Arch Linux

xrxr

Member

Registered: 2015-08-01

Posts: 14

[SOLVED] Starting Xorg hangs when using mesa 18.* on Ryzen 2400g

I upgraded to mesa-18.1.6-1 recently and it causes startx to hang. The only thing I can do when it hangs is using sysrq.
If I downgrade to mesa-17.3.7-1, then startx works fine.
This doesn't seem to be a kernel issue because it happens on both 4.17 and 4.18.
Looking at X's logs, the hang seems to happen after it loads glamoregl.
I've tried to tell xorg to not load glamoregl, but without it Xorg isn't able to find my screen...
The new amdgpu driver and mesa 18.* don't seem to like each other.

[    54.156] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[    54.157] 
X.Org X Server 1.20.1
X Protocol Version 11, Revision 0
[    54.157] Build Operating System: Linux Arch Linux
[    54.157] Current Operating System: Linux loop_back 4.17.14-arch1-1-ARCH #1 SMP PREEMPT Thu Aug 9 11:56:50 UTC 2018 x86_64
[    54.157] Kernel command line: root=UUID=6f93dbf4-ec0b-4800-947a-b4d2bad4b9e0 rw initrd=/EFI/Arch/initramfs-linux.img
[    54.157] Build Date: 09 August 2018  06:37:34PM
[    54.157]  
[    54.157] Current version of pixman: 0.34.0
[    54.157] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    54.157] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    54.157] (==) Log file: "/home/alan/.local/share/xorg/Xorg.0.log", Time: Sun Aug 19 22:56:00 2018
[    54.158] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    54.158] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    54.158] (==) No Layout section.  Using the first Screen section.
[    54.158] (==) No screen section available. Using defaults.
[    54.158] (**) |-->Screen "Default Screen Section" (0)
[    54.158] (**) |   |-->Monitor "<default monitor>"
[    54.158] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    54.159] (==) Automatically adding devices
[    54.159] (==) Automatically enabling devices
[    54.159] (==) Automatically adding GPU devices
[    54.159] (==) Automatically binding GPU devices
[    54.159] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    54.161] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    54.161] (==) ModulePath set to "/usr/lib/xorg/modules"
[    54.161] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    54.161] (II) Module ABI versions:
[    54.161] 	X.Org ANSI C Emulation: 0.4
[    54.161] 	X.Org Video Driver: 24.0
[    54.161] 	X.Org XInput driver : 24.1
[    54.161] 	X.Org Server Extension : 10.0
[    54.161] (++) using VT number 1

[    54.162] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[    54.163] (II) xfree86: Adding drm device (/dev/dri/card0)
[    54.163] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[    54.165] (--) PCI:*(56@0:0:0) 1002:15dd:1462:7a40 rev 198, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xfe400000/524288, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[    54.165] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    54.165] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    54.165] (II) "glx" will be loaded by default.
[    54.165] (II) LoadModule: "glx"
[    54.166] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    54.167] (II) Module glx: vendor="X.Org Foundation"
[    54.167] 	compiled for 1.20.1, module version = 1.0.0
[    54.167] 	ABI class: X.Org Server Extension, version 10.0
[    54.167] (==) Matched ati as autoconfigured driver 0
[    54.167] (==) Matched modesetting as autoconfigured driver 1
[    54.167] (==) Matched fbdev as autoconfigured driver 2
[    54.167] (==) Matched vesa as autoconfigured driver 3
[    54.167] (==) Assigned the driver to the xf86ConfigLayout
[    54.167] (II) LoadModule: "ati"
[    54.168] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    54.168] (II) Module ati: vendor="X.Org Foundation"
[    54.168] 	compiled for 1.20.0, module version = 18.0.1
[    54.168] 	Module class: X.Org Video Driver
[    54.168] 	ABI class: X.Org Video Driver, version 24.0
[    54.168] (II) LoadModule: "amdgpu"
[    54.168] (WW) Warning, couldn't open module amdgpu
[    54.168] (EE) Failed to load module "amdgpu" (module does not exist, 0)
[    54.168] (II) LoadModule: "modesetting"
[    54.168] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    54.169] (II) Module modesetting: vendor="X.Org Foundation"
[    54.169] 	compiled for 1.20.1, module version = 1.20.1
[    54.169] 	Module class: X.Org Video Driver
[    54.169] 	ABI class: X.Org Video Driver, version 24.0
[    54.169] (II) LoadModule: "fbdev"
[    54.169] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    54.169] (II) Module fbdev: vendor="X.Org Foundation"
[    54.169] 	compiled for 1.20.0, module version = 0.5.0
[    54.169] 	Module class: X.Org Video Driver
[    54.169] 	ABI class: X.Org Video Driver, version 24.0
[    54.169] (II) LoadModule: "vesa"
[    54.169] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    54.169] (II) Module vesa: vendor="X.Org Foundation"
[    54.169] 	compiled for 1.20.0, module version = 2.4.0
[    54.169] 	Module class: X.Org Video Driver
[    54.169] 	ABI class: X.Org Video Driver, version 24.0
[    54.169] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    54.169] (II) FBDEV: driver for framebuffer: fbdev
[    54.169] (II) VESA: driver for VESA chipsets: vesa
[    54.170] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    54.170] (II) modeset(0): using drv /dev/dri/card0
[    54.170] (WW) Falling back to old probe method for fbdev
[    54.170] (II) Loading sub module "fbdevhw"
[    54.170] (II) LoadModule: "fbdevhw"
[    54.170] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    54.170] (II) Module fbdevhw: vendor="X.Org Foundation"
[    54.170] 	compiled for 1.20.1, module version = 0.0.2
[    54.170] 	ABI class: X.Org Video Driver, version 24.0
[    54.170] (EE) open /dev/fb0: Permission denied
[    54.170] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    54.170] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    54.170] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    54.170] (==) modeset(0): RGB weight 888
[    54.170] (==) modeset(0): Default visual is TrueColor
[    54.170] (II) Loading sub module "glamoregl"
[    54.170] (II) LoadModule: "glamoregl"
[    54.170] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    54.173] (II) Module glamoregl: vendor="X.Org Foundation"
[    54.173] 	compiled for 1.20.1, module version = 1.0.1
[    54.173] 	ABI class: X.Org ANSI C Emulation, version 0.4

Last edited by xrxr (2018-08-23 18:11:53)

seth

Member

From: Won't reply 2 private help req

Registered: 2012-09-03

Posts: 77,854

Re: [SOLVED] Starting Xorg hangs when using mesa 18.* on Ryzen 2400g

To get a better idea of the problem, remove xf86-video-ati (and check "lsmod | grep -E '(radeon|amdgpu)'")

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

xrxr

Member

Registered: 2015-08-01

Posts: 14

Re: [SOLVED] Starting Xorg hangs when using mesa 18.* on Ryzen 2400g

Removing xf86-video-ati didn't help.

[~]# lsmod | grep -E '(radeon|amdgpu)'
amdgpu               3362816  20
chash                  16384  1 amdgpu
gpu_sched              28672  1 amdgpu
i2c_algo_bit           16384  1 amdgpu
ttm                   126976  1 amdgpu
drm_kms_helper        200704  1 amdgpu
drm                   479232  9 gpu_sched,drm_kms_helper,amdgpu,ttm
[~]# cat /var/log/Xorg.0.log.old 
[   197.083] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[   197.084] 
X.Org X Server 1.20.1
X Protocol Version 11, Revision 0
[   197.085] Build Operating System: Linux Arch Linux
[   197.086] Current Operating System: Linux loop_back 4.18.3-arch1-1-ARCH #1 SMP PREEMPT Sat Aug 18 09:22:54 UTC 2018 x86_64
[   197.086] Kernel command line: root=UUID=6f93dbf4-ec0b-4800-947a-b4d2bad4b9e0 rw initrd=/EFI/Arch/initramfs-linux.img debug ignore_loglevel sysrq_always_enabled=1
[   197.087] Build Date: 09 August 2018  06:37:34PM
[   197.088]  
[   197.088] Current version of pixman: 0.34.0
[   197.089] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   197.089] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   197.091] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 21 15:48:45 2018
[   197.093] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   197.093] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   197.093] (==) No Layout section.  Using the first Screen section.
[   197.094] (==) No screen section available. Using defaults.
[   197.094] (**) |-->Screen "Default Screen Section" (0)
[   197.094] (**) |   |-->Monitor "<default monitor>"
[   197.094] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   197.094] (==) Automatically adding devices
[   197.094] (==) Automatically enabling devices
[   197.094] (==) Automatically adding GPU devices
[   197.094] (==) Automatically binding GPU devices
[   197.094] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   197.096] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[   197.096] (==) ModulePath set to "/usr/lib/xorg/modules"
[   197.096] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   197.096] (II) Module ABI versions:
[   197.096] 	X.Org ANSI C Emulation: 0.4
[   197.096] 	X.Org Video Driver: 24.0
[   197.096] 	X.Org XInput driver : 24.1
[   197.096] 	X.Org Server Extension : 10.0
[   197.096] (++) using VT number 1

[   197.098] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[   197.098] (II) xfree86: Adding drm device (/dev/dri/card0)
[   197.099] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[   197.101] (--) PCI:*(56@0:0:0) 1002:15dd:1462:7a40 rev 198, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xfe400000/524288, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[   197.101] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   197.101] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[   197.101] (WW) "vesa" will not be loaded unless you've specified it to be loaded elsewhere.
[   197.101] (WW) "fbdev" will not be loaded unless you've specified it to be loaded elsewhere.
[   197.101] (II) "glx" will be loaded by default.
[   197.101] (II) LoadModule: "glx"
[   197.102] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   197.103] (II) Module glx: vendor="X.Org Foundation"
[   197.103] 	compiled for 1.20.1, module version = 1.0.0
[   197.103] 	ABI class: X.Org Server Extension, version 10.0
[   197.103] (==) Matched ati as autoconfigured driver 0
[   197.103] (==) Matched modesetting as autoconfigured driver 1
[   197.103] (==) Matched fbdev as autoconfigured driver 2
[   197.103] (==) Matched vesa as autoconfigured driver 3
[   197.103] (==) Assigned the driver to the xf86ConfigLayout
[   197.103] (II) LoadModule: "ati"
[   197.103] (WW) Warning, couldn't open module ati
[   197.103] (EE) Failed to load module "ati" (module does not exist, 0)
[   197.103] (II) LoadModule: "modesetting"
[   197.103] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   197.104] (II) Module modesetting: vendor="X.Org Foundation"
[   197.104] 	compiled for 1.20.1, module version = 1.20.1
[   197.104] 	Module class: X.Org Video Driver
[   197.104] 	ABI class: X.Org Video Driver, version 24.0
[   197.104] (II) LoadModule: "fbdev"
[   197.104] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   197.105] (II) Module fbdev: vendor="X.Org Foundation"
[   197.105] 	compiled for 1.20.0, module version = 0.5.0
[   197.105] 	Module class: X.Org Video Driver
[   197.105] 	ABI class: X.Org Video Driver, version 24.0
[   197.105] (II) LoadModule: "vesa"
[   197.105] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   197.105] (II) Module vesa: vendor="X.Org Foundation"
[   197.105] 	compiled for 1.20.0, module version = 2.4.0
[   197.105] 	Module class: X.Org Video Driver
[   197.105] 	ABI class: X.Org Video Driver, version 24.0
[   197.105] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   197.105] (II) FBDEV: driver for framebuffer: fbdev
[   197.105] (II) VESA: driver for VESA chipsets: vesa
[   197.105] (II) modeset(0): using drv /dev/dri/card0
[   197.105] (WW) Falling back to old probe method for fbdev
[   197.105] (II) Loading sub module "fbdevhw"
[   197.105] (II) LoadModule: "fbdevhw"
[   197.105] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   197.105] (II) Module fbdevhw: vendor="X.Org Foundation"
[   197.105] 	compiled for 1.20.1, module version = 0.0.2
[   197.105] 	ABI class: X.Org Video Driver, version 24.0
[   197.105] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   197.105] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[   197.105] (==) modeset(0): RGB weight 888
[   197.105] (==) modeset(0): Default visual is TrueColor
[   197.105] (II) Loading sub module "glamoregl"
[   197.105] (II) LoadModule: "glamoregl"
[   197.106] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   197.108] (II) Module glamoregl: vendor="X.Org Foundation"
[   197.108] 	compiled for 1.20.1, module version = 1.0.1
[   197.108] 	ABI class: X.Org ANSI C Emulation, version 0.4

xrxr

Member

Registered: 2015-08-01

Posts: 14

Re: [SOLVED] Starting Xorg hangs when using mesa 18.* on Ryzen 2400g

On mesa-17.3.7-1, the driver that ends up finding the screen is modesetting, so I thought maybe saving x the search and telling it to use modsetting would work on mesa-18.1.6-1.
No luck though, since modsetting loads glamoregl as a submodule which causes the hang.

Last edited by xrxr (2018-08-21 20:23:05)

seth

Member

From: Won't reply 2 private help req

Registered: 2012-09-03

Posts: 77,854

Re: [SOLVED] Starting Xorg hangs when using mesa 18.* on Ryzen 2400g

At least we know it's not interference by the radeon driver.
Try passing

amdgpu.dc=0 amdgpu.dpm=0 amdgpu.aspm=0 amdgpu.runpm=0 amdgpu.bapm=0

to the kernel parameters.
Are you sure the *only* thing is to sysrq? Can you eg. ssh into the machine for a remote inspection (assuming only the graphics stack is affected)

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

xrxr

Member

Registered: 2015-08-01

Posts: 14

Re: [SOLVED] Starting Xorg hangs when using mesa 18.* on Ryzen 2400g

At least we know it's not interference by the radeon driver.
Try passing

amdgpu.dc=0 amdgpu.dpm=0 amdgpu.aspm=0 amdgpu.runpm=0 amdgpu.bapm=0

to the kernel parameters.
Are you sure the *only* thing is to sysrq? Can you eg. ssh into the machine for a remote inspection (assuming only the graphics stack is affected)

With those kernel parameters it hangs before I even get a tty to do startx (!)
I tried starting a web server and then triggering the hang and visiting the web server. Since that works I assume ssh would work also.

Last edited by xrxr (2018-08-22 14:22:27)

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 25,384

Re: [SOLVED] Starting Xorg hangs when using mesa 18.* on Ryzen 2400g

Can we get a kernel/journal/dmesg log? FWIW description tangentially sounds like https://bbs.archlinux.org/viewtopic.php?id=239350 verify you aren't using an affected UEFI version

xrxr

Member

Registered: 2015-08-01

Posts: 14

Re: [SOLVED] Starting Xorg hangs when using mesa 18.* on Ryzen 2400g

My motherboard was released recently and it only has one BIOS release which I'm running. (MSI B450I GAMING PLUS AC)

Here is what I got for logging into tty1, running startx, waiting 30 seconds, using sysrq to send SIGTERM to all processes then logging back in to collect the logs with journalctl --boot

Nothing stands out to me in the logs... Should I submit a bug report somewhere? But without anything in the logs maybe that wouldn't be productive either...

Aug 22 11:28:50 loop_back kernel: Linux version 4.18.3-arch1-1-ARCH (builduser@heftig-24267) (gcc version 8.2.0 (GCC)) #1 SMP PREEMPT Sat Aug 18 09:22:54 UTC 2018
Aug 22 11:28:50 loop_back kernel: Command line: root=UUID=6f93dbf4-ec0b-4800-947a-b4d2bad4b9e0 rw initrd=/EFI/Arch/initramfs-linux.img sysrq_always_enabled=1
Aug 22 11:28:50 loop_back kernel: KERNEL supported cpus:
Aug 22 11:28:50 loop_back kernel:   Intel GenuineIntel
Aug 22 11:28:50 loop_back kernel:   AMD AuthenticAMD
Aug 22 11:28:50 loop_back kernel:   Centaur CentaurHauls
Aug 22 11:28:50 loop_back kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
Aug 22 11:28:50 loop_back kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
Aug 22 11:28:50 loop_back kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
Aug 22 11:28:50 loop_back kernel: x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
Aug 22 11:28:50 loop_back kernel: x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
Aug 22 11:28:50 loop_back kernel: BIOS-provided physical RAM map:
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x000000000400a000-0x0000000009d7ffff] usable
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x000000000b020000-0x000000009d1a0fff] usable
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x000000009d1a1000-0x000000009d2b8fff] reserved
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x000000009d2b9000-0x000000009d3abfff] usable
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x000000009d3ac000-0x000000009d779fff] ACPI NVS
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x000000009d77a000-0x000000009e665fff] reserved
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x000000009e666000-0x000000009effffff] usable
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x000000009f000000-0x00000000dfffffff] reserved
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
Aug 22 11:28:50 loop_back kernel: BIOS-e820: [mem 0x0000000100000000-0x000000041f33ffff] usable
Aug 22 11:28:50 loop_back kernel: NX (Execute Disable) protection: active
Aug 22 11:28:50 loop_back kernel: e820: update [mem 0x91590018-0x9159e057] usable ==> usable
Aug 22 11:28:50 loop_back kernel: e820: update [mem 0x91590018-0x9159e057] usable ==> usable
Aug 22 11:28:50 loop_back kernel: e820: update [mem 0x91582018-0x9158f457] usable ==> usable
Aug 22 11:28:50 loop_back kernel: e820: update [mem 0x91582018-0x9158f457] usable ==> usable
Aug 22 11:28:50 loop_back kernel: extended physical RAM map:
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x0000000000100000-0x0000000003ffffff] usable
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x000000000400a000-0x0000000009d7ffff] usable
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x000000000a000000-0x000000000affffff] usable
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x000000000b020000-0x0000000091582017] usable
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x0000000091582018-0x000000009158f457] usable
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x000000009158f458-0x0000000091590017] usable
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x0000000091590018-0x000000009159e057] usable
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x000000009159e058-0x000000009d1a0fff] usable
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x000000009d1a1000-0x000000009d2b8fff] reserved
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x000000009d2b9000-0x000000009d3abfff] usable
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x000000009d3ac000-0x000000009d779fff] ACPI NVS
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x000000009d77a000-0x000000009e665fff] reserved
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x000000009e666000-0x000000009effffff] usable
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x000000009f000000-0x00000000dfffffff] reserved
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x00000000fd800000-0x00000000fdffffff] reserved
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
Aug 22 11:28:50 loop_back kernel: reserve setup_data: [mem 0x0000000100000000-0x000000041f33ffff] usable
Aug 22 11:28:50 loop_back kernel: efi: EFI v2.60 by American Megatrends
Aug 22 11:28:50 loop_back kernel: efi:  ACPI 2.0=0x9d3ac000  ACPI=0x9d3ac000  SMBIOS=0x9e48e000  ESRT=0x98b6af98  MEMATTR=0x98b69698 
Aug 22 11:28:50 loop_back kernel: SMBIOS 2.8 present.
Aug 22 11:28:50 loop_back kernel: DMI: Micro-Star International Co., Ltd. MS-7A40/B450I GAMING PLUS AC (MS-7A40), BIOS A.00 06/26/2018
Aug 22 11:28:50 loop_back kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Aug 22 11:28:50 loop_back kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Aug 22 11:28:50 loop_back kernel: last_pfn = 0x41f340 max_arch_pfn = 0x400000000
Aug 22 11:28:50 loop_back kernel: MTRR default type: uncachable
Aug 22 11:28:50 loop_back kernel: MTRR fixed ranges enabled:
Aug 22 11:28:50 loop_back kernel:   00000-9FFFF write-back
Aug 22 11:28:50 loop_back kernel:   A0000-BFFFF write-through
Aug 22 11:28:50 loop_back kernel:   C0000-FFFFF write-protect
Aug 22 11:28:50 loop_back kernel: MTRR variable ranges enabled:
Aug 22 11:28:50 loop_back kernel:   0 base 000000000000 mask FFFF80000000 write-back
Aug 22 11:28:50 loop_back kernel:   1 base 000080000000 mask FFFFC0000000 write-back
Aug 22 11:28:50 loop_back kernel:   2 base 0000C0000000 mask FFFFE0000000 write-back
Aug 22 11:28:50 loop_back kernel:   3 disabled
Aug 22 11:28:50 loop_back kernel:   4 disabled
Aug 22 11:28:50 loop_back kernel:   5 disabled
Aug 22 11:28:50 loop_back kernel:   6 disabled
Aug 22 11:28:50 loop_back kernel:   7 disabled
Aug 22 11:28:50 loop_back kernel: TOM2: 0000000420000000 aka 16896M
Aug 22 11:28:50 loop_back kernel: x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
Aug 22 11:28:50 loop_back kernel: e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
Aug 22 11:28:50 loop_back kernel: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
Aug 22 11:28:50 loop_back kernel: esrt: Reserving ESRT space from 0x0000000098b6af98 to 0x0000000098b6afd0.
Aug 22 11:28:50 loop_back kernel: Scanning 1 areas for low memory corruption
Aug 22 11:28:50 loop_back kernel: Base memory trampoline at [(____ptrval____)] 96000 size 24576
Aug 22 11:28:50 loop_back kernel: Using GB pages for direct mapping
Aug 22 11:28:50 loop_back kernel: BRK [0x39ae76000, 0x39ae76fff] PGTABLE
Aug 22 11:28:50 loop_back kernel: BRK [0x39ae77000, 0x39ae77fff] PGTABLE
Aug 22 11:28:50 loop_back kernel: BRK [0x39ae78000, 0x39ae78fff] PGTABLE
Aug 22 11:28:50 loop_back kernel: BRK [0x39ae79000, 0x39ae79fff] PGTABLE
Aug 22 11:28:50 loop_back kernel: BRK [0x39ae7a000, 0x39ae7afff] PGTABLE
Aug 22 11:28:50 loop_back kernel: BRK [0x39ae7b000, 0x39ae7bfff] PGTABLE
Aug 22 11:28:50 loop_back kernel: BRK [0x39ae7c000, 0x39ae7cfff] PGTABLE
Aug 22 11:28:50 loop_back kernel: BRK [0x39ae7d000, 0x39ae7dfff] PGTABLE
Aug 22 11:28:50 loop_back kernel: BRK [0x39ae7e000, 0x39ae7efff] PGTABLE
Aug 22 11:28:50 loop_back kernel: BRK [0x39ae7f000, 0x39ae7ffff] PGTABLE
Aug 22 11:28:50 loop_back kernel: BRK [0x39ae80000, 0x39ae80fff] PGTABLE
Aug 22 11:28:50 loop_back kernel: BRK [0x39ae81000, 0x39ae81fff] PGTABLE
Aug 22 11:28:50 loop_back kernel: Secure boot disabled
Aug 22 11:28:50 loop_back kernel: RAMDISK: [mem 0x7f8a2000-0x7fffefff]
Aug 22 11:28:50 loop_back kernel: ACPI: Early table checksum verification disabled
Aug 22 11:28:50 loop_back kernel: ACPI: RSDP 0x000000009D3AC000 000024 (v02 ALASKA)
Aug 22 11:28:50 loop_back kernel: ACPI: XSDT 0x000000009D3AC0A0 0000BC (v01 ALASKA A M I    01072009 AMI  00010013)
Aug 22 11:28:50 loop_back kernel: ACPI: FACP 0x000000009D3B3418 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
Aug 22 11:28:50 loop_back kernel: ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180531/tbfadt-624)
Aug 22 11:28:50 loop_back kernel: ACPI: DSDT 0x000000009D3AC1F0 007226 (v02 ALASKA A M I    01072009 INTL 20120913)
Aug 22 11:28:50 loop_back kernel: ACPI: FACS 0x000000009D763E00 000040
Aug 22 11:28:50 loop_back kernel: ACPI: APIC 0x000000009D3B3530 0000DE (v03 ALASKA A M I    01072009 AMI  00010013)
Aug 22 11:28:50 loop_back kernel: ACPI: FPDT 0x000000009D3B3610 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
Aug 22 11:28:50 loop_back kernel: ACPI: FIDT 0x000000009D3B3658 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
Aug 22 11:28:50 loop_back kernel: ACPI: SSDT 0x000000009D3B36F8 005367 (v02 AMD    AmdTable 00000002 MSFT 02000002)
Aug 22 11:28:50 loop_back kernel: ACPI: SSDT 0x000000009D3B8A60 00119C (v01 AMD    AMD CPU  00000001 AMD  00000001)
Aug 22 11:28:50 loop_back kernel: ACPI: CRAT 0x000000009D3B9C00 000810 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
Aug 22 11:28:50 loop_back kernel: ACPI: CDIT 0x000000009D3BA410 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
Aug 22 11:28:50 loop_back kernel: ACPI: SSDT 0x000000009D3BA440 002D89 (v01 AMD    AMD AOD  00000001 INTL 20120913)
Aug 22 11:28:50 loop_back kernel: ACPI: MCFG 0x000000009D3BD1D0 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
Aug 22 11:28:50 loop_back kernel: ACPI: HPET 0x000000009D3BD210 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
Aug 22 11:28:50 loop_back kernel: ACPI: UEFI 0x000000009D3BD248 000042 (v01                 00000000      00000000)
Aug 22 11:28:50 loop_back kernel: ACPI: IVRS 0x000000009D3BD290 0000D0 (v02 AMD    AMD IVRS 00000001 AMD  00000000)
Aug 22 11:28:50 loop_back kernel: ACPI: BGRT 0x000000009D3BD360 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
Aug 22 11:28:50 loop_back kernel: ACPI: SSDT 0x000000009D3BD398 000E96 (v01 AMD    AmdTable 00000001 INTL 20120913)
Aug 22 11:28:50 loop_back kernel: ACPI: SSDT 0x000000009D3BE230 000850 (v01 AMD    AmdTable 00000001 INTL 20120913)
Aug 22 11:28:50 loop_back kernel: ACPI: SSDT 0x000000009D3BEA80 001A41 (v01 AMD    AmdTable 00000001 INTL 20120913)
Aug 22 11:28:50 loop_back kernel: ACPI: SSDT 0x000000009D3C04C8 0000F8 (v01 AMD    AMD PT   00001000 INTL 20120913)
Aug 22 11:28:50 loop_back kernel: ACPI: WSMT 0x000000009D3C05C0 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
Aug 22 11:28:50 loop_back kernel: ACPI: Local APIC address 0xfee00000
Aug 22 11:28:50 loop_back kernel: No NUMA configuration found
Aug 22 11:28:50 loop_back kernel: Faking a node at [mem 0x0000000000000000-0x000000041f33ffff]
Aug 22 11:28:50 loop_back kernel: NODE_DATA(0) allocated [mem 0x41f33c000-0x41f33ffff]
Aug 22 11:28:50 loop_back kernel: tsc: Fast TSC calibration failed
Aug 22 11:28:50 loop_back kernel: tsc: Using PIT calibration value
Aug 22 11:28:50 loop_back kernel: Zone ranges:
Aug 22 11:28:50 loop_back kernel:   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
Aug 22 11:28:50 loop_back kernel:   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
Aug 22 11:28:50 loop_back kernel:   Normal   [mem 0x0000000100000000-0x000000041f33ffff]
Aug 22 11:28:50 loop_back kernel:   Device   empty
Aug 22 11:28:50 loop_back kernel: Movable zone start for each node
Aug 22 11:28:50 loop_back kernel: Early memory node ranges
Aug 22 11:28:50 loop_back kernel:   node   0: [mem 0x0000000000001000-0x000000000009ffff]
Aug 22 11:28:50 loop_back kernel:   node   0: [mem 0x0000000000100000-0x0000000003ffffff]
Aug 22 11:28:50 loop_back kernel:   node   0: [mem 0x000000000400a000-0x0000000009d7ffff]
Aug 22 11:28:50 loop_back kernel:   node   0: [mem 0x000000000a000000-0x000000000affffff]
Aug 22 11:28:50 loop_back kernel:   node   0: [mem 0x000000000b020000-0x000000009d1a0fff]
Aug 22 11:28:50 loop_back kernel:   node   0: [mem 0x000000009d2b9000-0x000000009d3abfff]
Aug 22 11:28:50 loop_back kernel:   node   0: [mem 0x000000009e666000-0x000000009effffff]
Aug 22 11:28:50 loop_back kernel:   node   0: [mem 0x0000000100000000-0x000000041f33ffff]
Aug 22 11:28:50 loop_back kernel: Reserved but unavailable: 9949 pages
Aug 22 11:28:50 loop_back kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000041f33ffff]
Aug 22 11:28:50 loop_back kernel: On node 0 totalpages: 3918947
Aug 22 11:28:50 loop_back kernel:   DMA zone: 64 pages used for memmap
Aug 22 11:28:50 loop_back kernel:   DMA zone: 27 pages reserved
Aug 22 11:28:50 loop_back kernel:   DMA zone: 3999 pages, LIFO batch:0
Aug 22 11:28:50 loop_back kernel:   DMA32 zone: 10023 pages used for memmap
Aug 22 11:28:50 loop_back kernel:   DMA32 zone: 641412 pages, LIFO batch:31
Aug 22 11:28:50 loop_back kernel:   Normal zone: 51149 pages used for memmap
Aug 22 11:28:50 loop_back kernel:   Normal zone: 3273536 pages, LIFO batch:31
Aug 22 11:28:50 loop_back kernel: ACPI: PM-Timer IO Port: 0x808
Aug 22 11:28:50 loop_back kernel: ACPI: Local APIC address 0xfee00000
Aug 22 11:28:50 loop_back kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
Aug 22 11:28:50 loop_back kernel: IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
Aug 22 11:28:50 loop_back kernel: IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55
Aug 22 11:28:50 loop_back kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Aug 22 11:28:50 loop_back kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Aug 22 11:28:50 loop_back kernel: ACPI: IRQ0 used by override.
Aug 22 11:28:50 loop_back kernel: ACPI: IRQ9 used by override.
Aug 22 11:28:50 loop_back kernel: Using ACPI (MADT) for SMP configuration information
Aug 22 11:28:50 loop_back kernel: ACPI: HPET id: 0x10228201 base: 0xfed00000
Aug 22 11:28:50 loop_back kernel: smpboot: Allowing 16 CPUs, 8 hotplug CPUs
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0x04000000-0x04009fff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0x09d80000-0x09ffffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0x91582000-0x91582fff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0x9158f000-0x9158ffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0x91590000-0x91590fff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0x9159e000-0x9159efff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0x9d1a1000-0x9d2b8fff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0x9d3ac000-0x9d779fff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0x9d77a000-0x9e665fff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0x9f000000-0xdfffffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfc000000-0xfd7fffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfd800000-0xfdffffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
Aug 22 11:28:50 loop_back kernel: PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
Aug 22 11:28:50 loop_back kernel: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Aug 22 11:28:50 loop_back kernel: Booting paravirtualized kernel on bare hardware
Aug 22 11:28:50 loop_back kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
Aug 22 11:28:50 loop_back kernel: random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
Aug 22 11:28:50 loop_back kernel: setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:16 nr_node_ids:1
Aug 22 11:28:50 loop_back kernel: percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144
Aug 22 11:28:50 loop_back kernel: pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
Aug 22 11:28:50 loop_back kernel: pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
Aug 22 11:28:50 loop_back kernel: Built 1 zonelists, mobility grouping on.  Total pages: 3857684
Aug 22 11:28:50 loop_back kernel: Policy zone: Normal
Aug 22 11:28:50 loop_back kernel: Kernel command line: root=UUID=6f93dbf4-ec0b-4800-947a-b4d2bad4b9e0 rw initrd=/EFI/Arch/initramfs-linux.img sysrq_always_enabled=1
Aug 22 11:28:50 loop_back kernel: sysrq: sysrq always enabled.
Aug 22 11:28:50 loop_back kernel: Calgary: detecting Calgary via BIOS EBDA area
Aug 22 11:28:50 loop_back kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Aug 22 11:28:50 loop_back kernel: Memory: 15250672K/15675788K available (10252K kernel code, 1297K rwdata, 3528K rodata, 1488K init, 612K bss, 425116K reserved, 0K cma-reserved)
Aug 22 11:28:50 loop_back kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Aug 22 11:28:50 loop_back kernel: ftrace: allocating 33392 entries in 131 pages
Aug 22 11:28:50 loop_back kernel: Preemptible hierarchical RCU implementation.
Aug 22 11:28:50 loop_back kernel:         CONFIG_RCU_FANOUT set to non-default value of 32
Aug 22 11:28:50 loop_back kernel:         RCU dyntick-idle grace-period acceleration is enabled.
Aug 22 11:28:50 loop_back kernel:         RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
Aug 22 11:28:50 loop_back kernel:         RCU priority boosting: priority 1 delay 500 ms.
Aug 22 11:28:50 loop_back kernel:         Tasks RCU enabled.
Aug 22 11:28:50 loop_back kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
Aug 22 11:28:50 loop_back kernel: NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16
Aug 22 11:28:50 loop_back kernel:         Offload RCU callbacks from CPUs: (none).
Aug 22 11:28:50 loop_back kernel: Console: colour dummy device 80x25
Aug 22 11:28:50 loop_back kernel: console [tty0] enabled
Aug 22 11:28:50 loop_back kernel: ACPI: Core revision 20180531
Aug 22 11:28:50 loop_back kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
Aug 22 11:28:50 loop_back kernel: hpet clockevent registered
Aug 22 11:28:50 loop_back kernel: APIC: Switch to symmetric I/O mode setup
Aug 22 11:28:50 loop_back kernel: Switched APIC routing to physical flat.
Aug 22 11:28:50 loop_back kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Aug 22 11:28:50 loop_back kernel: tsc: Fast TSC calibration failed
Aug 22 11:28:50 loop_back kernel: tsc: PIT calibration matches HPET. 1 loops
Aug 22 11:28:50 loop_back kernel: tsc: Detected 3599.932 MHz processor
Aug 22 11:28:50 loop_back kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e4133718c, max_idle_ns: 440795366800 ns
Aug 22 11:28:50 loop_back kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 7202.85 BogoMIPS (lpj=11999773)
Aug 22 11:28:50 loop_back kernel: pid_max: default: 32768 minimum: 301
Aug 22 11:28:50 loop_back kernel: Security Framework initialized
Aug 22 11:28:50 loop_back kernel: Yama: becoming mindful.
Aug 22 11:28:50 loop_back kernel: Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Aug 22 11:28:50 loop_back kernel: Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Aug 22 11:28:50 loop_back kernel: Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Aug 22 11:28:50 loop_back kernel: Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Aug 22 11:28:50 loop_back kernel: mce: CPU supports 23 MCE banks
Aug 22 11:28:50 loop_back kernel: LVT offset 1 assigned for vector 0xf9
Aug 22 11:28:50 loop_back kernel: LVT offset 2 assigned for vector 0xf4
Aug 22 11:28:50 loop_back kernel: Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Aug 22 11:28:50 loop_back kernel: Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Aug 22 11:28:50 loop_back kernel: Spectre V2 : Mitigation: Full AMD retpoline
Aug 22 11:28:50 loop_back kernel: Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Aug 22 11:28:50 loop_back kernel: Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
Aug 22 11:28:50 loop_back kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Aug 22 11:28:50 loop_back kernel: Freeing SMP alternatives memory: 28K
Aug 22 11:28:50 loop_back kernel: smpboot: CPU0: AMD Ryzen 5 2400G with Radeon Vega Graphics (family: 0x17, model: 0x11, stepping: 0x0)
Aug 22 11:28:50 loop_back kernel: Performance Events: Fam17h core perfctr, AMD PMU driver.
Aug 22 11:28:50 loop_back kernel: ... version:                0
Aug 22 11:28:50 loop_back kernel: ... bit width:              48
Aug 22 11:28:50 loop_back kernel: ... generic registers:      6
Aug 22 11:28:50 loop_back kernel: ... value mask:             0000ffffffffffff
Aug 22 11:28:50 loop_back kernel: ... max period:             00007fffffffffff
Aug 22 11:28:50 loop_back kernel: ... fixed-purpose events:   0
Aug 22 11:28:50 loop_back kernel: ... event mask:             000000000000003f
Aug 22 11:28:50 loop_back kernel: Hierarchical SRCU implementation.
Aug 22 11:28:50 loop_back kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
Aug 22 11:28:50 loop_back kernel: smp: Bringing up secondary CPUs ...
Aug 22 11:28:50 loop_back kernel: x86: Booting SMP configuration:
Aug 22 11:28:50 loop_back kernel: .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7
Aug 22 11:28:50 loop_back kernel: smp: Brought up 1 node, 8 CPUs
Aug 22 11:28:50 loop_back kernel: smpboot: Max logical packages: 2
Aug 22 11:28:50 loop_back kernel: smpboot: Total of 8 processors activated (57621.86 BogoMIPS)
Aug 22 11:28:50 loop_back kernel: devtmpfs: initialized
Aug 22 11:28:50 loop_back kernel: x86/mm: Memory block size: 128MB
Aug 22 11:28:50 loop_back kernel: PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes)
Aug 22 11:28:50 loop_back kernel: PM: Registering ACPI NVS region [mem 0x9d3ac000-0x9d779fff] (3989504 bytes)
Aug 22 11:28:50 loop_back kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
Aug 22 11:28:50 loop_back kernel: futex hash table entries: 4096 (order: 6, 262144 bytes)
Aug 22 11:28:50 loop_back kernel: pinctrl core: initialized pinctrl subsystem
Aug 22 11:28:50 loop_back kernel: RTC time: 15:28:46, date: 08/22/18
Aug 22 11:28:50 loop_back kernel: NET: Registered protocol family 16
Aug 22 11:28:50 loop_back kernel: audit: initializing netlink subsys (disabled)
Aug 22 11:28:50 loop_back kernel: audit: type=2000 audit(1534951725.379:1): state=initialized audit_enabled=0 res=1
Aug 22 11:28:50 loop_back kernel: cpuidle: using governor ladder
Aug 22 11:28:50 loop_back kernel: cpuidle: using governor menu
Aug 22 11:28:50 loop_back kernel: ACPI: bus type PCI registered
Aug 22 11:28:50 loop_back kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Aug 22 11:28:50 loop_back kernel: PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
Aug 22 11:28:50 loop_back kernel: PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
Aug 22 11:28:50 loop_back kernel: PCI: Using configuration type 1 for base access
Aug 22 11:28:50 loop_back kernel: HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
Aug 22 11:28:50 loop_back kernel: HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
Aug 22 11:28:50 loop_back kernel: ACPI: Added _OSI(Module Device)
Aug 22 11:28:50 loop_back kernel: ACPI: Added _OSI(Processor Device)
Aug 22 11:28:50 loop_back kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Aug 22 11:28:50 loop_back kernel: ACPI: Added _OSI(Processor Aggregator Device)
Aug 22 11:28:50 loop_back kernel: ACPI: Added _OSI(Linux-Dell-Video)
Aug 22 11:28:50 loop_back kernel: ACPI BIOS Error (bug): Failure creating [\_SB.SMIC], AE_ALREADY_EXISTS (20180531/dswload2-316)
Aug 22 11:28:50 loop_back kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180531/psobject-221)
Aug 22 11:28:50 loop_back kernel: ACPI BIOS Error (bug): Failure creating [\_SB.SMIB], AE_ALREADY_EXISTS (20180531/dsfield-594)
Aug 22 11:28:50 loop_back kernel: ACPI: 8 ACPI AML tables successfully acquired and loaded
Aug 22 11:28:50 loop_back kernel: ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
Aug 22 11:28:50 loop_back kernel: ACPI: Interpreter enabled
Aug 22 11:28:50 loop_back kernel: ACPI: (supports S0 S3 S4 S5)
Aug 22 11:28:50 loop_back kernel: ACPI: Using IOAPIC for interrupt routing
Aug 22 11:28:50 loop_back kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Aug 22 11:28:50 loop_back kernel: ACPI: Enabled 2 GPEs in block 00 to 1F
Aug 22 11:28:50 loop_back kernel: ACPI: Power Resource [P0ST] (on)
Aug 22 11:28:50 loop_back kernel: ACPI: Power Resource [P3ST] (on)
Aug 22 11:28:50 loop_back kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Aug 22 11:28:50 loop_back kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Aug 22 11:28:50 loop_back kernel: acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
Aug 22 11:28:50 loop_back kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
Aug 22 11:28:50 loop_back kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
Aug 22 11:28:50 loop_back kernel: PCI host bridge to bus 0000:00
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Aug 22 11:28:50 loop_back kernel: pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
Aug 22 11:28:50 loop_back kernel: pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
Aug 22 11:28:50 loop_back kernel: pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
Aug 22 11:28:50 loop_back kernel: pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
Aug 22 11:28:50 loop_back kernel: pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:00:01.6: [1022:15d3] type 01 class 0x060400
Aug 22 11:28:50 loop_back kernel: pci 0000:00:01.6: PME# supported from D0 D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
Aug 22 11:28:50 loop_back kernel: pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
Aug 22 11:28:50 loop_back kernel: pci 0000:00:08.1: enabling Extended Tags
Aug 22 11:28:50 loop_back kernel: pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
Aug 22 11:28:50 loop_back kernel: pci 0000:00:08.2: enabling Extended Tags
Aug 22 11:28:50 loop_back kernel: pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
Aug 22 11:28:50 loop_back kernel: pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
Aug 22 11:28:50 loop_back kernel: pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
Aug 22 11:28:50 loop_back kernel: pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
Aug 22 11:28:50 loop_back kernel: pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
Aug 22 11:28:50 loop_back kernel: pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
Aug 22 11:28:50 loop_back kernel: pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
Aug 22 11:28:50 loop_back kernel: pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
Aug 22 11:28:50 loop_back kernel: pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
Aug 22 11:28:50 loop_back kernel: pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
Aug 22 11:28:50 loop_back kernel: pci 0000:15:00.0: [1022:43d5] type 00 class 0x0c0330
Aug 22 11:28:50 loop_back kernel: pci 0000:15:00.0: reg 0x10: [mem 0xfe7a0000-0xfe7a7fff 64bit]
Aug 22 11:28:50 loop_back kernel: pci 0000:15:00.0: PME# supported from D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:15:00.1: [1022:43c8] type 00 class 0x010601
Aug 22 11:28:50 loop_back kernel: pci 0000:15:00.1: reg 0x24: [mem 0xfe780000-0xfe79ffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:15:00.1: reg 0x30: [mem 0xfe700000-0xfe77ffff pref]
Aug 22 11:28:50 loop_back kernel: pci 0000:15:00.1: PME# supported from D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:15:00.2: [1022:43c6] type 01 class 0x060400
Aug 22 11:28:50 loop_back kernel: pci 0000:15:00.2: PME# supported from D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:00:01.2: PCI bridge to [bus 15-1e]
Aug 22 11:28:50 loop_back kernel: pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:00:01.2:   bridge window [mem 0xfe500000-0xfe7fffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:16:00.0: [1022:43c7] type 01 class 0x060400
Aug 22 11:28:50 loop_back kernel: pci 0000:16:00.0: PME# supported from D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:16:01.0: [1022:43c7] type 01 class 0x060400
Aug 22 11:28:50 loop_back kernel: pci 0000:16:01.0: PME# supported from D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:16:04.0: [1022:43c7] type 01 class 0x060400
Aug 22 11:28:50 loop_back kernel: pci 0000:16:04.0: PME# supported from D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:16:05.0: [1022:43c7] type 01 class 0x060400
Aug 22 11:28:50 loop_back kernel: pci 0000:16:05.0: PME# supported from D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:16:06.0: [1022:43c7] type 01 class 0x060400
Aug 22 11:28:50 loop_back kernel: pci 0000:16:06.0: PME# supported from D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:16:07.0: [1022:43c7] type 01 class 0x060400
Aug 22 11:28:50 loop_back kernel: pci 0000:16:07.0: PME# supported from D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:15:00.2: PCI bridge to [bus 16-1e]
Aug 22 11:28:50 loop_back kernel: pci 0000:15:00.2:   bridge window [io  0xf000-0xffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:15:00.2:   bridge window [mem 0xfe500000-0xfe6fffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:16:00.0: PCI bridge to [bus 17]
Aug 22 11:28:50 loop_back kernel: pci 0000:16:01.0: PCI bridge to [bus 18]
Aug 22 11:28:50 loop_back kernel: pci 0000:1b:00.0: [10ec:8168] type 00 class 0x020000
Aug 22 11:28:50 loop_back kernel: pci 0000:1b:00.0: reg 0x10: [io  0xf000-0xf0ff]
Aug 22 11:28:50 loop_back kernel: pci 0000:1b:00.0: reg 0x18: [mem 0xfe604000-0xfe604fff 64bit]
Aug 22 11:28:50 loop_back kernel: pci 0000:1b:00.0: reg 0x20: [mem 0xfe600000-0xfe603fff 64bit]
Aug 22 11:28:50 loop_back kernel: pci 0000:1b:00.0: supports D1 D2
Aug 22 11:28:50 loop_back kernel: pci 0000:1b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:16:04.0: PCI bridge to [bus 1b]
Aug 22 11:28:50 loop_back kernel: pci 0000:16:04.0:   bridge window [io  0xf000-0xffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:16:04.0:   bridge window [mem 0xfe600000-0xfe6fffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:1c:00.0: [8086:24fb] type 00 class 0x028000
Aug 22 11:28:50 loop_back kernel: pci 0000:1c:00.0: reg 0x10: [mem 0xfe500000-0xfe501fff 64bit]
Aug 22 11:28:50 loop_back kernel: pci 0000:1c:00.0: PME# supported from D0 D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:16:05.0: PCI bridge to [bus 1c]
Aug 22 11:28:50 loop_back kernel: pci 0000:16:05.0:   bridge window [mem 0xfe500000-0xfe5fffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:16:06.0: PCI bridge to [bus 1d]
Aug 22 11:28:50 loop_back kernel: pci 0000:16:07.0: PCI bridge to [bus 1e]
Aug 22 11:28:50 loop_back kernel: pci 0000:2e:00.0: [144d:a808] type 00 class 0x010802
Aug 22 11:28:50 loop_back kernel: pci 0000:2e:00.0: reg 0x10: [mem 0xfe900000-0xfe903fff 64bit]
Aug 22 11:28:50 loop_back kernel: pci 0000:00:01.6: PCI bridge to [bus 2e]
Aug 22 11:28:50 loop_back kernel: pci 0000:00:01.6:   bridge window [mem 0xfe900000-0xfe9fffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.0: [1002:15dd] type 00 class 0x030000
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.0: reg 0x20: [io  0xe000-0xe0ff]
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.0: reg 0x24: [mem 0xfe400000-0xfe47ffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.0: enabling Extended Tags
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.0: BAR 0: assigned to efifb
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.0: PME# supported from D1 D2 D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.1: [1002:15de] type 00 class 0x040300
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.1: reg 0x10: [mem 0xfe488000-0xfe48bfff]
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.1: enabling Extended Tags
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.1: PME# supported from D1 D2 D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.2: [1022:15df] type 00 class 0x108000
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.2: reg 0x18: [mem 0xfe300000-0xfe3fffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.2: reg 0x24: [mem 0xfe48c000-0xfe48dfff]
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.2: enabling Extended Tags
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.3: [1022:15e0] type 00 class 0x0c0330
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.3: reg 0x10: [mem 0xfe200000-0xfe2fffff 64bit]
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.3: enabling Extended Tags
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.3: PME# supported from D0 D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.4: [1022:15e1] type 00 class 0x0c0330
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.4: reg 0x10: [mem 0xfe100000-0xfe1fffff 64bit]
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.4: enabling Extended Tags
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.4: PME# supported from D0 D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.6: [1022:15e3] type 00 class 0x040300
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.6: reg 0x10: [mem 0xfe480000-0xfe487fff]
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.6: enabling Extended Tags
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.6: PME# supported from D0 D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:00:08.1: PCI bridge to [bus 38]
Aug 22 11:28:50 loop_back kernel: pci 0000:00:08.1:   bridge window [io  0xe000-0xefff]
Aug 22 11:28:50 loop_back kernel: pci 0000:00:08.1:   bridge window [mem 0xfe100000-0xfe4fffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:00:08.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
Aug 22 11:28:50 loop_back kernel: pci 0000:39:00.0: [1022:7901] type 00 class 0x010601
Aug 22 11:28:50 loop_back kernel: pci 0000:39:00.0: reg 0x24: [mem 0xfe800000-0xfe8007ff]
Aug 22 11:28:50 loop_back kernel: pci 0000:39:00.0: enabling Extended Tags
Aug 22 11:28:50 loop_back kernel: pci 0000:39:00.0: PME# supported from D3hot D3cold
Aug 22 11:28:50 loop_back kernel: pci 0000:00:08.2: PCI bridge to [bus 39]
Aug 22 11:28:50 loop_back kernel: pci 0000:00:08.2:   bridge window [mem 0xfe800000-0xfe8fffff]
Aug 22 11:28:50 loop_back kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
Aug 22 11:28:50 loop_back kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
Aug 22 11:28:50 loop_back kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
Aug 22 11:28:50 loop_back kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
Aug 22 11:28:50 loop_back kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
Aug 22 11:28:50 loop_back kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
Aug 22 11:28:50 loop_back kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
Aug 22 11:28:50 loop_back kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.0: vgaarb: setting as boot VGA device
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.0: vgaarb: bridge control possible
Aug 22 11:28:50 loop_back kernel: vgaarb: loaded
Aug 22 11:28:50 loop_back kernel: pps_core: LinuxPPS API ver. 1 registered
Aug 22 11:28:50 loop_back kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Aug 22 11:28:50 loop_back kernel: PTP clock support registered
Aug 22 11:28:50 loop_back kernel: EDAC MC: Ver: 3.0.0
Aug 22 11:28:50 loop_back kernel: Registered efivars operations
Aug 22 11:28:50 loop_back kernel: PCI: Using ACPI for IRQ routing
Aug 22 11:28:50 loop_back kernel: PCI: pci_cache_line_size set to 64 bytes
Aug 22 11:28:50 loop_back kernel: e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff]
Aug 22 11:28:50 loop_back kernel: e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
Aug 22 11:28:50 loop_back kernel: e820: reserve RAM buffer [mem 0x91582018-0x93ffffff]
Aug 22 11:28:50 loop_back kernel: e820: reserve RAM buffer [mem 0x91590018-0x93ffffff]
Aug 22 11:28:50 loop_back kernel: e820: reserve RAM buffer [mem 0x9d1a1000-0x9fffffff]
Aug 22 11:28:50 loop_back kernel: e820: reserve RAM buffer [mem 0x9d3ac000-0x9fffffff]
Aug 22 11:28:50 loop_back kernel: e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
Aug 22 11:28:50 loop_back kernel: e820: reserve RAM buffer [mem 0x41f340000-0x41fffffff]
Aug 22 11:28:50 loop_back kernel: NetLabel: Initializing
Aug 22 11:28:50 loop_back kernel: NetLabel:  domain hash size = 128
Aug 22 11:28:50 loop_back kernel: NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
Aug 22 11:28:50 loop_back kernel: NetLabel:  unlabeled traffic allowed by default
Aug 22 11:28:50 loop_back kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Aug 22 11:28:50 loop_back kernel: hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Aug 22 11:28:50 loop_back kernel: clocksource: Switched to clocksource tsc-early
Aug 22 11:28:50 loop_back kernel: VFS: Disk quotas dquot_6.6.0
Aug 22 11:28:50 loop_back kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Aug 22 11:28:50 loop_back kernel: pnp: PnP ACPI init
Aug 22 11:28:50 loop_back kernel: system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
Aug 22 11:28:50 loop_back kernel: system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
Aug 22 11:28:50 loop_back kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 22 11:28:50 loop_back kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
Aug 22 11:28:50 loop_back kernel: system 00:03: [io  0x0a00-0x0a0f] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:03: [io  0x0a10-0x0a1f] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:03: [io  0x0a20-0x0a2f] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:03: [io  0x0a40-0x0a4f] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 22 11:28:50 loop_back kernel: system 00:04: [io  0x04d0-0x04d1] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [io  0x040b] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [io  0x04d6] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [io  0x0c00-0x0c01] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [io  0x0c14] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [io  0x0c50-0x0c51] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [io  0x0c52] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [io  0x0c6c] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [io  0x0c6f] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [io  0x0cd0-0x0cd1] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [io  0x0cd2-0x0cd3] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [io  0x0cd4-0x0cd5] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [io  0x0cd6-0x0cd7] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [io  0x0cd8-0x0cdf] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [io  0x0800-0x089f] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [io  0x0b00-0x0b0f] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [io  0x0b20-0x0b3f] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [io  0x0900-0x090f] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [io  0x0910-0x091f] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: [mem 0xff000000-0xffffffff] has been reserved
Aug 22 11:28:50 loop_back kernel: system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 22 11:28:50 loop_back kernel: pnp: PnP ACPI: found 5 devices
Aug 22 11:28:50 loop_back kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Aug 22 11:28:50 loop_back kernel: pci 0000:16:00.0: PCI bridge to [bus 17]
Aug 22 11:28:50 loop_back kernel: pci 0000:16:01.0: PCI bridge to [bus 18]
Aug 22 11:28:50 loop_back kernel: pci 0000:16:04.0: PCI bridge to [bus 1b]
Aug 22 11:28:50 loop_back kernel: pci 0000:16:04.0:   bridge window [io  0xf000-0xffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:16:04.0:   bridge window [mem 0xfe600000-0xfe6fffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:16:05.0: PCI bridge to [bus 1c]
Aug 22 11:28:50 loop_back kernel: pci 0000:16:05.0:   bridge window [mem 0xfe500000-0xfe5fffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:16:06.0: PCI bridge to [bus 1d]
Aug 22 11:28:50 loop_back kernel: pci 0000:16:07.0: PCI bridge to [bus 1e]
Aug 22 11:28:50 loop_back kernel: pci 0000:15:00.2: PCI bridge to [bus 16-1e]
Aug 22 11:28:50 loop_back kernel: pci 0000:15:00.2:   bridge window [io  0xf000-0xffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:15:00.2:   bridge window [mem 0xfe500000-0xfe6fffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:00:01.2: PCI bridge to [bus 15-1e]
Aug 22 11:28:50 loop_back kernel: pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:00:01.2:   bridge window [mem 0xfe500000-0xfe7fffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:00:01.6: PCI bridge to [bus 2e]
Aug 22 11:28:50 loop_back kernel: pci 0000:00:01.6:   bridge window [mem 0xfe900000-0xfe9fffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:00:08.1: PCI bridge to [bus 38]
Aug 22 11:28:50 loop_back kernel: pci 0000:00:08.1:   bridge window [io  0xe000-0xefff]
Aug 22 11:28:50 loop_back kernel: pci 0000:00:08.1:   bridge window [mem 0xfe100000-0xfe4fffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:00:08.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
Aug 22 11:28:50 loop_back kernel: pci 0000:00:08.2: PCI bridge to [bus 39]
Aug 22 11:28:50 loop_back kernel: pci 0000:00:08.2:   bridge window [mem 0xfe800000-0xfe8fffff]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:15: resource 0 [io  0xf000-0xffff]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:15: resource 1 [mem 0xfe500000-0xfe7fffff]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:16: resource 0 [io  0xf000-0xffff]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:16: resource 1 [mem 0xfe500000-0xfe6fffff]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:1b: resource 0 [io  0xf000-0xffff]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:1b: resource 1 [mem 0xfe600000-0xfe6fffff]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:1c: resource 1 [mem 0xfe500000-0xfe5fffff]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:2e: resource 1 [mem 0xfe900000-0xfe9fffff]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:38: resource 0 [io  0xe000-0xefff]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:38: resource 1 [mem 0xfe100000-0xfe4fffff]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:38: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
Aug 22 11:28:50 loop_back kernel: pci_bus 0000:39: resource 1 [mem 0xfe800000-0xfe8fffff]
Aug 22 11:28:50 loop_back kernel: NET: Registered protocol family 2
Aug 22 11:28:50 loop_back kernel: tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
Aug 22 11:28:50 loop_back kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Aug 22 11:28:50 loop_back kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Aug 22 11:28:50 loop_back kernel: TCP: Hash tables configured (established 131072 bind 65536)
Aug 22 11:28:50 loop_back kernel: UDP hash table entries: 8192 (order: 6, 262144 bytes)
Aug 22 11:28:50 loop_back kernel: UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
Aug 22 11:28:50 loop_back kernel: NET: Registered protocol family 1
Aug 22 11:28:50 loop_back kernel: NET: Registered protocol family 44
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
Aug 22 11:28:50 loop_back kernel: pci 0000:38:00.1: Linked as a consumer to 0000:38:00.0
Aug 22 11:28:50 loop_back kernel: PCI: CLS 64 bytes, default 64
Aug 22 11:28:50 loop_back kernel: Unpacking initramfs...
Aug 22 11:28:50 loop_back kernel: Freeing initrd memory: 7540K
Aug 22 11:28:50 loop_back kernel: AMD-Vi: Unable to write to IOMMU perf counter.
Aug 22 11:28:50 loop_back kernel: pci 0000:00:00.2: can't derive routing for PCI INT A
Aug 22 11:28:50 loop_back kernel: pci 0000:00:00.2: PCI INT A: not connected
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:00:01.0 to group 0
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:00:01.2 to group 1
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:00:01.6 to group 2
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:00:08.0 to group 3
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:00:08.1 to group 4
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:00:08.2 to group 3
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:00:14.0 to group 5
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:00:14.3 to group 5
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:00:18.0 to group 6
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:00:18.1 to group 6
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:00:18.2 to group 6
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:00:18.3 to group 6
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:00:18.4 to group 6
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:00:18.5 to group 6
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:00:18.6 to group 6
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:00:18.7 to group 6
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:15:00.0 to group 7
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:15:00.1 to group 7
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:15:00.2 to group 7
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:16:00.0 to group 7
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:16:01.0 to group 7
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:16:04.0 to group 7
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:16:05.0 to group 7
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:16:06.0 to group 7
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:16:07.0 to group 7
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:1b:00.0 to group 7
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:1c:00.0 to group 7
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:2e:00.0 to group 8
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:38:00.0 to group 9
Aug 22 11:28:50 loop_back kernel: iommu: Using direct mapping for device 0000:38:00.0
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:38:00.1 to group 10
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:38:00.2 to group 10
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:38:00.3 to group 10
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:38:00.4 to group 10
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:38:00.6 to group 10
Aug 22 11:28:50 loop_back kernel: iommu: Adding device 0000:39:00.0 to group 3
Aug 22 11:28:50 loop_back kernel: AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
Aug 22 11:28:50 loop_back kernel: AMD-Vi: Extended features (0x4f77ef22294ada):
Aug 22 11:28:50 loop_back kernel:  PPR NX GT IA GA PC GA_vAPIC
Aug 22 11:28:50 loop_back kernel: AMD-Vi: Interrupt remapping enabled
Aug 22 11:28:50 loop_back kernel: AMD-Vi: virtual APIC enabled
Aug 22 11:28:50 loop_back kernel: AMD-Vi: Lazy IO/TLB flushing enabled
Aug 22 11:28:50 loop_back kernel: amd_uncore: AMD NB counters detected
Aug 22 11:28:50 loop_back kernel: amd_uncore: AMD LLC counters detected
Aug 22 11:28:50 loop_back kernel: Scanning for low memory corruption every 60 seconds
Aug 22 11:28:50 loop_back kernel: Initialise system trusted keyrings
Aug 22 11:28:50 loop_back kernel: Key type blacklist registered
Aug 22 11:28:50 loop_back kernel: workingset: timestamp_bits=41 max_order=22 bucket_order=0
Aug 22 11:28:50 loop_back kernel: zbud: loaded
Aug 22 11:28:50 loop_back kernel: pstore: using lz4hc compression
Aug 22 11:28:50 loop_back kernel: Key type asymmetric registered
Aug 22 11:28:50 loop_back kernel: Asymmetric key parser 'x509' registered
Aug 22 11:28:50 loop_back kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
Aug 22 11:28:50 loop_back kernel: io scheduler noop registered
Aug 22 11:28:50 loop_back kernel: io scheduler deadline registered
Aug 22 11:28:50 loop_back kernel: io scheduler cfq registered (default)
Aug 22 11:28:50 loop_back kernel: io scheduler mq-deadline registered
Aug 22 11:28:50 loop_back kernel: io scheduler kyber registered
Aug 22 11:28:50 loop_back kernel: io scheduler bfq registered
Aug 22 11:28:50 loop_back kernel: pcieport 0000:00:01.2: AER enabled with IRQ 26
Aug 22 11:28:50 loop_back kernel: pcieport 0000:00:01.6: AER enabled with IRQ 27
Aug 22 11:28:50 loop_back kernel: pcieport 0000:00:01.2: Signaling PME with IRQ 26
Aug 22 11:28:50 loop_back kernel: pcieport 0000:00:01.6: Signaling PME with IRQ 27
Aug 22 11:28:50 loop_back kernel: pcieport 0000:00:08.1: Signaling PME with IRQ 28
Aug 22 11:28:50 loop_back kernel: pcieport 0000:00:08.2: Signaling PME with IRQ 29
Aug 22 11:28:50 loop_back kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Aug 22 11:28:50 loop_back kernel: efifb: probing for efifb
Aug 22 11:28:50 loop_back kernel: efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
Aug 22 11:28:50 loop_back kernel: efifb: mode is 1024x768x32, linelength=4096, pages=1
Aug 22 11:28:50 loop_back kernel: efifb: scrolling: redraw
Aug 22 11:28:50 loop_back kernel: efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Aug 22 11:28:50 loop_back kernel: Console: switching to colour frame buffer device 128x48
Aug 22 11:28:50 loop_back kernel: fb0: EFI VGA frame buffer device
Aug 22 11:28:50 loop_back kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Aug 22 11:28:50 loop_back kernel: ACPI: Power Button [PWRB]
Aug 22 11:28:50 loop_back kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Aug 22 11:28:50 loop_back kernel: ACPI: Power Button [PWRF]
Aug 22 11:28:50 loop_back kernel: Monitor-Mwait will be used to enter C-1 state
Aug 22 11:28:50 loop_back kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Aug 22 11:28:50 loop_back kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Aug 22 11:28:50 loop_back kernel: nvme nvme0: pci function 0000:2e:00.0
Aug 22 11:28:50 loop_back kernel: ledtrig-cpu: registered to indicate activity on CPUs
Aug 22 11:28:50 loop_back kernel: NET: Registered protocol family 10
Aug 22 11:28:50 loop_back kernel: Segment Routing with IPv6
Aug 22 11:28:50 loop_back kernel: NET: Registered protocol family 17
Aug 22 11:28:50 loop_back kernel: RAS: Correctable Errors collector initialized.
Aug 22 11:28:50 loop_back kernel: microcode: CPU0: patch_level=0x0810100b
Aug 22 11:28:50 loop_back kernel: microcode: CPU1: patch_level=0x0810100b
Aug 22 11:28:50 loop_back kernel: microcode: CPU2: patch_level=0x0810100b
Aug 22 11:28:50 loop_back kernel: microcode: CPU3: patch_level=0x0810100b
Aug 22 11:28:50 loop_back kernel: microcode: CPU4: patch_level=0x0810100b
Aug 22 11:28:50 loop_back kernel: microcode: CPU5: patch_level=0x0810100b
Aug 22 11:28:50 loop_back kernel: microcode: CPU6: patch_level=0x0810100b
Aug 22 11:28:50 loop_back kernel: microcode: CPU7: patch_level=0x0810100b
Aug 22 11:28:50 loop_back kernel: microcode: Microcode Update Driver: v2.2.
Aug 22 11:28:50 loop_back kernel: sched_clock: Marking stable (710280561, 0)->(798203736, -87923175)
Aug 22 11:28:50 loop_back kernel: registered taskstats version 1
Aug 22 11:28:50 loop_back kernel: Loading compiled-in X.509 certificates
Aug 22 11:28:50 loop_back kernel: zswap: loaded using pool lzo/zbud
Aug 22 11:28:50 loop_back kernel: Key type big_key registered
Aug 22 11:28:50 loop_back kernel:   Magic number: 14:183:488
Aug 22 11:28:50 loop_back kernel: regulator regulator.0: hash matches
Aug 22 11:28:50 loop_back kernel: hctosys: unable to open rtc device (rtc0)
Aug 22 11:28:50 loop_back kernel: nvme nvme0: missing or invalid SUBNQN field.
Aug 22 11:28:50 loop_back kernel: nvme nvme0: Shutdown timeout set to 8 seconds
Aug 22 11:28:50 loop_back kernel:  nvme0n1: p1 p3 p4
Aug 22 11:28:50 loop_back kernel: Freeing unused kernel memory: 1488K
Aug 22 11:28:50 loop_back kernel: Write protecting the kernel read-only data: 16384k
Aug 22 11:28:50 loop_back kernel: Freeing unused kernel memory: 2016K
Aug 22 11:28:50 loop_back kernel: Freeing unused kernel memory: 568K
Aug 22 11:28:50 loop_back kernel: raid6: sse2x1   gen()  9363 MB/s
Aug 22 11:28:50 loop_back kernel: raid6: sse2x1   xor()  8252 MB/s
Aug 22 11:28:50 loop_back kernel: raid6: sse2x2   gen() 16030 MB/s
Aug 22 11:28:50 loop_back kernel: raid6: sse2x2   xor() 11224 MB/s
Aug 22 11:28:50 loop_back kernel: raid6: sse2x4   gen() 18096 MB/s
Aug 22 11:28:50 loop_back kernel: raid6: sse2x4   xor() 10051 MB/s
Aug 22 11:28:50 loop_back kernel: raid6: avx2x1   gen() 19467 MB/s
Aug 22 11:28:50 loop_back kernel: tsc: Refined TSC clocksource calibration: 3599.992 MHz
Aug 22 11:28:50 loop_back kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e44bc06cb, max_idle_ns: 440795255742 ns
Aug 22 11:28:50 loop_back kernel: raid6: avx2x1   xor() 10804 MB/s
Aug 22 11:28:50 loop_back kernel: clocksource: Switched to clocksource tsc
Aug 22 11:28:50 loop_back kernel: raid6: avx2x2   gen() 24837 MB/s
Aug 22 11:28:50 loop_back kernel: raid6: avx2x2   xor() 15736 MB/s
Aug 22 11:28:50 loop_back kernel: raid6: avx2x4   gen() 25640 MB/s
Aug 22 11:28:50 loop_back kernel: raid6: avx2x4   xor() 13884 MB/s
Aug 22 11:28:50 loop_back kernel: raid6: using algorithm avx2x4 gen() 25640 MB/s
Aug 22 11:28:50 loop_back kernel: raid6: .... xor() 13884 MB/s, rmw enabled
Aug 22 11:28:50 loop_back kernel: raid6: using avx2x2 recovery algorithm
Aug 22 11:28:50 loop_back kernel: xor: automatically using best checksumming function   avx       
Aug 22 11:28:50 loop_back kernel: Btrfs loaded, crc32c=crc32c-intel
Aug 22 11:28:50 loop_back kernel: ACPI: bus type USB registered
Aug 22 11:28:50 loop_back kernel: usbcore: registered new interface driver usbfs
Aug 22 11:28:50 loop_back kernel: usbcore: registered new interface driver hub
Aug 22 11:28:50 loop_back kernel: usbcore: registered new device driver usb
Aug 22 11:28:50 loop_back kernel: SCSI subsystem initialized
Aug 22 11:28:50 loop_back kernel: xhci_hcd 0000:15:00.0: xHCI Host Controller
Aug 22 11:28:50 loop_back kernel: xhci_hcd 0000:15:00.0: new USB bus registered, assigned bus number 1
Aug 22 11:28:50 loop_back kernel: libata version 3.00 loaded.
Aug 22 11:28:50 loop_back kernel: ahci 0000:15:00.1: version 3.0
Aug 22 11:28:50 loop_back kernel: ahci 0000:15:00.1: SSS flag set, parallel bus scan disabled
Aug 22 11:28:50 loop_back kernel: ahci 0000:15:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
Aug 22 11:28:50 loop_back kernel: ahci 0000:15:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
Aug 22 11:28:50 loop_back kernel: scsi host0: ahci
Aug 22 11:28:50 loop_back kernel: scsi host1: ahci
Aug 22 11:28:50 loop_back kernel: scsi host2: ahci
Aug 22 11:28:50 loop_back kernel: scsi host3: ahci
Aug 22 11:28:50 loop_back kernel: scsi host4: ahci
Aug 22 11:28:50 loop_back kernel: scsi host5: ahci
Aug 22 11:28:50 loop_back kernel: scsi host6: ahci
Aug 22 11:28:50 loop_back kernel: scsi host7: ahci
Aug 22 11:28:50 loop_back kernel: ata1: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780100 irq 59
Aug 22 11:28:50 loop_back kernel: ata2: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780180 irq 59
Aug 22 11:28:50 loop_back kernel: ata3: DUMMY
Aug 22 11:28:50 loop_back kernel: ata4: DUMMY
Aug 22 11:28:50 loop_back kernel: ata5: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780300 irq 59
Aug 22 11:28:50 loop_back kernel: ata6: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780380 irq 59
Aug 22 11:28:50 loop_back kernel: ata7: DUMMY
Aug 22 11:28:50 loop_back kernel: ata8: DUMMY
Aug 22 11:28:50 loop_back kernel: ahci 0000:39:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
Aug 22 11:28:50 loop_back kernel: ahci 0000:39:00.0: flags: 64bit ncq sntf ilck led clo only pmp fbs pio 
Aug 22 11:28:50 loop_back kernel: scsi host8: ahci
Aug 22 11:28:50 loop_back kernel: ata9: SATA max UDMA/133 abar m2048@0xfe800000 port 0xfe800100 irq 61
Aug 22 11:28:50 loop_back kernel: BTRFS: device fsid 9f1725a4-c90d-4d96-bfd8-a00a0bf8d5ba devid 1 transid 702 /dev/nvme0n1p3
Aug 22 11:28:50 loop_back kernel: BTRFS: device fsid 6f93dbf4-ec0b-4800-947a-b4d2bad4b9e0 devid 1 transid 11613 /dev/nvme0n1p4
Aug 22 11:28:50 loop_back kernel: xhci_hcd 0000:15:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
Aug 22 11:28:50 loop_back kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
Aug 22 11:28:50 loop_back kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 22 11:28:50 loop_back kernel: usb usb1: Product: xHCI Host Controller
Aug 22 11:28:50 loop_back kernel: usb usb1: Manufacturer: Linux 4.18.3-arch1-1-ARCH xhci-hcd
Aug 22 11:28:50 loop_back kernel: usb usb1: SerialNumber: 0000:15:00.0
Aug 22 11:28:50 loop_back kernel: hub 1-0:1.0: USB hub found
Aug 22 11:28:50 loop_back kernel: hub 1-0:1.0: 10 ports detected
Aug 22 11:28:50 loop_back kernel: xhci_hcd 0000:15:00.0: xHCI Host Controller
Aug 22 11:28:50 loop_back kernel: xhci_hcd 0000:15:00.0: new USB bus registered, assigned bus number 2
Aug 22 11:28:50 loop_back kernel: xhci_hcd 0000:15:00.0: Host supports USB 3.10 Enhanced SuperSpeed
Aug 22 11:28:50 loop_back kernel: usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Aug 22 11:28:50 loop_back kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
Aug 22 11:28:50 loop_back kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 22 11:28:50 loop_back kernel: usb usb2: Product: xHCI Host Controller
Aug 22 11:28:50 loop_back kernel: usb usb2: Manufacturer: Linux 4.18.3-arch1-1-ARCH xhci-hcd
Aug 22 11:28:50 loop_back kernel: usb usb2: SerialNumber: 0000:15:00.0
Aug 22 11:28:50 loop_back kernel: hub 2-0:1.0: USB hub found
Aug 22 11:28:50 loop_back kernel: hub 2-0:1.0: 4 ports detected
Aug 22 11:28:50 loop_back kernel: xhci_hcd 0000:38:00.3: xHCI Host Controller
Aug 22 11:28:50 loop_back kernel: xhci_hcd 0000:38:00.3: new USB bus registered, assigned bus number 3
Aug 22 11:28:50 loop_back kernel: xhci_hcd 0000:38:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000040000410
Aug 22 11:28:50 loop_back kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
Aug 22 11:28:50 loop_back kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 22 11:28:50 loop_back kernel: usb usb3: Product: xHCI Host Controller
Aug 22 11:28:50 loop_back kernel: usb usb3: Manufacturer: Linux 4.18.3-arch1-1-ARCH xhci-hcd
Aug 22 11:28:50 loop_back kernel: usb usb3: SerialNumber: 0000:38:00.3
Aug 22 11:28:50 loop_back kernel: hub 3-0:1.0: USB hub found
Aug 22 11:28:50 loop_back kernel: hub 3-0:1.0: 4 ports detected
Aug 22 11:28:50 loop_back kernel: xhci_hcd 0000:38:00.3: xHCI Host Controller
Aug 22 11:28:50 loop_back kernel: xhci_hcd 0000:38:00.3: new USB bus registered, assigned bus number 4
Aug 22 11:28:50 loop_back kernel: xhci_hcd 0000:38:00.3: Host supports USB 3.10 Enhanced SuperSpeed
Aug 22 11:28:50 loop_back kernel: usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Aug 22 11:28:50 loop_back kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
Aug 22 11:28:50 loop_back kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 22 11:28:50 loop_back kernel: usb usb4: Product: xHCI Host Controller
Aug 22 11:28:50 loop_back kernel: usb usb4: Manufacturer: Linux 4.18.3-arch1-1-ARCH xhci-hcd
Aug 22 11:28:50 loop_back kernel: usb usb4: SerialNumber: 0000:38:00.3
Aug 22 11:28:50 loop_back kernel: hub 4-0:1.0: USB hub found
Aug 22 11:28:50 loop_back kernel: hub 4-0:1.0: 4 ports detected
Aug 22 11:28:50 loop_back kernel: xhci_hcd 0000:38:00.4: xHCI Host Controller
Aug 22 11:28:50 loop_back kernel: xhci_hcd 0000:38:00.4: new USB bus registered, assigned bus number 5
Aug 22 11:28:50 loop_back kernel: xhci_hcd 0000:38:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000040000410
Aug 22 11:28:50 loop_back kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
Aug 22 11:28:50 loop_back kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 22 11:28:50 loop_back kernel: usb usb5: Product: xHCI Host Controller
Aug 22 11:28:50 loop_back kernel: usb usb5: Manufacturer: Linux 4.18.3-arch1-1-ARCH xhci-hcd
Aug 22 11:28:50 loop_back kernel: usb usb5: SerialNumber: 0000:38:00.4
Aug 22 11:28:50 loop_back kernel: hub 5-0:1.0: USB hub found
Aug 22 11:28:50 loop_back kernel: hub 5-0:1.0: 1 port detected
Aug 22 11:28:50 loop_back kernel: xhci_hcd 0000:38:00.4: xHCI Host Controller
Aug 22 11:28:50 loop_back kernel: xhci_hcd 0000:38:00.4: new USB bus registered, assigned bus number 6
Aug 22 11:28:50 loop_back kernel: xhci_hcd 0000:38:00.4: Host supports USB 3.10 Enhanced SuperSpeed
Aug 22 11:28:50 loop_back kernel: usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
Aug 22 11:28:50 loop_back kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
Aug 22 11:28:50 loop_back kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Aug 22 11:28:50 loop_back kernel: usb usb6: Product: xHCI Host Controller
Aug 22 11:28:50 loop_back kernel: usb usb6: Manufacturer: Linux 4.18.3-arch1-1-ARCH xhci-hcd
Aug 22 11:28:50 loop_back kernel: usb usb6: SerialNumber: 0000:38:00.4
Aug 22 11:28:50 loop_back kernel: hub 6-0:1.0: USB hub found
Aug 22 11:28:50 loop_back kernel: hub 6-0:1.0: 1 port detected
Aug 22 11:28:50 loop_back kernel: ata9: SATA link down (SStatus 0 SControl 300)
Aug 22 11:28:50 loop_back kernel: usb 1-1: new full-speed USB device number 2 using xhci_hcd
Aug 22 11:28:50 loop_back kernel: usb 3-4: new full-speed USB device number 2 using xhci_hcd
Aug 22 11:28:50 loop_back kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Aug 22 11:28:50 loop_back kernel: ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR20002, max UDMA/100
Aug 22 11:28:50 loop_back kernel: ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32)
Aug 22 11:28:50 loop_back kernel: ata1.00: configured for UDMA/100
Aug 22 11:28:50 loop_back kernel: scsi 0:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 0002 PQ: 0 ANSI: 5
Aug 22 11:28:50 loop_back kernel: sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
Aug 22 11:28:50 loop_back kernel: sd 0:0:0:0: [sda] 4096-byte physical blocks
Aug 22 11:28:50 loop_back kernel: sd 0:0:0:0: [sda] Write Protect is off
Aug 22 11:28:50 loop_back kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 22 11:28:50 loop_back kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 22 11:28:50 loop_back kernel: usb 3-4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.03
Aug 22 11:28:50 loop_back kernel: usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Aug 22 11:28:50 loop_back kernel: usb 3-4: Product: USB Receiver
Aug 22 11:28:50 loop_back kernel: usb 3-4: Manufacturer: Logitech
Aug 22 11:28:50 loop_back kernel: hidraw: raw HID events driver (C) Jiri Kosina
Aug 22 11:28:50 loop_back kernel: usbcore: registered new interface driver usbhid
Aug 22 11:28:50 loop_back kernel: usbhid: USB HID core driver
Aug 22 11:28:50 loop_back kernel: logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:38:00.3-4/input2
Aug 22 11:28:50 loop_back kernel: usb 1-1: New USB device found, idVendor=1c11, idProduct=b04d, bcdDevice= 3.50
Aug 22 11:28:50 loop_back kernel: usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug 22 11:28:50 loop_back kernel: usb 1-1: Product: Keyboard - K-Type PixelMap USB
Aug 22 11:28:50 loop_back kernel: usb 1-1: Manufacturer: Input Club
Aug 22 11:28:50 loop_back kernel: usb 1-1: SerialNumber: 75410000B3FF00370022000441184E45 - mk20dx256
Aug 22 11:28:50 loop_back kernel: input: Input Club Keyboard - K-Type PixelMap USB as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-1/1-1:1.0/0003:1C11:B04D.0004/input/input2
Aug 22 11:28:50 loop_back kernel: input: Logitech Unifying Device. Wireless PID:405e Keyboard as /devices/pci0000:00/0000:00:08.1/0000:38:00.3/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:405E.0005/input/input3
Aug 22 11:28:50 loop_back kernel: hid-generic 0003:1C11:B04D.0004: input,hidraw1: USB HID v1.11 Keyboard [Input Club Keyboard - K-Type PixelMap USB] on usb-0000:15:00.0-1/input0
Aug 22 11:28:50 loop_back kernel: input: Logitech Unifying Device. Wireless PID:405e Mouse as /devices/pci0000:00/0000:00:08.1/0000:38:00.3/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:405E.0005/input/input4
Aug 22 11:28:50 loop_back kernel: input: Logitech Unifying Device. Wireless PID:405e Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:38:00.3/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:405E.0005/input/input5
Aug 22 11:28:50 loop_back kernel: input: Logitech Unifying Device. Wireless PID:405e System Control as /devices/pci0000:00/0000:00:08.1/0000:38:00.3/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:405E.0005/input/input6
Aug 22 11:28:50 loop_back kernel: input: Logitech Unifying Device. Wireless PID:405e Keyboard as /devices/pci0000:00/0000:00:08.1/0000:38:00.3/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:405E.0005/input/input11
Aug 22 11:28:50 loop_back kernel: hid-generic 0003:046D:405E.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:405e] on usb-0000:38:00.3-4:1
Aug 22 11:28:50 loop_back kernel: input: Input Club Keyboard - K-Type PixelMap USB as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-1/1-1:1.1/0003:1C11:B04D.0006/input/input16
Aug 22 11:28:50 loop_back kernel: ata2: SATA link down (SStatus 0 SControl 300)
Aug 22 11:28:50 loop_back kernel: hid-generic 0003:1C11:B04D.0006: input,hidraw3: USB HID v1.11 Keyboard [Input Club Keyboard - K-Type PixelMap USB] on usb-0000:15:00.0-1/input1
Aug 22 11:28:50 loop_back kernel:  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13
Aug 22 11:28:50 loop_back kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Aug 22 11:28:50 loop_back kernel: input: Input Club Keyboard - K-Type PixelMap USB System Control as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-1/1-1:1.2/0003:1C11:B04D.0007/input/input17
Aug 22 11:28:50 loop_back kernel: input: Input Club Keyboard - K-Type PixelMap USB Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-1/1-1:1.2/0003:1C11:B04D.0007/input/input18
Aug 22 11:28:50 loop_back kernel: hid-generic 0003:1C11:B04D.0007: input,hidraw4: USB HID v1.11 Device [Input Club Keyboard - K-Type PixelMap USB] on usb-0000:15:00.0-1/input2
Aug 22 11:28:50 loop_back kernel: input: Logitech M720 Triathlon as /devices/pci0000:00/0000:00:08.1/0000:38:00.3/usb3/3-4/3-4:1.2/0003:046D:C52B.0003/0003:046D:405E.0005/input/input19
Aug 22 11:28:50 loop_back kernel: logitech-hidpp-device 0003:046D:405E.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech M720 Triathlon] on usb-0000:38:00.3-4:1
Aug 22 11:28:50 loop_back kernel: hid-generic 0003:1C11:B04D.0008: hiddev1,hidraw5: USB HID v1.11 Device [Input Club Keyboard - K-Type PixelMap USB] on usb-0000:15:00.0-1/input5
Aug 22 11:28:50 loop_back kernel: random: fast init done
Aug 22 11:28:50 loop_back kernel: input: Input Club Keyboard - K-Type PixelMap USB as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-1/1-1:1.6/0003:1C11:B04D.0009/input/input20
Aug 22 11:28:50 loop_back kernel: hid-generic 0003:1C11:B04D.0009: input,hidraw6: USB HID v1.11 Mouse [Input Club Keyboard - K-Type PixelMap USB] on usb-0000:15:00.0-1/input6
Aug 22 11:28:50 loop_back kernel: ata5: SATA link down (SStatus 0 SControl 330)
Aug 22 11:28:50 loop_back kernel: usb 1-8: new full-speed USB device number 3 using xhci_hcd
Aug 22 11:28:50 loop_back kernel: ata6: SATA link down (SStatus 0 SControl 330)
Aug 22 11:28:50 loop_back kernel: usb 1-8: New USB device found, idVendor=8087, idProduct=0aa7, bcdDevice= 0.01
Aug 22 11:28:50 loop_back kernel: usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Aug 22 11:28:50 loop_back kernel: BTRFS info (device nvme0n1p4): disk space caching is enabled
Aug 22 11:28:50 loop_back kernel: BTRFS info (device nvme0n1p4): has skinny extents
Aug 22 11:28:50 loop_back kernel: BTRFS info (device nvme0n1p4): enabling ssd optimizations
Aug 22 11:28:50 loop_back systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
Aug 22 11:28:50 loop_back systemd[1]: Detected architecture x86-64.
Aug 22 11:28:50 loop_back systemd[1]: Set hostname to <loop_back>.
Aug 22 11:28:50 loop_back kernel: random: systemd: uninitialized urandom read (16 bytes read)
Aug 22 11:28:50 loop_back systemd[1]: Created slice system-getty.slice.
Aug 22 11:28:50 loop_back kernel: random: systemd: uninitialized urandom read (16 bytes read)
Aug 22 11:28:50 loop_back systemd[1]: Listening on LVM2 metadata daemon socket.
Aug 22 11:28:50 loop_back kernel: random: systemd: uninitialized urandom read (16 bytes read)
Aug 22 11:28:50 loop_back systemd[1]: Listening on udev Kernel Socket.
Aug 22 11:28:50 loop_back systemd[1]: Listening on Journal Audit Socket.
Aug 22 11:28:50 loop_back systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
Aug 22 11:28:50 loop_back systemd[1]: Listening on Journal Socket (/dev/log).
Aug 22 11:28:50 loop_back systemd[1]: Listening on Device-mapper event daemon FIFOs.
Aug 22 11:28:50 loop_back kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Aug 22 11:28:50 loop_back kernel: random: crng init done
Aug 22 11:28:50 loop_back kernel: random: 7 urandom warning(s) missed due to ratelimiting
Aug 22 11:28:50 loop_back systemd-journald[307]: Journal started
Aug 22 11:28:50 loop_back systemd-journald[307]: Runtime journal (/run/log/journal/6e47ab9dcf224aafbcd2ed9d4725a551) is 6.2M, max 50.0M, 43.7M free.
Aug 22 11:28:50 loop_back systemd-modules-load[313]: Inserted module 'crypto_user'
Aug 22 11:28:50 loop_back systemd-modules-load[313]: Inserted module 'sg'
Aug 22 11:28:50 loop_back systemd-tmpfiles[317]: [/usr/lib/tmpfiles.d/kubernetes.conf:1] Line references path below legacy directory /var/run/, updating /var/run/kubernetes → /run/kubernetes; please update the tmpfiles.d/ drop-in file accordingly.
Aug 22 11:28:50 loop_back systemd-sysctl[320]: Couldn't write '1' to 'net/ipv6/conf/enp8s0/disable_ipv6', ignoring: No such file or directory
Aug 22 11:28:50 loop_back systemd[1]: Starting Flush Journal to Persistent Storage...
Aug 22 11:28:50 loop_back systemd-journald[307]: Time spent on flushing to /var is 5.920ms for 906 entries.
Aug 22 11:28:50 loop_back systemd-journald[307]: System journal (/var/log/journal/6e47ab9dcf224aafbcd2ed9d4725a551) is 62.5M, max 50.0M, 0B free.
Aug 22 11:28:50 loop_back systemd[1]: Started udev Kernel Device Manager.
Aug 22 11:28:50 loop_back systemd[1]: Started udev Coldplug all Devices.
Aug 22 11:28:50 loop_back kernel: acpi_cpufreq: overriding BIOS provided _PSD data
Aug 22 11:28:50 loop_back kernel: rtc_cmos 00:02: RTC can wake from S4
Aug 22 11:28:50 loop_back kernel: rtc_cmos 00:02: registered as rtc0
Aug 22 11:28:50 loop_back kernel: rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Aug 22 11:28:50 loop_back systemd[1]: Started Flush Journal to Persistent Storage.
Aug 22 11:28:50 loop_back mtp-probe[351]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-1"
Aug 22 11:28:50 loop_back mtp-probe[351]: bus: 1, device: 2 was not an MTP device
Aug 22 11:28:50 loop_back kernel: cdc_acm 1-1:1.3: ttyACM0: USB ACM device
Aug 22 11:28:50 loop_back kernel: mousedev: PS/2 mouse device common for all mice
Aug 22 11:28:50 loop_back kernel: usbcore: registered new interface driver cdc_acm
Aug 22 11:28:50 loop_back kernel: cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Aug 22 11:28:50 loop_back mtp-probe[353]: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:08.1/0000:38:00.3/usb3/3-4"
Aug 22 11:28:50 loop_back kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Aug 22 11:28:50 loop_back mtp-probe[353]: bus: 3, device: 2 was not an MTP device
Aug 22 11:28:50 loop_back kernel: piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
Aug 22 11:28:50 loop_back kernel: piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
Aug 22 11:28:50 loop_back kernel: r8169 0000:1b:00.0 eth0: RTL8168h/8111h, 30:9c:23:de:8f:32, XID 54100800, IRQ 81
Aug 22 11:28:50 loop_back kernel: r8169 0000:1b:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Aug 22 11:28:50 loop_back systemd[1]: Found device Samsung SSD 970 EVO 500GB EFI\x20System\x20Partition.
Aug 22 11:28:50 loop_back systemd-udevd[333]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Aug 22 11:28:50 loop_back kernel: sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
Aug 22 11:28:50 loop_back kernel: sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
Aug 22 11:28:50 loop_back kernel: sp5100-tco sp5100-tco: Watchdog hardware is disabled
Aug 22 11:28:50 loop_back kernel: input: PC Speaker as /devices/platform/pcspkr/input/input21
Aug 22 11:28:50 loop_back kernel: cryptd: max_cpu_qlen set to 1000
Aug 22 11:28:50 loop_back kernel: Linux agpgart interface v0.103
Aug 22 11:28:50 loop_back kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
Aug 22 11:28:50 loop_back kernel: AVX2 version of gcm_enc/dec engaged.
Aug 22 11:28:50 loop_back kernel: AES CTR mode by8 optimization enabled
Aug 22 11:28:50 loop_back kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Aug 22 11:28:50 loop_back kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
Aug 22 11:28:50 loop_back kernel: cfg80211: failed to load regulatory.db
Aug 22 11:28:50 loop_back kernel: Bluetooth: Core ver 2.22
Aug 22 11:28:50 loop_back kernel: NET: Registered protocol family 31
Aug 22 11:28:50 loop_back kernel: Bluetooth: HCI device and connection manager initialized
Aug 22 11:28:50 loop_back kernel: Bluetooth: HCI socket layer initialized
Aug 22 11:28:50 loop_back kernel: Bluetooth: L2CAP socket layer initialized
Aug 22 11:28:50 loop_back kernel: Bluetooth: SCO socket layer initialized
Aug 22 11:28:50 loop_back kernel: usbcore: registered new interface driver btusb
Aug 22 11:28:50 loop_back kernel: Intel(R) Wireless WiFi driver for Linux
Aug 22 11:28:50 loop_back kernel: Copyright(c) 2003- 2015 Intel Corporation
Aug 22 11:28:50 loop_back kernel: iwlwifi 0000:1c:00.0: enabling device (0000 -> 0002)
Aug 22 11:28:50 loop_back systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Aug 22 11:28:50 loop_back systemd[1]: Starting Load/Save RF Kill Switch Status...
Aug 22 11:28:50 loop_back kernel: iwlwifi 0000:1c:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
Aug 22 11:28:50 loop_back kernel: snd_hda_intel 0000:38:00.1: Handle vga_switcheroo audio client
Aug 22 11:28:50 loop_back kernel: Bluetooth: hci0: read Intel version: 370810225019140f36
Aug 22 11:28:50 loop_back kernel: Bluetooth: hci0: Intel device is already patched. patch num: 36
Aug 22 11:28:50 loop_back systemd-udevd[329]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Aug 22 11:28:50 loop_back kernel: r8169 0000:1b:00.0 enp27s0: renamed from eth0
Aug 22 11:28:50 loop_back kernel: input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input22
Aug 22 11:28:50 loop_back kernel: input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input23
Aug 22 11:28:50 loop_back systemd[1]: Started Load/Save RF Kill Switch Status.
Aug 22 11:28:50 loop_back kernel: snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
Aug 22 11:28:50 loop_back kernel: snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Aug 22 11:28:50 loop_back kernel: snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
Aug 22 11:28:50 loop_back kernel: snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
Aug 22 11:28:50 loop_back kernel: snd_hda_codec_realtek hdaudioC1D0:    inputs:
Aug 22 11:28:50 loop_back kernel: snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
Aug 22 11:28:50 loop_back kernel: snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
Aug 22 11:28:50 loop_back kernel: snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
Aug 22 11:28:50 loop_back kernel: input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input24
Aug 22 11:28:50 loop_back kernel: input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input25
Aug 22 11:28:50 loop_back kernel: input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input26
Aug 22 11:28:50 loop_back kernel: input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input27
Aug 22 11:28:50 loop_back kernel: input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input28
Aug 22 11:28:50 loop_back kernel: kvm: disabled by bios
Aug 22 11:28:50 loop_back kernel: MCE: In-kernel MCE decoding enabled.
Aug 22 11:28:50 loop_back kernel: EDAC amd64: Node 0: DRAM ECC disabled.
Aug 22 11:28:50 loop_back kernel: EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                                   Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                                   (Note that use of the override may cause unknown side effects.)
Aug 22 11:28:50 loop_back kernel: iwlwifi 0000:1c:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220
Aug 22 11:28:50 loop_back kernel: iwlwifi 0000:1c:00.0: base HW address: 60:f6:77:f7:af:26
Aug 22 11:28:50 loop_back kernel: EDAC amd64: Node 0: DRAM ECC disabled.
Aug 22 11:28:50 loop_back kernel: EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                                   Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                                   (Note that use of the override may cause unknown side effects.)
Aug 22 11:28:50 loop_back systemd-udevd[348]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Aug 22 11:28:50 loop_back kernel: ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
Aug 22 11:28:50 loop_back kernel: thermal thermal_zone0: failed to read out thermal zone (-61)
Aug 22 11:28:50 loop_back kernel: iwlwifi 0000:1c:00.0 wlp28s0: renamed from wlan0
Aug 22 11:28:50 loop_back kernel: [drm] amdgpu kernel modesetting enabled.
Aug 22 11:28:50 loop_back kernel: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
Aug 22 11:28:50 loop_back kernel: Parsing CRAT table with 1 nodes
Aug 22 11:28:50 loop_back kernel: Creating topology SYSFS entries
Aug 22 11:28:50 loop_back kernel: Topology: Add APU node [0x0:0x0]
Aug 22 11:28:50 loop_back kernel: Finished initializing topology
Aug 22 11:28:50 loop_back kernel: kfd kfd: Initialized module
Aug 22 11:28:50 loop_back kernel: checking generic (e0000000 300000) vs hw (e0000000 10000000)
Aug 22 11:28:50 loop_back kernel: fb: switching to amdgpudrmfb from EFI VGA
Aug 22 11:28:50 loop_back kernel: Console: switching to colour dummy device 80x25
Aug 22 11:28:50 loop_back kernel: [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1462:0x7A40 0xC6).
Aug 22 11:28:50 loop_back kernel: [drm] register mmio base: 0xFE400000
Aug 22 11:28:50 loop_back kernel: [drm] register mmio size: 524288
Aug 22 11:28:50 loop_back kernel: [drm] probing gen 2 caps for device 1022:15db = 700d03/e
Aug 22 11:28:50 loop_back kernel: [drm] probing mlw for device 1022:15db = 700d03
Aug 22 11:28:50 loop_back kernel: [drm] add ip block number 0 <soc15_common>
Aug 22 11:28:50 loop_back kernel: [drm] add ip block number 1 <gmc_v9_0>
Aug 22 11:28:50 loop_back kernel: [drm] add ip block number 2 <vega10_ih>
Aug 22 11:28:50 loop_back kernel: [drm] add ip block number 3 <psp>
Aug 22 11:28:50 loop_back kernel: [drm] add ip block number 4 <powerplay>
Aug 22 11:28:50 loop_back kernel: [drm] add ip block number 5 <dm>
Aug 22 11:28:50 loop_back kernel: [drm] add ip block number 6 <gfx_v9_0>
Aug 22 11:28:50 loop_back kernel: [drm] add ip block number 7 <sdma_v4_0>
Aug 22 11:28:50 loop_back kernel: [drm] add ip block number 8 <vcn_v1_0>
Aug 22 11:28:50 loop_back kernel: kfd kfd: DID 15dd is missing in supported_devices
Aug 22 11:28:50 loop_back kernel: kfd kfd: kgd2kfd_probe failed
Aug 22 11:28:50 loop_back kernel: [drm] VCN decode is enabled in VM mode
Aug 22 11:28:50 loop_back kernel: [drm] VCN encode is enabled in VM mode
Aug 22 11:28:50 loop_back kernel: [drm] BIOS signature incorrect 0 0
Aug 22 11:28:50 loop_back kernel: ATOM BIOS: 113-RAVEN-106
Aug 22 11:28:50 loop_back kernel: [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
Aug 22 11:28:50 loop_back kernel: amdgpu 0000:38:00.0: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used)
Aug 22 11:28:50 loop_back kernel: amdgpu 0000:38:00.0: GTT: 1024M 0x000000F500000000 - 0x000000F53FFFFFFF
Aug 22 11:28:50 loop_back kernel: [drm] Detected VRAM RAM=1024M, BAR=1024M
Aug 22 11:28:50 loop_back kernel: [drm] RAM width 128bits DDR4
Aug 22 11:28:50 loop_back kernel: [TTM] Zone  kernel: Available graphics memory: 7703726 kiB
Aug 22 11:28:50 loop_back kernel: [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
Aug 22 11:28:50 loop_back kernel: [TTM] Initializing pool allocator
Aug 22 11:28:50 loop_back kernel: [TTM] Initializing DMA pool allocator
Aug 22 11:28:50 loop_back kernel: [drm] amdgpu: 1024M of VRAM memory ready
Aug 22 11:28:50 loop_back kernel: [drm] amdgpu: 3072M of GTT memory ready.
Aug 22 11:28:50 loop_back kernel: [drm] GART: num cpu pages 262144, num gpu pages 262144
Aug 22 11:28:50 loop_back kernel: [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
Aug 22 11:28:50 loop_back kernel: [drm] use_doorbell being set to: [true]
Aug 22 11:28:50 loop_back kernel: [drm] Found VCN firmware Version: 1.73 Family ID: 18
Aug 22 11:28:51 loop_back kernel: amdgpu: [powerplay] dpm has been enabled
Aug 22 11:28:51 loop_back kernel: [drm] Display Core initialized with v3.1.44!
Aug 22 11:28:51 loop_back kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Aug 22 11:28:51 loop_back kernel: [drm] Driver supports precise vblank timestamp query.
Aug 22 11:28:51 loop_back kernel: [drm] VCN decode and encode initialized successfully.
Aug 22 11:28:51 loop_back kernel: [drm] fb mappable at 0xA1100000
Aug 22 11:28:51 loop_back kernel: [drm] vram apper at 0xA0000000
Aug 22 11:28:51 loop_back kernel: [drm] size 14745600
Aug 22 11:28:51 loop_back kernel: [drm] fb depth is 24
Aug 22 11:28:51 loop_back kernel: [drm]    pitch is 10240
Aug 22 11:28:51 loop_back kernel: fbcon: amdgpudrmfb (fb0) is primary device
Aug 22 11:28:51 loop_back kernel: Console: switching to colour frame buffer device 320x90
Aug 22 11:28:51 loop_back kernel: amdgpu 0000:38:00.0: fb0: amdgpudrmfb frame buffer device
Aug 22 11:28:51 loop_back kernel: amdgpu 0000:38:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0
Aug 22 11:28:51 loop_back kernel: amdgpu 0000:38:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0
Aug 22 11:28:51 loop_back kernel: amdgpu 0000:38:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0
Aug 22 11:28:51 loop_back kernel: amdgpu 0000:38:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0
Aug 22 11:28:51 loop_back kernel: amdgpu 0000:38:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0
Aug 22 11:28:51 loop_back kernel: amdgpu 0000:38:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0
Aug 22 11:28:51 loop_back kernel: amdgpu 0000:38:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0
Aug 22 11:28:51 loop_back kernel: amdgpu 0000:38:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0
Aug 22 11:28:51 loop_back kernel: amdgpu 0000:38:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0
Aug 22 11:28:51 loop_back kernel: amdgpu 0000:38:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0
Aug 22 11:28:51 loop_back kernel: amdgpu 0000:38:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1
Aug 22 11:28:51 loop_back kernel: amdgpu 0000:38:00.0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1
Aug 22 11:28:51 loop_back kernel: amdgpu 0000:38:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1
Aug 22 11:28:51 loop_back kernel: amdgpu 0000:38:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1
Aug 22 11:28:51 loop_back kernel: [drm] Initialized amdgpu 3.26.0 20150101 for 0000:38:00.0 on minor 0
Aug 22 11:28:51 loop_back systemd-udevd[348]: Process '/usr/local/bin/amrandr' failed with exit code 127.
Aug 22 11:28:51 loop_back systemd-udevd[330]: Process '/usr/local/bin/amrandr' failed with exit code 127.
Aug 22 11:28:51 loop_back systemd-udevd[330]: Process '/usr/local/bin/amrandr' failed with exit code 127.
Aug 22 11:28:51 loop_back systemd-udevd[330]: Process '/usr/local/bin/amrandr' failed with exit code 127.
Aug 22 11:28:51 loop_back systemd-udevd[330]: Process '/usr/local/bin/amrandr' failed with exit code 127.
Aug 22 11:28:52 loop_back systemd[1]: Found device ST1000LM024_HN-M101MBB Bridge.
Aug 22 11:28:52 loop_back systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
Aug 22 11:28:52 loop_back systemd[1]: Reached target Local File Systems (Pre).
Aug 22 11:28:52 loop_back systemd[1]: Starting File System Check on /dev/disk/by-uuid/9AF2-43D9...
Aug 22 11:28:52 loop_back systemd[1]: Mounting /mnt/bridge...
Aug 22 11:28:52 loop_back systemd-fsck[465]: fsck.fat 4.1 (2017-01-24)
Aug 22 11:28:52 loop_back systemd-fsck[465]: /dev/nvme0n1p1: 16 files, 32216/130812 clusters
Aug 22 11:28:52 loop_back systemd[1]: Started File System Check on /dev/disk/by-uuid/9AF2-43D9.
Aug 22 11:28:52 loop_back systemd[1]: Mounting /esp...
Aug 22 11:28:52 loop_back systemd[1]: Mounted /esp.
Aug 22 11:28:52 loop_back systemd[1]: boot.mount: Directory /boot to mount over is not empty, mounting anyway.
Aug 22 11:28:52 loop_back systemd[1]: Mounting /boot...
Aug 22 11:28:52 loop_back systemd[1]: Mounted /boot.
Aug 22 11:28:52 loop_back systemd[1]: Mounted /mnt/bridge.
Aug 22 11:28:52 loop_back kernel: EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: data=ordered
Aug 22 11:28:52 loop_back systemd[1]: Reached target Local File Systems.
Aug 22 11:28:52 loop_back systemd[1]: Starting Create Volatile Files and Directories...
Aug 22 11:28:52 loop_back systemd-tmpfiles[477]: [/usr/lib/tmpfiles.d/kubernetes.conf:1] Line references path below legacy directory /var/run/, updating /var/run/kubernetes → /run/kubernetes; please update the tmpfiles.d/ drop-in file accordingly.
Aug 22 11:28:52 loop_back systemd[1]: Started Create Volatile Files and Directories.
Aug 22 11:28:52 loop_back systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Aug 22 11:28:52 loop_back systemd[1]: Starting Network Time Synchronization...
Aug 22 11:28:52 loop_back systemd[1]: Started Update UTMP about System Boot/Shutdown.
Aug 22 11:28:52 loop_back systemd[1]: Started Network Time Synchronization.
Aug 22 11:28:52 loop_back systemd[1]: Reached target System Initialization.
Aug 22 11:28:52 loop_back systemd[1]: Listening on D-Bus System Message Bus Socket.
Aug 22 11:28:52 loop_back systemd[1]: Started Daily Cleanup of Temporary Directories.
Aug 22 11:28:52 loop_back systemd[1]: Listening on CUPS Scheduler.
Aug 22 11:28:52 loop_back systemd[1]: Reached target Sockets.
Aug 22 11:28:52 loop_back systemd[1]: Started CUPS Scheduler.
Aug 22 11:28:52 loop_back systemd[1]: Reached target Paths.
Aug 22 11:28:52 loop_back systemd[1]: Reached target Basic System.
Aug 22 11:28:52 loop_back systemd[1]: Started Periodic Command Scheduler.
Aug 22 11:28:52 loop_back systemd[1]: Starting dhcpcd on all interfaces...
Aug 22 11:28:52 loop_back systemd[1]: Starting Save/Restore Sound Card State...
Aug 22 11:28:52 loop_back crond[482]: (CRON) INFO (Syslog will be used instead of sendmail.)
Aug 22 11:28:52 loop_back crond[482]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 82% if used.)
Aug 22 11:28:52 loop_back systemd[1]: Started D-Bus System Message Bus.
Aug 22 11:28:52 loop_back crond[482]: (CRON) INFO (running with inotify support)
Aug 22 11:28:52 loop_back systemd[1]: Starting Daemon for power management...
Aug 22 11:28:52 loop_back systemd[1]: Starting Bluetooth service...
Aug 22 11:28:52 loop_back systemd[1]: Starting /etc/rc.local compatibility...
Aug 22 11:28:52 loop_back systemd[1]: Starting Login Service...
Aug 22 11:28:52 loop_back systemd[1]: Reached target System Time Synchronized.
Aug 22 11:28:52 loop_back systemd[1]: Started Daily rotation of log files.
Aug 22 11:28:52 loop_back systemd[1]: Started Daily verification of password and group files.
Aug 22 11:28:52 loop_back systemd[1]: Started Daily man-db cache update.
Aug 22 11:28:52 loop_back systemd[1]: Reached target Timers.
Aug 22 11:28:52 loop_back systemd[1]: Started Save/Restore Sound Card State.
Aug 22 11:28:52 loop_back systemd[1]: Started /etc/rc.local compatibility.
Aug 22 11:28:52 loop_back systemd[1]: Reached target Sound Card.
Aug 22 11:28:52 loop_back dhcpcd[483]: dev: loaded udev
Aug 22 11:28:52 loop_back systemd-timesyncd[479]: request_name_destroy_callback n_ref=1
Aug 22 11:28:52 loop_back bluetoothd[487]: Bluetooth daemon 5.50
Aug 22 11:28:52 loop_back systemd[1]: Started Bluetooth service.
Aug 22 11:28:52 loop_back systemd[1]: Reached target Bluetooth.
Aug 22 11:28:52 loop_back bluetoothd[487]: Starting SDP server
Aug 22 11:28:52 loop_back kernel: 8021q: 802.1Q VLAN Support v1.8
Aug 22 11:28:52 loop_back dhcpcd[483]: forked to background, child pid 492
Aug 22 11:28:52 loop_back systemd-logind[489]: New seat seat0.
Aug 22 11:28:52 loop_back systemd[1]: Started dhcpcd on all interfaces.
Aug 22 11:28:52 loop_back systemd[1]: Reached target Network.
Aug 22 11:28:53 loop_back systemd[1]: Starting CUPS Scheduler...
Aug 22 11:28:53 loop_back systemd[1]: Starting Permit User Sessions...
Aug 22 11:28:53 loop_back systemd-logind[489]: Watching system buttons on /dev/input/event1 (Power Button)
Aug 22 11:28:53 loop_back systemd-logind[489]: Watching system buttons on /dev/input/event0 (Power Button)
Aug 22 11:28:53 loop_back systemd-logind[489]: Watching system buttons on /dev/input/event2 (Input Club Keyboard - K-Type PixelMap USB)
Aug 22 11:28:53 loop_back systemd-logind[489]: Watching system buttons on /dev/input/event3 (Input Club Keyboard - K-Type PixelMap USB)
Aug 22 11:28:53 loop_back systemd-logind[489]: Watching system buttons on /dev/input/event4 (Input Club Keyboard - K-Type PixelMap USB System Control)
Aug 22 11:28:53 loop_back systemd-logind[489]: Watching system buttons on /dev/input/event5 (Input Club Keyboard - K-Type PixelMap USB Consumer Control)
Aug 22 11:28:53 loop_back kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Aug 22 11:28:53 loop_back kernel: Bluetooth: BNEP filters: protocol multicast
Aug 22 11:28:53 loop_back kernel: Bluetooth: BNEP socket layer initialized
Aug 22 11:28:53 loop_back bluetoothd[487]: Bluetooth management interface 1.14 initialized
Aug 22 11:28:53 loop_back dbus-daemon[485]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.6' (uid=0 pid=487 comm="/usr/lib/bluetooth/bluetoothd ")
Aug 22 11:28:53 loop_back dbus-daemon[485]: [system] Activating via systemd: service name='org.freedesktop.login1' unit='dbus-org.freedesktop.login1.service' requested by ':1.13' (uid=0 pid=486 comm="/usr/lib/upower/upowerd ")
Aug 22 11:28:53 loop_back systemd[1]: Started Permit User Sessions.
Aug 22 11:28:53 loop_back systemd[1]: Started Getty on tty1.
Aug 22 11:28:53 loop_back systemd[1]: Reached target Login Prompts.
Aug 22 11:28:53 loop_back systemd[1]: Starting Hostname Service...
Aug 22 11:28:53 loop_back dbus-daemon[485]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service' requested by ':1.14' (uid=0 pid=494 comm="/usr/bin/cupsd -l ")
Aug 22 11:28:53 loop_back systemd[1]: Starting Manage, Install and Generate Color Profiles...
Aug 22 11:28:53 loop_back dbus-daemon[485]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Aug 22 11:28:53 loop_back systemd[1]: Started Manage, Install and Generate Color Profiles.
Aug 22 11:28:53 loop_back dhcpcd[492]: enp27s0: waiting for carrier
Aug 22 11:28:53 loop_back kernel: r8169 0000:1b:00.0 enp27s0: link down
Aug 22 11:28:53 loop_back systemd-logind[489]: Watching system buttons on /dev/input/event6 (Logitech M720 Triathlon)
Aug 22 11:28:53 loop_back colord[512]: failed to get session [pid 494]: No data available
Aug 22 11:28:53 loop_back systemd[1]: Started CUPS Scheduler.
Aug 22 11:28:53 loop_back dhcpcd[492]: wlp28s0: waiting for carrier
Aug 22 11:28:53 loop_back dhcpcd[492]: wlp28s0: carrier acquired
Aug 22 11:28:53 loop_back dhcpcd[492]: DUID 00:01:00:01:22:1e:fc:7f:68:17:29:2a:36:0e
Aug 22 11:28:53 loop_back dhcpcd[492]: wlp28s0: IAID 77:f7:af:26
Aug 22 11:28:53 loop_back dhcpcd[492]: wlp28s0: adding address fe80::dc15:4b86:ba11:50b4
Aug 22 11:28:53 loop_back dhcpcd[492]: ipv6_addaddr1: Permission denied
Aug 22 11:28:53 loop_back dhcpcd[492]: wlp28s0: carrier lost
Aug 22 11:28:53 loop_back dbus-daemon[485]: [system] Successfully activated service 'org.freedesktop.hostname1'
Aug 22 11:28:53 loop_back systemd[1]: Started Hostname Service.
Aug 22 11:28:53 loop_back dbus-daemon[485]: [system] Successfully activated service 'org.freedesktop.login1'
Aug 22 11:28:53 loop_back systemd[1]: Started Login Service.
Aug 22 11:28:53 loop_back systemd[1]: Reached target Multi-User System.
Aug 22 11:28:53 loop_back systemd[1]: Started Daemon for power management.
Aug 22 11:28:53 loop_back systemd[1]: Reached target Graphical Interface.
Aug 22 11:28:53 loop_back systemd[1]: Startup finished in 12.998s (firmware) + 20ms (loader) + 5.443s (kernel) + 3.073s (userspace) = 21.535s.
Aug 22 11:28:57 loop_back kernel: audit: type=1006 audit(1534951737.696:2): pid=504 uid=0 old-auid=4294967295 auid=0 tty=tty1 old-ses=4294967295 ses=1 res=1
Aug 22 11:28:57 loop_back login[504]: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
Aug 22 11:28:57 loop_back systemd[1]: Created slice system-user\x2druntime\x2ddir.slice.
Aug 22 11:28:57 loop_back systemd[1]: Started /run/user/0 mount wrapper.
Aug 22 11:28:57 loop_back systemd[1]: Created slice User Slice of UID 0.
Aug 22 11:28:57 loop_back systemd[1]: Starting User Manager for UID 0...
Aug 22 11:28:57 loop_back systemd-logind[489]: New session 1 of user root.
Aug 22 11:28:57 loop_back systemd[1]: Started Session 1 of user root.
Aug 22 11:28:57 loop_back kernel: audit: type=1006 audit(1534951737.716:3): pid=557 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=2 res=1
Aug 22 11:28:57 loop_back systemd[557]: pam_unix(systemd-user:session): session opened for user root by (uid=0)
Aug 22 11:28:57 loop_back systemd[557]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).
Aug 22 11:28:57 loop_back systemd[557]: Listening on GnuPG cryptographic agent and passphrase cache.
Aug 22 11:28:57 loop_back systemd[557]: Reached target Paths.
Aug 22 11:28:57 loop_back systemd[557]: Listening on GnuPG network certificate management daemon.
Aug 22 11:28:57 loop_back systemd[557]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
Aug 22 11:28:57 loop_back systemd[557]: Reached target Timers.
Aug 22 11:28:57 loop_back systemd[557]: Starting D-Bus User Message Bus Socket.
Aug 22 11:28:57 loop_back systemd[557]: Listening on p11-kit server.
Aug 22 11:28:57 loop_back systemd[557]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
Aug 22 11:28:57 loop_back systemd[557]: Listening on D-Bus User Message Bus Socket.
Aug 22 11:28:57 loop_back systemd[557]: Reached target Sockets.
Aug 22 11:28:57 loop_back systemd[557]: Reached target Basic System.
Aug 22 11:28:57 loop_back systemd[557]: Reached target Default.
Aug 22 11:28:57 loop_back systemd[557]: Startup finished in 41ms.
Aug 22 11:28:57 loop_back systemd[1]: Started User Manager for UID 0.
Aug 22 11:28:57 loop_back login[504]: ROOT LOGIN ON tty1
Aug 22 11:29:22 loop_back kernel: sysrq: SysRq : Terminate All Tasks
Aug 22 11:29:22 loop_back systemd-journald[307]: Journal stopped
Aug 22 11:29:22 loop_back systemd-journald[307]: Received SIGTERM.
Aug 22 11:29:22 loop_back systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.
Aug 22 11:29:22 loop_back systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
Aug 22 11:29:22 loop_back systemd[1]: systemd-timesyncd.service: Service has no hold-off time (RestartSec=0), scheduling restart.
Aug 22 11:29:22 loop_back systemd[1]: systemd-timesyncd.service: Scheduled restart job, restart counter is at 1.
Aug 22 11:29:22 loop_back systemd[1]: Stopped Network Time Synchronization.
Aug 22 11:29:22 loop_back systemd[1]: Starting Network Time Synchronization...
Aug 22 11:29:22 loop_back systemd[1]: Stopped Flush Journal to Persistent Storage.
Aug 22 11:29:22 loop_back systemd[1]: Stopping Flush Journal to Persistent Storage...
Aug 22 11:29:22 loop_back systemd[1]: Stopped Journal Service.
Aug 22 11:29:22 loop_back systemd[1]: Starting Journal Service...
Aug 22 11:29:22 loop_back kernel: audit: type=1305 audit(1534951762.400:4): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 res=1
Aug 22 11:29:22 loop_back systemd-journald[612]: Journal started
Aug 22 11:29:22 loop_back systemd-journald[612]: System journal (/var/log/journal/6e47ab9dcf224aafbcd2ed9d4725a551) is 62.5M, max 50.0M, 0B free.
Aug 22 11:29:22 loop_back audit: CONFIG_CHANGE audit_enabled=1 old=1 auid=4294967295 ses=4294967295 res=1
Aug 22 11:29:22 loop_back systemd-udevd[344]: Process '/usr/bin/xinput disable 'SynPS/2 Synaptics TouchPad'' terminated by signal TERM.
Aug 22 11:29:22 loop_back bluetoothd[487]: Terminating
Aug 22 11:29:22 loop_back systemd-udevd[328]: Process '/usr/bin/xinput disable 'SynPS/2 Synaptics TouchPad'' terminated by signal TERM.
Aug 22 11:29:22 loop_back bluetoothd[487]: Disconnected from D-Bus. Exiting.
Aug 22 11:29:22 loop_back systemd[557]: Stopped target Default.
Aug 22 11:29:22 loop_back bluetoothd[487]: Stopping SDP server
Aug 22 11:29:22 loop_back dhcpcd[604]: dhcpcd not running
Aug 22 11:29:22 loop_back systemd[557]: Stopped target Basic System.
Aug 22 11:29:22 loop_back bluetoothd[487]: Exit
Aug 22 11:29:22 loop_back systemd[557]: Stopped target Sockets.
Aug 22 11:29:22 loop_back dhcpcd[492]: received SIGTERM, stopping
Aug 22 11:29:22 loop_back systemd[557]: Closed GnuPG cryptographic agent and passphrase cache.
Aug 22 11:29:22 loop_back dhcpcd[492]: wlp28s0: removing interface
Aug 22 11:29:22 loop_back systemd[557]: Closed D-Bus User Message Bus Socket.
Aug 22 11:29:22 loop_back login[504]: pam_unix(login:session): session closed for user root
Aug 22 11:29:22 loop_back systemd[557]: Closed GnuPG cryptographic agent and passphrase cache (restricted).
Aug 22 11:29:22 loop_back dhcpcd[492]: enp27s0: removing interface
Aug 22 11:29:22 loop_back systemd[557]: Closed p11-kit server.
Aug 22 11:29:22 loop_back dhcpcd[492]: dhcpcd exited
Aug 22 11:29:22 loop_back systemd[557]: Closed GnuPG network certificate management daemon.
Aug 22 11:29:22 loop_back crond[482]: (CRON) INFO (Shutting down)
Aug 22 11:29:22 loop_back systemd[557]: Closed GnuPG cryptographic agent (ssh-agent emulation).
Aug 22 11:29:22 loop_back dbus-daemon[605]: [system] Activating via systemd: service name='org.freedesktop.login1' unit='dbus-org.freedesktop.login1.service' requested by ':1.1' (uid=0 pid=504 comm="login -- root         ")
Aug 22 11:29:22 loop_back systemd[557]: Closed GnuPG cryptographic agent and passphrase cache (access for web browsers).
Aug 22 11:29:22 loop_back dhcpcd[604]: dhcpcd not running
Aug 22 11:29:22 loop_back systemd[557]: Stopped target Paths.
Aug 22 11:29:22 loop_back systemd[557]: Reached target Shutdown.
Aug 22 11:29:22 loop_back systemd[557]: Starting Exit the Session...
Aug 22 11:29:22 loop_back systemd[557]: Stopped target Timers.
Aug 22 11:29:22 loop_back systemd[1]: user-runtime-dir@0.service: Unit not needed anymore. Stopping.
Aug 22 11:29:22 loop_back systemd[1]: Started D-Bus System Message Bus.
Aug 22 11:29:22 loop_back systemd[1]: Stopping /run/user/0 mount wrapper...
Aug 22 11:29:22 loop_back systemd[1]: Starting Flush Journal to Persistent Storage...
Aug 22 11:29:22 loop_back systemd[1]: Started udev Kernel Device Manager.
Aug 22 11:29:22 loop_back systemd[1]: Started Flush Journal to Persistent Storage.
Aug 22 11:29:22 loop_back systemd[1]: cronie.service: Service RestartSec=100ms expired, scheduling restart.
Aug 22 11:29:22 loop_back systemd[1]: cronie.service: Scheduled restart job, restart counter is at 1.
Aug 22 11:29:22 loop_back systemd[1]: Started Network Time Synchronization.
Aug 22 11:29:22 loop_back systemd[1]: Stopped Periodic Command Scheduler.
Aug 22 11:29:22 loop_back systemd-timesyncd[611]: request_name_destroy_callback n_ref=1
Aug 22 11:29:22 loop_back systemd[1]: Started Periodic Command Scheduler.
Aug 22 11:29:22 loop_back crond[621]: (CRON) INFO (Syslog will be used instead of sendmail.)
Aug 22 11:29:22 loop_back crond[621]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 97% if used.)
Aug 22 11:29:22 loop_back crond[621]: (CRON) INFO (running with inotify support)
Aug 22 11:29:22 loop_back crond[621]: (CRON) INFO (@reboot jobs will be run at computer's startup.)
Aug 22 11:29:22 loop_back systemd[1]: systemd-logind.service: Service has no hold-off time (RestartSec=0), scheduling restart.
Aug 22 11:29:22 loop_back systemd[1]: systemd-logind.service: Scheduled restart job, restart counter is at 1.
Aug 22 11:29:22 loop_back systemd[1]: Stopped Login Service.
Aug 22 11:29:22 loop_back systemd[1]: Starting Login Service...
Aug 22 11:29:22 loop_back systemd-logind[622]: New seat seat0.
Aug 22 11:29:22 loop_back systemd-logind[622]: Watching system buttons on /dev/input/event1 (Power Button)
Aug 22 11:29:22 loop_back systemd-logind[622]: Watching system buttons on /dev/input/event0 (Power Button)
Aug 22 11:29:22 loop_back systemd-logind[622]: Watching system buttons on /dev/input/event2 (Input Club Keyboard - K-Type PixelMap USB)
Aug 22 11:29:22 loop_back systemd-logind[622]: Watching system buttons on /dev/input/event3 (Input Club Keyboard - K-Type PixelMap USB)
Aug 22 11:29:22 loop_back systemd-logind[622]: Watching system buttons on /dev/input/event4 (Input Club Keyboard - K-Type PixelMap USB System Control)
Aug 22 11:29:22 loop_back systemd-logind[622]: Watching system buttons on /dev/input/event5 (Input Club Keyboard - K-Type PixelMap USB Consumer Control)
Aug 22 11:29:22 loop_back systemd-logind[622]: Watching system buttons on /dev/input/event6 (Logitech M720 Triathlon)
Aug 22 11:29:23 loop_back dbus-daemon[605]: [system] Successfully activated service 'org.freedesktop.login1'
Aug 22 11:29:23 loop_back systemd[1]: Started Login Service.
Aug 22 11:29:23 loop_back systemd-logind[622]: New session 1 of user root.
Aug 22 11:29:23 loop_back systemd[1]: Started /run/user/0 mount wrapper.
Aug 22 11:29:23 loop_back systemd[1]: Starting User Manager for UID 0...
Aug 22 11:29:23 loop_back kernel: audit: type=1006 audit(1534951763.130:5): pid=626 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1
Aug 22 11:29:23 loop_back systemd[1]: getty@tty1.service: Service has no hold-off time (RestartSec=0), scheduling restart.
Aug 22 11:29:23 loop_back systemd[1]: getty@tty1.service: Scheduled restart job, restart counter is at 1.
Aug 22 11:29:23 loop_back systemd[1]: Stopped Getty on tty1.
Aug 22 11:29:23 loop_back systemd[1]: Started Getty on tty1.
Aug 22 11:29:23 loop_back systemd[626]: pam_unix(systemd-user:session): session opened for user root by (uid=0)
Aug 22 11:29:23 loop_back systemd[626]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).
Aug 22 11:29:23 loop_back systemd[626]: Reached target Timers.
Aug 22 11:29:23 loop_back systemd[626]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
Aug 22 11:29:23 loop_back systemd[626]: Listening on p11-kit server.
Aug 22 11:29:23 loop_back systemd[626]: Reached target Paths.
Aug 22 11:29:23 loop_back systemd[626]: Starting D-Bus User Message Bus Socket.
Aug 22 11:29:23 loop_back systemd[626]: Listening on GnuPG cryptographic agent and passphrase cache.
Aug 22 11:29:23 loop_back systemd[626]: Listening on GnuPG network certificate management daemon.
Aug 22 11:29:23 loop_back systemd[626]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
Aug 22 11:29:23 loop_back systemd[626]: Listening on D-Bus User Message Bus Socket.
Aug 22 11:29:23 loop_back systemd[626]: Reached target Sockets.
Aug 22 11:29:23 loop_back systemd[626]: Reached target Basic System.
Aug 22 11:29:23 loop_back systemd[626]: Reached target Default.
Aug 22 11:29:23 loop_back systemd[626]: Startup finished in 49ms.
Aug 22 11:29:23 loop_back systemd[1]: Started User Manager for UID 0.
Aug 22 11:29:26 loop_back kernel: audit: type=1006 audit(1534951766.470:6): pid=627 uid=0 old-auid=4294967295 auid=0 tty=tty1 old-ses=4294967295 ses=4 res=1
Aug 22 11:29:26 loop_back login[627]: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
Aug 22 11:29:26 loop_back login[627]: pam_systemd(login:session): Cannot create session: Already occupied by a session
Aug 22 11:29:26 loop_back login[627]: ROOT LOGIN ON tty1
Aug 22 11:29:43 loop_back systemd-logind[622]: Session 1 logged out. Waiting for processes to exit.

Last edited by xrxr (2018-08-22 15:54:30)

xrxr

Member

Registered: 2015-08-01

Posts: 14

Re: [SOLVED] Starting Xorg hangs when using mesa 18.* on Ryzen 2400g

So uh, funny story. I was fed up and was getting ready to bisect mesa. Building mesa requires libglvnd, which I needed to install. When I tried to install it, pacman told me that it's in conflict with nvidia-libgl-beta.
I figured that nvidia-libgl-beta might be culprit and indeed it was. After removing it startx works on mesa 18.1.6-1!
The 2 hours I spent waiting for llvm-svn to build was worth it after all