) UnloadModule: "libinput"
[ 1142.648] (II) systemd-logind: releasing fd for 13:67
[ 1142.700] (II) UnloadModule: "libinput"
[ 1142.700] (II) systemd-logind: releasing fd for 13:66
[ 1142.740] (II) UnloadModule: "libinput"
[ 1142.740] (II) systemd-logind: releasing fd for 13:65
[ 1142.810] (II) UnloadModule: "libinput"
[ 1142.810] (II) systemd-logind: releasing fd for 13:64
[ 1142.890] (II) UnloadModule: "libinput"
[ 1142.890] (II) systemd-logind: releasing fd for 13:69
[ 1142.950] (II) UnloadModule: "libinput"
[ 1142.950] (II) systemd-logind: releasing fd for 13:68
[ 1143.000] (II) UnloadModule: "libinput"
[ 1143.000] (II) systemd-logind: releasing fd for 13:70
[ 1143.291] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 1143.295] (II) Server terminated successfully (0). Closing log file.Offline
#6 2018-05-19 12:10:49
- Jagger
- Member
- Registered: 2018-03-04
- Posts: 31
Re: [SOLVED] Is there any solution for nvidia 396 screen tearring?
and journalctl -b
-- Logs begin at Tue 2018-05-08 16:33:52 CEST, end at Sat 2018-05-19 14:02:42 CEST. --
maj 19 13:42:15 bromba kernel: microcode: microcode updated early to revision 0x24, date = 2018-01-21
maj 19 13:42:15 bromba kernel: Linux version 4.14.41-1-lts (builduser@andyrtr) (gcc version 8.1.0 (GCC)) #1 SMP Wed May 16 15:10:39 CEST 2018
maj 19 13:42:15 bromba kernel: Command line: initrd=\intel-ucode.img initrd=\initramfs-linux-lts.img root=UUID=509d2661-7f03-4d3c-ba88-8a78992e94df rw
maj 19 13:42:15 bromba kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
maj 19 13:42:15 bromba kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
maj 19 13:42:15 bromba kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
maj 19 13:42:15 bromba kernel: x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
maj 19 13:42:15 bromba kernel: x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
maj 19 13:42:15 bromba kernel: e820: BIOS-provided physical RAM map:
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000baf26fff] usable
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x00000000baf27000-0x00000000baf2dfff] ACPI NVS
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x00000000baf2e000-0x00000000bbbd3fff] usable
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x00000000bbbd4000-0x00000000bc0b5fff] reserved
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x00000000bc0b6000-0x00000000ce3c5fff] usable
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x00000000ce3c6000-0x00000000ce456fff] reserved
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x00000000ce457000-0x00000000ce49dfff] usable
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x00000000ce49e000-0x00000000ce5d9fff] ACPI NVS
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x00000000ce5da000-0x00000000ceffefff] reserved
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x00000000cefff000-0x00000000ceffffff] usable
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
maj 19 13:42:15 bromba kernel: BIOS-e820: [mem 0x0000000100000000-0x000000042effffff] usable
maj 19 13:42:15 bromba kernel: NX (Execute Disable) protection: active
maj 19 13:42:15 bromba kernel: e820: update [mem 0xb89ff018-0xb8a20c57] usable ==> usable
maj 19 13:42:15 bromba kernel: e820: update [mem 0xb89ff018-0xb8a20c57] usable ==> usable
maj 19 13:42:15 bromba kernel: extended physical RAM map:
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x0000000000100000-0x00000000b89ff017] usable
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x00000000b89ff018-0x00000000b8a20c57] usable
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x00000000b8a20c58-0x00000000baf26fff] usable
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x00000000baf27000-0x00000000baf2dfff] ACPI NVS
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x00000000baf2e000-0x00000000bbbd3fff] usable
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x00000000bbbd4000-0x00000000bc0b5fff] reserved
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x00000000bc0b6000-0x00000000ce3c5fff] usable
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x00000000ce3c6000-0x00000000ce456fff] reserved
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x00000000ce457000-0x00000000ce49dfff] usable
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x00000000ce49e000-0x00000000ce5d9fff] ACPI NVS
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x00000000ce5da000-0x00000000ceffefff] reserved
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x00000000cefff000-0x00000000ceffffff] usable
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
maj 19 13:42:15 bromba kernel: reserve setup_data: [mem 0x0000000100000000-0x000000042effffff] usable
maj 19 13:42:15 bromba kernel: efi: EFI v2.31 by American Megatrends
maj 19 13:42:15 bromba kernel: efi: ACPI=0xce5a6000 ACPI 2.0=0xce5a6000 SMBIOS=0xcef79518
maj 19 13:42:15 bromba kernel: SMBIOS 2.8 present.
maj 19 13:42:15 bromba kernel: DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme9, BIOS P2.00 05/27/2016
maj 19 13:42:15 bromba kernel: tsc: Fast TSC calibration using PIT
maj 19 13:42:15 bromba kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
maj 19 13:42:15 bromba kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
maj 19 13:42:15 bromba kernel: e820: last_pfn = 0x42f000 max_arch_pfn = 0x400000000
maj 19 13:42:15 bromba kernel: MTRR default type: uncachable
maj 19 13:42:15 bromba kernel: MTRR fixed ranges enabled:
maj 19 13:42:15 bromba kernel: 00000-9FFFF write-back
maj 19 13:42:15 bromba kernel: A0000-EFFFF uncachable
maj 19 13:42:15 bromba kernel: F0000-FFFFF write-protect
maj 19 13:42:15 bromba kernel: MTRR variable ranges enabled:
maj 19 13:42:15 bromba kernel: 0 base 0000000000 mask 7C00000000 write-back
maj 19 13:42:15 bromba kernel: 1 base 0400000000 mask 7FE0000000 write-back
maj 19 13:42:15 bromba kernel: 2 base 0420000000 mask 7FF8000000 write-back
maj 19 13:42:15 bromba kernel: 3 base 0428000000 mask 7FFC000000 write-back
maj 19 13:42:15 bromba kernel: 4 base 042C000000 mask 7FFE000000 write-back
maj 19 13:42:15 bromba kernel: 5 base 042E000000 mask 7FFF000000 write-back
maj 19 13:42:15 bromba kernel: 6 base 00E0000000 mask 7FE0000000 uncachable
maj 19 13:42:15 bromba kernel: 7 base 00D0000000 mask 7FF0000000 uncachable
maj 19 13:42:15 bromba kernel: 8 disabled
maj 19 13:42:15 bromba kernel: 9 disabled
maj 19 13:42:15 bromba kernel: x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
maj 19 13:42:15 bromba kernel: e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
maj 19 13:42:15 bromba kernel: e820: last_pfn = 0xcf000 max_arch_pfn = 0x400000000
maj 19 13:42:15 bromba kernel: Scanning 1 areas for low memory corruption
maj 19 13:42:15 bromba kernel: Base memory trampoline at [ffff8bafc0098000] 98000 size 24576
maj 19 13:42:15 bromba kernel: Using GB pages for direct mapping
maj 19 13:42:15 bromba kernel: BRK [0x3d963c000, 0x3d963cfff] PGTABLE
maj 19 13:42:15 bromba kernel: BRK [0x3d963d000, 0x3d963dfff] PGTABLE
maj 19 13:42:15 bromba kernel: BRK [0x3d963e000, 0x3d963efff] PGTABLE
maj 19 13:42:15 bromba kernel: BRK [0x3d963f000, 0x3d963ffff] PGTABLE
maj 19 13:42:15 bromba kernel: BRK [0x3d9640000, 0x3d9640fff] PGTABLE
maj 19 13:42:15 bromba kernel: BRK [0x3d9641000, 0x3d9641fff] PGTABLE
maj 19 13:42:15 bromba kernel: BRK [0x3d9642000, 0x3d9642fff] PGTABLE
maj 19 13:42:15 bromba kernel: BRK [0x3d9643000, 0x3d9643fff] PGTABLE
maj 19 13:42:15 bromba kernel: BRK [0x3d9644000, 0x3d9644fff] PGTABLE
maj 19 13:42:15 bromba kernel: BRK [0x3d9645000, 0x3d9645fff] PGTABLE
maj 19 13:42:15 bromba kernel: BRK [0x3d9646000, 0x3d9646fff] PGTABLE
maj 19 13:42:15 bromba kernel: BRK [0x3d9647000, 0x3d9647fff] PGTABLE
maj 19 13:42:15 bromba kernel: Secure boot disabled
maj 19 13:42:15 bromba kernel: RAMDISK: [mem 0x7f73e000-0x7fffefff]
maj 19 13:42:15 bromba kernel: ACPI: Early table checksum verification disabled
maj 19 13:42:15 bromba kernel: ACPI: RSDP 0x00000000CE5A6000 000024 (v02 ALASKA)
maj 19 13:42:15 bromba kernel: ACPI: XSDT 0x00000000CE5A6088 000094 (v01 ALASKA A M I 01072009 AMI 00010013)
maj 19 13:42:15 bromba kernel: ACPI: FACP 0x00000000CE5B7500 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
maj 19 13:42:15 bromba kernel: ACPI: DSDT 0x00000000CE5A61B8 011341 (v02 ALASKA A M I 00000200 INTL 20120711)
maj 19 13:42:15 bromba kernel: ACPI: FACS 0x00000000CE5D9F80 000040
maj 19 13:42:15 bromba kernel: ACPI: APIC 0x00000000CE5B7610 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
maj 19 13:42:15 bromba kernel: ACPI: FPDT 0x00000000CE5B76A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
maj 19 13:42:15 bromba kernel: ACPI: SSDT 0x00000000CE5B76F0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
maj 19 13:42:15 bromba kernel: ACPI: SSDT 0x00000000CE5B7C30 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
maj 19 13:42:15 bromba kernel: ACPI: SSDT 0x00000000CE5B87A8 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20051117)
maj 19 13:42:15 bromba kernel: ACPI: MCFG 0x00000000CE5B8970 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
maj 19 13:42:15 bromba kernel: ACPI: HPET 0x00000000CE5B89B0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
maj 19 13:42:15 bromba kernel: ACPI: SSDT 0x00000000CE5B89E8 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
maj 19 13:42:15 bromba kernel: ACPI: SSDT 0x00000000CE5B8D58 005B5E (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
maj 19 13:42:15 bromba kernel: ACPI: AAFT 0x00000000CE5BE8B8 0005A0 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
maj 19 13:42:15 bromba kernel: ACPI: UEFI 0x00000000CE5BEE58 000042 (v01 ALASKA A M I 01072009 00000000)
maj 19 13:42:15 bromba kernel: ACPI: BGRT 0x00000000CE5BEEA0 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
maj 19 13:42:15 bromba kernel: ACPI: SSDT 0x00000000CE5BEED8 000579 (v01 Intel_ IsctTabl 00001000 INTL 20120711)
maj 19 13:42:15 bromba kernel: ACPI: Local APIC address 0xfee00000
maj 19 13:42:15 bromba kernel: No NUMA configuration found
maj 19 13:42:15 bromba kernel: Faking a node at [mem 0x0000000000000000-0x000000042effffff]
maj 19 13:42:15 bromba kernel: NODE_DATA(0) allocated [mem 0x42effb000-0x42effefff]
maj 19 13:42:15 bromba kernel: Zone ranges:
maj 19 13:42:15 bromba kernel: DMA [mem 0x0000000000001000-0x0000000000ffffff]
maj 19 13:42:15 bromba kernel: DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
maj 19 13:42:15 bromba kernel: Normal [mem 0x0000000100000000-0x000000042effffff]
maj 19 13:42:15 bromba kernel: Device empty
maj 19 13:42:15 bromba kernel: Movable zone start for each node
maj 19 13:42:15 bromba kernel: Early memory node ranges
maj 19 13:42:15 bromba kernel: node 0: [mem 0x0000000000001000-0x0000000000057fff]
maj 19 13:42:15 bromba kernel: node 0: [mem 0x0000000000059000-0x000000000009dfff]
maj 19 13:42:15 bromba kernel: node 0: [mem 0x0000000000100000-0x00000000baf26fff]
maj 19 13:42:15 bromba kernel: node 0: [mem 0x00000000baf2e000-0x00000000bbbd3fff]
maj 19 13:42:15 bromba kernel: node 0: [mem 0x00000000bc0b6000-0x00000000ce3c5fff]
maj 19 13:42:15 bromba kernel: node 0: [mem 0x00000000ce457000-0x00000000ce49dfff]
maj 19 13:42:15 bromba kernel: node 0: [mem 0x00000000cefff000-0x00000000ceffffff]
maj 19 13:42:15 bromba kernel: node 0: [mem 0x0000000100000000-0x000000042effffff]
maj 19 13:42:15 bromba kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000042effffff]
maj 19 13:42:15 bromba kernel: On node 0 totalpages: 4181697
maj 19 13:42:15 bromba kernel: DMA zone: 64 pages used for memmap
maj 19 13:42:15 bromba kernel: DMA zone: 21 pages reserved
maj 19 13:42:15 bromba kernel: DMA zone: 3996 pages, LIFO batch:0
maj 19 13:42:15 bromba kernel: DMA32 zone: 13117 pages used for memmap
maj 19 13:42:15 bromba kernel: DMA32 zone: 839461 pages, LIFO batch:31
maj 19 13:42:15 bromba kernel: Normal zone: 52160 pages used for memmap
maj 19 13:42:15 bromba kernel: Normal zone: 3338240 pages, LIFO batch:31
maj 19 13:42:15 bromba kernel: ACPI: PM-Timer IO Port: 0x1808
maj 19 13:42:15 bromba kernel: ACPI: Local APIC address 0xfee00000
maj 19 13:42:15 bromba kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
maj 19 13:42:15 bromba kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
maj 19 13:42:15 bromba kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
maj 19 13:42:15 bromba kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
maj 19 13:42:15 bromba kernel: ACPI: IRQ0 used by override.
maj 19 13:42:15 bromba kernel: ACPI: IRQ9 used by override.
maj 19 13:42:15 bromba kernel: Using ACPI (MADT) for SMP configuration information
maj 19 13:42:15 bromba kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
maj 19 13:42:15 bromba kernel: smpboot: Allowing 8 CPUs, 0 hotplug CPUs
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0xb89ff000-0xb89fffff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0xb8a20000-0xb8a20fff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0xbaf27000-0xbaf2dfff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0xbbbd4000-0xbc0b5fff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0xce3c6000-0xce456fff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0xce49e000-0xce5d9fff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0xce5da000-0xceffefff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0xcf000000-0xefffffff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
maj 19 13:42:15 bromba kernel: PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
maj 19 13:42:15 bromba kernel: e820: [mem 0xcf000000-0xefffffff] available for PCI devices
maj 19 13:42:15 bromba kernel: Booting paravirtualized kernel on bare hardware
maj 19 13:42:15 bromba kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
maj 19 13:42:15 bromba kernel: random: get_random_bytes called from start_kernel+0x93/0x4cc with crng_init=0
maj 19 13:42:15 bromba kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
maj 19 13:42:15 bromba kernel: percpu: Embedded 42 pages/cpu @ffff8bb3eec00000 s132440 r8192 d31400 u262144
maj 19 13:42:15 bromba kernel: pcpu-alloc: s132440 r8192 d31400 u262144 alloc=1*2097152
maj 19 13:42:15 bromba kernel: pcpu-alloc: [0] 0 1 2 3 4 5 6 7
maj 19 13:42:15 bromba kernel: Built 1 zonelists, mobility grouping on. Total pages: 4116335
maj 19 13:42:15 bromba kernel: Policy zone: Normal
maj 19 13:42:15 bromba kernel: Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux-lts.img root=UUID=509d2661-7f03-4d3c-ba88-8a78992e94df rw
maj 19 13:42:15 bromba kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
maj 19 13:42:15 bromba kernel: Calgary: detecting Calgary via BIOS EBDA area
maj 19 13:42:15 bromba kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
maj 19 13:42:15 bromba kernel: Memory: 16302388K/16726788K available (10252K kernel code, 1150K rwdata, 2828K rodata, 1412K init, 988K bss, 424400K reserved, 0K cma-reserved)
maj 19 13:42:15 bromba kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
maj 19 13:42:15 bromba kernel: Kernel/User page tables isolation: enabled
maj 19 13:42:15 bromba kernel: ftrace: allocating 29093 entries in 114 pages
maj 19 13:42:15 bromba kernel: Hierarchical RCU implementation.
maj 19 13:42:15 bromba kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
maj 19 13:42:15 bromba kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
maj 19 13:42:15 bromba kernel: NR_IRQS: 8448, nr_irqs: 488, preallocated irqs: 16
maj 19 13:42:15 bromba kernel: Console: colour dummy device 80x25
maj 19 13:42:15 bromba kernel: console [tty0] enabled
maj 19 13:42:15 bromba kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
maj 19 13:42:15 bromba kernel: hpet clockevent registered
maj 19 13:42:15 bromba kernel: tsc: Fast TSC calibration using PIT
maj 19 13:42:15 bromba kernel: spurious 8259A interrupt: IRQ7.
maj 19 13:42:15 bromba kernel: tsc: Detected 3990.732 MHz processor
maj 19 13:42:15 bromba kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 7981.46 BogoMIPS (lpj=39907320)
maj 19 13:42:15 bromba kernel: pid_max: default: 32768 minimum: 301
maj 19 13:42:15 bromba kernel: ACPI: Core revision 20170728
maj 19 13:42:15 bromba kernel: ACPI: 7 ACPI AML tables successfully acquired and loaded
maj 19 13:42:15 bromba kernel: Security Framework initialized
maj 19 13:42:15 bromba kernel: Yama: becoming mindful.
maj 19 13:42:15 bromba kernel: Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
maj 19 13:42:15 bromba kernel: Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
maj 19 13:42:15 bromba kernel: Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
maj 19 13:42:15 bromba kernel: Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
maj 19 13:42:15 bromba kernel: CPU: Physical Processor ID: 0
maj 19 13:42:15 bromba kernel: CPU: Processor Core ID: 0
maj 19 13:42:15 bromba kernel: mce: CPU supports 9 MCE banks
maj 19 13:42:15 bromba kernel: CPU0: Thermal monitoring enabled (TM1)
maj 19 13:42:15 bromba kernel: process: using mwait in idle threads
maj 19 13:42:15 bromba kernel: Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
maj 19 13:42:15 bromba kernel: Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
maj 19 13:42:15 bromba kernel: Spectre V2 : Mitigation: Full generic retpoline
maj 19 13:42:15 bromba kernel: Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
maj 19 13:42:15 bromba kernel: Spectre V2 : Enabling Restricted Speculation for firmware calls
maj 19 13:42:15 bromba kernel: Freeing SMP alternatives memory: 28K
maj 19 13:42:15 bromba kernel: smpboot: Max logical packages: 2
maj 19 13:42:15 bromba kernel: x2apic: IRQ remapping doesn't support X2APIC mode
maj 19 13:42:15 bromba kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
maj 19 13:42:15 bromba kernel: TSC deadline timer enabled
maj 19 13:42:15 bromba kernel: smpboot: CPU0: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (family: 0x6, model: 0x3c, stepping: 0x3)
maj 19 13:42:15 bromba kernel: Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
maj 19 13:42:15 bromba kernel: ... version: 3
maj 19 13:42:15 bromba kernel: ... bit width: 48
maj 19 13:42:15 bromba kernel: ... generic registers: 4
maj 19 13:42:15 bromba kernel: ... value mask: 0000ffffffffffff
maj 19 13:42:15 bromba kernel: ... max period: 00007fffffffffff
maj 19 13:42:15 bromba kernel: ... fixed-purpose events: 3
maj 19 13:42:15 bromba kernel: ... event mask: 000000070000000f
maj 19 13:42:15 bromba kernel: Hierarchical SRCU implementation.
maj 19 13:42:15 bromba kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
maj 19 13:42:15 bromba kernel: smp: Bringing up secondary CPUs ...
maj 19 13:42:15 bromba kernel: x86: Booting SMP configuration:
maj 19 13:42:15 bromba kernel: .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
maj 19 13:42:15 bromba kernel: smp: Brought up 1 node, 8 CPUs
maj 19 13:42:15 bromba kernel: smpboot: Total of 8 processors activated (63851.71 BogoMIPS)
maj 19 13:42:15 bromba kernel: devtmpfs: initialized
maj 19 13:42:15 bromba kernel: x86/mm: Memory block size: 128MB
maj 19 13:42:15 bromba kernel: PM: Registering ACPI NVS region [mem 0xbaf27000-0xbaf2dfff] (28672 bytes)
maj 19 13:42:15 bromba kernel: PM: Registering ACPI NVS region [mem 0xce49e000-0xce5d9fff] (1294336 bytes)
maj 19 13:42:15 bromba kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
maj 19 13:42:15 bromba kernel: futex hash table entries: 2048 (order: 5, 131072 bytes)
maj 19 13:42:15 bromba kernel: pinctrl core: initialized pinctrl subsystem
maj 19 13:42:15 bromba kernel: RTC time: 11:42:13, date: 05/19/18
maj 19 13:42:15 bromba kernel: NET: Registered protocol family 16
maj 19 13:42:15 bromba kernel: cpuidle: using governor ladder
maj 19 13:42:15 bromba kernel: cpuidle: using governor menu
maj 19 13:42:15 bromba kernel: ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
maj 19 13:42:15 bromba kernel: ACPI: bus type PCI registered
maj 19 13:42:15 bromba kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
maj 19 13:42:15 bromba kernel: PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
maj 19 13:42:15 bromba kernel: PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
maj 19 13:42:15 bromba kernel: pmd_set_huge: Cannot satisfy [mem 0xf0000000-0xf0200000] with a huge-page mapping due to MTRR override.
maj 19 13:42:15 bromba kernel: PCI: Using configuration type 1 for base access
maj 19 13:42:15 bromba kernel: core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
maj 19 13:42:15 bromba kernel: HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
maj 19 13:42:15 bromba kernel: HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
maj 19 13:42:15 bromba kernel: ACPI: Added _OSI(Module Device)
maj 19 13:42:15 bromba kernel: ACPI: Added _OSI(Processor Device)
maj 19 13:42:15 bromba kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
maj 19 13:42:15 bromba kernel: ACPI: Added _OSI(Processor Aggregator Device)
maj 19 13:42:15 bromba kernel: ACPI: Executed 15 blocks of module-level executable AML code
maj 19 13:42:15 bromba kernel: ACPI: Dynamic OEM Table Load:
maj 19 13:42:15 bromba kernel: ACPI: SSDT 0xFFFF8BB3DBCD7C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
maj 19 13:42:15 bromba kernel: ACPI: Dynamic OEM Table Load:
maj 19 13:42:15 bromba kernel: ACPI: SSDT 0xFFFF8BB3DC1A9800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
maj 19 13:42:15 bromba kernel: ACPI: Dynamic OEM Table Load:
maj 19 13:42:15 bromba kernel: ACPI: SSDT 0xFFFF8BB3DBD1BC00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
maj 19 13:42:15 bromba kernel: ACPI: Interpreter enabled
maj 19 13:42:15 bromba kernel: ACPI: (supports S0 S3 S4 S5)
maj 19 13:42:15 bromba kernel: ACPI: Using IOAPIC for interrupt routing
maj 19 13:42:15 bromba kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
maj 19 13:42:15 bromba kernel: ACPI: GPE 0x1E active on init
maj 19 13:42:15 bromba kernel: ACPI: Enabled 10 GPEs in block 00 to 3F
maj 19 13:42:15 bromba kernel: ACPI: Power Resource [PG00] (on)
maj 19 13:42:15 bromba kernel: ACPI: Power Resource [PG01] (on)
maj 19 13:42:15 bromba kernel: ACPI: Power Resource [PG02] (on)
maj 19 13:42:15 bromba kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
maj 19 13:42:15 bromba kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
maj 19 13:42:15 bromba kernel: acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
maj 19 13:42:15 bromba kernel: acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
maj 19 13:42:15 bromba kernel: acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
maj 19 13:42:15 bromba kernel: PCI host bridge to bus 0000:00
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: root bus resource [bus 00-7e]
maj 19 13:42:15 bromba kernel: pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
maj 19 13:42:15 bromba kernel: pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
maj 19 13:42:15 bromba kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400
maj 19 13:42:15 bromba kernel: pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:00:01.2: [8086:0c09] type 01 class 0x060400
maj 19 13:42:15 bromba kernel: pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
maj 19 13:42:15 bromba kernel: pci 0000:00:14.0: reg 0x10: [mem 0xef820000-0xef82ffff 64bit]
maj 19 13:42:15 bromba kernel: pci 0000:00:14.0: PME# supported from D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
maj 19 13:42:15 bromba kernel: pci 0000:00:16.0: reg 0x10: [mem 0xef83a000-0xef83a00f 64bit]
maj 19 13:42:15 bromba kernel: pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
maj 19 13:42:15 bromba kernel: pci 0000:00:19.0: reg 0x10: [mem 0xef800000-0xef81ffff]
maj 19 13:42:15 bromba kernel: pci 0000:00:19.0: reg 0x14: [mem 0xef838000-0xef838fff]
maj 19 13:42:15 bromba kernel: pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
maj 19 13:42:15 bromba kernel: pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
maj 19 13:42:15 bromba kernel: pci 0000:00:1a.0: reg 0x10: [mem 0xef837000-0xef8373ff]
maj 19 13:42:15 bromba kernel: pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
maj 19 13:42:15 bromba kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xef830000-0xef833fff 64bit]
maj 19 13:42:15 bromba kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
maj 19 13:42:15 bromba kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:00:1c.2: [8086:8c94] type 01 class 0x060400
maj 19 13:42:15 bromba kernel: pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
maj 19 13:42:15 bromba kernel: pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
maj 19 13:42:15 bromba kernel: pci 0000:00:1d.0: reg 0x10: [mem 0xef836000-0xef8363ff]
maj 19 13:42:15 bromba kernel: pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
maj 19 13:42:15 bromba kernel: pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
maj 19 13:42:15 bromba kernel: pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
maj 19 13:42:15 bromba kernel: pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
maj 19 13:42:15 bromba kernel: pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
maj 19 13:42:15 bromba kernel: pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
maj 19 13:42:15 bromba kernel: pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
maj 19 13:42:15 bromba kernel: pci 0000:00:1f.2: reg 0x24: [mem 0xef835000-0xef8357ff]
maj 19 13:42:15 bromba kernel: pci 0000:00:1f.2: PME# supported from D3hot
maj 19 13:42:15 bromba kernel: pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
maj 19 13:42:15 bromba kernel: pci 0000:00:1f.3: reg 0x10: [mem 0xef834000-0xef8340ff 64bit]
maj 19 13:42:15 bromba kernel: pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
maj 19 13:42:15 bromba kernel: pci 0000:01:00.0: [10b5:8747] type 01 class 0x060400
maj 19 13:42:15 bromba kernel: pci 0000:01:00.0: reg 0x10: [mem 0xef300000-0xef33ffff]
maj 19 13:42:15 bromba kernel: pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:00:01.0: PCI bridge to [bus 01-06]
maj 19 13:42:15 bromba kernel: pci 0000:00:01.0: bridge window [io 0xc000-0xdfff]
maj 19 13:42:15 bromba kernel: pci 0000:00:01.0: bridge window [mem 0xee000000-0xef3fffff]
maj 19 13:42:15 bromba kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
maj 19 13:42:15 bromba kernel: pci 0000:02:08.0: [10b5:8747] type 01 class 0x060400
maj 19 13:42:15 bromba kernel: pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:02:09.0: [10b5:8747] type 01 class 0x060400
maj 19 13:42:15 bromba kernel: pci 0000:02:09.0: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:02:10.0: [10b5:8747] type 01 class 0x060400
maj 19 13:42:15 bromba kernel: pci 0000:02:10.0: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:02:11.0: [10b5:8747] type 01 class 0x060400
maj 19 13:42:15 bromba kernel: pci 0000:02:11.0: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:01:00.0: PCI bridge to [bus 02-06]
maj 19 13:42:15 bromba kernel: pci 0000:01:00.0: bridge window [io 0xc000-0xdfff]
maj 19 13:42:15 bromba kernel: pci 0000:01:00.0: bridge window [mem 0xee000000-0xef2fffff]
maj 19 13:42:15 bromba kernel: pci 0000:01:00.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
maj 19 13:42:15 bromba kernel: pci 0000:03:00.0: [10de:13c2] type 00 class 0x030000
maj 19 13:42:15 bromba kernel: pci 0000:03:00.0: reg 0x10: [mem 0xee000000-0xeeffffff]
maj 19 13:42:15 bromba kernel: pci 0000:03:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
maj 19 13:42:15 bromba kernel: pci 0000:03:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
maj 19 13:42:15 bromba kernel: pci 0000:03:00.0: reg 0x24: [io 0xd000-0xd07f]
maj 19 13:42:15 bromba kernel: pci 0000:03:00.0: reg 0x30: [mem 0xef000000-0xef07ffff pref]
maj 19 13:42:15 bromba kernel: pci 0000:03:00.0: BAR 1: assigned to efifb
maj 19 13:42:15 bromba kernel: pci 0000:03:00.1: [10de:0fbb] type 00 class 0x040300
maj 19 13:42:15 bromba kernel: pci 0000:03:00.1: reg 0x10: [mem 0xef080000-0xef083fff]
maj 19 13:42:15 bromba kernel: pci 0000:02:08.0: PCI bridge to [bus 03]
maj 19 13:42:15 bromba kernel: pci 0000:02:08.0: bridge window [io 0xd000-0xdfff]
maj 19 13:42:15 bromba kernel: pci 0000:02:08.0: bridge window [mem 0xee000000-0xef0fffff]
maj 19 13:42:15 bromba kernel: pci 0000:02:08.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
maj 19 13:42:15 bromba kernel: pci 0000:02:09.0: PCI bridge to [bus 04]
maj 19 13:42:15 bromba kernel: pci 0000:05:00.0: [144d:a802] type 00 class 0x010802
maj 19 13:42:15 bromba kernel: pci 0000:05:00.0: reg 0x10: [mem 0xef200000-0xef203fff 64bit]
maj 19 13:42:15 bromba kernel: pci 0000:05:00.0: reg 0x18: [io 0xc000-0xc0ff]
maj 19 13:42:15 bromba kernel: pci 0000:02:10.0: PCI bridge to [bus 05]
maj 19 13:42:15 bromba kernel: pci 0000:02:10.0: bridge window [io 0xc000-0xcfff]
maj 19 13:42:15 bromba kernel: pci 0000:02:10.0: bridge window [mem 0xef200000-0xef2fffff]
maj 19 13:42:15 bromba kernel: pci 0000:02:11.0: PCI bridge to [bus 06]
maj 19 13:42:15 bromba kernel: pci 0000:00:01.1: PCI bridge to [bus 07]
maj 19 13:42:15 bromba kernel: pci 0000:08:00.0: [144d:a800] type 00 class 0x010601
maj 19 13:42:15 bromba kernel: pci 0000:08:00.0: reg 0x24: [mem 0xef710000-0xef711fff]
maj 19 13:42:15 bromba kernel: pci 0000:08:00.0: reg 0x30: [mem 0xef700000-0xef70ffff pref]
maj 19 13:42:15 bromba kernel: pci 0000:08:00.0: PME# supported from D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:00:01.2: PCI bridge to [bus 08]
maj 19 13:42:15 bromba kernel: pci 0000:00:01.2: bridge window [mem 0xef700000-0xef7fffff]
maj 19 13:42:15 bromba kernel: acpiphp: Slot [1] registered
maj 19 13:42:15 bromba kernel: pci 0000:00:1c.0: PCI bridge to [bus 09]
maj 19 13:42:15 bromba kernel: pci 0000:0a:00.0: [1b21:1184] type 01 class 0x060400
maj 19 13:42:15 bromba kernel: pci 0000:0a:00.0: enabling Extended Tags
maj 19 13:42:15 bromba kernel: pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:00:1c.2: PCI bridge to [bus 0a-0f]
maj 19 13:42:15 bromba kernel: pci 0000:00:1c.2: bridge window [io 0xa000-0xbfff]
maj 19 13:42:15 bromba kernel: pci 0000:00:1c.2: bridge window [mem 0xef400000-0xef5fffff]
maj 19 13:42:15 bromba kernel: pci 0000:0b:01.0: [1b21:1184] type 01 class 0x060400
maj 19 13:42:15 bromba kernel: pci 0000:0b:01.0: enabling Extended Tags
maj 19 13:42:15 bromba kernel: pci 0000:0b:01.0: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:0b:03.0: [1b21:1184] type 01 class 0x060400
maj 19 13:42:15 bromba kernel: pci 0000:0b:03.0: enabling Extended Tags
maj 19 13:42:15 bromba kernel: pci 0000:0b:03.0: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:0b:05.0: [1b21:1184] type 01 class 0x060400
maj 19 13:42:15 bromba kernel: pci 0000:0b:05.0: enabling Extended Tags
maj 19 13:42:15 bromba kernel: pci 0000:0b:05.0: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:0b:07.0: [1b21:1184] type 01 class 0x060400
maj 19 13:42:15 bromba kernel: pci 0000:0b:07.0: enabling Extended Tags
maj 19 13:42:15 bromba kernel: pci 0000:0b:07.0: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:0a:00.0: PCI bridge to [bus 0b-0f]
maj 19 13:42:15 bromba kernel: pci 0000:0a:00.0: bridge window [io 0xa000-0xbfff]
maj 19 13:42:15 bromba kernel: pci 0000:0a:00.0: bridge window [mem 0xef400000-0xef5fffff]
maj 19 13:42:15 bromba kernel: pci 0000:0b:01.0: PCI bridge to [bus 0c]
maj 19 13:42:15 bromba kernel: pci 0000:0d:00.0: [1b21:0612] type 00 class 0x010601
maj 19 13:42:15 bromba kernel: pci 0000:0d:00.0: reg 0x10: [io 0xb050-0xb057]
maj 19 13:42:15 bromba kernel: pci 0000:0d:00.0: reg 0x14: [io 0xb040-0xb043]
maj 19 13:42:15 bromba kernel: pci 0000:0d:00.0: reg 0x18: [io 0xb030-0xb037]
maj 19 13:42:15 bromba kernel: pci 0000:0d:00.0: reg 0x1c: [io 0xb020-0xb023]
maj 19 13:42:15 bromba kernel: pci 0000:0d:00.0: reg 0x20: [io 0xb000-0xb01f]
maj 19 13:42:15 bromba kernel: pci 0000:0d:00.0: reg 0x24: [mem 0xef500000-0xef5001ff]
maj 19 13:42:15 bromba kernel: pci 0000:0b:03.0: PCI bridge to [bus 0d]
maj 19 13:42:15 bromba kernel: pci 0000:0b:03.0: bridge window [io 0xb000-0xbfff]
maj 19 13:42:15 bromba kernel: pci 0000:0b:03.0: bridge window [mem 0xef500000-0xef5fffff]
maj 19 13:42:15 bromba kernel: pci 0000:0b:05.0: PCI bridge to [bus 0e]
maj 19 13:42:15 bromba kernel: pci 0000:0f:00.0: [1b21:0612] type 00 class 0x010601
maj 19 13:42:15 bromba kernel: pci 0000:0f:00.0: reg 0x10: [io 0xa050-0xa057]
maj 19 13:42:15 bromba kernel: pci 0000:0f:00.0: reg 0x14: [io 0xa040-0xa043]
maj 19 13:42:15 bromba kernel: pci 0000:0f:00.0: reg 0x18: [io 0xa030-0xa037]
maj 19 13:42:15 bromba kernel: pci 0000:0f:00.0: reg 0x1c: [io 0xa020-0xa023]
maj 19 13:42:15 bromba kernel: pci 0000:0f:00.0: reg 0x20: [io 0xa000-0xa01f]
maj 19 13:42:15 bromba kernel: pci 0000:0f:00.0: reg 0x24: [mem 0xef400000-0xef4001ff]
maj 19 13:42:15 bromba kernel: pci 0000:0b:07.0: PCI bridge to [bus 0f]
maj 19 13:42:15 bromba kernel: pci 0000:0b:07.0: bridge window [io 0xa000-0xafff]
maj 19 13:42:15 bromba kernel: pci 0000:0b:07.0: bridge window [mem 0xef400000-0xef4fffff]
maj 19 13:42:15 bromba kernel: pci 0000:10:00.0: [8086:1539] type 00 class 0x020000
maj 19 13:42:15 bromba kernel: pci 0000:10:00.0: reg 0x10: [mem 0xef600000-0xef61ffff]
maj 19 13:42:15 bromba kernel: pci 0000:10:00.0: reg 0x18: [io 0xe000-0xe01f]
maj 19 13:42:15 bromba kernel: pci 0000:10:00.0: reg 0x1c: [mem 0xef620000-0xef623fff]
maj 19 13:42:15 bromba kernel: pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
maj 19 13:42:15 bromba kernel: pci 0000:00:1c.3: PCI bridge to [bus 10]
maj 19 13:42:15 bromba kernel: pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
maj 19 13:42:15 bromba kernel: pci 0000:00:1c.3: bridge window [mem 0xef600000-0xef6fffff]
maj 19 13:42:15 bromba kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
maj 19 13:42:15 bromba kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
maj 19 13:42:15 bromba kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
maj 19 13:42:15 bromba kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
maj 19 13:42:15 bromba kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
maj 19 13:42:15 bromba kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
maj 19 13:42:15 bromba kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
maj 19 13:42:15 bromba kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
maj 19 13:42:15 bromba kernel: pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
maj 19 13:42:15 bromba kernel: pci 0000:03:00.0: vgaarb: setting as boot device
maj 19 13:42:15 bromba kernel: pci 0000:03:00.0: vgaarb: bridge control possible
maj 19 13:42:15 bromba kernel: vgaarb: loaded
maj 19 13:42:15 bromba kernel: EDAC MC: Ver: 3.0.0
maj 19 13:42:15 bromba kernel: Registered efivars operations
maj 19 13:42:15 bromba kernel: PCI: Using ACPI for IRQ routing
maj 19 13:42:15 bromba kernel: PCI: pci_cache_line_size set to 64 bytes
maj 19 13:42:15 bromba kernel: e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
maj 19 13:42:15 bromba kernel: e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
maj 19 13:42:15 bromba kernel: e820: reserve RAM buffer [mem 0xb89ff018-0xbbffffff]
maj 19 13:42:15 bromba kernel: e820: reserve RAM buffer [mem 0xbaf27000-0xbbffffff]
maj 19 13:42:15 bromba kernel: e820: reserve RAM buffer [mem 0xbbbd4000-0xbbffffff]
maj 19 13:42:15 bromba kernel: e820: reserve RAM buffer [mem 0xce3c6000-0xcfffffff]
maj 19 13:42:15 bromba kernel: e820: reserve RAM buffer [mem 0xce49e000-0xcfffffff]
maj 19 13:42:15 bromba kernel: e820: reserve RAM buffer [mem 0xcf000000-0xcfffffff]
maj 19 13:42:15 bromba kernel: e820: reserve RAM buffer [mem 0x42f000000-0x42fffffff]
maj 19 13:42:15 bromba kernel: NetLabel: Initializing
maj 19 13:42:15 bromba kernel: NetLabel: domain hash size = 128
maj 19 13:42:15 bromba kernel: NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
maj 19 13:42:15 bromba kernel: NetLabel: unlabeled traffic allowed by default
maj 19 13:42:15 bromba kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
maj 19 13:42:15 bromba kernel: hpet0: 8 comparators, 64-bit 14.318180 MHz counter
maj 19 13:42:15 bromba kernel: clocksource: Switched to clocksource hpet
maj 19 13:42:15 bromba kernel: VFS: Disk quotas dquot_6.6.0
maj 19 13:42:15 bromba kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
maj 19 13:42:15 bromba kernel: pnp: PnP ACPI init
maj 19 13:42:15 bromba kernel: system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
maj 19 13:42:15 bromba kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
maj 19 13:42:15 bromba kernel: system 00:01: [io 0x0800-0x087f] has been reserved
maj 19 13:42:15 bromba kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
maj 19 13:42:15 bromba kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
maj 19 13:42:15 bromba kernel: system 00:03: [io 0x1854-0x1857] has been reserved
maj 19 13:42:15 bromba kernel: system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
maj 19 13:42:15 bromba kernel: system 00:04: [io 0x0290-0x029f] has been reserved
maj 19 13:42:15 bromba kernel: system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
maj 19 13:42:15 bromba kernel: system 00:05: [io 0x04d0-0x04d1] has been reserved
maj 19 13:42:15 bromba kernel: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
maj 19 13:42:15 bromba kernel: pnp 00:06: [dma 0 disabled]
maj 19 13:42:15 bromba kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
maj 19 13:42:15 bromba kernel: system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
maj 19 13:42:15 bromba kernel: system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
maj 19 13:42:15 bromba kernel: system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
maj 19 13:42:15 bromba kernel: system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
maj 19 13:42:15 bromba kernel: system 00:07: [mem 0xf0000000-0xf7ffffff] has been reserved
maj 19 13:42:15 bromba kernel: system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
maj 19 13:42:15 bromba kernel: system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
maj 19 13:42:15 bromba kernel: system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
maj 19 13:42:15 bromba kernel: system 00:07: [mem 0xff000000-0xffffffff] has been reserved
maj 19 13:42:15 bromba kernel: system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
maj 19 13:42:15 bromba kernel: system 00:07: [mem 0xeffe0000-0xeffeffff] has been reserved
maj 19 13:42:15 bromba kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
maj 19 13:42:15 bromba kernel: pnp: PnP ACPI: found 8 devices
maj 19 13:42:15 bromba kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
maj 19 13:42:15 bromba kernel: pci 0000:02:08.0: PCI bridge to [bus 03]
maj 19 13:42:15 bromba kernel: pci 0000:02:08.0: bridge window [io 0xd000-0xdfff]
maj 19 13:42:15 bromba kernel: pci 0000:02:08.0: bridge window [mem 0xee000000-0xef0fffff]
maj 19 13:42:15 bromba kernel: pci 0000:02:08.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
maj 19 13:42:15 bromba kernel: pci 0000:02:09.0: PCI bridge to [bus 04]
maj 19 13:42:15 bromba kernel: pci 0000:02:10.0: PCI bridge to [bus 05]
maj 19 13:42:15 bromba kernel: pci 0000:02:10.0: bridge window [io 0xc000-0xcfff]
maj 19 13:42:15 bromba kernel: pci 0000:02:10.0: bridge window [mem 0xef200000-0xef2fffff]
maj 19 13:42:15 bromba kernel: pci 0000:02:11.0: PCI bridge to [bus 06]
maj 19 13:42:15 bromba kernel: pci 0000:01:00.0: PCI bridge to [bus 02-06]
maj 19 13:42:15 bromba kernel: pci 0000:01:00.0: bridge window [io 0xc000-0xdfff]
maj 19 13:42:15 bromba kernel: pci 0000:01:00.0: bridge window [mem 0xee000000-0xef2fffff]
maj 19 13:42:15 bromba kernel: pci 0000:01:00.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
maj 19 13:42:15 bromba kernel: pci 0000:00:01.0: PCI bridge to [bus 01-06]
maj 19 13:42:15 bromba kernel: pci 0000:00:01.0: bridge window [io 0xc000-0xdfff]
maj 19 13:42:15 bromba kernel: pci 0000:00:01.0: bridge window [mem 0xee000000-0xef3fffff]
maj 19 13:42:15 bromba kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
maj 19 13:42:15 bromba kernel: pci 0000:00:01.1: PCI bridge to [bus 07]
maj 19 13:42:15 bromba kernel: pci 0000:00:01.2: PCI bridge to [bus 08]
maj 19 13:42:15 bromba kernel: pci 0000:00:01.2: bridge window [mem 0xef700000-0xef7fffff]
maj 19 13:42:15 bromba kernel: pci 0000:00:1c.0: PCI bridge to [bus 09]
maj 19 13:42:15 bromba kernel: pci 0000:0b:01.0: PCI bridge to [bus 0c]
maj 19 13:42:15 bromba kernel: pci 0000:0b:03.0: PCI bridge to [bus 0d]
maj 19 13:42:15 bromba kernel: pci 0000:0b:03.0: bridge window [io 0xb000-0xbfff]
maj 19 13:42:15 bromba kernel: pci 0000:0b:03.0: bridge window [mem 0xef500000-0xef5fffff]
maj 19 13:42:15 bromba kernel: pci 0000:0b:05.0: PCI bridge to [bus 0e]
maj 19 13:42:15 bromba kernel: pci 0000:0b:07.0: PCI bridge to [bus 0f]
maj 19 13:42:15 bromba kernel: pci 0000:0b:07.0: bridge window [io 0xa000-0xafff]
maj 19 13:42:15 bromba kernel: pci 0000:0b:07.0: bridge window [mem 0xef400000-0xef4fffff]
maj 19 13:42:15 bromba kernel: pci 0000:0a:00.0: PCI bridge to [bus 0b-0f]
maj 19 13:42:15 bromba kernel: pci 0000:0a:00.0: bridge window [io 0xa000-0xbfff]
maj 19 13:42:15 bromba kernel: pci 0000:0a:00.0: bridge window [mem 0xef400000-0xef5fffff]
maj 19 13:42:15 bromba kernel: pci 0000:00:1c.2: PCI bridge to [bus 0a-0f]
maj 19 13:42:15 bromba kernel: pci 0000:00:1c.2: bridge window [io 0xa000-0xbfff]
maj 19 13:42:15 bromba kernel: pci 0000:00:1c.2: bridge window [mem 0xef400000-0xef5fffff]
maj 19 13:42:15 bromba kernel: pci 0000:00:1c.3: PCI bridge to [bus 10]
maj 19 13:42:15 bromba kernel: pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
maj 19 13:42:15 bromba kernel: pci 0000:00:1c.3: bridge window [mem 0xef600000-0xef6fffff]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:00: resource 19 [mem 0xd0000000-0xfeafffff window]
maj 19 13:42:15 bromba kernel: pci_bus 0000:01: resource 0 [io 0xc000-0xdfff]
maj 19 13:42:15 bromba kernel: pci_bus 0000:01: resource 1 [mem 0xee000000-0xef3fffff]
maj 19 13:42:15 bromba kernel: pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
maj 19 13:42:15 bromba kernel: pci_bus 0000:02: resource 0 [io 0xc000-0xdfff]
maj 19 13:42:15 bromba kernel: pci_bus 0000:02: resource 1 [mem 0xee000000-0xef2fffff]
maj 19 13:42:15 bromba kernel: pci_bus 0000:02: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
maj 19 13:42:15 bromba kernel: pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
maj 19 13:42:15 bromba kernel: pci_bus 0000:03: resource 1 [mem 0xee000000-0xef0fffff]
maj 19 13:42:15 bromba kernel: pci_bus 0000:03: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
maj 19 13:42:15 bromba kernel: pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
maj 19 13:42:15 bromba kernel: pci_bus 0000:05: resource 1 [mem 0xef200000-0xef2fffff]
maj 19 13:42:15 bromba kernel: pci_bus 0000:08: resource 1 [mem 0xef700000-0xef7fffff]
maj 19 13:42:15 bromba kernel: pci_bus 0000:0a: resource 0 [io 0xa000-0xbfff]
maj 19 13:42:15 bromba kernel: pci_bus 0000:0a: resource 1 [mem 0xef400000-0xef5fffff]
maj 19 13:42:15 bromba kernel: pci_bus 0000:0b: resource 0 [io 0xa000-0xbfff]
maj 19 13:42:15 bromba kernel: pci_bus 0000:0b: resource 1 [mem 0xef400000-0xef5fffff]
maj 19 13:42:15 bromba kernel: pci_bus 0000:0d: resource 0 [io 0xb000-0xbfff]
maj 19 13:42:15 bromba kernel: pci_bus 0000:0d: resource 1 [mem 0xef500000-0xef5fffff]
maj 19 13:42:15 bromba kernel: pci_bus 0000:0f: resource 0 [io 0xa000-0xafff]
maj 19 13:42:15 bromba kernel: pci_bus 0000:0f: resource 1 [mem 0xef400000-0xef4fffff]
maj 19 13:42:15 bromba kernel: pci_bus 0000:10: resource 0 [io 0xe000-0xefff]
maj 19 13:42:15 bromba kernel: pci_bus 0000:10: resource 1 [mem 0xef600000-0xef6fffff]
maj 19 13:42:15 bromba kernel: NET: Registered protocol family 2
maj 19 13:42:15 bromba kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
maj 19 13:42:15 bromba kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
maj 19 13:42:15 bromba kernel: TCP: Hash tables configured (established 131072 bind 65536)
maj 19 13:42:15 bromba kernel: UDP hash table entries: 8192 (order: 6, 262144 bytes)
maj 19 13:42:15 bromba kernel: UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
maj 19 13:42:15 bromba kernel: NET: Registered protocol family 1
maj 19 13:42:15 bromba kernel: PCI: CLS 64 bytes, default 64
maj 19 13:42:15 bromba kernel: Unpacking initramfs...
maj 19 13:42:15 bromba kernel: Freeing initrd memory: 8964K
maj 19 13:42:15 bromba kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
maj 19 13:42:15 bromba kernel: software IO TLB [mem 0xc6fb2000-0xcafb2000] (64MB) mapped at [ffff8bb086fb2000-ffff8bb08afb1fff]
maj 19 13:42:15 bromba kernel: Scanning for low memory corruption every 60 seconds
maj 19 13:42:15 bromba kernel: Initialise system trusted keyrings
maj 19 13:42:15 bromba kernel: Key type blacklist registered
maj 19 13:42:15 bromba kernel: workingset: timestamp_bits=41 max_order=22 bucket_order=0
maj 19 13:42:15 bromba kernel: zbud: loaded
maj 19 13:42:15 bromba kernel: Key type asymmetric registered
maj 19 13:42:15 bromba kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
maj 19 13:42:15 bromba kernel: io scheduler noop registered
maj 19 13:42:15 bromba kernel: io scheduler deadline registered (default)
maj 19 13:42:15 bromba kernel: io scheduler cfq registered
maj 19 13:42:15 bromba kernel: io scheduler mq-deadline registered
maj 19 13:42:15 bromba kernel: io scheduler kyber registered
maj 19 13:42:15 bromba kernel: io scheduler bfq registered
maj 19 13:42:15 bromba kernel: efifb: probing for efifb
maj 19 13:42:15 bromba kernel: efifb: framebuffer at 0xd0000000, using 8192k, total 8192k
maj 19 13:42:15 bromba kernel: efifb: mode is 1280x1024x32, linelength=8192, pages=1
maj 19 13:42:15 bromba kernel: efifb: scrolling: redraw
maj 19 13:42:15 bromba kernel: efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
maj 19 13:42:15 bromba kernel: Console: switching to colour frame buffer device 160x64
maj 19 13:42:15 bromba kernel: fb0: EFI VGA frame buffer device
maj 19 13:42:15 bromba kernel: intel_idle: MWAIT substates: 0x42120
maj 19 13:42:15 bromba kernel: intel_idle: v0.4.1 model 0x3C
maj 19 13:42:15 bromba kernel: intel_idle: lapic_timer_reliable_states 0xffffffff
maj 19 13:42:15 bromba kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
maj 19 13:42:15 bromba kernel: 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
maj 19 13:42:15 bromba kernel: rtc_cmos 00:02: RTC can wake from S4
maj 19 13:42:15 bromba kernel: rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
maj 19 13:42:15 bromba kernel: rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
maj 19 13:42:15 bromba kernel: intel_pstate: Intel P-state driver initializing
maj 19 13:42:15 bromba kernel: ledtrig-cpu: registered to indicate activity on CPUs
maj 19 13:42:15 bromba kernel: vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
maj 19 13:42:15 bromba kernel: NET: Registered protocol family 10
maj 19 13:42:15 bromba kernel: Segment Routing with IPv6
maj 19 13:42:15 bromba kernel: NET: Registered protocol family 17
maj 19 13:42:15 bromba kernel: RAS: Correctable Errors collector initialized.
maj 19 13:42:15 bromba kernel: microcode: sig=0x306c3, pf=0x2, revision=0x24
maj 19 13:42:15 bromba kernel: microcode: Microcode Update Driver: v2.2.
maj 19 13:42:15 bromba kernel: sched_clock: Marking stable (488433235, 0)->(488247416, 185819)
maj 19 13:42:15 bromba kernel: registered taskstats version 1
maj 19 13:42:15 bromba kernel: Loading compiled-in X.509 certificates
maj 19 13:42:15 bromba kernel: zswap: loaded using pool lzo/zbud
maj 19 13:42:15 bromba kernel: Key type big_key registered
maj 19 13:42:15 bromba kernel: Magic number: 2:272:732
maj 19 13:42:15 bromba kernel: rtc_cmos 00:02: setting system clock to 2018-05-19 11:42:13 UTC (1526730133)
maj 19 13:42:15 bromba kernel: Freeing unused kernel memory: 1412K
maj 19 13:42:15 bromba kernel: Write protecting the kernel read-only data: 16384k
maj 19 13:42:15 bromba kernel: Freeing unused kernel memory: 2016K
maj 19 13:42:15 bromba kernel: Freeing unused kernel memory: 1268K
maj 19 13:42:15 bromba kernel: nvme nvme0: pci function 0000:05:00.0
maj 19 13:42:15 bromba kernel: SCSI subsystem initialized
maj 19 13:42:15 bromba kernel: ACPI: bus type USB registered
maj 19 13:42:15 bromba kernel: usbcore: registered new interface driver usbfs
maj 19 13:42:15 bromba kernel: usbcore: registered new interface driver hub
maj 19 13:42:15 bromba kernel: usbcore: registered new device driver usb
maj 19 13:42:15 bromba kernel: libata version 3.00 loaded.
maj 19 13:42:15 bromba kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
maj 19 13:42:15 bromba kernel: ehci-pci: EHCI PCI platform driver
maj 19 13:42:15 bromba kernel: ehci-pci 0000:00:1a.0: EHCI Host Controller
maj 19 13:42:15 bromba kernel: ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
maj 19 13:42:15 bromba kernel: ehci-pci 0000:00:1a.0: debug port 2
maj 19 13:42:15 bromba kernel: ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
maj 19 13:42:15 bromba kernel: ehci-pci 0000:00:1a.0: irq 16, io mem 0xef837000
maj 19 13:42:15 bromba kernel: ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
maj 19 13:42:15 bromba kernel: hub 1-0:1.0: USB hub found
maj 19 13:42:15 bromba kernel: hub 1-0:1.0: 2 ports detected
maj 19 13:42:15 bromba kernel: ehci-pci 0000:00:1d.0: EHCI Host Controller
maj 19 13:42:15 bromba kernel: ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
maj 19 13:42:15 bromba kernel: ehci-pci 0000:00:1d.0: debug port 2
maj 19 13:42:15 bromba kernel: ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
maj 19 13:42:15 bromba kernel: ehci-pci 0000:00:1d.0: irq 23, io mem 0xef836000
maj 19 13:42:15 bromba kernel: ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
maj 19 13:42:15 bromba kernel: hub 2-0:1.0: USB hub found
maj 19 13:42:15 bromba kernel: hub 2-0:1.0: 2 ports detected
maj 19 13:42:15 bromba kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
maj 19 13:42:15 bromba kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
maj 19 13:42:15 bromba kernel: xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
maj 19 13:42:15 bromba kernel: xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
maj 19 13:42:15 bromba kernel: hub 3-0:1.0: USB hub found
maj 19 13:42:15 bromba kernel: hub 3-0:1.0: 14 ports detected
maj 19 13:42:15 bromba kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
maj 19 13:42:15 bromba kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
maj 19 13:42:15 bromba kernel: hub 4-0:1.0: USB hub found
maj 19 13:42:15 bromba kernel: hub 4-0:1.0: 6 ports detected
maj 19 13:42:15 bromba kernel: ahci 0000:00:1f.2: version 3.0
maj 19 13:42:15 bromba kernel: ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xb impl SATA mode
maj 19 13:42:15 bromba kernel: ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
maj 19 13:42:15 bromba kernel: nvme0n1: p1 p2 p3 p4
maj 19 13:42:15 bromba kernel: scsi host0: ahci
maj 19 13:42:15 bromba kernel: scsi host1: ahci
maj 19 13:42:15 bromba kernel: scsi host2: ahci
maj 19 13:42:15 bromba kernel: scsi host3: ahci
maj 19 13:42:15 bromba kernel: scsi host4: ahci
maj 19 13:42:15 bromba kernel: scsi host5: ahci
maj 19 13:42:15 bromba kernel: ata1: SATA max UDMA/133 abar m2048@0xef835000 port 0xef835100 irq 36
maj 19 13:42:15 bromba kernel: ata2: SATA max UDMA/133 abar m2048@0xef835000 port 0xef835180 irq 36
maj 19 13:42:15 bromba kernel: ata3: DUMMY
maj 19 13:42:15 bromba kernel: ata4: SATA max UDMA/133 abar m2048@0xef835000 port 0xef835280 irq 36
maj 19 13:42:15 bromba kernel: ata5: DUMMY
maj 19 13:42:15 bromba kernel: ata6: DUMMY
maj 19 13:42:15 bromba kernel: ahci 0000:08:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
maj 19 13:42:15 bromba kernel: ahci 0000:08:00.0: flags: 64bit ncq led clo only pio ccc
maj 19 13:42:15 bromba kernel: scsi host6: ahci
maj 19 13:42:15 bromba kernel: ata7: SATA max UDMA/133 abar m8192@0xef710000 port 0xef710100 irq 18
maj 19 13:42:15 bromba kernel: ahci 0000:0d:00.0: SSS flag set, parallel bus scan disabled
maj 19 13:42:15 bromba kernel: ahci 0000:0d:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
maj 19 13:42:15 bromba kernel: ahci 0000:0d:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
maj 19 13:42:15 bromba kernel: scsi host7: ahci
maj 19 13:42:15 bromba kernel: scsi host8: ahci
maj 19 13:42:15 bromba kernel: ata8: SATA max UDMA/133 abar m512@0xef500000 port 0xef500100 irq 44
maj 19 13:42:15 bromba kernel: ata9: SATA max UDMA/133 abar m512@0xef500000 port 0xef500180 irq 44
maj 19 13:42:15 bromba kernel: ahci 0000:0f:00.0: SSS flag set, parallel bus scan disabled
maj 19 13:42:15 bromba kernel: ahci 0000:0f:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
maj 19 13:42:15 bromba kernel: ahci 0000:0f:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
maj 19 13:42:15 bromba kernel: scsi host9: ahci
maj 19 13:42:15 bromba kernel: scsi host10: ahci
maj 19 13:42:15 bromba kernel: ata10: SATA max UDMA/133 abar m512@0xef400000 port 0xef400100 irq 45
maj 19 13:42:15 bromba kernel: ata11: SATA max UDMA/133 abar m512@0xef400000 port 0xef400180 irq 45
maj 19 13:42:15 bromba kernel: usb 1-1: new high-speed USB device number 2 using ehci-pci
maj 19 13:42:15 bromba kernel: usb 2-1: new high-speed USB device number 2 using ehci-pci
maj 19 13:42:15 bromba kernel: usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
maj 19 13:42:15 bromba kernel: ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
maj 19 13:42:15 bromba kernel: ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
maj 19 13:42:15 bromba kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
maj 19 13:42:15 bromba kernel: ata2.00: ATA-8: Corsair Force LS SSD, S8FM06.9, max UDMA/133
maj 19 13:42:15 bromba kernel: ata2.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
maj 19 13:42:15 bromba kernel: ata2.00: configured for UDMA/133
maj 19 13:42:15 bromba kernel: ata4.00: ATAPI: PIONEER BD-RW BDR-209M, 1.10, max UDMA/100
maj 19 13:42:15 bromba kernel: ata4.00: configured for UDMA/100
maj 19 13:42:15 bromba kernel: ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
maj 19 13:42:15 bromba kernel: ata8: SATA link down (SStatus 0 SControl 300)
maj 19 13:42:15 bromba kernel: ata10: SATA link down (SStatus 0 SControl 300)
maj 19 13:42:15 bromba kernel: ata7.00: ATA-9: SAMSUNG MZHPU512HCGL-00000, UXM6401Q, max UDMA/133
maj 19 13:42:15 bromba kernel: ata7.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
maj 19 13:42:15 bromba kernel: usb-storage 4-1:1.0: USB Mass Storage device detected
maj 19 13:42:15 bromba kernel: scsi host11: usb-storage 4-1:1.0
maj 19 13:42:15 bromba kernel: usbcore: registered new interface driver usb-storage
maj 19 13:42:15 bromba kernel: usbcore: registered new interface driver uas
maj 19 13:42:15 bromba kernel: ata1.00: ATA-8: KINGSTON SH103S3240G, 521ABBF0, max UDMA/133
maj 19 13:42:15 bromba kernel: ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
maj 19 13:42:15 bromba kernel: ata7.00: configured for UDMA/133
maj 19 13:42:15 bromba kernel: ata1.00: configured for UDMA/133
maj 19 13:42:15 bromba kernel: scsi 0:0:0:0: Direct-Access ATA KINGSTON SH103S3 BBF0 PQ: 0 ANSI: 5
maj 19 13:42:15 bromba kernel: scsi 1:0:0:0: Direct-Access ATA Corsair Force LS 06.9 PQ: 0 ANSI: 5
maj 19 13:42:15 bromba kernel: sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
maj 19 13:42:15 bromba kernel: sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
maj 19 13:42:15 bromba kernel: sd 0:0:0:0: [sda] Write Protect is off
maj 19 13:42:15 bromba kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
maj 19 13:42:15 bromba kernel: sd 1:0:0:0: [sdb] Write Protect is off
maj 19 13:42:15 bromba kernel: sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
maj 19 13:42:15 bromba kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
maj 19 13:42:15 bromba kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
maj 19 13:42:15 bromba kernel: sda: sda1
maj 19 13:42:15 bromba kernel: sd 0:0:0:0: [sda] Attached SCSI disk
maj 19 13:42:15 bromba kernel: sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6
maj 19 13:42:15 bromba kernel: sd 1:0:0:0: [sdb] Attached SCSI disk
maj 19 13:42:15 bromba kernel: scsi 3:0:0:0: CD-ROM PIONEER BD-RW BDR-209M 1.10 PQ: 0 ANSI: 5
maj 19 13:42:15 bromba kernel: scsi 6:0:0:0: Direct-Access ATA SAMSUNG MZHPU512 401Q PQ: 0 ANSI: 5
maj 19 13:42:15 bromba kernel: sd 6:0:0:0: [sdc] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
maj 19 13:42:15 bromba kernel: sd 6:0:0:0: [sdc] Write Protect is off
maj 19 13:42:15 bromba kernel: sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
maj 19 13:42:15 bromba kernel: sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
maj 19 13:42:15 bromba kernel: sdc: sdc1
maj 19 13:42:15 bromba kernel: sd 6:0:0:0: [sdc] Attached SCSI disk
maj 19 13:42:15 bromba kernel: random: fast init done
maj 19 13:42:15 bromba kernel: usb 3-5: new full-speed USB device number 2 using xhci_hcd
maj 19 13:42:15 bromba kernel: hub 1-1:1.0: USB hub found
maj 19 13:42:15 bromba kernel: hub 1-1:1.0: 6 ports detected
maj 19 13:42:15 bromba kernel: hub 2-1:1.0: USB hub found
maj 19 13:42:15 bromba kernel: hub 2-1:1.0: 8 ports detected
maj 19 13:42:15 bromba kernel: sr 3:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
maj 19 13:42:15 bromba kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
maj 19 13:42:15 bromba kernel: sr 3:0:0:0: Attached scsi CD-ROM sr0
maj 19 13:42:15 bromba kernel: hidraw: raw HID events driver (C) Jiri Kosina
maj 19 13:42:15 bromba kernel: usbcore: registered new interface driver usbhid
maj 19 13:42:15 bromba kernel: usbhid: USB HID core driver
maj 19 13:42:15 bromba kernel: input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:04D9:A067.0001/input/input0
maj 19 13:42:15 bromba kernel: holtek_mouse 0003:04D9:A067.0001: input,hidraw0: USB HID v1.10 Keyboard [Holtek USB Gaming Mouse] on usb-0000:00:14.0-5/input0
maj 19 13:42:15 bromba kernel: holtek_mouse 0003:04D9:A067.0002: Fixing up report descriptor
maj 19 13:42:15 bromba kernel: input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:04D9:A067.0002/input/input1
maj 19 13:42:15 bromba kernel: tsc: Refined TSC clocksource calibration: 3990.758 MHz
maj 19 13:42:15 bromba kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x730c85718cb, max_idle_ns: 881591244843 ns
maj 19 13:42:15 bromba kernel: ata9: SATA link down (SStatus 0 SControl 300)
maj 19 13:42:15 bromba kernel: usb 4-3: new SuperSpeed USB device number 3 using xhci_hcd
maj 19 13:42:15 bromba kernel: holtek_mouse 0003:04D9:A067.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Holtek USB Gaming Mouse] on usb-0000:00:14.0-5/input1
maj 19 13:42:15 bromba kernel: holtek_mouse 0003:04D9:A067.0003: hiddev1,hidraw2: USB HID v1.10 Device [Holtek USB Gaming Mouse] on usb-0000:00:14.0-5/input2
maj 19 13:42:15 bromba kernel: hub 4-3:1.0: USB hub found
maj 19 13:42:15 bromba kernel: hub 4-3:1.0: 4 ports detected
maj 19 13:42:15 bromba kernel: usb 3-6: new low-speed USB device number 3 using xhci_hcd
maj 19 13:42:15 bromba kernel: ata11: SATA link down (SStatus 0 SControl 300)
maj 19 13:42:15 bromba kernel: input: SONiX USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:0C45:760B.0004/input/input2
maj 19 13:42:15 bromba kernel: EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
maj 19 13:42:15 bromba kernel: hid-generic 0003:0C45:760B.0004: input,hidraw3: USB HID v1.11 Keyboard [SONiX USB Keyboard] on usb-0000:00:14.0-6/input0
maj 19 13:42:15 bromba kernel: input: SONiX USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:0C45:760B.0005/input/input3
maj 19 13:42:15 bromba kernel: usb 4-3.4: new SuperSpeed USB device number 4 using xhci_hcd
maj 19 13:42:15 bromba kernel: usb-storage 4-3.4:1.0: USB Mass Storage device detected
maj 19 13:42:15 bromba kernel: scsi host12: usb-storage 4-3.4:1.0
maj 19 13:42:15 bromba kernel: hid-generic 0003:0C45:760B.0005: input,hidraw4: USB HID v1.11 Device [SONiX USB Keyboard] on usb-0000:00:14.0-6/input1
maj 19 13:42:15 bromba kernel: scsi 11:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6
maj 19 13:42:15 bromba kernel: sd 11:0:0:0: [sdd] 121307136 512-byte logical blocks: (62.1 GB/57.8 GiB)
maj 19 13:42:15 bromba kernel: sd 11:0:0:0: [sdd] Write Protect is off
maj 19 13:42:15 bromba kernel: sd 11:0:0:0: [sdd] Mode Sense: 43 00 00 00
maj 19 13:42:15 bromba kernel: sd 11:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
maj 19 13:42:15 bromba kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
maj 19 13:42:15 bromba systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
maj 19 13:42:15 bromba kernel: sdd: sdd1 sdd2 sdd3
maj 19 13:42:15 bromba kernel: sd 11:0:0:0: [sdd] Attached SCSI removable disk
maj 19 13:42:15 bromba systemd[1]: Detected architecture x86-64.
maj 19 13:42:15 bromba systemd[1]: Set hostname to <bromba>.
maj 19 13:42:15 bromba kernel: random: systemd: uninitialized urandom read (16 bytes read)
maj 19 13:42:15 bromba systemd[1]: Listening on udev Kernel Socket.
maj 19 13:42:15 bromba kernel: random: systemd: uninitialized urandom read (16 bytes read)
maj 19 13:42:15 bromba systemd[1]: Created slice system-systemd\x2dfsck.slice.
maj 19 13:42:15 bromba kernel: random: systemd: uninitialized urandom read (16 bytes read)
maj 19 13:42:15 bromba systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
maj 19 13:42:15 bromba systemd[1]: Created slice system-getty.slice.
maj 19 13:42:15 bromba systemd[1]: Listening on Journal Socket (/dev/log).
maj 19 13:42:15 bromba systemd[1]: Listening on LVM2 metadata daemon socket.
maj 19 13:42:15 bromba systemd[1]: Listening on udev Control Socket.
maj 19 13:42:15 bromba kernel: usb 3-9: new high-speed USB device number 4 using xhci_hcd
maj 19 13:42:15 bromba kernel: EXT4-fs (nvme0n1p2): re-mounted. Opts: data=ordered
maj 19 13:42:15 bromba systemd-journald[275]: Journal started
maj 19 13:42:15 bromba systemd-journald[275]: Runtime journal (/run/log/journal/b306f3dcce10428eafb8056f357aa5c6) is 8.0M, max 799.6M, 791.6M free.
maj 19 13:42:15 bromba systemd[1]: Starting Flush Journal to Persistent Storage...
maj 19 13:42:15 bromba systemd-journald[275]: Time spent on flushing to /var is 34.914ms for 834 entries.
maj 19 13:42:15 bromba systemd-journald[275]: System journal (/var/log/journal/b306f3dcce10428eafb8056f357aa5c6) is 144.0M, max 4.0G, 3.8G free.
maj 19 13:42:15 bromba kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
maj 19 13:42:15 bromba kernel: ACPI: Power Button [PWRB]
maj 19 13:42:15 bromba kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
maj 19 13:42:15 bromba kernel: ACPI: Sleep Button [SLPB]
maj 19 13:42:15 bromba kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
maj 19 13:42:15 bromba kernel: ACPI: Power Button [PWRF]
maj 19 13:42:15 bromba kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
maj 19 13:42:15 bromba kernel: pps_core: LinuxPPS API ver. 1 registered
maj 19 13:42:15 bromba kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
maj 19 13:42:15 bromba kernel: dca service started, version 1.12.1
maj 19 13:42:15 bromba kernel: PTP clock support registered
maj 19 13:42:15 bromba kernel: input: PC Speaker as /devices/platform/pcspkr/input/input7
maj 19 13:42:15 bromba kernel: ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170728/utaddress-247)
maj 19 13:42:15 bromba kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
maj 19 13:42:15 bromba kernel: ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
maj 19 13:42:15 bromba kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
maj 19 13:42:15 bromba kernel: ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
maj 19 13:42:15 bromba kernel: ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
maj 19 13:42:15 bromba kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
maj 19 13:42:15 bromba kernel: ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
maj 19 13:42:15 bromba kernel: ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
maj 19 13:42:15 bromba kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
maj 19 13:42:15 bromba kernel: lpc_ich: Resource conflict(s) found affecting gpio_ich
maj 19 13:42:15 bromba kernel: i801_smbus 0000:00:1f.3: SPD Write Disable is set
maj 19 13:42:15 bromba kernel: i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
maj 19 13:42:15 bromba kernel: RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
maj 19 13:42:15 bromba kernel: RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
maj 19 13:42:15 bromba kernel: RAPL PMU: hw unit of domain package 2^-14 Joules
maj 19 13:42:15 bromba kernel: RAPL PMU: hw unit of domain dram 2^-14 Joules
maj 19 13:42:15 bromba kernel: RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
maj 19 13:42:15 bromba systemd[1]: Started udev Coldplug all Devices.
maj 19 13:42:15 bromba systemd[1]: Started udev Kernel Device Manager.
maj 19 13:42:15 bromba systemd[1]: Started Flush Journal to Persistent Storage.
maj 19 13:42:15 bromba systemd[1]: Found device SAMSUNG MZVPV256HDGL-00000 4.
maj 19 13:42:15 bromba systemd[1]: Found device SAMSUNG MZVPV256HDGL-00000 1.
maj 19 13:42:15 bromba systemd[1]: Found device SAMSUNG MZVPV256HDGL-00000 3.
maj 19 13:42:15 bromba systemd[1]: Failed to parse swap priority "defaults,pri=-2", ignoring: Numerical result out of range
maj 19 13:42:15 bromba systemd[1]: Activating swap /dev/disk/by-uuid/4e3651c3-d230-49da-94c6-632a0551ab68...
maj 19 13:42:15 bromba systemd[1]: Activated swap /dev/disk/by-uuid/4e3651c3-d230-49da-94c6-632a0551ab68.
maj 19 13:42:15 bromba kernel: Adding 6291452k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:6291452k SSFS
maj 19 13:42:15 bromba systemd[1]: Reached target Swap.
maj 19 13:42:15 bromba systemd[1]: Mounting Temporary Directory (/tmp)...
maj 19 13:42:15 bromba systemd[1]: Mounted Temporary Directory (/tmp).
maj 19 13:42:15 bromba systemd-udevd[307]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
maj 19 13:42:15 bromba kernel: snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
maj 19 13:42:15 bromba kernel: snd_hda_intel 0000:03:00.1: enabling device (0000 -> 0002)
maj 19 13:42:15 bromba kernel: snd_hda_intel 0000:03:00.1: Disabling MSI
maj 19 13:42:15 bromba kernel: snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
maj 19 13:42:15 bromba kernel: hub 3-9:1.0: USB hub found
maj 19 13:42:15 bromba kernel: hub 3-9:1.0: 4 ports detected
maj 19 13:42:15 bromba systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
maj 19 13:42:15 bromba systemd[1]: Reached target Local File Systems (Pre).
maj 19 13:42:15 bromba systemd[1]: Starting File System Check on /dev/disk/by-uuid/8F68-2320...
maj 19 13:42:15 bromba systemd[1]: Starting File System Check on /dev/disk/by-uuid/0fe74f24-80c9-49f1-9001-437dddb85d46...
maj 19 13:42:15 bromba systemd-fsck[340]: /dev/nvme0n1p4: czysty, 126141/12509184 plików, 2172834/50027857 bloków
maj 19 13:42:15 bromba systemd[1]: Started File System Check on /dev/disk/by-uuid/0fe74f24-80c9-49f1-9001-437dddb85d46.
maj 19 13:42:15 bromba systemd[1]: Mounting /home...
maj 19 13:42:15 bromba systemd-fsck[339]: fsck.fat 4.1 (2017-01-24)
maj 19 13:42:15 bromba systemd-fsck[339]: /dev/nvme0n1p1: 117 files, 20687/165560 clusters
maj 19 13:42:15 bromba systemd[1]: Started File System Check on /dev/disk/by-uuid/8F68-2320.
maj 19 13:42:15 bromba systemd[1]: Mounting /boot...
maj 19 13:42:15 bromba systemd[1]: Mounted /home.
maj 19 13:42:15 bromba kernel: EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: data=ordered
maj 19 13:42:15 bromba kernel: igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
maj 19 13:42:15 bromba kernel: igb: Copyright (c) 2007-2014 Intel Corporation.
maj 19 13:42:15 bromba kernel: igb 0000:10:00.0: enabling device (0000 -> 0002)
maj 19 13:42:15 bromba kernel: iTCO_vendor_support: vendor-support=0
maj 19 13:42:15 bromba kernel: e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
maj 19 13:42:15 bromba kernel: e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
maj 19 13:42:15 bromba kernel: e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
maj 19 13:42:15 bromba kernel: AVX2 version of gcm_enc/dec engaged.
maj 19 13:42:15 bromba kernel: AES CTR mode by8 optimization enabled
maj 19 13:42:15 bromba kernel: snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
maj 19 13:42:15 bromba kernel: snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
maj 19 13:42:15 bromba kernel: snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
maj 19 13:42:15 bromba kernel: snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
maj 19 13:42:15 bromba kernel: snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
maj 19 13:42:15 bromba kernel: snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
maj 19 13:42:15 bromba kernel: snd_hda_codec_realtek hdaudioC0D0: inputs:
maj 19 13:42:15 bromba kernel: snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
maj 19 13:42:15 bromba kernel: snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
maj 19 13:42:15 bromba kernel: snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
maj 19 13:42:15 bromba kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
maj 19 13:42:15 bromba kernel: iTCO_wdt: Found a 9 Series TCO device (Version=2, TCOBASE=0x1860)
maj 19 13:42:15 bromba kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
maj 19 13:42:15 bromba kernel: mousedev: PS/2 mouse device common for all mice
maj 19 13:42:15 bromba kernel: ipmi message handler version 39.2
maj 19 13:42:15 bromba kernel: ipmi device interface
maj 19 13:42:15 bromba kernel: Linux agpgart interface v0.103
maj 19 13:42:15 bromba systemd[1]: Mounted /boot.
maj 19 13:42:15 bromba systemd[1]: Reached target Local File Systems.
maj 19 13:42:15 bromba systemd[1]: Starting Rebuild Dynamic Linker Cache...
maj 19 13:42:15 bromba kernel: input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
maj 19 13:42:15 bromba kernel: input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
maj 19 13:42:15 bromba kernel: input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
maj 19 13:42:15 bromba kernel: input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
maj 19 13:42:15 bromba kernel: input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
maj 19 13:42:15 bromba kernel: input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
maj 19 13:42:15 bromba kernel: input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
maj 19 13:42:15 bromba kernel: input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
maj 19 13:42:15 bromba systemd[1]: Starting Rebuild Journal Catalog...
maj 19 13:42:15 bromba systemd[1]: Starting Create Volatile Files and Directories...
maj 19 13:42:15 bromba systemd[1]: Started Rebuild Journal Catalog.
maj 19 13:42:15 bromba systemd[1]: Started Create Volatile Files and Directories.
maj 19 13:42:15 bromba systemd[1]: Starting Network Time Synchronization...
maj 19 13:42:15 bromba systemd[1]: Starting Update UTMP about System Boot/Shutdown...
maj 19 13:42:15 bromba systemd[1]: Started Update UTMP about System Boot/Shutdown.
maj 19 13:42:15 bromba kernel: clocksource: Switched to clocksource tsc
maj 19 13:42:15 bromba systemd[1]: Started Rebuild Dynamic Linker Cache.
maj 19 13:42:15 bromba systemd[1]: Starting Update is Completed...
maj 19 13:42:15 bromba systemd-udevd[307]: Process '/usr/bin/alsactl restore 0' failed with exit code 99.
maj 19 13:42:15 bromba systemd[1]: Started Update is Completed.
maj 19 13:42:15 bromba kernel: e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
maj 19 13:42:15 bromba kernel: nvidia: loading out-of-tree module taints kernel.
maj 19 13:42:15 bromba kernel: nvidia: module license 'NVIDIA' taints kernel.
maj 19 13:42:15 bromba kernel: Disabling lock debugging due to kernel taint
maj 19 13:42:15 bromba kernel: nvidia-nvlink: Nvlink Core is being initialized, major device number 239
maj 19 13:42:15 bromba kernel: nvidia 0000:03:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
maj 19 13:42:15 bromba kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 396.24 Thu Apr 26 00:10:09 PDT 2018 (using threaded interrupts)
maj 19 13:42:15 bromba kernel: intel_rapl: Found RAPL domain package
maj 19 13:42:15 bromba kernel: intel_rapl: Found RAPL domain core
maj 19 13:42:15 bromba kernel: intel_rapl: Found RAPL domain dram
maj 19 13:42:15 bromba kernel: nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 396.24 Wed Apr 25 23:54:18 PDT 2018
maj 19 13:42:15 bromba kernel: [drm] [nvidia-drm] [GPU ID 0x00000300] Loading driver
maj 19 13:42:15 bromba kernel: [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:03:00.0 on minor 0
maj 19 13:42:15 bromba kernel: e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d0:50:99:34:3f:c4
maj 19 13:42:15 bromba kernel: e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
maj 19 13:42:15 bromba kernel: e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
maj 19 13:42:15 bromba systemd-udevd[296]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
maj 19 13:42:15 bromba kernel: e1000e 0000:00:19.0 enp0s25: renamed from eth0
maj 19 13:42:15 bromba kernel: usb 3-9.3: new high-speed USB device number 5 using xhci_hcd
maj 19 13:42:15 bromba systemd-udevd[299]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
maj 19 13:42:15 bromba kernel: pps pps0: new PPS source ptp1
maj 19 13:42:15 bromba kernel: igb 0000:10:00.0: added PHC on eth0
maj 19 13:42:15 bromba kernel: igb 0000:10:00.0: Intel(R) Gigabit Ethernet Network Connection
maj 19 13:42:15 bromba kernel: igb 0000:10:00.0: eth0: (PCIe:2.5Gb/s:Width x1) d0:50:99:34:3f:c6
maj 19 13:42:15 bromba kernel: igb 0000:10:00.0: eth0: PBA No: FFFFFF-0FF
maj 19 13:42:15 bromba kernel: igb 0000:10:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
maj 19 13:42:15 bromba kernel: igb 0000:10:00.0 enp16s0: renamed from eth0
maj 19 13:42:15 bromba kernel: usb-storage 3-9.3:1.0: USB Mass Storage device detected
maj 19 13:42:15 bromba kernel: scsi host13: usb-storage 3-9.3:1.0
maj 19 13:42:15 bromba systemd[1]: Started Network Time Synchronization.
maj 19 13:42:15 bromba systemd[1]: Reached target System Time Synchronized.
maj 19 13:42:15 bromba systemd[1]: Reached target System Initialization.
maj 19 13:42:15 bromba systemd[1]: Started Discard unused blocks once a week.
maj 19 13:42:15 bromba systemd[1]: Started Daily Cleanup of Temporary Directories.
maj 19 13:42:15 bromba systemd[1]: Started Daily rotation of log files.
maj 19 13:42:15 bromba systemd[1]: Listening on D-Bus System Message Bus Socket.
maj 19 13:42:15 bromba systemd[1]: Reached target Sockets.
maj 19 13:42:15 bromba systemd[1]: Reached target Basic System.
maj 19 13:42:15 bromba systemd[1]: Reached target Sound Card.
maj 19 13:42:15 bromba systemd[1]: Starting Login Service...
maj 19 13:42:15 bromba systemd[1]: Started D-Bus System Message Bus.
maj 19 13:42:15 bromba systemd[1]: Started Daily man-db cache update.
maj 19 13:42:15 bromba systemd[1]: Starting Network Manager...
maj 19 13:42:15 bromba systemd[1]: Started Daily verification of password and group files.
maj 19 13:42:15 bromba systemd[1]: Reached target Timers.
maj 19 13:42:15 bromba systemd-logind[417]: New seat seat0.
maj 19 13:42:15 bromba systemd-logind[417]: Watching system buttons on /dev/input/event6 (Power Button)
maj 19 13:42:15 bromba systemd-logind[417]: Watching system buttons on /dev/input/event4 (Power Button)
maj 19 13:42:15 bromba systemd-logind[417]: Watching system buttons on /dev/input/event5 (Sleep Button)
maj 19 13:42:15 bromba NetworkManager[419]: <info> [1526730135.9805] NetworkManager (version 1.10.8-1, Arch Linux) is starting... (for the first time)
maj 19 13:42:15 bromba NetworkManager[419]: <info> [1526730135.9805] Read config: /etc/NetworkManager/NetworkManager.conf (lib: 20-connectivity.conf)
maj 19 13:42:15 bromba NetworkManager[419]: <info> [1526730135.9836] manager[0x55f2ec972080]: monitoring kernel firmware directory '/usr/lib/firmware'.
maj 19 13:42:15 bromba dbus-daemon[418]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.4' (uid=0 pid=419 comm="/usr/bin/NetworkManager --no-daemon ")
maj 19 13:42:15 bromba systemd[1]: Starting Hostname Service...
maj 19 13:42:16 bromba systemd-logind[417]: Watching system buttons on /dev/input/event1 (Holtek USB Gaming Mouse)
maj 19 13:42:16 bromba systemd-logind[417]: Watching system buttons on /dev/input/event2 (SONiX USB Keyboard)
maj 19 13:42:16 bromba systemd-logind[417]: Watching system buttons on /dev/input/event3 (SONiX USB Keyboard)
maj 19 13:42:16 bromba kernel: scsi 12:0:0:0: Direct-Access Samsung Flash Drive 1100 PQ: 0 ANSI: 6
maj 19 13:42:16 bromba kernel: sd 12:0:0:0: [sde] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB)
maj 19 13:42:16 bromba kernel: sd 12:0:0:0: [sde] Write Protect is off
maj 19 13:42:16 bromba kernel: sd 12:0:0:0: [sde] Mode Sense: 43 00 00 00
maj 19 13:42:16 bromba kernel: sd 12:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
maj 19 13:42:16 bromba kernel: sde: sde1
maj 19 13:42:16 bromba kernel: sd 12:0:0:0: [sde] Attached SCSI removable disk
maj 19 13:42:16 bromba dbus-daemon[418]: [system] Successfully activated service 'org.freedesktop.hostname1'
maj 19 13:42:16 bromba systemd[1]: Started Hostname Service.
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4282] hostname: hostname: using hostnamed
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4282] hostname: hostname changed from (none) to "bromba"
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4284] dns-mgr[0x55f2ec98b930]: init: dns=default, rc-manager=symlink
maj 19 13:42:16 bromba systemd[1]: Started Network Manager.
maj 19 13:42:16 bromba systemd[1]: Reached target Network.
maj 19 13:42:16 bromba dbus-daemon[418]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.4' (uid=0 pid=419 comm="/usr/bin/NetworkManager --no-daemon ")
maj 19 13:42:16 bromba systemd[1]: Starting Permit User Sessions...
maj 19 13:42:16 bromba systemd[1]: Starting Network Manager Script Dispatcher Service...
maj 19 13:42:16 bromba systemd[1]: Started Permit User Sessions.
maj 19 13:42:16 bromba systemd[1]: Started Getty on tty1.
maj 19 13:42:16 bromba systemd[1]: Reached target Login Prompts.
maj 19 13:42:16 bromba dbus-daemon[418]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
maj 19 13:42:16 bromba systemd[1]: Started Network Manager Script Dispatcher Service.
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4449] settings: loaded plugin keyfile: (c) 2007 - 2016 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4452] settings: loaded plugin iBFT: (c) 2014 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. (/usr/lib/NetworkManager/libnm-settings-plugin-ibft.so)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4457] manager: rfkill: WiFi enabled by radio killswitch; enabled by state file
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4457] manager: rfkill: WWAN enabled by radio killswitch; enabled by state file
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4457] manager: Networking is enabled by state file
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4458] dhcp-init: Using DHCP client 'internal'
maj 19 13:42:16 bromba nm-dispatcher[434]: req:1 'hostname': new request (0 scripts)
maj 19 13:42:16 bromba nm-dispatcher[434]: req:1 'hostname': completed: no scripts
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4460] Loaded device plugin: NMBondDeviceFactory (internal)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4460] Loaded device plugin: NMBridgeDeviceFactory (internal)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4460] Loaded device plugin: NMDummyDeviceFactory (internal)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4461] Loaded device plugin: NMEthernetDeviceFactory (internal)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4461] Loaded device plugin: NMInfinibandDeviceFactory (internal)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4461] Loaded device plugin: NMIPTunnelDeviceFactory (internal)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4461] Loaded device plugin: NMMacsecDeviceFactory (internal)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4461] Loaded device plugin: NMMacvlanDeviceFactory (internal)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4461] Loaded device plugin: NMPppDeviceFactory (internal)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4461] Loaded device plugin: NMTunDeviceFactory (internal)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4461] Loaded device plugin: NMVethDeviceFactory (internal)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4461] Loaded device plugin: NMVlanDeviceFactory (internal)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4461] Loaded device plugin: NMVxlanDeviceFactory (internal)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4468] Loaded device plugin: NMOvsFactory (/usr/lib/NetworkManager/libnm-device-plugin-ovs.so)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4490] Loaded device plugin: NMBluezManager (/usr/lib/NetworkManager/libnm-device-plugin-bluetooth.so)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4493] Loaded device plugin: NMWwanFactory (/usr/lib/NetworkManager/libnm-device-plugin-wwan.so)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4496] Loaded device plugin: NMAtmManager (/usr/lib/NetworkManager/libnm-device-plugin-adsl.so)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4501] Loaded device plugin: NMWifiFactory (/usr/lib/NetworkManager/libnm-device-plugin-wifi.so)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4553] Loaded device plugin: NMTeamFactory (/usr/lib/NetworkManager/libnm-device-plugin-team.so)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4560] device (lo): carrier: link connected
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4563] manager: (lo): new Generic device (/org/freedesktop/NetworkManager/Devices/1)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4569] manager: (enp0s25): new Ethernet device (/org/freedesktop/NetworkManager/Devices/2)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4576] keyfile: add connection in-memory (141f0a50-9997-311c-962e-3f00cfd17a49,"Połączenie przewodowe 1")
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4579] settings: (enp0s25): created default wired connection 'Połączenie przewodowe 1'
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.4584] device (enp0s25): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
maj 19 13:42:16 bromba kernel: IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.6986] manager: (enp16s0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/3)
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.6990] keyfile: add connection in-memory (3f9cb90a-b1ee-3cfc-a1a5-85ab64d2c3bd,"Połączenie przewodowe 2")
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.6992] settings: (enp16s0): created default wired connection 'Połączenie przewodowe 2'
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.6996] device (enp16s0): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
maj 19 13:42:16 bromba kernel: IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
maj 19 13:42:16 bromba kernel: IPv6: ADDRCONF(NETDEV_UP): enp16s0: link is not ready
maj 19 13:42:16 bromba dbus-daemon[418]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service' requested by ':1.4' (uid=0 pid=419 comm="/usr/bin/NetworkManager --no-daemon ")
maj 19 13:42:16 bromba NetworkManager[419]: <info> [1526730136.7267] ovsdb: Nie można połączyć: Nie ma takiego pliku ani katalogu
maj 19 13:42:16 bromba systemd[1]: Starting Authorization Manager...
maj 19 13:42:16 bromba kernel: IPv6: ADDRCONF(NETDEV_UP): enp16s0: link is not ready
maj 19 13:42:16 bromba polkitd[444]: Started polkitd version 0.114
maj 19 13:42:16 bromba polkitd[444]: Loading rules from directory /etc/polkit-1/rules.d
maj 19 13:42:16 bromba polkitd[444]: Loading rules from directory /usr/share/polkit-1/rules.d
maj 19 13:42:16 bromba polkitd[444]: Finished loading, compiling and executing 3 rules
maj 19 13:42:16 bromba dbus-daemon[418]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
maj 19 13:42:16 bromba systemd[1]: Started Authorization Manager.
maj 19 13:42:16 bromba polkitd[444]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
maj 19 13:42:16 bromba kernel: scsi 13:0:0:0: Direct-Access USB 2.0 Flash Disk 8.00 PQ: 0 ANSI: 2
maj 19 13:42:16 bromba kernel: sd 13:0:0:0: [sdf] 7987200 512-byte logical blocks: (4.09 GB/3.81 GiB)
maj 19 13:42:16 bromba kernel: sd 13:0:0:0: [sdf] Write Protect is off
maj 19 13:42:16 bromba kernel: sd 13:0:0:0: [sdf] Mode Sense: 03 00 00 00
maj 19 13:42:16 bromba kernel: sd 13:0:0:0: [sdf] No Caching mode page found
maj 19 13:42:16 bromba kernel: sd 13:0:0:0: [sdf] Assuming drive cache: write through
maj 19 13:42:17 bromba systemd[1]: Started Login Service.
maj 19 13:42:17 bromba systemd[1]: Reached target Multi-User System.
maj 19 13:42:17 bromba systemd[1]: Reached target Graphical Interface.
maj 19 13:42:17 bromba systemd[1]: Startup finished in 10.138s (firmware) + 1.643s (loader) + 2.068s (kernel) + 1.937s (userspace) = 15.787s.
maj 19 13:42:17 bromba kernel: sdf: sdf1
maj 19 13:42:17 bromba kernel: sd 13:0:0:0: [sdf] Attached SCSI removable disk
maj 19 13:42:17 bromba systemd-udevd[442]: Process '/usr/bin/alsactl restore 1' failed with exit code 99.
maj 19 13:42:17 bromba kernel: input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:08.0/0000:03:00.1/sound/card1/input16
maj 19 13:42:17 bromba kernel: input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:08.0/0000:03:00.1/sound/card1/input17
maj 19 13:42:17 bromba kernel: input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:08.0/0000:03:00.1/sound/card1/input18
maj 19 13:42:17 bromba kernel: input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:08.0/0000:03:00.1/sound/card1/input19
maj 19 13:42:17 bromba kernel: random: crng init done
maj 19 13:42:17 bromba kernel: random: 7 urandom warning(s) missed due to ratelimiting
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.4802] device (enp0s25): carrier: link connected
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.4811] device (enp0s25): state change: unavailable -> disconnected (reason 'carrier-changed', sys-iface-state: 'managed')
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.4822] policy: auto-activating connection 'Połączenie przewodowe 1'
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.4836] device (enp0s25): Activation: starting connection 'Połączenie przewodowe 1' (141f0a50-9997-311c-962e-3f00cfd17a49)
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.4837] device (enp0s25): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.4838] manager: NetworkManager state is now CONNECTING
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.4840] device (enp0s25): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.4842] device (enp0s25): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.4844] dhcp4 (enp0s25): activation: beginning transaction (timeout in 45 seconds)
maj 19 13:42:19 bromba kernel: e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
maj 19 13:42:19 bromba kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
maj 19 13:42:19 bromba kernel: igb 0000:10:00.0 enp16s0: igb: enp16s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.5778] dhcp4 (enp0s25): address 192.168.0.66
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.5778] dhcp4 (enp0s25): plen 24
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.5778] dhcp4 (enp0s25): expires in 3600 seconds
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.5778] dhcp4 (enp0s25): nameserver '192.168.0.1'
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.5778] dhcp4 (enp0s25): domain name 'home'
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.5778] dhcp4 (enp0s25): hostname 'bromba'
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.5779] dhcp4 (enp0s25): gateway 192.168.0.1
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.5781] dhcp4 (enp0s25): state changed unknown -> bound
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.5784] device (enp0s25): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.5788] device (enp0s25): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.5789] device (enp0s25): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.5790] manager: NetworkManager state is now CONNECTED_LOCAL
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.5877] manager: NetworkManager state is now CONNECTED_SITE
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.5878] policy: set 'Połączenie przewodowe 1' (enp0s25) as default for IPv4 routing and DNS
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.5985] device (enp0s25): Activation: successful, device activated.
maj 19 13:42:19 bromba nm-dispatcher[434]: req:2 'up' [enp0s25]: new request (0 scripts)
maj 19 13:42:19 bromba nm-dispatcher[434]: req:2 'up' [enp0s25]: completed: no scripts
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.6382] device (enp16s0): carrier: link connected
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.6383] device (enp16s0): state change: unavailable -> disconnected (reason 'carrier-changed', sys-iface-state: 'managed')
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.6390] policy: auto-activating connection 'Połączenie przewodowe 2'
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.6394] device (enp16s0): Activation: starting connection 'Połączenie przewodowe 2' (3f9cb90a-b1ee-3cfc-a1a5-85ab64d2c3bd)
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.6396] device (enp16s0): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.6398] device (enp16s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.6401] device (enp16s0): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.6402] dhcp4 (enp16s0): activation: beginning transaction (timeout in 45 seconds)
maj 19 13:42:19 bromba kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp16s0: link becomes ready
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.6977] dhcp4 (enp16s0): address 192.168.0.87
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.6977] dhcp4 (enp16s0): plen 24
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.6977] dhcp4 (enp16s0): expires in 3600 seconds
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.6977] dhcp4 (enp16s0): nameserver '192.168.0.1'
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.6978] dhcp4 (enp16s0): domain name 'home'
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.6978] dhcp4 (enp16s0): hostname 'bromba'
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.6978] dhcp4 (enp16s0): gateway 192.168.0.1
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.6978] dhcp4 (enp16s0): state changed unknown -> bound
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.6982] device (enp16s0): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.6986] device (enp16s0): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.6987] device (enp16s0): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.7155] device (enp16s0): Activation: successful, device activated.
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.7157] manager: startup complete
maj 19 13:42:19 bromba nm-dispatcher[434]: req:3 'up' [enp16s0]: new request (0 scripts)
maj 19 13:42:19 bromba nm-dispatcher[434]: req:3 'up' [enp16s0]: completed: no scripts
maj 19 13:42:19 bromba NetworkManager[419]: <info> [1526730139.7509] manager: NetworkManager state is now CONNECTED_GLOBAL
maj 19 13:42:19 bromba nm-dispatcher[434]: req:4 'connectivity-change': new request (0 scripts)
maj 19 13:42:19 bromba nm-dispatcher[434]: req:4 'connectivity-change': completed: no scripts
maj 19 13:42:21 bromba login[435]: pam_unix(login:session): session opened for user zolo by LOGIN(uid=0)
maj 19 13:42:21 bromba systemd[1]: Created slice User Slice of zolo.
maj 19 13:42:21 bromba systemd[1]: Starting User Manager for UID 1000...
maj 19 13:42:21 bromba systemd-logind[417]: New session c1 of user zolo.
maj 19 13:42:21 bromba systemd[1]: Started Session c1 of user zolo.
maj 19 13:42:21 bromba systemd[472]: pam_unix(systemd-user:session): session opened for user zolo by (uid=0)
maj 19 13:42:21 bromba systemd[472]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).
maj 19 13:42:21 bromba systemd[472]: Listening on GnuPG network certificate management daemon.
maj 19 13:42:21 bromba login[435]: LOGIN ON tty1 BY zolo
maj 19 13:42:21 bromba systemd[472]: Starting D-Bus User Message Bus Socket.
maj 19 13:42:21 bromba systemd[472]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
maj 19 13:42:21 bromba systemd[472]: Reached target Paths.
maj 19 13:42:21 bromba systemd[472]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
maj 19 13:42:21 bromba systemd[472]: Reached target Timers.
maj 19 13:42:21 bromba systemd[472]: Listening on Sound System.
maj 19 13:42:21 bromba systemd[472]: Listening on GnuPG cryptographic agent and passphrase cache.
maj 19 13:42:21 bromba systemd[472]: Listening on D-Bus User Message Bus Socket.
maj 19 13:42:21 bromba systemd[472]: Reached target Sockets.
maj 19 13:42:21 bromba systemd[472]: Reached target Basic System.
maj 19 13:42:21 bromba systemd[472]: Reached target Default.
maj 19 13:42:21 bromba systemd[472]: Startup finished in 20ms.
maj 19 13:42:21 bromba systemd[1]: Started User Manager for UID 1000.
maj 19 13:42:22 bromba NetworkManager[419]: <info> [1526730142.0260] dhcp6 (enp16s0): activation: beginning transaction (timeout in 45 seconds)
maj 19 13:42:22 bromba NetworkManager[419]: <info> [1526730142.0266] dhcp6 (enp0s25): activation: beginning transaction (timeout in 45 seconds)
maj 19 13:42:22 bromba NetworkManager[419]: <info> [1526730142.0286] policy: set 'Połączenie przewodowe 2' (enp16s0) as default for IPv6 routing and DNS
maj 19 13:42:22 bromba NetworkManager[419]: <info> [1526730142.0388] policy: set 'Połączenie przewodowe 1' (enp0s25) as default for IPv6 routing and DNS
maj 19 13:42:22 bromba NetworkManager[419]: <info> [1526730142.0472] dhcp6 (enp16s0): nameserver 2001:730:3ed2::53
maj 19 13:42:22 bromba NetworkManager[419]: <info> [1526730142.0472] dhcp6 (enp16s0): nameserver 2001:730:3ed2:1000::53
maj 19 13:42:22 bromba NetworkManager[419]: <info> [1526730142.0472] dhcp6 (enp16s0): state changed unknown -> bound
maj 19 13:42:22 bromba nm-dispatcher[434]: req:5 'dhcp6-change' [enp16s0]: new request (0 scripts)
maj 19 13:42:22 bromba nm-dispatcher[434]: req:5 'dhcp6-change' [enp16s0]: completed: no scripts
maj 19 13:42:22 bromba NetworkManager[419]: <info> [1526730142.1776] dhcp6 (enp0s25): nameserver 2001:730:3ed2::53
maj 19 13:42:22 bromba NetworkManager[419]: <info> [1526730142.1776] dhcp6 (enp0s25): nameserver 2001:730:3ed2:1000::53
maj 19 13:42:22 bromba NetworkManager[419]: <info> [1526730142.1776] dhcp6 (enp0s25): state changed unknown -> bound
maj 19 13:42:22 bromba nm-dispatcher[434]: req:6 'dhcp6-change' [enp0s25]: new request (0 scripts)
maj 19 13:42:22 bromba nm-dispatcher[434]: req:6 'dhcp6-change' [enp0s25]: completed: no scripts
maj 19 13:42:23 bromba kernel: nvidia-modeset: Allocated GPU:0 (GPU-46727b99-f4c0-413c-8c6c-dd6dba30a390) @ PCI:0000:03:00.0
maj 19 13:42:24 bromba systemd[472]: Started D-Bus User Message Bus.
maj 19 13:42:24 bromba dbus-daemon[524]: [session uid=1000 pid=524] Activating via systemd: service name='org.gtk.vfs.Daemon' unit='gvfs-daemon.service' requested by ':1.1' (uid=1000 pid=520 comm="/usr/bin/openbox --startup /usr/lib/openbox/openbo")
maj 19 13:42:24 bromba systemd[472]: Starting Virtual filesystem service...
maj 19 13:42:24 bromba dbus-daemon[524]: [session uid=1000 pid=524] Successfully activated service 'org.gtk.vfs.Daemon'
maj 19 13:42:24 bromba systemd[472]: Started Virtual filesystem service.
maj 19 13:42:24 bromba systemd[1]: Mounting FUSE Control File System...
maj 19 13:42:24 bromba kernel: fuse init (API version 7.26)
maj 19 13:42:24 bromba systemd[1]: Mounted FUSE Control File System.
maj 19 13:42:24 bromba dbus-daemon[524]: [session uid=1000 pid=524] Activating service name='org.xfce.Xfconf' requested by ':1.4' (uid=1000 pid=555 comm="xfsettingsd ")
maj 19 13:42:24 bromba dbus-daemon[524]: [session uid=1000 pid=524] Successfully activated service 'org.xfce.Xfconf'
maj 19 13:42:24 bromba systemd[472]: Starting Sound Service...
maj 19 13:42:24 bromba dbus-daemon[418]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service' requested by ':1.13' (uid=1000 pid=560 comm="/usr/bin/pulseaudio --daemonize=no ")
maj 19 13:42:24 bromba systemd[1]: Starting RealtimeKit Scheduling Policy Service...
maj 19 13:42:24 bromba dbus-daemon[418]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
maj 19 13:42:24 bromba systemd[1]: Started RealtimeKit Scheduling Policy Service.
maj 19 13:42:24 bromba rtkit-daemon[561]: Successfully called chroot.
maj 19 13:42:24 bromba rtkit-daemon[561]: Successfully dropped privileges.
maj 19 13:42:24 bromba rtkit-daemon[561]: Successfully limited resources.
maj 19 13:42:24 bromba rtkit-daemon[561]: Running.
maj 19 13:42:24 bromba rtkit-daemon[561]: Watchdog thread running.
maj 19 13:42:24 bromba rtkit-daemon[561]: Canary thread running.
maj 19 13:42:24 bromba dbus-daemon[524]: [session uid=1000 pid=524] Activating service name='org.gnome.GConf' requested by ':1.7' (uid=1000 pid=553 comm="/usr/bin/python2 /usr/bin/dockx ")
maj 19 13:42:24 bromba rtkit-daemon[561]: Successfully made thread 560 of process 560 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
maj 19 13:42:24 bromba rtkit-daemon[561]: Supervising 1 threads of 1 processes of 1 users.
maj 19 13:42:24 bromba dbus-daemon[524]: [session uid=1000 pid=524] Successfully activated service 'org.gnome.GConf'
maj 19 13:42:24 bromba dbus-daemon[524]: [session uid=1000 pid=524] Activating via systemd: service name='org.a11y.Bus' unit='at-spi-dbus-bus.service' requested by ':1.9' (uid=1000 pid=551 comm="/usr/lib/polkit-gnome/polkit-gnome-authentication-")
maj 19 13:42:24 bromba systemd[472]: Starting Accessibility services bus...
maj 19 13:42:24 bromba dbus-daemon[524]: [session uid=1000 pid=524] Successfully activated service 'org.a11y.Bus'
maj 19 13:42:24 bromba systemd[472]: Started Accessibility services bus.
maj 19 13:42:24 bromba at-spi-bus-launcher[566]: dbus-daemon[571]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=1000 pid=551 comm="/usr/lib/polkit-gnome/polkit-gnome-authentication-")
maj 19 13:42:24 bromba at-spi-bus-launcher[566]: dbus-daemon[571]: Successfully activated service 'org.a11y.atspi.Registry'
maj 19 13:42:24 bromba at-spi-bus-launcher[566]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
maj 19 13:42:24 bromba polkitd[444]: Registered Authentication Agent for unix-session:c1 (system bus name :1.16 [/usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1], object path /org/gnome/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
maj 19 13:42:30 bromba rtkit-daemon[561]: Supervising 1 threads of 1 processes of 1 users.
maj 19 13:42:30 bromba rtkit-daemon[561]: Successfully made thread 586 of process 560 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
maj 19 13:42:30 bromba rtkit-daemon[561]: Supervising 2 threads of 1 processes of 1 users.
maj 19 13:42:30 bromba rtkit-daemon[561]: Supervising 2 threads of 1 processes of 1 users.
maj 19 13:42:30 bromba rtkit-daemon[561]: Successfully made thread 587 of process 560 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
maj 19 13:42:30 bromba rtkit-daemon[561]: Supervising 3 threads of 1 processes of 1 users.
maj 19 13:42:30 bromba systemd[472]: Started Sound Service.
maj 19 13:42:39 bromba dbus-daemon[524]: [session uid=1000 pid=524] Activating via systemd: service name='org.gtk.vfs.UDisks2VolumeMonitor' unit='gvfs-udisks2-volume-monitor.service' requested by ':1.18' (uid=1000 pid=589 comm="pcmanfm ")
maj 19 13:42:39 bromba systemd[472]: Starting Virtual filesystem service - disk device monitor...
maj 19 13:42:39 bromba dbus-daemon[418]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service' requested by ':1.19' (uid=1000 pid=592 comm="/usr/lib/gvfs-udisks2-volume-monitor ")
maj 19 13:42:39 bromba systemd[1]: Starting Disk Manager...
maj 19 13:42:39 bromba udisksd[595]: udisks daemon version 2.7.6 starting
maj 19 13:42:39 bromba dbus-daemon[418]: [system] Successfully activated service 'org.freedesktop.UDisks2'
maj 19 13:42:39 bromba systemd[1]: Started Disk Manager.
maj 19 13:42:39 bromba udisksd[595]: Acquired the name org.freedesktop.UDisks2 on the system message bus
maj 19 13:42:40 bromba dbus-daemon[524]: [session uid=1000 pid=524] Successfully activated service 'org.gtk.vfs.UDisks2VolumeMonitor'
maj 19 13:42:40 bromba systemd[472]: Started Virtual filesystem service - disk device monitor.
maj 19 13:42:40 bromba udisksd[595]: Mounted /dev/sdf1 at /run/media/zolo/5A30-B09C on behalf of uid 1000
maj 19 13:42:40 bromba dbus-daemon[524]: [session uid=1000 pid=524] Activating via systemd: service name='org.gtk.vfs.Metadata' unit='gvfs-metadata.service' requested by ':1.18' (uid=1000 pid=589 comm="pcmanfm ")
maj 19 13:42:40 bromba systemd[472]: Starting Virtual filesystem metadata service...
maj 19 13:42:40 bromba kernel: FAT-fs (sdf1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
maj 19 13:42:40 bromba dbus-daemon[524]: [session uid=1000 pid=524] Successfully activated service 'org.gtk.vfs.Metadata'
maj 19 13:42:40 bromba systemd[472]: Started Virtual filesystem metadata service.
maj 19 13:42:40 bromba udisksd[595]: Mounted /dev/sde1 at /run/media/zolo/AL-X86_64 on behalf of uid 1000
maj 19 13:42:40 bromba kernel: FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
maj 19 13:42:40 bromba udisksd[595]: Mounted /dev/sdd2 at /run/media/zolo/716e3937-79ca-4f19-9cb1-bd871533b92f on behalf of uid 1000
maj 19 13:42:40 bromba kernel: EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)
maj 19 13:42:46 bromba systemd-timesyncd[386]: Synchronized to time server [2a02:f40:10:1::3]:123 (2.arch.pool.ntp.org).
maj 19 13:48:27 bromba pulseaudio[560]: XIO: fatal IO error 11 (Zasoby chwilowo niedostępne) on X server ":0"
maj 19 13:48:27 bromba pulseaudio[560]: after 12 requests (6 known processed) with 0 events remaining.
maj 19 13:48:27 bromba polkitd[444]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.16, object path /org/gnome/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8) (disconnected from bus)
maj 19 13:48:27 bromba systemd[472]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
maj 19 13:48:27 bromba systemd[472]: pulseaudio.service: Failed with result 'exit-code'.
maj 19 13:48:27 bromba systemd[472]: pulseaudio.service: Service hold-off time over, scheduling restart.
maj 19 13:48:27 bromba systemd[472]: pulseaudio.service: Scheduled restart job, restart counter is at 1.
maj 19 13:48:27 bromba systemd[472]: Stopped Sound Service.
maj 19 13:48:27 bromba systemd[472]: Starting Sound Service...
maj 19 13:48:27 bromba rtkit-daemon[561]: Successfully made thread 1003 of process 1003 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
maj 19 13:48:27 bromba rtkit-daemon[561]: Supervising 1 threads of 1 processes of 1 users.
maj 19 13:48:27 bromba pulseaudio[1003]: W: [pulseaudio] pid.c: Stale PID file, overwriting.
maj 19 13:48:28 bromba kernel: nvidia-modeset: Freed GPU:0 (GPU-46727b99-f4c0-413c-8c6c-dd6dba30a390) @ PCI:0000:03:00.0
maj 19 13:48:33 bromba rtkit-daemon[561]: Supervising 1 threads of 1 processes of 1 users.
maj 19 13:48:33 bromba rtkit-daemon[561]: Successfully made thread 1015 of process 1003 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
maj 19 13:48:33 bromba rtkit-daemon[561]: Supervising 2 threads of 1 processes of 1 users.
maj 19 13:48:33 bromba rtkit-daemon[561]: Supervising 2 threads of 1 processes of 1 users.
maj 19 13:48:33 bromba rtkit-daemon[561]: Successfully made thread 1016 of process 1003 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
maj 19 13:48:33 bromba rtkit-daemon[561]: Supervising 3 threads of 1 processes of 1 users.
maj 19 13:48:33 bromba systemd[472]: Started Sound Service.
maj 19 13:48:35 bromba kernel: nvidia-modeset: Allocated GPU:0 (GPU-46727b99-f4c0-413c-8c6c-dd6dba30a390) @ PCI:0000:03:00.0
maj 19 13:48:35 bromba polkitd[444]: Registered Authentication Agent for unix-session:c1 (system bus name :1.45 [/usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1], object path /org/gnome/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
maj 19 13:57:30 bromba systemd[1]: Starting Cleanup of Temporary Directories...
maj 19 13:57:30 bromba systemd[1]: Started Cleanup of Temporary Directories.
maj 19 14:00:43 bromba sudo[2335]: zolo : TTY=pts/0 ; PWD=/home/zolo ; USER=root ; COMMAND=/usr/bin/nvidia-settings
maj 19 14:00:43 bromba sudo[2335]: pam_unix(sudo:session): session opened for user root by (uid=0)
maj 19 14:00:43 bromba dbus-daemon[2341]: [session uid=0 pid=2339] Activating service name='org.a11y.Bus' requested by ':1.0' (uid=0 pid=2336 comm="nvidia-settings ")
maj 19 14:00:43 bromba dbus-daemon[2341]: [session uid=0 pid=2339] Successfully activated service 'org.a11y.Bus'
maj 19 14:00:43 bromba org.a11y.Bus[2341]: dbus-daemon[2348]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=2336 comm="nvidia-settings ")
maj 19 14:00:43 bromba org.a11y.Bus[2341]: dbus-daemon[2348]: Successfully activated service 'org.a11y.atspi.Registry'
maj 19 14:00:43 bromba org.a11y.Bus[2341]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
maj 19 14:02:07 bromba sudo[2335]: pam_unix(sudo:session): session closed for user root
maj 19 14:02:24 bromba pulseaudio[1003]: XIO: fatal IO error 11 (Zasoby chwilowo niedostępne) on X server ":0"
maj 19 14:02:24 bromba pulseaudio[1003]: after 12 requests (6 known processed) with 0 events remaining.
maj 19 14:02:24 bromba org.a11y.Bus[2341]: XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
maj 19 14:02:24 bromba org.a11y.Bus[2341]: after 121 requests (121 known processed) with 0 events remaining.
maj 19 14:02:24 bromba polkitd[444]: Unregistered Authentication Agent for unix-session:c1 (system bus name :1.45, object path /org/gnome/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8) (disconnected from bus)
maj 19 14:02:24 bromba systemd[472]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
maj 19 14:02:24 bromba systemd[472]: pulseaudio.service: Failed with result 'exit-code'.
maj 19 14:02:25 bromba systemd[472]: pulseaudio.service: Service hold-off time over, scheduling restart.
maj 19 14:02:25 bromba systemd[472]: pulseaudio.service: Scheduled restart job, restart counter is at 2.
maj 19 14:02:25 bromba systemd[472]: Stopped Sound Service.
maj 19 14:02:25 bromba systemd[472]: Starting Sound Service...
maj 19 14:02:25 bromba rtkit-daemon[561]: Successfully made thread 2384 of process 2384 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
maj 19 14:02:25 bromba rtkit-daemon[561]: Supervising 1 threads of 1 processes of 1 users.
maj 19 14:02:25 bromba pulseaudio[2384]: W: [pulseaudio] pid.c: Stale PID file, overwriting.
maj 19 14:02:25 bromba kernel: nvidia-modeset: Freed GPU:0 (GPU-46727b99-f4c0-413c-8c6c-dd6dba30a390) @ PCI:0000:03:00.0
maj 19 14:02:28 bromba kernel: nvidia-modeset: Allocated GPU:0 (GPU-46727b99-f4c0-413c-8c6c-dd6dba30a390) @ PCI:0000:03:00.0
maj 19 14:02:29 bromba polkitd[444]: Registered Authentication Agent for unix-session:c1 (system bus name :1.332 [/usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1], object path /org/gnome/PolicyKit1/AuthenticationAgent, locale pl_PL.UTF-8)
maj 19 14:02:30 bromba rtkit-daemon[561]: Supervising 1 threads of 1 processes of 1 users.
maj 19 14:02:30 bromba rtkit-daemon[561]: Successfully made thread 2453 of process 2384 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
maj 19 14:02:30 bromba rtkit-daemon[561]: Supervising 2 threads of 1 processes of 1 users.
maj 19 14:02:30 bromba rtkit-daemon[561]: Supervising 2 threads of 1 processes of 1 users.
maj 19 14:02:30 bromba rtkit-daemon[561]: Successfully made thread 2454 of process 2384 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
maj 19 14:02:30 bromba rtkit-daemon[561]: Supervising 3 threads of 1 processes of 1 users.
maj 19 14:02:30 bromba systemd[472]: Started Sound Service.
maj 19 14:02:36 bromba systemd[1]: Started Getty on tty2.
maj 19 14:02:42 bromba login[2459]: pam_unix(login:session): session opened for user zolo by LOGIN(uid=0)
maj 19 14:02:42 bromba systemd-logind[417]: New session c2 of user zolo.
maj 19 14:02:42 bromba systemd[1]: Started Session c2 of user zolo.
maj 19 14:02:42 bromba login[2459]: LOGIN ON tty2 BY zoloOffline
#7 2018-05-21 14:27:32
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 21,620
Re: [SOLVED] Is there any solution for nvidia 396 screen tearring?
I don't see anything obviously wrong here I'm afraid, might be an interplay with xorg 1.20. In general you are usually better advised with using a standalone compositor like compton, as using CompositionPipeline is detrimental to general performance (as you have to composite the whole screen all the time, as opposed to a dedicated compositor that has knowledge of the windows you actually have available).
Offline
#8 2018-05-21 14:48:04
- Jagger
- Member
- Registered: 2018-03-04
- Posts: 31
Re: [SOLVED] Is there any solution for nvidia 396 screen tearring?
Thank you.
I will look on ArchWiki compton and its setting according CompositionPipeline.
For now I did dirty trick and put in my autostart file line like this:
nvidia-settings --assign CurrentMetaMode="nvidia-auto-select +0+0 {ForceCompositionPipeline=On, ForceFullCompositionPipeline = on}" &Offline
#9 2018-05-21 14:50:02
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 21,620
Re: [SOLVED] Is there any solution for nvidia 396 screen tearring?
Wait so that alone works just the xorg configuration doesn't? What if you keep the configuration and omit the non essential TripleBuffer and IndirectGLX directives? But if it works like that that might be a suitable workaround
Last edited by V1del (2018-05-21 14:51:54)
Offline
#10 2018-05-21 15:03:57
- Jagger
- Member
- Registered: 2018-03-04
- Posts: 31
Re: [SOLVED] Is there any solution for nvidia 396 screen tearring?
This looks exactly like this. I am experiencing screen tearing. When I follow instructions as I mentioned from Wiki then there is no more screen tearring but if I logout and want to login again then system freezes until I will remove the section with compositionpipline and reboot or logout the system. Give me a minute and I will check the settings omitting TrippleBuffer and IndirectGLX.
Offline
#11 2018-05-21 15:16:09
- Jagger
- Member
- Registered: 2018-03-04
- Posts: 31
Re: [SOLVED] Is there any solution for nvidia 396 screen tearring?
Hey, hey, hey it works OK:)
I can login and there is no any more a screen tearring.
I removed line with pipelinecompositing from my autostart.
My /etc/X11/xorg.conf.d/20- nvidia.conf looks like this:
Section "Device"
Identifier "Nvidia Card"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 970"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
Option "metamodes" "nvidia-auto-select +0+0 {ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}"
EndSectionLast edited by Jagger (2018-05-21 15:19:14)
Offline
#12 2018-05-23 16:05:30
- Tom B
- Member
- Registered: 2014-01-15
- Posts: 187
- Website
Re: [SOLVED] Is there any solution for nvidia 396 screen tearring?
FWIW ForceFullCompositionPipeline causes microstutter in games. The FPS counter says 60 but it feels jerky still. __GL_YIELD=ULSEEP is a much better solution. For KDE use KWIN_TRIPLE_BUFFER.
Offline
#13 2018-05-23 16:09:43
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 21,620
Re: [SOLVED] Is there any solution for nvidia 396 screen tearring?
USLEEP will not prevent tearing if one isn't already using a compositor and even then it's specific as to how that compositor is implemented. AFAIK it was only ever relevant on KWin, which isn't the point of discussion here.
Offline
#14 2018-05-24 14:23:13
- Ropid
- Member
- Registered: 2015-03-09
- Posts: 1,069
Re: [SOLVED] Is there any solution for nvidia 396 screen tearring?
Tom B wrote:
FWIW ForceFullCompositionPipeline causes microstutter in games. The FPS counter says 60 but it feels jerky still. __GL_YIELD=ULSEEP is a much better solution. For KDE use KWIN_TRIPLE_BUFFER.
That was in the past the same here for me, but I tried it again about a month ago or so, and there is no micro-stutter. Maybe it's not happening with all nvidia driver versions? Or maybe it has to do with how the compositor is configured? I'm currently using backend="xrender" and vsync="none" with Compton instead of GLX + OpenGL.
About how I tested it for micro-stutter, I tried a game named "Guacamelee" which is a metroidvania style game. It has 2D vector style graphics where I can easily see if the side-scrolling is smooth or not. Whenever I tried ForceFullCompositionPipeline in the past, the scrolling animation wasn't smooth, but right now it is fine.
Offline
#15 2018-05-24 14:30:47
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 21,620
Re: [SOLVED] Is there any solution for nvidia 396 screen tearring?
They did do a lot of work on that in the 390 series iirc, so it might have improved, however I'd argue that something as lightweight as Guacamelee might not be entirely representative of what happens under more demanding circumstances.
But what you most definitely shouldn't do is layering compositors, so if you opt for the composition pipeline you should disable any other compositor like you've done.
Offline
#16 2018-05-25 19:29:58
- Tom B
- Member
- Registered: 2014-01-15
- Posts: 187
- Website
Re: [SOLVED] Is there any solution for nvidia 396 screen tearring?
Ropid wrote:
Tom B wrote:FWIW ForceFullCompositionPipeline causes microstutter in games. The FPS counter says 60 but it feels jerky still. __GL_YIELD=ULSEEP is a much better solution. For KDE use KWIN_TRIPLE_BUFFER.
That was in the past the same here for me, but I tried it again about a month ago or so, and there is no micro-stutter. Maybe it's not happening with all nvidia driver versions? Or maybe it has to do with how the compositor is configured? I'm currently using backend="xrender" and vsync="none" with Compton instead of GLX + OpenGL.
About how I tested it for micro-stutter, I tried a game named "Guacamelee" which is a metroidvania style game. It has 2D vector style graphics where I can easily see if the side-scrolling is smooth or not. Whenever I tried ForceFullCompositionPipeline in the past, the scrolling animation wasn't smooth, but right now it is fine.
I last tried a couple of weeks ago when the 396 driver was release. Likely there is more at play than just `ForceFullCompositionPipeline` but in every game I tried, WoW, Skyrim, F1 2017 it didn't feel smooth with it on. Although it fixes tearing, the microstutter is rather more annoying to me.
Offline