Arch Linux

morgan

Member

Registered: 2018-06-01

Posts: 1

Mouse teleporting on every click utilizing evdev to VM

I am trying to get a working GPU/PCI passthrough to VM setup working. I have been following https://wiki.archlinux.org/index.php/PC … _via_Evdev primarily.

I have gotten everything to work, except for one quirk. Every time I click the mouse in the VM/Windows guest, it teleports to the top left of my screen. Doesn't matter if it's a right click or a left click. Keyboard works as normal.

My steps to start the VM and get this behavior is what you'd expect:

* Boot the VM
* Switch my monitor to the VM input
* Activate evdev for my keyboard/mouse
* Click my mouse, it teleports.

I'm at a loss here, so i'm down to try anything.

Not sure if it's relevant, but i'm using two monitors. Both are being driven by an integrated Intel GPU when in linux,
and my primary monitor switches to the nvidia gpu when the VM is enabled. I pasted the gpu information below, just in case it's some weird monitor/resolution detection bug?

Or maybe a weird evdev config? Here's a bunch of configs that are probably relevant:

"grep "^[^#;]" /etc/libvirt/qemu.conf"
user = "morgan"
group = "root"
nvram = [
	"/usr/share/ovmf/x64/OVMF_CODE.fd:/usr/share/ovmf/x64/OVMF_VARS.fd"
]
cgroup_device_acl = [
    "/dev/kvm",
    "/dev/input/by-id/ckb-Corsair_K70R_Gaming_Keyboard_vKB_-event",
    "/dev/input/by-id/usb-Logitech_USB_Receiver-if01-event-mouse",
    "/dev/null", "/dev/full", "/dev/zero",
    "/dev/random", "/dev/urandom",
    "/dev/ptmx", "/dev/kvm", "/dev/kqemu",
    "/dev/rtc","/dev/hpet", "/dev/sev"
]

"sudo lshw -C display"
[sudo] password for morgan:
  *-display
       description: VGA compatible controller
       product: TU106 [GeForce RTX 2070]
       vendor: NVIDIA Corporation
       physical id: 0
       bus info: pci@0000:02:00.0
       version: a1
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress vga_controller cap_list rom
       configuration: driver=vfio-pci latency=0
       resources: irq:17 memory:de000000-deffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:e000(size=128) memory:df000000-df07ffff
  *-display
       description: VGA compatible controller
       product: HD Graphics 530
       vendor: Intel Corporation
       physical id: 2
       bus info: pci@0000:00:02.0
       version: 06
       width: 64 bits
       clock: 33MHz
       capabilities: pciexpress msi pm vga_controller bus_master cap_list rom
       configuration: driver=i915 latency=0
       resources: irq:134 memory:dd000000-ddffffff memory:b0000000-bfffffff ioport:f000(size=64) memory:c0000-dffff

"sudo virsh dumpxml games"
<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
  <name>games</name>
  <uuid>b1796e9f-d744-492f-b3b3-1736342b49d0</uuid>
  <metadata>
    <libosinfo:libosinfo xmlns:libosinfo="http://libosinfo.org/xmlns/libvirt/domain/1.0">
      <libosinfo:os id="http://microsoft.com/win/10"/>
    </libosinfo:libosinfo>
  </metadata>
  <memory unit='KiB'>6291456</memory>
  <currentMemory unit='KiB'>6291456</currentMemory>
  <vcpu placement='static'>4</vcpu>
  <os>
    <type arch='x86_64' machine='pc-q35-3.1'>hvm</type>
    <loader readonly='yes' type='pflash'>/usr/share/ovmf/x64/OVMF_CODE.fd</loader>
    <nvram>/var/lib/libvirt/qemu/nvram/games_VARS.fd</nvram>
    <boot dev='hd'/>
  </os>
  <features>
    <acpi/>
    <apic/>
    <hyperv>
      <relaxed state='on'/>
      <vapic state='on'/>
      <spinlocks state='on' retries='8191'/>
      <vendor_id state='on' value='mangosgpu420'/>
    </hyperv>
    <kvm>
      <hidden state='on'/>
    </kvm>
    <vmport state='off'/>
  </features>
  <cpu mode='host-model' check='partial'>
    <model fallback='allow'/>
  </cpu>
  <clock offset='localtime'>
    <timer name='rtc' tickpolicy='catchup'/>
    <timer name='pit' tickpolicy='delay'/>
    <timer name='hpet' present='no'/>
    <timer name='hypervclock' present='yes'/>
  </clock>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>destroy</on_crash>
  <pm>
    <suspend-to-mem enabled='no'/>
    <suspend-to-disk enabled='no'/>
  </pm>
  <devices>
    <emulator>/usr/bin/qemu-system-x86_64</emulator>
    <disk type='file' device='disk'>
      <driver name='qemu' type='qcow2'/>
      <source file='/var/lib/libvirt/images/games.qcow2'/>
      <target dev='sda' bus='sata'/>
      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
    </disk>
    <disk type='file' device='cdrom'>
      <driver name='qemu' type='raw'/>
      <source file='/home/morgan/Downloads/virtio-win-0.1.141.iso'/>
      <target dev='sdb' bus='sata'/>
      <readonly/>
      <address type='drive' controller='0' bus='0' target='0' unit='1'/>
    </disk>
    <controller type='usb' index='0' model='qemu-xhci' ports='15'>
      <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
    </controller>
    <controller type='sata' index='0'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/>
    </controller>
    <controller type='pci' index='0' model='pcie-root'/>
    <controller type='pci' index='1' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='1' port='0x10'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0' multifunction='on'/>
    </controller>
    <controller type='pci' index='2' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='2' port='0x11'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x1'/>
    </controller>
    <controller type='pci' index='3' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='3' port='0x12'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x2'/>
    </controller>
    <controller type='pci' index='4' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='4' port='0x13'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/>
    </controller>
    <controller type='pci' index='5' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='5' port='0x8'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0' multifunction='on'/>
    </controller>
    <controller type='pci' index='6' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='6' port='0x9'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
    </controller>
    <controller type='pci' index='7' model='pcie-root-port'>
      <model name='pcie-root-port'/>
      <target chassis='7' port='0xa'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
    </controller>
    <interface type='direct'>
      <mac address='52:54:00:37:42:1b'/>
      <source dev='enp0s31f6' mode='bridge'/>
      <model type='e1000e'/>
      <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
    </interface>
    <serial type='pty'>
      <target type='isa-serial' port='0'>
        <model name='isa-serial'/>
      </target>
    </serial>
    <console type='pty'>
      <target type='serial' port='0'/>
    </console>
    <input type='tablet' bus='usb'>
      <address type='usb' bus='0' port='1'/>
    </input>
    <input type='mouse' bus='virtio'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x0e' function='0x0'/>
    </input>
    <input type='keyboard' bus='virtio'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x0f' function='0x0'/>
    </input>
    <input type='mouse' bus='ps2'/>
    <input type='keyboard' bus='ps2'/>
    <sound model='ich9'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x1b' function='0x0'/>
    </sound>
    <hostdev mode='subsystem' type='pci' managed='yes'>
      <source>
        <address domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
      </source>
      <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/>
    </hostdev>
    <hostdev mode='subsystem' type='pci' managed='yes'>
      <source>
        <address domain='0x0000' bus='0x02' slot='0x00' function='0x1'/>
      </source>
      <address type='pci' domain='0x0000' bus='0x05' slot='0x00' function='0x0'/>
    </hostdev>
    <hostdev mode='subsystem' type='pci' managed='yes'>
      <source>
        <address domain='0x0000' bus='0x02' slot='0x00' function='0x2'/>
      </source>
      <address type='pci' domain='0x0000' bus='0x06' slot='0x00' function='0x0'/>
    </hostdev>
    <hostdev mode='subsystem' type='pci' managed='yes'>
      <source>
        <address domain='0x0000' bus='0x02' slot='0x00' function='0x3'/>
      </source>
      <address type='pci' domain='0x0000' bus='0x07' slot='0x00' function='0x0'/>
    </hostdev>
    <redirdev bus='usb' type='spicevmc'>
      <address type='usb' bus='0' port='2'/>
    </redirdev>
    <redirdev bus='usb' type='spicevmc'>
      <address type='usb' bus='0' port='3'/>
    </redirdev>
    <memballoon model='virtio'>
      <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/>
    </memballoon>
  </devices>
  <qemu:commandline>
    <qemu:arg value='-object'/>
    <qemu:arg value='input-linux,id=mouse1,evdev=/dev/input/by-id/usb-Logitech_USB_Receiver-if01-event-mouse'/>
    <qemu:arg value='-object'/>
    <qemu:arg value='input-linux,id=kbd1,evdev=/dev/input/by-id/ckb-Corsair_K70R_Gaming_Keyboard_vKB_-event,grab_all=on,repeat=on'/>
  </qemu:commandline>
</domain>

Last edited by morgan (2019-02-12 23:04:12)

jasonwryan

Anarchist

From: .nz

Registered: 2009-05-09

Posts: 30,424

Website

Re: Mouse teleporting on every click utilizing evdev to VM

Please use code, not quote, tags: https://wiki.archlinux.org/index.php/Co … s_and_code

---

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

KiuXEX

Member

Registered: 2020-06-21

Posts: 1

Re: Mouse teleporting on every click utilizing evdev to VM

I had this problem and seem to have solved it by adding a Generic USB Mouse to the domain hardware. I think qemu passes the mouse as PS/2 by default, and if you have one of those fancy mice with 50 buttons it just doesn't work right.

Before I did this, I did one boot with the mouse passed through directly to the VM so it could install the drivers - I don't know if that was necessary.

2ManyDogs

Forum Fellow

Registered: 2012-01-15

Posts: 4,645

Re: Mouse teleporting on every click utilizing evdev to VM

Closing this old topic.