Laptop's HDMI output does not work

TheZadok42 · 2018-05-22 11:46:20

I have an Ideapad FLEX 4 and I try to connect it to a screen and it does not work. What can I do?

robg · 2018-05-22 13:29:20

Start by reading this: http://catb.org/~esr/faqs/smart-questions.html

You have provided no information that could be used to help you. Start with changing that. What DE? Xorg / Wayland? What configuration, if any? Graphics drivers? What are the _precise_ steps you take to connect? Outputs of `dmesg`, `lspci`, `journalctl`?

TheZadok42 · 2018-05-22 13:37:59

I3wm with xorg. no special configs. AMD Radeon R7 M460.

I simply connected my laptop to the screen using hdmi and turned it on (the screen and the laptop).

Iscpi:

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 02)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 620 (rev 02)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)
00:15.1 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 (rev f1)
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
01:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430 / R7 M520] (rev 83)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
03:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)

dmesg:

0.000000] BIOS-e820: [mem 0x000000008aeff000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x6f5cc018-0x6f5dc057] usable ==> usable
[    0.000000] e820: update [mem 0x6f5cc018-0x6f5dc057] usable ==> usable
[    0.000000] e820: update [mem 0x7225e018-0x72265c57] usable ==> usable
[    0.000000] e820: update [mem 0x7225e018-0x72265c57] usable ==> usable
[    0.000000] e820: update [mem 0x6f5be018-0x6f5cb857] usable ==> usable
[    0.000000] e820: update [mem 0x6f5be018-0x6f5cb857] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000006f5be017] usable
[    0.000000] reserve setup_data: [mem 0x000000006f5be018-0x000000006f5cb857] usable
[    0.000000] reserve setup_data: [mem 0x000000006f5cb858-0x000000006f5cc017] usable
[    0.000000] reserve setup_data: [mem 0x000000006f5cc018-0x000000006f5dc057] usable
[    0.000000] reserve setup_data: [mem 0x000000006f5dc058-0x000000006f816fff] usable
[    0.000000] reserve setup_data: [mem 0x000000006f817000-0x000000006f817fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000006f818000-0x000000006f818fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000006f819000-0x0000000071151fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000071152000-0x0000000072251fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000072252000-0x000000007225e017] usable
[    0.000000] reserve setup_data: [mem 0x000000007225e018-0x0000000072265c57] usable
[    0.000000] reserve setup_data: [mem 0x0000000072265c58-0x0000000088467fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000088468000-0x0000000088e57fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000088e58000-0x000000008ae57fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000008ae58000-0x000000008aefdfff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000008aefe000-0x000000008aefefff] usable
[    0.000000] reserve setup_data: [mem 0x000000008aeff000-0x000000008fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000026effffff] usable
[    0.000000] efi: EFI v2.50 by INSYDE Corp.
[    0.000000] efi:  ACPI 2.0=0x8aefd014  SMBIOS=0x886dd000  SMBIOS 3.0=0x886db000  ESRT=0x886d9dd8  PROP=0x6f813858 
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: LENOVO 80VD/Lenovo ideapad FLEX 4-1480, BIOS 2SCN23WW(V2.03) 03/24/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x26f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   2 base 0090000000 mask 7FF0000000 uncachable
[    0.000000]   3 base 008C000000 mask 7FFC000000 uncachable
[    0.000000]   4 base 008B800000 mask 7FFF800000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x8aeff max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x00000000886d9dd8 to 0x00000000886d9e88.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff9e7500098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x1d963c000, 0x1d963cfff] PGTABLE
[    0.000000] BRK [0x1d963d000, 0x1d963dfff] PGTABLE
[    0.000000] BRK [0x1d963e000, 0x1d963efff] PGTABLE
[    0.000000] BRK [0x1d963f000, 0x1d963ffff] PGTABLE
[    0.000000] BRK [0x1d9640000, 0x1d9640fff] PGTABLE
[    0.000000] BRK [0x1d9641000, 0x1d9641fff] PGTABLE
[    0.000000] BRK [0x1d9642000, 0x1d9642fff] PGTABLE
[    0.000000] BRK [0x1d9643000, 0x1d9643fff] PGTABLE
[    0.000000] BRK [0x1d9644000, 0x1d9644fff] PGTABLE
[    0.000000] BRK [0x1d9645000, 0x1d9645fff] PGTABLE
[    0.000000] BRK [0x1d9646000, 0x1d9646fff] PGTABLE
[    0.000000] BRK [0x1d9647000, 0x1d9647fff] PGTABLE
[    0.000000] Secure boot disabled
[    0.000000] RAMDISK: [mem 0x7f8bd000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000008AEFD014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000008AEC7188 00011C (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x000000008AEEE000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000008AECD000 01D8A3 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000008AE35000 000040
[    0.000000] ACPI: UEFI 0x000000008AEFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000008AEFB000 000042 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000008AEFA000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AEF9000 0004C8 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AEF8000 000046 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: TPM2 0x000000008AEF7000 000034 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AEF3000 003113 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000008AEF2000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x000000008AEF1000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000008AEF0000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000008AEEF000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000008AEED000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000008AEEC000 0000BC (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000008AEEB000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AECC000 000AD2 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AECB000 0001BC (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x000000008AECA000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WSMT 0x000000008AEC9000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AEC8000 00029F (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AEC6000 000346 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AEC2000 003002 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AEC1000 00051E (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000008AEC0000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBG2 0x000000008AEBF000 000061 (v00 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AEBD000 00106A (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AEBC000 000EDE (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000008AEBA000 001B0E (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x000000008AEB9000 0000F0 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000008AEB8000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x000000008AEB7000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000026effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x26effc000-0x26effffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000026effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000006f816fff]
[    0.000000]   node   0: [mem 0x000000006f819000-0x0000000071151fff]
[    0.000000]   node   0: [mem 0x0000000072252000-0x0000000088467fff]
[    0.000000]   node   0: [mem 0x000000008aefe000-0x000000008aefefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000026effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026effffff]
[    0.000000] On node 0 totalpages: 2056963
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8590 pages used for memmap
[    0.000000]   DMA32 zone: 549735 pages, LIFO batch:31
[    0.000000]   Normal zone: 23488 pages used for memmap
[    0.000000]   Normal zone: 1503232 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000008c000000-0x000000008fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x52 (or later)
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x6f5be000-0x6f5befff]
[    0.000000] PM: Registered nosave memory: [mem 0x6f5cb000-0x6f5cbfff]
[    0.000000] PM: Registered nosave memory: [mem 0x6f5cc000-0x6f5ccfff]
[    0.000000] PM: Registered nosave memory: [mem 0x6f5dc000-0x6f5dcfff]
[    0.000000] PM: Registered nosave memory: [mem 0x6f817000-0x6f817fff]
[    0.000000] PM: Registered nosave memory: [mem 0x6f818000-0x6f818fff]
[    0.000000] PM: Registered nosave memory: [mem 0x71152000-0x72251fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7225e000-0x7225efff]
[    0.000000] PM: Registered nosave memory: [mem 0x72265000-0x72265fff]
[    0.000000] PM: Registered nosave memory: [mem 0x88468000-0x88e57fff]
[    0.000000] PM: Registered nosave memory: [mem 0x88e58000-0x8ae57fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8ae58000-0x8aefdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x8aeff000-0x8fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0x90000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x93/0x4cc with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 42 pages/cpu @ffff9e776ec00000 s132440 r8192 d31400 u524288
[    0.000000] pcpu-alloc: s132440 r8192 d31400 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2024800
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: initrd=\initramfs-linux-lts.img root=PARTUUID=eafc7476-c06e-484a-ae0a-a25edd3aa27d rw
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7939156K/8227852K available (10252K kernel code, 1150K rwdata, 2828K rodata, 1412K init, 988K bss, 288696K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 29093 entries in 114 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 8448, nr_irqs: 1024, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.010000] tsc: Detected 2700.000 MHz processor
[    0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5424.00 BogoMIPS (lpj=27120000)
[    0.010000] pid_max: default: 32768 minimum: 301
[    0.010000] ACPI: Core revision 20170728
[    0.032257] ACPI: 13 ACPI AML tables successfully acquired and loaded
[    0.033370] Security Framework initialized
[    0.033371] Yama: becoming mindful.
[    0.034451] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.035089] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.035116] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.035134] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.035278] CPU: Physical Processor ID: 0
[    0.035278] CPU: Processor Core ID: 0
[    0.035282] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.035282] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.035286] mce: CPU supports 8 MCE banks
[    0.035294] CPU0: Thermal monitoring enabled (TM1)
[    0.035306] process: using mwait in idle threads
[    0.035308] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.035308] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.035309] Spectre V2 : Mitigation: Full generic retpoline
[    0.035310] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.035579] Freeing SMP alternatives memory: 28K
[    0.040515] smpboot: Max logical packages: 2
[    0.040519] DMAR: Host address width 39
[    0.040520] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.040527] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.040528] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.040532] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.040533] DMAR: RMRR base: 0x00000088d54000 end: 0x00000088d73fff
[    0.040533] DMAR: RMRR base: 0x0000008b800000 end: 0x0000008fffffff
[    0.040534] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.040535] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.040536] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.040537] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.040537] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.041965] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.041966] x2apic enabled
[    0.041976] Switched APIC routing to cluster x2apic.
[    0.045950] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.150000] smpboot: CPU0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[    0.150000] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.150000] ... version:                4
[    0.150000] ... bit width:              48
[    0.150000] ... generic registers:      4
[    0.150000] ... value mask:             0000ffffffffffff
[    0.150000] ... max period:             00007fffffffffff
[    0.150000] ... fixed-purpose events:   3
[    0.150000] ... event mask:             000000070000000f
[    0.150000] Hierarchical SRCU implementation.
[    0.150000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.150000] smp: Bringing up secondary CPUs ...
[    0.150000] x86: Booting SMP configuration:
[    0.150000] .... node  #0, CPUs:      #1 #2 #3
[    0.150000] smp: Brought up 1 node, 4 CPUs
[    0.150000] smpboot: Total of 4 processors activated (21696.00 BogoMIPS)
[    0.150000] devtmpfs: initialized
[    0.150000] x86/mm: Memory block size: 128MB
[    0.150000] PM: Registering ACPI NVS region [mem 0x6f817000-0x6f817fff] (4096 bytes)
[    0.150000] PM: Registering ACPI NVS region [mem 0x71152000-0x72251fff] (17825792 bytes)
[    0.150000] PM: Registering ACPI NVS region [mem 0x88e58000-0x8ae57fff] (33554432 bytes)
[    0.150000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.150000] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.150000] pinctrl core: initialized pinctrl subsystem
[    0.150000] RTC time: 11:40:03, date: 05/22/18
[    0.150000] NET: Registered protocol family 16
[    0.150000] cpuidle: using governor ladder
[    0.150000] cpuidle: using governor menu
[    0.150000] Simple Boot Flag at 0x44 set to 0x1
[    0.150000] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.150000] ACPI: bus type PCI registered
[    0.150000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.150000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.150000] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.150000] PCI: Using configuration type 1 for base access
[    0.150000] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.150000] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.150000] ACPI: Added _OSI(Module Device)
[    0.150000] ACPI: Added _OSI(Processor Device)
[    0.150000] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.150000] ACPI: Added _OSI(Processor Aggregator Device)
[    0.150000] ACPI: Executed 31 blocks of module-level executable AML code
[    0.152777] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.152777] ACPI: Dynamic OEM Table Load:
[    0.152779] ACPI: SSDT 0xFFFF9E77648C9000 0006B4 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.152779] ACPI: Executed 1 blocks of module-level executable AML code
[    0.152779] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.152779] ACPI: Dynamic OEM Table Load:
[    0.152779] ACPI: SSDT 0xFFFF9E77648DA400 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.152779] ACPI: Executed 1 blocks of module-level executable AML code
[    0.152779] ACPI: Dynamic OEM Table Load:
[    0.152779] ACPI: SSDT 0xFFFF9E7764F37000 00065C (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.152779] ACPI: Executed 1 blocks of module-level executable AML code
[    0.160017] ACPI: Dynamic OEM Table Load:
[    0.160022] ACPI: SSDT 0xFFFF9E77648D5800 00018A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.160167] ACPI: Executed 1 blocks of module-level executable AML code
[    0.161332] ACPI: EC: EC started
[    0.161332] ACPI: EC: interrupt blocked
[    0.161618] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.161619] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.161620] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.161620] ACPI: Interpreter enabled
[    0.161657] ACPI: (supports S0 S3 S4 S5)
[    0.161658] ACPI: Using IOAPIC for interrupt routing
[    0.161685] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.163324] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.183019] ACPI: Power Resource [PC01] (on)
[    0.195766] ACPI: Power Resource [FN00] (off)
[    0.195840] ACPI: Power Resource [FN01] (off)
[    0.195897] ACPI: Power Resource [FN02] (off)
[    0.195953] ACPI: Power Resource [FN03] (off)
[    0.196007] ACPI: Power Resource [FN04] (off)
[    0.196875] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.196879] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.196901] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.198322] PCI host bridge to bus 0000:00
[    0.198323] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.198325] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.198326] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.198327] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.198328] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.198329] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.198330] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.198330] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.198331] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.198332] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.198333] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.198334] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.198335] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.198336] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.198343] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[    0.199054] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[    0.199063] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
[    0.199068] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.199071] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.199082] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.199706] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.199728] pci 0000:00:14.0: reg 0x10: [mem 0xc1500000-0xc150ffff 64bit]
[    0.199793] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.200413] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.200434] pci 0000:00:14.2: reg 0x10: [mem 0xc152a000-0xc152afff 64bit]
[    0.201053] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[    0.201082] pci 0000:00:15.0: reg 0x10: [mem 0xc152b000-0xc152bfff 64bit]
[    0.201725] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[    0.201753] pci 0000:00:15.1: reg 0x10: [mem 0xc152c000-0xc152cfff 64bit]
[    0.202421] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.202462] pci 0000:00:16.0: reg 0x10: [mem 0xc152d000-0xc152dfff 64bit]
[    0.202577] pci 0000:00:16.0: PME# supported from D3hot
[    0.203168] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.203186] pci 0000:00:17.0: reg 0x10: [mem 0xc1528000-0xc1529fff]
[    0.203193] pci 0000:00:17.0: reg 0x14: [mem 0xc1530000-0xc15300ff]
[    0.203201] pci 0000:00:17.0: reg 0x18: [io  0x5080-0x5087]
[    0.203208] pci 0000:00:17.0: reg 0x1c: [io  0x5088-0x508b]
[    0.203215] pci 0000:00:17.0: reg 0x20: [io  0x5060-0x507f]
[    0.203223] pci 0000:00:17.0: reg 0x24: [mem 0xc152e000-0xc152e7ff]
[    0.203263] pci 0000:00:17.0: PME# supported from D3hot
[    0.203844] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.203910] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.204513] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[    0.204578] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.205169] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[    0.205233] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.205827] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[    0.205890] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.206507] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100
[    0.207183] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.207199] pci 0000:00:1f.2: reg 0x10: [mem 0xc1524000-0xc1527fff]
[    0.207819] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[    0.207847] pci 0000:00:1f.3: reg 0x10: [mem 0xc1520000-0xc1523fff 64bit]
[    0.207880] pci 0000:00:1f.3: reg 0x20: [mem 0xc1510000-0xc151ffff 64bit]
[    0.207928] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.208526] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.208586] pci 0000:00:1f.4: reg 0x10: [mem 0xc152f000-0xc152f0ff 64bit]
[    0.208655] pci 0000:00:1f.4: reg 0x20: [io  0x5040-0x505f]
[    0.209338] pci 0000:01:00.0: [1002:6660] type 00 class 0x038000
[    0.209360] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.209370] pci 0000:01:00.0: reg 0x18: [mem 0xc1400000-0xc143ffff 64bit]
[    0.209375] pci 0000:01:00.0: reg 0x20: [io  0x4000-0x40ff]
[    0.209386] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.209393] pci 0000:01:00.0: enabling Extended Tags
[    0.209441] pci 0000:01:00.0: supports D1 D2
[    0.209442] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.209497] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.209500] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.209502] pci 0000:00:1c.0:   bridge window [mem 0xc1400000-0xc14fffff]
[    0.209506] pci 0000:00:1c.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.209568] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.209602] pci 0000:02:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.209628] pci 0000:02:00.0: reg 0x18: [mem 0xc1304000-0xc1304fff 64bit]
[    0.209649] pci 0000:02:00.0: reg 0x20: [mem 0xc1300000-0xc1303fff 64bit]
[    0.209753] pci 0000:02:00.0: supports D1 D2
[    0.209755] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.240085] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.240088] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.240091] pci 0000:00:1c.4:   bridge window [mem 0xc1300000-0xc13fffff]
[    0.240206] pci 0000:03:00.0: [168c:003e] type 00 class 0x028000
[    0.240273] pci 0000:03:00.0: reg 0x10: [mem 0xc1000000-0xc11fffff 64bit]
[    0.240509] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.270120] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.270125] pci 0000:00:1c.5:   bridge window [mem 0xc1000000-0xc11fffff]
[    0.270196] pci 0000:04:00.0: [10ec:5229] type 00 class 0xff0000
[    0.270233] pci 0000:04:00.0: reg 0x10: [mem 0xc1200000-0xc1200fff]
[    0.270379] pci 0000:04:00.0: supports D1 D2
[    0.270380] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[    0.300055] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    0.300060] pci 0000:00:1d.0:   bridge window [mem 0xc1200000-0xc12fffff]
[    0.321168] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.321214] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.321258] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.321301] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.321344] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.321388] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.321432] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.321475] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.321754] platform MSFT0101:00: failed to claim resource 1: [mem 0xfed40000-0xfed40fff]
[    0.321760] acpi MSFT0101:00: platform device creation failed: -16
[    0.322119] ACPI: EC: interrupt unblocked
[    0.322133] ACPI: EC: event unblocked
[    0.322145] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.322146] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.322216] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.322216] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.322216] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.322216] vgaarb: loaded
[    0.322216] EDAC MC: Ver: 3.0.0
[    0.322216] Registered efivars operations
[    0.363006] PCI: Using ACPI for IRQ routing
[    0.391005] PCI: pci_cache_line_size set to 64 bytes
[    0.391117] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.391118] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.391118] e820: reserve RAM buffer [mem 0x6f5be018-0x6fffffff]
[    0.391119] e820: reserve RAM buffer [mem 0x6f5cc018-0x6fffffff]
[    0.391120] e820: reserve RAM buffer [mem 0x6f817000-0x6fffffff]
[    0.391121] e820: reserve RAM buffer [mem 0x71152000-0x73ffffff]
[    0.391121] e820: reserve RAM buffer [mem 0x7225e018-0x73ffffff]
[    0.391122] e820: reserve RAM buffer [mem 0x88468000-0x8bffffff]
[    0.391123] e820: reserve RAM buffer [mem 0x8aeff000-0x8bffffff]
[    0.391124] e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff]
[    0.391183] NetLabel: Initializing
[    0.391183] NetLabel:  domain hash size = 128
[    0.391184] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.391193] NetLabel:  unlabeled traffic allowed by default
[    0.391201] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.391201] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.392100] clocksource: Switched to clocksource hpet
[    0.398268] VFS: Disk quotas dquot_6.6.0
[    0.398280] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.398320] pnp: PnP ACPI init
[    0.398461] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.398462] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.398464] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.398465] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[    0.398466] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.398467] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.398468] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.398472] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.398694] system 00:01: [io  0x2000-0x20fe] has been reserved
[    0.398696] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.398696] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.398696] system 00:02: [io  0xfd40-0xfd43] has been reserved
[    0.398696] system 00:02: [io  0xffff] has been reserved
[    0.398696] system 00:02: [io  0xffff] has been reserved
[    0.398696] system 00:02: [io  0xffff] has been reserved
[    0.398696] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.398696] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.398696] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.398696] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.398696] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.398696] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.398696] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.420095] pnp 00:06: Plug and Play ACPI device, IDs SYN2b89 SYN2b00 SYN0002 PNP0f13 (active)
[    0.421055] system 00:07: [mem 0xfe035000-0xfe035fff] has been reserved
[    0.421057] system 00:07: [mem 0xfe034008-0xfe034fff] has been reserved
[    0.421060] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.421540] system 00:08: [mem 0xfe034000-0xfe034007] has been reserved
[    0.421543] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.421697] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.421698] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.421700] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.421701] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.421703] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.421704] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.421706] system 00:09: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.421707] system 00:09: [mem 0xff000000-0xff000fff] has been reserved
[    0.421709] system 00:09: [mem 0xff010000-0xffffffff] could not be reserved
[    0.421710] system 00:09: [mem 0xff001000-0xff0010ff] has been reserved
[    0.421712] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.421713] system 00:09: [mem 0x90000000-0x9001ffff] has been reserved
[    0.421716] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.422194] pnp: PnP ACPI: found 10 devices
[    0.429557] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.429560] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.429586] pci 0000:01:00.0: BAR 6: assigned [mem 0xc1440000-0xc145ffff pref]
[    0.429587] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.429589] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.429592] pci 0000:00:1c.0:   bridge window [mem 0xc1400000-0xc14fffff]
[    0.429595] pci 0000:00:1c.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.429599] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.429601] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.429604] pci 0000:00:1c.4:   bridge window [mem 0xc1300000-0xc13fffff]
[    0.429610] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.429613] pci 0000:00:1c.5:   bridge window [mem 0xc1000000-0xc11fffff]
[    0.429619] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    0.429622] pci 0000:00:1d.0:   bridge window [mem 0xc1200000-0xc12fffff]
[    0.429628] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.429629] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.429631] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.429632] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.429633] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.429634] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.429635] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.429636] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.429637] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.429638] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.429639] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.429640] pci_bus 0000:00: resource 15 [mem 0x90000000-0xdfffffff window]
[    0.429641] pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window]
[    0.429642] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.429643] pci_bus 0000:01: resource 1 [mem 0xc1400000-0xc14fffff]
[    0.429644] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[    0.429646] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.429647] pci_bus 0000:02: resource 1 [mem 0xc1300000-0xc13fffff]
[    0.429648] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc11fffff]
[    0.429649] pci_bus 0000:04: resource 1 [mem 0xc1200000-0xc12fffff]
[    0.429756] NET: Registered protocol family 2
[    0.429870] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.429956] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.430127] TCP: Hash tables configured (established 65536 bind 65536)
[    0.430151] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.430172] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.430213] NET: Registered protocol family 1
[    0.430223] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.431686] PCI: CLS 64 bytes, default 64
[    0.431712] Unpacking initramfs...
[    0.518650] Freeing initrd memory: 7432K
[    0.518681] DMAR: ACPI device "device:77" under DMAR at fed91000 as 00:15.0
[    0.518684] DMAR: ACPI device "device:78" under DMAR at fed91000 as 00:15.1
[    0.518695] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.518697] software IO TLB [mem 0x83e9c000-0x87e9c000] (64MB) mapped at [ffff9e7583e9c000-ffff9e7587e9bfff]
[    0.518832] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2717868ea45, max_idle_ns: 440795316085 ns
[    0.518929] Scanning for low memory corruption every 60 seconds
[    0.519357] Initialise system trusted keyrings
[    0.519363] Key type blacklist registered
[    0.519428] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.520094] zbud: loaded
[    0.522402] Key type asymmetric registered
[    0.522424] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.522473] io scheduler noop registered
[    0.522474] io scheduler deadline registered (default)
[    0.522501] io scheduler cfq registered
[    0.522502] io scheduler mq-deadline registered
[    0.522502] io scheduler kyber registered
[    0.522519] io scheduler bfq registered
[    0.523088] efifb: probing for efifb
[    0.523102] efifb: framebuffer at 0xb0000000, using 8100k, total 8100k
[    0.523103] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.523103] efifb: scrolling: redraw
[    0.523104] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.526058] Console: switching to colour frame buffer device 240x67
[    0.528929] fb0: EFI VGA frame buffer device
[    0.528935] intel_idle: MWAIT substates: 0x11142120
[    0.528935] intel_idle: v0.4.1 model 0x8E
[    0.529082] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.529387] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.530085] rtc_cmos 00:03: RTC can wake from S4
[    0.530468] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.530553] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.530559] intel_pstate: Intel P-state driver initializing
[    0.530883] intel_pstate: HWP enabled
[    0.530986] ledtrig-cpu: registered to indicate activity on CPUs
[    0.531030] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    0.531186] NET: Registered protocol family 10
[    0.534587] Segment Routing with IPv6
[    0.534603] NET: Registered protocol family 17
[    0.534911] RAS: Correctable Errors collector initialized.
[    0.534929] microcode: sig=0x806e9, pf=0x80, revision=0x3c
[    0.535065] microcode: Microcode Update Driver: v2.2.
[    0.535072] sched_clock: Marking stable (535062422, 0)->(650064157, -115001735)
[    0.535358] registered taskstats version 1
[    0.535362] Loading compiled-in X.509 certificates
[    0.535373] zswap: loaded using pool lzo/zbud
[    0.537470] Key type big_key registered
[    0.538224]   Magic number: 2:944:681
[    0.538408] rtc_cmos 00:03: setting system clock to 2018-05-22 11:40:04 UTC (1526989204)
[    0.539908] Freeing unused kernel memory: 1412K
[    0.539909] Write protecting the kernel read-only data: 16384k
[    0.540327] Freeing unused kernel memory: 2016K
[    0.541950] Freeing unused kernel memory: 1268K
[    0.652808] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.660578] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.660584] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.666464] ACPI: bus type USB registered
[    0.666484] usbcore: registered new interface driver usbfs
[    0.666491] usbcore: registered new interface driver hub
[    0.666508] usbcore: registered new device driver usb
[    0.668110] SCSI subsystem initialized
[    0.671929] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.671934] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.673091] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.673104] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.673365] hub 1-0:1.0: USB hub found
[    0.673402] hub 1-0:1.0: 12 ports detected
[    0.673969] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.673972] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.674171] hub 2-0:1.0: USB hub found
[    0.674195] hub 2-0:1.0: 6 ports detected
[    0.674359] usb: port power management may be unreliable
[    0.674691] libata version 3.00 loaded.
[    0.675864] ahci 0000:00:17.0: version 3.0
[    0.676063] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x1 impl SATA mode
[    0.676066] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    0.676362] scsi host0: ahci
[    0.676498] scsi host1: ahci
[    0.676535] ata1: SATA max UDMA/133 abar m2048@0xc152e000 port 0xc152e100 irq 124
[    0.676536] ata2: DUMMY
[    0.709716] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.004749] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.007474] ata1.00: ATA-9: SAMSUNG MZYTY256HDHP-000L2, MAT61L1Q, max UDMA/133
[    1.007478] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.009892] ata1.00: configured for UDMA/133
[    1.010244] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG MZYTY256 1L1Q PQ: 0 ANSI: 5
[    1.015256] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.015300] sd 0:0:0:0: [sda] Write Protect is off
[    1.015305] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.015392] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.017363]  sda: sda1 sda2
[    1.018485] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.050091] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[    1.140376] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    1.150940] random: fast init done
[    1.222911] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.230225] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    1.260554] systemd[1]: Detected architecture x86-64.
[    1.266396] systemd[1]: Set hostname to <tzadok-42>.
[    1.343319] random: systemd: uninitialized urandom read (16 bytes read)
[    1.343377] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.343489] random: systemd: uninitialized urandom read (16 bytes read)
[    1.343551] systemd[1]: Listening on udev Control Socket.
[    1.343622] random: systemd: uninitialized urandom read (16 bytes read)
[    1.343654] systemd[1]: Listening on udev Kernel Socket.
[    1.345028] systemd[1]: Created slice system-getty.slice.
[    1.345134] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.345248] systemd[1]: Listening on LVM2 poll daemon socket.
[    1.345469] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    1.369984] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[    1.381690] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.390035] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[    1.431602] systemd-journald[190]: Received request to flush runtime journal from PID 1
[    1.482519] Adding 4194300k swap on /swapfile.  Priority:-2 extents:9 across:4505596k SSFS
[    1.520127] clocksource: Switched to clocksource tsc
[    1.533865] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C0D:00/input/input2
[    1.533892] ACPI: Lid Switch [LID0]
[    1.533960] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    1.534984] ACPI: Power Button [PWRB]
[    1.535044] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    1.535060] ACPI: Power Button [PWRF]
[    1.620377] ACPI: AC Adapter [ACAD] (on-line)
[    1.660609] [Firmware Bug]: No valid trip found
[    1.660626] [Firmware Bug]: No valid trip found
[    1.661444] hidraw: raw HID events driver (C) Jiri Kosina
[    1.668983] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.670315] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    1.673068] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    1.676136] Linux agpgart interface v0.103
[    1.710731] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    1.727636] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5
[    1.780048] usb 1-6: new full-speed USB device number 4 using xhci_hcd
[    1.830760] ACPI: Battery Slot [BAT1] (battery present)
[    1.850940] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    1.851212] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    1.855765] random: crng init done
[    1.855767] random: 7 urandom warning(s) missed due to ratelimiting
[    1.886765] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    1.886766] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    1.886767] RAPL PMU: hw unit of domain package 2^-14 Joules
[    1.886767] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    1.886768] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    1.886769] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    1.902904] AVX2 version of gcm_enc/dec engaged.
[    1.902905] AES CTR mode by8 optimization enabled
[    1.914637] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    1.923623] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.928132] [drm] Memory usable by graphics device = 4096M
[    1.928135] checking generic (b0000000 7e9000) vs hw (b0000000 10000000)
[    1.928136] fb: switching to inteldrmfb from EFI VGA
[    1.928154] Console: switching to colour dummy device 80x25
[    1.928225] [drm] Replacing VGA console driver
[    1.940072] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.940073] [drm] Driver supports precise vblank timestamp query.
[    1.942153] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.944326] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[    1.954324] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.954331] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.981289] r8169 0000:02:00.0 eth0: RTL8168h/8111h at 0xffffb6dd81071000, fc:45:96:3e:7d:96, XID 14100800 IRQ 127
[    1.981291] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.982154] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[    1.997258] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.997433] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    1.997930] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    1.997974] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.011426] kvm: disabled by bios
[    2.069693] intel_rapl: Found RAPL domain package
[    2.069694] intel_rapl: Found RAPL domain core
[    2.069695] intel_rapl: Found RAPL domain uncore
[    2.069696] intel_rapl: Found RAPL domain dram
[    2.077439] input: SYNA7501:00 06CB:16C9 as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-SYNA7501:00/0018:06CB:16C9.0002/input/input8
[    2.077981] hid-multitouch 0018:06CB:16C9.0002: input,hidraw0: I2C HID v1.00 Device [SYNA7501:00 06CB:16C9] on i2c-SYNA7501:00
[    2.080714] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    2.110073] usb 1-7: new full-speed USB device number 5 using xhci_hcd
[    2.124438] i915 0000:00:02.0: HDMI-A-1: EDID is invalid:
[    2.124443] 	[00] BAD  00 ff ff ff ff ff ff 00 4c 2d 7a 0a 00 00 00 00
[    2.124444] 	[00] BAD  2e 16 01 03 80 59 32 78 0a ee 91 a3 54 4c 99 26
[    2.124444] 	[00] BAD  0f 50 54 bd ef 80 71 4f 81 c0 81 00 81 80 95 00
[    2.124445] 	[00] BAD  a9 c0 b3 00 01 01 02 3a 80 18 71 38 2d 40 58 2c
[    2.124445] 	[00] BAD  45 00 24 72 42 00 00 1e 66 21 56 aa 51 00 1e 30
[    2.124446] 	[00] BAD  46 8f 33 00 24 72 42 00 00 1e 00 00 00 fd 00 18
[    2.124446] 	[00] BAD  4b 0f 51 17 f5 0a 20 20 20 20 20 20 00 00 70 fc
[    2.124447] 	[00] BAD  00 53 41 4d 53 55 4e 47 f5 20 20 20 20 20 01 6b
[    2.138394] iTCO_vendor_support: vendor-support=0
[    2.139359] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.139594] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    2.139903] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.346852] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4682]
[    2.383654] psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1172..]
[    2.383659] psmouse serio1: synaptics: Your touchpad (PNP: SYN2b89 SYN2b00 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    2.452908] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127c00/0x0, board id: 2334, fw id: 1508589
[    2.497019] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    2.763541] kvm: disabled by bios
[    2.766643] media: Linux media interface: v0.10
[    2.767620] mousedev: PS/2 mouse device common for all mice
[    2.770371] usbcore: registered new interface driver usbhid
[    2.770372] usbhid: USB HID core driver
[    2.773532] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:25A7:FA23.0003/input/input13
[    2.836035] Linux video capture interface: v2.00
[    2.841549] hid-generic 0003:25A7:FA23.0003: input,hidraw1: USB HID v1.10 Keyboard [Compx 2.4G Receiver] on usb-0000:00:14.0-4/input0
[    2.841791] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:25A7:FA23.0004/input/input14
[    2.852457] Bluetooth: Core ver 2.22
[    2.852471] NET: Registered protocol family 31
[    2.852471] Bluetooth: HCI device and connection manager initialized
[    2.852475] Bluetooth: HCI socket layer initialized
[    2.852477] Bluetooth: L2CAP socket layer initialized
[    2.852487] Bluetooth: SCO socket layer initialized
[    2.862052] [drm] radeon kernel modesetting enabled.
[    2.862068] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[    2.862169] ATPX version 1, functions 0x00000033
[    2.862263] ATPX Hybrid Graphics
[    2.866272] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    2.866275] AMD IOMMUv2 functionality not available on this system
[    2.870838] usbcore: registered new interface driver btusb
[    2.873916] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[    2.875536] CRAT table not found
[    2.875537] Finished initializing topology ret=0
[    2.875548] kfd kfd: Initialized module
[    2.876493] radeon 0000:01:00.0: enabling device (0400 -> 0403)
[    2.876635] [drm] initializing kernel modesetting (HAINAN 0x1002:0x6660 0x17AA:0x39BC 0x83).
[    2.876649] vga_switcheroo: enabled
[    3.477404] [drm] RC6 on
[    3.477443] hid-generic 0003:25A7:FA23.0004: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Compx 2.4G Receiver] on usb-0000:00:14.0-4/input1
[    3.479864] ATOM BIOS: Lenovo
[    3.479871] [drm] GPU not posted. posting now...
[    3.482028] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.482681] fbcon: inteldrmfb (fb0) is primary device
[    3.483959] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[    3.483960] radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[    3.483971] [drm] Detected VRAM RAM=2048M, BAR=256M
[    3.483972] [drm] RAM width 64bits DDR
[    3.484007] [TTM] Zone  kernel: Available graphics memory: 4005364 kiB
[    3.484008] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    3.484008] [TTM] Initializing pool allocator
[    3.484010] [TTM] Initializing DMA pool allocator
[    3.484022] [drm] radeon: 2048M of VRAM memory ready
[    3.484022] [drm] radeon: 2048M of GTT memory ready.
[    3.484028] [drm] Loading hainan Microcode
[    3.485653] uvcvideo: Found UVC 1.00 device EasyCamera (04f2:b57e)
[    3.487004] [drm] Internal thermal controller without fan control
[    3.487058] [drm] probing gen 2 caps for device 8086:9d10 = 1724043/e
[    3.490426] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[    3.490428] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[    3.490429] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[    3.490494] input: EasyCamera: EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input15
[    3.490552] usbcore: registered new interface driver uvcvideo
[    3.490552] USB Video Class driver (1.1.1)
[    3.495171] [drm] radeon: dpm initialized
[    3.495177] [drm] GART: num cpu pages 524288, num gpu pages 524288
[    3.497044] [drm] probing gen 2 caps for device 8086:9d10 = 1724043/e
[    3.497047] [drm] PCIE gen 3 link speeds already enabled
[    3.504070] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[    3.504184] radeon 0000:01:00.0: WB enabled
[    3.504186] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff9e7756767c00
[    3.504187] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff9e7756767c04
[    3.504188] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff9e7756767c08
[    3.504190] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff9e7756767c0c
[    3.504191] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff9e7756767c10
[    3.504191] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.504192] [drm] Driver supports precise vblank timestamp query.
[    3.504193] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    3.504226] radeon 0000:01:00.0: radeon: using MSI.
[    3.504242] [drm] radeon: irq initialized.
[    3.698549] [drm] ring test on 0 succeeded in 1 usecs
[    3.698553] [drm] ring test on 1 succeeded in 1 usecs
[    3.698557] [drm] ring test on 2 succeeded in 1 usecs
[    3.698565] [drm] ring test on 3 succeeded in 4 usecs
[    3.698571] [drm] ring test on 4 succeeded in 4 usecs
[    3.698721] [drm] ib test on ring 0 succeeded in 0 usecs
[    3.698785] [drm] ib test on ring 1 succeeded in 0 usecs
[    3.698841] [drm] ib test on ring 2 succeeded in 0 usecs
[    3.698863] [drm] ib test on ring 3 succeeded in 0 usecs
[    3.698885] [drm] ib test on ring 4 succeeded in 0 usecs
[    3.699027] [drm] Radeon Display Connectors
[    3.700344] kfd kfd: DID 6660 is missing in supported_devices
[    3.700345] kfd kfd: kgd2kfd_probe failed
[    3.700349] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1
[    3.723695] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC236: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    3.723696] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.723698] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    3.723698] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.723699] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.723700] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[    3.723701] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    3.786857] [drm] amdgpu kernel modesetting enabled.
[    3.786872] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[    3.786948] ATPX version 1, functions 0x00000033
[    3.787050] ATPX Hybrid Graphics
[    3.790455] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    3.791563] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    3.791611] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    3.791655] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    3.791696] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    3.791741] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    3.791783] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    3.791830] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    3.842026] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:03:00.0.bin failed with error -2
[    3.842033] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
[    3.844561] ath10k_pci 0000:03:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 17aa:0827
[    3.844562] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
[    3.844998] ath10k_pci 0000:03:00.0: firmware ver WLAN.RM.4.4.1-00079-QCARMSWPZ-1 api 6 features wowlan,ignore-otp crc32 fd869beb
[    3.911782] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A crc32 20d869c3
[    4.500794] ath10k_pci 0000:03:00.0: Unknown eventid: 118809
[    4.503850] ath10k_pci 0000:03:00.0: Unknown eventid: 90118
[    4.504718] ath10k_pci 0000:03:00.0: htt-ver 3.47 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[    4.612342] ath: EEPROM regdomain: 0x6c
[    4.612343] ath: EEPROM indicates we should expect a direct regpair map
[    4.612345] ath: Country alpha2 being used: 00
[    4.612346] ath: Regpair used: 0x6c
[    4.620274] ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0
[    4.646023] Console: switching to colour frame buffer device 240x67
[    4.672496] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.821484] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    4.852896] r8169 0000:02:00.0 enp2s0: link down
[    4.852976] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    4.862524] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    5.647145] ath10k_pci 0000:03:00.0: Unknown eventid: 118809
[    5.650058] ath10k_pci 0000:03:00.0: Unknown eventid: 90118
[    5.696653] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    6.603423] ath10k_pci 0000:03:00.0: Unknown eventid: 118809
[    6.606336] ath10k_pci 0000:03:00.0: Unknown eventid: 90118
[    6.658492] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    6.792694] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    8.002720] fuse init (API version 7.26)
[   72.885377] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   77.843253] wlp3s0: authenticate with 6c:b0:ce:ac:15:8f
[   77.897780] wlp3s0: send auth to 6c:b0:ce:ac:15:8f (try 1/3)
[   77.899692] wlp3s0: authenticated
[   77.920094] wlp3s0: associate with 6c:b0:ce:ac:15:8f (try 1/3)
[   77.923832] wlp3s0: RX AssocResp from 6c:b0:ce:ac:15:8f (capab=0x411 status=0 aid=4)
[   77.927197] wlp3s0: associated
[   78.007811] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 2719.852232] wlp3s0: deauthenticating from 6c:b0:ce:ac:15:8f by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2719.873850] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2720.316679] PM: suspend entry (deep)
[ 2720.316681] PM: Syncing filesystems ... done.
[ 2720.348987] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 2720.350278] OOM killer disabled.
[ 2720.350278] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2720.351411] Suspending console(s) (use no_console_suspend to debug)
[ 2720.591906] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2720.592058] sd 0:0:0:0: [sda] Stopping disk
[ 2721.350905] ACPI: EC: interrupt blocked
[ 2721.490856] ACPI: Preparing to enter system sleep state S3
[ 2721.491564] ACPI: EC: event blocked
[ 2721.491564] ACPI: EC: EC stopped
[ 2721.491565] PM: Saving platform NVS memory
[ 2721.492201] Disabling non-boot CPUs ...
[ 2721.532554] smpboot: CPU 1 is now offline
[ 2721.591738] smpboot: CPU 2 is now offline
[ 2721.651688] smpboot: CPU 3 is now offline
[ 2721.655860] ACPI: Low-level resume complete
[ 2721.655968] ACPI: EC: EC started
[ 2721.655968] PM: Restoring platform NVS memory
[ 2721.657027] Enabling non-boot CPUs ...
[ 2721.657054] x86: Booting SMP configuration:
[ 2721.657054] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 2721.657432]  cache: parent cpu1 should not be sleeping
[ 2721.657548] CPU1 is up
[ 2721.657567] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 2721.657975]  cache: parent cpu2 should not be sleeping
[ 2721.658107] CPU2 is up
[ 2721.658127] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 2721.658501]  cache: parent cpu3 should not be sleeping
[ 2721.658630] CPU3 is up
[ 2721.661785] ACPI: Waking up from system sleep state S3
[ 2721.666363] ACPI: EC: interrupt unblocked
[ 2722.204290] ACPI: EC: event unblocked
[ 2722.210821] sd 0:0:0:0: [sda] Starting disk
[ 2722.238044] r8169 0000:02:00.0 enp2s0: link down
[ 2722.484154] usb 1-7: reset full-speed USB device number 5 using xhci_hcd
[ 2722.535610] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2722.537968] ata1.00: configured for UDMA/133
[ 2722.814131] usb 1-5: reset high-speed USB device number 3 using xhci_hcd
[ 2723.154144] usb 1-6: reset full-speed USB device number 4 using xhci_hcd
[ 2723.345227] usb 1-7:1.0: rebind failed: -517
[ 2723.345229] usb 1-7:1.1: rebind failed: -517
[ 2723.345452] OOM killer enabled.
[ 2723.345453] Restarting tasks ... 
[ 2723.346014] [drm] RC6 on
[ 2723.371196] [drm] probing gen 2 caps for device 8086:9d10 = 1724043/e
[ 2723.371202] [drm] PCIE gen 3 link speeds already enabled
[ 2723.382541] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 2723.382679] radeon 0000:01:00.0: WB enabled
[ 2723.382682] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff9e7756767c00
[ 2723.382684] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff9e7756767c04
[ 2723.382686] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff9e7756767c08
[ 2723.382688] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff9e7756767c0c
[ 2723.382690] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff9e7756767c10
[ 2723.393386] done.
[ 2723.410325] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4682]
[ 2723.446082] psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1172..]
[ 2723.533987] PM: suspend exit
[ 2723.588171] [drm] ring test on 0 succeeded in 0 usecs
[ 2723.588182] [drm] ring test on 1 succeeded in 1 usecs
[ 2723.588185] [drm] ring test on 2 succeeded in 0 usecs
[ 2723.588198] [drm] ring test on 3 succeeded in 4 usecs
[ 2723.588204] [drm] ring test on 4 succeeded in 3 usecs
[ 2723.588258] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2723.588811] [drm] ib test on ring 1 succeeded in 0 usecs
[ 2723.588866] [drm] ib test on ring 2 succeeded in 0 usecs
[ 2723.588893] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2723.588914] [drm] ib test on ring 4 succeeded in 0 usecs
[ 2723.590512] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[ 2723.590515] Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
[ 2723.619814] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[ 2723.636645] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 2723.666910] r8169 0000:02:00.0 enp2s0: link down
[ 2723.667155] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 2723.670143] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2724.129784] irq 16: nobody cared (try booting with the "irqpoll" option)
[ 2724.129789] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.41-1-lts #1
[ 2724.129790] Hardware name: LENOVO 80VD/Lenovo ideapad FLEX 4-1480, BIOS 2SCN23WW(V2.03) 03/24/2017
[ 2724.129790] Call Trace:
[ 2724.129793]  <IRQ>
[ 2724.129797]  dump_stack+0x5c/0x85
[ 2724.129800]  __report_bad_irq+0x37/0xb1
[ 2724.129802]  note_interrupt.cold.8+0xa/0x70
[ 2724.129804]  ? handle_irq_event_percpu+0x6a/0x80
[ 2724.129805]  ? handle_irq_event+0x39/0x56
[ 2724.129807]  ? handle_fasteoi_irq+0x90/0x140
[ 2724.129808]  ? handle_irq+0x1c/0x30
[ 2724.129810]  ? do_IRQ+0x41/0xd0
[ 2724.129812]  ? common_interrupt+0x7d/0x7d
[ 2724.129812]  </IRQ>
[ 2724.129815]  ? cpuidle_enter_state+0xb9/0x2d0
[ 2724.129816]  ? cpuidle_enter_state+0x94/0x2d0
[ 2724.129818]  ? do_idle+0x1a6/0x1d0
[ 2724.129820]  ? cpu_startup_entry+0x6f/0x80
[ 2724.129822]  ? start_kernel+0x4ac/0x4cc
[ 2724.129823]  ? secondary_startup_64+0xa5/0xb0
[ 2724.129824] handlers:
[ 2724.129828] [<ffffffffc0578920>] idma64_irq [idma64]
[ 2724.129830] [<ffffffffa94e28b0>] i2c_dw_isr
[ 2724.129831] Disabling IRQ #16
[ 2724.475905] ath10k_pci 0000:03:00.0: Unknown eventid: 118809
[ 2724.478904] ath10k_pci 0000:03:00.0: Unknown eventid: 90118
[ 2724.524512] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2725.424693] ath10k_pci 0000:03:00.0: Unknown eventid: 118809
[ 2725.427755] ath10k_pci 0000:03:00.0: Unknown eventid: 90118
[ 2725.475412] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2725.621171] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2730.502729] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2735.508541] wlp3s0: authenticate with 6c:b0:ce:ac:15:8f
[ 2735.563352] wlp3s0: send auth to 6c:b0:ce:ac:15:8f (try 1/3)
[ 2735.568762] wlp3s0: authenticated
[ 2735.584070] wlp3s0: associate with 6c:b0:ce:ac:15:8f (try 1/3)
[ 2735.589726] wlp3s0: RX AssocResp from 6c:b0:ce:ac:15:8f (capab=0x411 status=0 aid=4)
[ 2735.592726] wlp3s0: associated
[ 2735.670060] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 2911.841426] [drm] probing gen 2 caps for device 8086:9d10 = 1724043/e
[ 2911.841433] [drm] PCIE gen 3 link speeds already enabled
[ 2911.858688] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 2911.858827] radeon 0000:01:00.0: WB enabled
[ 2911.858830] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff9e7756767c00
[ 2911.858832] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff9e7756767c04
[ 2911.858833] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff9e7756767c08
[ 2911.858835] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff9e7756767c0c
[ 2911.858837] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff9e7756767c10
[ 2912.052148] [drm] ring test on 0 succeeded in 1 usecs
[ 2912.052153] [drm] ring test on 1 succeeded in 1 usecs
[ 2912.052157] [drm] ring test on 2 succeeded in 1 usecs
[ 2912.052165] [drm] ring test on 3 succeeded in 4 usecs
[ 2912.052170] [drm] ring test on 4 succeeded in 3 usecs
[ 2912.052264] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2912.052350] [drm] ib test on ring 1 succeeded in 0 usecs
[ 2912.052437] [drm] ib test on ring 2 succeeded in 0 usecs
[ 2912.052451] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2912.052462] [drm] ib test on ring 4 succeeded in 0 usecs

journalctl's output is extremly long

Last edited by TheZadok42 (2018-05-22 14:02:43)

ewaller · 2018-05-22 13:50:08

Fix your post using BBCode code tags. https://bbs.archlinux.org/help.php#bbcode

Edit: What are the output of xrandr while running i3?

Last edited by ewaller (2018-05-22 13:51:43)

Slithery · 2018-05-22 13:50:55

Which is why you are expected to post all code and outputs between [code⁣] [/code⁣] tags.
https://wiki.archlinux.org/index.php/Co … s_and_code

I think your problem was expecting anything to happen automatically. You need to configure this yourself.
Look at the xrandr and i3 wiki pages.

Edit - Just noticed that this is a dual-GPU laptop. How have you configured your graphics stack?

Last edited by Slithery (2018-05-22 13:53:44)

TheZadok42 · 2018-05-22 14:03:52

Slithery wrote:

Which is why you are expected to post all code and outputs between [code⁣] [/code⁣] tags.
https://wiki.archlinux.org/index.php/Co … s_and_code
I think your problem was expecting anything to happen automatically. You need to configure this yourself.
Look at the xrandr and i3 wiki pages.
Edit - Just noticed that this is a dual-GPU laptop. How have you configured your graphics stack?

I did no such thing... I am pretty much a noob to Linux (and to Arch)...

TheZadok42 · 2018-05-22 14:08:10

ewaller wrote:

Fix your post using BBCode code tags. https://bbs.archlinux.org/help.php#bbcode
Edit: What are the output of xrandr while running i3?

Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 310mm x 170mm
   1920x1080     59.98*+  59.93  
   1680x1050     59.95    59.88  
   1400x1050     59.98  
   1600x900      60.00    59.95    59.82  
   1280x1024     60.02  
   1400x900      59.96    59.88  
   1280x960      60.00  
   1368x768      60.00    59.88    59.85  
   1280x800      59.81    59.91  
   1280x720      59.86    60.00    59.74  
   1024x768      60.00  
   1024x576      60.00    59.90    59.82  
   960x540       60.00    59.63    59.82  
   800x600       60.32    56.25  
   864x486       60.00    59.92    59.57  
   640x480       59.94  
   720x405       59.51    60.00    58.99  
   640x360       59.84    59.32    60.00  
HDMI1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)

Just to clarify: the cable worked when I used it on my PC and the screen works perfectly

ewaller · 2018-05-22 14:55:16

That HDMI1 disconnected thing is not good. As Slithery notes, this seems to be a dual GPU machine with which I have zero experience. I would bet, however, that the HDMI port is dedicated to which ever GPU you are not using. The Xorg log seems to indicate you are using the Intel GPU. You might try getting the AMD GPU going.

TheZadok42 · 2018-05-22 14:56:43

ewaller wrote:

That HDMI1 disconnected thing is not good. As Slithery notes, this seems to be a dual GPU machine with which I have zero experience. I would bet, however, that the HDMI port is dedicated to which ever GPU you are not using. The Xorg log seems to indicate you are using the Intel GPU. You might try getting the AMD GPU going.

Could it be a hardware problem?

ewaller · 2018-05-22 15:38:53

Not a hardware problem, per se. It might be that there just is no path from the Intel GPU to the HDMI. One theory being that if you are using an external display, you may not be running on batteries and therefore can use the more powerful GPU. They may be using the more moderate Intel GPU for the internal display only. They may also be using the Intel GPU as a frame buffer for the AMD GPU when high performance graphics are needed internally. So, It just may be that HDMI will only work with the AMD. Maybe.

TheZadok42 · 2018-05-22 15:42:24

ewaller wrote:

Not a hardware problem, per se. It might be that there just is no path from the Intel GPU to the HDMI. One theory being that if you are using an external display, you may not be running on batteries and therefore can use the more powerful GPU. They may be using the more moderate Intel GPU for the internal display only. They may also be using the Intel GPU as a frame buffer for the AMD GPU when high performance graphics are needed internally. So, It just may be that HDMI will only work with the AMD. Maybe.

I see
Is there any way to confirm it?

Arch Linux

#1 2018-05-22 11:46:20

Laptop's HDMI output does not work

#2 2018-05-22 13:29:20

Re: Laptop's HDMI output does not work

#3 2018-05-22 13:37:59

Re: Laptop's HDMI output does not work

#4 2018-05-22 13:50:08

Re: Laptop's HDMI output does not work

#5 2018-05-22 13:50:55

Re: Laptop's HDMI output does not work

#6 2018-05-22 14:03:52

Re: Laptop's HDMI output does not work

#7 2018-05-22 14:08:10

Re: Laptop's HDMI output does not work

#8 2018-05-22 14:55:16

Re: Laptop's HDMI output does not work

#9 2018-05-22 14:56:43

Re: Laptop's HDMI output does not work

#10 2018-05-22 15:38:53

Re: Laptop's HDMI output does not work

#11 2018-05-22 15:42:24

Re: Laptop's HDMI output does not work

Board footer