You are not logged in.

#1 2006-08-12 19:24:53

h8
Member
Registered: 2006-08-12
Posts: 3

cd-rom drive I/O fatal errors

Hi to All.

After some mounts (1-2) of cd I have this messages form dmesg:

hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 1150560
Buffer I/O error on device hdc, logical block 287640
ide-cd: cmd 0x3 timed out
hdc: lost interrupt
ide-cd: cmd 0x3 timed out
hdc: lost interrupt
...

After that I can't mount or umount cd, can't read data. But tray is unlocked. I've turned off hal and dbus, but this errors is still here.

Kernel: 2.6.17-beyond
Motherboard: Asus P5RD2-VM with ATI chipset
SATA hard disk and ATA DVD-RW NEC3570A

Offline

#2 2006-08-14 15:29:58

h8
Member
Registered: 2006-08-12
Posts: 3

Re: cd-rom drive I/O fatal errors

So, the solution was to add piix, ide-generic, sd_mod and ext3 to the MODULES in mkinitcpio.conf and rebuild image with mkinitcpio -g /boot/kernel26.img command.

Offline

Board footer

Powered by FluxBB