You are not logged in.

#1 2018-08-18 11:36:36

ComeTOValhllaWithMe
Member
Registered: 2018-08-17
Posts: 23

Unable to use trackpad on asus fx504

On my fresh arch install on new machine I'm not able to use trackpad.
Output of

libinput list-devices
Device:           Power Button
Kernel:           /dev/input/event3
Group:            1
Seat:             seat0, default
Capabilities:     keyboard 
Tap-to-click:     n/a
Tap-and-drag:     n/a
Tap drag lock:    n/a
Left-handed:      n/a
Nat.scrolling:    n/a
Middle emulation: n/a
Calibration:      n/a
Scroll methods:   none
Click methods:    none
Disable-w-typing: n/a
Accel profiles:   n/a
Rotation:         n/a

Device:           Asus Wireless Radio Control
Kernel:           /dev/input/event5
Group:            2
Seat:             seat0, default
Capabilities:     keyboard 
Tap-to-click:     n/a
Tap-and-drag:     n/a
Tap drag lock:    n/a
Left-handed:      n/a
Nat.scrolling:    n/a
Middle emulation: n/a
Calibration:      n/a
Scroll methods:   none
Click methods:    none
Disable-w-typing: n/a
Accel profiles:   n/a
Rotation:         n/a

Device:           Video Bus
Kernel:           /dev/input/event10
Group:            3
Seat:             seat0, default
Capabilities:     keyboard 
Tap-to-click:     n/a
Tap-and-drag:     n/a
Tap drag lock:    n/a
Left-handed:      n/a
Nat.scrolling:    n/a
Middle emulation: n/a
Calibration:      n/a
Scroll methods:   none
Click methods:    none
Disable-w-typing: n/a
Accel profiles:   n/a
Rotation:         n/a

Device:           Video Bus
Kernel:           /dev/input/event11
Group:            3
Seat:             seat0, default
Capabilities:     keyboard 
Tap-to-click:     n/a
Tap-and-drag:     n/a
Tap drag lock:    n/a
Left-handed:      n/a
Nat.scrolling:    n/a
Middle emulation: n/a
Calibration:      n/a
Scroll methods:   none
Click methods:    none
Disable-w-typing: n/a
Accel profiles:   n/a
Rotation:         n/a

Device:           Power Button
Kernel:           /dev/input/event1
Group:            4
Seat:             seat0, default
Capabilities:     keyboard 
Tap-to-click:     n/a
Tap-and-drag:     n/a
Tap drag lock:    n/a
Left-handed:      n/a
Nat.scrolling:    n/a
Middle emulation: n/a
Calibration:      n/a
Scroll methods:   none
Click methods:    none
Disable-w-typing: n/a
Accel profiles:   n/a
Rotation:         n/a

Device:           Lid Switch
Kernel:           /dev/input/event2
Group:            5
Seat:             seat0, default
Capabilities:     switch
Tap-to-click:     n/a
Tap-and-drag:     n/a
Tap drag lock:    n/a
Left-handed:      n/a
Nat.scrolling:    n/a
Middle emulation: n/a
Calibration:      n/a
Scroll methods:   none
Click methods:    none
Disable-w-typing: n/a
Accel profiles:   n/a
Rotation:         n/a

Device:           Sleep Button
Kernel:           /dev/input/event0
Group:            6
Seat:             seat0, default
Capabilities:     keyboard 
Tap-to-click:     n/a
Tap-and-drag:     n/a
Tap drag lock:    n/a
Left-handed:      n/a
Nat.scrolling:    n/a
Middle emulation: n/a
Calibration:      n/a
Scroll methods:   none
Click methods:    none
Disable-w-typing: n/a
Accel profiles:   n/a
Rotation:         n/a

Device:           PixArt USB Optical Mouse
Kernel:           /dev/input/event9
Group:            7
Seat:             seat0, default
Capabilities:     pointer 
Tap-to-click:     n/a
Tap-and-drag:     n/a
Tap drag lock:    n/a
Left-handed:      disabled
Nat.scrolling:    disabled
Middle emulation: disabled
Calibration:      n/a
Scroll methods:   button
Click methods:    none
Disable-w-typing: n/a
Accel profiles:   flat *adaptive
Rotation:         n/a

Device:           USB2.0 HD UVC WebCam: USB2.0 HD
Kernel:           /dev/input/event8
Group:            8
Seat:             seat0, default
Capabilities:     keyboard 
Tap-to-click:     n/a
Tap-and-drag:     n/a
Tap drag lock:    n/a
Left-handed:      n/a
Nat.scrolling:    n/a
Middle emulation: n/a
Calibration:      n/a
Scroll methods:   none
Click methods:    none
Disable-w-typing: n/a
Accel profiles:   n/a
Rotation:         n/a

Device:           HDA Intel PCH Front Headphone
Kernel:           /dev/input/event12
Group:            9
Seat:             seat0, default
Capabilities:     
Tap-to-click:     n/a
Tap-and-drag:     n/a
Tap drag lock:    n/a
Left-handed:      n/a
Nat.scrolling:    n/a
Middle emulation: n/a
Calibration:      n/a
Scroll methods:   none
Click methods:    none
Disable-w-typing: n/a
Accel profiles:   n/a
Rotation:         n/a

Device:           HDA Intel PCH HDMI/DP,pcm=3
Kernel:           /dev/input/event13
Group:            9
Seat:             seat0, default
Capabilities:     
Tap-to-click:     n/a
Tap-and-drag:     n/a
Tap drag lock:    n/a
Left-handed:      n/a
Nat.scrolling:    n/a
Middle emulation: n/a
Calibration:      n/a
Scroll methods:   none
Click methods:    none
Disable-w-typing: n/a
Accel profiles:   n/a
Rotation:         n/a

Device:           HDA Intel PCH HDMI/DP,pcm=7
Kernel:           /dev/input/event14
Group:            9
Seat:             seat0, default
Capabilities:     
Tap-to-click:     n/a
Tap-and-drag:     n/a
Tap drag lock:    n/a
Left-handed:      n/a
Nat.scrolling:    n/a
Middle emulation: n/a
Calibration:      n/a
Scroll methods:   none
Click methods:    none
Disable-w-typing: n/a
Accel profiles:   n/a
Rotation:         n/a

Device:           HDA Intel PCH HDMI/DP,pcm=8
Kernel:           /dev/input/event15
Group:            9
Seat:             seat0, default
Capabilities:     
Tap-to-click:     n/a
Tap-and-drag:     n/a
Tap drag lock:    n/a
Left-handed:      n/a
Nat.scrolling:    n/a
Middle emulation: n/a
Calibration:      n/a
Scroll methods:   none
Click methods:    none
Disable-w-typing: n/a
Accel profiles:   n/a
Rotation:         n/a

Device:           HDA Intel PCH HDMI/DP,pcm=9
Kernel:           /dev/input/event16
Group:            9
Seat:             seat0, default
Capabilities:     
Tap-to-click:     n/a
Tap-and-drag:     n/a
Tap drag lock:    n/a
Left-handed:      n/a
Nat.scrolling:    n/a
Middle emulation: n/a
Calibration:      n/a
Scroll methods:   none
Click methods:    none
Disable-w-typing: n/a
Accel profiles:   n/a
Rotation:         n/a

Device:           HDA Intel PCH HDMI/DP,pcm=10
Kernel:           /dev/input/event17
Group:            9
Seat:             seat0, default
Capabilities:     
Tap-to-click:     n/a
Tap-and-drag:     n/a
Tap drag lock:    n/a
Left-handed:      n/a
Nat.scrolling:    n/a
Middle emulation: n/a
Calibration:      n/a
Scroll methods:   none
Click methods:    none
Disable-w-typing: n/a
Accel profiles:   n/a
Rotation:         n/a

Device:           Asus WMI hotkeys
Kernel:           /dev/input/event7
Group:            10
Seat:             seat0, default
Capabilities:     keyboard 
Tap-to-click:     n/a
Tap-and-drag:     n/a
Tap drag lock:    n/a
Left-handed:      n/a
Nat.scrolling:    n/a
Middle emulation: n/a
Calibration:      n/a
Scroll methods:   none
Click methods:    none
Disable-w-typing: n/a
Accel profiles:   n/a
Rotation:         n/a

Device:           AT Translated Set 2 keyboard
Kernel:           /dev/input/event4
Group:            11
Seat:             seat0, default
Capabilities:     keyboard 
Tap-to-click:     n/a
Tap-and-drag:     n/a
Tap drag lock:    n/a
Left-handed:      n/a
Nat.scrolling:    n/a
Middle emulation: n/a
Calibration:      n/a
Scroll methods:   none
Click methods:    none
Disable-w-typing: n/a
Accel profiles:   n/a
Rotation:         n/a
libinput-gestures -d
libinput-gestures: session unknown+unknown on Linux-4.17.14-arch1-1-ARCH-x86_64-with-arch, python 3.7.0, libinput 1.11.3
Gestures configured in /etc/libinput-gestures.conf:
swipe up           _internal ws_up
swipe down         _internal ws_down
swipe left         xdotool key alt+Right
swipe right        xdotool key alt+Left
pinch in           xdotool key super+s
pinch out          xdotool key super+s
Could not determine touchpad device.

Offline

#2 2018-08-18 11:52:48

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Unable to use trackpad on asus fx504

What is the output of dmesg?

Offline

#3 2018-08-18 12:06:02

ComeTOValhllaWithMe
Member
Registered: 2018-08-17
Posts: 23

Re: Unable to use trackpad on asus fx504

➜  ~ dmesg | grep input   
[    0.712549] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.712587] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.712623] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.712669] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.065148] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    3.675605] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input5
[    3.913747] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    4.089563] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input7
[    4.106352] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:093A:2510.0001/input/input8
[    4.106407] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-1/input0
[    4.157240] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input9
[    4.476871] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    4.477003] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:01/input/input11
[    5.814563] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.872139] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    5.872214] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    5.872322] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    5.872421] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    5.872539] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    5.872611] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17

Offline

#4 2018-08-18 12:29:32

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Unable to use trackpad on asus fx504

Please post the full output of dmesg.

Offline

#5 2018-08-18 14:14:31

ComeTOValhllaWithMe
Member
Registered: 2018-08-17
Posts: 23

Re: Unable to use trackpad on asus fx504

➜  ~ dmesg 
[    0.000000] microcode: microcode updated early to revision 0x96, date = 2018-05-02
[    0.000000] Linux version 4.17.14-arch1-1-ARCH (builduser@heftig-2746) (gcc version 8.2.0 (GCC)) #1 SMP PREEMPT Thu Aug 9 11:56:50 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=09ec7c7b-5a14-4175-baf4-65969ce3995e rw quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000079048fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079049000-0x000000007a4dffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007a4e0000-0x000000007a55cfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007a55d000-0x000000007a648fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007a649000-0x000000007ac40fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007ac41000-0x000000007ad0dfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007ad0e000-0x000000007ad0efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ad0f000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027dffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.60 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0x7a4f9000  ACPI=0x7a4f9000  SMBIOS=0x7aa89000  SMBIOS 3.0=0x7aa88000  ESRT=0x77a10298  MEMATTR=0x757df018 
[    0.000000] SMBIOS 3.1.1 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. TUF GAMING FX504GD_FX80GD/FX504GD, BIOS FX504GD.312 07/13/2018
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x27e000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7FF0000000 write-combining
[    0.000000]   1 base 0000000000 mask 7F80000000 write-back
[    0.000000]   2 base 007B800000 mask 7FFF800000 uncachable
[    0.000000]   3 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   4 base 0100000000 mask 7F00000000 write-back
[    0.000000]   5 base 0200000000 mask 7F80000000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x7ad0f max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x0000000077a10298 to 0x0000000077a102d0.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x109662000, 0x109662fff] PGTABLE
[    0.000000] BRK [0x109663000, 0x109663fff] PGTABLE
[    0.000000] BRK [0x109664000, 0x109664fff] PGTABLE
[    0.000000] BRK [0x109665000, 0x109665fff] PGTABLE
[    0.000000] BRK [0x109666000, 0x109666fff] PGTABLE
[    0.000000] BRK [0x109667000, 0x109667fff] PGTABLE
[    0.000000] BRK [0x109668000, 0x109668fff] PGTABLE
[    0.000000] BRK [0x109669000, 0x109669fff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x36e1b000-0x37704fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007A4F9000 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0x000000007A4F90C0 000104 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007A53A888 000114 (v06 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007A4F9258 041630 (v02 _ASUS_ Notebook 01072009 INTL 20160527)
[    0.000000] ACPI: FACS 0x000000007A648080 000040
[    0.000000] ACPI: APIC 0x000000007A53A9A0 0000BC (v04 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000007A53AA60 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000007A53AAA8 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000007A53AB48 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x000000007A53AB88 000334 (v01 SataRe SataTabl 00001000 INTL 20160527)
[    0.000000] ACPI: SSDT 0x000000007A53AEC0 007117 (v02 DptfTa DptfTabl 00001000 INTL 20160527)
[    0.000000] ACPI: SSDT 0x000000007A541FD8 0017D5 (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
[    0.000000] ACPI: MSDM 0x000000007A5437B0 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001)
[    0.000000] ACPI: SSDT 0x000000007A543808 0031D7 (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
[    0.000000] ACPI: SSDT 0x000000007A5469E0 0022CC (v02 PegSsd PegSsdt  00001000 INTL 20160527)
[    0.000000] ACPI: HPET 0x000000007A548CB0 000038 (v01 INTEL  Notebook 00000002      01000013)
[    0.000000] ACPI: SSDT 0x000000007A548CE8 000F9E (v02 INTEL  Ther_Rvp 00001000 INTL 20160527)
[    0.000000] ACPI: SSDT 0x000000007A549C88 002951 (v02 INTEL  xh_cfhd4 00000000 INTL 20160527)
[    0.000000] ACPI: UEFI 0x000000007A54C5E0 000048 (v01 _ASUS_ Notebook 00000002      01000013)
[    0.000000] ACPI: LPIT 0x000000007A54C628 00005C (v01 INTEL  Notebook 00000002      01000013)
[    0.000000] ACPI: WSMT 0x000000007A54C688 000028 (v01 INTEL  Notebook 00000002      01000013)
[    0.000000] ACPI: SSDT 0x000000007A54C6B0 0027DE (v02 INTEL  PtidDevc 00001000 INTL 20160527)
[    0.000000] ACPI: SSDT 0x000000007A54EE90 000FFE (v02 INTEL  TbtTypeC 00000000 INTL 20160527)
[    0.000000] ACPI: DBGP 0x000000007A54FE90 000034 (v01 _ASUS_ Notebook 00000002      01000013)
[    0.000000] ACPI: DBG2 0x000000007A54FEC8 000054 (v00 _ASUS_ Notebook 00000002      01000013)
[    0.000000] ACPI: SSDT 0x000000007A54FF20 0000AE (v02 SgRef  SgPeg    00001000 INTL 20160527)
[    0.000000] ACPI: DMAR 0x000000007A54FFD0 0000A8 (v01 INTEL  EDK2     00000002      01000013)
[    0.000000] ACPI: BGRT 0x000000007A550078 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: BGRT 0x000000007A5500B0 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: TPM2 0x000000007A5500E8 000034 (v04 _ASUS_ Notebook 00000001 AMI  00000000)
[    0.000000] ACPI: SSDT 0x000000007A550120 001F96 (v01 OptRef OptTabl  00001000 INTL 20160527)
[    0.000000] ACPI: BGRT 0x000000007A5520B8 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027dffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x27dffc000-0x27dffffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027dffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000079048fff]
[    0.000000]   node   0: [mem 0x000000007ad0e000-0x000000007ad0efff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027dffffff]
[    0.000000] Reserved but unavailable: 28696 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027dffffff]
[    0.000000] On node 0 totalpages: 2060264
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 23 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7682 pages used for memmap
[    0.000000]   DMA32 zone: 491594 pages, LIFO batch:31
[    0.000000]   Normal zone: 24448 pages used for memmap
[    0.000000]   Normal zone: 1564672 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x79049000-0x7a4dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a4e0000-0x7a55cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a55d000-0x7a648fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a649000-0x7ac40fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ac41000-0x7ad0dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ad0f000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2028047
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=09ec7c7b-5a14-4175-baf4-65969ce3995e rw quiet
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7966324K/8241056K available (10252K kernel code, 1290K rwdata, 3488K rodata, 1480K init, 608K bss, 274732K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 32659 entries in 128 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: (none).
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180313
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.003333] APIC: Switch to symmetric I/O mode setup
[    0.003333] DMAR: Host address width 39
[    0.003333] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.003333] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.003333] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.003333] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.003333] DMAR: RMRR base: 0x0000007a817000 end: 0x0000007aa60fff
[    0.003333] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[    0.003333] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.003333] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.003333] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.003333] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.003333] x2apic enabled
[    0.003333] Switched APIC routing to cluster x2apic.
[    0.013333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.029999] tsc: Detected 2300.000 MHz processor
[    0.029999] tsc: Detected 2304.000 MHz TSC
[    0.029999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2135f7c97c8, max_idle_ns: 440795273205 ns
[    0.029999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4609.00 BogoMIPS (lpj=7680000)
[    0.029999] pid_max: default: 32768 minimum: 301
[    0.029999] Security Framework initialized
[    0.029999] Yama: becoming mindful.
[    0.029999] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.029999] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.029999] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.029999] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.029999] CPU: Physical Processor ID: 0
[    0.029999] CPU: Processor Core ID: 0
[    0.029999] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.029999] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.029999] mce: CPU supports 10 MCE banks
[    0.029999] CPU0: Thermal monitoring enabled (TM1)
[    0.029999] process: using mwait in idle threads
[    0.029999] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.029999] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.029999] Spectre V2 : Mitigation: Full generic retpoline
[    0.029999] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.029999] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.029999] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.029999] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.037242] Freeing SMP alternatives memory: 28K
[    0.039510] TSC deadline timer enabled
[    0.039521] smpboot: CPU0: Intel(R) Core(TM) i5-8300H CPU @ 2.30GHz (family: 0x6, model: 0x9e, stepping: 0xa)
[    0.053351] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.053412] ... version:                4
[    0.053413] ... bit width:              48
[    0.053413] ... generic registers:      4
[    0.053414] ... value mask:             0000ffffffffffff
[    0.053415] ... max period:             00007fffffffffff
[    0.053416] ... fixed-purpose events:   3
[    0.053416] ... event mask:             000000070000000f
[    0.056683] Hierarchical SRCU implementation.
[    0.066955] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.070024] smp: Bringing up secondary CPUs ...
[    0.093365] x86: Booting SMP configuration:
[    0.093383] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.233933] smp: Brought up 1 node, 8 CPUs
[    0.233933] smpboot: Max logical packages: 1
[    0.233933] smpboot: Total of 8 processors activated (36878.00 BogoMIPS)
[    0.236981] devtmpfs: initialized
[    0.236981] x86/mm: Memory block size: 128MB
[    0.237358] PM: Registering ACPI NVS region [mem 0x7a55d000-0x7a648fff] (966656 bytes)
[    0.237358] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.237358] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.237358] pinctrl core: initialized pinctrl subsystem
[    0.237358] RTC time: 10:20:35, date: 08/18/18
[    0.237358] NET: Registered protocol family 16
[    0.237358] cpuidle: using governor ladder
[    0.237358] cpuidle: using governor menu
[    0.237358] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.237358] ACPI: bus type PCI registered
[    0.237358] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.237358] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.237358] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.237358] PCI: Using configuration type 1 for base access
[    0.240010] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.240012] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.240103] ACPI: Added _OSI(Module Device)
[    0.240105] ACPI: Added _OSI(Processor Device)
[    0.240106] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.240107] ACPI: Added _OSI(Processor Aggregator Device)
[    0.240108] ACPI: Added _OSI(Linux-Dell-Video)
[    0.314368] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.GPLD], AE_ALREADY_EXISTS (20180313/dswload2-316)
[    0.314385] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180313/psobject-221)
[    0.314409] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180313/psargs-330)
[    0.314416] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.314444] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180313/psargs-330)
[    0.314451] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.314472] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.REV], AE_NOT_FOUND (20180313/psargs-330)
[    0.314478] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.314498] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.REV], AE_NOT_FOUND (20180313/psargs-330)
[    0.314504] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.314525] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180313/psargs-330)
[    0.314531] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.314552] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.VISI], AE_NOT_FOUND (20180313/psargs-330)
[    0.314558] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.314578] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.VISI], AE_NOT_FOUND (20180313/psargs-330)
[    0.314584] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.314605] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180313/psargs-330)
[    0.314612] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.314633] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.GPOS], AE_NOT_FOUND (20180313/psargs-330)
[    0.314639] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.314660] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.GPOS], AE_NOT_FOUND (20180313/psargs-330)
[    0.314666] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.314686] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180313/psargs-330)
[    0.314692] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.314697] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.TPLD], AE_ALREADY_EXISTS (20180313/dswload2-316)
[    0.314703] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180313/psobject-221)
[    0.314724] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180313/psargs-330)
[    0.314730] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.314756] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180313/psargs-330)
[    0.314763] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.314785] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.REV], AE_NOT_FOUND (20180313/psargs-330)
[    0.314791] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.314813] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.REV], AE_NOT_FOUND (20180313/psargs-330)
[    0.314818] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.314840] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180313/psargs-330)
[    0.314846] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.314868] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.VISI], AE_NOT_FOUND (20180313/psargs-330)
[    0.314873] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.314894] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.VISI], AE_NOT_FOUND (20180313/psargs-330)
[    0.314900] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.314921] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180313/psargs-330)
[    0.314927] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.314949] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.GPOS], AE_NOT_FOUND (20180313/psargs-330)
[    0.314955] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.314976] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.GPOS], AE_NOT_FOUND (20180313/psargs-330)
[    0.314981] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.315003] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180313/psargs-330)
[    0.315009] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.315031] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.SHAP], AE_NOT_FOUND (20180313/psargs-330)
[    0.315037] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.315057] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.SHAP], AE_NOT_FOUND (20180313/psargs-330)
[    0.315063] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.315084] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180313/psargs-330)
[    0.315090] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.315113] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.WID], AE_NOT_FOUND (20180313/psargs-330)
[    0.315119] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.315139] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.WID], AE_NOT_FOUND (20180313/psargs-330)
[    0.315145] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.315167] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180313/psargs-330)
[    0.315173] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.315195] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.HGT], AE_NOT_FOUND (20180313/psargs-330)
[    0.315201] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.315222] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.HGT], AE_NOT_FOUND (20180313/psargs-330)
[    0.315228] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.315248] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180313/psargs-330)
[    0.315254] ACPI Error: Ignore error and continue table load (20180313/psobject-604)
[    0.315259] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.GUPC], AE_ALREADY_EXISTS (20180313/dswload2-316)
[    0.315265] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180313/psobject-221)
[    0.318092] ACPI: 12 ACPI AML tables successfully acquired and loaded
[    0.337665] ACPI: Dynamic OEM Table Load:
[    0.337673] ACPI: SSDT 0xFFFFA0EAB3910000 0005DF (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.338485] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.340944] ACPI: Dynamic OEM Table Load:
[    0.340950] ACPI: SSDT 0xFFFFA0EAB3B82000 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.342263] ACPI: Dynamic OEM Table Load:
[    0.342271] ACPI: SSDT 0xFFFFA0EAB346A000 000EF1 (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.344139] ACPI: Dynamic OEM Table Load:
[    0.344145] ACPI: SSDT 0xFFFFA0EAB3B85C00 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.349695] ACPI: EC: EC started
[    0.349695] ACPI: EC: interrupt blocked
[    0.349818] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.349820] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x37, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.349822] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.349823] ACPI: Interpreter enabled
[    0.349876] ACPI: (supports S0 S3 S4 S5)
[    0.349877] ACPI: Using IOAPIC for interrupt routing
[    0.349927] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.351808] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.355329] ACPI: Power Resource [PG00] (on)
[    0.393063] ACPI: Power Resource [USBC] (on)
[    0.397861] ACPI: Power Resource [V0PR] (on)
[    0.398143] ACPI: Power Resource [V1PR] (on)
[    0.398415] ACPI: Power Resource [V2PR] (on)
[    0.414334] ACPI: Power Resource [WRST] (on)
[    0.422816] ACPI: Power Resource [FN00] (off)
[    0.422943] ACPI: Power Resource [FN01] (off)
[    0.423070] ACPI: Power Resource [FN02] (off)
[    0.423195] ACPI: Power Resource [FN03] (off)
[    0.423319] ACPI: Power Resource [FN04] (off)
[    0.424336] ACPI: Power Resource [PIN] (off)
[    0.425007] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.425015] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.425303] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.425575] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.425577] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.426838] PCI host bridge to bus 0000:00
[    0.426840] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.426842] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.426844] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.426845] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.426846] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.426848] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.426849] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.426850] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.426852] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.426853] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.426855] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.426864] pci 0000:00:00.0: [8086:3e10] type 00 class 0x060000
[    0.427401] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.427449] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.427764] pci 0000:00:02.0: [8086:3e9b] type 00 class 0x030000
[    0.427777] pci 0000:00:02.0: reg 0x10: [mem 0xa2000000-0xa2ffffff 64bit]
[    0.427783] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.427788] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.427806] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.428001] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.428013] pci 0000:00:04.0: reg 0x10: [mem 0xa4310000-0xa4317fff 64bit]
[    0.428271] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.428283] pci 0000:00:08.0: reg 0x10: [mem 0xa432b000-0xa432bfff 64bit]
[    0.428562] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[    0.428611] pci 0000:00:12.0: reg 0x10: [mem 0xa432a000-0xa432afff 64bit]
[    0.428996] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[    0.429042] pci 0000:00:14.0: reg 0x10: [mem 0xa4300000-0xa430ffff 64bit]
[    0.429193] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.429471] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[    0.429509] pci 0000:00:14.2: reg 0x10: [mem 0xa4322000-0xa4323fff 64bit]
[    0.429529] pci 0000:00:14.2: reg 0x18: [mem 0xa4329000-0xa4329fff 64bit]
[    0.430312] pci 0000:00:14.3: [8086:a370] type 00 class 0x028000
[    0.431754] pci 0000:00:14.3: reg 0x10: [mem 0xa431c000-0xa431ffff 64bit]
[    0.436342] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.438051] pci 0000:00:15.0: [8086:a368] type 00 class 0x0c8000
[    0.438779] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.441344] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[    0.441389] pci 0000:00:16.0: reg 0x10: [mem 0xa4327000-0xa4327fff 64bit]
[    0.441520] pci 0000:00:16.0: PME# supported from D3hot
[    0.441878] pci 0000:00:17.0: [8086:a353] type 00 class 0x010601
[    0.441918] pci 0000:00:17.0: reg 0x10: [mem 0xa4320000-0xa4321fff]
[    0.441934] pci 0000:00:17.0: reg 0x14: [mem 0xa4326000-0xa43260ff]
[    0.441950] pci 0000:00:17.0: reg 0x18: [io  0x5090-0x5097]
[    0.441966] pci 0000:00:17.0: reg 0x1c: [io  0x5080-0x5083]
[    0.441982] pci 0000:00:17.0: reg 0x20: [io  0x5060-0x507f]
[    0.441999] pci 0000:00:17.0: reg 0x24: [mem 0xa4325000-0xa43257ff]
[    0.442089] pci 0000:00:17.0: PME# supported from D3hot
[    0.442442] pci 0000:00:1d.0: [8086:a336] type 01 class 0x060400
[    0.442651] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.442696] pci 0000:00:1d.0: PTM enabled (root), 4dns granularity
[    0.443062] pci 0000:00:1f.0: [8086:a30d] type 00 class 0x060100
[    0.443557] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[    0.443636] pci 0000:00:1f.3: reg 0x10: [mem 0xa4318000-0xa431bfff 64bit]
[    0.443711] pci 0000:00:1f.3: reg 0x20: [mem 0xa4100000-0xa41fffff 64bit]
[    0.443865] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.444285] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[    0.444477] pci 0000:00:1f.4: reg 0x10: [mem 0xa4324000-0xa43240ff 64bit]
[    0.444692] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.445144] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[    0.445174] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.445476] pci 0000:01:00.0: [10de:1c8d] type 00 class 0x030200
[    0.445491] pci 0000:01:00.0: reg 0x10: [mem 0xa3000000-0xa3ffffff]
[    0.445500] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.445508] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
[    0.445514] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.445520] pci 0000:01:00.0: reg 0x30: [mem 0xa4000000-0xa407ffff pref]
[    0.445739] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.445742] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.445745] pci 0000:00:01.0:   bridge window [mem 0xa3000000-0xa40fffff]
[    0.445748] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.445898] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.445944] pci 0000:02:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.445985] pci 0000:02:00.0: reg 0x18: [mem 0xa4204000-0xa4204fff 64bit]
[    0.446009] pci 0000:02:00.0: reg 0x20: [mem 0xa4200000-0xa4203fff 64bit]
[    0.446156] pci 0000:02:00.0: supports D1 D2
[    0.446157] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.446362] pci 0000:00:1d.0: PCI bridge to [bus 02]
[    0.446368] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.446373] pci 0000:00:1d.0:   bridge window [mem 0xa4200000-0xa42fffff]
[    0.448964] ACPI: PCI Interrupt Link [LNKA] (IRQs) *0
[    0.449016] ACPI: PCI Interrupt Link [LNKB] (IRQs) *1
[    0.449066] ACPI: PCI Interrupt Link [LNKC] (IRQs) *0
[    0.449115] ACPI: PCI Interrupt Link [LNKD] (IRQs) *0
[    0.449164] ACPI: PCI Interrupt Link [LNKE] (IRQs) *0
[    0.449213] ACPI: PCI Interrupt Link [LNKF] (IRQs) *0
[    0.449262] ACPI: PCI Interrupt Link [LNKG] (IRQs) *0
[    0.449311] ACPI: PCI Interrupt Link [LNKH] (IRQs) *0
[    0.450892] ACPI: EC: interrupt unblocked
[    0.450974] ACPI: EC: event unblocked
[    0.451053] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x37, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.451055] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.451146] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.451146] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.451146] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.451146] vgaarb: loaded
[    0.451146] pps_core: LinuxPPS API ver. 1 registered
[    0.451146] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.451146] PTP clock support registered
[    0.451146] EDAC MC: Ver: 3.0.0
[    0.451146] Registered efivars operations
[    0.470840] PCI: Using ACPI for IRQ routing
[    0.557104] PCI: pci_cache_line_size set to 64 bytes
[    0.557387] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.557389] e820: reserve RAM buffer [mem 0x79049000-0x7bffffff]
[    0.557390] e820: reserve RAM buffer [mem 0x7ad0f000-0x7bffffff]
[    0.557391] e820: reserve RAM buffer [mem 0x27e000000-0x27fffffff]
[    0.557471] NetLabel: Initializing
[    0.557472] NetLabel:  domain hash size = 128
[    0.557473] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.557485] NetLabel:  unlabeled traffic allowed by default
[    0.557489] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.557489] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.561042] clocksource: Switched to clocksource tsc-early
[    0.570604] VFS: Disk quotas dquot_6.6.0
[    0.570619] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.570674] pnp: PnP ACPI init
[    0.570939] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.570941] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.570946] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.570969] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.571095] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.571099] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.571174] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.571417] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.571419] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.571421] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.571422] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.571424] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.571426] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.571427] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.571429] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.571433] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.571749] system 00:05: [io  0x1800-0x18fe] could not be reserved
[    0.571752] system 00:05: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.571753] system 00:05: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[    0.571755] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.571757] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.571758] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.571760] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.571764] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.572195] system 00:06: [io  0x2000-0x20fe] has been reserved
[    0.572199] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.573784] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.575171] pnp: PnP ACPI: found 8 devices
[    0.580864] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.580899] pci 0000:00:15.0: BAR 0: assigned [mem 0xa4328000-0xa4328fff 64bit]
[    0.581174] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.581176] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.581179] pci 0000:00:01.0:   bridge window [mem 0xa3000000-0xa40fffff]
[    0.581182] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.581186] pci 0000:00:1d.0: PCI bridge to [bus 02]
[    0.581193] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.581200] pci 0000:00:1d.0:   bridge window [mem 0xa4200000-0xa42fffff]
[    0.581215] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.581217] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.581218] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.581220] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000e3fff window]
[    0.581221] pci_bus 0000:00: resource 8 [mem 0x000e4000-0x000e7fff window]
[    0.581223] pci_bus 0000:00: resource 9 [mem 0x000e8000-0x000ebfff window]
[    0.581224] pci_bus 0000:00: resource 10 [mem 0x000ec000-0x000effff window]
[    0.581226] pci_bus 0000:00: resource 11 [mem 0x000f0000-0x000fffff window]
[    0.581227] pci_bus 0000:00: resource 12 [mem 0x80000000-0xdfffffff window]
[    0.581228] pci_bus 0000:00: resource 13 [mem 0xfc800000-0xfe7fffff window]
[    0.581230] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.581231] pci_bus 0000:01: resource 1 [mem 0xa3000000-0xa40fffff]
[    0.581233] pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.581234] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.581236] pci_bus 0000:02: resource 1 [mem 0xa4200000-0xa42fffff]
[    0.581463] NET: Registered protocol family 2
[    0.581581] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.581611] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.581712] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.581843] TCP: Hash tables configured (established 65536 bind 65536)
[    0.581873] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.581897] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.581944] NET: Registered protocol family 1
[    0.581956] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.582144] PCI: CLS 64 bytes, default 64
[    0.582172] Unpacking initramfs...
[    0.705404] Freeing initrd memory: 9128K
[    0.705440] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.705443] software IO TLB [mem 0x717df000-0x757df000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.705467] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135f7c97c8, max_idle_ns: 440795273205 ns
[    0.705489] clocksource: Switched to clocksource tsc
[    0.705618] Scanning for low memory corruption every 60 seconds
[    0.706184] Initialise system trusted keyrings
[    0.706191] Key type blacklist registered
[    0.706233] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.707399] zbud: loaded
[    0.707733] pstore: using lz4hc compression
[    0.708802] Key type asymmetric registered
[    0.708803] Asymmetric key parser 'x509' registered
[    0.708831] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.708864] io scheduler noop registered
[    0.708865] io scheduler deadline registered
[    0.708903] io scheduler cfq registered (default)
[    0.708904] io scheduler mq-deadline registered
[    0.708905] io scheduler kyber registered
[    0.708910] io scheduler bfq registered
[    0.709998] pcieport 0000:00:1d.0: AER enabled with IRQ 122
[    0.710039] dpc 0000:00:1d.0:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.710096] efifb: probing for efifb
[    0.710105] efifb: framebuffer at 0x80000000, using 1920k, total 1920k
[    0.710106] efifb: mode is 800x600x32, linelength=3200, pages=1
[    0.710107] efifb: scrolling: redraw
[    0.710108] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.711131] Console: switching to colour frame buffer device 100x37
[    0.712079] fb0: EFI VGA frame buffer device
[    0.712086] intel_idle: MWAIT substates: 0x11142120
[    0.712087] intel_idle: v0.4.1 model 0x9E
[    0.712472] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.712549] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.712557] ACPI: Sleep Button [SLPB]
[    0.712587] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.712593] ACPI: Power Button [PWRB]
[    0.712623] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.712633] ACPI: Lid Switch [LID0]
[    0.712669] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.712676] ACPI: Power Button [PWRF]
[    0.768531] ACPI: Invalid active0 threshold
[    0.768819] thermal LNXTHERM:00: registered as thermal_zone0
[    0.768821] ACPI: Thermal Zone [THRM] (49 C)
[    0.817061] thermal LNXTHERM:01: registered as thermal_zone1
[    0.817062] ACPI: Thermal Zone [TZ00] (28 C)
[    0.817347] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.819627] intel_pstate: Intel P-state driver initializing
[    0.819676] intel_pstate: Disabling energy efficiency optimization
[    0.820216] intel_pstate: HWP enabled
[    0.820426] ledtrig-cpu: registered to indicate activity on CPUs
[    0.820462] intel_pmc_core:  initialized
[    0.820746] NET: Registered protocol family 10
[    0.825754] Segment Routing with IPv6
[    0.825784] NET: Registered protocol family 17
[    0.827093] RAS: Correctable Errors collector initialized.
[    0.827189] microcode: sig=0x906ea, pf=0x20, revision=0x96
[    0.827535] microcode: Microcode Update Driver: v2.2.
[    0.827552] sched_clock: Marking stable (827520428, 0)->(809632073, 17888355)
[    0.828450] registered taskstats version 1
[    0.828459] Loading compiled-in X.509 certificates
[    0.828490] zswap: loaded using pool lzo/zbud
[    0.831032] Key type big_key registered
[    0.831815]   Magic number: 14:694:325
[    0.831870] hctosys: unable to open rtc device (rtc0)
[    0.954621] Freeing unused kernel memory: 1480K
[    0.954622] Write protecting the kernel read-only data: 16384k
[    0.956883] Freeing unused kernel memory: 2016K
[    0.957606] Freeing unused kernel memory: 608K
[    1.042486] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.042487] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.043630] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.050944] ACPI: bus type USB registered
[    1.050963] usbcore: registered new interface driver usbfs
[    1.050971] usbcore: registered new interface driver hub
[    1.051001] usbcore: registered new device driver usb
[    1.052353] SCSI subsystem initialized
[    1.055705] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.055711] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.056828] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x110 quirks 0x00009810
[    1.056837] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.057021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    1.057023] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.057024] usb usb1: Product: xHCI Host Controller
[    1.057026] usb usb1: Manufacturer: Linux 4.17.14-arch1-1-ARCH xhci-hcd
[    1.057027] usb usb1: SerialNumber: 0000:00:14.0
[    1.057134] hub 1-0:1.0: USB hub found
[    1.057156] hub 1-0:1.0: 16 ports detected
[    1.057942] libata version 3.00 loaded.
[    1.058876] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.058880] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.058883] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.058936] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
[    1.058938] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.058940] usb usb2: Product: xHCI Host Controller
[    1.058941] usb usb2: Manufacturer: Linux 4.17.14-arch1-1-ARCH xhci-hcd
[    1.058943] usb usb2: SerialNumber: 0000:00:14.0
[    1.059046] hub 2-0:1.0: USB hub found
[    1.059071] hub 2-0:1.0: 8 ports detected
[    1.059471] usb: port power management may be unreliable
[    1.059890] ahci 0000:00:17.0: version 3.0
[    1.065148] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.070406] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x10 impl SATA mode
[    1.070408] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst 
[    1.071087] scsi host0: ahci
[    1.071344] scsi host1: ahci
[    1.071553] scsi host2: ahci
[    1.071687] scsi host3: ahci
[    1.071815] scsi host4: ahci
[    1.071842] ata1: DUMMY
[    1.071842] ata2: DUMMY
[    1.071843] ata3: DUMMY
[    1.071843] ata4: DUMMY
[    1.071848] ata5: SATA max UDMA/133 abar m2048@0xa4325000 port 0xa4325300 irq 124
[    1.386743] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[    1.387588] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.464733] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.464738] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.464742] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.530549] usb 1-1: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[    1.530553] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.530556] usb 1-1: Product: USB Optical Mouse
[    1.530559] usb 1-1: Manufacturer: PixArt
[    1.535843] hidraw: raw HID events driver (C) Jiri Kosina
[    1.539646] usbcore: registered new interface driver usbhid
[    1.539646] usbhid: USB HID core driver
[    1.545431] ata5.00: ATA-10: ST1000LX015-1U7172, SDM1, max UDMA/133
[    1.545432] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.607400] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.607405] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.607409] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.653417] usb 1-7: new high-speed USB device number 3 using xhci_hcd
[    1.688291] ata5.00: configured for UDMA/133
[    1.688601] scsi 4:0:0:0: Direct-Access     ATA      ST1000LX015-1U71 SDM1 PQ: 0 ANSI: 5
[    1.697671] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.697676] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    1.697721] sd 4:0:0:0: [sda] Write Protect is off
[    1.697726] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.697776] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.701227]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[    1.702125] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.824725] usb 1-7: New USB device found, idVendor=13d3, idProduct=5666, bcdDevice= 3.22
[    1.824731] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.824736] usb 1-7: Product: USB2.0 HD UVC WebCam
[    1.824741] usb 1-7: Manufacturer: Azurewave
[    1.824745] usb 1-7: SerialNumber: NULL
[    1.910578] random: fast init done
[    1.950033] usb 1-14: new full-speed USB device number 4 using xhci_hcd
[    1.965535] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    2.091245] usb 1-14: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
[    2.091250] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.345271] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    2.360843] systemd[1]: Detected architecture x86-64.
[    2.372670] systemd[1]: Set hostname to <wolf>.
[    2.611936] random: systemd: uninitialized urandom read (16 bytes read)
[    2.612344] systemd[1]: Listening on LVM2 poll daemon socket.
[    2.612451] random: systemd: uninitialized urandom read (16 bytes read)
[    2.612644] systemd[1]: Listening on Journal Socket.
[    2.612687] random: systemd: uninitialized urandom read (16 bytes read)
[    2.613134] systemd[1]: Listening on LVM2 metadata daemon socket.
[    2.613266] systemd[1]: Listening on udev Kernel Socket.
[    2.616269] systemd[1]: Mounting POSIX Message Queue File System...
[    2.616291] systemd[1]: Reached target Remote File Systems.
[    2.616698] systemd[1]: Mounting Huge Pages File System...
[    2.739817] EXT4-fs (sda7): re-mounted. Opts: (null)
[    2.771996] systemd-journald[266]: Received request to flush runtime journal from PID 1
[    3.662979] ACPI: AC Adapter [ACAD] (on-line)
[    3.675605] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input5
[    3.676130] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[    3.848776] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    3.848874] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    3.855026] Linux agpgart interface v0.103
[    3.855972] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    3.893487] tpm tpm0: A TPM error (378) occurred get tpm pcr allocation
[    3.913747] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    3.918579] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    3.918581] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.918582] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.918582] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.918583] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.918584] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    3.920395] ACPI: Battery Slot [BAT1] (battery present)
[    3.929567] cryptd: max_cpu_qlen set to 1000
[    3.951635] rtc_cmos 00:01: RTC can wake from S4
[    3.952697] rtc_cmos 00:01: registered as rtc0
[    3.952712] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    3.956607] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.960633] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    3.963194] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    3.967165] cannonlake-pinctrl INT3450:00: pin 225 cannot be used as IRQ
[    3.967171] genirq: Setting trigger mode 8 for irq 125 failed (intel_gpio_irq_type+0x0/0x140)
[    3.967310] i2c_hid i2c-ELAN1200:00: i2c-ELAN1200:00 supply vdd not found, using dummy regulator
[    3.968972] AVX2 version of gcm_enc/dec engaged.
[    3.968973] AES CTR mode by8 optimization enabled
[    3.969204] cannonlake-pinctrl INT3450:00: pin 225 cannot be used as IRQ
[    3.969206] genirq: Setting trigger mode 8 for irq 125 failed (intel_gpio_irq_type+0x0/0x140)
[    3.969241] i2c_hid i2c-ELAN1200:00: Could not register for ELAN1200:00 interrupt, irq = 125, ret = -1
[    3.969272] i2c_hid: probe of i2c-ELAN1200:00 failed with error -1
[    3.979633] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    4.080356] media: Linux media interface: v0.10
[    4.084287] asus_wmi: ASUS WMI generic driver loaded
[    4.086532] asus_wmi: Initialization: 0x1
[    4.086880] asus_wmi: BIOS WMI version: 8.1
[    4.087140] asus_wmi: SFUN value: 0x4a0061
[    4.089563] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input7
[    4.090971] asus_wmi: Number of fans: 1
[    4.098537] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.098547] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    4.106352] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:093A:2510.0001/input/input8
[    4.106407] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-1/input0
[    4.107860] r8169 0000:02:00.0 eth0: RTL8168h/8111h at 0x        (ptrval), 0c:9d:92:58:2e:32, XID 14100800 IRQ 127
[    4.107863] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    4.126161] Linux video capture interface: v2.00
[    4.132685] Bluetooth: Core ver 2.22
[    4.132696] NET: Registered protocol family 31
[    4.132696] Bluetooth: HCI device and connection manager initialized
[    4.132699] Bluetooth: HCI socket layer initialized
[    4.132701] Bluetooth: L2CAP socket layer initialized
[    4.132704] Bluetooth: SCO socket layer initialized
[    4.138531] random: crng init done
[    4.138532] random: 7 urandom warning(s) missed due to ratelimiting
[    4.143448] usbcore: registered new interface driver btusb
[    4.144230] Bluetooth: hci0: Firmware revision 0.1 build 7 week 17 2018
[    4.149333] iTCO_vendor_support: vendor-support=0
[    4.149533] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (13d3:5666)
[    4.150994] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    4.151258] iTCO_wdt iTCO_wdt: can't request region for resource [mem 0x00c5fffc-0x00c5ffff]
[    4.151304] iTCO_wdt: probe of iTCO_wdt failed with error -16
[    4.157194] uvcvideo 1-7:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
[    4.157196] uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not initialized!
[    4.157197] uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not initialized!
[    4.157199] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
[    4.157240] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input9
[    4.157284] usbcore: registered new interface driver uvcvideo
[    4.157285] USB Video Class driver (1.1.1)
[    4.164548] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    4.165584] mousedev: PS/2 mouse device common for all mice
[    4.270059] Adding 4194300k swap on /dev/sda6.  Priority:-2 extents:1 across:4194300k FS
[    4.383893] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.385563] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.388264] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    4.388265] cfg80211: failed to load regulatory.db
[    4.409154] Intel(R) Wireless WiFi driver for Linux
[    4.409155] Copyright(c) 2003- 2015 Intel Corporation
[    4.409196] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[    4.427459] iwlwifi 0000:00:14.3: loaded firmware version 38.c0e03d94.0 op_mode iwlmvm
[    4.456896] checking generic (80000000 1e0000) vs hw (80000000 10000000)
[    4.456898] fb: switching to inteldrmfb from EFI VGA
[    4.456923] Console: switching to colour dummy device 80x25
[    4.457257] [drm] Replacing VGA console driver
[    4.464977] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.464978] [drm] Driver supports precise vblank timestamp query.
[    4.465922] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.466891] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    4.474607] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
[    4.476511] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.476871] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    4.476963] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    4.477003] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:01/input/input11
[    4.484289] fbcon: inteldrmfb (fb0) is primary device
[    4.488558] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    4.512550] iwlwifi 0000:00:14.3: Detected Intel(R) Dual Band Wireless AC 9560, REV=0x318
[    4.563672] iwlwifi 0000:00:14.3: base HW address: 30:24:32:a7:0c:29
[    4.563872] intel_rapl: Found RAPL domain package
[    4.563873] intel_rapl: Found RAPL domain core
[    4.563874] intel_rapl: Found RAPL domain uncore
[    4.563876] intel_rapl: Found RAPL domain dram
[    4.794966] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    4.795725] thermal thermal_zone6: failed to read out thermal zone (-61)
[    4.799778] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0
[    5.782932] Console: switching to colour frame buffer device 240x67
[    5.783063] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.805874] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.814559] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    5.814561] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.814562] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    5.814563] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    5.814563] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.814565] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12
[    5.872139] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    5.872214] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    5.872322] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    5.872421] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    5.872539] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    5.872611] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    6.353267] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    6.409742] r8169 0000:02:00.0 enp2s0: link down
[    6.409891] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    6.415675] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    6.618538] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    6.826764] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    7.007244] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   10.280877] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   10.987051] wlo1: authenticate with c8:3a:35:53:19:d8
[   10.995956] wlo1: send auth to c8:3a:35:53:19:d8 (try 1/3)
[   11.033495] wlo1: authenticated
[   11.036759] wlo1: associate with c8:3a:35:53:19:d8 (try 1/3)
[   11.040214] wlo1: RX AssocResp from c8:3a:35:53:19:d8 (capab=0x411 status=0 aid=3)
[   11.041684] wlo1: associated
[   11.074249] iwlwifi 0000:00:14.3: Unhandled alg: 0x707
[   12.074295] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 6416.791179] wlo1: deauthenticating from c8:3a:35:53:19:d8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 6416.809525] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 6416.856442] PM: suspend entry (deep)
[ 6416.856443] PM: Syncing filesystems ... done.
[ 6418.526278] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 6418.527877] OOM killer disabled.
[ 6418.527878] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[ 6418.528703] Suspending console(s) (use no_console_suspend to debug)
[ 6418.544976] sd 4:0:0:0: [sda] Synchronizing SCSI cache
[ 6418.545874] sd 4:0:0:0: [sda] Stopping disk
[ 6419.222295] ACPI: EC: interrupt blocked
[ 6419.297444] ACPI: Preparing to enter system sleep state S3
[ 6419.299031] ACPI: EC: event blocked
[ 6419.299032] ACPI: EC: EC stopped
[ 6419.299033] PM: Saving platform NVS memory
[ 6419.299048] Disabling non-boot CPUs ...
[ 6419.345904] IRQ 130: no longer affine to CPU1
[ 6419.346943] smpboot: CPU 1 is now offline
[ 6419.385870] IRQ 131: no longer affine to CPU2
[ 6419.386901] smpboot: CPU 2 is now offline
[ 6419.439185] IRQ 132: no longer affine to CPU3
[ 6419.440223] smpboot: CPU 3 is now offline
[ 6419.489148] IRQ 133: no longer affine to CPU4
[ 6419.490188] smpboot: CPU 4 is now offline
[ 6419.549095] IRQ 134: no longer affine to CPU5
[ 6419.550126] smpboot: CPU 5 is now offline
[ 6419.592391] IRQ 135: no longer affine to CPU6
[ 6419.593426] smpboot: CPU 6 is now offline
[ 6419.632372] IRQ 136: no longer affine to CPU7
[ 6419.633404] smpboot: CPU 7 is now offline
[ 6419.641647] ACPI: Low-level resume complete
[ 6419.641802] ACPI: EC: EC started
[ 6419.641803] PM: Restoring platform NVS memory
[ 6419.648156] Enabling non-boot CPUs ...
[ 6419.648224] x86: Booting SMP configuration:
[ 6419.648226] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 6419.654564]  cache: parent cpu1 should not be sleeping
[ 6419.654671] intel_pstate: Disabling energy efficiency optimization
[ 6419.654792] microcode: sig=0x906ea, pf=0x20, revision=0x84
[ 6419.659605] microcode: updated to revision 0x96, date = 2018-05-02
[ 6419.659824] CPU1 is up
[ 6419.659873] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 6419.661446]  cache: parent cpu2 should not be sleeping
[ 6419.666739] CPU2 is up
[ 6419.666784] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 6419.668363]  cache: parent cpu3 should not be sleeping
[ 6419.673667] CPU3 is up
[ 6419.673710] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 6419.675715]  cache: parent cpu4 should not be sleeping
[ 6419.675939] microcode: sig=0x906ea, pf=0x20, revision=0x96
[ 6419.676206] CPU4 is up
[ 6419.676265] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 6419.677846]  cache: parent cpu5 should not be sleeping
[ 6419.678336] CPU5 is up
[ 6419.678381] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 6419.679962]  cache: parent cpu6 should not be sleeping
[ 6419.680503] CPU6 is up
[ 6419.680543] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 6419.682130]  cache: parent cpu7 should not be sleeping
[ 6419.682697] CPU7 is up
[ 6419.707463] ACPI: Waking up from system sleep state S3
[ 6419.712588] ACPI: EC: interrupt unblocked
[ 6419.807576] ACPI: EC: event unblocked
[ 6419.808376] sd 4:0:0:0: [sda] Starting disk
[ 6419.853134] r8169 0000:02:00.0 enp2s0: link down
[ 6419.943736] usb 1-7: reset high-speed USB device number 3 using xhci_hcd
[ 6420.120877] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6420.131513] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 6420.131518] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 6420.131522] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 6420.190538] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 6420.190543] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 6420.190547] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 6420.207027] usb 1-14: reset full-speed USB device number 4 using xhci_hcd
[ 6420.226563] ata5.00: configured for UDMA/133
[ 6422.489470] acpi LNXPOWER:05: Turning OFF
[ 6422.489563] OOM killer enabled.
[ 6422.489565] Restarting tasks ... 
[ 6422.490282] Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
[ 6422.490327] usb 1-1: USB disconnect, device number 2
[ 6422.491024] done.
[ 6422.491162] Bluetooth: hci0: Device revision is 2
[ 6422.491165] Bluetooth: hci0: Secure boot is enabled
[ 6422.491167] Bluetooth: hci0: OTP lock is enabled
[ 6422.491168] Bluetooth: hci0: API lock is enabled
[ 6422.491170] Bluetooth: hci0: Debug lock is disabled
[ 6422.491172] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 6422.491539] Bluetooth: hci0: Found device firmware: intel/ibt-17-16-1.sfi
[ 6422.543695] thermal thermal_zone6: failed to read out thermal zone (-61)
[ 6422.543982] PM: suspend exit
[ 6422.574454] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 6422.619488] r8169 0000:02:00.0 enp2s0: link down
[ 6422.619597] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 6422.620565] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 6422.812647] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 6423.026326] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 6423.092224] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 6423.829418] Bluetooth: hci0: Waiting for firmware download to complete
[ 6423.830140] Bluetooth: hci0: Firmware loaded in 1309512 usecs
[ 6423.830203] Bluetooth: hci0: Waiting for device to boot
[ 6423.843229] Bluetooth: hci0: Device booted in 12750 usecs
[ 6423.843256] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
[ 6423.848291] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 6426.367024] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 6427.062006] wlo1: authenticate with c8:3a:35:53:19:d8
[ 6427.068299] wlo1: send auth to c8:3a:35:53:19:d8 (try 1/3)
[ 6427.105763] wlo1: authenticated
[ 6427.106732] wlo1: associate with c8:3a:35:53:19:d8 (try 1/3)
[ 6427.110148] wlo1: RX AssocResp from c8:3a:35:53:19:d8 (capab=0x411 status=0 aid=5)
[ 6427.113438] wlo1: associated
[ 6427.143299] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 6475.753393] usb 1-1: new low-speed USB device number 5 using xhci_hcd
[ 6475.897025] usb 1-1: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[ 6475.897031] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6475.897034] usb 1-1: Product: USB Optical Mouse
[ 6475.897038] usb 1-1: Manufacturer: PixArt
[ 6475.900371] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:093A:2510.0002/input/input18
[ 6475.900624] hid-generic 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-1/input0

Offline

#6 2018-08-18 15:05:14

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Unable to use trackpad on asus fx504

[    1.042486] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.042487] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp

Did you try that boot option?

[    3.969241] i2c_hid i2c-ELAN1200:00: Could not register for ELAN1200:00 interrupt, irq = 125, ret = -1
[    3.969272] i2c_hid: probe of i2c-ELAN1200:00 failed with error -1

Is your trackpad manufactured by elantech?

Offline

#7 2018-08-19 06:40:54

ComeTOValhllaWithMe
Member
Registered: 2018-08-17
Posts: 23

Re: Unable to use trackpad on asus fx504

I tried

i8042.nopnp, i8042.reset & i8042.kbdreset=1

It did not resolve my problem.
Well I have no idea about trackpad manufacturer. The output of

xinput

is

➜  ~ xinput
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ PixArt USB Optical Mouse                	id=12	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Asus Wireless Radio Control             	id=7	[slave  keyboard (3)]
    ↳ Video Bus                               	id=8	[slave  keyboard (3)]
    ↳ Video Bus                               	id=9	[slave  keyboard (3)]
    ↳ Power Button                            	id=10	[slave  keyboard (3)]
    ↳ Sleep Button                            	id=11	[slave  keyboard (3)]
    ↳ USB2.0 HD UVC WebCam: USB2.0 HD         	id=13	[slave  keyboard (3)]
    ↳ Asus WMI hotkeys                        	id=14	[slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard            	id=15	[slave  keyboard (3)]

I also did

xinput set-prop 4 "Device Enabled" 1

still nothing happens.

Last edited by ComeTOValhllaWithMe (2018-08-19 06:47:00)

Offline

#8 2018-08-19 09:13:29

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Unable to use trackpad on asus fx504

Offline

#9 2018-08-21 13:45:43

ComeTOValhllaWithMe
Member
Registered: 2018-08-17
Posts: 23

Re: Unable to use trackpad on asus fx504

So do i need to patch my kernel?

Offline

#10 2018-08-21 16:43:54

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Unable to use trackpad on asus fx504

It was reported to solve the issue https://bbs.archlinux.org/viewtopic.php … 7#p1800537 .
In following the instructions in the linked wiki pages what have you done so far?

Offline

#11 2018-08-22 11:46:12

ComeTOValhllaWithMe
Member
Registered: 2018-08-17
Posts: 23

Re: Unable to use trackpad on asus fx504

I'm trying to apply patches as mentioned in the post. But I'm having trouble while writing prepare() function in PKGBUILD for applying these patches to the kernel.

Offline

#12 2018-08-22 11:53:48

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Unable to use trackpad on asus fx504

The prepare function of the linux package contains

  local src
  for src in "${source[@]}"; do
    src="${src%%::*}"
    src="${src##*/}"
    [[ $src = *.patch ]] || continue
    msg2 "Applying patch $src..."
    patch -Np1 < "../$src"
  done

This will apply any file in the sources array that ends .patch.  You just need to add the patch to the soucres array and either manually add its checksum or use `updpkgsums`

Offline

#13 2018-08-22 17:08:51

ComeTOValhllaWithMe
Member
Registered: 2018-08-17
Posts: 23

Re: Unable to use trackpad on asus fx504

Ok so I applied those patches and installed new kernel but for some reason custom kernels on my system crash at the time of boot(before getting any tty). Earlier I installed linux-ck kernel it also used to crash at the time of booting. Even fallback initramfs crashes on booting. It gets stuck after

genirq: setting trigger mode 8 for irq 136 failed(intel_gpio_irq)
iTco_wdt:can't request region for source mem[some Hex address]

I get these messages while using standard kernel too but it boots fine without any problem.

Last edited by ComeTOValhllaWithMe (2018-08-22 19:19:50)

Offline

#14 2018-08-22 18:45:35

seth
Member
Registered: 2012-09-03
Posts: 49,951

Offline

#15 2018-08-22 19:04:56

ComeTOValhllaWithMe
Member
Registered: 2018-08-17
Posts: 23

Re: Unable to use trackpad on asus fx504

@seth Unfortunately that didn't work for me

Last edited by ComeTOValhllaWithMe (2018-08-22 19:09:17)

Offline

#16 2018-08-22 19:19:01

seth
Member
Registered: 2012-09-03
Posts: 49,951

Offline

#17 2018-08-22 19:22:50

ComeTOValhllaWithMe
Member
Registered: 2018-08-17
Posts: 23

Re: Unable to use trackpad on asus fx504

Well this has been problem for me since installation. At the time of installation i had kernel 4.17.14 and now I have 4.18.3

Offline

#18 2018-08-22 19:51:44

seth
Member
Registered: 2012-09-03
Posts: 49,951

Re: Unable to use trackpad on asus fx504

That would reject https://bbs.archlinux.org/viewtopic.php … 6#p1803746
https://bugs.launchpad.net/ubuntu/+sour … ug/1782653 is extremely similar and supports https://bugzilla.kernel.org/show_bug.cgi?id=199911 as well, so we should focus on that patch.

https://bbs.archlinux.org/viewtopic.php … 0#p1803690 suggests you had trouble building the patched kernel, what *exactly* did you do to resolve those issues?

Offline

#19 2018-08-22 20:00:41

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Unable to use trackpad on asus fx504

On the none booting patched kernel please remove the quiet option and see if there is more output.  Does the journal record anything from that boot?

Offline

#20 2018-08-23 09:21:26

ComeTOValhllaWithMe
Member
Registered: 2018-08-17
Posts: 23

Re: Unable to use trackpad on asus fx504

@loqs so i removed the quiet from kernel parameter and got regular output till

[ok] Reached target Graphical interface

after that again it hangs.

Offline

#21 2018-08-23 09:22:33

ComeTOValhllaWithMe
Member
Registered: 2018-08-17
Posts: 23

Re: Unable to use trackpad on asus fx504

@seth I successfully installed patched kernel but as i mentioned all types of patched kernels crash on my system

Offline

#22 2018-08-23 09:42:22

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Unable to use trackpad on asus fx504

Does the system use a display manager,  or autologin to X,  or should you just be presented with a console after reaching graphical target.

Offline

#23 2018-08-23 11:37:49

seth
Member
Registered: 2012-09-03
Posts: 49,951

Re: Unable to use trackpad on asus fx504

Try to boot the multi-user.target, see https://wiki.archlinux.org/index.php/Sy … _boot_into

Offline

#24 2018-08-23 13:39:59

ComeTOValhllaWithMe
Member
Registered: 2018-08-17
Posts: 23

Re: Unable to use trackpad on asus fx504

@loqs I use lightdm. After following @seth suggestion i was able to get into tty from there I started lightdm manually then logged into my user. But unfortunately trackpad is still not working. Also pulseaudio is unable to detect speakers and headphones in this kernel
Here's my dmesg output if it helps

[    0.000000] microcode: microcode updated early to revision 0x96, date = 2018-05-02
[    0.000000] Linux version 4.18.3-arch1-1-custom (direwolf@wolf) (gcc version 8.2.0 (GCC)) #1 SMP PREEMPT Wed Aug 22 20:06:41 IST 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-custom root=UUID=09ec7c7b-5a14-4175-baf4-65969ce3995e rw systemd.unit=multi-user.target
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000079048fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079049000-0x000000007a4dffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007a4e0000-0x000000007a55cfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007a55d000-0x000000007a648fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007a649000-0x000000007ac40fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007ac41000-0x000000007ad0dfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007ad0e000-0x000000007ad0efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ad0f000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027dffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.60 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0x7a4f9000  ACPI=0x7a4f9000  SMBIOS=0x7aa89000  SMBIOS 3.0=0x7aa88000  ESRT=0x75f10e98  MEMATTR=0x757db018 
[    0.000000] SMBIOS 3.1.1 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. TUF GAMING FX504GD_FX80GD/FX504GD, BIOS FX504GD.312 07/13/2018
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x27e000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7FF0000000 write-combining
[    0.000000]   1 base 0000000000 mask 7F80000000 write-back
[    0.000000]   2 base 007B800000 mask 7FFF800000 uncachable
[    0.000000]   3 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   4 base 0100000000 mask 7F00000000 write-back
[    0.000000]   5 base 0200000000 mask 7F80000000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] last_pfn = 0x7ad0f max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x0000000075f10e98 to 0x0000000075f10ed0.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x26ac76000, 0x26ac76fff] PGTABLE
[    0.000000] BRK [0x26ac77000, 0x26ac77fff] PGTABLE
[    0.000000] BRK [0x26ac78000, 0x26ac78fff] PGTABLE
[    0.000000] BRK [0x26ac79000, 0x26ac79fff] PGTABLE
[    0.000000] BRK [0x26ac7a000, 0x26ac7afff] PGTABLE
[    0.000000] BRK [0x26ac7b000, 0x26ac7bfff] PGTABLE
[    0.000000] BRK [0x26ac7c000, 0x26ac7cfff] PGTABLE
[    0.000000] BRK [0x26ac7d000, 0x26ac7dfff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x36e1f000-0x37706fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007A4F9000 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0x000000007A4F90C0 000104 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007A53A888 000114 (v06 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007A4F9258 041630 (v02 _ASUS_ Notebook 01072009 INTL 20160527)
[    0.000000] ACPI: FACS 0x000000007A648080 000040
[    0.000000] ACPI: APIC 0x000000007A53A9A0 0000BC (v04 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000007A53AA60 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000007A53AAA8 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000007A53AB48 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x000000007A53AB88 000334 (v01 SataRe SataTabl 00001000 INTL 20160527)
[    0.000000] ACPI: SSDT 0x000000007A53AEC0 007117 (v02 DptfTa DptfTabl 00001000 INTL 20160527)
[    0.000000] ACPI: SSDT 0x000000007A541FD8 0017D5 (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
[    0.000000] ACPI: MSDM 0x000000007A5437B0 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001)
[    0.000000] ACPI: SSDT 0x000000007A543808 0031D7 (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
[    0.000000] ACPI: SSDT 0x000000007A5469E0 0022CC (v02 PegSsd PegSsdt  00001000 INTL 20160527)
[    0.000000] ACPI: HPET 0x000000007A548CB0 000038 (v01 INTEL  Notebook 00000002      01000013)
[    0.000000] ACPI: SSDT 0x000000007A548CE8 000F9E (v02 INTEL  Ther_Rvp 00001000 INTL 20160527)
[    0.000000] ACPI: SSDT 0x000000007A549C88 002951 (v02 INTEL  xh_cfhd4 00000000 INTL 20160527)
[    0.000000] ACPI: UEFI 0x000000007A54C5E0 000048 (v01 _ASUS_ Notebook 00000002      01000013)
[    0.000000] ACPI: LPIT 0x000000007A54C628 00005C (v01 INTEL  Notebook 00000002      01000013)
[    0.000000] ACPI: WSMT 0x000000007A54C688 000028 (v01 INTEL  Notebook 00000002      01000013)
[    0.000000] ACPI: SSDT 0x000000007A54C6B0 0027DE (v02 INTEL  PtidDevc 00001000 INTL 20160527)
[    0.000000] ACPI: SSDT 0x000000007A54EE90 000FFE (v02 INTEL  TbtTypeC 00000000 INTL 20160527)
[    0.000000] ACPI: DBGP 0x000000007A54FE90 000034 (v01 _ASUS_ Notebook 00000002      01000013)
[    0.000000] ACPI: DBG2 0x000000007A54FEC8 000054 (v00 _ASUS_ Notebook 00000002      01000013)
[    0.000000] ACPI: SSDT 0x000000007A54FF20 0000AE (v02 SgRef  SgPeg    00001000 INTL 20160527)
[    0.000000] ACPI: DMAR 0x000000007A54FFD0 0000A8 (v01 INTEL  EDK2     00000002      01000013)
[    0.000000] ACPI: BGRT 0x000000007A550078 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: BGRT 0x000000007A5500B0 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: TPM2 0x000000007A5500E8 000034 (v04 _ASUS_ Notebook 00000001 AMI  00000000)
[    0.000000] ACPI: SSDT 0x000000007A550120 001F96 (v01 OptRef OptTabl  00001000 INTL 20160527)
[    0.000000] ACPI: BGRT 0x000000007A5520B8 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027dffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x27dffc000-0x27dffffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027dffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000079048fff]
[    0.000000]   node   0: [mem 0x000000007ad0e000-0x000000007ad0efff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027dffffff]
[    0.000000] Reserved but unavailable: 28696 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027dffffff]
[    0.000000] On node 0 totalpages: 2060264
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 23 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7682 pages used for memmap
[    0.000000]   DMA32 zone: 491594 pages, LIFO batch:31
[    0.000000]   Normal zone: 24448 pages used for memmap
[    0.000000]   Normal zone: 1564672 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x79049000-0x7a4dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a4e0000-0x7a55cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a55d000-0x7a648fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a649000-0x7ac40fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ac41000-0x7ad0dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ad0f000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2028047
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-custom root=UUID=09ec7c7b-5a14-4175-baf4-65969ce3995e rw systemd.unit=multi-user.target
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7938604K/8241056K available (10252K kernel code, 1297K rwdata, 3528K rodata, 1488K init, 612K bss, 302452K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 33392 entries in 131 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: (none).
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180531
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.003333] APIC: Switch to symmetric I/O mode setup
[    0.003333] DMAR: Host address width 39
[    0.003333] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.003333] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.003333] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.003333] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.003333] DMAR: RMRR base: 0x0000007a817000 end: 0x0000007aa60fff
[    0.003333] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[    0.003333] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.003333] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.003333] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.003333] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.003333] x2apic enabled
[    0.003333] Switched APIC routing to cluster x2apic.
[    0.013333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.029999] tsc: Detected 2300.000 MHz processor
[    0.029999] tsc: Detected 2304.000 MHz TSC
[    0.029999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2135f7c97c8, max_idle_ns: 440795273205 ns
[    0.029999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4609.00 BogoMIPS (lpj=7680000)
[    0.029999] pid_max: default: 32768 minimum: 301
[    0.029999] Security Framework initialized
[    0.029999] Yama: becoming mindful.
[    0.029999] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.029999] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.029999] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.029999] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.029999] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.029999] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.029999] mce: CPU supports 10 MCE banks
[    0.029999] CPU0: Thermal monitoring enabled (TM1)
[    0.029999] process: using mwait in idle threads
[    0.029999] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.029999] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.029999] Spectre V2 : Mitigation: Full generic retpoline
[    0.029999] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.029999] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.029999] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.029999] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.029999] Freeing SMP alternatives memory: 28K
[    0.036623] TSC deadline timer enabled
[    0.036633] smpboot: CPU0: Intel(R) Core(TM) i5-8300H CPU @ 2.30GHz (family: 0x6, model: 0x9e, stepping: 0xa)
[    0.053351] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.053412] ... version:                4
[    0.053413] ... bit width:              48
[    0.053413] ... generic registers:      4
[    0.053414] ... value mask:             0000ffffffffffff
[    0.053415] ... max period:             00007fffffffffff
[    0.053415] ... fixed-purpose events:   3
[    0.053416] ... event mask:             000000070000000f
[    0.060008] Hierarchical SRCU implementation.
[    0.080285] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.086674] smp: Bringing up secondary CPUs ...
[    0.126695] x86: Booting SMP configuration:
[    0.126698] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.367269] smp: Brought up 1 node, 8 CPUs
[    0.367269] smpboot: Max logical packages: 1
[    0.367269] smpboot: Total of 8 processors activated (36878.00 BogoMIPS)
[    0.370273] devtmpfs: initialized
[    0.370273] x86/mm: Memory block size: 128MB
[    0.370684] PM: Registering ACPI NVS region [mem 0x7a55d000-0x7a648fff] (966656 bytes)
[    0.370684] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.370684] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.370684] pinctrl core: initialized pinctrl subsystem
[    0.370684] RTC time: 13:35:16, date: 08/23/18
[    0.370684] NET: Registered protocol family 16
[    0.370684] audit: initializing netlink subsys (disabled)
[    0.370684] audit: type=2000 audit(1535031316.369:1): state=initialized audit_enabled=0 res=1
[    0.373356] cpuidle: using governor ladder
[    0.373360] cpuidle: using governor menu
[    0.373360] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.373360] ACPI: bus type PCI registered
[    0.373360] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.373450] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.373452] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.373465] PCI: Using configuration type 1 for base access
[    0.374373] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.374373] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.374373] ACPI: Added _OSI(Module Device)
[    0.374373] ACPI: Added _OSI(Processor Device)
[    0.374373] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.374373] ACPI: Added _OSI(Processor Aggregator Device)
[    0.374373] ACPI: Added _OSI(Linux-Dell-Video)
[    0.445179] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.GPLD], AE_ALREADY_EXISTS (20180531/dswload2-316)
[    0.445190] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180531/psobject-221)
[    0.445213] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180531/psargs-330)
[    0.445220] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445247] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180531/psargs-330)
[    0.445254] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445275] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.REV], AE_NOT_FOUND (20180531/psargs-330)
[    0.445281] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445301] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.REV], AE_NOT_FOUND (20180531/psargs-330)
[    0.445307] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445327] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180531/psargs-330)
[    0.445333] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445354] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.VISI], AE_NOT_FOUND (20180531/psargs-330)
[    0.445360] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445380] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.VISI], AE_NOT_FOUND (20180531/psargs-330)
[    0.445385] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445406] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180531/psargs-330)
[    0.445412] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445433] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.GPOS], AE_NOT_FOUND (20180531/psargs-330)
[    0.445439] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445459] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.GPOS], AE_NOT_FOUND (20180531/psargs-330)
[    0.445465] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445485] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180531/psargs-330)
[    0.445490] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445495] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.TPLD], AE_ALREADY_EXISTS (20180531/dswload2-316)
[    0.445501] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180531/psobject-221)
[    0.445522] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180531/psargs-330)
[    0.445527] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445553] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180531/psargs-330)
[    0.445560] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445582] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.REV], AE_NOT_FOUND (20180531/psargs-330)
[    0.445588] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445608] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.REV], AE_NOT_FOUND (20180531/psargs-330)
[    0.445614] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445635] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180531/psargs-330)
[    0.445641] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445662] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.VISI], AE_NOT_FOUND (20180531/psargs-330)
[    0.445668] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445688] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.VISI], AE_NOT_FOUND (20180531/psargs-330)
[    0.445694] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445714] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180531/psargs-330)
[    0.445720] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445742] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.GPOS], AE_NOT_FOUND (20180531/psargs-330)
[    0.445747] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445767] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.GPOS], AE_NOT_FOUND (20180531/psargs-330)
[    0.445773] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445794] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180531/psargs-330)
[    0.445800] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445821] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.SHAP], AE_NOT_FOUND (20180531/psargs-330)
[    0.445827] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445847] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.SHAP], AE_NOT_FOUND (20180531/psargs-330)
[    0.445853] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445874] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180531/psargs-330)
[    0.445880] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445902] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.WID], AE_NOT_FOUND (20180531/psargs-330)
[    0.445907] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445928] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.WID], AE_NOT_FOUND (20180531/psargs-330)
[    0.445934] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445955] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180531/psargs-330)
[    0.445961] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.445983] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.HGT], AE_NOT_FOUND (20180531/psargs-330)
[    0.445989] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.446009] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.HGT], AE_NOT_FOUND (20180531/psargs-330)
[    0.446015] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.446035] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.XHC.RHUB.PCKG], AE_NOT_FOUND (20180531/psargs-330)
[    0.446041] ACPI Error: Ignore error and continue table load (20180531/psobject-604)
[    0.446046] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0.XHC.RHUB.GUPC], AE_ALREADY_EXISTS (20180531/dswload2-316)
[    0.446052] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180531/psobject-221)
[    0.448828] ACPI: 12 ACPI AML tables successfully acquired and loaded
[    0.470859] ACPI: Dynamic OEM Table Load:
[    0.470859] ACPI: SSDT 0xFFFF93C1B3F99800 0005DF (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.471149] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.471699] ACPI: Dynamic OEM Table Load:
[    0.471706] ACPI: SSDT 0xFFFF93C1B3AE7800 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.474031] ACPI: Dynamic OEM Table Load:
[    0.474040] ACPI: SSDT 0xFFFF93C1B3A66000 000EF1 (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.476974] ACPI: Dynamic OEM Table Load:
[    0.476980] ACPI: SSDT 0xFFFF93C1B3AE5C00 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.480461] ACPI: EC: EC started
[    0.480462] ACPI: EC: interrupt blocked
[    0.480584] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.480587] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x37, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.480588] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.480589] ACPI: Interpreter enabled
[    0.480641] ACPI: (supports S0 S3 S4 S5)
[    0.480642] ACPI: Using IOAPIC for interrupt routing
[    0.480689] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.482541] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.486092] ACPI: Power Resource [PG00] (on)
[    0.526302] ACPI: Power Resource [USBC] (on)
[    0.531048] ACPI: Power Resource [V0PR] (on)
[    0.531328] ACPI: Power Resource [V1PR] (on)
[    0.531597] ACPI: Power Resource [V2PR] (on)
[    0.548450] ACPI: Power Resource [WRST] (on)
[    0.556207] ACPI: Power Resource [FN00] (off)
[    0.556338] ACPI: Power Resource [FN01] (off)
[    0.556462] ACPI: Power Resource [FN02] (off)
[    0.556588] ACPI: Power Resource [FN03] (off)
[    0.556719] ACPI: Power Resource [FN04] (off)
[    0.557734] ACPI: Power Resource [PIN] (off)
[    0.558388] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.558395] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.558680] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.558949] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[    0.558950] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.560149] PCI host bridge to bus 0000:00
[    0.560152] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.560154] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.560155] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.560156] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.560158] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.560160] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.560162] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.560164] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.560165] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.560167] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.560168] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.560177] pci 0000:00:00.0: [8086:3e10] type 00 class 0x060000
[    0.560713] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.560763] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.561075] pci 0000:00:02.0: [8086:3e9b] type 00 class 0x030000
[    0.561087] pci 0000:00:02.0: reg 0x10: [mem 0xa2000000-0xa2ffffff 64bit]
[    0.561093] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.561098] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.561116] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.561308] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.561321] pci 0000:00:04.0: reg 0x10: [mem 0xa4310000-0xa4317fff 64bit]
[    0.561576] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.561588] pci 0000:00:08.0: reg 0x10: [mem 0xa432b000-0xa432bfff 64bit]
[    0.561865] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[    0.561912] pci 0000:00:12.0: reg 0x10: [mem 0xa432a000-0xa432afff 64bit]
[    0.562298] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[    0.562344] pci 0000:00:14.0: reg 0x10: [mem 0xa4300000-0xa430ffff 64bit]
[    0.562493] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.562768] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[    0.562806] pci 0000:00:14.2: reg 0x10: [mem 0xa4322000-0xa4323fff 64bit]
[    0.562826] pci 0000:00:14.2: reg 0x18: [mem 0xa4329000-0xa4329fff 64bit]
[    0.563130] pci 0000:00:14.3: [8086:a370] type 00 class 0x028000
[    0.563307] pci 0000:00:14.3: reg 0x10: [mem 0xa431c000-0xa431ffff 64bit]
[    0.563888] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.564495] pci 0000:00:15.0: [8086:a368] type 00 class 0x0c8000
[    0.565223] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.567780] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[    0.567825] pci 0000:00:16.0: reg 0x10: [mem 0xa4327000-0xa4327fff 64bit]
[    0.567954] pci 0000:00:16.0: PME# supported from D3hot
[    0.568306] pci 0000:00:17.0: [8086:a353] type 00 class 0x010601
[    0.568345] pci 0000:00:17.0: reg 0x10: [mem 0xa4320000-0xa4321fff]
[    0.568362] pci 0000:00:17.0: reg 0x14: [mem 0xa4326000-0xa43260ff]
[    0.568378] pci 0000:00:17.0: reg 0x18: [io  0x5090-0x5097]
[    0.568394] pci 0000:00:17.0: reg 0x1c: [io  0x5080-0x5083]
[    0.568410] pci 0000:00:17.0: reg 0x20: [io  0x5060-0x507f]
[    0.568426] pci 0000:00:17.0: reg 0x24: [mem 0xa4325000-0xa43257ff]
[    0.568516] pci 0000:00:17.0: PME# supported from D3hot
[    0.568867] pci 0000:00:1d.0: [8086:a336] type 01 class 0x060400
[    0.569083] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.569130] pci 0000:00:1d.0: PTM enabled (root), 4dns granularity
[    0.569492] pci 0000:00:1f.0: [8086:a30d] type 00 class 0x060100
[    0.569978] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[    0.570058] pci 0000:00:1f.3: reg 0x10: [mem 0xa4318000-0xa431bfff 64bit]
[    0.570133] pci 0000:00:1f.3: reg 0x20: [mem 0xa4100000-0xa41fffff 64bit]
[    0.570288] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.570704] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[    0.570886] pci 0000:00:1f.4: reg 0x10: [mem 0xa4324000-0xa43240ff 64bit]
[    0.571111] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.571548] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[    0.571578] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.571878] pci 0000:01:00.0: [10de:1c8d] type 00 class 0x030200
[    0.571893] pci 0000:01:00.0: reg 0x10: [mem 0xa3000000-0xa3ffffff]
[    0.571902] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.571910] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
[    0.571916] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.571922] pci 0000:01:00.0: reg 0x30: [mem 0xa4000000-0xa407ffff pref]
[    0.572146] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.572148] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.572151] pci 0000:00:01.0:   bridge window [mem 0xa3000000-0xa40fffff]
[    0.572154] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.572300] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.572344] pci 0000:02:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.572384] pci 0000:02:00.0: reg 0x18: [mem 0xa4204000-0xa4204fff 64bit]
[    0.572409] pci 0000:02:00.0: reg 0x20: [mem 0xa4200000-0xa4203fff 64bit]
[    0.572556] pci 0000:02:00.0: supports D1 D2
[    0.572557] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.572762] pci 0000:00:1d.0: PCI bridge to [bus 02]
[    0.572767] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.572773] pci 0000:00:1d.0:   bridge window [mem 0xa4200000-0xa42fffff]
[    0.575353] ACPI: PCI Interrupt Link [LNKA] (IRQs) *0
[    0.575404] ACPI: PCI Interrupt Link [LNKB] (IRQs) *1
[    0.575453] ACPI: PCI Interrupt Link [LNKC] (IRQs) *0
[    0.575501] ACPI: PCI Interrupt Link [LNKD] (IRQs) *0
[    0.575549] ACPI: PCI Interrupt Link [LNKE] (IRQs) *0
[    0.575598] ACPI: PCI Interrupt Link [LNKF] (IRQs) *0
[    0.575645] ACPI: PCI Interrupt Link [LNKG] (IRQs) *0
[    0.575695] ACPI: PCI Interrupt Link [LNKH] (IRQs) *0
[    0.580001] ACPI: EC: interrupt unblocked
[    0.580001] ACPI: EC: event unblocked
[    0.580001] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x37, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.580001] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.580007] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.580009] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.580013] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.580013] vgaarb: loaded
[    0.580148] pps_core: LinuxPPS API ver. 1 registered
[    0.580148] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.580150] PTP clock support registered
[    0.580156] EDAC MC: Ver: 3.0.0
[    0.580355] Registered efivars operations
[    0.600303] PCI: Using ACPI for IRQ routing
[    0.683536] PCI: pci_cache_line_size set to 64 bytes
[    0.683717] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.683719] e820: reserve RAM buffer [mem 0x79049000-0x7bffffff]
[    0.683720] e820: reserve RAM buffer [mem 0x7ad0f000-0x7bffffff]
[    0.683721] e820: reserve RAM buffer [mem 0x27e000000-0x27fffffff]
[    0.683811] NetLabel: Initializing
[    0.683811] NetLabel:  domain hash size = 128
[    0.683812] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.683825] NetLabel:  unlabeled traffic allowed by default
[    0.687146] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.687152] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.689243] clocksource: Switched to clocksource tsc-early
[    0.696769] VFS: Disk quotas dquot_6.6.0
[    0.696785] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.696843] pnp: PnP ACPI init
[    0.697112] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.697115] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.697120] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.697142] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.697268] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.697272] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.697344] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.697590] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.697592] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.697594] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.697595] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.697597] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.697599] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.697600] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.697602] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.697606] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.697919] system 00:05: [io  0x1800-0x18fe] could not be reserved
[    0.697921] system 00:05: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.697923] system 00:05: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[    0.697924] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.697926] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.697928] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.697930] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.697933] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.698359] system 00:06: [io  0x2000-0x20fe] has been reserved
[    0.698363] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.699925] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.701320] pnp: PnP ACPI: found 8 devices
[    0.707011] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.707046] pci 0000:00:15.0: BAR 0: assigned [mem 0xa4328000-0xa4328fff 64bit]
[    0.707320] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.707322] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.707325] pci 0000:00:01.0:   bridge window [mem 0xa3000000-0xa40fffff]
[    0.707328] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.707332] pci 0000:00:1d.0: PCI bridge to [bus 02]
[    0.707339] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.707347] pci 0000:00:1d.0:   bridge window [mem 0xa4200000-0xa42fffff]
[    0.707362] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.707364] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.707365] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.707367] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000e3fff window]
[    0.707368] pci_bus 0000:00: resource 8 [mem 0x000e4000-0x000e7fff window]
[    0.707370] pci_bus 0000:00: resource 9 [mem 0x000e8000-0x000ebfff window]
[    0.707371] pci_bus 0000:00: resource 10 [mem 0x000ec000-0x000effff window]
[    0.707372] pci_bus 0000:00: resource 11 [mem 0x000f0000-0x000fffff window]
[    0.707374] pci_bus 0000:00: resource 12 [mem 0x80000000-0xdfffffff window]
[    0.707375] pci_bus 0000:00: resource 13 [mem 0xfc800000-0xfe7fffff window]
[    0.707377] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.707378] pci_bus 0000:01: resource 1 [mem 0xa3000000-0xa40fffff]
[    0.707379] pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.707381] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.707382] pci_bus 0000:02: resource 1 [mem 0xa4200000-0xa42fffff]
[    0.707606] NET: Registered protocol family 2
[    0.707727] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.707758] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.707859] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.707990] TCP: Hash tables configured (established 65536 bind 65536)
[    0.708020] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.708045] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.708098] NET: Registered protocol family 1
[    0.708102] NET: Registered protocol family 44
[    0.708112] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.708256] PCI: CLS 64 bytes, default 64
[    0.708287] Unpacking initramfs...
[    0.832019] Freeing initrd memory: 9120K
[    0.832057] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.832060] software IO TLB [mem 0x717db000-0x757db000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[    0.832085] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135f7c97c8, max_idle_ns: 440795273205 ns
[    0.832108] clocksource: Switched to clocksource tsc
[    0.832252] Scanning for low memory corruption every 60 seconds
[    0.832821] Initialise system trusted keyrings
[    0.832828] Key type blacklist registered
[    0.832873] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.834030] zbud: loaded
[    0.834344] pstore: using lz4hc compression
[    0.835435] Key type asymmetric registered
[    0.835436] Asymmetric key parser 'x509' registered
[    0.835466] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.835501] io scheduler noop registered
[    0.835502] io scheduler deadline registered
[    0.835539] io scheduler cfq registered (default)
[    0.835540] io scheduler mq-deadline registered
[    0.835541] io scheduler kyber registered
[    0.835560] io scheduler bfq registered
[    0.836620] pcieport 0000:00:1d.0: AER enabled with IRQ 122
[    0.836651] dpc 0000:00:1d.0:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.836675] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.836738] efifb: probing for efifb
[    0.836747] efifb: framebuffer at 0x80000000, using 1920k, total 1920k
[    0.836748] efifb: mode is 800x600x32, linelength=3200, pages=1
[    0.836749] efifb: scrolling: redraw
[    0.836750] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.837777] Console: switching to colour frame buffer device 100x37
[    0.838725] fb0: EFI VGA frame buffer device
[    0.838733] intel_idle: MWAIT substates: 0x11142120
[    0.838734] intel_idle: v0.4.1 model 0x9E
[    0.839121] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.839200] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.839208] ACPI: Sleep Button [SLPB]
[    0.839238] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.839245] ACPI: Power Button [PWRB]
[    0.839276] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.839285] ACPI: Lid Switch [LID0]
[    0.839317] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.839323] ACPI: Power Button [PWRF]
[    0.892112] ACPI: Invalid active0 threshold
[    0.892407] thermal LNXTHERM:00: registered as thermal_zone0
[    0.892408] ACPI: Thermal Zone [THRM] (53 C)
[    0.940395] thermal LNXTHERM:01: registered as thermal_zone1
[    0.940397] ACPI: Thermal Zone [TZ00] (28 C)
[    0.940686] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.942742] intel_pstate: Intel P-state driver initializing
[    0.942791] intel_pstate: Disabling energy efficiency optimization
[    0.943276] intel_pstate: HWP enabled
[    0.943603] ledtrig-cpu: registered to indicate activity on CPUs
[    0.943650] intel_pmc_core:  initialized
[    0.943897] NET: Registered protocol family 10
[    0.949034] Segment Routing with IPv6
[    0.949064] NET: Registered protocol family 17
[    0.950174] RAS: Correctable Errors collector initialized.
[    0.950252] microcode: sig=0x906ea, pf=0x20, revision=0x96
[    0.950516] microcode: Microcode Update Driver: v2.2.
[    0.950527] sched_clock: Marking stable (950508225, 0)->(934697519, 15810706)
[    0.951321] registered taskstats version 1
[    0.951332] Loading compiled-in X.509 certificates
[    0.951354] zswap: loaded using pool lzo/zbud
[    0.956696] Key type big_key registered
[    0.959143]   Magic number: 14:149:585
[    0.959232] hctosys: unable to open rtc device (rtc0)
[    0.961969] Freeing unused kernel memory: 1488K
[    0.961972] Write protecting the kernel read-only data: 16384k
[    0.962687] Freeing unused kernel memory: 2016K
[    0.963387] Freeing unused kernel memory: 568K
[    1.053016] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.053017] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.054481] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.061737] ACPI: bus type USB registered
[    1.061758] usbcore: registered new interface driver usbfs
[    1.061767] usbcore: registered new interface driver hub
[    1.061802] usbcore: registered new device driver usb
[    1.063667] SCSI subsystem initialized
[    1.067958] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.067962] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.068032] libata version 3.00 loaded.
[    1.069052] ahci 0000:00:17.0: version 3.0
[    1.069079] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x110 quirks 0x0000000000009810
[    1.069086] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.069330] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    1.069332] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.069333] usb usb1: Product: xHCI Host Controller
[    1.069334] usb usb1: Manufacturer: Linux 4.18.3-arch1-1-custom xhci-hcd
[    1.069335] usb usb1: SerialNumber: 0000:00:14.0
[    1.069415] hub 1-0:1.0: USB hub found
[    1.069434] hub 1-0:1.0: 16 ports detected
[    1.070681] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.070683] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.070685] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.070719] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[    1.070720] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.070721] usb usb2: Product: xHCI Host Controller
[    1.070722] usb usb2: Manufacturer: Linux 4.18.3-arch1-1-custom xhci-hcd
[    1.070723] usb usb2: SerialNumber: 0000:00:14.0
[    1.070802] hub 2-0:1.0: USB hub found
[    1.070825] hub 2-0:1.0: 8 ports detected
[    1.071145] usb: port power management may be unreliable
[    1.075331] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.079583] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x10 impl SATA mode
[    1.079585] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst 
[    1.080179] scsi host0: ahci
[    1.080431] scsi host1: ahci
[    1.080505] scsi host2: ahci
[    1.080664] scsi host3: ahci
[    1.080859] scsi host4: ahci
[    1.080890] ata1: DUMMY
[    1.080891] ata2: DUMMY
[    1.080891] ata3: DUMMY
[    1.080892] ata4: DUMMY
[    1.080897] ata5: SATA max UDMA/133 abar m2048@0xa4325000 port 0xa4325300 irq 124
[    1.394283] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.400076] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[    1.468431] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.468436] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.468440] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.543864] usb 1-1: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[    1.543868] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.543871] usb 1-1: Product: USB Optical Mouse
[    1.543874] usb 1-1: Manufacturer: PixArt
[    1.549063] ata5.00: ATA-10: ST1000LX015-1U7172, SDM1, max UDMA/133
[    1.549067] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.549249] hidraw: raw HID events driver (C) Jiri Kosina
[    1.552738] usbcore: registered new interface driver usbhid
[    1.552738] usbhid: USB HID core driver
[    1.553348] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:093A:2510.0001/input/input5
[    1.553402] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-1/input0
[    1.611382] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.611387] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.611392] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.666742] usb 1-7: new high-speed USB device number 3 using xhci_hcd
[    1.691994] ata5.00: configured for UDMA/133
[    1.692323] scsi 4:0:0:0: Direct-Access     ATA      ST1000LX015-1U71 SDM1 PQ: 0 ANSI: 5
[    1.701753] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.701759] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    1.701794] sd 4:0:0:0: [sda] Write Protect is off
[    1.701798] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.701846] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.705038]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[    1.705805] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.838247] usb 1-7: New USB device found, idVendor=13d3, idProduct=5666, bcdDevice= 3.22
[    1.838252] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.838256] usb 1-7: Product: USB2.0 HD UVC WebCam
[    1.838259] usb 1-7: Manufacturer: Azurewave
[    1.838262] usb 1-7: SerialNumber: NULL
[    1.932713] random: fast init done
[    1.963417] usb 1-14: new full-speed USB device number 4 using xhci_hcd
[    2.105041] usb 1-14: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
[    2.105046] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.219179] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    2.569017] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    2.584128] systemd[1]: Detected architecture x86-64.
[    2.591090] systemd[1]: Set hostname to <wolf>.
[    2.787157] random: systemd: uninitialized urandom read (16 bytes read)
[    2.787184] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.787586] random: systemd: uninitialized urandom read (16 bytes read)
[    2.787638] systemd[1]: Listening on Journal Socket.
[    2.787994] random: systemd: uninitialized urandom read (16 bytes read)
[    2.788016] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.788374] systemd[1]: Reached target Remote File Systems.
[    2.788746] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.789127] systemd[1]: Listening on Journal Audit Socket.
[    2.791589] systemd[1]: Mounting Huge Pages File System...
[    2.849735] EXT4-fs (sda7): re-mounted. Opts: (null)
[    2.891463] systemd-journald[257]: Received request to flush runtime journal from PID 1
[    2.912988] systemd-journald[257]: File /var/log/journal/e95fc87b4b4d45d89b319b4d8b607e61/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    3.331163] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input6
[    3.333005] ACPI: AC Adapter [ACAD] (on-line)
[    3.334048] ACPI: Battery Slot [BAT1] (battery present)
[    3.361531] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[    3.365471] tpm tpm0: A TPM error (378) occurred get tpm pcr allocation
[    3.371060] rtc_cmos 00:01: RTC can wake from S4
[    3.372115] rtc_cmos 00:01: registered as rtc0
[    3.372126] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    3.451563] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    3.481527] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    3.482280] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    3.482678] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    3.482765] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    3.489341] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    3.500580] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    3.503227] cannonlake-pinctrl INT3450:00: pin 225 cannot be used as IRQ
[    3.503231] genirq: Setting trigger mode 8 for irq 126 failed (intel_gpio_irq_type+0x0/0x140)
[    3.503927] i2c_hid i2c-ELAN1200:00: i2c-ELAN1200:00 supply vdd not found, using dummy regulator
[    3.504284] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    3.504285] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.504286] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.504287] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.504288] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.504288] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    3.505329] cannonlake-pinctrl INT3450:00: pin 225 cannot be used as IRQ
[    3.505333] genirq: Setting trigger mode 8 for irq 126 failed (intel_gpio_irq_type+0x0/0x140)
[    3.505773] i2c_hid i2c-ELAN1200:00: Could not register for ELAN1200:00 interrupt, irq = 126, ret = -1
[    3.505797] i2c_hid: probe of i2c-ELAN1200:00 failed with error -1
[    3.505986] media: Linux media interface: v0.10
[    3.517416] videodev: Linux video capture interface: v2.00
[    3.537367] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.537375] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.537635] asus_wmi: ASUS WMI generic driver loaded
[    3.538453] asus_wmi: Initialization: 0x1
[    3.538546] asus_wmi: BIOS WMI version: 8.1
[    3.538628] asus_wmi: SFUN value: 0x4a0061
[    3.539440] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input8
[    3.540013] asus_wmi: Number of fans: 1
[    3.547785] r8169 0000:02:00.0 eth0: RTL8168h/8111h, 0c:9d:92:58:2e:32, XID 54100800, IRQ 127
[    3.547787] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.562640] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.566970] Bluetooth: Core ver 2.22
[    3.566991] NET: Registered protocol family 31
[    3.566992] Bluetooth: HCI device and connection manager initialized
[    3.566995] Bluetooth: HCI socket layer initialized
[    3.566997] Bluetooth: L2CAP socket layer initialized
[    3.567003] Bluetooth: SCO socket layer initialized
[    3.569512] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.655396] mousedev: PS/2 mouse device common for all mice
[    3.675851] usbcore: registered new interface driver btusb
[    3.676426] Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
[    3.677423] Bluetooth: hci0: Device revision is 2
[    3.677424] Bluetooth: hci0: Secure boot is enabled
[    3.677425] Bluetooth: hci0: OTP lock is enabled
[    3.677426] Bluetooth: hci0: API lock is enabled
[    3.677427] Bluetooth: hci0: Debug lock is disabled
[    3.677429] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    3.694366] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    3.705771] iTCO_vendor_support: vendor-support=0
[    3.707135] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.707170] iTCO_wdt iTCO_wdt: can't request region for resource [mem 0x00c5fffc-0x00c5ffff]
[    3.708116] iTCO_wdt: probe of iTCO_wdt failed with error -16
[    3.719822] Linux agpgart interface v0.103
[    3.760535] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (13d3:5666)
[    3.769158] uvcvideo 1-7:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
[    3.769163] uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not initialized!
[    3.769166] uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not initialized!
[    3.769169] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
[    3.769299] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input9
[    3.769428] usbcore: registered new interface driver uvcvideo
[    3.769429] USB Video Class driver (1.1.1)
[    3.772144] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.772150] cfg80211: failed to load regulatory.db
[    3.785010] Bluetooth: hci0: Found device firmware: intel/ibt-17-16-1.sfi
[    3.818336] cryptd: max_cpu_qlen set to 1000
[    3.834559] random: crng init done
[    3.834564] random: 7 urandom warning(s) missed due to ratelimiting
[    3.894666] Adding 4194300k swap on /dev/sda6.  Priority:-2 extents:1 across:4194300k FS
[    3.906213] Intel(R) Wireless WiFi driver for Linux
[    3.906215] Copyright(c) 2003- 2015 Intel Corporation
[    3.906311] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[    3.945351] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    3.946522] AVX2 version of gcm_enc/dec engaged.
[    3.946524] AES CTR mode by8 optimization enabled
[    4.007167] iwlwifi 0000:00:14.3: loaded firmware version 38.c0e03d94.0 op_mode iwlmvm
[    4.121951] checking generic (80000000 1e0000) vs hw (80000000 10000000)
[    4.121953] fb: switching to inteldrmfb from EFI VGA
[    4.121971] Console: switching to colour dummy device 80x25
[    4.122060] [drm] Replacing VGA console driver
[    4.122694] iwlwifi 0000:00:14.3: Detected Intel(R) Dual Band Wireless AC 9560, REV=0x318
[    4.124294] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.124296] [drm] Driver supports precise vblank timestamp query.
[    4.125060] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.125847] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    4.137451] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    4.145431] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[    4.148165] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.148518] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[    4.148614] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    4.148653] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:01/input/input11
[    4.148823] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.156510] fbcon: inteldrmfb (fb0) is primary device
[    4.173741] iwlwifi 0000:00:14.3: base HW address: 30:24:32:a7:0c:29
[    4.190503] intel_rapl: Found RAPL domain package
[    4.190505] intel_rapl: Found RAPL domain core
[    4.190506] intel_rapl: Found RAPL domain uncore
[    4.190507] intel_rapl: Found RAPL domain dram
[    4.249877] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    4.250041] thermal thermal_zone6: failed to read out thermal zone (-61)
[    4.251604] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0
[    5.080575] Bluetooth: hci0: Waiting for firmware download to complete
[    5.081405] Bluetooth: hci0: Firmware loaded in 1372579 usecs
[    5.081499] Bluetooth: hci0: Waiting for device to boot
[    5.094520] Bluetooth: hci0: Device booted in 12743 usecs
[    5.094801] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
[    5.099511] Bluetooth: hci0: Applying Intel DDC parameters completed
[    5.462354] Console: switching to colour frame buffer device 240x67
[    5.485539] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.545942] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    5.545944] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.545945] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    5.545946] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    5.545947] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.545948] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12
[    5.820734] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    5.820764] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    5.820789] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    5.820813] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    5.820837] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    5.820860] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    6.067828] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    6.122828] r8169 0000:02:00.0 enp2s0: link down
[    6.122934] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    6.126114] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    6.322675] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    6.534559] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    6.662723] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    9.937488] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   10.642350] wlo1: authenticate with c8:3a:35:53:19:d8
[   10.651283] wlo1: send auth to c8:3a:35:53:19:d8 (try 1/3)
[   10.688712] wlo1: authenticated
[   10.690107] wlo1: associate with c8:3a:35:53:19:d8 (try 1/3)
[   10.693524] wlo1: RX AssocResp from c8:3a:35:53:19:d8 (capab=0x411 status=0 aid=1)
[   10.696145] wlo1: associated
[   10.728942] iwlwifi 0000:00:14.3: Unhandled alg: 0x707
[   11.728816] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[   21.926197] audit: type=1006 audit(1535031337.922:2): pid=435 uid=0 old-auid=4294967295 auid=1001 tty=tty1 old-ses=4294967295 ses=1 res=1
[   21.944972] audit: type=1006 audit(1535031337.942:3): pid=510 uid=0 old-auid=4294967295 auid=1001 tty=(none) old-ses=4294967295 ses=2 res=1

Last edited by ComeTOValhllaWithMe (2018-08-23 13:54:04)

Offline

#25 2018-08-23 14:35:27

loqs
Member
Registered: 2014-03-06
Posts: 17,192

Re: Unable to use trackpad on asus fx504

If you change into the pkgbuild directory then src/linux then what is the output of `git diff`?

Offline

Board footer

Powered by FluxBB