You are not logged in.
I have
xrandr -q
Screen 0: minimum 8 x 8, current 3360 x 1050, maximum 8192 x 8192
DP-0 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 430mm x 270mm
1680x1050 59.85 + 74.89* 59.95
1600x1200 75.00 60.00
1280x1024 75.02 60.02
1280x960 60.00
1152x864 75.00 70.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
640x480 75.00 72.81 59.94
DP-1 connected primary 1680x1050+1680+0 (normal left inverted right x axis y axis) 430mm x 270mm
1680x1050 59.85 + 74.89* 59.95
1600x1200 75.00 60.00
1280x1024 75.02 60.02
1280x960 60.00
1152x864 75.00 70.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
640x480 75.00 72.81 59.94
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
DP-5 disconnected (normal left inverted right x axis y axis)I'm entering commands
gtf 1680 1050 74.89
# 1680x1050 @ 74.89 Hz (GTF) hsync: 82.08 kHz; pclk: 187.80 MHz
Modeline "1680x1050_74.89" 187.80 1680 1800 1984 2288 1050 1051 1054 1096 -HSync +Vsyncxrandr --newmode "1680x1050_74.89" 188.07 1680 1800 1984 2288 1050 1051 1054 1096 -HSync +Vsyncxrandr --addmode DP-0 1680x1050_74.89
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 35
Current serial number in output stream: 36Adding 75Hz is the same error.
Does this also apply to me → https://wiki.archlinux.org/index.php/NV … r_BadMatch?
Last edited by thommen (2018-12-14 18:30:31)
Offline