You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2019-03-30 10:45:25
- anykk
- Member
- Registered: 2019-03-30
- Posts: 7
AMDGPU driver problem
Hi all! I'm newbie in linux and arch, so, I have some problems with video driver on my Dell Inspiron 5555 (A10-8700P and R5 M330):
[drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3.
journalctl -xb -p 3 output here
It seems that I solved it by
radeon.si_support=0 amdgpu.si_support=1 amdgpu.dc=0 in kernel parameters. Now I have a flickering black screen when booting for 2-3 seconds, but it works. I can boot and run startx.
lspci -k output:
...
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wani [Radeon R5/R6/R7 Graphics] (rev c5)
Subsystem: Dell Radeon R6 Graphics
Kernel driver in use: amdgpu
Kernel modules: amdgpu
...
03:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430 / R7 M520] (rev 81)
Subsystem: Dell Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430 / Radeon 520 Mobile]
Kernel driver in use: amdgpu
Kernel modules: radeon, amdgpuAm I using the right graphics drivers, and is it normal that I have a little flickering when booting? Also I have some visual artifacts in i3-gaps window manager, which is described here, but maybe it's not driver.
Last edited by anykk (2019-03-31 16:36:17)
Offline
#2 2019-03-31 13:57:03
- Lone_Wolf
- Administrator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 14,243
Re: AMDGPU driver problem
That card appears to be from GCN 1 generation and can use amdgpu or radeon kernel module .
Which one is better depends on what you want of it, please describe your usage.
Are you using early KMS ?
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
clean chroot building not flexible enough ?
Try clean chroot manager by graysky
Offline
#3 2019-03-31 14:13:15
- anykk
- Member
- Registered: 2019-03-30
- Posts: 7
Re: AMDGPU driver problem
I do not play games, just a browser (google chrome) and various IDEs. I tried to use it but with amdgpu there were a lot of different errors, I don't understand how to use radeon if for PCI:0:1:0 I haven't radeon in kernel modules.
Without any KMS settings and kernel paremeters in grub config I have
Providers: number : 1
Provider 0: id: 0x54 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 0 name:AMD Radeon R6 Graphics @ pci:0000:00:01.0in xrandr --listproviders. Does it mean that I'm using only R6 integrated graphics?
Now I'm using i3-gaps wihtout any additional KMS settings and kernel parameters and cause I didn't find which is right for me. i3wm for me have some problems which described here, I'm tried to use compton but it didn't help. journalctl -xb -p 3 gives me:
-- Logs begin at Thu 2019-03-28 14:56:36 +05, end at Sun 2019-03-31 19:15:17 +05. --
Mar 31 18:47:15 arch kernel: [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3
Mar 31 18:47:15 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 00000000bb3c1b35 (20181213/exresop-69)
Mar 31 18:47:15 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
Mar 31 18:47:15 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:47:15 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:47:15 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:47:15 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 000000005ff8077b (20181213/exresop-69)
Mar 31 18:47:15 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
Mar 31 18:47:15 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:47:15 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:47:15 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:47:15 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 00000000f315bb67 (20181213/exresop-69)
Mar 31 18:47:15 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
Mar 31 18:47:15 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:47:15 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:47:15 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:47:15 arch kernel: tpm_crb MSFT0101:00: can't request region for resource [mem 0xce026000-0xce026fff]
Mar 31 18:47:16 arch kernel: sp5100-tco sp5100-tco: Watchdog hardware is disabled
Mar 31 18:47:16 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 00000000ee3c094d (20181213/exresop-69)
Mar 31 18:47:16 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
Mar 31 18:47:16 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:47:16 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:47:16 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:48:08 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 00000000eca093a4 (20181213/exresop-69)
Mar 31 18:48:08 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
Mar 31 18:48:08 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:48:08 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:48:08 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:48:10 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 00000000b79f1dd3 (20181213/exresop-69)
Mar 31 18:48:10 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
Mar 31 18:48:10 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:48:10 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:48:10 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:49:04 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 000000000b6fadc7 (20181213/exresop-69)
Mar 31 18:49:04 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
Mar 31 18:49:04 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:49:04 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:49:04 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:49:05 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 0000000056a3e452 (20181213/exresop-69)
Mar 31 18:49:05 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
Mar 31 18:49:05 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:49:05 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:49:05 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:49:06 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 00000000eca093a4 (20181213/exresop-69)
Mar 31 18:49:06 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
Mar 31 18:49:06 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:49:06 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:49:06 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:49:08 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 00000000701f0d7f (20181213/exresop-69)
Mar 31 18:49:08 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
Mar 31 18:49:08 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:49:08 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:49:08 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:55:04 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 00000000be63f11f (20181213/exresop-69)
Mar 31 18:55:04 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
Mar 31 18:55:04 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:55:04 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:55:04 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:55:06 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 000000002eb97987 (20181213/exresop-69)
Mar 31 18:55:06 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
Mar 31 18:55:06 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:55:06 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
Mar 31 18:55:06 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)Sorry, I'm definitely noob in all this things 
Last edited by anykk (2019-03-31 14:21:23)
Offline
#4 2019-03-31 14:20:44
- loqs
- Member
- Registered: 2014-03-06
- Posts: 18,603
Re: AMDGPU driver problem
Please post the output of dmesg and the contents of Xorg.log. Please do not use -x when posting journalctl output.
Offline
#5 2019-03-31 14:25:51
- Lone_Wolf
- Administrator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 14,243
Re: AMDGPU driver problem
Whoops, I was looking at the 2nd entry , display controller.
post full lspci -k output please.
Also xorg log and glxinfo -B from booting without parameters/kms settings.
Those 3 outputs should have enough details to get a good idea of your system.
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
clean chroot building not flexible enough ?
Try clean chroot manager by graysky
Offline
#6 2019-03-31 14:26:58
- anykk
- Member
- Registered: 2019-03-30
- Posts: 7
Re: AMDGPU driver problem
xorg.log:
[ 26.534] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[ 26.535]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[ 26.535] Build Operating System: Linux Arch Linux
[ 26.535] Current Operating System: Linux arch 5.0.5-arch1-1-ARCH #1 SMP PREEMPT Wed Mar 27 17:53:10 UTC 2019 x86_64
[ 26.535] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e2fef576-dd34-4066-bb26-59b99e49d1d2 rw quiet
[ 26.535] Build Date: 27 February 2019 04:04:00PM
[ 26.535]
[ 26.535] Current version of pixman: 0.38.0
[ 26.535] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 26.535] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 26.536] (==) Log file: "/home/anykk/.local/share/xorg/Xorg.0.log", Time: Sun Mar 31 19:38:26 2019
[ 26.542] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 26.542] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 26.543] (==) No Layout section. Using the first Screen section.
[ 26.543] (==) No screen section available. Using defaults.
[ 26.543] (**) |-->Screen "Default Screen Section" (0)
[ 26.543] (**) | |-->Monitor "<default monitor>"
[ 26.544] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 26.544] (==) Automatically adding devices
[ 26.544] (==) Automatically enabling devices
[ 26.544] (==) Automatically adding GPU devices
[ 26.544] (==) Automatically binding GPU devices
[ 26.544] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 26.548] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 26.548] Entry deleted from font path.
[ 26.548] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 26.548] Entry deleted from font path.
[ 26.548] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 26.548] Entry deleted from font path.
[ 26.548] (==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF
[ 26.548] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 26.548] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 26.548] (II) Module ABI versions:
[ 26.548] X.Org ANSI C Emulation: 0.4
[ 26.548] X.Org Video Driver: 24.0
[ 26.548] X.Org XInput driver : 24.1
[ 26.548] X.Org Server Extension : 10.0
[ 26.549] (++) using VT number 1
[ 26.552] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 26.552] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 26.554] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[ 26.555] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 26.556] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 11 paused 0
[ 26.562] (--) PCI:*(0@0:1:0) 1002:9874:1028:06bd rev 197, Mem @ 0xd0000000/268435456, 0xf0000000/8388608, 0xff700000/262144, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072
[ 26.562] (--) PCI: (3@0:0:0) 1002:6660:1028:06bd rev 129, Mem @ 0xe0000000/268435456, 0xff400000/262144, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 26.562] (II) Open ACPI successful (/var/run/acpid.socket)
[ 26.562] (II) LoadModule: "glx"
[ 26.563] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 26.577] (II) Module glx: vendor="X.Org Foundation"
[ 26.577] compiled for 1.20.4, module version = 1.0.0
[ 26.578] ABI class: X.Org Server Extension, version 10.0
[ 26.578] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[ 26.578] loading driver: amdgpu
[ 26.578] (II) Applying OutputClass "Radeon" to /dev/dri/card1
[ 26.578] loading driver: radeon
[ 26.578] (==) Matched amdgpu as autoconfigured driver 0
[ 26.578] (==) Matched ati as autoconfigured driver 1
[ 26.578] (==) Matched radeon as autoconfigured driver 2
[ 26.578] (==) Matched modesetting as autoconfigured driver 3
[ 26.578] (==) Matched fbdev as autoconfigured driver 4
[ 26.578] (==) Matched vesa as autoconfigured driver 5
[ 26.578] (==) Assigned the driver to the xf86ConfigLayout
[ 26.578] (II) LoadModule: "amdgpu"
[ 26.580] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 26.586] (II) Module amdgpu: vendor="X.Org Foundation"
[ 26.586] compiled for 1.20.4, module version = 19.0.1
[ 26.586] Module class: X.Org Video Driver
[ 26.586] ABI class: X.Org Video Driver, version 24.0
[ 26.586] (II) LoadModule: "ati"
[ 26.586] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 26.587] (II) Module ati: vendor="X.Org Foundation"
[ 26.587] compiled for 1.20.4, module version = 19.0.1
[ 26.587] Module class: X.Org Video Driver
[ 26.587] ABI class: X.Org Video Driver, version 24.0
[ 26.587] (II) LoadModule: "radeon"
[ 26.587] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 26.592] (II) Module radeon: vendor="X.Org Foundation"
[ 26.592] compiled for 1.20.4, module version = 19.0.1
[ 26.592] Module class: X.Org Video Driver
[ 26.592] ABI class: X.Org Video Driver, version 24.0
[ 26.592] (II) LoadModule: "modesetting"
[ 26.592] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 26.594] (II) Module modesetting: vendor="X.Org Foundation"
[ 26.594] compiled for 1.20.4, module version = 1.20.4
[ 26.594] Module class: X.Org Video Driver
[ 26.594] ABI class: X.Org Video Driver, version 24.0
[ 26.594] (II) LoadModule: "fbdev"
[ 26.594] (WW) Warning, couldn't open module fbdev
[ 26.594] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 26.594] (II) LoadModule: "vesa"
[ 26.594] (WW) Warning, couldn't open module vesa
[ 26.594] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 26.594] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 26.594] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
ATI Radeon 9800PRO, ATI Radeon 9800XT,
ATI Radeon Mobility 9600/9700 (M10/M11),
ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
ATI FireGL V3350, ATI Mobility Radeon X1450,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
ATI FireGL V3400, ATI Mobility FireGL V5250,
ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
MULLINS, KAVERI, HAWAII
[ 26.596] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 26.597] (WW) Falling back to old probe method for modesetting
[ 26.597] (EE) AMDGPU(G0): amdgpu_device_initialize failed
[ 26.597] (II) [KMS] Kernel modesetting enabled.
[ 26.597] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 26.598] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 26.598] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 26.598] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 26.598] (==) AMDGPU(0): Default visual is TrueColor
[ 26.598] (==) AMDGPU(0): RGB weight 888
[ 26.598] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 26.598] (--) AMDGPU(0): Chipset: "AMD Radeon R6 Graphics" (ChipID = 0x9874)
[ 26.598] (II) Loading sub module "fb"
[ 26.598] (II) LoadModule: "fb"
[ 26.598] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 26.600] (II) Module fb: vendor="X.Org Foundation"
[ 26.600] compiled for 1.20.4, module version = 1.0.0
[ 26.600] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.600] (II) Loading sub module "dri2"
[ 26.600] (II) LoadModule: "dri2"
[ 26.600] (II) Module "dri2" already built-in
[ 27.027] (II) Loading sub module "glamoregl"
[ 27.027] (II) LoadModule: "glamoregl"
[ 27.027] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 27.041] (II) Module glamoregl: vendor="X.Org Foundation"
[ 27.041] compiled for 1.20.4, module version = 1.0.1
[ 27.041] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.082] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon R6 Graphics (CARRIZO, DRM 3.27.0, 5.0.5-arch1-1-ARCH, LLVM 7.0.1)
[ 27.082] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 27.082] (==) AMDGPU(0): TearFree property default: auto
[ 27.082] (==) AMDGPU(0): VariableRefresh: disabled
[ 27.082] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 27.083] (II) AMDGPU(0): Output eDP has no monitor section
[ 27.083] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[ 27.093] (II) AMDGPU(0): EDID for output eDP
[ 27.093] (II) AMDGPU(0): Manufacturer: CMN Model: 15ca Serial#: 0
[ 27.093] (II) AMDGPU(0): Year: 2014 Week: 32
[ 27.093] (II) AMDGPU(0): EDID Version: 1.4
[ 27.093] (II) AMDGPU(0): Digital Display Input
[ 27.093] (II) AMDGPU(0): 6 bits per channel
[ 27.093] (II) AMDGPU(0): Digital interface is DisplayPort
[ 27.093] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 27.093] (II) AMDGPU(0): Gamma: 2.20
[ 27.093] (II) AMDGPU(0): No DPMS capabilities specified
[ 27.093] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4
[ 27.093] (II) AMDGPU(0): First detailed timing is preferred mode
[ 27.093] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[ 27.093] (II) AMDGPU(0): redX: 0.569 redY: 0.332 greenX: 0.328 greenY: 0.581
[ 27.093] (II) AMDGPU(0): blueX: 0.159 blueY: 0.141 whiteX: 0.313 whiteY: 0.329
[ 27.093] (II) AMDGPU(0): Manufacturer's mask: 0
[ 27.093] (II) AMDGPU(0): Supported detailed timing:
[ 27.093] (II) AMDGPU(0): clock: 76.4 MHz Image Size: 344 x 193 mm
[ 27.093] (II) AMDGPU(0): h_active: 1366 h_sync: 1434 h_sync_end 1479 h_blank_end 1592 h_border: 0
[ 27.093] (II) AMDGPU(0): v_active: 768 v_sync: 772 v_sync_end 779 v_blanking: 800 v_border: 0
[ 27.093] (II) AMDGPU(0): Supported detailed timing:
[ 27.093] (II) AMDGPU(0): clock: 60.5 MHz Image Size: 344 x 193 mm
[ 27.093] (II) AMDGPU(0): h_active: 1366 h_sync: 1429 h_sync_end 1470 h_blank_end 1572 h_border: 0
[ 27.093] (II) AMDGPU(0): v_active: 768 v_sync: 772 v_sync_end 778 v_blanking: 801 v_border: 0
[ 27.093] (II) AMDGPU(0): 53MPX156BGE
[ 27.093] (II) AMDGPU(0): Unknown vendor-specific block 0
[ 27.093] (II) AMDGPU(0): EDID (in hex):
[ 27.093] (II) AMDGPU(0): 00ffffffffffff000daeca1500000000
[ 27.093] (II) AMDGPU(0): 201801049522137802c3c59155549428
[ 27.093] (II) AMDGPU(0): 24505400000001010101010101010101
[ 27.093] (II) AMDGPU(0): 010101010101da1d56e250002030442d
[ 27.093] (II) AMDGPU(0): 470058c11000001a9d1756ce50002130
[ 27.093] (II) AMDGPU(0): 3f29460058c11000001a000000fe0035
[ 27.093] (II) AMDGPU(0): 334d5058803135364247450a00000000
[ 27.093] (II) AMDGPU(0): 00004131960110000009010a202000a5
[ 27.093] (II) AMDGPU(0): Printing probed modes for output eDP
[ 27.093] (II) AMDGPU(0): Modeline "1366x768"x60.0 76.42 1366 1434 1479 1592 768 772 779 800 +hsync -vsync (48.0 kHz eP)
[ 27.093] (II) AMDGPU(0): Modeline "1366x768"x48.0 60.45 1366 1429 1470 1572 768 772 778 801 +hsync -vsync (38.5 kHz e)
[ 27.093] (II) AMDGPU(0): Modeline "1280x720"x60.0 76.42 1280 1434 1479 1592 720 772 779 800 +hsync -vsync (48.0 kHz e)
[ 27.093] (II) AMDGPU(0): Modeline "1024x768"x60.0 76.42 1024 1434 1479 1592 768 772 779 800 +hsync -vsync (48.0 kHz e)
[ 27.093] (II) AMDGPU(0): Modeline "800x600"x60.0 76.42 800 1434 1479 1592 600 772 779 800 +hsync -vsync (48.0 kHz e)
[ 27.093] (II) AMDGPU(0): Modeline "640x480"x60.0 76.42 640 1434 1479 1592 480 772 779 800 +hsync -vsync (48.0 kHz e)
[ 27.093] (II) AMDGPU(0): EDID for output HDMI-A-0
[ 27.093] (II) AMDGPU(0): Output eDP connected
[ 27.093] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[ 27.093] (II) AMDGPU(0): Using exact sizes for initial modes
[ 27.093] (II) AMDGPU(0): Output eDP using initial mode 1366x768 +0+0
[ 27.093] (II) AMDGPU(0): mem size init: gart size :bf96a000 vram size: s:1f5fd000 visible:1f5fd000
[ 27.093] (==) AMDGPU(0): DPI set to (96, 96)
[ 27.093] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 27.093] (II) Loading sub module "ramdac"
[ 27.093] (II) LoadModule: "ramdac"
[ 27.093] (II) Module "ramdac" already built-in
[ 27.094] (==) RADEON(G1): Depth 24, (--) framebuffer bpp 32
[ 27.094] (II) RADEON(G1): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 27.094] (==) RADEON(G1): Default visual is TrueColor
[ 27.094] (==) RADEON(G1): RGB weight 888
[ 27.094] (II) RADEON(G1): Using 8 bits per RGB (8 bit DAC)
[ 27.094] (--) RADEON(G1): Chipset: "HAINAN" (ChipID = 0x6660)
[ 27.094] (II) Loading sub module "fb"
[ 27.094] (II) LoadModule: "fb"
[ 27.094] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 27.094] (II) Module fb: vendor="X.Org Foundation"
[ 27.094] compiled for 1.20.4, module version = 1.0.0
[ 27.095] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.095] (II) Loading sub module "dri2"
[ 27.095] (II) LoadModule: "dri2"
[ 27.095] (II) Module "dri2" already built-in
[ 27.117] (II) Loading sub module "glamoregl"
[ 27.117] (II) LoadModule: "glamoregl"
[ 27.117] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 27.117] (II) Module glamoregl: vendor="X.Org Foundation"
[ 27.117] compiled for 1.20.4, module version = 1.0.1
[ 27.117] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.127] (II) RADEON(G1): glamor X acceleration enabled on AMD HAINAN (DRM 2.50.0, 5.0.5-arch1-1-ARCH, LLVM 7.0.1)
[ 27.127] (II) RADEON(G1): glamor detected, initialising EGL layer.
[ 27.127] (II) RADEON(G1): KMS Color Tiling: enabled
[ 27.127] (II) RADEON(G1): KMS Color Tiling 2D: enabled
[ 27.127] (==) RADEON(G1): TearFree property default: auto
[ 27.127] (II) RADEON(G1): mem size init: gart size :7fbcf000 vram size: s:80000000 visible:fbbe000
[ 27.127] (==) RADEON(G1): DPI set to (96, 96)
[ 27.127] (==) RADEON(G1): Using gamma correction (1.0, 1.0, 1.0)
[ 27.127] (II) Loading sub module "ramdac"
[ 27.127] (II) LoadModule: "ramdac"
[ 27.127] (II) Module "ramdac" already built-in
[ 27.127] (II) UnloadModule: "amdgpu"
[ 27.127] (II) UnloadModule: "modesetting"
[ 27.127] (II) Unloading modesetting
[ 27.127] (II) RADEON(G0): [DRI2] Setup complete
[ 27.127] (II) RADEON(G0): [DRI2] DRI driver: radeonsi
[ 27.127] (II) RADEON(G0): [DRI2] VDPAU driver: radeonsi
[ 27.128] (II) RADEON(G0): Front buffer size: 3072K
[ 27.128] (II) RADEON(G0): VRAM usage limit set to 229240K
[ 27.129] (==) RADEON(G0): Backing store enabled
[ 27.129] (II) RADEON(G0): Direct rendering enabled
[ 27.142] (II) RADEON(G0): Use GLAMOR acceleration.
[ 27.142] (II) RADEON(G0): Acceleration enabled
[ 27.142] (==) RADEON(G0): DPMS enabled
[ 27.142] (==) RADEON(G0): Silken mouse disabled
[ 27.143] (II) AMDGPU(0): [DRI2] Setup complete
[ 27.143] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi
[ 27.143] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi
[ 27.144] (II) AMDGPU(0): Front buffer pitch: 5504 bytes
[ 27.144] (II) AMDGPU(0): SYNC extension fences enabled
[ 27.144] (II) AMDGPU(0): Present extension enabled
[ 27.144] (==) AMDGPU(0): DRI3 enabled
[ 27.144] (==) AMDGPU(0): Backing store enabled
[ 27.144] (II) AMDGPU(0): Direct rendering enabled
[ 27.151] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 27.151] (II) AMDGPU(0): Acceleration enabled
[ 27.151] (==) AMDGPU(0): DPMS enabled
[ 27.151] (==) AMDGPU(0): Silken mouse disabled
[ 27.151] (II) AMDGPU(0): Set up textured video (glamor)
[ 27.160] (II) Initializing extension Generic Event Extension
[ 27.160] (II) Initializing extension SHAPE
[ 27.160] (II) Initializing extension MIT-SHM
[ 27.160] (II) Initializing extension XInputExtension
[ 27.160] (II) Initializing extension XTEST
[ 27.160] (II) Initializing extension BIG-REQUESTS
[ 27.160] (II) Initializing extension SYNC
[ 27.160] (II) Initializing extension XKEYBOARD
[ 27.160] (II) Initializing extension XC-MISC
[ 27.160] (II) Initializing extension SECURITY
[ 27.160] (II) Initializing extension XFIXES
[ 27.160] (II) Initializing extension RENDER
[ 27.160] (II) Initializing extension RANDR
[ 27.160] (II) Initializing extension COMPOSITE
[ 27.160] (II) Initializing extension DAMAGE
[ 27.160] (II) Initializing extension MIT-SCREEN-SAVER
[ 27.160] (II) Initializing extension DOUBLE-BUFFER
[ 27.160] (II) Initializing extension RECORD
[ 27.160] (II) Initializing extension DPMS
[ 27.160] (II) Initializing extension Present
[ 27.160] (II) Initializing extension DRI3
[ 27.160] (II) Initializing extension X-Resource
[ 27.160] (II) Initializing extension XVideo
[ 27.160] (II) Initializing extension XVideo-MotionCompensation
[ 27.160] (II) Initializing extension GLX
[ 27.166] (II) AIGLX: Loaded and initialized radeonsi
[ 27.166] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 27.167] (II) Initializing extension XFree86-VidModeExtension
[ 27.167] (II) Initializing extension XFree86-DGA
[ 27.167] (II) Initializing extension XFree86-DRI
[ 27.167] (II) Initializing extension DRI2
[ 27.174] (II) AMDGPU(0): Setting screen physical size to 361 x 203
[ 27.321] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 27.321] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 27.321] (**) Power Button: Applying InputClass "touchpad"
[ 27.321] (II) LoadModule: "libinput"
[ 27.321] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 27.329] (II) Module libinput: vendor="X.Org Foundation"
[ 27.329] compiled for 1.20.3, module version = 0.28.2
[ 27.329] Module class: X.Org XInput Driver
[ 27.329] ABI class: X.Org XInput driver, version 24.1
[ 27.329] (II) Using input driver 'libinput' for 'Power Button'
[ 27.331] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 25 paused 0
[ 27.331] (**) Power Button: always reports core events
[ 27.331] (**) Option "Device" "/dev/input/event2"
[ 27.331] (**) Option "_source" "server/udev"
[ 27.339] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 27.340] (II) event2 - Power Button: device is a keyboard
[ 27.340] (II) event2 - Power Button: device removed
[ 27.340] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 27.340] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 27.340] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 27.341] (II) event2 - Power Button: device is a keyboard
[ 27.341] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 27.341] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 27.341] (**) Video Bus: Applying InputClass "touchpad"
[ 27.341] (II) Using input driver 'libinput' for 'Video Bus'
[ 27.343] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 28 paused 0
[ 27.343] (**) Video Bus: always reports core events
[ 27.343] (**) Option "Device" "/dev/input/event3"
[ 27.343] (**) Option "_source" "server/udev"
[ 27.344] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 27.344] (II) event3 - Video Bus: device is a keyboard
[ 27.344] (II) event3 - Video Bus: device removed
[ 27.344] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[ 27.344] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 27.346] (II) event3 - Video Bus: is tagged by udev as: Keyboard
[ 27.346] (II) event3 - Video Bus: device is a keyboard
[ 27.347] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 27.347] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 27.347] (**) Video Bus: Applying InputClass "touchpad"
[ 27.347] (II) Using input driver 'libinput' for 'Video Bus'
[ 27.349] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 29 paused 0
[ 27.349] (**) Video Bus: always reports core events
[ 27.349] (**) Option "Device" "/dev/input/event4"
[ 27.349] (**) Option "_source" "server/udev"
[ 27.350] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 27.350] (II) event4 - Video Bus: device is a keyboard
[ 27.350] (II) event4 - Video Bus: device removed
[ 27.351] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input4/event4"
[ 27.351] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 27.352] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 27.352] (II) event4 - Video Bus: device is a keyboard
[ 27.353] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 27.353] (**) Lid Switch: Applying InputClass "touchpad"
[ 27.353] (II) Using input driver 'libinput' for 'Lid Switch'
[ 27.354] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 30 paused 0
[ 27.355] (**) Lid Switch: always reports core events
[ 27.355] (**) Option "Device" "/dev/input/event0"
[ 27.355] (**) Option "_source" "server/udev"
[ 27.356] (II) event0 - Lid Switch: is tagged by udev as: Switch
[ 27.356] (II) event0 - Lid Switch: device is a switch device
[ 27.356] (II) event0 - Lid Switch: device removed
[ 27.356] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0/event0"
[ 27.356] (II) XINPUT: Adding extended input device "Lid Switch" (type: KEYBOARD, id 9)
[ 27.357] (II) event0 - Lid Switch: is tagged by udev as: Switch
[ 27.357] (II) event0 - Lid Switch: device is a switch device
[ 27.357] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 27.357] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 27.357] (**) Sleep Button: Applying InputClass "touchpad"
[ 27.357] (II) Using input driver 'libinput' for 'Sleep Button'
[ 27.359] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 31 paused 0
[ 27.359] (**) Sleep Button: always reports core events
[ 27.359] (**) Option "Device" "/dev/input/event1"
[ 27.359] (**) Option "_source" "server/udev"
[ 27.361] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 27.361] (II) event1 - Sleep Button: device is a keyboard
[ 27.361] (II) event1 - Sleep Button: device removed
[ 27.361] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 27.361] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 27.362] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 27.362] (II) event1 - Sleep Button: device is a keyboard
[ 27.363] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event7)
[ 27.363] (**) HDA ATI HDMI HDMI/DP,pcm=3: Applying InputClass "touchpad"
[ 27.363] (II) Using input driver 'libinput' for 'HDA ATI HDMI HDMI/DP,pcm=3'
[ 27.365] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 32 paused 0
[ 27.365] (**) HDA ATI HDMI HDMI/DP,pcm=3: always reports core events
[ 27.365] (**) Option "Device" "/dev/input/event7"
[ 27.365] (**) Option "_source" "server/udev"
[ 27.367] (II) event7 - HDA ATI HDMI HDMI/DP,pcm=3: is tagged by udev as: Switch
[ 27.367] (II) event7 - HDA ATI HDMI HDMI/DP,pcm=3: device removed
[ 27.367] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.1/sound/card0/input9/event7"
[ 27.367] (II) XINPUT: Adding extended input device "HDA ATI HDMI HDMI/DP,pcm=3" (type: KEYBOARD, id 11)
[ 27.369] (II) event7 - HDA ATI HDMI HDMI/DP,pcm=3: is tagged by udev as: Switch
[ 27.371] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 27.371] (**) HDA Digital PCBeep: Applying InputClass "touchpad"
[ 27.371] (II) Using input driver 'libinput' for 'HDA Digital PCBeep'
[ 27.373] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 33 paused 0
[ 27.373] (**) HDA Digital PCBeep: always reports core events
[ 27.373] (**) Option "Device" "/dev/input/event8"
[ 27.373] (**) Option "_source" "server/udev"
[ 27.375] (II) event8 - HDA Digital PCBeep: not tagged as supported input device
[ 27.375] (II) event8 - not using input device '/dev/input/event8'.
[ 27.375] (EE) libinput: HDA Digital PCBeep: Failed to create a device for /dev/input/event8
[ 27.375] (EE) PreInit returned 2 for "HDA Digital PCBeep"
[ 27.375] (II) UnloadModule: "libinput"
[ 27.375] (II) systemd-logind: releasing fd for 13:72
[ 27.436] (II) config/udev: Adding input device HD-Audio Generic Headphone Mic (/dev/input/event9)
[ 27.436] (**) HD-Audio Generic Headphone Mic: Applying InputClass "touchpad"
[ 27.436] (II) Using input driver 'libinput' for 'HD-Audio Generic Headphone Mic'
[ 27.438] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 33 paused 0
[ 27.438] (**) HD-Audio Generic Headphone Mic: always reports core events
[ 27.438] (**) Option "Device" "/dev/input/event9"
[ 27.438] (**) Option "_source" "server/udev"
[ 27.440] (II) event9 - HD-Audio Generic Headphone Mic: is tagged by udev as: Switch
[ 27.440] (II) event9 - HD-Audio Generic Headphone Mic: device removed
[ 27.440] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:09.2/sound/card1/input11/event9"
[ 27.440] (II) XINPUT: Adding extended input device "HD-Audio Generic Headphone Mic" (type: KEYBOARD, id 12)
[ 27.441] (II) event9 - HD-Audio Generic Headphone Mic: is tagged by udev as: Switch
[ 27.442] (II) config/udev: Adding input device Integrated_Webcam_HD: Integrate (/dev/input/event11)
[ 27.442] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "libinput keyboard catchall"
[ 27.442] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "touchpad"
[ 27.442] (II) Using input driver 'libinput' for 'Integrated_Webcam_HD: Integrate'
[ 27.444] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 34 paused 0
[ 27.445] (**) Integrated_Webcam_HD: Integrate: always reports core events
[ 27.445] (**) Option "Device" "/dev/input/event11"
[ 27.445] (**) Option "_source" "server/udev"
[ 27.446] (II) event11 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[ 27.446] (II) event11 - Integrated_Webcam_HD: Integrate: device is a keyboard
[ 27.446] (II) event11 - Integrated_Webcam_HD: Integrate: device removed
[ 27.446] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-4/2-4:1.0/input/input19/event11"
[ 27.446] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD: Integrate" (type: KEYBOARD, id 13)
[ 27.448] (II) event11 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[ 27.448] (II) event11 - Integrated_Webcam_HD: Integrate: device is a keyboard
[ 27.449] (II) config/udev: Adding input device DLL07BD:00 06CB:75BF Touchpad (/dev/input/event10)
[ 27.449] (**) DLL07BD:00 06CB:75BF Touchpad: Applying InputClass "libinput touchpad catchall"
[ 27.449] (**) DLL07BD:00 06CB:75BF Touchpad: Applying InputClass "touchpad"
[ 27.449] (II) Using input driver 'libinput' for 'DLL07BD:00 06CB:75BF Touchpad'
[ 27.454] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 35 paused 0
[ 27.454] (**) DLL07BD:00 06CB:75BF Touchpad: always reports core events
[ 27.454] (**) Option "Device" "/dev/input/event10"
[ 27.454] (**) Option "_source" "server/udev"
[ 27.456] (II) event10 - DLL07BD:00 06CB:75BF Touchpad: is tagged by udev as: Touchpad
[ 27.457] (II) event10 - DLL07BD:00 06CB:75BF Touchpad: device is a touchpad
[ 27.457] (II) event10 - DLL07BD:00 06CB:75BF Touchpad: device removed
[ 27.457] (**) Option "Tapping" "on"
[ 27.457] (**) Option "NaturalScrolling" "true"
[ 27.457] (**) Option "ClickMethod" "clickfinger"
[ 27.457] (**) Option "config_info" "udev:/sys/devices/platform/AMD0010:00/i2c-0/i2c-DLL07BD:00/0018:06CB:75BF.0001/input/input17/event10"
[ 27.457] (II) XINPUT: Adding extended input device "DLL07BD:00 06CB:75BF Touchpad" (type: TOUCHPAD, id 14)
[ 27.458] (**) Option "AccelerationScheme" "none"
[ 27.458] (**) DLL07BD:00 06CB:75BF Touchpad: (accel) selected scheme none/0
[ 27.458] (**) DLL07BD:00 06CB:75BF Touchpad: (accel) acceleration factor: 2.000
[ 27.458] (**) DLL07BD:00 06CB:75BF Touchpad: (accel) acceleration threshold: 4
[ 27.459] (II) event10 - DLL07BD:00 06CB:75BF Touchpad: is tagged by udev as: Touchpad
[ 27.460] (II) event10 - DLL07BD:00 06CB:75BF Touchpad: device is a touchpad
[ 27.461] (II) config/udev: Adding input device DLL07BD:00 06CB:75BF Touchpad (/dev/input/mouse0)
[ 27.461] (**) DLL07BD:00 06CB:75BF Touchpad: Applying InputClass "touchpad"
[ 27.461] (II) Using input driver 'libinput' for 'DLL07BD:00 06CB:75BF Touchpad'
[ 27.461] (**) DLL07BD:00 06CB:75BF Touchpad: always reports core events
[ 27.461] (**) Option "Device" "/dev/input/mouse0"
[ 27.461] (**) Option "_source" "server/udev"
[ 27.461] (EE) xf86OpenSerial: Cannot open device /dev/input/mouse0
Permission denied.
[ 27.461] (II) mouse0: opening input device '/dev/input/mouse0' failed (Permission denied).
[ 27.461] (II) mouse0 - failed to create input device '/dev/input/mouse0'.
[ 27.462] (EE) libinput: DLL07BD:00 06CB:75BF Touchpad: Failed to create a device for /dev/input/mouse0
[ 27.462] (EE) PreInit returned 2 for "DLL07BD:00 06CB:75BF Touchpad"
[ 27.462] (II) UnloadModule: "libinput"
[ 27.462] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event12)
[ 27.462] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 27.462] (**) Dell WMI hotkeys: Applying InputClass "touchpad"
[ 27.462] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[ 27.465] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 36 paused 0
[ 27.465] (**) Dell WMI hotkeys: always reports core events
[ 27.465] (**) Option "Device" "/dev/input/event12"
[ 27.465] (**) Option "_source" "server/udev"
[ 27.468] (II) event12 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 27.468] (II) event12 - Dell WMI hotkeys: device is a keyboard
[ 27.468] (II) event12 - Dell WMI hotkeys: device removed
[ 27.468] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input15/event12"
[ 27.468] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 15)
[ 27.470] (II) event12 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 27.470] (II) event12 - Dell WMI hotkeys: device is a keyboard
[ 27.471] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[ 27.471] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 27.471] (**) AT Translated Set 2 keyboard: Applying InputClass "touchpad"
[ 27.471] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 27.473] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 37 paused 0
[ 27.474] (**) AT Translated Set 2 keyboard: always reports core events
[ 27.474] (**) Option "Device" "/dev/input/event5"
[ 27.474] (**) Option "_source" "server/udev"
[ 27.476] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 27.476] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 27.478] (II) event5 - AT Translated Set 2 keyboard: device removed
[ 27.478] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[ 27.478] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[ 27.480] (II) event5 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 27.480] (II) event5 - AT Translated Set 2 keyboard: device is a keyboard
[ 27.481] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 27.481] (**) PC Speaker: Applying InputClass "touchpad"
[ 27.481] (II) Using input driver 'libinput' for 'PC Speaker'
[ 27.484] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 38 paused 0
[ 27.484] (**) PC Speaker: always reports core events
[ 27.484] (**) Option "Device" "/dev/input/event6"
[ 27.484] (**) Option "_source" "server/udev"
[ 27.486] (II) event6 - PC Speaker: not tagged as supported input device
[ 27.486] (II) event6 - not using input device '/dev/input/event6'.
[ 27.486] (EE) libinput: PC Speaker: Failed to create a device for /dev/input/event6
[ 27.486] (EE) PreInit returned 2 for "PC Speaker"
[ 27.486] (II) UnloadModule: "libinput"
[ 27.486] (II) systemd-logind: releasing fd for 13:70
[ 27.897] (II) AMDGPU(0): EDID vendor "CMN", prod id 5578
[ 27.897] (II) AMDGPU(0): Printing DDC gathered Modelines:
[ 27.897] (II) AMDGPU(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 +hsync -vsync (48.0 kHz eP)
[ 27.897] (II) AMDGPU(0): Modeline "1366x768"x0.0 60.45 1366 1429 1470 1572 768 772 778 801 +hsync -vsync (38.5 kHz e)dmesg output:
[ 0.000000] Linux version 5.0.5-arch1-1-ARCH (builduser@heftig-17705) (gcc version 8.2.1 20181127 (GCC)) #1 SMP PREEMPT Wed Mar 27 17:53:10 UTC 2019
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e2fef576-dd34-4066-bb26-59b99e49d1d2 rw quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cd04ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cd050000-0x00000000cdb4efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cdb4f000-0x00000000cdb80fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cdb81000-0x00000000ce02cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ce02d000-0x00000000ce35dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ce35e000-0x00000000ce3aefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000ce3af000-0x00000000ce535fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ce536000-0x00000000ceb5efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ceb5f000-0x00000000cf203fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf204000-0x00000000cf7f9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf7fa000-0x00000000cf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc0000-0x00000000fedc0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedc8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000020effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ESRT=0xce35a518 ACPI=0xcdb59000 ACPI 2.0=0xcdb59000 SMBIOS=0xce35a218
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Dell Inc. Inspiron 5555/0CX84K, BIOS A12 08/30/2016
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1796.542 MHz processor
[ 0.000273] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000277] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000296] last_pfn = 0x20f000 max_arch_pfn = 0x400000000
[ 0.000307] MTRR default type: uncachable
[ 0.000308] MTRR fixed ranges enabled:
[ 0.000312] 00000-9FFFF write-back
[ 0.000314] A0000-BFFFF write-through
[ 0.000316] C0000-EFFFF uncachable
[ 0.000318] F0000-FFFFF write-protect
[ 0.000320] MTRR variable ranges enabled:
[ 0.000323] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000327] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000330] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000332] 3 base 0000CF800000 mask FFFFFF800000 uncachable
[ 0.000334] 4 disabled
[ 0.000335] 5 disabled
[ 0.000336] 6 disabled
[ 0.000338] 7 disabled
[ 0.000340] TOM2: 000000022f000000 aka 8944M
[ 0.000683] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000875] total RAM covered: 3320M
[ 0.002235] Found optimal setting for mtrr clean up
[ 0.002238] gran_size: 64K chunk_size: 16M num_reg: 4 lose cover RAM: 0G
[ 0.002406] e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
[ 0.002417] last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[ 0.014272] esrt: Reserving ESRT space from 0x00000000ce35a518 to 0x00000000ce35a550.
[ 0.014291] check: Scanning 1 areas for low memory corruption
[ 0.014297] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[ 0.014303] Using GB pages for direct mapping
[ 0.014307] BRK [0x12e601000, 0x12e601fff] PGTABLE
[ 0.014312] BRK [0x12e602000, 0x12e602fff] PGTABLE
[ 0.014314] BRK [0x12e603000, 0x12e603fff] PGTABLE
[ 0.014473] BRK [0x12e604000, 0x12e604fff] PGTABLE
[ 0.014478] BRK [0x12e605000, 0x12e605fff] PGTABLE
[ 0.015525] BRK [0x12e606000, 0x12e606fff] PGTABLE
[ 0.015777] BRK [0x12e607000, 0x12e607fff] PGTABLE
[ 0.016135] BRK [0x12e608000, 0x12e608fff] PGTABLE
[ 0.016139] BRK [0x12e609000, 0x12e609fff] PGTABLE
[ 0.016439] BRK [0x12e60a000, 0x12e60afff] PGTABLE
[ 0.016917] BRK [0x12e60b000, 0x12e60bfff] PGTABLE
[ 0.017292] BRK [0x12e60c000, 0x12e60cfff] PGTABLE
[ 0.017669] Secure boot could not be determined
[ 0.017671] RAMDISK: [mem 0x351d9000-0x368e3fff]
[ 0.017682] ACPI: Early table checksum verification disabled
[ 0.017688] ACPI: RSDP 0x00000000CDB59000 000024 (v02 DELL )
[ 0.017695] ACPI: XSDT 0x00000000CDB590A8 0000CC (v01 DELL CL09 01072009 AMI 00010013)
[ 0.017707] ACPI: FACP 0x00000000CDB63678 00010C (v05 DELL CL09 01072009 AMI 00010013)
[ 0.017717] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20181213/tbfadt-624)
[ 0.017725] ACPI: DSDT 0x00000000CDB59200 00A475 (v02 DELL CL09 01072009 INTL 20120913)
[ 0.017733] ACPI: FACS 0x00000000CE02BC80 000040
[ 0.017738] ACPI: APIC 0x00000000CDB63788 00007E (v03 DELL CL09 01072009 AMI 00010013)
[ 0.017745] ACPI: FPDT 0x00000000CDB63808 000044 (v01 DELL CL09 01072009 AMI 00010013)
[ 0.017751] ACPI: FIDT 0x00000000CDB63850 00009C (v01 DELL CL09 01072009 AMI 00010013)
[ 0.017758] ACPI: MCFG 0x00000000CDB638F0 00003C (v01 DELL CL09 01072009 MSFT 00010013)
[ 0.017764] ACPI: SLIC 0x00000000CDB63930 000176 (v01 DELL CL09 01072009 AMI 00010013)
[ 0.017770] ACPI: BOOT 0x00000000CDB63AA8 000028 (v01 DELL CL09 01072009 AMI 00010013)
[ 0.017776] ACPI: HPET 0x00000000CDB63AD0 000038 (v01 DELL CL09 01072009 AMI 00000005)
[ 0.017782] ACPI: UEFI 0x00000000CDB63B08 000042 (v01 00000000 00000000)
[ 0.017789] ACPI: MSDM 0x00000000CDB63B50 000055 (v03 DELL CL09 01072009 AMI 00010013)
[ 0.017795] ACPI: IVRS 0x00000000CDB63BA8 0000D0 (v02 AMD AGESA 00000001 AMD 00000000)
[ 0.017801] ACPI: VFCT 0x00000000CDB63C78 00FC84 (v01 DELL CL09 00000001 AMD 31504F47)
[ 0.017807] ACPI: BGRT 0x00000000CDB73900 000038 (v01 DELL CL09 01072009 AMI 00010013)
[ 0.017813] ACPI: TPM2 0x00000000CDB73938 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
[ 0.017819] ACPI: SSDT 0x00000000CDB73970 000854 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.017825] ACPI: SSDT 0x00000000CDB741C8 00873A (v02 AMD AGESA 00000002 MSFT 04000000)
[ 0.017831] ACPI: CRAT 0x00000000CDB7C908 000550 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.017837] ACPI: SSDT 0x00000000CDB7CE58 00147F (v01 AMD CPMDFIGP 00000001 INTL 20120913)
[ 0.017843] ACPI: SSDT 0x00000000CDB7E2D8 000A7F (v01 AMD CPMDFDGP 00000001 INTL 20120913)
[ 0.017849] ACPI: SSDT 0x00000000CDB7ED58 000692 (v01 AMD CPMADPS4 00000001 INTL 20120913)
[ 0.017855] ACPI: SSDT 0x00000000CDB7F3F0 0015F0 (v01 AMD CPMCMN 00000001 INTL 20120913)
[ 0.017876] ACPI: Local APIC address 0xfee00000
[ 0.018071] No NUMA configuration found
[ 0.018073] Faking a node at [mem 0x0000000000000000-0x000000020effffff]
[ 0.018080] NODE_DATA(0) allocated [mem 0x20effc000-0x20effffff]
[ 0.018130] Zone ranges:
[ 0.018132] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.018135] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.018137] Normal [mem 0x0000000100000000-0x000000020effffff]
[ 0.018140] Device empty
[ 0.018141] Movable zone start for each node
[ 0.018143] Early memory node ranges
[ 0.018145] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.018147] node 0: [mem 0x0000000000100000-0x00000000cd04ffff]
[ 0.018148] node 0: [mem 0x00000000ce3af000-0x00000000ce535fff]
[ 0.018150] node 0: [mem 0x00000000ceb5f000-0x00000000cf203fff]
[ 0.018152] node 0: [mem 0x00000000cf7fa000-0x00000000cf7fffff]
[ 0.018153] node 0: [mem 0x0000000100000000-0x000000020effffff]
[ 0.018474] Zeroed struct page in unavailable ranges: 10207 pages
[ 0.018478] Initmem setup node 0 [mem 0x0000000000001000-0x000000020effffff]
[ 0.018481] On node 0 totalpages: 1951777
[ 0.018484] DMA zone: 64 pages used for memmap
[ 0.018485] DMA zone: 23 pages reserved
[ 0.018488] DMA zone: 3999 pages, LIFO batch:0
[ 0.018704] DMA32 zone: 13091 pages used for memmap
[ 0.018706] DMA32 zone: 837762 pages, LIFO batch:63
[ 0.064173] Normal zone: 17344 pages used for memmap
[ 0.064175] Normal zone: 1110016 pages, LIFO batch:63
[ 0.121798] ACPI: PM-Timer IO Port: 0x808
[ 0.121801] ACPI: Local APIC address 0xfee00000
[ 0.121813] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.121824] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.121829] IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
[ 0.121833] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.121836] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.121839] ACPI: IRQ0 used by override.
[ 0.121841] ACPI: IRQ9 used by override.
[ 0.121845] Using ACPI (MADT) for SMP configuration information
[ 0.121848] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.121867] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.121914] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.121918] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.121922] PM: Registered nosave memory: [mem 0xcd050000-0xcdb4efff]
[ 0.121923] PM: Registered nosave memory: [mem 0xcdb4f000-0xcdb80fff]
[ 0.121925] PM: Registered nosave memory: [mem 0xcdb81000-0xce02cfff]
[ 0.121926] PM: Registered nosave memory: [mem 0xce02d000-0xce35dfff]
[ 0.121928] PM: Registered nosave memory: [mem 0xce35e000-0xce3aefff]
[ 0.121931] PM: Registered nosave memory: [mem 0xce536000-0xceb5efff]
[ 0.121935] PM: Registered nosave memory: [mem 0xcf204000-0xcf7f9fff]
[ 0.121938] PM: Registered nosave memory: [mem 0xcf800000-0xf7ffffff]
[ 0.121939] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.121941] PM: Registered nosave memory: [mem 0xfc000000-0xfeb7ffff]
[ 0.121942] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[ 0.121944] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.121945] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.121947] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.121948] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.121949] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.121951] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.121952] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.121953] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.121955] PM: Registered nosave memory: [mem 0xfed90000-0xfedbffff]
[ 0.121956] PM: Registered nosave memory: [mem 0xfedc0000-0xfedc0fff]
[ 0.121957] PM: Registered nosave memory: [mem 0xfedc1000-0xfedc1fff]
[ 0.121959] PM: Registered nosave memory: [mem 0xfedc2000-0xfedc8fff]
[ 0.121960] PM: Registered nosave memory: [mem 0xfedc9000-0xff7fffff]
[ 0.121962] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.121966] [mem 0xcf800000-0xf7ffffff] available for PCI devices
[ 0.121968] Booting paravirtualized kernel on bare hardware
[ 0.121973] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.442621] random: get_random_bytes called from start_kernel+0x95/0x538 with crng_init=0
[ 0.442637] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[ 0.443281] percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672 u524288
[ 0.443295] pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152
[ 0.443298] pcpu-alloc: [0] 0 1 2 3
[ 0.443339] Built 1 zonelists, mobility grouping on. Total pages: 1921255
[ 0.443341] Policy zone: Normal
[ 0.443344] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e2fef576-dd34-4066-bb26-59b99e49d1d2 rw quiet
[ 0.459637] Calgary: detecting Calgary via BIOS EBDA area
[ 0.459640] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.501733] Memory: 7513672K/7807108K available (12291K kernel code, 1286K rwdata, 3720K rodata, 1536K init, 3900K bss, 293436K reserved, 0K cma-reserved)
[ 0.502174] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.502188] ftrace: allocating 35894 entries in 141 pages
[ 0.544232] rcu: Preemptible hierarchical RCU implementation.
[ 0.544235] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.544236] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.544238] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[ 0.544240] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.544241] Tasks RCU enabled.
[ 0.544243] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.544245] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.548197] NR_IRQS: 20736, nr_irqs: 1000, preallocated irqs: 16
[ 0.548388] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.548466] Console: colour dummy device 80x25
[ 0.548475] printk: console [tty0] enabled
[ 0.548520] ACPI: Core revision 20181213
[ 0.549169] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.549183] hpet clockevent registered
[ 0.549190] APIC: Switch to symmetric I/O mode setup
[ 0.597317] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.612529] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19e56701b31, max_idle_ns: 440795274751 ns
[ 0.612555] Calibrating delay loop (skipped), value calculated using timer frequency.. 3594.79 BogoMIPS (lpj=5988473)
[ 0.612561] pid_max: default: 32768 minimum: 301
[ 0.618236] LSM: Security Framework initializing
[ 0.618240] Yama: becoming mindful.
[ 0.618251] AppArmor: AppArmor disabled by boot time parameter
[ 0.620831] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.622114] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.622189] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.622231] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.622741] mce: CPU supports 7 MCE banks
[ 0.622762] LVT offset 1 assigned for vector 0xf9
[ 0.622775] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.622777] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.622781] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.622782] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.622785] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.623157] Freeing SMP alternatives memory: 32K
[ 0.629199] smpboot: CPU0: AMD A10-8700P Radeon R6, 10 Compute Cores 4C+6G (family: 0x15, model: 0x60, stepping: 0x1)
[ 0.645935] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.645943] ... version: 0
[ 0.645944] ... bit width: 48
[ 0.645944] ... generic registers: 6
[ 0.645945] ... value mask: 0000ffffffffffff
[ 0.645946] ... max period: 00007fffffffffff
[ 0.645946] ... fixed-purpose events: 0
[ 0.645947] ... event mask: 000000000000003f
[ 0.652592] rcu: Hierarchical SRCU implementation.
[ 0.675956] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.682607] smp: Bringing up secondary CPUs ...
[ 0.722615] x86: Booting SMP configuration:
[ 0.722617] .... node #0, CPUs: #1 #2 #3
[ 0.804792] smp: Brought up 1 node, 4 CPUs
[ 0.804792] smpboot: Max logical packages: 1
[ 0.804792] smpboot: Total of 4 processors activated (14378.18 BogoMIPS)
[ 0.806007] devtmpfs: initialized
[ 0.806007] x86/mm: Memory block size: 128MB
[ 0.806733] PM: Registering ACPI NVS region [mem 0xcdb81000-0xce02cfff] (4898816 bytes)
[ 0.806733] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.806733] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.806733] pinctrl core: initialized pinctrl subsystem
[ 0.806733] RTC time: 13:47:10, date: 2019-03-31
[ 0.806733] NET: Registered protocol family 16
[ 0.806733] audit: initializing netlink subsys (disabled)
[ 0.806733] audit: type=2000 audit(1554040029.213:1): state=initialized audit_enabled=0 res=1
[ 0.806733] cpuidle: using governor ladder
[ 0.806733] cpuidle: using governor menu
[ 0.806733] Simple Boot Flag at 0x47 set to 0x1
[ 0.806733] ACPI: bus type PCI registered
[ 0.806733] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.806733] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.806733] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.806733] PCI: Using configuration type 1 for base access
[ 0.810335] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.810335] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.810335] ACPI: Added _OSI(Module Device)
[ 0.810335] ACPI: Added _OSI(Processor Device)
[ 0.810335] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.810335] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.810335] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.810335] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.810335] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.826324] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.835175] ACPI: EC: EC started
[ 0.835177] ACPI: EC: interrupt blocked
[ 0.835654] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[ 0.835657] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.835658] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
[ 0.835659] ACPI: Interpreter enabled
[ 0.835684] ACPI: (supports S0 S3 S4 S5)
[ 0.835686] ACPI: Using IOAPIC for interrupt routing
[ 0.835719] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.836203] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 0.838654] ACPI: Power Resource [P0ST] (on)
[ 0.838693] ACPI: Power Resource [P3ST] (on)
[ 0.838783] ACPI: Power Resource [P0SA] (off)
[ 0.838817] ACPI: Power Resource [P3SA] (off)
[ 0.840852] ACPI: Power Resource [P0U2] (off)
[ 0.840890] ACPI: Power Resource [P3U2] (off)
[ 0.841244] ACPI: Power Resource [P0U3] (off)
[ 0.841279] ACPI: Power Resource [P3U3] (off)
[ 0.842698] ACPI: Power Resource [P0SD] (off)
[ 0.842729] ACPI: Power Resource [P3SD] (off)
[ 0.845306] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.845698] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.845704] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.846040] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[ 0.846240] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.846259] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.846687] PCI host bridge to bus 0000:00
[ 0.846690] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.846691] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.846692] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.846694] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.846695] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.846696] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.846698] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfed3ffff window]
[ 0.846699] pci_bus 0000:00: root bus resource [mem 0xfedca000-0xffffffff window]
[ 0.846701] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.846709] pci 0000:00:00.0: [1022:1576] type 00 class 0x060000
[ 0.846862] pci 0000:00:00.2: [1022:1577] type 00 class 0x080600
[ 0.847064] pci 0000:00:01.0: [1002:9874] type 00 class 0x030000
[ 0.847081] pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.847088] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.847093] pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
[ 0.847099] pci 0000:00:01.0: reg 0x24: [mem 0xff700000-0xff73ffff]
[ 0.847104] pci 0000:00:01.0: reg 0x30: [mem 0xff740000-0xff75ffff pref]
[ 0.847107] pci 0000:00:01.0: enabling Extended Tags
[ 0.847116] pci 0000:00:01.0: BAR 0: assigned to efifb
[ 0.847144] pci 0000:00:01.0: supports D1 D2
[ 0.847145] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.847238] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[ 0.847251] pci 0000:00:01.1: reg 0x10: [mem 0xff764000-0xff767fff 64bit]
[ 0.847268] pci 0000:00:01.1: enabling Extended Tags
[ 0.847295] pci 0000:00:01.1: supports D1 D2
[ 0.847375] pci 0000:00:02.0: [1022:157b] type 00 class 0x060000
[ 0.847468] pci 0000:00:02.2: [1022:157c] type 01 class 0x060400
[ 0.847499] pci 0000:00:02.2: enabling Extended Tags
[ 0.847536] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 0.847633] pci 0000:00:02.3: [1022:157c] type 01 class 0x060400
[ 0.847664] pci 0000:00:02.3: enabling Extended Tags
[ 0.847700] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.847793] pci 0000:00:03.0: [1022:157b] type 00 class 0x060000
[ 0.847887] pci 0000:00:03.1: [1022:157c] type 01 class 0x060400
[ 0.847918] pci 0000:00:03.1: enabling Extended Tags
[ 0.847989] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.848091] pci 0000:00:08.0: [1022:1578] type 00 class 0x108000
[ 0.848103] pci 0000:00:08.0: reg 0x10: [mem 0xf0900000-0xf091ffff 64bit pref]
[ 0.848107] pci 0000:00:08.0: reg 0x18: [mem 0xff300000-0xff3fffff]
[ 0.848112] pci 0000:00:08.0: reg 0x1c: [mem 0xff76f000-0xff76ffff]
[ 0.848119] pci 0000:00:08.0: reg 0x24: [mem 0xff76a000-0xff76bfff]
[ 0.848211] pci 0000:00:09.0: [1022:157d] type 00 class 0x060000
[ 0.848306] pci 0000:00:09.2: [1022:157a] type 00 class 0x040300
[ 0.848314] pci 0000:00:09.2: reg 0x10: [mem 0xff760000-0xff763fff]
[ 0.848343] pci 0000:00:09.2: PME# supported from D0 D3hot D3cold
[ 0.848442] pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330
[ 0.848468] pci 0000:00:10.0: reg 0x10: [mem 0xff768000-0xff769fff 64bit]
[ 0.848567] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.848673] pci 0000:00:11.0: [1022:7901] type 00 class 0x010601
[ 0.848691] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.848699] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.848706] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.848714] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.848722] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.848730] pci 0000:00:11.0: reg 0x24: [mem 0xff76d000-0xff76d3ff]
[ 0.848765] pci 0000:00:11.0: PME# supported from D3hot
[ 0.848851] pci 0000:00:12.0: [1022:7908] type 00 class 0x0c0320
[ 0.848869] pci 0000:00:12.0: reg 0x10: [mem 0xff76c000-0xff76c0ff]
[ 0.848937] pci 0000:00:12.0: supports D1 D2
[ 0.848938] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.849020] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.849229] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.849407] pci 0000:00:18.0: [1022:1570] type 00 class 0x060000
[ 0.849487] pci 0000:00:18.1: [1022:1571] type 00 class 0x060000
[ 0.849562] pci 0000:00:18.2: [1022:1572] type 00 class 0x060000
[ 0.849645] pci 0000:00:18.3: [1022:1573] type 00 class 0x060000
[ 0.849724] pci 0000:00:18.4: [1022:1574] type 00 class 0x060000
[ 0.849799] pci 0000:00:18.5: [1022:1575] type 00 class 0x060000
[ 0.849962] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
[ 0.849991] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.850018] pci 0000:01:00.0: reg 0x18: [mem 0xff600000-0xff600fff 64bit]
[ 0.850036] pci 0000:01:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref]
[ 0.850131] pci 0000:01:00.0: supports D1 D2
[ 0.850132] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.850351] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 0.850356] pci 0000:00:02.2: bridge window [io 0xe000-0xefff]
[ 0.850359] pci 0000:00:02.2: bridge window [mem 0xff600000-0xff6fffff]
[ 0.850398] pci 0000:00:02.2: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[ 0.850457] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
[ 0.850483] pci 0000:02:00.0: reg 0x10: [mem 0xff500000-0xff57ffff 64bit]
[ 0.850513] pci 0000:02:00.0: reg 0x30: [mem 0xff580000-0xff58ffff pref]
[ 0.850574] pci 0000:02:00.0: supports D1 D2
[ 0.850575] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.850676] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 0.850681] pci 0000:00:02.3: bridge window [mem 0xff500000-0xff5fffff]
[ 0.850779] pci 0000:03:00.0: [1002:6660] type 00 class 0x038000
[ 0.850805] pci 0000:03:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.850816] pci 0000:03:00.0: reg 0x18: [mem 0xff400000-0xff43ffff 64bit]
[ 0.850823] pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd0ff]
[ 0.850835] pci 0000:03:00.0: reg 0x30: [mem 0xff440000-0xff45ffff pref]
[ 0.850844] pci 0000:03:00.0: enabling Extended Tags
[ 0.850902] pci 0000:03:00.0: supports D1 D2
[ 0.850903] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 0.850938] pci 0000:03:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:00:03.1 (capable of 63.008 Gb/s with 8 GT/s x8 link)
[ 0.851015] pci 0000:00:03.1: PCI bridge to [bus 03]
[ 0.851019] pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
[ 0.851022] pci 0000:00:03.1: bridge window [mem 0xff400000-0xff4fffff]
[ 0.851026] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.859632] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.859705] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.859767] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.859838] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.859903] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.859957] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.860012] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.860115] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.862538] ACPI: EC: interrupt unblocked
[ 0.862538] ACPI: EC: event unblocked
[ 0.862538] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.862538] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.862580] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.862580] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.862580] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.862580] vgaarb: loaded
[ 0.862734] ACPI: bus type USB registered
[ 0.862749] usbcore: registered new interface driver usbfs
[ 0.862756] usbcore: registered new interface driver hub
[ 0.862787] usbcore: registered new device driver usb
[ 0.899975] pps_core: LinuxPPS API ver. 1 registered
[ 0.899977] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.899980] PTP clock support registered
[ 0.900000] EDAC MC: Ver: 3.0.0
[ 0.902644] Registered efivars operations
[ 0.919389] PCI: Using ACPI for IRQ routing
[ 0.920652] PCI: pci_cache_line_size set to 64 bytes
[ 0.920652] Expanded resource Reserved due to conflict with AMD0020:01
[ 0.920652] e820: reserve RAM buffer [mem 0xcd050000-0xcfffffff]
[ 0.920652] e820: reserve RAM buffer [mem 0xce536000-0xcfffffff]
[ 0.920652] e820: reserve RAM buffer [mem 0xcf204000-0xcfffffff]
[ 0.920652] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
[ 0.920652] e820: reserve RAM buffer [mem 0x20f000000-0x20fffffff]
[ 0.920652] NetLabel: Initializing
[ 0.920652] NetLabel: domain hash size = 128
[ 0.920652] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.920652] NetLabel: unlabeled traffic allowed by default
[ 0.920652] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.920652] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.924742] clocksource: Switched to clocksource tsc-early
[ 0.937005] VFS: Disk quotas dquot_6.6.0
[ 0.937031] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.937175] pnp: PnP ACPI init
[ 0.937374] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.937380] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.937461] system 00:01: [mem 0xb0000000-0xcfffffff] could not be reserved
[ 0.937465] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.937582] system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
[ 0.937586] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.937909] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.945490] pnp 00:04: Plug and Play ACPI device, IDs DLL06bd PNP0f13 (active)
[ 0.945526] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.945884] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.945885] system 00:06: [io 0x040b] has been reserved
[ 0.945887] system 00:06: [io 0x04d6] has been reserved
[ 0.945888] system 00:06: [io 0x0c00-0x0c01] has been reserved
[ 0.945890] system 00:06: [io 0x0c14] has been reserved
[ 0.945891] system 00:06: [io 0x0c50-0x0c51] has been reserved
[ 0.945892] system 00:06: [io 0x0c52] has been reserved
[ 0.945894] system 00:06: [io 0x0c6c] has been reserved
[ 0.945895] system 00:06: [io 0x0c6f] has been reserved
[ 0.945896] system 00:06: [io 0x0cd0-0x0cd1] has been reserved
[ 0.945898] system 00:06: [io 0x0cd2-0x0cd3] has been reserved
[ 0.945899] system 00:06: [io 0x0cd4-0x0cd5] has been reserved
[ 0.945900] system 00:06: [io 0x0cd6-0x0cd7] has been reserved
[ 0.945902] system 00:06: [io 0x0cd8-0x0cdf] has been reserved
[ 0.945903] system 00:06: [io 0x0800-0x089f] has been reserved
[ 0.945904] system 00:06: [io 0x0b20-0x0b3f] has been reserved
[ 0.945906] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.945907] system 00:06: [io 0x0910-0x091f] has been reserved
[ 0.945909] system 00:06: [io 0xfe00-0xfefe] has been reserved
[ 0.945912] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.945914] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.945915] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.945917] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.945918] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.945920] system 00:06: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.945921] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.945923] system 00:06: [mem 0xff800000-0xffffffff] has been reserved
[ 0.945927] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.946456] pnp: PnP ACPI: found 7 devices
[ 0.952490] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.952523] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 0.952525] pci 0000:00:02.2: bridge window [io 0xe000-0xefff]
[ 0.952529] pci 0000:00:02.2: bridge window [mem 0xff600000-0xff6fffff]
[ 0.952532] pci 0000:00:02.2: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[ 0.952536] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 0.952539] pci 0000:00:02.3: bridge window [mem 0xff500000-0xff5fffff]
[ 0.952545] pci 0000:00:03.1: PCI bridge to [bus 03]
[ 0.952547] pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
[ 0.952550] pci 0000:00:03.1: bridge window [mem 0xff400000-0xff4fffff]
[ 0.952553] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.952559] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.952560] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.952562] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.952563] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.952564] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.952566] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.952567] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xfed3ffff window]
[ 0.952568] pci_bus 0000:00: resource 11 [mem 0xfedca000-0xffffffff window]
[ 0.952570] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.952571] pci_bus 0000:01: resource 1 [mem 0xff600000-0xff6fffff]
[ 0.952572] pci_bus 0000:01: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
[ 0.952574] pci_bus 0000:02: resource 1 [mem 0xff500000-0xff5fffff]
[ 0.952575] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.952577] pci_bus 0000:03: resource 1 [mem 0xff400000-0xff4fffff]
[ 0.952578] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.952709] NET: Registered protocol family 2
[ 0.953512] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.953546] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.953710] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.953945] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.954018] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.954062] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.954169] NET: Registered protocol family 1
[ 0.954176] NET: Registered protocol family 44
[ 0.954194] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.954200] pci 0000:00:01.1: Linked as a consumer to 0000:00:01.0
[ 0.975564] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6ad took 20546 usecs
[ 0.975597] PCI: CLS 0 bytes, default 64
[ 0.975654] Unpacking initramfs...
[ 1.328174] Freeing initrd memory: 23596K
[ 1.328202] AMD-Vi: IOMMU performance counters supported
[ 1.328372] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 1.328374] pci 0000:00:00.2: PCI INT A: not connected
[ 1.328777] iommu: Adding device 0000:00:01.0 to group 0
[ 1.328840] iommu: Using direct mapping for device 0000:00:01.0
[ 1.328872] iommu: Adding device 0000:00:01.1 to group 0
[ 1.328927] iommu: Adding device 0000:00:02.0 to group 1
[ 1.328944] iommu: Adding device 0000:00:02.2 to group 1
[ 1.328962] iommu: Adding device 0000:00:02.3 to group 1
[ 1.329034] iommu: Adding device 0000:00:03.0 to group 2
[ 1.329051] iommu: Adding device 0000:00:03.1 to group 2
[ 1.329114] iommu: Adding device 0000:00:08.0 to group 3
[ 1.329185] iommu: Adding device 0000:00:09.0 to group 4
[ 1.329203] iommu: Adding device 0000:00:09.2 to group 4
[ 1.329266] iommu: Adding device 0000:00:10.0 to group 5
[ 1.329333] iommu: Adding device 0000:00:11.0 to group 6
[ 1.329397] iommu: Adding device 0000:00:12.0 to group 7
[ 1.329476] iommu: Adding device 0000:00:14.0 to group 8
[ 1.329492] iommu: Adding device 0000:00:14.3 to group 8
[ 1.329652] iommu: Adding device 0000:00:18.0 to group 9
[ 1.329672] iommu: Adding device 0000:00:18.1 to group 9
[ 1.329694] iommu: Adding device 0000:00:18.2 to group 9
[ 1.329720] iommu: Adding device 0000:00:18.3 to group 9
[ 1.329774] iommu: Adding device 0000:00:18.4 to group 9
[ 1.329791] iommu: Adding device 0000:00:18.5 to group 9
[ 1.329812] iommu: Adding device 0000:01:00.0 to group 1
[ 1.329826] iommu: Adding device 0000:02:00.0 to group 1
[ 1.329841] iommu: Adding device 0000:03:00.0 to group 2
[ 1.330370] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 1.330371] AMD-Vi: Extended features (0x37ef22294ada):
[ 1.330372] PPR NX GT IA GA PC GA_vAPIC
[ 1.330375] AMD-Vi: Interrupt remapping enabled
[ 1.330375] AMD-Vi: Virtual APIC enabled
[ 1.330877] AMD-Vi: Lazy IO/TLB flushing enabled
[ 1.333008] amd_uncore: AMD NB counters detected
[ 1.333148] LVT offset 0 assigned for vector 0x400
[ 1.333193] perf: AMD IBS detected (0x000007ff)
[ 1.333210] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 1.333296] check: Scanning for low memory corruption every 60 seconds
[ 1.334221] Initialise system trusted keyrings
[ 1.334235] Key type blacklist registered
[ 1.334460] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 1.336152] zbud: loaded
[ 1.406977] Key type asymmetric registered
[ 1.406980] Asymmetric key parser 'x509' registered
[ 1.407005] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 1.407105] io scheduler mq-deadline registered
[ 1.407107] io scheduler kyber registered
[ 1.407182] io scheduler bfq registered
[ 1.407725] pcieport 0000:00:02.2: Signaling PME with IRQ 26
[ 1.407875] pcieport 0000:00:02.3: Signaling PME with IRQ 27
[ 1.408021] pcieport 0000:00:03.1: Signaling PME with IRQ 29
[ 1.408043] pciehp 0000:00:03.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
[ 1.408330] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.408436] efifb: probing for efifb
[ 1.408462] efifb: showing boot graphics
[ 1.409599] efifb: framebuffer at 0xd0000000, using 4224k, total 4224k
[ 1.409601] efifb: mode is 1366x768x32, linelength=5632, pages=1
[ 1.409601] efifb: scrolling: redraw
[ 1.409603] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.409833] fbcon: Deferring console take-over
[ 1.409834] fb0: EFI VGA frame buffer device
[ 1.409931] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.409939] ACPI: Lid Switch [LID]
[ 1.409977] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.409984] ACPI: Sleep Button [SLPB]
[ 1.410024] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.412097] ACPI: Power Button [PWRF]
[ 1.412276] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.412739] acpi device:02: registered as cooling_device0
[ 1.412788] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.412829] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 1.413057] acpi device:0b: registered as cooling_device1
[ 1.413100] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input4
[ 1.413948] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.415154] usbcore: registered new interface driver usbserial_generic
[ 1.415162] usbserial: USB Serial support registered for generic
[ 1.415186] rtc_cmos 00:03: RTC can wake from S4
[ 1.415339] rtc_cmos 00:03: registered as rtc0
[ 1.415355] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.415466] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.415774] NET: Registered protocol family 10
[ 1.426431] Segment Routing with IPv6
[ 1.426465] NET: Registered protocol family 17
[ 1.426836] RAS: Correctable Errors collector initialized.
[ 1.426890] microcode: CPU0: patch_level=0x06006110
[ 1.426898] microcode: CPU1: patch_level=0x06006110
[ 1.426909] microcode: CPU2: patch_level=0x06006110
[ 1.426918] microcode: CPU3: patch_level=0x06006110
[ 1.426980] microcode: Microcode Update Driver: v2.2.
[ 1.426997] sched_clock: Marking stable (1382850363, 44124321)->(1560044629, -133069945)
[ 1.427240] registered taskstats version 1
[ 1.427250] Loading compiled-in X.509 certificates
[ 1.432647] Loaded X.509 cert 'Build time autogenerated kernel key: 08060efdcbd727771bd890c73e97df54177ee3a6'
[ 1.432690] zswap: loaded using pool lzo/zbud
[ 1.442927] Key type big_key registered
[ 1.443398] Magic number: 11:924:787
[ 1.443646] rtc_cmos 00:03: setting system clock to 2019-03-31T13:47:10 UTC (1554040030)
[ 1.445680] Freeing unused decrypted memory: 2040K
[ 1.446488] Freeing unused kernel image memory: 1536K
[ 1.455459] Write protecting the kernel read-only data: 18432k
[ 1.456337] Freeing unused kernel image memory: 2016K
[ 1.456653] Freeing unused kernel image memory: 376K
[ 1.466980] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.466989] Run /init as init process
[ 1.546432] fbcon: Taking over console
[ 1.546525] Console: switching to colour frame buffer device 170x48
[ 1.553867] Linux agpgart interface v0.103
[ 1.583635] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.672308] [drm] amdgpu kernel modesetting enabled.
[ 1.672339] vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
[ 1.673054] ATPX version 1, functions 0x00000003
[ 1.673242] Parsing CRAT table with 1 nodes
[ 1.673245] Creating topology SYSFS entries
[ 1.673268] Topology: Add APU node [0x0:0x0]
[ 1.673269] Finished initializing topology
[ 1.673334] checking generic (d0000000 420000) vs hw (d0000000 10000000)
[ 1.673336] fb0: switching to amdgpudrmfb from EFI VGA
[ 1.673365] Console: switching to colour dummy device 80x25
[ 1.673772] [drm] initializing kernel modesetting (CARRIZO 0x1002:0x9874 0x1028:0x06BD 0xC5).
[ 1.673790] [drm] register mmio base: 0xFF700000
[ 1.673791] [drm] register mmio size: 262144
[ 1.673794] [drm] add ip block number 0 <vi_common>
[ 1.673795] [drm] add ip block number 1 <gmc_v8_0>
[ 1.673797] [drm] add ip block number 2 <cz_ih>
[ 1.673798] [drm] add ip block number 3 <gfx_v8_0>
[ 1.673800] [drm] add ip block number 4 <sdma_v3_0>
[ 1.673801] [drm] add ip block number 5 <powerplay>
[ 1.673802] [drm] add ip block number 6 <dm>
[ 1.673803] [drm] add ip block number 7 <uvd_v6_0>
[ 1.673804] [drm] add ip block number 8 <vce_v3_0>
[ 1.673805] [drm] add ip block number 9 <acp_ip>
[ 1.673821] [drm] UVD is enabled in physical mode
[ 1.673825] [drm] VCE enabled in physical mode
[ 1.673861] ATOM BIOS: BR46441.001
[ 1.673899] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[ 1.673907] amdgpu 0000:00:01.0: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
[ 1.673909] amdgpu 0000:00:01.0: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF
[ 1.673914] [drm] Detected VRAM RAM=512M, BAR=512M
[ 1.673915] [drm] RAM width 64bits UNKNOWN
[ 1.674324] [TTM] Zone kernel: Available graphics memory: 3830198 kiB
[ 1.674326] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.674327] [TTM] Initializing pool allocator
[ 1.674332] [TTM] Initializing DMA pool allocator
[ 1.674384] [drm] amdgpu: 512M of VRAM memory ready
[ 1.674385] [drm] amdgpu: 3072M of GTT memory ready.
[ 1.674412] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 1.674447] [drm] PCIE GART of 1024M enabled (table at 0x000000F400401000).
[ 1.676529] [drm] Found UVD firmware Version: 1.91 Family ID: 11
[ 1.676534] [drm] UVD ENC is disabled
[ 1.677105] [drm] Found VCE firmware Version: 52.4 Binary ID: 3
[ 1.677494] smu version 18.56.00
[ 1.682286] [drm] DM_PPLIB: values for Engine clock
[ 1.682288] [drm] DM_PPLIB: 300000
[ 1.682289] [drm] DM_PPLIB: 360000
[ 1.682289] [drm] DM_PPLIB: 423530
[ 1.682290] [drm] DM_PPLIB: 514290
[ 1.682290] [drm] DM_PPLIB: 626090
[ 1.682290] [drm] DM_PPLIB: 720000
[ 1.682291] [drm] DM_PPLIB: 757900
[ 1.682291] [drm] DM_PPLIB: 800000
[ 1.682292] [drm] DM_PPLIB: Validation clocks:
[ 1.682293] [drm] DM_PPLIB: engine_max_clock: 80000
[ 1.682293] [drm] DM_PPLIB: memory_max_clock: 80000
[ 1.682294] [drm] DM_PPLIB: level : 8
[ 1.682295] [drm] DM_PPLIB: values for Display clock
[ 1.682296] [drm] DM_PPLIB: 300000
[ 1.682296] [drm] DM_PPLIB: 400000
[ 1.682297] [drm] DM_PPLIB: 496560
[ 1.682297] [drm] DM_PPLIB: 626090
[ 1.682298] [drm] DM_PPLIB: 685720
[ 1.682298] [drm] DM_PPLIB: 757900
[ 1.682298] [drm] DM_PPLIB: 800000
[ 1.682299] [drm] DM_PPLIB: 847060
[ 1.682299] [drm] DM_PPLIB: Validation clocks:
[ 1.682300] [drm] DM_PPLIB: engine_max_clock: 80000
[ 1.682300] [drm] DM_PPLIB: memory_max_clock: 80000
[ 1.682301] [drm] DM_PPLIB: level : 8
[ 1.682302] [drm] DM_PPLIB: values for Memory clock
[ 1.682302] [drm] DM_PPLIB: 333000
[ 1.682303] [drm] DM_PPLIB: 800000
[ 1.682303] [drm] DM_PPLIB: Validation clocks:
[ 1.682303] [drm] DM_PPLIB: engine_max_clock: 80000
[ 1.682304] [drm] DM_PPLIB: memory_max_clock: 80000
[ 1.682304] [drm] DM_PPLIB: level : 8
[ 1.682486] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3
[ 1.702736] [drm] Display Core initialized with v3.2.08!
[ 1.709097] [drm] SADs count is: -2, don't need to read it
[ 1.710425] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.710426] [drm] Driver supports precise vblank timestamp query.
[ 1.736604] [drm] UVD initialized successfully.
[ 1.937432] [drm] VCE initialized successfully.
[ 1.940457] kfd kfd: Allocated 3969056 bytes on gart
[ 1.940476] Topology: Add APU node [0x9874:0x1002]
[ 1.940652] kfd kfd: added device 1002:9874
[ 1.942090] [drm] fb mappable at 0x20F9E5000
[ 1.942092] [drm] vram apper at 0x20F000000
[ 1.942093] [drm] size 4325376
[ 1.942094] [drm] fb depth is 24
[ 1.942095] [drm] pitch is 5632
[ 1.942205] fbcon: amdgpudrmfb (fb0) is primary device
[ 1.947645] Console: switching to colour frame buffer device 170x48
[ 1.966644] amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device
[ 2.005039] [drm] Initialized amdgpu 3.27.0 20150101 for 0000:00:01.0 on minor 0
[ 2.005122] amdgpu 0000:03:00.0: enabling device (0000 -> 0003)
[ 2.005410] amdgpu 0000:03:00.0: SI support provided by radeon.
[ 2.005413] amdgpu 0000:03:00.0: Use radeon.si_support=0 amdgpu.si_support=1 to override.
[ 2.037225] [drm] radeon kernel modesetting enabled.
[ 2.037256] vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
[ 2.038206] ATPX version 1, functions 0x00000003
[ 2.038728] [drm] initializing kernel modesetting (HAINAN 0x1002:0x6660 0x1028:0x06BD 0x81).
[ 2.038743] vga_switcheroo: enabled
[ 2.100116] ATOM BIOS: Dell/Compal
[ 2.100130] [drm] GPU not posted. posting now...
[ 2.105495] radeon 0000:03:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 2.105496] radeon 0000:03:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[ 2.105501] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 2.105502] [drm] RAM width 64bits DDR
[ 2.105514] [drm] radeon: 2048M of VRAM memory ready
[ 2.105515] [drm] radeon: 2048M of GTT memory ready.
[ 2.105530] [drm] Loading hainan Microcode
[ 2.105676] [drm] Internal thermal controller without fan control
[ 2.112902] [drm] radeon: dpm initialized
[ 2.112915] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 2.115218] [drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[ 2.352689] tsc: Refined TSC clocksource calibration: 1796.627 MHz
[ 2.352733] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e5b73c0b8, max_idle_ns: 440795215505 ns
[ 2.352853] clocksource: Switched to clocksource tsc
[ 3.206664] ACPI Error: Needed type [Reference], found [Integer] 00000000bb3c1b35 (20181213/exresop-69)
[ 3.206676] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
[ 3.206687] ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 3.206697] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 3.206704] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 3.666502] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 3.666664] radeon 0000:03:00.0: WB enabled
[ 3.666669] radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000ccce0b72
[ 3.666672] radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000012ac8d4
[ 3.666675] radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000eca36fa0
[ 3.666678] radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000fba0b491
[ 3.666681] radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006b2c4734
[ 3.666683] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.666684] [drm] Driver supports precise vblank timestamp query.
[ 3.666686] radeon 0000:03:00.0: radeon: MSI limited to 32-bit
[ 3.666765] radeon 0000:03:00.0: radeon: using MSI.
[ 3.666794] [drm] radeon: irq initialized.
[ 4.082323] [drm] ring test on 0 succeeded in 1 usecs
[ 4.082333] [drm] ring test on 1 succeeded in 1 usecs
[ 4.082342] [drm] ring test on 2 succeeded in 1 usecs
[ 4.082353] [drm] ring test on 3 succeeded in 3 usecs
[ 4.082362] [drm] ring test on 4 succeeded in 3 usecs
[ 4.082675] [drm] ib test on ring 0 succeeded in 0 usecs
[ 4.082716] [drm] ib test on ring 1 succeeded in 0 usecs
[ 4.082746] [drm] ib test on ring 2 succeeded in 0 usecs
[ 4.082768] [drm] ib test on ring 3 succeeded in 0 usecs
[ 4.082786] [drm] ib test on ring 4 succeeded in 0 usecs
[ 4.083303] [drm] Radeon Display Connectors
[ 4.085924] [drm] Initialized radeon 2.50.0 20080528 for 0000:03:00.0 on minor 1
[ 4.188815] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.210399] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.210463] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.228929] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.229111] SCSI subsystem initialized
[ 4.231733] ehci-pci: EHCI PCI platform driver
[ 4.232032] ehci-pci 0000:00:12.0: EHCI Host Controller
[ 4.232042] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 4.232064] ehci-pci 0000:00:12.0: debug port 2
[ 4.232141] ehci-pci 0000:00:12.0: irq 18, io mem 0xff76c000
[ 4.242774] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
[ 4.244179] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[ 4.244184] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.244187] usb usb1: Product: EHCI Host Controller
[ 4.244189] usb usb1: Manufacturer: Linux 5.0.5-arch1-1-ARCH ehci_hcd
[ 4.244192] usb usb1: SerialNumber: 0000:00:12.0
[ 4.244814] hub 1-0:1.0: USB hub found
[ 4.244828] hub 1-0:1.0: 2 ports detected
[ 4.246151] ACPI Error: Needed type [Reference], found [Integer] 000000005ff8077b (20181213/exresop-69)
[ 4.246162] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
[ 4.246175] ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 4.246185] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 4.246195] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 4.246958] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 4.246971] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 4.247247] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
[ 4.248342] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[ 4.248346] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.248350] usb usb2: Product: xHCI Host Controller
[ 4.248353] usb usb2: Manufacturer: Linux 5.0.5-arch1-1-ARCH xhci-hcd
[ 4.248355] usb usb2: SerialNumber: 0000:00:10.0
[ 4.249545] hub 2-0:1.0: USB hub found
[ 4.249566] hub 2-0:1.0: 4 ports detected
[ 4.251517] libata version 3.00 loaded.
[ 4.251673] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 4.251683] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 4.251691] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[ 4.259820] ahci 0000:00:11.0: version 3.0
[ 4.260191] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 4.260198] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
[ 4.260503] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.260570] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[ 4.260574] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.260578] usb usb3: Product: xHCI Host Controller
[ 4.260581] usb usb3: Manufacturer: Linux 5.0.5-arch1-1-ARCH xhci-hcd
[ 4.260584] usb usb3: SerialNumber: 0000:00:10.0
[ 4.260926] hub 3-0:1.0: USB hub found
[ 4.261078] hub 3-0:1.0: 4 ports detected
[ 4.261846] usb: port power management may be unreliable
[ 4.265756] scsi host0: ahci
[ 4.266909] scsi host1: ahci
[ 4.267136] ata1: SATA max UDMA/133 abar m1024@0xff76d000 port 0xff76d100 irq 19
[ 4.267141] ata2: SATA max UDMA/133 abar m1024@0xff76d000 port 0xff76d180 irq 19
[ 4.269780] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 4.572669] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 4.579322] usb 2-1: new full-speed USB device number 2 using xhci_hcd
[ 4.719859] usb 1-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
[ 4.719865] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.720278] hub 1-1:1.0: USB hub found
[ 4.720346] hub 1-1:1.0: 4 ports detected
[ 4.732673] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.733126] ata1.00: supports DRM functions and may not be fully accessible
[ 4.733192] ata1.00: ATA-11: KINGSTON SUV500240G, 003056RA, max UDMA/133
[ 4.733196] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 4.733979] ata1.00: Trusted Computing capability qword not valid!
[ 4.734527] ata1.00: supports DRM functions and may not be fully accessible
[ 4.735363] ata1.00: Trusted Computing capability qword not valid!
[ 4.735376] ata1.00: configured for UDMA/133
[ 4.735917] scsi 0:0:0:0: Direct-Access ATA KINGSTON SUV5002 56RA PQ: 0 ANSI: 5
[ 4.735927] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.739300] usb 2-1: New USB device found, idVendor=0cf3, idProduct=e005, bcdDevice= 0.01
[ 4.739304] ata2.00: ATAPI: PLDS DVD+/-RW DU-8A5LH, 6D11, max UDMA/133
[ 4.739309] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.740146] ata2.00: configured for UDMA/133
[ 4.752926] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DU-8A5LH 6D11 PQ: 0 ANSI: 5
[ 4.796929] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 4.796938] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 4.796982] sd 0:0:0:0: [sda] Write Protect is off
[ 4.796989] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.797035] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.797098] sd 0:0:0:0: [sda] Optimal transfer size 0 bytes < PAGE_SIZE (4096 bytes)
[ 4.803162] sda: sda1 sda2
[ 4.804120] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.821414] random: fast init done
[ 4.840790] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.840796] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.841299] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.872698] usb 2-4: new high-speed USB device number 3 using xhci_hcd
[ 4.999337] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 5.087514] usb 2-4: New USB device found, idVendor=0c45, idProduct=6712, bcdDevice=51.05
[ 5.087520] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 5.087524] usb 2-4: Product: Integrated_Webcam_HD
[ 5.087526] usb 2-4: Manufacturer: CN0V359T724876BPAFYLA00
[ 5.096936] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60
[ 5.096942] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.096945] usb 1-1.1: Product: USB2.0-CRW
[ 5.096948] usb 1-1.1: Manufacturer: Generic
[ 5.096950] usb 1-1.1: SerialNumber: 20100201396000000
[ 5.105406] usbcore: registered new interface driver rtsx_usb
[ 5.289604] ACPI Error: Needed type [Reference], found [Integer] 00000000f315bb67 (20181213/exresop-69)
[ 5.289614] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
[ 5.289624] ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 5.289633] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 5.289640] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 5.362875] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.536233] systemd[1]: systemd 241.7-2-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 5.553008] systemd[1]: Detected architecture x86-64.
[ 5.558057] systemd[1]: Set hostname to <arch>.
[ 5.768261] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.768330] systemd[1]: Reached target Remote File Systems.
[ 5.768681] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.768956] systemd[1]: Listening on Journal Audit Socket.
[ 5.768994] systemd[1]: Reached target Swap.
[ 5.771667] systemd[1]: Created slice system-getty.slice.
[ 5.771802] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.803425] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 5.806824] acpi_call: loading out-of-tree module taints kernel.
[ 5.806900] acpi_call: module verification failed: signature and/or required key missing - tainting kernel
[ 5.821050] random: lvm: uninitialized urandom read (4 bytes read)
[ 5.867760] random: systemd-random-: uninitialized urandom read (512 bytes read)
[ 6.354603] audit: type=1130 audit(1554040035.406:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.449714] systemd-journald[290]: Received request to flush runtime journal from PID 1
[ 6.472226] audit: type=1130 audit(1554040035.522:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.556924] AMD0020:00: ttyS0 at MMIO 0xfedc6000 (irq = 10, base_baud = 3000000) is a 16550A
[ 6.558224] AMD0020:01: ttyS1 at MMIO 0xfedc8000 (irq = 11, base_baud = 3000000) is a 16550A
[ 6.561846] acpi_cpufreq: overriding BIOS provided _PSD data
[ 6.599883] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.608644] ACPI: AC Adapter [ACAD] (off-line)
[ 6.626454] i2c_hid i2c-DLL07BD:00: i2c-DLL07BD:00 supply vdd not found, using dummy regulator
[ 6.626501] i2c_hid i2c-DLL07BD:00: Linked as a consumer to regulator.0
[ 6.626505] i2c_hid i2c-DLL07BD:00: i2c-DLL07BD:00 supply vddl not found, using dummy regulator
[ 6.666149] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 6.675178] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 6.676874] tpm_crb MSFT0101:00: can't request region for resource [mem 0xce026000-0xce026fff]
[ 6.676885] tpm_crb: probe of MSFT0101:00 failed with error -16
[ 6.762820] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 6.764979] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.764984] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 6.801770] cryptd: max_cpu_qlen set to 1000
[ 6.805624] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 6.829976] audit: type=1130 audit(1554040035.882:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.829995] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[ 6.830003] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[ 6.839681] audit: type=1130 audit(1554040035.892:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:amdgpu_bl0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.841388] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[ 6.860294] input: DLL07BD:00 06CB:75BF Mouse as /devices/platform/AMD0010:00/i2c-0/i2c-DLL07BD:00/0018:06CB:75BF.0001/input/input8
[ 6.862457] input: DLL07BD:00 06CB:75BF Touchpad as /devices/platform/AMD0010:00/i2c-0/i2c-DLL07BD:00/0018:06CB:75BF.0001/input/input9
[ 6.875955] hid-generic 0018:06CB:75BF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL07BD:00 06CB:75BF] on i2c-DLL07BD:00
[ 6.913588] audit: type=1130 audit(1554040035.966:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.936718] dell-smbios A80593CE-A997-11DA-B012-B622A1EF5492: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS
[ 6.937636] libphy: r8169: probed
[ 6.937989] r8169 0000:01:00.0 eth0: RTL8106e, 18:db:f2:22:e1:de, XID 449, IRQ 40
[ 6.941629] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input11
[ 6.969723] AVX2 version of gcm_enc/dec engaged.
[ 6.969726] AES CTR mode by8 optimization enabled
[ 6.978724] input: DLL07BD:00 06CB:75BF Touchpad as /devices/platform/AMD0010:00/i2c-0/i2c-DLL07BD:00/0018:06CB:75BF.0001/input/input13
[ 6.978862] hid-multitouch 0018:06CB:75BF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL07BD:00 06CB:75BF] on i2c-DLL07BD:00
[ 7.004408] mousedev: PS/2 mouse device common for all mice
[ 7.039564] audit: type=1130 audit(1554040036.092:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.051487] r8169 0000:01:00.0 enp1s0: renamed from eth0
[ 7.077895] snd_hda_intel 0000:00:01.1: enabling device (0000 -> 0002)
[ 7.078178] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 7.078618] snd_hda_intel 0000:00:09.2: enabling device (0004 -> 0006)
[ 7.104823] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input16
[ 7.170459] audit: type=1130 audit(1554040036.222:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.188929] audit: type=1130 audit(1554040036.239:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.206278] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3234: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 7.206284] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.206288] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 7.206290] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 7.206292] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 7.206297] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19
[ 7.206300] snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x1a
[ 7.206303] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 7.216464] audit: type=1127 audit(1554040036.269:10): pid=445 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[ 7.221431] audit: type=1130 audit(1554040036.272:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.221742] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.248232] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.248303] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 7.248306] cfg80211: failed to load regulatory.db
[ 7.257892] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:09.2/sound/card1/input17
[ 7.259003] input: HD-Audio Generic Headphone Mic as /devices/pci0000:00/0000:00:09.2/sound/card1/input18
[ 7.346223] ACPI Error: Needed type [Reference], found [Integer] 00000000ee3c094d (20181213/exresop-69)
[ 7.346233] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
[ 7.346240] ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 7.346247] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 7.346253] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 7.418241] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 7.435046] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 7.460696] kvm: Nested Virtualization enabled
[ 7.460700] kvm: Nested Paging enabled
[ 7.460701] SVM: Virtual VMLOAD VMSAVE supported
[ 7.460701] SVM: Virtual GIF supported
[ 7.466994] MCE: In-kernel MCE decoding enabled.
[ 7.550659] EDAC amd64: Node 0: DRAM ECC disabled.
[ 7.550662] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 7.569518] random: NetworkManager: uninitialized urandom read (16 bytes read)
[ 7.583725] EDAC amd64: Node 0: DRAM ECC disabled.
[ 7.583728] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 7.588240] ath9k 0000:02:00.0: enabling device (0000 -> 0002)
[ 7.588469] ath: phy0: WB335 2-ANT card detected
[ 7.588471] ath: phy0: Set BT/WLAN RX diversity capability
[ 7.596574] ath: phy0: Enable LNA combining
[ 7.597699] ath: phy0: ASPM enabled: 0x42
[ 7.597702] ath: EEPROM regdomain: 0x6c
[ 7.597703] ath: EEPROM indicates we should expect a direct regpair map
[ 7.597706] ath: Country alpha2 being used: 00
[ 7.597707] ath: Regpair used: 0x6c
[ 7.621203] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 7.622048] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffff9d22c2e80000, irq=44
[ 7.625551] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 7.981200] Generic PHY r8169-100:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[ 8.230500] r8169 0000:01:00.0 enp1s0: Link is Down
[ 8.260405] random: crng init done
[ 8.260409] random: 1 urandom warning(s) missed due to ratelimiting
[ 8.331167] media: Linux media interface: v0.10
[ 8.372020] videodev: Linux video capture interface: v2.00
[ 8.382945] Bluetooth: Core ver 2.22
[ 8.382973] NET: Registered protocol family 31
[ 8.382974] Bluetooth: HCI device and connection manager initialized
[ 8.382979] Bluetooth: HCI socket layer initialized
[ 8.382982] Bluetooth: L2CAP socket layer initialized
[ 8.382987] Bluetooth: SCO socket layer initialized
[ 8.517154] usbcore: registered new interface driver btusb
[ 8.519435] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6712)
[ 8.547048] usb 2-1: USB disconnect, device number 2
[ 8.553579] usbcore: registered new interface driver ath3k
[ 8.585201] uvcvideo 2-4:1.0: Entity type for entity Extension 4 was not initialized!
[ 8.585208] uvcvideo 2-4:1.0: Entity type for entity Extension 3 was not initialized!
[ 8.585212] uvcvideo 2-4:1.0: Entity type for entity Processing 2 was not initialized!
[ 8.585216] uvcvideo 2-4:1.0: Entity type for entity Camera 1 was not initialized!
[ 8.585380] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:10.0/usb2/2-4/2-4:1.0/input/input19
[ 8.585657] usbcore: registered new interface driver uvcvideo
[ 8.585662] USB Video Class driver (1.1.1)
[ 8.849367] usb 2-1: new full-speed USB device number 4 using xhci_hcd
[ 9.006916] usb 2-1: New USB device found, idVendor=0cf3, idProduct=e005, bcdDevice= 0.02
[ 9.006920] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 14.241466] kauditd_printk_skb: 14 callbacks suppressed
[ 14.241472] audit: type=1130 audit(1554040043.292:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-wait-online comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 14.567110] audit: type=1131 audit(1554040043.619:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 14.869324] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 14.872669] Bridge firewalling registered
[ 14.919576] audit: type=1325 audit(1554040043.969:28): table=filter family=2 entries=0
[ 14.935989] audit: type=1325 audit(1554040043.986:29): table=nat family=2 entries=0
[ 14.960046] audit: type=1325 audit(1554040044.012:30): table=nat family=2 entries=5
[ 14.962723] audit: type=1325 audit(1554040044.016:31): table=filter family=2 entries=4
[ 14.965667] audit: type=1325 audit(1554040044.016:32): table=filter family=2 entries=6
[ 14.968682] audit: type=1325 audit(1554040044.019:33): table=filter family=2 entries=8
[ 14.971407] audit: type=1325 audit(1554040044.022:34): table=filter family=2 entries=10
[ 14.974208] audit: type=1325 audit(1554040044.026:35): table=filter family=2 entries=11
[ 14.985651] Initializing XFRM netlink socket
[ 15.849365] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 15.849885] ata1.00: supports DRM functions and may not be fully accessible
[ 15.850873] ata1.00: Trusted Computing capability qword not valid!
[ 15.851384] ata1.00: supports DRM functions and may not be fully accessible
[ 15.852195] ata1.00: Trusted Computing capability qword not valid!
[ 15.852211] ata1.00: configured for UDMA/133
[ 17.957538] wlp2s0: authenticate with 00:1d:e5:4c:61:f0
[ 17.975439] wlp2s0: send auth to 00:1d:e5:4c:61:f0 (try 1/3)
[ 17.977142] wlp2s0: authenticated
[ 17.979288] wlp2s0: associate with 00:1d:e5:4c:61:f0 (try 1/3)
[ 17.985594] wlp2s0: RX AssocResp from 00:1d:e5:4c:61:f0 (capab=0x431 status=0 aid=133)
[ 17.985775] wlp2s0: associated
[ 18.029863] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:1d:e5:4c:61:f0
[ 18.101429] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 29.059504] kauditd_printk_skb: 39 callbacks suppressed
[ 29.059507] audit: type=1131 audit(1554040058.112:75): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 31.936363] [drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[ 33.478694] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[ 33.478849] radeon 0000:03:00.0: WB enabled
[ 33.478852] radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x00000000ccce0b72
[ 33.478854] radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0x00000000012ac8d4
[ 33.478855] radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0x00000000eca36fa0
[ 33.478857] radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000fba0b491
[ 33.478858] radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0x000000006b2c4734
[ 33.874213] [drm] ring test on 0 succeeded in 1 usecs
[ 33.874222] [drm] ring test on 1 succeeded in 1 usecs
[ 33.874228] [drm] ring test on 2 succeeded in 1 usecs
[ 33.874240] [drm] ring test on 3 succeeded in 4 usecs
[ 33.874248] [drm] ring test on 4 succeeded in 3 usecs
[ 33.874361] [drm] ib test on ring 0 succeeded in 0 usecs
[ 33.874383] [drm] ib test on ring 1 succeeded in 0 usecs
[ 33.874424] [drm] ib test on ring 2 succeeded in 0 usecs
[ 33.874441] [drm] ib test on ring 3 succeeded in 0 usecs
[ 33.874456] [drm] ib test on ring 4 succeeded in 0 usecs
[ 35.764730] audit: type=1130 audit(1554040064.816:76): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 37.893407] audit: type=1131 audit(1554040066.946:77): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 59.793034] ACPI Error: Needed type [Reference], found [Integer] 00000000eca093a4 (20181213/exresop-69)
[ 59.793050] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
[ 59.793061] ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 59.793069] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 59.793076] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 61.853015] ACPI Error: Needed type [Reference], found [Integer] 00000000b79f1dd3 (20181213/exresop-69)
[ 61.853033] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
[ 61.853046] ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 61.853056] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 61.853065] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 115.319478] ACPI Error: Needed type [Reference], found [Integer] 000000000b6fadc7 (20181213/exresop-69)
[ 115.319491] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
[ 115.319503] ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 115.319514] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 115.319523] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 116.346329] ACPI Error: Needed type [Reference], found [Integer] 0000000056a3e452 (20181213/exresop-69)
[ 116.346346] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
[ 116.346359] ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 116.346369] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 116.346378] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 117.379708] ACPI Error: Needed type [Reference], found [Integer] 00000000eca093a4 (20181213/exresop-69)
[ 117.379725] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
[ 117.379738] ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 117.379748] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 117.379757] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 119.436307] ACPI Error: Needed type [Reference], found [Integer] 00000000701f0d7f (20181213/exresop-69)
[ 119.436324] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
[ 119.436337] ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 119.436347] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 119.436356] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 219.926003] wlp2s0: disconnect from AP 00:1d:e5:4c:61:f0 for new auth to 00:22:90:c6:55:50
[ 219.935938] wlp2s0: authenticate with 00:22:90:c6:55:50
[ 219.947802] wlp2s0: send auth to 00:22:90:c6:55:50 (try 1/3)
[ 220.052715] wlp2s0: send auth to 00:22:90:c6:55:50 (try 2/3)
[ 220.054486] wlp2s0: authenticated
[ 220.056126] wlp2s0: associate with 00:22:90:c6:55:50 (try 1/3)
[ 220.059690] wlp2s0: RX ReassocResp from 00:22:90:c6:55:50 (capab=0x431 status=0 aid=57)
[ 220.059913] wlp2s0: associated
[ 220.081881] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:22:90:c6:55:50
[ 320.455887] wlp2s0: disconnect from AP 00:22:90:c6:55:50 for new auth to 00:1d:e5:4c:61:f0
[ 320.466865] wlp2s0: authenticate with 00:1d:e5:4c:61:f0
[ 320.478657] wlp2s0: send auth to 00:1d:e5:4c:61:f0 (try 1/3)
[ 320.480336] wlp2s0: authenticated
[ 320.482523] wlp2s0: associate with 00:1d:e5:4c:61:f0 (try 1/3)
[ 320.486728] wlp2s0: RX ReassocResp from 00:1d:e5:4c:61:f0 (capab=0x431 status=0 aid=136)
[ 320.486947] wlp2s0: associated
[ 320.519322] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:1d:e5:4c:61:f0
[ 346.605978] wlp2s0: disconnect from AP 00:1d:e5:4c:61:f0 for new auth to 00:22:90:c6:55:50
[ 346.612620] wlp2s0: authenticate with 00:22:90:c6:55:50
[ 346.624576] wlp2s0: send auth to 00:22:90:c6:55:50 (try 1/3)
[ 346.626668] wlp2s0: authenticated
[ 346.629236] wlp2s0: associate with 00:22:90:c6:55:50 (try 1/3)
[ 346.633409] wlp2s0: RX ReassocResp from 00:22:90:c6:55:50 (capab=0x431 status=0 aid=57)
[ 346.633722] wlp2s0: associated
[ 346.649021] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:22:90:c6:55:50
[ 394.870001] wlp2s0: authenticate with 2c:3f:38:2a:69:d0
[ 394.882112] wlp2s0: send auth to 2c:3f:38:2a:69:d0 (try 1/3)
[ 394.884880] wlp2s0: authenticated
[ 394.886009] wlp2s0: associate with 2c:3f:38:2a:69:d0 (try 1/3)
[ 394.890447] wlp2s0: RX AssocResp from 2c:3f:38:2a:69:d0 (capab=0x431 status=0 aid=4)
[ 394.890571] wlp2s0: associated
[ 394.972586] wlp2s0: Limiting TX power to 17 dBm as advertised by 2c:3f:38:2a:69:d0
[ 475.822907] ACPI Error: Needed type [Reference], found [Integer] 00000000be63f11f (20181213/exresop-69)
[ 475.822919] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
[ 475.822931] ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 475.822940] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 475.822948] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 477.876279] ACPI Error: Needed type [Reference], found [Integer] 000000002eb97987 (20181213/exresop-69)
[ 477.876330] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181213/dswexec-427)
[ 477.876337] ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 477.876342] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 477.876345] ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20181213/psparse-531)
[ 517.645873] wlp2s0: disconnect from AP 2c:3f:38:2a:69:d0 for new auth to 00:22:90:c6:55:50
[ 517.652226] wlp2s0: authenticate with 00:22:90:c6:55:50
[ 517.664617] wlp2s0: send auth to 00:22:90:c6:55:50 (try 1/3)
[ 517.666469] wlp2s0: authenticated
[ 517.669177] wlp2s0: associate with 00:22:90:c6:55:50 (try 1/3)
[ 517.673719] wlp2s0: RX ReassocResp from 00:22:90:c6:55:50 (capab=0x431 status=0 aid=57)
[ 517.673867] wlp2s0: associated
[ 517.760525] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:22:90:c6:55:50
[ 551.968367] wlp2s0: disconnect from AP 00:22:90:c6:55:50 for new auth to 00:1d:e5:4c:61:f0
[ 551.974719] wlp2s0: authenticate with 00:1d:e5:4c:61:f0
[ 551.986639] wlp2s0: send auth to 00:1d:e5:4c:61:f0 (try 1/3)
[ 551.989173] wlp2s0: authenticated
[ 551.995909] wlp2s0: associate with 00:1d:e5:4c:61:f0 (try 1/3)
[ 552.000333] wlp2s0: RX ReassocResp from 00:1d:e5:4c:61:f0 (capab=0x431 status=0 aid=136)
[ 552.000413] wlp2s0: associated
[ 552.045777] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:1d:e5:4c:61:f0
[ 586.638996] wlp2s0: disconnect from AP 00:1d:e5:4c:61:f0 for new auth to 2c:3f:38:2a:69:d0
[ 586.645125] wlp2s0: authenticate with 2c:3f:38:2a:69:d0
[ 586.657170] wlp2s0: send auth to 2c:3f:38:2a:69:d0 (try 1/3)
[ 586.659954] wlp2s0: authenticated
[ 586.662649] wlp2s0: associate with 2c:3f:38:2a:69:d0 (try 1/3)
[ 586.666292] wlp2s0: RX ReassocResp from 2c:3f:38:2a:69:d0 (capab=0x431 status=0 aid=6)
[ 586.666406] wlp2s0: associated
[ 586.739325] wlp2s0: Limiting TX power to 17 dBm as advertised by 2c:3f:38:2a:69:d0
[ 665.850876] wlp2s0: authenticate with 00:1d:e5:4c:61:f0
[ 665.863191] wlp2s0: send auth to 00:1d:e5:4c:61:f0 (try 1/3)
[ 665.864825] wlp2s0: authenticated
[ 665.865962] wlp2s0: associate with 00:1d:e5:4c:61:f0 (try 1/3)
[ 665.869751] wlp2s0: RX AssocResp from 00:1d:e5:4c:61:f0 (capab=0x431 status=0 aid=137)
[ 665.869952] wlp2s0: associated
[ 665.914694] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:1d:e5:4c:61:f0
[ 700.106199] wlp2s0: disconnect from AP 00:1d:e5:4c:61:f0 for new auth to 2c:3f:38:2a:69:d0
[ 700.112885] wlp2s0: authenticate with 2c:3f:38:2a:69:d0
[ 700.125053] wlp2s0: send auth to 2c:3f:38:2a:69:d0 (try 1/3)
[ 700.128946] wlp2s0: authenticated
[ 700.132663] wlp2s0: associate with 2c:3f:38:2a:69:d0 (try 1/3)
[ 700.138587] wlp2s0: RX ReassocResp from 2c:3f:38:2a:69:d0 (capab=0x431 status=0 aid=4)
[ 700.139241] wlp2s0: associated
[ 700.274296] wlp2s0: Limiting TX power to 17 dBm as advertised by 2c:3f:38:2a:69:d0
[ 717.917287] wlp2s0: authenticate with 00:1d:e5:4c:61:f0
[ 717.935641] wlp2s0: send auth to 00:1d:e5:4c:61:f0 (try 1/3)
[ 717.938811] wlp2s0: authenticated
[ 717.942472] wlp2s0: associate with 00:1d:e5:4c:61:f0 (try 1/3)
[ 717.947284] wlp2s0: RX AssocResp from 00:1d:e5:4c:61:f0 (capab=0x431 status=0 aid=137)
[ 717.947662] wlp2s0: associated
[ 718.036285] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:1d:e5:4c:61:f0
[ 884.089605] wlp2s0: disconnect from AP 00:1d:e5:4c:61:f0 for new auth to 2c:3f:38:2a:69:d0
[ 884.099419] wlp2s0: authenticate with 2c:3f:38:2a:69:d0
[ 884.111651] wlp2s0: send auth to 2c:3f:38:2a:69:d0 (try 1/3)
[ 884.129398] wlp2s0: authenticated
[ 884.135761] wlp2s0: associate with 2c:3f:38:2a:69:d0 (try 1/3)
[ 884.139858] wlp2s0: RX ReassocResp from 2c:3f:38:2a:69:d0 (capab=0x431 status=0 aid=3)
[ 884.140030] wlp2s0: associated
[ 884.207250] wlp2s0: Limiting TX power to 17 dBm as advertised by 2c:3f:38:2a:69:d0
[ 914.602462] audit: type=1130 audit(1554040943.652:78): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 914.602467] audit: type=1131 audit(1554040943.652:79): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1018.806389] wlp2s0: disconnect from AP 2c:3f:38:2a:69:d0 for new auth to 00:1d:e5:4c:61:f0
[ 1018.816424] wlp2s0: authenticate with 00:1d:e5:4c:61:f0
[ 1018.828422] wlp2s0: send auth to 00:1d:e5:4c:61:f0 (try 1/3)
[ 1018.830884] wlp2s0: authenticated
[ 1018.832421] wlp2s0: associate with 00:1d:e5:4c:61:f0 (try 1/3)
[ 1018.838503] wlp2s0: RX ReassocResp from 00:1d:e5:4c:61:f0 (capab=0x431 status=0 aid=142)
[ 1018.838611] wlp2s0: associated
[ 1018.887821] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:1d:e5:4c:61:f0
[ 1068.239170] wlp2s0: disconnect from AP 00:1d:e5:4c:61:f0 for new auth to 2c:3f:38:2a:69:d0
[ 1068.245433] wlp2s0: authenticate with 2c:3f:38:2a:69:d0
[ 1068.257452] wlp2s0: send auth to 2c:3f:38:2a:69:d0 (try 1/3)
[ 1068.258914] wlp2s0: authenticated
[ 1068.265749] wlp2s0: associate with 2c:3f:38:2a:69:d0 (try 1/3)
[ 1068.269767] wlp2s0: RX ReassocResp from 2c:3f:38:2a:69:d0 (capab=0x431 status=0 aid=7)
[ 1068.269886] wlp2s0: associated
[ 1068.349272] wlp2s0: Limiting TX power to 17 dBm as advertised by 2c:3f:38:2a:69:d0
[ 1081.899207] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1081.899578] ata1.00: supports DRM functions and may not be fully accessible
[ 1081.900414] ata1.00: Trusted Computing capability qword not valid!
[ 1081.901107] ata1.00: supports DRM functions and may not be fully accessible
[ 1081.902158] ata1.00: Trusted Computing capability qword not valid!
[ 1081.902171] ata1.00: configured for UDMA/133
[ 1082.100119] r8169 0000:01:00.0 enp1s0: Link is Down
[ 1169.045744] wlp2s0: disconnect from AP 2c:3f:38:2a:69:d0 for new auth to 00:1d:e5:4c:61:f0
[ 1169.052536] wlp2s0: authenticate with 00:1d:e5:4c:61:f0
[ 1169.064582] wlp2s0: send auth to 00:1d:e5:4c:61:f0 (try 1/3)
[ 1169.068564] wlp2s0: authenticated
[ 1169.072409] wlp2s0: associate with 00:1d:e5:4c:61:f0 (try 1/3)
[ 1169.079157] wlp2s0: RX ReassocResp from 00:1d:e5:4c:61:f0 (capab=0x431 status=0 aid=141)
[ 1169.079278] wlp2s0: associated
[ 1169.108951] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:1d:e5:4c:61:f0
[ 1271.768339] wlp2s0: disconnect from AP 00:1d:e5:4c:61:f0 for new auth to 2c:3f:38:2a:69:d0
[ 1271.774692] wlp2s0: authenticate with 2c:3f:38:2a:69:d0
[ 1271.786762] wlp2s0: send auth to 2c:3f:38:2a:69:d0 (try 1/3)
[ 1271.788229] wlp2s0: authenticated
[ 1271.789034] wlp2s0: associate with 2c:3f:38:2a:69:d0 (try 1/3)
[ 1271.793100] wlp2s0: RX ReassocResp from 2c:3f:38:2a:69:d0 (capab=0x431 status=0 aid=10)
[ 1271.793232] wlp2s0: associated
[ 1271.814290] wlp2s0: Limiting TX power to 17 dBm as advertised by 2c:3f:38:2a:69:d0
[ 1473.542679] wlp2s0: disconnect from AP 2c:3f:38:2a:69:d0 for new auth to 00:1d:e5:4c:61:f0
[ 1473.552394] wlp2s0: authenticate with 00:1d:e5:4c:61:f0
[ 1473.564398] wlp2s0: send auth to 00:1d:e5:4c:61:f0 (try 1/3)
[ 1473.568447] wlp2s0: authenticated
[ 1473.572343] wlp2s0: associate with 00:1d:e5:4c:61:f0 (try 1/3)
[ 1473.576804] wlp2s0: RX ReassocResp from 00:1d:e5:4c:61:f0 (capab=0x431 status=0 aid=144)
[ 1473.576958] wlp2s0: associated
[ 1473.646220] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:1d:e5:4c:61:f0
[ 1478.687746] wlp2s0: deauthenticated from 00:1d:e5:4c:61:f0 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
[ 1478.959968] wlp2s0: authenticate with 2c:3f:38:2a:69:d0
[ 1478.977075] wlp2s0: send auth to 2c:3f:38:2a:69:d0 (try 1/3)
[ 1478.979022] wlp2s0: authenticated
[ 1478.982585] wlp2s0: associate with 2c:3f:38:2a:69:d0 (try 1/3)
[ 1479.004563] wlp2s0: RX AssocResp from 2c:3f:38:2a:69:d0 (capab=0x431 status=0 aid=11)
[ 1479.004869] wlp2s0: associated
[ 1479.042492] wlp2s0: Limiting TX power to 17 dBm as advertised by 2c:3f:38:2a:69:d0
[ 1546.282434] wlp2s0: disconnect from AP 2c:3f:38:2a:69:d0 for new auth to 00:1d:e5:4c:61:f0
[ 1546.289605] wlp2s0: authenticate with 00:1d:e5:4c:61:f0
[ 1546.301716] wlp2s0: send auth to 00:1d:e5:4c:61:f0 (try 1/3)
[ 1546.303327] wlp2s0: authenticated
[ 1546.306298] wlp2s0: associate with 00:1d:e5:4c:61:f0 (try 1/3)
[ 1546.310385] wlp2s0: RX ReassocResp from 00:1d:e5:4c:61:f0 (capab=0x431 status=0 aid=145)
[ 1546.310481] wlp2s0: associated
[ 1546.350474] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:1d:e5:4c:61:f0
[ 1580.732631] wlp2s0: disconnect from AP 00:1d:e5:4c:61:f0 for new auth to 2c:3f:38:2a:69:d0
[ 1580.739107] wlp2s0: authenticate with 2c:3f:38:2a:69:d0
[ 1580.751216] wlp2s0: send auth to 2c:3f:38:2a:69:d0 (try 1/3)
[ 1580.753631] wlp2s0: authenticated
[ 1580.759021] wlp2s0: associate with 2c:3f:38:2a:69:d0 (try 1/3)
[ 1580.765103] wlp2s0: RX ReassocResp from 2c:3f:38:2a:69:d0 (capab=0x431 status=0 aid=11)
[ 1580.765231] wlp2s0: associated
[ 1580.772426] wlp2s0: Limiting TX power to 17 dBm as advertised by 2c:3f:38:2a:69:d0
[ 1711.481229] audit: type=1130 audit(1554041740.532:80): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1741.849085] wlp2s0: disconnect from AP 2c:3f:38:2a:69:d0 for new auth to 00:1d:e5:4c:61:f0
[ 1741.855401] wlp2s0: authenticate with 00:1d:e5:4c:61:f0
[ 1741.867725] wlp2s0: send auth to 00:1d:e5:4c:61:f0 (try 1/3)
[ 1741.869393] wlp2s0: authenticated
[ 1741.873354] wlp2s0: associate with 00:1d:e5:4c:61:f0 (try 1/3)
[ 1741.877062] wlp2s0: RX ReassocResp from 00:1d:e5:4c:61:f0 (capab=0x431 status=0 aid=145)
[ 1741.877172] wlp2s0: associated
[ 1741.934451] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:1d:e5:4c:61:f0
[ 1748.726124] audit: type=1131 audit(1554041777.779:81): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1808.825724] wlp2s0: disconnect from AP 00:1d:e5:4c:61:f0 for new auth to 2c:3f:38:2a:69:d0
[ 1808.832280] wlp2s0: authenticate with 2c:3f:38:2a:69:d0
[ 1808.844439] wlp2s0: send auth to 2c:3f:38:2a:69:d0 (try 1/3)
[ 1808.848102] wlp2s0: authenticated
[ 1808.849024] wlp2s0: associate with 2c:3f:38:2a:69:d0 (try 1/3)
[ 1808.854379] wlp2s0: RX ReassocResp from 2c:3f:38:2a:69:d0 (capab=0x431 status=0 aid=13)
[ 1808.854512] wlp2s0: associated
[ 1808.899305] wlp2s0: Limiting TX power to 17 dBm as advertised by 2c:3f:38:2a:69:d0
[ 1827.520463] Rekeying PTK for STA 2c:3f:38:2a:69:d0 but driver can't safely do that.
[ 1842.762632] wlp2s0: disconnect from AP 2c:3f:38:2a:69:d0 for new auth to 00:1d:e5:4c:61:f0
[ 1842.769154] wlp2s0: authenticate with 00:1d:e5:4c:61:f0
[ 1842.781156] wlp2s0: send auth to 00:1d:e5:4c:61:f0 (try 1/3)
[ 1842.784830] wlp2s0: authenticated
[ 1842.786113] wlp2s0: associate with 00:1d:e5:4c:61:f0 (try 1/3)
[ 1842.789790] wlp2s0: RX ReassocResp from 00:1d:e5:4c:61:f0 (capab=0x431 status=0 aid=145)
[ 1842.789899] wlp2s0: associated
[ 1842.798676] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:1d:e5:4c:61:f0Last edited by anykk (2019-03-31 14:44:47)
Offline
#7 2019-03-31 14:41:19
- anykk
- Member
- Registered: 2019-03-30
- Posts: 7
Re: AMDGPU driver problem
full lspci -k:
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Complex
Subsystem: Dell Family 15h (Models 60h-6fh) Processor Root Complex
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) I/O Memory Management Unit
Subsystem: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) I/O Memory Management Unit
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wani [Radeon R5/R6/R7 Graphics] (rev c5)
Subsystem: Dell Radeon R6 Graphics
Kernel driver in use: amdgpu
Kernel modules: amdgpu
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio
Subsystem: Dell Kabini HDMI/DP Audio
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Host Bridge
DeviceName: Onboard IGD
00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Port
Kernel driver in use: pcieport
00:02.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Port
Kernel driver in use: pcieport
00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Host Bridge
00:03.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Root Port
Kernel driver in use: pcieport
00:08.0 Encryption controller: Advanced Micro Devices, Inc. [AMD] Carrizo Platform Security Processor
Subsystem: Advanced Micro Devices, Inc. [AMD] Carrizo Platform Security Processor
00:09.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Carrizo Audio Dummy Host Bridge
00:09.2 Audio device: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Audio Controller
Subsystem: Dell Family 15h (Models 60h-6fh) Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 20)
Subsystem: Dell FCH USB XHCI Controller
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 49)
Subsystem: Dell FCH SATA Controller [AHCI mode]
Kernel driver in use: ahci
Kernel modules: ahci
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 49)
Subsystem: Dell FCH USB EHCI Controller
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 4a)
Subsystem: Dell FCH SMBus Controller
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4, sp5100_tco
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
Subsystem: Dell FCH LPC Bridge
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 3
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 4
Kernel driver in use: fam15h_power
Kernel modules: fam15h_power
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 60h-6fh) Processor Function 5
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller (rev 07)
Subsystem: Dell RTL810xE PCI Express Fast Ethernet controller
Kernel driver in use: r8169
Kernel modules: r8169
02:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
Subsystem: Dell QCA9565 / AR9565 Wireless Network Adapter
Kernel driver in use: ath9k
Kernel modules: ath9k
03:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430 / R7 M520] (rev 81)
Subsystem: Dell Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430 / Radeon 520 Mobile]
Kernel driver in use: radeon
Kernel modules: radeon, amdgpuglxinfo -B:
name of display: :0
display: :0 screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
Vendor: X.Org (0x1002)
Device: AMD Radeon R6 Graphics (CARRIZO, DRM 3.27.0, 5.0.5-arch1-1-ARCH, LLVM 7.0.1) (0x9874)
Version: 19.0.0
Accelerated: yes
Video memory: 512MB
Unified memory: no
Preferred profile: core (0x1)
Max core profile version: 4.5
Max compat profile version: 4.5
Max GLES1 profile version: 1.1
Max GLES[23] profile version: 3.2
Memory info (GL_ATI_meminfo):
VBO free memory - total: 363 MB, largest block: 363 MB
VBO free aux. memory - total: 3027 MB, largest block: 3027 MB
Texture free memory - total: 363 MB, largest block: 363 MB
Texture free aux. memory - total: 3027 MB, largest block: 3027 MB
Renderbuffer free memory - total: 363 MB, largest block: 363 MB
Renderbuffer free aux. memory - total: 3027 MB, largest block: 3027 MB
Memory info (GL_NVX_gpu_memory_info):
Dedicated video memory: 512 MB
Total available memory: 3584 MB
Currently available dedicated video memory: 363 MB
OpenGL vendor string: X.Org
OpenGL renderer string: AMD Radeon R6 Graphics (CARRIZO, DRM 3.27.0, 5.0.5-arch1-1-ARCH, LLVM 7.0.1)
OpenGL core profile version string: 4.5 (Core Profile) Mesa 19.0.0
OpenGL core profile shading language version string: 4.50
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL version string: 4.5 (Compatibility Profile) Mesa 19.0.0
OpenGL shading language version string: 4.50
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile
OpenGL ES profile version string: OpenGL ES 3.2 Mesa 19.0.0
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20Offline
#8 2019-03-31 14:47:06
- anykk
- Member
- Registered: 2019-03-30
- Posts: 7
Re: AMDGPU driver problem
Now I'm reinstalled both xf86-video drivers for ati and radeon and now I have
Providers: number : 2
Provider 0: id: 0x74 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 1 name:AMD Radeon R6 Graphics @ pci:0000:00:01.0
Provider 1: id: 0x3f cap: 0xd, Source Output, Source Offload, Sink Offload crtcs: 0 outputs: 0 associated providers: 1 name:HAINAN @ pci:0000:03:00.0Offline
#9 2019-03-31 15:04:41
- anykk
- Member
- Registered: 2019-03-30
- Posts: 7
Re: AMDGPU driver problem
loqs wrote:
Please post the output of dmesg and the contents of Xorg.log. Please do not use -x when posting journalctl output.
I posted it, input with and without -x was the same for me, so I didn't update it
Offline
#10 2019-03-31 17:38:31
- loqs
- Member
- Registered: 2014-03-06
- Posts: 18,603
Re: AMDGPU driver problem
anykk wrote:
loqs wrote:Please post the output of dmesg and the contents of Xorg.log. Please do not use -x when posting journalctl output.
I posted it, input with and without -x was the same for me, so I didn't update it
Are you stating `journalctl -b -p 3` did not produce:
-- Logs begin at Thu 2019-03-28 14:56:36 +05, end at Sat 2019-03-30 15:32:07 +05. --
Mar 30 15:15:09 arch kernel: tpm_crb MSFT0101:00: can't request region for resource [mem 0xce026000-0xce026fff]
Mar 30 15:15:09 arch kernel: sp5100-tco sp5100-tco: Watchdog hardware is disabled
Mar 30 15:15:12 arch kernel: [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3
Mar 30 15:15:13 arch systemd-backlight[710]: Failed to get backlight or LED device 'backlight:acpi_video0': No such device
Mar 30 15:15:13 arch systemd[1]: Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video0.
Mar 30 15:15:13 arch systemd-backlight[711]: Failed to get backlight or LED device 'backlight:acpi_video1': No such device
Mar 30 15:15:13 arch systemd[1]: Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video1.
Mar 30 15:31:12 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 0000000013941e59 (20180810/exresop-69)
Mar 30 15:31:12 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20180810/dswexec-427)
Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:12 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 000000007b6486a8 (20180810/exresop-69)
Mar 30 15:31:12 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20180810/dswexec-427)
Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:22 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 000000007b6486a8 (20180810/exresop-69)
Mar 30 15:31:22 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20180810/dswexec-427)
Mar 30 15:31:22 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:22 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:22 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:25 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 0000000065dd9078 (20180810/exresop-69)
Mar 30 15:31:25 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20180810/dswexec-427)
Mar 30 15:31:25 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:25 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:25 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20180810/psparse-516)but still produced:
-- Logs begin at Thu 2019-03-28 14:56:36 +05, end at Sat 2019-03-30 15:32:07 +05. --
Mar 30 15:15:09 arch kernel: tpm_crb MSFT0101:00: can't request region for resource [mem 0xce026000-0xce026fff]
Mar 30 15:15:09 arch kernel: sp5100-tco sp5100-tco: Watchdog hardware is disabled
Mar 30 15:15:12 arch kernel: [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3
Mar 30 15:15:13 arch systemd-backlight[710]: Failed to get backlight or LED device 'backlight:acpi_video0': No such device
Mar 30 15:15:13 arch systemd[1]: Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video0.
-- Subject: A start job for unit systemd-backlight@backlight:acpi_video0.service has failed
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- A start job for unit systemd-backlight@backlight:acpi_video0.service has finished with a failure.
--
-- The job identifier is 490 and the job result is failed.
Mar 30 15:15:13 arch systemd-backlight[711]: Failed to get backlight or LED device 'backlight:acpi_video1': No such device
Mar 30 15:15:13 arch systemd[1]: Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video1.
-- Subject: A start job for unit systemd-backlight@backlight:acpi_video1.service has failed
-- Defined-By: systemd
-- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- A start job for unit systemd-backlight@backlight:acpi_video1.service has finished with a failure.
--
-- The job identifier is 484 and the job result is failed.
Mar 30 15:31:12 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 0000000013941e59 (20180810/exresop-69)
Mar 30 15:31:12 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20180810/dswexec-427)
Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:12 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 000000007b6486a8 (20180810/exresop-69)
Mar 30 15:31:12 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20180810/dswexec-427)
Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:22 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 000000007b6486a8 (20180810/exresop-69)
Mar 30 15:31:22 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20180810/dswexec-427)
Mar 30 15:31:22 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:22 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:22 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:25 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 0000000065dd9078 (20180810/exresop-69)
Mar 30 15:31:25 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20180810/dswexec-427)
Mar 30 15:31:25 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:25 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Mar 30 15:31:25 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20180810/psparse-516)Offline
#11 2019-03-31 17:50:04
- anykk
- Member
- Registered: 2019-03-30
- Posts: 7
Re: AMDGPU driver problem
loqs wrote:
anykk wrote:loqs wrote:Please post the output of dmesg and the contents of Xorg.log. Please do not use -x when posting journalctl output.
I posted it, input with and without -x was the same for me, so I didn't update it
Are you stating `journalctl -b -p 3` did not produce:
-- Logs begin at Thu 2019-03-28 14:56:36 +05, end at Sat 2019-03-30 15:32:07 +05. -- Mar 30 15:15:09 arch kernel: tpm_crb MSFT0101:00: can't request region for resource [mem 0xce026000-0xce026fff] Mar 30 15:15:09 arch kernel: sp5100-tco sp5100-tco: Watchdog hardware is disabled Mar 30 15:15:12 arch kernel: [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3 Mar 30 15:15:13 arch systemd-backlight[710]: Failed to get backlight or LED device 'backlight:acpi_video0': No such device Mar 30 15:15:13 arch systemd[1]: Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video0. Mar 30 15:15:13 arch systemd-backlight[711]: Failed to get backlight or LED device 'backlight:acpi_video1': No such device Mar 30 15:15:13 arch systemd[1]: Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video1. Mar 30 15:31:12 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 0000000013941e59 (20180810/exresop-69) Mar 30 15:31:12 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20180810/dswexec-427) Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:12 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 000000007b6486a8 (20180810/exresop-69) Mar 30 15:31:12 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20180810/dswexec-427) Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:22 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 000000007b6486a8 (20180810/exresop-69) Mar 30 15:31:22 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20180810/dswexec-427) Mar 30 15:31:22 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:22 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:22 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:25 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 0000000065dd9078 (20180810/exresop-69) Mar 30 15:31:25 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20180810/dswexec-427) Mar 30 15:31:25 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:25 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:25 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20180810/psparse-516)but still produced:
-- Logs begin at Thu 2019-03-28 14:56:36 +05, end at Sat 2019-03-30 15:32:07 +05. -- Mar 30 15:15:09 arch kernel: tpm_crb MSFT0101:00: can't request region for resource [mem 0xce026000-0xce026fff] Mar 30 15:15:09 arch kernel: sp5100-tco sp5100-tco: Watchdog hardware is disabled Mar 30 15:15:12 arch kernel: [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3 Mar 30 15:15:13 arch systemd-backlight[710]: Failed to get backlight or LED device 'backlight:acpi_video0': No such device Mar 30 15:15:13 arch systemd[1]: Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video0. -- Subject: A start job for unit systemd-backlight@backlight:acpi_video0.service has failed -- Defined-By: systemd -- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- A start job for unit systemd-backlight@backlight:acpi_video0.service has finished with a failure. -- -- The job identifier is 490 and the job result is failed. Mar 30 15:15:13 arch systemd-backlight[711]: Failed to get backlight or LED device 'backlight:acpi_video1': No such device Mar 30 15:15:13 arch systemd[1]: Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video1. -- Subject: A start job for unit systemd-backlight@backlight:acpi_video1.service has failed -- Defined-By: systemd -- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- A start job for unit systemd-backlight@backlight:acpi_video1.service has finished with a failure. -- -- The job identifier is 484 and the job result is failed. Mar 30 15:31:12 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 0000000013941e59 (20180810/exresop-69) Mar 30 15:31:12 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20180810/dswexec-427) Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:12 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 000000007b6486a8 (20180810/exresop-69) Mar 30 15:31:12 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20180810/dswexec-427) Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:12 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:22 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 000000007b6486a8 (20180810/exresop-69) Mar 30 15:31:22 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20180810/dswexec-427) Mar 30 15:31:22 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:22 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:22 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:25 arch kernel: ACPI Error: Needed type [Reference], found [Integer] 0000000065dd9078 (20180810/exresop-69) Mar 30 15:31:25 arch kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20180810/dswexec-427) Mar 30 15:31:25 arch kernel: ACPI Error: Method parse/execution failed \_SB.OPPC, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:25 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0.TPAF, AE_AML_OPERAND_TYPE (20180810/psparse-516) Mar 30 15:31:25 arch kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SBRG.EC0._Q1D, AE_AML_OPERAND_TYPE (20180810/psparse-516)
Sorry, maybe I didn't understand you or vice versa. For make it easier, I will do journalctl -b -p 3 again:
-- Logs begin at Thu 2019-03-28 14:56:36 +05, end at Sun 2019-03-31 22:41:36 +05. --
Mar 31 22:40:45 arch kernel: [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3
Mar 31 22:40:45 arch kernel: tpm_crb MSFT0101:00: can't request region for resource [mem 0xce026000-0xce026fff]
Mar 31 22:40:45 arch kernel: sp5100-tco sp5100-tco: Watchdog hardware is disabledIdk why, but sometimes I have ACPI errors and sometimes not.
Last edited by anykk (2019-03-31 17:50:50)
Offline
Pages: 1