You are not logged in.

Pages: 1

#1 2019-01-19 09:40:23

Blume
Member
Registered: 2019-01-19
Posts: 8

[solved] nvidia: corrupted graphics after login

I recently switched to the proprietary nvidia driver and now have the following problem. I can successfully start X and the display manager, but after login in both monitors stay blank (one with a blue background, the other one with a black one). I can see the mouse pointer though and my desktop environment is running: for instance, I can open an xterm and execute commands, I just don't see anything. I noticed that, if I switch off one of my monitors in this state with "xrandr --output DP-6 --off", the other monitor gets reset, which fixes the issue. Then I can start the second monitor again and all is fine.

Any ideas of what might be going on? Is this a driver bug, or did I mess up the installation?

I run an up to date system. My card is

  01:00.0 VGA compatible controller: NVIDIA Corporation GP107GLM [Quadro P1000 Mobile] (rev a1)

The problem occurs both with lxdm and sddm. I can post both dmesg and Xorg.log if needed.

Last edited by Blume (2019-01-20 13:19:05)

Offline

#2 2019-01-19 17:37:04

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,426
Website

Re: [solved] nvidia: corrupted graphics after login

Please edit you thread title and reflect your actual issue: https://wiki.archlinux.org/index.php/Co … ow_to_post

And then paste your xorg log.



Moving to NC...

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#3 2019-01-19 19:09:25

Blume
Member
Registered: 2019-01-19
Posts: 8

Re: [solved] nvidia: corrupted graphics after login

Here is my Xorg.0.log.

[     7.115] 
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[     7.115] Build Operating System: Linux Arch Linux
[     7.115] Current Operating System: Linux wasp 4.20.3-arch1-1-ARCH #1 SMP PREEMPT Wed Jan 16 22:38:58 UTC 2019 x86_64
[     7.115] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=dc532c4f-e69d-4400-ac22-c45d34bb2d59 rw nvidia-drm.modeset=1 quiet
[     7.115] Build Date: 25 October 2018  04:42:32PM
[     7.115]  
[     7.115] Current version of pixman: 0.36.0
[     7.115] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     7.115] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     7.115] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 19 19:36:14 2019
[     7.116] (==) Using config file: "/etc/X11/xorg.conf"
[     7.116] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     7.117] (==) No Layout section.  Using the first Screen section.
[     7.117] (**) |-->Screen "Screen0" (0)
[     7.117] (**) |   |-->Monitor "DP-0"
[     7.117] (**) |   |-->Device "Nvidia"
[     7.117] (==) Automatically adding devices
[     7.117] (==) Automatically enabling devices
[     7.117] (==) Automatically adding GPU devices
[     7.117] (==) Automatically binding GPU devices
[     7.117] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     7.117] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[     7.117] 	Entry deleted from font path.
[     7.117] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[     7.117] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     7.117] 	Entry deleted from font path.
[     7.117] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     7.117] 	Entry deleted from font path.
[     7.118] (==) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[     7.118] (==) ModulePath set to "/usr/lib/xorg/modules"
[     7.118] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     7.118] (II) Module ABI versions:
[     7.118] 	X.Org ANSI C Emulation: 0.4
[     7.118] 	X.Org Video Driver: 24.0
[     7.118] 	X.Org XInput driver : 24.1
[     7.118] 	X.Org Server Extension : 10.0
[     7.118] (++) using VT number 1

[     7.118] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     7.119] (II) xfree86: Adding drm device (/dev/dri/card0)
[     7.120] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[     7.120] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[     7.120] (--) PCI:*(1@0:0:0) 10de:1cbb:103c:8458 rev 161, Mem @ 0xe2000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/131072
[     7.120] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     7.120] (II) LoadModule: "glx"
[     7.122] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     7.128] (II) Module glx: vendor="X.Org Foundation"
[     7.128] 	compiled for 1.20.3, module version = 1.0.0
[     7.128] 	ABI class: X.Org Server Extension, version 10.0
[     7.128] (II) LoadModule: "nvidia"
[     7.128] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     7.130] (II) Module nvidia: vendor="NVIDIA Corporation"
[     7.130] 	compiled for 4.0.2, module version = 1.0.0
[     7.130] 	Module class: X.Org Video Driver
[     7.131] (II) NVIDIA dlloader X Driver  415.25  Wed Dec 12 10:05:51 CST 2018
[     7.131] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     7.131] (II) Loading sub module "fb"
[     7.131] (II) LoadModule: "fb"
[     7.131] (II) Loading /usr/lib/xorg/modules/libfb.so
[     7.132] (II) Module fb: vendor="X.Org Foundation"
[     7.132] 	compiled for 1.20.3, module version = 1.0.0
[     7.132] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     7.132] (II) Loading sub module "wfb"
[     7.132] (II) LoadModule: "wfb"
[     7.132] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     7.132] (II) Module wfb: vendor="X.Org Foundation"
[     7.132] 	compiled for 1.20.3, module version = 1.0.0
[     7.132] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     7.132] (II) Loading sub module "ramdac"
[     7.132] (II) LoadModule: "ramdac"
[     7.132] (II) Module "ramdac" already built-in
[     7.134] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[     7.134] (==) NVIDIA(0): RGB weight 888
[     7.134] (==) NVIDIA(0): Default visual is TrueColor
[     7.134] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     7.134] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[     7.134] (**) NVIDIA(0): Option "Stereo" "0"
[     7.134] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
[     7.134] (**) NVIDIA(0): Option "UseEdidDpi" "false"
[     7.134] (**) NVIDIA(0): Option "DPI" "192 x 192"
[     7.134] (**) NVIDIA(0): Option "SLI" "Off"
[     7.134] (**) NVIDIA(0): Option "MultiGPU" "Off"
[     7.134] (**) NVIDIA(0): Option "BaseMosaic" "off"
[     7.134] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[     7.134] (**) NVIDIA(0): Stereo disabled by request
[     7.134] (**) NVIDIA(0): NVIDIA SLI disabled.
[     7.134] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[     7.134] (**) NVIDIA(0): Option "MetaModes" "DP-0: nvidia-auto-select +2160+0 {ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}, DP-6: nvidia-auto-select +0+0 {rotation=left, ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}"
[     7.134] (**) NVIDIA(0): Enabling 2D acceleration
[     7.134] (II) Loading sub module "glxserver_nvidia"
[     7.134] (II) LoadModule: "glxserver_nvidia"
[     7.134] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[     7.150] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[     7.150] 	compiled for 4.0.2, module version = 1.0.0
[     7.150] 	Module class: X.Org Server Extension
[     7.150] (II) NVIDIA GLX Module  415.25  Wed Dec 12 10:05:39 CST 2018
[     7.152] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[     7.152] (--) NVIDIA(0):     DFP-0 (boot)
[     7.152] (--) NVIDIA(0):     DFP-1
[     7.152] (--) NVIDIA(0):     DFP-2
[     7.152] (--) NVIDIA(0):     DFP-3
[     7.152] (--) NVIDIA(0):     DFP-4
[     7.152] (--) NVIDIA(0):     DFP-5
[     7.152] (--) NVIDIA(0):     DFP-6
[     7.152] (--) NVIDIA(0):     DFP-7
[     7.153] (II) NVIDIA(0): NVIDIA GPU Quadro P1000 (GP107GL-A) at PCI:1:0:0 (GPU-0)
[     7.153] (--) NVIDIA(0): Memory: 4194304 kBytes
[     7.153] (--) NVIDIA(0): VideoBIOS: 86.07.4a.00.58
[     7.153] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     7.153] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS PB279 (DFP-0): connected
[     7.153] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS PB279 (DFP-0): Internal DisplayPort
[     7.153] (--) NVIDIA(GPU-0): Ancor Communications Inc ASUS PB279 (DFP-0): 1440.0 MHz maximum pixel clock
[     7.153] (--) NVIDIA(GPU-0): 
[     7.154] (--) NVIDIA(GPU-0): DFP-1: disconnected
[     7.154] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[     7.154] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[     7.154] (--) NVIDIA(GPU-0): 
[     7.154] (--) NVIDIA(GPU-0): DFP-2: disconnected
[     7.154] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[     7.154] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[     7.154] (--) NVIDIA(GPU-0): 
[     7.154] (--) NVIDIA(GPU-0): DFP-3: disconnected
[     7.154] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[     7.154] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[     7.154] (--) NVIDIA(GPU-0): 
[     7.154] (--) NVIDIA(GPU-0): DFP-4: disconnected
[     7.154] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[     7.154] (--) NVIDIA(GPU-0): DFP-4: 1440.0 MHz maximum pixel clock
[     7.154] (--) NVIDIA(GPU-0): 
[     7.155] (--) NVIDIA(GPU-0): DFP-5: disconnected
[     7.155] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[     7.155] (--) NVIDIA(GPU-0): DFP-5: 165.0 MHz maximum pixel clock
[     7.155] (--) NVIDIA(GPU-0): 
[     7.155] (--) NVIDIA(GPU-0): BenQ LCD (DFP-6): connected
[     7.155] (--) NVIDIA(GPU-0): BenQ LCD (DFP-6): Internal DisplayPort
[     7.155] (--) NVIDIA(GPU-0): BenQ LCD (DFP-6): 1440.0 MHz maximum pixel clock
[     7.155] (--) NVIDIA(GPU-0): 
[     7.157] (--) NVIDIA(GPU-0): DFP-7: disconnected
[     7.157] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[     7.157] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[     7.157] (--) NVIDIA(GPU-0): 
[     7.157] (**) NVIDIA(0): Option "Primary" "true"
[     7.157] (**) NVIDIA(0): Option "Rotate" "left"
[     7.163] (II) NVIDIA(0): Validated MetaModes:
[     7.163] (II) NVIDIA(0):    
[     7.163] (II) NVIDIA(0):     "DP-0:nvidia-auto-select+2160+0{ForceCompositionPipeline=On,ForceFullCompositionPipeline=On},DP-6:nvidia-auto-select+0+0{rotation=left,ForceCompositionPipeline=On,ForceFullCompositionPipeline=On}"
[     7.163] (II) NVIDIA(0): Virtual screen size determined to be 6000 x 3840
[     7.167] (**) NVIDIA(0): DPI set to (192, 192); computed from "DPI" X config option
[     7.168] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[     7.168] (II) NVIDIA:     access.
[     7.169] (WW) NVIDIA(0): ACPI: AC power state information is not available under
[     7.169] (WW) NVIDIA(0):     /sys/class/power_supply/ , nor under
[     7.169] (WW) NVIDIA(0):     /proc/acpi/ac_adapter/
[     7.170] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[     7.170] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[     7.170] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[     7.170] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[     7.170] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[     7.170] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[     7.170] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[     7.170] (II) NVIDIA(0):     Config Options in the README.
[     7.183] (II) NVIDIA(0): Setting mode "DP-0:nvidia-auto-select+2160+0{ForceCompositionPipeline=On,ForceFullCompositionPipeline=On},DP-6:nvidia-auto-select+0+0{rotation=left,ForceCompositionPipeline=On,ForceFullCompositionPipeline=On}"
[     7.416] (==) NVIDIA(0): Disabling shared memory pixmaps
[     7.417] (==) NVIDIA(0): Backing store enabled
[     7.417] (==) NVIDIA(0): Silken mouse disabled
[     7.417] (**) NVIDIA(0): DPMS enabled
[     7.417] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[     7.417] (WW) NVIDIA(0): Option "Primary" is not used
[     7.417] (WW) NVIDIA(0): Option "PreferredMode" is not used
[     7.417] (II) Loading sub module "dri2"
[     7.417] (II) LoadModule: "dri2"
[     7.417] (II) Module "dri2" already built-in
[     7.417] (II) NVIDIA(0): [DRI2] Setup complete
[     7.417] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     7.418] (II) Initializing extension Generic Event Extension
[     7.418] (II) Initializing extension SHAPE
[     7.418] (II) Initializing extension MIT-SHM
[     7.418] (II) Initializing extension XInputExtension
[     7.418] (II) Initializing extension XTEST
[     7.418] (II) Initializing extension BIG-REQUESTS
[     7.418] (II) Initializing extension SYNC
[     7.418] (II) Initializing extension XKEYBOARD
[     7.418] (II) Initializing extension XC-MISC
[     7.418] (II) Initializing extension SECURITY
[     7.418] (II) Initializing extension XFIXES
[     7.418] (II) Initializing extension RENDER
[     7.419] (II) Initializing extension RANDR
[     7.419] (II) Initializing extension COMPOSITE
[     7.419] (II) Initializing extension DAMAGE
[     7.419] (II) Initializing extension MIT-SCREEN-SAVER
[     7.419] (II) Initializing extension DOUBLE-BUFFER
[     7.419] (II) Initializing extension RECORD
[     7.419] (II) Initializing extension DPMS
[     7.419] (II) Initializing extension Present
[     7.419] (II) Initializing extension DRI3
[     7.419] (II) Initializing extension X-Resource
[     7.419] (II) Initializing extension XVideo
[     7.419] (II) Initializing extension XVideo-MotionCompensation
[     7.419] (II) Initializing extension GLX
[     7.419] (II) Initializing extension GLX
[     7.419] (II) Indirect GLX disabled.
[     7.419] (II) GLX: Another vendor is already registered for screen 0
[     7.419] (II) Initializing extension XFree86-VidModeExtension
[     7.419] (II) Initializing extension XFree86-DGA
[     7.419] (II) Initializing extension XFree86-DRI
[     7.419] (II) Initializing extension DRI2
[     7.419] (II) Initializing extension NV-GLX
[     7.419] (II) Initializing extension NV-CONTROL
[     7.419] (II) Initializing extension XINERAMA
[     7.476] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     7.476] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     7.476] (II) LoadModule: "libinput"
[     7.476] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     7.480] (II) Module libinput: vendor="X.Org Foundation"
[     7.480] 	compiled for 1.20.1, module version = 0.28.1
[     7.480] 	Module class: X.Org XInput Driver
[     7.480] 	ABI class: X.Org XInput driver, version 24.1
[     7.480] (II) Using input driver 'libinput' for 'Power Button'
[     7.480] (**) Power Button: always reports core events
[     7.480] (**) Option "Device" "/dev/input/event2"
[     7.480] (**) Option "_source" "server/udev"
[     7.484] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     7.484] (II) event2  - Power Button: device is a keyboard
[     7.484] (II) event2  - Power Button: device removed
[     7.508] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     7.508] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     7.508] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     7.508] (II) event2  - Power Button: device is a keyboard
[     7.508] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     7.508] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     7.508] (II) Using input driver 'libinput' for 'Power Button'
[     7.508] (**) Power Button: always reports core events
[     7.508] (**) Option "Device" "/dev/input/event1"
[     7.508] (**) Option "_source" "server/udev"
[     7.509] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     7.509] (II) event1  - Power Button: device is a keyboard
[     7.509] (II) event1  - Power Button: device removed
[     7.548] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     7.548] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     7.549] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     7.549] (II) event1  - Power Button: device is a keyboard
[     7.549] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[     7.549] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     7.549] (II) Using input driver 'libinput' for 'Sleep Button'
[     7.549] (**) Sleep Button: always reports core events
[     7.549] (**) Option "Device" "/dev/input/event0"
[     7.549] (**) Option "_source" "server/udev"
[     7.550] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[     7.550] (II) event0  - Sleep Button: device is a keyboard
[     7.550] (II) event0  - Sleep Button: device removed
[     7.574] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[     7.574] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     7.576] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[     7.576] (II) event0  - Sleep Button: device is a keyboard
[     7.578] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event10)
[     7.578] (II) No input driver specified, ignoring this device.
[     7.578] (II) This device may have been added with another device file.
[     7.579] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event11)
[     7.579] (II) No input driver specified, ignoring this device.
[     7.579] (II) This device may have been added with another device file.
[     7.579] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
[     7.579] (II) No input driver specified, ignoring this device.
[     7.579] (II) This device may have been added with another device file.
[     7.580] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event9)
[     7.580] (II) No input driver specified, ignoring this device.
[     7.580] (II) This device may have been added with another device file.
[     7.580] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event7)
[     7.580] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[     7.580] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[     7.580] (**) Logitech USB Optical Mouse: always reports core events
[     7.580] (**) Option "Device" "/dev/input/event7"
[     7.580] (**) Option "_source" "server/udev"
[     7.581] (II) event7  - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[     7.581] (II) event7  - Logitech USB Optical Mouse: device is a pointer
[     7.581] (II) event7  - Logitech USB Optical Mouse: device removed
[     7.641] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.2/1-8.2:1.0/0003:046D:C077.0001/input/input7/event7"
[     7.641] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[     7.641] (**) Option "AccelerationScheme" "none"
[     7.641] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[     7.641] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[     7.641] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[     7.642] (II) event7  - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[     7.642] (II) event7  - Logitech USB Optical Mouse: device is a pointer
[     7.643] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[     7.643] (II) No input driver specified, ignoring this device.
[     7.643] (II) This device may have been added with another device file.
[     7.644] (II) config/udev: Adding input device Cherry GmbH (/dev/input/event8)
[     7.644] (**) Cherry GmbH: Applying InputClass "libinput keyboard catchall"
[     7.644] (II) Using input driver 'libinput' for 'Cherry GmbH'
[     7.644] (**) Cherry GmbH: always reports core events
[     7.644] (**) Option "Device" "/dev/input/event8"
[     7.644] (**) Option "_source" "server/udev"
[     7.645] (II) event8  - Cherry GmbH: is tagged by udev as: Keyboard
[     7.645] (II) event8  - Cherry GmbH: device is a keyboard
[     7.645] (II) event8  - Cherry GmbH: device removed
[     7.681] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.4/1-8.4:1.0/0003:046A:0001.0002/input/input8/event8"
[     7.681] (II) XINPUT: Adding extended input device "Cherry GmbH" (type: KEYBOARD, id 10)
[     7.684] (II) event8  - Cherry GmbH: is tagged by udev as: Keyboard
[     7.684] (II) event8  - Cherry GmbH: device is a keyboard
[     7.685] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event5)
[     7.685] (II) No input driver specified, ignoring this device.
[     7.685] (II) This device may have been added with another device file.
[     7.686] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event6)
[     7.686] (II) No input driver specified, ignoring this device.
[     7.686] (II) This device may have been added with another device file.
[     7.687] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[     7.687] (II) No input driver specified, ignoring this device.
[     7.687] (II) This device may have been added with another device file.
[     7.688] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event4)
[     7.688] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     7.688] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[     7.688] (**) HP WMI hotkeys: always reports core events
[     7.688] (**) Option "Device" "/dev/input/event4"
[     7.688] (**) Option "_source" "server/udev"
[     7.689] (II) event4  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[     7.689] (II) event4  - HP WMI hotkeys: device is a keyboard
[     7.689] (II) event4  - HP WMI hotkeys: device removed
[     7.761] (**) Option "config_info" "udev:/sys/devices/virtual/input/input4/event4"
[     7.761] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 11)
[     7.762] (II) event4  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[     7.762] (II) event4  - HP WMI hotkeys: device is a keyboard
[    33.515] (II) NVIDIA(0): Setting mode "DP-6: nvidia-auto-select @2160x3840 +0+0 {ViewPortIn=2160x3840, ViewPortOut=3840x2160+0+0, Rotation=90, ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}"
[    33.720] (II) NVIDIA(0): Setting mode "NULL"
[    33.779] (II) NVIDIA(0): Setting mode "DP-0: nvidia-auto-select @3840x2160 +0+0 {ViewPortIn=3840x2160, ViewPortOut=3840x2160+0+0, ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}"
[    42.004] (II) NVIDIA(0): Setting mode "DP-0: nvidia-auto-select @3840x2160 +2160+0 {ViewPortIn=3840x2160, ViewPortOut=3840x2160+0+0, ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}"
[    42.254] (II) NVIDIA(0): Setting mode "DP-0: nvidia-auto-select @3840x2160 +2160+0 {ViewPortIn=3840x2160, ViewPortOut=3840x2160+0+0, ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}, DP-6: nvidia-auto-select @2160x3840 +0+0 {ViewPortIn=2160x3840, ViewPortOut=3840x2160+0+0, Rotation=90, ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}"

Offline

#4 2019-01-19 20:25:17

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,667

Re: [solved] nvidia: corrupted graphics after login

[     7.152] (--) NVIDIA(0):     DFP-0 (boot)
[     7.152] (--) NVIDIA(0):     DFP-1
[     7.152] (--) NVIDIA(0):     DFP-2
[     7.152] (--) NVIDIA(0):     DFP-3
[     7.152] (--) NVIDIA(0):     DFP-4
[     7.152] (--) NVIDIA(0):     DFP-5
[     7.152] (--) NVIDIA(0):     DFP-6
[     7.152] (--) NVIDIA(0):     DFP-7

There's no "DP-6" output, so the

[     7.117] (**) |   |-->Monitor "DP-0"

most likely invoked by

[     7.116] (==) Using config file: "/etc/X11/xorg.conf"

Is bogus.
Move away that file, you're not supposed to use a static config anyway. If you want to impact some eg. nvidia specific settings, please use a configlet in xorg.conf.d, https://wiki.archlinux.org/index.php/Xorg#Configuration

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#5 2019-01-19 20:49:00

Blume
Member
Registered: 2019-01-19
Posts: 8

Re: [solved] nvidia: corrupted graphics after login

According to xrandr -q my monitors are called DP-0 and DP-6. Also my xorg.conf works in so far as the login screen of my display manager uses the correct layout. It's only after I log in that the display starts to act up.

I have tried changing the monitor names to DFP-0 and DFP-6, but that made no difference. I also tried it without my xorg.conf and the problem disappeared. So it seems to be a problem with my configuration. Any ideas what I'm doing wrong? The xorg.conf is attached.

Section "Monitor"
  Identifier "DP-0"
  Option "Primary" "true"
  Option "DPMS"    "true"
  Option "PreferredMode" "3840x2160"
EndSection

Section "Monitor"
  Identifier "DP-6"
  Option "LeftOf"  "DP-0"
  Option "Rotate"  "left"
  Option "DPMS"    "true"
  Option "PreferredMode" "3840x2160"
EndSection

Section "Device"
  Identifier "Nvidia"
  Driver "nvidia"
  Option "Monitor-DP-0" "DP-0"
  Option "Monitor-DP-6" "DP-6"
  Option "UseEDIDDpi"   "false"
  Option "DPI"          "192 x 192"
EndSection

Section "Screen"
  Identifier "Screen0"
  Device     "Nvidia"
  Monitor    "DP-0"
  Option     "UseEDIDDpi"   "false"
  Option     "DPI"          "192 x 192"
  Option     "Stereo" "0"
  Option     "nvidiaXineramaInfoOrder" "DP-0"
  Option     "metamodes" "DP-0: nvidia-auto-select +2160+0 {ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}, DP-6: nvidia-auto-select +0+0 {rotation=left, ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}"
  Option     "SLI" "Off"
  Option     "MultiGPU" "Off"
  Option     "BaseMosaic" "off"
  DefaultDepth 24
  SubSection "Display"
    Depth 24
    Modes "nvidia-auto-select"
  EndSubSection
EndSection

Offline

#6 2019-01-19 20:52:27

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,667

Re: [solved] nvidia: corrupted graphics after login

Because the xorg.conf explicitly creates these outputs and adds them to xrandr. Doesn't mean they exist.
Did you change *all* occurrences of DP-* ? (Including the metamodes line)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2019-01-19 20:56:36

Blume
Member
Registered: 2019-01-19
Posts: 8

Re: [solved] nvidia: corrupted graphics after login

Yes, I did change all occurrences.

xrandr -q lists my ports as DP-0 to DP-7, not DFP-0 to DFP-7. And my xorg.config does not mention those other DP-x.

PS: I forgot to mention: the metamode lines were created using by the nvidia-settings tool.

$ xrandr -q
Screen 0: minimum 8 x 8, current 6000 x 3840, maximum 32767 x 32767
DP-0 connected primary 3840x2160+2160+0 (normal left inverted right x axis y axis) 596mm x 335mm
   3840x2160     30.00*+
   2560x1600     59.97  
   2560x1440     59.95  
   1920x1080     60.00    59.94    50.00  
   1680x1050     59.95  
   1440x900      59.89  
   1440x576      50.00  
   1440x480      59.94  
   1280x1024     75.02    60.02  
   1280x960      60.00  
   1280x720      60.00    59.94    50.00  
   1152x864      75.00  
   1024x768      75.03    70.07    60.00  
   800x600       75.00    72.19    60.32    56.25  
   720x576       50.00  
   720x480       59.94  
   640x480       75.00    72.81    59.94    59.93  
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
DP-5 disconnected (normal left inverted right x axis y axis)
DP-6 connected 2160x3840+0+0 left (normal left inverted right x axis y axis) 596mm x 335mm
   3840x2160     60.00*+  30.00  
   2560x1440     59.95  
   1920x1080     60.00    59.94    50.00  
   1680x1050     59.95  
   1600x900      60.00  
   1280x1024     75.02    60.02  
   1280x800      59.81  
   1280x720      60.00    59.94    50.00  
   1024x768      75.03    60.00  
   800x600       75.00    60.32  
   720x576       50.00  
   720x480       59.94  
   640x480       75.00    59.94    59.93  
DP-7 disconnected (normal left inverted right x axis y axis)

Last edited by Blume (2019-01-19 20:57:47)

Offline

#8 2019-01-19 21:03:25

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,667

Re: [solved] nvidia: corrupted graphics after login

Even if you remove the xorg.conf?
Since you know your config causes this, try to dissect it by commenting some parts - I'd start w/ the monitor lines in the device section and the monitor and metamodes line in the screen section.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#9 2019-01-19 21:27:11

Blume
Member
Registered: 2019-01-19
Posts: 8

Re: [solved] nvidia: corrupted graphics after login

Yes, the monitor names are DP-x even without xorg.conf.

I have started dissecting my xorg.conf. The current working version is

Section "Monitor"
  Identifier "DP-0"
EndSection

Section "Monitor"
  Identifier "DP-6"
#  Option "LeftOf"  "DP-0"
#  Option "Rotate"  "left"
EndSection

Section "Device"
  Identifier "Nvidia"
  Driver "nvidia"
  Option "Monitor-DP-0" "DP-0"
  Option "Monitor-DP-6" "DP-6"
  Option "UseEDIDDpi"   "false"
  Option "DPI"          "192 x 192"
EndSection

Section "Screen"
  Identifier "Screen0"
  Device     "Nvidia"
  Monitor    "DP-0"
  Option     "UseEDIDDpi"   "false"
  Option     "DPI"          "192 x 192"
  Option     "Stereo" "0"
  Option     "SLI" "Off"
  Option     "MultiGPU" "Off"
  Option     "BaseMosaic" "off"
  DefaultDepth 24
  SubSection "Display"
    Depth 24
    Modes "nvidia-auto-select"
  EndSubSection
EndSection

The problem starts as soon as I uncomment the lines

#  Option "LeftOf"  "DP-0"
#  Option "Rotate"  "left"

in the definition of DP-6.

Any ideas?

Offline

#10 2019-01-19 21:51:19

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,667

Re: [solved] nvidia: corrupted graphics after login

No matter which of them?
Try kicking

Option "Monitor-DP-0" "DP-0"
Option "Monitor-DP-6" "DP-6"

Those should not be required.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#11 2019-01-19 21:59:04

Blume
Member
Registered: 2019-01-19
Posts: 8

Re: [solved] nvidia: corrupted graphics after login

The problem seems to be the Rotate option.

A minimal config that exhibits the problem is

Section "Monitor"
  Identifier "DP-0"
EndSection

Section "Monitor"
  Identifier "DP-6"
  Option "Rotate"  "left"
EndSection

Section "Device"
  Identifier "Nvidia"
  Driver "nvidia"
EndSection

Section "Screen"
  Identifier "Screen0"
  Device     "Nvidia"
  Monitor    "DP-0"
EndSection

If I comment out the line Option "Rotate"  "left" everything works.

Offline

#12 2019-01-19 22:09:32

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,667

Re: [solved] nvidia: corrupted graphics after login

Can you "xrandr --output DP-6 --rotate left"?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#13 2019-01-19 22:10:44

Blume
Member
Registered: 2019-01-19
Posts: 8

Re: [solved] nvidia: corrupted graphics after login

Yes.

Offline

#14 2019-01-20 13:18:45

Blume
Member
Registered: 2019-01-19
Posts: 8

Re: [solved] nvidia: corrupted graphics after login

After the update to nvidia 415.27 the problem disappeared. So it seems to have been a driver bug.

Offline

Pages: 1

Board footer

Powered by FluxBB