You are not logged in.
Pages: 1
hi, i installed arch on a system with 2 disk, one SSD and one HDD, what io/scheduler do i use? cfq for HDD and noop for SSD? noop for both? the wiki is not clear
[root@Dell-g5-5587 i]# cat /sys/block/nvme0n1/queue/scheduler
[none] mq-deadline kyber bfq
[root@Dell-g5-5587 i]# cat /sys/block/sda/queue/scheduler
noop deadline [cfq]
are there other solutions to optimize the system besides moving tmp files in the ram?
fstab:
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/nvme0n1p0 EFI
#UUID=58be-7418 /boot vfat defaults 0 2
# /dev/nvme0n1p4 SWAP
UUID=3ab2f54f-7c2a-4b6c-a9ae-460462072fbd swap swap defaults 0 0
# compile in RAM
shm /dev/shm tmpfs nodev,nosuid,noatime 0 0
# /tmp in RAM
tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0
# /var/tmp in RAM
tmpfs /var/tmp tmpfs defaults,noatime,mode=1777 0 0
# /dev/nvme0n1p6 LABEL=ARCH_ROOT
UUID=44f44174-0528-4fe0-97e0-dca22d0ba340 / ext4 defaults,noatime,discard,commit=100,data=ordered 0 1
# /dev/nvme0n1p7 LABEL=ARCH_HOME
UUID=3fbfa3a8-d9da-4528-ae68-6ba0e4e7e73b /home ext4 defaults,noatime,discard,commit=100,data=ordered 0 2
# /dev/sda1
UUID=4705d098-bf4f-495a-b26d-60c03cd3c784 /mnt/Data ext4 defaults,relatime 0 2
Offline
Not an Installation issue, moving to NC...
Offline
Pages: 1