You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2019-02-26 14:42:31
- woof
- Member
- Registered: 2019-02-26
- Posts: 8
[SOLVED]Monitor issues
Hello. I am having issues with my dual monitor setup. My secondary monitor {an old VGA acer with a resolution of 1280x1024} works perfectly fine, and for the first time it works under Arch when I reinstall {somebody installed Shindows on my box, also I lost my forum password and username, sigh} is recognized properly. But my primary monitor, a BenQ with a resolution of 1920x1080 doesn't think anything is happening. When I boot into a random Shindows install USB I made on my mom's laptop, the monitor works no problem. But under any form of Linux, it just doesn't turn on. I have made sure I have the correct input selected.
Here's my setup:
CPU: AMD Athlon X4 950 @Stock speeds
GPU: ASUS ROG whatever R7 370, again at stock
RAM: some random 2x4GB kit of DDR4-2400MHz
MOBO: ASUS Prime A320M-K
PSU: Corsair VS450
OS: Arch Linux with kernel 4.20.12-arch1-1-ARCH
GPU driver: latest amdgpu
Pls help thx
Last edited by woof (2019-02-26 19:53:02)
Offline
#2 2019-02-26 15:09:20
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,655
Re: [SOLVED]Monitor issues
console, x11 or wayland?
please post your xorg log, "lspci" and the output of "xrandr -q"
Offline
#3 2019-02-26 15:16:23
- woof
- Member
- Registered: 2019-02-26
- Posts: 8
Re: [SOLVED]Monitor issues
It happens in console, wayland and x11.
lspci says:
[stepan@Mys-CernaCita ~]$ lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Complex
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Host Bridge
00:02.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Port
00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Host Bridge
00:03.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Port
00:08.0 Encryption controller: Advanced Micro Devices, Inc. [AMD] Carrizo Platform Security Processor
00:09.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Carrizo Audio Dummy Host Bridge
00:09.2 Audio device: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Audio Controller
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 20)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 49)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 4a)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 5
01:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] Device 43bc (rev 02)
01:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] Device 43b8 (rev 02)
01:00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43b3 (rev 02)
02:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02)
02:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02)
02:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02)
02:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
07:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Curacao PRO [Radeon R7 370 / R9 270/370 OEM] (rev 81)
07:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]xrandr -q:
[stepan@Mys-CernaCita ~]$ xrandr -q
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 8192 x 8192
XWAYLAND0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 340mm x 270mm
1280x1024 59.89*+Gimme a sec, I'll try finding in the wiki where to find my xorg log cuz I forgot it lol
Offline
#4 2019-02-26 15:21:26
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,655
Re: [SOLVED]Monitor issues
This is a wayland session, your xorg log is (at this point) worthless.
Please actually try an xorg session.
Offline
#5 2019-02-26 15:26:22
- woof
- Member
- Registered: 2019-02-26
- Posts: 8
Re: [SOLVED]Monitor issues
ok I have started up the xorg session once again. Here are all the things once again:
lspci:
[stepan@Mys-CernaCita ~]$ lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Complex
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Host Bridge
00:02.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Port
00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Host Bridge
00:03.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Port
00:08.0 Encryption controller: Advanced Micro Devices, Inc. [AMD] Carrizo Platform Security Processor
00:09.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Carrizo Audio Dummy Host Bridge
00:09.2 Audio device: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Audio Controller
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 20)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 49)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 4a)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 5
01:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] Device 43bc (rev 02)
01:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] Device 43b8 (rev 02)
01:00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43b3 (rev 02)
02:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02)
02:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02)
02:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02)
02:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 300 Series Chipset PCIe Port (rev 02)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
07:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Curacao PRO [Radeon R7 370 / R9 270/370 OEM] (rev 81)
07:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]xrandr -q:
[stepan@Mys-CernaCita ~]$ xrandr -q
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 16384 x 16384
DP-1 connected primary 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
1280x1024 60.02*+ 75.02
1280x960 75.04 70.03 60.00
1280x800 59.97 59.81 59.91
1152x864 75.00 69.97 59.97
1280x720 59.99 59.86 59.74
1024x768 60.04 75.03 70.07 66.01 60.00
960x720 60.00
928x696 75.00 60.05
896x672 75.05 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
832x624 74.55
960x540 59.96 59.99 59.63 59.82
800x600 75.00 70.00 65.00 60.00 72.19 75.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 74.76 59.98
800x450 59.95 59.82
640x512 75.02 60.02
700x450 59.96 59.88
640x480 60.00 75.00 72.81 75.00 66.67 59.94
720x405 59.51 58.99
720x400 70.08
684x384 59.88 59.85
640x400 59.88 59.98
576x432 75.00
640x360 59.86 59.83 59.84 59.32
512x384 75.03 70.07 60.00
512x288 60.00 59.92
416x312 74.66
480x270 59.63 59.82
400x300 72.19 75.12 60.32 56.34
432x243 59.92 59.57
320x240 72.81 75.00 60.05
360x202 59.51 59.13
320x180 59.84 59.32
HDMI-1 disconnected (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
DVI-D-1 disconnected (normal left inverted right x axis y axis)and ~/.local/share/xorg/Xorg.0.log
[ 5369.012] (--) Log file renamed from "/home/stepan/.local/share/xorg/Xorg.pid-3807.log" to "/home/stepan/.local/share/xorg/Xorg.0.log"
[ 5369.013] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 5369.013]
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[ 5369.013] Build Operating System: Linux Arch Linux
[ 5369.013] Current Operating System: Linux Mys-CernaCita 4.20.12-arch1-1-ARCH #1 SMP PREEMPT Sat Feb 23 15:11:34 UTC 2019 x86_64
[ 5369.013] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=209c526b-ae10-4d79-ad91-a6b1a2856246 rw quiet
[ 5369.013] Build Date: 25 October 2018 04:42:32PM
[ 5369.013]
[ 5369.013] Current version of pixman: 0.38.0
[ 5369.013] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5369.013] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5369.013] (==) Log file: "/home/stepan/.local/share/xorg/Xorg.0.log", Time: Tue Feb 26 16:23:05 2019
[ 5369.014] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5369.016] (==) No Layout section. Using the first Screen section.
[ 5369.016] (==) No screen section available. Using defaults.
[ 5369.016] (**) |-->Screen "Default Screen Section" (0)
[ 5369.016] (**) | |-->Monitor "<default monitor>"
[ 5369.017] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5369.017] (==) Automatically adding devices
[ 5369.017] (==) Automatically enabling devices
[ 5369.017] (==) Automatically adding GPU devices
[ 5369.017] (==) Automatically binding GPU devices
[ 5369.017] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 5369.017] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 5369.017] Entry deleted from font path.
[ 5369.017] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[ 5369.017] Entry deleted from font path.
[ 5369.017] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 5369.017] Entry deleted from font path.
[ 5369.017] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 5369.017] Entry deleted from font path.
[ 5369.017] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 5369.017] Entry deleted from font path.
[ 5369.017] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 5369.017] Entry deleted from font path.
[ 5369.017] (==) FontPath set to:
[ 5369.017] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5369.017] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5369.017] (II) Module ABI versions:
[ 5369.017] X.Org ANSI C Emulation: 0.4
[ 5369.017] X.Org Video Driver: 24.0
[ 5369.017] X.Org XInput driver : 24.1
[ 5369.017] X.Org Server Extension : 10.0
[ 5369.018] (++) using VT number 2
[ 5369.021] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_311
[ 5369.022] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 5369.023] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 5369.030] (--) PCI:*(7@0:0:0) 1002:6811:1043:2015 rev 129, Mem @ 0xe0000000/268435456, 0xfe800000/262144, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 5369.030] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 5369.030] (II) LoadModule: "glx"
[ 5369.032] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5369.037] (II) Module glx: vendor="X.Org Foundation"
[ 5369.037] compiled for 1.20.3, module version = 1.0.0
[ 5369.037] ABI class: X.Org Server Extension, version 10.0
[ 5369.037] (==) Matched ati as autoconfigured driver 0
[ 5369.037] (==) Matched modesetting as autoconfigured driver 1
[ 5369.037] (==) Matched fbdev as autoconfigured driver 2
[ 5369.037] (==) Matched vesa as autoconfigured driver 3
[ 5369.037] (==) Assigned the driver to the xf86ConfigLayout
[ 5369.037] (II) LoadModule: "ati"
[ 5369.038] (WW) Warning, couldn't open module ati
[ 5369.038] (EE) Failed to load module "ati" (module does not exist, 0)
[ 5369.038] (II) LoadModule: "modesetting"
[ 5369.038] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5369.040] (II) Module modesetting: vendor="X.Org Foundation"
[ 5369.040] compiled for 1.20.3, module version = 1.20.3
[ 5369.040] Module class: X.Org Video Driver
[ 5369.040] ABI class: X.Org Video Driver, version 24.0
[ 5369.040] (II) LoadModule: "fbdev"
[ 5369.040] (WW) Warning, couldn't open module fbdev
[ 5369.040] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 5369.040] (II) LoadModule: "vesa"
[ 5369.040] (WW) Warning, couldn't open module vesa
[ 5369.040] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 5369.040] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5369.040] (II) modeset(0): using drv /dev/dri/card0
[ 5369.040] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 5369.040] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5369.040] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 5369.040] (==) modeset(0): RGB weight 888
[ 5369.040] (==) modeset(0): Default visual is TrueColor
[ 5369.041] (II) Loading sub module "glamoregl"
[ 5369.041] (II) LoadModule: "glamoregl"
[ 5369.041] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 5369.046] (II) Module glamoregl: vendor="X.Org Foundation"
[ 5369.046] compiled for 1.20.3, module version = 1.0.1
[ 5369.046] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5369.140] (II) modeset(0): glamor X acceleration enabled on AMD PITCAIRN (DRM 2.50.0, 4.20.12-arch1-1-ARCH, LLVM 7.0.1)
[ 5369.140] (II) modeset(0): glamor initialized
[ 5369.184] (II) modeset(0): Output DP-1 has no monitor section
[ 5369.186] (II) modeset(0): Output HDMI-1 has no monitor section
[ 5369.201] (II) modeset(0): Output DVI-I-1 has no monitor section
[ 5369.203] (II) modeset(0): Output DVI-D-1 has no monitor section
[ 5369.248] (II) modeset(0): EDID for output DP-1
[ 5369.248] (II) modeset(0): Manufacturer: ACR Model: ad60 Serial#: 1930442584
[ 5369.248] (II) modeset(0): Year: 2007 Week: 31
[ 5369.248] (II) modeset(0): EDID Version: 1.3
[ 5369.248] (II) modeset(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 5369.248] (II) modeset(0): Sync: Separate Composite
[ 5369.248] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 5369.248] (II) modeset(0): Gamma: 2.20
[ 5369.248] (II) modeset(0): DPMS capabilities: Off; RGB/Color Display
[ 5369.248] (II) modeset(0): First detailed timing is preferred mode
[ 5369.248] (II) modeset(0): redX: 0.634 redY: 0.354 greenX: 0.287 greenY: 0.621
[ 5369.248] (II) modeset(0): blueX: 0.138 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
[ 5369.248] (II) modeset(0): Supported established timings:
[ 5369.248] (II) modeset(0): 720x400@70Hz
[ 5369.248] (II) modeset(0): 640x480@60Hz
[ 5369.248] (II) modeset(0): 640x480@67Hz
[ 5369.248] (II) modeset(0): 640x480@72Hz
[ 5369.248] (II) modeset(0): 640x480@75Hz
[ 5369.248] (II) modeset(0): 800x600@56Hz
[ 5369.248] (II) modeset(0): 800x600@60Hz
[ 5369.248] (II) modeset(0): 800x600@72Hz
[ 5369.248] (II) modeset(0): 800x600@75Hz
[ 5369.248] (II) modeset(0): 832x624@75Hz
[ 5369.248] (II) modeset(0): 1024x768@60Hz
[ 5369.248] (II) modeset(0): 1024x768@70Hz
[ 5369.248] (II) modeset(0): 1024x768@75Hz
[ 5369.248] (II) modeset(0): 1280x1024@75Hz
[ 5369.248] (II) modeset(0): Manufacturer's mask: 0
[ 5369.248] (II) modeset(0): Supported standard timings:
[ 5369.248] (II) modeset(0): #0: hsize: 1024 vsize 768 refresh: 66 vid: 18017
[ 5369.248] (II) modeset(0): #1: hsize: 1152 vsize 864 refresh: 60 vid: 16497
[ 5369.248] (II) modeset(0): #2: hsize: 1152 vsize 864 refresh: 70 vid: 19057
[ 5369.248] (II) modeset(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 5369.248] (II) modeset(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 5369.248] (II) modeset(0): #5: hsize: 1280 vsize 960 refresh: 70 vid: 19073
[ 5369.248] (II) modeset(0): #6: hsize: 1280 vsize 960 refresh: 75 vid: 20353
[ 5369.248] (II) modeset(0): #7: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 5369.248] (II) modeset(0): Supported detailed timing:
[ 5369.248] (II) modeset(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 5369.248] (II) modeset(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 5369.248] (II) modeset(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 5369.248] (II) modeset(0): Ranges: V min: 49 V max: 75 Hz, H min: 24 H max: 80 kHz, PixClock max 145 MHz
[ 5369.248] (II) modeset(0): Monitor name: Acer AL1717
[ 5369.248] (II) modeset(0): Serial No: L6002332414G
[ 5369.248] (II) modeset(0): EDID (in hex):
[ 5369.248] (II) modeset(0): 00ffffffffffff00047260ad58371073
[ 5369.248] (II) modeset(0): 1f1101036c221b782a6875a25a499f23
[ 5369.248] (II) modeset(0): 135054bfef0061467140714a714f8140
[ 5369.248] (II) modeset(0): 814a814f8180302a009851002a403070
[ 5369.248] (II) modeset(0): 1300520e1100001e000000fd00314b18
[ 5369.248] (II) modeset(0): 500e000a202020202020000000fc0041
[ 5369.248] (II) modeset(0): 63657220414c313731370a20000000ff
[ 5369.248] (II) modeset(0): 004c36303032333332343134470a001e
[ 5369.249] (II) modeset(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[ 5369.249] (II) modeset(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[ 5369.249] (II) modeset(0): Not using default mode "1280x720" (bad mode clock/interlace/doublescan)
[ 5369.249] (II) modeset(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan)
[ 5369.249] (II) modeset(0): Printing probed modes for output DP-1
[ 5369.249] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 5369.249] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 5369.249] (II) modeset(0): Modeline "1280x960"x75.0 129.94 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.2 kHz)
[ 5369.249] (II) modeset(0): Modeline "1280x960"x70.0 120.90 1280 1368 1504 1728 960 961 964 999 -hsync +vsync (70.0 kHz)
[ 5369.249] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 5369.249] (II) modeset(0): Modeline "1280x800"x60.0 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[ 5369.249] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d)
[ 5369.249] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d)
[ 5369.249] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 5369.249] (II) modeset(0): Modeline "1152x864"x70.0 96.73 1152 1224 1344 1536 864 865 868 900 -hsync +vsync (63.0 kHz)
[ 5369.249] (II) modeset(0): Modeline "1152x864"x60.0 81.58 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
[ 5369.249] (II) modeset(0): Modeline "1280x720"x60.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 5369.249] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 5369.249] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 5369.249] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 5369.249] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 5369.249] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 5369.249] (II) modeset(0): Modeline "1024x768"x66.0 71.64 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz)
[ 5369.249] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 5369.249] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 5369.249] (II) modeset(0): Modeline "928x696"x75.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[ 5369.249] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 5369.249] (II) modeset(0): Modeline "896x672"x75.0 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[ 5369.249] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 5369.249] (II) modeset(0): Modeline "1024x576"x60.0 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 5369.249] (II) modeset(0): Modeline "1024x576"x60.0 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 5369.249] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 5369.249] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 5369.249] (II) modeset(0): Modeline "960x600"x59.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 5369.249] (II) modeset(0): Modeline "960x600"x60.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 5369.249] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 5369.249] (II) modeset(0): Modeline "960x540"x60.0 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 5369.249] (II) modeset(0): Modeline "960x540"x60.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 5369.249] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 5369.249] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 5369.249] (II) modeset(0): Modeline "800x600"x75.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[ 5369.249] (II) modeset(0): Modeline "800x600"x70.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[ 5369.249] (II) modeset(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[ 5369.249] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 5369.249] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 5369.249] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 5369.249] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 5369.249] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 5369.249] (II) modeset(0): Modeline "840x525"x60.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 5369.249] (II) modeset(0): Modeline "840x525"x59.9 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 5369.249] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 5369.249] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 5369.249] (II) modeset(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[ 5369.249] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 5369.250] (II) modeset(0): Modeline "800x450"x59.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 5369.250] (II) modeset(0): Modeline "800x450"x59.8 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 5369.250] (II) modeset(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[ 5369.250] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 5369.250] (II) modeset(0): Modeline "700x450"x60.0 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 5369.250] (II) modeset(0): Modeline "700x450"x59.9 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 5369.250] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 5369.250] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 5369.250] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 5369.250] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
[ 5369.250] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 5369.250] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 5369.250] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 5369.250] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 5369.250] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 5369.250] (II) modeset(0): Modeline "684x384"x59.9 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 5369.250] (II) modeset(0): Modeline "684x384"x59.9 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 5369.250] (II) modeset(0): Modeline "640x400"x59.9 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 5369.250] (II) modeset(0): Modeline "640x400"x60.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 5369.250] (II) modeset(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[ 5369.250] (II) modeset(0): Modeline "640x360"x59.9 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 5369.250] (II) modeset(0): Modeline "640x360"x59.8 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 5369.250] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 5369.250] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 5369.250] (II) modeset(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[ 5369.250] (II) modeset(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[ 5369.250] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 5369.250] (II) modeset(0): Modeline "512x288"x60.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 5369.250] (II) modeset(0): Modeline "512x288"x59.9 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 5369.250] (II) modeset(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[ 5369.250] (II) modeset(0): Modeline "480x270"x59.6 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 5369.250] (II) modeset(0): Modeline "480x270"x59.8 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 5369.250] (II) modeset(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[ 5369.250] (II) modeset(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[ 5369.250] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 5369.250] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 5369.250] (II) modeset(0): Modeline "432x243"x59.9 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 5369.250] (II) modeset(0): Modeline "432x243"x59.6 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 5369.250] (II) modeset(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[ 5369.250] (II) modeset(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[ 5369.250] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 5369.250] (II) modeset(0): Modeline "360x202"x59.5 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 5369.250] (II) modeset(0): Modeline "360x202"x59.1 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 5369.250] (II) modeset(0): Modeline "320x180"x59.8 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 5369.250] (II) modeset(0): Modeline "320x180"x59.3 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 5369.251] (II) modeset(0): EDID for output HDMI-1
[ 5369.264] (II) modeset(0): EDID for output DVI-I-1
[ 5369.266] (II) modeset(0): EDID for output DVI-D-1
[ 5369.266] (II) modeset(0): Output DP-1 connected
[ 5369.266] (II) modeset(0): Output HDMI-1 disconnected
[ 5369.266] (II) modeset(0): Output DVI-I-1 disconnected
[ 5369.266] (II) modeset(0): Output DVI-D-1 disconnected
[ 5369.266] (II) modeset(0): Using exact sizes for initial modes
[ 5369.266] (II) modeset(0): Output DP-1 using initial mode 1280x1024 +0+0
[ 5369.266] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 5369.266] (==) modeset(0): DPI set to (96, 96)
[ 5369.266] (II) Loading sub module "fb"
[ 5369.266] (II) LoadModule: "fb"
[ 5369.266] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5369.269] (II) Module fb: vendor="X.Org Foundation"
[ 5369.269] compiled for 1.20.3, module version = 1.0.0
[ 5369.269] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5369.276] (==) modeset(0): Backing store enabled
[ 5369.276] (==) modeset(0): Silken mouse disabled
[ 5369.277] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 5369.278] (==) modeset(0): DPMS enabled
[ 5369.278] (II) modeset(0): [DRI2] Setup complete
[ 5369.278] (II) modeset(0): [DRI2] DRI driver: radeonsi
[ 5369.278] (II) modeset(0): [DRI2] VDPAU driver: radeonsi
[ 5369.278] (II) Initializing extension Generic Event Extension
[ 5369.278] (II) Initializing extension SHAPE
[ 5369.278] (II) Initializing extension MIT-SHM
[ 5369.278] (II) Initializing extension XInputExtension
[ 5369.278] (II) Initializing extension XTEST
[ 5369.278] (II) Initializing extension BIG-REQUESTS
[ 5369.278] (II) Initializing extension SYNC
[ 5369.278] (II) Initializing extension XKEYBOARD
[ 5369.278] (II) Initializing extension XC-MISC
[ 5369.278] (II) Initializing extension SECURITY
[ 5369.278] (II) Initializing extension XFIXES
[ 5369.278] (II) Initializing extension RENDER
[ 5369.278] (II) Initializing extension RANDR
[ 5369.278] (II) Initializing extension COMPOSITE
[ 5369.278] (II) Initializing extension DAMAGE
[ 5369.278] (II) Initializing extension MIT-SCREEN-SAVER
[ 5369.278] (II) Initializing extension DOUBLE-BUFFER
[ 5369.279] (II) Initializing extension RECORD
[ 5369.279] (II) Initializing extension DPMS
[ 5369.279] (II) Initializing extension Present
[ 5369.279] (II) Initializing extension DRI3
[ 5369.279] (II) Initializing extension X-Resource
[ 5369.279] (II) Initializing extension XVideo
[ 5369.279] (II) Initializing extension XVideo-MotionCompensation
[ 5369.279] (II) Initializing extension GLX
[ 5369.288] (II) AIGLX: Loaded and initialized radeonsi
[ 5369.288] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5369.288] (II) Initializing extension XFree86-VidModeExtension
[ 5369.288] (II) Initializing extension XFree86-DGA
[ 5369.288] (II) Initializing extension XFree86-DRI
[ 5369.288] (II) Initializing extension DRI2
[ 5369.289] (II) modeset(0): Damage tracking initialized
[ 5369.289] (II) modeset(0): Setting screen physical size to 338 x 270
[ 5369.352] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 5369.352] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 5369.352] (II) LoadModule: "libinput"
[ 5369.352] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 5369.356] (II) Module libinput: vendor="X.Org Foundation"
[ 5369.356] compiled for 1.20.3, module version = 0.28.2
[ 5369.356] Module class: X.Org XInput Driver
[ 5369.356] ABI class: X.Org XInput driver, version 24.1
[ 5369.356] (II) Using input driver 'libinput' for 'Power Button'
[ 5369.357] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 18 paused 0
[ 5369.358] (**) Power Button: always reports core events
[ 5369.358] (**) Option "Device" "/dev/input/event1"
[ 5369.358] (**) Option "_source" "server/udev"
[ 5369.359] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 5369.359] (II) event1 - Power Button: device is a keyboard
[ 5369.359] (II) event1 - Power Button: device removed
[ 5369.359] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 5369.359] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5369.361] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 5369.361] (II) event1 - Power Button: device is a keyboard
[ 5369.361] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 5369.361] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 5369.361] (II) Using input driver 'libinput' for 'Video Bus'
[ 5369.362] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 21 paused 0
[ 5369.363] (**) Video Bus: always reports core events
[ 5369.363] (**) Option "Device" "/dev/input/event2"
[ 5369.363] (**) Option "_source" "server/udev"
[ 5369.364] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 5369.364] (II) event2 - Video Bus: device is a keyboard
[ 5369.364] (II) event2 - Video Bus: device removed
[ 5369.364] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input2/event2"
[ 5369.364] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 5369.366] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 5369.366] (II) event2 - Video Bus: device is a keyboard
[ 5369.366] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 5369.366] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 5369.366] (II) Using input driver 'libinput' for 'Power Button'
[ 5369.368] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 22 paused 0
[ 5369.368] (**) Power Button: always reports core events
[ 5369.368] (**) Option "Device" "/dev/input/event0"
[ 5369.368] (**) Option "_source" "server/udev"
[ 5369.369] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 5369.369] (II) event0 - Power Button: device is a keyboard
[ 5369.369] (II) event0 - Power Button: device removed
[ 5369.369] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 5369.369] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 5369.370] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 5369.370] (II) event0 - Power Button: device is a keyboard
[ 5369.371] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event17)
[ 5369.371] (II) No input driver specified, ignoring this device.
[ 5369.371] (II) This device may have been added with another device file.
[ 5369.371] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event18)
[ 5369.371] (II) No input driver specified, ignoring this device.
[ 5369.371] (II) This device may have been added with another device file.
[ 5369.372] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event19)
[ 5369.372] (II) No input driver specified, ignoring this device.
[ 5369.372] (II) This device may have been added with another device file.
[ 5369.372] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event20)
[ 5369.372] (II) No input driver specified, ignoring this device.
[ 5369.372] (II) This device may have been added with another device file.
[ 5369.373] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event21)
[ 5369.373] (II) No input driver specified, ignoring this device.
[ 5369.373] (II) This device may have been added with another device file.
[ 5369.373] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event22)
[ 5369.373] (II) No input driver specified, ignoring this device.
[ 5369.373] (II) This device may have been added with another device file.
[ 5369.374] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event12)
[ 5369.374] (II) No input driver specified, ignoring this device.
[ 5369.374] (II) This device may have been added with another device file.
[ 5369.374] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event13)
[ 5369.374] (II) No input driver specified, ignoring this device.
[ 5369.374] (II) This device may have been added with another device file.
[ 5369.375] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event14)
[ 5369.375] (II) No input driver specified, ignoring this device.
[ 5369.375] (II) This device may have been added with another device file.
[ 5369.375] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event15)
[ 5369.375] (II) No input driver specified, ignoring this device.
[ 5369.375] (II) This device may have been added with another device file.
[ 5369.376] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event16)
[ 5369.376] (II) No input driver specified, ignoring this device.
[ 5369.376] (II) This device may have been added with another device file.
[ 5369.376] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[ 5369.376] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[ 5369.376] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 5369.378] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 23 paused 0
[ 5369.378] (**) Logitech USB Receiver: always reports core events
[ 5369.378] (**) Option "Device" "/dev/input/event3"
[ 5369.378] (**) Option "_source" "server/udev"
[ 5369.380] (II) event3 - Logitech USB Receiver: is tagged by udev as: Keyboard
[ 5369.380] (II) event3 - Logitech USB Receiver: device is a keyboard
[ 5369.380] (II) event3 - Logitech USB Receiver: device removed
[ 5369.380] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C534.0001/input/input3/event3"
[ 5369.380] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 5369.382] (II) event3 - Logitech USB Receiver: is tagged by udev as: Keyboard
[ 5369.382] (II) event3 - Logitech USB Receiver: device is a keyboard
[ 5369.383] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/event4)
[ 5369.383] (**) Logitech USB Receiver Mouse: Applying InputClass "libinput pointer catchall"
[ 5369.383] (II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse'
[ 5369.385] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 24 paused 0
[ 5369.385] (**) Logitech USB Receiver Mouse: always reports core events
[ 5369.385] (**) Option "Device" "/dev/input/event4"
[ 5369.385] (**) Option "_source" "server/udev"
[ 5369.388] (II) event4 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[ 5369.388] (II) event4 - Logitech USB Receiver Mouse: device is a pointer
[ 5369.388] (II) event4 - Logitech USB Receiver Mouse: device removed
[ 5369.388] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C534.0002/input/input4/event4"
[ 5369.388] (II) XINPUT: Adding extended input device "Logitech USB Receiver Mouse" (type: MOUSE, id 10)
[ 5369.388] (**) Option "AccelerationScheme" "none"
[ 5369.388] (**) Logitech USB Receiver Mouse: (accel) selected scheme none/0
[ 5369.388] (**) Logitech USB Receiver Mouse: (accel) acceleration factor: 2.000
[ 5369.388] (**) Logitech USB Receiver Mouse: (accel) acceleration threshold: 4
[ 5369.391] (II) event4 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[ 5369.391] (II) event4 - Logitech USB Receiver Mouse: device is a pointer
[ 5369.392] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/mouse0)
[ 5369.392] (II) No input driver specified, ignoring this device.
[ 5369.393] (II) This device may have been added with another device file.
[ 5369.394] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event5)
[ 5369.394] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 5369.394] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 5369.395] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 25 paused 0
[ 5369.395] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 5369.395] (**) Option "Device" "/dev/input/event5"
[ 5369.395] (**) Option "_source" "server/udev"
[ 5369.398] (II) event5 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 5369.398] (II) event5 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 5369.398] (II) event5 - Logitech USB Receiver Consumer Control: device removed
[ 5369.398] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice
[ 5369.398] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C534.0002/input/input5/event5"
[ 5369.398] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 11)
[ 5369.398] (**) Option "AccelerationScheme" "none"
[ 5369.398] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0
[ 5369.398] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000
[ 5369.398] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4
[ 5369.400] (II) event5 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 5369.400] (II) event5 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 5369.401] (II) config/udev: Adding input device Logitech USB Receiver System Control (/dev/input/event6)
[ 5369.401] (**) Logitech USB Receiver System Control: Applying InputClass "libinput keyboard catchall"
[ 5369.401] (II) Using input driver 'libinput' for 'Logitech USB Receiver System Control'
[ 5369.402] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 26 paused 0
[ 5369.402] (**) Logitech USB Receiver System Control: always reports core events
[ 5369.402] (**) Option "Device" "/dev/input/event6"
[ 5369.402] (**) Option "_source" "server/udev"
[ 5369.405] (II) event6 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[ 5369.405] (II) event6 - Logitech USB Receiver System Control: device is a keyboard
[ 5369.405] (II) event6 - Logitech USB Receiver System Control: device removed
[ 5369.405] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C534.0002/input/input6/event6"
[ 5369.405] (II) XINPUT: Adding extended input device "Logitech USB Receiver System Control" (type: KEYBOARD, id 12)
[ 5369.407] (II) event6 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[ 5369.407] (II) event6 - Logitech USB Receiver System Control: device is a keyboard
[ 5369.408] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event7)
[ 5369.408] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[ 5369.408] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 5369.410] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 27 paused 0
[ 5369.410] (**) Logitech USB Receiver: always reports core events
[ 5369.410] (**) Option "Device" "/dev/input/event7"
[ 5369.410] (**) Option "_source" "server/udev"
[ 5369.412] (II) event7 - Logitech USB Receiver: is tagged by udev as: Keyboard
[ 5369.412] (II) event7 - Logitech USB Receiver: device is a keyboard
[ 5369.412] (II) event7 - Logitech USB Receiver: device removed
[ 5369.412] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C534.0003/input/input9/event7"
[ 5369.412] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 13)
[ 5369.414] (II) event7 - Logitech USB Receiver: is tagged by udev as: Keyboard
[ 5369.414] (II) event7 - Logitech USB Receiver: device is a keyboard
[ 5369.415] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/event8)
[ 5369.415] (**) Logitech USB Receiver Mouse: Applying InputClass "libinput pointer catchall"
[ 5369.415] (II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse'
[ 5369.416] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 28 paused 0
[ 5369.416] (**) Logitech USB Receiver Mouse: always reports core events
[ 5369.417] (**) Option "Device" "/dev/input/event8"
[ 5369.417] (**) Option "_source" "server/udev"
[ 5369.419] (II) event8 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[ 5369.419] (II) event8 - Logitech USB Receiver Mouse: device is a pointer
[ 5369.419] (II) event8 - Logitech USB Receiver Mouse: device removed
[ 5369.419] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C534.0004/input/input10/event8"
[ 5369.419] (II) XINPUT: Adding extended input device "Logitech USB Receiver Mouse" (type: MOUSE, id 14)
[ 5369.420] (**) Option "AccelerationScheme" "none"
[ 5369.420] (**) Logitech USB Receiver Mouse: (accel) selected scheme none/0
[ 5369.420] (**) Logitech USB Receiver Mouse: (accel) acceleration factor: 2.000
[ 5369.420] (**) Logitech USB Receiver Mouse: (accel) acceleration threshold: 4
[ 5369.422] (II) event8 - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[ 5369.422] (II) event8 - Logitech USB Receiver Mouse: device is a pointer
[ 5369.423] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/mouse1)
[ 5369.423] (II) No input driver specified, ignoring this device.
[ 5369.423] (II) This device may have been added with another device file.
[ 5369.424] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event9)
[ 5369.424] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 5369.424] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 5369.425] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 29 paused 0
[ 5369.425] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 5369.425] (**) Option "Device" "/dev/input/event9"
[ 5369.425] (**) Option "_source" "server/udev"
[ 5369.428] (II) event9 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 5369.428] (II) event9 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 5369.428] (II) event9 - Logitech USB Receiver Consumer Control: device removed
[ 5369.428] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice
[ 5369.428] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C534.0004/input/input11/event9"
[ 5369.428] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 15)
[ 5369.428] (**) Option "AccelerationScheme" "none"
[ 5369.428] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0
[ 5369.428] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000
[ 5369.428] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4
[ 5369.430] (II) event9 - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[ 5369.430] (II) event9 - Logitech USB Receiver Consumer Control: device is a keyboard
[ 5369.431] (II) config/udev: Adding input device Logitech USB Receiver System Control (/dev/input/event10)
[ 5369.431] (**) Logitech USB Receiver System Control: Applying InputClass "libinput keyboard catchall"
[ 5369.431] (II) Using input driver 'libinput' for 'Logitech USB Receiver System Control'
[ 5369.432] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 30 paused 0
[ 5369.432] (**) Logitech USB Receiver System Control: always reports core events
[ 5369.432] (**) Option "Device" "/dev/input/event10"
[ 5369.432] (**) Option "_source" "server/udev"
[ 5369.434] (II) event10 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[ 5369.434] (II) event10 - Logitech USB Receiver System Control: device is a keyboard
[ 5369.434] (II) event10 - Logitech USB Receiver System Control: device removed
[ 5369.434] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C534.0004/input/input12/event10"
[ 5369.434] (II) XINPUT: Adding extended input device "Logitech USB Receiver System Control" (type: KEYBOARD, id 16)
[ 5369.436] (II) event10 - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[ 5369.436] (II) event10 - Logitech USB Receiver System Control: device is a keyboard
[ 5369.437] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event23)
[ 5369.437] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 5369.437] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[ 5369.438] (II) systemd-logind: got fd for /dev/input/event23 13:87 fd 31 paused 0
[ 5369.438] (**) Eee PC WMI hotkeys: always reports core events
[ 5369.438] (**) Option "Device" "/dev/input/event23"
[ 5369.438] (**) Option "_source" "server/udev"
[ 5369.439] (II) event23 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 5369.439] (II) event23 - Eee PC WMI hotkeys: device is a keyboard
[ 5369.440] (II) event23 - Eee PC WMI hotkeys: device removed
[ 5369.440] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input27/event23"
[ 5369.440] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 17)
[ 5369.441] (II) event23 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 5369.441] (II) event23 - Eee PC WMI hotkeys: device is a keyboard
[ 5369.441] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[ 5369.441] (II) No input driver specified, ignoring this device.
[ 5369.441] (II) This device may have been added with another device file.
[ 5369.446] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 5369.446] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 5369.446] (II) systemd-logind: returning pre-existing fd for /dev/input/event5 13:69
[ 5369.446] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 5369.446] (**) Option "Device" "/dev/input/event5"
[ 5369.446] (**) Option "_source" "_driver/libinput"
[ 5369.446] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice
[ 5369.446] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C534.0002/input/input5/event5"
[ 5369.447] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 18)
[ 5369.447] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 5369.447] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[ 5369.447] (II) systemd-logind: returning pre-existing fd for /dev/input/event9 13:73
[ 5369.447] (**) Logitech USB Receiver Consumer Control: always reports core events
[ 5369.447] (**) Option "Device" "/dev/input/event9"
[ 5369.447] (**) Option "_source" "_driver/libinput"
[ 5369.447] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice
[ 5369.447] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C534.0004/input/input11/event9"
[ 5369.447] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 19)
[ 5369.887] (II) modeset(0): EDID vendor "ACR", prod id 44384
[ 5369.887] (II) modeset(0): Using EDID range info for horizontal sync
[ 5369.887] (II) modeset(0): Using EDID range info for vertical refresh
[ 5369.887] (II) modeset(0): Printing DDC gathered Modelines:
[ 5369.887] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 5369.887] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 5369.887] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 5369.887] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 5369.887] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 5369.887] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 5369.887] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 5369.887] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 5369.887] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 5369.887] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 5369.887] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 5369.888] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 5369.888] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 5369.888] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 5369.888] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 5369.888] (II) modeset(0): Modeline "1024x768"x66.0 71.63 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz e)
[ 5369.888] (II) modeset(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz e)
[ 5369.888] (II) modeset(0): Modeline "1152x864"x70.0 96.77 1152 1224 1344 1536 864 865 868 900 -hsync +vsync (63.0 kHz e)
[ 5369.888] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 5369.888] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 5369.888] (II) modeset(0): Modeline "1280x960"x70.0 120.84 1280 1368 1504 1728 960 961 964 999 -hsync +vsync (69.9 kHz e)
[ 5369.888] (II) modeset(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz e)
[ 5486.548] (II) modeset(0): EDID vendor "ACR", prod id 44384
[ 5486.548] (II) modeset(0): Using hsync ranges from config file
[ 5486.548] (II) modeset(0): Using vrefresh ranges from config file
[ 5486.548] (II) modeset(0): Printing DDC gathered Modelines:
[ 5486.548] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 5486.548] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 5486.548] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 5486.548] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 5486.548] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 5486.548] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 5486.548] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 5486.548] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 5486.548] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 5486.548] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 5486.548] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 5486.548] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 5486.548] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 5486.548] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 5486.548] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 5486.548] (II) modeset(0): Modeline "1024x768"x66.0 71.63 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz e)
[ 5486.548] (II) modeset(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz e)
[ 5486.548] (II) modeset(0): Modeline "1152x864"x70.0 96.77 1152 1224 1344 1536 864 865 868 900 -hsync +vsync (63.0 kHz e)
[ 5486.548] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 5486.548] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 5486.548] (II) modeset(0): Modeline "1280x960"x70.0 120.84 1280 1368 1504 1728 960 961 964 999 -hsync +vsync (69.9 kHz e)
[ 5486.548] (II) modeset(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz e)Offline
#6 2019-02-26 15:46:30
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,655
Re: [SOLVED]Monitor issues
There's no indication for other devices, is this a HDMI connection?
Try rebooting w/ "amdgpu.dc=0 amdgpu.audio=0 amdgpu.dpm=0 amdgpu.aspm=0 amdgpu.runpm=0 amdgpu.bapm=0", https://wiki.archlinux.org/index.php/Ke … le_options and post a complete dmesg.
Offline
#7 2019-02-26 15:48:38
- woof
- Member
- Registered: 2019-02-26
- Posts: 8
Re: [SOLVED]Monitor issues
Yes, it is an HDMI connection. Working on the other things...
Offline
#8 2019-02-26 15:58:32
- woof
- Member
- Registered: 2019-02-26
- Posts: 8
Re: [SOLVED]Monitor issues
Ok, here is the dmesg
[ 0.000000] Linux version 4.20.12-arch1-1-ARCH (builduser@heftig-2027) (gcc version 8.2.1 20181127 (GCC)) #1 SMP PREEMPT Sat Feb 23 15:11:34 UTC 2019
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=209c526b-ae10-4d79-ad91-a6b1a2856246 rw quiet amdgpu.dc=0 amdgpu.audio=0 amdgpu.dpm=0 amdgpu.aspm=0 amdgpu.runpm=0 amdgpu.bapm=0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000008ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x0000000000090fff] type 20
[ 0.000000] BIOS-e820: [mem 0x0000000000091000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d37f2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d37f3000-0x00000000d381cfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d381d000-0x00000000da563fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da564000-0x00000000da69ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da6a0000-0x00000000da6c7fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000da6c8000-0x00000000daac0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000daac1000-0x00000000dab73fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dab74000-0x00000000db470fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000db471000-0x00000000db511fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000db512000-0x00000000ddffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de000000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe400000-0x00000000fe4fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc0000-0x00000000fedc0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedc8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.60 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xd37f3000 ACPI=0xd37f3000 SMBIOS=0xdb3dd000 SMBIOS 3.0=0xdb3dc000 ESRT=0xd7ee8998 MEMATTR=0xd7f36018
[ 0.000000] SMBIOS 3.1.1 present.
[ 0.000000] DMI: System manufacturer System Product Name/PRIME A320M-K, BIOS 4207 12/07/2018
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3493.698 MHz processor
[ 0.000232] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000234] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000242] last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.000247] MTRR default type: uncachable
[ 0.000248] MTRR fixed ranges enabled:
[ 0.000250] 00000-9FFFF write-back
[ 0.000250] A0000-BFFFF write-through
[ 0.000251] C0000-DFFFF uncachable
[ 0.000252] E0000-FFFFF write-protect
[ 0.000253] MTRR variable ranges enabled:
[ 0.000254] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000255] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000256] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000257] 3 disabled
[ 0.000257] 4 disabled
[ 0.000258] 5 disabled
[ 0.000258] 6 disabled
[ 0.000258] 7 disabled
[ 0.000259] TOM2: 000000021f000000 aka 8688M
[ 0.000486] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000627] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000641] last_pfn = 0xde000 max_arch_pfn = 0x400000000
[ 0.005069] esrt: Reserving ESRT space from 0x00000000d7ee8998 to 0x00000000d7ee89d0.
[ 0.005082] check: Scanning 1 areas for low memory corruption
[ 0.005084] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[ 0.005089] Using GB pages for direct mapping
[ 0.005091] BRK [0x5f801000, 0x5f801fff] PGTABLE
[ 0.005093] BRK [0x5f802000, 0x5f802fff] PGTABLE
[ 0.005093] BRK [0x5f803000, 0x5f803fff] PGTABLE
[ 0.005112] BRK [0x5f804000, 0x5f804fff] PGTABLE
[ 0.005113] BRK [0x5f805000, 0x5f805fff] PGTABLE
[ 0.005299] BRK [0x5f806000, 0x5f806fff] PGTABLE
[ 0.005373] BRK [0x5f807000, 0x5f807fff] PGTABLE
[ 0.005429] BRK [0x5f808000, 0x5f808fff] PGTABLE
[ 0.005500] BRK [0x5f809000, 0x5f809fff] PGTABLE
[ 0.005573] BRK [0x5f80a000, 0x5f80afff] PGTABLE
[ 0.005648] Secure boot could not be determined
[ 0.005649] RAMDISK: [mem 0x36e3d000-0x37715fff]
[ 0.005656] ACPI: Early table checksum verification disabled
[ 0.005660] ACPI: RSDP 0x00000000D37F3000 000024 (v02 ALASKA)
[ 0.005663] ACPI: XSDT 0x00000000D37F30A0 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.005669] ACPI: FACP 0x00000000D37FF7C0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.005673] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20181003/tbfadt-624)
[ 0.005677] ACPI: DSDT 0x00000000D37F31E8 00C5D6 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.005680] ACPI: FACS 0x00000000DAB5FD80 000040
[ 0.005682] ACPI: APIC 0x00000000D37FF8D8 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.005684] ACPI: FPDT 0x00000000D37FF9B8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.005686] ACPI: FIDT 0x00000000D37FFA00 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.005689] ACPI: SSDT 0x00000000D381C920 0000BF (v01 AMD AMD PT 00001000 INTL 20120913)
[ 0.005691] ACPI: MCFG 0x00000000D37FFAF8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.005693] ACPI: HPET 0x00000000D37FFB38 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.005696] ACPI: UEFI 0x00000000D37FFB70 000042 (v01 00000000 00000000)
[ 0.005698] ACPI: SSDT 0x00000000D37FFBB8 00888F (v02 AMD AGESA 00000002 MSFT 04000000)
[ 0.005700] ACPI: VFCT 0x00000000D3808448 010084 (v01 ALASKA A M I 00000001 AMD 31504F47)
[ 0.005702] ACPI: BGRT 0x00000000D38184D0 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.005705] ACPI: SSDT 0x00000000D3818508 000D44 (v01 AMD AMD CPU 00000001 AMD 00000001)
[ 0.005707] ACPI: CRAT 0x00000000D3819250 0004D8 (v01 AMD AMD CRAT 00000001 AMD 00000001)
[ 0.005709] ACPI: CDIT 0x00000000D3819728 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
[ 0.005711] ACPI: SSDT 0x00000000D3819758 000050 (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.005713] ACPI: SSDT 0x00000000D38197A8 0010F5 (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.005716] ACPI: SSDT 0x00000000D381A8A0 00052C (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.005718] ACPI: SSDT 0x00000000D381ADD0 001B4E (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.005727] ACPI: Local APIC address 0xfee00000
[ 0.005828] No NUMA configuration found
[ 0.005829] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.005833] NODE_DATA(0) allocated [mem 0x21effa000-0x21effdfff]
[ 0.005856] Zone ranges:
[ 0.005857] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.005858] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.005859] Normal [mem 0x0000000100000000-0x000000021effffff]
[ 0.005859] Device empty
[ 0.005860] Movable zone start for each node
[ 0.005861] Early memory node ranges
[ 0.005861] node 0: [mem 0x0000000000001000-0x000000000008ffff]
[ 0.005862] node 0: [mem 0x0000000000091000-0x000000000009ffff]
[ 0.005863] node 0: [mem 0x0000000000100000-0x00000000d37f2fff]
[ 0.005863] node 0: [mem 0x00000000d381d000-0x00000000da563fff]
[ 0.005864] node 0: [mem 0x00000000da6c8000-0x00000000daac0fff]
[ 0.005864] node 0: [mem 0x00000000db512000-0x00000000ddffffff]
[ 0.005865] node 0: [mem 0x0000000100000000-0x000000021effffff]
[ 0.005995] Zeroed struct page in unavailable ranges: 11329 pages
[ 0.005997] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[ 0.005998] On node 0 totalpages: 2081727
[ 0.005999] DMA zone: 64 pages used for memmap
[ 0.006000] DMA zone: 24 pages reserved
[ 0.006001] DMA zone: 3998 pages, LIFO batch:0
[ 0.006077] DMA32 zone: 14097 pages used for memmap
[ 0.006077] DMA32 zone: 902177 pages, LIFO batch:63
[ 0.023056] Normal zone: 18368 pages used for memmap
[ 0.023057] Normal zone: 1175552 pages, LIFO batch:63
[ 0.044480] ACPI: PM-Timer IO Port: 0x808
[ 0.044482] ACPI: Local APIC address 0xfee00000
[ 0.044489] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.044497] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.044500] IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
[ 0.044502] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.044503] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.044504] ACPI: IRQ0 used by override.
[ 0.044505] ACPI: IRQ9 used by override.
[ 0.044507] Using ACPI (MADT) for SMP configuration information
[ 0.044508] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.044519] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.044546] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.044547] PM: Registered nosave memory: [mem 0x00090000-0x00090fff]
[ 0.044549] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.044550] PM: Registered nosave memory: [mem 0xd37f3000-0xd381cfff]
[ 0.044552] PM: Registered nosave memory: [mem 0xda564000-0xda69ffff]
[ 0.044552] PM: Registered nosave memory: [mem 0xda6a0000-0xda6c7fff]
[ 0.044554] PM: Registered nosave memory: [mem 0xdaac1000-0xdab73fff]
[ 0.044554] PM: Registered nosave memory: [mem 0xdab74000-0xdb470fff]
[ 0.044555] PM: Registered nosave memory: [mem 0xdb471000-0xdb511fff]
[ 0.044556] PM: Registered nosave memory: [mem 0xde000000-0xdfffffff]
[ 0.044557] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.044557] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.044558] PM: Registered nosave memory: [mem 0xfc000000-0xfe3fffff]
[ 0.044558] PM: Registered nosave memory: [mem 0xfe400000-0xfe4fffff]
[ 0.044559] PM: Registered nosave memory: [mem 0xfe500000-0xfe9fffff]
[ 0.044559] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.044560] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[ 0.044560] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[ 0.044561] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.044561] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.044562] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[ 0.044562] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[ 0.044563] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[ 0.044563] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.044564] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.044564] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.044565] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.044565] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.044566] PM: Registered nosave memory: [mem 0xfed90000-0xfedbffff]
[ 0.044566] PM: Registered nosave memory: [mem 0xfedc0000-0xfedc0fff]
[ 0.044567] PM: Registered nosave memory: [mem 0xfedc1000-0xfedc1fff]
[ 0.044567] PM: Registered nosave memory: [mem 0xfedc2000-0xfedc8fff]
[ 0.044568] PM: Registered nosave memory: [mem 0xfedc9000-0xfedfffff]
[ 0.044568] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.044569] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[ 0.044569] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.044572] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.044573] Booting paravirtualized kernel on bare hardware
[ 0.044575] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.161013] random: get_random_bytes called from start_kernel+0x95/0x548 with crng_init=0
[ 0.161032] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:16 nr_node_ids:1
[ 0.162090] percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672 u262144
[ 0.162098] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[ 0.162099] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.162124] Built 1 zonelists, mobility grouping on. Total pages: 2049174
[ 0.162125] Policy zone: Normal
[ 0.162127] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=209c526b-ae10-4d79-ad91-a6b1a2856246 rw quiet amdgpu.dc=0 amdgpu.audio=0 amdgpu.dpm=0 amdgpu.aspm=0 amdgpu.runpm=0 amdgpu.bapm=0
[ 0.173460] Calgary: detecting Calgary via BIOS EBDA area
[ 0.173461] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.199812] Memory: 7960908K/8326908K available (12293K kernel code, 1268K rwdata, 3692K rodata, 1532K init, 3936K bss, 366000K reserved, 0K cma-reserved)
[ 0.200793] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.200811] ftrace: allocating 35812 entries in 140 pages
[ 0.217095] rcu: Preemptible hierarchical RCU implementation.
[ 0.217097] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.217098] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.217098] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
[ 0.217099] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.217100] Tasks RCU enabled.
[ 0.217101] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.217101] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.219007] NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16
[ 0.219171] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.219237] Console: colour dummy device 80x25
[ 0.219242] printk: console [tty0] enabled
[ 0.219285] ACPI: Core revision 20181003
[ 0.219615] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.219627] hpet clockevent registered
[ 0.219631] APIC: Switch to symmetric I/O mode setup
[ 0.219634] Switched APIC routing to physical flat.
[ 0.220016] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.236300] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x325c0f698eb, max_idle_ns: 440795215134 ns
[ 0.236313] Calibrating delay loop (skipped), value calculated using timer frequency.. 6990.53 BogoMIPS (lpj=11645660)
[ 0.236315] pid_max: default: 32768 minimum: 301
[ 0.236502] efi: memattr: Entry attributes invalid: RO and XP bits both cleared
[ 0.236506] efi: memattr: ! 0x000000090000-0x000000090fff [Runtime Code |RUN| | | | | | | | | | | ]
[ 0.237218] LSM: Security Framework initializing
[ 0.237220] Yama: becoming mindful.
[ 0.237226] AppArmor: AppArmor disabled by boot time parameter
[ 0.238758] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.239526] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.239610] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.239654] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.240175] mce: CPU supports 7 MCE banks
[ 0.240196] LVT offset 1 assigned for vector 0xf9
[ 0.240202] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.240202] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.240204] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.240205] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.240213] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.240214] Spectre V2 : User space: Vulnerable
[ 0.240215] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.240373] Freeing SMP alternatives memory: 28K
[ 0.246302] smpboot: CPU0: AMD Athlon(tm) X4 950 Quad Core Processor (family: 0x15, model: 0x65, stepping: 0x1)
[ 0.263012] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.263062] ... version: 0
[ 0.263062] ... bit width: 48
[ 0.263063] ... generic registers: 6
[ 0.263064] ... value mask: 0000ffffffffffff
[ 0.263064] ... max period: 00007fffffffffff
[ 0.263065] ... fixed-purpose events: 0
[ 0.263065] ... event mask: 000000000000003f
[ 0.269662] rcu: Hierarchical SRCU implementation.
[ 0.293068] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.299724] smp: Bringing up secondary CPUs ...
[ 0.339739] x86: Booting SMP configuration:
[ 0.339741] .... node #0, CPUs: #1 #2 #3
[ 0.422017] smp: Brought up 1 node, 4 CPUs
[ 0.422017] smpboot: Max logical packages: 4
[ 0.422017] smpboot: Total of 4 processors activated (27960.15 BogoMIPS)
[ 0.423838] devtmpfs: initialized
[ 0.423838] x86/mm: Memory block size: 128MB
[ 0.426360] PM: Registering ACPI NVS region [mem 0xdaac1000-0xdab73fff] (733184 bytes)
[ 0.426501] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.426501] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.426958] pinctrl core: initialized pinctrl subsystem
[ 0.427068] RTC time: 15:54:18, date: 02/26/19
[ 0.427658] NET: Registered protocol family 16
[ 0.427763] audit: initializing netlink subsys (disabled)
[ 0.427814] audit: type=2000 audit(1551196457.206:1): state=initialized audit_enabled=0 res=1
[ 0.429755] cpuidle: using governor ladder
[ 0.429757] cpuidle: using governor menu
[ 0.429799] ACPI: bus type PCI registered
[ 0.429801] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.430015] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.430018] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.430028] PCI: Using configuration type 1 for base access
[ 0.433101] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.433101] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.443381] ACPI: Added _OSI(Module Device)
[ 0.443382] ACPI: Added _OSI(Processor Device)
[ 0.443383] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.443384] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.443385] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.443386] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.458019] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.466108] ACPI: Interpreter enabled
[ 0.466130] ACPI: (supports S0 S3 S4 S5)
[ 0.466131] ACPI: Using IOAPIC for interrupt routing
[ 0.466353] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.466673] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 0.469972] ACPI: Power Resource [P0SD] (off)
[ 0.470006] ACPI: Power Resource [P3SD] (off)
[ 0.470110] ACPI: Power Resource [P0U2] (off)
[ 0.470144] ACPI: Power Resource [P3U2] (off)
[ 0.470314] ACPI: Power Resource [P0U3] (off)
[ 0.470348] ACPI: Power Resource [P3U3] (off)
[ 0.470871] ACPI: Power Resource [P0ST] (on)
[ 0.470907] ACPI: Power Resource [P3ST] (on)
[ 0.476098] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.476104] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.476342] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR]
[ 0.476556] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.476572] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.476962] PCI host bridge to bus 0000:00
[ 0.476965] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.476966] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.476967] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.476968] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.476969] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.476970] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.476971] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[ 0.476972] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[ 0.476974] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.476982] pci 0000:00:00.0: [1022:1576] type 00 class 0x060000
[ 0.477090] pci 0000:00:02.0: [1022:157b] type 00 class 0x060000
[ 0.477234] pci 0000:00:02.4: [1022:157c] type 01 class 0x060400
[ 0.477266] pci 0000:00:02.4: enabling Extended Tags
[ 0.477343] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.477432] pci 0000:00:03.0: [1022:157b] type 00 class 0x060000
[ 0.477517] pci 0000:00:03.1: [1022:157c] type 01 class 0x060400
[ 0.477548] pci 0000:00:03.1: enabling Extended Tags
[ 0.477581] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.477678] pci 0000:00:08.0: [1022:1578] type 00 class 0x108000
[ 0.477692] pci 0000:00:08.0: reg 0x10: [mem 0xf0000000-0xf001ffff 64bit pref]
[ 0.477696] pci 0000:00:08.0: reg 0x18: [mem 0xfe500000-0xfe5fffff]
[ 0.477701] pci 0000:00:08.0: reg 0x1c: [mem 0xfe90a000-0xfe90afff]
[ 0.477709] pci 0000:00:08.0: reg 0x24: [mem 0xfe906000-0xfe907fff]
[ 0.477803] pci 0000:00:09.0: [1022:157d] type 00 class 0x060000
[ 0.477890] pci 0000:00:09.2: [1022:157a] type 00 class 0x040300
[ 0.477899] pci 0000:00:09.2: reg 0x10: [mem 0xfe900000-0xfe903fff]
[ 0.477928] pci 0000:00:09.2: PME# supported from D0 D3hot D3cold
[ 0.478031] pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330
[ 0.478058] pci 0000:00:10.0: reg 0x10: [mem 0xfe904000-0xfe905fff 64bit]
[ 0.478157] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.478256] pci 0000:00:11.0: [1022:7901] type 00 class 0x010601
[ 0.478274] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
[ 0.478282] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
[ 0.478290] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
[ 0.478298] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
[ 0.478306] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
[ 0.478315] pci 0000:00:11.0: reg 0x24: [mem 0xfe908000-0xfe9083ff]
[ 0.478350] pci 0000:00:11.0: PME# supported from D3hot
[ 0.478426] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.478553] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.478689] pci 0000:00:18.0: [1022:1570] type 00 class 0x060000
[ 0.478761] pci 0000:00:18.1: [1022:1571] type 00 class 0x060000
[ 0.478829] pci 0000:00:18.2: [1022:1572] type 00 class 0x060000
[ 0.478908] pci 0000:00:18.3: [1022:1573] type 00 class 0x060000
[ 0.478990] pci 0000:00:18.4: [1022:1574] type 00 class 0x060000
[ 0.479058] pci 0000:00:18.5: [1022:1575] type 00 class 0x060000
[ 0.479204] pci 0000:01:00.0: [1022:43bc] type 00 class 0x0c0330
[ 0.479228] pci 0000:01:00.0: reg 0x10: [mem 0xfe7a0000-0xfe7a7fff 64bit]
[ 0.479269] pci 0000:01:00.0: enabling Extended Tags
[ 0.479320] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.479408] pci 0000:01:00.1: [1022:43b8] type 00 class 0x010601
[ 0.479459] pci 0000:01:00.1: reg 0x24: [mem 0xfe780000-0xfe79ffff]
[ 0.479467] pci 0000:01:00.1: reg 0x30: [mem 0xfe700000-0xfe77ffff pref]
[ 0.479473] pci 0000:01:00.1: enabling Extended Tags
[ 0.479513] pci 0000:01:00.1: PME# supported from D3hot D3cold
[ 0.479632] pci 0000:01:00.2: [1022:43b3] type 01 class 0x060400
[ 0.479678] pci 0000:01:00.2: enabling Extended Tags
[ 0.479721] pci 0000:01:00.2: PME# supported from D3hot D3cold
[ 0.479870] pci 0000:00:02.4: PCI bridge to [bus 01-06]
[ 0.479875] pci 0000:00:02.4: bridge window [io 0xe000-0xefff]
[ 0.479877] pci 0000:00:02.4: bridge window [mem 0xfe600000-0xfe7fffff]
[ 0.479993] pci 0000:02:04.0: [1022:43b4] type 01 class 0x060400
[ 0.480038] pci 0000:02:04.0: enabling Extended Tags
[ 0.480087] pci 0000:02:04.0: PME# supported from D3hot D3cold
[ 0.480176] pci 0000:02:05.0: [1022:43b4] type 01 class 0x060400
[ 0.480220] pci 0000:02:05.0: enabling Extended Tags
[ 0.480269] pci 0000:02:05.0: PME# supported from D3hot D3cold
[ 0.480370] pci 0000:02:06.0: [1022:43b4] type 01 class 0x060400
[ 0.480415] pci 0000:02:06.0: enabling Extended Tags
[ 0.480502] pci 0000:02:06.0: PME# supported from D3hot D3cold
[ 0.480614] pci 0000:02:07.0: [1022:43b4] type 01 class 0x060400
[ 0.480696] pci 0000:02:07.0: enabling Extended Tags
[ 0.480745] pci 0000:02:07.0: PME# supported from D3hot D3cold
[ 0.480847] pci 0000:01:00.2: PCI bridge to [bus 02-06]
[ 0.480852] pci 0000:01:00.2: bridge window [io 0xe000-0xefff]
[ 0.480855] pci 0000:01:00.2: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.480902] pci 0000:02:04.0: PCI bridge to [bus 03]
[ 0.480953] pci 0000:02:05.0: PCI bridge to [bus 04]
[ 0.481031] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.481072] pci 0000:05:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.481109] pci 0000:05:00.0: reg 0x18: [mem 0xfe604000-0xfe604fff 64bit]
[ 0.481131] pci 0000:05:00.0: reg 0x20: [mem 0xfe600000-0xfe603fff 64bit]
[ 0.481261] pci 0000:05:00.0: supports D1 D2
[ 0.481262] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.481446] pci 0000:02:06.0: PCI bridge to [bus 05]
[ 0.481451] pci 0000:02:06.0: bridge window [io 0xe000-0xefff]
[ 0.481454] pci 0000:02:06.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.481507] pci 0000:02:07.0: PCI bridge to [bus 06]
[ 0.481618] pci 0000:07:00.0: [1002:6811] type 00 class 0x030000
[ 0.481639] pci 0000:07:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.481647] pci 0000:07:00.0: reg 0x18: [mem 0xfe800000-0xfe83ffff 64bit]
[ 0.481653] pci 0000:07:00.0: reg 0x20: [io 0xd000-0xd0ff]
[ 0.481663] pci 0000:07:00.0: reg 0x30: [mem 0xfe840000-0xfe85ffff pref]
[ 0.481669] pci 0000:07:00.0: enabling Extended Tags
[ 0.481678] pci 0000:07:00.0: BAR 0: assigned to efifb
[ 0.481716] pci 0000:07:00.0: supports D1 D2
[ 0.481717] pci 0000:07:00.0: PME# supported from D1 D2 D3hot
[ 0.481743] pci 0000:07:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[ 0.481801] pci 0000:07:00.1: [1002:aab0] type 00 class 0x040300
[ 0.481818] pci 0000:07:00.1: reg 0x10: [mem 0xfe860000-0xfe863fff 64bit]
[ 0.481840] pci 0000:07:00.1: enabling Extended Tags
[ 0.481876] pci 0000:07:00.1: supports D1 D2
[ 0.481955] pci 0000:00:03.1: PCI bridge to [bus 07]
[ 0.481959] pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
[ 0.481961] pci 0000:00:03.1: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.481965] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.482673] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.482729] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.482780] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.482839] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.482932] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.483005] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.483052] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.483139] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.486394] pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.486397] pci 0000:07:00.0: vgaarb: bridge control possible
[ 0.486398] pci 0000:07:00.0: vgaarb: setting as boot device
[ 0.486399] vgaarb: loaded
[ 0.486606] ACPI: bus type USB registered
[ 0.486618] usbcore: registered new interface driver usbfs
[ 0.486623] usbcore: registered new interface driver hub
[ 0.486708] usbcore: registered new device driver usb
[ 0.486708] pps_core: LinuxPPS API ver. 1 registered
[ 0.486708] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.486708] PTP clock support registered
[ 0.486708] EDAC MC: Ver: 3.0.0
[ 0.486708] Registered efivars operations
[ 0.503161] PCI: Using ACPI for IRQ routing
[ 0.504863] PCI: pci_cache_line_size set to 64 bytes
[ 0.504918] e820: reserve RAM buffer [mem 0xd37f3000-0xd3ffffff]
[ 0.504920] e820: reserve RAM buffer [mem 0xda564000-0xdbffffff]
[ 0.504921] e820: reserve RAM buffer [mem 0xdaac1000-0xdbffffff]
[ 0.504921] e820: reserve RAM buffer [mem 0xde000000-0xdfffffff]
[ 0.504922] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.506310] NetLabel: Initializing
[ 0.506310] NetLabel: domain hash size = 128
[ 0.506310] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.506310] NetLabel: unlabeled traffic allowed by default
[ 0.506493] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.506497] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.509822] clocksource: Switched to clocksource tsc-early
[ 0.524060] VFS: Disk quotas dquot_6.6.0
[ 0.524118] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.524279] pnp: PnP ACPI init
[ 0.524465] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.524470] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.524510] system 00:01: [mem 0xfeb80000-0xfebfffff] has been reserved
[ 0.524513] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.524538] pnp 00:02: unknown resource type 13 in _CRS
[ 0.524539] pnp 00:02: can't evaluate _CRS: 1
[ 0.524571] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.524667] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.524831] system 00:04: [io 0x0300-0x030f] has been reserved
[ 0.524833] system 00:04: [io 0x0230-0x023f] has been reserved
[ 0.524834] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.524837] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.525113] pnp 00:05: [dma 0 disabled]
[ 0.525156] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.525381] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.525382] system 00:06: [io 0x040b] has been reserved
[ 0.525383] system 00:06: [io 0x04d6] has been reserved
[ 0.525385] system 00:06: [io 0x0c00-0x0c01] has been reserved
[ 0.525386] system 00:06: [io 0x0c14] has been reserved
[ 0.525387] system 00:06: [io 0x0c50-0x0c51] has been reserved
[ 0.525388] system 00:06: [io 0x0c52] has been reserved
[ 0.525389] system 00:06: [io 0x0c6c] has been reserved
[ 0.525390] system 00:06: [io 0x0c6f] has been reserved
[ 0.525391] system 00:06: [io 0x0cd0-0x0cd1] has been reserved
[ 0.525393] system 00:06: [io 0x0cd2-0x0cd3] has been reserved
[ 0.525394] system 00:06: [io 0x0cd4-0x0cd5] has been reserved
[ 0.525395] system 00:06: [io 0x0cd6-0x0cd7] has been reserved
[ 0.525396] system 00:06: [io 0x0cd8-0x0cdf] has been reserved
[ 0.525397] system 00:06: [io 0x0800-0x089f] has been reserved
[ 0.525398] system 00:06: [io 0x0b00-0x0b0f] has been reserved
[ 0.525399] system 00:06: [io 0x0b20-0x0b3f] has been reserved
[ 0.525400] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.525402] system 00:06: [io 0x0910-0x091f] has been reserved
[ 0.525403] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.525405] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.525406] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.525408] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.525409] system 00:06: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.525410] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.525411] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.525415] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.526072] pnp: PnP ACPI: found 7 devices
[ 0.532194] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.532252] pci 0000:02:04.0: PCI bridge to [bus 03]
[ 0.532264] pci 0000:02:05.0: PCI bridge to [bus 04]
[ 0.532274] pci 0000:02:06.0: PCI bridge to [bus 05]
[ 0.532277] pci 0000:02:06.0: bridge window [io 0xe000-0xefff]
[ 0.532281] pci 0000:02:06.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.532288] pci 0000:02:07.0: PCI bridge to [bus 06]
[ 0.532299] pci 0000:01:00.2: PCI bridge to [bus 02-06]
[ 0.532301] pci 0000:01:00.2: bridge window [io 0xe000-0xefff]
[ 0.532305] pci 0000:01:00.2: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.532311] pci 0000:00:02.4: PCI bridge to [bus 01-06]
[ 0.532313] pci 0000:00:02.4: bridge window [io 0xe000-0xefff]
[ 0.532316] pci 0000:00:02.4: bridge window [mem 0xfe600000-0xfe7fffff]
[ 0.532322] pci 0000:00:03.1: PCI bridge to [bus 07]
[ 0.532323] pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
[ 0.532326] pci 0000:00:03.1: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.532329] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.532335] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.532336] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.532338] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.532341] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.532343] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.532344] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.532345] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[ 0.532347] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[ 0.532348] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.532349] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe7fffff]
[ 0.532350] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.532351] pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 0.532353] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.532354] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 0.532355] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
[ 0.532356] pci_bus 0000:07: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.532358] pci_bus 0000:07: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.532612] NET: Registered protocol family 2
[ 0.533557] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.533582] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.533676] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.533844] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.533919] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.533949] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.534110] NET: Registered protocol family 1
[ 0.534116] NET: Registered protocol family 44
[ 0.534500] pci 0000:07:00.1: Linked as a consumer to 0000:07:00.0
[ 0.534547] PCI: CLS 64 bytes, default 64
[ 0.534589] Unpacking initramfs...
[ 0.651282] Freeing initrd memory: 9060K
[ 0.651293] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.651295] software IO TLB: mapped [mem 0xcf7f3000-0xd37f3000] (64MB)
[ 0.651343] amd_uncore: AMD NB counters detected
[ 0.651603] LVT offset 0 assigned for vector 0x400
[ 0.651647] perf: AMD IBS detected (0x000007ff)
[ 0.651718] check: Scanning for low memory corruption every 60 seconds
[ 0.652527] Initialise system trusted keyrings
[ 0.652620] Key type blacklist registered
[ 0.652720] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.654513] zbud: loaded
[ 0.713259] Key type asymmetric registered
[ 0.713262] Asymmetric key parser 'x509' registered
[ 0.713281] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.713360] io scheduler noop registered
[ 0.713361] io scheduler deadline registered
[ 0.713427] io scheduler cfq registered (default)
[ 0.713427] io scheduler mq-deadline registered
[ 0.713428] io scheduler kyber registered
[ 0.713518] io scheduler bfq registered
[ 0.714618] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.714692] efifb: probing for efifb
[ 0.714714] efifb: showing boot graphics
[ 0.715537] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[ 0.715538] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.715539] efifb: scrolling: redraw
[ 0.715540] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.715794] fbcon: Deferring console take-over
[ 0.715796] fb0: EFI VGA frame buffer device
[ 0.715876] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.715884] ACPI: Power Button [PWRB]
[ 0.715936] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.715961] ACPI: Power Button [PWRF]
[ 0.716116] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 0.716423] acpi device:0a: registered as cooling_device0
[ 0.716472] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input2
[ 0.717234] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.737915] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.739180] usbcore: registered new interface driver usbserial_generic
[ 0.739192] usbserial: USB Serial support registered for generic
[ 0.739215] rtc_cmos 00:03: RTC can wake from S4
[ 0.739350] rtc_cmos 00:03: registered as rtc0
[ 0.739363] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.739455] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.739857] NET: Registered protocol family 10
[ 0.748790] Segment Routing with IPv6
[ 0.748816] NET: Registered protocol family 17
[ 0.749245] RAS: Correctable Errors collector initialized.
[ 0.749292] microcode: CPU0: patch_level=0x0600611a
[ 0.749299] microcode: CPU1: patch_level=0x0600611a
[ 0.749307] microcode: CPU2: patch_level=0x0600611a
[ 0.749313] microcode: CPU3: patch_level=0x0600611a
[ 0.749366] microcode: Microcode Update Driver: v2.2.
[ 0.749385] sched_clock: Marking stable (748919759, 441771)->(859029872, -109668342)
[ 0.749595] registered taskstats version 1
[ 0.749603] Loading compiled-in X.509 certificates
[ 0.754627] Loaded X.509 cert 'Build time autogenerated kernel key: 776384fc5a2c2a60382626663793a2852880f743'
[ 0.754713] zswap: loaded using pool lzo/zbud
[ 0.763448] Key type big_key registered
[ 0.763983] Magic number: 7:411:943
[ 0.764011] tty tty0: hash matches
[ 0.764012] tty console: hash matches
[ 0.764087] rtc_cmos 00:03: setting system clock to 2019-02-26 15:54:18 UTC (1551196458)
[ 0.765728] Freeing unused decrypted memory: 2040K
[ 0.766148] Freeing unused kernel image memory: 1532K
[ 0.779279] Write protecting the kernel read-only data: 18432k
[ 0.779889] Freeing unused kernel image memory: 2016K
[ 0.780037] Freeing unused kernel image memory: 404K
[ 0.788742] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.788748] Run /init as init process
[ 0.829479] fbcon: Taking over console
[ 0.829557] Console: switching to colour frame buffer device 128x48
[ 0.900309] SCSI subsystem initialized
[ 0.900663] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.900676] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 0.900859] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
[ 0.901127] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
[ 0.901129] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.901130] usb usb1: Product: xHCI Host Controller
[ 0.901132] usb usb1: Manufacturer: Linux 4.20.12-arch1-1-ARCH xhci-hcd
[ 0.901133] usb usb1: SerialNumber: 0000:00:10.0
[ 0.901306] hub 1-0:1.0: USB hub found
[ 0.901320] hub 1-0:1.0: 4 ports detected
[ 0.901662] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.901666] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 0.901670] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[ 0.907808] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.907846] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20
[ 0.907848] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.907849] usb usb2: Product: xHCI Host Controller
[ 0.907851] usb usb2: Manufacturer: Linux 4.20.12-arch1-1-ARCH xhci-hcd
[ 0.907852] usb usb2: SerialNumber: 0000:00:10.0
[ 0.908038] hub 2-0:1.0: USB hub found
[ 0.908051] hub 2-0:1.0: 4 ports detected
[ 0.908512] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.908970] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3
[ 0.909256] libata version 3.00 loaded.
[ 0.912213] ahci 0000:00:11.0: version 3.0
[ 0.912424] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.912427] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
[ 0.912840] scsi host0: ahci
[ 0.913029] ata1: SATA max UDMA/133 abar m1024@0xfe908000 port 0xfe908100 irq 19
[ 0.914240] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
[ 0.914290] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[ 0.914293] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 0.916453] scsi host1: ahci
[ 0.918218] scsi host2: ahci
[ 0.923234] scsi host3: ahci
[ 0.929111] scsi host4: ahci
[ 0.935763] scsi host5: ahci
[ 0.939193] scsi host6: ahci
[ 0.942515] scsi host7: ahci
[ 0.942768] scsi host8: ahci
[ 0.942855] ata2: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780100 irq 40
[ 0.942857] ata3: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780180 irq 40
[ 0.942858] ata4: DUMMY
[ 0.942859] ata5: DUMMY
[ 0.942865] ata6: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780300 irq 40
[ 0.942871] ata7: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780380 irq 40
[ 0.942872] ata8: DUMMY
[ 0.942873] ata9: DUMMY
[ 0.964336] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000008000410
[ 0.964639] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
[ 0.964640] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.964642] usb usb3: Product: xHCI Host Controller
[ 0.964643] usb usb3: Manufacturer: Linux 4.20.12-arch1-1-ARCH xhci-hcd
[ 0.964644] usb usb3: SerialNumber: 0000:01:00.0
[ 0.964977] hub 3-0:1.0: USB hub found
[ 0.965003] hub 3-0:1.0: 9 ports detected
[ 0.971593] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.971597] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 4
[ 0.971601] xhci_hcd 0000:01:00.0: Host supports USB 3.10 Enhanced SuperSpeed
[ 0.971642] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.971668] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20
[ 0.971669] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.971671] usb usb4: Product: xHCI Host Controller
[ 0.971672] usb usb4: Manufacturer: Linux 4.20.12-arch1-1-ARCH xhci-hcd
[ 0.971673] usb usb4: SerialNumber: 0000:01:00.0
[ 0.971983] hub 4-0:1.0: USB hub found
[ 0.971992] hub 4-0:1.0: 3 ports detected
[ 1.229142] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.232602] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.371759] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
[ 1.371761] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.371762] usb 1-1: Product: USB 2.0 Hub [MTT]
[ 1.373409] hub 1-1:1.0: USB hub found
[ 1.373752] hub 1-1:1.0: 4 ports detected
[ 1.419862] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.420632] ata2.00: ATAPI: TSSTcorp CDDVDW TS-H653B, FS01, max UDMA/100
[ 1.421520] ata2.00: configured for UDMA/100
[ 1.422670] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H653B FS01 PQ: 0 ANSI: 5
[ 1.525615] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/32x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.525618] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.526133] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.656595] tsc: Refined TSC clocksource calibration: 3493.443 MHz
[ 1.656604] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x325b1f31d7d, max_idle_ns: 440795308042 ns
[ 1.656624] clocksource: Switched to clocksource tsc
[ 1.756534] usb 1-1.2: new full-speed USB device number 3 using xhci_hcd
[ 1.936537] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.943833] ata3.00: ATA-8: KINGSTON SV300S37A60G, 608ABBF0, max UDMA/133
[ 1.943836] ata3.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.950157] ata3.00: configured for UDMA/133
[ 1.950891] scsi 2:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[ 1.954453] sd 2:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.9 GiB)
[ 1.954466] sd 2:0:0:0: [sda] Write Protect is off
[ 1.954468] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.954483] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.959267] sda: sda1 sda2
[ 1.959764] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
[ 1.959766] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.959768] usb 1-1.2: Product: USB Receiver
[ 1.959769] usb 1-1.2: Manufacturer: Logitech
[ 1.960615] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.979943] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.993542] usbcore: registered new interface driver usbhid
[ 1.993543] usbhid: USB HID core driver
[ 1.996818] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C534.0001/input/input3
[ 2.053718] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:10.0-1.2/input0
[ 2.054035] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C534.0002/input/input4
[ 2.054078] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C534.0002/input/input5
[ 2.109979] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C534.0002/input/input6
[ 2.110115] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-1.2/input1
[ 2.149868] usb 1-1.4: new full-speed USB device number 4 using xhci_hcd
[ 2.353417] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.00
[ 2.353420] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.353421] usb 1-1.4: Product: USB Receiver
[ 2.353422] usb 1-1.4: Manufacturer: Logitech
[ 2.373167] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C534.0003/input/input9
[ 2.423211] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.424155] ata6.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133
[ 2.424158] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.425186] ata6.00: configured for UDMA/133
[ 2.426006] scsi 5:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5
[ 2.427110] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.427113] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[ 2.427157] sd 5:0:0:0: [sdb] Write Protect is off
[ 2.427160] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.427200] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.430439] hid-generic 0003:046D:C534.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:10.0-1.4/input0
[ 2.438548] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C534.0004/input/input10
[ 2.438600] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C534.0004/input/input11
[ 2.493264] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C534.0004/input/input12
[ 2.493551] hid-generic 0003:046D:C534.0004: input,hiddev1,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-1.4/input1
[ 2.509386] sdb: sdb1 sdb2 sdb3 sdb4
[ 2.511793] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 2.704794] random: fast init done
[ 3.063213] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.064186] ata7.00: ATA-9: WDC WD5000LPLX-21ZNTT0, 01.01A01, max UDMA/133
[ 3.064188] ata7.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 3.065220] ata7.00: configured for UDMA/133
[ 3.065881] scsi 6:0:0:0: Direct-Access ATA WDC WD5000LPLX-2 1A01 PQ: 0 ANSI: 5
[ 3.066980] sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 3.066983] sd 6:0:0:0: [sdc] 4096-byte physical blocks
[ 3.067007] sd 6:0:0:0: [sdc] Write Protect is off
[ 3.067009] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.067052] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.122073] sdc:
[ 3.122614] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 3.367243] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.537717] systemd[1]: systemd 241.7-2-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 3.553267] systemd[1]: Detected architecture x86-64.
[ 3.557321] systemd[1]: Set hostname to <Mys-CernaCita>.
[ 3.605185] systemd-fstab-generator[293]: Failed to create unit file /run/systemd/generator/-.mount, as it already exists. Duplicate entry in /etc/fstab?
[ 3.607093] systemd-fstab-generator[293]: Failed to create unit file /run/systemd/generator/dev-disk-by\x2duuid-74062756\x2da8b2\x2d45ad\x2d99b4\x2d2236702a4cbc.swap, as it already exists. Duplicate entry in /etc/fstab?
[ 3.624412] systemd[288]: /usr/lib/systemd/system-generators/systemd-fstab-generator failed with exit status 1.
[ 3.673386] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.673486] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.673622] systemd[1]: Listening on Journal Socket.
[ 3.673713] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.673821] systemd[1]: Listening on udev Kernel Socket.
[ 3.674813] systemd[1]: Mounting Huge Pages File System...
[ 3.701716] random: lvm: uninitialized urandom read (4 bytes read)
[ 3.702868] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 3.704312] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 3.710861] audit: type=1130 audit(1551196461.442:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.711597] audit: type=1130 audit(1551196461.442:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.712957] audit: type=1130 audit(1551196461.442:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.722518] random: systemd-random-: uninitialized urandom read (512 bytes read)
[ 3.724164] audit: type=1130 audit(1551196461.455:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.734698] audit: type=1130 audit(1551196461.465:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.749551] audit: type=1130 audit(1551196461.479:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.756518] audit: type=1130 audit(1551196461.489:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.768737] systemd-journald[304]: Received request to flush runtime journal from PID 1
[ 3.783052] audit: type=1130 audit(1551196461.515:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.818268] audit: type=1130 audit(1551196461.549:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.862415] acpi_cpufreq: overriding BIOS provided _PSD data
[ 3.994435] Linux agpgart interface v0.103
[ 3.995273] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 3.995277] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 4.000557] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 4.000667] mousedev: PS/2 mouse device common for all mice
[ 4.000688] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[ 4.000709] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[ 4.021858] libphy: r8169: probed
[ 4.022229] r8169 0000:05:00.0 eth0: RTL8168h/8111h, 2c:fd:a1:6e:cd:af, XID 54100800, IRQ 46
[ 4.022231] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 4.024522] input: PC Speaker as /devices/platform/pcspkr/input/input15
[ 4.039833] snd_hda_intel 0000:00:09.2: enabling device (0004 -> 0006)
[ 4.041715] cryptd: max_cpu_qlen set to 1000
[ 4.049398] snd_hda_intel 0000:07:00.1: enabling device (0000 -> 0002)
[ 4.049510] snd_hda_intel 0000:07:00.1: Handle vga_switcheroo audio client
[ 4.049512] snd_hda_intel 0000:07:00.1: Force to non-snoop mode
[ 4.073749] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 4.073752] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.073755] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 4.073757] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.073759] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
[ 4.073760] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.073762] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 4.073764] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 4.073765] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 4.092253] AVX2 version of gcm_enc/dec engaged.
[ 4.092256] AES CTR mode by8 optimization enabled
[ 4.095377] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card1/input16
[ 4.095449] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card1/input17
[ 4.095513] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card1/input18
[ 4.095566] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card1/input19
[ 4.095622] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card1/input20
[ 4.095693] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card1/input21
[ 4.101781] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:09.2/sound/card0/input22
[ 4.101971] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:09.2/sound/card0/input23
[ 4.102075] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:09.2/sound/card0/input24
[ 4.102178] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:09.2/sound/card0/input25
[ 4.102299] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:09.2/sound/card0/input26
[ 4.104194] Adding 32505852k swap on /dev/sdb4. Priority:-2 extents:1 across:32505852k FS
[ 4.145565] asus_wmi: ASUS WMI generic driver loaded
[ 4.147483] asus_wmi: Initialization: 0x0
[ 4.147524] asus_wmi: BIOS WMI version: 0.9
[ 4.147669] asus_wmi: SFUN value: 0x0
[ 4.148233] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input27
[ 4.148464] asus_wmi: Number of fans: 1
[ 4.165811] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 4.380546] [drm] radeon kernel modesetting enabled.
[ 4.380624] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 4.380625] fb0: switching to radeondrmfb from EFI VGA
[ 4.380658] Console: switching to colour dummy device 80x25
[ 4.381107] radeon 0000:07:00.0: enabling device (0006 -> 0007)
[ 4.381621] [drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6811 0x1043:0x2015 0x81).
[ 4.381683] ATOM BIOS: 6811HB.15.48.0.54.AS03
[ 4.381750] radeon 0000:07:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 4.381752] radeon 0000:07:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[ 4.381756] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 4.381757] [drm] RAM width 256bits DDR
[ 4.381840] [TTM] Zone kernel: Available graphics memory: 4051830 kiB
[ 4.381841] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 4.381842] [TTM] Initializing pool allocator
[ 4.381846] [TTM] Initializing DMA pool allocator
[ 4.381864] [drm] radeon: 2048M of VRAM memory ready
[ 4.381865] [drm] radeon: 2048M of GTT memory ready.
[ 4.381875] [drm] Loading pitcairn Microcode
[ 4.389709] [drm] Internal thermal controller with fan control
[ 4.395981] kvm: Nested Virtualization enabled
[ 4.395986] kvm: Nested Paging enabled
[ 4.395986] SVM: Virtual GIF supported
[ 4.399046] [drm] radeon: dpm initialized
[ 4.399119] MCE: In-kernel MCE decoding enabled.
[ 4.401227] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[ 4.401240] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 4.403114] EDAC amd64: Node 0: DRAM ECC disabled.
[ 4.403117] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 4.403462] random: crng init done
[ 4.404156] [drm] PCIE gen 3 link speeds already enabled
[ 4.424321] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.440252] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
[ 4.440399] radeon 0000:07:00.0: WB enabled
[ 4.440402] radeon 0000:07:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000e5cb59c8
[ 4.440403] radeon 0000:07:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x000000001d5d246e
[ 4.440405] radeon 0000:07:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x000000006390f7b2
[ 4.440406] radeon 0000:07:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x0000000090c846b7
[ 4.440407] radeon 0000:07:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000003e1652a7
[ 4.440721] radeon 0000:07:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0x0000000058f52f2a
[ 4.449449] EDAC amd64: Node 0: DRAM ECC disabled.
[ 4.449451] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 4.460901] radeon 0000:07:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0x0000000066e2b909
[ 4.460903] radeon 0000:07:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0x00000000a8645a92
[ 4.460906] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.460906] [drm] Driver supports precise vblank timestamp query.
[ 4.460908] radeon 0000:07:00.0: radeon: MSI limited to 32-bit
[ 4.460962] radeon 0000:07:00.0: radeon: using MSI.
[ 4.460993] [drm] radeon: irq initialized.
[ 4.606834] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.678541] [drm] ring test on 0 succeeded in 2 usecs
[ 4.678547] [drm] ring test on 1 succeeded in 1 usecs
[ 4.678552] [drm] ring test on 2 succeeded in 1 usecs
[ 4.678563] [drm] ring test on 3 succeeded in 5 usecs
[ 4.678573] [drm] ring test on 4 succeeded in 5 usecs
[ 4.723616] Generic PHY r8169-500:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-500:00, irq=IGNORE)
[ 4.825680] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 4.826113] r8169 0000:05:00.0 enp5s0: Link is Down
[ 4.855824] [drm] ring test on 5 succeeded in 2 usecs
[ 4.855830] [drm] UVD initialized successfully.
[ 4.966006] [drm] ring test on 6 succeeded in 23 usecs
[ 4.966019] [drm] ring test on 7 succeeded in 3 usecs
[ 4.966019] [drm] VCE initialized successfully.
[ 4.966209] [drm] ib test on ring 0 succeeded in 0 usecs
[ 4.966264] [drm] ib test on ring 1 succeeded in 0 usecs
[ 4.966330] [drm] ib test on ring 2 succeeded in 0 usecs
[ 4.966396] [drm] ib test on ring 3 succeeded in 0 usecs
[ 4.966466] [drm] ib test on ring 4 succeeded in 0 usecs
[ 5.530923] kauditd_printk_skb: 13 callbacks suppressed
[ 5.530927] audit: type=1130 audit(1551196463.262:24): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.629863] [drm] ib test on ring 5 succeeded
[ 6.136653] [drm] ib test on ring 6 succeeded
[ 6.643454] [drm] ib test on ring 7 succeeded
[ 6.644436] [drm] Radeon Display Connectors
[ 6.644438] [drm] Connector 0:
[ 6.644439] [drm] DP-1
[ 6.644439] [drm] HPD4
[ 6.644442] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 6.644442] [drm] Encoders:
[ 6.644443] [drm] DFP1: INTERNAL_UNIPHY2
[ 6.644444] [drm] Connector 1:
[ 6.644445] [drm] HDMI-A-1
[ 6.644446] [drm] HPD5
[ 6.644448] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 6.644449] [drm] Encoders:
[ 6.644450] [drm] DFP2: INTERNAL_UNIPHY2
[ 6.644451] [drm] Connector 2:
[ 6.644451] [drm] DVI-I-1
[ 6.644452] [drm] HPD6
[ 6.644454] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[ 6.644455] [drm] Encoders:
[ 6.644456] [drm] DFP3: INTERNAL_UNIPHY
[ 6.644457] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 6.644458] [drm] Connector 3:
[ 6.644458] [drm] DVI-D-1
[ 6.644459] [drm] HPD1
[ 6.644461] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[ 6.644462] [drm] Encoders:
[ 6.644463] [drm] DFP4: INTERNAL_UNIPHY1
[ 6.699424] [drm] fb mappable at 0xE05D8000
[ 6.699428] [drm] vram apper at 0xE0000000
[ 6.699429] [drm] size 5242880
[ 6.699431] [drm] fb depth is 24
[ 6.699432] [drm] pitch is 5120
[ 6.699589] fbcon: radeondrmfb (fb0) is primary device
[ 6.724390] Console: switching to colour frame buffer device 160x64
[ 6.729192] radeon 0000:07:00.0: fb0: radeondrmfb frame buffer device
[ 6.750368] [drm] Initialized radeon 2.50.0 20080528 for 0000:07:00.0 on minor 0
[ 6.763705] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 6.763707] AMD IOMMUv2 functionality not available on this system
[ 6.947709] [drm] amdgpu kernel modesetting enabled.
[ 6.947807] Parsing CRAT table with 0 nodes
[ 6.947816] Virtual CRAT table created for CPU
[ 6.947817] Parsing CRAT table with 1 nodes
[ 6.947819] Creating topology SYSFS entries
[ 6.947829] Topology: Add CPU node
[ 6.947830] Finished initializing topology
[ 6.971317] audit: type=1130 audit(1551196464.702:25): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:acpi_video0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 7.531926] r8169 0000:05:00.0 enp5s0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 7.531939] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[ 7.686494] audit: type=1130 audit(1551196465.419:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=netctl@ethernet\x2ddhcp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.702072] audit: type=1130 audit(1551196465.432:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.704129] audit: type=1130 audit(1551196465.435:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.724038] 8021q: 802.1Q VLAN Support v1.8
[ 7.764206] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.771689] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.771791] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 7.771793] cfg80211: failed to load regulatory.db
[ 27.149730] audit: type=1006 audit(1551196484.882:29): pid=532 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[ 27.192508] audit: type=1130 audit(1551196484.922:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 27.203712] audit: type=1006 audit(1551196484.935:31): pid=586 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 27.285403] audit: type=1130 audit(1551196485.015:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 30.871367] audit: type=1130 audit(1551196488.602:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 34.714816] audit: type=1131 audit(1551196492.445:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 34.738409] audit: type=1130 audit(1551196492.469:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=gdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 34.768127] audit: type=1130 audit(1551196492.499:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=accounts-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 34.855261] audit: type=1130 audit(1551196492.585:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@120 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 34.864111] audit: type=1006 audit(1551196492.595:38): pid=630 uid=0 old-auid=4294967295 auid=120 tty=(none) old-ses=4294967295 ses=3 res=1
[ 34.925017] audit: type=1130 audit(1551196492.655:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@120 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 36.197686] audit: type=1130 audit(1551196493.929:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 37.385786] audit: type=1130 audit(1551196495.115:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-localed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 37.681585] audit: type=1130 audit(1551196495.412:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=wpa_supplicant comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 37.690729] audit: type=1130 audit(1551196495.422:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=geoclue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 44.939963] kauditd_printk_skb: 3 callbacks suppressed
[ 44.939966] audit: type=1131 audit(1551196502.672:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 44.978708] audit: type=1131 audit(1551196502.709:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 46.494017] audit: type=1006 audit(1551196504.225:49): pid=870 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=4 res=1
[ 46.525082] audit: type=1130 audit(1551196504.255:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 46.536875] audit: type=1006 audit(1551196504.269:51): pid=875 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=5 res=1
[ 46.599140] audit: type=1130 audit(1551196504.329:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 46.618218] audit: type=1112 audit(1551196504.349:53): pid=870 uid=0 auid=1000 ses=4 msg='uid=1000 exe="/usr/lib/gdm-session-worker" hostname=? addr=? terminal=? res=success'
[ 48.105657] fuse init (API version 7.28)
[ 49.649277] audit: type=1130 audit(1551196507.379:54): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 49.895070] rfkill: input handler disabled
[ 67.204844] audit: type=1131 audit(1551196524.935:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@120 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 67.245386] audit: type=1131 audit(1551196524.975:56): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@120 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 80.191507] audit: type=1131 audit(1551196537.922:57): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-localed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 80.332008] audit: type=1131 audit(1551196538.065:58): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 98.040144] audit: type=1131 audit(1551196555.772:59): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=geoclue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'Offline
#9 2019-02-26 16:09:01
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,655
Re: [SOLVED]Monitor issues
You're using the radeon driver because this is a souther island GPU (I figured that using wikipedia, wtf. doess AMD make me do geography? I hate geography!)
https://wiki.archlinux.org/index.php/AM … parameters
Offline
#10 2019-02-26 16:11:08
- woof
- Member
- Registered: 2019-02-26
- Posts: 8
Re: [SOLVED]Monitor issues
ooooooooooooohhhhhh I did not realise that at all. Well, thank you very much for pointing that out to me. So I guess AMDGPU doesn't work on those GPUs, is that correct?
Offline
#11 2019-02-26 16:22:11
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,655
Re: [SOLVED]Monitor issues
It does "work", but not by default. See the link I posted and whether amdgpu does better.
For radeon, you can try
radeon.tv=1 radeon.audio=0 radeon.dpm=0 radeon.aspm=0 radeon.runpm=0 radeon.bapm=0Offline
#12 2019-02-26 16:49:14
- woof
- Member
- Registered: 2019-02-26
- Posts: 8
Re: [SOLVED]Monitor issues
omg i am such an idiot. After reconnecting the cable, I must have kicked it slightly or something and fell out again. I'm extremely sorry for taking your time, and thank you very much for your patience.
Last edited by woof (2019-02-26 17:20:19)
Offline
#13 2019-02-26 17:49:55
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 25,427
Re: [SOLVED]Monitor issues
Glad to hear, please mark as [SOLVED] by editing the title in your first post - https://wiki.archlinux.org/index.php/Co … ow_to_post
Last edited by V1del (2019-02-26 17:51:30)
Offline
#14 2019-02-26 19:52:41
- woof
- Member
- Registered: 2019-02-26
- Posts: 8
Re: [SOLVED]Monitor issues
V1del wrote:
Glad to hear, please mark as [SOLVED] by editing the title in your first post - https://wiki.archlinux.org/index.php/Co … ow_to_post
Sorry, forgot to that. Will do that right now.
Offline
Pages: 1