You are not logged in.

#1 2018-11-23 09:17:37

NLisa
Member
Registered: 2016-08-23
Posts: 10

[SOLVED] LXDM boots to blank screen after NVIDIA 410.78 update

TL;DR:

If display manager / desktop environment is broken after update, try to completely purge nvidia

pacman -Rncs nvidia nvidia-utils nvidia-settings

Then reinstall everything that was removed.

Hi,

After a "recent" system update including NVIDIA drivers to 410.73 415.18, I get a blank screen instead of my login / display manager.

This may be related to this Reddit Post on SDDM booting to blank after nvidia update and solved forum post Broken nvidia-dkms 410.78 with 4.19.2-zen kernel.

I'm concerned that there may not be a driver to support my hybrid laptop NVIDIA GPU. So from the NVIDIA Legacy Driver Support List, my specific card is NOT on that list, but other cards e.g.: GT 730 are, thus making my 740M Keplar chipset one of the lowest entry cards to "STILL" be on the regular (non-legacy) driver.

I've tried the 415 driver from testing, I see that as of today it's in extra, I've also tried the 390xx legacy drivers.

My current stack:

linux 4.19.2.arch1-1
libxrandr 1.5.1-2
lxdm-gtk3 0.5.3-6
xorg-server 1.20.3-1
xorg-xinit 1.4.0-3
xorg-xrandr 1.5.0-2
nvidia 410.78-1 and 415.18-1
nvidia-settings 410.78-1 and 415.18-1
nvidia-utils 410.78-1 and 415.18-1

As stated before I've tried to rebuild this stack with the 390xx legacy drivers to no avail. I'm worried I may have to rollback the driver and indefinitely freeze NVIDIA updates...

% lspci -k | grep -i 3d
01:00.0 3D controller: NVIDIA corporation GK208M [GeForce GT 740M] (rev a1)
/var/log/Xorg.0.log

[    35.439] 
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[    35.440] Build Operating System: Linux Arch Linux
[    35.440] Current Operating System: Linux Illuvatar 4.19.2-arch1-1-ARCH #1 SMP PREEMPT Tue Nov 13 21:16:19 UTC 2018 x86_64
[    35.440] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=026013a5-1b12-44c5-a2ad-2135d83f20c9 rw rootflags=subvol=__active/arch-root
[    35.440] Build Date: 25 October 2018  04:42:32PM
[    35.440]  
[    35.440] Current version of pixman: 0.34.0
[    35.440] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    35.440] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    35.440] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 23 09:51:44 2018
[    35.478] (==) Using config file: "/etc/X11/xorg.conf"
[    35.478] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    35.478] (==) No Layout section.  Using the first Screen section.
[    35.478] (==) No screen section available. Using defaults.
[    35.478] (**) |-->Screen "Default Screen Section" (0)
[    35.478] (**) |   |-->Monitor "<default monitor>"
[    35.479] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    35.479] (**) |   |-->Device "nvidia"
[    35.479] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    35.479] (==) Automatically adding devices
[    35.479] (==) Automatically enabling devices
[    35.479] (==) Automatically adding GPU devices
[    35.479] (==) Automatically binding GPU devices
[    35.479] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    36.165] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    36.165] (==) ModulePath set to "/usr/lib/xorg/modules"
[    36.165] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    36.165] (II) Module ABI versions:
[    36.165] 	X.Org ANSI C Emulation: 0.4
[    36.165] 	X.Org Video Driver: 24.0
[    36.165] 	X.Org XInput driver : 24.1
[    36.166] 	X.Org Server Extension : 10.0
[    36.167] (++) using VT number 1

[    36.167] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    36.168] (II) xfree86: Adding drm device (/dev/dri/card1)
[    36.169] (II) xfree86: Adding drm device (/dev/dri/card0)
[    36.179] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[    36.179] (**) OutputClass "nvidia" setting /dev/dri/card1 as PrimaryGPU
[    36.180] (--) PCI: (0@0:2:0) 8086:0416:103c:1963 rev 6, Mem @ 0xd3000000/4194304, 0xc0000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
[    36.180] (--) PCI:*(1@0:0:0) 10de:1292:103c:219a rev 161, Mem @ 0xd2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[    36.181] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    36.181] (II) "glx" will be loaded by default.
[    36.181] (II) LoadModule: "modesetting"
[    36.442] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    36.893] (II) Module modesetting: vendor="X.Org Foundation"
[    36.893] 	compiled for 1.20.3, module version = 1.20.3
[    36.893] 	Module class: X.Org Video Driver
[    36.893] 	ABI class: X.Org Video Driver, version 24.0
[    36.893] (II) LoadModule: "glx"
[    36.894] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    37.466] (II) Module glx: vendor="X.Org Foundation"
[    37.466] 	compiled for 1.20.3, module version = 1.0.0
[    37.466] 	ABI class: X.Org Server Extension, version 10.0
[    37.467] (II) LoadModule: "nvidia"
[    37.467] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    38.326] (II) Module nvidia: vendor="NVIDIA Corporation"
[    38.326] 	compiled for 4.0.2, module version = 1.0.0
[    38.326] 	Module class: X.Org Video Driver
[    38.326] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    38.326] (II) NVIDIA dlloader X Driver  410.78  Sat Nov 10 22:15:52 CST 2018
[    38.326] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    38.326] (WW) Falling back to old probe method for modesetting
[    38.326] (II) Loading sub module "fb"
[    38.326] (II) LoadModule: "fb"
[    38.327] (II) Loading /usr/lib/xorg/modules/libfb.so
[    38.394] (II) Module fb: vendor="X.Org Foundation"
[    38.394] 	compiled for 1.20.3, module version = 1.0.0
[    38.394] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    38.394] (II) Loading sub module "wfb"
[    38.394] (II) LoadModule: "wfb"
[    38.395] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    38.436] (II) Module wfb: vendor="X.Org Foundation"
[    38.436] 	compiled for 1.20.3, module version = 1.0.0
[    38.436] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    38.436] (II) Loading sub module "ramdac"
[    38.436] (II) LoadModule: "ramdac"
[    38.436] (II) Module "ramdac" already built-in
[    38.440] (II) modeset(G0): using drv /dev/dri/card0
[    38.440] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    38.440] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    38.441] (==) NVIDIA(0): RGB weight 888
[    38.441] (==) NVIDIA(0): Default visual is TrueColor
[    38.441] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    38.441] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[    38.441] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[    38.441] (**) NVIDIA(0): Enabling 2D acceleration
[    38.441] (II) Loading sub module "glxserver_nvidia"
[    38.441] (II) LoadModule: "glxserver_nvidia"
[    38.441] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[    42.169] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[    42.169] 	compiled for 4.0.2, module version = 1.0.0
[    42.169] 	Module class: X.Org Server Extension
[    42.169] (II) NVIDIA GLX Module  410.78  Sat Nov 10 22:12:55 CST 2018
[    42.921] (II) NVIDIA(0): NVIDIA GPU GeForce GT 740M (GK208) at PCI:1:0:0 (GPU-0)
[    42.921] (--) NVIDIA(0): Memory: 2097152 kBytes
[    42.921] (--) NVIDIA(0): VideoBIOS: 80.28.3e.00.1d
[    42.921] (II) NVIDIA(0): Detected PCI Express Link width: 8X
[    42.921] (II) NVIDIA(0): Validated MetaModes:
[    42.921] (II) NVIDIA(0):     "NULL"
[    42.921] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[    42.921] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[    42.921] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    42.921] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[    42.921] (==) modeset(G0): RGB weight 888
[    42.921] (==) modeset(G0): Default visual is TrueColor
[    42.921] (II) Loading sub module "glamoregl"
[    42.921] (II) LoadModule: "glamoregl"
[    42.921] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    43.114] (II) Module glamoregl: vendor="X.Org Foundation"
[    43.114] 	compiled for 1.20.3, module version = 1.0.1
[    43.114] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    45.098] (II) modeset(G0): glamor X acceleration enabled on Mesa DRI Intel(R) Haswell Mobile 
[    45.098] (II) modeset(G0): glamor initialized
[    45.102] (II) modeset(G0): Output eDP-1-1 has no monitor section
[    45.104] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[    45.108] (II) modeset(G0): EDID for output eDP-1-1
[    45.108] (II) modeset(G0): Manufacturer: AUO  Model: 32ed  Serial#: 0
[    45.108] (II) modeset(G0): Year: 2012  Week: 0
[    45.108] (II) modeset(G0): EDID Version: 1.4
[    45.108] (II) modeset(G0): Digital Display Input
[    45.108] (II) modeset(G0): 6 bits per channel
[    45.108] (II) modeset(G0): Digital interface is undefined
[    45.108] (II) modeset(G0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    45.108] (II) modeset(G0): Gamma: 2.20
[    45.108] (II) modeset(G0): No DPMS capabilities specified
[    45.108] (II) modeset(G0): Supported color encodings: RGB 4:4:4 
[    45.108] (II) modeset(G0): First detailed timing is preferred mode
[    45.108] (II) modeset(G0): Preferred mode is native pixel format and refresh rate
[    45.108] (II) modeset(G0): redX: 0.620 redY: 0.349   greenX: 0.324 greenY: 0.606
[    45.108] (II) modeset(G0): blueX: 0.152 blueY: 0.118   whiteX: 0.313 whiteY: 0.329
[    45.108] (II) modeset(G0): Manufacturer's mask: 0
[    45.108] (II) modeset(G0): Supported detailed timing:
[    45.108] (II) modeset(G0): clock: 140.0 MHz   Image Size:  344 x 193 mm
[    45.108] (II) modeset(G0): h_active: 1920  h_sync: 1968  h_sync_end 2068 h_blank_end 2100 h_border: 0
[    45.108] (II) modeset(G0): v_active: 1080  v_sync: 1083  v_sync_end 1084 v_blanking: 1110 v_border: 0
[    45.108] (II) modeset(G0): Supported detailed timing:
[    45.108] (II) modeset(G0): clock: 93.3 MHz   Image Size:  344 x 193 mm
[    45.108] (II) modeset(G0): h_active: 1920  h_sync: 1968  h_sync_end 2068 h_blank_end 2100 h_border: 0
[    45.108] (II) modeset(G0): v_active: 1080  v_sync: 1083  v_sync_end 1084 v_blanking: 1110 v_border: 0
[    45.108] (II) modeset(G0): Unknown vendor-specific block 2
[    45.108] (II) modeset(G0): EDID (in hex):
[    45.108] (II) modeset(G0): 	00ffffffffffff0006afed3200000000
[    45.108] (II) modeset(G0): 	001601049022137802d1159e59539b27
[    45.108] (II) modeset(G0): 	1e505400000001010101010101010101
[    45.108] (II) modeset(G0): 	010101010101b03680b470381e403064
[    45.108] (II) modeset(G0): 	310058c110000018752480b470381e40
[    45.108] (II) modeset(G0): 	3064310058c110000018000000000000
[    45.108] (II) modeset(G0): 	00000000000000000000000000000002
[    45.108] (II) modeset(G0): 	000c3dff0c3c7d1b0d1c7d20202000e5
[    45.109] (II) modeset(G0): Printing probed modes for output eDP-1-1
[    45.109] (II) modeset(G0): Modeline "1920x1080"x60.1  140.00  1920 1968 2068 2100  1080 1083 1084 1110 -hsync -vsync (66.7 kHz eP)
[    45.109] (II) modeset(G0): Modeline "1920x1080"x120.0  356.38  1920 2080 2288 2656  1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[    45.109] (II) modeset(G0): Modeline "1920x1080"x119.9  266.50  1920 1944 1960 2000  1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[    45.109] (II) modeset(G0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[    45.109] (II) modeset(G0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    45.109] (II) modeset(G0): Modeline "1920x1080"x40.0   93.33  1920 1968 2068 2100  1080 1083 1084 1110 -hsync -vsync (44.4 kHz e)
[    45.109] (II) modeset(G0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    45.109] (II) modeset(G0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[    45.109] (II) modeset(G0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    45.109] (II) modeset(G0): Modeline "1600x900"x120.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[    45.109] (II) modeset(G0): Modeline "1600x900"x119.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[    45.109] (II) modeset(G0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[    45.109] (II) modeset(G0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[    45.109] (II) modeset(G0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    45.109] (II) modeset(G0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[    45.109] (II) modeset(G0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[    45.109] (II) modeset(G0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    45.109] (II) modeset(G0): Modeline "1440x810"x120.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[    45.109] (II) modeset(G0): Modeline "1440x810"x119.9  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[    45.109] (II) modeset(G0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[    45.109] (II) modeset(G0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[    45.109] (II) modeset(G0): Modeline "1280x800"x120.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[    45.109] (II) modeset(G0): Modeline "1280x800"x119.9  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[    45.109] (II) modeset(G0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[    45.109] (II) modeset(G0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[    45.109] (II) modeset(G0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    45.109] (II) modeset(G0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    45.109] (II) modeset(G0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    45.109] (II) modeset(G0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    45.109] (II) modeset(G0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    45.109] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    45.109] (II) modeset(G0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    45.109] (II) modeset(G0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    45.109] (II) modeset(G0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    45.109] (II) modeset(G0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    45.109] (II) modeset(G0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    45.109] (II) modeset(G0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    45.109] (II) modeset(G0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    45.109] (II) modeset(G0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    45.109] (II) modeset(G0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    45.109] (II) modeset(G0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    45.109] (II) modeset(G0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    45.109] (II) modeset(G0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    45.109] (II) modeset(G0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    45.109] (II) modeset(G0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    45.109] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    45.109] (II) modeset(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    45.109] (II) modeset(G0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    45.109] (II) modeset(G0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    45.109] (II) modeset(G0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    45.109] (II) modeset(G0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    45.109] (II) modeset(G0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    45.109] (II) modeset(G0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    45.109] (II) modeset(G0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    45.109] (II) modeset(G0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    45.109] (II) modeset(G0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    45.109] (II) modeset(G0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    45.109] (II) modeset(G0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    45.109] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    45.109] (II) modeset(G0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    45.109] (II) modeset(G0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    45.109] (II) modeset(G0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    45.109] (II) modeset(G0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    45.109] (II) modeset(G0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    45.109] (II) modeset(G0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    45.109] (II) modeset(G0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    45.109] (II) modeset(G0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    45.109] (II) modeset(G0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    45.109] (II) modeset(G0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    45.109] (II) modeset(G0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    45.109] (II) modeset(G0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    45.109] (II) modeset(G0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    45.109] (II) modeset(G0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    45.109] (II) modeset(G0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    45.109] (II) modeset(G0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    45.109] (II) modeset(G0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    45.109] (II) modeset(G0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    45.109] (II) modeset(G0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    45.109] (II) modeset(G0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    45.109] (II) modeset(G0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    45.109] (II) modeset(G0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    45.109] (II) modeset(G0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    45.109] (II) modeset(G0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    45.111] (II) modeset(G0): EDID for output HDMI-1-1
[    45.111] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[    45.111] (==) modeset(G0): DPI set to (96, 96)
[    45.111] (II) Loading sub module "fb"
[    45.111] (II) LoadModule: "fb"
[    45.111] (II) Loading /usr/lib/xorg/modules/libfb.so
[    45.111] (II) Module fb: vendor="X.Org Foundation"
[    45.111] 	compiled for 1.20.3, module version = 1.0.0
[    45.111] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    45.202] (==) modeset(G0): Backing store enabled
[    45.202] (==) modeset(G0): Silken mouse disabled
[    45.250] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[    45.250] (==) modeset(G0): DPMS enabled
[    45.251] (II) modeset(G0): [DRI2] Setup complete
[    45.251] (II) modeset(G0): [DRI2]   DRI driver: i965
[    45.251] (II) modeset(G0): [DRI2]   VDPAU driver: i965
[    45.251] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[    45.251] (II) NVIDIA:     access.
[    45.257] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    45.257] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    45.257] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    45.257] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    45.257] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    45.257] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    45.257] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    45.257] (II) NVIDIA(0):     Config Options in the README.
[    45.277] (II) NVIDIA(0): Setting mode "NULL"
[    45.282] (==) NVIDIA(0): Disabling shared memory pixmaps
[    45.282] (==) NVIDIA(0): Backing store enabled
[    45.282] (==) NVIDIA(0): Silken mouse disabled
[    45.282] (==) NVIDIA(0): DPMS enabled
[    45.282] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[    45.282] (II) Loading sub module "dri2"
[    45.282] (II) LoadModule: "dri2"
[    45.282] (II) Module "dri2" already built-in
[    45.282] (II) NVIDIA(0): [DRI2] Setup complete
[    45.282] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    45.282] (II) Initializing extension Generic Event Extension
[    45.282] (II) Initializing extension SHAPE
[    45.282] (II) Initializing extension MIT-SHM
[    45.282] (II) Initializing extension XInputExtension
[    45.282] (II) Initializing extension XTEST
[    45.283] (II) Initializing extension BIG-REQUESTS
[    45.283] (II) Initializing extension SYNC
[    45.283] (II) Initializing extension XKEYBOARD
[    45.283] (II) Initializing extension XC-MISC
[    45.283] (II) Initializing extension SECURITY
[    45.283] (II) Initializing extension XFIXES
[    45.283] (II) Initializing extension RENDER
[    45.283] (II) Initializing extension RANDR
[    45.284] (II) Initializing extension COMPOSITE
[    45.284] (II) Initializing extension DAMAGE
[    45.284] (II) Initializing extension MIT-SCREEN-SAVER
[    45.284] (II) Initializing extension DOUBLE-BUFFER
[    45.284] (II) Initializing extension RECORD
[    45.284] (II) Initializing extension DPMS
[    45.284] (II) Initializing extension Present
[    45.284] (II) Initializing extension DRI3
[    45.285] (II) Initializing extension X-Resource
[    45.285] (II) Initializing extension XVideo
[    45.285] (II) Initializing extension XVideo-MotionCompensation
[    45.285] (II) Initializing extension GLX
[    45.285] (II) Initializing extension GLX
[    45.285] (II) Indirect GLX disabled.
[    45.285] (II) GLX: Another vendor is already registered for screen 0
[    45.285] (II) Initializing extension XFree86-VidModeExtension
[    45.285] (II) Initializing extension XFree86-DGA
[    45.285] (II) Initializing extension XFree86-DRI
[    45.285] (II) Initializing extension DRI2
[    45.285] (II) Initializing extension NV-GLX
[    45.285] (II) Initializing extension NV-CONTROL
[    45.556] (II) modeset(G0): Damage tracking initialized
[    46.691] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    46.691] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    46.691] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    46.691] (II) LoadModule: "libinput"
[    46.691] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    46.804] (II) Module libinput: vendor="X.Org Foundation"
[    46.804] 	compiled for 1.20.1, module version = 0.28.1
[    46.804] 	Module class: X.Org XInput Driver
[    46.804] 	ABI class: X.Org XInput driver, version 24.1
[    46.805] (II) Using input driver 'libinput' for 'Power Button'
[    46.805] (**) Power Button: always reports core events
[    46.805] (**) Option "Device" "/dev/input/event2"
[    46.805] (**) Option "_source" "server/udev"
[    46.832] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    46.832] (II) event2  - Power Button: device is a keyboard
[    46.832] (II) event2  - Power Button: device removed
[    46.855] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    46.855] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    46.855] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    46.855] (II) event2  - Power Button: device is a keyboard
[    46.856] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[    46.856] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    46.856] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    46.856] (II) Using input driver 'libinput' for 'Video Bus'
[    46.856] (**) Video Bus: always reports core events
[    46.856] (**) Option "Device" "/dev/input/event13"
[    46.856] (**) Option "_source" "server/udev"
[    46.856] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[    46.856] (II) event13 - Video Bus: device is a keyboard
[    46.856] (II) event13 - Video Bus: device removed
[    46.932] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14/event13"
[    46.932] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    46.933] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[    46.933] (II) event13 - Video Bus: device is a keyboard
[    46.933] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[    46.933] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    46.933] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    46.933] (II) Using input driver 'libinput' for 'Video Bus'
[    46.933] (**) Video Bus: always reports core events
[    46.933] (**) Option "Device" "/dev/input/event12"
[    46.933] (**) Option "_source" "server/udev"
[    46.934] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[    46.934] (II) event12 - Video Bus: device is a keyboard
[    46.934] (II) event12 - Video Bus: device removed
[    46.995] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4b/LNXVIDEO:00/input/input13/event12"
[    46.996] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    46.996] (II) event12 - Video Bus: is tagged by udev as: Keyboard
[    46.996] (II) event12 - Video Bus: device is a keyboard
[    46.997] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    46.997] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    46.997] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    46.997] (II) Using input driver 'libinput' for 'Power Button'
[    46.997] (**) Power Button: always reports core events
[    46.997] (**) Option "Device" "/dev/input/event1"
[    46.997] (**) Option "_source" "server/udev"
[    46.997] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    46.997] (II) event1  - Power Button: device is a keyboard
[    46.997] (II) event1  - Power Button: device removed
[    47.022] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    47.022] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    47.023] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    47.023] (II) event1  - Power Button: device is a keyboard
[    47.023] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    47.023] (II) No input driver specified, ignoring this device.
[    47.023] (II) This device may have been added with another device file.
[    47.024] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event14)
[    47.024] (II) No input driver specified, ignoring this device.
[    47.024] (II) This device may have been added with another device file.
[    47.024] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event15)
[    47.024] (II) No input driver specified, ignoring this device.
[    47.024] (II) This device may have been added with another device file.
[    47.024] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event16)
[    47.024] (II) No input driver specified, ignoring this device.
[    47.024] (II) This device may have been added with another device file.
[    47.025] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event17)
[    47.025] (II) No input driver specified, ignoring this device.
[    47.025] (II) This device may have been added with another device file.
[    47.025] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=10 (/dev/input/event18)
[    47.025] (II) No input driver specified, ignoring this device.
[    47.025] (II) This device may have been added with another device file.
[    47.025] (II) config/udev: Adding input device HP Truevision HD: HP Truevision (/dev/input/event19)
[    47.025] (**) HP Truevision HD: HP Truevision: Applying InputClass "evdev keyboard catchall"
[    47.025] (**) HP Truevision HD: HP Truevision: Applying InputClass "libinput keyboard catchall"
[    47.025] (II) Using input driver 'libinput' for 'HP Truevision HD: HP Truevision'
[    47.025] (**) HP Truevision HD: HP Truevision: always reports core events
[    47.025] (**) Option "Device" "/dev/input/event19"
[    47.025] (**) Option "_source" "server/udev"
[    47.026] (II) event19 - HP Truevision HD: HP Truevision: is tagged by udev as: Keyboard
[    47.026] (II) event19 - HP Truevision HD: HP Truevision: device is a keyboard
[    47.026] (II) event19 - HP Truevision HD: HP Truevision: device removed
[    47.076] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input20/event19"
[    47.076] (II) XINPUT: Adding extended input device "HP Truevision HD: HP Truevision" (type: KEYBOARD, id 10)
[    47.077] (II) event19 - HP Truevision HD: HP Truevision: is tagged by udev as: Keyboard
[    47.077] (II) event19 - HP Truevision HD: HP Truevision: device is a keyboard
[    47.077] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[    47.077] (II) No input driver specified, ignoring this device.
[    47.077] (II) This device may have been added with another device file.
[    47.077] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[    47.077] (II) No input driver specified, ignoring this device.
[    47.077] (II) This device may have been added with another device file.
[    47.078] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[    47.078] (II) No input driver specified, ignoring this device.
[    47.078] (II) This device may have been added with another device file.
[    47.078] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    47.078] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    47.078] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    47.078] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    47.078] (**) AT Translated Set 2 keyboard: always reports core events
[    47.078] (**) Option "Device" "/dev/input/event3"
[    47.078] (**) Option "_source" "server/udev"
[    47.078] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    47.078] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    47.079] (II) event3  - AT Translated Set 2 keyboard: device removed
[    47.099] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    47.099] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    47.100] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    47.100] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    47.100] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[    47.100] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    47.100] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    47.100] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    47.100] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    47.100] (II) LoadModule: "synaptics"
[    47.101] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    47.108] (II) Module synaptics: vendor="X.Org Foundation"
[    47.108] 	compiled for 1.20.0, module version = 1.9.1
[    47.108] 	Module class: X.Org XInput Driver
[    47.108] 	ABI class: X.Org XInput driver, version 24.1
[    47.108] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    47.108] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    47.109] (**) Option "Device" "/dev/input/event7"
[    47.159] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[    47.159] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1282 - 5660 (res 41)
[    47.159] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1152 - 4702 (res 56)
[    47.159] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    47.159] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    47.159] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[    47.159] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    47.159] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    47.159] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    47.159] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    47.222] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event7"
[    47.222] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[    47.222] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    47.222] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    47.222] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[    47.222] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    47.223] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    47.223] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    47.223] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    47.223] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    47.223] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    47.223] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    47.223] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
[    47.223] (II) No input driver specified, ignoring this device.
[    47.223] (II) This device may have been added with another device file.
[    47.224] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    47.224] (II) No input driver specified, ignoring this device.
[    47.224] (II) This device may have been added with another device file.
[    47.224] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    47.224] (II) No input driver specified, ignoring this device.
[    47.224] (II) This device may have been added with another device file.
[    47.224] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event4)
[    47.224] (**) HP Wireless hotkeys: Applying InputClass "evdev keyboard catchall"
[    47.224] (**) HP Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[    47.224] (II) Using input driver 'libinput' for 'HP Wireless hotkeys'
[    47.224] (**) HP Wireless hotkeys: always reports core events
[    47.224] (**) Option "Device" "/dev/input/event4"
[    47.224] (**) Option "_source" "server/udev"
[    47.225] (II) event4  - HP Wireless hotkeys: is tagged by udev as: Keyboard
[    47.225] (II) event4  - HP Wireless hotkeys: device is a keyboard
[    47.225] (II) event4  - HP Wireless hotkeys: device removed
[    47.276] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event4"
[    47.276] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 13)
[    47.277] (II) event4  - HP Wireless hotkeys: is tagged by udev as: Keyboard
[    47.277] (II) event4  - HP Wireless hotkeys: device is a keyboard
[    47.277] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event11)
[    47.277] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    47.277] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    47.277] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[    47.277] (**) HP WMI hotkeys: always reports core events
[    47.277] (**) Option "Device" "/dev/input/event11"
[    47.277] (**) Option "_source" "server/udev"
[    47.278] (II) event11 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[    47.278] (II) event11 - HP WMI hotkeys: device is a keyboard
[    47.278] (II) event11 - HP WMI hotkeys: device removed
[    47.342] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event11"
[    47.342] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[    47.343] (II) event11 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[    47.343] (II) event11 - HP WMI hotkeys: device is a keyboard
[   150.050] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[   150.050] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   502.998] (II) event2  - Power Button: device removed
[   503.022] (II) event13 - Video Bus: device removed
[   503.089] (II) event12 - Video Bus: device removed
[   503.142] (II) event1  - Power Button: device removed
[   503.169] (II) event19 - HP Truevision HD: HP Truevision: device removed
[   503.249] (II) event3  - AT Translated Set 2 keyboard: device removed
[   503.337] (II) event4  - HP Wireless hotkeys: device removed
[   503.409] (II) event11 - HP WMI hotkeys: device removed
/var/log/lxdm.log

** Message: 09:51:42.098: find greeter (nil)

** Message: 09:51:42.099: find idle (nil)

** Message: 09:51:42.126: 1542959502: add xserver watch


X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
Build Operating System: Linux Arch Linux
Current Operating System: Linux Illuvatar 4.19.2-arch1-1-ARCH #1 SMP PREEMPT Tue Nov 13 21:16:19 UTC 2018 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=026013a5-1b12-44c5-a2ad-2135d83f20c9 rw rootflags=subvol=__active/arch-root
Build Date: 25 October 2018  04:42:32PM
 
Current version of pixman: 0.34.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 23 09:51:44 2018
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Unsupported high keycode 372 for name <I372> ignored
>                   X11 cannot support keycodes above 255.
>                   This warning only shows for the first high keycode.
Errors from xkbcomp are not fatal to the X server
** Message: 09:51:56.713: 1542959516: start xserver in 52 retry
** Message: 09:51:56.713: add 0x55ecc7960cf0

** Message: 09:51:56.713: prepare greeter on /var/run/lxdm/lxdm-:0.auth

** Message: 09:51:56.728: start greeter on /var/run/lxdm/lxdm-:0.auth


(process:714): Gtk-WARNING **: 09:51:59.111: Locale not supported by C library.
	Using the fallback 'C' locale.

(lxdm-greeter-gtk:714): Gtk-WARNING **: 09:51:59.388: Theme parsing error: gtk.css:11:7: not a number

(lxdm-greeter-gtk:714): Gtk-WARNING **: 09:51:59.388: Theme parsing error: gtk.css:11:14: Using Pango syntax for the font: style property is deprecated; please use CSS syntax

(lxdm-greeter-gtk:714): Gtk-WARNING **: 09:51:59.388: Theme parsing error: gtk.css:16:7: not a number

(lxdm-greeter-gtk:714): Gtk-WARNING **: 09:51:59.388: Theme parsing error: gtk.css:16:14: Using Pango syntax for the font: style property is deprecated; please use CSS syntax

(lxdm-greeter-gtk:714): Gtk-WARNING **: 09:51:59.388: Theme parsing error: gtk.css:22:7: not a number

(lxdm-greeter-gtk:714): Gtk-WARNING **: 09:51:59.388: Theme parsing error: gtk.css:22:14: Using Pango syntax for the font: style property is deprecated; please use CSS syntax
** Message: 09:52:33.775: greeter 989 session 0x55ecc7960cf0

** Message: 09:52:33.775: user 989 session 0x55ecc7960cf0 cmd USER_LIST
/etc/X11/xorg.conf

Section "Module"
    Load "modesetting"
EndSection

Section "Device"
    Identifier     "nvidia"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BusID          "1:0:0"
    Option         "AllowEmptyInitialConfiguration"
EndSection

Sorry, I was responsible for the whole debacle and subsequent breakage regarding the PrimaryGPU directive here Bug Report 60102.

/usr/share/X11/xorg.conf.d/10-nvidia-drm-outputclass.conf

Section "OutputClass"
    Identifier "intel"
    MatchDriver "i915"
    Driver "modesetting"
EndSection

Section "OutputClass"
    Identifier "nvidia"
    MatchDriver "nvidia-drm"
    Driver "nvidia"
    Option "AllowEmptyInitialConfiguration"
    Option "PrimaryGPU" "yes"
    ModulePath "/usr/lib/nvidia/xorg"
    ModulePath "/usr/lib/xorg/modules"
EndSection
~/.xinitrc

xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --auto

Thank you for your consideration,
NLisa

Last edited by NLisa (2018-11-23 13:11:35)

Offline

#2 2018-11-23 10:02:19

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 5,718

Re: [SOLVED] LXDM boots to blank screen after NVIDIA 410.78 update

If you try without LXDM and just startx does that work? FWIW there's no evidence to anything being incorrect in the xorg.log you might want to post a dmesg to see whether there's an issue with the kernel/kernel driver. Also your .xinitrc is incomplete, it should at least include the necessary system wide includes, note the second blue box if you intend to test this with startx.

Also please clarify recent update, apart from the nvidia driver what else was in there? post a pacman.log containing at least the full update from when the error first occured.

Last edited by V1del (2018-11-23 10:05:43)

Offline

#3 2018-11-23 11:00:47

NLisa
Member
Registered: 2016-08-23
Posts: 10

Re: [SOLVED] LXDM boots to blank screen after NVIDIA 410.78 update

Yes, I've tried with other display managers, disabling lxdm, enabling sddm, or gdm or lightdm through systemctl and restarting to no avail.

Standalone startx gives me non-fatal xkeyboard keyboard compiler errors for unsupported high keycode numbers that are ignore, and a blank screen with all my installed desktop environments: lxde, cinnamon-session, xfce etc... There is no crash, just a blank screen. Even twm with an xclock is not working, just a blank screen as well.

Had an idea of trying twm with the 390xx driver, but still no luck.

dmesg

[    0.000000] microcode: microcode updated early to revision 0x25, date = 2018-04-02
[    0.000000] Linux version 4.19.2-arch1-1-ARCH (builduser@heftig-16038) (gcc version 8.2.1 20180831 (GCC)) #1 SMP PREEMPT Tue Nov 13 21:16:19 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=026013a5-1b12-44c5-a2ad-2135d83f20c9 rw rootflags=subvol=__active/arch-root
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009c67efff] usable
[    0.000000] BIOS-e820: [mem 0x000000009c67f000-0x000000009c87efff] type 20
[    0.000000] BIOS-e820: [mem 0x000000009c87f000-0x000000009ce7efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by INSYDE Corp.
[    0.000000] efi:  ACPI=0x9cffe000  ACPI 2.0=0x9cffe014  SMBIOS=0x9ce7ef98 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP ENVY 15 Notebook PC/1963, BIOS F.68 07/22/2016
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2394.599 MHz processor
[    0.000310] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000312] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000319] last_pfn = 0x25f600 max_arch_pfn = 0x400000000
[    0.000323] MTRR default type: uncachable
[    0.000324] MTRR fixed ranges enabled:
[    0.000325]   00000-9FFFF write-back
[    0.000326]   A0000-BFFFF uncachable
[    0.000326]   C0000-E7FFF write-protect
[    0.000327]   E8000-EFFFF write-combining
[    0.000328]   F0000-FFFFF write-protect
[    0.000329] MTRR variable ranges enabled:
[    0.000330]   0 base 0000000000 mask 7C00000000 write-back
[    0.000331]   1 base 009D000000 mask 7FFF000000 uncachable
[    0.000332]   2 base 009E000000 mask 7FFE000000 uncachable
[    0.000333]   3 base 00A0000000 mask 7FE0000000 uncachable
[    0.000333]   4 base 00C0000000 mask 7FC0000000 uncachable
[    0.000334]   5 disabled
[    0.000334]   6 disabled
[    0.000335]   7 disabled
[    0.000335]   8 disabled
[    0.000336]   9 disabled
[    0.001221] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001407] total RAM covered: 14800M
[    0.001788] Found optimal setting for mtrr clean up
[    0.001789]  gran_size: 64K 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 0G
[    0.002634] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[    0.002639] last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.023872] Scanning 1 areas for low memory corruption
[    0.023876] Base memory trampoline at [(____ptrval____)] 7e000 size 24576
[    0.023878] Using GB pages for direct mapping
[    0.023880] BRK [0x18ee01000, 0x18ee01fff] PGTABLE
[    0.023882] BRK [0x18ee02000, 0x18ee02fff] PGTABLE
[    0.023883] BRK [0x18ee03000, 0x18ee03fff] PGTABLE
[    0.023908] BRK [0x18ee04000, 0x18ee04fff] PGTABLE
[    0.023910] BRK [0x18ee05000, 0x18ee05fff] PGTABLE
[    0.024012] BRK [0x18ee06000, 0x18ee06fff] PGTABLE
[    0.024040] BRK [0x18ee07000, 0x18ee07fff] PGTABLE
[    0.024085] BRK [0x18ee08000, 0x18ee08fff] PGTABLE
[    0.024116] Secure boot could not be determined
[    0.024117] RAMDISK: [mem 0x36a41000-0x37517fff]
[    0.024123] ACPI: Early table checksum verification disabled
[    0.024126] ACPI: RSDP 0x000000009CFFE014 000024 (v02 HPQOEM)
[    0.024130] ACPI: XSDT 0x000000009CFFE210 0000BC (v01 HPQOEM SLIC-MPC 00000001 HP   01000013)
[    0.024135] ACPI: FACP 0x000000009CFF8000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.024141] ACPI: DSDT 0x000000009CFE1000 01316A (v01 HPQOEM 1963     00000000 ACPI 00040000)
[    0.024144] ACPI: FACS 0x000000009CF7A000 000040
[    0.024147] ACPI: UEFI 0x000000009CFFD000 000236 (v01 HPQOEM 1963     00000001 HP   00040000)
[    0.024150] ACPI: FPDT 0x000000009CFFB000 000044 (v01 HPQOEM 1963     00000001 HP   00040000)
[    0.024152] ACPI: MSDM 0x000000009CFFA000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.024155] ACPI: ASF! 0x000000009CFF9000 0000A5 (v32 HPQOEM 1963     00000001 HP   00040000)
[    0.024158] ACPI: HPET 0x000000009CFF7000 000038 (v01 HPQOEM 1963     00000001 HP   00040000)
[    0.024161] ACPI: APIC 0x000000009CFF6000 00008C (v03 HPQOEM 1963     00000001 HP   00040000)
[    0.024164] ACPI: MCFG 0x000000009CFF5000 00003C (v01 HPQOEM 1963     00000001 HP   00040000)
[    0.024167] ACPI: SSDT 0x000000009CFDE000 002026 (v01 HPQOEM 1963     00001000 INTL 00040000)
[    0.024170] ACPI: BOOT 0x000000009CFDC000 000028 (v01 HPQOEM 1963     00000001 HP   00040000)
[    0.024173] ACPI: LPIT 0x000000009CFDB000 000094 (v01 HPQOEM 1963     00000001 HP   00040000)
[    0.024176] ACPI: ASPT 0x000000009CFD9000 000034 (v07 HPQOEM 1963     00000001 HP   00040000)
[    0.024179] ACPI: DBGP 0x000000009CFD8000 000034 (v01 HPQOEM 1963     00000001 HP   00040000)
[    0.024182] ACPI: SSDT 0x000000009CFD0000 000539 (v01 HPQOEM 1963     00003000 INTL 00040000)
[    0.024184] ACPI: SSDT 0x000000009CFCF000 000AD8 (v01 HPQOEM 1963     00003000 INTL 00040000)
[    0.024187] ACPI: SSDT 0x000000009CFCB000 003385 (v01 HPQOEM 1963     00003000 INTL 00040000)
[    0.024190] ACPI: SSDT 0x000000009CFC5000 003B0F (v01 HPQOEM 1963     00001000 INTL 00040000)
[    0.024193] ACPI: SSDT 0x000000009CFCA000 000379 (v01 HPQOEM 1963     00001000 INTL 00040000)
[    0.024196] ACPI: BGRT 0x000000009CFC9000 000038 (v01 HPQOEM 1963     00000001 HP   00040000)
[    0.024205] ACPI: Local APIC address 0xfee00000
[    0.024285] No NUMA configuration found
[    0.024286] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
[    0.024289] NODE_DATA(0) allocated [mem 0x25f5fc000-0x25f5fffff]
[    0.024310] Zone ranges:
[    0.024311]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.024312]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.024313]   Normal   [mem 0x0000000100000000-0x000000025f5fffff]
[    0.024314]   Device   empty
[    0.024315] Movable zone start for each node
[    0.024316] Early memory node ranges
[    0.024317]   node   0: [mem 0x0000000000001000-0x000000000006efff]
[    0.024318]   node   0: [mem 0x0000000000070000-0x0000000000087fff]
[    0.024318]   node   0: [mem 0x0000000000100000-0x000000009c67efff]
[    0.024319]   node   0: [mem 0x000000009cfff000-0x000000009cffffff]
[    0.024319]   node   0: [mem 0x0000000100000000-0x000000025f5fffff]
[    0.024538] Reserved but unavailable: 14842 pages
[    0.024539] Initmem setup node 0 [mem 0x0000000000001000-0x000000025f5fffff]
[    0.024541] On node 0 totalpages: 2079750
[    0.024542]   DMA zone: 64 pages used for memmap
[    0.024542]   DMA zone: 22 pages reserved
[    0.024543]   DMA zone: 3974 pages, LIFO batch:0
[    0.024630]   DMA32 zone: 9946 pages used for memmap
[    0.024630]   DMA32 zone: 636544 pages, LIFO batch:63
[    0.039230]   Normal zone: 22488 pages used for memmap
[    0.039231]   Normal zone: 1439232 pages, LIFO batch:63
[    0.069306] Reserving Intel graphics memory at [mem 0x9da00000-0x9f9fffff]
[    0.069392] ACPI: PM-Timer IO Port: 0x1808
[    0.069394] ACPI: Local APIC address 0xfee00000
[    0.069409] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.069411] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.069413] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.069414] ACPI: IRQ0 used by override.
[    0.069416] ACPI: IRQ9 used by override.
[    0.069417] Using ACPI (MADT) for SMP configuration information
[    0.069419] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.069431] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.069448] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.069450] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[    0.069452] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[    0.069452] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.069454] PM: Registered nosave memory: [mem 0x9c67f000-0x9c87efff]
[    0.069454] PM: Registered nosave memory: [mem 0x9c87f000-0x9ce7efff]
[    0.069455] PM: Registered nosave memory: [mem 0x9ce7f000-0x9cf7efff]
[    0.069456] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
[    0.069457] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[    0.069458] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[    0.069458] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.069459] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.069459] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[    0.069460] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[    0.069460] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.069461] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.069461] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[    0.069462] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[    0.069463] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[    0.069465] [mem 0x9fa00000-0xdfffffff] available for PCI devices
[    0.069465] Booting paravirtualized kernel on bare hardware
[    0.069468] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.186267] random: get_random_bytes called from start_kernel+0x95/0x53f with crng_init=0
[    0.186273] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.186502] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144
[    0.186508] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.186509] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.186529] Built 1 zonelists, mobility grouping on.  Total pages: 2047230
[    0.186530] Policy zone: Normal
[    0.186532] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=026013a5-1b12-44c5-a2ad-2135d83f20c9 rw rootflags=subvol=__active/arch-root
[    0.190222] Calgary: detecting Calgary via BIOS EBDA area
[    0.190223] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.213585] Memory: 8003032K/8319000K available (12300K kernel code, 1374K rwdata, 3640K rodata, 1532K init, 3860K bss, 315968K reserved, 0K cma-reserved)
[    0.213695] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.213700] Kernel/User page tables isolation: enabled
[    0.221939] ftrace: allocating 35542 entries in 139 pages
[    0.236820] rcu: Preemptible hierarchical RCU implementation.
[    0.236821] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.236821] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.236822] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.236823] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.236824] 	Tasks RCU enabled.
[    0.236825] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.238385] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.238546] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.238605] Console: colour dummy device 80x25
[    0.238609] console [tty0] enabled
[    0.238625] ACPI: Core revision 20180810
[    0.238883] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.238893] hpet clockevent registered
[    0.238897] APIC: Switch to symmetric I/O mode setup
[    0.239286] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.255564] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2284492bab5, max_idle_ns: 440795219958 ns
[    0.255575] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.74 BogoMIPS (lpj=7981996)
[    0.255578] pid_max: default: 32768 minimum: 301
[    0.259997] Security Framework initialized
[    0.259998] Yama: becoming mindful.
[    0.260003] AppArmor: AppArmor disabled by boot time parameter
[    0.261169] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.261794] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.261824] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.261844] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.262362] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.262363] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.262368] mce: CPU supports 9 MCE banks
[    0.262376] CPU0: Thermal monitoring enabled (TM1)
[    0.262390] process: using mwait in idle threads
[    0.262393] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.262393] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.262395] Spectre V2 : Mitigation: Full generic retpoline
[    0.262395] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.262396] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.262396] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.262397] Spectre V2 : Spectre v2 cross-process SMT mitigation: Enabling STIBP
[    0.262399] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.266414] Freeing SMP alternatives memory: 28K
[    0.272360] TSC deadline timer enabled
[    0.272363] smpboot: CPU0: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.292253] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.292298] ... version:                3
[    0.292299] ... bit width:              48
[    0.292299] ... generic registers:      4
[    0.292300] ... value mask:             0000ffffffffffff
[    0.292301] ... max period:             00007fffffffffff
[    0.292302] ... fixed-purpose events:   3
[    0.292302] ... event mask:             000000070000000f
[    0.298914] rcu: Hierarchical SRCU implementation.
[    0.322432] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.328920] smp: Bringing up secondary CPUs ...
[    0.368928] x86: Booting SMP configuration:
[    0.368929] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.609282] smp: Brought up 1 node, 8 CPUs
[    0.609282] smpboot: Max logical packages: 1
[    0.609282] smpboot: Total of 8 processors activated (38328.98 BogoMIPS)
[    0.612509] devtmpfs: initialized
[    0.612509] x86/mm: Memory block size: 128MB
[    0.612896] PM: Registering ACPI NVS region [mem 0x9ce7f000-0x9cf7efff] (1048576 bytes)
[    0.612896] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.612896] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.612896] pinctrl core: initialized pinctrl subsystem
[    0.612896] RTC time:  9:17:38, date: 11/23/18
[    0.612896] NET: Registered protocol family 16
[    0.612896] audit: initializing netlink subsys (disabled)
[    0.612896] audit: type=2000 audit(1542964657.373:1): state=initialized audit_enabled=0 res=1
[    0.618906] cpuidle: using governor ladder
[    0.618913] cpuidle: using governor menu
[    0.618928] Simple Boot Flag at 0x44 set to 0x1
[    0.618945] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.618946] ACPI: bus type PCI registered
[    0.618947] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.619015] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.619024] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.619024] PCI: Using configuration type 1 for base access
[    0.619024] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.619977] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.619977] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.619977] ACPI: Added _OSI(Module Device)
[    0.619977] ACPI: Added _OSI(Processor Device)
[    0.619977] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.619977] ACPI: Added _OSI(Processor Aggregator Device)
[    0.619977] ACPI: Added _OSI(Linux-Dell-Video)
[    0.619977] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.635819] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.644034] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.757306] ACPI: Dynamic OEM Table Load:
[    0.757313] ACPI: SSDT 0xFFFF9F6555548C00 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.757959] ACPI: Dynamic OEM Table Load:
[    0.757966] ACPI: SSDT 0xFFFF9F655585E800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120913)
[    0.758655] ACPI: Dynamic OEM Table Load:
[    0.758660] ACPI: SSDT 0xFFFF9F6555556000 000119 (v01 PmRef  ApCst    00003000 INTL 20120913)
[    0.760998] ACPI: EC: EC started
[    0.760999] ACPI: EC: interrupt blocked
[    0.791611] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
[    0.791614] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.791615] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions
[    0.791616] ACPI: Interpreter enabled
[    0.791653] ACPI: (supports S0 S3 S4 S5)
[    0.791654] ACPI: Using IOAPIC for interrupt routing
[    0.791686] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.792038] ACPI: Enabled 10 GPEs in block 00 to 3F
[    0.831472] ACPI: Power Resource [NVP3] (on)
[    0.831525] ACPI: Power Resource [NVP2] (on)
[    0.839374] ACPI: Power Resource [FN00] (on)
[    0.840366] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.840371] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.840546] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.841233] PCI host bridge to bus 0000:00
[    0.841235] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.841237] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.841238] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.841239] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.841241] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.841242] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.841243] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.841244] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.841246] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.841247] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.841248] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.841250] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.841251] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.841252] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.841253] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.841255] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.841256] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[    0.841258] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.841265] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.841499] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.841539] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.841809] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    0.841820] pci 0000:00:02.0: reg 0x10: [mem 0xd3000000-0xd33fffff 64bit]
[    0.841826] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.841830] pci 0000:00:02.0: reg 0x20: [io  0x6000-0x603f]
[    0.841843] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.842080] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.842090] pci 0000:00:03.0: reg 0x10: [mem 0xd3710000-0xd3713fff 64bit]
[    0.842346] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.842367] pci 0000:00:14.0: reg 0x10: [mem 0xd3700000-0xd370ffff 64bit]
[    0.842426] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.842641] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.842663] pci 0000:00:16.0: reg 0x10: [mem 0xd3718000-0xd371800f 64bit]
[    0.842725] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.842945] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.842966] pci 0000:00:1b.0: reg 0x10: [mem 0xd3714000-0xd3717fff 64bit]
[    0.843034] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.843250] pci 0000:00:1c.0: [8086:8c14] type 01 class 0x060400
[    0.843320] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.843592] pci 0000:00:1c.2: [8086:8c10] type 01 class 0x060400
[    0.843662] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.843932] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.844004] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.844274] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[    0.844344] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.844615] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.844636] pci 0000:00:1d.0: reg 0x10: [mem 0xd371c000-0xd371c3ff]
[    0.844718] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.844939] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
[    0.845250] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    0.845268] pci 0000:00:1f.2: reg 0x10: [io  0x6088-0x608f]
[    0.845275] pci 0000:00:1f.2: reg 0x14: [io  0x6094-0x6097]
[    0.845282] pci 0000:00:1f.2: reg 0x18: [io  0x6080-0x6087]
[    0.845289] pci 0000:00:1f.2: reg 0x1c: [io  0x6090-0x6093]
[    0.845297] pci 0000:00:1f.2: reg 0x20: [io  0x6060-0x607f]
[    0.845304] pci 0000:00:1f.2: reg 0x24: [mem 0xd371b000-0xd371b7ff]
[    0.845340] pci 0000:00:1f.2: PME# supported from D3hot
[    0.845551] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.845570] pci 0000:00:1f.3: reg 0x10: [mem 0xd3719000-0xd37190ff 64bit]
[    0.845593] pci 0000:00:1f.3: reg 0x20: [io  0x6040-0x605f]
[    0.845868] pci 0000:01:00.0: [10de:1292] type 00 class 0x030200
[    0.845893] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[    0.845907] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.845920] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[    0.845930] pci 0000:01:00.0: reg 0x24: [io  0x5000-0x507f]
[    0.845939] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.846099] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.846101] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.846104] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd2ffffff]
[    0.846107] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[    0.846185] pci 0000:07:00.0: [1814:3290] type 00 class 0x028000
[    0.846212] pci 0000:07:00.0: reg 0x10: [mem 0xd3610000-0xd361ffff]
[    0.846336] pci 0000:07:00.0: PME# supported from D0 D3hot
[    0.846370] pci 0000:07:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:1c.0 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[    0.846432] pci 0000:07:00.1: [1814:3298] type 00 class 0x0d1100
[    0.846459] pci 0000:07:00.1: reg 0x10: [mem 0xd3600000-0xd360ffff]
[    0.846582] pci 0000:07:00.1: supports D1
[    0.846583] pci 0000:07:00.1: PME# supported from D0 D1 D3hot
[    0.846685] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.846690] pci 0000:00:1c.0:   bridge window [mem 0xd3600000-0xd36fffff]
[    0.846746] pci 0000:00:1c.2: PCI bridge to [bus 08]
[    0.846916] pci 0000:09:00.0: [10ec:5227] type 00 class 0xff0000
[    0.847016] pci 0000:09:00.0: reg 0x10: [mem 0xd1000000-0xd1000fff]
[    0.847361] pci 0000:09:00.0: supports D1 D2
[    0.847363] pci 0000:09:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.847441] pci 0000:09:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:1c.3 (capable of 7.876 Gb/s with 8 GT/s x1 link)
[    0.847588] pci 0000:00:1c.3: PCI bridge to [bus 09-0e]
[    0.847592] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.847595] pci 0000:00:1c.3:   bridge window [mem 0xd1000000-0xd1ffffff]
[    0.847600] pci 0000:00:1c.3:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.847676] pci 0000:0f:00.0: [10ec:8168] type 00 class 0x020000
[    0.847706] pci 0000:0f:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.847734] pci 0000:0f:00.0: reg 0x18: [mem 0xd3500000-0xd3500fff 64bit]
[    0.847752] pci 0000:0f:00.0: reg 0x20: [mem 0xd3400000-0xd3403fff 64bit pref]
[    0.847848] pci 0000:0f:00.0: supports D1 D2
[    0.847849] pci 0000:0f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.847964] pci 0000:00:1c.6: PCI bridge to [bus 0f]
[    0.847968] pci 0000:00:1c.6:   bridge window [io  0x3000-0x3fff]
[    0.847971] pci 0000:00:1c.6:   bridge window [mem 0xd3500000-0xd35fffff]
[    0.847976] pci 0000:00:1c.6:   bridge window [mem 0xd3400000-0xd34fffff 64bit pref]
[    0.848950] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.849024] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.849093] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.849161] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.849228] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.849296] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.849365] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.849436] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.849998] ACPI: EC: interrupt unblocked
[    0.849998] ACPI: EC: event unblocked
[    0.849998] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.849998] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
[    0.850003] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.850003] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.850003] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.850003] vgaarb: loaded
[    0.850003] ACPI: bus type USB registered
[    0.850003] usbcore: registered new interface driver usbfs
[    0.850003] usbcore: registered new interface driver hub
[    0.850003] usbcore: registered new device driver usb
[    0.850003] pps_core: LinuxPPS API ver. 1 registered
[    0.850003] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.850003] PTP clock support registered
[    0.850003] EDAC MC: Ver: 3.0.0
[    0.850003] Registered efivars operations
[    0.899353] PCI: Using ACPI for IRQ routing
[    0.906712] PCI: pci_cache_line_size set to 64 bytes
[    0.906802] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[    0.906804] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    0.906805] e820: reserve RAM buffer [mem 0x9c67f000-0x9fffffff]
[    0.906806] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[    0.906807] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
[    0.906905] NetLabel: Initializing
[    0.906907] NetLabel:  domain hash size = 128
[    0.906907] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.906920] NetLabel:  unlabeled traffic allowed by default
[    0.906923] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.906923] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.908927] clocksource: Switched to clocksource tsc-early
[    0.918701] VFS: Disk quotas dquot_6.6.0
[    0.918717] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.918783] pnp: PnP ACPI init
[    0.918973] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.918976] system 00:00: [io  0xffff] has been reserved
[    0.918979] system 00:00: [io  0xffff] has been reserved
[    0.918980] system 00:00: [io  0xffff] has been reserved
[    0.918982] system 00:00: [io  0x0500-0x0501] has been reserved
[    0.918983] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.918985] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.918990] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.919050] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.919054] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.919075] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.919132] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.919135] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.919163] pnp 00:04: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    0.919188] pnp 00:05: Plug and Play ACPI device, IDs SYN1e89 SYN1e00 SYN0002 PNP0f13 PNP0f03 (active)
[    0.919369] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.919371] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.919372] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.919374] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.919376] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.919377] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.919379] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.919381] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[    0.919382] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.919384] system 00:06: [mem 0x9fa20000-0x9fa20fff] has been reserved
[    0.919385] system 00:06: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[    0.919389] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.920217] pnp: PnP ACPI: found 7 devices
[    0.926037] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.926041] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.926077] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
[    0.926079] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.926081] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.926084] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd2ffffff]
[    0.926086] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[    0.926090] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.926095] pci 0000:00:1c.0:   bridge window [mem 0xd3600000-0xd36fffff]
[    0.926103] pci 0000:00:1c.2: PCI bridge to [bus 08]
[    0.926114] pci 0000:00:1c.3: PCI bridge to [bus 09-0e]
[    0.926116] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.926120] pci 0000:00:1c.3:   bridge window [mem 0xd1000000-0xd1ffffff]
[    0.926124] pci 0000:00:1c.3:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.926130] pci 0000:00:1c.6: PCI bridge to [bus 0f]
[    0.926132] pci 0000:00:1c.6:   bridge window [io  0x3000-0x3fff]
[    0.926137] pci 0000:00:1c.6:   bridge window [mem 0xd3500000-0xd35fffff]
[    0.926140] pci 0000:00:1c.6:   bridge window [mem 0xd3400000-0xd34fffff 64bit pref]
[    0.926147] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.926148] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.926150] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.926151] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.926152] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.926154] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.926155] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.926156] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.926158] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.926159] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.926160] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.926162] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.926163] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.926164] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.926166] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.926167] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.926168] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff window]
[    0.926170] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.926171] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd2ffffff]
[    0.926173] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
[    0.926174] pci_bus 0000:07: resource 1 [mem 0xd3600000-0xd36fffff]
[    0.926176] pci_bus 0000:09: resource 0 [io  0x4000-0x4fff]
[    0.926177] pci_bus 0000:09: resource 1 [mem 0xd1000000-0xd1ffffff]
[    0.926178] pci_bus 0000:09: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.926180] pci_bus 0000:0f: resource 0 [io  0x3000-0x3fff]
[    0.926181] pci_bus 0000:0f: resource 1 [mem 0xd3500000-0xd35fffff]
[    0.926182] pci_bus 0000:0f: resource 2 [mem 0xd3400000-0xd34fffff 64bit pref]
[    0.926311] NET: Registered protocol family 2
[    0.926443] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.926472] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.926572] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.926699] TCP: Hash tables configured (established 65536 bind 65536)
[    0.926727] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.926751] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.926805] NET: Registered protocol family 1
[    0.926809] NET: Registered protocol family 44
[    0.926818] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.942357] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c6 took 13754 usecs
[    0.942409] PCI: CLS 64 bytes, default 64
[    0.942439] Unpacking initramfs...
[    1.079760] Freeing initrd memory: 11100K
[    1.079764] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.079766] software IO TLB: mapped [mem 0x90246000-0x94246000] (64MB)
[    1.079929] Scanning for low memory corruption every 60 seconds
[    1.080460] Initialise system trusted keyrings
[    1.080469] Key type blacklist registered
[    1.080513] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    1.081621] zbud: loaded
[    1.081879] pstore: using zstd compression
[    1.082900] Key type asymmetric registered
[    1.082901] Asymmetric key parser 'x509' registered
[    1.082907] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.082944] io scheduler noop registered
[    1.082945] io scheduler deadline registered
[    1.082970] io scheduler cfq registered (default)
[    1.082971] io scheduler mq-deadline registered
[    1.082971] io scheduler kyber registered
[    1.082991] io scheduler bfq registered
[    1.083804] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.083869] efifb: probing for efifb
[    1.083881] efifb: framebuffer at 0xc0000000, using 8128k, total 8128k
[    1.083882] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    1.083882] efifb: scrolling: redraw
[    1.083884] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.083924] fbcon: Deferring console take-over
[    1.083925] fb0: EFI VGA frame buffer device
[    1.083932] intel_idle: MWAIT substates: 0x42120
[    1.083933] intel_idle: v0.4.1 model 0x3C
[    1.084232] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.084306] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.084313] ACPI: Lid Switch [LID0]
[    1.084341] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.084348] ACPI: Power Button [PWRB]
[    1.084380] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.084390] ACPI: Power Button [PWRF]
[    1.090651] thermal LNXTHERM:00: registered as thermal_zone0
[    1.090652] ACPI: Thermal Zone [TZ00] (53 C)
[    1.091981] thermal LNXTHERM:01: registered as thermal_zone1
[    1.091982] ACPI: Thermal Zone [TZ01] (54 C)
[    1.097958] thermal LNXTHERM:02: registered as thermal_zone2
[    1.097961] ACPI: Thermal Zone [TZ02] (40 C)
[    1.098194] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.099479] usbcore: registered new interface driver usbserial_generic
[    1.099483] usbserial: USB Serial support registered for generic
[    1.099502] rtc_cmos 00:02: RTC can wake from S4
[    1.099703] rtc_cmos 00:02: registered as rtc0
[    1.099717] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.099768] intel_pstate: Intel P-state driver initializing
[    1.100185] ledtrig-cpu: registered to indicate activity on CPUs
[    1.100812] NET: Registered protocol family 10
[    1.110671] Segment Routing with IPv6
[    1.110717] NET: Registered protocol family 17
[    1.112014] RAS: Correctable Errors collector initialized.
[    1.112103] microcode: sig=0x306c3, pf=0x10, revision=0x25
[    1.112292] microcode: Microcode Update Driver: v2.2.
[    1.112313] sched_clock: Marking stable (1111963786, 317932)->(1155970270, -43688552)
[    1.112784] registered taskstats version 1
[    1.112805] Loading compiled-in X.509 certificates
[    1.115760] Loaded X.509 cert 'Build time autogenerated kernel key: f6e1d5f82d4152da860d0481a64791fa607402d9'
[    1.115778] zswap: loaded using pool lzo/zbud
[    1.118503] Key type big_key registered
[    1.119132]   Magic number: 10:432:273
[    1.119149] tty tty10: hash matches
[    1.119153] net lo: hash matches
[    1.119230] rtc_cmos 00:02: setting system clock to 2018-11-23 09:17:38 UTC (1542964658)
[    1.324221] Freeing unused decrypted memory: 2040K
[    1.472600] Freeing unused kernel image memory: 1532K
[    1.472635] Write protecting the kernel read-only data: 18432k
[    1.473594] Freeing unused kernel image memory: 2008K
[    1.473739] Freeing unused kernel image memory: 456K
[    1.480013] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.480014] x86/mm: Checking user space page tables
[    1.486203] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.486204] Run /init as init process
[    1.561404] fbcon: Taking over console
[    1.561547] Console: switching to colour frame buffer device 240x67
[    1.608647] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.612747] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.612794] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.614354] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.615464] ehci-pci: EHCI PCI platform driver
[    1.615630] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.615634] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.615644] ehci-pci 0000:00:1d.0: debug port 2
[    1.619496] SCSI subsystem initialized
[    1.619548] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.619561] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd371c000
[    1.628815] libata version 3.00 loaded.
[    1.631431] ahci 0000:00:1f.2: version 3.0
[    1.631604] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[    1.631606] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.631972] scsi host0: ahci
[    1.632106] scsi host1: ahci
[    1.632189] scsi host2: ahci
[    1.632320] scsi host3: ahci
[    1.632411] scsi host4: ahci
[    1.632497] scsi host5: ahci
[    1.632556] ata1: SATA max UDMA/133 abar m2048@0xd371b000 port 0xd371b100 irq 25
[    1.632557] ata2: DUMMY
[    1.632558] ata3: DUMMY
[    1.632558] ata4: DUMMY
[    1.632559] ata5: DUMMY
[    1.632559] ata6: DUMMY
[    1.635581] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.635655] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.635657] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.635659] usb usb1: Product: EHCI Host Controller
[    1.635660] usb usb1: Manufacturer: Linux 4.19.2-arch1-1-ARCH ehci_hcd
[    1.635661] usb usb1: SerialNumber: 0000:00:1d.0
[    1.635781] hub 1-0:1.0: USB hub found
[    1.635794] hub 1-0:1.0: 2 ports detected
[    1.635953] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.635960] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.637033] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    1.637039] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.637201] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.637203] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.637204] usb usb2: Product: xHCI Host Controller
[    1.637206] usb usb2: Manufacturer: Linux 4.19.2-arch1-1-ARCH xhci-hcd
[    1.637207] usb usb2: SerialNumber: 0000:00:14.0
[    1.637324] hub 2-0:1.0: USB hub found
[    1.637345] hub 2-0:1.0: 14 ports detected
[    1.640092] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.640097] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.640102] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    1.640161] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    1.640162] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.640164] usb usb3: Product: xHCI Host Controller
[    1.640165] usb usb3: Manufacturer: Linux 4.19.2-arch1-1-ARCH xhci-hcd
[    1.640166] usb usb3: SerialNumber: 0000:00:14.0
[    1.640280] hub 3-0:1.0: USB hub found
[    1.640297] hub 3-0:1.0: 6 ports detected
[    1.644047] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.946371] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.948149] ata1.00: ATA-9: HGST HTS541010A9E680, JA0OA710, max UDMA/133
[    1.948153] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.950070] ata1.00: configured for UDMA/133
[    1.960577] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS541010A9 A710 PQ: 0 ANSI: 5
[    1.968954] usb 2-7: new high-speed USB device number 2 using xhci_hcd
[    1.968971] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.972715] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.972717] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.972722] sd 0:0:0:0: [sda] Write Protect is off
[    1.972724] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.972732] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.037869]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[    2.038639] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.102310] tsc: Refined TSC clocksource calibration: 2394.456 MHz
[    2.102322] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c236f90, max_idle_ns: 440795217409 ns
[    2.102358] clocksource: Switched to clocksource tsc
[    2.116326] usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
[    2.116331] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.116822] hub 1-1:1.0: USB hub found
[    2.116982] hub 1-1:1.0: 8 ports detected
[    2.167305] usb 2-7: New USB device found, idVendor=04f2, idProduct=b40d, bcdDevice=18.30
[    2.167308] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.167310] usb 2-7: Product: HP Truevision HD
[    2.167312] usb 2-7: Manufacturer: SunplusIT INC.
[    2.358981] usb 2-14: new full-speed USB device number 3 using xhci_hcd
[    2.500593] usb 2-14: New USB device found, idVendor=138a, idProduct=0050, bcdDevice= 0.60
[    2.500598] usb 2-14: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.500601] usb 2-14: SerialNumber: 99100020e631
[    2.821059] random: fast init done
[    2.932258] raid6: sse2x1   gen() 10122 MB/s
[    2.988902] raid6: sse2x1   xor()  8351 MB/s
[    3.045568] raid6: sse2x2   gen() 13933 MB/s
[    3.102234] raid6: sse2x2   xor()  9232 MB/s
[    3.158900] raid6: sse2x4   gen() 16887 MB/s
[    3.215567] raid6: sse2x4   xor() 10472 MB/s
[    3.272234] raid6: avx2x1   gen() 23186 MB/s
[    3.328901] raid6: avx2x1   xor() 15777 MB/s
[    3.385568] raid6: avx2x2   gen() 26518 MB/s
[    3.442235] raid6: avx2x2   xor() 16710 MB/s
[    3.498901] raid6: avx2x4   gen() 30638 MB/s
[    3.555568] raid6: avx2x4   xor() 19410 MB/s
[    3.555569] raid6: using algorithm avx2x4 gen() 30638 MB/s
[    3.555569] raid6: .... xor() 19410 MB/s, rmw enabled
[    3.555570] raid6: using avx2x2 recovery algorithm
[    3.556443] xor: automatically using best checksumming function   avx       
[    3.587231] Btrfs loaded, crc32c=crc32c-intel
[    3.626238] BTRFS: device fsid 026013a5-1b12-44c5-a2ad-2135d83f20c9 devid 1 transid 1558998 /dev/sda6
[    3.643977] BTRFS: device fsid 7ca82729-eaab-4918-816a-bc2f53d88229 devid 1 transid 22105 /dev/sda3
[    3.661709] BTRFS: device fsid 09535cae-77b4-4b89-9b35-1d058bdbaeb8 devid 1 transid 145 /dev/sda4
[    4.471566] BTRFS info (device sda6): disk space caching is enabled
[    4.576219] BTRFS info (device sda6): bdev /dev/sda6 errs: wr 2, rd 776, flush 0, corrupt 0, gen 0
[    5.542290] random: crng init done
[   10.370026] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[   10.385743] systemd[1]: Detected architecture x86-64.
[   10.409689] systemd[1]: Set hostname to <Illuvatar>.
[   11.956517] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   11.968601] systemd[1]: Listening on LVM2 poll daemon socket.
[   11.969000] systemd[1]: Listening on Journal Socket.
[   11.971633] systemd[1]: Starting Remount Root and Kernel File Systems...
[   11.972825] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   11.976914] systemd[1]: Listening on Process Core Dump Socket.
[   11.977341] systemd[1]: Created slice system-getty.slice.
[   12.242747] audit: type=1130 audit(1542964669.619:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.256859] audit: type=1130 audit(1542964669.633:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.281206] audit: type=1130 audit(1542964669.656:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.468259] audit: type=1130 audit(1542964669.843:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.717347] audit: type=1130 audit(1542964670.093:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.845706] BTRFS info (device sda6): use lzo compression, level 0
[   13.845713] BTRFS info (device sda6): enabling ssd optimizations
[   13.845717] BTRFS info (device sda6): enabling auto defrag
[   13.845724] BTRFS info (device sda6): disk space caching is enabled
[   13.847940] audit: type=1130 audit(1542964671.223:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.964389] vboxdrv: loading out-of-tree module taints kernel.
[   13.964502] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   13.968357] vboxdrv: Found 8 processor cores
[   13.985776] vboxdrv: TSC mode is Invariant, tentative frequency 2394452560 Hz
[   13.985777] vboxdrv: Successfully loaded version 5.2.22 (interface 0x00290001)
[   14.000540] VBoxPciLinuxInit
[   14.000543] vboxpci: IOMMU not found (not registered)
[   14.039767] VBoxNetAdp: Successfully started.
[   14.092766] VBoxNetFlt: Successfully started.
[   14.093730] audit: type=1130 audit(1542964671.469:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.193104] audit: type=1130 audit(1542964671.569:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.490514] audit: type=1130 audit(1542964673.866:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.087647] audit: type=1130 audit(1542964674.463:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.011828] audit: type=1130 audit(1542964675.386:12): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hwdb-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.651417] audit: type=1130 audit(1542964676.029:13): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.740488] EDAC ie31200: No ECC support
[   18.756008] battery: ACPI: Battery Slot [BAT0] (battery present)
[   18.787730] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
[   18.787732] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
[   18.787733] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
[   18.787735] wmi_bus wmi_bus-PNP0C14:00: WQ data block query control method not found
[   18.787859] wmi_bus wmi_bus-PNP0C14:01: WQBJ data block query control method not found
[   18.790846] input: HP Wireless hotkeys as /devices/virtual/input/input5
[   18.901090] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20180810/utaddress-213)
[   18.901096] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000183F (\_SB.PCI0.LPCB.PMBS) (20180810/utaddress-213)
[   18.901099] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.901102] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20180810/utaddress-213)
[   18.901105] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000863 (\GPIO) (20180810/utaddress-213)
[   18.901108] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.901108] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20180810/utaddress-213)
[   18.901111] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20180810/utaddress-213)
[   18.901113] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\_SB.PCI0.LPCB.GPIO) (20180810/utaddress-213)
[   18.901116] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000863 (\GPIO) (20180810/utaddress-213)
[   18.901118] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.901119] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000085F (\_SB.PCI0.PEG0.PEGP.GPIO) (20180810/utaddress-213)
[   18.901121] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20180810/utaddress-213)
[   18.901124] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20180810/utaddress-213)
[   18.901126] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\_SB.PCI0.LPCB.GPIO) (20180810/utaddress-213)
[   18.901129] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000863 (\GPIO) (20180810/utaddress-213)
[   18.901131] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.901132] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   18.949007] ACPI: AC Adapter [AC] (on-line)
[   18.998935] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[   18.998937] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   18.998938] RAPL PMU: hw unit of domain package 2^-14 Joules
[   18.998939] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   18.998940] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   19.107209] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   19.197547] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[   19.197571] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   19.212660] hp_accel: laptop model unknown, using default axes configuration
[   19.215447] lis3lv02d: 8 bits 3DC sensor found
[   19.236064] libphy: r8169: probed
[   19.236352] r8169 0000:0f:00.0 eth0: RTL8168g/8111g, 64:51:06:01:90:56, XID 4c000800, IRQ 27
[   19.236355] r8169 0000:0f:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   19.260623] Linux agpgart interface v0.103
[   19.284226] ipmi message handler version 39.2
[   19.298394] ipmi device interface
[   19.329653] cryptd: max_cpu_qlen set to 1000
[   19.383965] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   19.385842] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   19.407193] psmouse serio1: synaptics: queried max coordinates: x [..5660], y [..4702]
[   19.423451] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   19.423453] cfg80211: failed to load regulatory.db
[   19.440645] psmouse serio1: synaptics: queried min coordinates: x [1282..], y [1152..]
[   19.440652] psmouse serio1: synaptics: Your touchpad (PNP: SYN1e89 SYN1e00 SYN0002 PNP0f13 PNP0f03) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[   19.508598] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127c00/0x0, board id: 2667, fw id: 1280283
[   19.521368] AVX2 version of gcm_enc/dec engaged.
[   19.521370] AES CTR mode by8 optimization enabled
[   19.532314] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8
[   19.543617] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[   19.781177] snd_hda_codec_idt hdaudioC1D0: autoconfig for 92HD91BXX: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   19.781179] snd_hda_codec_idt hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   19.781180] snd_hda_codec_idt hdaudioC1D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[   19.781181] snd_hda_codec_idt hdaudioC1D0:    mono: mono_out=0x0
[   19.781182] snd_hda_codec_idt hdaudioC1D0:    inputs:
[   19.781184] snd_hda_codec_idt hdaudioC1D0:      Internal Mic=0x11
[   19.781185] snd_hda_codec_idt hdaudioC1D0:      Mic=0xa
[   19.805362] VFIO - User Level meta-driver version: 0.3
[   19.820507] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[   19.821181] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[   19.821235] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[   19.884721] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[   19.888229] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[   19.923429] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   20.277627] checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
[   20.277628] fb: switching to inteldrmfb from EFI VGA
[   20.277643] Console: switching to colour dummy device 80x25
[   20.277709] [drm] Replacing VGA console driver
[   20.277770] [drm] ACPI BIOS requests an excessive sleep of 40000 ms, using 1500 ms instead
[   20.278373] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   20.278374] [drm] Driver supports precise vblank timestamp query.
[   20.278727] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   20.290691] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[   20.291256] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[   20.291261] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.GFX0.DD02._BCL], AE_NOT_FOUND (20180810/psargs-330)
[   20.291271] ACPI Error: Method parse/execution failed \_SB.PCI0.PEG0.PEGP.DD02._BCL, AE_NOT_FOUND (20180810/psparse-516)
[   20.291417] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.GFX0.DD02._BCL], AE_NOT_FOUND (20180810/psargs-330)
[   20.291423] ACPI Error: Method parse/execution failed \_SB.PCI0.PEG0.PEGP.DD02._BCL, AE_NOT_FOUND (20180810/psparse-516)
[   20.291461] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4b/LNXVIDEO:00/input/input13
[   20.292510] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   20.293459] acpi device:65: registered as cooling_device10
[   20.293517] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14
[   20.293618] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   20.297651] fbcon: inteldrmfb (fb0) is primary device
[   20.599764] intel_rapl: Found RAPL domain package
[   20.599765] intel_rapl: Found RAPL domain core
[   20.599765] intel_rapl: Found RAPL domain uncore
[   20.599766] intel_rapl: Found RAPL domain dram
[   20.599768] intel_rapl: RAPL package 0 domain package locked by BIOS
[   20.611167] r8169 0000:0f:00.0 eno1: renamed from eth0
[   20.719082] nvidia: module license 'NVIDIA' taints kernel.
[   20.719083] Disabling lock debugging due to kernel taint
[   20.733162] nvidia-nvlink: Nvlink Core is being initialized, major device number 238
[   20.733389] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[   20.734901] mousedev: PS/2 mouse device common for all mice
[   20.742506] hp_wmi: query 0xd returned error 0x5
[   20.742541] input: HP WMI hotkeys as /devices/virtual/input/input12
[   20.750270] iTCO_vendor_support: vendor-support=0
[   20.833704] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  415.18  Thu Nov 15 22:01:24 CST 2018 (using threaded interrupts)
[   20.899595] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   20.899651] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[   20.899778] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   20.905229] rt2800pci 0000:07:00.0 wlo1: renamed from wlan0
[   20.966981] intel-spi intel-spi: mx25l6405d (8192 Kbytes)
[   20.985126] Adding 16777212k swap on /dev/sda5.  Priority:-2 extents:1 across:16777212k FS
[   20.991525] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  415.18  Thu Nov 15 21:35:37 CST 2018
[   21.031052] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[   21.031055] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[   21.077543] Creating 1 MTD partitions on "intel-spi":
[   21.077546] 0x000000000000-0x000000800000 : "BIOS"
[   21.417572] Console: switching to colour frame buffer device 240x67
[   21.439269] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   21.530320] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[   21.530378] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[   21.530430] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[   21.530479] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[   21.530531] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[   22.110185] BTRFS info (device sda4): use lzo compression, level 0
[   22.110190] BTRFS info (device sda4): enabling ssd optimizations
[   22.110192] BTRFS info (device sda4): enabling auto defrag
[   22.110195] BTRFS info (device sda4): disk space caching is enabled
[   22.110196] BTRFS info (device sda4): has skinny extents
[   22.298016] media: Linux media interface: v0.10
[   22.335860] videodev: Linux video capture interface: v2.00
[   22.563627] uvcvideo: Found UVC 1.00 device HP Truevision HD (04f2:b40d)
[   22.585404] uvcvideo 2-7:1.0: Entity type for entity Extension 4 was not initialized!
[   22.585407] uvcvideo 2-7:1.0: Entity type for entity Extension 3 was not initialized!
[   22.585409] uvcvideo 2-7:1.0: Entity type for entity Processing 2 was not initialized!
[   22.585411] uvcvideo 2-7:1.0: Entity type for entity Camera 1 was not initialized!
[   22.585533] input: HP Truevision HD: HP Truevision as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input20
[   22.585700] usbcore: registered new interface driver uvcvideo
[   22.585701] USB Video Class driver (1.1.1)
[   22.636040] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   23.111196] audit: type=1130 audit(1542964680.486:14): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   23.128435] audit: type=1130 audit(1542964680.506:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:intel_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   23.128878] audit: type=1130 audit(1542964680.506:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:acpi_video0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   23.139498] audit: type=1130 audit(1542964680.516:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   23.238259] systemd-journald[298]: Received request to flush runtime journal from PID 1
[   23.842852] audit: type=1130 audit(1542964681.219:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   28.146080] audit: type=1131 audit(1542964685.523:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   32.714472] audit: type=1130 audit(1542964690.089:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   33.746129] audit: type=1130 audit(1542964691.123:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   33.839700] audit: type=1127 audit(1542964691.216:22): pid=547 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[   33.863741] audit: type=1130 audit(1542964691.239:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   45.385775] audit: type=1130 audit(1542964702.763:24): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   45.453192] audit: type=1130 audit(1542964702.829:25): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   45.527466] audit: type=1130 audit(1542964702.903:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   45.542573] audit: type=1130 audit(1542964702.919:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cronie comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   45.753557] audit: type=1325 audit(1542964703.129:28): table=filter family=2 entries=0
[   45.753656] audit: type=1300 audit(1542964703.129:28): arch=c000003e syscall=175 success=yes exit=0 a0=55f51d52d850 a1=2669 a2=55f51bfbfde6 a3=55f51d529010 items=0 ppid=317 pid=558 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/usr/bin/kmod" key=(null)
[   45.753660] audit: type=1327 audit(1542964703.129:28): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F66696C746572
[   47.093533] audit: type=1325 audit(1542964704.469:29): table=filter family=2 entries=4
[   47.093541] audit: type=1300 audit(1542964704.469:29): arch=c000003e syscall=54 success=yes exit=0 a0=5 a1=0 a2=40 a3=560101689510 items=0 ppid=1 pid=554 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-restor" exe="/usr/bin/xtables-legacy-multi" key=(null)
[   47.093545] audit: type=1327 audit(1542964704.469:29): proctitle=2F7573722F62696E2F69707461626C65732D726573746F7265002F6574632F69707461626C65732F69707461626C65732E72756C6573
[   50.637391] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   50.703212] Generic PHY r8169-f00:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-f00:00, irq=IGNORE)
[   50.831260] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   50.831833] r8169 0000:0f:00.0 eno1: Link is Down
[   50.836126] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   50.836189] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[   50.897219] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[   51.011810] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   51.130272] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   51.755482] kauditd_printk_skb: 16 callbacks suppressed
[   51.755486] audit: type=1130 audit(1542964709.129:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=wpa_supplicant comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   51.850688] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   53.060598] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   53.676909] audit: type=1130 audit(1542964711.053:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   54.181019] wlo1: authenticate with 50:65:f3:d0:b4:50
[   54.182422] wlo1: send auth to 50:65:f3:d0:b4:50 (try 1/3)
[   54.183931] wlo1: authenticated
[   54.185610] wlo1: associate with 50:65:f3:d0:b4:50 (try 1/3)
[   54.187912] wlo1: RX AssocResp from 50:65:f3:d0:b4:50 (capab=0x431 status=0 aid=2)
[   54.188013] wlo1: associated
[   54.788471] audit: type=1130 audit(1542964712.163:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=colord comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   55.452978] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[   55.453118] r8169 0000:0f:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
[   55.473431] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20180810/nsarguments-66)
[   55.818396] audit: type=1130 audit(1542964713.193:45): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=org.cups.cupsd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   57.321894] wlo1: deauthenticating from 50:65:f3:d0:b4:50 by local choice (Reason: 3=DEAUTH_LEAVING)
[   68.633070] wlo1: authenticate with 14:58:d0:29:5e:10
[   68.635714] wlo1: send auth to 14:58:d0:29:5e:10 (try 1/3)
[   68.637340] wlo1: authenticated
[   68.638924] wlo1: associate with 14:58:d0:29:5e:10 (try 1/3)
[   68.641187] wlo1: RX AssocResp from 14:58:d0:29:5e:10 (capab=0x431 status=0 aid=4)
[   68.641287] wlo1: associated
[   70.010146] audit: type=1131 audit(1542964727.386:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   73.633180] audit: type=1130 audit(1542964731.009:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   78.002019] wlo1: deauthenticating from 14:58:d0:29:5e:10 by local choice (Reason: 3=DEAUTH_LEAVING)
[   79.037178] audit: type=1131 audit(1542964736.413:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   79.157501] wlo1: authenticate with 14:58:d0:29:5e:10
[   79.159002] wlo1: send auth to 14:58:d0:29:5e:10 (try 1/3)
[   79.160473] wlo1: authenticated
[   79.162247] wlo1: associate with 14:58:d0:29:5e:10 (try 1/3)
[   79.164519] wlo1: RX AssocResp from 14:58:d0:29:5e:10 (capab=0x431 status=0 aid=4)
[   79.164592] wlo1: associated
[   80.357096] audit: type=1006 audit(1542964737.736:49): pid=713 uid=0 old-auid=4294967295 auid=1000 tty=tty2 old-ses=4294967295 ses=1 res=1
[   80.439130] audit: type=1130 audit(1542964737.816:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   80.446078] audit: type=1006 audit(1542964737.823:51): pid=720 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   80.813573] audit: type=1130 audit(1542964738.189:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   82.251016] wlo1: deauthenticating from 14:58:d0:29:5e:10 by local choice (Reason: 3=DEAUTH_LEAVING)
[   93.559715] wlo1: authenticate with 50:65:f3:d0:e1:10
[   93.562368] wlo1: send auth to 50:65:f3:d0:e1:10 (try 1/3)
[   93.563803] wlo1: authenticated
[   93.565602] wlo1: associate with 50:65:f3:d0:e1:10 (try 1/3)
[   93.568065] wlo1: RX AssocResp from 50:65:f3:d0:e1:10 (capab=0x431 status=0 aid=1)
[   93.568204] wlo1: associated
[   96.824960] wlo1: deauthenticating from 50:65:f3:d0:e1:10 by local choice (Reason: 3=DEAUTH_LEAVING)
[  103.009763] wlo1: authenticate with 50:65:f3:d0:00:90
[  103.011508] wlo1: send auth to 50:65:f3:d0:00:90 (try 1/3)
[  103.064141] wlo1: send auth to 50:65:f3:d0:00:90 (try 2/3)
[  103.092953] wlo1: send auth to 50:65:f3:d0:00:90 (try 3/3)
[  103.130876] wlo1: authentication with 50:65:f3:d0:00:90 timed out
[  103.393120] wlo1: authenticate with 50:65:f3:d0:e5:10
[  103.395693] wlo1: send auth to 50:65:f3:d0:e5:10 (try 1/3)
[  103.397363] wlo1: authenticated
[  103.398920] wlo1: associate with 50:65:f3:d0:e5:10 (try 1/3)
[  103.451516] wlo1: RX AssocResp from 50:65:f3:d0:e5:10 (capab=0x431 status=0 aid=1)
[  103.451595] wlo1: associated
[  106.811018] wlo1: deauthenticating from 50:65:f3:d0:e5:10 by local choice (Reason: 3=DEAUTH_LEAVING)
[  117.129408] wlo1: authenticate with 50:65:f3:d0:d6:d0
[  117.132275] wlo1: send auth to 50:65:f3:d0:d6:d0 (try 1/3)
[  117.149940] wlo1: authenticated
[  117.152257] wlo1: associate with 50:65:f3:d0:d6:d0 (try 1/3)
[  117.162906] wlo1: RX AssocResp from 50:65:f3:d0:d6:d0 (capab=0x431 status=0 aid=1)
[  117.162982] wlo1: associated
[  128.005077] wlo1: deauthenticating from 50:65:f3:d0:d6:d0 by local choice (Reason: 3=DEAUTH_LEAVING)
[  128.070393] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[  128.186913] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[  143.632925] audit: type=1006 audit(1542964801.009:53): pid=6818 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[  472.180592] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[  651.403114] systemd: 30 output lines suppressed due to ratelimiting
[  651.410111] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[  651.425645] systemd[1]: Detected architecture x86-64.
[  743.677034] audit: type=1006 audit(1542965401.053:54): pid=32429 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=4 res=1
[  787.180722] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[  921.753521] audit: type=1130 audit(1542965579.129:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  921.753525] audit: type=1131 audit(1542965579.129:56): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1102.180092] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 1343.695829] audit: type=1006 audit(1542966001.073:57): pid=10202 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=5 res=1
[ 1417.124416] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 1638.479236] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 1638.495552] systemd[1]: Detected architecture x86-64.
[ 1732.117730] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 1943.709353] audit: type=1006 audit(1542966601.086:58): pid=22856 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=6 res=1
[ 2047.135424] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 2362.180030] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 2545.340355] audit: type=1006 audit(1542967202.719:59): pid=22961 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=7 res=1
[ 2677.126001] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 2992.117763] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 3145.973494] audit: type=1006 audit(1542967803.349:60): pid=23080 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=8 res=1
[ 3202.061992] audit: type=1130 audit(1542967859.439:61): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty3 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3214.048824] audit: type=1006 audit(1542967871.426:62): pid=23087 uid=0 old-auid=4294967295 auid=1000 tty=tty3 old-ses=4294967295 ses=9 res=1
[ 3307.134165] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 3494.684969] usb 2-1: new high-speed USB device number 4 using xhci_hcd
[ 3494.826133] usb 2-1: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
[ 3494.826135] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3494.826136] usb 2-1: Product: Flash DISK
[ 3494.826137] usb 2-1: Manufacturer: USB
[ 3494.826138] usb 2-1: SerialNumber: BB3L43F6B8B51BZ7
[ 3495.878383] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 3495.878481] scsi host6: usb-storage 2-1:1.0
[ 3495.878565] usbcore: registered new interface driver usb-storage
[ 3495.887463] usbcore: registered new interface driver uas
[ 3497.061122] scsi 6:0:0:0: Direct-Access     USB      Flash DISK       1100 PQ: 0 ANSI: 4
[ 3497.061649] sd 6:0:0:0: [sdb] 7864320 512-byte logical blocks: (4.03 GB/3.75 GiB)
[ 3497.062077] sd 6:0:0:0: [sdb] Write Protect is off
[ 3497.062078] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 3497.062500] sd 6:0:0:0: [sdb] No Caching mode page found
[ 3497.062526] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3497.064834]  sdb: sdb1
[ 3497.066385] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3530.141295] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3622.149512] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
/var/log/pacman.log

...
[2018-11-22 12:23] [PACMAN] Running 'pacman -Syu'
[2018-11-22 12:23] [PACMAN] synchronizing package lists
[2018-11-22 12:26] [PACMAN] Running 'pacman -Syu'
[2018-11-22 12:26] [PACMAN] synchronizing package lists
[2018-11-22 12:26] [PACMAN] starting full system upgrade
[2018-11-22 12:29] [ALPM] running 'ghc-unregister.hook'...
[2018-11-22 12:30] [ALPM] transaction started
[2018-11-22 12:30] [ALPM] upgraded a52dec (0.7.4-9 -> 0.7.4-10)
[2018-11-22 12:30] [ALPM] upgraded libcap (2.25-1 -> 2.25-2)
[2018-11-22 12:30] [ALPM] upgraded libsystemd (239.2-1 -> 239.300-2)
[2018-11-22 12:30] [ALPM] upgraded aalib (1.4rc5-12 -> 1.4rc5-13)
[2018-11-22 12:30] [ALPM] upgraded libutil-linux (2.32.1-2 -> 2.33-2)
[2018-11-22 12:30] [ALPM] upgraded libffi (3.2.1-2 -> 3.2.1-3)
[2018-11-22 12:30] [ALPM] upgraded libcroco (0.6.12+4+g9ad7287-1 -> 0.6.12+4+g9ad7287-2)
[2018-11-22 12:30] [ALPM] upgraded zstd (1.3.6-1 -> 1.3.7-1)
[2018-11-22 12:30] [ALPM] upgraded libjpeg-turbo (2.0.0-1 -> 2.0.1-1)
[2018-11-22 12:30] [ALPM] upgraded libtiff (4.0.9-2 -> 4.0.10-1)
[2018-11-22 12:30] [ALPM] upgraded harfbuzz (2.1.0-1 -> 2.1.3-1)
[2018-11-22 12:30] [ALPM] upgraded lzo (2.10-1 -> 2.10-2)
[2018-11-22 12:30] [ALPM] upgraded libxrender (0.9.10-1 -> 0.9.10-2)
[2018-11-22 12:30] [ALPM] upgraded pixman (0.34.0-1 -> 0.34.0-2)
[2018-11-22 12:30] [ALPM] upgraded librsvg (2:2.44.8-1 -> 2:2.44.9-1)
[2018-11-22 12:30] [ALPM] upgraded adwaita-icon-theme (3.30.0-1 -> 3.30.1-1)
[2018-11-22 12:30] [ALPM] upgraded alsa-lib (1.1.7-1 -> 1.1.7-2)
[2018-11-22 12:30] [ALPM] upgraded xorg-xrandr (1.5.0-1 -> 1.5.0-2)
[2018-11-22 12:30] [ALPM] upgraded sqlite (3.25.2-1 -> 3.25.3-1)
[2018-11-22 12:30] [ALPM] upgraded gdbm (1.18-1 -> 1.18.1-1)
[2018-11-22 12:30] [ALPM] upgraded keyutils (1.5.11-1 -> 1.6-1)
[2018-11-22 12:30] [ALPM] upgraded python2-cairo (1.17.0-2 -> 1.18.0-1)
[2018-11-22 12:30] [ALPM] upgraded gmp (6.1.2-1 -> 6.1.2-2)
[2018-11-22 12:30] [ALPM] upgraded libcups (2.2.8-3 -> 2.2.9-1)
[2018-11-22 12:30] [ALPM] upgraded libxi (1.7.9-1 -> 1.7.9-2)
[2018-11-22 12:30] [ALPM] upgraded arandr (0.1.9-2 -> 0.1.9-3)
[2018-11-22 12:30] [ALPM] upgraded archlinux-keyring (20181031-1 -> 20181113-1)
[2018-11-22 12:30] [ALPM-SCRIPTLET] ==> Appending keys from archlinux.gpg...
[2018-11-22 12:30] [ALPM-SCRIPTLET] ==> Locally signing trusted keys in keyring...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Locally signing key DDB867B92AA789C165EEFA799B729B06A680C281...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Locally signing key 684148BB25B49E986A4944C55184252D824B18E8...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Locally signing key 91FFE0700E80619CEB73235CA88E23E377514E00...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Locally signing key AB19265E5D7D20687D303246BA1DFB64FFF979E7...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Locally signing key 0E8B644079F599DFC1DDC3973348882F6AC6A4C2...
[2018-11-22 12:30] [ALPM-SCRIPTLET] ==> Importing owner trust values...
[2018-11-22 12:30] [ALPM-SCRIPTLET] ==> Disabling revoked keys in keyring...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key 7FA647CD89891DEDC060287BB9113D1ED21E1A55...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key D4DE5ABDE2A7287644EAC7E36D1A9E70E19DAA50...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key 40440DC037C05620984379A6761FAD69BA06C6A9...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key B1F2C889CB2CCB2ADA36D963097D629E437520BD...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key 5357F3B111688D88C1D88119FCF2CB179205AC90...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key 5559BC1A32B8F76B3FCCD9555FA5E5544F010D48...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key BC1FBE4D2826A0B51E47ED62E2539214C6C11350...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key 63F395DE2D6398BBE458F281F2DBB4931985A992...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key 8F76BEEA0289F9E1D3E229C05F946DED983D4366...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key 4FCF887689C41B09506BE8D5F3E1D5C5D30DB0AD...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key FB871F0131FEA4FB5A9192B4C8880A6406361833...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key 81D7F8241DB38BC759C80FCE3A726C6170E80477...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key 5E7585ADFF106BFFBBA319DC654B877A0864983E...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key 50F33E2E5B0C3D900424ABE89BDCF497A4BBCC7F...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key E7210A59715F6940CF9A4E36A001876699AD6E84...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key 65EEFE022108E2B708CBFCF7F9E712E59AF5F22A...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key F5A361A3A13554B85E57DDDAAF7EF7873CFD4BB6...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key 40776A5221EF5AD468A4906D42A1DB15EC133BAD...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key 8CF934E339CAD8ABF342E822E711306E3C4F88BC...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key 5696C003B0854206450C8E5BE613C09CB4440678...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key 5A2257D19FF7E1E0E415968CE62F853100F0D0F0...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key 9515D8A8EAB88E49BB65EDBCE6B456CAF15447D5...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key 4A8B17E20B88ACA61860009B5CED81B7C2E5C0D2...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key 0B20CA1931F5DA3A70D0F8D2EA6836E1AB441196...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key 34C5D94FE7E7913E86DC427E7FB1A3800C84C0A5...
[2018-11-22 12:30] [ALPM-SCRIPTLET]   -> Disabling key 39F880E50E49A4D11341E8F939E4F17F295AFBF4...
[2018-11-22 12:31] [ALPM-SCRIPTLET]   -> Disabling key 66BD74A036D522F51DD70A3C7F2A16726521E06D...
[2018-11-22 12:31] [ALPM-SCRIPTLET]   -> Disabling key 07DFD3A0BC213FA12EDC217559B3122E2FA915EC...
[2018-11-22 12:31] [ALPM-SCRIPTLET]   -> Disabling key 44D4A033AC140143927397D47EFD567D4C7EA887...
[2018-11-22 12:31] [ALPM-SCRIPTLET]   -> Disabling key 27FFC4769E19F096D41D9265A04F9397CDFD6BB0...
[2018-11-22 12:31] [ALPM-SCRIPTLET]   -> Disabling key 8840BD07FC24CB7CE394A07CCF7037A4F27FB7DA...
[2018-11-22 12:31] [ALPM-SCRIPTLET] ==> Updating trust database...
[2018-11-22 12:31] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2019-03-29
[2018-11-22 12:31] [ALPM] upgraded arduino-ctags (5.8_arduino11-2 -> 5.8_arduino11-3)
[2018-11-22 12:31] [ALPM] upgraded cracklib (2.9.6-1 -> 2.9.6-3)
[2018-11-22 12:31] [ALPM] upgraded kbd (2.0.4-1 -> 2.0.4-2)
[2018-11-22 12:31] [ALPM] upgraded util-linux (2.32.1-2 -> 2.33-2)
[2018-11-22 12:31] [ALPM] upgraded popt (1.16-9 -> 1.16-10)
[2018-11-22 12:31] [ALPM] upgraded libmnl (1.0.4-1 -> 1.0.4-2)
[2018-11-22 12:31] [ALPM] upgraded systemd (239.2-1 -> 239.300-2)
[2018-11-22 12:31] [ALPM] upgraded libwacom (0.31-1 -> 0.32-1)
[2018-11-22 12:31] [ALPM] upgraded libinput (1.12.2-1 -> 1.12.3-1)
[2018-11-22 12:31] [ALPM] upgraded libunwind (1.2.1-1 -> 1.2.1-2)
[2018-11-22 12:31] [ALPM] upgraded nvidia-utils (410.66-1 -> 410.78-1)
[2018-11-22 12:31] [ALPM-SCRIPTLET] If you run into trouble with CUDA not being available, run nvidia-modprobe first.
[2018-11-22 12:31] [ALPM] upgraded attica (5.51.0-1 -> 5.52.0-1)
[2018-11-22 12:31] [ALPM] upgraded m4 (1.4.18-1 -> 1.4.18-2)
[2018-11-22 12:31] [ALPM] upgraded diffutils (3.6-1 -> 3.6-2)
[2018-11-22 12:31] [ALPM] upgraded autoconf (2.69-4 -> 2.69-5)
[2018-11-22 12:31] [ALPM] upgraded babl (0.1.58-1 -> 0.1.60-1)
[2018-11-22 12:32] [ALPM] upgraded linux-firmware (20181018.d877533-1 -> 20181026.1cb4e51-1)
[2018-11-22 12:32] [ALPM] upgraded findutils (4.6.0-2 -> 4.6.0-4)
[2018-11-22 12:32] [ALPM] upgraded grep (3.1-1 -> 3.1-2)
[2018-11-22 12:32] [ALPM] upgraded gzip (1.9-1 -> 1.9-2)
[2018-11-22 12:33] [ALPM] upgraded linux (4.18.16.arch1-1 -> 4.19.2.arch1-1)
[2018-11-22 12:33] [ALPM] upgraded bbswitch (0.8-174 -> 0.8-177)
[2018-11-22 12:33] [ALPM] upgraded bc (1.07.1-1 -> 1.07.1-2)
[2018-11-22 12:33] [ALPM] upgraded perl-io-string (1.08-10 -> 1.08-11)
[2018-11-22 12:33] [ALPM] upgraded perl-math-round (0.07-2 -> 0.07-3)
[2018-11-22 12:33] [ALPM] upgraded perl-class-singleton (1.5-2 -> 1.5-3)
[2018-11-22 12:33] [ALPM] upgraded perl-class-data-inheritable (0.08-7 -> 0.08-8)
[2018-11-22 12:33] [ALPM] upgraded perl-class-factory-util (1.7-8 -> 1.7-9)
[2018-11-22 12:33] [ALPM] upgraded ca-certificates-utils (20180821-1 -> 20181109-1)
[2018-11-22 12:33] [ALPM] upgraded ca-certificates-mozilla (3.40-1 -> 3.40-2)
[2018-11-22 12:33] [ALPM] upgraded ca-certificates (20180821-1 -> 20181109-1)
[2018-11-22 12:33] [ALPM] upgraded perl-xml-namespacesupport (1.12-2 -> 1.12-3)
[2018-11-22 12:33] [ALPM] upgraded perl-xml-sax-base (1.09-2 -> 1.09-3)
[2018-11-22 12:33] [ALPM] upgraded biber (2.11-2 -> 1:2.11-1)
[2018-11-22 12:33] [ALPM] upgraded bison (3.1-1 -> 3.2-1)
[2018-11-22 12:33] [ALPM] upgraded btrfs-progs (4.17.1-1 -> 4.19-1)
[2018-11-22 12:33] [ALPM] upgraded cairomm (1.12.2-2 -> 1.12.2-3)
[2018-11-22 12:33] [ALPM] upgraded python2-psutil (5.4.7-1 -> 5.4.8-1)
[2018-11-22 12:33] [ALPM] upgraded python2-regex (2018.11.03-1 -> 2018.11.07-1)
[2018-11-22 12:33] [ALPM] upgraded python2-pyparsing (2.2.2-1 -> 2.3.0-1)
[2018-11-22 12:33] [ALPM] upgraded python2-setuptools (1:40.5.0-1 -> 1:40.6.2-1)
[2018-11-22 12:33] [ALPM] upgraded python2-enum34 (1.1.6-1 -> 1.1.6-2)
[2018-11-22 12:33] [ALPM] upgraded giflib (5.1.4-1 -> 5.1.4-2)
[2018-11-22 12:33] [ALPM] upgraded libwebp (1.0.0-1 -> 1.0.1-1)
[2018-11-22 12:33] [ALPM] upgraded libxv (1.0.11-1 -> 1.0.11-2)
[2018-11-22 12:33] [ALPM] upgraded iso-codes (3.79-1 -> 4.1-1)
[2018-11-22 12:34] [ALPM] upgraded dosfstools (4.1-1 -> 4.1-2)
[2018-11-22 12:34] [ALPM] upgraded mdadm (4.0-1 -> 4.0-2)
[2018-11-22 12:34] [ALPM] upgraded libaio (0.3.111-1 -> 0.3.111-2)
[2018-11-22 12:34] [ALPM] upgraded nss (3.40-1 -> 3.40-2)
[2018-11-22 12:34] [ALPM] upgraded gnupg (2.2.10-1 -> 2.2.11-1)
[2018-11-22 12:34] [ALPM] upgraded calibre (3.33.1-2 -> 3.34.0-1)
[2018-11-22 12:34] [ALPM] upgraded tar (1.30-1 -> 1.30-2)
[2018-11-22 12:34] [ALPM] upgraded libcanberra (0.30+2+gc0620e4-1 -> 0.30+2+gc0620e4-2)
[2018-11-22 12:34] [ALPM] upgraded wayland-protocols (1.16-1 -> 1.17-1)
[2018-11-22 12:34] [ALPM] upgraded libxtst (1.2.3-1 -> 1.2.3-2)
[2018-11-22 12:34] [ALPM] upgraded libasyncns (0.8+3+g68cd5af-1 -> 0.8+3+g68cd5af-2)
[2018-11-22 12:34] [ALPM] upgraded flac (1.3.2-1 -> 1.3.2-2)
[2018-11-22 12:34] [ALPM] upgraded libsndfile (1.0.28-1 -> 1.0.28-2)
[2018-11-22 12:34] [ALPM] upgraded cinnamon-desktop (4.0.0-1 -> 4.0.1-1)
[2018-11-22 12:34] [ALPM] upgraded python-cairo (1.17.0-2 -> 1.18.0-1)
[2018-11-22 12:34] [ALPM] upgraded gobject-introspection-runtime (1.58.0+8+gfdaa3b1a-1 -> 1.58.1-1)
[2018-11-22 12:34] [ALPM] upgraded pygobject-devel (3.30.1-3 -> 3.30.2-1)
[2018-11-22 12:34] [ALPM] upgraded python-gobject (3.30.1-3 -> 3.30.2-1)
[2018-11-22 12:34] [ALPM] upgraded xapps (1.4.0-1 -> 1.4.2-1)
[2018-11-22 12:34] [ALPM] upgraded python-psutil (5.4.7-1 -> 5.4.8-1)
[2018-11-22 12:34] [ALPM] upgraded cinnamon-screensaver (4.0.0-1 -> 4.0.1-1)
[2018-11-22 12:34] [ALPM] upgraded libcanberra-pulse (0.30+2+gc0620e4-1 -> 0.30+2+gc0620e4-2)
[2018-11-22 12:34] [ALPM] upgraded libnotify (0.7.7-1 -> 0.7.7-2)
[2018-11-22 12:34] [ALPM] upgraded libusbmuxd (1.0.10+13+gc724e70-1 -> 1.0.10+29+g9db5747-1)
[2018-11-22 12:34] [ALPM] upgraded usbmuxd (1.1.0+28+g46bdf3e-1 -> 1.1.0+48+g1cc8b34-2)
[2018-11-22 12:34] [ALPM] upgraded libimobiledevice (1.2.0+66+g5a85432-2 -> 1.2.0+87+g92c5462-1)
[2018-11-22 12:34] [ALPM] upgraded cinnamon-settings-daemon (4.0.0-1 -> 4.0.2-1)
[2018-11-22 12:34] [ALPM] upgraded libkeybinder3 (0.3.2-1 -> 0.3.2-2)
[2018-11-22 12:34] [ALPM] upgraded startup-notification (0.12-5 -> 0.12-6)
[2018-11-22 12:34] [ALPM] upgraded hunspell (1.6.2-1 -> 1.7.0-1)
[2018-11-22 12:34] [ALPM] upgraded enchant (2.2.3-1 -> 2.2.3-2)
[2018-11-22 12:34] [ALPM] upgraded harfbuzz-icu (2.1.0-1 -> 2.1.3-1)
[2018-11-22 12:34] [ALPM] upgraded muffin (4.0.0-1 -> 4.0.2-1)
[2018-11-22 12:34] [ALPM] upgraded nemo (4.0.0-1 -> 4.0.2-1)
[2018-11-22 12:34] [ALPM] upgraded cogl (1.22.2+10+g3baa2d7a-1 -> 1.22.2+22+ge023a361-1)
[2018-11-22 12:34] [ALPM] upgraded clutter (1.26.2-1 -> 1.26.2-2)
[2018-11-22 12:34] [ALPM] upgraded mobile-broadband-provider-info (20170310-1 -> 20170310-2)
[2018-11-22 12:34] [ALPM] upgraded libssh2 (1.8.0-2 -> 1.8.0-3)
[2018-11-22 12:34] [ALPM] upgraded cinnamon (4.0.0-1 -> 4.0.2-1)
[2018-11-22 12:34] [ALPM] upgraded coin-or-coinutils (2.10.14-1 -> 2.10.14-2)
[2018-11-22 12:34] [ALPM] upgraded coin-or-osi (0.107.9-1 -> 0.107.9-2)
[2018-11-22 12:34] [ALPM] upgraded metis (5.1.0.p3-1 -> 5.1.0.p3-2)
[2018-11-22 12:34] [ALPM] upgraded coin-or-clp (1.16.11-1 -> 1.16.11-2)
[2018-11-22 12:34] [ALPM] upgraded coin-or-cgl (0.59.10-1 -> 0.59.10-2)
[2018-11-22 12:34] [ALPM] upgraded coin-or-cbc (2.9.9-1 -> 2.9.9-2)
[2018-11-22 12:34] [ALPM] upgraded coin-or-mp (1.8.3-5 -> 1.8.3-6)
[2018-11-22 12:34] [ALPM] upgraded compface (1.5.2-7 -> 1.5.2-8)
[2018-11-22 12:34] [ALPM] upgraded cpio (2.12-3 -> 2.12-4)
[2018-11-22 12:34] [ALPM] upgraded ctags (5.8-6 -> 1:r20181015+g45968eff-1)
[2018-11-22 12:34] [ALPM] upgraded libpaper (1.1.24-10 -> 1.1.24-11)
[2018-11-22 12:34] [ALPM] upgraded ijs (0.35-1 -> 0.35-2)
[2018-11-22 12:35] [ALPM] upgraded cups (2.2.8-3 -> 2.2.9-1)
[2018-11-22 12:35] [ALPM] upgraded dialog (1:1.3_20180621-1 -> 1:1.3_20181107-1)
[2018-11-22 12:35] [ALPM] upgraded tinyxml2 (6.2.0-1 -> 7.0.1-1)
[2018-11-22 12:35] [ALPM] upgraded encfs (1.9.5-1 -> 1.9.5-2)
[2018-11-22 12:35] [ALPM] upgraded libmodplug (0.8.9.0-1 -> 0.8.9.0-2)
[2018-11-22 12:35] [ALPM] upgraded libraw1394 (2.1.2-1 -> 2.1.2-2)
[2018-11-22 12:35] [ALPM] upgraded opencore-amr (0.1.5-1 -> 0.1.5-2)
[2018-11-22 12:35] [ALPM] upgraded speex (1.2.0-1 -> 1.2.0-2)
[2018-11-22 12:35] [ALPM] upgraded libsamplerate (0.1.9-1 -> 0.1.9-2)
[2018-11-22 12:35] [ALPM] upgraded ffmpeg (1:4.0.3-1 -> 1:4.1-1)
[2018-11-22 12:35] [ALPM] upgraded ttf-bitstream-vera (1.10-11 -> 1.10-12)
[2018-11-22 12:35] [ALPM] upgraded ttf-droid (20121017-5 -> 20121017-6)
[2018-11-22 12:35] [ALPM] upgraded ttf-liberation (2.00.1-7 -> 2.00.1-8)
[2018-11-22 12:35] [ALPM] upgraded ttf-ubuntu-font-family (0.83-3 -> 0.83-4)
[2018-11-22 13:26] [PACMAN] Running 'pacman -Syu'
[2018-11-22 13:26] [PACMAN] synchronizing package lists
[2018-11-22 13:28] [PACMAN] Running 'pacman -Syu'
[2018-11-22 13:28] [PACMAN] synchronizing package lists
[2018-11-22 13:32] [PACMAN] Running 'pacman -Syyu'
[2018-11-22 13:32] [PACMAN] synchronizing package lists
[2018-11-22 13:32] [PACMAN] starting full system upgrade
[2018-11-22 13:34] [PACMAN] Running 'pacman -Syyu'
[2018-11-22 13:34] [PACMAN] synchronizing package lists
[2018-11-22 13:34] [PACMAN] starting full system upgrade
[2018-11-22 13:35] [ALPM] running 'ghc-unregister.hook'...
[2018-11-22 13:35] [ALPM] transaction started
[2018-11-22 13:35] [ALPM-SCRIPTLET] ghc-pkg: cannot find package nats-1.1.2
[2018-11-22 13:35] [ALPM-SCRIPTLET] ghc-pkg: cannot find package semigroups-0.18.4
[2018-11-22 13:35] [ALPM] upgraded ghc-libs (8.6.1-1 -> 8.6.2-1)
[2018-11-22 13:35] [ALPM-SCRIPTLET] ==> If you have custom packages installed, you will need to reinstall them now.
[2018-11-22 13:35] [ALPM-SCRIPTLET] ==> See /usr/lib/ghc-8.6.1/package.conf.d/ for a tentative list of affected packages.
[2018-11-22 13:35] [ALPM] upgraded ghc (8.6.1-1 -> 8.6.2-1)
[2018-11-22 13:35] [ALPM] upgraded ghostscript (9.25-4 -> 9.26-1)
[2018-11-22 13:35] [ALPM] upgraded libxpm (3.5.12-1 -> 3.5.12-2)
[2018-11-22 13:35] [ALPM] upgraded gimp (2.10.6-2 -> 2.10.8-1)
[2018-11-22 13:35] [ALPM] upgraded glib-perl (1.326-2 -> 1.328-1)
[2018-11-22 13:35] [ALPM] upgraded which (2.21-2 -> 2.21-3)
[2018-11-22 13:35] [ALPM] upgraded glusterfs (1:5.0-2 -> 1:5.1-1)
[2018-11-22 13:35] [ALPM-SCRIPTLET] -- Read https://gluster.readthedocs.io/en/latest/Upgrade-Guide/ page!
[2018-11-22 13:35] [ALPM] upgraded intltool (0.51.0-3 -> 0.51.0-4)
[2018-11-22 13:35] [ALPM] upgraded python-pyparsing (2.2.2-1 -> 2.3.0-1)
[2018-11-22 13:35] [ALPM] upgraded python-setuptools (1:40.5.0-1 -> 1:40.6.2-1)
[2018-11-22 13:35] [ALPM] upgraded gnome-common (3.18.0-2 -> 3.18.0-3)
[2018-11-22 13:35] [ALPM] upgraded gnome-icon-theme-symbolic (3.12.0-4 -> 3.12.0-5)
[2018-11-22 13:35] [ALPM] upgraded gnome-icon-theme (3.12.0-4 -> 3.12.0-5)
[2018-11-22 13:35] [ALPM] upgraded gnu-netcat (0.7.1-6 -> 0.7.1-7)
[2018-11-22 13:35] [ALPM] upgraded python-markupsafe (1.0-2 -> 1.1.0-1)
[2018-11-22 13:35] [ALPM] upgraded gobject-introspection (1.58.0+8+gfdaa3b1a-1 -> 1.58.1-1)
[2018-11-22 13:35] [ALPM] upgraded gperf (3.1-1 -> 3.1-2)
[2018-11-22 13:35] [ALPM] upgraded gpicview-gtk3 (0.2.5-3 -> 0.2.5-4)
[2018-11-22 13:35] [ALPM] upgraded groff (1.22.3-7 -> 1.22.3-8)
[2018-11-22 13:35] [ALPM] upgraded libofa (0.9.3-7 -> 0.9.3-8)
[2018-11-22 13:35] [ALPM] upgraded rtmpdump (1:2.4.r96.fa8646d-3 -> 1:2.4.r96.fa8646d-4)
[2018-11-22 13:35] [ALPM] upgraded libdc1394 (2.2.5-1 -> 2.2.5-2)
[2018-11-22 13:35] [ALPM] upgraded libmpcdec (1:0.1+r475-1 -> 1:0.1+r475-2)
[2018-11-22 13:35] [ALPM] upgraded sdl (1.2.15-9 -> 1.2.15-10)
[2018-11-22 13:35] [ALPM] upgraded gst-plugins-bad (1.14.4-3 -> 1.14.4-4)
[2018-11-22 13:35] [ALPM] upgraded gtk-engines (2.21.0-3 -> 2.21.0-4)
[2018-11-22 13:36] [ALPM] upgraded gtkmm (2.24.5-2 -> 1:2.24.5-3)
[2018-11-22 13:36] [ALPM] upgraded gtkmm3 (3.22.2+2+g3002ed86-1 -> 3.24.0-1)
[2018-11-22 13:36] [ALPM] upgraded guile2.0 (2.0.14-1 -> 2.0.14-2)
[2018-11-22 13:36] [ALPM] upgraded haskell-hashable (1.2.7.0-4 -> 1.2.7.0-5)
[2018-11-22 13:36] [ALPM] upgraded haskell-integer-logarithms (1.0.2.2-2 -> 1.0.2.2-3)
[2018-11-22 13:36] [ALPM] upgraded haskell-primitive (0.6.4.0-2 -> 0.6.4.0-3)
[2018-11-22 13:36] [ALPM] upgraded haskell-scientific (0.3.6.2-8 -> 0.3.6.2-9)
[2018-11-22 13:36] [ALPM] upgraded haskell-attoparsec (0.13.2.2-32 -> 0.13.2.2-33)
[2018-11-22 13:36] [ALPM] upgraded haskell-base-compat (0.10.5-1 -> 0.10.5-2)
[2018-11-22 13:36] [ALPM] upgraded haskell-dlist (0.8.0.5-2 -> 0.8.0.5-3)
[2018-11-22 13:36] [ALPM] upgraded haskell-tagged (0.8.6-2 -> 0.8.6-3)
[2018-11-22 13:36] [ALPM] upgraded haskell-th-abstraction (0.2.8.0-2 -> 0.2.8.0-3)
[2018-11-22 13:36] [ALPM] upgraded haskell-time-locale-compat (0.1.1.5-2 -> 0.1.1.5-3)
[2018-11-22 13:36] [ALPM] upgraded haskell-unordered-containers (0.2.9.0-13 -> 0.2.9.0-14)
[2018-11-22 13:36] [ALPM] upgraded haskell-random (1.1-13 -> 1.1-14)
[2018-11-22 13:36] [ALPM] upgraded haskell-uuid-types (1.0.3-16 -> 1.0.3-17)
[2018-11-22 13:36] [ALPM] upgraded haskell-vector (0.12.0.1-11 -> 0.12.0.1-12)
[2018-11-22 13:36] [ALPM] upgraded haskell-aeson (1.4.1.0-7 -> 1.4.1.0-8)
[2018-11-22 13:36] [ALPM] upgraded haskell-cmdargs (0.10.20-4 -> 0.10.20-5)
[2018-11-22 13:36] [ALPM] upgraded haskell-aeson-pretty (0.8.7-42 -> 0.8.7-43)
[2018-11-22 13:36] [ALPM] upgraded haskell-colour (2.3.4-12 -> 2.3.4-13)
[2018-11-22 13:36] [ALPM] upgraded haskell-ansi-terminal (0.8.2-1 -> 0.8.2-2)
[2018-11-22 13:36] [ALPM] upgraded haskell-hourglass (0.2.12-7 -> 0.2.12-8)
[2018-11-22 13:36] [ALPM] upgraded haskell-basement (0.0.8-2 -> 0.0.8-3)
[2018-11-22 13:36] [ALPM] upgraded haskell-memory (0.14.18-6 -> 0.14.18-8)
[2018-11-22 13:36] [ALPM] upgraded haskell-asn1-types (0.3.2-80 -> 0.3.2-82)
[2018-11-22 13:36] [ALPM] upgraded haskell-asn1-encoding (0.9.5-73 -> 0.9.5-75)
[2018-11-22 13:36] [ALPM] upgraded haskell-asn1-parse (0.9.4-84 -> 0.9.4-86)
[2018-11-22 13:36] [ALPM] upgraded haskell-async (2.2.1-3 -> 2.2.1-4)
[2018-11-22 13:36] [ALPM] upgraded haskell-base-orphans (0.8-13 -> 0.8-14)
[2018-11-22 13:36] [ALPM] upgraded haskell-base64-bytestring (1.0.0.1-13 -> 1.0.0.1-14)
[2018-11-22 13:36] [ALPM] upgraded haskell-blaze-builder (0.4.1.0-4 -> 0.4.1.0-5)
[2018-11-22 13:36] [ALPM] upgraded haskell-blaze-markup (0.8.2.2-5 -> 0.8.2.2-6)
[2018-11-22 13:36] [ALPM] upgraded haskell-blaze-html (0.9.1.1-11 -> 0.9.1.1-12)
[2018-11-22 13:36] [ALPM] upgraded haskell-byteable (0.1.1-10 -> 0.1.1-11)
[2018-11-22 13:36] [ALPM] upgraded haskell-case-insensitive (1.2.0.11-4 -> 1.2.0.11-5)
[2018-11-22 13:36] [ALPM] upgraded haskell-cereal (0.5.7.0-2 -> 0.5.7.0-3)
[2018-11-22 13:36] [ALPM] upgraded haskell-cmark-gfm (0.1.5-3 -> 0.1.5-4)
[2018-11-22 13:36] [ALPM] upgraded haskell-transformers-compat (0.6.2-3 -> 0.6.2-4)
[2018-11-22 13:36] [ALPM] upgraded haskell-exceptions (0.10.0-8 -> 0.10.0-9)
[2018-11-22 13:36] [ALPM] upgraded haskell-split (0.2.3.3-6 -> 0.2.3.3-7)
[2018-11-22 13:36] [ALPM] upgraded haskell-vector-algorithms (0.8.0.1-2 -> 0.8.0.1-3)
[2018-11-22 13:36] [ALPM] upgraded haskell-mono-traversable (1.0.9.0-20 -> 1.0.9.0-23)
[2018-11-22 13:36] [ALPM] upgraded haskell-unliftio-core (0.1.2.0-2 -> 0.1.2.0-3)
[2018-11-22 13:36] [ALPM] upgraded haskell-resourcet (1.2.2-5 -> 1.2.2-6)
[2018-11-22 13:36] [ALPM] upgraded haskell-conduit (1.3.1-7 -> 1.3.1-10)
[2018-11-22 13:36] [ALPM] upgraded haskell-data-default-class (0.1.2.0-9 -> 0.1.2.0-10)
[2018-11-22 13:36] [ALPM] upgraded haskell-network (2.7.0.2-14 -> 2.7.0.2-16)
[2018-11-22 13:36] [ALPM] upgraded haskell-socks (0.5.6-40 -> 0.5.6-42)
[2018-11-22 13:36] [ALPM] upgraded haskell-cryptonite (0.25-26 -> 0.25-28)
[2018-11-22 13:36] [ALPM] upgraded haskell-pem (0.2.4-32 -> 0.2.4-34)
[2018-11-22 13:36] [ALPM] upgraded haskell-x509 (1.7.5-1 -> 1.7.5-3)
[2018-11-22 13:36] [ALPM] upgraded haskell-x509-store (1.6.6-38 -> 1.6.7-2)
[2018-11-22 13:36] [ALPM] upgraded haskell-x509-validation (1.6.10-38 -> 1.6.11-2)
[2018-11-22 13:36] [ALPM] upgraded haskell-tls (1.4.1-48 -> 1.4.1-52)
[2018-11-22 13:36] [ALPM] upgraded haskell-x509-system (1.6.6-67 -> 1.6.6-70)
[2018-11-22 13:36] [ALPM] upgraded haskell-connection (0.2.8-103 -> 0.2.8-107)
[2018-11-22 13:36] [ALPM] upgraded haskell-cookie (0.4.4-4 -> 0.4.4-5)
[2018-11-22 13:36] [ALPM] upgraded haskell-data-default-instances-containers (0.0.1-21 -> 0.0.1-22)
[2018-11-22 13:36] [ALPM] upgraded haskell-data-default-instances-dlist (0.0.1-29 -> 0.0.1-30)
[2018-11-22 13:36] [ALPM] upgraded haskell-old-locale (1.0.0.7-15 -> 1.0.0.7-16)
[2018-11-22 13:36] [ALPM] upgraded haskell-data-default-instances-old-locale (0.0.1-21 -> 0.0.1-22)
[2018-11-22 13:36] [ALPM] upgraded haskell-data-default (0.7.1.1-16 -> 0.7.1.1-17)
[2018-11-22 13:36] [ALPM] upgraded haskell-digest (0.0.1.2-10 -> 0.0.1.2-11)
[2018-11-22 13:36] [ALPM] upgraded haskell-doctemplates (0.2.2.1-47 -> 0.2.2.1-48)
[2018-11-22 13:36] [ALPM] upgraded haskell-foundation (0.0.21-14 -> 0.0.21-16)
[2018-11-22 13:36] [ALPM] upgraded haskell-glob (0.9.3-3 -> 0.9.3-4)
[2018-11-22 13:36] [ALPM] upgraded haskell-haddock-library (1.6.0-22 -> 1.7.0-2)
[2018-11-22 13:36] [ALPM] upgraded haskell-hslua (1.0.1-6 -> 1.0.1-7)
[2018-11-22 13:36] [ALPM] upgraded haskell-hslua-module-text (0.2.0-7 -> 0.2.0-8)
[2018-11-22 13:36] [ALPM] upgraded haskell-hsyaml (0.1.1.2-3 -> 0.1.1.2-4)
[2018-11-22 13:36] [ALPM] upgraded haskell-network-uri (2.6.1.0-14 -> 2.6.1.0-15)
[2018-11-22 13:36] [ALPM] upgraded haskell-http (4000.3.12-78 -> 4000.3.12-84)
[2018-11-22 13:36] [ALPM] upgraded haskell-http-types (0.12.2-7 -> 0.12.2-9)
[2018-11-22 13:36] [ALPM] upgraded haskell-mime-types (0.1.0.8-2 -> 0.1.0.8-3)
[2018-11-22 13:36] [ALPM] upgraded haskell-zlib (0.6.2-4 -> 0.6.2-5)
[2018-11-22 13:36] [ALPM] upgraded haskell-streaming-commons (0.2.1.0-12 -> 0.2.1.0-14)
[2018-11-22 13:36] [ALPM] upgraded haskell-http-client (0.5.13.1-25 -> 0.5.14-1)
[2018-11-22 13:36] [ALPM] upgraded haskell-http-client-tls (0.3.5.3-82 -> 0.3.5.3-87)
[2018-11-22 13:36] [ALPM] upgraded haskell-hxt-charproperties (9.2.0.1-8 -> 9.2.0.1-9)
[2018-11-22 13:36] [ALPM] upgraded haskell-hxt-regex-xmlschema (9.2.0.3-12 -> 9.2.0.3-13)
[2018-11-22 13:36] [ALPM] upgraded haskell-hxt-unicode (9.0.2.4-8 -> 9.0.2.4-9)
[2018-11-22 13:36] [ALPM] upgraded haskell-hxt (9.3.1.16-12 -> 9.3.1.16-13)
[2018-11-22 13:36] [ALPM] upgraded haskell-juicypixels (3.3.2-2 -> 3.3.2-3)
[2018-11-22 13:36] [ALPM] upgraded haskell-lexer (1.0.2-2 -> 1.0.2-3)
[2018-11-22 13:36] [ALPM] upgraded haskell-libyaml (0.1.0.0-3 -> 0.1.0.0-6)
[2018-11-22 13:36] [ALPM] upgraded haskell-transformers-base (0.4.5.2-21 -> 0.4.5.2-22)
[2018-11-22 13:36] [ALPM] upgraded haskell-monad-control (1.0.2.3-23 -> 1.0.2.3-24)
[2018-11-22 13:36] [ALPM] upgraded haskell-lifted-base (0.2.3.12-23 -> 0.2.3.12-24)
[2018-11-22 13:36] [ALPM] upgraded haskell-vector-th-unbox (0.2.1.6-13 -> 0.2.1.6-14)
[2018-11-22 13:36] [ALPM] upgraded haskell-math-functions (0.3.0.2-2 -> 0.3.1.0-1)
[2018-11-22 13:36] [ALPM] upgraded haskell-mmorph (1.1.2-5 -> 1.1.2-6)
[2018-11-22 13:36] [ALPM] upgraded haskell-mwc-random (0.14.0.0-4 -> 0.14.0.0-6)
[2018-11-22 13:36] [ALPM] upgraded haskell-old-time (1.1.0.3-15 -> 1.1.0.3-16)
[2018-11-22 13:36] [ALPM] upgraded haskell-tf-random (0.5-20 -> 0.5-21)
[2018-11-22 13:36] [ALPM] upgraded haskell-quickcheck (2.11.3-5 -> 2.11.3-6)
[2018-11-22 13:36] [ALPM] upgraded haskell-syb (0.7-7 -> 0.7-8)
[2018-11-22 13:36] [ALPM] upgraded haskell-pandoc-types (1.17.5.4-2 -> 1.17.5.4-3)
[2018-11-22 13:36] [ALPM] upgraded haskell-pretty-show (1.8.2-3 -> 1.8.2-4)
[2018-11-22 13:36] [ALPM] upgraded haskell-regex-base (0.93.2-34 -> 0.93.2-35)
[2018-11-22 13:36] [ALPM] upgraded haskell-regex-pcre (0.94.4-10 -> 0.94.4-11)
[2018-11-22 13:36] [ALPM] upgraded haskell-safe (0.3.17-3 -> 0.3.17-4)
[2018-11-22 13:36] [ALPM] upgraded haskell-sha (1.6.4.4-4 -> 1.6.4.4-5)
[2018-11-22 13:36] [ALPM] upgraded haskell-utf8-string (1.0.1.1-9 -> 1.0.1.1-10)
[2018-11-22 13:36] [ALPM] upgraded haskell-skylighting-core (0.7.4-5 -> 0.7.4-6)
[2018-11-22 13:36] [ALPM] upgraded haskell-skylighting (0.7.4-5 -> 0.7.4-6)
[2018-11-22 13:36] [ALPM] upgraded haskell-tagsoup (0.14.7-2 -> 0.14.7-3)
[2018-11-22 13:36] [ALPM] upgraded haskell-temporary (1.3-15 -> 1.3-16)
[2018-11-22 13:36] [ALPM] upgraded haskell-xml (1.3.14-15 -> 1.3.14-16)
[2018-11-22 13:36] [ALPM] upgraded haskell-texmath (0.11.1.2-2 -> 0.11.1.2-3)
[2018-11-22 13:36] [ALPM] upgraded haskell-yaml (0.11.0.0-3 -> 0.11.0.0-6)
[2018-11-22 13:36] [ALPM] upgraded haskell-zip-archive (0.3.3-11 -> 0.3.3-12)
[2018-11-22 13:36] [ALPM] upgraded inetutils (1.9.4-5 -> 1.9.4-6)
[2018-11-22 13:36] [ALPM] upgraded python-prompt_toolkit (1.0.15-2 -> 2.0.7-1)
[2018-11-22 13:36] [ALPM] upgraded ipython (6.5.0-2 -> 7.1.1-1)
[2018-11-22 13:36] [ALPM] upgraded python-ipywidgets (7.2.1-2 -> 7.4.2-1)
[2018-11-22 13:36] [ALPM] upgraded jupyter_console (5.2.0-2 -> 6.0.0-1)
[2018-11-22 13:36] [ALPM] upgraded jupyter (4.1.0-6 -> 4.1.0-7)
[2018-11-22 13:36] [ALPM] upgraded karchive (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kcoreaddons (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kauth (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kdbusaddons (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kconfig (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kwindowsystem (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kcrash (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kglobalaccel (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kwidgetsaddons (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kcompletion (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded ki18n (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kservice (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kcodecs (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kguiaddons (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kconfigwidgets (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kitemviews (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kiconthemes (5.51.0-2 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded sonnet (5.51.0-1 -> 5.52.0-2)
[2018-11-22 13:36] [ALPM] upgraded ktextwidgets (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kxmlgui (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kbookmarks (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded media-player-info (23-1 -> 24-1)
[2018-11-22 13:36] [ALPM] upgraded solid (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kjobwidgets (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded libdbusmenu-qt5 (0.9.3+16.04.20160218-1 -> 0.9.3+16.04.20160218-2)
[2018-11-22 13:36] [ALPM] upgraded knotifications (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kwallet (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kio (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded kcachegrind-common (18.08.2-1 -> 18.08.3-1)
[2018-11-22 13:36] [ALPM] upgraded kcachegrind (18.08.2-1 -> 18.08.3-1)
[2018-11-22 13:36] [ALPM] upgraded kinit (5.51.0-1 -> 5.52.0-1)
[2018-11-22 13:36] [ALPM] upgraded ldb (1:1.3.6-1 -> 1:1.4.3-1)
[2018-11-22 13:36] [ALPM] upgraded lib32-flac (1.3.2-1 -> 1.3.2-2)
[2018-11-22 13:36] [ALPM] upgraded lib32-gettext (0.19.8.1-1 -> 0.19.8.1-2)
[2018-11-22 13:36] [ALPM] upgraded lib32-gmp (6.1.2-1 -> 6.1.2-2)
[2018-11-22 13:36] [ALPM] upgraded lib32-zlib (1.2.11-1 -> 1.2.11-2)
[2018-11-22 13:36] [ALPM] upgraded lib32-util-linux (2.32.1-1 -> 2.33-1)
[2018-11-22 13:36] [ALPM] upgraded lib32-harfbuzz (2.1.0-1 -> 2.1.3-1)
[2018-11-22 13:36] [ALPM] upgraded lib32-keyutils (1.5.11-1 -> 1.6-1)
[2018-11-22 13:36] [ALPM] upgraded lib32-libasyncns (0.8+3+g68cd5af-1 -> 0.8+3+g68cd5af-2)
[2018-11-22 13:36] [ALPM] upgraded lib32-libcap (2.25-1 -> 2.25-2)
[2018-11-22 13:36] [ALPM] installed lib32-lz4 (1.8.3-1)
[2018-11-22 13:36] [ALPM] installed lib32-zstd (1.3.7-1)
[2018-11-22 13:36] [ALPM] upgraded lib32-libtiff (4.0.9-1 -> 4.0.10-1)
[2018-11-22 13:36] [ALPM] upgraded lib32-systemd (239.2-1 -> 239.300-1)
[2018-11-22 13:36] [ALPM] upgraded lib32-libcups (2.2.7-1 -> 2.2.9-1)
[2018-11-22 13:36] [ALPM] upgraded lib32-libraw1394 (2.1.2-1 -> 2.1.2-2)
[2018-11-22 13:36] [ALPM] upgraded lib32-libsndfile (1.0.28-1 -> 1.0.28-2)
[2018-11-22 13:36] [ALPM] upgraded lib32-libssh2 (1.8.0-2 -> 1.8.0-3)
[2018-11-22 13:36] [ALPM] upgraded lib32-libthai (0.1.27-1 -> 0.1.28-1)
[2018-11-22 13:36] [ALPM] upgraded lib32-libxfixes (5.0.3-1 -> 5.0.3-2)
[2018-11-22 13:36] [ALPM] upgraded lib32-libxi (1.7.9-1 -> 1.7.9-2)
[2018-11-22 13:36] [ALPM] upgraded lib32-libxrender (0.9.10-1 -> 0.9.10-2)
[2018-11-22 13:36] [ALPM] upgraded lib32-libxrandr (1.5.1-1 -> 1.5.1-2)
[2018-11-22 13:36] [ALPM] upgraded lib32-libxtst (1.2.3-1 -> 1.2.3-2)
[2018-11-22 13:36] [ALPM] upgraded lib32-libxv (1.0.11-1 -> 1.0.11-2)
[2018-11-22 13:36] [ALPM] upgraded lib32-lm_sensors (3.4.0-1 -> 3.4.0-2)
[2018-11-22 13:36] [ALPM] upgraded lib32-nvidia-utils (410.66-1 -> 410.78-1)
[2018-11-22 13:36] [ALPM] upgraded lib32-pixman (0.34.0-1 -> 0.34.0-2)
[2018-11-22 13:36] [ALPM] upgraded libcaca (0.99.beta19-1 -> 0.99.beta19-2)
[2018-11-22 13:36] [ALPM] upgraded libcdaudio (0.99.12.p2-1 -> 0.99.12.p2-2)
[2018-11-22 13:36] [ALPM] upgraded libdbusmenu-qt4 (0.9.3+16.04.20160218-1 -> 0.9.3+16.04.20160218-2)
[2018-11-22 13:36] [ALPM] upgraded libevent (2.1.8-1 -> 2.1.8-2)
[2018-11-22 13:36] [ALPM] upgraded libgsystem (2015.2+4+gd606bec-1 -> 2015.2+4+gd606bec-2)
[2018-11-22 13:36] [ALPM] upgraded libidl2 (0.8.14-4 -> 0.8.14-5)
[2018-11-22 13:36] [ALPM] upgraded libirman (0.5.2-1 -> 0.5.2-2)
[2018-11-22 13:36] [ALPM] upgraded liblangtag (0.6.2-1 -> 0.6.2-2)
[2018-11-22 13:36] [ALPM] upgraded libmariadbclient (10.1.36-1 -> 10.1.37-1)
[2018-11-22 13:36] [ALPM] upgraded libmpd (11.8.17-3 -> 11.8.17-4)
[2018-11-22 13:36] [ALPM] upgraded liboauth (1.0.3+9+g11e9461-2 -> 1.0.3+9+g11e9461-3)
[2018-11-22 13:36] [ALPM] installed spirv-tools (2018.5-1)
[2018-11-22 13:36] [ALPM] installed glslang (7.9.2888-2)
[2018-11-22 13:36] [ALPM] installed shaderc (2018.0-2)
[2018-11-22 13:36] [ALPM] upgraded libplacebo (0.5.0-1 -> 0.6.0-1)
[2018-11-22 13:36] [ALPM] upgraded redland (1:1.0.17-4 -> 1:1.0.17-6)
[2018-11-22 13:36] [ALPM] upgraded lpsolve (5.5.2.5-2 -> 5.5.2.5-3)
[2018-11-22 13:37] [ALPM] upgraded libreoffice-fresh (6.1.3-1 -> 6.1.3-2)
[2018-11-22 13:37] [ALPM] upgraded libshout (1:2.4.1-3 -> 1:2.4.1-4)
[2018-11-22 13:37] [ALPM] upgraded libsidplay (1.36.59-8 -> 1.36.59-9)
[2018-11-22 13:37] [ALPM] upgraded libspectre (0.2.8-1 -> 0.2.8-2)
[2018-11-22 13:37] [ALPM] upgraded libuv (1.23.2-1 -> 1.24.0-1)
[2018-11-22 13:37] [ALPM] upgraded libwbclient (4.8.5-1 -> 4.9.2-1)
[2018-11-22 13:37] [ALPM] upgraded libxnvctrl (410.66-1 -> 410.78-1)
[2018-11-22 13:37] [ALPM] upgraded libxvmc (1.0.10-1 -> 1.0.10-2)
[2018-11-22 13:37] [ALPM] upgraded licenses (20171006-1 -> 20181104-1)
[2018-11-22 13:37] [ALPM] upgraded linux-headers (4.18.16.arch1-1 -> 4.19.2.arch1-1)
[2018-11-22 13:37] [ALPM] upgraded lxappearance-gtk3 (0.6.3-1 -> 0.6.3-2)
[2018-11-22 13:37] [ALPM] upgraded lxappearance-obconf-gtk3 (0.2.3-1 -> 0.2.3-2)
[2018-11-22 13:37] [ALPM] upgraded lxde-common (0.99.2-1 -> 0.99.2-2)
[2018-11-22 13:37] [ALPM] upgraded lxde-icon-theme (0.5.1-3 -> 0.5.1-4)
[2018-11-22 13:37] [ALPM] upgraded lxhotkey-gtk3 (0.1.0-1 -> 0.1.0-2)
[2018-11-22 13:37] [ALPM] upgraded lxinput-gtk3 (0.3.5-1 -> 0.3.5-2)
[2018-11-22 13:37] [ALPM] upgraded lxmenu-data (0.1.5-1 -> 0.1.5-2)
[2018-11-22 13:37] [ALPM] upgraded lxmusic-gtk3 (0.4.7-1 -> 0.4.7-2)
[2018-11-22 13:37] [ALPM] upgraded lxpanel-gtk3 (0.9.3-1 -> 0.9.3-2)
[2018-11-22 13:37] [ALPM] upgraded lxrandr-gtk3 (0.3.1-1 -> 0.3.1-2)
[2018-11-22 13:37] [ALPM] upgraded lxsession-gtk3 (1:0.5.3-1 -> 1:0.5.3-2)
[2018-11-22 13:37] [ALPM] upgraded make (4.2.1-2 -> 4.2.1-3)
[2018-11-22 13:37] [ALPM] upgraded mariadb-clients (10.1.36-1 -> 10.1.37-1)
[2018-11-22 13:37] [ALPM] upgraded mariadb (10.1.36-1 -> 10.1.37-1)
[2018-11-22 13:37] [ALPM] upgraded nano (3.1-1 -> 3.2-1)
[2018-11-22 13:37] [ALPM] upgraded netcdf (4.6.1-4 -> 4.6.2-1)
[2018-11-22 13:37] [ALPM] upgraded openresolv (3.9.0-1 -> 3.9.0-2)
[2018-11-22 13:37] [ALPM] upgraded netctl (1.18-1 -> 1.19-1)
[2018-11-22 13:37] [ALPM] upgraded nvidia (410.66-3 -> 410.78-1)
[2018-11-22 13:37] [ALPM] upgraded nvidia-settings (410.66-1 -> 410.78-1)
[2018-11-22 13:37] [ALPM] upgraded opencl-nvidia (410.66-1 -> 410.78-1)
[2018-11-22 13:37] [ALPM] upgraded opencv (3.4.3-5 -> 3.4.4-1)
[2018-11-22 13:37] [ALPM] upgraded oxygen-icons (1:5.51.0-1 -> 1:5.52.0-1)
[2018-11-22 13:37] [ALPM] installed haskell-bitarray (0.0.1.1-9)
[2018-11-22 13:37] [ALPM] installed haskell-unicode-transforms (0.3.5-1)
[2018-11-22 13:37] [ALPM] upgraded pandoc (2.3.1-24 -> 2.4-7)
[2018-11-22 13:37] [ALPM] upgraded pangox-compat (0.0.2+2+gedb9e09-2 -> 0.0.2+2+gedb9e09-3)
[2018-11-22 13:37] [ALPM] upgraded patch (2.7.6-3 -> 2.7.6-7)
[2018-11-22 13:37] [ALPM] upgraded patchelf (0.9-1 -> 0.9-2)
[2018-11-22 13:37] [ALPM] upgraded pciutils (3.6.1-1 -> 3.6.2-1)
[2018-11-22 13:37] [ALPM] upgraded perl-net-dns (1.18-1 -> 1.19-1)
[2018-11-22 13:38] [ALPM] upgraded perl-parse-yapp (1.05-9 -> 1.21-1)
[2018-11-22 13:38] [ALPM] upgraded pinta (1.6-2 -> 1.6-3)
[2018-11-22 13:38] [ALPM] upgraded portaudio (190600_20161030-1 -> 190600_20161030-2)
[2018-11-22 13:38] [ALPM] upgraded postgresql-libs (10.5-3 -> 11.1-2)
[2018-11-22 13:38] [ALPM] upgraded postgresql (10.5-3 -> 11.1-2)
[2018-11-22 13:38] [ALPM] upgraded python-coverage (4.5.1-2 -> 4.5.2-1)
[2018-11-22 13:38] [ALPM] upgraded python-gmpy2 (2.1.0a2-3 -> 2.1.0a4-1)
[2018-11-22 13:38] [ALPM] upgraded python-matplotlib (3.0.1-1 -> 3.0.2-1)
[2018-11-22 13:38] [ALPM] upgraded python-pytest (3.9.3-1 -> 3.10.1-1)
[2018-11-22 13:38] [ALPM] upgraded python-pytest-xdist (1.24.0-1 -> 1.24.1-1)
[2018-11-22 13:38] [ALPM] upgraded python-urllib3 (1.24-1 -> 1.24.1-1)
[2018-11-22 13:38] [ALPM] upgraded python-requests (2.20.0-1 -> 2.20.1-1)
[2018-11-22 13:38] [ALPM] upgraded python-sqlalchemy (1.2.13-1 -> 1.2.14-1)
[2018-11-22 13:38] [ALPM] upgraded python-sphinx (1.8.0-1 -> 1.8.1-2)
[2018-11-22 13:38] [ALPM] upgraded python2-backports (1.0-1 -> 1.0-2)
[2018-11-22 13:38] [ALPM] upgraded python2-funcsigs (1.0.2-1 -> 1.0.2-2)
[2018-11-22 13:38] [ALPM] upgraded python2-pbr (5.1.0-1 -> 5.1.1-1)
[2018-11-22 13:38] [ALPM] upgraded python2-backports.unittest_mock (1.2.1-1 -> 1.2.1-2)
[2018-11-22 13:38] [ALPM] upgraded python2-cachetools (2.1.0-2 -> 3.0.0-1)
[2018-11-22 13:38] [ALPM] upgraded python2-configparser (3.5.0-1 -> 3.5.0-2)
[2018-11-22 13:38] [ALPM] upgraded python2-contextlib2 (0.5.5-1 -> 0.5.5-2)
[2018-11-22 13:38] [ALPM] upgraded python2-cryptography (2.3.1-1 -> 2.4.2-1)
[2018-11-22 13:38] [ALPM] upgraded python2-gmpy2 (2.1.0a2-3 -> 2.1.0a4-1)
[2018-11-22 13:38] [ALPM] upgraded python2-gobject (3.30.1-3 -> 3.30.2-1)
[2018-11-22 13:38] [ALPM] upgraded python2-google-auth (1.5.1-1 -> 1.6.1-1)
[2018-11-22 13:38] [ALPM] upgraded python2-markupsafe (1.0-2 -> 1.1.0-1)
[2018-11-22 13:38] [ALPM] upgraded python2-zc.lockfile (1.3.0-1 -> 1.4-1)
[2018-11-22 13:38] [ALPM] upgraded qjson (0.9.0-1 -> 0.9.0-2)
[2018-11-22 13:38] [ALPM] upgraded reiserfsprogs (3.6.27-1 -> 3.6.27-2)
[2018-11-22 13:38] [ALPM] upgraded smbclient (4.8.5-1 -> 4.9.2-1)
[2018-11-22 13:38] [ALPM] warning: directory permissions differ on /var/lib/samba/private/
filesystem: 755  package: 700
[2018-11-22 13:38] [ALPM] upgraded samba (4.8.5-1 -> 4.9.2-1)
[2018-11-22 13:38] [ALPM] upgraded screenfetch (3.8.0-2 -> 3.8.0-3)
[2018-11-22 13:38] [ALPM] upgraded sdl_image (1.2.12-4 -> 1.2.12-5)
[2018-11-22 13:38] [ALPM] upgraded smartmontools (6.6-1 -> 6.6-2)
[2018-11-22 13:38] [ALPM] upgraded strace (4.24-1 -> 4.25-1)
[2018-11-22 13:38] [ALPM] upgraded sudo (1.8.25.p1-1 -> 1.8.26-1)
[2018-11-22 13:38] [ALPM] upgraded swig (3.0.12-1 -> 3.0.12-2)
[2018-11-22 13:38] [ALPM] upgraded systemd-sysvcompat (239.2-1 -> 239.300-2)
[2018-11-22 13:38] [ALPM] upgraded t1lib (5.1.2-6 -> 5.1.2-7)
[2018-11-22 13:38] [ALPM] upgraded taglib (1.11.1-1 -> 1.11.1-2)
[2018-11-22 13:38] [ALPM] upgraded tcl (8.6.8-3 -> 8.6.9-2)
[2018-11-22 13:38] [ALPM] upgraded telepathy-logger (0.8.2-2 -> 0.8.2-3)
[2018-11-22 13:38] [ALPM] upgraded thunar-volman (0.8.1-2 -> 0.8.1-3)
[2018-11-22 13:38] [ALPM] upgraded tk (8.6.8-3 -> 8.6.9-1)
[2018-11-22 13:38] [ALPM] upgraded tree (1.7.0-2 -> 1.8.0-1)
[2018-11-22 13:38] [ALPM] upgraded ttf-anonymous-pro (1.003-3 -> 1.003-4)
[2018-11-22 13:38] [ALPM] upgraded vala (0.42.2-1 -> 0.42.3-2)
[2018-11-22 13:38] [ALPM] upgraded vim-runtime (8.1.0470-1 -> 8.1.0527-1)
[2018-11-22 13:38] [ALPM] upgraded vim (8.1.0470-1 -> 8.1.0527-1)
[2018-11-22 13:38] [ALPM] upgraded vimpager (2.06-3 -> 2.06-4)
[2018-11-22 13:38] [ALPM] upgraded virtualbox-host-modules-arch (5.2.20-3 -> 5.2.22-3)
[2018-11-22 13:38] [ALPM] upgraded virtualbox (5.2.20-1 -> 5.2.22-1)
[2018-11-22 13:38] [ALPM] upgraded vlc (3.0.4-6 -> 3.0.4-7)
[2018-11-22 13:38] [ALPM] upgraded whois (5.3.2-2 -> 5.4.0-1)
[2018-11-22 13:38] [ALPM] upgraded xapian-core (1:1.4.8-1 -> 1:1.4.9-1)
[2018-11-22 13:38] [ALPM] upgraded xcompmgr (1.1.7-2 -> 1.1.7-3)
[2018-11-22 13:38] [ALPM] upgraded xdotool (3.20160805.1-1 -> 3.20160805.1-2)
[2018-11-22 13:38] [ALPM] upgraded xf86-video-intel (1:2.99.917+853+g0932a6b3-1 -> 1:2.99.917+855+g746ab3bb-1)
[2018-11-22 13:38] [ALPM] upgraded xfce4-appfinder (4.12.0-4 -> 4.12.0-5)
[2018-11-22 13:38] [ALPM] upgraded xfce4-cpugraph-plugin (1.0.5-4 -> 1.0.5-5)
[2018-11-22 13:38] [ALPM] upgraded xfce4-datetime-plugin (0.7.0-1 -> 0.7.0-2)
[2018-11-22 13:38] [ALPM] upgraded xfce4-diskperf-plugin (2.6.1-1 -> 2.6.1-2)
[2018-11-22 13:38] [ALPM] upgraded xfce4-fsguard-plugin (1.1.0-1 -> 1.1.0-2)
[2018-11-22 13:38] [ALPM] upgraded xfce4-mailwatch-plugin (1.2.0-7 -> 1.2.0-8)
[2018-11-22 13:38] [ALPM] upgraded xfce4-mpc-plugin (0.5.0-1 -> 0.5.0-2)
[2018-11-22 13:38] [ALPM] upgraded xfce4-netload-plugin (1.3.1-1 -> 1.3.1-2)
[2018-11-22 13:38] [ALPM] upgraded xfce4-notes-plugin (1.8.1-2 -> 1.8.1-3)
[2018-11-22 13:38] [ALPM] upgraded xfce4-smartbookmark-plugin (0.5.0-1 -> 0.5.0-2)
[2018-11-22 13:38] [ALPM] upgraded xfce4-systemload-plugin (1.2.1-1 -> 1.2.1-2)
[2018-11-22 13:38] [ALPM] upgraded xfce4-time-out-plugin (1.0.2-2 -> 1.0.2-3)
[2018-11-22 13:38] [ALPM] upgraded xfce4-wavelan-plugin (0.6.0-1 -> 0.6.0-2)
[2018-11-22 13:38] [ALPM] upgraded xmlto (0.0.28-2 -> 0.0.28-3)
[2018-11-22 13:38] [ALPM] upgraded xorg-fonts-100dpi (1.0.3-3 -> 1.0.3-4)
[2018-11-22 13:38] [ALPM] upgraded xorg-fonts-75dpi (1.0.3-3 -> 1.0.3-4)
[2018-11-22 13:38] [ALPM] upgraded xorg-fonts-misc (1.0.3-5 -> 1.0.3-6)
[2018-11-22 13:38] [ALPM] upgraded xorg-sessreg (1.1.1-1 -> 1.1.1-2)
[2018-11-22 13:38] [ALPM] upgraded xorg-xauth (1.0.10-1 -> 1.0.10-2)
[2018-11-22 13:38] [ALPM] upgraded xreader (1.8.5-1 -> 2.0.0-1)
[2018-11-22 13:38] [ALPM] upgraded xsel (1.2.0.20160929-1 -> 1.2.0.20160929-2)
[2018-11-22 13:38] [ALPM] upgraded yasm (1.3.0-2 -> 1.3.0-3)

...

And just in case there was some weird unresolved dependancy, I also tried going DEFCON 1 by reinstalling everything:

% pacman -Syu $(pacman -Qnq)

Offline

#4 2018-11-23 11:30:51

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 5,718

Re: [SOLVED] LXDM boots to blank screen after NVIDIA 410.78 update

Hmm nothing sticking out either, in general I'm more inclined towards an issue with the new kernel rather than the nvidia driver, seeing as using nvidia-390xx doesn't help, which hasn't seen a relevant upstream change. However I don't see any of the occasional stacktraces like e.g. here appear in your dmesg, so I'm not entirely certain.

FWIW that dmesg is from after an attempt to start xorg or from before? If before, we need one from after, if you can't switch VTs due to a freeze or similar post the output of

sudo journalctl -b-1

after a reboot.

Last edited by V1del (2018-11-23 11:55:17)

Offline

#5 2018-11-23 13:05:56

NLisa
Member
Registered: 2016-08-23
Posts: 10

Re: [SOLVED] LXDM boots to blank screen after NVIDIA 410.78 update

Very anecdotal and peculiar, but I purged nvidia completely, again...

% pacman -Rncs nvidia nvidia-settings nvidia-utils

This also got rid of

cuda 10.0.130-2
cudnn 7.3.0-1
egl-wayland 1.1.0-1
eglexternalplatform 1.0+3+g7c8f8e2-1
lib32-nvidia-utils 415.18-1
pycuda-headers 2018.1.1-3
python-pycuda 2018.1.1-3
nvidia, (-settings, -utils) 415.18-1

Re-installed all of the above as well as the current kernel, and I can now reboot back into lightdm and start any DE of my choice hmm - sigh.

Thank you very much for your assistance,
NLisa

Offline

#6 2018-11-24 10:00:52

akstrfn
Member
Registered: 2018-04-10
Posts: 8

Re: [SOLVED] LXDM boots to blank screen after NVIDIA 410.78 update

Just to add for future reference.
I usually fix this problem booting into fallback image and then running :

mkinitcpio -P

This problem occurs occasionally on my nvidia machine.

Offline

Board footer

Powered by FluxBB