[Solved] HDMI output not listed in pavucontrol

ottoshmidt · 2019-04-16 17:03:39

Even though pavucontrol doesn't list hdmi output, the speaker-test works with hdmi:

speaker-test -D hdmi:CARD=PCH,DEV=0 -c 2

sends noise to TV.

pacmd list-sinks:

1 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: (none)
	priority: 9039
	volume: front-left: 39037 /  60% / -13.50 dB,   front-right: 39037 /  60% / -13.50 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 32.87 ms
	max request: 7 KiB
	max rewind: 7 KiB
	monitor source: 0
	sample spec: s16le 2ch 48000Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 1
	configured latency: 40.00 ms; range is 0.50 .. 2000.00 ms
	card: 0 <alsa_card.pci-0000_00_1b.0>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC269VC Analog"
		alsa.id = "ALC269VC Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xc2600000 irq 29"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "1e20"
		device.product.name = "7 Series/C216 Chipset Family High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "384000"
		device.buffering.fragment_size = "192000"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Built-in Audio Analog Stereo"
		alsa.mixer_name = "Realtek ALC269VC"
		alsa.components = "HDA:10ec0269,103c1854,00100202 HDA:80862806,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-speaker>

pacmd list-cards:

1 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_00_1b.0>
	driver: <module-alsa-card.c>
	owner module: 6
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xc2600000 irq 29"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1b.0"
		sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "1e20"
		device.product.name = "7 Series/C216 Chipset Family High Definition Audio Controller"
		device.form_factor = "internal"
		device.string = "0"
		device.description = "Built-in Audio"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analog Stereo Input (priority 65, available: unknown)
		output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: unknown)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: unknown)
		output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 5965, available: unknown)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: unknown)
		output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (priority 865, available: unknown)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: unknown)
		output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Analog Stereo Input (priority 865, available: unknown)
		off: Off (priority 0, available: unknown)
	active profile: <output:analog-stereo+input:analog-stereo>
	sinks:
		alsa_output.pci-0000_00_1b.0.analog-stereo/#0: Built-in Audio Analog Stereo
	sources:
		alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
		alsa_input.pci-0000_00_1b.0.analog-stereo/#1: Built-in Audio Analog Stereo
	ports:
		analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "video-display"
				device.product.name = "TV-monitor"

aplay -l

**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC269VC Analog [ALC269VC Analog]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Why doesn't pavucontrol list hdmi?

Last edited by ottoshmidt (2019-04-17 06:40:46)

V1del · 2019-04-16 19:22:23

		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "video-display"
				device.product.name = "TV-monitor"

On laptops like these the HDMI port is part of the same card but available as a different subdevice. In pulseaudio terms pulseaudio will create a separate profile for HDMI card, which you can switch in pavucontrol's configuration tab and/or

pacmd set-card-profile alsa_card.pci-0000_00_1b.0 hdmi-output-0

ottoshmidt · 2019-04-17 06:40:16

V1del wrote:

		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "video-display"
				device.product.name = "TV-monitor"
On laptops like these the HDMI port is part of the same card but available as a different subdevice. In pulseaudio terms pulseaudio will create a separate profile for HDMI card, which you can switch in pavucontrol's configuration tab and/or
pacmd set-card-profile alsa_card.pci-0000_00_1b.0 hdmi-output-0

Hah, never checked the configuration tab. Thanks, mate!

Ren Heika · 2022-04-28 19:28:26

V1del wrote:

		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "video-display"
				device.product.name = "TV-monitor"
On laptops like these the HDMI port is part of the same card but available as a different subdevice. In pulseaudio terms pulseaudio will create a separate profile for HDMI card, which you can switch in pavucontrol's configuration tab and/or
pacmd set-card-profile alsa_card.pci-0000_00_1b.0 hdmi-output-0

As a newbie to arch this had me scratching my head for a while, so thank you!

Arch Linux

#1 2019-04-16 17:03:39

[Solved] HDMI output not listed in pavucontrol

#2 2019-04-16 19:22:23

Re: [Solved] HDMI output not listed in pavucontrol

#3 2019-04-17 06:40:16

Re: [Solved] HDMI output not listed in pavucontrol

#4 2022-04-28 19:28:26

Re: [Solved] HDMI output not listed in pavucontrol

Board footer