You are not logged in.
Pages: 1
Hi, I've got an Asus UX305U zenbook. This laptop doesn't come with a Ethernet port but does come with an USB to Ethernet adaptor. This adaptor doesn't seem to work automatically and I can't figure out how to set it up.
Output of lsusb:
Bus 002 Device 010: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 8087:0a2a Intel Corp.
Bus 001 Device 003: ID 04f2:b56b Chicony Electronics Co., Ltd
Bus 001 Device 013: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard
Bus 001 Device 006: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubOutput of ip link:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: wlp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000
link/ether 00:21:5c:fb:49:d3 brd ff:ff:ff:ff:ff:ffLast edited by WalterSmuts (2018-07-27 12:51:47)
Offline
Please post the output of dmesg
Offline
Mmmm... I just restarted my computer with the adaptor in and it seems to have worked. But now the question is: how do I make it "plug and play"
Output of dmesg for what it's worth:
[ 0.000000] microcode: microcode updated early to revision 0xc2, date = 2017-11-16
[ 0.000000] Linux version 4.17.8-1-ARCH (builduser@heftig-21239) (gcc version 8.1.1 20180531 (GCC)) #1 SMP PREEMPT Wed Jul 18 09:56:24 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=30c9538a-5db2-401e-a4a9-cb9b53f27f77 rw quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000083920fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000083921000-0x0000000083921fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000083922000-0x000000008394bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008394c000-0x000000008399cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008399d000-0x0000000083dddfff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000083dde000-0x0000000085de7fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000085de8000-0x0000000086843fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000086844000-0x0000000086aa4fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000086aa5000-0x000000008740efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008740f000-0x0000000087f80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000087f81000-0x0000000087ffdfff] type 20
[ 0.000000] BIOS-e820: [mem 0x0000000087ffe000-0x0000000087ffefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000088000000-0x00000000880fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000173ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ESRT=0x87ebfe18 ACPI=0x86dab000 ACPI 2.0=0x86dab000 SMBIOS=0x878d9000 SMBIOS 3.0=0x878d8000
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. UX305UA/UX305UA, BIOS UX305UA.201 10/12/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x174000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 2 base 0090000000 mask 7FF0000000 uncachable
[ 0.000000] 3 base 008C000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 008A000000 mask 7FFE000000 uncachable
[ 0.000000] 5 base 0089000000 mask 7FFF000000 uncachable
[ 0.000000] 6 base 0088800000 mask 7FFF800000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x87fff max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x0000000087ebfe18 to 0x0000000087ebfe50.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x22660000, 0x22660fff] PGTABLE
[ 0.000000] BRK [0x22661000, 0x22661fff] PGTABLE
[ 0.000000] BRK [0x22662000, 0x22662fff] PGTABLE
[ 0.000000] BRK [0x22663000, 0x22663fff] PGTABLE
[ 0.000000] BRK [0x22664000, 0x22664fff] PGTABLE
[ 0.000000] BRK [0x22665000, 0x22665fff] PGTABLE
[ 0.000000] BRK [0x22666000, 0x22666fff] PGTABLE
[ 0.000000] BRK [0x22667000, 0x22667fff] PGTABLE
[ 0.000000] BRK [0x22668000, 0x22668fff] PGTABLE
[ 0.000000] BRK [0x22669000, 0x22669fff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x36e31000-0x3770ffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x0000000086DAB000 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x0000000086DAB0A0 0000C4 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x0000000086DD0490 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x0000000086DAB1F8 025297 (v02 _ASUS_ Notebook 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x000000008740DF80 000040
[ 0.000000] ACPI: APIC 0x0000000086DD05A0 000084 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x0000000086DD0628 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x0000000086DD0670 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x0000000086DD0710 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x0000000086DD0750 000038 (v01 _ASUS_ Notebook 01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x0000000086DD0788 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: ECDT 0x0000000086DD0AA0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: LPIT 0x0000000086DD0B68 000094 (v01 INTEL SKL-ULT 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x0000000086DD0C00 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
[ 0.000000] ACPI: DBGP 0x0000000086DD0E48 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x0000000086DD0E80 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x0000000086DD0ED8 003DD1 (v02 DptfTa DptfTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x0000000086DD4CB0 005843 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x0000000086DDA4F8 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x0000000086DDA540 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: BGRT 0x0000000086DDB398 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DMAR 0x0000000086DDB3D0 0000F0 (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.000000] ACPI: TPM2 0x0000000086DDB4C0 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.000000] ACPI: MSDM 0x0000000086605F18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000173ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x173ffa000-0x173ffdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000173ffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000083920fff]
[ 0.000000] node 0: [mem 0x000000008394c000-0x000000008399cfff]
[ 0.000000] node 0: [mem 0x0000000083dde000-0x0000000085de7fff]
[ 0.000000] node 0: [mem 0x0000000086844000-0x0000000086aa4fff]
[ 0.000000] node 0: [mem 0x0000000087ffe000-0x0000000087ffefff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000173ffffff]
[ 0.000000] Reserved but unavailable: 9350 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000173ffffff]
[ 0.000000] On node 0 totalpages: 1022842
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8496 pages used for memmap
[ 0.000000] DMA32 zone: 543710 pages, LIFO batch:31
[ 0.000000] Normal zone: 7424 pages used for memmap
[ 0.000000] Normal zone: 475136 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at [mem 0x89000000-0x8affffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x83921000-0x83921fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x83922000-0x8394bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8399d000-0x83dddfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x85de8000-0x86843fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x86aa5000-0x8740efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8740f000-0x87f80fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x87f81000-0x87ffdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x87fff000-0x87ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88000000-0x880fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x88100000-0x88ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x89000000-0x8affffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8b000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x8b000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1006836
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=30c9538a-5db2-401e-a4a9-cb9b53f27f77 rw quiet
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3888048K/4091368K available (10252K kernel code, 1290K rwdata, 3488K rodata, 1476K init, 608K bss, 203320K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 32655 entries in 128 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 20736, nr_irqs: 1024, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: (none).
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180313
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.003333] APIC: Switch to symmetric I/O mode setup
[ 0.003333] DMAR: Host address width 39
[ 0.003333] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.003333] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[ 0.003333] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.003333] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.003333] DMAR: RMRR base: 0x000000865e5000 end: 0x00000086604fff
[ 0.003333] DMAR: RMRR base: 0x00000088800000 end: 0x0000008affffff
[ 0.003333] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.003333] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.003333] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.003333] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.003333] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.003333] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.003333] DMAR: DRHD: handling fault status reg 2
[ 0.003333] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 9 [fault reason 37] Blocked a compatibility format interrupt request
[ 0.003333] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.003333] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.006666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.023333] tsc: Detected 2400.000 MHz processor
[ 0.023333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns
[ 0.023333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4801.00 BogoMIPS (lpj=8000000)
[ 0.023333] pid_max: default: 32768 minimum: 301
[ 0.023333] Security Framework initialized
[ 0.023333] Yama: becoming mindful.
[ 0.023333] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.023333] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.023333] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.023333] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.023333] CPU: Physical Processor ID: 0
[ 0.023333] CPU: Processor Core ID: 0
[ 0.023333] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.023333] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.023333] mce: CPU supports 8 MCE banks
[ 0.023333] CPU0: Thermal monitoring enabled (TM1)
[ 0.023333] process: using mwait in idle threads
[ 0.023333] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.023333] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.023333] Spectre V2 : Mitigation: Full generic retpoline
[ 0.023333] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[ 0.023333] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.023333] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.023333] Speculative Store Bypass: Vulnerable
[ 0.023333] Freeing SMP alternatives memory: 28K
[ 0.027630] TSC deadline timer enabled
[ 0.027635] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[ 0.043368] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.043532] ... version: 4
[ 0.043532] ... bit width: 48
[ 0.043533] ... generic registers: 4
[ 0.043533] ... value mask: 0000ffffffffffff
[ 0.043534] ... max period: 00007fffffffffff
[ 0.043534] ... fixed-purpose events: 3
[ 0.043535] ... event mask: 000000070000000f
[ 0.046698] Hierarchical SRCU implementation.
[ 0.056951] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.060045] smp: Bringing up secondary CPUs ...
[ 0.083391] x86: Booting SMP configuration:
[ 0.083397] .... node #0, CPUs: #1 #2 #3
[ 0.130535] smp: Brought up 1 node, 4 CPUs
[ 0.130535] smpboot: Max logical packages: 1
[ 0.130535] smpboot: Total of 4 processors activated (19207.00 BogoMIPS)
[ 0.133580] devtmpfs: initialized
[ 0.133580] x86/mm: Memory block size: 128MB
[ 0.133708] PM: Registering ACPI NVS region [mem 0x83921000-0x83921fff] (4096 bytes)
[ 0.133708] PM: Registering ACPI NVS region [mem 0x86aa5000-0x8740efff] (9871360 bytes)
[ 0.133708] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.133708] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.133708] pinctrl core: initialized pinctrl subsystem
[ 0.133708] RTC time: 12:31:47, date: 07/27/18
[ 0.133708] NET: Registered protocol family 16
[ 0.133799] cpuidle: using governor ladder
[ 0.133799] cpuidle: using governor menu
[ 0.133799] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.133799] ACPI: bus type PCI registered
[ 0.133799] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.133799] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.133799] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.133799] PCI: Using configuration type 1 for base access
[ 0.134085] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.134085] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.134085] ACPI: Added _OSI(Module Device)
[ 0.134085] ACPI: Added _OSI(Processor Device)
[ 0.134085] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.134085] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.134085] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.134085] ACPI: EC: EC started
[ 0.134085] ACPI: EC: interrupt blocked
[ 0.134085] ACPI: \: Used as first EC
[ 0.134085] ACPI: \: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.134085] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.178433] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.183950] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.193327] ACPI: Dynamic OEM Table Load:
[ 0.193333] ACPI: SSDT 0xFFFF910FAE7EF000 00061E (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.193946] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.195697] ACPI: Dynamic OEM Table Load:
[ 0.195701] ACPI: SSDT 0xFFFF910FAE1D6400 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.196214] ACPI: Dynamic OEM Table Load:
[ 0.196217] ACPI: SSDT 0xFFFF910FAE7E59C0 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20120913)
[ 0.196603] ACPI: Dynamic OEM Table Load:
[ 0.196606] ACPI: SSDT 0xFFFF910FAE1E0800 000130 (v02 PmRef HwpLvt 00003000 INTL 20120913)
[ 0.197802] ACPI: Dynamic OEM Table Load:
[ 0.197807] ACPI: SSDT 0xFFFF910FAE7ED800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.198613] ACPI: Dynamic OEM Table Load:
[ 0.198616] ACPI: SSDT 0xFFFF910FAE1E0200 000119 (v02 PmRef ApHwp 00003000 INTL 20120913)
[ 0.199089] ACPI: Dynamic OEM Table Load:
[ 0.199092] ACPI: SSDT 0xFFFF910FAE1E1C00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.201915] ACPI: Interpreter enabled
[ 0.201953] ACPI: (supports S0 S3 S4 S5)
[ 0.201954] ACPI: Using IOAPIC for interrupt routing
[ 0.201991] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.202835] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.205980] ACPI: Power Resource [WRST] (off)
[ 0.206165] ACPI: Power Resource [WRST] (off)
[ 0.206346] ACPI: Power Resource [WRST] (off)
[ 0.206528] ACPI: Power Resource [WRST] (off)
[ 0.206713] ACPI: Power Resource [WRST] (off)
[ 0.206897] ACPI: Power Resource [WRST] (off)
[ 0.207076] ACPI: Power Resource [WRST] (off)
[ 0.207254] ACPI: Power Resource [WRST] (off)
[ 0.207433] ACPI: Power Resource [WRST] (off)
[ 0.207613] ACPI: Power Resource [WRST] (off)
[ 0.208079] ACPI: Power Resource [WRST] (off)
[ 0.208288] ACPI: Power Resource [WRST] (off)
[ 0.208467] ACPI: Power Resource [WRST] (off)
[ 0.208645] ACPI: Power Resource [WRST] (off)
[ 0.208824] ACPI: Power Resource [WRST] (off)
[ 0.209004] ACPI: Power Resource [WRST] (off)
[ 0.209185] ACPI: Power Resource [WRST] (off)
[ 0.209367] ACPI: Power Resource [WRST] (off)
[ 0.209549] ACPI: Power Resource [WRST] (off)
[ 0.209728] ACPI: Power Resource [WRST] (off)
[ 0.222146] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.222153] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.224018] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.224019] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.224760] PCI host bridge to bus 0000:00
[ 0.224762] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.224763] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.224764] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.224766] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.224767] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.224768] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.224769] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.224770] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.224771] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.224772] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.224773] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.224775] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.224776] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.224777] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.224778] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.224779] pci_bus 0000:00: root bus resource [mem 0x8b000000-0xdfffffff window]
[ 0.224780] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.224782] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.224791] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[ 0.224934] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[ 0.224944] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
[ 0.224949] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.224953] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.224967] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.225106] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.225118] pci 0000:00:04.0: reg 0x10: [mem 0xdfb20000-0xdfb27fff 64bit]
[ 0.225343] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.225366] pci 0000:00:14.0: reg 0x10: [mem 0xdfb10000-0xdfb1ffff 64bit]
[ 0.225439] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.225596] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.225618] pci 0000:00:14.2: reg 0x10: [mem 0xdfb38000-0xdfb38fff 64bit]
[ 0.225889] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 0.226153] pci 0000:00:15.0: reg 0x10: [mem 0xdfb37000-0xdfb37fff 64bit]
[ 0.227205] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[ 0.227468] pci 0000:00:15.1: reg 0x10: [mem 0xdfb36000-0xdfb36fff 64bit]
[ 0.228460] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.228487] pci 0000:00:16.0: reg 0x10: [mem 0xdfb35000-0xdfb35fff 64bit]
[ 0.228568] pci 0000:00:16.0: PME# supported from D3hot
[ 0.228735] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.228754] pci 0000:00:17.0: reg 0x10: [mem 0xdfb30000-0xdfb31fff]
[ 0.228762] pci 0000:00:17.0: reg 0x14: [mem 0xdfb34000-0xdfb340ff]
[ 0.228770] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.228778] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.228786] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.228793] pci 0000:00:17.0: reg 0x24: [mem 0xdfb33000-0xdfb337ff]
[ 0.228840] pci 0000:00:17.0: PME# supported from D3hot
[ 0.229006] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.229087] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.229296] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[ 0.229385] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.229595] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[ 0.229856] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.229873] pci 0000:00:1f.2: reg 0x10: [mem 0xdfb2c000-0xdfb2ffff]
[ 0.230079] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
[ 0.230109] pci 0000:00:1f.3: reg 0x10: [mem 0xdfb28000-0xdfb2bfff 64bit]
[ 0.230143] pci 0000:00:1f.3: reg 0x20: [mem 0xdfb00000-0xdfb0ffff 64bit]
[ 0.230199] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.230424] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.230485] pci 0000:00:1f.4: reg 0x10: [mem 0xdfb32000-0xdfb320ff 64bit]
[ 0.230556] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.230831] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.230834] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.230836] pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf9fffff]
[ 0.230841] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
[ 0.231175] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[ 0.231275] pci 0000:02:00.0: reg 0x10: [mem 0xdfa00000-0xdfa01fff 64bit]
[ 0.231566] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.232109] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.232113] pci 0000:00:1c.5: bridge window [mem 0xdfa00000-0xdfafffff]
[ 0.234623] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.234701] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.234777] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.234853] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.234929] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.235005] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.235081] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.235156] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.235919] ACPI: EC: interrupt unblocked
[ 0.235941] ACPI: EC: event unblocked
[ 0.235955] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.235956] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.236026] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.236026] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.236026] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.236026] vgaarb: loaded
[ 0.236026] pps_core: LinuxPPS API ver. 1 registered
[ 0.236026] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.236026] PTP clock support registered
[ 0.236026] EDAC MC: Ver: 3.0.0
[ 0.236026] Registered efivars operations
[ 0.239500] PCI: Using ACPI for IRQ routing
[ 0.264934] PCI: pci_cache_line_size set to 64 bytes
[ 0.265330] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.265332] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.265332] e820: reserve RAM buffer [mem 0x83921000-0x83ffffff]
[ 0.265334] e820: reserve RAM buffer [mem 0x8399d000-0x83ffffff]
[ 0.265334] e820: reserve RAM buffer [mem 0x85de8000-0x87ffffff]
[ 0.265336] e820: reserve RAM buffer [mem 0x86aa5000-0x87ffffff]
[ 0.265337] e820: reserve RAM buffer [mem 0x87fff000-0x87ffffff]
[ 0.266668] NetLabel: Initializing
[ 0.266668] NetLabel: domain hash size = 128
[ 0.266668] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.266668] NetLabel: unlabeled traffic allowed by default
[ 0.267024] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.267029] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.271037] clocksource: Switched to clocksource tsc-early
[ 0.279350] VFS: Disk quotas dquot_6.6.0
[ 0.279364] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.279420] pnp: PnP ACPI init
[ 0.279788] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.279790] system 00:00: [io 0xffff] has been reserved
[ 0.279791] system 00:00: [io 0xffff] has been reserved
[ 0.279792] system 00:00: [io 0xffff] has been reserved
[ 0.279794] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.279795] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.279799] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279900] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.279936] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.279939] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.280076] system 00:03: [io 0x0240-0x0259] has been reserved
[ 0.280079] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.280152] pnp 00:04: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.280344] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.280346] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.280347] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.280349] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.280350] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.280352] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.280353] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.280355] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.280356] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.280358] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.280361] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.280401] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.280402] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.280404] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.280405] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.280407] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.280408] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.280409] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.280412] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.280736] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.280739] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.282063] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.282065] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.282066] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.282069] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.283131] pnp: PnP ACPI: found 9 devices
[ 0.288710] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.288733] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.288740] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.288744] pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf9fffff]
[ 0.288747] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
[ 0.288751] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.288757] pci 0000:00:1c.5: bridge window [mem 0xdfa00000-0xdfafffff]
[ 0.288763] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.288765] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.288766] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.288767] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.288768] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.288770] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.288771] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.288772] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.288773] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.288774] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.288776] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.288777] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.288778] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.288779] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.288780] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.288781] pci_bus 0000:00: resource 19 [mem 0x8b000000-0xdfffffff window]
[ 0.288783] pci_bus 0000:00: resource 20 [mem 0xfd000000-0xfe7fffff window]
[ 0.288784] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.288785] pci_bus 0000:01: resource 1 [mem 0xdf000000-0xdf9fffff]
[ 0.288786] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd09fffff 64bit pref]
[ 0.288788] pci_bus 0000:02: resource 1 [mem 0xdfa00000-0xdfafffff]
[ 0.288944] NET: Registered protocol family 2
[ 0.289051] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.289065] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.289114] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.289177] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.289199] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.289209] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.289242] NET: Registered protocol family 1
[ 0.289254] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.289713] PCI: CLS 0 bytes, default 64
[ 0.289740] Unpacking initramfs...
[ 0.391006] Freeing initrd memory: 9084K
[ 0.391047] DMAR: ACPI device "device:6a" under DMAR at fed91000 as 00:15.0
[ 0.391050] DMAR: ACPI device "device:6b" under DMAR at fed91000 as 00:15.1
[ 0.391064] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.391066] software IO TLB [mem 0x7e936000-0x82936000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 0.391088] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns
[ 0.391105] clocksource: Switched to clocksource tsc
[ 0.391184] Scanning for low memory corruption every 60 seconds
[ 0.391647] Initialise system trusted keyrings
[ 0.391654] Key type blacklist registered
[ 0.391689] workingset: timestamp_bits=41 max_order=20 bucket_order=0
[ 0.392679] zbud: loaded
[ 0.392947] pstore: using lz4hc compression
[ 0.393996] Key type asymmetric registered
[ 0.393997] Asymmetric key parser 'x509' registered
[ 0.394028] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.394064] io scheduler noop registered
[ 0.394065] io scheduler deadline registered
[ 0.394098] io scheduler cfq registered (default)
[ 0.394098] io scheduler mq-deadline registered
[ 0.394099] io scheduler kyber registered
[ 0.394104] io scheduler bfq registered
[ 0.394782] pcieport 0000:00:1c.0: AER enabled with IRQ 122
[ 0.394806] pcieport 0000:00:1c.5: AER enabled with IRQ 123
[ 0.394821] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[ 0.394833] pcieport 0000:00:1c.5: Signaling PME with IRQ 123
[ 0.394861] pciehp 0000:00:1c.0:pcie004: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.394926] efifb: probing for efifb
[ 0.394938] efifb: framebuffer at 0xc0000000, using 8128k, total 8128k
[ 0.394939] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.394940] efifb: scrolling: redraw
[ 0.394941] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.398355] Console: switching to colour frame buffer device 240x67
[ 0.401693] fb0: EFI VGA frame buffer device
[ 0.401700] intel_idle: MWAIT substates: 0x11142120
[ 0.401700] intel_idle: v0.4.1 model 0x4E
[ 0.401888] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.401956] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.401961] ACPI: Lid Switch [LID]
[ 0.401986] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.401995] ACPI: Sleep Button [SLPB]
[ 0.402020] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.402024] ACPI: Power Button [PWRF]
[ 0.403832] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.403833] ACPI: Thermal Zone [THRM] (53 C)
[ 0.404001] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.404827] intel_pstate: Intel P-state driver initializing
[ 0.404934] intel_pstate: HWP enabled
[ 0.404982] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.405011] intel_pmc_core: initialized
[ 0.405199] NET: Registered protocol family 10
[ 0.408153] Segment Routing with IPv6
[ 0.408173] NET: Registered protocol family 17
[ 0.408433] RAS: Correctable Errors collector initialized.
[ 0.408462] microcode: sig=0x406e3, pf=0x80, revision=0xc2
[ 0.408608] microcode: Microcode Update Driver: v2.2.
[ 0.408632] sched_clock: Marking stable (408605173, 0)->(389668736, 18936437)
[ 0.408883] registered taskstats version 1
[ 0.408889] Loading compiled-in X.509 certificates
[ 0.408902] zswap: loaded using pool lzo/zbud
[ 0.411237] Key type big_key registered
[ 0.412183] Magic number: 10:784:532
[ 0.412219] acpi LNXPOWER:12: hash matches
[ 0.412237] hctosys: unable to open rtc device (rtc0)
[ 0.413609] Freeing unused kernel memory: 1476K
[ 0.413611] Write protecting the kernel read-only data: 16384k
[ 0.414108] Freeing unused kernel memory: 2016K
[ 0.415074] Freeing unused kernel memory: 608K
[ 0.482238] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[ 0.482239] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.483876] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.490519] ACPI: bus type USB registered
[ 0.490543] usbcore: registered new interface driver usbfs
[ 0.490553] usbcore: registered new interface driver hub
[ 0.490577] usbcore: registered new device driver usb
[ 0.493759] SCSI subsystem initialized
[ 0.497640] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.497647] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.498254] libata version 3.00 loaded.
[ 0.498785] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 0.498796] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.499125] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[ 0.499127] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.499129] usb usb1: Product: xHCI Host Controller
[ 0.499173] usb usb1: Manufacturer: Linux 4.17.8-1-ARCH xhci-hcd
[ 0.499175] usb usb1: SerialNumber: 0000:00:14.0
[ 0.499313] hub 1-0:1.0: USB hub found
[ 0.499335] hub 1-0:1.0: 12 ports detected
[ 0.500730] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.500735] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.500738] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.500780] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
[ 0.500782] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.500783] usb usb2: Product: xHCI Host Controller
[ 0.500784] usb usb2: Manufacturer: Linux 4.17.8-1-ARCH xhci-hcd
[ 0.500785] usb usb2: SerialNumber: 0000:00:14.0
[ 0.500872] hub 2-0:1.0: USB hub found
[ 0.500888] hub 2-0:1.0: 6 ports detected
[ 0.501424] ahci 0000:00:17.0: version 3.0
[ 0.502037] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 0.502041] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.502484] scsi host0: ahci
[ 0.502612] scsi host1: ahci
[ 0.502663] ata1: SATA max UDMA/133 abar m2048@0xdfb33000 port 0xdfb33100 irq 125
[ 0.502665] ata2: SATA max UDMA/133 abar m2048@0xdfb33000 port 0xdfb33180 irq 125
[ 0.540711] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.814500] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.814536] ata2: SATA link down (SStatus 4 SControl 300)
[ 0.816191] ata1.00: ATA-9: SAMSUNG MZNLF128HCHP-00004, FXT2301Q, max UDMA/133
[ 0.816198] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.817479] ata1.00: configured for UDMA/133
[ 0.828705] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZNLF128 301Q PQ: 0 ANSI: 5
[ 0.830709] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 0.835303] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 0.835335] sd 0:0:0:0: [sda] Write Protect is off
[ 0.835340] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.835447] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.838336] sda: sda1 sda2 sda3
[ 0.839528] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.969627] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 0.975692] usb 1-1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.01
[ 0.975695] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 0.975696] usb 1-1: Product: USB Receiver
[ 0.975714] usb 1-1: Manufacturer: Logitech
[ 0.983202] random: fast init done
[ 1.100123] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.117277] usb 2-2: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[ 1.117285] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.117291] usb 2-2: Product: USB 10/100/1000 LAN
[ 1.117295] usb 2-2: Manufacturer: Realtek
[ 1.117300] usb 2-2: SerialNumber: 9CEBE837D02D
[ 1.126135] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 1.140901] systemd[1]: Detected architecture x86-64.
[ 1.149847] systemd[1]: Set hostname to <cuddles>.
[ 1.204611] systemd-fstab-generator[196]: Failed to create unit file /run/systemd/generator/-.mount, as it already exists. Duplicate entry in /etc/fstab?
[ 1.205529] systemd-fstab-generator[196]: Failed to create unit file /run/systemd/generator/dev-disk-by\x2duuid-a757fdbb\x2d21c7\x2d480a\x2db52a\x2df8a4651148bf.swap, as it already exists. Duplicate entry in /etc/fstab?
[ 1.205928] systemd[192]: /usr/lib/systemd/system-generators/systemd-fstab-generator failed with exit status 1.
[ 1.240016] usb 1-3: new low-speed USB device number 3 using xhci_hcd
[ 1.254474] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.254538] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.254596] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.254734] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.254744] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.256853] systemd[1]: Listening on Process Core Dump Socket.
[ 1.256893] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.256903] systemd[1]: Reached target Remote File Systems.
[ 1.263012] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.282148] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[ 1.284792] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[ 1.338134] systemd-journald[208]: Received request to flush runtime journal from PID 1
[ 1.389011] usb 1-3: New USB device found, idVendor=046d, idProduct=c312, bcdDevice= 1.00
[ 1.389018] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.389023] usb 1-3: Product: USB Multimedia Keyboard
[ 1.389027] usb 1-3: Manufacturer: BTC
[ 1.513479] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 1.703706] usb 1-5: New USB device found, idVendor=04f2, idProduct=b56b, bcdDevice= 0.09
[ 1.703713] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.703717] usb 1-5: Product: USB2.0 HD UVC WebCam
[ 1.703721] usb 1-5: Manufacturer: Chicony Electronics Co.,Ltd.
[ 1.703725] usb 1-5: SerialNumber: 0x0001
[ 1.830061] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[ 1.880274] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input4
[ 1.886694] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 1.910648] Linux agpgart interface v0.103
[ 1.911466] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 1.923701] ACPI: Battery Slot [BAT0] (battery present)
[ 1.923925] ACPI: AC Adapter [AC0] (off-line)
[ 1.943405] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 1.943943] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 1.952001] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 1.954513] rtc_cmos 00:01: RTC can wake from S4
[ 1.955020] rtc_cmos 00:01: registered as rtc0
[ 1.955047] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.971380] usb 1-8: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[ 1.971383] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.993503] elan_i2c i2c-ELAN0100:00: i2c-ELAN0100:00 supply vcc not found, using dummy regulator
[ 1.994759] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.994841] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 1.994923] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 1.999456] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.001246] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 2.001282] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 2.011778] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 2.028697] usbcore: registered new interface driver usbhid
[ 2.028699] usbhid: USB HID core driver
[ 2.029908] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 2.029910] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.029911] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.029911] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.029912] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 2.029913] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 2.030056] usbcore: registered new interface driver r8152
[ 2.050821] cryptd: max_cpu_qlen set to 1000
[ 2.053654] usbcore: registered new interface driver cdc_ether
[ 2.062663] AVX2 version of gcm_enc/dec engaged.
[ 2.062664] AES CTR mode by8 optimization enabled
[ 2.073629] Adding 8388604k swap on /dev/sda2. Priority:-2 extents:1 across:8388604k SSFS
[ 2.094047] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.097599] media: Linux media interface: v0.10
[ 2.104693] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.105184] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 2.105187] cfg80211: failed to load regulatory.db
[ 2.129952] Linux video capture interface: v2.00
[ 2.143688] Intel(R) Wireless WiFi driver for Linux
[ 2.143689] Copyright(c) 2003- 2015 Intel Corporation
[ 2.153691] usb 2-2: reset SuperSpeed USB device number 2 using xhci_hcd
[ 2.200399] iwlwifi 0000:02:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
[ 2.204014] r8152 2-2:1.0 eth0: v1.09.9
[ 2.216184] iTCO_vendor_support: vendor-support=0
[ 2.217428] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.217596] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 2.217730] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.219537] asus_wmi: ASUS WMI generic driver loaded
[ 2.220626] asus_wmi: Initialization: 0x1
[ 2.220698] asus_wmi: BIOS WMI version: 7.9
[ 2.220804] asus_wmi: SFUN value: 0xa2077
[ 2.223268] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input6
[ 2.225346] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C312.0004/input/input7
[ 2.233115] asus_wmi: Number of fans: 1
[ 2.244849] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 2.260017] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b56b)
[ 2.276169] uvcvideo 1-5:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
[ 2.276173] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[ 2.276175] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[ 2.276177] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[ 2.279674] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input8
[ 2.285450] hid-generic 0003:046D:C312.0004: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:14.0-3/input0
[ 2.285631] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C312.0005/input/input9
[ 2.318477] elan_i2c i2c-ELAN0100:00: Elan Touchpad: Module ID: 0x0005, Firmware: 0x0004, Sample: 0x000d, IAP: 0x000e
[ 2.323457] input: Elan Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-ELAN0100:00/input/input10
[ 2.340086] checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
[ 2.340088] fb: switching to inteldrmfb from EFI VGA
[ 2.340113] Console: switching to colour dummy device 80x25
[ 2.340216] [drm] Replacing VGA console driver
[ 2.340249] hid-generic 0003:046D:C312.0005: input,hiddev0,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:14.0-3/input1
[ 2.341230] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.341231] [drm] Driver supports precise vblank timestamp query.
[ 2.341772] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.343438] usbcore: registered new interface driver uvcvideo
[ 2.343439] USB Video Class driver (1.1.1)
[ 2.345034] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
[ 2.350847] logitech-djreceiver 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input2
[ 2.362342] r8152 2-2:1.0 enp0s20f0u2: renamed from eth0
[ 2.363811] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[ 2.363813] Bluetooth: Core ver 2.22
[ 2.363828] NET: Registered protocol family 31
[ 2.363829] Bluetooth: HCI device and connection manager initialized
[ 2.363833] Bluetooth: HCI socket layer initialized
[ 2.363835] Bluetooth: L2CAP socket layer initialized
[ 2.363841] Bluetooth: SCO socket layer initialized
[ 2.372322] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
[ 2.375266] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.380268] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 2.380445] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.385074] iwlwifi 0000:02:00.0: base HW address: 00:21:5c:fb:49:d3
[ 2.410551] mousedev: PS/2 mouse device common for all mice
[ 2.415003] fbcon: inteldrmfb (fb0) is primary device
[ 2.416842] random: crng init done
[ 2.416843] random: 7 urandom warning(s) missed due to ratelimiting
[ 2.419156] usbcore: registered new interface driver btusb
[ 2.441775] Bluetooth: hci0: read Intel version: 370810011003110e32
[ 2.441776] Bluetooth: hci0: Intel device is already patched. patch num: 32
[ 2.456471] intel_rapl: Found RAPL domain package
[ 2.456472] intel_rapl: Found RAPL domain core
[ 2.456474] intel_rapl: Found RAPL domain uncore
[ 2.456475] intel_rapl: Found RAPL domain dram
[ 2.457801] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 2.458534] thermal thermal_zone9: failed to read out thermal zone (-61)
[ 2.462015] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 2.466064] input: Logitech Unifying Device. Wireless PID:402d as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:402D.0006/input/input12
[ 2.466246] hid-generic 0003:046D:402D.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:402d] on usb-0000:00:14.0-1:1
[ 2.468066] input: Logitech Unifying Device. Wireless PID:4003 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:4003.0007/input/input13
[ 2.468250] hid-generic 0003:046D:4003.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4003] on usb-0000:00:14.0-1:2
[ 2.604166] logitech-hidpp-device 0003:046D:402D.0006: hidraw3: USB HID v1.11 Keyboard [Logitech M560] on usb-0000:00:14.0-1:1
[ 2.754234] input: Logitech K270 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:4003.0007/input/input14
[ 2.754717] logitech-hidpp-device 0003:046D:4003.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K270] on usb-0000:00:14.0-1:2
[ 3.861447] Console: switching to colour frame buffer device 240x67
[ 3.884554] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.918426] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.918429] Bluetooth: BNEP filters: protocol multicast
[ 3.918434] Bluetooth: BNEP socket layer initialized
[ 3.936032] snd_hda_codec_conexant hdaudioC0D0: CX20751/2: BIOS auto-probing.
[ 3.936448] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 3.936451] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.936454] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 3.936456] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 3.936457] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 3.936459] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a
[ 3.936462] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19
[ 3.937568] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 3.960190] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[ 3.961179] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 3.961293] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[ 3.961379] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 3.961502] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 3.961600] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 4.192289] IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u2: link is not ready
[ 4.197034] IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u2: link is not ready
[ 4.204431] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 4.228998] r8152 2-2:1.0 enp0s20f0u2: carrier on
[ 4.319804] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 4.319827] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20f0u2: link becomes ready
[ 4.435181] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 8.096097] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 8.872458] Bluetooth: RFCOMM TTY layer initialized
[ 8.872467] Bluetooth: RFCOMM socket layer initialized
[ 8.872476] Bluetooth: RFCOMM ver 1.11
[ 8.992295] wlp2s0: authenticate with a4:18:75:9a:d7:e0
[ 8.997331] wlp2s0: send auth to a4:18:75:9a:d7:e0 (try 1/3)
[ 9.002824] wlp2s0: authenticated
[ 9.006694] wlp2s0: associate with a4:18:75:9a:d7:e0 (try 1/3)
[ 9.015629] wlp2s0: RX AssocResp from a4:18:75:9a:d7:e0 (capab=0x431 status=0 aid=39)
[ 9.021387] wlp2s0: associated
[ 9.042495] wlp2s0: Limiting TX power to 11 dBm as advertised by a4:18:75:9a:d7:e0
[ 9.183796] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 15.352310] wlp2s0: authenticate with a4:18:75:79:b5:50
[ 15.359023] wlp2s0: send auth to a4:18:75:79:b5:50 (try 1/3)
[ 15.373396] wlp2s0: authenticated
[ 15.377256] wlp2s0: associate with a4:18:75:79:b5:50 (try 1/3)
[ 15.534469] wlp2s0: RX AssocResp from a4:18:75:79:b5:50 (capab=0x431 status=0 aid=197)
[ 15.541890] wlp2s0: associated
[ 15.717877] wlp2s0: Limiting TX power to 14 dBm as advertised by a4:18:75:79:b5:50
[ 47.275590] wlp2s0: disconnect from AP a4:18:75:79:b5:50 for new auth to a4:18:75:9a:d7:e0
[ 47.289783] wlp2s0: authenticate with a4:18:75:9a:d7:e0
[ 47.297832] wlp2s0: send auth to a4:18:75:9a:d7:e0 (try 1/3)
[ 47.305469] wlp2s0: authenticated
[ 47.306705] wlp2s0: associate with a4:18:75:9a:d7:e0 (try 1/3)
[ 47.313291] wlp2s0: RX ReassocResp from a4:18:75:9a:d7:e0 (capab=0x431 status=0 aid=39)
[ 47.322593] wlp2s0: associated
[ 47.373142] wlp2s0: Limiting TX power to 11 dBm as advertised by a4:18:75:9a:d7:e0
[ 79.714786] wlp2s0: authenticate with 5c:50:15:c9:ac:90
[ 79.720421] wlp2s0: send auth to 5c:50:15:c9:ac:90 (try 1/3)
[ 79.736826] wlp2s0: authenticated
[ 79.737595] wlp2s0: associate with 5c:50:15:c9:ac:90 (try 1/3)
[ 79.746306] wlp2s0: RX AssocResp from 5c:50:15:c9:ac:90 (capab=0x431 status=0 aid=1)
[ 79.748972] wlp2s0: associated
[ 79.785034] wlp2s0: Limiting TX power to 5 dBm as advertised by 5c:50:15:c9:ac:90
[ 106.538131] wlp2s0: disconnect from AP 5c:50:15:c9:ac:90 for new auth to a4:18:75:9a:d7:e0
[ 106.547555] wlp2s0: authenticate with a4:18:75:9a:d7:e0
[ 106.554985] wlp2s0: send auth to a4:18:75:9a:d7:e0 (try 1/3)
[ 106.559224] wlp2s0: authenticated
[ 106.564825] wlp2s0: associate with a4:18:75:9a:d7:e0 (try 1/3)
[ 106.573314] wlp2s0: RX ReassocResp from a4:18:75:9a:d7:e0 (capab=0x431 status=0 aid=39)
[ 106.581798] wlp2s0: associated
[ 106.600128] wlp2s0: Limiting TX power to 11 dBm as advertised by a4:18:75:9a:d7:e0
[ 119.349567] wlp2s0: authenticate with 5c:50:15:c9:ac:90
[ 119.356645] wlp2s0: send auth to 5c:50:15:c9:ac:90 (try 1/3)
[ 119.385477] wlp2s0: authenticated
[ 119.388311] wlp2s0: associate with 5c:50:15:c9:ac:90 (try 1/3)
[ 119.398315] wlp2s0: RX AssocResp from 5c:50:15:c9:ac:90 (capab=0x431 status=0 aid=1)
[ 119.402796] wlp2s0: associated
[ 119.475986] wlp2s0: Limiting TX power to 5 dBm as advertised by 5c:50:15:c9:ac:90
[ 141.086160] wlp2s0: disconnect from AP 5c:50:15:c9:ac:90 for new auth to a4:18:75:9a:d7:e0
[ 141.104865] wlp2s0: authenticate with a4:18:75:9a:d7:e0
[ 141.111380] wlp2s0: send auth to a4:18:75:9a:d7:e0 (try 1/3)
[ 141.125535] wlp2s0: authenticated
[ 141.129677] wlp2s0: associate with a4:18:75:9a:d7:e0 (try 1/3)
[ 141.135783] wlp2s0: RX ReassocResp from a4:18:75:9a:d7:e0 (capab=0x431 status=0 aid=39)
[ 141.144471] wlp2s0: associated
[ 141.176417] wlp2s0: Limiting TX power to 11 dBm as advertised by a4:18:75:9a:d7:e0Last edited by WalterSmuts (2018-07-27 12:37:53)
Offline
Check the journal for the kernel messages from a boot when the device was not detected for comparison.
Edit:
`journalctl -b -1 -k -o cat` for example
Last edited by loqs (2018-07-27 12:46:13)
Offline
Mmm... Every time I reboot now it seems to work regardless of whether boot with it inserted while booting or not.
Well my problem seems to be solved!
For extra curiosity:
Does it perhaps flag the driver as a possible driver to use in the future the first time it boots with it and then always loads it on the successive boots or did I just do something wrong the first time?
Offline
For extra curiosity:
Does it perhaps flag the driver as a possible driver to use in the future the first time it boots with it and then always loads it on the successive boots or did I just do something wrong the first time?
No there is no such flagging system.
Offline
Pages: 1