You are not logged in.

Pages: 1

#1 2018-06-08 17:58:15

arruma2160
Member
Registered: 2018-06-07
Posts: 5

HDMI converter to VGA not working on my Arch distro

Hello Community,

During the last hours I have been trying to configure my arch box to work with my monitor so I could have an extra screen for my laptop.

I am using an HDMI converter to VGA but I cannot manage to make my HDMI1 to be "connected".

Please, find below some info that could be relevant for people who are skilled on the topic:

[07:49 PM] -> xrandr 
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 310mm x 170mm
   1366x768      60.00 +
   1280x720      59.86    60.00    59.74  
   1024x768      60.00  
   1024x576      60.00    59.90    59.82  
   960x540       60.00    59.63    59.82  
   800x600       60.32    56.25  
   864x486       60.00    59.92    59.57  
   640x480       59.94  
   720x405       59.51    60.00    58.99  
   680x384       60.00  
   640x360       59.84    59.32    60.00  
   1920x1080_60.00  59.96* 
HDMI1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)

[07:52 PM] -> dmesg | grep -i hdmi
[    6.710096] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[    6.710157] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    6.710217] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18

[07:55 PM] -> lspci 
....
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
....

Thanks in advance! Looking forward to receive suggestions and learning from advice.

Last edited by arruma2160 (2018-06-08 17:59:36)

Offline

#2 2018-06-08 18:36:50

seth
Member
Registered: 2012-09-03
Posts: 51,017

Re: HDMI converter to VGA not working on my Arch distro

Have you tried the connector in any other OS to be sure about it's general functionality?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2018-06-08 18:45:21

arruma2160
Member
Registered: 2018-06-07
Posts: 5

Re: HDMI converter to VGA not working on my Arch distro

Yes, I have tried in a Xubuntu box and it does detect it (e.g. displays HDMI1 connected at xrandr command).
Plus, using a vga to vga cable it works => monitor works.
I do not know much about graphics drivers... any suggestion in that direction?

Offline

#4 2018-06-08 18:55:26

seth
Member
Registered: 2012-09-03
Posts: 51,017

Re: HDMI converter to VGA not working on my Arch distro

please post your xorg log
In general there's xf86-video-intel and the modesetting driver for the X11 layer, but the issue might lie with the kernel module (i915), so also try the LTS kernel behavior.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#5 2018-06-08 19:00:33

arruma2160
Member
Registered: 2018-06-07
Posts: 5

Re: HDMI converter to VGA not working on my Arch distro

How can I try the LTS kernel behavior?

Please, find below the xorg log. 

[    47.634] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[    47.636] 
X.Org X Server 1.20.0
X Protocol Version 11, Revision 0
...
[    47.650] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    47.650] (==) No Layout section.  Using the first Screen section.
[    47.650] (==) No screen section available. Using defaults.
[    47.650] (**) |-->Screen "Default Screen Section" (0)
[    47.650] (**) |   |-->Monitor "<default monitor>"
[    47.651] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    47.651] (==) Automatically adding devices
[    47.651] (==) Automatically enabling devices
[    47.651] (==) Automatically adding GPU devices
[    47.651] (==) Automatically binding GPU devices
[    47.651] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    47.651] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    47.651] 	Entry deleted from font path.
[    47.651] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    47.651] (==) ModulePath set to "/usr/lib/xorg/modules"
[    47.651] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    47.651] (II) Module ABI versions:
[    47.651] 	X.Org ANSI C Emulation: 0.4
[    47.651] 	X.Org Video Driver: 24.0
[    47.651] 	X.Org XInput driver : 24.1
[    47.651] 	X.Org Server Extension : 10.0
[    47.651] (++) using VT number 1

[    47.652] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[    47.653] (II) xfree86: Adding drm device (/dev/dri/card0)
[    47.653] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[    47.655] (--) PCI:*(0@0:2:0) 8086:0a2e:17aa:3978 rev 9, Mem @ 0xb2000000/4194304, 0xa0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[    47.655] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    47.655] (II) LoadModule: "glx"
[    47.655] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    47.656] (II) Module glx: vendor="X.Org Foundation"
[    47.656] 	compiled for 1.20.0, module version = 1.0.0
[    47.656] 	ABI class: X.Org Server Extension, version 10.0
[    47.656] (==) Matched intel as autoconfigured driver 0
[    47.656] (==) Matched modesetting as autoconfigured driver 1
[    47.656] (==) Matched fbdev as autoconfigured driver 2
[    47.656] (==) Matched vesa as autoconfigured driver 3
[    47.656] (==) Assigned the driver to the xf86ConfigLayout
[    47.656] (II) LoadModule: "intel"
[    47.656] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    47.661] (II) Module intel: vendor="X.Org Foundation"
[    47.661] 	compiled for 1.20.0, module version = 2.99.917
[    47.661] 	Module class: X.Org Video Driver
[    47.661] 	ABI class: X.Org Video Driver, version 24.0
[    47.661] (II) LoadModule: "modesetting"
[    47.661] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    47.687] (II) Module modesetting: vendor="X.Org Foundation"
[    47.687] 	compiled for 1.20.0, module version = 1.20.0
[    47.687] 	Module class: X.Org Video Driver
[    47.687] 	ABI class: X.Org Video Driver, version 24.0
[    47.687] (II) LoadModule: "fbdev"
[    47.687] (WW) Warning, couldn't open module fbdev
[    47.687] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    47.687] (II) LoadModule: "vesa"
[    47.687] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    47.688] (II) Module vesa: vendor="X.Org Foundation"
[    47.688] 	compiled for 1.20.0, module version = 2.4.0
[    47.688] 	Module class: X.Org Video Driver
[    47.688] 	ABI class: X.Org Video Driver, version 24.0
[    47.688] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    47.688] (II) intel: Driver for Intel(R) HD Graphics
[    47.688] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    47.688] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    47.688] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    47.688] (II) VESA: driver for VESA chipsets: vesa
[    47.688] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    47.689] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20171222
[    47.689] (II) intel(0): SNA compiled from 2.99.917-831-ge7bfc906
[    47.707] (WW) Falling back to old probe method for modesetting
[    47.707] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    47.730] (--) intel(0): Integrated Graphics Chipset: Intel(R) Iris(TM) Graphics 5100
[    47.730] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[    47.730] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    47.730] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    47.730] (==) intel(0): RGB weight 888
[    47.730] (==) intel(0): Default visual is TrueColor
[    47.730] (II) intel(0): Output eDP1 has no monitor section
[    47.731] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[    47.731] (II) intel(0): Enabled output eDP1
[    47.731] (II) intel(0): Output HDMI1 has no monitor section
[    47.731] (II) intel(0): Enabled output HDMI1
[    47.731] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    47.731] (II) intel(0): Output VIRTUAL1 has no monitor section
[    47.731] (II) intel(0): Enabled output VIRTUAL1
[    47.731] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
[    47.731] (==) intel(0): TearFree disabled
[    47.731] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    47.731] (==) intel(0): DPI set to (96, 96)
[    47.731] (II) Loading sub module "dri3"
[    47.731] (II) LoadModule: "dri3"
[    47.731] (II) Module "dri3" already built-in
[    47.731] (II) Loading sub module "dri2"
[    47.731] (II) LoadModule: "dri2"
[    47.731] (II) Module "dri2" already built-in
[    47.731] (II) Loading sub module "present"
[    47.731] (II) LoadModule: "present"
[    47.731] (II) Module "present" already built-in
[    47.731] (II) UnloadModule: "modesetting"
[    47.731] (II) Unloading modesetting
[    47.731] (II) UnloadModule: "vesa"
[    47.731] (II) Unloading vesa
[    47.735] (II) intel(0): SNA initialized with Haswell (gen7.5, gt3) backend
[    47.735] (==) intel(0): Backing store enabled
[    47.735] (==) intel(0): Silken mouse disabled
[    47.735] (II) intel(0): HW Cursor enabled
[    47.736] (==) intel(0): DPMS enabled
[    47.736] (==) intel(0): Display hotplug detection enabled
[    47.736] (II) intel(0): [DRI2] Setup complete
[    47.736] (II) intel(0): [DRI2]   DRI driver: i965
[    47.736] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    47.736] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[    47.736] (II) intel(0): hardware support for Present enabled
[    47.736] (II) Initializing extension Generic Event Extension
[    47.736] (II) Initializing extension SHAPE
[    47.736] (II) Initializing extension MIT-SHM
[    47.736] (II) Initializing extension XInputExtension
[    47.736] (II) Initializing extension XTEST
[    47.736] (II) Initializing extension BIG-REQUESTS
[    47.736] (II) Initializing extension SYNC
[    47.736] (II) Initializing extension XKEYBOARD
[    47.736] (II) Initializing extension XC-MISC
[    47.736] (II) Initializing extension SECURITY
[    47.736] (II) Initializing extension XFIXES
[    47.736] (II) Initializing extension RENDER
[    47.736] (II) Initializing extension RANDR
[    47.736] (II) Initializing extension COMPOSITE
[    47.736] (II) Initializing extension DAMAGE
[    47.736] (II) Initializing extension MIT-SCREEN-SAVER
[    47.736] (II) Initializing extension DOUBLE-BUFFER
[    47.736] (II) Initializing extension RECORD
[    47.736] (II) Initializing extension DPMS
[    47.736] (II) Initializing extension Present
[    47.736] (II) Initializing extension DRI3
[    47.736] (II) Initializing extension X-Resource
[    47.736] (II) Initializing extension XVideo
[    47.736] (II) Initializing extension XVideo-MotionCompensation
[    47.736] (II) Initializing extension GLX
[    47.916] (II) AIGLX: Loaded and initialized i965
[    47.916] (II) GLX: Initialized DRI2 GL provider for screen 0
[    47.916] (II) Initializing extension XFree86-VidModeExtension
[    47.916] (II) Initializing extension XFree86-DGA
[    47.916] (II) Initializing extension XFree86-DRI
[    47.916] (II) Initializing extension DRI2
[    47.919] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    47.929] (II) intel(0): Setting screen physical size to 361 x 203
[    48.040] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    48.040] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    48.041] (II) LoadModule: "libinput"
[    48.041] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    48.047] (II) Module libinput: vendor="X.Org Foundation"
[    48.047] 	compiled for 1.19.6, module version = 0.27.1
[    48.047] 	Module class: X.Org XInput Driver
[    48.047] 	ABI class: X.Org XInput driver, version 24.1
[    48.047] (II) Using input driver 'libinput' for 'Power Button'
[    48.047] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 15 paused 0
[    48.047] (**) Power Button: always reports core events
[    48.047] (**) Option "Device" "/dev/input/event2"
[    48.047] (**) Option "_source" "server/udev"
[    48.048] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    48.048] (II) event2  - Power Button: device is a keyboard
[    48.048] (II) event2  - Power Button: device removed
[    48.048] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    48.048] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    48.048] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    48.048] (II) event2  - Power Button: device is a keyboard
[    48.048] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[    48.048] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    48.048] (II) Using input driver 'libinput' for 'Video Bus'
[    48.049] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 18 paused 0
[    48.049] (**) Video Bus: always reports core events
[    48.049] (**) Option "Device" "/dev/input/event12"
[    48.049] (**) Option "_source" "server/udev"
[    48.049] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[    48.049] (II) event12 - Video Bus: device is a keyboard
[    48.049] (II) event12 - Video Bus: device removed
[    48.049] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15/event12"
[    48.049] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    48.050] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[    48.050] (II) event12 - Video Bus: device is a keyboard
[    48.050] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    48.050] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    48.050] (II) Using input driver 'libinput' for 'Power Button'
[    48.050] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 19 paused 0
[    48.050] (**) Power Button: always reports core events
[    48.050] (**) Option "Device" "/dev/input/event1"
[    48.050] (**) Option "_source" "server/udev"
[    48.051] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    48.051] (II) event1  - Power Button: device is a keyboard
[    48.051] (II) event1  - Power Button: device removed
[    48.051] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    48.051] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    48.051] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    48.051] (II) event1  - Power Button: device is a keyboard
[    48.052] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    48.052] (II) No input driver specified, ignoring this device.
[    48.052] (II) This device may have been added with another device file.
[    48.052] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event13)
[    48.052] (II) No input driver specified, ignoring this device.
[    48.052] (II) This device may have been added with another device file.
[    48.052] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event14)
[    48.052] (II) No input driver specified, ignoring this device.
[    48.052] (II) This device may have been added with another device file.
[    48.052] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event15)
[    48.052] (II) No input driver specified, ignoring this device.
[    48.052] (II) This device may have been added with another device file.
[    48.053] (II) config/udev: Adding input device Logitech K270 (/dev/input/event5)
[    48.053] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"
[    48.053] (II) Using input driver 'libinput' for 'Logitech K270'
[    48.053] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 20 paused 0
[    48.053] (**) Logitech K270: always reports core events
[    48.053] (**) Option "Device" "/dev/input/event5"
[    48.053] (**) Option "_source" "server/udev"
[    48.054] (II) event5  - Logitech K270: is tagged by udev as: Keyboard
[    48.054] (II) event5  - Logitech K270: device is a keyboard
[    48.054] (II) event5  - Logitech K270: device removed
[    48.054] (II) libinput: Logitech K270: needs a virtual subdevice
[    48.054] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4003.0005/input/input8/event5"
[    48.054] (II) XINPUT: Adding extended input device "Logitech K270" (type: MOUSE, id 9)
[    48.054] (**) Option "AccelerationScheme" "none"
[    48.054] (**) Logitech K270: (accel) selected scheme none/0
[    48.054] (**) Logitech K270: (accel) acceleration factor: 2.000
[    48.054] (**) Logitech K270: (accel) acceleration threshold: 4
[    48.054] (II) event5  - Logitech K270: is tagged by udev as: Keyboard
[    48.054] (II) event5  - Logitech K270: device is a keyboard
[    48.055] (II) config/udev: Adding input device Logitech M185 (/dev/input/event4)
[    48.055] (**) Logitech M185: Applying InputClass "libinput pointer catchall"
[    48.055] (II) Using input driver 'libinput' for 'Logitech M185'
[    48.055] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 21 paused 0
[    48.055] (**) Logitech M185: always reports core events
[    48.055] (**) Option "Device" "/dev/input/event4"
[    48.055] (**) Option "_source" "server/udev"
[    48.056] (II) event4  - Logitech M185: is tagged by udev as: Mouse
[    48.056] (II) event4  - Logitech M185: device set to 800 DPI
[    48.056] (II) event4  - Logitech M185: device is a pointer
[    48.056] (II) event4  - Logitech M185: device removed
[    48.056] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4008.0004/input/input7/event4"
[    48.056] (II) XINPUT: Adding extended input device "Logitech M185" (type: MOUSE, id 10)
[    48.056] (**) Option "AccelerationScheme" "none"
[    48.056] (**) Logitech M185: (accel) selected scheme none/0
[    48.056] (**) Logitech M185: (accel) acceleration factor: 2.000
[    48.056] (**) Logitech M185: (accel) acceleration threshold: 4
[    48.057] (II) event4  - Logitech M185: is tagged by udev as: Mouse
[    48.057] (II) event4  - Logitech M185: device set to 800 DPI
[    48.057] (II) event4  - Logitech M185: device is a pointer
[    48.057] (II) config/udev: Adding input device Logitech M185 (/dev/input/mouse0)
[    48.057] (II) No input driver specified, ignoring this device.
[    48.057] (II) This device may have been added with another device file.
[    48.058] (II) config/udev: Adding input device Lenovo EasyCamera: Lenovo EasyC (/dev/input/event16)
[    48.058] (**) Lenovo EasyCamera: Lenovo EasyC: Applying InputClass "libinput keyboard catchall"
[    48.058] (II) Using input driver 'libinput' for 'Lenovo EasyCamera: Lenovo EasyC'
[    48.059] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 22 paused 0
[    48.059] (**) Lenovo EasyCamera: Lenovo EasyC: always reports core events
[    48.059] (**) Option "Device" "/dev/input/event16"
[    48.059] (**) Option "_source" "server/udev"
[    48.059] (II) event16 - Lenovo EasyCamera: Lenovo EasyC: is tagged by udev as: Keyboard
[    48.059] (II) event16 - Lenovo EasyCamera: Lenovo EasyC: device is a keyboard
[    48.059] (II) event16 - Lenovo EasyCamera: Lenovo EasyC: device removed
[    48.060] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input19/event16"
[    48.060] (II) XINPUT: Adding extended input device "Lenovo EasyCamera: Lenovo EasyC" (type: KEYBOARD, id 11)
[    48.060] (II) event16 - Lenovo EasyCamera: Lenovo EasyC: is tagged by udev as: Keyboard
[    48.060] (II) event16 - Lenovo EasyCamera: Lenovo EasyC: device is a keyboard
[    48.061] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[    48.061] (II) No input driver specified, ignoring this device.
[    48.061] (II) This device may have been added with another device file.
[    48.061] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[    48.061] (II) No input driver specified, ignoring this device.
[    48.061] (II) This device may have been added with another device file.
[    48.061] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[    48.061] (II) No input driver specified, ignoring this device.
[    48.061] (II) This device may have been added with another device file.
[    48.062] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event10)
[    48.062] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[    48.062] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[    48.063] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 23 paused 0
[    48.063] (**) Ideapad extra buttons: always reports core events
[    48.063] (**) Option "Device" "/dev/input/event10"
[    48.063] (**) Option "_source" "server/udev"
[    48.063] (II) event10 - Ideapad extra buttons: is tagged by udev as: Keyboard
[    48.063] (II) event10 - Ideapad extra buttons: device is a keyboard
[    48.063] (II) event10 - Ideapad extra buttons: device removed
[    48.063] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input14/event10"
[    48.063] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 12)
[    48.064] (II) event10 - Ideapad extra buttons: is tagged by udev as: Keyboard
[    48.064] (II) event10 - Ideapad extra buttons: device is a keyboard
[    48.065] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    48.065] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    48.065] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    48.065] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 24 paused 0
[    48.065] (**) AT Translated Set 2 keyboard: always reports core events
[    48.065] (**) Option "Device" "/dev/input/event3"
[    48.065] (**) Option "_source" "server/udev"
[    48.066] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    48.066] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    48.066] (II) event3  - AT Translated Set 2 keyboard: device removed
[    48.066] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    48.066] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    48.067] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    48.067] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    48.067] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[    48.067] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    48.067] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    48.068] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 25 paused 0
[    48.068] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    48.068] (**) Option "Device" "/dev/input/event11"
[    48.068] (**) Option "_source" "server/udev"
[    48.069] (II) event11 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[    48.069] (II) event11 - SynPS/2 Synaptics TouchPad: device is a touchpad
[    48.069] (II) event11 - SynPS/2 Synaptics TouchPad: device removed
[    48.069] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event11"
[    48.069] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[    48.069] (**) Option "AccelerationScheme" "none"
[    48.069] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    48.069] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    48.069] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    48.070] (II) event11 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[    48.070] (II) event11 - SynPS/2 Synaptics TouchPad: device is a touchpad
[    48.070] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    48.070] (II) No input driver specified, ignoring this device.
[    48.070] (II) This device may have been added with another device file.
[    48.070] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    48.070] (II) No input driver specified, ignoring this device.
[    48.070] (II) This device may have been added with another device file.
[    48.079] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"
[    48.079] (II) Using input driver 'libinput' for 'Logitech K270'
[    48.079] (II) systemd-logind: returning pre-existing fd for /dev/input/event5 13:69
[    48.079] (**) Logitech K270: always reports core events
[    48.079] (**) Option "Device" "/dev/input/event5"
[    48.079] (**) Option "_source" "_driver/libinput"
[    48.079] (II) libinput: Logitech K270: is a virtual subdevice
[    48.079] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:4003.0005/input/input8/event5"
[    48.079] (II) XINPUT: Adding extended input device "Logitech K270" (type: KEYBOARD, id 15)
[    48.629] (II) intel(0): resizing framebuffer to 1920x1080
[    48.646] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    50.046] (II) intel(0): EDID vendor "CMN", prod id 5264
[    50.046] (II) intel(0): Printing DDC gathered Modelines:
[    50.046] (II) intel(0): Modeline "1366x768"x0.0   76.42  1366 1434 1479 1592  768 772 779 800 -hsync -vsync (48.0 kHz eP)

Last edited by arruma2160 (2018-06-08 19:03:30)

Offline

#6 2018-06-08 19:05:46

seth
Member
Registered: 2012-09-03
Posts: 51,017

Re: HDMI converter to VGA not working on my Arch distro

So first test: remove xf86-video-intel (it has trouble w/ the 1.20 server anyway)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2018-06-08 19:11:07

arruma2160
Member
Registered: 2018-06-07
Posts: 5

Re: HDMI converter to VGA not working on my Arch distro

[09:11 PM] -> sudo pacman -R xf86-video-intel 

Packages (1) xf86-video-intel-1:2.99.917+831+ge7bfc906-1

Total Removed Size:  2.18 MiB

:: Do you want to remove these packages? [Y/n] 
:: Processing package changes...
(1/1) removing xf86-video-intel                                [##################################] 100%
:: Running post-transaction hooks...
(1/1) Arming ConditionNeedsUpdate...

[09:11 PM] -> xrandr
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 310mm x 170mm
   1366x768      60.00 +
   1280x720      59.86    60.00    59.74  
   1024x768      60.00  
   1024x576      60.00    59.90    59.82  
   960x540       60.00    59.63    59.82  
   800x600       60.32    56.25  
   864x486       60.00    59.92    59.57  
   640x480       59.94  
   720x405       59.51    60.00    58.99  
   680x384       60.00  
   640x360       59.84    59.32    60.00  
   1920x1080_60.00  59.96* 
HDMI1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis

Last edited by arruma2160 (2018-06-08 19:11:29)

Offline

#8 2018-06-08 19:18:46

seth
Member
Registered: 2012-09-03
Posts: 51,017

Re: HDMI converter to VGA not working on my Arch distro

Thought as much; try the LTS kernel and watch dmesg for messages from i915
Also the attachment order could matter - ensure the powered monitor is plugged into the adapter before plugging the adapter into HDMI. Ensure to have tried booting w/ the adapter + monitor plugged. (The HDMI handshake is rather fragile)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#9 2018-06-09 13:16:17

arruma2160
Member
Registered: 2018-06-07
Posts: 5

Re: HDMI converter to VGA not working on my Arch distro

Seth, sorry for the delay.
Following your advice I have tried the LTS kernel but with no more luck than previously.

Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 309mm x 174mm
   1366x768      60.00 +
   1280x720      60.00    59.99    59.86    59.74  
   1024x768      60.04    60.00  
   960x720       60.00  
   928x696       60.05  
   896x672       60.01  
   1024x576      59.95    59.96    59.90    59.82  
   960x600       59.93    60.00  
   960x540       59.96    59.99    59.63    59.82  
   800x600       60.00    60.32    56.25  
   840x525       60.01    59.88  
   864x486       59.92    59.57  
   700x525       59.98  
   800x450       59.95    59.82  
   640x512       60.02  
   700x450       59.96    59.88  
   640x480       60.00    59.94  
   720x405       59.51    58.99  
   684x384       59.88    59.85  
   640x400       59.88    59.98  
   640x360       59.86    59.83    59.84    59.32  
   512x384       60.00  
   512x288       60.00    59.92  
   480x270       59.63    59.82  
   400x300       60.32    56.34  
   432x243       59.92    59.57  
   320x240       60.05  
   360x202       59.51    59.13  
   320x180       59.84    59.32  
   1920x1080_60.00  59.96* 
HDMI-1 disconnected (normal left inverted right x axis y axis)
[03:16 PM] -> dmesg | grep HDMI
[    3.456095] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[    3.456155] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[    3.456208] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17

Any further suggestions?

Offline

Pages: 1

Board footer

Powered by FluxBB