You are not logged in.

#1 2018-09-08 16:48:10

zenerve
Member
Registered: 2013-04-27
Posts: 8

Touchpad not working - even with LTS 4.14 kernel ACER R131T

Hello all

I own two same laptops, ACER R131T

Upon upgrade of my daughter's, touchpad stopped working.

She's on up-to-date Arch (4.18.6). I am on an outdated ubuntu 16.10 (4.8.0).

The difference I see between the two are in lsmod, where on mine I have two i2c_designware_(something) modules loaded and not on my daughter's

remmod these on my laptop kills the touchpad

modprobe them on my daughter's laptop doesn't load them (as I can see with lsmod|grep i2c)


I can find in my daughter's laptop one i2c_designware-pci.ko file, on my laptop there are three of them:

  /lib/modules/4.8.0-54-generic/kernel/drivers/i2c/busses/i2c-designware-core.ko
  /lib/modules/4.8.0-54-generic/kernel/drivers/i2c/busses/i2c-designware-pci.ko
  /lib/modules/4.8.0-54-generic/kernel/drivers/i2c/busses/i2c-designware-platform.ko


I did try the grub edit "GRUB_CMDLINE_LINUX_DEFAULT="i8042.reset quiet splash"" to no avail. removing and reinserting i2c_hid doesn't work either.

there is an error message at end of boot, says

  i2c_hid i2cèELAN0501:00 Failed to reset device
  i2c_hid i2cèELAN0501:00 Can't add hid device -61


Please send help.

Last edited by zenerve (2018-12-25 13:49:32)

Offline

#2 2018-09-08 17:58:46

loqs
Member
Registered: 2014-03-06
Posts: 17,326

Re: Touchpad not working - even with LTS 4.14 kernel ACER R131T

Please post the dmesg from both kernels.  Was this the upgrade to the 4.18 kernel?  Does the linux-lts kernel also have the issue?

Offline

#3 2018-09-08 19:20:40

zenerve
Member
Registered: 2013-04-27
Posts: 8

Re: Touchpad not working - even with LTS 4.14 kernel ACER R131T

From daughter computer, the one not working. It was a pretty huge upgrade, that machine was 'just working' and during school year I did not want to take any risk. No idea of what the working kernel was.

relevant output from |tail :

   [   30.080416] i2c_hid: probe of i2c-ELAN0501:00 failed with error -61


Output of |grep i2c

  [    5.307773] i2c_hid i2c-INT33D1:00: HID over i2c has not been provided an Int IRQ
  [    5.308382] i2c_hid: probe of i2c-INT33D1:00 failed with error -22
  [    5.313971] i2c_hid i2c-ELAN0501:00: i2c-ELAN0501:00 supply vdd not found, using dummy regulator
  [   10.506731] i2c_hid i2c-ELAN0501:00: failed to reset device.
  [   16.693434] i2c_hid i2c-ELAN0501:00: failed to reset device.
  [   22.880050] i2c_hid i2c-ELAN0501:00: failed to reset device.
  [   29.066805] i2c_hid i2c-ELAN0501:00: failed to reset device.
  [   30.080109] i2c_hid i2c-ELAN0501:00: can't add hid device: -61
  [   30.080416] i2c_hid: probe of i2c-ELAN0501:00 failed with error -61


Output of |tail after rmmod then modprobe i2c_hid 

  [  431.550471] i2c_hid i2c-INT33D1:00: HID over i2c has not been provided an Int IRQ
  [  431.550539] i2c_hid: probe of i2c-INT33D1:00 failed with error -22
  [  431.557247] i2c_hid i2c-ELAN0501:00: i2c-ELAN0501:00 supply vdd not found, using dummy regulator
  [  431.594355] input: ELAN0501:00 04F3:3010 Touchpad as /devices/pci0000:00/808622C1:05/i2c-1/i2c-ELAN0501:00/0018:04F3:3010.0004/input/input19
  [  431.594795] hid-multitouch 0018:04F3:3010.0004: input,hidraw2: I2C HID v1.00 Mouse [ELAN0501:00 04F3:3010] on i2c-ELAN0501:0



From working computer (kernel 4.8.0 on unsupported buntu 16.10)

Output of |grep i2c

  [    2.993467] i2c /dev entries driver
  [    8.755882] input: ELAN0501:00 04F3:3010 Touchpad as /devices/pci0000:00/808622C1:05/i2c-10/i2c-ELAN0501:00/0018:04F3:3010.0003/input/input12
  [    8.756114] hid-multitouch 0018:04F3:3010.0003: input,hidraw1: I2C HID v1.00 Mouse [ELAN0501:00 04F3:3010] on i2c-ELAN0501:00

Last edited by zenerve (2018-09-08 19:28:42)

Offline

#4 2018-09-08 19:31:09

loqs
Member
Registered: 2014-03-06
Posts: 17,326

Re: Touchpad not working - even with LTS 4.14 kernel ACER R131T

Please post the whole output of dmesg in code tags as well as the kernel messages from the last working version on that system.

Offline

#5 2018-09-08 20:22:53

zenerve
Member
Registered: 2013-04-27
Posts: 8

Re: Touchpad not working - even with LTS 4.14 kernel ACER R131T

From current kernel, touchpad not working :

[leila@leilaptophaha ~]$ dmesg
[    0.000000] Linux version 4.18.6-arch1-1-ARCH (builduser@heftig-4211) (gcc version 8.2.1 20180831 (GCC)) #1 SMP PREEMPT Wed Sep 5 11:54:09 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mmcblk0p3
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x00000000712b1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000712b2000-0x0000000071bb1fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000071bb2000-0x000000007657efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007657f000-0x0000000076ebefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000076ebf000-0x0000000077fbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000077fbf000-0x0000000077ffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000077fff000-0x0000000077ffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bc00000-0x000000007bffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c400000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe800000-0x00000000fe80ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0 present.
[    0.000000] DMI: Acer Aspire R3-131T/Aspire R3-131T, BIOS V1.17 11/30/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 0FFA00000 mask FFFE00000 write-protect
[    0.000000]   2 base 000000000 mask F80000000 write-back
[    0.000000]   3 base 07C000000 mask FFC000000 uncachable
[    0.000000]   4 base 07BC00000 mask FFFC00000 uncachable
[    0.000000]   5 base 100000000 mask F80000000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] last_pfn = 0x78000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[    0.000000] BRK [0x17c477000, 0x17c477fff] PGTABLE
[    0.000000] BRK [0x17c478000, 0x17c478fff] PGTABLE
[    0.000000] BRK [0x17c479000, 0x17c479fff] PGTABLE
[    0.000000] BRK [0x17c47a000, 0x17c47afff] PGTABLE
[    0.000000] BRK [0x17c47b000, 0x17c47bfff] PGTABLE
[    0.000000] BRK [0x17c47c000, 0x17c47cfff] PGTABLE
[    0.000000] BRK [0x17c47d000, 0x17c47dfff] PGTABLE
[    0.000000] BRK [0x17c47e000, 0x17c47efff] PGTABLE
[    0.000000] BRK [0x17c47f000, 0x17c47ffff] PGTABLE
[    0.000000] BRK [0x17c480000, 0x17c480fff] PGTABLE
[    0.000000] BRK [0x17c481000, 0x17c481fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x37179000-0x378b3fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x0000000077FFE120 0000A4 (v01 ACRSYS ACRPRDCT 00000003      01000013)
[    0.000000] ACPI: FACP 0x0000000077FF4000 00010C (v05 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: DSDT 0x0000000077FE2000 00C541 (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: FACS 0x0000000077F2F000 000040
[    0.000000] ACPI: UEFI 0x0000000077FFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MSDM 0x0000000077FFC000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: TCPA 0x0000000077FFB000 000032 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: UEFI 0x0000000077FFA000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: SSDT 0x0000000077FF5000 0041CE (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: MCFG 0x0000000077FF2000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: SSDT 0x0000000077FF0000 0005AC (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: SSDT 0x0000000077FEF000 000D41 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: SSDT 0x0000000077FE1000 000763 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x0000000077FE0000 000290 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x0000000077FDF000 00017A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: APIC 0x0000000077FF3000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: SSDT 0x0000000077FDE000 000432 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: TPM2 0x0000000077FDD000 000034 (v03 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: FPDT 0x0000000077FF1000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x17fffc000-0x17fffffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x00000000712b1fff]
[    0.000000]   node   0: [mem 0x0000000071bb2000-0x000000007657efff]
[    0.000000]   node   0: [mem 0x0000000077fff000-0x0000000077ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000017fffffff]
[    0.000000] Reserved but unavailable: 9699 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[    0.000000] On node 0 totalpages: 1006109
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7466 pages used for memmap
[    0.000000]   DMA32 zone: 477824 pages, LIFO batch:31
[    0.000000]   Normal zone: 8192 pages used for memmap
[    0.000000]   Normal zone: 524288 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at [mem 0x7c800000-0x7e7fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x712b2000-0x71bb1fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7657f000-0x76ebefff]
[    0.000000] PM: Registered nosave memory: [mem 0x76ebf000-0x77fbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x77fbf000-0x77ffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x78000000-0x7bbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7bc00000-0x7bffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7c3fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c400000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfe7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfe80ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe810000-0xfe9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed09fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfedbffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 990366
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mmcblk0p3
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3863648K/4024436K available (10252K kernel code, 1298K rwdata, 3524K rodata, 1488K init, 612K bss, 160788K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 33427 entries in 131 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 20736, nr_irqs: 1024, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: (none).
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180531
[    0.003333] APIC: Switch to symmetric I/O mode setup
[    0.003333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.019999] tsc: Detected 1600.000 MHz processor
[    0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[    0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 3201.33 BogoMIPS (lpj=5333333)
[    0.019999] pid_max: default: 32768 minimum: 301
[    0.019999] Security Framework initialized
[    0.019999] Yama: becoming mindful.
[    0.019999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.019999] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.019999] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.019999] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.023465] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.023468] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.023484] mce: CPU supports 6 MCE banks
[    0.023496] CPU0: Thermal monitoring enabled (TM1)
[    0.023502] process: using mwait in idle threads
[    0.023508] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.023510] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[    0.023513] Spectre V2 : Mitigation: Full generic retpoline
[    0.023515] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.023758] Freeing SMP alternatives memory: 28K
[    0.025123] TSC deadline timer enabled
[    0.025128] smpboot: CPU0: Intel(R) Celeron(R) CPU  N3060  @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x4)
[    0.043363] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.043387] ... version:                3
[    0.043389] ... bit width:              40
[    0.043390] ... generic registers:      2
[    0.043392] ... value mask:             000000ffffffffff
[    0.043393] ... max period:             0000007fffffffff
[    0.043395] ... fixed-purpose events:   3
[    0.043396] ... event mask:             0000000700000003
[    0.050013] Hierarchical SRCU implementation.
[    0.070300] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.076680] smp: Bringing up secondary CPUs ...
[    0.116716] x86: Booting SMP configuration:
[    0.116720] .... node  #0, CPUs:      #1
[    0.116858] smp: Brought up 1 node, 2 CPUs
[    0.116858] smpboot: Max logical packages: 2
[    0.116858] smpboot: Total of 2 processors activated (6402.66 BogoMIPS)
[    0.117871] devtmpfs: initialized
[    0.117871] x86/mm: Memory block size: 128MB
[    0.117871] PM: Registering ACPI NVS region [mem 0x76ebf000-0x77fbefff] (17825792 bytes)
[    0.120532] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.120532] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.120532] pinctrl core: initialized pinctrl subsystem
[    0.120532] RTC time: 20:16:04, date: 09/08/18
[    0.120752] NET: Registered protocol family 16
[    0.120927] audit: initializing netlink subsys (disabled)
[    0.121004] audit: type=2000 audit(1536437764.119:1): state=initialized audit_enabled=0 res=1
[    0.121004] cpuidle: using governor ladder
[    0.121004] cpuidle: using governor menu
[    0.121004] ACPI: bus type PCI registered
[    0.121004] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.121004] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.121004] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.121004] PCI: Using configuration type 1 for base access
[    0.124625] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.124625] ACPI: Added _OSI(Module Device)
[    0.124625] ACPI: Added _OSI(Processor Device)
[    0.124625] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.124625] ACPI: Added _OSI(Processor Aggregator Device)
[    0.124625] ACPI: Added _OSI(Linux-Dell-Video)
[    0.154244] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.158813] ACPI Error: No handler for Region [RAM_] ((____ptrval____)) [EmbeddedControl] (20180531/evregion-132)
[    0.158916] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20180531/exfldio-265)
[    0.159015] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._REG, AE_NOT_EXIST (20180531/psparse-516)
[    0.159268] ACPI Error: No handler for Region [RAM_] ((____ptrval____)) [EmbeddedControl] (20180531/evregion-132)
[    0.159364] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20180531/exfldio-265)
[    0.159460] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._REG, AE_NOT_EXIST (20180531/psparse-516)
[    0.165081] ACPI: Dynamic OEM Table Load:
[    0.165098] ACPI: SSDT 0xFFFF936CFE5BE800 00056E (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    0.166419] ACPI: Dynamic OEM Table Load:
[    0.166432] ACPI: SSDT 0xFFFF936CFE668000 0003A5 (v01 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.168118] ACPI: Dynamic OEM Table Load:
[    0.168131] ACPI: SSDT 0xFFFF936CFE657C00 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
[    0.168887] ACPI: Dynamic OEM Table Load:
[    0.168899] ACPI: SSDT 0xFFFF936CFE69B6C0 00008D (v01 PmRef  ApCst    00003000 INTL 20130117)
[    0.170950] ACPI: EC: EC started
[    0.170952] ACPI: EC: interrupt blocked
[    0.176873] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.176878] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.176882] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.176884] ACPI: Interpreter enabled
[    0.176943] ACPI: (supports S0 S3 S4 S5)
[    0.176945] ACPI: Using IOAPIC for interrupt routing
[    0.177037] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.178529] ACPI: Enabled 8 GPEs in block 00 to 3F
[    0.183278] ACPI: Power Resource [USBC] (on)
[    0.188587]  (null): Device [PWM1] is in always present list
[    0.194415] ACPI: Power Resource [CLK0] (on)
[    0.195097] ACPI: Power Resource [CLK0] (on)
[    0.195217] ACPI: Power Resource [CLK1] (on)
[    0.205690] ACPI: Power Resource [ID3C] (off)
[    0.211478]  (null): Device [GPED] is in always present list
[    0.215483] ACPI: Power Resource [FN00] (off)
[    0.217196] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.217210] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.217370] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.217406] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.218617] PCI host bridge to bus 0000:00
[    0.218623] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.218627] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.218630] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.218633] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.218636] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.218639] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.218642] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.218645] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.218648] pci_bus 0000:00: root bus resource [mem 0xfe800000-0xfe80ffff window]
[    0.218652] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.218667] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[    0.219048] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[    0.219076] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.219090] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.219101] pci 0000:00:02.0: reg 0x20: [io  0x2000-0x203f]
[    0.219426] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
[    0.219452] pci 0000:00:0b.0: reg 0x10: [mem 0x91418000-0x91418fff 64bit]
[    0.219794] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[    0.219828] pci 0000:00:14.0: reg 0x10: [mem 0x91400000-0x9140ffff 64bit]
[    0.219937] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.220267] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[    0.220296] pci 0000:00:1a.0: reg 0x10: [mem 0x91300000-0x913fffff]
[    0.220310] pci 0000:00:1a.0: reg 0x14: [mem 0x91200000-0x912fffff]
[    0.220410] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.220798] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[    0.220837] pci 0000:00:1b.0: reg 0x10: [mem 0x91410000-0x91413fff 64bit]
[    0.220948] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.221218] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[    0.221346] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.221628] pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400
[    0.221754] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.222049] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[    0.222434] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[    0.222505] pci 0000:00:1f.3: reg 0x10: [mem 0x91419000-0x9141901f]
[    0.222622] pci 0000:00:1f.3: reg 0x20: [io  0x2040-0x205f]
[    0.223175] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.223221] pci 0000:01:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.223261] pci 0000:01:00.0: reg 0x18: [mem 0x91104000-0x91104fff 64bit]
[    0.223287] pci 0000:01:00.0: reg 0x20: [mem 0x91100000-0x91103fff 64bit]
[    0.223429] pci 0000:01:00.0: supports D1 D2
[    0.223433] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.223653] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.223660] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.223666] pci 0000:00:1c.0:   bridge window [mem 0x91100000-0x911fffff]
[    0.223901] pci 0000:02:00.0: [8086:3165] type 00 class 0x028000
[    0.224133] pci 0000:02:00.0: reg 0x10: [mem 0x91000000-0x91001fff 64bit]
[    0.224910] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.225323] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.225333] pci 0000:00:1c.1:   bridge window [mem 0x91000000-0x910fffff]
[    1.258565] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    1.258821] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    1.259075] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.259327] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.259579] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.259831] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.260089] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.260340] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.263339] random: fast init done
[    1.264699] ACPI: EC: interrupt unblocked
[    1.264699] ACPI: EC: event unblocked
[    1.264714] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    1.264714] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    1.283440] dw_dmac INTL9C60:01: Missing DT data
[    1.304487] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[    1.305073] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    1.305078] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.305110] pci 0000:00:02.0: vgaarb: bridge control possible
[    1.305122] vgaarb: loaded
[    1.355460] random: crng init done
[    1.439445] pps_core: LinuxPPS API ver. 1 registered
[    1.439459] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.439497] PTP clock support registered
[    1.439569] EDAC MC: Ver: 3.0.0
[    1.446901] PCI: Using ACPI for IRQ routing
[    1.455734] PCI: pci_cache_line_size set to 64 bytes
[    1.455975] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    1.455989] e820: reserve RAM buffer [mem 0x712b2000-0x73ffffff]
[    1.456001] e820: reserve RAM buffer [mem 0x7657f000-0x77ffffff]
[    1.456885] NetLabel: Initializing
[    1.456898] NetLabel:  domain hash size = 128
[    1.456909] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.457021] NetLabel:  unlabeled traffic allowed by default
[    1.457062] clocksource: Switched to clocksource tsc-early
[    1.573135] VFS: Disk quotas dquot_6.6.0
[    1.573270] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.573972] pnp: PnP ACPI init
[    1.574772] system 00:00: [io  0x0400-0x047f] has been reserved
[    1.574797] system 00:00: [io  0x0500-0x05fe] has been reserved
[    1.574813] system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved
[    1.574866] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.577982] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.600468] system 00:02: [mem 0x91422000-0x91422fff] has been reserved
[    1.600493] system 00:02: [mem 0x91420000-0x91420fff] has been reserved
[    1.600508] system 00:02: [mem 0x9141e000-0x9141efff] has been reserved
[    1.600522] system 00:02: [mem 0x9141c000-0x9141cfff] has been reserved
[    1.600536] system 00:02: [mem 0x9141a000-0x9141afff] has been reserved
[    1.600579] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.601683] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[    1.601707] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
[    1.601722] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[    1.601736] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[    1.601750] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
[    1.601763] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
[    1.601777] system 00:03: [mem 0xfed80000-0xfedbffff] could not be reserved
[    1.601791] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    1.601805] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.601848] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.604189] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.607576] pnp: PnP ACPI: found 5 devices
[    1.627474] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.627626] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.627652] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    1.627680] pci 0000:00:1c.0:   bridge window [mem 0x91100000-0x911fffff]
[    1.627721] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    1.627748] pci 0000:00:1c.1:   bridge window [mem 0x91000000-0x910fffff]
[    1.627790] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    1.627803] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    1.627807] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    1.627819] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    1.627832] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    1.627845] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    1.627858] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    1.627862] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[    1.627874] pci_bus 0000:00: resource 12 [mem 0xfe800000-0xfe80ffff window]
[    1.627888] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.627901] pci_bus 0000:01: resource 1 [mem 0x91100000-0x911fffff]
[    1.627914] pci_bus 0000:02: resource 1 [mem 0x91000000-0x910fffff]
[    1.629287] NET: Registered protocol family 2
[    1.630489] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    1.630670] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.631221] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.631814] TCP: Hash tables configured (established 32768 bind 32768)
[    1.632191] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.632353] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.632908] NET: Registered protocol family 1
[    1.632961] NET: Registered protocol family 44
[    1.633046] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.636578] PCI: CLS 64 bytes, default 64
[    1.637100] Unpacking initramfs...
[    2.212757] Freeing initrd memory: 7404K
[    2.212765] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.212773] software IO TLB [mem 0x7257f000-0x7657f000] (64MB) mapped at [000000009492273a-0000000058e964cc]
[    2.212833] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[    2.212912] clocksource: Switched to clocksource tsc
[    2.213155] Scanning for low memory corruption every 60 seconds
[    2.214787] Initialise system trusted keyrings
[    2.214810] Key type blacklist registered
[    2.214994] workingset: timestamp_bits=41 max_order=20 bucket_order=0
[    2.218026] zbud: loaded
[    2.218573] pstore: using lz4hc compression
[    2.222818] Key type asymmetric registered
[    2.222822] Asymmetric key parser 'x509' registered
[    2.222923] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    2.223029] io scheduler noop registered
[    2.223032] io scheduler deadline registered
[    2.223143] io scheduler cfq registered (default)
[    2.223146] io scheduler mq-deadline registered
[    2.223148] io scheduler kyber registered
[    2.223215] io scheduler bfq registered
[    2.224383] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.224566] intel_idle: MWAIT substates: 0x33000020
[    2.224569] intel_idle: v0.4.1 model 0x4C
[    2.225173] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.225345] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    2.225381] ACPI: Lid Switch [LID0]
[    2.225472] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    2.225503] ACPI: Sleep Button [SLPB]
[    2.225588] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    2.225611] ACPI: Power Button [PWRF]
[    2.231547] thermal LNXTHERM:00: registered as thermal_zone0
[    2.231551] ACPI: Thermal Zone [TZ01] (41 C)
[    2.232089] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.253175] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.257598] rtc_cmos 00:04: RTC can wake from S4
[    2.258265] rtc_cmos 00:04: registered as rtc0
[    2.258320] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
[    2.258475] intel_pstate: Intel P-state driver initializing
[    4.117096] ledtrig-cpu: registered to indicate activity on CPUs
[    4.119596] NET: Registered protocol family 10
[    4.136341] Segment Routing with IPv6
[    4.136385] NET: Registered protocol family 17
[    4.136876] RAS: Correctable Errors collector initialized.
[    4.136952] microcode: sig=0x406c4, pf=0x1, revision=0x408
[    4.137087] microcode: Microcode Update Driver: v2.2.
[    4.137118] sched_clock: Marking stable (4137076695, 0)->(4122562675, 14514020)
[    4.137846] registered taskstats version 1
[    4.137863] Loading compiled-in X.509 certificates
[    4.137899] zswap: loaded using pool lzo/zbud
[    4.145627] Key type big_key registered
[    4.146464]   Magic number: 2:461:295
[    4.146503] tty tty28: hash matches
[    4.146735] rtc_cmos 00:04: setting system clock to 2018-09-08 20:16:08 UTC (1536437768)
[    4.164254] Freeing unused kernel image memory: 1488K
[    4.164307] Write protecting the kernel read-only data: 16384k
[    4.165508] Freeing unused kernel image memory: 2016K
[    4.165872] Freeing unused kernel image memory: 572K
[    4.381609] sdhci: Secure Digital Host Controller Interface driver
[    4.381611] sdhci: Copyright(c) Pierre Ossman
[    4.398105] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[    4.399681] i8042: PNP: PS/2 Controller [PNP0303:KBD0] at 0x60,0x64 irq 1
[    4.399684] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    4.401356] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.427565] ACPI: bus type USB registered
[    4.427616] usbcore: registered new interface driver usbfs
[    4.427633] usbcore: registered new interface driver hub
[    4.427681] usbcore: registered new device driver usb
[    4.438269] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.438481] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    4.439806] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081509810
[    4.439822] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    4.440654] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    4.440658] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.440660] usb usb1: Product: xHCI Host Controller
[    4.440662] usb usb1: Manufacturer: Linux 4.18.6-arch1-1-ARCH xhci-hcd
[    4.440664] usb usb1: SerialNumber: 0000:00:14.0
[    4.441108] hub 1-0:1.0: USB hub found
[    4.441143] hub 1-0:1.0: 7 ports detected
[    4.445869] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.445878] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    4.445884] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    4.446309] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[    4.446312] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.446314] usb usb2: Product: xHCI Host Controller
[    4.446316] usb usb2: Manufacturer: Linux 4.18.6-arch1-1-ARCH xhci-hcd
[    4.446318] usb usb2: SerialNumber: 0000:00:14.0
[    4.447116] hub 2-0:1.0: USB hub found
[    4.447150] hub 2-0:1.0: 6 ports detected
[    4.449023] usb: port power management may be unreliable
[    4.518041] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    4.530351] mmc0: new HS200 MMC card at address 0001
[    4.773858] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[    4.923744] usb 1-3: New USB device found, idVendor=04f2, idProduct=b520, bcdDevice= 0.05
[    4.923760] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.923770] usb 1-3: Product: HD WebCam
[    4.923779] usb 1-3: Manufacturer: SunplusIT Inc
[    5.050423] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[    5.192328] usb 1-4: New USB device found, idVendor=2386, idProduct=0401, bcdDevice= 0.00
[    5.192345] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.192355] usb 1-4: Product: Raydium Touch System
[    5.192364] usb 1-4: Manufacturer: Raydium Corporation
[    5.205413] hidraw: raw HID events driver (C) Jiri Kosina
[    5.212202] usbcore: registered new interface driver usbhid
[    5.212208] usbhid: USB HID core driver
[    5.216175] input: Raydium Corporation Raydium Touch System Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:2386:0401.0001/input/input5
[    5.216796] hid-generic 0003:2386:0401.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [Raydium Corporation Raydium Touch System] on usb-0000:00:14.0-4/input0
[    5.220956] input: Raydium Corporation Raydium Touch System as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:2386:0401.0001/input/input7
[    5.221598] hid-multitouch 0003:2386:0401.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [Raydium Corporation Raydium Touch System] on usb-0000:00:14.0-4/input0
[    5.317050] usb 1-5: new full-speed USB device number 4 using xhci_hcd
[    5.444336] mmc1: SDHCI controller on ACPI [80860F14:01] using ADMA
[    5.454732] mmcblk0: mmc0:0001 HCG8e 58.3 GiB 
[    5.455213] mmcblk0boot0: mmc0:0001 HCG8e partition 1 4.00 MiB
[    5.455696] mmcblk0boot1: mmc0:0001 HCG8e partition 2 4.00 MiB
[    5.455855] mmcblk0rpmb: mmc0:0001 HCG8e partition 3 4.00 MiB, chardev (242:0)
[    5.458221] usb 1-5: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[    5.458225] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.479192]  mmcblk0: p1 p2 < p5 > p3
[    5.757452] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    5.976983] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    5.994120] systemd[1]: Detected architecture x86-64.
[    6.003551] systemd[1]: Set hostname to <leilaptophaha>.
[    6.209229] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    6.210621] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.212173] systemd[1]: Listening on LVM2 metadata daemon socket.
[    6.213418] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    6.214661] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.216306] systemd[1]: Created slice system-getty.slice.
[    6.217502] systemd[1]: Reached target Remote File Systems.
[    6.432055] SCSI subsystem initialized
[    6.521250] EXT4-fs (mmcblk0p3): re-mounted. Opts: data=ordered
[    6.568540] systemd-journald[184]: Received request to flush runtime journal from PID 1
[    7.057949] Linux agpgart interface v0.103
[    7.063545] i2c_hid i2c-INT33D1:00: HID over i2c has not been provided an Int IRQ
[    7.065221] i2c_hid: probe of i2c-INT33D1:00 failed with error -22
[    7.072163] i2c_hid i2c-ELAN0501:00: i2c-ELAN0501:00 supply vdd not found, using dummy regulator
[    7.125543] input: ELAN0501:00 04F3:3010 Touchpad as /devices/pci0000:00/808622C1:05/i2c-1/i2c-ELAN0501:00/0018:04F3:3010.0002/input/input9
[    7.125759] hid-multitouch 0018:04F3:3010.0002: input,hidraw1: I2C HID v1.00 Mouse [ELAN0501:00 04F3:3010] on i2c-ELAN0501:00
[    7.134377] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    7.175976] input: Intel Virtual Button driver as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input10
[    7.178472] ACPI: Battery Slot [BAT0] (battery present)
[    7.178818] ACPI: AC Adapter [ADP1] (off-line)
[    7.251206] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    7.289376] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    7.289397] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[    7.308059] r8169 0000:01:00.0 eth0: RTL8168h/8111h, 30:65:ec:bb:e4:46, XID 54100800, IRQ 121
[    7.308065] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    7.404269] mousedev: PS/2 mouse device common for all mice
[    7.425475] media: Linux media interface: v0.10
[    7.610832] input: PC Speaker as /devices/platform/pcspkr/input/input11
[    7.673105] [drm] Replacing VGA console driver
[    7.678346] Console: switching to colour dummy device 80x25
[    7.683694] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    7.683698] [drm] Driver supports precise vblank timestamp query.
[    7.685485] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    7.715020] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[    7.717519] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    7.718164] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[    7.718419] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    7.746055] videodev: Linux video capture interface: v2.00
[    7.807885] fbcon: inteldrmfb (fb0) is primary device
[    7.831287] cryptd: max_cpu_qlen set to 1000
[    7.901514] Bluetooth: Core ver 2.22
[    7.901582] NET: Registered protocol family 31
[    7.901584] Bluetooth: HCI device and connection manager initialized
[    7.901598] Bluetooth: HCI socket layer initialized
[    7.901608] Bluetooth: L2CAP socket layer initialized
[    7.901627] Bluetooth: SCO socket layer initialized
[    7.904936] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    7.933045] SSE version of gcm_enc/dec engaged.
[    7.946859] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    7.949988] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    7.950067] cfg80211: failed to load regulatory.db
[    7.951200] iTCO_vendor_support: vendor-support=0
[    7.952637] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    7.952746] iTCO_wdt: Found a Braswell SoC TCO device (Version=3, TCOBASE=0x0460)
[    7.952914] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.988689] usbcore: registered new interface driver btusb
[    8.006808] intel-spi intel-spi: gd25lq64c (8192 Kbytes)
[    8.009223] Bluetooth: hci0: read Intel version: 370810011003110e32
[    8.009225] Bluetooth: hci0: Intel device is already patched. patch num: 32
[    8.012586] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b520)
[    8.033520] Creating 1 MTD partitions on "intel-spi":
[    8.033527] 0x000000000000-0x000000800000 : "BIOS"
[    8.039945] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized!
[    8.039954] uvcvideo 1-3:1.0: Entity type for entity Extension 3 was not initialized!
[    8.039957] uvcvideo 1-3:1.0: Entity type for entity Processing 2 was not initialized!
[    8.039959] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized!
[    8.040325] input: HD WebCam: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input13
[    8.041413] usbcore: registered new interface driver uvcvideo
[    8.041421] USB Video Class driver (1.1.1)
[    8.200446] acer_wmi: Acer Laptop ACPI-WMI Extras
[    8.200543] acer_wmi: Function bitmap for Communication Button: 0x801
[    8.202419] Intel(R) Wireless WiFi driver for Linux
[    8.202421] Copyright(c) 2003- 2015 Intel Corporation
[    8.230222] iwlwifi 0000:02:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
[    8.316520] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    8.356963] input: Acer WMI hotkeys as /devices/virtual/input/input14
[    8.452303] intel_rapl: Found RAPL domain package
[    8.452307] intel_rapl: Found RAPL domain core
[    8.505774] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
[    8.526034] iwlwifi 0000:02:00.0: base HW address: 70:1c:e7:08:b0:a6
[    8.609739] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    8.610916] thermal thermal_zone7: failed to read out thermal zone (-61)
[    8.622159] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    9.063833] Console: switching to colour frame buffer device 170x48
[    9.094548] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    9.173765] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    9.173770] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.173773] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    9.173774] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    9.173776] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    9.173779] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12
[    9.276519] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: stripe=32715,data=ordered
[    9.305991] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    9.307249] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    9.307364] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   10.208461] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   10.266270] r8169 0000:01:00.0 enp1s0: link down
[   10.267212] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   10.294765] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   10.403132] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   10.520429] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   10.651579] audit: type=1006 audit(1536437775.000:2): pid=384 uid=0 old-auid=4294967295 auid=120 tty=(none) old-ses=4294967295 ses=1 res=1
[   10.956626] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   14.432733] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   15.511786] wlp2s0: authenticate with e8:de:27:3e:28:5d
[   15.519446] wlp2s0: send auth to e8:de:27:3e:28:5d (try 1/3)
[   15.524155] wlp2s0: authenticated
[   15.526814] wlp2s0: associate with e8:de:27:3e:28:5d (try 1/3)
[   15.530793] wlp2s0: RX AssocResp from e8:de:27:3e:28:5d (capab=0x411 status=0 aid=1)
[   15.532384] wlp2s0: associated
[   16.009962] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   61.674112] audit: type=1006 audit(1536437826.023:3): pid=614 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   61.755404] audit: type=1006 audit(1536437826.103:4): pid=623 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[   63.222841] fuse init (API version 7.27)
[   68.350643] rfkill: input handler disabled

I do not own a dmesg output from when Arch was wokring on this machine; but I have the same model of computer with ubuntu 16.10 on it that works.

dmesg from working machine with outdated U16.10:

jph@R3-131T:~$ dmesg
[    0.000000] Linux version 4.8.0-59-generic (buildd@lcy01-03) (gcc version 6.2.0 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #64-Ubuntu SMP Thu Jun 29 19:38:34 UTC 2017 (Ubuntu 4.8.0-59.64-generic 4.8.17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-59-generic root=UUID=283fbfd8-01f7-41eb-8a60-c7c7db1ced80 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x00000000741fefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000741ff000-0x0000000074bfefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000074bff000-0x00000000766fefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000766ff000-0x000000007673efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007673f000-0x0000000077341fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000077342000-0x0000000077c41fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000077c42000-0x0000000077ffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bc00000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe800000-0x00000000fe80ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Acer Aspire R3-131T/Aspire R3-131T, BIOS V1.09 07/21/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 0FFA00000 mask FFFE00000 write-protect
[    0.000000]   2 base 000000000 mask F80000000 write-back
[    0.000000]   3 base 07C000000 mask FFC000000 uncachable
[    0.000000]   4 base 07BC00000 mask FFFC00000 uncachable
[    0.000000]   5 base 100000000 mask F00000000 write-back
[    0.000000]   6 base 200000000 mask F80000000 write-back
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff967880098000] 98000 size 24576
[    0.000000] BRK [0x11443c000, 0x11443cfff] PGTABLE
[    0.000000] BRK [0x11443d000, 0x11443dfff] PGTABLE
[    0.000000] BRK [0x11443e000, 0x11443efff] PGTABLE
[    0.000000] BRK [0x11443f000, 0x11443ffff] PGTABLE
[    0.000000] BRK [0x114440000, 0x114440fff] PGTABLE
[    0.000000] BRK [0x114441000, 0x114441fff] PGTABLE
[    0.000000] BRK [0x114442000, 0x114442fff] PGTABLE
[    0.000000] BRK [0x114443000, 0x114443fff] PGTABLE
[    0.000000] BRK [0x114444000, 0x114444fff] PGTABLE
[    0.000000] BRK [0x114445000, 0x114445fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33138000-0x35893fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x000000007673E120 0000A4 (v01 ACRSYS ACRPRDCT 00000003      01000013)
[    0.000000] ACPI: FACP 0x0000000076734000 00010C (v05 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: DSDT 0x0000000076722000 00C485 (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: FACS 0x0000000076680000 000040
[    0.000000] ACPI: UEFI 0x000000007673D000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MSDM 0x000000007673C000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: TCPA 0x000000007673B000 000032 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: UEFI 0x000000007673A000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: SSDT 0x0000000076735000 00421B (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: MCFG 0x0000000076732000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: SSDT 0x0000000076730000 0005AC (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: SSDT 0x000000007672F000 000D2E (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: SSDT 0x0000000076721000 000763 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x0000000076720000 000290 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 0x000000007671F000 00017A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: APIC 0x0000000076733000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000)
[    0.000000] ACPI: SSDT 0x000000007671E000 000432 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: TPM2 0x000000007671D000 000034 (v03 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: FPDT 0x0000000076731000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x27fff6000-0x27fffafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x00000000741fefff]
[    0.000000]   node   0: [mem 0x000000007673f000-0x0000000077341fff]
[    0.000000]   node   0: [mem 0x0000000077c42000-0x0000000077ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
[    0.000000] On node 0 totalpages: 2051933
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7423 pages used for memmap
[    0.000000]   DMA32 zone: 475072 pages, LIFO batch:31
[    0.000000]   Normal zone: 24576 pages used for memmap
[    0.000000]   Normal zone: 1572864 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000007c800000-0x000000007e7fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x741ff000-0x74bfefff]
[    0.000000] PM: Registered nosave memory: [mem 0x74bff000-0x766fefff]
[    0.000000] PM: Registered nosave memory: [mem 0x766ff000-0x7673efff]
[    0.000000] PM: Registered nosave memory: [mem 0x77342000-0x77c41fff]
[    0.000000] PM: Registered nosave memory: [mem 0x78000000-0x7bbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7bc00000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfe7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfe80ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe810000-0xfe9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed09fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfedbffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff967affc00000 s107864 r8192 d31400 u524288
[    0.000000] pcpu-alloc: s107864 r8192 d31400 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2019849
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-59-generic root=UUID=283fbfd8-01f7-41eb-8a60-c7c7db1ced80 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7952680K/8207732K available (8849K kernel code, 1441K rwdata, 3828K rodata, 1552K init, 1296K bss, 255052K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:1024 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Detected 1600.000 MHz processor
[    0.000037] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400000)
[    0.000043] pid_max: default: 32768 minimum: 301
[    0.000071] ACPI: Core revision 20160422
[    0.028549] ACPI: 8 ACPI AML tables successfully acquired and loaded

[    0.028625] Security Framework initialized
[    0.028629] Yama: becoming mindful.
[    0.028664] AppArmor: AppArmor initialized
[    0.029547] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.033721] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.035623] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.035643] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.036315] CPU: Physical Processor ID: 0
[    0.036317] CPU: Processor Core ID: 0
[    0.036324] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.036325] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.036335] mce: CPU supports 6 MCE banks
[    0.036354] process: using mwait in idle threads
[    0.036361] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.036363] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[    0.036821] Freeing SMP alternatives memory: 32K (ffffffffaf4ee000 - ffffffffaf4f6000)
[    0.040706] ftrace: allocating 33435 entries in 131 pages
[    0.067850] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.067853] smpboot: Max logical packages: 2
[    0.069806] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.109521] TSC deadline timer enabled
[    0.109526] smpboot: CPU0: Intel(R) Celeron(R) CPU  N3050  @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3)
[    0.109535] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.109565] ... version:                3
[    0.109567] ... bit width:              40
[    0.109568] ... generic registers:      2
[    0.109569] ... value mask:             000000ffffffffff
[    0.109570] ... max period:             0000007fffffffff
[    0.109571] ... fixed-purpose events:   3
[    0.109573] ... event mask:             0000000700000003
[    0.111469] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.111767] x86: Booting SMP configuration:
[    0.111770] .... node  #0, CPUs:      #1
[    0.114038] x86: Booted up 1 node, 2 CPUs
[    0.114042] smpboot: Total of 2 processors activated (6400.00 BogoMIPS)
[    0.116246] devtmpfs: initialized
[    0.116397] x86/mm: Memory block size: 128MB
[    0.125589] evm: security.selinux
[    0.125591] evm: security.SMACK64
[    0.125592] evm: security.SMACK64EXEC
[    0.125593] evm: security.SMACK64TRANSMUTE
[    0.125594] evm: security.SMACK64MMAP
[    0.125595] evm: security.ima
[    0.125596] evm: security.capability
[    0.125722] PM: Registering ACPI NVS region [mem 0x74bff000-0x766fefff] (28311552 bytes)
[    0.126897] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.126990] pinctrl core: initialized pinctrl subsystem
[    0.127243] RTC time: 20:18:45, date: 09/08/18
[    0.127493] NET: Registered protocol family 16
[    0.141995] cpuidle: using governor ladder
[    0.158020] cpuidle: using governor menu
[    0.158024] PCCT header not found.
[    0.158100] ACPI: bus type PCI registered
[    0.158103] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.158269] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.158273] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.158285] PCI: Using configuration type 1 for base access
[    0.174375] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.174965] ACPI: Added _OSI(Module Device)
[    0.174967] ACPI: Added _OSI(Processor Device)
[    0.174968] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.174970] ACPI: Added _OSI(Processor Aggregator Device)
[    0.182406] ACPI Error: No handler for Region [RAM_] (ffff967af74c3678) [EmbeddedControl] (20160422/evregion-166)
[    0.182415] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160422/exfldio-299)
[    0.182422] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff967af74c4b18), AE_NOT_EXIST (20160422/psparse-542)
[    0.182527] ACPI Error: No handler for Region [RAM_] (ffff967af74c3678) [EmbeddedControl] (20160422/evregion-166)
[    0.182533] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160422/exfldio-299)
[    0.182539] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff967af74c4b18), AE_NOT_EXIST (20160422/psparse-542)
[    0.186762] ACPI: Dynamic OEM Table Load:
[    0.186776] ACPI: SSDT 0xFFFF967AF6064000 0004EA (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    0.188140] ACPI: Dynamic OEM Table Load:
[    0.188152] ACPI: SSDT 0xFFFF967AF60A5000 0003A5 (v01 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.189931] ACPI: Dynamic OEM Table Load:
[    0.189941] ACPI: SSDT 0xFFFF967AF60F1600 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
[    0.191252] ACPI: Dynamic OEM Table Load:
[    0.191262] ACPI: SSDT 0xFFFF967AF60A06C0 00008D (v01 PmRef  ApCst    00003000 INTL 20130117)
[    0.193406] ACPI : EC: EC started
[    0.318367] ACPI: Interpreter enabled
[    0.318415] ACPI: (supports S0 S3 S4 S5)
[    0.318418] ACPI: Using IOAPIC for interrupt routing
[    0.318487] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.322187] ACPI: Power Resource [USBC] (on)
[    0.329720] ACPI: Power Resource [CLK0] (on)
[    0.330180] ACPI: Power Resource [CLK0] (on)
[    0.330288] ACPI: Power Resource [CLK1] (on)
[    0.336399] ACPI: Power Resource [ID3C] (off)
[    0.343532] ACPI: Power Resource [FN00] (off)
[    0.344646] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.344657] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.344750] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.344775] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.345467] PCI host bridge to bus 0000:00
[    0.345472] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.345475] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.345478] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.345481] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.345484] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.345486] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.345489] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.345492] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.345494] pci_bus 0000:00: root bus resource [mem 0xfe800000-0xfe80ffff window]
[    0.345498] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.345512] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[    0.345785] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[    0.345811] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.345825] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.345834] pci 0000:00:02.0: reg 0x20: [io  0x2000-0x203f]
[    0.346078] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
[    0.346100] pci 0000:00:0b.0: reg 0x10: [mem 0x91418000-0x91418fff 64bit]
[    0.346374] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[    0.346438] pci 0000:00:13.0: reg 0x20: [io  0x2060-0x207f]
[    0.346450] pci 0000:00:13.0: reg 0x24: [mem 0x9141f000-0x9141f7ff]
[    0.346517] pci 0000:00:13.0: PME# supported from D3hot
[    0.346709] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[    0.346737] pci 0000:00:14.0: reg 0x10: [mem 0x91400000-0x9140ffff 64bit]
[    0.346840] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.346980] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.347080] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[    0.347104] pci 0000:00:1a.0: reg 0x10: [mem 0x91300000-0x913fffff]
[    0.347116] pci 0000:00:1a.0: reg 0x14: [mem 0x91200000-0x912fffff]
[    0.347215] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.347483] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[    0.347515] pci 0000:00:1b.0: reg 0x10: [mem 0x91410000-0x91413fff 64bit]
[    0.347629] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.347748] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.347842] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[    0.347956] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.348070] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.348162] pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400
[    0.348274] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.348388] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.348489] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[    0.348798] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[    0.348852] pci 0000:00:1f.3: reg 0x10: [mem 0x91419000-0x9141901f]
[    0.348968] pci 0000:00:1f.3: reg 0x20: [io  0x2040-0x205f]
[    0.349418] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.349446] pci 0000:01:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.349484] pci 0000:01:00.0: reg 0x18: [mem 0x91104000-0x91104fff 64bit]
[    0.349508] pci 0000:01:00.0: reg 0x20: [mem 0x91100000-0x91103fff 64bit]
[    0.349650] pci 0000:01:00.0: supports D1 D2
[    0.349653] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.349734] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.358329] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.358336] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.358341] pci 0000:00:1c.0:   bridge window [mem 0x91100000-0x911fffff]
[    0.358573] pci 0000:02:00.0: [8086:3165] type 00 class 0x028000
[    0.358741] pci 0000:02:00.0: reg 0x10: [mem 0x91000000-0x91001fff 64bit]
[    0.359481] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.359660] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.370388] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.370398] pci 0000:00:1c.1:   bridge window [mem 0x91000000-0x910fffff]
[    1.386370] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    1.386515] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    1.386657] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.386799] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.386941] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.387081] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.387222] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.387381] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.394783] ACPI: Enabled 5 GPEs in block 00 to 3F
[    1.423423] ACPI : EC: EC stopped
[    1.423518] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    1.423519] ACPI : EC: EC started
[    1.576381] SCSI subsystem initialized
[    1.576495] libata version 3.00 loaded.
[    1.576588] vgaarb: setting as boot device: PCI:0000:00:02.0
[    1.576592] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.576600] vgaarb: loaded
[    1.576602] vgaarb: bridge control possible 0000:00:02.0
[    1.576660] ACPI: bus type USB registered
[    1.576701] usbcore: registered new interface driver usbfs
[    1.576722] usbcore: registered new interface driver hub
[    1.576746] usbcore: registered new device driver usb
[    1.577015] PCI: Using ACPI for IRQ routing
[    1.579699] PCI: pci_cache_line_size set to 64 bytes
[    1.579801] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    1.579805] e820: reserve RAM buffer [mem 0x741ff000-0x77ffffff]
[    1.579807] e820: reserve RAM buffer [mem 0x77342000-0x77ffffff]
[    1.580041] NetLabel: Initializing
[    1.580043] NetLabel:  domain hash size = 128
[    1.580044] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.580072] NetLabel:  unlabeled traffic allowed by default
[    1.580366] clocksource: Switched to clocksource refined-jiffies
[    1.599090] VFS: Disk quotas dquot_6.6.0
[    1.599142] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.599368] AppArmor: AppArmor Filesystem Enabled
[    1.599521] pnp: PnP ACPI init
[    1.599776] system 00:00: [io  0x0400-0x047f] has been reserved
[    1.599781] system 00:00: [io  0x0500-0x05fe] has been reserved
[    1.599791] system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved
[    1.599800] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.600324] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.603347] system 00:02: [mem 0x91422000-0x91422fff] has been reserved
[    1.603352] system 00:02: [mem 0x91420000-0x91420fff] has been reserved
[    1.603355] system 00:02: [mem 0x9141e000-0x9141efff] has been reserved
[    1.603359] system 00:02: [mem 0x9141c000-0x9141cfff] has been reserved
[    1.603363] system 00:02: [mem 0x9141a000-0x9141afff] has been reserved
[    1.603369] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.603575] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[    1.603580] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
[    1.603584] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[    1.603587] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[    1.603590] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
[    1.603594] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
[    1.603597] system 00:03: [mem 0xfed80000-0xfedbffff] could not be reserved
[    1.603601] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    1.603604] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.603611] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.603995] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.604478] pnp: PnP ACPI: found 5 devices
[    1.613756] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.613784] clocksource: Switched to clocksource acpi_pm
[    1.613833] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.613840] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    1.613848] pci 0000:00:1c.0:   bridge window [mem 0x91100000-0x911fffff]
[    1.613861] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    1.613868] pci 0000:00:1c.1:   bridge window [mem 0x91000000-0x910fffff]
[    1.613882] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    1.613886] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    1.613889] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    1.613892] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    1.613895] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    1.613898] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    1.613901] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    1.613904] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[    1.613907] pci_bus 0000:00: resource 12 [mem 0xfe800000-0xfe80ffff window]
[    1.613911] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.613913] pci_bus 0000:01: resource 1 [mem 0x91100000-0x911fffff]
[    1.613917] pci_bus 0000:02: resource 1 [mem 0x91000000-0x910fffff]
[    1.613999] NET: Registered protocol family 2
[    1.614375] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.614712] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.615118] TCP: Hash tables configured (established 65536 bind 65536)
[    1.615232] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.615325] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.615532] NET: Registered protocol family 1
[    1.615584] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.619586] PCI: CLS 64 bytes, default 64
[    1.619724] Unpacking initramfs...
[    2.938027] Freeing initrd memory: 40304K (ffff9678b3138000 - ffff9678b5894000)
[    2.938036] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.938040] software IO TLB [mem 0x701ff000-0x741ff000] (64MB) mapped at [ffff9678f01ff000-ffff9678f41fefff]
[    2.938335] Scanning for low memory corruption every 60 seconds
[    2.939296] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    2.939363] audit: initializing netlink subsys (disabled)
[    2.939406] audit: type=2000 audit(1536437927.927:1): initialized
[    2.940122] Initialise system trusted keyrings
[    2.940320] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    2.944575] zbud: loaded
[    2.945705] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.946328] fuse init (API version 7.25)
[    2.946681] Allocating IMA blacklist keyring.
[    2.949690] Key type asymmetric registered
[    2.949693] Asymmetric key parser 'x509' registered
[    2.949848] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    2.949941] io scheduler noop registered
[    2.949944] io scheduler deadline registered (default)
[    2.949963] io scheduler cfq registered
[    2.950762] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.950775] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.950864] efifb: probing for efifb
[    2.950871] efifb: framebuffer at 0xa0000, using 64k, total 64k
[    2.950874] efifb: mode is 640x480x1, linelength=80, pages=1
[    2.950875] efifb: scrolling: redraw
[    2.950877] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.951090] Console: switching to colour frame buffer device 80x30
[    2.951110] fb0: EFI VGA frame buffer device
[    2.951128] intel_idle: MWAIT substates: 0x33000020
[    2.951130] intel_idle: v0.4.1 model 0x4C
[    2.951328] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.951551] ACPI: AC Adapter [ADP1] (on-line)
[    2.951770] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    2.951837] ACPI: Lid Switch [LID0]
[    2.951935] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    2.951941] ACPI: Sleep Button [SLPB]
[    2.952038] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    2.952043] ACPI: Power Button [PWRF]
[    2.959607] thermal LNXTHERM:00: registered as thermal_zone0
[    2.959611] ACPI: Thermal Zone [TZ01] (33 C)
[    2.959681] GHES: HEST is not enabled!
[    2.959907] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.961362] ACPI: Battery Slot [BAT0] (battery present)
[    2.980508] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.984730] Linux agpgart interface v0.103
[    2.994226] loop: module loaded
[    2.994832] libphy: Fixed MDIO Bus: probed
[    2.994834] tun: Universal TUN/TAP device driver, 1.6
[    2.994835] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.994943] PPP generic driver version 2.4.2
[    2.995087] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.995094] ehci-pci: EHCI PCI platform driver
[    2.995137] ehci-platform: EHCI generic platform driver
[    2.995179] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.995184] ohci-pci: OHCI PCI platform driver
[    2.995215] ohci-platform: OHCI generic platform driver
[    2.995238] uhci_hcd: USB Universal Host Controller Interface driver
[    2.995639] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.995661] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    2.996852] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01509810
[    2.996869] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.997092] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.997098] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.997101] usb usb1: Product: xHCI Host Controller
[    2.997106] usb usb1: Manufacturer: Linux 4.8.0-59-generic xhci-hcd
[    2.997109] usb usb1: SerialNumber: 0000:00:14.0
[    2.997489] hub 1-0:1.0: USB hub found
[    2.997519] hub 1-0:1.0: 7 ports detected
[    3.000176] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.000185] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    3.000289] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    3.000293] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.000295] usb usb2: Product: xHCI Host Controller
[    3.000298] usb usb2: Manufacturer: Linux 4.8.0-59-generic xhci-hcd
[    3.000300] usb usb2: SerialNumber: 0000:00:14.0
[    3.000652] hub 2-0:1.0: USB hub found
[    3.000679] hub 2-0:1.0: 6 ports detected
[    3.001717] usb: port power management may be unreliable
[    3.003140] i8042: PNP: PS/2 Controller [PNP0303:KBD0] at 0x60,0x64 irq 1
[    3.003145] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    3.004549] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.004907] mousedev: PS/2 mouse device common for all mice
[    3.005408] rtc_cmos 00:04: RTC can wake from S4
[    3.005669] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    3.005719] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
[    3.005784] i2c /dev entries driver
[    3.005961] device-mapper: uevent: version 1.0.3
[    3.006156] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    3.006165] intel_pstate: Intel P-state driver initializing
[    3.006815] ledtrig-cpu: registered to indicate activity on CPUs
[    3.009244] NET: Registered protocol family 10
[    3.010096] NET: Registered protocol family 17
[    3.010119] Key type dns_resolver registered
[    3.010912] microcode: sig=0x406c3, pf=0x1, revision=0x34f
[    3.011157] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    3.011812] registered taskstats version 1
[    3.011820] Loading compiled-in X.509 certificates
[    3.019584] Loaded X.509 cert 'Build time autogenerated kernel key: 00952b1d5d2800285819e23d5e1dd3ebda0ac233'
[    3.019646] zswap: loaded using pool lzo/zbud
[    3.027002] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    3.051404] Key type big_key registered
[    3.059077] Key type trusted registered
[    3.065468] Key type encrypted registered
[    3.065481] AppArmor: AppArmor sha1 policy hashing enabled
[    3.065486] ima: No TPM chip found, activating TPM-bypass!
[    3.065536] evm: HMAC attrs: 0x1
[    3.066439]   Magic number: 2:14:346
[    3.066501] tty tty63: hash matches
[    3.066945] rtc_cmos 00:04: setting system clock to 2018-09-08 20:18:48 UTC (1536437928)
[    3.067341] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.067342] EDD information not available.
[    3.067530] PM: Hibernation image not present or could not be loaded.
[    3.070703] Freeing unused kernel memory: 1552K (ffffffffaf36a000 - ffffffffaf4ee000)
[    3.070707] Write protecting the kernel read-only data: 14336k
[    3.072327] Freeing unused kernel memory: 1376K (ffff967993aa8000 - ffff967993c00000)
[    3.073685] Freeing unused kernel memory: 268K (ffff967993fbd000 - ffff967994000000)
[    3.090992] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.126780] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.126973] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.126999] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.127030] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.127613] random: udevadm: uninitialized urandom read (16 bytes read)
[    3.127694] random: udevadm: uninitialized urandom read (16 bytes read)
[    3.132081] random: udevadm: uninitialized urandom read (16 bytes read)
[    3.132123] random: udevadm: uninitialized urandom read (16 bytes read)
[    3.132312] random: udevadm: uninitialized urandom read (16 bytes read)
[    3.132446] random: udevadm: uninitialized urandom read (16 bytes read)
[    3.216227] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    3.232343] sdhci: Secure Digital Host Controller Interface driver
[    3.232345] sdhci: Copyright(c) Pierre Ossman
[    3.250960] hidraw: raw HID events driver (C) Jiri Kosina
[    3.262992] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[    3.276531] wmi: Mapper loaded
[    3.313529] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.313546] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.320892] [drm] Initialized drm 1.1.0 20060810
[    3.325780] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[    3.329034] r8169 0000:01:00.0 eth0: RTL8168h/8111h at 0xffffc59180cbc000, 30:65:ec:92:7d:7c, XID 14100800 IRQ 310
[    3.329039] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.509426] usb 1-3: New USB device found, idVendor=0bda, idProduct=57cc
[    3.509430] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.509433] usb 1-3: Product: HD WebCam
[    3.509435] usb 1-3: Manufacturer: NC2141103L542007A0LM04
[    3.509436] usb 1-3: SerialNumber: 200901010001
[    3.537270] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    3.634568] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[    3.777330] usb 1-4: New USB device found, idVendor=2386, idProduct=0401
[    3.777335] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.777338] usb 1-4: Product: Raydium Touch System
[    3.777340] usb 1-4: Manufacturer: Raydium Corporation
[    3.898193] usb 1-5: new full-speed USB device number 4 using xhci_hcd
[    3.946110] tsc: Refined TSC clocksource calibration: 1599.947 MHz
[    3.946128] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x170ff2fc09b, max_idle_ns: 440795267654 ns
[    4.041666] usb 1-5: New USB device found, idVendor=8087, idProduct=0a2a
[    4.041674] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.056834] usbcore: registered new interface driver usbhid
[    4.056836] usbhid: USB HID core driver
[    4.304249] mmc1: SDHCI controller on ACPI [80860F14:01] using ADMA
[    4.304488] ahci 0000:00:13.0: version 3.0
[    4.304907] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    4.304913] ahci 0000:00:13.0: flags: 64bit ncq led clo only pio slum part deso sadm sds apst 
[    4.305609] scsi host0: ahci
[    4.305910] scsi host1: ahci
[    4.306020] ata1: SATA max UDMA/133 abar m2048@0x9141f000 port 0x9141f100 irq 311
[    4.306023] ata2: SATA max UDMA/133 abar m2048@0x9141f000 port 0x9141f180 irq 311
[    4.306736] [drm] Memory usable by graphics device = 2048M
[    4.306741] checking generic (a0000 10000) vs hw (80000000 10000000)
[    4.306743] fb: switching to inteldrmfb from EFI VGA
[    4.306792] Console: switching to colour dummy device 80x25
[    4.307053] [drm] Replacing VGA console driver
[    4.307228] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.307230] [drm] Driver supports precise vblank timestamp query.
[    4.321628] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.352546] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.353043] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    4.353203] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
[    4.435174] random: fast init done
[    4.581199] fbcon: inteldrmfb (fb0) is primary device
[    4.581397] Console: switching to colour frame buffer device 170x48
[    4.581434] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.623061] ata2: SATA link down (SStatus 0 SControl 300)
[    4.623129] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.623557] ata1.00: ATA-11: Corsair Force LE200 SSD, SBFM10.8, max UDMA/133
[    4.623563] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.624253] ata1.00: configured for UDMA/133
[    4.625456] scsi 0:0:0:0: Direct-Access     ATA      Corsair Force LE 10.8 PQ: 0 ANSI: 5
[    4.654532] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.654576] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    4.654790] sd 0:0:0:0: [sda] Write Protect is off
[    4.654801] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.654853] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.656288]  sda: sda1 sda2 < sda5 >
[    4.657354] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.970111] clocksource: Switched to clocksource tsc
[    6.428990] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    6.631848] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.672438] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    6.672727] systemd[1]: Detected architecture x86-64.
[    6.673182] systemd[1]: Set hostname to <R3-131T>.
[    6.839695] systemd[1]: Listening on RPCbind Server Activation Socket.
[    6.839908] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.839934] systemd[1]: Reached target Encrypted Volumes.
[    6.839987] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.840294] systemd[1]: Created slice User and Session Slice.
[    6.840319] systemd[1]: Reached target User and Group Name Lookups.
[    6.840418] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.917521] lp: driver loaded but no devices found
[    6.935651] ppdev: user-space parallel port driver
[    6.987512] RPC: Registered named UNIX socket transport module.
[    6.987516] RPC: Registered udp transport module.
[    6.987517] RPC: Registered tcp transport module.
[    6.987518] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    7.306335] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    7.470401] systemd-journald[226]: Received request to flush runtime journal from PID 1
[    7.522505] random: crng init done
[    7.980212] audit: type=1400 audit(1536437933.407:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=416 comm="apparmor_parser"
[    7.980228] audit: type=1400 audit(1536437933.407:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=416 comm="apparmor_parser"
[    7.980237] audit: type=1400 audit(1536437933.407:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=416 comm="apparmor_parser"
[    7.980246] audit: type=1400 audit(1536437933.407:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=416 comm="apparmor_parser"
[    7.995138] audit: type=1400 audit(1536437933.423:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/5145/usr/lib/snapd/snap-confine" pid=417 comm="apparmor_parser"
[    7.995156] audit: type=1400 audit(1536437933.423:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/5145/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=417 comm="apparmor_parser"
[    7.998072] audit: type=1400 audit(1536437933.427:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=415 comm="apparmor_parser"
[    7.998090] audit: type=1400 audit(1536437933.427:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=415 comm="apparmor_parser"
[    8.011557] audit: type=1400 audit(1536437933.439:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unity8-dash" pid=420 comm="apparmor_parser"
[    8.067148] Bluetooth: Core ver 2.21
[    8.067195] NET: Registered protocol family 31
[    8.067197] Bluetooth: HCI device and connection manager initialized
[    8.067204] Bluetooth: HCI socket layer initialized
[    8.067208] Bluetooth: L2CAP socket layer initialized
[    8.067221] Bluetooth: SCO socket layer initialized
[    8.093531] audit: type=1400 audit(1536437933.519:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=421 comm="apparmor_parser"
[    8.136167] Bluetooth: HCI UART driver ver 2.3
[    8.136170] Bluetooth: HCI UART protocol H4 registered
[    8.136172] Bluetooth: HCI UART protocol BCSP registered
[    8.136173] Bluetooth: HCI UART protocol LL registered
[    8.136174] Bluetooth: HCI UART protocol ATH3K registered
[    8.136175] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    8.136253] Bluetooth: HCI UART protocol Intel registered
[    8.136281] Bluetooth: HCI UART protocol BCM registered
[    8.136283] Bluetooth: HCI UART protocol QCA registered
[    8.136284] Bluetooth: HCI UART protocol AG6XX registered
[    8.302209] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[    8.310499] nfc: nfc_init: NFC Core ver 0.1
[    8.310537] NET: Registered protocol family 39
[    8.336459] input: Intel Virtual Button driver as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input5
[    8.526971] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.690903] usbcore: registered new interface driver btusb
[    8.695273] media: Linux media interface: v0.10
[    8.700045] input: Raydium Corporation Raydium Touch System as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:2386:0401.0001/input/input6
[    8.701639] hid-multitouch 0003:2386:0401.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [Raydium Corporation Raydium Touch System] on usb-0000:00:14.0-4/input0
[    8.708924] Bluetooth: hci0: read Intel version: 370810011003110e00
[    8.713842] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[    8.732919] hid-multitouch 0018:04F3:3010.0003: Ignoring the extra HID_DG_INPUTMODE
[    8.733756] input: ELAN0501:00 04F3:3010 Touchpad as /devices/pci0000:00/808622C1:05/i2c-10/i2c-ELAN0501:00/0018:04F3:3010.0003/input/input8
[    8.737320] hid-multitouch 0018:04F3:3010.0003: input,hidraw1: I2C HID v1.00 Mouse [ELAN0501:00 04F3:3010] on i2c-ELAN0501:00
[    8.771391] Linux video capture interface: v2.00
[    8.799214] Intel(R) Wireless WiFi driver for Linux
[    8.799217] Copyright(c) 2003- 2015 Intel Corporation
[    8.817516] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
[    8.817830] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
[    8.826937] iwlwifi 0000:02:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm
[    8.879079] SSE version of gcm_enc/dec engaged.
[    8.896381] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
[    8.898010] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[    8.898252] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[    8.917749] uvcvideo: Found UVC 1.00 device HD WebCam (0bda:57cc)
[    8.922932] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized!
[    8.922938] uvcvideo 1-3:1.0: Entity type for entity Processing 2 was not initialized!
[    8.922941] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized!
[    8.923105] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input9
[    8.923240] usbcore: registered new interface driver uvcvideo
[    8.923242] USB Video Class driver (1.1.1)
[    8.983426] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    9.091963] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[    9.153346] intel_rapl: Found RAPL domain package
[    9.153350] intel_rapl: Found RAPL domain core
[    9.475033] acer_wmi: Acer Laptop ACPI-WMI Extras
[    9.475055] acer_wmi: Function bitmap for Communication Button: 0x801
[    9.519421] acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0
[    9.519901] input: Acer WMI hotkeys as /devices/virtual/input/input10
[    9.521060] input: Acer BMA150 accelerometer as /devices/virtual/input/input11
[    9.745769] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    9.792075] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    9.792080] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.792082] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    9.792084] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    9.792086] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    9.792089] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12
[   10.065236] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[   10.425957] Adding 8205308k swap on /dev/sda5.  Priority:-1 extents:1 across:8205308k SSFS
[   10.589962] cgroup: new mount options do not match the existing superblock, will be ignored
[   10.867096] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   10.867366] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   10.918373] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.918376] Bluetooth: BNEP filters: protocol multicast
[   10.918384] Bluetooth: BNEP socket layer initialized
[   12.612362] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   12.647556] r8169 0000:01:00.0 enp1s0: link down
[   12.647673] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   12.696349] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   12.702300] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[   12.702525] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[   12.790986] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[   12.791251] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[   12.809217] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   12.985318] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   17.615423] Bluetooth: RFCOMM TTY layer initialized
[   17.615437] Bluetooth: RFCOMM socket layer initialized
[   17.615451] Bluetooth: RFCOMM ver 1.11
[  158.594804] wlp2s0: authenticate with e8:de:27:3e:28:5f
[  158.600243] wlp2s0: send auth to e8:de:27:3e:28:5f (try 1/3)
[  158.600827] wlp2s0: authenticated
[  158.608487] wlp2s0: associate with e8:de:27:3e:28:5f (try 1/3)
[  158.609437] wlp2s0: RX AssocResp from e8:de:27:3e:28:5f (capab=0x11 status=0 aid=2)
[  158.610867] wlp2s0: associated
[  158.610978] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  159.073590] IPv6: wlp2s0: IPv6 duplicate address fe80::6d00:823f:83fd:bda3 detected!
[  159.138843] audit_printk_skb: 75 callbacks suppressed
[  159.138847] audit: type=1400 audit(1536438084.571:37): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=922 comm="cups-browsed" capability=12  capname="net_admin"
[  159.546220] systemd[1]: snapd.refresh.timer: Adding 2h 20min 43.774943s random time.
[  159.546240] systemd[1]: snapd.refresh.timer: Adding 4h 42min 19.273260s random time.
[  159.657387] IPv6: wlp2s0: IPv6 duplicate address fe80::d3c3:94e3:5a1a:6ec3 detected!
[  159.967627] systemd[1]: snapd.refresh.timer: Adding 1h 5min 44.117768s random time.
[  159.967648] systemd[1]: snapd.refresh.timer: Adding 3h 6min 26.105322s random time.
[  160.424617] IPv6: wlp2s0: IPv6 duplicate address fe80::e90a:1534:5efa:d0d6 detected!
[  199.333923] audit: type=1400 audit(1536438124.446:38): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=922 comm="cups-browsed" capability=12  capname="net_admin"

Last edited by zenerve (2018-09-08 20:26:03)

Offline

#6 2018-09-08 20:48:21

loqs
Member
Registered: 2014-03-06
Posts: 17,326

Re: Touchpad not working - even with LTS 4.14 kernel ACER R131T

Depending on the journal size there might be still be boots from a working kernel version record Systemd#Filtering_output  then you could use something like

journalctl -b -50 -k

If you new 50 boots ago was under a working kernel.  If you do not know which was the last good kernel I would suggest trying linux-lts which you can install in parallel with the linux kernel and see if that has the issue.

Offline

#7 2018-09-08 20:58:32

zenerve
Member
Registered: 2013-04-27
Posts: 8

Re: Touchpad not working - even with LTS 4.14 kernel ACER R131T

Thanks. Since not upgrading for a full (school) year led to all sort of issues, I just wiped the thingy so past logs are beyond recovery.

I will try an -lts kernel and see if it makes a difference.

I set it to dual-boot with U 18.04 (that's a kernel 4.15 I think, it's a fallback not intended to be used much)  and the touchpad isn't working on it as well, with the same error messages.


Paint me puzzled.  I need to live-boot my own machine with a modern kernel to see if it is actually a regression.

Offline

#8 2018-10-26 09:21:36

mibo5354
Member
Registered: 2018-10-26
Posts: 1

Re: Touchpad not working - even with LTS 4.14 kernel ACER R131T

I have the same laptop and the touchpad works on 4.14 LTS

Offline

#9 2018-12-25 12:14:11

zenerve
Member
Registered: 2013-04-27
Posts: 8

Re: Touchpad not working - even with LTS 4.14 kernel ACER R131T

It worked, thank you mibo5354; flagging as "solved"

Offline

#10 2018-12-25 13:50:35

zenerve
Member
Registered: 2013-04-27
Posts: 8

Re: Touchpad not working - even with LTS 4.14 kernel ACER R131T

NOPE, trackpad stopped working after a few minutes. Any other cues ?

running kernel 4.14.90-1-lts

Last edited by zenerve (2018-12-25 13:50:51)

Offline

Board footer

Powered by FluxBB