You are not logged in.

#1 2018-12-31 09:29:24

PolePosition
Member
From: France
Registered: 2012-04-15
Posts: 86

touchpad usually does not work after kernel upgrade

Hello,

I have a laptop Asus ROG GL702ZC with RX 580.

After each kernel upgrade, I restart immediately so that I run the last kernel release.
Usually after such a kernel upgrade restart, the internal touchpad doesn't work anymore.
I have to restart one more time and sometimes even more. Then, magically, the touchpad works fine.

If several restarts are not enough, I plug an external mouse (which works very fine).
Generally one or two additional restarts are enough (but required).

Below are some information. But sorry those data are from a boot for which the touchpad worked fine:

dmesg output:

[    0.000000] Linux version 4.20.0-arch1-1-ARCH (builduser@heftig-29859) (gcc version 8.2.1 20181127 (GCC)) #1 SMP PREEMPT Mon Dec 24 03:00:40 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=9672ff0c-efc5-4194-8631-c1e8ecc6e610 rw cryptdevice=/dev/sdb3:cryptroot:allow-discards root=/dev/mapper/cryptroot quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009d7ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x00000000db7aafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db7ab000-0x00000000dcc92fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dcc93000-0x00000000dccc4fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dccc5000-0x00000000dcde4fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dcde5000-0x00000000dd759fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dd75a000-0x00000000dd815fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000dd816000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fdf00000-0x00000000fdffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f37ffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.60 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0xdcc9d000  ACPI=0xdcc9d000  SMBIOS=0xdd6c8000  SMBIOS 3.0=0xdd6c7000  ESRT=0xda4e0418  MEMATTR=0xd9c05018 
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. GL702ZC/GL702ZC, BIOS GL702ZC.305 05/10/2018
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x21f380 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000DF000000 mask FFFFFF000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000220000000 aka 8704M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 3568M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 1G 	num_reg: 3  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x00000000da4e0418 to 0x00000000da4e0450.
[    0.000000] check: Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x13c401000, 0x13c401fff] PGTABLE
[    0.000000] BRK [0x13c402000, 0x13c402fff] PGTABLE
[    0.000000] BRK [0x13c403000, 0x13c403fff] PGTABLE
[    0.000000] BRK [0x13c404000, 0x13c404fff] PGTABLE
[    0.000000] BRK [0x13c405000, 0x13c405fff] PGTABLE
[    0.000000] BRK [0x13c406000, 0x13c406fff] PGTABLE
[    0.000000] BRK [0x13c407000, 0x13c407fff] PGTABLE
[    0.000000] BRK [0x13c408000, 0x13c408fff] PGTABLE
[    0.000000] BRK [0x13c409000, 0x13c409fff] PGTABLE
[    0.000000] BRK [0x13c40a000, 0x13c40afff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x369e3000-0x374e8fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000DCC9D000 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0x00000000DCC9D0A8 0000D4 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DCCA6848 000114 (v06 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20181003/tbfadt-624)
[    0.000000] ACPI: DSDT 0x00000000DCC9D210 009635 (v02 _ASUS_ Notebook 01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000DCD95E00 000040
[    0.000000] ACPI: APIC 0x00000000DCCA6960 0000DE (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DCCA6A40 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000DCCA6A88 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: ECDT 0x00000000DCCA6B28 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DCCA6BF0 008C4C (v02 AMD    AMD ALIB 00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000DCCAF840 0020E4 (v01 AMD    AMD CPU  00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000DCCB1928 000F50 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000DCCB2878 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
[    0.000000] ACPI: MCFG 0x00000000DCCB28A8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00010013)
[    0.000000] ACPI: MSDM 0x00000000DCCB28E8 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001)
[    0.000000] ACPI: HPET 0x00000000DCCB2940 000038 (v01 _ASUS_ Notebook 01072009 AMI  00000005)
[    0.000000] ACPI: SSDT 0x00000000DCCB2978 000024 (v01 AMDFCH FCHZP    00001000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000DCCB29A0 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: VFCT 0x00000000DCCB29E8 00F084 (v01 _ASUS_ Notebook 00000001 AMD  31504F47)
[    0.000000] ACPI: BGRT 0x00000000DCCC1A70 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: TPM2 0x00000000DCCC1AA8 000034 (v03 _ASUS_ Notebook 00000001 AMI  00000000)
[    0.000000] ACPI: IVRS 0x00000000DCCC1AE0 0000D0 (v02 AMD    AMD IVRS 00000001 AMD  00000000)
[    0.000000] ACPI: SSDT 0x00000000DCCC1BB0 0000F8 (v01 AMD    AMD PT   00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000DCCC1CA8 000B6C (v01 AMD    CPMDFDGP 00000001 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000DCCC2818 000159 (v01 AMD    CPMDFNOI 00000001 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000DCCC2978 001664 (v01 AMD    CPMCMN   00000001 INTL 20120913)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21f37c000-0x21f37ffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021f37ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009d7ffff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x00000000db7aafff]
[    0.000000]   node   0: [mem 0x00000000dd816000-0x00000000deffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021f37ffff]
[    0.000000] Zeroed struct page in unavailable ranges: 13132 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f37ffff]
[    0.000000] On node 0 totalpages: 2080820
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 24 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14069 pages used for memmap
[    0.000000]   DMA32 zone: 900373 pages, LIFO batch:63
[    0.000000]   Normal zone: 18382 pages used for memmap
[    0.000000]   Normal zone: 1176448 pages, LIFO batch:63
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x09d80000-0x09ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb7ab000-0xdcc92fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdcc93000-0xdccc4fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdccc5000-0xdcde4fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdcde5000-0xdd759fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd75a000-0xdd815fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfdefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfdf00000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x95/0x54e with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2048281
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=9672ff0c-efc5-4194-8631-c1e8ecc6e610 rw cryptdevice=/dev/sdb3:cryptroot:allow-discards root=/dev/mapper/cryptroot quiet
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8040132K/8323280K available (12293K kernel code, 1268K rwdata, 3728K rodata, 1532K init, 3936K bss, 283148K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] ftrace: allocating 35812 entries in 140 pages
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.000000] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
[    0.000000] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.000000] NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.000000] Console: colour dummy device 80x25
[    0.000000] printk: console [tty0] enabled
[    0.000000] ACPI: Core revision 20181003
[    0.000000] ACPI: EC: EC started
[    0.000000] ACPI: EC: interrupt blocked
[    0.000000] ACPI: \: Used as first EC
[    0.000000] ACPI: \: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.000000] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.006666] Switched APIC routing to physical flat.
[    0.006666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.026666] tsc: PIT calibration matches HPET. 1 loops
[    0.026666] tsc: Detected 2994.133 MHz processor
[    0.000032] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b289eb09de, max_idle_ns: 440795208496 ns
[    0.000063] Calibrating delay loop (skipped), value calculated using timer frequency.. 5990.77 BogoMIPS (lpj=9980443)
[    0.000071] pid_max: default: 32768 minimum: 301
[    0.003518] LSM: Security Framework initializing
[    0.003523] Yama: becoming mindful.
[    0.003540] AppArmor: AppArmor disabled by boot time parameter
[    0.008946] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.010610] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.010723] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.010777] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.011678] mce: CPU supports 23 MCE banks
[    0.011736] LVT offset 1 assigned for vector 0xf9
[    0.012111] LVT offset 2 assigned for vector 0xf4
[    0.012154] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.012157] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[    0.012165] Spectre V2 : Mitigation: Full AMD retpoline
[    0.012167] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.012192] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.012194] Spectre V2 : User space: Vulnerable
[    0.012200] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.013088] Freeing SMP alternatives memory: 28K
[    0.023370] smpboot: CPU0: AMD Ryzen 7 1700 Eight-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
[    0.040113] Performance Events: Fam17h core perfctr, AMD PMU driver.
[    0.040137] ... version:                0
[    0.040139] ... bit width:              48
[    0.040142] ... generic registers:      6
[    0.040145] ... value mask:             0000ffffffffffff
[    0.040148] ... max period:             00007fffffffffff
[    0.040150] ... fixed-purpose events:   0
[    0.040152] ... event mask:             000000000000003f
[    0.046753] rcu: Hierarchical SRCU implementation.
[    0.070114] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.076774] smp: Bringing up secondary CPUs ...
[    0.116813] x86: Booting SMP configuration:
[    0.116820] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
[    0.682695] smp: Brought up 1 node, 16 CPUs
[    0.682695] smpboot: Max logical packages: 1
[    0.682695] smpboot: Total of 16 processors activated (95850.43 BogoMIPS)
[    0.686715] devtmpfs: initialized
[    0.686919] x86/mm: Memory block size: 128MB
[    0.690146] PM: Registering ACPI NVS region [mem 0xdccc5000-0xdcde4fff] (1179648 bytes)
[    0.690503] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.690503] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    0.690548] pinctrl core: initialized pinctrl subsystem
[    0.690866] RTC time:  9:20:05, date: 12/31/18
[    0.691559] NET: Registered protocol family 16
[    0.691869] audit: initializing netlink subsys (disabled)
[    0.691901] audit: type=2000 audit(1546248004.716:1): state=initialized audit_enabled=0 res=1
[    0.691901] cpuidle: using governor ladder
[    0.691901] cpuidle: using governor menu
[    0.693643] ACPI: bus type PCI registered
[    0.693650] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.693994] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.694005] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.694026] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.694384] PCI: Using configuration type 1 for base access
[    0.700248] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.700248] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.703422] ACPI: Added _OSI(Module Device)
[    0.703422] ACPI: Added _OSI(Processor Device)
[    0.703422] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.703422] ACPI: Added _OSI(Processor Aggregator Device)
[    0.703422] ACPI: Added _OSI(Linux-Dell-Video)
[    0.703422] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.711537] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.783229] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.820070] ACPI: Interpreter enabled
[    0.820156] ACPI: (supports S0 S3 S4 S5)
[    0.820160] ACPI: Using IOAPIC for interrupt routing
[    0.820826] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.822580] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.867813] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.867836] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.868955] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.870055] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.870124] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.872246] PCI host bridge to bus 0000:00
[    0.872257] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.872263] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.872270] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.872276] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.872282] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.872288] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.872300] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[    0.872305] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.872313] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.872340] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
[    0.872757] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
[    0.873183] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[    0.873567] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
[    0.873706] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[    0.874093] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
[    0.874456] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
[    0.874803] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
[    0.874932] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.875316] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
[    0.875683] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
[    0.876027] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
[    0.876083] pci 0000:00:07.1: enabling Extended Tags
[    0.876153] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.876511] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[    0.876879] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
[    0.876936] pci 0000:00:08.1: enabling Extended Tags
[    0.877007] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.877397] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.877868] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.878347] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
[    0.878685] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
[    0.879019] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
[    0.879349] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
[    0.879682] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
[    0.880025] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
[    0.880370] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
[    0.880699] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
[    0.881221] pci 0000:03:00.0: [1022:43bb] type 00 class 0x0c0330
[    0.881268] pci 0000:03:00.0: reg 0x10: [mem 0xfe7a0000-0xfe7a7fff 64bit]
[    0.881424] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.881658] pci 0000:03:00.1: [1022:43b7] type 00 class 0x010601
[    0.881729] pci 0000:03:00.1: reg 0x24: [mem 0xfe780000-0xfe79ffff]
[    0.881744] pci 0000:03:00.1: reg 0x30: [mem 0xfe700000-0xfe77ffff pref]
[    0.881832] pci 0000:03:00.1: PME# supported from D3hot D3cold
[    0.882019] pci 0000:03:00.2: [1022:43b2] type 01 class 0x060400
[    0.882171] pci 0000:03:00.2: PME# supported from D3hot D3cold
[    0.882442] pci 0000:00:01.3: PCI bridge to [bus 03-0b]
[    0.882454] pci 0000:00:01.3:   bridge window [io  0xd000-0xefff]
[    0.882463] pci 0000:00:01.3:   bridge window [mem 0xfe500000-0xfe7fffff]
[    0.882662] pci 0000:04:00.0: [1022:43b4] type 01 class 0x060400
[    0.882833] pci 0000:04:00.0: PME# supported from D3hot D3cold
[    0.883041] pci 0000:04:01.0: [1022:43b4] type 01 class 0x060400
[    0.883215] pci 0000:04:01.0: PME# supported from D3hot D3cold
[    0.883455] pci 0000:04:04.0: [1022:43b4] type 01 class 0x060400
[    0.883626] pci 0000:04:04.0: PME# supported from D3hot D3cold
[    0.883858] pci 0000:04:05.0: [1022:43b4] type 01 class 0x060400
[    0.884032] pci 0000:04:05.0: PME# supported from D3hot D3cold
[    0.884234] pci 0000:04:06.0: [1022:43b4] type 01 class 0x060400
[    0.884402] pci 0000:04:06.0: PME# supported from D3hot D3cold
[    0.884601] pci 0000:04:07.0: [1022:43b4] type 01 class 0x060400
[    0.884770] pci 0000:04:07.0: PME# supported from D3hot D3cold
[    0.884972] pci 0000:04:08.0: [1022:43b4] type 01 class 0x060400
[    0.885140] pci 0000:04:08.0: PME# supported from D3hot D3cold
[    0.885364] pci 0000:03:00.2: PCI bridge to [bus 04-0b]
[    0.885378] pci 0000:03:00.2:   bridge window [io  0xd000-0xefff]
[    0.885387] pci 0000:03:00.2:   bridge window [mem 0xfe500000-0xfe6fffff]
[    0.885485] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.885674] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
[    0.885736] pci 0000:06:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.885791] pci 0000:06:00.0: reg 0x18: [mem 0xfe604000-0xfe604fff 64bit]
[    0.885827] pci 0000:06:00.0: reg 0x20: [mem 0xfe600000-0xfe603fff 64bit]
[    0.886029] pci 0000:06:00.0: supports D1 D2
[    0.886035] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.886400] pci 0000:04:01.0: PCI bridge to [bus 06]
[    0.886413] pci 0000:04:01.0:   bridge window [io  0xe000-0xefff]
[    0.886422] pci 0000:04:01.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.886616] pci 0000:07:00.0: [10ec:b822] type 00 class 0x028000
[    0.886678] pci 0000:07:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.886739] pci 0000:07:00.0: reg 0x18: [mem 0xfe500000-0xfe50ffff 64bit]
[    0.886961] pci 0000:07:00.0: supports D1 D2
[    0.886967] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.887343] pci 0000:04:04.0: PCI bridge to [bus 07]
[    0.887356] pci 0000:04:04.0:   bridge window [io  0xd000-0xdfff]
[    0.887365] pci 0000:04:04.0:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.887471] pci 0000:04:05.0: PCI bridge to [bus 08]
[    0.887576] pci 0000:04:06.0: PCI bridge to [bus 09]
[    0.887683] pci 0000:04:07.0: PCI bridge to [bus 0a]
[    0.887787] pci 0000:04:08.0: PCI bridge to [bus 0b]
[    0.888124] pci 0000:0c:00.0: [1002:67df] type 00 class 0x030000
[    0.888173] pci 0000:0c:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.888195] pci 0000:0c:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.888211] pci 0000:0c:00.0: reg 0x20: [io  0xf000-0xf0ff]
[    0.888227] pci 0000:0c:00.0: reg 0x24: [mem 0xfe900000-0xfe93ffff]
[    0.888243] pci 0000:0c:00.0: reg 0x30: [mem 0xfe940000-0xfe95ffff pref]
[    0.888284] pci 0000:0c:00.0: BAR 0: assigned to efifb
[    0.888374] pci 0000:0c:00.0: supports D1 D2
[    0.888379] pci 0000:0c:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.888649] pci 0000:0c:00.1: [1002:aaf0] type 00 class 0x040300
[    0.888688] pci 0000:0c:00.1: reg 0x10: [mem 0xfe960000-0xfe963fff 64bit]
[    0.888818] pci 0000:0c:00.1: supports D1 D2
[    0.889062] pci 0000:00:03.1: PCI bridge to [bus 0c]
[    0.889073] pci 0000:00:03.1:   bridge window [io  0xf000-0xffff]
[    0.889081] pci 0000:00:03.1:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.889091] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.889272] pci 0000:11:00.0: [1022:145a] type 00 class 0x130000
[    0.889340] pci 0000:11:00.0: enabling Extended Tags
[    0.889562] pci 0000:11:00.2: [1022:1456] type 00 class 0x108000
[    0.889601] pci 0000:11:00.2: reg 0x18: [mem 0xfe300000-0xfe3fffff]
[    0.889625] pci 0000:11:00.2: reg 0x24: [mem 0xfe400000-0xfe401fff]
[    0.889642] pci 0000:11:00.2: enabling Extended Tags
[    0.889886] pci 0000:11:00.3: [1022:145c] type 00 class 0x0c0330
[    0.889921] pci 0000:11:00.3: reg 0x10: [mem 0xfe200000-0xfe2fffff 64bit]
[    0.889974] pci 0000:11:00.3: enabling Extended Tags
[    0.890061] pci 0000:11:00.3: PME# supported from D0 D3hot D3cold
[    0.890266] pci 0000:00:07.1: PCI bridge to [bus 11]
[    0.890279] pci 0000:00:07.1:   bridge window [mem 0xfe200000-0xfe4fffff]
[    0.890493] pci 0000:12:00.0: [1022:1455] type 00 class 0x130000
[    0.890562] pci 0000:12:00.0: enabling Extended Tags
[    0.890797] pci 0000:12:00.2: [1022:7901] type 00 class 0x010601
[    0.890869] pci 0000:12:00.2: reg 0x24: [mem 0xfe808000-0xfe808fff]
[    0.890889] pci 0000:12:00.2: enabling Extended Tags
[    0.890968] pci 0000:12:00.2: PME# supported from D3hot D3cold
[    0.891163] pci 0000:12:00.3: [1022:1457] type 00 class 0x040300
[    0.891190] pci 0000:12:00.3: reg 0x10: [mem 0xfe800000-0xfe807fff]
[    0.891238] pci 0000:12:00.3: enabling Extended Tags
[    0.891312] pci 0000:12:00.3: PME# supported from D0 D3hot D3cold
[    0.891523] pci 0000:00:08.1: PCI bridge to [bus 12]
[    0.891537] pci 0000:00:08.1:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.893773] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.894072] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.894333] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.894636] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.894916] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.895152] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.895386] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.895620] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.900076] ACPI: EC: interrupt unblocked
[    0.900097] ACPI: EC: event unblocked
[    0.900116] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.900123] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.903421] pci 0000:0c:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.903431] pci 0000:0c:00.0: vgaarb: bridge control possible
[    0.903436] pci 0000:0c:00.0: vgaarb: setting as boot device
[    0.903439] vgaarb: loaded
[    0.903995] ACPI: bus type USB registered
[    0.904046] usbcore: registered new interface driver usbfs
[    0.904076] usbcore: registered new interface driver hub
[    0.904199] usbcore: registered new device driver usb
[    0.908752] pps_core: LinuxPPS API ver. 1 registered
[    0.908757] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.908767] PTP clock support registered
[    0.908798] EDAC MC: Ver: 3.0.0
[    0.910126] Registered efivars operations
[    0.963711] PCI: Using ACPI for IRQ routing
[    0.965877] PCI: pci_cache_line_size set to 64 bytes
[    0.966076] e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff]
[    0.966083] e820: reserve RAM buffer [mem 0xdb7ab000-0xdbffffff]
[    0.966087] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.966091] e820: reserve RAM buffer [mem 0x21f380000-0x21fffffff]
[    0.966525] NetLabel: Initializing
[    0.966529] NetLabel:  domain hash size = 128
[    0.966531] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.966582] NetLabel:  unlabeled traffic allowed by default
[    0.966873] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.966887] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.970048] clocksource: Switched to clocksource tsc-early
[    1.015809] VFS: Disk quotas dquot_6.6.0
[    1.015889] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.016162] pnp: PnP ACPI init
[    1.016831] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.016853] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.017229] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
[    1.017247] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.018004] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.019222] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    1.019231] system 00:03: [io  0x040b] has been reserved
[    1.019238] system 00:03: [io  0x04d6] has been reserved
[    1.019245] system 00:03: [io  0x0c00-0x0c01] has been reserved
[    1.019252] system 00:03: [io  0x0c14] has been reserved
[    1.019258] system 00:03: [io  0x0c50-0x0c51] has been reserved
[    1.019265] system 00:03: [io  0x0c52] has been reserved
[    1.019271] system 00:03: [io  0x0c6c] has been reserved
[    1.019277] system 00:03: [io  0x0c6f] has been reserved
[    1.019284] system 00:03: [io  0x0cd0-0x0cd1] has been reserved
[    1.019290] system 00:03: [io  0x0cd2-0x0cd3] has been reserved
[    1.019296] system 00:03: [io  0x0cd4-0x0cd5] has been reserved
[    1.019302] system 00:03: [io  0x0cd6-0x0cd7] has been reserved
[    1.019308] system 00:03: [io  0x0cd8-0x0cdf] has been reserved
[    1.019315] system 00:03: [io  0x0800-0x089f] has been reserved
[    1.019321] system 00:03: [io  0x0900-0x090f] has been reserved
[    1.019327] system 00:03: [io  0x0910-0x091f] has been reserved
[    1.019337] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.019345] system 00:03: [mem 0xfec01000-0xfec01fff] could not be reserved
[    1.019352] system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    1.019359] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[    1.019367] system 00:03: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    1.019374] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
[    1.019380] system 00:03: [mem 0xff000000-0xffffffff] has been reserved
[    1.019398] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.021867] pnp: PnP ACPI: found 4 devices
[    1.033327] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.033510] pci 0000:04:00.0: PCI bridge to [bus 05]
[    1.033537] pci 0000:04:01.0: PCI bridge to [bus 06]
[    1.033546] pci 0000:04:01.0:   bridge window [io  0xe000-0xefff]
[    1.033557] pci 0000:04:01.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    1.033574] pci 0000:04:04.0: PCI bridge to [bus 07]
[    1.033582] pci 0000:04:04.0:   bridge window [io  0xd000-0xdfff]
[    1.033592] pci 0000:04:04.0:   bridge window [mem 0xfe500000-0xfe5fffff]
[    1.033608] pci 0000:04:05.0: PCI bridge to [bus 08]
[    1.033628] pci 0000:04:06.0: PCI bridge to [bus 09]
[    1.033648] pci 0000:04:07.0: PCI bridge to [bus 0a]
[    1.033668] pci 0000:04:08.0: PCI bridge to [bus 0b]
[    1.033688] pci 0000:03:00.2: PCI bridge to [bus 04-0b]
[    1.033695] pci 0000:03:00.2:   bridge window [io  0xd000-0xefff]
[    1.033705] pci 0000:03:00.2:   bridge window [mem 0xfe500000-0xfe6fffff]
[    1.033720] pci 0000:00:01.3: PCI bridge to [bus 03-0b]
[    1.033726] pci 0000:00:01.3:   bridge window [io  0xd000-0xefff]
[    1.033735] pci 0000:00:01.3:   bridge window [mem 0xfe500000-0xfe7fffff]
[    1.033750] pci 0000:00:03.1: PCI bridge to [bus 0c]
[    1.033757] pci 0000:00:03.1:   bridge window [io  0xf000-0xffff]
[    1.033766] pci 0000:00:03.1:   bridge window [mem 0xfe900000-0xfe9fffff]
[    1.033774] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    1.033787] pci 0000:00:07.1: PCI bridge to [bus 11]
[    1.033796] pci 0000:00:07.1:   bridge window [mem 0xfe200000-0xfe4fffff]
[    1.033810] pci 0000:00:08.1: PCI bridge to [bus 12]
[    1.033820] pci 0000:00:08.1:   bridge window [mem 0xfe800000-0xfe8fffff]
[    1.033837] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    1.033845] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    1.033851] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    1.033857] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    1.033864] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    1.033870] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    1.033876] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[    1.033882] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    1.033889] pci_bus 0000:03: resource 0 [io  0xd000-0xefff]
[    1.033894] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe7fffff]
[    1.033901] pci_bus 0000:04: resource 0 [io  0xd000-0xefff]
[    1.033907] pci_bus 0000:04: resource 1 [mem 0xfe500000-0xfe6fffff]
[    1.033913] pci_bus 0000:06: resource 0 [io  0xe000-0xefff]
[    1.033918] pci_bus 0000:06: resource 1 [mem 0xfe600000-0xfe6fffff]
[    1.033925] pci_bus 0000:07: resource 0 [io  0xd000-0xdfff]
[    1.033930] pci_bus 0000:07: resource 1 [mem 0xfe500000-0xfe5fffff]
[    1.033937] pci_bus 0000:0c: resource 0 [io  0xf000-0xffff]
[    1.033943] pci_bus 0000:0c: resource 1 [mem 0xfe900000-0xfe9fffff]
[    1.033949] pci_bus 0000:0c: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[    1.033955] pci_bus 0000:11: resource 1 [mem 0xfe200000-0xfe4fffff]
[    1.033961] pci_bus 0000:12: resource 1 [mem 0xfe800000-0xfe8fffff]
[    1.034419] NET: Registered protocol family 2
[    1.035511] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    1.035630] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.036128] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.036611] TCP: Hash tables configured (established 65536 bind 65536)
[    1.036781] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.036872] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.037164] NET: Registered protocol family 1
[    1.037184] NET: Registered protocol family 44
[    1.037891] pci 0000:0c:00.1: Linked as a consumer to 0000:0c:00.0
[    1.038642] PCI: CLS 64 bytes, default 64
[    1.038801] Unpacking initramfs...
[    1.840127] Freeing initrd memory: 11288K
[    1.840167] AMD-Vi: IOMMU performance counters supported
[    1.840551] pci 0000:00:00.2: can't derive routing for PCI INT A
[    1.840558] pci 0000:00:00.2: PCI INT A: not connected
[    1.841379] iommu: Adding device 0000:00:01.0 to group 0
[    1.841741] iommu: Adding device 0000:00:01.3 to group 1
[    1.842068] iommu: Adding device 0000:00:02.0 to group 2
[    1.842440] iommu: Adding device 0000:00:03.0 to group 3
[    1.842748] iommu: Adding device 0000:00:03.1 to group 4
[    1.843118] iommu: Adding device 0000:00:04.0 to group 5
[    1.843528] iommu: Adding device 0000:00:07.0 to group 6
[    1.843590] iommu: Adding device 0000:00:07.1 to group 6
[    1.843980] iommu: Adding device 0000:00:08.0 to group 7
[    1.844043] iommu: Adding device 0000:00:08.1 to group 7
[    1.844388] iommu: Adding device 0000:00:14.0 to group 8
[    1.844446] iommu: Adding device 0000:00:14.3 to group 8
[    1.844954] iommu: Adding device 0000:00:18.0 to group 9
[    1.845018] iommu: Adding device 0000:00:18.1 to group 9
[    1.845075] iommu: Adding device 0000:00:18.2 to group 9
[    1.845129] iommu: Adding device 0000:00:18.3 to group 9
[    1.845182] iommu: Adding device 0000:00:18.4 to group 9
[    1.845237] iommu: Adding device 0000:00:18.5 to group 9
[    1.845293] iommu: Adding device 0000:00:18.6 to group 9
[    1.845347] iommu: Adding device 0000:00:18.7 to group 9
[    1.845734] iommu: Adding device 0000:03:00.0 to group 10
[    1.845808] iommu: Adding device 0000:03:00.1 to group 10
[    1.845884] iommu: Adding device 0000:03:00.2 to group 10
[    1.845920] iommu: Adding device 0000:04:00.0 to group 10
[    1.845953] iommu: Adding device 0000:04:01.0 to group 10
[    1.845987] iommu: Adding device 0000:04:04.0 to group 10
[    1.846019] iommu: Adding device 0000:04:05.0 to group 10
[    1.846056] iommu: Adding device 0000:04:06.0 to group 10
[    1.846089] iommu: Adding device 0000:04:07.0 to group 10
[    1.846121] iommu: Adding device 0000:04:08.0 to group 10
[    1.846164] iommu: Adding device 0000:06:00.0 to group 10
[    1.846207] iommu: Adding device 0000:07:00.0 to group 10
[    1.846631] iommu: Adding device 0000:0c:00.0 to group 11
[    1.846725] iommu: Using direct mapping for device 0000:0c:00.0
[    1.846815] iommu: Adding device 0000:0c:00.1 to group 11
[    1.846847] iommu: Adding device 0000:11:00.0 to group 6
[    1.846877] iommu: Adding device 0000:11:00.2 to group 6
[    1.846906] iommu: Adding device 0000:11:00.3 to group 6
[    1.846938] iommu: Adding device 0000:12:00.0 to group 7
[    1.846968] iommu: Adding device 0000:12:00.2 to group 7
[    1.846998] iommu: Adding device 0000:12:00.3 to group 7
[    1.847561] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[    1.847565] AMD-Vi: Extended features (0xf77ef22294ada):
[    1.847568]  PPR NX GT IA GA PC GA_vAPIC
[    1.847578] AMD-Vi: Interrupt remapping enabled
[    1.847579] AMD-Vi: virtual APIC enabled
[    1.848081] AMD-Vi: Lazy IO/TLB flushing enabled
[    1.853593] amd_uncore: AMD NB counters detected
[    1.853613] amd_uncore: AMD LLC counters detected
[    1.855775] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    1.855938] check: Scanning for low memory corruption every 60 seconds
[    1.858763] Initialise system trusted keyrings
[    1.858802] Key type blacklist registered
[    1.859171] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    1.864363] zbud: loaded
[    2.002750] Key type asymmetric registered
[    2.002755] Asymmetric key parser 'x509' registered
[    2.002794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    2.003064] io scheduler noop registered
[    2.003068] io scheduler deadline registered
[    2.003198] io scheduler cfq registered (default)
[    2.003202] io scheduler mq-deadline registered
[    2.003205] io scheduler kyber registered
[    2.003360] io scheduler bfq registered
[    2.005105] pcieport 0000:00:01.3: Signaling PME with IRQ 26
[    2.005474] aer 0000:00:01.3:pcie002: AER enabled with IRQ 26
[    2.005768] pcieport 0000:00:03.1: Signaling PME with IRQ 27
[    2.005983] aer 0000:00:03.1:pcie002: AER enabled with IRQ 27
[    2.006263] pcieport 0000:00:07.1: Signaling PME with IRQ 28
[    2.006915] pcieport 0000:00:08.1: Signaling PME with IRQ 30
[    2.010305] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.010599] efifb: probing for efifb
[    2.010651] efifb: Ignoring BGRT: unexpected or invalid BMP data
[    2.010655] efifb: framebuffer at 0xe0000000, using 1984k, total 1984k
[    2.010660] efifb: mode is 800x600x32, linelength=3328, pages=1
[    2.010662] efifb: scrolling: redraw
[    2.010668] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.010910] fbcon: Deferring console take-over
[    2.010915] fb0: EFI VGA frame buffer device
[    2.011167] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:51/PNP0C09:00/PNP0C0D:00/input/input0
[    2.011196] ACPI: Lid Switch [LID]
[    2.011326] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    2.011350] ACPI: Power Button [PWRB]
[    2.011487] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    2.011509] ACPI: Sleep Button [SLPB]
[    2.011648] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.011697] ACPI: Power Button [PWRF]
[    2.012015] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    2.013080] acpi device:30: registered as cooling_device0
[    2.013234] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2f/LNXVIDEO:00/input/input4
[    2.023712] thermal LNXTHERM:00: registered as thermal_zone0
[    2.023718] ACPI: Thermal Zone [THRM] (22 C)
[    2.024505] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.032546] usbcore: registered new interface driver usbserial_generic
[    2.032565] usbserial: USB Serial support registered for generic
[    2.032626] rtc_cmos 00:02: RTC can wake from S4
[    2.033062] rtc_cmos 00:02: registered as rtc0
[    2.033120] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.034476] ledtrig-cpu: registered to indicate activity on CPUs
[    2.035461] NET: Registered protocol family 10
[    2.054385] Segment Routing with IPv6
[    2.054467] NET: Registered protocol family 17
[    2.059720] RAS: Correctable Errors collector initialized.
[    2.059897] microcode: CPU0: patch_level=0x08001137
[    2.059926] microcode: CPU1: patch_level=0x08001137
[    2.059998] microcode: CPU2: patch_level=0x08001137
[    2.060024] microcode: CPU3: patch_level=0x08001137
[    2.060095] microcode: CPU4: patch_level=0x08001137
[    2.060123] microcode: CPU5: patch_level=0x08001137
[    2.060193] microcode: CPU6: patch_level=0x08001137
[    2.060223] microcode: CPU7: patch_level=0x08001137
[    2.060298] microcode: CPU8: patch_level=0x08001137
[    2.060322] microcode: CPU9: patch_level=0x08001137
[    2.060335] microcode: CPU10: patch_level=0x08001137
[    2.060358] microcode: CPU11: patch_level=0x08001137
[    2.060426] microcode: CPU12: patch_level=0x08001137
[    2.060451] microcode: CPU13: patch_level=0x08001137
[    2.060520] microcode: CPU14: patch_level=0x08001137
[    2.060542] microcode: CPU15: patch_level=0x08001137
[    2.060711] microcode: Microcode Update Driver: v2.2.
[    2.060753] sched_clock: Marking stable (2087309718, -26629513)->(2172588628, -111908423)
[    2.062168] registered taskstats version 1
[    2.062192] Loading compiled-in X.509 certificates
[    2.073712] Loaded X.509 cert 'Build time autogenerated kernel key: 607bf7b41813a10b7fecf0eb8d5fb1179fd6fddf'
[    2.073826] zswap: loaded using pool lzo/zbud
[    2.094948] Key type big_key registered
[    2.096288]   Magic number: 14:591:324
[    2.096368] tty tty49: hash matches
[    2.096435] acpi PNP0B00:00: hash matches
[    2.096955] rtc_cmos 00:02: setting system clock to 2018-12-31 09:20:07 UTC (1546248007)
[    2.102260] Freeing unused decrypted memory: 2040K
[    2.103274] Freeing unused kernel image memory: 1532K
[    2.130693] Write protecting the kernel read-only data: 18432k
[    2.132800] Freeing unused kernel image memory: 2016K
[    2.133196] Freeing unused kernel image memory: 368K
[    2.180671] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.180689] Run /init as init process
[    2.413447] fbcon: Taking over console
[    2.413715] Console: switching to colour frame buffer device 100x37
[    2.695466] SCSI subsystem initialized
[    2.696478] ccp 0000:11:00.2: enabling device (0000 -> 0002)
[    2.697178] QUIRK: Enable AMD PLL fix
[    2.697266] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    2.697302] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[    2.699581] ccp 0000:11:00.2: ccp enabled
[    2.699667] ccp 0000:11:00.2: psp initialization failed
[    2.699676] ccp 0000:11:00.2: enabled
[    2.700504] cryptd: max_cpu_qlen set to 1000
[    2.728272] AVX2 version of gcm_enc/dec engaged.
[    2.728276] AES CTR mode by8 optimization enabled
[    2.743561] libata version 3.00 loaded.
[    2.752860] xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000048000418
[    2.753715] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
[    2.753725] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.753733] usb usb1: Product: xHCI Host Controller
[    2.753741] usb usb1: Manufacturer: Linux 4.20.0-arch1-1-ARCH xhci-hcd
[    2.753746] usb usb1: SerialNumber: 0000:03:00.0
[    2.754259] hub 1-0:1.0: USB hub found
[    2.754295] hub 1-0:1.0: 10 ports detected
[    2.756067] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    2.756087] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    2.756101] xhci_hcd 0000:03:00.0: Host supports USB 3.10 Enhanced SuperSpeed
[    2.756182] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.756282] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20
[    2.756291] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.756298] usb usb2: Product: xHCI Host Controller
[    2.756304] usb usb2: Manufacturer: Linux 4.20.0-arch1-1-ARCH xhci-hcd
[    2.756312] usb usb2: SerialNumber: 0000:03:00.0
[    2.756884] hub 2-0:1.0: USB hub found
[    2.756936] hub 2-0:1.0: 4 ports detected
[    2.758023] xhci_hcd 0000:11:00.3: xHCI Host Controller
[    2.758046] xhci_hcd 0000:11:00.3: new USB bus registered, assigned bus number 3
[    2.758246] xhci_hcd 0000:11:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000418
[    2.758762] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
[    2.758771] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.758777] usb usb3: Product: xHCI Host Controller
[    2.758783] usb usb3: Manufacturer: Linux 4.20.0-arch1-1-ARCH xhci-hcd
[    2.758791] usb usb3: SerialNumber: 0000:11:00.3
[    2.759231] hub 3-0:1.0: USB hub found
[    2.759259] hub 3-0:1.0: 4 ports detected
[    2.760023] ahci 0000:03:00.1: version 3.0
[    2.760068] ahci 0000:03:00.1: enabling device (0000 -> 0002)
[    2.760217] xhci_hcd 0000:11:00.3: xHCI Host Controller
[    2.760237] xhci_hcd 0000:11:00.3: new USB bus registered, assigned bus number 4
[    2.760255] xhci_hcd 0000:11:00.3: Host supports USB 3.0  SuperSpeed
[    2.760342] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.760453] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20
[    2.760462] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.760469] usb usb4: Product: xHCI Host Controller
[    2.760476] usb usb4: Manufacturer: Linux 4.20.0-arch1-1-ARCH xhci-hcd
[    2.760482] usb usb4: SerialNumber: 0000:11:00.3
[    2.760489] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
[    2.760566] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[    2.760579] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    2.760911] hub 4-0:1.0: USB hub found
[    2.760940] hub 4-0:1.0: 4 ports detected
[    2.763213] scsi host0: ahci
[    2.763818] scsi host1: ahci
[    2.764329] scsi host2: ahci
[    2.764721] scsi host3: ahci
[    2.765188] scsi host4: ahci
[    2.765597] scsi host5: ahci
[    2.765973] scsi host6: ahci
[    2.766347] scsi host7: ahci
[    2.766552] ata1: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780100 irq 48
[    2.766559] ata2: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780180 irq 48
[    2.766564] ata3: DUMMY
[    2.766567] ata4: DUMMY
[    2.766573] ata5: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780300 irq 48
[    2.766579] ata6: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780380 irq 48
[    2.766582] ata7: DUMMY
[    2.766585] ata8: DUMMY
[    2.767568] ahci 0000:12:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x8 impl SATA mode
[    2.767581] ahci 0000:12:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
[    2.767589] ahci 0000:12:00.2: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
[    2.768957] scsi host8: ahci
[    2.769745] scsi host9: ahci
[    2.770228] scsi host10: ahci
[    2.770769] scsi host11: ahci
[    2.770988] ata9: DUMMY
[    2.770992] ata10: DUMMY
[    2.770995] ata11: DUMMY
[    2.771003] ata12: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808280 irq 53
[    2.880587] tsc: Refined TSC clocksource calibration: 2994.372 MHz
[    2.880635] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b29812ce43, max_idle_ns: 440795323173 ns
[    2.880764] clocksource: Switched to clocksource tsc
[    3.084034] usb 1-8: new high-speed USB device number 2 using xhci_hcd
[    3.240602] ata12: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.241911] ata12.00: ATA-9: SanDisk SD8SN8U256G1002, X4131002, max UDMA/133
[    3.241918] ata12.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    3.243810] ata12.00: configured for UDMA/133
[    3.281919] usb 1-8: New USB device found, idVendor=0bda, idProduct=57fa, bcdDevice= 0.02
[    3.281930] usb 1-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.281938] usb 1-8: Product: USB2.0 HD UVC WebCam
[    3.281944] usb 1-8: Manufacturer: 04081-0009510017261001292
[    3.281949] usb 1-8: SerialNumber: 200901010001
[    3.417252] usb 1-9: new full-speed USB device number 3 using xhci_hcd
[    3.762774] usb 1-9: New USB device found, idVendor=0b05, idProduct=1837, bcdDevice= 0.01
[    3.762784] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.762791] usb 1-9: Product: ROG MacroKey
[    3.762797] usb 1-9: Manufacturer: ASASTeK COMPUTER INC.
[    3.806762] hidraw: raw HID events driver (C) Jiri Kosina
[    3.843204] usbcore: registered new interface driver usbhid
[    3.843209] usbhid: USB HID core driver
[    3.868348] asus_wmi: ASUS WMI generic driver loaded
[    3.873810] input: ASASTeK COMPUTER INC. ROG MacroKey as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9:1.0/0003:0B05:1837.0001/input/input5
[    3.913926] usb 1-10: new full-speed USB device number 4 using xhci_hcd
[    3.931100] asus 0003:0B05:1837.0001: input,hidraw0: USB HID v1.10 Keyboard [ASASTeK COMPUTER INC. ROG MacroKey] on usb-0000:03:00.0-9/input0
[    3.951288] input: ASASTeK COMPUTER INC. ROG MacroKey as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9:1.1/0003:0B05:1837.0002/input/input6
[    4.007900] asus 0003:0B05:1837.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [ASASTeK COMPUTER INC. ROG MacroKey] on usb-0000:03:00.0-9/input1
[    4.008398] input: ASASTeK COMPUTER INC. ROG MacroKey as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9:1.2/0003:0B05:1837.0003/input/input7
[    4.008515] asus 0003:0B05:1837.0003: input,hidraw2: USB HID v1.10 Mouse [ASASTeK COMPUTER INC. ROG MacroKey] on usb-0000:03:00.0-9/input2
[    4.158530] usb 1-10: New USB device found, idVendor=13d3, idProduct=3526, bcdDevice= 1.10
[    4.158541] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.158548] usb 1-10: Product: Bluetooth Radio 
[    4.158554] usb 1-10: Manufacturer: Realtek 
[    4.158559] usb 1-10: SerialNumber: 00e04c000001
[    6.127268] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    6.129406] ata1.00: ATA-8: HGST HTS721010A9E630, JB0OA3V0, max UDMA/133
[    6.129416] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    6.131805] ata1.00: configured for UDMA/133
[    6.132707] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS721010A9 A3V0 PQ: 0 ANSI: 5
[    6.446166] ata2: SATA link down (SStatus 0 SControl 300)
[    7.480575] ata5: failed to resume link (SControl 0)
[    7.480599] ata5: SATA link down (SStatus 0 SControl 0)
[    7.792323] ata6: SATA link down (SStatus 0 SControl 300)
[    7.793692] scsi 11:0:0:0: Direct-Access     ATA      SanDisk SD8SN8U2 1002 PQ: 0 ANSI: 5
[    7.807985] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    7.807995] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    7.808052] sd 0:0:0:0: [sda] Write Protect is off
[    7.808062] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.808148] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.808200] sd 11:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    7.808251] sd 11:0:0:0: [sdb] Write Protect is off
[    7.808262] sd 11:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    7.808347] sd 11:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.818625]  sdb: sdb1 sdb2 sdb3
[    7.820799] sd 11:0:0:0: [sdb] Attached SCSI disk
[    7.830832] sd 0:0:0:0: [sda] Attached SCSI disk
[    7.987804] device-mapper: uevent: version 1.0.3
[    7.988078] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[   17.051308] random: fast init done
[   21.444161] NET: Registered protocol family 38
[   21.707057] random: cryptsetup: uninitialized urandom read (2 bytes read)
[   21.769041] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   21.860926] random: crng init done
[   21.917908] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[   21.933915] systemd[1]: Detected architecture x86-64.
[   21.950291] systemd[1]: Set hostname to <bravo>.
[   22.028035] systemd[1]: /run/systemd/generator/systemd-cryptsetup@DOCUMENTS.service:10: RequiresMountsFor= path is not absolute, ignoring: ask
[   22.059313] systemd[1]: Listening on udev Kernel Socket.
[   22.059542] systemd[1]: Listening on LVM2 metadata daemon socket.
[   22.059602] systemd[1]: Listening on Journal Socket.
[   22.064299] systemd[1]: Starting Load Kernel Modules...
[   22.064524] systemd[1]: Listening on LVM2 poll daemon socket.
[   22.064591] systemd[1]: Listening on Journal Audit Socket.
[   22.076151] EXT4-fs (dm-0): re-mounted. Opts: discard,data=ordered
[   22.079716] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   22.079749] sd 11:0:0:0: Attached scsi generic sg1 type 0
[   22.086982] audit: type=1130 audit(1546248027.487:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[   22.087561] audit: type=1130 audit(1546248027.487:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.088730] audit: type=1130 audit(1546248027.487:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.097147] audit: type=1130 audit(1546248027.497:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.106357] audit: type=1130 audit(1546248027.504:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.122517] audit: type=1130 audit(1546248027.520:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.122699] audit: type=1130 audit(1546248027.520:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.130601] systemd-journald[521]: Received request to flush runtime journal from PID 1
[   22.139421] audit: type=1130 audit(1546248027.537:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.194987] audit: type=1130 audit(1546248027.594:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.299061] audit: type=1130 audit(1546248027.697:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hwdb-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.357935] acpi_cpufreq: overriding BIOS provided _PSD data
[   22.372139] i2c_hid i2c-ELAN1200:00: i2c-ELAN1200:00 supply vdd not found, using dummy regulator
[   22.372157] i2c_hid i2c-ELAN1200:00: Linked as a consumer to regulator.0
[   22.372160] i2c_hid i2c-ELAN1200:00: i2c-ELAN1200:00 supply vddl not found, using dummy regulator
[   22.374446] ACPI: AC Adapter [AC0] (on-line)
[   22.389343] battery: ACPI: Battery Slot [BAT0] (battery present)
[   22.389426] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input8
[   22.400396] input: ELAN1200:00 04F3:3066 Mouse as /devices/platform/AMDI0010:03/i2c-0/i2c-ELAN1200:00/0018:04F3:3066.0004/input/input9
[   22.400590] input: ELAN1200:00 04F3:3066 Touchpad as /devices/platform/AMDI0010:03/i2c-0/i2c-ELAN1200:00/0018:04F3:3066.0004/input/input10
[   22.400821] hid-generic 0018:04F3:3066.0004: input,hidraw3: I2C HID v1.00 Mouse [ELAN1200:00 04F3:3066] on i2c-ELAN1200:00
[   22.405901] tpm_crb MSFT0101:00: can't request region for resource [mem 0xdcdca000-0xdcdcafff]
[   22.405908] tpm_crb: probe of MSFT0101:00 failed with error -16
[   22.408486] input: PC Speaker as /devices/platform/pcspkr/input/input11
[   22.418808] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   22.418811] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[   22.424045] i8042: PNP: No PS/2 controller found.
[   22.426406] Linux agpgart interface v0.103
[   22.428506] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[   22.428620] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[   22.428630] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[   22.539843] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   22.542851] kvm: disabled by bios
[   22.544393] libphy: r8169: probed
[   22.544693] r8169 0000:06:00.0 eth0: RTL8168g/8111g, 2c:fd:a1:25:de:a0, XID 50900800, IRQ 67
[   22.544695] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   22.546080] MCE: In-kernel MCE decoding enabled.
[   22.546183] r8169 0000:06:00.0 enp6s0: renamed from eth0
[   22.550268] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   22.553282] EDAC amd64: Node 0: DRAM ECC disabled.
[   22.553284] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   22.560579] snd_hda_intel 0000:0c:00.1: enabling device (0000 -> 0002)
[   22.560669] snd_hda_intel 0000:0c:00.1: Handle vga_switcheroo audio client
[   22.560671] snd_hda_intel 0000:0c:00.1: Force to non-snoop mode
[   22.560950] snd_hda_intel 0000:12:00.3: enabling device (0000 -> 0002)
[   22.574826] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   22.574829] cfg80211: failed to load regulatory.db
[   22.583291] input: ELAN1200:00 04F3:3066 Touchpad as /devices/platform/AMDI0010:03/i2c-0/i2c-ELAN1200:00/0018:04F3:3066.0004/input/input15
[   22.583387] hid-multitouch 0018:04F3:3066.0004: input,hidraw3: I2C HID v1.00 Mouse [ELAN1200:00 04F3:3066] on i2c-ELAN1200:00
[   22.641285] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:0c:00.1/sound/card0/input12
[   22.641377] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:0c:00.1/sound/card0/input13
[   22.642772] EDAC amd64: Node 0: DRAM ECC disabled.
[   22.642773] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   22.653359] mousedev: PS/2 mouse device common for all mice
[   22.659579] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   22.659584] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   22.659587] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   22.659590] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   22.659593] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   22.659596] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x12
[   22.665773] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[   22.693837] r8822be: module is from the staging directory, the quality is unknown, you have been warned.
[   22.701542] r8822be 0000:07:00.0: enabling device (0000 -> 0003)
[   22.702668] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:12:00.3/sound/card1/input16
[   22.718368] r8822be: Using firmware rtlwifi/rtl8822befw.bin
[   22.725218] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   22.725514] r8822be: rtlwifi: wireless switch is on
[   22.726961] r8822be 0000:07:00.0 wlp7s0: renamed from wlan0
[   22.865969] [drm] amdgpu kernel modesetting enabled.
[   22.866051] Parsing CRAT table with 1 nodes
[   22.866056] Ignoring ACPI CRAT on non-APU system
[   22.866058] Virtual CRAT table created for CPU
[   22.866059] Parsing CRAT table with 1 nodes
[   22.866060] Creating topology SYSFS entries
[   22.866067] Topology: Add CPU node
[   22.866067] Finished initializing topology
[   22.866163] checking generic (e0000000 1f0000) vs hw (e0000000 10000000)
[   22.866164] fb0: switching to amdgpudrmfb from EFI VGA
[   22.866182] Console: switching to colour dummy device 80x25
[   22.866308] amdgpu 0000:0c:00.0: enabling device (0006 -> 0007)
[   22.866522] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1043:0x1A60 0xC1).
[   22.866562] [drm] register mmio base: 0xFE900000
[   22.866563] [drm] register mmio size: 262144
[   22.866572] [drm] add ip block number 0 <vi_common>
[   22.866573] [drm] add ip block number 1 <gmc_v8_0>
[   22.866574] [drm] add ip block number 2 <tonga_ih>
[   22.866575] [drm] add ip block number 3 <gfx_v8_0>
[   22.866576] [drm] add ip block number 4 <sdma_v3_0>
[   22.866577] [drm] add ip block number 5 <powerplay>
[   22.866578] [drm] add ip block number 6 <dm>
[   22.866579] [drm] add ip block number 7 <uvd_v6_0>
[   22.866580] [drm] add ip block number 8 <vce_v3_0>
[   22.866591] [drm] UVD is enabled in VM mode
[   22.866591] [drm] UVD ENC is enabled in VM mode
[   22.866593] [drm] VCE enabled in VM mode
[   22.866616] ATOM BIOS: SWBRT25190.001
[   22.866638] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[   22.867311] amdgpu 0000:0c:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
[   22.867313] amdgpu 0000:0c:00.0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[   22.867318] [drm] Detected VRAM RAM=4096M, BAR=256M
[   22.867319] [drm] RAM width 256bits GDDR5
[   22.867389] [TTM] Zone  kernel: Available graphics memory: 4082794 kiB
[   22.867390] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   22.867390] [TTM] Initializing pool allocator
[   22.867393] [TTM] Initializing DMA pool allocator
[   22.867684] [drm] amdgpu: 4096M of VRAM memory ready
[   22.867685] [drm] amdgpu: 4096M of GTT memory ready.
[   22.867703] [drm] GART: num cpu pages 65536, num gpu pages 65536
[   22.869319] [drm] PCIE GART of 256M enabled (table at 0x000000F4001D5000).
[   22.870088] [drm] Chained IB support enabled!
[   22.875988] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[   22.877567] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
[   22.938698] [drm] DM_PPLIB: values for Engine clock
[   22.938700] [drm] DM_PPLIB:	 300000
[   22.938700] [drm] DM_PPLIB:	 608000
[   22.938700] [drm] DM_PPLIB:	 910000
[   22.938701] [drm] DM_PPLIB:	 1077000
[   22.938701] [drm] DM_PPLIB:	 1077000
[   22.938702] [drm] DM_PPLIB:	 1077000
[   22.938702] [drm] DM_PPLIB:	 1077000
[   22.938702] [drm] DM_PPLIB:	 1077000
[   22.938703] [drm] DM_PPLIB: Validation clocks:
[   22.938703] [drm] DM_PPLIB:    engine_max_clock: 107700
[   22.938704] [drm] DM_PPLIB:    memory_max_clock: 200000
[   22.938704] [drm] DM_PPLIB:    level           : 8
[   22.938705] [drm] DM_PPLIB: values for Memory clock
[   22.938706] [drm] DM_PPLIB:	 300000
[   22.938706] [drm] DM_PPLIB:	 2000000
[   22.938706] [drm] DM_PPLIB: Validation clocks:
[   22.938707] [drm] DM_PPLIB:    engine_max_clock: 107700
[   22.938707] [drm] DM_PPLIB:    memory_max_clock: 200000
[   22.938707] [drm] DM_PPLIB:    level           : 8
[   22.947166] [drm] Display Core initialized with v3.1.68!
[   22.953841] [drm] SADs count is: -2, don't need to read it
[   22.995275] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   22.995277] [drm] Driver supports precise vblank timestamp query.
[   23.003320] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: discard,data=ordered
[   23.024470] [drm] UVD and UVD ENC initialized successfully.
[   23.125438] [drm] VCE initialized successfully.
[   23.126746] kfd kfd: Allocated 3969056 bytes on gart
[   23.126764] Virtual CRAT table created for GPU
[   23.126765] Parsing CRAT table with 1 nodes
[   23.126775] Creating topology SYSFS entries
[   23.126870] Topology: Add dGPU node [0x67df:0x1002]
[   23.126941] kfd kfd: added device 1002:67df
[   23.128470] [drm] fb mappable at 0xE06FD000
[   23.128471] [drm] vram apper at 0xE0000000
[   23.128472] [drm] size 8294400
[   23.128472] [drm] fb depth is 24
[   23.128473] [drm]    pitch is 7680
[   23.128534] fbcon: amdgpudrmfb (fb0) is primary device
[   23.143765] Console: switching to colour frame buffer device 240x67
[   23.164022] amdgpu 0000:0c:00.0: fb0: amdgpudrmfb frame buffer device
[   23.188908] [drm] Initialized amdgpu 3.27.0 20150101 for 0000:0c:00.0 on minor 0
[   23.517258] media: Linux media interface: v0.10
[   23.536828] videodev: Linux video capture interface: v2.00
[   23.560191] Bluetooth: Core ver 2.22
[   23.560207] NET: Registered protocol family 31
[   23.560207] Bluetooth: HCI device and connection manager initialized
[   23.560211] Bluetooth: HCI socket layer initialized
[   23.560213] Bluetooth: L2CAP socket layer initialized
[   23.560218] Bluetooth: SCO socket layer initialized
[   23.678937] usbcore: registered new interface driver btusb
[   23.679133] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (0bda:57fa)
[   23.729676] uvcvideo 1-8:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
[   23.729678] uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized!
[   23.729679] uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized!
[   23.729680] uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized!
[   23.729737] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8:1.0/input/input17
[   23.729796] usbcore: registered new interface driver uvcvideo
[   23.729796] USB Video Class driver (1.1.1)
[   24.085119] Bluetooth: hci0: RTL: rtl: examining hci_ver=07 hci_rev=000b lmp_ver=07 lmp_subver=8822

[   24.087201] Bluetooth: hci0: RTL: rom_version status=0 version=2

[   24.087205] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8822b_fw.bin

[   24.095663] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8822b_config.bin

[   24.095867] Bluetooth: hci0: RTL: cfg_sz 14, total sz 20270

[   28.702223] kauditd_printk_skb: 12 callbacks suppressed
[   28.702225] audit: type=1131 audit(1546248034.100:24): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   29.833692] audit: type=1130 audit(1546248035.234:25): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-cryptsetup@DOCUMENTS comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   29.977213] audit: type=1130 audit(1546248035.377:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-679b37d0\x2d0900\x2d46f0\x2d8973\x2dfae19e9bc996 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   30.007160] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[   30.021293] audit: type=1130 audit(1546248035.420:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   30.028177] audit: type=1130 audit(1546248035.427:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   30.033036] audit: type=1127 audit(1546248035.430:29): pid=1127 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[   30.036817] audit: type=1130 audit(1546248035.437:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   30.182576] audit: type=1130 audit(1546248035.580:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   30.194573] audit: type=1130 audit(1546248035.594:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   30.201969] audit: type=1130 audit(1546248035.600:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   30.232512] 8021q: 802.1Q VLAN Support v1.8
[   30.265877] Generic PHY r8169-600:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-600:00, irq=IGNORE)
[   30.365592] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
[   30.670196] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
[   30.672530] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[   39.265027] kauditd_printk_skb: 33 callbacks suppressed
[   39.265029] audit: type=1006 audit(1546248044.664:59): pid=1200 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[   39.283357] audit: type=1130 audit(1546248044.680:60): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   39.291360] audit: type=1006 audit(1546248044.690:61): pid=1657 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   39.336987] audit: type=1130 audit(1546248044.737:62): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   40.986581] audit: type=1131 audit(1546248046.384:63): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   41.105370] audit: type=1130 audit(1546248046.504:64): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   41.534171] fuse init (API version 7.28)
[   41.873245] audit: type=1130 audit(1546248047.270:65): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   41.957818] audit: type=1130 audit(1546248047.357:66): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   60.654798] audit: type=1131 audit(1546248066.054:67): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

lspci output:

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Root Complex
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) I/O Memory Management Unit
00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge
00:01.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe GPP Bridge
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge
00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge
00:03.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe GPP Bridge
00:04.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge
00:07.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge
00:07.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Internal PCIe GPP Bridge 0 to Bus B
00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) PCIe Dummy Host Bridge
00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Internal PCIe GPP Bridge 0 to Bus B
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 59)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 5
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 6
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Data Fabric: Device 18h; Function 7
03:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset USB 3.1 xHCI Controller (rev 02)
03:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset SATA Controller (rev 02)
03:00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43b2 (rev 02)
04:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02)
04:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02)
04:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02)
04:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02)
04:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02)
04:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02)
04:08.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
07:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8822BE 802.11a/b/g/n/ac WiFi adapter
0c:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X] (rev c1)
0c:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 580]
11:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Device 145a
11:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) Platform Security Processor
11:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) USB 3.0 Host Controller
12:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Device 1455
12:00.2 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51)
12:00.3 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) HD Audio Controller

Do you have an idea?

Last edited by PolePosition (2018-12-31 16:30:55)


Life is not linear.
-----------
Arch power !

Offline

#2 2019-01-17 01:54:40

Sangeppato
Member
Registered: 2019-01-10
Posts: 16

Re: touchpad usually does not work after kernel upgrade

Was that dmesg taken when the touchpad was working?
If it was, could you provide a dmesg output when the touchpad is not working?
It could be the elan_i2c module, you can blacklist it creating this file:

/etc/modprobe.d/elan.conf

# Do not load the elan_i2c module since the touchpad is controlled by i2c_hid
blacklist elan_i2c
install elan_i2c /bin/false

I'm not sure though, it would be better to wait for the new dmesg

Last edited by Sangeppato (2019-01-17 01:55:15)

Offline

Board footer

Powered by FluxBB