[SOLVED]High load average and several users logged in

jbenge1 · 2018-07-03 15:49:42

After having my machine up and running for a few hours I without fail end up with extremely high load averages (usually > 10 with 4 cores). The output of w indicates that I have 3 users logged in even after having just rebooted the machine and being the only one who uses the machine. This is after being up for a few minutes

$ w
 17:41:29 up 5 min,  3 users,  load average: 0.52, 0.45, 0.24
USER     TTY        LOGIN@   IDLE   JCPU   PCPU WHAT
justin   tty1      17:36    5:15   5.98s  0.00s /bin/sh /usr/bin/startkde
justin   pts/0     17:36    4:59   0.00s  0.63s kded5 [kdeinit5]                                      
justin   pts/1     17:41    1.00s  0.00s  0.00s w

And I can't seem to find the pid of pts/0 to see if stopping that changes anything

$ ps aux | grep pts/1
justin    3015  0.0  0.0  16380  4060 pts/1    Ss   17:41   0:00 /bin/bash
justin    3133  0.0  0.0  34288  3492 pts/1    R+   17:48   0:00 ps aux
justin    3134  0.0  0.0  10900  2260 pts/1    S+   17:48   0:00 grep pts/1
$ ps aux | grep pts/0
justin    3136  0.0  0.0  10900  2320 pts/1    S+   17:48   0:00 grep pts/0

I don't think this behavior is normal? How would I go about fixing/debugging this? (unless its normal in which case my b)

Last edited by jbenge1 (2018-07-07 10:26:32)

Trilby · 2018-07-03 15:58:09

This seems to be an XY problem. Do you want to solve the high load issue? If so, I'm pretty sure none of what you have shown is relevant to that. It is normal to have mulitple entries from `w` output like that. I'm not familiar with kded5 specifically, but I don't use kde - it doesn't strike me as odd. Check the ps output for kded5 not the pts. But in any case, I suspect this is all a red herring and has nothing to do with the actual problem of high load.

Instead of assuming it has to do with the `w` output, you should check ps, top, or htop output to see what is actually using the cpu resources.

Last edited by Trilby (2018-07-03 17:06:10)

V1del · 2018-07-03 16:02:00

Something that does strike me as odd in this particular output is that startkde seems to still be a part of a shell. How are you starting it exactly?

However I agree, the original premise reads like an XY.

Last edited by V1del (2018-07-03 16:02:32)

jbenge1 · 2018-07-03 16:40:19

My bad! I forgot correlation != causation, I just assumed because whenever I saw high load averages I had upwards of 5 or 6 users being registered as logged in...

At any rate, I would much rather debug the high load averages as (I may be falling prey to correlation not equaling causation....) as it seems to make create a non responsive terminal when they start getting into the double digits. What should I be looking at to try and debug this?

Slithery · 2018-07-03 17:03:40

Trilby wrote:

Instead of assuming it has to doe with the `w` output, you should check ps, top, or htop output to see what is actually using the cpu resources.

jbenge1 · 2018-07-03 17:12:30

neither top, or iotop show anything that seems suspicious aside from having several processes in an 'uninterruptible sleep' state and I haven't found any way to kill these processes and I'm not sure how they even enter this state or how to stop this. (At this point I'm assuming this is what is causing my problem)

Trilby · 2018-07-03 19:06:12

jbenge1 wrote:

neither top, or iotop show anything that seems suspicious ...

What do you define as suspicious? You mean they don't show any processes with significant CPU use? That's highly unlikely.

jbenge1 wrote:

At this point I'm assuming ...

That's what we're trying to get away from. Please post the ouput of the following:

uptime

ps aux | sort -rk3 | head

jbenge1 · 2018-07-03 20:58:46

barring firefox, nothing shows higher than ~5% cpu use....

$ uptime
 22:58:00 up  5:21,  3 users,  load average: 4.72, 2.84, 2.32

$ ps aux | sort -rk3 | head
USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
justin    2874  5.3  5.2 2167132 420124 ?      Sl   17:36  16:57 /usr/lib/firefox/firefox -contentproc -childID 4 -isForBrowser -prefsLen 17658 -schedulerPrefs 0001,2 -greomni /usr/lib/firefox/omni.ja -appomni /usr/lib/firefox/browser/omni.ja -appdir /usr/lib/firefox/browser 2651 true tab
justin    2651  3.7  7.9 10132140 642348 ?     Sl   17:36  11:54 /usr/lib/firefox/firefox
justin    2850  3.4  6.6 2350888 539116 ?      Sl   17:36  10:51 /usr/lib/firefox/firefox -contentproc -childID 3 -isForBrowser -prefsLen 17658 -schedulerPrefs 0001,2 -greomni /usr/lib/firefox/omni.ja -appomni /usr/lib/firefox/browser/omni.ja -appdir /usr/lib/firefox/browser 2651 true tab
root      9584  1.2  1.1 408240 92844 tty1     Ssl+ 17:36   3:59 /usr/lib/Xorg -nolisten tcp -auth /var/run/sddm/{aa5c2e17-47fe-4072-82ee-1469f7ec0808} -background none -noreset -displayfd 17 -seat seat0 vt1
justin    3045  1.1  3.6 2263924 290908 ?      Sl   17:45   3:39 /usr/lib/firefox/firefox -contentproc -childID 6 -isForBrowser -prefsLen 17654 -schedulerPrefs 0001,2 -greomni /usr/lib/firefox/omni.ja -appomni /usr/lib/firefox/browser/omni.ja -appdir /usr/lib/firefox/browser 2651 true tab
justin   25732  1.0  2.1 3442548 174436 ?      Rl   17:36   3:28 /usr/bin/kwin_x11 -session 101bc1b714c103000152632864800000175790004_1528831875_942078
justin    2725  0.6  2.7 2194940 218200 ?      Sl   17:36   2:04 /usr/lib/firefox/firefox -contentproc -childID 1 -isForBrowser -prefsLen 14087 -schedulerPrefs 0001,2 -greomni /usr/lib/firefox/omni.ja -appomni /usr/lib/firefox/browser/omni.ja -appdir /usr/lib/firefox/browser 2651 true tab
justin   25803  0.1  2.1 4449532 169292 ?      Sl   17:36   0:22 /usr/bin/plasmashell
justin   25914  0.1  0.1 1602432 12840 ?       Ssl  17:36   0:28 /usr/bin/pulseaudio --daemonize=no

seth · 2018-07-03 22:14:48

Load average doesn't indicate cpu load, but the amount of running or uninterruptable processes. Eg. the kwin_x11 process would fall into that category.
The system is busy (or waiting for IO), but not necessarily stressed.

ps -e -o stat,pcpu,command | grep -E '^[^ ]*(R|D)'

jbenge1 · 2018-07-06 05:24:53

Here's the output!

$ ps -e -o stat,pcpu,command | grep -E '^[^ ]*(R|D)'
R+    0.0 ps -e -o stat,pcpu,command
D     0.0 [kworker/2:2]
D     0.0 [kworker/3:2]
D     0.0 [kworker/u8:6]
D     0.0 [kworker/u8:14]
D     0.0 hdparm -B 1 /dev/sda

Last edited by jbenge1 (2018-07-06 05:25:39)

seth · 2018-07-06 05:43:43

1st.: there's a blocked hdparm power management process. If that doesn't go away, you should check the drives sanity. https://wiki.archlinux.org/index.php/SMART

2nd. are some kworker threads. They could relate to a drive issue or (both) might be due to acpi interrupts.

grep . -r /sys/firmware/acpi/interrupts

What hardware is that actually? Notebook? Desktop? Maybe best post a complete dmesg dump for the records.

jbenge1 · 2018-07-06 07:13:25

It is a notebook

grep . -r /sys/firmware/acpi/interrupts
/sys/firmware/acpi/interrupts/gpe2F:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe23:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe5D:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe51:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe1F:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe13:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe4D:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe41:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe7B:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe0F:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe03:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe3D:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe31:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe6B:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe2D:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe21:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe5B:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe1D:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/ff_pwr_btn:       0  EN     enabled      unmasked
/sys/firmware/acpi/interrupts/gpe78:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe11:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe4B:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe0D:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe68:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe01:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe3B:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe58:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe2B:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/ff_rt_clk:       0         disabled     unmasked
/sys/firmware/acpi/interrupts/ff_pmtimer:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe48:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe1B:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe76:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe38:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe0B:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe66:     104  EN     enabled      unmasked
/sys/firmware/acpi/interrupts/gpe28:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe56:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe18:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe46:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe74:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe08:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe36:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe64:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe26:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/error:       0
/sys/firmware/acpi/interrupts/gpe54:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe16:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/sci:    1405
/sys/firmware/acpi/interrupts/gpe44:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe7E:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe72:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe06:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe34:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe6E:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe62:       0  EN     enabled      unmasked
/sys/firmware/acpi/interrupts/gpe24:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe5E:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe52:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe14:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe4E:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe42:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe7C:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe70:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe04:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe3E:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe32:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe6C:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe60:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe2E:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe22:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe5C:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe50:    1301  EN     enabled      unmasked
/sys/firmware/acpi/interrupts/gpe1E:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe79:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe12:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe4C:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe40:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe7A:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe0E:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe69:       0  EN     enabled      unmasked
/sys/firmware/acpi/interrupts/gpe02:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe3C:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe30:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe6A:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe59:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe2C:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe20:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe5A:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe49:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe1C:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe77:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe10:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe4A:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe39:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe0C:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe67:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe00:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe3A:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe_all:    1405
/sys/firmware/acpi/interrupts/gpe29:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe57:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe2A:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe19:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe47:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe1A:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe75:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe09:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe37:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe0A:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe65:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe27:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe55:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe17:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe45:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe7F:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe73:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/ff_gbl_lock:       0         disabled     unmasked
/sys/firmware/acpi/interrupts/gpe07:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/sci_not:       0
/sys/firmware/acpi/interrupts/gpe35:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe6F:       0  EN     enabled      unmasked
/sys/firmware/acpi/interrupts/gpe63:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe25:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe5F:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe53:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe15:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe4F:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe43:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe7D:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe71:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe05:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe3F:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe33:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe6D:       0  EN     enabled      unmasked
/sys/firmware/acpi/interrupts/ff_slp_btn:       0         invalid      unmasked
/sys/firmware/acpi/interrupts/gpe61:       0  EN     enabled      unmasked

And the output of dmesg

[ 5104.827903] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 5104.827909] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 5105.266513] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 5105.266522] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 5105.266528] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 5105.304072] ata1.00: configured for UDMA/133
[ 5105.321183] PM: Using 3 thread(s) for compression
[ 5105.321187] PM: Compressing and saving image data (735235 pages)...
[ 5105.321230] PM: Image saving progress:   0%
[ 5105.640493] PM: Image saving progress:  10%
[ 5106.670189] PM: Image saving progress:  20%
[ 5107.606444] PM: Image saving progress:  30%
[ 5108.244220] PM: Image saving progress:  40%
[ 5109.247171] PM: Image saving progress:  50%
[ 5109.613646] PM: Image saving progress:  60%
[ 5110.406446] PM: Image saving progress:  70%
[ 5110.887052] PM: Image saving progress:  80%
[ 5111.702491] PM: Image saving progress:  90%
[ 5112.199341] PM: Image saving progress: 100%
[ 5112.645877] PM: Image saving done
[ 5112.645886] PM: Wrote 2940940 kbytes in 7.32 seconds (401.76 MB/s)
[ 5112.646722] PM: S|
[ 5112.750546] Suspending console(s) (use no_console_suspend to debug)
[ 5112.763944] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 5112.780299] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 5112.781480] sd 0:0:0:0: [sda] Stopping disk
[ 5112.944772] sd 1:0:0:0: [sdb] Stopping disk
[ 5113.627175] ACPI: EC: interrupt blocked
[ 5113.664131] ACPI: Preparing to enter system sleep state S3
[ 5113.667250] ACPI: EC: event blocked
[ 5113.667251] ACPI: EC: EC stopped
[ 5113.667253] PM: Saving platform NVS memory
[ 5113.667316] Disabling non-boot CPUs ...
[ 5113.714634] smpboot: CPU 1 is now offline
[ 5113.758893] smpboot: CPU 2 is now offline
[ 5113.797877] smpboot: CPU 3 is now offline
[ 5113.801443] ACPI: Low-level resume complete
[ 5113.801527] ACPI: EC: EC started
[ 5113.801528] PM: Restoring platform NVS memory
[ 5113.802353] Enabling non-boot CPUs ...
[ 5113.802382] x86: Booting SMP configuration:
[ 5113.802383] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 5113.802897]  cache: parent cpu1 should not be sleeping
[ 5113.803053] CPU1 is up
[ 5113.803071] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 5113.803597]  cache: parent cpu2 should not be sleeping
[ 5113.803753] CPU2 is up
[ 5113.803771] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 5113.804252]  cache: parent cpu3 should not be sleeping
[ 5113.804403] CPU3 is up
[ 5113.808104] ACPI: Waking up from system sleep state S3
[ 5113.818102] ACPI: EC: interrupt unblocked
[ 5113.852712] ACPI: EC: event unblocked
[ 5113.852962] usb usb1: root hub lost power or was reset
[ 5113.852965] usb usb2: root hub lost power or was reset
[ 5113.854463] sd 0:0:0:0: [sda] Starting disk
[ 5113.854465] sd 1:0:0:0: [sdb] Starting disk
[ 5113.856357] rtc_cmos 00:01: Alarms can be up to one month in the future
[ 5113.861508] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[ 5114.167668] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5114.168972] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 5114.168977] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 5114.168980] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 5114.170916] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 5114.170920] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 5114.170924] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 5114.171274] ata2.00: configured for UDMA/100
[ 5114.171281] ahci 0000:00:17.0: port does not support device sleep
[ 5114.203868] usb 1-6: reset high-speed USB device number 2 using xhci_hcd
[ 5114.467154] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[ 5114.610283] acpi LNXPOWER:13: Turning OFF
[ 5114.610501] acpi LNXPOWER:12: Turning OFF
[ 5114.610673] acpi LNXPOWER:11: Turning OFF
[ 5114.610845] acpi LNXPOWER:10: Turning OFF
[ 5114.611014] acpi LNXPOWER:0f: Turning OFF
[ 5114.611184] acpi LNXPOWER:0e: Turning OFF
[ 5114.611352] acpi LNXPOWER:0d: Turning OFF
[ 5114.611523] acpi LNXPOWER:0c: Turning OFF
[ 5114.611692] acpi LNXPOWER:0b: Turning OFF
[ 5114.611861] acpi LNXPOWER:0a: Turning OFF
[ 5114.612030] acpi LNXPOWER:09: Turning OFF
[ 5114.612199] acpi LNXPOWER:08: Turning OFF
[ 5114.612367] acpi LNXPOWER:07: Turning OFF
[ 5114.612536] acpi LNXPOWER:06: Turning OFF
[ 5114.612704] acpi LNXPOWER:05: Turning OFF
[ 5114.612874] acpi LNXPOWER:04: Turning OFF
[ 5114.613044] acpi LNXPOWER:03: Turning OFF
[ 5114.613213] acpi LNXPOWER:02: Turning OFF
[ 5114.613381] acpi LNXPOWER:01: Turning OFF
[ 5114.613550] acpi LNXPOWER:00: Turning OFF
[ 5114.614700] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[ 5114.615699] Bluetooth: hci0: Device revision is 16
[ 5114.615701] Bluetooth: hci0: Secure boot is enabled
[ 5114.615703] Bluetooth: hci0: OTP lock is enabled
[ 5114.615704] Bluetooth: hci0: API lock is enabled
[ 5114.615705] Bluetooth: hci0: Debug lock is disabled
[ 5114.615707] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 5114.615712] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[ 5114.646537] PM: Basic memory bitmaps freed
[ 5114.646539] OOM killer enabled.
[ 5114.646539] Restarting tasks ... done.
[ 5114.658273] PM: hibernation exit
[ 5116.106234] Bluetooth: hci0: Waiting for firmware download to complete
[ 5116.106628] Bluetooth: hci0: Firmware loaded in 1457766 usecs
[ 5116.106739] Bluetooth: hci0: Waiting for device to boot
[ 5116.118766] Bluetooth: hci0: Device booted in 11829 usecs
[ 5116.118783] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[ 5116.121608] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 5116.380389] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5116.396571] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 5116.396587] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 5116.396592] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 5116.461942] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 5116.461954] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 5116.461963] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 5116.499056] ata1.00: configured for UDMA/133
[ 5118.198305] wlp2s0: authenticate with 30:91:8f:a8:b9:37
[ 5118.206199] wlp2s0: send auth to 30:91:8f:a8:b9:37 (try 1/3)
[ 5118.214303] wlp2s0: authenticated
[ 5118.217073] wlp2s0: associate with 30:91:8f:a8:b9:37 (try 1/3)
[ 5118.220754] wlp2s0: RX AssocResp from 30:91:8f:a8:b9:37 (capab=0x411 status=0 aid=3)
[ 5118.233610] wlp2s0: associated
[ 5467.042008] asus_wmi: Unknown key cf pressed
[ 8745.097835] asus_wmi: Unknown key cf pressed
[11945.049078] PM: hibernation entry
[11945.059572] PM: Syncing filesystems ... 
[11945.083042] PM: done.
[11945.083044] Freezing user space processes ... (elapsed 0.001 seconds) done.
[11945.084670] OOM killer disabled.
[11945.084860] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[11945.084863] PM: Marking nosave pages: [mem 0x0009c000-0x000fffff]
[11945.084870] PM: Marking nosave pages: [mem 0x93bde000-0x93bdffff]
[11945.084873] PM: Marking nosave pages: [mem 0x99b2a000-0x9b37efff]
[11945.085114] PM: Marking nosave pages: [mem 0x9b3ff000-0xffffffff]
[11945.087857] PM: Basic memory bitmaps created
[11945.087859] PM: Preallocating image memory... done (allocated 746745 pages)
[11945.623207] PM: Allocated 2986980 kbytes in 0.53 seconds (5635.81 MB/s)
[11945.623207] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[11945.837597] Suspending console(s) (use no_console_suspend to debug)
[11945.837737] wlp2s0: deauthenticating from 30:91:8f:a8:b9:37 by local choice (Reason: 3=DEAUTH_LEAVING)
[11946.238077] ACPI: EC: interrupt blocked
[11946.253830] Disabling non-boot CPUs ...
[11946.305059] smpboot: CPU 1 is now offline
[11946.345742] smpboot: CPU 2 is now offline
[11946.388298] smpboot: CPU 3 is now offline
[11946.390500] PM: Creating hibernation image:
[11946.485292] PM: Need to copy 746030 pages
[11946.485293] PM: Normal pages needed: 746030 + 1024, available pages: 1321071
[11947.234548] PM: Hibernation image created (746030 pages copied)
[11946.392011] Enabling non-boot CPUs ...
[11946.392049] x86: Booting SMP configuration:
[11946.392049] smpboot: Booting Node 0 Processor 1 APIC 0x2
[11946.392487]  cache: parent cpu1 should not be sleeping
[11946.392598] CPU1 is up
[11946.392615] smpboot: Booting Node 0 Processor 2 APIC 0x1
[11946.393046]  cache: parent cpu2 should not be sleeping
[11946.393168] CPU2 is up
[11946.393187] smpboot: Booting Node 0 Processor 3 APIC 0x3
[11946.393589]  cache: parent cpu3 should not be sleeping
[11946.393715] CPU3 is up
[11946.396821] ACPI: EC: interrupt unblocked
[11946.417379] rtc_cmos 00:01: Alarms can be up to one month in the future
[11946.734573] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[11946.734609] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[11946.736247] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[11946.736253] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[11946.736258] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[11946.739600] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[11946.739624] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[11946.739631] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[11946.740040] ata2.00: configured for UDMA/100
[11946.740054] ahci 0000:00:17.0: port does not support device sleep
[11946.749777] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[11946.749783] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[11946.749787] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[11946.762783] PM: Using 3 thread(s) for compression
[11946.762786] PM: Compressing and saving image data (747488 pages)...
[11946.762819] PM: Image saving progress:   0%
[11947.096290] PM: Image saving progress:  10%
[11947.173175] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[11947.173178] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[11947.173180] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[11947.210015] ata1.00: configured for UDMA/133
[11947.610297] PM: Image saving progress:  20%
[11948.260505] PM: Image saving progress:  30%
[11948.928060] PM: Image saving progress:  40%
[11949.822219] PM: Image saving progress:  50%
[11950.446091] PM: Image saving progress:  60%
[11951.112415] PM: Image saving progress:  70%
[11951.750056] PM: Image saving progress:  80%
[11952.407113] asus_wmi: Unknown key cf pressed
[11952.473014] PM: Image saving progress:  90%
[11953.004988] PM: Image saving progress: 100%
[11953.416743] PM: Image saving done
[11953.416752] PM: Wrote 2989952 kbytes in 6.65 seconds (449.61 MB/s)
[11953.417495] PM: S|
[11953.519675] Suspending console(s) (use no_console_suspend to debug)
[11953.536293] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[11953.547228] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[11953.548128] sd 0:0:0:0: [sda] Stopping disk
[11953.661119] sd 1:0:0:0: [sdb] Stopping disk
[11954.389656] ACPI: EC: interrupt blocked
[11954.427398] ACPI: Preparing to enter system sleep state S3
[11954.430531] ACPI: EC: event blocked
[11954.430533] ACPI: EC: EC stopped
[11954.430534] PM: Saving platform NVS memory
[11954.430599] Disabling non-boot CPUs ...
[11954.482156] smpboot: CPU 1 is now offline
[11954.521198] smpboot: CPU 2 is now offline
[11954.554483] smpboot: CPU 3 is now offline
[11954.558226] ACPI: Low-level resume complete
[11954.558311] ACPI: EC: EC started
[11954.558312] PM: Restoring platform NVS memory
[11954.559137] Enabling non-boot CPUs ...
[11954.559167] x86: Booting SMP configuration:
[11954.559168] smpboot: Booting Node 0 Processor 1 APIC 0x2
[11954.559681]  cache: parent cpu1 should not be sleeping
[11954.559834] CPU1 is up
[11954.559852] smpboot: Booting Node 0 Processor 2 APIC 0x1
[11954.560362]  cache: parent cpu2 should not be sleeping
[11954.560506] CPU2 is up
[11954.560524] smpboot: Booting Node 0 Processor 3 APIC 0x3
[11954.561002]  cache: parent cpu3 should not be sleeping
[11954.561150] CPU3 is up
[11954.564847] ACPI: Waking up from system sleep state S3
[11954.575401] ACPI: EC: interrupt unblocked
[11954.609927] ACPI: EC: event unblocked
[11954.610207] usb usb1: root hub lost power or was reset
[11954.610210] usb usb2: root hub lost power or was reset
[11954.610752] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[11954.612822] sd 1:0:0:0: [sdb] Starting disk
[11954.612824] sd 0:0:0:0: [sda] Starting disk
[11954.614448] rtc_cmos 00:01: Alarms can be up to one month in the future
[11954.927654] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[11954.928950] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[11954.928955] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[11954.928959] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[11954.930844] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[11954.930849] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[11954.930853] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[11954.931200] ata2.00: configured for UDMA/100
[11954.931211] ahci 0000:00:17.0: port does not support device sleep
[11954.960504] usb 1-6: reset high-speed USB device number 2 using xhci_hcd
[11955.223744] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[11955.366701] acpi LNXPOWER:13: Turning OFF
[11955.366879] acpi LNXPOWER:12: Turning OFF
[11955.367099] acpi LNXPOWER:11: Turning OFF
[11955.367273] acpi LNXPOWER:10: Turning OFF
[11955.367443] acpi LNXPOWER:0f: Turning OFF
[11955.367612] acpi LNXPOWER:0e: Turning OFF
[11955.367781] acpi LNXPOWER:0d: Turning OFF
[11955.367952] acpi LNXPOWER:0c: Turning OFF
[11955.368122] acpi LNXPOWER:0b: Turning OFF
[11955.368291] acpi LNXPOWER:0a: Turning OFF
[11955.368461] acpi LNXPOWER:09: Turning OFF
[11955.368630] acpi LNXPOWER:08: Turning OFF
[11955.368799] acpi LNXPOWER:07: Turning OFF
[11955.368969] acpi LNXPOWER:06: Turning OFF
[11955.369139] acpi LNXPOWER:05: Turning OFF
[11955.369309] acpi LNXPOWER:04: Turning OFF
[11955.369480] acpi LNXPOWER:03: Turning OFF
[11955.369650] acpi LNXPOWER:02: Turning OFF
[11955.369819] acpi LNXPOWER:01: Turning OFF
[11955.369989] acpi LNXPOWER:00: Turning OFF
[11955.371462] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[11955.372436] Bluetooth: hci0: Device revision is 16
[11955.372438] Bluetooth: hci0: Secure boot is enabled
[11955.372439] Bluetooth: hci0: OTP lock is enabled
[11955.372441] Bluetooth: hci0: API lock is enabled
[11955.372442] Bluetooth: hci0: Debug lock is disabled
[11955.372444] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[11955.382019] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[11955.400766] PM: Basic memory bitmaps freed
[11955.400768] OOM killer enabled.
[11955.400768] Restarting tasks ... done.
[11955.420585] PM: hibernation exit
[11956.992548] Bluetooth: hci0: Waiting for firmware download to complete
[11956.993538] Bluetooth: hci0: Firmware loaded in 1585202 usecs
[11956.993605] Bluetooth: hci0: Waiting for device to boot
[11957.005415] Bluetooth: hci0: Device booted in 11544 usecs
[11957.011122] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[11957.014595] Bluetooth: hci0: Applying Intel DDC parameters completed
[11957.140345] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[11957.152931] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[11957.152939] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[11957.152945] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[11957.214519] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[11957.214527] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[11957.214533] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[11957.251482] ata1.00: configured for UDMA/133
[11958.904534] wlp2s0: authenticate with 30:91:8f:a8:b9:37
[11958.914018] wlp2s0: send auth to 30:91:8f:a8:b9:37 (try 1/3)
[11958.921619] wlp2s0: authenticated
[11958.924096] wlp2s0: associate with 30:91:8f:a8:b9:37 (try 1/3)
[11958.928132] wlp2s0: RX AssocResp from 30:91:8f:a8:b9:37 (capab=0x411 status=0 aid=4)
[11958.935572] wlp2s0: associated
[15837.755733] PM: hibernation entry
[15837.765917] PM: Syncing filesystems ... 
[15837.801203] PM: done.
[15837.801211] Freezing user space processes ... (elapsed 0.002 seconds) done.
[15837.803233] OOM killer disabled.
[15837.803288] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[15837.803289] PM: Marking nosave pages: [mem 0x0009c000-0x000fffff]
[15837.803291] PM: Marking nosave pages: [mem 0x93bde000-0x93bdffff]
[15837.803292] PM: Marking nosave pages: [mem 0x99b2a000-0x9b37efff]
[15837.803366] PM: Marking nosave pages: [mem 0x9b3ff000-0xffffffff]
[15837.804131] PM: Basic memory bitmaps created
[15837.804131] PM: Preallocating image memory... done (allocated 804033 pages)
[15840.361628] PM: Allocated 3216132 kbytes in 2.55 seconds (1261.22 MB/s)
[15840.361628] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[15840.577231] Suspending console(s) (use no_console_suspend to debug)
[15840.577464] wlp2s0: deauthenticating from 30:91:8f:a8:b9:37 by local choice (Reason: 3=DEAUTH_LEAVING)
[15840.983149] ACPI: EC: interrupt blocked
[15840.996789] Disabling non-boot CPUs ...
[15841.041432] smpboot: CPU 1 is now offline
[15841.095664] smpboot: CPU 2 is now offline
[15841.127987] smpboot: CPU 3 is now offline
[15841.130411] PM: Creating hibernation image:
[15841.198819] PM: Need to copy 789325 pages
[15841.198821] PM: Normal pages needed: 789325 + 1024, available pages: 1277775
[15841.988010] PM: Hibernation image created (789325 pages copied)
[15841.131918] Enabling non-boot CPUs ...
[15841.131954] x86: Booting SMP configuration:
[15841.131955] smpboot: Booting Node 0 Processor 1 APIC 0x2
[15841.132388]  cache: parent cpu1 should not be sleeping
[15841.132503] CPU1 is up
[15841.132529] smpboot: Booting Node 0 Processor 2 APIC 0x1
[15841.132971]  cache: parent cpu2 should not be sleeping
[15841.133091] CPU2 is up
[15841.133110] smpboot: Booting Node 0 Processor 3 APIC 0x3
[15841.133508]  cache: parent cpu3 should not be sleeping
[15841.133633] CPU3 is up
[15841.136739] ACPI: EC: interrupt unblocked
[15841.157901] rtc_cmos 00:01: Alarms can be up to one month in the future
[15841.476685] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[15841.476721] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[15841.478449] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[15841.478456] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[15841.478462] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[15841.482272] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[15841.482279] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[15841.482284] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[15841.482673] ata2.00: configured for UDMA/100
[15841.482688] ahci 0000:00:17.0: port does not support device sleep
[15841.490911] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[15841.490918] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[15841.490923] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[15841.900064] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[15841.900074] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[15841.900081] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[15841.937670] ata1.00: configured for UDMA/133
[15841.954026] PM: Using 3 thread(s) for compression
[15841.954030] PM: Compressing and saving image data (790867 pages)...
[15841.954078] PM: Image saving progress:   0%
[15842.345316] PM: Image saving progress:  10%
[15843.010516] PM: Image saving progress:  20%
[15843.761420] PM: Image saving progress:  30%
[15844.508013] PM: Image saving progress:  40%
[15844.988095] PM: Image saving progress:  50%
[15845.751129] PM: Image saving progress:  60%
[15846.471239] PM: Image saving progress:  70%
[15847.037965] PM: Image saving progress:  80%
[15847.784780] PM: Image saving progress:  90%
[15848.231686] PM: Image saving progress: 100%
[15848.652451] PM: Image saving done
[15848.652461] PM: Wrote 3163468 kbytes in 6.69 seconds (472.86 MB/s)
[15848.653102] PM: S|
[15848.762378] Suspending console(s) (use no_console_suspend to debug)
[15848.779538] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[15848.780756] sd 0:0:0:0: [sda] Stopping disk
[15848.791258] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[15848.827590] sd 1:0:0:0: [sdb] Stopping disk
[15849.617231] ACPI: EC: interrupt blocked
[15849.656994] ACPI: Preparing to enter system sleep state S3
[15849.660380] ACPI: EC: event blocked
[15849.660382] ACPI: EC: EC stopped
[15849.660383] PM: Saving platform NVS memory
[15849.660449] Disabling non-boot CPUs ...
[15849.710855] smpboot: CPU 1 is now offline
[15849.755093] smpboot: CPU 2 is now offline
[15849.784047] smpboot: CPU 3 is now offline
[15849.787665] ACPI: Low-level resume complete
[15849.787750] ACPI: EC: EC started
[15849.787750] PM: Restoring platform NVS memory
[15849.788572] Enabling non-boot CPUs ...
[15849.788601] x86: Booting SMP configuration:
[15849.788602] smpboot: Booting Node 0 Processor 1 APIC 0x2
[15849.789116]  cache: parent cpu1 should not be sleeping
[15849.789272] CPU1 is up
[15849.789289] smpboot: Booting Node 0 Processor 2 APIC 0x1
[15849.789813]  cache: parent cpu2 should not be sleeping
[15849.789969] CPU2 is up
[15849.789989] smpboot: Booting Node 0 Processor 3 APIC 0x3
[15849.790466]  cache: parent cpu3 should not be sleeping
[15849.790617] CPU3 is up
[15849.794284] ACPI: Waking up from system sleep state S3
[15849.804324] ACPI: EC: interrupt unblocked
[15849.839695] usb usb1: root hub lost power or was reset
[15849.839698] usb usb2: root hub lost power or was reset
[15849.840295] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[15849.840486] ACPI: EC: event unblocked
[15849.840729] sd 0:0:0:0: [sda] Starting disk
[15849.840756] sd 1:0:0:0: [sdb] Starting disk
[15849.844290] rtc_cmos 00:01: Alarms can be up to one month in the future
[15850.154219] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[15850.155523] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[15850.155528] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[15850.155532] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[15850.157514] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[15850.157519] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[15850.157522] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[15850.157871] ata2.00: configured for UDMA/100
[15850.157878] ahci 0000:00:17.0: port does not support device sleep
[15850.190040] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[15850.453337] usb 1-6: reset high-speed USB device number 2 using xhci_hcd
[15850.615910] acpi LNXPOWER:13: Turning OFF
[15850.616087] acpi LNXPOWER:12: Turning OFF
[15850.616258] acpi LNXPOWER:11: Turning OFF
[15850.616429] acpi LNXPOWER:10: Turning OFF
[15850.616633] acpi LNXPOWER:0f: Turning OFF
[15850.616804] acpi LNXPOWER:0e: Turning OFF
[15850.616973] acpi LNXPOWER:0d: Turning OFF
[15850.617143] acpi LNXPOWER:0c: Turning OFF
[15850.617312] acpi LNXPOWER:0b: Turning OFF
[15850.617480] acpi LNXPOWER:0a: Turning OFF
[15850.617650] acpi LNXPOWER:09: Turning OFF
[15850.617819] acpi LNXPOWER:08: Turning OFF
[15850.617987] acpi LNXPOWER:07: Turning OFF
[15850.618156] acpi LNXPOWER:06: Turning OFF
[15850.618324] acpi LNXPOWER:05: Turning OFF
[15850.618493] acpi LNXPOWER:04: Turning OFF
[15850.618663] acpi LNXPOWER:03: Turning OFF
[15850.618832] acpi LNXPOWER:02: Turning OFF
[15850.618999] acpi LNXPOWER:01: Turning OFF
[15850.619168] acpi LNXPOWER:00: Turning OFF
[15850.620812] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[15850.621824] Bluetooth: hci0: Device revision is 16
[15850.621826] Bluetooth: hci0: Secure boot is enabled
[15850.621828] Bluetooth: hci0: OTP lock is enabled
[15850.621829] Bluetooth: hci0: API lock is enabled
[15850.621831] Bluetooth: hci0: Debug lock is disabled
[15850.621833] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[15850.621838] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[15850.649866] PM: Basic memory bitmaps freed
[15850.649868] OOM killer enabled.
[15850.649868] Restarting tasks ... done.
[15850.661917] PM: hibernation exit
[15852.098460] Bluetooth: hci0: Waiting for firmware download to complete
[15852.098664] Bluetooth: hci0: Firmware loaded in 1444494 usecs
[15852.098730] Bluetooth: hci0: Waiting for device to boot
[15852.111005] Bluetooth: hci0: Device booted in 12048 usecs
[15852.111010] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[15852.113921] Bluetooth: hci0: Applying Intel DDC parameters completed
[15852.379977] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[15852.392296] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[15852.392307] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[15852.392314] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[15852.454457] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[15852.454462] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[15852.454466] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[15852.491489] ata1.00: configured for UDMA/133
[15923.973506] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[15927.487020] wlp2s0: authenticate with 2c:b0:5d:3d:4c:da
[15927.494332] wlp2s0: send auth to 2c:b0:5d:3d:4c:da (try 1/3)
[15927.501966] wlp2s0: authenticated
[15927.503310] wlp2s0: associate with 2c:b0:5d:3d:4c:da (try 1/3)
[15927.507027] wlp2s0: RX AssocResp from 2c:b0:5d:3d:4c:da (capab=0x411 status=0 aid=15)
[15927.509504] wlp2s0: associated
[15927.549722] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[16814.816584] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[16814.824521] Bridge firewalling registered
[16815.057701] Initializing XFRM netlink socket
[16815.121334] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[16825.632526] docker0: port 1(veth564df27) entered blocking state
[16825.632562] docker0: port 1(veth564df27) entered disabled state
[16825.632730] device veth564df27 entered promiscuous mode
[16825.632959] IPv6: ADDRCONF(NETDEV_UP): veth564df27: link is not ready
[16826.007473] eth0: renamed from vethff14daa
[16826.023874] IPv6: ADDRCONF(NETDEV_CHANGE): veth564df27: link becomes ready
[16826.023946] docker0: port 1(veth564df27) entered blocking state
[16826.023949] docker0: port 1(veth564df27) entered forwarding state
[16826.024025] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[17035.300908] wlp2s0: deauthenticating from 2c:b0:5d:3d:4c:da by local choice (Reason: 3=DEAUTH_LEAVING)
[17035.757677] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[17039.281250] wlp2s0: authenticate with 2c:b0:5d:3d:4c:da
[17039.295305] wlp2s0: send auth to 2c:b0:5d:3d:4c:da (try 1/3)
[17039.304908] wlp2s0: authenticated
[17039.306798] wlp2s0: associate with 2c:b0:5d:3d:4c:da (try 1/3)
[17039.456895] wlp2s0: RX AssocResp from 2c:b0:5d:3d:4c:da (capab=0x411 status=0 aid=15)
[17039.466913] wlp2s0: associated
[17040.609644] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[17070.867166] wlp2s0: deauthenticating from 2c:b0:5d:3d:4c:da by local choice (Reason: 3=DEAUTH_LEAVING)
[17092.284777] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[17095.797140] wlp2s0: authenticate with 2c:b0:5d:3d:4c:da
[17095.811988] wlp2s0: send auth to 2c:b0:5d:3d:4c:da (try 1/3)
[17096.138526] wlp2s0: send auth to 2c:b0:5d:3d:4c:da (try 2/3)
[17096.300825] wlp2s0: send auth to 2c:b0:5d:3d:4c:da (try 3/3)
[17096.543450] wlp2s0: authentication with 2c:b0:5d:3d:4c:da timed out
[17104.367655] wlp2s0: authenticate with 2c:b0:5d:3d:4c:da
[17104.385729] wlp2s0: send auth to 2c:b0:5d:3d:4c:da (try 1/3)
[17104.503880] wlp2s0: authenticated
[17104.506745] wlp2s0: associate with 2c:b0:5d:3d:4c:da (try 1/3)
[17104.690890] wlp2s0: associate with 2c:b0:5d:3d:4c:da (try 2/3)
[17105.084272] wlp2s0: associate with 2c:b0:5d:3d:4c:da (try 3/3)
[17105.239558] wlp2s0: association with 2c:b0:5d:3d:4c:da timed out
[17131.587715] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[17135.100275] wlp2s0: authenticate with 2c:b0:5d:3d:4c:da
[17135.114769] wlp2s0: send auth to 2c:b0:5d:3d:4c:da (try 1/3)
[17135.133670] wlp2s0: authenticated
[17135.136788] wlp2s0: associate with 2c:b0:5d:3d:4c:da (try 1/3)
[17135.331494] wlp2s0: associate with 2c:b0:5d:3d:4c:da (try 2/3)
[17135.341578] wlp2s0: RX AssocResp from 2c:b0:5d:3d:4c:da (capab=0x411 status=0 aid=15)
[17135.355883] wlp2s0: associated
[17135.452126] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[17143.684750] wlp2s0: deauthenticated from 2c:b0:5d:3d:4c:da (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[17145.582733] wlp2s0: authenticate with 2c:b0:5d:3d:4c:da
[17145.590473] wlp2s0: send auth to 2c:b0:5d:3d:4c:da (try 1/3)
[17145.602978] wlp2s0: authenticated
[17145.603817] wlp2s0: associate with 2c:b0:5d:3d:4c:da (try 1/3)
[17145.617388] wlp2s0: RX AssocResp from 2c:b0:5d:3d:4c:da (capab=0x411 status=0 aid=15)
[17145.657592] wlp2s0: associated
[17154.762846] wlp2s0: deauthenticated from 2c:b0:5d:3d:4c:da (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[17156.235430] wlp2s0: authenticate with 2c:b0:5d:3d:4c:da
[17156.247273] wlp2s0: send auth to 2c:b0:5d:3d:4c:da (try 1/3)
[17156.411094] wlp2s0: authenticated
[17156.413496] wlp2s0: associate with 2c:b0:5d:3d:4c:da (try 1/3)
[17156.631318] wlp2s0: RX AssocResp from 2c:b0:5d:3d:4c:da (capab=0x411 status=0 aid=15)
[17156.648840] wlp2s0: associated
[17257.460369] wlp2s0: deauthenticating from 2c:b0:5d:3d:4c:da by local choice (Reason: 3=DEAUTH_LEAVING)
[17257.927238] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[17261.444374] wlp2s0: authenticate with 2c:b0:5d:3d:4c:da
[17261.454329] wlp2s0: send auth to 2c:b0:5d:3d:4c:da (try 1/3)
[17261.727255] wlp2s0: send auth to 2c:b0:5d:3d:4c:da (try 2/3)
[17261.736906] wlp2s0: authenticated
[17261.740555] wlp2s0: associate with 2c:b0:5d:3d:4c:da (try 1/3)
[17261.816086] wlp2s0: RX AssocResp from 2c:b0:5d:3d:4c:da (capab=0x411 status=0 aid=15)
[17261.830624] wlp2s0: associated
[17261.984723] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[19461.192875] asus_wmi: Unknown key cf pressed
[28219.741616] asus_wmi: Unknown key cf pressed
[41173.177986] PM: hibernation entry
[41173.192955] PM: Syncing filesystems ... 
[41173.233667] PM: done.
[41173.233671] Freezing user space processes ... (elapsed 0.002 seconds) done.
[41173.236134] OOM killer disabled.
[41173.236266] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[41173.236268] PM: Marking nosave pages: [mem 0x0009c000-0x000fffff]
[41173.236273] PM: Marking nosave pages: [mem 0x93bde000-0x93bdffff]
[41173.236275] PM: Marking nosave pages: [mem 0x99b2a000-0x9b37efff]
[41173.236455] PM: Marking nosave pages: [mem 0x9b3ff000-0xffffffff]
[41173.238522] PM: Basic memory bitmaps created
[41173.238524] PM: Preallocating image memory... done (allocated 812265 pages)
[41190.792439] PM: Allocated 3249060 kbytes in 17.55 seconds (185.13 MB/s)
[41190.792440] Freezing remaining freezable tasks ... (elapsed 0.118 seconds) done.
[41191.123851] Suspending console(s) (use no_console_suspend to debug)
[41191.124063] wlp2s0: deauthenticating from 2c:b0:5d:3d:4c:da by local choice (Reason: 3=DEAUTH_LEAVING)
[41191.667680] ACPI: EC: interrupt blocked
[41191.680312] Disabling non-boot CPUs ...
[41191.732732] smpboot: CPU 1 is now offline
[41191.798312] smpboot: CPU 2 is now offline
[41191.838259] smpboot: CPU 3 is now offline
[41191.841407] PM: Creating hibernation image:
[41191.914489] PM: Need to copy 803604 pages
[41191.914492] PM: Normal pages needed: 803604 + 1024, available pages: 1263497
[41192.723077] PM: Hibernation image created (803604 pages copied)
[41191.842913] Enabling non-boot CPUs ...
[41191.842962] x86: Booting SMP configuration:
[41191.842962] smpboot: Booting Node 0 Processor 1 APIC 0x2
[41191.843400]  cache: parent cpu1 should not be sleeping
[41191.843516] CPU1 is up
[41191.843531] smpboot: Booting Node 0 Processor 2 APIC 0x1
[41191.843962]  cache: parent cpu2 should not be sleeping
[41191.844085] CPU2 is up
[41191.844103] smpboot: Booting Node 0 Processor 3 APIC 0x3
[41191.844503]  cache: parent cpu3 should not be sleeping
[41191.844632] CPU3 is up
[41191.847750] ACPI: EC: interrupt unblocked
[41191.873120] rtc_cmos 00:01: Alarms can be up to one month in the future
[41192.190262] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[41192.204420] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[41192.204426] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[41192.204432] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[41192.246097] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[41192.247926] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[41192.247933] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[41192.247938] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[41192.250543] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[41192.250550] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[41192.250555] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[41192.251282] ata2.00: configured for UDMA/100
[41192.251298] ahci 0000:00:17.0: port does not support device sleep
[41192.625960] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[41192.625970] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[41192.625977] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[41192.663783] ata1.00: configured for UDMA/133
[41192.680720] PM: Using 3 thread(s) for compression
[41192.680725] PM: Compressing and saving image data (805174 pages)...
[41192.680749] PM: Image saving progress:   0%
[41193.073349] PM: Image saving progress:  10%
[41194.061183] PM: Image saving progress:  20%
[41194.738909] PM: Image saving progress:  30%
[41195.595417] PM: Image saving progress:  40%
[41196.514979] PM: Image saving progress:  50%
[41197.115813] PM: Image saving progress:  60%
[41198.080148] PM: Image saving progress:  70%
[41198.582272] PM: Image saving progress:  80%
[41199.583133] PM: Image saving progress:  90%
[41199.882808] PM: Image saving progress: 100%
[41200.262087] PM: Image saving done
[41200.262097] PM: Wrote 3220696 kbytes in 7.58 seconds (424.89 MB/s)
[41200.262770] PM: S|
[41200.370738] Suspending console(s) (use no_console_suspend to debug)
[41200.389853] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[41200.389950] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[41200.390923] sd 0:0:0:0: [sda] Stopping disk
[41200.577642] sd 1:0:0:0: [sdb] Stopping disk
[41201.234770] ACPI: EC: interrupt blocked
[41201.270406] ACPI: Preparing to enter system sleep state S3
[41201.273430] ACPI: EC: event blocked
[41201.273431] ACPI: EC: EC stopped
[41201.273432] PM: Saving platform NVS memory
[41201.273499] Disabling non-boot CPUs ...
[41201.321027] smpboot: CPU 1 is now offline
[41201.355240] smpboot: CPU 2 is now offline
[41201.404214] smpboot: CPU 3 is now offline
[41201.407931] ACPI: Low-level resume complete
[41201.408015] ACPI: EC: EC started
[41201.408015] PM: Restoring platform NVS memory
[41201.408894] Enabling non-boot CPUs ...
[41201.408922] x86: Booting SMP configuration:
[41201.408923] smpboot: Booting Node 0 Processor 1 APIC 0x2
[41201.409443]  cache: parent cpu1 should not be sleeping
[41201.409603] CPU1 is up
[41201.409621] smpboot: Booting Node 0 Processor 2 APIC 0x1
[41201.410147]  cache: parent cpu2 should not be sleeping
[41201.410295] CPU2 is up
[41201.410315] smpboot: Booting Node 0 Processor 3 APIC 0x3
[41201.410797]  cache: parent cpu3 should not be sleeping
[41201.410949] CPU3 is up
[41201.414647] ACPI: Waking up from system sleep state S3
[41201.423773] ACPI: EC: interrupt unblocked
[41201.459575] ACPI: EC: event unblocked
[41201.460313] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[41201.460725] sd 1:0:0:0: [sdb] Starting disk
[41201.460727] sd 0:0:0:0: [sda] Starting disk
[41201.461313] usb usb1: root hub lost power or was reset
[41201.461315] usb usb2: root hub lost power or was reset
[41201.463739] rtc_cmos 00:01: Alarms can be up to one month in the future
[41201.774256] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[41201.775546] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[41201.775550] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[41201.775554] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[41201.777455] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[41201.777460] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[41201.777463] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[41201.777822] ata2.00: configured for UDMA/100
[41201.777829] ahci 0000:00:17.0: port does not support device sleep
[41201.810257] usb 1-6: reset high-speed USB device number 2 using xhci_hcd
[41202.073601] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[41202.217148] acpi LNXPOWER:13: Turning OFF
[41202.217324] acpi LNXPOWER:12: Turning OFF
[41202.217494] acpi LNXPOWER:11: Turning OFF
[41202.217665] acpi LNXPOWER:10: Turning OFF
[41202.217833] acpi LNXPOWER:0f: Turning OFF
[41202.218000] acpi LNXPOWER:0e: Turning OFF
[41202.218168] acpi LNXPOWER:0d: Turning OFF
[41202.218338] acpi LNXPOWER:0c: Turning OFF
[41202.218505] acpi LNXPOWER:0b: Turning OFF
[41202.218673] acpi LNXPOWER:0a: Turning OFF
[41202.218841] acpi LNXPOWER:09: Turning OFF
[41202.219009] acpi LNXPOWER:08: Turning OFF
[41202.219177] acpi LNXPOWER:07: Turning OFF
[41202.219344] acpi LNXPOWER:06: Turning OFF
[41202.219511] acpi LNXPOWER:05: Turning OFF
[41202.219678] acpi LNXPOWER:04: Turning OFF
[41202.219847] acpi LNXPOWER:03: Turning OFF
[41202.220015] acpi LNXPOWER:02: Turning OFF
[41202.220211] acpi LNXPOWER:01: Turning OFF
[41202.220380] acpi LNXPOWER:00: Turning OFF
[41202.221940] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[41202.222886] Bluetooth: hci0: Device revision is 16
[41202.222888] Bluetooth: hci0: Secure boot is enabled
[41202.222889] Bluetooth: hci0: OTP lock is enabled
[41202.222891] Bluetooth: hci0: API lock is enabled
[41202.222892] Bluetooth: hci0: Debug lock is disabled
[41202.222894] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[41202.236784] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[41202.277705] PM: Basic memory bitmaps freed
[41202.277708] OOM killer enabled.
[41202.277708] Restarting tasks ... done.
[41202.289682] PM: hibernation exit
[41203.650925] Bluetooth: hci0: Waiting for firmware download to complete
[41203.651790] Bluetooth: hci0: Firmware loaded in 1397531 usecs
[41203.651844] Bluetooth: hci0: Waiting for device to boot
[41203.663796] Bluetooth: hci0: Device booted in 11690 usecs
[41203.664064] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[41203.666941] Bluetooth: hci0: Applying Intel DDC parameters completed
[41204.016778] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[41204.217869] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[41204.217880] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[41204.217887] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[41204.279332] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[41204.279400] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[41204.279407] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[41204.316755] ata1.00: configured for UDMA/133
[41246.479732] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[41249.991303] wlp2s0: authenticate with 30:91:8f:a8:b9:37
[41250.003661] wlp2s0: send auth to 30:91:8f:a8:b9:37 (try 1/3)
[41250.012984] wlp2s0: authenticated
[41250.017018] wlp2s0: associate with 30:91:8f:a8:b9:37 (try 1/3)
[41250.021048] wlp2s0: RX AssocResp from 30:91:8f:a8:b9:37 (capab=0x411 status=0 aid=3)
[41250.028832] wlp2s0: associated
[41250.075025] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[43583.080745] asus_wmi: Unknown key cf pressed
[57050.212653] asus_wmi: Unknown key cf pressed
[62673.949274] PM: hibernation entry
[62673.966710] PM: Syncing filesystems ... 
[62674.038937] PM: done.
[62674.038941] Freezing user space processes ... (elapsed 0.002 seconds) done.
[62674.041467] OOM killer disabled.
[62674.041624] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[62674.041628] PM: Marking nosave pages: [mem 0x0009c000-0x000fffff]
[62674.041636] PM: Marking nosave pages: [mem 0x93bde000-0x93bdffff]
[62674.041638] PM: Marking nosave pages: [mem 0x99b2a000-0x9b37efff]
[62674.041946] PM: Marking nosave pages: [mem 0x9b3ff000-0xffffffff]
[62674.045015] PM: Basic memory bitmaps created
[62674.045016] PM: Preallocating image memory... done (allocated 811581 pages)
[62681.153194] PM: Allocated 3246324 kbytes in 7.10 seconds (457.22 MB/s)
[62681.153195] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[62681.366000] Suspending console(s) (use no_console_suspend to debug)
[62681.366203] wlp2s0: deauthenticating from 30:91:8f:a8:b9:37 by local choice (Reason: 3=DEAUTH_LEAVING)
[62681.941178] ACPI: EC: interrupt blocked
[62681.955560] Disabling non-boot CPUs ...
[62681.986975] smpboot: CPU 1 is now offline
[62682.027951] smpboot: CPU 2 is now offline
[62682.080152] smpboot: CPU 3 is now offline
[62682.083122] PM: Creating hibernation image:
[62682.156926] PM: Need to copy 806016 pages
[62682.156928] PM: Normal pages needed: 806016 + 1024, available pages: 1261087
[62682.968935] PM: Hibernation image created (806016 pages copied)
[62682.084662] Enabling non-boot CPUs ...
[62682.084689] x86: Booting SMP configuration:
[62682.084690] smpboot: Booting Node 0 Processor 1 APIC 0x2
[62682.085127]  cache: parent cpu1 should not be sleeping
[62682.085246] CPU1 is up
[62682.085263] smpboot: Booting Node 0 Processor 2 APIC 0x1
[62682.085703]  cache: parent cpu2 should not be sleeping
[62682.085833] CPU2 is up
[62682.085852] smpboot: Booting Node 0 Processor 3 APIC 0x3
[62682.086252]  cache: parent cpu3 should not be sleeping
[62682.086387] CPU3 is up
[62682.089503] ACPI: EC: interrupt unblocked
[62682.113680] rtc_cmos 00:01: Alarms can be up to one month in the future
[62682.432191] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[62682.432227] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[62682.433952] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[62682.433959] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[62682.433964] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[62682.437742] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[62682.437749] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[62682.437754] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[62682.438158] ata2.00: configured for UDMA/100
[62682.438173] ahci 0000:00:17.0: port does not support device sleep
[62682.446419] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[62682.446425] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[62682.446431] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[62682.852140] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[62682.852150] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[62682.852156] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[62682.889885] ata1.00: configured for UDMA/133
[62682.906525] PM: Using 3 thread(s) for compression
[62682.906529] PM: Compressing and saving image data (807591 pages)...
[62682.906552] PM: Image saving progress:   0%
[62683.583824] PM: Image saving progress:  10%
[62684.677513] PM: Image saving progress:  20%
[62685.466328] PM: Image saving progress:  30%
[62686.446513] PM: Image saving progress:  40%
[62687.327404] PM: Image saving progress:  50%
[62688.192612] PM: Image saving progress:  60%
[62689.256685] PM: Image saving progress:  70%
[62690.065980] PM: Image saving progress:  80%
[62690.823652] PM: Image saving progress:  90%
[62691.347474] PM: Image saving progress: 100%
[62691.809128] PM: Image saving done
[62691.809140] PM: Wrote 3230364 kbytes in 8.90 seconds (362.96 MB/s)
[62691.809935] PM: S|
[62691.916810] Suspending console(s) (use no_console_suspend to debug)
[62691.941530] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[62691.954754] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[62692.026225] sd 1:0:0:0: [sdb] Stopping disk
[62692.343594] sd 0:0:0:0: [sda] Stopping disk
[62693.287441] ACPI: EC: interrupt blocked
[62693.325630] ACPI: Preparing to enter system sleep state S3
[62693.328775] ACPI: EC: event blocked
[62693.328776] ACPI: EC: EC stopped
[62693.328778] PM: Saving platform NVS memory
[62693.328844] Disabling non-boot CPUs ...
[62693.376171] smpboot: CPU 1 is now offline
[62693.419500] smpboot: CPU 2 is now offline
[62693.459412] smpboot: CPU 3 is now offline
[62693.463264] ACPI: Low-level resume complete
[62693.463349] ACPI: EC: EC started
[62693.463349] PM: Restoring platform NVS memory
[62693.464233] Enabling non-boot CPUs ...
[62693.464262] x86: Booting SMP configuration:
[62693.464262] smpboot: Booting Node 0 Processor 1 APIC 0x2
[62693.464775]  cache: parent cpu1 should not be sleeping
[62693.464940] CPU1 is up
[62693.464956] smpboot: Booting Node 0 Processor 2 APIC 0x1
[62693.465487]  cache: parent cpu2 should not be sleeping
[62693.465642] CPU2 is up
[62693.465663] smpboot: Booting Node 0 Processor 3 APIC 0x3
[62693.466146]  cache: parent cpu3 should not be sleeping
[62693.466312] CPU3 is up
[62693.469980] ACPI: Waking up from system sleep state S3
[62693.480561] ACPI: EC: interrupt unblocked
[62693.514448] ACPI: EC: event unblocked
[62693.514952] usb usb1: root hub lost power or was reset
[62693.514955] usb usb2: root hub lost power or was reset
[62693.515544] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[62693.516087] sd 0:0:0:0: [sda] Starting disk
[62693.516090] sd 1:0:0:0: [sdb] Starting disk
[62693.518354] rtc_cmos 00:01: Alarms can be up to one month in the future
[62693.829063] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[62693.830433] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[62693.830438] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[62693.830442] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[62693.832648] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[62693.832652] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[62693.832656] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[62693.833181] ata2.00: configured for UDMA/100
[62693.833192] ahci 0000:00:17.0: port does not support device sleep
[62693.865375] usb 1-6: reset high-speed USB device number 2 using xhci_hcd
[62694.128743] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[62694.272249] acpi LNXPOWER:13: Turning OFF
[62694.272427] acpi LNXPOWER:12: Turning OFF
[62694.272600] acpi LNXPOWER:11: Turning OFF
[62694.272772] acpi LNXPOWER:10: Turning OFF
[62694.272942] acpi LNXPOWER:0f: Turning OFF
[62694.273112] acpi LNXPOWER:0e: Turning OFF
[62694.273282] acpi LNXPOWER:0d: Turning OFF
[62694.273453] acpi LNXPOWER:0c: Turning OFF
[62694.273624] acpi LNXPOWER:0b: Turning OFF
[62694.273794] acpi LNXPOWER:0a: Turning OFF
[62694.273965] acpi LNXPOWER:09: Turning OFF
[62694.274136] acpi LNXPOWER:08: Turning OFF
[62694.274305] acpi LNXPOWER:07: Turning OFF
[62694.274476] acpi LNXPOWER:06: Turning OFF
[62694.274646] acpi LNXPOWER:05: Turning OFF
[62694.274816] acpi LNXPOWER:04: Turning OFF
[62694.274987] acpi LNXPOWER:03: Turning OFF
[62694.275158] acpi LNXPOWER:02: Turning OFF
[62694.275348] acpi LNXPOWER:01: Turning OFF
[62694.275519] acpi LNXPOWER:00: Turning OFF
[62694.276706] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[62694.277706] Bluetooth: hci0: Device revision is 16
[62694.277708] Bluetooth: hci0: Secure boot is enabled
[62694.277710] Bluetooth: hci0: OTP lock is enabled
[62694.277711] Bluetooth: hci0: API lock is enabled
[62694.277712] Bluetooth: hci0: Debug lock is disabled
[62694.277714] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[62694.277719] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[62694.313358] PM: Basic memory bitmaps freed
[62694.313360] OOM killer enabled.
[62694.313361] Restarting tasks ... done.
[62694.324457] PM: hibernation exit
[62695.682786] Bluetooth: hci0: Waiting for firmware download to complete
[62695.683631] Bluetooth: hci0: Firmware loaded in 1374820 usecs
[62695.683669] Bluetooth: hci0: Waiting for device to boot
[62695.695633] Bluetooth: hci0: Device booted in 11714 usecs
[62695.695640] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[62695.698642] Bluetooth: hci0: Applying Intel DDC parameters completed
[62696.678503] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[62696.689332] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[62696.689336] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[62696.689339] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[62696.750446] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[62696.750454] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[62696.750460] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[62696.787249] ata1.00: configured for UDMA/133
[62698.835515] wlp2s0: authenticate with 30:91:8f:a8:b9:37
[62698.843404] wlp2s0: send auth to 30:91:8f:a8:b9:37 (try 1/3)
[62698.849918] wlp2s0: authenticated
[62698.851813] wlp2s0: associate with 30:91:8f:a8:b9:37 (try 1/3)
[62698.855460] wlp2s0: RX AssocResp from 30:91:8f:a8:b9:37 (capab=0x411 status=0 aid=3)
[62698.860312] wlp2s0: associated
[62700.062824] asus_wmi: Unknown key cf pressed
[64107.833441] asus_wmi: Unknown key cf pressed
[64112.764411] asus_wmi: Unknown key cf pressed
[64115.439730] asus_wmi: Unknown key cf pressed
[64122.613506] asus_wmi: Unknown key cf pressed
[64191.321097] asus_wmi: Unknown key cf pressed
[64609.554749] asus_wmi: Unknown key cf pressed
[64620.767632] asus_wmi: Unknown key cf pressed
[65929.845425] asus_wmi: Unknown key cf pressed
[67545.174412] PM: hibernation entry
[67545.183024] PM: Syncing filesystems ... 
[67545.229843] PM: done.
[67545.229850] Freezing user space processes ... (elapsed 0.003 seconds) done.
[67545.233854] OOM killer disabled.
[67545.233915] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[67545.233916] PM: Marking nosave pages: [mem 0x0009c000-0x000fffff]
[67545.233918] PM: Marking nosave pages: [mem 0x93bde000-0x93bdffff]
[67545.233919] PM: Marking nosave pages: [mem 0x99b2a000-0x9b37efff]
[67545.233987] PM: Marking nosave pages: [mem 0x9b3ff000-0xffffffff]
[67545.234779] PM: Basic memory bitmaps created
[67545.234779] PM: Preallocating image memory... 
[67545.595602] asus_wmi: Unknown key cf pressed
[67548.129027] done (allocated 805790 pages)
[67548.129030] PM: Allocated 3223160 kbytes in 2.89 seconds (1115.28 MB/s)
[67548.129030] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[67548.342795] Suspending console(s) (use no_console_suspend to debug)
[67548.343058] wlp2s0: deauthenticating from 30:91:8f:a8:b9:37 by local choice (Reason: 3=DEAUTH_LEAVING)
[67548.745727] ACPI: EC: interrupt blocked
[67548.758970] Disabling non-boot CPUs ...
[67548.800319] smpboot: CPU 1 is now offline
[67548.844583] smpboot: CPU 2 is now offline
[67548.876861] smpboot: CPU 3 is now offline
[67548.879578] PM: Creating hibernation image:
[67548.952761] PM: Need to copy 804857 pages
[67548.952762] PM: Normal pages needed: 804857 + 1024, available pages: 1262252
[67549.762738] PM: Hibernation image created (804857 pages copied)
[67548.881084] Enabling non-boot CPUs ...
[67548.881122] x86: Booting SMP configuration:
[67548.881122] smpboot: Booting Node 0 Processor 1 APIC 0x2
[67548.881559]  cache: parent cpu1 should not be sleeping
[67548.881679] CPU1 is up
[67548.881695] smpboot: Booting Node 0 Processor 2 APIC 0x1
[67548.882130]  cache: parent cpu2 should not be sleeping
[67548.882258] CPU2 is up
[67548.882276] smpboot: Booting Node 0 Processor 3 APIC 0x3
[67548.882678]  cache: parent cpu3 should not be sleeping
[67548.882814] CPU3 is up
[67548.885930] ACPI: EC: interrupt unblocked
[67548.906839] rtc_cmos 00:01: Alarms can be up to one month in the future
[67549.225525] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[67549.225770] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[67549.227590] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[67549.227597] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[67549.227603] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[67549.231709] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[67549.231716] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[67549.231721] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[67549.232464] ata2.00: configured for UDMA/100
[67549.232479] ahci 0000:00:17.0: port does not support device sleep
[67549.239686] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[67549.239693] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[67549.239699] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[67549.641043] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[67549.641053] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[67549.641060] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[67549.678572] ata1.00: configured for UDMA/133
[67549.695413] PM: Using 3 thread(s) for compression
[67549.695418] PM: Compressing and saving image data (806429 pages)...
[67549.695441] PM: Image saving progress:   0%
[67550.386961] PM: Image saving progress:  10%
[67551.296535] PM: Image saving progress:  20%
[67551.849702] PM: Image saving progress:  30%
[67552.364879] PM: Image saving progress:  40%
[67553.570311] PM: Image saving progress:  50%
[67554.214443] PM: Image saving progress:  60%
[67554.997059] PM: Image saving progress:  70%
[67555.812239] PM: Image saving progress:  80%
[67556.611085] PM: Image saving progress:  90%
[67556.999904] PM: Image saving progress: 100%
[67557.504160] PM: Image saving done
[67557.504168] PM: Wrote 3225716 kbytes in 7.80 seconds (413.55 MB/s)
[67557.505034] PM: S|
[67557.614348] Suspending console(s) (use no_console_suspend to debug)
[67557.655277] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[67557.665208] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[67557.666328] sd 0:0:0:0: [sda] Stopping disk
[67557.747220] sd 1:0:0:0: [sdb] Stopping disk
[67558.508002] ACPI: EC: interrupt blocked
[67558.545755] ACPI: Preparing to enter system sleep state S3
[67558.548885] ACPI: EC: event blocked
[67558.548886] ACPI: EC: EC stopped
[67558.548888] PM: Saving platform NVS memory
[67558.548951] Disabling non-boot CPUs ...
[67558.589611] smpboot: CPU 1 is now offline
[67558.633832] smpboot: CPU 2 is now offline
[67558.672823] smpboot: CPU 3 is now offline
[67558.676602] ACPI: Low-level resume complete
[67558.676686] ACPI: EC: EC started
[67558.676686] PM: Restoring platform NVS memory
[67558.677563] Enabling non-boot CPUs ...
[67558.677592] x86: Booting SMP configuration:
[67558.677593] smpboot: Booting Node 0 Processor 1 APIC 0x2
[67558.678107]  cache: parent cpu1 should not be sleeping
[67558.678271] CPU1 is up
[67558.678288] smpboot: Booting Node 0 Processor 2 APIC 0x1
[67558.678822]  cache: parent cpu2 should not be sleeping
[67558.678977] CPU2 is up
[67558.678997] smpboot: Booting Node 0 Processor 3 APIC 0x3
[67558.679476]  cache: parent cpu3 should not be sleeping
[67558.679635] CPU3 is up
[67558.683316] ACPI: Waking up from system sleep state S3
[67558.693574] ACPI: EC: interrupt unblocked
[67558.727852] ACPI: EC: event unblocked
[67558.728910] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[67558.729130] usb usb1: root hub lost power or was reset
[67558.729133] usb usb2: root hub lost power or was reset
[67558.731253] sd 0:0:0:0: [sda] Starting disk
[67558.731259] sd 1:0:0:0: [sdb] Starting disk
[67558.731714] rtc_cmos 00:01: Alarms can be up to one month in the future
[67559.042755] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[67559.044050] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[67559.044054] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[67559.044058] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[67559.045978] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[67559.045982] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[67559.045986] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[67559.046341] ata2.00: configured for UDMA/100
[67559.046348] ahci 0000:00:17.0: port does not support device sleep
[67559.078824] usb 1-6: reset high-speed USB device number 2 using xhci_hcd
[67559.342130] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[67559.485181] acpi LNXPOWER:13: Turning OFF
[67559.485637] acpi LNXPOWER:12: Turning OFF
[67559.485836] acpi LNXPOWER:11: Turning OFF
[67559.486009] acpi LNXPOWER:10: Turning OFF
[67559.486157] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[67559.486216] acpi LNXPOWER:0f: Turning OFF
[67559.486401] acpi LNXPOWER:0e: Turning OFF
[67559.486573] acpi LNXPOWER:0d: Turning OFF
[67559.486744] acpi LNXPOWER:0c: Turning OFF
[67559.486914] acpi LNXPOWER:0b: Turning OFF
[67559.487084] acpi LNXPOWER:0a: Turning OFF
[67559.487156] Bluetooth: hci0: Device revision is 16
[67559.487158] Bluetooth: hci0: Secure boot is enabled
[67559.487160] Bluetooth: hci0: OTP lock is enabled
[67559.487162] Bluetooth: hci0: API lock is enabled
[67559.487164] Bluetooth: hci0: Debug lock is disabled
[67559.487167] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[67559.487306] acpi LNXPOWER:09: Turning OFF
[67559.487480] acpi LNXPOWER:08: Turning OFF
[67559.487651] acpi LNXPOWER:07: Turning OFF
[67559.487822] acpi LNXPOWER:06: Turning OFF
[67559.487992] acpi LNXPOWER:05: Turning OFF
[67559.488161] acpi LNXPOWER:04: Turning OFF
[67559.488334] acpi LNXPOWER:03: Turning OFF
[67559.488504] acpi LNXPOWER:02: Turning OFF
[67559.488703] acpi LNXPOWER:01: Turning OFF
[67559.488874] acpi LNXPOWER:00: Turning OFF
[67559.501216] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[67559.543385] PM: Basic memory bitmaps freed
[67559.543388] OOM killer enabled.
[67559.543388] Restarting tasks ... done.
[67559.555251] PM: hibernation exit
[67560.920888] Bluetooth: hci0: Waiting for firmware download to complete
[67560.921087] Bluetooth: hci0: Firmware loaded in 1401985 usecs
[67560.921132] Bluetooth: hci0: Waiting for device to boot
[67560.933098] Bluetooth: hci0: Device booted in 11696 usecs
[67560.934470] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[67560.937107] Bluetooth: hci0: Applying Intel DDC parameters completed
[67561.335356] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[67561.347628] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[67561.347638] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[67561.347645] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[67561.410932] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[67561.410945] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[67561.410952] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[67561.447818] ata1.00: configured for UDMA/133
[67621.112298] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[67624.627437] wlp2s0: authenticate with 2c:b0:5d:3d:4c:da
[67624.635128] wlp2s0: send auth to 2c:b0:5d:3d:4c:da (try 1/3)
[67624.643748] wlp2s0: authenticated
[67624.644779] wlp2s0: associate with 2c:b0:5d:3d:4c:da (try 1/3)
[67624.648630] wlp2s0: RX AssocResp from 2c:b0:5d:3d:4c:da (capab=0x411 status=0 aid=11)
[67624.655585] wlp2s0: associated
[67624.689895] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[68401.135926] vethff14daa: renamed from eth0
[68401.157292] docker0: port 1(veth564df27) entered disabled state
[68401.176612] docker0: port 1(veth564df27) entered disabled state
[68401.178766] device veth564df27 left promiscuous mode
[68401.178770] docker0: port 1(veth564df27) entered disabled state
[68437.495394] docker0: port 1(vethe29b4e5) entered blocking state
[68437.495397] docker0: port 1(vethe29b4e5) entered disabled state
[68437.495445] device vethe29b4e5 entered promiscuous mode
[68437.495531] IPv6: ADDRCONF(NETDEV_UP): vethe29b4e5: link is not ready
[68437.495545] docker0: port 1(vethe29b4e5) entered blocking state
[68437.495546] docker0: port 1(vethe29b4e5) entered forwarding state
[68437.495855] docker0: port 1(vethe29b4e5) entered disabled state
[68437.813584] eth0: renamed from veth5d05570
[68437.830583] IPv6: ADDRCONF(NETDEV_CHANGE): vethe29b4e5: link becomes ready
[68437.830729] docker0: port 1(vethe29b4e5) entered blocking state
[68437.830735] docker0: port 1(vethe29b4e5) entered forwarding state
[71289.236930] asus_wmi: Unknown key cf pressed
[77728.286975] vboxdrv: loading out-of-tree module taints kernel.
[77728.336024] vboxdrv: Found 4 processor cores
[77728.358859] vboxdrv: TSC mode is Invariant, tentative frequency 2903984550 Hz
[77728.358862] vboxdrv: Successfully loaded version 5.2.14 (interface 0x00290001)
[77952.934277] asus_wmi: Unknown key cf pressed
[79153.084893] SUPR0GipMap: fGetGipCpu=0xb
[79153.770663] vboxdrv: 0000000028df26a5 VMMR0.r0
[79153.983951] vboxdrv: 00000000e9118b6b VBoxDDR0.r0
[80745.931187] asus_wmi: Unknown key cf pressed
[85379.957769] vboxdrv: 0000000028df26a5 VMMR0.r0
[85380.060010] vboxdrv: 00000000e9118b6b VBoxDDR0.r0
[85616.304378] asus_wmi: Unknown key cf pressed
[88671.928448] vboxdrv: 00000000109eac22 VMMR0.r0
[88672.109998] vboxdrv: 0000000042d12552 VBoxDDR0.r0
[91506.036387] asus_wmi: Unknown key cf pressed
[92512.994542] PM: hibernation entry
[92513.015874] PM: Syncing filesystems ... 
[92513.481277] PM: done.
[92513.481287] Freezing user space processes ... (elapsed 0.006 seconds) done.
[92513.487572] OOM killer disabled.
[92513.487764] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[92513.487768] PM: Marking nosave pages: [mem 0x0009c000-0x000fffff]
[92513.487775] PM: Marking nosave pages: [mem 0x93bde000-0x93bdffff]
[92513.487778] PM: Marking nosave pages: [mem 0x99b2a000-0x9b37efff]
[92513.488049] PM: Marking nosave pages: [mem 0x9b3ff000-0xffffffff]
[92513.491166] PM: Basic memory bitmaps created
[92513.491169] PM: Preallocating image memory... done (allocated 798336 pages)
[92513.868941] PM: Allocated 3193344 kbytes in 0.37 seconds (8630.65 MB/s)
[92513.868942] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[92514.082588] Suspending console(s) (use no_console_suspend to debug)
[92514.082775] wlp2s0: deauthenticating from 2c:b0:5d:3d:4c:da by local choice (Reason: 3=DEAUTH_LEAVING)
[92514.497855] ACPI: EC: interrupt blocked
[92514.515471] Disabling non-boot CPUs ...
[92514.560072] smpboot: CPU 1 is now offline
[92514.601041] smpboot: CPU 2 is now offline
[92514.643329] smpboot: CPU 3 is now offline
[92514.646196] PM: Creating hibernation image:
[92514.744666] PM: Need to copy 797004 pages
[92514.744668] PM: Normal pages needed: 797004 + 1024, available pages: 1270085
[92515.542602] PM: Hibernation image created (797004 pages copied)
[92514.647708] Enabling non-boot CPUs ...
[92514.647745] x86: Booting SMP configuration:
[92514.647746] smpboot: Booting Node 0 Processor 1 APIC 0x2
[92514.648188]  cache: parent cpu1 should not be sleeping
[92514.648313] CPU1 is up
[92514.648330] smpboot: Booting Node 0 Processor 2 APIC 0x1
[92514.648765]  cache: parent cpu2 should not be sleeping
[92514.648900] CPU2 is up
[92514.648918] smpboot: Booting Node 0 Processor 3 APIC 0x3
[92514.649321]  cache: parent cpu3 should not be sleeping
[92514.649464] CPU3 is up
[92514.652584] ACPI: EC: interrupt unblocked
[92514.672827] rtc_cmos 00:01: Alarms can be up to one month in the future
[92514.992381] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[92514.992410] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[92514.993773] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[92514.993778] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[92514.993783] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[92514.996652] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[92514.996658] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[92514.996662] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[92514.997048] ata2.00: configured for UDMA/100
[92514.997061] ahci 0000:00:17.0: port does not support device sleep
[92515.004985] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[92515.004991] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[92515.004995] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[92515.148298] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[92515.148306] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[92515.148311] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[92515.186078] ata1.00: configured for UDMA/133
[92515.228105] PM: Using 3 thread(s) for compression
[92515.228107] PM: Compressing and saving image data (798561 pages)...
[92515.228116] PM: Image saving progress:   0%
[92515.602205] PM: Image saving progress:  10%
[92516.604333] PM: Image saving progress:  20%
[92517.324135] PM: Image saving progress:  30%
[92518.023185] PM: Image saving progress:  40%
[92519.088178] PM: Image saving progress:  50%
[92519.901842] PM: Image saving progress:  60%
[92520.899787] PM: Image saving progress:  70%
[92521.522631] PM: Image saving progress:  80%
[92522.357423] PM: Image saving progress:  90%
[92522.883952] PM: Image saving progress: 100%
[92523.322153] PM: Image saving done
[92523.322161] PM: Wrote 3194244 kbytes in 8.09 seconds (394.83 MB/s)
[92523.322875] PM: S|
[92523.426778] Suspending console(s) (use no_console_suspend to debug)
[92523.451810] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[92523.452877] sd 0:0:0:0: [sda] Stopping disk
[92523.468424] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[92523.521431] sd 1:0:0:0: [sdb] Stopping disk
[92524.448166] ACPI: EC: interrupt blocked
[92524.485594] ACPI: Preparing to enter system sleep state S3
[92524.488756] ACPI: EC: event blocked
[92524.488757] ACPI: EC: EC stopped
[92524.488759] PM: Saving platform NVS memory
[92524.488825] Disabling non-boot CPUs ...
[92524.536148] smpboot: CPU 1 is now offline
[92524.577009] smpboot: CPU 2 is now offline
[92524.609344] smpboot: CPU 3 is now offline
[92524.613187] ACPI: Low-level resume complete
[92524.613271] ACPI: EC: EC started
[92524.613272] PM: Restoring platform NVS memory
[92524.614159] Enabling non-boot CPUs ...
[92524.614189] x86: Booting SMP configuration:
[92524.614190] smpboot: Booting Node 0 Processor 1 APIC 0x2
[92524.614705]  cache: parent cpu1 should not be sleeping
[92524.614873] CPU1 is up
[92524.614891] smpboot: Booting Node 0 Processor 2 APIC 0x1
[92524.615404]  cache: parent cpu2 should not be sleeping
[92524.615561] CPU2 is up
[92524.615581] smpboot: Booting Node 0 Processor 3 APIC 0x3
[92524.616063]  cache: parent cpu3 should not be sleeping
[92524.616225] CPU3 is up
[92524.619925] ACPI: Waking up from system sleep state S3
[92524.630026] ACPI: EC: interrupt unblocked
[92524.664740] ACPI: EC: event unblocked
[92524.665034] usb usb1: root hub lost power or was reset
[92524.665038] usb usb2: root hub lost power or was reset
[92524.665419] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[92524.665865] sd 1:0:0:0: [sdb] Starting disk
[92524.666154] sd 0:0:0:0: [sda] Starting disk
[92524.669317] rtc_cmos 00:01: Alarms can be up to one month in the future
[92524.978992] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[92524.980230] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[92524.980235] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[92524.980238] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[92524.981772] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[92524.981776] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[92524.981780] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[92524.982158] ata2.00: configured for UDMA/100
[92524.982171] ahci 0000:00:17.0: port does not support device sleep
[92525.015349] usb 1-6: reset high-speed USB device number 2 using xhci_hcd
[92525.278682] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[92525.421766] acpi LNXPOWER:13: Turning OFF
[92525.421997] acpi LNXPOWER:12: Turning OFF
[92525.422170] acpi LNXPOWER:11: Turning OFF
[92525.422341] acpi LNXPOWER:10: Turning OFF
[92525.422509] acpi LNXPOWER:0f: Turning OFF
[92525.422677] acpi LNXPOWER:0e: Turning OFF
[92525.422846] acpi LNXPOWER:0d: Turning OFF
[92525.423016] acpi LNXPOWER:0c: Turning OFF
[92525.423186] acpi LNXPOWER:0b: Turning OFF
[92525.423354] acpi LNXPOWER:0a: Turning OFF
[92525.423523] acpi LNXPOWER:09: Turning OFF
[92525.423692] acpi LNXPOWER:08: Turning OFF
[92525.423860] acpi LNXPOWER:07: Turning OFF
[92525.424029] acpi LNXPOWER:06: Turning OFF
[92525.424197] acpi LNXPOWER:05: Turning OFF
[92525.424365] acpi LNXPOWER:04: Turning OFF
[92525.424535] acpi LNXPOWER:03: Turning OFF
[92525.424704] acpi LNXPOWER:02: Turning OFF
[92525.424872] acpi LNXPOWER:01: Turning OFF
[92525.425041] acpi LNXPOWER:00: Turning OFF
[92525.426610] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[92525.427602] Bluetooth: hci0: Device revision is 16
[92525.427605] Bluetooth: hci0: Secure boot is enabled
[92525.427606] Bluetooth: hci0: OTP lock is enabled
[92525.427608] Bluetooth: hci0: API lock is enabled
[92525.427609] Bluetooth: hci0: Debug lock is disabled
[92525.427611] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[92525.427616] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[92525.461568] PM: Basic memory bitmaps freed
[92525.461571] OOM killer enabled.
[92525.461571] Restarting tasks ... done.
[92525.488348] PM: hibernation exit
[92527.001035] Bluetooth: hci0: Waiting for firmware download to complete
[92527.001630] Bluetooth: hci0: Firmware loaded in 1539284 usecs
[92527.001713] Bluetooth: hci0: Waiting for device to boot
[92527.013706] Bluetooth: hci0: Device booted in 11765 usecs
[92527.013726] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[92527.016692] Bluetooth: hci0: Applying Intel DDC parameters completed
[92527.081869] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[92527.094059] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[92527.094068] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[92527.094074] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[92527.155319] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[92527.155326] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[92527.155332] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[92527.192408] ata1.00: configured for UDMA/133
[96200.612738] PM: hibernation entry
[96200.615243] PM: Syncing filesystems ... 
[96200.650899] PM: done.
[96200.650901] Freezing user space processes ... (elapsed 0.001 seconds) done.
[96200.652738] OOM killer disabled.
[96200.652802] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[96200.652803] PM: Marking nosave pages: [mem 0x0009c000-0x000fffff]
[96200.652805] PM: Marking nosave pages: [mem 0x93bde000-0x93bdffff]
[96200.652806] PM: Marking nosave pages: [mem 0x99b2a000-0x9b37efff]
[96200.652881] PM: Marking nosave pages: [mem 0x9b3ff000-0xffffffff]
[96200.653724] PM: Basic memory bitmaps created
[96200.653725] PM: Preallocating image memory... done (allocated 708937 pages)
[96202.579067] PM: Allocated 2835748 kbytes in 1.92 seconds (1476.95 MB/s)
[96202.579067] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[96202.792306] Suspending console(s) (use no_console_suspend to debug)
[96203.191021] ACPI: EC: interrupt blocked
[96203.205468] Disabling non-boot CPUs ...
[96203.251123] smpboot: CPU 1 is now offline
[96203.303458] smpboot: CPU 2 is now offline
[96203.353408] smpboot: CPU 3 is now offline
[96203.356267] PM: Creating hibernation image:
[96203.433061] PM: Need to copy 706571 pages
[96203.433063] PM: Normal pages needed: 706571 + 1024, available pages: 1360531
[96204.155878] PM: Hibernation image created (706571 pages copied)
[96203.357773] Enabling non-boot CPUs ...
[96203.357812] x86: Booting SMP configuration:
[96203.357813] smpboot: Booting Node 0 Processor 1 APIC 0x2
[96203.358251]  cache: parent cpu1 should not be sleeping
[96203.358379] CPU1 is up
[96203.358395] smpboot: Booting Node 0 Processor 2 APIC 0x1
[96203.358832]  cache: parent cpu2 should not be sleeping
[96203.358974] CPU2 is up
[96203.358993] smpboot: Booting Node 0 Processor 3 APIC 0x3
[96203.359394]  cache: parent cpu3 should not be sleeping
[96203.359542] CPU3 is up
[96203.362661] ACPI: EC: interrupt unblocked
[96203.385919] rtc_cmos 00:01: Alarms can be up to one month in the future
[96203.702992] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[96203.703030] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[96203.704840] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[96203.704847] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[96203.704853] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[96203.708562] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[96203.708569] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[96203.708574] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[96203.708993] ata2.00: configured for UDMA/100
[96203.709008] ahci 0000:00:17.0: port does not support device sleep
[96203.717372] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[96203.717379] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[96203.717385] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[96203.773194] PM: Using 3 thread(s) for compression
[96203.773197] PM: Compressing and saving image data (707952 pages)...
[96203.773218] PM: Image saving progress:   0%
[96204.127604] PM: Image saving progress:  10%
[96204.151630] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[96204.151633] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[96204.151634] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[96204.188437] ata1.00: configured for UDMA/133
[96204.515479] PM: Image saving progress:  20%
[96205.337963] PM: Image saving progress:  30%
[96206.076531] PM: Image saving progress:  40%
[96206.806431] PM: Image saving progress:  50%
[96207.573923] PM: Image saving progress:  60%
[96208.284767] PM: Image saving progress:  70%
[96209.131564] PM: Image saving progress:  80%
[96209.851875] PM: Image saving progress:  90%
[96210.149092] PM: Image saving progress: 100%
[96210.703026] PM: Image saving done
[96210.703043] PM: Wrote 2831808 kbytes in 6.92 seconds (409.22 MB/s)
[96210.704092] PM: S|
[96210.785944] Suspending console(s) (use no_console_suspend to debug)
[96210.801640] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[96210.801682] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[96210.802541] sd 0:0:0:0: [sda] Stopping disk
[96210.861947] sd 1:0:0:0: [sdb] Stopping disk
[96211.651287] ACPI: EC: interrupt blocked
[96211.688960] ACPI: Preparing to enter system sleep state S3
[96211.692099] ACPI: EC: event blocked
[96211.692101] ACPI: EC: EC stopped
[96211.692102] PM: Saving platform NVS memory
[96211.692169] Disabling non-boot CPUs ...
[96211.732836] smpboot: CPU 1 is now offline
[96211.777053] smpboot: CPU 2 is now offline
[96211.839420] smpboot: CPU 3 is now offline
[96211.843417] ACPI: Low-level resume complete
[96211.843501] ACPI: EC: EC started
[96211.843502] PM: Restoring platform NVS memory
[96211.844366] Enabling non-boot CPUs ...
[96211.844395] x86: Booting SMP configuration:
[96211.844396] smpboot: Booting Node 0 Processor 1 APIC 0x2
[96211.844915]  cache: parent cpu1 should not be sleeping
[96211.845086] CPU1 is up
[96211.845104] smpboot: Booting Node 0 Processor 2 APIC 0x1
[96211.845642]  cache: parent cpu2 should not be sleeping
[96211.845806] CPU2 is up
[96211.845825] smpboot: Booting Node 0 Processor 3 APIC 0x3
[96211.846307]  cache: parent cpu3 should not be sleeping
[96211.846476] CPU3 is up
[96211.850161] ACPI: Waking up from system sleep state S3
[96211.861053] ACPI: EC: interrupt unblocked
[96211.894794] ACPI: EC: event unblocked
[96211.895068] usb usb1: root hub lost power or was reset
[96211.895071] usb usb2: root hub lost power or was reset
[96211.895701] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[96211.897431] sd 0:0:0:0: [sda] Starting disk
[96211.897435] sd 1:0:0:0: [sdb] Starting disk
[96211.898481] rtc_cmos 00:01: Alarms can be up to one month in the future
[96212.209140] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[96212.210492] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[96212.210497] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[96212.210500] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[96212.212676] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[96212.212681] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[96212.212684] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[96212.213214] ata2.00: configured for UDMA/100
[96212.213226] ahci 0000:00:17.0: port does not support device sleep
[96212.242086] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[96212.505400] usb 1-6: reset high-speed USB device number 2 using xhci_hcd
[96212.667968] acpi LNXPOWER:13: Turning OFF
[96212.668145] acpi LNXPOWER:12: Turning OFF
[96212.668317] acpi LNXPOWER:11: Turning OFF
[96212.668488] acpi LNXPOWER:10: Turning OFF
[96212.668692] acpi LNXPOWER:0f: Turning OFF
[96212.668864] acpi LNXPOWER:0e: Turning OFF
[96212.669033] acpi LNXPOWER:0d: Turning OFF
[96212.669203] acpi LNXPOWER:0c: Turning OFF
[96212.669372] acpi LNXPOWER:0b: Turning OFF
[96212.669541] acpi LNXPOWER:0a: Turning OFF
[96212.669711] acpi LNXPOWER:09: Turning OFF
[96212.669880] acpi LNXPOWER:08: Turning OFF
[96212.670049] acpi LNXPOWER:07: Turning OFF
[96212.670217] acpi LNXPOWER:06: Turning OFF
[96212.670386] acpi LNXPOWER:05: Turning OFF
[96212.670554] acpi LNXPOWER:04: Turning OFF
[96212.670725] acpi LNXPOWER:03: Turning OFF
[96212.670895] acpi LNXPOWER:02: Turning OFF
[96212.671064] acpi LNXPOWER:01: Turning OFF
[96212.671232] acpi LNXPOWER:00: Turning OFF
[96212.672865] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[96212.673889] Bluetooth: hci0: Device revision is 16
[96212.673891] Bluetooth: hci0: Secure boot is enabled
[96212.673893] Bluetooth: hci0: OTP lock is enabled
[96212.673894] Bluetooth: hci0: API lock is enabled
[96212.673895] Bluetooth: hci0: Debug lock is disabled
[96212.673898] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[96212.697670] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[96212.736037] PM: Basic memory bitmaps freed
[96212.736039] OOM killer enabled.
[96212.736039] Restarting tasks ... done.
[96212.750646] PM: hibernation exit
[96214.155398] Bluetooth: hci0: Waiting for firmware download to complete
[96214.155726] Bluetooth: hci0: Firmware loaded in 1449379 usecs
[96214.155772] Bluetooth: hci0: Waiting for device to boot
[96214.167730] Bluetooth: hci0: Device booted in 11692 usecs
[96214.169881] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[96214.172751] Bluetooth: hci0: Applying Intel DDC parameters completed
[96214.239713] ahci 0000:00:17.0: port does not support device sleep
[96214.274999] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[96214.300293] EXT4-fs (sdb1): re-mounted. Opts: discard,commit=0
[96214.315279] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[96214.326277] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[96214.326280] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[96214.326282] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[96214.359793] EXT4-fs (sdb3): re-mounted. Opts: discard,data=ordered,commit=0
[96214.386273] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[96214.386276] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[96214.386278] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[96214.403027] EXT4-fs (sda): re-mounted. Opts: commit=0
[96214.423054] ata1.00: configured for UDMA/133
[96256.325500] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[96259.859240] wlp2s0: authenticate with 30:91:8f:a8:b9:37
[96259.867105] wlp2s0: send auth to 30:91:8f:a8:b9:37 (try 1/3)
[96259.873590] wlp2s0: authenticated
[96259.874999] wlp2s0: associate with 30:91:8f:a8:b9:37 (try 1/3)
[96259.878833] wlp2s0: RX AssocResp from 30:91:8f:a8:b9:37 (capab=0x411 status=0 aid=5)
[96259.885756] wlp2s0: associated
[96259.913734] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[98050.801517] asus_wmi: Unknown key cf pressed
[99277.865265] perf: interrupt took too long (2531 > 2500), lowering kernel.perf_event_max_sample_rate to 78900
[100307.741722] perf: interrupt took too long (3214 > 3163), lowering kernel.perf_event_max_sample_rate to 62100
[101455.747536] perf: interrupt took too long (4047 > 4017), lowering kernel.perf_event_max_sample_rate to 49200
[102591.238707] perf: interrupt took too long (5085 > 5058), lowering kernel.perf_event_max_sample_rate to 39300
[105305.837873] PM: hibernation entry
[105305.846845] PM: Syncing filesystems ... 
[105305.878781] PM: done.
[105305.878783] Freezing user space processes ... (elapsed 0.003 seconds) done.
[105305.882059] OOM killer disabled.
[105305.882176] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[105305.882178] PM: Marking nosave pages: [mem 0x0009c000-0x000fffff]
[105305.882180] PM: Marking nosave pages: [mem 0x93bde000-0x93bdffff]
[105305.882181] PM: Marking nosave pages: [mem 0x99b2a000-0x9b37efff]
[105305.882254] PM: Marking nosave pages: [mem 0x9b3ff000-0xffffffff]
[105305.883119] PM: Basic memory bitmaps created
[105305.883126] PM: Preallocating image memory... done (allocated 719561 pages)
[105307.626156] PM: Allocated 2878244 kbytes in 1.74 seconds (1654.16 MB/s)
[105307.626156] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[105307.627783] Suspending console(s) (use no_console_suspend to debug)
[105307.627866] wlp2s0: deauthenticating from 30:91:8f:a8:b9:37 by local choice (Reason: 3=DEAUTH_LEAVING)
[105307.976710] ACPI: EC: interrupt blocked
[105307.992212] Disabling non-boot CPUs ...
[105308.033596] smpboot: CPU 1 is now offline
[105308.087813] smpboot: CPU 2 is now offline
[105308.113478] smpboot: CPU 3 is now offline
[105308.116378] PM: Creating hibernation image:
[105308.220840] PM: Need to copy 717367 pages
[105308.220842] PM: Normal pages needed: 717367 + 1024, available pages: 1349733
[105308.954489] PM: Hibernation image created (717367 pages copied)
[105308.117876] Enabling non-boot CPUs ...
[105308.117911] x86: Booting SMP configuration:
[105308.117912] smpboot: Booting Node 0 Processor 1 APIC 0x2
[105308.118310]  cache: parent cpu1 should not be sleeping
[105308.118436] CPU1 is up
[105308.118454] smpboot: Booting Node 0 Processor 2 APIC 0x1
[105308.118889]  cache: parent cpu2 should not be sleeping
[105308.119023] CPU2 is up
[105308.119043] smpboot: Booting Node 0 Processor 3 APIC 0x3
[105308.119440]  cache: parent cpu3 should not be sleeping
[105308.119583] CPU3 is up
[105308.122694] ACPI: EC: interrupt unblocked
[105308.142557] rtc_cmos 00:01: Alarms can be up to one month in the future
[105308.455352] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[105308.455384] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[105308.458064] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[105308.458070] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[105308.458075] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[105308.460390] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[105308.460396] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[105308.460400] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[105308.460962] ata2.00: configured for UDMA/100
[105308.467182] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[105308.467187] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[105308.467192] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[105308.471222] ahci 0000:00:17.0: port does not support device sleep
[105308.528904] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[105308.528912] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[105308.528918] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[105308.566553] ata1.00: configured for UDMA/133
[105308.727305] PM: Using 3 thread(s) for compression
[105308.727309] PM: Compressing and saving image data (718769 pages)...
[105308.727332] PM: Image saving progress:   0%
[105309.075239] PM: Image saving progress:  10%
[105309.520217] PM: Image saving progress:  20%
[105310.435926] PM: Image saving progress:  30%
[105311.160660] PM: Image saving progress:  40%
[105312.163424] PM: Image saving progress:  50%
[105313.047893] PM: Image saving progress:  60%
[105313.531208] PM: Image saving progress:  70%
[105314.569621] PM: Image saving progress:  80%
[105315.172976] PM: Image saving progress:  90%
[105315.568980] PM: Image saving progress: 100%
[105316.049362] PM: Image saving done
[105316.049369] PM: Wrote 2875076 kbytes in 7.32 seconds (392.76 MB/s)
[105316.049887] PM: S|
[105316.150772] Suspending console(s) (use no_console_suspend to debug)
[105316.164722] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[105316.164977] sd 0:0:0:0: [sda] Stopping disk
[105316.178138] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[105316.230566] sd 1:0:0:0: [sdb] Stopping disk
[105316.799680] ACPI: EC: interrupt blocked
[105316.839046] ACPI: Preparing to enter system sleep state S3
[105316.842184] ACPI: EC: event blocked
[105316.842186] ACPI: EC: EC stopped
[105316.842187] PM: Saving platform NVS memory
[105316.842251] Disabling non-boot CPUs ...
[105316.890552] smpboot: CPU 1 is now offline
[105316.932883] smpboot: CPU 2 is now offline
[105316.982833] smpboot: CPU 3 is now offline
[105316.986939] ACPI: Low-level resume complete
[105316.987023] ACPI: EC: EC started
[105316.987024] PM: Restoring platform NVS memory
[105316.987918] Enabling non-boot CPUs ...
[105316.987947] x86: Booting SMP configuration:
[105316.987948] smpboot: Booting Node 0 Processor 1 APIC 0x2
[105316.988463]  cache: parent cpu1 should not be sleeping
[105316.988645] CPU1 is up
[105316.988664] smpboot: Booting Node 0 Processor 2 APIC 0x1
[105316.989184]  cache: parent cpu2 should not be sleeping
[105316.989345] CPU2 is up
[105316.989368] smpboot: Booting Node 0 Processor 3 APIC 0x3
[105316.989857]  cache: parent cpu3 should not be sleeping
[105316.990025] CPU3 is up
[105316.993713] ACPI: Waking up from system sleep state S3
[105317.004143] ACPI: EC: interrupt unblocked
[105317.037927] ACPI: EC: event unblocked
[105317.038945] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[105317.039141] sd 0:0:0:0: [sda] Starting disk
[105317.039143] sd 1:0:0:0: [sdb] Starting disk
[105317.039947] usb usb1: root hub lost power or was reset
[105317.039950] usb usb2: root hub lost power or was reset
[105317.042052] rtc_cmos 00:01: Alarms can be up to one month in the future
[105317.352749] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[105317.354049] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[105317.354054] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[105317.354058] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[105317.356025] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[105317.356029] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[105317.356033] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[105317.356390] ata2.00: configured for UDMA/100
[105317.366581] ahci 0000:00:17.0: port does not support device sleep
[105317.388715] usb 1-6: reset high-speed USB device number 2 using xhci_hcd
[105317.652143] usb 1-8: reset full-speed USB device number 3 using xhci_hcd
[105317.795084] acpi LNXPOWER:13: Turning OFF
[105317.795499] acpi LNXPOWER:12: Turning OFF
[105317.795693] acpi LNXPOWER:11: Turning OFF
[105317.795887] acpi LNXPOWER:10: Turning OFF
[105317.796056] acpi LNXPOWER:0f: Turning OFF
[105317.796223] acpi LNXPOWER:0e: Turning OFF
[105317.796391] acpi LNXPOWER:0d: Turning OFF
[105317.796561] acpi LNXPOWER:0c: Turning OFF
[105317.796730] acpi LNXPOWER:0b: Turning OFF
[105317.796820] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[105317.796937] acpi LNXPOWER:0a: Turning OFF
[105317.797120] acpi LNXPOWER:09: Turning OFF
[105317.797289] acpi LNXPOWER:08: Turning OFF
[105317.797457] acpi LNXPOWER:07: Turning OFF
[105317.797626] acpi LNXPOWER:06: Turning OFF
[105317.797816] acpi LNXPOWER:05: Turning OFF
[105317.797821] Bluetooth: hci0: Device revision is 16
[105317.797823] Bluetooth: hci0: Secure boot is enabled
[105317.797825] Bluetooth: hci0: OTP lock is enabled
[105317.797827] Bluetooth: hci0: API lock is enabled
[105317.797829] Bluetooth: hci0: Debug lock is disabled
[105317.797832] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[105317.797837] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[105317.798001] acpi LNXPOWER:04: Turning OFF
[105317.798184] acpi LNXPOWER:03: Turning OFF
[105317.798383] acpi LNXPOWER:02: Turning OFF
[105317.798580] acpi LNXPOWER:01: Turning OFF
[105317.798800] acpi LNXPOWER:00: Turning OFF
[105317.827088] PM: Basic memory bitmaps freed
[105317.827090] OOM killer enabled.
[105317.827090] Restarting tasks ... done.
[105317.845762] PM: hibernation exit
[105319.096815] ahci 0000:00:17.0: port does not support device sleep
[105319.098659] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[105319.198948] Bluetooth: hci0: Waiting for firmware download to complete
[105319.199741] Bluetooth: hci0: Firmware loaded in 1371381 usecs
[105319.199752] Bluetooth: hci0: Waiting for device to boot
[105319.211759] Bluetooth: hci0: Device booted in 11732 usecs
[105319.211763] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[105319.214766] Bluetooth: hci0: Applying Intel DDC parameters completed
[105319.236232] EXT4-fs (sdb1): re-mounted. Opts: discard,commit=600
[105319.288939] EXT4-fs (sdb3): re-mounted. Opts: discard,data=ordered,commit=600
[105319.300553] EXT4-fs (sda): re-mounted. Opts: commit=600
[105319.575248] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[105319.586101] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[105319.586105] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[105319.586107] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[105319.646010] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[105319.646013] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[105319.646015] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[105319.682774] ata1.00: configured for UDMA/133
[105321.449905] wlp2s0: authenticate with 30:91:8f:a8:b9:37
[105321.457235] wlp2s0: send auth to 30:91:8f:a8:b9:37 (try 1/3)
[105321.485481] wlp2s0: authenticated
[105321.488567] wlp2s0: associate with 30:91:8f:a8:b9:37 (try 1/3)
[105321.492185] wlp2s0: RX AssocResp from 30:91:8f:a8:b9:37 (capab=0x411 status=0 aid=5)
[105321.501877] wlp2s0: associated
[105552.252764] INFO: task hdparm:26549 blocked for more than 120 seconds.
[105552.252776]       Tainted: G           O      4.17.3-1-ARCH #1
[105552.252781] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[105552.252787] hdparm          D    0 26549  26547 0x00000000
[105552.252795] Call Trace:
[105552.252814]  ? __schedule+0x282/0x890
[105552.252823]  ? preempt_count_add+0x68/0xa0
[105552.252832]  schedule+0x32/0x90
[105552.252840]  blk_queue_enter+0x189/0x250
[105552.252849]  ? wait_woken+0x80/0x80
[105552.252857]  blk_get_request_flags+0xc2/0x170
[105552.252867]  ? walk_component+0x26c/0x2d0
[105552.252875]  sg_io+0xa3/0x3f0
[105552.252883]  ? terminate_walk+0xeb/0x100
[105552.252892]  ? lock_page_memcg+0x11/0x80
[105552.252900]  ? page_add_file_rmap+0x17/0x260
[105552.252907]  scsi_cmd_ioctl+0x1b0/0x3d0
[105552.252924]  sd_ioctl+0xad/0x180 [sd_mod]
[105552.252934]  blkdev_ioctl+0x3bc/0x990
[105552.252945]  block_ioctl+0x39/0x40
[105552.252953]  do_vfs_ioctl+0xa4/0x610
[105552.252963]  ? __do_page_fault+0x237/0x570
[105552.252971]  ksys_ioctl+0x60/0x90
[105552.252979]  __x64_sys_ioctl+0x16/0x20
[105552.252987]  do_syscall_64+0x5b/0x170
[105552.252994]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[105552.253001] RIP: 0033:0x7f5dbc3e2667
[105552.253004] RSP: 002b:00007fffba186ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[105552.253011] RAX: ffffffffffffffda RBX: 00007fffba186e09 RCX: 00007f5dbc3e2667
[105552.253014] RDX: 00007fffba186d10 RSI: 0000000000002285 RDI: 0000000000000003
[105552.253017] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[105552.253021] R10: 00007fffba186d10 R11: 0000000000000246 R12: 0000000000000000
[105552.253023] R13: 0000000000000000 R14: 0000000000000000 R15: 00007fffba186d80
[105675.130734] INFO: task hdparm:26549 blocked for more than 120 seconds.
[105675.130745]       Tainted: G           O      4.17.3-1-ARCH #1
[105675.130750] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[105675.130755] hdparm          D    0 26549  26547 0x00000000
[105675.130761] Call Trace:
[105675.130779]  ? __schedule+0x282/0x890
[105675.130786]  ? preempt_count_add+0x68/0xa0
[105675.130793]  schedule+0x32/0x90
[105675.130799]  blk_queue_enter+0x189/0x250
[105675.130805]  ? wait_woken+0x80/0x80
[105675.130811]  blk_get_request_flags+0xc2/0x170
[105675.130818]  ? walk_component+0x26c/0x2d0
[105675.130823]  sg_io+0xa3/0x3f0
[105675.130829]  ? terminate_walk+0xeb/0x100
[105675.130835]  ? lock_page_memcg+0x11/0x80
[105675.130840]  ? page_add_file_rmap+0x17/0x260
[105675.130846]  scsi_cmd_ioctl+0x1b0/0x3d0
[105675.130862]  sd_ioctl+0xad/0x180 [sd_mod]
[105675.130870]  blkdev_ioctl+0x3bc/0x990
[105675.130879]  block_ioctl+0x39/0x40
[105675.130886]  do_vfs_ioctl+0xa4/0x610
[105675.130894]  ? __do_page_fault+0x237/0x570
[105675.130902]  ksys_ioctl+0x60/0x90
[105675.130909]  __x64_sys_ioctl+0x16/0x20
[105675.130916]  do_syscall_64+0x5b/0x170
[105675.130922]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[105675.130928] RIP: 0033:0x7f5dbc3e2667
[105675.130931] RSP: 002b:00007fffba186ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[105675.130937] RAX: ffffffffffffffda RBX: 00007fffba186e09 RCX: 00007f5dbc3e2667
[105675.130940] RDX: 00007fffba186d10 RSI: 0000000000002285 RDI: 0000000000000003
[105675.130943] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[105675.130946] R10: 00007fffba186d10 R11: 0000000000000246 R12: 0000000000000000
[105675.130948] R13: 0000000000000000 R14: 0000000000000000 R15: 00007fffba186d80
[105798.009830] INFO: task pool:3025 blocked for more than 120 seconds.
[105798.009840]       Tainted: G           O      4.17.3-1-ARCH #1
[105798.009845] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[105798.009850] pool            D    0  3025      1 0x00000000
[105798.009857] Call Trace:
[105798.009876]  ? __schedule+0x282/0x890
[105798.009883]  ? enqueue_entity+0x3d0/0xc20
[105798.009891]  schedule+0x32/0x90
[105798.009896]  schedule_timeout+0x311/0x4a0
[105798.009905]  ? native_sched_clock+0x5d/0x90
[105798.009911]  ? resched_curr+0x23/0xd0
[105798.009919]  wait_for_common+0x15f/0x190
[105798.009925]  ? wake_up_q+0x70/0x70
[105798.009931]  ? drain_workqueue+0x120/0x120
[105798.009935]  flush_work+0x10e/0x1c0
[105798.009943]  ? flush_workqueue_prep_pwqs+0x130/0x130
[105798.009949]  __cancel_work_timer+0x105/0x190
[105798.009957]  ? disk_map_sector_rcu+0x70/0x70
[105798.009962]  ? kobj_lookup+0xf1/0x160
[105798.009970]  disk_block_events+0x6f/0x90
[105798.009979]  __blkdev_get+0x7b/0x4f0
[105798.009986]  blkdev_get+0x108/0x340
[105798.009993]  ? inode_permission+0x31/0x180
[105798.009998]  ? preempt_count_add+0x68/0xa0
[105798.010002]  ? _raw_spin_lock+0x13/0x40
[105798.010009]  ? bd_acquire+0xc0/0xc0
[105798.010016]  do_dentry_open+0x14c/0x300
[105798.010023]  path_openat+0x30c/0x1240
[105798.010033]  do_filp_open+0x93/0x100
[105798.010040]  ? __switch_to_asm+0x34/0x70
[105798.010044]  ? __switch_to_asm+0x40/0x70
[105798.010048]  ? __switch_to_asm+0x34/0x70
[105798.010053]  ? __check_object_size+0xfb/0x180
[105798.010059]  ? _raw_spin_unlock+0x16/0x30
[105798.010064]  do_sys_open+0x186/0x210
[105798.010073]  do_syscall_64+0x5b/0x170
[105798.010078]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[105798.010085] RIP: 0033:0x7f9105887f4e
[105798.010088] RSP: 002b:00007f910285ead0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101
[105798.010094] RAX: ffffffffffffffda RBX: 00005561c3851040 RCX: 00007f9105887f4e
[105798.010097] RDX: 0000000000000800 RSI: 00005561c38bc3b0 RDI: 00000000ffffff9c
[105798.010100] RBP: 00005561c38bc120 R08: 0000000000000000 R09: 00646975752f6d64
[105798.010102] R10: 0000000000000000 R11: 0000000000000293 R12: 00007f910285ecc0
[105798.010105] R13: 00007f910285ebe8 R14: 0000000000000000 R15: 00005561c38bc120
[105798.010245] INFO: task hdparm:26549 blocked for more than 120 seconds.
[105798.010251]       Tainted: G           O      4.17.3-1-ARCH #1
[105798.010254] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[105798.010259] hdparm          D    0 26549  26547 0x00000000
[105798.010264] Call Trace:
[105798.010273]  ? __schedule+0x282/0x890
[105798.010278]  ? preempt_count_add+0x68/0xa0
[105798.010284]  schedule+0x32/0x90
[105798.010289]  blk_queue_enter+0x189/0x250
[105798.010295]  ? wait_woken+0x80/0x80
[105798.010300]  blk_get_request_flags+0xc2/0x170
[105798.010305]  ? walk_component+0x26c/0x2d0
[105798.010310]  sg_io+0xa3/0x3f0
[105798.010316]  ? terminate_walk+0xeb/0x100
[105798.010322]  ? lock_page_memcg+0x11/0x80
[105798.010327]  ? page_add_file_rmap+0x17/0x260
[105798.010333]  scsi_cmd_ioctl+0x1b0/0x3d0
[105798.010349]  sd_ioctl+0xad/0x180 [sd_mod]
[105798.010357]  blkdev_ioctl+0x3bc/0x990
[105798.010365]  block_ioctl+0x39/0x40
[105798.010372]  do_vfs_ioctl+0xa4/0x610
[105798.010380]  ? __do_page_fault+0x237/0x570
[105798.010388]  ksys_ioctl+0x60/0x90
[105798.010395]  __x64_sys_ioctl+0x16/0x20
[105798.010401]  do_syscall_64+0x5b/0x170
[105798.010407]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[105798.010411] RIP: 0033:0x7f5dbc3e2667
[105798.010414] RSP: 002b:00007fffba186ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[105798.010419] RAX: ffffffffffffffda RBX: 00007fffba186e09 RCX: 00007f5dbc3e2667
[105798.010422] RDX: 00007fffba186d10 RSI: 0000000000002285 RDI: 0000000000000003
[105798.010424] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[105798.010427] R10: 00007fffba186d10 R11: 0000000000000246 R12: 0000000000000000
[105798.010430] R13: 0000000000000000 R14: 0000000000000000 R15: 00007fffba186d80
[105920.888963] INFO: task pool:3025 blocked for more than 120 seconds.
[105920.888976]       Tainted: G           O      4.17.3-1-ARCH #1
[105920.888982] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[105920.888989] pool            D    0  3025      1 0x00000000
[105920.888998] Call Trace:
[105920.889019]  ? __schedule+0x282/0x890
[105920.889029]  ? enqueue_entity+0x3d0/0xc20
[105920.889039]  schedule+0x32/0x90
[105920.889045]  schedule_timeout+0x311/0x4a0
[105920.889056]  ? native_sched_clock+0x5d/0x90
[105920.889064]  ? resched_curr+0x23/0xd0
[105920.889074]  wait_for_common+0x15f/0x190
[105920.889083]  ? wake_up_q+0x70/0x70
[105920.889091]  ? drain_workqueue+0x120/0x120
[105920.889096]  flush_work+0x10e/0x1c0
[105920.889106]  ? flush_workqueue_prep_pwqs+0x130/0x130
[105920.889114]  __cancel_work_timer+0x105/0x190
[105920.889124]  ? disk_map_sector_rcu+0x70/0x70
[105920.889130]  ? kobj_lookup+0xf1/0x160
[105920.889139]  disk_block_events+0x6f/0x90
[105920.889150]  __blkdev_get+0x7b/0x4f0
[105920.889160]  blkdev_get+0x108/0x340
[105920.889168]  ? inode_permission+0x31/0x180
[105920.889175]  ? preempt_count_add+0x68/0xa0
[105920.889180]  ? _raw_spin_lock+0x13/0x40
[105920.889188]  ? bd_acquire+0xc0/0xc0
[105920.889196]  do_dentry_open+0x14c/0x300
[105920.889206]  path_openat+0x30c/0x1240
[105920.889219]  do_filp_open+0x93/0x100
[105920.889229]  ? __switch_to_asm+0x34/0x70
[105920.889235]  ? __switch_to_asm+0x40/0x70
[105920.889241]  ? __switch_to_asm+0x34/0x70
[105920.889248]  ? __check_object_size+0xfb/0x180
[105920.889256]  ? _raw_spin_unlock+0x16/0x30
[105920.889264]  do_sys_open+0x186/0x210
[105920.889278]  do_syscall_64+0x5b/0x170
[105920.889289]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[105920.889298] RIP: 0033:0x7f9105887f4e
[105920.889303] RSP: 002b:00007f910285ead0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101
[105920.889311] RAX: ffffffffffffffda RBX: 00005561c3851040 RCX: 00007f9105887f4e
[105920.889315] RDX: 0000000000000800 RSI: 00005561c38bc3b0 RDI: 00000000ffffff9c
[105920.889319] RBP: 00005561c38bc120 R08: 0000000000000000 R09: 00646975752f6d64
[105920.889322] R10: 0000000000000000 R11: 0000000000000293 R12: 00007f910285ecc0
[105920.889326] R13: 00007f910285ebe8 R14: 0000000000000000 R15: 00005561c38bc120
[105920.889494] INFO: task hdparm:26549 blocked for more than 120 seconds.
[105920.889502]       Tainted: G           O      4.17.3-1-ARCH #1
[105920.889507] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[105920.889512] hdparm          D    0 26549  26547 0x00000000
[105920.889519] Call Trace:
[105920.889532]  ? __schedule+0x282/0x890
[105920.889539]  ? preempt_count_add+0x68/0xa0
[105920.889548]  schedule+0x32/0x90
[105920.889555]  blk_queue_enter+0x189/0x250
[105920.889562]  ? wait_woken+0x80/0x80
[105920.889569]  blk_get_request_flags+0xc2/0x170
[105920.889577]  ? walk_component+0x26c/0x2d0
[105920.889584]  sg_io+0xa3/0x3f0
[105920.889592]  ? terminate_walk+0xeb/0x100
[105920.889599]  ? lock_page_memcg+0x11/0x80
[105920.889607]  ? page_add_file_rmap+0x17/0x260
[105920.889614]  scsi_cmd_ioctl+0x1b0/0x3d0
[105920.889634]  sd_ioctl+0xad/0x180 [sd_mod]
[105920.889645]  blkdev_ioctl+0x3bc/0x990
[105920.889657]  block_ioctl+0x39/0x40
[105920.889665]  do_vfs_ioctl+0xa4/0x610
[105920.889677]  ? __do_page_fault+0x237/0x570
[105920.889686]  ksys_ioctl+0x60/0x90
[105920.889695]  __x64_sys_ioctl+0x16/0x20
[105920.889703]  do_syscall_64+0x5b/0x170
[105920.889710]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[105920.889716] RIP: 0033:0x7f5dbc3e2667
[105920.889720] RSP: 002b:00007fffba186ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[105920.889726] RAX: ffffffffffffffda RBX: 00007fffba186e09 RCX: 00007f5dbc3e2667
[105920.889730] RDX: 00007fffba186d10 RSI: 0000000000002285 RDI: 0000000000000003
[105920.889734] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[105920.889738] R10: 00007fffba186d10 R11: 0000000000000246 R12: 0000000000000000
[105920.889741] R13: 0000000000000000 R14: 0000000000000000 R15: 00007fffba186d80
[106043.768268] INFO: task pool:3025 blocked for more than 120 seconds.
[106043.768279]       Tainted: G           O      4.17.3-1-ARCH #1
[106043.768284] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[106043.768290] pool            D    0  3025      1 0x00000000
[106043.768298] Call Trace:
[106043.768317]  ? __schedule+0x282/0x890
[106043.768325]  ? enqueue_entity+0x3d0/0xc20
[106043.768336]  schedule+0x32/0x90
[106043.768342]  schedule_timeout+0x311/0x4a0
[106043.768352]  ? native_sched_clock+0x5d/0x90
[106043.768361]  ? resched_curr+0x23/0xd0
[106043.768372]  wait_for_common+0x15f/0x190
[106043.768380]  ? wake_up_q+0x70/0x70
[106043.768387]  ? drain_workqueue+0x120/0x120
[106043.768394]  flush_work+0x10e/0x1c0
[106043.768405]  ? flush_workqueue_prep_pwqs+0x130/0x130
[106043.768414]  __cancel_work_timer+0x105/0x190
[106043.768425]  ? disk_map_sector_rcu+0x70/0x70
[106043.768432]  ? kobj_lookup+0xf1/0x160
[106043.768443]  disk_block_events+0x6f/0x90
[106043.768452]  __blkdev_get+0x7b/0x4f0
[106043.768464]  blkdev_get+0x108/0x340
[106043.768473]  ? inode_permission+0x31/0x180
[106043.768478]  ? preempt_count_add+0x68/0xa0
[106043.768485]  ? _raw_spin_lock+0x13/0x40
[106043.768492]  ? bd_acquire+0xc0/0xc0
[106043.768500]  do_dentry_open+0x14c/0x300
[106043.768508]  path_openat+0x30c/0x1240
[106043.768520]  do_filp_open+0x93/0x100
[106043.768529]  ? __switch_to_asm+0x34/0x70
[106043.768535]  ? __switch_to_asm+0x40/0x70
[106043.768540]  ? __switch_to_asm+0x34/0x70
[106043.768547]  ? __check_object_size+0xfb/0x180
[106043.768554]  ? _raw_spin_unlock+0x16/0x30
[106043.768561]  do_sys_open+0x186/0x210
[106043.768575]  do_syscall_64+0x5b/0x170
[106043.768581]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[106043.768586] RIP: 0033:0x7f9105887f4e
[106043.768589] RSP: 002b:00007f910285ead0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101
[106043.768595] RAX: ffffffffffffffda RBX: 00005561c3851040 RCX: 00007f9105887f4e
[106043.768597] RDX: 0000000000000800 RSI: 00005561c38bc3b0 RDI: 00000000ffffff9c
[106043.768600] RBP: 00005561c38bc120 R08: 0000000000000000 R09: 00646975752f6d64
[106043.768602] R10: 0000000000000000 R11: 0000000000000293 R12: 00007f910285ecc0
[106043.768605] R13: 00007f910285ebe8 R14: 0000000000000000 R15: 00005561c38bc120
[106043.768735] INFO: task hdparm:26549 blocked for more than 120 seconds.
[106043.768742]       Tainted: G           O      4.17.3-1-ARCH #1
[106043.768745] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[106043.768749] hdparm          D    0 26549  26547 0x00000000
[106043.768753] Call Trace:
[106043.768762]  ? __schedule+0x282/0x890
[106043.768767]  ? preempt_count_add+0x68/0xa0
[106043.768773]  schedule+0x32/0x90
[106043.768778]  blk_queue_enter+0x189/0x250
[106043.768783]  ? wait_woken+0x80/0x80
[106043.768787]  blk_get_request_flags+0xc2/0x170
[106043.768792]  ? walk_component+0x26c/0x2d0
[106043.768797]  sg_io+0xa3/0x3f0
[106043.768802]  ? terminate_walk+0xeb/0x100
[106043.768808]  ? lock_page_memcg+0x11/0x80
[106043.768812]  ? page_add_file_rmap+0x17/0x260
[106043.768817]  scsi_cmd_ioctl+0x1b0/0x3d0
[106043.768830]  sd_ioctl+0xad/0x180 [sd_mod]
[106043.768837]  blkdev_ioctl+0x3bc/0x990
[106043.768844]  block_ioctl+0x39/0x40
[106043.768851]  do_vfs_ioctl+0xa4/0x610
[106043.768859]  ? __do_page_fault+0x237/0x570
[106043.768865]  ksys_ioctl+0x60/0x90
[106043.768872]  __x64_sys_ioctl+0x16/0x20
[106043.768877]  do_syscall_64+0x5b/0x170
[106043.768882]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[106043.768886] RIP: 0033:0x7f5dbc3e2667
[106043.768888] RSP: 002b:00007fffba186ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[106043.768893] RAX: ffffffffffffffda RBX: 00007fffba186e09 RCX: 00007f5dbc3e2667
[106043.768896] RDX: 00007fffba186d10 RSI: 0000000000002285 RDI: 0000000000000003
[106043.768898] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[106043.768900] R10: 00007fffba186d10 R11: 0000000000000246 R12: 0000000000000000
[106043.768902] R13: 0000000000000000 R14: 0000000000000000 R15: 00007fffba186d80
[106166.647526] INFO: task pool:3025 blocked for more than 120 seconds.
[106166.647539]       Tainted: G           O      4.17.3-1-ARCH #1
[106166.647544] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[106166.647549] pool            D    0  3025      1 0x00000000
[106166.647558] Call Trace:
[106166.647578]  ? __schedule+0x282/0x890
[106166.647588]  ? enqueue_entity+0x3d0/0xc20
[106166.647597]  schedule+0x32/0x90
[106166.647603]  schedule_timeout+0x311/0x4a0
[106166.647613]  ? native_sched_clock+0x5d/0x90
[106166.647621]  ? resched_curr+0x23/0xd0
[106166.647629]  wait_for_common+0x15f/0x190
[106166.647637]  ? wake_up_q+0x70/0x70
[106166.647643]  ? drain_workqueue+0x120/0x120
[106166.647648]  flush_work+0x10e/0x1c0
[106166.647658]  ? flush_workqueue_prep_pwqs+0x130/0x130
[106166.647665]  __cancel_work_timer+0x105/0x190
[106166.647674]  ? disk_map_sector_rcu+0x70/0x70
[106166.647680]  ? kobj_lookup+0xf1/0x160
[106166.647689]  disk_block_events+0x6f/0x90
[106166.647700]  __blkdev_get+0x7b/0x4f0
[106166.647710]  blkdev_get+0x108/0x340
[106166.647718]  ? inode_permission+0x31/0x180
[106166.647723]  ? preempt_count_add+0x68/0xa0
[106166.647729]  ? _raw_spin_lock+0x13/0x40
[106166.647736]  ? bd_acquire+0xc0/0xc0
[106166.647745]  do_dentry_open+0x14c/0x300
[106166.647754]  path_openat+0x30c/0x1240
[106166.647766]  do_filp_open+0x93/0x100
[106166.647775]  ? __switch_to_asm+0x34/0x70
[106166.647781]  ? __switch_to_asm+0x40/0x70
[106166.647785]  ? __switch_to_asm+0x34/0x70
[106166.647792]  ? __check_object_size+0xfb/0x180
[106166.647799]  ? _raw_spin_unlock+0x16/0x30
[106166.647807]  do_sys_open+0x186/0x210
[106166.647818]  do_syscall_64+0x5b/0x170
[106166.647826]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[106166.647834] RIP: 0033:0x7f9105887f4e
[106166.647839] RSP: 002b:00007f910285ead0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101
[106166.647846] RAX: ffffffffffffffda RBX: 00005561c3851040 RCX: 00007f9105887f4e
[106166.647850] RDX: 0000000000000800 RSI: 00005561c38bc3b0 RDI: 00000000ffffff9c
[106166.647853] RBP: 00005561c38bc120 R08: 0000000000000000 R09: 00646975752f6d64
[106166.647857] R10: 0000000000000000 R11: 0000000000000293 R12: 00007f910285ecc0
[106166.647860] R13: 00007f910285ebe8 R14: 0000000000000000 R15: 00005561c38bc120
[106166.648013] INFO: task hdparm:26549 blocked for more than 120 seconds.
[106166.648020]       Tainted: G           O      4.17.3-1-ARCH #1
[106166.648023] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[106166.648028] hdparm          D    0 26549  26547 0x00000000
[106166.648033] Call Trace:
[106166.648043]  ? __schedule+0x282/0x890
[106166.648048]  ? preempt_count_add+0x68/0xa0
[106166.648055]  schedule+0x32/0x90
[106166.648060]  blk_queue_enter+0x189/0x250
[106166.648066]  ? wait_woken+0x80/0x80
[106166.648071]  blk_get_request_flags+0xc2/0x170
[106166.648077]  ? walk_component+0x26c/0x2d0
[106166.648082]  sg_io+0xa3/0x3f0
[106166.648088]  ? terminate_walk+0xeb/0x100
[106166.648094]  ? lock_page_memcg+0x11/0x80
[106166.648099]  ? page_add_file_rmap+0x17/0x260
[106166.648105]  scsi_cmd_ioctl+0x1b0/0x3d0
[106166.648120]  sd_ioctl+0xad/0x180 [sd_mod]
[106166.648128]  blkdev_ioctl+0x3bc/0x990
[106166.648136]  block_ioctl+0x39/0x40
[106166.648143]  do_vfs_ioctl+0xa4/0x610
[106166.648152]  ? __do_page_fault+0x237/0x570
[106166.648159]  ksys_ioctl+0x60/0x90
[106166.648166]  __x64_sys_ioctl+0x16/0x20
[106166.648173]  do_syscall_64+0x5b/0x170
[106166.648179]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[106166.648182] RIP: 0033:0x7f5dbc3e2667
[106166.648185] RSP: 002b:00007fffba186ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[106166.648190] RAX: ffffffffffffffda RBX: 00007fffba186e09 RCX: 00007f5dbc3e2667
[106166.648193] RDX: 00007fffba186d10 RSI: 0000000000002285 RDI: 0000000000000003
[106166.648195] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[106166.648198] R10: 00007fffba186d10 R11: 0000000000000246 R12: 0000000000000000
[106166.648200] R13: 0000000000000000 R14: 0000000000000000 R15: 00007fffba186d80
[109370.546621] PM: hibernation entry
[109370.557872] PM: Syncing filesystems ... 
[109489.156633] wlp2s0: authenticate with 30:91:8f:a8:b9:37
[109489.164554] wlp2s0: send auth to 30:91:8f:a8:b9:37 (try 1/3)
[109489.168102] wlp2s0: authenticated
[109489.174696] wlp2s0: associate with 30:91:8f:a8:b9:37 (try 1/3)
[109489.180167] wlp2s0: RX AssocResp from 30:91:8f:a8:b9:37 (capab=0x411 status=0 aid=3)
[109489.185659] wlp2s0: associated
[109497.799561] wlp2s0: authenticate with 30:91:8f:a8:b9:37
[109497.808690] wlp2s0: send auth to 30:91:8f:a8:b9:37 (try 1/3)
[109497.864712] wlp2s0: send auth to 30:91:8f:a8:b9:37 (try 2/3)
[109497.912869] wlp2s0: send auth to 30:91:8f:a8:b9:37 (try 3/3)
[109497.976535] wlp2s0: authentication with 30:91:8f:a8:b9:37 timed out
[109509.875322] wlp2s0: authenticate with 30:91:8f:a8:b9:37
[109509.886144] wlp2s0: send auth to 30:91:8f:a8:b9:37 (try 1/3)
[109509.893078] wlp2s0: authenticated
[109509.894363] wlp2s0: associate with 30:91:8f:a8:b9:37 (try 1/3)
[109509.906527] wlp2s0: RX AssocResp from 30:91:8f:a8:b9:37 (capab=0x411 status=0 aid=3)
[109509.917322] wlp2s0: associated
[109533.463609] wlp2s0: authenticate with 30:91:8f:a8:b9:37
[109533.470958] wlp2s0: send auth to 30:91:8f:a8:b9:37 (try 1/3)
[109533.526528] wlp2s0: send auth to 30:91:8f:a8:b9:37 (try 2/3)
[109533.602780] wlp2s0: send auth to 30:91:8f:a8:b9:37 (try 3/3)
[109533.676222] wlp2s0: authentication with 30:91:8f:a8:b9:37 timed out
[111546.044823] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[111549.547796] wlp2s0: authenticate with 2c:b0:5d:3d:4c:da
[111549.555980] wlp2s0: send auth to 2c:b0:5d:3d:4c:da (try 1/3)
[111549.562675] wlp2s0: authenticated
[111549.563188] wlp2s0: associate with 2c:b0:5d:3d:4c:da (try 1/3)
[111549.566991] wlp2s0: RX AssocResp from 2c:b0:5d:3d:4c:da (capab=0x411 status=0 aid=17)
[111549.570367] wlp2s0: associated
[111549.610484] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready

jbenge1 · 2018-07-06 07:46:44

Also trying to do a sanity check on /dev/sda it hangs at...

 sudo smartctl -t short /dev/sda
[sudo] password for justin: 
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.17.3-1-ARCH] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

seth · 2018-07-06 13:59:09

...
/sys/firmware/acpi/interrupts/gpe66:     104  EN     enabled      unmasked
...
/sys/firmware/acpi/interrupts/gpe50:    1301  EN     enabled      unmasked
....

How long was the system up when you dumped this? (approximately)
Is this a macbook?
https://wiki.archlinux.org/index.php/ma … g_high_CPU (see the link anyway)

jbenge1 · 2018-07-06 15:05:03

Just over 24 hours, maybe around 28 hours? and no it is an Asus Vivobook. I've disabled both, and am still experiencing the issue...

seth · 2018-07-06 15:39:56

Disabled after things went south or before?

jbenge1 · 2018-07-06 15:53:27

I tried after, and then I tried directly after rebooting the machine

jbenge1 · 2018-07-07 10:26:14

I may have been a bit quick to jump the gun, after the initial spike, everything seems to have normalized again, so I am marking as solved at this point! Thanks for the help!!

Arch Linux

#1 2018-07-03 15:49:42

[SOLVED]High load average and several users logged in

#2 2018-07-03 15:58:09

Re: [SOLVED]High load average and several users logged in

#3 2018-07-03 16:02:00

Re: [SOLVED]High load average and several users logged in

#4 2018-07-03 16:40:19

Re: [SOLVED]High load average and several users logged in

#5 2018-07-03 17:03:40

Re: [SOLVED]High load average and several users logged in

#6 2018-07-03 17:12:30

Re: [SOLVED]High load average and several users logged in

#7 2018-07-03 19:06:12

Re: [SOLVED]High load average and several users logged in

#8 2018-07-03 20:58:46

Re: [SOLVED]High load average and several users logged in

#9 2018-07-03 22:14:48

Re: [SOLVED]High load average and several users logged in

#10 2018-07-06 05:24:53

Re: [SOLVED]High load average and several users logged in

#11 2018-07-06 05:43:43

Re: [SOLVED]High load average and several users logged in

#12 2018-07-06 07:13:25

Re: [SOLVED]High load average and several users logged in

#13 2018-07-06 07:46:44

Re: [SOLVED]High load average and several users logged in

#14 2018-07-06 13:59:09

Re: [SOLVED]High load average and several users logged in

#15 2018-07-06 15:05:03

Re: [SOLVED]High load average and several users logged in

#16 2018-07-06 15:39:56

Re: [SOLVED]High load average and several users logged in

#17 2018-07-06 15:53:27

Re: [SOLVED]High load average and several users logged in

#18 2018-07-07 10:26:14

Re: [SOLVED]High load average and several users logged in

Board footer