You are not logged in.

#1 2018-07-04 02:38:23

ticianolage
Member
Registered: 2017-02-15
Posts: 25

Bumblebee broken after upgrade...

Hello,

After a system upgrade my bumblebee installation (which was running fine) can't run anymore. I have a GTX 1060 so my card is still supported by the main driver. Also, I have bbswitch installed but when I boot and cat the bbswitch file the discrete card is on.

When I try

$ optirun glxgeras

[ 1122.225840] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please

[ 1122.225871] [ERROR]Aborting because fallback start is disabled.

So I look at

$ systemctl status bumblebeed
● bumblebeed.service - Bumblebee C Daemon
   Loaded: loaded (/usr/lib/systemd/system/bumblebeed.service; enabled; vendor preset: disabled)
   Active: active (running) since Tue 2018-07-03 23:36:22 -03; 27s ago
 Main PID: 3213 (bumblebeed)
    Tasks: 1 (limit: 4915)
   Memory: 944.0K
   CGroup: /system.slice/bumblebeed.service
           └─3213 /usr/bin/bumblebeed

jul 03 23:36:24 ArchBlade bumblebeed[3213]: [ 1122.225779] [ERROR][XORG] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
jul 03 23:36:24 ArchBlade bumblebeed[3213]: [ 1122.225781] [ERROR][XORG] (EE) NVIDIA(0): Failing initialization of X screen 0
jul 03 23:36:24 ArchBlade bumblebeed[3213]: [ 1122.225784] [ERROR][XORG] (EE) Screen(s) found, but none have a usable configuration.
jul 03 23:36:24 ArchBlade bumblebeed[3213]: [ 1122.225787] [ERROR][XORG] (EE)
jul 03 23:36:24 ArchBlade bumblebeed[3213]: [ 1122.225789] [ERROR][XORG] (EE) no screens found(EE)
jul 03 23:36:24 ArchBlade bumblebeed[3213]: [ 1122.225792] [ERROR][XORG] (EE)
jul 03 23:36:24 ArchBlade bumblebeed[3213]: [ 1122.225796] [ERROR][XORG] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
jul 03 23:36:24 ArchBlade bumblebeed[3213]: [ 1122.225799] [ERROR][XORG] (EE)
jul 03 23:36:24 ArchBlade bumblebeed[3213]: [ 1122.225801] [ERROR][XORG] (EE) Server terminated with error (1). Closing log file.
jul 03 23:36:24 ArchBlade bumblebeed[3213]: [ 1122.225804] [ERROR]X did not start properly

My bumblebee.conf

# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia:/usr/lib:/usr/lib32
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

And xorg.conf.nvidia (in bumblebee folder)

Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "true"
    Option      "AutoAddGPU" "false"
EndSection

Section "Screen"
    Identifier "Default Screen"
    Device "DiscreteNvidia"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
#   BusID "PCI:01:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSection

Offline

#2 2018-07-04 08:35:21

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,427

Re: Bumblebee broken after upgrade...

GTX 1060 have a known issue with the latest driver: https://bbs.archlinux.org/viewtopic.php?id=237001 try 390xx instead

Offline

#3 2018-07-04 12:11:38

ticianolage
Member
Registered: 2017-02-15
Posts: 25

Re: Bumblebee broken after upgrade...

V1del wrote:

GTX 1060 have a known issue with the latest driver: https://bbs.archlinux.org/viewtopic.php?id=237001 try 390xx instead

I've downgraded and still don't work. 390-xx don't work either.

Offline

#4 2018-07-04 13:18:06

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 21,427

Re: Bumblebee broken after upgrade...

Post the resulting log file the invocation mentions, a pacman.log as well as a complete dmesg after triggering the issue.

Last edited by V1del (2018-07-04 13:18:45)

Offline

Board footer

Powered by FluxBB