You are not logged in.

Pages: 1

#1 2019-03-23 05:45:48

taxborn
Member
From: Minnesota, USA
Registered: 2019-03-23
Posts: 3
Website

Audio only playing on HDMI monitor, no sound for headphones / built-in

First post!

Anyways, fresh install of Arch Linux, I'm trying to get PulseAudio to go through my laptops (Toshiba Satellite) built-in speakers and/or headphones. It works perfectly fine if in pavucontrol I set the playback to the HDMI monitors speaker, but no sound whatsoever when I set the playback to Built-in analog stereo. However, the bar that reacts to sound volume (not too sure what it's called, just changes when sound is playing). I am running i3-gaps, didn't have this problem in GNOME.

Any help is appreciated!

Offline

#2 2019-03-23 10:50:43

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,426

Re: Audio only playing on HDMI monitor, no sound for headphones / built-in

Post, within [ code ] tags and during active playback: 

sudo fuser -v /dev/snd/*
aplay -lL
pacmd list-cards
pacmd list-sinks
pacmd list-sink-inputs

Offline

#3 2019-03-23 15:55:52

taxborn
Member
From: Minnesota, USA
Registered: 2019-03-23
Posts: 3
Website

Re: Audio only playing on HDMI monitor, no sound for headphones / built-in

sudo fuser -v /dev/snd/*:

                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  taxborn    1286 F.... pulseaudio
/dev/snd/controlC1:  taxborn    1286 F.... pulseaudio
/dev/snd/pcmC0D3p:   taxborn    1286 F...m pulseaudio
/dev/snd/pcmC1D0c:   taxborn    1286 F...m pulseaudio
/dev/snd/pcmC1D0p:   taxborn    1286 F...m pulseaudio

aplay -lL: Actually didn't have this installed, just installed it.

null
    Discard all samples (playback) or generate zero samples (capture)
hdmi:CARD=HDMI,DEV=0
    HDA Intel HDMI, HDMI 0
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
    HDA Intel HDMI, HDMI 1
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
    HDA Intel HDMI, HDMI 2
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=3
    HDA Intel HDMI, HDMI 3
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=4
    HDA Intel HDMI, HDMI 4
    HDMI Audio Output
default:CARD=PCH
    HDA Intel PCH, CX20756 Analog
    Default Audio Device
sysdefault:CARD=PCH
    HDA Intel PCH, CX20756 Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, CX20756 Analog
    Front speakers
surround21:CARD=PCH,DEV=0
    HDA Intel PCH, CX20756 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
    HDA Intel PCH, CX20756 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
    HDA Intel PCH, CX20756 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
    HDA Intel PCH, CX20756 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
    HDA Intel PCH, CX20756 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
    HDA Intel PCH, CX20756 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 10: HDMI 4 [HDMI 4]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: CX20756 Analog [CX20756 Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0

pacmd list-cards

2 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_00_03.0>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel HDMI"
		alsa.long_card_name = "HDA Intel HDMI at 0xa2810000 irq 38"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:03.0"
		sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "0c0c"
		device.product.name = "Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: unknown)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no)
		output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5700, available: no)
		output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 600, available: no)
		output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 600, available: no)
		off: Off (priority 0, available: unknown)
	active profile: <output:hdmi-stereo>
	sinks:
		alsa_output.pci-0000_00_03.0.hdmi-stereo/#0: Built-in Audio Digital Stereo (HDMI)
	sources:
		alsa_output.pci-0000_00_03.0.hdmi-stereo.monitor/#0: Monitor of Built-in Audio Digital Stereo (HDMI)
	ports:
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "video-display"
				device.product.name = "H233H"
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
    index: 1
	name: <alsa_card.pci-0000_00_1b.0>
	driver: <module-alsa-card.c>
	owner module: 7
	properties:
		alsa.card = "1"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xa2814000 irq 34"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "8c20"
		device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "1"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analog Stereo Input (priority 65, available: unknown)
		output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: unknown)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.pci-0000_00_1b.0.analog-stereo/#2: Built-in Audio Analog Stereo
	sources:
		alsa_input.pci-0000_00_1b.0.analog-stereo/#3: Built-in Audio Analog Stereo
		alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#4: Monitor of Built-in Audio Analog Stereo
	ports:
		analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "audio-headphones"

pacmd list-sinks

2 sink(s) available.
    index: 0
	name: <alsa_output.pci-0000_00_03.0.hdmi-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: RUNNING
	suspend cause: (none)
	priority: 9030
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 22.96 ms
	max request: 4 KiB
	max rewind: 4 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 3
	configured latency: 25.00 ms; range is 0.50 .. 1999.82 ms
	card: 0 <alsa_card.pci-0000_00_03.0>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "HDMI 0"
		alsa.id = "HDMI 0"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "3"
		alsa.card = "0"
		alsa.card_name = "HDA Intel HDMI"
		alsa.long_card_name = "HDA Intel HDMI at 0xa2810000 irq 38"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:03.0"
		sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "0c0c"
		device.product.name = "Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller"
		device.form_factor = "internal"
		device.string = "hdmi:0"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "hdmi-stereo"
		device.profile.description = "Digital Stereo (HDMI)"
		device.description = "Built-in Audio Digital Stereo (HDMI)"
		alsa.mixer_name = "Intel Haswell HDMI"
		alsa.components = "HDA:80862807,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "video-display"
				device.product.name = "H233H"
	active port: <hdmi-output-0>
  * index: 2
	name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: (none)
	priority: 9039
	volume: front-left: 3830 /   6% / -74.00 dB,   front-right: 3830 /   6% / -74.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: yes
	current latency: 40.20 ms
	max request: 7 KiB
	max rewind: 7 KiB
	monitor source: 4
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 1
	configured latency: 40.00 ms; range is 0.50 .. 1837.50 ms
	card: 1 <alsa_card.pci-0000_00_1b.0>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "CX20756 Analog"
		alsa.id = "CX20756 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "1"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xa2814000 irq 34"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "8c20"
		device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "front:1"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Conexant CX20756"
		alsa.components = "HDA:14f15114,1179f845,00100100"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-headphones>

pacmd list-sink-inputs

1 sink input(s) available.
    index: 8
	driver: <protocol-native.c>
	flags: START_CORKED 
	state: RUNNING
	sink: 0 <alsa_output.pci-0000_00_03.0.hdmi-stereo>
	volume: front-left: 46536 /  71% / -8.92 dB,   front-right: 46536 /  71% / -8.92 dB
	        balance 0.00
	muted: no
	current latency: 55.06 ms
	requested latency: 25.00 ms
	sample spec: float32le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	resample method: speex-float-1
	module: 10
	client: 3 <AudioIPC Server>
	properties:
		media.name = "AudioStream"
		application.name = "AudioIPC Server"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "32"
		application.process.id = "1438"
		application.process.user = "taxborn"
		application.process.host = "dyst"
		application.process.binary = "firefox"
		application.language = "en_US.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "4b5b8b1c028149c4ae6984a39f68aaa9"
		application.process.session_id = "1"
		application.icon_name = "firefox"
		module-stream-restore.id = "sink-input-by-application-name:AudioIPC Server"

Offline

#4 2019-03-23 17:25:02

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,426

Re: Audio only playing on HDMI monitor, no sound for headphones / built-in

name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: (none)
	priority: 9039
	volume: front-left: 3830 /   6% / -74.00 dB,   front-right: 3830 /   6% / -74.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: yes

Your analog card is both muted and incredibly low volume, look at the devices tab in pavucontrol

Offline

Pages: 1

Board footer

Powered by FluxBB